Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 418 insertions, 0 deletions

diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
new file mode 100644
index 0000000000..06e1651b59
--- /dev/null
+++ b/drivers/net/arcnet/com20020.c
@@ -0,0 +1,418 @@
+/*
+ * Linux ARCnet driver - COM20020 chipset support
+ *
+ * Written 1997 by David Woodhouse.
+ * Written 1994-1999 by Avery Pennarun.
+ * Written 1999 by Martin Mares <mj@ucw.cz>.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include "arcdevice.h"
+#include "com20020.h"
+
+static const char * const clockrates[] = {
+	"XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s",
+	"1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s",
+	"Reserved", "Reserved", "Reserved"
+};
+
+static void com20020_command(struct net_device *dev, int command);
+static int com20020_status(struct net_device *dev);
+static void com20020_setmask(struct net_device *dev, int mask);
+static int com20020_reset(struct net_device *dev, int really_reset);
+static void com20020_copy_to_card(struct net_device *dev, int bufnum,
+				  int offset, void *buf, int count);
+static void com20020_copy_from_card(struct net_device *dev, int bufnum,
+				    int offset, void *buf, int count);
+static void com20020_set_mc_list(struct net_device *dev);
+static void com20020_close(struct net_device *);
+
+static void com20020_copy_from_card(struct net_device *dev, int bufnum,
+				    int offset, void *buf, int count)
+{
+	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
+
+	/* set up the address register */
+	arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag,
+		    ioaddr, COM20020_REG_W_ADDR_HI);
+	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
+
+	/* copy the data */
+	TIME(dev, "insb", count,
+	     arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
+}
+
+static void com20020_copy_to_card(struct net_device *dev, int bufnum,
+				  int offset, void *buf, int count)
+{
+	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
+
+	/* set up the address register */
+	arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI);
+	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
+
+	/* copy the data */
+	TIME(dev, "outsb", count,
+	     arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
+}
+
+/* Reset the card and check some basic stuff during the detection stage. */
+int com20020_check(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr, status;
+	struct arcnet_local *lp = netdev_priv(dev);
+
+	arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
+	udelay(5);
+	arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG);
+	mdelay(RESETtime);
+
+	lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
+	lp->setup2 = (lp->clockm << 4) | 8;
+
+	/* CHECK: should we do this for SOHARD cards ? */
+	/* Enable P1Mode for backplane mode */
+	lp->setup = lp->setup | P1MODE;
+
+	com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+	arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+
+	if (lp->clockm != 0) {
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
+		arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
+
+		/* must now write the magic "restart operation" command */
+		mdelay(1);
+		arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
+	}
+
+	lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
+	/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG);
+
+	status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
+
+	if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
+		arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status);
+		return -ENODEV;
+	}
+	arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status);
+
+	arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+		    ioaddr, COM20020_REG_W_COMMAND);
+	status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
+	arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n",
+		   status);
+
+	/* Read first location of memory */
+	arcnet_outb(0 | RDDATAflag | AUTOINCflag,
+		    ioaddr, COM20020_REG_W_ADDR_HI);
+	arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO);
+
+	status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA);
+	if (status != TESTvalue) {
+		arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n",
+			   status);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int com20020_set_hwaddr(struct net_device *dev, void *addr)
+{
+	int ioaddr = dev->base_addr;
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct sockaddr *hwaddr = addr;
+
+	dev_addr_set(dev, hwaddr->sa_data);
+	com20020_set_subaddress(lp, ioaddr, SUB_NODE);
+	arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
+
+	return 0;
+}
+
+static int com20020_netdev_open(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct arcnet_local *lp = netdev_priv(dev);
+
+	lp->config |= TXENcfg;
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+
+	return arcnet_open(dev);
+}
+
+static int com20020_netdev_close(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct arcnet_local *lp = netdev_priv(dev);
+
+	arcnet_close(dev);
+
+	/* disable transmitter */
+	lp->config &= ~TXENcfg;
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	return 0;
+}
+
+const struct net_device_ops com20020_netdev_ops = {
+	.ndo_open	= com20020_netdev_open,
+	.ndo_stop	= com20020_netdev_close,
+	.ndo_start_xmit = arcnet_send_packet,
+	.ndo_tx_timeout = arcnet_timeout,
+	.ndo_set_mac_address = com20020_set_hwaddr,
+	.ndo_set_rx_mode = com20020_set_mc_list,
+};
+
+/* Set up the struct net_device associated with this card.  Called after
+ * probing succeeds.
