summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/denali.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/mtd/nand/raw/denali.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mtd/nand/raw/denali.c')
-rw-r--r--drivers/mtd/nand/raw/denali.c1381
1 files changed, 1381 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
new file mode 100644
index 0000000000..fa2439cb4d
--- /dev/null
+++ b/drivers/mtd/nand/raw/denali.c
@@ -0,0 +1,1381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * Copyright (c) 2017-2019 Socionext Inc.
+ * Reworked by Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "denali.h"
+
+#define DENALI_NAND_NAME "denali-nand"
+
+/* for Indexed Addressing */
+#define DENALI_INDEXED_CTRL 0x00
+#define DENALI_INDEXED_DATA 0x10
+
+#define DENALI_MAP00 (0 << 26) /* direct access to buffer */
+#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */
+#define DENALI_MAP10 (2 << 26) /* high-level control plane */
+#define DENALI_MAP11 (3 << 26) /* direct controller access */
+
+/* MAP11 access cycle type */
+#define DENALI_MAP11_CMD ((DENALI_MAP11) | 0) /* command cycle */
+#define DENALI_MAP11_ADDR ((DENALI_MAP11) | 1) /* address cycle */
+#define DENALI_MAP11_DATA ((DENALI_MAP11) | 2) /* data cycle */
+
+#define DENALI_BANK(denali) ((denali)->active_bank << 24)
+
+#define DENALI_INVALID_BANK -1
+
+static struct denali_chip *to_denali_chip(struct nand_chip *chip)
+{
+ return container_of(chip, struct denali_chip, chip);
+}
+
+static struct denali_controller *to_denali_controller(struct nand_chip *chip)
+{
+ return container_of(chip->controller, struct denali_controller,
+ controller);
+}
+
+/*
+ * Direct Addressing - the slave address forms the control information (command
+ * type, bank, block, and page address). The slave data is the actual data to
+ * be transferred. This mode requires 28 bits of address region allocated.
+ */
+static u32 denali_direct_read(struct denali_controller *denali, u32 addr)
+{
+ return ioread32(denali->host + addr);
+}
+
+static void denali_direct_write(struct denali_controller *denali, u32 addr,
+ u32 data)
+{
+ iowrite32(data, denali->host + addr);
+}
+
+/*
+ * Indexed Addressing - address translation module intervenes in passing the
+ * control information. This mode reduces the required address range. The
+ * control information and transferred data are latched by the registers in
+ * the translation module.
+ */
+static u32 denali_indexed_read(struct denali_controller *denali, u32 addr)
+{
+ iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
+ return ioread32(denali->host + DENALI_INDEXED_DATA);
+}
+
+static void denali_indexed_write(struct denali_controller *denali, u32 addr,
+ u32 data)
+{
+ iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
+ iowrite32(data, denali->host + DENALI_INDEXED_DATA);
+}
+
+static void denali_enable_irq(struct denali_controller *denali)
+{
+ int i;
+
+ for (i = 0; i < denali->nbanks; i++)
+ iowrite32(U32_MAX, denali->reg + INTR_EN(i));
+ iowrite32(GLOBAL_INT_EN_FLAG, denali->reg + GLOBAL_INT_ENABLE);
+}
+
+static void denali_disable_irq(struct denali_controller *denali)
+{
+ int i;
+
+ for (i = 0; i < denali->nbanks; i++)
+ iowrite32(0, denali->reg + INTR_EN(i));
+ iowrite32(0, denali->reg + GLOBAL_INT_ENABLE);
+}
+
+static void denali_clear_irq(struct denali_controller *denali,
+ int bank, u32 irq_status)
+{
+ /* write one to clear bits */
+ iowrite32(irq_status, denali->reg + INTR_STATUS(bank));
+}
+
+static void denali_clear_irq_all(struct denali_controller *denali)
+{
+ int i;
+
+ for (i = 0; i < denali->nbanks; i++)
+ denali_clear_irq(denali, i, U32_MAX);
+}
+
+static irqreturn_t denali_isr(int irq, void *dev_id)
+{
+ struct denali_controller *denali = dev_id;
+ irqreturn_t ret = IRQ_NONE;
+ u32 irq_status;
+ int i;
+
+ spin_lock(&denali->irq_lock);
+
+ for (i = 0; i < denali->nbanks; i++) {
+ irq_status = ioread32(denali->reg + INTR_STATUS(i));
+ if (irq_status)
+ ret = IRQ_HANDLED;
+
+ denali_clear_irq(denali, i, irq_status);
+
+ if (i != denali->active_bank)
+ continue;
+
+ denali->irq_status |= irq_status;
+
+ if (denali->irq_status & denali->irq_mask)
+ complete(&denali->complete);
+ }
+
+ spin_unlock(&denali->irq_lock);
+
+ return ret;
+}
+
+static void denali_reset_irq(struct denali_controller *denali)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&denali->irq_lock, flags);
+ denali->irq_status = 0;
+ denali->irq_mask = 0;
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+}
+
+static u32 denali_wait_for_irq(struct denali_controller *denali, u32 irq_mask)
+{
+ unsigned long time_left, flags;
+ u32 irq_status;
+
+ spin_lock_irqsave(&denali->irq_lock, flags);
+
+ irq_status = denali->irq_status;
+
+ if (irq_mask & irq_status) {
+ /* return immediately if the IRQ has already happened. */
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+ return irq_status;
+ }
+
+ denali->irq_mask = irq_mask;
+ reinit_completion(&denali->complete);
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+
+ time_left = wait_for_completion_timeout(&denali->complete,
+ msecs_to_jiffies(1000));
+ if (!time_left) {
+ dev_err(denali->dev, "timeout while waiting for irq 0x%x\n",
+ irq_mask);
+ return 0;
+ }
+
+ return denali->irq_status;
+}
+
+static void denali_select_target(struct nand_chip *chip, int cs)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct denali_chip_sel *sel = &to_denali_chip(chip)->sels[cs];
+ struct mtd_info *mtd = nand_to_mtd(chip);
+
+ denali->active_bank = sel->bank;
+
+ iowrite32(1 << (chip->phys_erase_shift - chip->page_shift),
+ denali->reg + PAGES_PER_BLOCK);
+ iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
+ denali->reg + DEVICE_WIDTH);
+ iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
+ iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
+ iowrite32(chip->options & NAND_ROW_ADDR_3 ?
