summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/lantiq_gswip.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/dsa/lantiq_gswip.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/dsa/lantiq_gswip.c')
-rw-r--r--drivers/net/dsa/lantiq_gswip.c2287
1 files changed, 2287 insertions, 0 deletions
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
new file mode 100644
index 0000000000..3c76a1a14a
--- /dev/null
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -0,0 +1,2287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs
+ *
+ * Copyright (C) 2010 Lantiq Deutschland
+ * Copyright (C) 2012 John Crispin <john@phrozen.org>
+ * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * The VLAN and bridge model the GSWIP hardware uses does not directly
+ * matches the model DSA uses.
+ *
+ * The hardware has 64 possible table entries for bridges with one VLAN
+ * ID, one flow id and a list of ports for each bridge. All entries which
+ * match the same flow ID are combined in the mac learning table, they
+ * act as one global bridge.
+ * The hardware does not support VLAN filter on the port, but on the
+ * bridge, this driver converts the DSA model to the hardware.
+ *
+ * The CPU gets all the exception frames which do not match any forwarding
+ * rule and the CPU port is also added to all bridges. This makes it possible
+ * to handle all the special cases easily in software.
+ * At the initialization the driver allocates one bridge table entry for
+ * each switch port which is used when the port is used without an
+ * explicit bridge. This prevents the frames from being forwarded
+ * between all LAN ports by default.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/firmware.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <net/dsa.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+#include "lantiq_pce.h"
+
+/* GSWIP MDIO Registers */
+#define GSWIP_MDIO_GLOB 0x00
+#define GSWIP_MDIO_GLOB_ENABLE BIT(15)
+#define GSWIP_MDIO_CTRL 0x08
+#define GSWIP_MDIO_CTRL_BUSY BIT(12)
+#define GSWIP_MDIO_CTRL_RD BIT(11)
+#define GSWIP_MDIO_CTRL_WR BIT(10)
+#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f
+#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5
+#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f
+#define GSWIP_MDIO_READ 0x09
+#define GSWIP_MDIO_WRITE 0x0A
+#define GSWIP_MDIO_MDC_CFG0 0x0B
+#define GSWIP_MDIO_MDC_CFG1 0x0C
+#define GSWIP_MDIO_PHYp(p) (0x15 - (p))
+#define GSWIP_MDIO_PHY_LINK_MASK 0x6000
+#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000
+#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000
+#define GSWIP_MDIO_PHY_LINK_UP 0x2000
+#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800
+#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800
+#define GSWIP_MDIO_PHY_SPEED_M10 0x0000
+#define GSWIP_MDIO_PHY_SPEED_M100 0x0800
+#define GSWIP_MDIO_PHY_SPEED_G1 0x1000
+#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600
+#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FDUP_EN 0x0200
+#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600
+#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180
+#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100
+#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180
+#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060
+#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020
+#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060
+#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f
+#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \
+ GSWIP_MDIO_PHY_FCONRX_MASK | \
+ GSWIP_MDIO_PHY_FCONTX_MASK | \
+ GSWIP_MDIO_PHY_LINK_MASK | \
+ GSWIP_MDIO_PHY_SPEED_MASK | \
+ GSWIP_MDIO_PHY_FDUP_MASK)
+
+/* GSWIP MII Registers */
+#define GSWIP_MII_CFGp(p) (0x2 * (p))
+#define GSWIP_MII_CFG_RESET BIT(15)
+#define GSWIP_MII_CFG_EN BIT(14)
+#define GSWIP_MII_CFG_ISOLATE BIT(13)
+#define GSWIP_MII_CFG_LDCLKDIS BIT(12)
+#define GSWIP_MII_CFG_RGMII_IBS BIT(8)
+#define GSWIP_MII_CFG_RMII_CLK BIT(7)
+#define GSWIP_MII_CFG_MODE_MIIP 0x0
+#define GSWIP_MII_CFG_MODE_MIIM 0x1
+#define GSWIP_MII_CFG_MODE_RMIIP 0x2
+#define GSWIP_MII_CFG_MODE_RMIIM 0x3
+#define GSWIP_MII_CFG_MODE_RGMII 0x4
+#define GSWIP_MII_CFG_MODE_GMII 0x9
+#define GSWIP_MII_CFG_MODE_MASK 0xf
+#define GSWIP_MII_CFG_RATE_M2P5 0x00
+#define GSWIP_MII_CFG_RATE_M25 0x10
+#define GSWIP_MII_CFG_RATE_M125 0x20
+#define GSWIP_MII_CFG_RATE_M50 0x30
+#define GSWIP_MII_CFG_RATE_AUTO 0x40
+#define GSWIP_MII_CFG_RATE_MASK 0x70
+#define GSWIP_MII_PCDU0 0x01
+#define GSWIP_MII_PCDU1 0x03
+#define GSWIP_MII_PCDU5 0x05
+#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0)
+#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7)
+
+/* GSWIP Core Registers */
+#define GSWIP_SWRES 0x000
+#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */
+#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */
+#define GSWIP_VERSION 0x013
+#define GSWIP_VERSION_REV_SHIFT 0
+#define GSWIP_VERSION_REV_MASK GENMASK(7, 0)
+#define GSWIP_VERSION_MOD_SHIFT 8
+#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8)
+#define GSWIP_VERSION_2_0 0x100
+#define GSWIP_VERSION_2_1 0x021
+#define GSWIP_VERSION_2_2 0x122
+#define GSWIP_VERSION_2_2_ETC 0x022
