Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1201 insertions, 0 deletions

diff --git a/drivers/net/can/usb/f81604.c b/drivers/net/can/usb/f81604.c
new file mode 100644
index 0000000000..ec8cef7fd2
--- /dev/null
+++ b/drivers/net/can/usb/f81604.c
@@ -0,0 +1,1201 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Fintek F81604 USB-to-2CAN controller driver.
+ *
+ * Copyright (C) 2023 Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
+ */
+#include <linux/bitfield.h>
+#include <linux/netdevice.h>
+#include <linux/units.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/platform/sja1000.h>
+
+#include <asm-generic/unaligned.h>
+
+/* vendor and product id */
+#define F81604_VENDOR_ID 0x2c42
+#define F81604_PRODUCT_ID 0x1709
+#define F81604_CAN_CLOCK (12 * MEGA)
+#define F81604_MAX_DEV 2
+#define F81604_SET_DEVICE_RETRY 10
+
+#define F81604_USB_TIMEOUT 2000
+#define F81604_SET_GET_REGISTER 0xA0
+#define F81604_PORT_OFFSET 0x1000
+#define F81604_MAX_RX_URBS 4
+
+#define F81604_CMD_DATA 0x00
+
+#define F81604_DLC_LEN_MASK GENMASK(3, 0)
+#define F81604_DLC_EFF_BIT BIT(7)
+#define F81604_DLC_RTR_BIT BIT(6)
+
+#define F81604_SFF_SHIFT 5
+#define F81604_EFF_SHIFT 3
+
+#define F81604_BRP_MASK GENMASK(5, 0)
+#define F81604_SJW_MASK GENMASK(7, 6)
+
+#define F81604_SEG1_MASK GENMASK(3, 0)
+#define F81604_SEG2_MASK GENMASK(6, 4)
+
+#define F81604_CLEAR_ALC 0
+#define F81604_CLEAR_ECC 1
+#define F81604_CLEAR_OVERRUN 2
+
+/* device setting */
+#define F81604_CTRL_MODE_REG 0x80
+#define F81604_TX_ONESHOT (0x03 << 3)
+#define F81604_TX_NORMAL (0x01 << 3)
+#define F81604_RX_AUTO_RELEASE_BUF BIT(1)
+#define F81604_INT_WHEN_CHANGE BIT(0)
+
+#define F81604_TERMINATOR_REG 0x105
+#define F81604_CAN0_TERM BIT(2)
+#define F81604_CAN1_TERM BIT(3)
+
+#define F81604_TERMINATION_DISABLED CAN_TERMINATION_DISABLED
+#define F81604_TERMINATION_ENABLED 120
+
+/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
+#define F81604_SJA1000_MOD 0x00
+#define F81604_SJA1000_CMR 0x01
+#define F81604_SJA1000_IR 0x03
+#define F81604_SJA1000_IER 0x04
+#define F81604_SJA1000_ALC 0x0B
+#define F81604_SJA1000_ECC 0x0C
+#define F81604_SJA1000_RXERR 0x0E
+#define F81604_SJA1000_TXERR 0x0F
+#define F81604_SJA1000_ACCC0 0x10
+#define F81604_SJA1000_ACCM0 0x14
+#define F81604_MAX_FILTER_CNT 4
+
+/* Common registers - manual section 6.5 */
+#define F81604_SJA1000_BTR0 0x06
+#define F81604_SJA1000_BTR1 0x07
+#define F81604_SJA1000_BTR1_SAMPLE_TRIPLE BIT(7)
+#define F81604_SJA1000_OCR 0x08
+#define F81604_SJA1000_CDR 0x1F
+
+/* mode register */
+#define F81604_SJA1000_MOD_RM 0x01
+#define F81604_SJA1000_MOD_LOM 0x02
+#define F81604_SJA1000_MOD_STM 0x04
+
+/* commands */
+#define F81604_SJA1000_CMD_CDO 0x08
+
+/* interrupt sources */
+#define F81604_SJA1000_IRQ_BEI 0x80
+#define F81604_SJA1000_IRQ_ALI 0x40
+#define F81604_SJA1000_IRQ_EPI 0x20
+#define F81604_SJA1000_IRQ_DOI 0x08
+#define F81604_SJA1000_IRQ_EI 0x04
+#define F81604_SJA1000_IRQ_TI 0x02
+#define F81604_SJA1000_IRQ_RI 0x01
+#define F81604_SJA1000_IRQ_ALL 0xFF
+#define F81604_SJA1000_IRQ_OFF 0x00
+
+/* status register content */
+#define F81604_SJA1000_SR_BS 0x80
+#define F81604_SJA1000_SR_ES 0x40
+#define F81604_SJA1000_SR_TCS 0x08
+
+/* ECC register */
+#define F81604_SJA1000_ECC_SEG 0x1F
+#define F81604_SJA1000_ECC_DIR 0x20
+#define F81604_SJA1000_ECC_BIT 0x00
+#define F81604_SJA1000_ECC_FORM 0x40
+#define F81604_SJA1000_ECC_STUFF 0x80
+#define F81604_SJA1000_ECC_MASK 0xc0
+
+/* ALC register */
+#define F81604_SJA1000_ALC_MASK 0x1f
+
+/* table of devices that work with this driver */
+static const struct usb_device_id f81604_table[] = {
+	{ USB_DEVICE(F81604_VENDOR_ID, F81604_PRODUCT_ID) },
+	{} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, f81604_table);
+
+static const struct ethtool_ops f81604_ethtool_ops = {
+	.get_ts_info = ethtool_op_get_ts_info,
+};
+
+static const u16 f81604_termination[] = { F81604_TERMINATION_DISABLED,
+					  F81604_TERMINATION_ENABLED };
+
+struct f81604_priv {
+	struct net_device *netdev[F81604_MAX_DEV];
+};
+
+struct f81604_port_priv {
+	struct can_priv can;
+	struct net_device *netdev;
+	struct sk_buff *echo_skb;
+
+	unsigned long clear_flags;
+	struct work_struct clear_reg_work;
+
+	struct usb_device *dev;
+	struct usb_interface *intf;
+
+	struct usb_anchor urbs_anchor;
+};
+
+/* Interrupt endpoint data format:
+ *	Byte 0: Status register.
