diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/mfd/wcd934x.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | drivers/mfd/wcd934x.c | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/drivers/mfd/wcd934x.c b/drivers/mfd/wcd934x.c new file mode 100644 index 0000000000..6b942d5270 --- /dev/null +++ b/drivers/mfd/wcd934x.c @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019, Linaro Limited + +#include <linux/clk.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/core.h> +#include <linux/mfd/wcd934x/registers.h> +#include <linux/mfd/wcd934x/wcd934x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slimbus.h> + +#define WCD934X_REGMAP_IRQ_REG(_irq, _off, _mask) \ + [_irq] = { \ + .reg_offset = (_off), \ + .mask = (_mask), \ + .type = { \ + .type_reg_offset = (_off), \ + .types_supported = IRQ_TYPE_EDGE_BOTH, \ + .type_reg_mask = (_mask), \ + .type_level_low_val = (_mask), \ + .type_level_high_val = (_mask), \ + .type_falling_val = 0, \ + .type_rising_val = 0, \ + }, \ + } + +static const struct mfd_cell wcd934x_devices[] = { + { + .name = "wcd934x-codec", + }, { + .name = "wcd934x-gpio", + .of_compatible = "qcom,wcd9340-gpio", + }, { + .name = "wcd934x-soundwire", + .of_compatible = "qcom,soundwire-v1.3.0", + }, +}; + +static const struct regmap_irq wcd934x_irqs[] = { + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_SLIMBUS, 0, BIT(0)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_HPH_PA_OCPL_FAULT, 0, BIT(2)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_HPH_PA_OCPR_FAULT, 0, BIT(3)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_MBHC_SW_DET, 1, BIT(0)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_MBHC_ELECT_INS_REM_DET, 1, BIT(1)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_MBHC_BUTTON_PRESS_DET, 1, BIT(2)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_MBHC_BUTTON_RELEASE_DET, 1, BIT(3)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_MBHC_ELECT_INS_REM_LEG_DET, 1, BIT(4)), + WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_SOUNDWIRE, 2, BIT(4)), +}; + +static const unsigned int wcd934x_config_regs[] = { + WCD934X_INTR_LEVEL0, +}; + +static const struct regmap_irq_chip wcd934x_regmap_irq_chip = { + .name = "wcd934x_irq", + .status_base = WCD934X_INTR_PIN1_STATUS0, + .mask_base = WCD934X_INTR_PIN1_MASK0, + .ack_base = WCD934X_INTR_PIN1_CLEAR0, + .num_regs = 4, + .irqs = wcd934x_irqs, + .num_irqs = ARRAY_SIZE(wcd934x_irqs), + .config_base = wcd934x_config_regs, + .num_config_bases = ARRAY_SIZE(wcd934x_config_regs), + .num_config_regs = 4, + .set_type_config = regmap_irq_set_type_config_simple, +}; + +static bool wcd934x_is_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case WCD934X_INTR_PIN1_STATUS0...WCD934X_INTR_PIN2_CLEAR3: + case WCD934X_SWR_AHB_BRIDGE_RD_DATA_0: + case WCD934X_SWR_AHB_BRIDGE_RD_DATA_1: + case WCD934X_SWR_AHB_BRIDGE_RD_DATA_2: + case WCD934X_SWR_AHB_BRIDGE_RD_DATA_3: + case WCD934X_SWR_AHB_BRIDGE_ACCESS_STATUS: + case WCD934X_ANA_MBHC_RESULT_3: + case WCD934X_ANA_MBHC_RESULT_2: + case WCD934X_ANA_MBHC_RESULT_1: + case WCD934X_ANA_MBHC_MECH: + case WCD934X_ANA_MBHC_ELECT: + case WCD934X_ANA_MBHC_ZDET: + case WCD934X_ANA_MICB2: + case WCD934X_ANA_RCO: + case WCD934X_ANA_BIAS: + return true; + default: + return false; + } +}; + +static const struct regmap_range_cfg wcd934x_ranges[] = { + { .name = "WCD934X", + .range_min = 0x0, + .range_max = WCD934X_MAX_REGISTER, + .selector_reg = WCD934X_SEL_REGISTER, + .selector_mask = WCD934X_SEL_MASK, + .selector_shift = WCD934X_SEL_SHIFT, + .window_start = WCD934X_WINDOW_START, + .window_len = WCD934X_WINDOW_LENGTH, + }, +}; + +static struct regmap_config wcd934x_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = 0xffff, + .can_multi_write = true, + .ranges = wcd934x_ranges, + .num_ranges = ARRAY_SIZE(wcd934x_ranges), + .volatile_reg = wcd934x_is_volatile_register, +}; + +static int wcd934x_bring_up(struct wcd934x_ddata *ddata) +{ + struct regmap *regmap = ddata->regmap; + u16 id_minor, id_major; + int ret; + + ret = regmap_bulk_read(regmap, WCD934X_CHIP_TIER_CTRL_CHIP_ID_BYTE0, + (u8 *)&id_minor, sizeof(u16)); + if (ret) + return ret; + + ret = regmap_bulk_read(regmap, WCD934X_CHIP_TIER_CTRL_CHIP_ID_BYTE2, + (u8 *)&id_major, sizeof(u16)); + if (ret) + return ret; + + dev_info(ddata->dev, "WCD934x chip id major 0x%x, minor 0x%x\n", + id_major, id_minor); + + regmap_write(regmap, WCD934X_CODEC_RPM_RST_CTL, 