Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 303 insertions, 0 deletions

diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
new file mode 100644
index 000000000..de5d894ac
--- /dev/null
+++ b/drivers/mfd/arizona-spi.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arizona-spi.c  --  Arizona SPI bus interface
+ *
+ * Copyright 2012 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/of.h>
+#include <uapi/linux/input-event-codes.h>
+
+#include <linux/mfd/arizona/core.h>
+
+#include "arizona.h"
+
+#ifdef CONFIG_ACPI
+static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
+static const struct acpi_gpio_params ldoena_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping arizona_acpi_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1, },
+	{ "wlf,ldoena-gpios", &ldoena_gpios, 1 },
+	{ }
+};
+
+/*
+ * The ACPI resources for the device only describe external GPIO-s. They do
+ * not provide mappings for the GPIO-s coming from the Arizona codec itself.
+ */
+static const struct gpiod_lookup arizona_soc_gpios[] = {
+	{ "arizona", 2, "wlf,spkvdd-ena", 0, GPIO_ACTIVE_HIGH },
+	{ "arizona", 4, "wlf,micd-pol", 0, GPIO_ACTIVE_LOW },
+};
+
+static void arizona_spi_acpi_remove_lookup(void *lookup)
+{
+	gpiod_remove_lookup_table(lookup);
+}
+
+/* For ACPI tables from boards which ship with Windows as factory OS */
+static int arizona_spi_acpi_windows_probe(struct arizona *arizona)
+{
+	struct gpiod_lookup_table *lookup;
+	acpi_status status;
+	int ret;
+
+	/* Add mappings for the 2 ACPI declared GPIOs used for reset and ldo-ena */
+	devm_acpi_dev_add_driver_gpios(arizona->dev, arizona_acpi_gpios);
+
+	/* Add lookups for the SoCs own GPIOs used for micdet-polarity and spkVDD-enable */
+	lookup = devm_kzalloc(arizona->dev,
+			      struct_size(lookup, table, ARRAY_SIZE(arizona_soc_gpios) + 1),
+			      GFP_KERNEL);
+	if (!lookup)
+		return -ENOMEM;
+
+	lookup->dev_id = dev_name(arizona->dev);
+	memcpy(lookup->table, arizona_soc_gpios, sizeof(arizona_soc_gpios));
+
+	gpiod_add_lookup_table(lookup);
+	ret = devm_add_action_or_reset(arizona->dev, arizona_spi_acpi_remove_lookup, lookup);
+	if (ret)
+		return ret;
+
+	/* Enable 32KHz clock from SoC to codec for jack-detect */
+	status = acpi_evaluate_object(ACPI_HANDLE(arizona->dev), "CLKE", NULL, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(arizona->dev, "Failed to enable 32KHz clk ACPI error %d\n", status);
+
+	return 0;
+}
+
+/* For ACPI tables from boards which ship with Android as factory OS */
+static int arizona_spi_acpi_android_probe(struct arizona *arizona)
+{
+	int ret;
+
+	/*
+	 * Get the reset GPIO, treating -ENOENT as -EPROBE_DEFER to wait for
+	 * the x86-android-tablets module to register the board specific GPIO
+	 * lookup table.
+	 */
+	arizona->pdata.reset = devm_gpiod_get(arizona->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(arizona->pdata.reset)) {
+		ret = PTR_ERR(arizona->pdata.reset);
+		if (ret == -ENOENT) {
+			dev_info_once(arizona->dev,
+				      "Deferring probe till GPIO lookup is registered\n");
+			ret = -EPROBE_DEFER;
+		}
+		return dev_err_probe(arizona->dev, ret, "getting reset GPIO\n");
+	}
+
+	return 0;
+}
+
+/*
+ * The AOSP 3.5 mm Headset: Accessory Specification gives the following values:
+ * Function A Play/Pause:           0 ohm
+ * Function D Voice assistant:    135 ohm
+ * Function B Volume Up           240 ohm
+ * Function C Volume Down         470 ohm
+ * Minimum Mic DC resistance     1000 ohm
+ * Minimum Ear speaker impedance   16 ohm
+ * Note the first max value below must be less then the min. speaker impedance,
+ * to allow CTIA/OMTP detection to work. The other max values are the closest
+ * value from extcon-arizona.c:arizona_micd_levels halfway 2 button resistances.
+ */
+static const struct arizona_micd_range arizona_micd_aosp_ranges[] = {
+	{ .max =  11, .key = KEY_PLAYPAUSE },
+	{ .max = 186, .key = KEY_VOICECOMMAND },
+	{ .max = 348, .key = KEY_VOLUMEUP },
+	{ .max = 752, .key = KEY_VOLUMEDOWN },
+};
+
+static int arizona_spi_acpi_probe(struct arizona *arizona)
+{
+	struct acpi_device *adev = ACPI_COMPANION(arizona->dev);
+	int ret;
+
+	if (acpi_dev_hid_uid_match(adev, "10WM5102", NULL))
+		ret = arizona_spi_acpi_android_probe(arizona);
+	else
+		ret = arizona_spi_acpi_windows_probe(arizona);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Some DSDTs wrongly declare the IRQ trigger-type as IRQF_TRIGGER_FALLING
+	 * The IRQ line will stay low when a new IRQ event happens between reading
+	 * the IRQ status flags and acknowledging them. When the IRQ line stays
+	 * low like this the IRQ will never trigger again when its type is set
+	 * to IRQF_TRIGGER_FALLING. Correct the IRQ trigger-type to fix this.
