Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 45 insertions, 21 deletions

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index f61a80597a..4bd4f32bcd 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/nvmem-provider.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
@@ -242,7 +243,7 @@ static const struct i2c_device_id at24_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, at24_ids);
 
-static const struct of_device_id at24_of_match[] = {
+static const struct of_device_id __maybe_unused at24_of_match[] = {
 	{ .compatible = "atmel,24c00",		.data = &at24_data_24c00 },
 	{ .compatible = "atmel,24c01",		.data = &at24_data_24c01 },
 	{ .compatible = "atmel,24cs01",		.data = &at24_data_24cs01 },
@@ -439,12 +440,9 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
 	if (off + count > at24->byte_len)
 		return -EINVAL;
 
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
 		return ret;
-	}
-
 	/*
 	 * Read data from chip, protecting against concurrent updates
 	 * from this host, but not from other I2C masters.
@@ -486,12 +484,9 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 	if (off + count > at24->byte_len)
 		return -EINVAL;
 
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
 		return ret;
-	}
-
 	/*
 	 * Write data to chip, protecting against concurrent updates
 	 * from this host, but not from other I2C masters.
@@ -563,6 +558,31 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
 	}
 }
 
+static void at24_probe_temp_sensor(struct i2c_client *client)
+{
+	struct at24_data *at24 = i2c_get_clientdata(client);
+	struct i2c_board_info info = { .type = "jc42" };
+	int ret;
+	u8 val;
+
+	/*
+	 * Byte 2 has value 11 for DDR3, earlier versions don't
+	 * support the thermal sensor present flag
+	 */
+	ret = at24_read(at24, 2, &val, 1);
+	if (ret || val != 11)
+		return;
+
+	/* Byte 32, bit 7 is set if temp sensor is present */
+	ret = at24_read(at24, 32, &val, 1);
+	if (ret || !(val & BIT(7)))
+		return;
+
+	info.addr = 0x18 | (client->addr & 7);
+
+	i2c_new_client_device(client->adapter, &info);
+}
+
 static int at24_probe(struct i2c_client *client)
 {
 	struct regmap_config regmap_config = { };
@@ -738,15 +758,6 @@ static int at24_probe(struct i2c_client *client)
 	}
 	pm_runtime_enable(dev);
 
-	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
-	if (IS_ERR(at24->nvmem)) {
-		pm_runtime_disable(dev);
-		if (!pm_runtime_status_suspended(dev))
-			regulator_disable(at24->vcc_reg);
-		return dev_err_probe(dev, PTR_ERR(at24->nvmem),
-				     "failed to register nvmem\n");
-	}
-
 	/*
 	 * Perform a one-byte test read to verify that the chip is functional,
 	 * unless powering on the device is to be avoided during probe (i.e.
@@ -762,6 +773,19 @@ static int at24_probe(struct i2c_client *client)
 		}
 	}
 
+	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
+	if (IS_ERR(at24->nvmem)) {
+		pm_runtime_disable(dev);
+		if (!pm_runtime_status_suspended(dev))
+			regulator_disable(at24->vcc_reg);
+		return dev_err_probe(dev, PTR_ERR(at24->nvmem),
+				     "failed to register nvmem\n");
+	}
+
+	/* If this a SPD EEPROM, probe for DDR3 thermal sensor */
+	if (cdata == &at24_data_spd)
+		at24_probe_temp_sensor(client);
+
 	pm_runtime_idle(dev);
 
 	if (writable)
@@ -812,7 +836,7 @@ static struct i2c_driver at24_driver = {
 	.driver = {
 		.name = "at24",
 		.pm = &at24_pm_ops,
-		.of_match_table = at24_of_match,
+		.of_match_table = of_match_ptr(at24_of_match),
 		.acpi_match_table = ACPI_PTR(at24_acpi_ids),
 	},
 	.probe = at24_probe,