Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 582 insertions, 0 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
new file mode 100644
index 0000000000..cadd4a820c
--- /dev/null
+++ b/drivers/misc/Kconfig
@@ -0,0 +1,582 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Misc strange devices
+#
+
+menu "Misc devices"
+
+config SENSORS_LIS3LV02D
+	tristate
+	depends on INPUT
+
+config AD525X_DPOT
+	tristate "Analog Devices Digital Potentiometers"
+	depends on (I2C || SPI) && SYSFS
+	help
+	  If you say yes here, you get support for the Analog Devices
+	  AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
+	  AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
+	  AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
+	  AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
+	  AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
+	  AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
+	  ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
+	  AD5271, AD5272, AD5274
+	  digital potentiometer chips.
+
+	  See Documentation/misc-devices/ad525x_dpot.rst for the
+	  userspace interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ad525x_dpot.
+
+config AD525X_DPOT_I2C
+	tristate "support I2C bus connection"
+	depends on AD525X_DPOT && I2C
+	help
+	  Say Y here if you have a digital potentiometers hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad525x_dpot-i2c.
+
+config AD525X_DPOT_SPI
+	tristate "support SPI bus connection"
+	depends on AD525X_DPOT && SPI_MASTER
+	help
+	  Say Y here if you have a digital potentiometers hooked to an SPI bus.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad525x_dpot-spi.
+
+config DUMMY_IRQ
+	tristate "Dummy IRQ handler"
+	help
+	  This module accepts a single 'irq' parameter, which it should register for.
+	  The sole purpose of this module is to help with debugging of systems on
+	  which spurious IRQs would happen on disabled IRQ vector.
+
+config IBM_ASM
+	tristate "Device driver for IBM RSA service processor"
+	depends on X86 && PCI && INPUT
+	depends on SERIAL_8250 || SERIAL_8250=n
+	help
+	  This option enables device driver support for in-band access to the
+	  IBM RSA (Condor) service processor in eServer xSeries systems.
+	  The ibmasm device driver allows user space application to access
+	  ASM (Advanced Systems Management) functions on the service
+	  processor. The driver is meant to be used in conjunction with
+	  a user space API.
+	  The ibmasm driver also enables the OS to use the UART on the
+	  service processor board as a regular serial port. To make use of
+	  this feature serial driver support (CONFIG_SERIAL_8250) must be
+	  enabled.
+
+	  WARNING: This software may not be supported or function
+	  correctly on your IBM server. Please consult the IBM ServerProven
+	  website <https://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
+	  for information on the specific driver level and support statement
+	  for your IBM server.
+
+config IBMVMC
+	tristate "IBM Virtual Management Channel support"
+	depends on PPC_PSERIES
+	help
+	  This is the IBM POWER Virtual Management Channel
+
+	  This driver is to be used for the POWER Virtual
+	  Management Channel virtual adapter on the PowerVM
+	  platform. It provides both request/response and
+	  async message support through the /dev/ibmvmc node.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmvmc.
+
+config PHANTOM
+	tristate "Sensable PHANToM (PCI)"
+	depends on PCI
+	help
+	  Say Y here if you want to build a driver for Sensable PHANToM device.
+
+	  This driver is only for PCI PHANToMs.
+
+	  If you choose to build module, its name will be phantom. If unsure,
+	  say N here.
+
+config TIFM_CORE
+	tristate "TI Flash Media interface support"
+	depends on PCI
+	help
+	  If you want support for Texas Instruments(R) Flash Media adapters
+	  you should select this option and then also choose an appropriate
+	  host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
+	  support', if you have a TI PCI74xx compatible card reader, for
+	  example.
+	  You will also have to select some flash card format drivers. MMC/SD
+	  cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
+	  Interface support (MMC_TIFM_SD)'.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called tifm_core.
+
+config TIFM_7XX1
+	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support"
+	depends on PCI && TIFM_CORE
+	default TIFM_CORE
+	help
+	  This option enables support for Texas Instruments(R) PCI74xx and
+	  PCI76xx families of Flash Media adapters, found in many laptops.
+	  To make actual use of the device, you will have to select some
+	  flash card format drivers, as outlined in the TIFM_CORE Help.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called tifm_7xx1.
+
+config ICS932S401
+	tristate "Integrated Circuits ICS932S401"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Integrated Circuits
+	  ICS932S401 clock control chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ics932s401.
+
+config ATMEL_SSC
+	tristate "Device driver for Atmel SSC peripheral"
+	depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST)
+	help
+	  This option enables device driver support for Atmel Synchronized
+	  Serial Communication peripheral (SSC).