+	 *
+	 * Note theoretically it is possible that some boards are not capable
+	 * of handling active low level interrupts. In that case setting the
+	 * flag to IRQF_TRIGGER_FALLING would not be a bug (and we would need
+	 * to work around this) but so far all known usages of IRQF_TRIGGER_FALLING
+	 * are a bug in the board's DSDT.
+	 */
+	arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;
+
+	/* Wait 200 ms after jack insertion */
+	arizona->pdata.micd_detect_debounce = 200;
+
+	/* Use standard AOSP values for headset-button mappings */
+	arizona->pdata.micd_ranges = arizona_micd_aosp_ranges;
+	arizona->pdata.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges);
+
+	/* Use left headphone speaker for HP vs line-out detection */
+	arizona->pdata.hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
+
+	return 0;
+}
+
+static const struct acpi_device_id arizona_acpi_match[] = {
+	{
+		.id = "WM510204",
+		.driver_data = WM5102,
+	},
+	{
+		.id = "WM510205",
+		.driver_data = WM5102,
+	},
+	{
+		.id = "10WM5102",
+		.driver_data = WM5102,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, arizona_acpi_match);
+#else
+static int arizona_spi_acpi_probe(struct arizona *arizona)
+{
+	return -ENODEV;
+}
+#endif
+
+static int arizona_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	const void *match_data;
+	struct arizona *arizona;
+	const struct regmap_config *regmap_config = NULL;
+	unsigned long type = 0;
+	int ret;
+
+	match_data = device_get_match_data(&spi->dev);
+	if (match_data)
+		type = (unsigned long)match_data;
+	else if (id)
+		type = id->driver_data;
+
+	switch (type) {
+	case WM5102:
+		if (IS_ENABLED(CONFIG_MFD_WM5102))
+			regmap_config = &wm5102_spi_regmap;
+		break;
+	case WM5110:
+	case WM8280:
+		if (IS_ENABLED(CONFIG_MFD_WM5110))
+			regmap_config = &wm5110_spi_regmap;
+		break;
+	case WM1831:
+	case CS47L24:
+		if (IS_ENABLED(CONFIG_MFD_CS47L24))
+			regmap_config = &cs47l24_spi_regmap;
+		break;
+	default:
+		dev_err(&spi->dev, "Unknown device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	if (!regmap_config) {
+		dev_err(&spi->dev,
+			"No kernel support for device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	arizona = devm_kzalloc(&spi->dev, sizeof(*arizona), GFP_KERNEL);
+	if (arizona == NULL)
+		return -ENOMEM;
+
+	arizona->regmap = devm_regmap_init_spi(spi, regmap_config);
+	if (IS_ERR(arizona->regmap)) {
+		ret = PTR_ERR(arizona->regmap);
+		dev_err(&spi->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	arizona->type = type;
+	arizona->dev = &spi->dev;
+	arizona->irq = spi->irq;
+
+	if (has_acpi_companion(&spi->dev)) {
+		ret = arizona_spi_acpi_probe(arizona);
+		if (ret)
+			return ret;
+	}
+
+	return arizona_dev_init(arizona);
+}
+
+static void arizona_spi_remove(struct spi_device *spi)
+{
+	struct arizona *arizona = spi_get_drvdata(spi);
+
+	arizona_dev_exit(arizona);
+}
+
+static const struct spi_device_id arizona_spi_ids[] = {
+	{ "wm5102", WM5102 },
+	{ "wm5110", WM5110 },
+	{ "wm8280", WM8280 },
+	{ "wm1831", WM1831 },
+	{ "cs47l24", CS47L24 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id arizona_spi_of_match[] = {
+	{ .compatible = "wlf,wm5102", .data = (void *)WM5102 },
+	{ .compatible = "wlf,wm5110", .data = (void *)WM5110 },
+	{ .compatible = "wlf,wm8280", .data = (void *)WM8280 },
+	{ .compatible = "wlf,wm1831", .data = (void *)WM1831 },
+	{ .compatible = "cirrus,cs47l24", .data = (void *)CS47L24 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, arizona_spi_of_match);
+#endif
+
+static struct spi_driver arizona_spi_driver = {
+	.driver = {
+		.name	= "arizona",
+		.pm	= pm_ptr(&arizona_pm_ops),
+		.of_match_table	= of_match_ptr(arizona_spi_of_match),
+		.acpi_match_table = ACPI_PTR(arizona_acpi_match),
+	},
+	.probe		= arizona_spi_probe,
+	.remove		= arizona_spi_remove,
+	.id_table	= arizona_spi_ids,
+};
+
+module_spi_driver(arizona_spi_driver);
+
+MODULE_SOFTDEP("pre: arizona_ldo1");
+MODULE_DESCRIPTION("Arizona SPI bus interface");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");