Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 155 insertions, 0 deletions

diff --git a/drivers/media/usb/stk1160/stk1160-ac97.c b/drivers/media/usb/stk1160/stk1160-ac97.c
new file mode 100644
index 0000000000..79762db848
--- /dev/null
+++ b/drivers/media/usb/stk1160/stk1160-ac97.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * STK1160 driver
+ *
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ * Copyright (C) 2016 Marcel Hasler
+ * <mahasler--a.t--gmail.com>
+ *
+ * Based on Easycap driver by R.M. Thomas
+ *	Copyright (C) 2010 R.M. Thomas
+ *	<rmthomas--a.t--sciolus.org>
+ */
+
+#include <linux/delay.h>
+
+#include "stk1160.h"
+#include "stk1160-reg.h"
+
+static int stk1160_ac97_wait_transfer_complete(struct stk1160 *dev)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(STK1160_AC97_TIMEOUT);
+	u8 value;
+
+	/* Wait for AC97 transfer to complete */
+	while (time_is_after_jiffies(timeout)) {
+		stk1160_read_reg(dev, STK1160_AC97CTL_0, &value);
+
+		if (!(value & (STK1160_AC97CTL_0_CR | STK1160_AC97CTL_0_CW)))
+			return 0;
+
+		usleep_range(50, 100);
+	}
+
+	stk1160_err("AC97 transfer took too long, this should never happen!");
+	return -EBUSY;
+}
+
+static void stk1160_write_ac97(struct stk1160 *dev, u16 reg, u16 value)
+{
+	/* Set codec register address */
+	stk1160_write_reg(dev, STK1160_AC97_ADDR, reg);
+
+	/* Set codec command */
+	stk1160_write_reg(dev, STK1160_AC97_CMD, value & 0xff);
+	stk1160_write_reg(dev, STK1160_AC97_CMD + 1, (value & 0xff00) >> 8);
+
+	/* Set command write bit to initiate write operation */
+	stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x8c);
+
+	/* Wait for command write bit to be cleared */
+	stk1160_ac97_wait_transfer_complete(dev);
+}
+
+#ifdef DEBUG
+static u16 stk1160_read_ac97(struct stk1160 *dev, u16 reg)
+{
+	u8 vall = 0;
+	u8 valh = 0;
+
+	/* Set codec register address */
+	stk1160_write_reg(dev, STK1160_AC97_ADDR, reg);
+
+	/* Set command read bit to initiate read operation */
+	stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x8b);
+
+	/* Wait for command read bit to be cleared */
+	if (stk1160_ac97_wait_transfer_complete(dev) < 0)
+		return 0;
+
+
+	/* Retrieve register value */
+	stk1160_read_reg(dev, STK1160_AC97_CMD, &vall);
+	stk1160_read_reg(dev, STK1160_AC97_CMD + 1, &valh);
+
+	return (valh << 8) | vall;
+}
+
+void stk1160_ac97_dump_regs(struct stk1160 *dev)
+{
+	u16 value;
+
+	value = stk1160_read_ac97(dev, 0x12); /* CD volume */
+	stk1160_dbg("0x12 == 0x%04x", value);
+
+	value = stk1160_read_ac97(dev, 0x10); /* Line-in volume */
+	stk1160_dbg("0x10 == 0x%04x", value);
+
+	value = stk1160_read_ac97(dev, 0x0e); /* MIC volume (mono) */
+	stk1160_dbg("0x0e == 0x%04x", value);
+
+	value = stk1160_read_ac97(dev, 0x16); /* Aux volume */
+	stk1160_dbg("0x16 == 0x%04x", value);
+
+	value = stk1160_read_ac97(dev, 0x1a); /* Record select */
+	stk1160_dbg("0x1a == 0x%04x", value);
+
+	value = stk1160_read_ac97(dev, 0x02); /* Master volume */
+	stk1160_dbg("0x02 == 0x%04x", value);
+
+	value = stk1160_read_ac97(dev, 0x1c); /* Record gain */
+	stk1160_dbg("0x1c == 0x%04x", value);
+}
+#endif
+
+static int stk1160_has_audio(struct stk1160 *dev)
+{
+	u8 value;
+
+	stk1160_read_reg(dev, STK1160_POSV_L, &value);
+	return !(value & STK1160_POSV_L_ACDOUT);
+}
+
+static int stk1160_has_ac97(struct stk1160 *dev)
+{
+	u8 value;
+
+	stk1160_read_reg(dev, STK1160_POSV_L, &value);
+	return !(value & STK1160_POSV_L_ACSYNC);
+}
+
+void stk1160_ac97_setup(struct stk1160 *dev)
+{
+	if (!stk1160_has_audio(dev)) {
+		stk1160_info("Device doesn't support audio, skipping AC97 setup.");
+		return;
+	}
+
+	if (!stk1160_has_ac97(dev)) {
+		stk1160_info("Device uses internal 8-bit ADC, skipping AC97 setup.");
+		return;
+	}
+
+	/* Two-step reset AC97 interface and hardware codec */
+	stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x94);
+	stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x8c);
+
+	/* Set 16-bit audio data and choose L&R channel*/
+	stk1160_write_reg(dev, STK1160_AC97CTL_1 + 2, 0x01);
+	stk1160_write_reg(dev, STK1160_AC97CTL_1 + 3, 0x00);
+
+	/* Setup channels */
+	stk1160_write_ac97(dev, 0x12, 0x8808); /* CD volume */
+	stk1160_write_ac97(dev, 0x10, 0x0808); /* Line-in volume */
+	stk1160_write_ac97(dev, 0x0e, 0x0008); /* MIC volume (mono) */
+	stk1160_write_ac97(dev, 0x16, 0x0808); /* Aux volume */
+	stk1160_write_ac97(dev, 0x1a, 0x0404); /* Record select */
+	stk1160_write_ac97(dev, 0x02, 0x0000); /* Master volume */
+	stk1160_write_ac97(dev, 0x1c, 0x0808); /* Record gain */
+
+#ifdef DEBUG
+	stk1160_ac97_dump_regs(dev);
+#endif
+}