summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/mtd/nand/raw/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mtd/nand/raw/Kconfig')
-rw-r--r--drivers/mtd/nand/raw/Kconfig546
1 files changed, 546 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
new file mode 100644
index 0000000000..cbf8ae85e1
--- /dev/null
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -0,0 +1,546 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig MTD_RAW_NAND
+ tristate "Raw/Parallel NAND Device Support"
+ select MTD_NAND_CORE
+ select MTD_NAND_ECC
+ help
+ This enables support for accessing all type of raw/parallel
+ NAND flash devices. For further information see
+ <http://www.linux-mtd.infradead.org/doc/nand.html>.
+
+if MTD_RAW_NAND
+
+comment "Raw/parallel NAND flash controllers"
+
+config MTD_NAND_DENALI
+ tristate
+
+config MTD_NAND_DENALI_PCI
+ tristate "Denali NAND controller on Intel Moorestown"
+ select MTD_NAND_DENALI
+ depends on PCI
+ help
+ Enable the driver for NAND flash on Intel Moorestown, using the
+ Denali NAND controller core.
+
+config MTD_NAND_DENALI_DT
+ tristate "Denali NAND controller as a DT device"
+ select MTD_NAND_DENALI
+ depends on HAS_DMA && HAVE_CLK && OF && HAS_IOMEM
+ help
+ Enable the driver for NAND flash on platforms using a Denali NAND
+ controller as a DT device.
+
+config MTD_NAND_AMS_DELTA
+ tristate "Amstrad E3 NAND controller"
+ depends on MACH_AMS_DELTA || COMPILE_TEST
+ default y
+ help
+ Support for NAND flash on Amstrad E3 (Delta).
+
+config MTD_NAND_OMAP2
+ tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller"
+ depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on OMAP_GPMC
+ help
+ Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
+ and Keystone platforms.
+
+config MTD_NAND_OMAP_BCH
+ depends on MTD_NAND_OMAP2
+ bool "Support hardware based BCH error correction"
+ default n
+ select BCH
+ help
+ This config enables the ELM hardware engine, which can be used to
+ locate and correct errors when using BCH ECC scheme. This offloads
+ the cpu from doing ECC error searching and correction. However some
+ legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine
+ so this is optional for them.
+
+config MTD_NAND_OMAP_BCH_BUILD
+ def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH
+
+config MTD_NAND_AU1550
+ tristate "Au1550/1200 NAND support"
+ depends on MIPS_ALCHEMY
+ help
+ This enables the driver for the NAND flash controller on the
+ AMD/Alchemy 1550 SOC.
+
+config MTD_NAND_NDFC
+ tristate "IBM/MCC 4xx NAND controller"
+ depends on 4xx
+ select MTD_NAND_ECC_SW_HAMMING
+ select MTD_NAND_ECC_SW_HAMMING_SMC
+ help
+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+
+config MTD_NAND_S3C2410
+ tristate "Samsung S3C NAND controller"
+ depends on ARCH_S3C64XX
+ help
+ This enables the NAND flash controller on the S3C24xx and S3C64xx
+ SoCs
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_S3C2410_DEBUG
+ bool "Samsung S3C NAND controller debug"
+ depends on MTD_NAND_S3C2410
+ help
+ Enable debugging of the S3C NAND driver
+
+config MTD_NAND_S3C2410_CLKSTOP
+ bool "Samsung S3C NAND IDLE clock stop"
+ depends on MTD_NAND_S3C2410
+ default n
+ help
+ Stop the clock to the NAND controller when there is no chip
+ selected to save power. This will mean there is a small delay
+ when the is NAND chip selected or released, but will save
+ approximately 5mA of power when there is nothing happening.
+
+config MTD_NAND_SHARPSL
+ tristate "Sharp SL Series (C7xx + others) NAND controller"
+ depends on ARCH_PXA || COMPILE_TEST
+ depends on HAS_IOMEM
+
+config MTD_NAND_CAFE
+ tristate "OLPC CAFÉ NAND controller"
+ depends on PCI
+ select REED_SOLOMON
+ select REED_SOLOMON_DEC16
+ help
+ Use NAND flash attached to the CAFÉ chip designed for the OLPC
+ laptop.
+
+config MTD_NAND_CS553X
+ tristate "CS5535/CS5536 (AMD Geode companion) NAND controller"
+ depends on X86_32
+ depends on !UML && HAS_IOMEM
+ help
+ The CS553x companion chips for the AMD Geode processor
+ include NAND flash controllers with built-in hardware ECC
+ capabilities; enabling this option will allow you to use
+ these. The driver will check the MSRs to verify that the
+ controller is enabled for NAND, and currently requires that
+ the controller be in MMIO mode.