+
+	  The SSC peripheral supports a wide variety of serial frame based
+	  communications, i.e. I2S, SPI, etc.
+
+	  If unsure, say N.
+
+config ENCLOSURE_SERVICES
+	tristate "Enclosure Services"
+	help
+	  Provides support for intelligent enclosures (bays which
+	  contain storage devices).  You also need either a host
+	  driver (SCSI/ATA) which supports enclosures
+	  or a SCSI enclosure device (SES) to use these services.
+
+config SGI_XP
+	tristate "Support communication between SGI SSIs"
+	depends on NET
+	depends on (IA64_SGI_UV || X86_UV) && SMP
+	depends on X86_64 || BROKEN
+	select SGI_GRU if X86_64 && SMP
+	help
+	  An SGI machine can be divided into multiple Single System
+	  Images which act independently of each other and have
+	  hardware based memory protection from the others.  Enabling
+	  this feature will allow for direct communication between SSIs
+	  based on a network adapter and DMA messaging.
+
+config SMPRO_ERRMON
+	tristate "Ampere Computing SMPro error monitor driver"
+	depends on MFD_SMPRO || COMPILE_TEST
+	help
+	  Say Y here to get support for the SMpro error monitor function
+	  provided by Ampere Computing's Altra and Altra Max SoCs. Upon
+	  loading, the driver creates sysfs files which can be use to gather
+	  multiple HW error data reported via read and write system calls.
+
+	  To compile this driver as a module, say M here. The driver will be
+	  called smpro-errmon.
+
+config SMPRO_MISC
+	tristate "Ampere Computing SMPro miscellaneous driver"
+	depends on MFD_SMPRO || COMPILE_TEST
+	help
+	  Say Y here to get support for the SMpro error miscellalenous function
+	  provided by Ampere Computing's Altra and Altra Max SoCs.
+
+	  To compile this driver as a module, say M here. The driver will be
+	  called smpro-misc.
+
+config CS5535_MFGPT
+	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
+	depends on MFD_CS5535
+	help
+	  This driver provides access to MFGPT functionality for other
+	  drivers that need timers.  MFGPTs are available in the CS5535 and
+	  CS5536 companion chips that are found in AMD Geode and several
+	  other platforms.  They have a better resolution and max interval
+	  than the generic PIT, and are suitable for use as high-res timers.
+	  You probably don't want to enable this manually; other drivers that
+	  make use of it should enable it.
+
+config CS5535_MFGPT_DEFAULT_IRQ
+	int
+	depends on CS5535_MFGPT
+	default 7
+	help
+	  MFGPTs on the CS5535 require an interrupt.  The selected IRQ
+	  can be overridden as a module option as well as by driver that
+	  use the cs5535_mfgpt_ API; however, different architectures might
+	  want to use a different IRQ by default.  This is here for
+	  architectures to set as necessary.
+
+config CS5535_CLOCK_EVENT_SRC
+	tristate "CS5535/CS5536 high-res timer (MFGPT) events"
+	depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
+	help
+	  This driver provides a clock event source based on the MFGPT
+	  timer(s) in the CS5535 and CS5536 companion chips.
+	  MFGPTs have a better resolution and max interval than the
+	  generic PIT, and are suitable for use as high-res timers.
+
+config GEHC_ACHC
+	tristate "GEHC ACHC support"
+	depends on SPI && SYSFS
+	depends on SOC_IMX53 || COMPILE_TEST
+	select FW_LOADER
+	help
+	  Support for GE ACHC microcontroller, that is part of the GE
+	  PPD device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gehc-achc.
+
+config HI6421V600_IRQ
+	tristate "HiSilicon Hi6421v600 IRQ and powerkey"
+	depends on OF
+	depends on SPMI
+	depends on HAS_IOMEM
+	select MFD_CORE
+	select REGMAP_SPMI
+	help
+	  This driver provides IRQ handling for Hi6421v600, used on
+	  some Kirin chipsets, like the one at Hikey 970.
+
+config HP_ILO
+	tristate "Channel interface driver for the HP iLO processor"
+	depends on PCI
+	help
+	  The channel interface driver allows applications to communicate
+	  with iLO management processors present on HP ProLiant servers.
+	  Upon loading, the driver creates /dev/hpilo/dXccbN files, which
+	  can be used to gather data from the management processor, via
+	  read and write system calls.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hpilo.
+
+config QCOM_COINCELL
+	tristate "Qualcomm coincell charger support"
+	depends on MFD_SPMI_PMIC || COMPILE_TEST
+	help
+	  This driver supports the coincell block found inside of
+	  Qualcomm PMICs.  The coincell charger provides a means to
+	  charge a coincell battery or backup capacitor which is used
+	  to maintain PMIC register and RTC state in the absence of
+	  external power.