+ *	Byte 1: Interrupt register.
+ *	Byte 2: Interrupt enable register.
+ *	Byte 3: Arbitration lost capture(ALC) register.
+ *	Byte 4: Error code capture(ECC) register.
+ *	Byte 5: Error warning limit register.
+ *	Byte 6: RX error counter register.
+ *	Byte 7: TX error counter register.
+ *	Byte 8: Reserved.
+ */
+struct f81604_int_data {
+	u8 sr;
+	u8 isrc;
+	u8 ier;
+	u8 alc;
+	u8 ecc;
+	u8 ewlr;
+	u8 rxerr;
+	u8 txerr;
+	u8 val;
+} __packed __aligned(4);
+
+struct f81604_sff {
+	__be16 id;
+	u8 data[CAN_MAX_DLEN];
+} __packed __aligned(2);
+
+struct f81604_eff {
+	__be32 id;
+	u8 data[CAN_MAX_DLEN];
+} __packed __aligned(2);
+
+struct f81604_can_frame {
+	u8 cmd;
+
+	/* According for F81604 DLC define:
+	 *	bit 3~0: data length (0~8)
+	 *	bit6: is RTR flag.
+	 *	bit7: is EFF frame.
+	 */
+	u8 dlc;
+
+	union {
+		struct f81604_sff sff;
+		struct f81604_eff eff;
+	};
+} __packed __aligned(2);
+
+static const u8 bulk_in_addr[F81604_MAX_DEV] = { 2, 4 };
+static const u8 bulk_out_addr[F81604_MAX_DEV] = { 1, 3 };
+static const u8 int_in_addr[F81604_MAX_DEV] = { 1, 3 };
+
+static int f81604_write(struct usb_device *dev, u16 reg, u8 data)
+{
+	int ret;
+
+	ret = usb_control_msg_send(dev, 0, F81604_SET_GET_REGISTER,
+				   USB_TYPE_VENDOR | USB_DIR_OUT, 0, reg,
+				   &data, sizeof(data), F81604_USB_TIMEOUT,
+				   GFP_KERNEL);
+	if (ret)
+		dev_err(&dev->dev, "%s: reg: %x data: %x failed: %pe\n",
+			__func__, reg, data, ERR_PTR(ret));
+
+	return ret;
+}
+
+static int f81604_read(struct usb_device *dev, u16 reg, u8 *data)
+{
+	int ret;
+
+	ret = usb_control_msg_recv(dev, 0, F81604_SET_GET_REGISTER,
+				   USB_TYPE_VENDOR | USB_DIR_IN, 0, reg, data,
+				   sizeof(*data), F81604_USB_TIMEOUT,
+				   GFP_KERNEL);
+
+	if (ret < 0)
+		dev_err(&dev->dev, "%s: reg: %x failed: %pe\n", __func__, reg,
+			ERR_PTR(ret));
+
+	return ret;
+}
+
+static int f81604_update_bits(struct usb_device *dev, u16 reg, u8 mask,
+			      u8 data)
+{
+	int ret;
+	u8 tmp;
+
+	ret = f81604_read(dev, reg, &tmp);
+	if (ret)
+		return ret;
+
+	tmp &= ~mask;
+	tmp |= (mask & data);
+
+	return f81604_write(dev, reg, tmp);
+}
+
+static int f81604_sja1000_write(struct f81604_port_priv *priv, u16 reg,
+				u8 data)
+{
+	int port = priv->netdev->dev_port;
+	int real_reg;
+
+	real_reg = reg + F81604_PORT_OFFSET * port + F81604_PORT_OFFSET;
+	return f81604_write(priv->dev, real_reg, data);
+}
+
+static int f81604_sja1000_read(struct f81604_port_priv *priv, u16 reg,
+			       u8 *data)
+{
+	int port = priv->netdev->dev_port;
+	int real_reg;
+
+	real_reg = reg + F81604_PORT_OFFSET * port + F81604_PORT_OFFSET;
+	return f81604_read(priv->dev, real_reg, data);
+}
+
+static int f81604_set_reset_mode(struct f81604_port_priv *priv)
+{
+	int ret, i;
+	u8 tmp;
+
+	/* disable interrupts */
+	ret = f81604_sja1000_write(priv, F81604_SJA1000_IER,
+				   F81604_SJA1000_IRQ_OFF);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < F81604_SET_DEVICE_RETRY; i++) {
+		ret = f81604_sja1000_read(priv, F81604_SJA1000_MOD, &tmp);
+		if (ret)
+			return ret;
+
+		/* check reset bit */
+		if (tmp & F81604_SJA1000_MOD_RM) {
+			priv->can.state = CAN_STATE_STOPPED;
+			return 0;
+		}
+
+		/* reset chip */
+		ret = f81604_sja1000_write(priv, F81604_SJA1000_MOD,
+					   F81604_SJA1000_MOD_RM);
+		if (ret)
+			return ret;
+	}
+
+	return -EPERM;
+}
+
+static int f81604_set_normal_mode(struct f81604_port_priv *priv)
+{
+	u8 tmp, ier = 0;
+	u8 mod_reg = 0;
+	int ret, i;
+
+	for (i = 0; i < F81604_SET_DEVICE_RETRY; i++) {
+		ret = f81604_sja1000_read(priv, F81604_SJA1000_MOD, &tmp);
