Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 524 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
new file mode 100644
index 0000000000..d12532b96b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-st.c
@@ -0,0 +1,524 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for SDHCI on STMicroelectronics SoCs
+ *
+ * Copyright (C) 2014 STMicroelectronics Ltd
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ * Contributors: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Based on sdhci-cns3xxx.c
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/mmc/host.h>
+#include <linux/reset.h>
+#include "sdhci-pltfm.h"
+
+struct st_mmc_platform_data {
+	struct  reset_control *rstc;
+	struct  clk *icnclk;
+	void __iomem *top_ioaddr;
+};
+
+/* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */
+
+#define ST_MMC_CCONFIG_REG_1		0x400
+#define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT	BIT(24)
+#define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ	BIT(12)
+#define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT	BIT(8)
+#define ST_MMC_CCONFIG_ASYNC_WAKEUP	BIT(0)
+#define ST_MMC_CCONFIG_1_DEFAULT	\
+				((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \
+				 (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \
+				 (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT))
+
+#define ST_MMC_CCONFIG_REG_2		0x404
+#define ST_MMC_CCONFIG_HIGH_SPEED	BIT(28)
+#define ST_MMC_CCONFIG_ADMA2		BIT(24)
+#define ST_MMC_CCONFIG_8BIT		BIT(20)
+#define ST_MMC_CCONFIG_MAX_BLK_LEN	16
+#define  MAX_BLK_LEN_1024		1
+#define  MAX_BLK_LEN_2048		2
+#define BASE_CLK_FREQ_200		0xc8
+#define BASE_CLK_FREQ_100		0x64
+#define BASE_CLK_FREQ_50		0x32
+#define ST_MMC_CCONFIG_2_DEFAULT \
+	(ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \
+	 ST_MMC_CCONFIG_8BIT | \
+	 (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN))
+
+#define ST_MMC_CCONFIG_REG_3			0x408
+#define ST_MMC_CCONFIG_EMMC_SLOT_TYPE		BIT(28)
+#define ST_MMC_CCONFIG_64BIT			BIT(24)
+#define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT	BIT(20)
+#define ST_MMC_CCONFIG_1P8_VOLT			BIT(16)
+#define ST_MMC_CCONFIG_3P0_VOLT			BIT(12)
+#define ST_MMC_CCONFIG_3P3_VOLT			BIT(8)
+#define ST_MMC_CCONFIG_SUSP_RES_SUPPORT		BIT(4)
+#define ST_MMC_CCONFIG_SDMA			BIT(0)
+#define ST_MMC_CCONFIG_3_DEFAULT	\
+			 (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT	| \
+			  ST_MMC_CCONFIG_3P3_VOLT		| \
+			  ST_MMC_CCONFIG_SUSP_RES_SUPPORT	| \
+			  ST_MMC_CCONFIG_SDMA)
+
+#define ST_MMC_CCONFIG_REG_4	0x40c
+#define ST_MMC_CCONFIG_D_DRIVER	BIT(20)
+#define ST_MMC_CCONFIG_C_DRIVER	BIT(16)
+#define ST_MMC_CCONFIG_A_DRIVER	BIT(12)
+#define ST_MMC_CCONFIG_DDR50	BIT(8)
+#define ST_MMC_CCONFIG_SDR104	BIT(4)
+#define ST_MMC_CCONFIG_SDR50	BIT(0)
+#define ST_MMC_CCONFIG_4_DEFAULT	0
+
+#define ST_MMC_CCONFIG_REG_5		0x410
+#define ST_MMC_CCONFIG_TUNING_FOR_SDR50	BIT(8)
+#define RETUNING_TIMER_CNT_MAX		0xf
+#define ST_MMC_CCONFIG_5_DEFAULT	0
+
+/* I/O configuration for Arasan IP */
+#define ST_MMC_GP_OUTPUT	0x450
+#define ST_MMC_GP_OUTPUT_CD	BIT(12)
+
+#define ST_MMC_STATUS_R		0x460
+
+#define ST_TOP_MMC_DLY_FIX_OFF(x)	(x - 0x8)
+
+/* TOP config registers to manage static and dynamic delay */
+#define ST_TOP_MMC_TX_CLK_DLY			ST_TOP_MMC_DLY_FIX_OFF(0x8)
+#define ST_TOP_MMC_RX_CLK_DLY			ST_TOP_MMC_DLY_FIX_OFF(0xc)
+/* MMC delay control register */
+#define ST_TOP_MMC_DLY_CTRL			ST_TOP_MMC_DLY_FIX_OFF(0x18)