+
+config QCOM_FASTRPC
+	tristate "Qualcomm FastRPC"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on RPMSG
+	select DMA_SHARED_BUFFER
+	select QCOM_SCM
+	help
+	  Provides a communication mechanism that allows for clients to
+	  make remote method invocations across processor boundary to
+	  applications DSP processor. Say M if you want to enable this
+	  module.
+
+config SGI_GRU
+	tristate "SGI GRU driver"
+	depends on X86_UV && SMP
+	select MMU_NOTIFIER
+	help
+	The GRU is a hardware resource located in the system chipset. The GRU
+	contains memory that can be mmapped into the user address space. This memory is
+	used to communicate with the GRU to perform functions such as load/store,
+	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
+	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+	user virtual addresses for operands.
+
+	If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+	bool  "SGI GRU driver debug"
+	depends on SGI_GRU
+	help
+	This option enables additional debugging code for the SGI GRU driver.
+	If you are unsure, say N.
+
+config APDS9802ALS
+	tristate "Medfield Avago APDS9802 ALS Sensor module"
+	depends on I2C
+	help
+	  If you say yes here you get support for the ALS APDS9802 ambient
+	  light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called apds9802als.
+
+config ISL29003
+	tristate "Intersil ISL29003 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Intersil ISL29003
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called isl29003.
+
+config ISL29020
+	tristate "Intersil ISL29020 ambient light sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Intersil ISL29020
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called isl29020.
+
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
+config SENSORS_BH1770
+	 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
+	 depends on I2C
+	help
+	   Say Y here if you want to build a driver for BH1770GLC (ROHM) or
+	   SFH7770 (Osram) combined ambient light and proximity sensor chip.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called bh1770glc. If unsure, say N here.
+
+config SENSORS_APDS990X
+	 tristate "APDS990X combined als and proximity sensors"
+	 depends on I2C
+	help
+	   Say Y here if you want to build a driver for Avago APDS990x
+	   combined ambient light and proximity sensor chip.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called apds990x. If unsure, say N here.
+
+config HMC6352
+	tristate "Honeywell HMC6352 compass"
+	depends on I2C
+	help
+	  This driver provides support for the Honeywell HMC6352 compass,
+	  providing configuration and heading data via sysfs.
+
+config DS1682
+	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+	depends on I2C
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS1682 Total Elapsed Time Recorder.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds1682.
+
+config VMWARE_BALLOON
+	tristate "VMware Balloon Driver"
+	depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
+	select MEMORY_BALLOON
+	help
+	  This is VMware physical memory management driver which acts
+	  like a "balloon" that can be inflated to reclaim physical pages
+	  by reserving them in the guest and invalidating them in the
+	  monitor, freeing up the underlying machine pages so they can
+	  be allocated to other guests. The balloon can also be deflated
+	  to allow the guest to use more physical memory.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vmw_balloon.
+
+config PCH_PHUB
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
+	select GENERIC_NET_UTILS
+	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
+	help
+	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
+	  Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
+	  processor. The Topcliff has MAC address and Option ROM data in SROM.
+	  This driver can access MAC address and Option ROM data in SROM.
+
+	  This driver also can be used for LAPIS Semiconductor's IOH,
+	  ML7213/ML7223/ML7831.
+	  ML7213 which is for IVI(In-Vehicle Infotainment) use.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pch_phub.
+
+config LATTICE_ECP3_CONFIG
+	tristate "Lattice ECP3 FPGA bitstream configuration via SPI"
+	depends on SPI && SYSFS
+	select FW_LOADER
+	default	n
+	help
+	  This option enables support for bitstream configuration (programming
+	  or loading) of the Lattice ECP3 FPGA family via SPI.
+
+	  If unsure, say N.
+
+config SRAM
+	bool "Generic on-chip SRAM driver"
+	depends on HAS_IOMEM
+	select GENERIC_ALLOCATOR
+	select SRAM_EXEC if ARM
+	help
+	  This driver allows you to declare a memory region to be managed by
+	  the genalloc API. It is supposed to be used for small on-chip SRAM
+	  areas found on many SoCs.
+
+config SRAM_EXEC
+	bool
+
+config DW_XDATA_PCIE
+	depends on PCI
+	tristate "Synopsys DesignWare xData PCIe driver"
+	help
+	  This driver allows controlling Synopsys DesignWare PCIe traffic
+	  generator IP also known as xData, present in Synopsys DesignWare
+	  PCIe Endpoint prototype.