+		if (ret)
+			return ret;
+
+		/* check reset bit */
+		if ((tmp & F81604_SJA1000_MOD_RM) == 0) {
+			priv->can.state = CAN_STATE_ERROR_ACTIVE;
+			/* enable interrupts, RI handled by bulk-in */
+			ier = F81604_SJA1000_IRQ_ALL & ~F81604_SJA1000_IRQ_RI;
+			if (!(priv->can.ctrlmode &
+			      CAN_CTRLMODE_BERR_REPORTING))
+				ier &= ~F81604_SJA1000_IRQ_BEI;
+
+			return f81604_sja1000_write(priv, F81604_SJA1000_IER,
+						    ier);
+		}
+
+		/* set chip to normal mode */
+		if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
+			mod_reg |= F81604_SJA1000_MOD_LOM;
+		if (priv->can.ctrlmode & CAN_CTRLMODE_PRESUME_ACK)
+			mod_reg |= F81604_SJA1000_MOD_STM;
+
+		ret = f81604_sja1000_write(priv, F81604_SJA1000_MOD, mod_reg);
+		if (ret)
+			return ret;
+	}
+
+	return -EPERM;
+}
+
+static int f81604_chipset_init(struct f81604_port_priv *priv)
+{
+	int i, ret;
+
+	/* set clock divider and output control register */
+	ret = f81604_sja1000_write(priv, F81604_SJA1000_CDR,
+				   CDR_CBP | CDR_PELICAN);
+	if (ret)
+		return ret;
+
+	/* set acceptance filter (accept all) */
+	for (i = 0; i < F81604_MAX_FILTER_CNT; ++i) {
+		ret = f81604_sja1000_write(priv, F81604_SJA1000_ACCC0 + i, 0);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < F81604_MAX_FILTER_CNT; ++i) {
+		ret = f81604_sja1000_write(priv, F81604_SJA1000_ACCM0 + i,
+					   0xFF);
+		if (ret)
+			return ret;
+	}
+
+	return f81604_sja1000_write(priv, F81604_SJA1000_OCR,
+				    OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL |
+					    OCR_MODE_NORMAL);
+}
+
+static void f81604_process_rx_packet(struct net_device *netdev,
+				     struct f81604_can_frame *frame)
+{
+	struct net_device_stats *stats = &netdev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	if (frame->cmd != F81604_CMD_DATA)
+		return;
+
+	skb = alloc_can_skb(netdev, &cf);
+	if (!skb) {
+		stats->rx_dropped++;
+		return;
+	}
+
+	cf->len = can_cc_dlc2len(frame->dlc & F81604_DLC_LEN_MASK);
+
+	if (frame->dlc & F81604_DLC_EFF_BIT) {
+		cf->can_id = get_unaligned_be32(&frame->eff.id) >>
+			     F81604_EFF_SHIFT;
+		cf->can_id |= CAN_EFF_FLAG;
+
+		if (!(frame->dlc & F81604_DLC_RTR_BIT))
+			memcpy(cf->data, frame->eff.data, cf->len);
+	} else {
+		cf->can_id = get_unaligned_be16(&frame->sff.id) >>
+			     F81604_SFF_SHIFT;
+
+		if (!(frame->dlc & F81604_DLC_RTR_BIT))
+			memcpy(cf->data, frame->sff.data, cf->len);
+	}
+
+	if (frame->dlc & F81604_DLC_RTR_BIT)
+		cf->can_id |= CAN_RTR_FLAG;
+	else
+		stats->rx_bytes += cf->len;
+
+	stats->rx_packets++;
+	netif_rx(skb);
+}
+
+static void f81604_read_bulk_callback(struct urb *urb)
+{
+	struct f81604_can_frame *frame = urb->transfer_buffer;
+	struct net_device *netdev = urb->context;
+	int ret;
+
+	if (!netif_device_present(netdev))
+		return;
+
+	if (urb->status)
+		netdev_info(netdev, "%s: URB aborted %pe\n", __func__,
+			    ERR_PTR(urb->status));
+
+	switch (urb->status) {
+	case 0: /* success */
+		break;
+
+	case -ENOENT:
+	case -EPIPE:
+	case -EPROTO:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		goto resubmit_urb;
+	}
+
+	if (urb->actual_length != sizeof(*frame)) {
+		netdev_warn(netdev, "URB length %u not equal to %zu\n",
+			    urb->actual_length, sizeof(*frame));
+		goto resubmit_urb;
+	}
+
+	f81604_process_rx_packet(netdev, frame);
+
+resubmit_urb:
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret == -ENODEV)
+		netif_device_detach(netdev);
+	else if (ret)
+		netdev_err(netdev,
+			   "%s: failed to resubmit read bulk urb: %pe\n",
+			   __func__, ERR_PTR(ret));
+}
+