+
+#define GSWIP_BM_RAM_VAL(x) (0x043 - (x))
+#define GSWIP_BM_RAM_ADDR 0x044
+#define GSWIP_BM_RAM_CTRL 0x045
+#define GSWIP_BM_RAM_CTRL_BAS BIT(15)
+#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5)
+#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0)
+#define GSWIP_BM_QUEUE_GCTRL 0x04A
+#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10)
+/* buffer management Port Configuration Register */
+#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2))
+#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */
+#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */
+/* buffer management Port Control Register */
+#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2))
+#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */
+#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */
+
+/* PCE */
+#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x))
+#define GSWIP_PCE_TBL_MASK 0x448
+#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x))
+#define GSWIP_PCE_TBL_ADDR 0x44E
+#define GSWIP_PCE_TBL_CTRL 0x44F
+#define GSWIP_PCE_TBL_CTRL_BAS BIT(15)
+#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13)
+#define GSWIP_PCE_TBL_CTRL_VLD BIT(12)
+#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11)
+#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7)
+#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5)
+#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00
+#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20
+#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40
+#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60
+#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0)
+#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */
+#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */
+#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */
+#define GSWIP_PCE_GCTRL_0 0x456
+#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */
+#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3)
+#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */
+#define GSWIP_PCE_GCTRL_1 0x457
+#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */
+#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */
+#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA))
+#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */
+#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */
+#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */
+#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0
+#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1
+#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2
+#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3
+#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7
+#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0)
+#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA))
+#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */
+#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */
+#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */
+#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */
+#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */
+#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA))
+
+#define GSWIP_MAC_FLEN 0x8C5
+#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC))
+#define GSWIP_MAC_CTRL_0_PADEN BIT(8)
+#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7)
+#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070
+#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010
+#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020
+#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030
+#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040
+#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C
+#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004
+#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C
+#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003
+#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001
+#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002
+#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC))
+#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */
+#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */
+
+/* Ethernet Switch Fetch DMA Port Control Register */
+#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6))
+#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */
+#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */
+#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */
+#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */
+#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+
+/* Ethernet Switch Store DMA Port Control Register */
+#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6))
+#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */
+#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */
+#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */
+
+#define GSWIP_TABLE_ACTIVE_VLAN 0x01
+#define GSWIP_TABLE_VLAN_MAPPING 0x02
+#define GSWIP_TABLE_MAC_BRIDGE 0x0b
+#define GSWIP_TABLE_MAC_BRIDGE_STATIC 0x01 /* Static not, aging entry */
+
+#define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+/* Maximum packet size supported by the switch. In theory this should be 10240,