0x01); + regmap_write(regmap, WCD934X_SIDO_NEW_VOUT_A_STARTUP, 0x19); + regmap_write(regmap, WCD934X_SIDO_NEW_VOUT_D_STARTUP, 0x15); + /* Add 1msec delay for VOUT to settle */ + usleep_range(1000, 1100); + regmap_write(regmap, WCD934X_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x5); + regmap_write(regmap, WCD934X_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x7); + regmap_write(regmap, WCD934X_CODEC_RPM_RST_CTL, 0x3); + regmap_write(regmap, WCD934X_CODEC_RPM_RST_CTL, 0x7); + regmap_write(regmap, WCD934X_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x3); + + return 0; +} + +static int wcd934x_slim_status_up(struct slim_device *sdev) +{ + struct device *dev = &sdev->dev; + struct wcd934x_ddata *ddata; + int ret; + + ddata = dev_get_drvdata(dev); + + ddata->regmap = regmap_init_slimbus(sdev, &wcd934x_regmap_config); + if (IS_ERR(ddata->regmap)) { + dev_err(dev, "Error allocating slim regmap\n"); + return PTR_ERR(ddata->regmap); + } + + ret = wcd934x_bring_up(ddata); + if (ret) { + dev_err(dev, "Failed to bring up WCD934X: err = %d\n", ret); + return ret; + } + + ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq, + IRQF_TRIGGER_HIGH, 0, + &wcd934x_regmap_irq_chip, + &ddata->irq_data); + if (ret) { + dev_err(dev, "Failed to add IRQ chip: err = %d\n", ret); + return ret; + } + + ret = mfd_add_devices(dev, PLATFORM_DEVID_AUTO, wcd934x_devices, + ARRAY_SIZE(wcd934x_devices), NULL, 0, NULL); + if (ret) { + dev_err(dev, "Failed to add child devices: err = %d\n", + ret); + return ret; + } + + return ret; +} + +static int wcd934x_slim_status(struct slim_device *sdev, + enum slim_device_status status) +{ + switch (status) { + case SLIM_DEVICE_STATUS_UP: + return wcd934x_slim_status_up(sdev); + case SLIM_DEVICE_STATUS_DOWN: + mfd_remove_devices(&sdev->dev); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wcd934x_slim_probe(struct slim_device *sdev) +{ + struct device *dev = &sdev->dev; + struct device_node *np = dev->of_node; + struct wcd934x_ddata *ddata; + struct gpio_desc *reset_gpio; + int ret; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + ddata->irq = of_irq_get(np, 0); + if (ddata->irq < 0) + return dev_err_probe(ddata->dev, ddata->irq, + "Failed to get IRQ\n"); + + ddata->extclk = devm_clk_get(dev, "extclk"); + if (IS_ERR(ddata->extclk)) + return dev_err_probe(dev, PTR_ERR(ddata->extclk), + "Failed to get extclk"); + + ddata->supplies[0].supply = "vdd-buck"; + ddata->supplies[1].supply = "vdd-buck-sido"; + ddata->supplies[2].supply = "vdd-tx"; + ddata->supplies[3].supply = "vdd-rx"; + ddata->supplies[4].supply = "vdd-io"; + + ret = regulator_bulk_get(dev, WCD934X_MAX_SUPPLY, ddata->supplies); + if (ret) + return dev_err_probe(dev, ret, "Failed to get supplies\n"); + + ret = regulator_bulk_enable(WCD934X_MAX_SUPPLY, ddata->supplies); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable supplies\n"); + + /* + * For WCD934X, it takes about 600us for the Vout_A and + * Vout_D to be ready after BUCK_SIDO is powered up. + * SYS_RST_N shouldn't be pulled high during this time + */ + usleep_range(600, 650); + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) { + ret = dev_err_probe(dev, PTR_ERR(reset_gpio), + "Failed to get reset gpio\n"); + goto err_disable_regulators; + } + msleep(20); + gpiod_set_value(reset_gpio, 1); + msleep(20); + + ddata->dev = dev; + dev_set_drvdata(dev, ddata); + + return 0; + +err_disable_regulators: + regulator_bulk_disable(WCD934X_MAX_SUPPLY, ddata->supplies); + return ret; +} + +static void wcd934x_slim_remove(struct slim_device *sdev) +{ + struct wcd934x_ddata *ddata = dev_get_drvdata(&sdev->dev); + + regulator_bulk_disable(WCD934X_MAX_SUPPLY, ddata->supplies); + mfd_remove_devices(&sdev->dev); +} + +static const struct slim_device_id wcd934x_slim_id[] = { + { SLIM_MANF_ID_QCOM, SLIM_PROD_CODE_WCD9340, + SLIM_DEV_IDX_WCD9340, SLIM_DEV_INSTANCE_ID_WCD9340 }, + {} +}; + +static struct slim_driver wcd934x_slim_driver = { + .driver = { + .name = "wcd934x-slim", + }, + .probe = wcd934x_slim_probe, + .remove = wcd934x_slim_remove, + .device_status = wcd934x_slim_status, + .id_table = wcd934x_slim_id, +}; + +module_slim_driver(wcd934x_slim_driver); +MODULE_DESCRIPTION("WCD934X slim driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("slim:217:250:*"); +MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>"); |