+static void f81604_handle_tx(struct f81604_port_priv *priv,
+			     struct f81604_int_data *data)
+{
+	struct net_device *netdev = priv->netdev;
+	struct net_device_stats *stats = &netdev->stats;
+
+	/* transmission buffer released */
+	if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT &&
+	    !(data->sr & F81604_SJA1000_SR_TCS)) {
+		stats->tx_errors++;
+		can_free_echo_skb(netdev, 0, NULL);
+	} else {
+		/* transmission complete */
+		stats->tx_bytes += can_get_echo_skb(netdev, 0, NULL);
+		stats->tx_packets++;
+	}
+
+	netif_wake_queue(netdev);
+}
+
+static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv,
+					 struct f81604_int_data *data)
+{
+	enum can_state can_state = priv->can.state;
+	struct net_device *netdev = priv->netdev;
+	struct net_device_stats *stats = &netdev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	/* Note: ALC/ECC will not auto clear by read here, must be cleared by
+	 * read register (via clear_reg_work).
+	 */
+
+	skb = alloc_can_err_skb(netdev, &cf);
+	if (skb) {
+		cf->can_id |= CAN_ERR_CNT;
+		cf->data[6] = data->txerr;
+		cf->data[7] = data->rxerr;
+	}
+
+	if (data->isrc & F81604_SJA1000_IRQ_DOI) {
+		/* data overrun interrupt */
+		netdev_dbg(netdev, "data overrun interrupt\n");
+
+		if (skb) {
+			cf->can_id |= CAN_ERR_CRTL;
+			cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		}
+
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+
+		set_bit(F81604_CLEAR_OVERRUN, &priv->clear_flags);
+	}
+
+	if (data->isrc & F81604_SJA1000_IRQ_EI) {
+		/* error warning interrupt */
+		netdev_dbg(netdev, "error warning interrupt\n");
+
+		if (data->sr & F81604_SJA1000_SR_BS)
+			can_state = CAN_STATE_BUS_OFF;
+		else if (data->sr & F81604_SJA1000_SR_ES)
+			can_state = CAN_STATE_ERROR_WARNING;
+		else
+			can_state = CAN_STATE_ERROR_ACTIVE;
+	}
+
+	if (data->isrc & F81604_SJA1000_IRQ_BEI) {
+		/* bus error interrupt */
+		netdev_dbg(netdev, "bus error interrupt\n");
+
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+
+		if (skb) {
+			cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+			/* set error type */
+			switch (data->ecc & F81604_SJA1000_ECC_MASK) {
+			case F81604_SJA1000_ECC_BIT:
+				cf->data[2] |= CAN_ERR_PROT_BIT;
+				break;
+			case F81604_SJA1000_ECC_FORM:
+				cf->data[2] |= CAN_ERR_PROT_FORM;
+				break;
+			case F81604_SJA1000_ECC_STUFF:
+				cf->data[2] |= CAN_ERR_PROT_STUFF;
+				break;
+			default:
+				break;
+			}
+
+			/* set error location */
+			cf->data[3] = data->ecc & F81604_SJA1000_ECC_SEG;
+
+			/* Error occurred during transmission? */
+			if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0)
+				cf->data[2] |= CAN_ERR_PROT_TX;
+		}
+
+		set_bit(F81604_CLEAR_ECC, &priv->clear_flags);
+	}
+
+	if (data->isrc & F81604_SJA1000_IRQ_EPI) {
+		if (can_state == CAN_STATE_ERROR_PASSIVE)
+			can_state = CAN_STATE_ERROR_WARNING;
+		else
+			can_state = CAN_STATE_ERROR_PASSIVE;
+
+		/* error passive interrupt */
+		netdev_dbg(netdev, "error passive interrupt: %d\n", can_state);
+	}
+
+	if (data->isrc & F81604_SJA1000_IRQ_ALI) {
+		/* arbitration lost interrupt */
+		netdev_dbg(netdev, "arbitration lost interrupt\n");
+
+		priv->can.can_stats.arbitration_lost++;
+
+		if (skb) {
+			cf->can_id |= CAN_ERR_LOSTARB;
+			cf->data[0] = data->alc & F81604_SJA1000_ALC_MASK;
+		}
+
+		set_bit(F81604_CLEAR_ALC, &priv->clear_flags);
+	}
+
+	if (can_state != priv->can.state) {
+		enum can_state tx_state, rx_state;
+
+		tx_state = data->txerr >= data->rxerr ? can_state : 0;
+		rx_state = data->txerr <= data->rxerr ? can_state : 0;
+
+		can_change_state(netdev, cf, tx_state, rx_state);