+ * but long packets currently cause lock-ups with an MTU of over 2526. Medium
+ * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP
+ * over 2526), hence an MTU value of 2400 seems safe. This issue only affects
+ * packet reception. This is probably caused by the PPA engine, which is on the
+ * RX part of the device. Packet transmission works properly up to 10240.
+ */
+#define GSWIP_MAX_PACKET_LENGTH 2400
+
+struct gswip_hw_info {
+ int max_ports;
+ int cpu_port;
+ const struct dsa_switch_ops *ops;
+};
+
+struct xway_gphy_match_data {
+ char *fe_firmware_name;
+ char *ge_firmware_name;
+};
+
+struct gswip_gphy_fw {
+ struct clk *clk_gate;
+ struct reset_control *reset;
+ u32 fw_addr_offset;
+ char *fw_name;
+};
+
+struct gswip_vlan {
+ struct net_device *bridge;
+ u16 vid;
+ u8 fid;
+};
+
+struct gswip_priv {
+ __iomem void *gswip;
+ __iomem void *mdio;
+ __iomem void *mii;
+ const struct gswip_hw_info *hw_info;
+ const struct xway_gphy_match_data *gphy_fw_name_cfg;
+ struct dsa_switch *ds;
+ struct device *dev;
+ struct regmap *rcu_regmap;
+ struct gswip_vlan vlans[64];
+ int num_gphy_fw;
+ struct gswip_gphy_fw *gphy_fw;
+ u32 port_vlan_filter;
+ struct mutex pce_table_lock;
+};
+
+struct gswip_pce_table_entry {
+ u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index
+ u16 table; // PCE_TBL_CTRL.ADDR = pData->table
+ u16 key[8];
+ u16 val[5];
+ u16 mask;
+ u8 gmap;
+ bool type;
+ bool valid;
+ bool key_mode;
+};
+
+struct gswip_rmon_cnt_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name}
+
+static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = {
+ /** Receive Packet Count (only packets that are accepted and not discarded). */
+ MIB_DESC(1, 0x1F, "RxGoodPkts"),
+ MIB_DESC(1, 0x23, "RxUnicastPkts"),
+ MIB_DESC(1, 0x22, "RxMulticastPkts"),
+ MIB_DESC(1, 0x21, "RxFCSErrorPkts"),
+ MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"),
+ MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"),
+ MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"),
+ MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"),
+ MIB_DESC(1, 0x20, "RxGoodPausePkts"),
+ MIB_DESC(1, 0x1A, "RxAlignErrorPkts"),
+ MIB_DESC(1, 0x12, "Rx64BytePkts"),
+ MIB_DESC(1, 0x13, "Rx127BytePkts"),
+ MIB_DESC(1, 0x14, "Rx255BytePkts"),
+ MIB_DESC(1, 0x15, "Rx511BytePkts"),
+ MIB_DESC(1, 0x16, "Rx1023BytePkts"),
+ /** Receive Size 1024-1522 (or more, if configured) Packet Count. */
+ MIB_DESC(1, 0x17, "RxMaxBytePkts"),
+ MIB_DESC(1, 0x18, "RxDroppedPkts"),
+ MIB_DESC(1, 0x19, "RxFilteredPkts"),
+ MIB_DESC(2, 0x24, "RxGoodBytes"),
+ MIB_DESC(2, 0x26, "RxBadBytes"),
+ MIB_DESC(1, 0x11, "TxAcmDroppedPkts"),
+ MIB_DESC(1, 0x0C, "TxGoodPkts"),
+ MIB_DESC(1, 0x06, "TxUnicastPkts"),
+ MIB_DESC(1, 0x07, "TxMulticastPkts"),
+ MIB_DESC(1, 0x00, "Tx64BytePkts"),
+ MIB_DESC(1, 0x01, "Tx127BytePkts"),
+ MIB_DESC(1, 0x02, "Tx255BytePkts"),
+ MIB_DESC(1, 0x03, "Tx511BytePkts"),
+ MIB_DESC(1, 0x04, "Tx1023BytePkts"),
+ /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */
+ MIB_DESC(1, 0x05, "TxMaxBytePkts"),
+ MIB_DESC(1, 0x08, "TxSingleCollCount"),
+ MIB_DESC(1, 0x09, "TxMultCollCount"),
+ MIB_DESC(1, 0x0A, "TxLateCollCount"),
+ MIB_DESC(1, 0x0B, "TxExcessCollCount"),
+ MIB_DESC(1, 0x0D, "TxPauseCount"),
+ MIB_DESC(1, 0x10, "TxDroppedPkts"),
+ MIB_DESC(2, 0x0E, "TxGoodBytes"),
+};
+
+static u32 gswip_switch_r(struct gswip_priv *priv, u32 offset)
+{
+ return __raw_readl(priv->gswip + (offset * 4));
+}
+
+static void gswip_switch_w(struct gswip_priv *priv, u32 val, u32 offset)
+{
+ __raw_writel(val, priv->gswip + (offset * 4));
+}
+
+static void gswip_switch_mask(struct gswip_priv *priv, u32 clear, u32 set,
+ u32 offset)
+{
+ u32 val = gswip_switch_r(priv, offset);
+
+ val &= ~(clear);
+ val |= set;
+ gswip_switch_w(priv, val, offset);
+}
+
+static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset,
+ u32 cleared)
+{
+ u32 val;
+
+ return readx_poll_timeout(__raw_readl, priv->gswip + (offset * 4), val,
+ (val & cleared) == 0, 20, 50000);
+}
+
+static u32 gswip_mdio_r(struct gswip_priv *priv, u32 offset)
+{
+ return __raw_readl(priv->mdio + (offset * 4));
+}
+
+static void gswip_mdio_w(struct gswip_priv *priv, u32 val, u32 offset)
+{
+ __raw_writel(val, priv->mdio + (offset * 4));
+}
+
+static void gswip_mdio_mask(struct gswip_priv *priv, u32 clear, u32 set,
+ u32 offset)
+{
+ u32 val = gswip_mdio_r(priv, offset);
+
+ val &= ~(clear);
+ val |= set;
+ gswip_mdio_w(priv, val, offset);
+}
+
+static u32 gswip_mii_r(struct gswip_priv *priv, u32 offset)
+{
+ return __raw_readl(priv->mii + (offset * 4));
+}
+
+static void gswip_mii_w(struct gswip_priv *priv, u32 val, u32 offset)
+{
+ __raw_writel(val, priv->mii + (offset * 4));
+}
+
+static void gswip_mii_mask(struct gswip_priv *priv, u32 clear, u32 set,
+ u32 offset)
+{
+ u32 val = gswip_mii_r(priv, offset);
+
+ val &= ~(clear);
+ val |= set;
+ gswip_mii_w(priv, val, offset);
+}
+
+static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 clear, u32 set,
+ int port)
+{
+ /* There's no MII_CFG register for the CPU port */
+ if (!dsa_is_cpu_port(priv->ds, port))
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_CFGp(port));
+}
+