+
+	  If unsure, say N.
+
+config PCI_ENDPOINT_TEST
+	depends on PCI
+	select CRC32
+	tristate "PCI Endpoint Test driver"
+	help
+	   Enable this configuration option to enable the host side test driver
+	   for PCI Endpoint.
+
+config XILINX_SDFEC
+	tristate "Xilinx SDFEC 16"
+	depends on HAS_IOMEM
+	help
+	  This option enables support for the Xilinx SDFEC (Soft Decision
+	  Forward Error Correction) driver. This enables a char driver
+	  for the SDFEC.
+
+	  You may select this driver if your design instantiates the
+	  SDFEC(16nm) hardened block. To compile this as a module choose M.
+
+	  If unsure, say N.
+
+config MISC_RTSX
+	tristate
+	default MISC_RTSX_PCI || MISC_RTSX_USB
+
+config HISI_HIKEY_USB
+	tristate "USB GPIO Hub on HiSilicon Hikey 960/970 Platform"
+	depends on (OF && GPIOLIB) || COMPILE_TEST
+	depends on USB_ROLE_SWITCH
+	help
+	  If you say yes here this adds support for the on-board USB GPIO hub
+	  found on HiKey 960/970 boards, which is necessary to support
+	  switching between the dual-role USB-C port and the USB-A host ports
+	  using only one USB controller.
+
+config OPEN_DICE
+	tristate "Open Profile for DICE driver"
+	depends on OF_RESERVED_MEM
+	depends on HAS_IOMEM
+	help
+	  This driver exposes a DICE reserved memory region to userspace via
+	  a character device. The memory region contains Compound Device
+	  Identifiers (CDIs) generated by firmware as an output of DICE
+	  measured boot flow. Userspace can use CDIs for remote attestation
+	  and sealing.
+
+	  If unsure, say N.
+
+config VCPU_STALL_DETECTOR
+	tristate "Guest vCPU stall detector"
+	depends on OF && HAS_IOMEM
+	help
+	  When this driver is bound inside a KVM guest, it will
+	  periodically "pet" an MMIO stall detector device from each vCPU
+	  and allow the host to detect vCPU stalls.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called vcpu_stall_detector.
+
+	  If you do not intend to run this kernel as a guest, say N.
+
+config TMR_MANAGER
+	tristate "Select TMR Manager"
+	depends on MICROBLAZE && MB_MANAGER
+	help
+	  This option enables the driver developed for TMR Manager.
+	  The Triple Modular Redundancy(TMR) manager provides support for
+	  fault detection.
+
+	  Say N here unless you know what you are doing.
+
+config TMR_INJECT
+	tristate "Select TMR Inject"
+	depends on TMR_MANAGER && FAULT_INJECTION_DEBUG_FS
+	help
+	  This option enables the driver developed for TMR Inject.
+	  The Triple Modular Redundancy(TMR) Inject provides
+	  fault injection.
+
+	  Say N here unless you know what you are doing.
+
+config TPS6594_ESM
+	tristate "TI TPS6594 Error Signal Monitor support"
+	depends on MFD_TPS6594
+	default MFD_TPS6594
+	help
+	  Support ESM (Error Signal Monitor) on TPS6594 PMIC devices.
+	  ESM is used typically to reboot the board in error condition.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps6594-esm.
+
+config TPS6594_PFSM
+	tristate "TI TPS6594 Pre-configurable Finite State Machine support"
+	depends on MFD_TPS6594
+	default MFD_TPS6594
+	help
+	  Support PFSM (Pre-configurable Finite State Machine) on TPS6594 PMIC devices.
+	  These devices integrate a finite state machine engine, which manages the state
+	  of the device during operating state transition.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps6594-pfsm.
+
+source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
+source "drivers/misc/ti-st/Kconfig"
+source "drivers/misc/lis3lv02d/Kconfig"
+source "drivers/misc/altera-stapl/Kconfig"
+source "drivers/misc/mei/Kconfig"
+source "drivers/misc/vmw_vmci/Kconfig"
+source "drivers/misc/genwqe/Kconfig"
+source "drivers/misc/echo/Kconfig"
+source "drivers/misc/cxl/Kconfig"
+source "drivers/misc/ocxl/Kconfig"
+source "drivers/misc/bcm-vk/Kconfig"
+source "drivers/misc/cardreader/Kconfig"
+source "drivers/misc/uacce/Kconfig"
+source "drivers/misc/pvpanic/Kconfig"
+source "drivers/misc/mchp_pci1xxxx/Kconfig"
+endmenu