+
+		if (can_state == CAN_STATE_BUS_OFF)
+			can_bus_off(netdev);
+	}
+
+	if (priv->clear_flags)
+		schedule_work(&priv->clear_reg_work);
+
+	if (skb)
+		netif_rx(skb);
+}
+
+static void f81604_read_int_callback(struct urb *urb)
+{
+	struct f81604_int_data *data = urb->transfer_buffer;
+	struct net_device *netdev = urb->context;
+	struct f81604_port_priv *priv;
+	int ret;
+
+	priv = netdev_priv(netdev);
+
+	if (!netif_device_present(netdev))
+		return;
+
+	if (urb->status)
+		netdev_info(netdev, "%s: Int URB aborted: %pe\n", __func__,
+			    ERR_PTR(urb->status));
+
+	switch (urb->status) {
+	case 0: /* success */
+		break;
+
+	case -ENOENT:
+	case -EPIPE:
+	case -EPROTO:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		goto resubmit_urb;
+	}
+
+	/* handle Errors */
+	if (data->isrc & (F81604_SJA1000_IRQ_DOI | F81604_SJA1000_IRQ_EI |
+			  F81604_SJA1000_IRQ_BEI | F81604_SJA1000_IRQ_EPI |
+			  F81604_SJA1000_IRQ_ALI))
+		f81604_handle_can_bus_errors(priv, data);
+
+	/* handle TX */
+	if (priv->can.state != CAN_STATE_BUS_OFF &&
+	    (data->isrc & F81604_SJA1000_IRQ_TI))
+		f81604_handle_tx(priv, data);
+
+resubmit_urb:
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret == -ENODEV)
+		netif_device_detach(netdev);
+	else if (ret)
+		netdev_err(netdev, "%s: failed to resubmit int urb: %pe\n",
+			   __func__, ERR_PTR(ret));
+}
+
+static void f81604_unregister_urbs(struct f81604_port_priv *priv)
+{
+	usb_kill_anchored_urbs(&priv->urbs_anchor);
+}
+
+static int f81604_register_urbs(struct f81604_port_priv *priv)
+{
+	struct net_device *netdev = priv->netdev;
+	struct f81604_int_data *int_data;
+	int id = netdev->dev_port;
+	struct urb *int_urb;
+	int rx_urb_cnt;
+	int ret;
+
+	for (rx_urb_cnt = 0; rx_urb_cnt < F81604_MAX_RX_URBS; ++rx_urb_cnt) {
+		struct f81604_can_frame *frame;
+		struct urb *rx_urb;
+
+		rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!rx_urb) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		frame = kmalloc(sizeof(*frame), GFP_KERNEL);
+		if (!frame) {
+			usb_free_urb(rx_urb);
+			ret = -ENOMEM;
+			break;
+		}
+
+		usb_fill_bulk_urb(rx_urb, priv->dev,
+				  usb_rcvbulkpipe(priv->dev, bulk_in_addr[id]),
+				  frame, sizeof(*frame),
+				  f81604_read_bulk_callback, netdev);
+
+		rx_urb->transfer_flags |= URB_FREE_BUFFER;
+		usb_anchor_urb(rx_urb, &priv->urbs_anchor);
+
+		ret = usb_submit_urb(rx_urb, GFP_KERNEL);
+		if (ret) {
+			usb_unanchor_urb(rx_urb);
+			usb_free_urb(rx_urb);
+			break;
+		}
+
+		/* Drop reference, USB core will take care of freeing it */
+		usb_free_urb(rx_urb);
+	}
+
+	if (rx_urb_cnt == 0) {
+		netdev_warn(netdev, "%s: submit rx urb failed: %pe\n",
+			    __func__, ERR_PTR(ret));
+
+		goto error;
+	}
+
+	int_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!int_urb) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	int_data = kmalloc(sizeof(*int_data), GFP_KERNEL);
+	if (!int_data) {
+		usb_free_urb(int_urb);
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	usb_fill_int_urb(int_urb, priv->dev,
+			 usb_rcvintpipe(priv->dev, int_in_addr[id]), int_data,
+			 sizeof(*int_data), f81604_read_int_callback, netdev,
+			 1);
+
+	int_urb->transfer_flags |= URB_FREE_BUFFER;
+	usb_anchor_urb(int_urb, &priv->urbs_anchor);
+
+	ret = usb_submit_urb(int_urb, GFP_KERNEL);
+	if (ret) {
+		usb_unanchor_urb(int_urb);
+		usb_free_urb(int_urb);
+
+		netdev_warn(netdev, "%s: submit int urb failed: %pe\n",
+			    __func__, ERR_PTR(ret));
+		goto error;
+	}
+
+	/* Drop reference, USB core will take care of freeing it */
+	usb_free_urb(int_urb);