+static void gswip_mii_mask_pcdu(struct gswip_priv *priv, u32 clear, u32 set,
+ int port)
+{
+ switch (port) {
+ case 0:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU0);
+ break;
+ case 1:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU1);
+ break;
+ case 5:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU5);
+ break;
+ }
+}
+
+static int gswip_mdio_poll(struct gswip_priv *priv)
+{
+ int cnt = 100;
+
+ while (likely(cnt--)) {
+ u32 ctrl = gswip_mdio_r(priv, GSWIP_MDIO_CTRL);
+
+ if ((ctrl & GSWIP_MDIO_CTRL_BUSY) == 0)
+ return 0;
+ usleep_range(20, 40);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+ struct gswip_priv *priv = bus->priv;
+ int err;
+
+ err = gswip_mdio_poll(priv);
+ if (err) {
+ dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n");
+ return err;
+ }
+
+ gswip_mdio_w(priv, val, GSWIP_MDIO_WRITE);
+ gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR |
+ ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) |
+ (reg & GSWIP_MDIO_CTRL_REGAD_MASK),
+ GSWIP_MDIO_CTRL);
+
+ return 0;
+}
+
+static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg)
+{
+ struct gswip_priv *priv = bus->priv;
+ int err;
+
+ err = gswip_mdio_poll(priv);
+ if (err) {
+ dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n");
+ return err;
+ }
+
+ gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD |
+ ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) |
+ (reg & GSWIP_MDIO_CTRL_REGAD_MASK),
+ GSWIP_MDIO_CTRL);
+
+ err = gswip_mdio_poll(priv);
+ if (err) {
+ dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n");
+ return err;
+ }
+
+ return gswip_mdio_r(priv, GSWIP_MDIO_READ);
+}
+
+static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
+{
+ struct dsa_switch *ds = priv->ds;
+ int err;
+
+ ds->slave_mii_bus = mdiobus_alloc();
+ if (!ds->slave_mii_bus)
+ return -ENOMEM;
+
+ ds->slave_mii_bus->priv = priv;
+ ds->slave_mii_bus->read = gswip_mdio_rd;
+ ds->slave_mii_bus->write = gswip_mdio_wr;
+ ds->slave_mii_bus->name = "lantiq,xrx200-mdio";
+ snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s-mii",
+ dev_name(priv->dev));
+ ds->slave_mii_bus->parent = priv->dev;
+ ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
+
+ err = of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+ if (err)
+ mdiobus_free(ds->slave_mii_bus);
+
+ return err;
+}
+
+static int gswip_pce_table_entry_read(struct gswip_priv *priv,
+ struct gswip_pce_table_entry *tbl)
+{
+ int i;
+ int err;
+ u16 crtl;
+ u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD :
+ GSWIP_PCE_TBL_CTRL_OPMOD_ADRD;
+
+ mutex_lock(&priv->pce_table_lock);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err) {
+ mutex_unlock(&priv->pce_table_lock);
+ return err;
+ }
+
+ gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR);
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS,
+ GSWIP_PCE_TBL_CTRL);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err) {
+ mutex_unlock(&priv->pce_table_lock);
+ return err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tbl->key); i++)
+ tbl->key[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_KEY(i));
+
+ for (i = 0; i < ARRAY_SIZE(tbl->val); i++)
+ tbl->val[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_VAL(i));
+
+ tbl->mask = gswip_switch_r(priv, GSWIP_PCE_TBL_MASK);
+
+ crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL);
+
+ tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE);
+ tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD);
+ tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7;
+
+ mutex_unlock(&priv->pce_table_lock);
+
+ return 0;
+}
+
+static int gswip_pce_table_entry_write(struct gswip_priv *priv,
+ struct gswip_pce_table_entry *tbl)
+{
+ int i;
+ int err;
+ u16 crtl;
+ u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR :
+ GSWIP_PCE_TBL_CTRL_OPMOD_ADWR;
+
+ mutex_lock(&priv->pce_table_lock);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err) {
+ mutex_unlock(&priv->pce_table_lock);
+ return err;
+ }
+
+ gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR);
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ tbl->table | addr_mode,
+ GSWIP_PCE_TBL_CTRL);
+
+ for (i = 0; i < ARRAY_SIZE(tbl->key); i++)
+ gswip_switch_w(priv, tbl->key[i], GSWIP_PCE_TBL_KEY(i));
+
+ for (i = 0; i < ARRAY_SIZE(tbl->val); i++)
+ gswip_switch_w(priv, tbl->val[i], GSWIP_PCE_TBL_VAL(i));
+
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ tbl->table | addr_mode,
+ GSWIP_PCE_TBL_CTRL);
+
+ gswip_switch_w(priv, tbl->mask, GSWIP_PCE_TBL_MASK);
+
+ crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL);
+ crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD |
+ GSWIP_PCE_TBL_CTRL_GMAP_MASK);
+ if (tbl->type)
+ crtl |= GSWIP_PCE_TBL_CTRL_TYPE;
+ if (tbl->valid)
+ crtl |= GSWIP_PCE_TBL_CTRL_VLD;
+ crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK;
+ crtl |= GSWIP_PCE_TBL_CTRL_BAS;
+ gswip_switch_w(priv, crtl, GSWIP_PCE_TBL_CTRL);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+
+ mutex_unlock(&priv->pce_table_lock);
+
+ return err;
+}
+
+/* Add the LAN port into a bridge with the CPU port by
+ * default. This prevents automatic forwarding of
+ * packages between the LAN ports when no explicit
+ * bridge is configured.