+#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD	BIT(0)
+#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL	BIT(1)
+#define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE	BIT(8)
+#define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE	BIT(9)
+#define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY	BIT(10)
+#define ST_TOP_MMC_START_DLL_LOCK		BIT(11)
+
+/* register to provide the phase-shift value for DLL */
+#define ST_TOP_MMC_TX_DLL_STEP_DLY		ST_TOP_MMC_DLY_FIX_OFF(0x1c)
+#define ST_TOP_MMC_RX_DLL_STEP_DLY		ST_TOP_MMC_DLY_FIX_OFF(0x20)
+#define ST_TOP_MMC_RX_CMD_STEP_DLY		ST_TOP_MMC_DLY_FIX_OFF(0x24)
+
+/* phase shift delay on the tx clk 2.188ns */
+#define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID	0x6
+
+#define ST_TOP_MMC_DLY_MAX			0xf
+
+#define ST_TOP_MMC_DYN_DLY_CONF	\
+		(ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \
+		 ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \
+		 ST_TOP_MMC_START_DLL_LOCK)
+
+/*
+ * For clock speeds greater than 90MHz, we need to check that the
+ * DLL procedure has finished before switching to ultra-speed modes.
+ */
+#define	CLK_TO_CHECK_DLL_LOCK	90000000
+
+static inline void st_mmcss_set_static_delay(void __iomem *ioaddr)
+{
+	if (!ioaddr)
+		return;
+
+	writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL);
+	writel_relaxed(ST_TOP_MMC_DLY_MAX,
+			ioaddr + ST_TOP_MMC_TX_CLK_DLY);
+}
+
+/**
+ * st_mmcss_cconfig: configure the Arasan HC inside the flashSS.
+ * @np: dt device node.
+ * @host: sdhci host
+ * Description: this function is to configure the Arasan host controller.
+ * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated
+ * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5
+ * or eMMC4.3.  This has to be done before registering the sdhci host.
+ */
+static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct mmc_host *mhost = host->mmc;
+	u32 cconf2, cconf3, cconf4, cconf5;
+
+	if (!of_device_is_compatible(np, "st,sdhci-stih407"))
+		return;
+
+	cconf2 = ST_MMC_CCONFIG_2_DEFAULT;
+	cconf3 = ST_MMC_CCONFIG_3_DEFAULT;
+	cconf4 = ST_MMC_CCONFIG_4_DEFAULT;
+	cconf5 = ST_MMC_CCONFIG_5_DEFAULT;
+
+	writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT,
+			host->ioaddr + ST_MMC_CCONFIG_REG_1);
+
+	/* Set clock frequency, default to 50MHz if max-frequency is not
+	 * provided */
+
+	switch (mhost->f_max) {
+	case 200000000:
+		clk_set_rate(pltfm_host->clk, mhost->f_max);
+		cconf2 |= BASE_CLK_FREQ_200;
+		break;
+	case 100000000:
+		clk_set_rate(pltfm_host->clk, mhost->f_max);
+		cconf2 |= BASE_CLK_FREQ_100;
+		break;
+	default:
+		clk_set_rate(pltfm_host->clk, 50000000);
+		cconf2 |= BASE_CLK_FREQ_50;
+	}
+
+	writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2);
+
+	if (!mmc_card_is_removable(mhost))
+		cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE;
+	else
+		/* CARD _D ET_CTRL */
+		writel_relaxed(ST_MMC_GP_OUTPUT_CD,
+				host->ioaddr + ST_MMC_GP_OUTPUT);
+
+	if (mhost->caps & MMC_CAP_UHS_SDR50) {
+		/* use 1.8V */
+		cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
+		cconf4 |= ST_MMC_CCONFIG_SDR50;
+		/* Use tuning */
+		cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50;
+		/* Max timeout for retuning */
+		cconf5 |= RETUNING_TIMER_CNT_MAX;
+	}
+
+	if (mhost->caps & MMC_CAP_UHS_SDR104) {
+		/*
+		 * SDR104 implies the HC can support HS200 mode, so
+		 * it's mandatory to use 1.8V
+		 */
+		cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