+
+	return 0;
+
+error:
+	f81604_unregister_urbs(priv);
+	return ret;
+}
+
+static int f81604_start(struct net_device *netdev)
+{
+	struct f81604_port_priv *priv = netdev_priv(netdev);
+	int ret;
+	u8 mode;
+	u8 tmp;
+
+	mode = F81604_RX_AUTO_RELEASE_BUF | F81604_INT_WHEN_CHANGE;
+
+	/* Set TR/AT mode */
+	if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+		mode |= F81604_TX_ONESHOT;
+	else
+		mode |= F81604_TX_NORMAL;
+
+	ret = f81604_sja1000_write(priv, F81604_CTRL_MODE_REG, mode);
+	if (ret)
+		return ret;
+
+	/* set reset mode */
+	ret = f81604_set_reset_mode(priv);
+	if (ret)
+		return ret;
+
+	ret = f81604_chipset_init(priv);
+	if (ret)
+		return ret;
+
+	/* Clear error counters and error code capture */
+	ret = f81604_sja1000_write(priv, F81604_SJA1000_TXERR, 0);
+	if (ret)
+		return ret;
+
+	ret = f81604_sja1000_write(priv, F81604_SJA1000_RXERR, 0);
+	if (ret)
+		return ret;
+
+	/* Read clear for ECC/ALC/IR register */
+	ret = f81604_sja1000_read(priv, F81604_SJA1000_ECC, &tmp);
+	if (ret)
+		return ret;
+
+	ret = f81604_sja1000_read(priv, F81604_SJA1000_ALC, &tmp);
+	if (ret)
+		return ret;
+
+	ret = f81604_sja1000_read(priv, F81604_SJA1000_IR, &tmp);
+	if (ret)
+		return ret;
+
+	ret = f81604_register_urbs(priv);
+	if (ret)
+		return ret;
+
+	ret = f81604_set_normal_mode(priv);
+	if (ret) {
+		f81604_unregister_urbs(priv);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int f81604_set_bittiming(struct net_device *dev)
+{
+	struct f81604_port_priv *priv = netdev_priv(dev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u8 btr0, btr1;
+	int ret;
+
+	btr0 = FIELD_PREP(F81604_BRP_MASK, bt->brp - 1) |
+	       FIELD_PREP(F81604_SJW_MASK, bt->sjw - 1);
+
+	btr1 = FIELD_PREP(F81604_SEG1_MASK,
+			  bt->prop_seg + bt->phase_seg1 - 1) |
+	       FIELD_PREP(F81604_SEG2_MASK, bt->phase_seg2 - 1);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		btr1 |= F81604_SJA1000_BTR1_SAMPLE_TRIPLE;
+
+	ret = f81604_sja1000_write(priv, F81604_SJA1000_BTR0, btr0);
+	if (ret) {
+		netdev_warn(dev, "%s: Set BTR0 failed: %pe\n", __func__,
+			    ERR_PTR(ret));
+		return ret;
+	}
+
+	ret = f81604_sja1000_write(priv, F81604_SJA1000_BTR1, btr1);
+	if (ret) {
+		netdev_warn(dev, "%s: Set BTR1 failed: %pe\n", __func__,
+			    ERR_PTR(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+static int f81604_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+	int ret;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		ret = f81604_start(netdev);
+		if (!ret && netif_queue_stopped(netdev))
+			netif_wake_queue(netdev);
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+	}
+
+	return ret;
+}
+
+static void f81604_write_bulk_callback(struct urb *urb)
+{
+	struct net_device *netdev = urb->context;
+
+	if (!netif_device_present(netdev))
+		return;
+
+	if (urb->status)
+		netdev_info(netdev, "%s: Tx URB error: %pe\n", __func__,
+			    ERR_PTR(urb->status));
+}
+
+static void f81604_clear_reg_work(struct work_struct *work)
+{
+	struct f81604_port_priv *priv;
+	u8 tmp;
+
+	priv = container_of(work, struct f81604_port_priv, clear_reg_work);
+
+	/* dummy read for clear Arbitration lost capture(ALC) register. */
+	if (test_and_clear_bit(F81604_CLEAR_ALC, &priv->clear_flags))
+		f81604_sja1000_read(priv, F81604_SJA1000_ALC, &tmp);
+
+	/* dummy read for clear Error code capture(ECC) register. */
+	if (test_and_clear_bit(F81604_CLEAR_ECC, &priv->clear_flags))
+		f81604_sja1000_read(priv, F81604_SJA1000_ECC, &tmp);
+
+	/* dummy write for clear data overrun flag. */
+	if (test_and_clear_bit(F81604_CLEAR_OVERRUN, &priv->clear_flags))