+ */
+static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add)
+{
+ struct gswip_pce_table_entry vlan_active = {0,};
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int err;
+
+ if (port >= max_ports) {
+ dev_err(priv->dev, "single port for %i supported\n", port);
+ return -EIO;
+ }
+
+ vlan_active.index = port + 1;
+ vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
+ vlan_active.key[0] = 0; /* vid */
+ vlan_active.val[0] = port + 1 /* fid */;
+ vlan_active.valid = add;
+ err = gswip_pce_table_entry_write(priv, &vlan_active);
+ if (err) {
+ dev_err(priv->dev, "failed to write active VLAN: %d\n", err);
+ return err;
+ }
+
+ if (!add)
+ return 0;
+
+ vlan_mapping.index = port + 1;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ vlan_mapping.val[0] = 0 /* vid */;
+ vlan_mapping.val[1] = BIT(port) | BIT(cpu_port);
+ vlan_mapping.val[2] = 0;
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int gswip_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct gswip_priv *priv = ds->priv;
+ int err;
+
+ if (!dsa_is_user_port(ds, port))
+ return 0;
+
+ if (!dsa_is_cpu_port(ds, port)) {
+ err = gswip_add_single_port_br(priv, port, true);
+ if (err)
+ return err;
+ }
+
+ /* RMON Counter Enable for port */
+ gswip_switch_w(priv, GSWIP_BM_PCFG_CNTEN, GSWIP_BM_PCFGp(port));
+
+ /* enable port fetch/store dma & VLAN Modification */
+ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_EN |
+ GSWIP_FDMA_PCTRL_VLANMOD_BOTH,
+ GSWIP_FDMA_PCTRLp(port));
+ gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
+ GSWIP_SDMA_PCTRLp(port));
+
+ if (!dsa_is_cpu_port(ds, port)) {
+ u32 mdio_phy = 0;
+
+ if (phydev)
+ mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
+ }
+
+ return 0;
+}
+
+static void gswip_port_disable(struct dsa_switch *ds, int port)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ if (!dsa_is_user_port(ds, port))
+ return;
+
+ gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
+ GSWIP_FDMA_PCTRLp(port));
+ gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
+ GSWIP_SDMA_PCTRLp(port));
+}
+
+static int gswip_pce_load_microcode(struct gswip_priv *priv)
+{
+ int i;
+ int err;
+
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, GSWIP_PCE_TBL_CTRL);
+ gswip_switch_w(priv, 0, GSWIP_PCE_TBL_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(gswip_pce_microcode); i++) {
+ gswip_switch_w(priv, i, GSWIP_PCE_TBL_ADDR);
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_0,
+ GSWIP_PCE_TBL_VAL(0));
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_1,
+ GSWIP_PCE_TBL_VAL(1));
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_2,
+ GSWIP_PCE_TBL_VAL(2));
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_3,
+ GSWIP_PCE_TBL_VAL(3));
+
+ /* start the table access: */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_TBL_CTRL_BAS,
+ GSWIP_PCE_TBL_CTRL);
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err)
+ return err;
+ }
+
+ /* tell the switch that the microcode is loaded */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MC_VALID,
+ GSWIP_PCE_GCTRL_0);
+
+ return 0;
+}
+
+static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port));
+ struct gswip_priv *priv = ds->priv;
+
+ /* Do not allow changing the VLAN filtering options while in bridge */
+ if (bridge && !!(priv->port_vlan_filter & BIT(port)) != vlan_filtering) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Dynamic toggling of vlan_filtering not supported");
+ return -EIO;
+ }
+
+ if (vlan_filtering) {
+ /* Use port based VLAN tag */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_VSR,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+ GSWIP_PCE_VCTRL_VEMR,
+ GSWIP_PCE_VCTRL(port));
+ gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0,
+ GSWIP_PCE_PCTRL_0p(port));
+ } else {
+ /* Use port based VLAN tag */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+ GSWIP_PCE_VCTRL_VEMR,
+ GSWIP_PCE_VCTRL_VSR,
+ GSWIP_PCE_VCTRL(port));
+ gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_TVM,
+ GSWIP_PCE_PCTRL_0p(port));
+ }
+
+ return 0;
+}
+
+static int gswip_setup(struct dsa_switch *ds)
+{
+ struct gswip_priv *priv = ds->priv;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ int i;
+ int err;
+
+ gswip_switch_w(priv, GSWIP_SWRES_R0, GSWIP_SWRES);
+ usleep_range(5000, 10000);
+ gswip_switch_w(priv, 0, GSWIP_SWRES);
+
+ /* disable port fetch/store dma on all ports */
+ for (i = 0; i < priv->hw_info->max_ports; i++) {
+ gswip_port_disable(ds, i);
+ gswip_port_vlan_filtering(ds, i, false, NULL);
+ }
+
+ /* enable Switch */
+ gswip_mdio_mask(priv, 0, GSWIP_MDIO_GLOB_ENABLE, GSWIP_MDIO_GLOB);
+
+ err = gswip_pce_load_microcode(priv);
+ if (err) {
+ dev_err(priv->dev, "writing PCE microcode failed, %i", err);
+ return err;
+ }
+
+ /* Default unknown Broadcast/Multicast/Unicast port maps */
+ gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP1);
+ gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2);
+ gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3);
+
+ /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an
+ * interoperability problem with this auto polling mechanism because
+ * their status registers think that the link is in a different state
+ * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set
+ * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the
+ * auto polling state machine consider the link being negotiated with
+ * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads
+ * to the switch port being completely dead (RX and TX are both not
+ * working).
+ * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F
+ * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes
+ * it would work fine for a few minutes to hours and then stop, on
+ * other device it would no traffic could be sent or received at all.
+ * Testing shows that when PHY auto polling is disabled these problems
+ * go away.
