diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/mtd/nand/raw/ingenic/jz4725b_bch.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mtd/nand/raw/ingenic/jz4725b_bch.c')
-rw-r--r-- | drivers/mtd/nand/raw/ingenic/jz4725b_bch.c | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c new file mode 100644 index 0000000000..2d0e0a2192 --- /dev/null +++ b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * JZ4725B BCH controller driver + * + * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net> + * + * Based on jz4780_bch.c + */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> + +#include "ingenic_ecc.h" + +#define BCH_BHCR 0x0 +#define BCH_BHCSR 0x4 +#define BCH_BHCCR 0x8 +#define BCH_BHCNT 0xc +#define BCH_BHDR 0x10 +#define BCH_BHPAR0 0x14 +#define BCH_BHERR0 0x28 +#define BCH_BHINT 0x24 +#define BCH_BHINTES 0x3c +#define BCH_BHINTEC 0x40 +#define BCH_BHINTE 0x38 + +#define BCH_BHCR_ENCE BIT(3) +#define BCH_BHCR_BSEL BIT(2) +#define BCH_BHCR_INIT BIT(1) +#define BCH_BHCR_BCHE BIT(0) + +#define BCH_BHCNT_DEC_COUNT_SHIFT 16 +#define BCH_BHCNT_DEC_COUNT_MASK (0x3ff << BCH_BHCNT_DEC_COUNT_SHIFT) +#define BCH_BHCNT_ENC_COUNT_SHIFT 0 +#define BCH_BHCNT_ENC_COUNT_MASK (0x3ff << BCH_BHCNT_ENC_COUNT_SHIFT) + +#define BCH_BHERR_INDEX0_SHIFT 0 +#define BCH_BHERR_INDEX0_MASK (0x1fff << BCH_BHERR_INDEX0_SHIFT) +#define BCH_BHERR_INDEX1_SHIFT 16 +#define BCH_BHERR_INDEX1_MASK (0x1fff << BCH_BHERR_INDEX1_SHIFT) + +#define BCH_BHINT_ERRC_SHIFT 28 +#define BCH_BHINT_ERRC_MASK (0xf << BCH_BHINT_ERRC_SHIFT) +#define BCH_BHINT_TERRC_SHIFT 16 +#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT) +#define BCH_BHINT_ALL_0 BIT(5) +#define BCH_BHINT_ALL_F BIT(4) +#define BCH_BHINT_DECF BIT(3) +#define BCH_BHINT_ENCF BIT(2) +#define BCH_BHINT_UNCOR BIT(1) +#define BCH_BHINT_ERR BIT(0) + +/* Timeout for BCH calculation/correction. */ +#define BCH_TIMEOUT_US 100000 + +static inline void jz4725b_bch_config_set(struct ingenic_ecc *bch, u32 cfg) +{ + writel(cfg, bch->base + BCH_BHCSR); +} + +static inline void jz4725b_bch_config_clear(struct ingenic_ecc *bch, u32 cfg) +{ + writel(cfg, bch->base + BCH_BHCCR); +} + +static int jz4725b_bch_reset(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, bool calc_ecc) +{ + u32 reg, max_value; + + /* Clear interrupt status. */ + writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT); + + /* Initialise and enable BCH. */ + jz4725b_bch_config_clear(bch, 0x1f); + jz4725b_bch_config_set(bch, BCH_BHCR_BCHE); + + if (params->strength == 8) + jz4725b_bch_config_set(bch, BCH_BHCR_BSEL); + else + jz4725b_bch_config_clear(bch, BCH_BHCR_BSEL); + + if (calc_ecc) /* calculate ECC from data */ + jz4725b_bch_config_set(bch, BCH_BHCR_ENCE); + else /* correct data from ECC */ + jz4725b_bch_config_clear(bch, BCH_BHCR_ENCE); + + jz4725b_bch_config_set(bch, BCH_BHCR_INIT); + + max_value = BCH_BHCNT_ENC_COUNT_MASK >> BCH_BHCNT_ENC_COUNT_SHIFT; + if (params->size > max_value) + return -EINVAL; + + max_value = BCH_BHCNT_DEC_COUNT_MASK >> BCH_BHCNT_DEC_COUNT_SHIFT; + if (params->size + params->bytes > max_value) + return -EINVAL; + + /* Set up BCH count register. */ + reg = params->size << BCH_BHCNT_ENC_COUNT_SHIFT; + reg |= (params->size + params->bytes) << BCH_BHCNT_DEC_COUNT_SHIFT; + writel(reg, bch->base + BCH_BHCNT); + + return 0; +} + +static void jz4725b_bch_disable(struct ingenic_ecc *bch) +{ + /* Clear interrupts */ + writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT); + + /* Disable the hardware */ + jz4725b_bch_config_clear(bch, BCH_BHCR_BCHE); +} + +static void jz4725b_bch_write_data(struct ingenic_ecc *bch, const u8 *buf, + size_t size) +{ + while (size--) + writeb(*buf++, bch->base + BCH_BHDR); +} + +static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf, + size_t size) +{ + size_t size32 = size / sizeof(u32); + size_t size8 = size % sizeof(u32); + u32 *dest32; + u8 *dest8; + u32 val, offset = 0; + + dest32 = (u32 *)buf; + while (size32--) { + *dest32++ = readl_relaxed(bch->base + BCH_BHPAR0 + offset); + offset += sizeof(u32); + } + + dest8 = (u8 *)dest32; + val = readl_relaxed(bch->base + BCH_BHPAR0 + offset); + switch (size8) { + case 3: + dest8[2] = (val >> 16) & 0xff; + fallthrough; + case 2: + dest8[1] = (val >> 8) & 0xff; + fallthrough; + case 1: + dest8[0] = val & 0xff; + break; + } +} + +static int jz4725b_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq, + u32 *status) +{ + u32 reg; + int ret; + + /* + * While we could use interrupts here and sleep until the operation + * completes, the controller works fairly quickly (usually a few + * microseconds) and so the overhead of sleeping until we get an + * interrupt quite noticeably decreases performance. + */ + ret = readl_relaxed_poll_timeout(bch->base + BCH_BHINT, reg, + reg & irq, 0, BCH_TIMEOUT_US); + if (ret) + return ret; + + if (status) + *status = reg; + + writel(reg, bch->base + BCH_BHINT); + + return 0; +} + +static int jz4725b_calculate(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, + const u8 *buf, u8 *ecc_code) +{ + int ret; + + mutex_lock(&bch->lock); + + ret = jz4725b_bch_reset(bch, params, true); + if (ret) { + dev_err(bch->dev, "Unable to init BCH with given parameters\n"); + goto out_disable; + } + + jz4725b_bch_write_data(bch, buf, params->size); + + ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL); + if (ret) { + dev_err(bch->dev, "timed out while calculating ECC\n"); + goto out_disable; + } + + jz4725b_bch_read_parity(bch, ecc_code, params->bytes); + +out_disable: + jz4725b_bch_disable(bch); + mutex_unlock(&bch->lock); + + return ret; +} + +static int jz4725b_correct(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, + u8 *buf, u8 *ecc_code) +{ + u32 reg, errors, bit; + unsigned int i; + int ret; + + mutex_lock(&bch->lock); + + ret = jz4725b_bch_reset(bch, params, false); + if (ret) { + dev_err(bch->dev, "Unable to init BCH with given parameters\n"); + goto out; + } + + jz4725b_bch_write_data(bch, buf, params->size); + jz4725b_bch_write_data(bch, ecc_code, params->bytes); + + ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_DECF, ®); + if (ret) { + dev_err(bch->dev, "timed out while correcting data\n"); + goto out; + } + + if (reg & (BCH_BHINT_ALL_F | BCH_BHINT_ALL_0)) { + /* Data and ECC is all 0xff or 0x00 - nothing to correct */ + ret = 0; + goto out; + } + + if (reg & BCH_BHINT_UNCOR) { + /* Uncorrectable ECC error */ + ret = -EBADMSG; + goto out; + } + + errors = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT; + + /* Correct any detected errors. */ + for (i = 0; i < errors; i++) { + if (i & 1) { + bit = (reg & BCH_BHERR_INDEX1_MASK) >> BCH_BHERR_INDEX1_SHIFT; + } else { + reg = readl(bch->base + BCH_BHERR0 + (i * 4)); + bit = (reg & BCH_BHERR_INDEX0_MASK) >> BCH_BHERR_INDEX0_SHIFT; + } + + buf[(bit >> 3)] ^= BIT(bit & 0x7); + } + +out: + jz4725b_bch_disable(bch); + mutex_unlock(&bch->lock); + + return ret; +} + +static const struct ingenic_ecc_ops jz4725b_bch_ops = { + .disable = jz4725b_bch_disable, + .calculate = jz4725b_calculate, + .correct = jz4725b_correct, +}; + +static const struct of_device_id jz4725b_bch_dt_match[] = { + { .compatible = "ingenic,jz4725b-bch", .data = &jz4725b_bch_ops }, + {}, +}; +MODULE_DEVICE_TABLE(of, jz4725b_bch_dt_match); + +static struct platform_driver jz4725b_bch_driver = { + .probe = ingenic_ecc_probe, + .driver = { + .name = "jz4725b-bch", + .of_match_table = jz4725b_bch_dt_match, + }, +}; +module_platform_driver(jz4725b_bch_driver); + +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); +MODULE_DESCRIPTION("Ingenic JZ4725B BCH controller driver"); +MODULE_LICENSE("GPL v2"); |