+ 0 : TWO_ROW_ADDR_CYCLES__FLAG,
+ denali->reg + TWO_ROW_ADDR_CYCLES);
+ iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
+ FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
+ denali->reg + ECC_CORRECTION);
+ iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE);
+ iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE);
+ iowrite32(chip->ecc.steps, denali->reg + CFG_NUM_DATA_BLOCKS);
+
+ if (chip->options & NAND_KEEP_TIMINGS)
+ return;
+
+ /* update timing registers unless NAND_KEEP_TIMINGS is set */
+ iowrite32(sel->hwhr2_and_we_2_re, denali->reg + TWHR2_AND_WE_2_RE);
+ iowrite32(sel->tcwaw_and_addr_2_data,
+ denali->reg + TCWAW_AND_ADDR_2_DATA);
+ iowrite32(sel->re_2_we, denali->reg + RE_2_WE);
+ iowrite32(sel->acc_clks, denali->reg + ACC_CLKS);
+ iowrite32(sel->rdwr_en_lo_cnt, denali->reg + RDWR_EN_LO_CNT);
+ iowrite32(sel->rdwr_en_hi_cnt, denali->reg + RDWR_EN_HI_CNT);
+ iowrite32(sel->cs_setup_cnt, denali->reg + CS_SETUP_CNT);
+ iowrite32(sel->re_2_re, denali->reg + RE_2_RE);
+}
+
+static int denali_change_column(struct nand_chip *chip, unsigned int offset,
+ void *buf, unsigned int len, bool write)
+{
+ if (write)
+ return nand_change_write_column_op(chip, offset, buf, len,
+ false);
+ else
+ return nand_change_read_column_op(chip, offset, buf, len,
+ false);
+}
+
+static int denali_payload_xfer(struct nand_chip *chip, void *buf, bool write)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int writesize = mtd->writesize;
+ int oob_skip = denali->oob_skip_bytes;
+ int ret, i, pos, len;
+
+ for (i = 0; i < ecc->steps; i++) {
+ pos = i * (ecc->size + ecc->bytes);
+ len = ecc->size;
+
+ if (pos >= writesize) {
+ pos += oob_skip;
+ } else if (pos + len > writesize) {
+ /* This chunk overwraps the BBM area. Must be split */
+ ret = denali_change_column(chip, pos, buf,
+ writesize - pos, write);
+ if (ret)
+ return ret;
+
+ buf += writesize - pos;
+ len -= writesize - pos;
+ pos = writesize + oob_skip;
+ }
+
+ ret = denali_change_column(chip, pos, buf, len, write);
+ if (ret)
+ return ret;
+
+ buf += len;
+ }
+
+ return 0;
+}
+
+static int denali_oob_xfer(struct nand_chip *chip, void *buf, bool write)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ int oob_skip = denali->oob_skip_bytes;
+ int ret, i, pos, len;
+
+ /* BBM at the beginning of the OOB area */
+ ret = denali_change_column(chip, writesize, buf, oob_skip, write);
+ if (ret)
+ return ret;
+
+ buf += oob_skip;
+
+ for (i = 0; i < ecc->steps; i++) {
+ pos = ecc->size + i * (ecc->size + ecc->bytes);
+
+ if (i == ecc->steps - 1)
+ /* The last chunk includes OOB free */
+ len = writesize + oobsize - pos - oob_skip;
+ else
+ len = ecc->bytes;
+
+ if (pos >= writesize) {
+ pos += oob_skip;
+ } else if (pos + len > writesize) {
+ /* This chunk overwraps the BBM area. Must be split */
+ ret = denali_change_column(chip, pos, buf,
+ writesize - pos, write);
+ if (ret)
+ return ret;
+
+ buf += writesize - pos;
+ len -= writesize - pos;
+ pos = writesize + oob_skip;
+ }
+
+ ret = denali_change_column(chip, pos, buf, len, write);
+ if (ret)
+ return ret;
+
+ buf += len;
+ }
+
+ return 0;
+}
+
+static int denali_read_raw(struct nand_chip *chip, void *buf, void *oob_buf,
+ int page)
+{
+ int ret;
+
+ if (!buf && !oob_buf)
+ return -EINVAL;
+
+ ret = nand_read_page_op(chip, page, 0, NULL, 0);
+ if (ret)
+ return ret;
+
+ if (buf) {
+ ret = denali_payload_xfer(chip, buf, false);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_buf) {
+ ret = denali_oob_xfer(chip, oob_buf, false);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int denali_write_raw(struct nand_chip *chip, const void *buf,
+ const void *oob_buf, int page)
+{
+ int ret;
+
+ if (!buf && !oob_buf)
+ return -EINVAL;
+
+ ret = nand_prog_page_begin_op(chip, page, 0, NULL, 0);
+ if (ret)
+ return ret;
+
+ if (buf) {
+ ret = denali_payload_xfer(chip, (void *)buf, true);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_buf) {