+ */
+ gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0);
+
+ /* Configure the MDIO Clock 2.5 MHz */
+ gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
+
+ /* Disable the xMII interface and clear it's isolation bit */
+ for (i = 0; i < priv->hw_info->max_ports; i++)
+ gswip_mii_mask_cfg(priv,
+ GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE,
+ 0, i);
+
+ /* enable special tag insertion on cpu port */
+ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
+ GSWIP_FDMA_PCTRLp(cpu_port));
+
+ /* accept special tag in ingress direction */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
+ GSWIP_PCE_PCTRL_0p(cpu_port));
+
+ gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD,
+ GSWIP_BM_QUEUE_GCTRL);
+
+ /* VLAN aware Switching */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_VLAN, GSWIP_PCE_GCTRL_0);
+
+ /* Flush MAC Table */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MTFL, GSWIP_PCE_GCTRL_0);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0,
+ GSWIP_PCE_GCTRL_0_MTFL);
+ if (err) {
+ dev_err(priv->dev, "MAC flushing didn't finish\n");
+ return err;
+ }
+
+ ds->mtu_enforcement_ingress = true;
+
+ gswip_port_enable(ds, cpu_port, NULL);
+
+ ds->configure_vlan_while_not_filtering = false;
+
+ return 0;
+}
+
+static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds,
+ int port,
+ enum dsa_tag_protocol mp)
+{
+ return DSA_TAG_PROTO_GSWIP;
+}
+
+static int gswip_vlan_active_create(struct gswip_priv *priv,
+ struct net_device *bridge,
+ int fid, u16 vid)
+{
+ struct gswip_pce_table_entry vlan_active = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int idx = -1;
+ int err;
+ int i;
+
+ /* Look for a free slot */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (!priv->vlans[i].bridge) {
+ idx = i;
+ break;
+ }
+ }
+
+ if (idx == -1)
+ return -ENOSPC;
+
+ if (fid == -1)
+ fid = idx;
+
+ vlan_active.index = idx;
+ vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
+ vlan_active.key[0] = vid;
+ vlan_active.val[0] = fid;
+ vlan_active.valid = true;
+
+ err = gswip_pce_table_entry_write(priv, &vlan_active);
+ if (err) {
+ dev_err(priv->dev, "failed to write active VLAN: %d\n", err);
+ return err;
+ }
+
+ priv->vlans[idx].bridge = bridge;
+ priv->vlans[idx].vid = vid;
+ priv->vlans[idx].fid = fid;
+
+ return idx;
+}
+
+static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx)
+{
+ struct gswip_pce_table_entry vlan_active = {0,};
+ int err;
+
+ vlan_active.index = idx;
+ vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
+ vlan_active.valid = false;
+ err = gswip_pce_table_entry_write(priv, &vlan_active);
+ if (err)
+ dev_err(priv->dev, "failed to delete active VLAN: %d\n", err);
+ priv->vlans[idx].bridge = NULL;
+
+ return err;
+}
+
+static int gswip_vlan_add_unaware(struct gswip_priv *priv,
+ struct net_device *bridge, int port)
+{
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ bool active_vlan_created = false;
+ int idx = -1;
+ int i;
+ int err;
+
+ /* Check if there is already a page for this bridge */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge) {
+ idx = i;
+ break;
+ }
+ }
+
+ /* If this bridge is not programmed yet, add a Active VLAN table
+ * entry in a free slot and prepare the VLAN mapping table entry.
+ */
+ if (idx == -1) {
+ idx = gswip_vlan_active_create(priv, bridge, -1, 0);
+ if (idx < 0)
+ return idx;
+ active_vlan_created = true;
+
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ /* VLAN ID byte, maps to the VLAN ID of vlan active table */
+ vlan_mapping.val[0] = 0;
+ } else {
+ /* Read the existing VLAN mapping entry from the switch */
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ err = gswip_pce_table_entry_read(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to read VLAN mapping: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ /* Update the VLAN mapping entry and write it to the switch */
+ vlan_mapping.val[1] |= BIT(cpu_port);
+ vlan_mapping.val[1] |= BIT(port);
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ /* In case an Active VLAN was creaetd delete it again */
+ if (active_vlan_created)
+ gswip_vlan_active_remove(priv, idx);
+ return err;
+ }
+
+ gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port));
+ return 0;
+}
+
+static int gswip_vlan_add_aware(struct gswip_priv *priv,
+ struct net_device *bridge, int port,
+ u16 vid, bool untagged,
+ bool pvid)
+{
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ bool active_vlan_created = false;
+ int idx = -1;
+ int fid = -1;
+ int i;
+ int err;
+
+ /* Check if there is already a page for this bridge */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge) {
+ if (fid != -1 && fid != priv->vlans[i].fid)
+ dev_err(priv->dev, "one bridge with multiple flow ids\n");
+ fid = priv->vlans[i].fid;
+ if (priv->vlans[i].vid == vid) {
+ idx = i;
+ break;
+ }
+ }
+ }
+
+ /* If this bridge is not programmed yet, add a Active VLAN table
+ * entry in a free slot and prepare the VLAN mapping table entry.
+ */
+ if (idx == -1) {
+ idx = gswip_vlan_active_create(priv, bridge, fid, vid);
+ if (idx < 0)
+ return idx;
+ active_vlan_created = true;
+
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ /* VLAN ID byte, maps to the VLAN ID of vlan active table */
+ vlan_mapping.val[0] = vid;
+ } else {
+ /* Read the existing VLAN mapping entry from the switch */
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ err = gswip_pce_table_entry_read(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to read VLAN mapping: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ vlan_mapping.val[0] = vid;
+ /* Update the VLAN mapping entry and write it to the switch */
+ vlan_mapping.val[1] |= BIT(cpu_port);
+ vlan_mapping.val[2] |= BIT(cpu_port);
+ vlan_mapping.val[1] |= BIT(port);
+ if (untagged)
+ vlan_mapping.val[2] &= ~BIT(port);
+ else
+ vlan_mapping.val[2] |= BIT(port);
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ /* In case an Active VLAN was creaetd delete it again */
+ if (active_vlan_created)
+ gswip_vlan_active_remove(priv, idx);
+ return err;
+ }
+
+ if (pvid)
+ gswip_switch_w(priv, idx, GSWIP_PCE_DEFPVID(port));
+
+ return 0;
+}
+
+static int gswip_vlan_remove(struct gswip_priv *priv,
+ struct net_device *bridge, int port,
+ u16 vid, bool pvid, bool vlan_aware)
+{
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ int idx = -1;
+ int i;
+ int err;
+
+ /* Check if there is already a page for this bridge */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge &&
+ (!vlan_aware || priv->vlans[i].vid == vid)) {
+ idx = i;
+ break;
+ }
+ }
+
+ if (idx == -1) {
+ dev_err(priv->dev, "bridge to leave does not exists\n");
+ return -ENOENT;
+ }
+
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ err = gswip_pce_table_entry_read(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err);
+ return err;
+ }
+
+ vlan_mapping.val[1] &= ~BIT(port);
+ vlan_mapping.val[2] &= ~BIT(port);
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ return err;
+ }
+
+ /* In case all ports are removed from the bridge, remove the VLAN */
+ if ((vlan_mapping.val[1] & ~BIT(cpu_port)) == 0) {
+ err = gswip_vlan_active_remove(priv, idx);
+ if (err) {
+ dev_err(priv->dev, "failed to write active VLAN: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ /* GSWIP 2.2 (GRX300) and later program here the VID directly. */
+ if (pvid)
+ gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port));
+
+ return 0;
+}
+
+static int gswip_port_bridge_join(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge,
+ bool *tx_fwd_offload,
+ struct netlink_ext_ack *extack)
+{
+ struct net_device *br = bridge.dev;
+ struct gswip_priv *priv = ds->priv;
+ int err;
+
+ /* When the bridge uses VLAN filtering we have to configure VLAN
+ * specific bridges. No bridge is configured here.