+
+ If you say "m", the module will be called cs553x_nand.
+
+config MTD_NAND_ATMEL
+ tristate "Atmel AT91 NAND Flash/SmartMedia NAND controller"
+ depends on ARCH_AT91 || COMPILE_TEST
+ depends on HAS_IOMEM
+ select GENERIC_ALLOCATOR
+ select MFD_ATMEL_SMC
+ help
+ Enables support for NAND Flash / Smart Media Card interface
+ on Atmel AT91 processors.
+
+config MTD_NAND_ORION
+ tristate "Marvell Orion NAND controller"
+ depends on PLAT_ORION
+ help
+ This enables the NAND flash controller on Orion machines.
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_MARVELL
+ tristate "Marvell EBU NAND controller"
+ depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
+ COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This enables the NAND flash controller driver for Marvell boards,
+ including:
+ - PXA3xx processors (NFCv1)
+ - 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2)
+ - 64-bit Aramda platforms (7k, 8k, ac5) (NFCv2)
+
+config MTD_NAND_SLC_LPC32XX
+ tristate "NXP LPC32xx SLC NAND controller"
+ depends on ARCH_LPC32XX || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
+ chips) NAND controller. This is the default for the PHYTEC 3250
+ reference board which contains a NAND256R3A2CZA6 chip.
+
+ Please check the actual NAND chip connected and its support
+ by the SLC NAND controller.
+
+config MTD_NAND_MLC_LPC32XX
+ tristate "NXP LPC32xx MLC NAND controller"
+ depends on ARCH_LPC32XX || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND
+ controller. This is the default for the WORK92105 controller
+ board.
+
+ Please check the actual NAND chip connected and its support
+ by the MLC NAND controller.
+
+config MTD_NAND_PASEMI
+ tristate "PA Semi PWRficient NAND controller"
+ depends on PPC_PASEMI
+ help
+ Enables support for NAND Flash interface on PA Semi PWRficient
+ based boards
+
+source "drivers/mtd/nand/raw/brcmnand/Kconfig"
+
+config MTD_NAND_BCM47XXNFLASH
+ tristate "BCM4706 BCMA NAND controller"
+ depends on BCMA_NFLASH
+ depends on BCMA
+ help
+ BCMA bus can have various flash memories attached, they are
+ registered by bcma as platform devices. This enables driver for
+ NAND flash memories. For now only BCM4706 is supported.
+
+config MTD_NAND_MPC5121_NFC
+ tristate "MPC5121 NAND controller"
+ depends on PPC_MPC512x
+ help
+ This enables the driver for the NAND flash controller on the
+ MPC5121 SoC.
+
+config MTD_NAND_GPMI_NAND
+ tristate "Freescale GPMI NAND controller"
+ depends on MXS_DMA
+ help
+ Enables NAND Flash support for IMX23, IMX28 or IMX6.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time.
+
+config MTD_NAND_FSL_ELBC
+ tristate "Freescale eLBC NAND controller"
+ depends on FSL_SOC
+ select FSL_LBC
+ help
+ Various Freescale chips, including the 8313, include a NAND Flash
+ Controller Module with built-in hardware ECC capabilities.
+ Enabling this option will enable you to use this to control
+ external NAND devices.
+
+config MTD_NAND_FSL_IFC
+ tristate "Freescale IFC NAND controller"
+ depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
+ depends on HAS_IOMEM
+ select FSL_IFC
+ select MEMORY
+ help
+ Various Freescale chips e.g P1010, include a NAND Flash machine
+ with built-in hardware ECC capabilities.
+ Enabling this option will enable you to use this to control
+ external NAND devices.
+
+config MTD_NAND_FSL_UPM
+ tristate "Freescale UPM NAND controller"
+ depends on PPC_83xx || PPC_85xx
+ select FSL_LBC
+ help
+ Enables support for NAND Flash chips wired onto Freescale PowerPC
+ processor localbus with User-Programmable Machine support.
+
+config MTD_NAND_VF610_NFC
+ tristate "Freescale VF610/MPC5125 NAND controller"
+ depends on (SOC_VF610 || COMPILE_TEST)
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash Controller on some Freescale
+ processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
+ The driver supports a maximum 2k page size. With 2k pages and
+ 64 bytes or more of OOB, hardware ECC with up to 32-bit error
+ correction is supported. Hardware ECC is only enabled through
+ device tree.