+ ret = denali_oob_xfer(chip, (void *)oob_buf, true);
+ if (ret)
+ return ret;
+ }
+
+ return nand_prog_page_end_op(chip);
+}
+
+static int denali_read_page_raw(struct nand_chip *chip, u8 *buf,
+ int oob_required, int page)
+{
+ return denali_read_raw(chip, buf, oob_required ? chip->oob_poi : NULL,
+ page);
+}
+
+static int denali_write_page_raw(struct nand_chip *chip, const u8 *buf,
+ int oob_required, int page)
+{
+ return denali_write_raw(chip, buf, oob_required ? chip->oob_poi : NULL,
+ page);
+}
+
+static int denali_read_oob(struct nand_chip *chip, int page)
+{
+ return denali_read_raw(chip, NULL, chip->oob_poi, page);
+}
+
+static int denali_write_oob(struct nand_chip *chip, int page)
+{
+ return denali_write_raw(chip, NULL, chip->oob_poi, page);
+}
+
+static int denali_check_erased_page(struct nand_chip *chip, u8 *buf,
+ unsigned long uncor_ecc_flags,
+ unsigned int max_bitflips)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ u8 *ecc_code = chip->oob_poi + denali->oob_skip_bytes;
+ int i, stat;
+
+ for (i = 0; i < ecc->steps; i++) {
+ if (!(uncor_ecc_flags & BIT(i)))
+ continue;
+
+ stat = nand_check_erased_ecc_chunk(buf, ecc->size, ecc_code,
+ ecc->bytes, NULL, 0,
+ ecc->strength);
+ if (stat < 0) {
+ ecc_stats->failed++;
+ } else {
+ ecc_stats->corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+
+ buf += ecc->size;
+ ecc_code += ecc->bytes;
+ }
+
+ return max_bitflips;
+}
+
+static int denali_hw_ecc_fixup(struct nand_chip *chip,
+ unsigned long *uncor_ecc_flags)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
+ int bank = denali->active_bank;
+ u32 ecc_cor;
+ unsigned int max_bitflips;
+
+ ecc_cor = ioread32(denali->reg + ECC_COR_INFO(bank));
+ ecc_cor >>= ECC_COR_INFO__SHIFT(bank);
+
+ if (ecc_cor & ECC_COR_INFO__UNCOR_ERR) {
+ /*
+ * This flag is set when uncorrectable error occurs at least in
+ * one ECC sector. We can not know "how many sectors", or
+ * "which sector(s)". We need erase-page check for all sectors.
+ */
+ *uncor_ecc_flags = GENMASK(chip->ecc.steps - 1, 0);
+ return 0;
+ }
+
+ max_bitflips = FIELD_GET(ECC_COR_INFO__MAX_ERRORS, ecc_cor);
+
+ /*
+ * The register holds the maximum of per-sector corrected bitflips.
+ * This is suitable for the return value of the ->read_page() callback.
+ * Unfortunately, we can not know the total number of corrected bits in
+ * the page. Increase the stats by max_bitflips. (compromised solution)
+ */
+ ecc_stats->corrected += max_bitflips;
+
+ return max_bitflips;
+}
+
+static int denali_sw_ecc_fixup(struct nand_chip *chip,
+ unsigned long *uncor_ecc_flags, u8 *buf)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
+ unsigned int ecc_size = chip->ecc.size;
+ unsigned int bitflips = 0;
+ unsigned int max_bitflips = 0;
+ u32 err_addr, err_cor_info;
+ unsigned int err_byte, err_sector, err_device;
+ u8 err_cor_value;
+ unsigned int prev_sector = 0;
+ u32 irq_status;
+
+ denali_reset_irq(denali);
+
+ do {
+ err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS);
+ err_sector = FIELD_GET(ECC_ERROR_ADDRESS__SECTOR, err_addr);
+ err_byte = FIELD_GET(ECC_ERROR_ADDRESS__OFFSET, err_addr);
+
+ err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO);
+ err_cor_value = FIELD_GET(ERR_CORRECTION_INFO__BYTE,
+ err_cor_info);
+ err_device = FIELD_GET(ERR_CORRECTION_INFO__DEVICE,
+ err_cor_info);
+
+ /* reset the bitflip counter when crossing ECC sector */
+ if (err_sector != prev_sector)
+ bitflips = 0;
+
+ if (err_cor_info & ERR_CORRECTION_INFO__UNCOR) {
+ /*
+ * Check later if this is a real ECC error, or
+ * an erased sector.
+ */
+ *uncor_ecc_flags |= BIT(err_sector);
+ } else if (err_byte < ecc_size) {
+ /*
+ * If err_byte is larger than ecc_size, means error
+ * happened in OOB, so we ignore it. It's no need for
+ * us to correct it err_device is represented the NAND
+ * error bits are happened in if there are more than
+ * one NAND connected.