+ */
+ if (!br_vlan_enabled(br)) {
+ err = gswip_vlan_add_unaware(priv, br, port);
+ if (err)
+ return err;
+ priv->port_vlan_filter &= ~BIT(port);
+ } else {
+ priv->port_vlan_filter |= BIT(port);
+ }
+ return gswip_add_single_port_br(priv, port, false);
+}
+
+static void gswip_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge)
+{
+ struct net_device *br = bridge.dev;
+ struct gswip_priv *priv = ds->priv;
+
+ gswip_add_single_port_br(priv, port, true);
+
+ /* When the bridge uses VLAN filtering we have to configure VLAN
+ * specific bridges. No bridge is configured here.
+ */
+ if (!br_vlan_enabled(br))
+ gswip_vlan_remove(priv, br, port, 0, true, false);
+}
+
+static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+{
+ struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port));
+ struct gswip_priv *priv = ds->priv;
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int pos = max_ports;
+ int i, idx = -1;
+
+ /* We only support VLAN filtering on bridges */
+ if (!dsa_is_cpu_port(ds, port) && !bridge)
+ return -EOPNOTSUPP;
+
+ /* Check if there is already a page for this VLAN */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge &&
+ priv->vlans[i].vid == vlan->vid) {
+ idx = i;
+ break;
+ }
+ }
+
+ /* If this VLAN is not programmed yet, we have to reserve
+ * one entry in the VLAN table. Make sure we start at the
+ * next position round.
+ */
+ if (idx == -1) {
+ /* Look for a free slot */
+ for (; pos < ARRAY_SIZE(priv->vlans); pos++) {
+ if (!priv->vlans[pos].bridge) {
+ idx = pos;
+ pos++;
+ break;
+ }
+ }
+
+ if (idx == -1) {
+ NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table");
+ return -ENOSPC;
+ }
+ }
+
+ return 0;
+}
+
+static int gswip_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+{
+ struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port));
+ struct gswip_priv *priv = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ int err;
+
+ err = gswip_port_vlan_prepare(ds, port, vlan, extack);
+ if (err)
+ return err;
+
+ /* We have to receive all packets on the CPU port and should not
+ * do any VLAN filtering here. This is also called with bridge
+ * NULL and then we do not know for which bridge to configure
+ * this.
+ */
+ if (dsa_is_cpu_port(ds, port))
+ return 0;
+
+ return gswip_vlan_add_aware(priv, bridge, port, vlan->vid,
+ untagged, pvid);
+}
+
+static int gswip_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port));
+ struct gswip_priv *priv = ds->priv;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+
+ /* We have to receive all packets on the CPU port and should not
+ * do any VLAN filtering here. This is also called with bridge
+ * NULL and then we do not know for which bridge to configure
+ * this.