+
+config MTD_NAND_MXC
+ tristate "Freescale MXC NAND controller"
+ depends on ARCH_MXC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ help
+ This enables the driver for the NAND flash controller on the
+ MXC processors.
+
+config MTD_NAND_SH_FLCTL
+ tristate "Renesas SuperH FLCTL NAND controller"
+ depends on SUPERH || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Several Renesas SuperH CPU has FLCTL. This option enables support
+ for NAND Flash using FLCTL.
+
+config MTD_NAND_DAVINCI
+ tristate "DaVinci/Keystone NAND controller"
+ depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enable the driver for NAND flash chips on Texas Instruments
+ DaVinci/Keystone processors.
+
+config MTD_NAND_TXX9NDFMC
+ tristate "TXx9 NAND controller"
+ depends on SOC_TX4938 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This enables the NAND flash controller on the TXx9 SoCs.
+
+config MTD_NAND_SOCRATES
+ tristate "Socrates NAND controller"
+ depends on SOCRATES
+ help
+ Enables support for NAND Flash chips wired onto Socrates board.
+
+source "drivers/mtd/nand/raw/ingenic/Kconfig"
+
+config MTD_NAND_FSMC
+ tristate "ST Micros FSMC NAND controller"
+ depends on OF && HAS_IOMEM
+ depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST
+ help
+ Enables support for NAND Flash chips on the ST Microelectronics
+ Flexible Static Memory Controller (FSMC)
+
+config MTD_NAND_XWAY
+ bool "Lantiq XWAY NAND controller"
+ depends on LANTIQ && SOC_TYPE_XWAY
+ help
+ Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ to the External Bus Unit (EBU).
+
+config MTD_NAND_SUNXI
+ tristate "Allwinner NAND controller"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash chips on Allwinner SoCs.
+
+config MTD_NAND_HISI504
+ tristate "Hisilicon Hip04 NAND controller"
+ depends on ARCH_HISI || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND controller on Hisilicon SoC Hip04.
+
+config MTD_NAND_QCOM
+ tristate "QCOM NAND controller"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND flash chips on SoCs containing the EBI2 NAND
+ controller. This controller is found on IPQ806x SoC.
+
+config MTD_NAND_MTK
+ tristate "MTK NAND controller"
+ depends on MTD_NAND_ECC_MEDIATEK
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND controller on MTK SoCs.
+ This controller is found on mt27xx, mt81xx, mt65xx SoCs.
+
+config MTD_NAND_MXIC
+ tristate "Macronix raw NAND controller"
+ depends on HAS_IOMEM || COMPILE_TEST
+ help
+ This selects the Macronix raw NAND controller driver.
+
+config MTD_NAND_TEGRA
+ tristate "NVIDIA Tegra NAND controller"
+ depends on ARCH_TEGRA || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND flash controller on NVIDIA Tegra SoC.
+ The driver has been developed and tested on a Tegra 2 SoC. DMA
+ support, raw read/write page as well as HW ECC read/write page
+ is supported. Extra OOB bytes when using HW ECC are currently
+ not supported.
+
+config MTD_NAND_STM32_FMC2
+ tristate "Support for NAND controller on STM32MP SoCs"
+ depends on ARCH_STM32 || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ Enables support for NAND Flash chips on SoCs containing the FMC2
+ NAND controller. This controller is found on STM32MP SoCs.
+ The controller supports a maximum 8k page size and supports
+ a maximum 8-bit correction error per sector of 512 bytes.
+
+config MTD_NAND_MESON
+ tristate "Support for NAND controller on Amlogic's Meson SoCs"
+ depends on COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
+ select MFD_SYSCON
+ help
+ Enables support for NAND controller on Amlogic's Meson SoCs.
+ This controller is found on Meson SoCs.
+
+config MTD_NAND_GPIO
+ tristate "GPIO assisted NAND controller"
+ depends on GPIOLIB || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This enables a NAND flash driver where control signals are
+ connected to GPIO pins, and commands and data are communicated
+ via a memory mapped interface.
+
+config MTD_NAND_PLATFORM
+ tristate "Generic NAND controller"
+ depends on HAS_IOMEM
+ help
+ This implements a generic NAND driver for on-SOC platform
+ devices. You will need to provide platform-specific functions
+ via platform_data.
+
+config MTD_NAND_CADENCE
+ tristate "Support Cadence NAND (HPNFC) controller"
+ depends on OF && HAS_IOMEM
+ help
+ Enable the driver for NAND flash on platforms using a Cadence NAND
+ controller.