+ */
+ int offset;
+ unsigned int flips_in_byte;
+
+ offset = (err_sector * ecc_size + err_byte) *
+ denali->devs_per_cs + err_device;
+
+ /* correct the ECC error */
+ flips_in_byte = hweight8(buf[offset] ^ err_cor_value);
+ buf[offset] ^= err_cor_value;
+ ecc_stats->corrected += flips_in_byte;
+ bitflips += flips_in_byte;
+
+ max_bitflips = max(max_bitflips, bitflips);
+ }
+
+ prev_sector = err_sector;
+ } while (!(err_cor_info & ERR_CORRECTION_INFO__LAST_ERR));
+
+ /*
+ * Once handle all ECC errors, controller will trigger an
+ * ECC_TRANSACTION_DONE interrupt.
+ */
+ irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE);
+ if (!(irq_status & INTR__ECC_TRANSACTION_DONE))
+ return -EIO;
+
+ return max_bitflips;
+}
+
+static void denali_setup_dma64(struct denali_controller *denali,
+ dma_addr_t dma_addr, int page, bool write)
+{
+ u32 mode;
+ const int page_count = 1;
+
+ mode = DENALI_MAP10 | DENALI_BANK(denali) | page;
+
+ /* DMA is a three step process */
+
+ /*
+ * 1. setup transfer type, interrupt when complete,
+ * burst len = 64 bytes, the number of pages
+ */
+ denali->host_write(denali, mode,
+ 0x01002000 | (64 << 16) |
+ (write ? BIT(8) : 0) | page_count);
+
+ /* 2. set memory low address */
+ denali->host_write(denali, mode, lower_32_bits(dma_addr));
+
+ /* 3. set memory high address */
+ denali->host_write(denali, mode, upper_32_bits(dma_addr));
+}
+
+static void denali_setup_dma32(struct denali_controller *denali,
+ dma_addr_t dma_addr, int page, bool write)
+{
+ u32 mode;
+ const int page_count = 1;
+
+ mode = DENALI_MAP10 | DENALI_BANK(denali);
+
+ /* DMA is a four step process */
+
+ /* 1. setup transfer type and # of pages */
+ denali->host_write(denali, mode | page,
+ 0x2000 | (write ? BIT(8) : 0) | page_count);
+
+ /* 2. set memory high address bits 23:8 */
+ denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
+
+ /* 3. set memory low address bits 23:8 */
+ denali->host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300);
+
+ /* 4. interrupt when complete, burst len = 64 bytes */
+ denali->host_write(denali, mode | 0x14000, 0x2400);
+}
+
+static int denali_pio_read(struct denali_controller *denali, u32 *buf,
+ size_t size, int page)
+{
+ u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
+ u32 irq_status, ecc_err_mask;
+ int i;
+
+ if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
+ ecc_err_mask = INTR__ECC_UNCOR_ERR;
+ else
+ ecc_err_mask = INTR__ECC_ERR;
+
+ denali_reset_irq(denali);
+
+ for (i = 0; i < size / 4; i++)
+ buf[i] = denali->host_read(denali, addr);
+
+ irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
+ if (!(irq_status & INTR__PAGE_XFER_INC))
+ return -EIO;
+
+ if (irq_status & INTR__ERASED_PAGE)
+ memset(buf, 0xff, size);
+
+ return irq_status & ecc_err_mask ? -EBADMSG : 0;
+}
+
+static int denali_pio_write(struct denali_controller *denali, const u32 *buf,
+ size_t size, int page)
+{
+ u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
+ u32 irq_status;
+ int i;
+
+ denali_reset_irq(denali);
+
+ for (i = 0; i < size / 4; i++)
+ denali->host_write(denali, addr, buf[i]);
+
+ irq_status = denali_wait_for_irq(denali,
+ INTR__PROGRAM_COMP |
+ INTR__PROGRAM_FAIL);
+ if (!(irq_status & INTR__PROGRAM_COMP))
+ return -EIO;
+
+ return 0;
+}
+
+static int denali_pio_xfer(struct denali_controller *denali, void *buf,
+ size_t size, int page, bool write)
+{
+ if (write)
+ return denali_pio_write(denali, buf, size, page);
+ else
+ return denali_pio_read(denali, buf, size, page);
+}
+
+static int denali_dma_xfer(struct denali_controller *denali, void *buf,
+ size_t size, int page, bool write)
+{
+ dma_addr_t dma_addr;
+ u32 irq_mask, irq_status, ecc_err_mask;
+ enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+ int ret = 0;
+
+ dma_addr = dma_map_single(denali->dev, buf, size, dir);
+ if (dma_mapping_error(denali->dev, dma_addr)) {
+ dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n");
+ return denali_pio_xfer(denali, buf, size, page, write);
+ }
+
+ if (write) {
+ /*
+ * INTR__PROGRAM_COMP is never asserted for the DMA transfer.
+ * We can use INTR__DMA_CMD_COMP instead. This flag is asserted
+ * when the page program is completed.
+ */
+ irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
+ ecc_err_mask = 0;
+ } else if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) {
+ irq_mask = INTR__DMA_CMD_COMP;
+ ecc_err_mask = INTR__ECC_UNCOR_ERR;
+ } else {
+ irq_mask = INTR__DMA_CMD_COMP;
+ ecc_err_mask = INTR__ECC_ERR;
+ }
+
+ iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE);
+ /*
+ * The ->setup_dma() hook kicks DMA by using the data/command
+ * interface, which belongs to a different AXI port from the
+ * register interface. Read back the register to avoid a race.