+		f81604_sja1000_write(priv, F81604_SJA1000_CMR,
+				     F81604_SJA1000_CMD_CDO);
+}
+
+static netdev_tx_t f81604_start_xmit(struct sk_buff *skb,
+				     struct net_device *netdev)
+{
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	struct f81604_port_priv *priv = netdev_priv(netdev);
+	struct net_device_stats *stats = &netdev->stats;
+	struct f81604_can_frame *frame;
+	struct urb *write_urb;
+	int ret;
+
+	if (can_dev_dropped_skb(netdev, skb))
+		return NETDEV_TX_OK;
+
+	netif_stop_queue(netdev);
+
+	write_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!write_urb)
+		goto nomem_urb;
+
+	frame = kzalloc(sizeof(*frame), GFP_ATOMIC);
+	if (!frame)
+		goto nomem_buf;
+
+	usb_fill_bulk_urb(write_urb, priv->dev,
+			  usb_sndbulkpipe(priv->dev,
+					  bulk_out_addr[netdev->dev_port]),
+			  frame, sizeof(*frame), f81604_write_bulk_callback,
+			  priv->netdev);
+
+	write_urb->transfer_flags |= URB_FREE_BUFFER;
+
+	frame->cmd = F81604_CMD_DATA;
+	frame->dlc = cf->len;
+
+	if (cf->can_id & CAN_RTR_FLAG)
+		frame->dlc |= F81604_DLC_RTR_BIT;
+
+	if (cf->can_id & CAN_EFF_FLAG) {
+		u32 id = (cf->can_id & CAN_EFF_MASK) << F81604_EFF_SHIFT;
+
+		put_unaligned_be32(id, &frame->eff.id);
+
+		frame->dlc |= F81604_DLC_EFF_BIT;
+
+		if (!(cf->can_id & CAN_RTR_FLAG))
+			memcpy(&frame->eff.data, cf->data, cf->len);
+	} else {
+		u32 id = (cf->can_id & CAN_SFF_MASK) << F81604_SFF_SHIFT;
+
+		put_unaligned_be16(id, &frame->sff.id);
+
+		if (!(cf->can_id & CAN_RTR_FLAG))
+			memcpy(&frame->sff.data, cf->data, cf->len);
+	}
+
+	can_put_echo_skb(skb, netdev, 0, 0);
+
+	ret = usb_submit_urb(write_urb, GFP_ATOMIC);
+	if (ret) {
+		netdev_err(netdev, "%s: failed to resubmit tx bulk urb: %pe\n",
+			   __func__, ERR_PTR(ret));
+
+		can_free_echo_skb(netdev, 0, NULL);
+		stats->tx_dropped++;
+		stats->tx_errors++;
+
+		if (ret == -ENODEV)
+			netif_device_detach(netdev);
+		else
+			netif_wake_queue(netdev);
+	}
+
+	/* let usb core take care of this urb */
+	usb_free_urb(write_urb);
+
+	return NETDEV_TX_OK;
+
+nomem_buf:
+	usb_free_urb(write_urb);
+
+nomem_urb:
+	dev_kfree_skb(skb);
+	stats->tx_dropped++;
+	stats->tx_errors++;
+	netif_wake_queue(netdev);
+
+	return NETDEV_TX_OK;
+}
+
+static int f81604_get_berr_counter(const struct net_device *netdev,
+				   struct can_berr_counter *bec)
+{
+	struct f81604_port_priv *priv = netdev_priv(netdev);
+	u8 txerr, rxerr;
+	int ret;
+
+	ret = f81604_sja1000_read(priv, F81604_SJA1000_TXERR, &txerr);
+	if (ret)
+		return ret;
+
+	ret = f81604_sja1000_read(priv, F81604_SJA1000_RXERR, &rxerr);
+	if (ret)
+		return ret;
+
+	bec->txerr = txerr;
+	bec->rxerr = rxerr;
+
+	return 0;
+}
+
+/* Open USB device */
+static int f81604_open(struct net_device *netdev)
+{
+	int ret;
+
+	ret = open_candev(netdev);
+	if (ret)
+		return ret;
+
+	ret = f81604_start(netdev);
+	if (ret) {
+		if (ret == -ENODEV)
+			netif_device_detach(netdev);
+
+		close_candev(netdev);
+		return ret;
+	}
+
+	netif_start_queue(netdev);
+	return 0;
+}
+
+/* Close USB device */
+static int f81604_close(struct net_device *netdev)
+{
+	struct f81604_port_priv *priv = netdev_priv(netdev);
+
+	f81604_set_reset_mode(priv);
+
+	netif_stop_queue(netdev);
+	cancel_work_sync(&priv->clear_reg_work);
+	close_candev(netdev);
+
+	f81604_unregister_urbs(priv);
+
+	return 0;
+}
+
+static const struct net_device_ops f81604_netdev_ops = {
+	.ndo_open = f81604_open,
+	.ndo_stop = f81604_close,
+	.ndo_start_xmit = f81604_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
+};
+
+static const struct can_bittiming_const f81604_bittiming_const = {