+ */
+int com20020_found(struct net_device *dev, int shared)
+{
+	struct arcnet_local *lp;
+	int ioaddr = dev->base_addr;
+
+	/* Initialize the rest of the device structure. */
+
+	lp = netdev_priv(dev);
+
+	lp->hw.owner = THIS_MODULE;
+	lp->hw.command = com20020_command;
+	lp->hw.status = com20020_status;
+	lp->hw.intmask = com20020_setmask;
+	lp->hw.reset = com20020_reset;
+	lp->hw.copy_to_card = com20020_copy_to_card;
+	lp->hw.copy_from_card = com20020_copy_from_card;
+	lp->hw.close = com20020_close;
+
+	/* FIXME: do this some other way! */
+	if (!dev->dev_addr[0])
+		arcnet_set_addr(dev, arcnet_inb(ioaddr, 8));
+
+	com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+	arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+
+	if (lp->card_flags & ARC_CAN_10MBIT) {
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
+		arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
+
+		/* must now write the magic "restart operation" command */
+		mdelay(1);
+		arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
+	}
+
+	lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
+	/* Default 0x38 + register: Node ID */
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
+
+	/* reserve the irq */
+	if (request_irq(dev->irq, arcnet_interrupt, shared,
+			"arcnet (COM20020)", dev)) {
+		arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
+		return -ENODEV;
+	}
+
+	arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
+		   lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
+
+	if (lp->backplane)
+		arc_printk(D_NORMAL, dev, "Using backplane mode.\n");
+
+	if (lp->timeout != 3)
+		arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n",
+			   lp->timeout);
+
+	arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n",
+		   lp->setup >> 1,
+		   clockrates[3 -
+			      ((lp->setup2 & 0xF0) >> 4) +
+			      ((lp->setup & 0x0F) >> 1)]);
+			/* The clockrates array index looks very fragile.
+			 * It seems like it could have negative indexing.
+			 */
+
+	if (register_netdev(dev)) {
+		free_irq(dev->irq, dev);
+		return -EIO;
+	}
+	return 0;
+}
+
+/* Do a hardware reset on the card, and set up necessary registers.
+ *
+ * This should be called as little as possible, because it disrupts the
+ * token on the network (causes a RECON) and requires a significant delay.
+ *
+ * However, it does make sure the card is in a defined state.
+ */
+static int com20020_reset(struct net_device *dev, int really_reset)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	u_int ioaddr = dev->base_addr;
+	u_char inbyte;
+
+	arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
+		   __FILE__, __LINE__, __func__, dev, lp, dev->name);
+	arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
+		   dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS));
+
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+	lp->config |= (lp->timeout << 3) | (lp->backplane << 2);
+	/* power-up defaults */
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+
+	if (really_reset) {
+		/* reset the card */
+		arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
+		udelay(5);
+		arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+		mdelay(RESETtime * 2);
+				/* COM20020 seems to be slower sometimes */
+	}
+	/* clear flags & end reset */
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+	arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+		    ioaddr, COM20020_REG_W_COMMAND);
+
+	/* verify that the ARCnet signature byte is present */
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+
+	com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+	if (inbyte != TESTvalue) {
+		arc_printk(D_DEBUG, dev, "%s: %d: %s\n",
+			   __FILE__, __LINE__, __func__);
+		arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
+		return 1;
+	}
+	/* enable extended (512-byte) packets */
+	arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND);
+
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+
+	/* done!  return success. */
+	return 0;
+}
+
+static void com20020_setmask(struct net_device *dev, int mask)
+{
+	u_int ioaddr = dev->base_addr;
+
+	arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr);
+	arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK);
+}
+
+static void com20020_command(struct net_device *dev, int cmd)
+{
+	u_int ioaddr = dev->base_addr;
+
+	arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND);
+}
+
+static int com20020_status(struct net_device *dev)
+{
+	u_int ioaddr = dev->base_addr;
+
+	return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) +
+		(arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8);
+}
+
+static void com20020_close(struct net_device *dev)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+
+	/* disable transmitter */
+	lp->config &= ~TXENcfg;
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1    Promiscuous mode, receive all packets
+ * num_addrs == 0       Normal mode, clear multicast list
+ * num_addrs > 0        Multicast mode, receive normal and MC packets, and do
+ *                      best-effort filtering.
+ *      FIXME - do multicast stuff, not just promiscuous.
+ */
+static void com20020_set_mc_list(struct net_device *dev)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+
+	if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {
+		/* Enable promiscuous mode */
+		if (!(lp->setup & PROMISCset))
+			arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n");
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+		lp->setup |= PROMISCset;
+		arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+	} else {
+		/* Disable promiscuous mode, use normal mode */
+		if ((lp->setup & PROMISCset))
+			arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n");
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+		lp->setup &= ~PROMISCset;
+		arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+	}
+}
+
+#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \
+    defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \
+    defined(CONFIG_ARCNET_COM20020_CS_MODULE)
+EXPORT_SYMBOL(com20020_check);
+EXPORT_SYMBOL(com20020_found);
+EXPORT_SYMBOL(com20020_netdev_ops);
+#endif
+
+MODULE_LICENSE("GPL");
+
+#ifdef MODULE
+
+static int __init com20020_module_init(void)
+{
+	if (BUGLVL(D_NORMAL))
+		pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)");
+	return 0;
+}
+
+static void __exit com20020_module_exit(void)
+{
+}
+module_init(com20020_module_init);
+module_exit(com20020_module_exit);
+#endif				/* MODULE */