+ */
+ ioread32(denali->reg + DMA_ENABLE);
+
+ denali_reset_irq(denali);
+ denali->setup_dma(denali, dma_addr, page, write);
+
+ irq_status = denali_wait_for_irq(denali, irq_mask);
+ if (!(irq_status & INTR__DMA_CMD_COMP))
+ ret = -EIO;
+ else if (irq_status & ecc_err_mask)
+ ret = -EBADMSG;
+
+ iowrite32(0, denali->reg + DMA_ENABLE);
+
+ dma_unmap_single(denali->dev, dma_addr, size, dir);
+
+ if (irq_status & INTR__ERASED_PAGE)
+ memset(buf, 0xff, size);
+
+ return ret;
+}
+
+static int denali_page_xfer(struct nand_chip *chip, void *buf, size_t size,
+ int page, bool write)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+
+ denali_select_target(chip, chip->cur_cs);
+
+ if (denali->dma_avail)
+ return denali_dma_xfer(denali, buf, size, page, write);
+ else
+ return denali_pio_xfer(denali, buf, size, page, write);
+}
+
+static int denali_read_page(struct nand_chip *chip, u8 *buf,
+ int oob_required, int page)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ unsigned long uncor_ecc_flags = 0;
+ int stat = 0;
+ int ret;
+
+ ret = denali_page_xfer(chip, buf, mtd->writesize, page, false);
+ if (ret && ret != -EBADMSG)
+ return ret;
+
+ if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
+ stat = denali_hw_ecc_fixup(chip, &uncor_ecc_flags);
+ else if (ret == -EBADMSG)
+ stat = denali_sw_ecc_fixup(chip, &uncor_ecc_flags, buf);
+
+ if (stat < 0)
+ return stat;
+
+ if (uncor_ecc_flags) {
+ ret = denali_read_oob(chip, page);
+ if (ret)
+ return ret;
+
+ stat = denali_check_erased_page(chip, buf,
+ uncor_ecc_flags, stat);
+ }
+
+ return stat;
+}
+
+static int denali_write_page(struct nand_chip *chip, const u8 *buf,
+ int oob_required, int page)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+
+ return denali_page_xfer(chip, (void *)buf, mtd->writesize, page, true);
+}
+
+static int denali_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf)
+{
+ static const unsigned int data_setup_on_host = 10000;
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct denali_chip_sel *sel;
+ const struct nand_sdr_timings *timings;
+ unsigned long t_x, mult_x;
+ int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data;
+ int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup;
+ int addr_2_data_mask;
+ u32 tmp;
+
+ timings = nand_get_sdr_timings(conf);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ /* clk_x period in picoseconds */
+ t_x = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate);
+ if (!t_x)
+ return -EINVAL;
+
+ /*
+ * The bus interface clock, clk_x, is phase aligned with the core clock.
+ * The clk_x is an integral multiple N of the core clk. The value N is
+ * configured at IP delivery time, and its available value is 4, 5, 6.
+ */
+ mult_x = DIV_ROUND_CLOSEST_ULL(denali->clk_x_rate, denali->clk_rate);
+ if (mult_x < 4 || mult_x > 6)
+ return -EINVAL;
+
+ if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ sel = &to_denali_chip(chip)->sels[chipnr];
+
+ /* tRWH -> RE_2_WE */
+ re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_x);
+ re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE);
+
+ tmp = ioread32(denali->reg + RE_2_WE);
+ tmp &= ~RE_2_WE__VALUE;
+ tmp |= FIELD_PREP(RE_2_WE__VALUE, re_2_we);
+ sel->re_2_we = tmp;
+
+ /* tRHZ -> RE_2_RE */
+ re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_x);
+ re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE);
+
+ tmp = ioread32(denali->reg + RE_2_RE);
+ tmp &= ~RE_2_RE__VALUE;
+ tmp |= FIELD_PREP(RE_2_RE__VALUE, re_2_re);
+ sel->re_2_re = tmp;
+
+ /*
+ * tCCS, tWHR -> WE_2_RE
+ *
+ * With WE_2_RE properly set, the Denali controller automatically takes
+ * care of the delay; the driver need not set NAND_WAIT_TCCS.
+ */
+ we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min), t_x);
+ we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE);
+
+ tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
+ tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE;
+ tmp |= FIELD_PREP(TWHR2_AND_WE_2_RE__WE_2_RE, we_2_re);
+ sel->hwhr2_and_we_2_re = tmp;
+
+ /* tADL -> ADDR_2_DATA */
+
+ /* for older versions, ADDR_2_DATA is only 6 bit wide */
+ addr_2_data_mask = TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
+ if (denali->revision < 0x0501)
+ addr_2_data_mask >>= 1;
+
+ addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_x);
+ addr_2_data = min_t(int, addr_2_data, addr_2_data_mask);
+
+ tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
+ tmp &= ~TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
+ tmp |= FIELD_PREP(TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA, addr_2_data);
+ sel->tcwaw_and_addr_2_data = tmp;
+
+ /* tREH, tWH -> RDWR_EN_HI_CNT */
+ rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min),
+ t_x);
+ rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
+ tmp &= ~RDWR_EN_HI_CNT__VALUE;
+ tmp |= FIELD_PREP(RDWR_EN_HI_CNT__VALUE, rdwr_en_hi);
+ sel->rdwr_en_hi_cnt = tmp;
+
+ /*
+ * tREA -> ACC_CLKS
+ * tRP, tWP, tRHOH, tRC, tWC -> RDWR_EN_LO_CNT
+ */
+
+ /*
+ * Determine the minimum of acc_clks to meet the setup timing when
+ * capturing the incoming data.