+	.name = KBUILD_MODNAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 64,
+	.brp_inc = 1,
+};
+
+/* Called by the usb core when driver is unloaded or device is removed */
+static void f81604_disconnect(struct usb_interface *intf)
+{
+	struct f81604_priv *priv = usb_get_intfdata(intf);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(priv->netdev); ++i) {
+		if (!priv->netdev[i])
+			continue;
+
+		unregister_netdev(priv->netdev[i]);
+		free_candev(priv->netdev[i]);
+	}
+}
+
+static int __f81604_set_termination(struct usb_device *dev, int idx, u16 term)
+{
+	u8 mask, data = 0;
+
+	if (idx == 0)
+		mask = F81604_CAN0_TERM;
+	else
+		mask = F81604_CAN1_TERM;
+
+	if (term)
+		data = mask;
+
+	return f81604_update_bits(dev, F81604_TERMINATOR_REG, mask, data);
+}
+
+static int f81604_set_termination(struct net_device *netdev, u16 term)
+{
+	struct f81604_port_priv *port_priv = netdev_priv(netdev);
+
+	ASSERT_RTNL();
+
+	return __f81604_set_termination(port_priv->dev, netdev->dev_port,
+					term);
+}
+
+static int f81604_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct net_device *netdev;
+	struct f81604_priv *priv;
+	int i, ret;
+
+	priv = devm_kzalloc(&intf->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	usb_set_intfdata(intf, priv);
+
+	for (i = 0; i < ARRAY_SIZE(priv->netdev); ++i) {
+		ret = __f81604_set_termination(dev, i, 0);
+		if (ret) {
+			dev_err(&intf->dev,
+				"Setting termination of CH#%d failed: %pe\n",
+				i, ERR_PTR(ret));
+			return ret;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(priv->netdev); ++i) {
+		struct f81604_port_priv *port_priv;
+
+		netdev = alloc_candev(sizeof(*port_priv), 1);
+		if (!netdev) {
+			dev_err(&intf->dev, "Couldn't alloc candev: %d\n", i);
+			ret = -ENOMEM;
+
+			goto failure_cleanup;
+		}
+
+		port_priv = netdev_priv(netdev);
+
+		INIT_WORK(&port_priv->clear_reg_work, f81604_clear_reg_work);
+		init_usb_anchor(&port_priv->urbs_anchor);
+
+		port_priv->intf = intf;
+		port_priv->dev = dev;
+		port_priv->netdev = netdev;
+		port_priv->can.clock.freq = F81604_CAN_CLOCK;
+
+		port_priv->can.termination_const = f81604_termination;
+		port_priv->can.termination_const_cnt =
+			ARRAY_SIZE(f81604_termination);
+		port_priv->can.bittiming_const = &f81604_bittiming_const;
+		port_priv->can.do_set_bittiming = f81604_set_bittiming;
+		port_priv->can.do_set_mode = f81604_set_mode;
+		port_priv->can.do_set_termination = f81604_set_termination;
+		port_priv->can.do_get_berr_counter = f81604_get_berr_counter;
+		port_priv->can.ctrlmode_supported =
+			CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_3_SAMPLES |
+			CAN_CTRLMODE_ONE_SHOT | CAN_CTRLMODE_BERR_REPORTING |
+			CAN_CTRLMODE_PRESUME_ACK;
+
+		netdev->ethtool_ops = &f81604_ethtool_ops;
+		netdev->netdev_ops = &f81604_netdev_ops;
+		netdev->flags |= IFF_ECHO;
+		netdev->dev_port = i;
+
+		SET_NETDEV_DEV(netdev, &intf->dev);
+
+		ret = register_candev(netdev);
+		if (ret) {
+			netdev_err(netdev, "register CAN device failed: %pe\n",
+				   ERR_PTR(ret));
+			free_candev(netdev);
+
+			goto failure_cleanup;
+		}
+
+		priv->netdev[i] = netdev;
+	}
+
+	return 0;
+
+failure_cleanup:
+	f81604_disconnect(intf);
+	return ret;
+}
+
+static struct usb_driver f81604_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = f81604_probe,
+	.disconnect = f81604_disconnect,
+	.id_table = f81604_table,
+};
+
+module_usb_driver(f81604_driver);
+
+MODULE_AUTHOR("Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>");
+MODULE_DESCRIPTION("Fintek F81604 USB to 2xCANBUS");
+MODULE_LICENSE("GPL");