+		cconf4 |= ST_MMC_CCONFIG_SDR104;
+		/* Max timeout for retuning */
+		cconf5 |= RETUNING_TIMER_CNT_MAX;
+	}
+
+	if (mhost->caps & MMC_CAP_UHS_DDR50)
+		cconf4 |= ST_MMC_CCONFIG_DDR50;
+
+	writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3);
+	writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4);
+	writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5);
+}
+
+static inline void st_mmcss_set_dll(void __iomem *ioaddr)
+{
+	if (!ioaddr)
+		return;
+
+	writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF,	ioaddr + ST_TOP_MMC_DLY_CTRL);
+	writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID,
+			ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY);
+}
+
+static int st_mmcss_lock_dll(void __iomem *ioaddr)
+{
+	unsigned long curr, value;
+	unsigned long finish = jiffies + HZ;
+
+	/* Checks if the DLL procedure is finished */
+	do {
+		curr = jiffies;
+		value = readl(ioaddr + ST_MMC_STATUS_R);
+		if (value & 0x1)
+			return 0;
+
+		cpu_relax();
+	} while (!time_after_eq(curr, finish));
+
+	return -EBUSY;
+}
+
+static int sdhci_st_set_dll_for_clock(struct sdhci_host *host)
+{
+	int ret = 0;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
+
+	if (host->clock > CLK_TO_CHECK_DLL_LOCK) {
+		st_mmcss_set_dll(pdata->top_ioaddr);
+		ret = st_mmcss_lock_dll(host->ioaddr);
+	}
+
+	return ret;
+}
+
+static void sdhci_st_set_uhs_signaling(struct sdhci_host *host,
+					unsigned int uhs)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
+	u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	int ret = 0;
+
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	switch (uhs) {
+	/*
+	 * Set V18_EN -- UHS modes do not work without this.
+	 * does not change signaling voltage
+	 */
+
+	case MMC_TIMING_UHS_SDR12:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_UHS_SDR25:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
+		ret = sdhci_st_set_dll_for_clock(host);
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
+		ret =  sdhci_st_set_dll_for_clock(host);
+		break;
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
+		break;
+	}
+
+	if (ret)
+		dev_warn(mmc_dev(host->mmc), "Error setting dll for clock "
+						"(uhs %d)\n", uhs);
+
+	dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2);
+
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static u32 sdhci_st_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+
+	switch (reg) {
+	case SDHCI_CAPABILITIES:
+		ret = readl_relaxed(host->ioaddr + reg);
+		/* Support 3.3V and 1.8V */
+		ret &= ~SDHCI_CAN_VDD_300;
+		break;
+	default:
+		ret = readl_relaxed(host->ioaddr + reg);
+	}
+	return ret;
+}
+
+static const struct sdhci_ops sdhci_st_ops = {
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.read_l = sdhci_st_readl,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_st_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_st_pdata = {
+	.ops = &sdhci_st_ops,
+	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+		SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		SDHCI_QUIRK_NO_HISPD_BIT,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+
+static int sdhci_st_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host;
+	struct st_mmc_platform_data *pdata;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct clk *clk, *icnclk;
+	int ret = 0;
+	u16 host_version;
+	struct reset_control *rstc;
+
+	clk =  devm_clk_get(&pdev->dev, "mmc");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Peripheral clk not found\n");