+ *
+ * The delay on the chip side is well-defined as tREA, but we need to
+ * take additional delay into account. This includes a certain degree
+ * of unknowledge, such as signal propagation delays on the PCB and
+ * in the SoC, load capacity of the I/O pins, etc.
+ */
+ acc_clks = DIV_ROUND_UP(timings->tREA_max + data_setup_on_host, t_x);
+
+ /* Determine the minimum of rdwr_en_lo_cnt from RE#/WE# pulse width */
+ rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), t_x);
+
+ /* Extend rdwr_en_lo to meet the data hold timing */
+ rdwr_en_lo = max_t(int, rdwr_en_lo,
+ acc_clks - timings->tRHOH_min / t_x);
+
+ /* Extend rdwr_en_lo to meet the requirement for RE#/WE# cycle time */
+ rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min),
+ t_x);
+ rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi);
+ rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE);
+
+ /* Center the data latch timing for extra safety */
+ acc_clks = (acc_clks + rdwr_en_lo +
+ DIV_ROUND_UP(timings->tRHOH_min, t_x)) / 2;
+ acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE);
+
+ tmp = ioread32(denali->reg + ACC_CLKS);
+ tmp &= ~ACC_CLKS__VALUE;
+ tmp |= FIELD_PREP(ACC_CLKS__VALUE, acc_clks);
+ sel->acc_clks = tmp;
+
+ tmp = ioread32(denali->reg + RDWR_EN_LO_CNT);
+ tmp &= ~RDWR_EN_LO_CNT__VALUE;
+ tmp |= FIELD_PREP(RDWR_EN_LO_CNT__VALUE, rdwr_en_lo);
+ sel->rdwr_en_lo_cnt = tmp;
+
+ /* tCS, tCEA -> CS_SETUP_CNT */
+ cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_x) - rdwr_en_lo,
+ (int)DIV_ROUND_UP(timings->tCEA_max, t_x) - acc_clks,
+ 0);
+ cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + CS_SETUP_CNT);
+ tmp &= ~CS_SETUP_CNT__VALUE;
+ tmp |= FIELD_PREP(CS_SETUP_CNT__VALUE, cs_setup);
+ sel->cs_setup_cnt = tmp;
+
+ return 0;
+}
+
+int denali_calc_ecc_bytes(int step_size, int strength)
+{
+ /* BCH code. Denali requires ecc.bytes to be multiple of 2 */
+ return DIV_ROUND_UP(strength * fls(step_size * 8), 16) * 2;
+}
+EXPORT_SYMBOL(denali_calc_ecc_bytes);
+
+static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct denali_controller *denali = to_denali_controller(chip);
+
+ if (section > 0)
+ return -ERANGE;
+
+ oobregion->offset = denali->oob_skip_bytes;
+ oobregion->length = chip->ecc.total;
+
+ return 0;
+}
+
+static int denali_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct denali_controller *denali = to_denali_controller(chip);
+
+ if (section > 0)
+ return -ERANGE;
+
+ oobregion->offset = chip->ecc.total + denali->oob_skip_bytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
+ .ecc = denali_ooblayout_ecc,
+ .free = denali_ooblayout_free,
+};
+
+static int denali_multidev_fixup(struct nand_chip *chip)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
+
+ memorg = nanddev_get_memorg(&chip->base);
+
+ /*
+ * Support for multi device:
+ * When the IP configuration is x16 capable and two x8 chips are
+ * connected in parallel, DEVICES_CONNECTED should be set to 2.
+ * In this case, the core framework knows nothing about this fact,
+ * so we should tell it the _logical_ pagesize and anything necessary.
+ */
+ denali->devs_per_cs = ioread32(denali->reg + DEVICES_CONNECTED);
+
+ /*
+ * On some SoCs, DEVICES_CONNECTED is not auto-detected.
+ * For those, DEVICES_CONNECTED is left to 0. Set 1 if it is the case.