+
+config MTD_NAND_ARASAN
+ tristate "Support for Arasan NAND flash controller"
+ depends on HAS_IOMEM && HAS_DMA
+ select BCH
+ help
+ Enables the driver for the Arasan NAND flash controller on
+ Zynq Ultrascale+ MPSoC.
+
+config MTD_NAND_INTEL_LGM
+ tristate "Support for NAND controller on Intel LGM SoC"
+ depends on OF
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash chips on Intel's LGM SoC.
+ NAND flash controller interfaced through the External Bus Unit.
+
+config MTD_NAND_ROCKCHIP
+ tristate "Rockchip NAND controller"
+ depends on ARCH_ROCKCHIP && HAS_IOMEM
+ help
+ Enables support for NAND controller on Rockchip SoCs.
+ There are four different versions of NAND FLASH Controllers,
+ including:
+ NFC v600: RK2928, RK3066, RK3188
+ NFC v622: RK3036, RK3128
+ NFC v800: RK3308, RV1108
+ NFC v900: PX30, RK3326
+
+config MTD_NAND_PL35X
+ tristate "ARM PL35X NAND controller"
+ depends on OF
+ depends on PL353_SMC
+ help
+ Enables support for PrimeCell SMC PL351 and PL353 NAND
+ controller found on Zynq7000.
+
+config MTD_NAND_RENESAS
+ tristate "Renesas R-Car Gen3 & RZ/N1 NAND controller"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ help
+ Enables support for the NAND controller found on Renesas R-Car
+ Gen3 and RZ/N1 SoC families.
+
+comment "Misc"
+
+config MTD_SM_COMMON
+ tristate
+ default n
+
+config MTD_NAND_NANDSIM
+ tristate "Support for NAND Flash Simulator"
+ help
+ The simulator may simulate various NAND flash chips for the
+ MTD nand layer.
+
+config MTD_NAND_RICOH
+ tristate "Ricoh xD card reader"
+ default n
+ depends on PCI
+ select MTD_SM_COMMON
+ help
+ Enable support for Ricoh R5C852 xD card reader
+ You also need to enable either
+ NAND SSFDC (SmartMedia) read only translation layer' or new
+ experimental, readwrite
+ 'SmartMedia/xD new translation layer'
+
+config MTD_NAND_DISKONCHIP
+ tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
+ depends on HAS_IOMEM
+ select REED_SOLOMON
+ select REED_SOLOMON_DEC16
+ help
+ This is a reimplementation of M-Systems DiskOnChip 2000,
+ Millennium and Millennium Plus as a standard NAND device driver,
+ as opposed to the earlier self-contained MTD device drivers.
+ This should enable, among other things, proper JFFS2 operation on
+ these devices.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ bool "Advanced detection options for DiskOnChip"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ This option allows you to specify nonstandard address at which to
+ probe for a DiskOnChip, or to change the detection options. You
+ are unlikely to need any of this unless you are using LinuxBIOS.
+ Say 'N'.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+ hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ depends on MTD_NAND_DISKONCHIP
+ default "0"
+ help
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option allows you to specify a single address at which to probe
+ for the device, which is useful if you have other devices in that
+ range which get upset when they are probed.
+
+ (Note that on PowerPC, the normal probe will only check at
+ 0xE4000000.)
+
+ Normally, you should leave this set to zero, to allow the probe at
+ the normal addresses.
+
+config MTD_NAND_DISKONCHIP_PROBE_HIGH
+ bool "Probe high addresses"
+ depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ help
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option changes to make it probe between 0xFFFC8000 and
+ 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
+ useful to you. Say 'N'.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+ bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+ and 2000 TSOP/Alon), Linux reserves some space at the end of the
+ device for the Bad Block Table (BBT). If you have existing INFTL
+ data on your device (created by non-Linux tools such as M-Systems'
+ DOS drivers), your data might overlap the area Linux wants to use for
+ the BBT. If this is a concern for you, leave this option disabled and
+ Linux will not write BBT data into this area.
+ The downside of leaving this option disabled is that if bad blocks
+ are detected by Linux, they will not be recorded in the BBT, which
+ could cause future problems.
+ Once you enable this option, new filesystems (INFTL or others, created
+ in Linux or other operating systems) will not use the reserved area.
+ The only reason not to enable this option is to prevent damage to
+ preexisting filesystems.
+ Even if you leave this disabled, you can enable BBT writes at module
+ load time (assuming you build diskonchip as a module) with the module
+ parameter "inftl_bbt_write=1".
+
+endif # MTD_RAW_NAND