+		return PTR_ERR(clk);
+	}
+
+	/* ICN clock isn't compulsory, but use it if it's provided. */
+	icnclk = devm_clk_get(&pdev->dev, "icn");
+	if (IS_ERR(icnclk))
+		icnclk = NULL;
+
+	rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rstc))
+		return PTR_ERR(rstc);
+	reset_control_deassert(rstc);
+
+	host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, sizeof(*pdata));
+	if (IS_ERR(host)) {
+		dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n");
+		ret = PTR_ERR(host);
+		goto err_pltfm_init;
+	}
+
+	pltfm_host = sdhci_priv(host);
+	pdata = sdhci_pltfm_priv(pltfm_host);
+	pdata->rstc = rstc;
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed mmc_of_parse\n");
+		goto err_of;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to prepare clock\n");
+		goto err_of;
+	}
+
+	ret = clk_prepare_enable(icnclk);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to prepare icn clock\n");
+		goto err_icnclk;
+	}
+
+	/* Configure the FlashSS Top registers for setting eMMC TX/RX delay */
+	pdata->top_ioaddr = devm_platform_ioremap_resource_byname(pdev, "top-mmc-delay");
+	if (IS_ERR(pdata->top_ioaddr))
+		pdata->top_ioaddr = NULL;
+
+	pltfm_host->clk = clk;
+	pdata->icnclk = icnclk;
+
+	/* Configure the Arasan HC inside the flashSS */
+	st_mmcss_cconfig(np, host);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_out;
+
+	host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
+
+	dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n",
+		((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT),
+		((host_version & SDHCI_VENDOR_VER_MASK) >>
+		SDHCI_VENDOR_VER_SHIFT));
+
+	return 0;
+
+err_out:
+	clk_disable_unprepare(icnclk);
+err_icnclk:
+	clk_disable_unprepare(clk);
+err_of:
+	sdhci_pltfm_free(pdev);
+err_pltfm_init:
+	reset_control_assert(rstc);
+
+	return ret;
+}
+
+static void sdhci_st_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
+	struct reset_control *rstc = pdata->rstc;
+	struct clk *clk = pltfm_host->clk;
+
+	sdhci_pltfm_remove(pdev);
+
+	clk_disable_unprepare(pdata->icnclk);
+	clk_disable_unprepare(clk);
+
+	reset_control_assert(rstc);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_st_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+
+	ret = sdhci_suspend_host(host);
+	if (ret)
+		goto out;
+
+	reset_control_assert(pdata->rstc);
+
+	clk_disable_unprepare(pdata->icnclk);
+	clk_disable_unprepare(pltfm_host->clk);
+out:
+	return ret;
+}
+
+static int sdhci_st_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	ret = clk_prepare_enable(pltfm_host->clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(pdata->icnclk);
+	if (ret) {
+		clk_disable_unprepare(pltfm_host->clk);
+		return ret;
+	}
+
+	reset_control_deassert(pdata->rstc);
+
+	st_mmcss_cconfig(np, host);
+
+	return sdhci_resume_host(host);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume);
+
+static const struct of_device_id st_sdhci_match[] = {
+	{ .compatible = "st,sdhci" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, st_sdhci_match);
+
+static struct platform_driver sdhci_st_driver = {
+	.probe = sdhci_st_probe,
+	.remove_new = sdhci_st_remove,
+	.driver = {
+		   .name = "sdhci-st",
+		   .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		   .pm = &sdhci_st_pmops,
+		   .of_match_table = st_sdhci_match,
+		  },
+};
+
+module_platform_driver(sdhci_st_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sdhci-st");