+ */
+ if (denali->devs_per_cs == 0) {
+ denali->devs_per_cs = 1;
+ iowrite32(1, denali->reg + DEVICES_CONNECTED);
+ }
+
+ if (denali->devs_per_cs == 1)
+ return 0;
+
+ if (denali->devs_per_cs != 2) {
+ dev_err(denali->dev, "unsupported number of devices %d\n",
+ denali->devs_per_cs);
+ return -EINVAL;
+ }
+
+ /* 2 chips in parallel */
+ memorg->pagesize <<= 1;
+ memorg->oobsize <<= 1;
+ mtd->size <<= 1;
+ mtd->erasesize <<= 1;
+ mtd->writesize <<= 1;
+ mtd->oobsize <<= 1;
+ chip->page_shift += 1;
+ chip->phys_erase_shift += 1;
+ chip->bbt_erase_shift += 1;
+ chip->chip_shift += 1;
+ chip->pagemask <<= 1;
+ chip->ecc.size <<= 1;
+ chip->ecc.bytes <<= 1;
+ chip->ecc.strength <<= 1;
+ denali->oob_skip_bytes <<= 1;
+
+ return 0;
+}
+
+static int denali_attach_chip(struct nand_chip *chip)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ int ret;
+
+ ret = nand_ecc_choose_conf(chip, denali->ecc_caps,
+ mtd->oobsize - denali->oob_skip_bytes);
+ if (ret) {
+ dev_err(denali->dev, "Failed to setup ECC settings.\n");
+ return ret;
+ }
+
+ dev_dbg(denali->dev,
+ "chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
+ chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
+
+ ret = denali_multidev_fixup(chip);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void denali_exec_in8(struct denali_controller *denali, u32 type,
+ u8 *buf, unsigned int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = denali->host_read(denali, type | DENALI_BANK(denali));
+}
+
+static void denali_exec_in16(struct denali_controller *denali, u32 type,
+ u8 *buf, unsigned int len)
+{
+ u32 data;
+ int i;
+
+ for (i = 0; i < len; i += 2) {
+ data = denali->host_read(denali, type | DENALI_BANK(denali));
+ /* bit 31:24 and 15:8 are used for DDR */
+ buf[i] = data;
+ buf[i + 1] = data >> 16;
+ }
+}
+
+static void denali_exec_in(struct denali_controller *denali, u32 type,
+ u8 *buf, unsigned int len, bool width16)
+{
+ if (width16)
+ denali_exec_in16(denali, type, buf, len);
+ else
+ denali_exec_in8(denali, type, buf, len);
+}
+
+static void denali_exec_out8(struct denali_controller *denali, u32 type,
+ const u8 *buf, unsigned int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ denali->host_write(denali, type | DENALI_BANK(denali), buf[i]);
+}
+
+static void denali_exec_out16(struct denali_controller *denali, u32 type,
+ const u8 *buf, unsigned int len)
+{
+ int i;
+
+ for (i = 0; i < len; i += 2)
+ denali->host_write(denali, type | DENALI_BANK(denali),
+ buf[i + 1] << 16 | buf[i]);
+}
+
+static void denali_exec_out(struct denali_controller *denali, u32 type,
+ const u8 *buf, unsigned int len, bool width16)
+{
+ if (width16)
+ denali_exec_out16(denali, type, buf, len);
+ else
+ denali_exec_out8(denali, type, buf, len);
+}
+
+static int denali_exec_waitrdy(struct denali_controller *denali)
+{
+ u32 irq_stat;
+
+ /* R/B# pin transitioned from low to high? */
+ irq_stat = denali_wait_for_irq(denali, INTR__INT_ACT);
+
+ /* Just in case nand_operation has multiple NAND_OP_WAITRDY_INSTR. */
+ denali_reset_irq(denali);
+
+ return irq_stat & INTR__INT_ACT ? 0 : -EIO;
+}
+
+static int denali_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ denali_exec_out8(denali, DENALI_MAP11_CMD,
+ &instr->ctx.cmd.opcode, 1);
+ return 0;
+ case NAND_OP_ADDR_INSTR:
+ denali_exec_out8(denali, DENALI_MAP11_ADDR,
+ instr->ctx.addr.addrs,
+ instr->ctx.addr.naddrs);
+ return 0;
+ case NAND_OP_DATA_IN_INSTR:
+ denali_exec_in(denali, DENALI_MAP11_DATA,
+ instr->ctx.data.buf.in,
+ instr->ctx.data.len,
+ !instr->ctx.data.force_8bit &&
+ chip->options & NAND_BUSWIDTH_16);
+ return 0;
+ case NAND_OP_DATA_OUT_INSTR:
+ denali_exec_out(denali, DENALI_MAP11_DATA,
+ instr->ctx.data.buf.out,
+ instr->ctx.data.len,
+ !instr->ctx.data.force_8bit &&
+ chip->options & NAND_BUSWIDTH_16);
+ return 0;
+ case NAND_OP_WAITRDY_INSTR:
+ return denali_exec_waitrdy(denali);
+ default:
+ WARN_ONCE(1, "unsupported NAND instruction type: %d\n",
+ instr->type);
+
+ return -EINVAL;
+ }
+}
+
+static int denali_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op, bool check_only)
+{
+ int i, ret;
+
+ if (check_only)
+ return 0;
+
+ denali_select_target(chip, op->cs);
+
+ /*
+ * Some commands contain NAND_OP_WAITRDY_INSTR.
+ * irq must be cleared here to catch the R/B# interrupt there.
+ */
+ denali_reset_irq(to_denali_controller(chip));
+
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = denali_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct nand_controller_ops denali_controller_ops = {
+ .attach_chip = denali_attach_chip,
+ .exec_op = denali_exec_op,
+ .setup_interface = denali_setup_interface,
+};
+
+int denali_chip_init(struct denali_controller *denali,
+ struct denali_chip *dchip)
+{
+ struct nand_chip *chip = &dchip->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct denali_chip *dchip2;
+ int i, j, ret;
+
+ chip->controller = &denali->controller;
+
+ /* sanity checks for bank numbers */
+ for (i = 0; i < dchip->nsels; i++) {
+ unsigned int bank = dchip->sels[i].bank;
+
+ if (bank >= denali->nbanks) {
+ dev_err(denali->dev, "unsupported bank %d\n", bank);
+ return -EINVAL;
+ }
+
+ for (j = 0; j < i; j++) {
+ if (bank == dchip->sels[j].bank) {
+ dev_err(denali->dev,
+ "bank %d is assigned twice in the same chip\n",
+ bank);
+ return -EINVAL;
+ }
+ }
+
+ list_for_each_entry(dchip2, &denali->chips, node) {
+ for (j = 0; j < dchip2->nsels; j++) {
+ if (bank == dchip2->sels[j].bank) {
+ dev_err(denali->dev,
+ "bank %d is already used\n",
+ bank);
+ return -EINVAL;
+ }
+ }
+ }
+ }
+
+ mtd->dev.parent = denali->dev;
+
+ /*
+ * Fallback to the default name if DT did not give "label" property.
