Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 153 insertions, 0 deletions

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
new file mode 100644
index 0000000000..f8c1d73b25
--- /dev/null
+++ b/drivers/net/dsa/Kconfig
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Distributed Switch Architecture drivers"
+	depends on NET_DSA
+
+source "drivers/net/dsa/b53/Kconfig"
+
+config NET_DSA_BCM_SF2
+	tristate "Broadcom Starfighter 2 Ethernet switch support"
+	depends on HAS_IOMEM
+	select NET_DSA_TAG_BRCM
+	select FIXED_PHY
+	select BCM7XXX_PHY
+	select MDIO_BCM_UNIMAC
+	select B53
+	help
+	  This enables support for the Broadcom Starfighter 2 Ethernet
+	  switch chips.
+
+config NET_DSA_LOOP
+	tristate "DSA mock-up Ethernet switch chip support"
+	select NET_DSA_TAG_NONE
+	select FIXED_PHY
+	help
+	  This enables support for a fake mock-up switch chip which
+	  exercises the DSA APIs.
+
+source "drivers/net/dsa/hirschmann/Kconfig"
+
+config NET_DSA_LANTIQ_GSWIP
+	tristate "Lantiq / Intel GSWIP"
+	depends on HAS_IOMEM
+	select NET_DSA_TAG_GSWIP
+	help
+	  This enables support for the Lantiq / Intel GSWIP 2.1 found in
+	  the xrx200 / VR9 SoC.
+
+config NET_DSA_MT7530
+	tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
+	select NET_DSA_TAG_MTK
+	imply NET_DSA_MT7530_MDIO
+	imply NET_DSA_MT7530_MMIO
+	help
+	  This enables support for the MediaTek MT7530 and MT7531 Ethernet
+	  switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
+	  MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
+	  supported as well.
+
+config NET_DSA_MT7530_MDIO
+	tristate "MediaTek MT7530 MDIO interface driver"
+	depends on NET_DSA_MT7530
+	imply MEDIATEK_GE_PHY
+	select PCS_MTK_LYNXI
+	help
+	  This enables support for the MediaTek MT7530 and MT7531 switch
+	  chips which are connected via MDIO, as well as multi-chip
+	  module MT7530 which can be found in the MT7621AT, MT7621DAT,
+	  MT7621ST and MT7623AI SoCs.
+
+config NET_DSA_MT7530_MMIO
+	tristate "MediaTek MT7530 MMIO interface driver"
+	depends on NET_DSA_MT7530
+	depends on HAS_IOMEM
+	imply MEDIATEK_GE_SOC_PHY
+	help
+	  This enables support for the built-in Ethernet switch found
+	  in the MediaTek MT7988 SoC.
+	  The switch is a similar design as MT7531, but the switch registers
+	  are directly mapped into the SoCs register space rather than being
+	  accessible via MDIO.
+
+config NET_DSA_MV88E6060
+	tristate "Marvell 88E6060 ethernet switch chip support"
+	select NET_DSA_TAG_TRAILER
+	help
+	  This enables support for the Marvell 88E6060 ethernet switch
+	  chip.
+
+source "drivers/net/dsa/microchip/Kconfig"
+
+source "drivers/net/dsa/mv88e6xxx/Kconfig"
+
+source "drivers/net/dsa/ocelot/Kconfig"
+
+source "drivers/net/dsa/qca/Kconfig"
+
+source "drivers/net/dsa/sja1105/Kconfig"
+
+source "drivers/net/dsa/xrs700x/Kconfig"
+
+source "drivers/net/dsa/realtek/Kconfig"
+
+config NET_DSA_RZN1_A5PSW
+	tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
+	depends on OF && ARCH_RZN1
+	select NET_DSA_TAG_RZN1_A5PSW
+	select PCS_RZN1_MIIC
+	help
+	  This driver supports the A5PSW switch, which is embedded in Renesas
+	  RZ/N1 SoC.
+
+config NET_DSA_SMSC_LAN9303
+	tristate
+	select NET_DSA_TAG_LAN9303
+	select REGMAP
+	help
+	  This enables support for the Microchip LAN9303/LAN9354 3 port ethernet
+	  switch chips.
+
+config NET_DSA_SMSC_LAN9303_I2C
+	tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
+	depends on I2C
+	depends on VLAN_8021Q || VLAN_8021Q=n
+	select NET_DSA_SMSC_LAN9303
+	select REGMAP_I2C
+	help
+	  Enable access functions if the SMSC/Microchip LAN9303 is configured
+	  for I2C managed mode.
+
+config NET_DSA_SMSC_LAN9303_MDIO
+	tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode"
+	select NET_DSA_SMSC_LAN9303
+	depends on VLAN_8021Q || VLAN_8021Q=n
+	help
+	  Enable access functions if the Microchip LAN9303/LAN9354 is configured
+	  for MDIO managed mode.
+
+config NET_DSA_VITESSE_VSC73XX
+	tristate
+	select NET_DSA_TAG_NONE
+	select FIXED_PHY
+	select VITESSE_PHY
+	select GPIOLIB
+	help
+	  This enables support for the Vitesse VSC7385, VSC7388,
+	  VSC7395 and VSC7398 SparX integrated ethernet switches.
+
+config NET_DSA_VITESSE_VSC73XX_SPI
+	tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
+	depends on SPI
+	select NET_DSA_VITESSE_VSC73XX
+	help
+	  This enables support for the Vitesse VSC7385, VSC7388, VSC7395
+	  and VSC7398 SparX integrated ethernet switches in SPI managed mode.
+
+config NET_DSA_VITESSE_VSC73XX_PLATFORM
+	tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
+	depends on HAS_IOMEM
+	select NET_DSA_VITESSE_VSC73XX
+	help
+	  This enables support for the Vitesse VSC7385, VSC7388, VSC7395
+	  and VSC7398 SparX integrated ethernet switches, connected over
+	  a CPU-attached address bus and work in memory-mapped I/O mode.
+endmenu