+ * Use "label" property if multiple chips are connected.
+ */
+ if (!mtd->name && list_empty(&denali->chips))
+ mtd->name = "denali-nand";
+
+ if (denali->dma_avail) {
+ chip->options |= NAND_USES_DMA;
+ chip->buf_align = 16;
+ }
+
+ /* clk rate info is needed for setup_interface */
+ if (!denali->clk_rate || !denali->clk_x_rate)
+ chip->options |= NAND_KEEP_TIMINGS;
+
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
+ chip->ecc.read_page = denali_read_page;
+ chip->ecc.write_page = denali_write_page;
+ chip->ecc.read_page_raw = denali_read_page_raw;
+ chip->ecc.write_page_raw = denali_write_page_raw;
+ chip->ecc.read_oob = denali_read_oob;
+ chip->ecc.write_oob = denali_write_oob;
+
+ mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
+
+ ret = nand_scan(chip, dchip->nsels);
+ if (ret)
+ return ret;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret) {
+ dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
+ goto cleanup_nand;
+ }
+
+ list_add_tail(&dchip->node, &denali->chips);
+
+ return 0;
+
+cleanup_nand:
+ nand_cleanup(chip);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(denali_chip_init);
+
+int denali_init(struct denali_controller *denali)
+{
+ u32 features = ioread32(denali->reg + FEATURES);
+ int ret;
+
+ nand_controller_init(&denali->controller);
+ denali->controller.ops = &denali_controller_ops;
+ init_completion(&denali->complete);
+ spin_lock_init(&denali->irq_lock);
+ INIT_LIST_HEAD(&denali->chips);
+ denali->active_bank = DENALI_INVALID_BANK;
+
+ /*
+ * The REVISION register may not be reliable. Platforms are allowed to
+ * override it.
+ */
+ if (!denali->revision)
+ denali->revision = swab16(ioread32(denali->reg + REVISION));
+
+ denali->nbanks = 1 << FIELD_GET(FEATURES__N_BANKS, features);
+
+ /* the encoding changed from rev 5.0 to 5.1 */
+ if (denali->revision < 0x0501)
+ denali->nbanks <<= 1;
+
+ if (features & FEATURES__DMA)
+ denali->dma_avail = true;
+
+ if (denali->dma_avail) {
+ int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32;
+
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit));
+ if (ret) {
+ dev_info(denali->dev,
+ "Failed to set DMA mask. Disabling DMA.\n");
+ denali->dma_avail = false;
+ }
+ }
+
+ if (denali->dma_avail) {
+ if (denali->caps & DENALI_CAP_DMA_64BIT)
+ denali->setup_dma = denali_setup_dma64;
+ else
+ denali->setup_dma = denali_setup_dma32;
+ }
+
+ if (features & FEATURES__INDEX_ADDR) {
+ denali->host_read = denali_indexed_read;
+ denali->host_write = denali_indexed_write;
+ } else {
+ denali->host_read = denali_direct_read;
+ denali->host_write = denali_direct_write;
+ }
+
+ /*
+ * Set how many bytes should be skipped before writing data in OOB.
+ * If a platform requests a non-zero value, set it to the register.
+ * Otherwise, read the value out, expecting it has already been set up
+ * by firmware.
+ */
+ if (denali->oob_skip_bytes)
+ iowrite32(denali->oob_skip_bytes,
+ denali->reg + SPARE_AREA_SKIP_BYTES);
+ else
+ denali->oob_skip_bytes = ioread32(denali->reg +
+ SPARE_AREA_SKIP_BYTES);
+
+ iowrite32(0, denali->reg + TRANSFER_SPARE_REG);
+ iowrite32(GENMASK(denali->nbanks - 1, 0), denali->reg + RB_PIN_ENABLED);
+ iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
+ iowrite32(ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
+ iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
+ iowrite32(WRITE_PROTECT__FLAG, denali->reg + WRITE_PROTECT);
+
+ denali_clear_irq_all(denali);
+
+ ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
+ IRQF_SHARED, DENALI_NAND_NAME, denali);
+ if (ret) {
+ dev_err(denali->dev, "Unable to request IRQ\n");
+ return ret;
+ }
+
+ denali_enable_irq(denali);
+
+ return 0;
+}
+EXPORT_SYMBOL(denali_init);
+
+void denali_remove(struct denali_controller *denali)
+{
+ struct denali_chip *dchip, *tmp;
+ struct nand_chip *chip;
+ int ret;
+
+ list_for_each_entry_safe(dchip, tmp, &denali->chips, node) {
+ chip = &dchip->chip;
+ ret = mtd_device_unregister(nand_to_mtd(chip));
+ WARN_ON(ret);
+ nand_cleanup(chip);
+ list_del(&dchip->node);
+ }
+
+ denali_disable_irq(denali);
+}
+EXPORT_SYMBOL(denali_remove);
+
+MODULE_DESCRIPTION("Driver core for Denali NAND controller");
+MODULE_AUTHOR("Intel Corporation and its suppliers");
+MODULE_LICENSE("GPL v2");