+ */
+ if (dsa_is_cpu_port(ds, port))
+ return 0;
+
+ return gswip_vlan_remove(priv, bridge, port, vlan->vid, pvid, true);
+}
+
+static void gswip_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+ int i;
+ int err;
+
+ for (i = 0; i < 2048; i++) {
+ mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE;
+ mac_bridge.index = i;
+
+ err = gswip_pce_table_entry_read(priv, &mac_bridge);
+ if (err) {
+ dev_err(priv->dev, "failed to read mac bridge: %d\n",
+ err);
+ return;
+ }
+
+ if (!mac_bridge.valid)
+ continue;
+
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC)
+ continue;
+
+ if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) != port)
+ continue;
+
+ mac_bridge.valid = false;
+ err = gswip_pce_table_entry_write(priv, &mac_bridge);
+ if (err) {
+ dev_err(priv->dev, "failed to write mac bridge: %d\n",
+ err);
+ return;
+ }
+ }
+}
+
+static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct gswip_priv *priv = ds->priv;
+ u32 stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
+ GSWIP_SDMA_PCTRLp(port));
+ return;
+ case BR_STATE_BLOCKING:
+ case BR_STATE_LISTENING:
+ stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING;
+ break;
+ default:
+ dev_err(priv->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
+ GSWIP_SDMA_PCTRLp(port));
+ gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_PSTATE_MASK, stp_state,
+ GSWIP_PCE_PCTRL_0p(port));
+}
+
+static int gswip_port_fdb(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid, bool add)
+{
+ struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port));
+ struct gswip_priv *priv = ds->priv;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int fid = -1;
+ int i;
+ int err;
+
+ if (!bridge)
+ return -EINVAL;
+
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge) {
+ fid = priv->vlans[i].fid;
+ break;
+ }
+ }
+
+ if (fid == -1) {
+ dev_err(priv->dev, "Port not part of a bridge\n");
+ return -EINVAL;
+ }
+
+ mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE;
+ mac_bridge.key_mode = true;
+ mac_bridge.key[0] = addr[5] | (addr[4] << 8);
+ mac_bridge.key[1] = addr[3] | (addr[2] << 8);
+ mac_bridge.key[2] = addr[1] | (addr[0] << 8);
+ mac_bridge.key[3] = fid;
+ mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */
+ mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_STATIC;
+ mac_bridge.valid = add;
+
+ err = gswip_pce_table_entry_write(priv, &mac_bridge);
+ if (err)
+ dev_err(priv->dev, "failed to write mac bridge: %d\n", err);
+
+ return err;
+}
+
+static int gswip_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ return gswip_port_fdb(ds, port, addr, vid, true);
+}
+
+static int gswip_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ return gswip_port_fdb(ds, port, addr, vid, false);
+}
+
+static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+ unsigned char addr[6];
+ int i;
+ int err;
+
+ for (i = 0; i < 2048; i++) {
+ mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE;
+ mac_bridge.index = i;
+
+ err = gswip_pce_table_entry_read(priv, &mac_bridge);
+ if (err) {
+ dev_err(priv->dev,
+ "failed to read mac bridge entry %d: %d\n",
+ i, err);
+ return err;
+ }
+
+ if (!mac_bridge.valid)
+ continue;
+
+ addr[5] = mac_bridge.key[0] & 0xff;
+ addr[4] = (mac_bridge.key[0] >> 8) & 0xff;
+ addr[3] = mac_bridge.key[1] & 0xff;
+ addr[2] = (mac_bridge.key[1] >> 8) & 0xff;
+ addr[1] = mac_bridge.key[2] & 0xff;
+ addr[0] = (mac_bridge.key[2] >> 8) & 0xff;
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) {
+ if (mac_bridge.val[0] & BIT(port)) {
+ err = cb(addr, 0, true, data);
+ if (err)
+ return err;
+ }
+ } else {
+ if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) {
+ err = cb(addr, 0, false, data);
+ if (err)
+ return err;
+ }
+ }
+ }
+ return 0;
+}
+
+static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ /* Includes 8 bytes for special header. */
+ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN;
+}
+
+static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct gswip_priv *priv = ds->priv;
+ int cpu_port = priv->hw_info->cpu_port;
+
+ /* CPU port always has maximum mtu of user ports, so use it to set
+ * switch frame size, including 8 byte special header.
+ */
+ if (port == cpu_port) {
+ new_mtu += 8;
+ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
+ GSWIP_MAC_FLEN);
+ }
+
+ /* Enable MLEN for ports with non-standard MTUs, including the special
+ * header on the CPU port added above.
+ */
+ if (new_mtu != ETH_DATA_LEN)
+ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
+ GSWIP_MAC_CTRL_2p(port));
+ else
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0,
+ GSWIP_MAC_CTRL_2p(port));
+
+ return 0;
+}
+
+static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ switch (port) {
+ case 0:
+ case 1:
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_MII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_REVMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
+ break;
+
+ case 2:
+ case 3:
+ case 4:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+
+ case 5:
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+ }
+
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
+}
+
+static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ switch (port) {
+ case 0:
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+
+ case 5:
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
+ break;
+ }
+
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
+}
+
+static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
+{
+ u32 mdio_phy;
+
+ if (link)
+ mdio_phy = GSWIP_MDIO_PHY_LINK_UP;
+ else
+ mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN;
+
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
+}
+
+static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed,
+ phy_interface_t interface)
+{
+ u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0;
+
+ switch (speed) {
+ case SPEED_10:
+ mdio_phy = GSWIP_MDIO_PHY_SPEED_M10;
+
+ if (interface == PHY_INTERFACE_MODE_RMII)
+ mii_cfg = GSWIP_MII_CFG_RATE_M50;
+ else
+ mii_cfg = GSWIP_MII_CFG_RATE_M2P5;
+
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII;
+ break;
+
+ case SPEED_100:
+ mdio_phy = GSWIP_MDIO_PHY_SPEED_M100;
+
+ if (interface == PHY_INTERFACE_MODE_RMII)
+ mii_cfg = GSWIP_MII_CFG_RATE_M50;
+ else
+ mii_cfg = GSWIP_MII_CFG_RATE_M25;
+
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII;
+ break;
+
+ case SPEED_1000:
+ mdio_phy = GSWIP_MDIO_PHY_SPEED_G1;
+
+ mii_cfg = GSWIP_MII_CFG_RATE_M125;
+
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII;
+ break;
+ }
+
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port);
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0,
+ GSWIP_MAC_CTRL_0p(port));
+}
+
+static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex)
+{
+ u32 mac_ctrl_0, mdio_phy;
+
+ if (duplex == DUPLEX_FULL) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN;
+ mdio_phy = GSWIP_MDIO_PHY_FDUP_EN;
+ } else {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS;
+ mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS;
+ }
+
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0,
+ GSWIP_MAC_CTRL_0p(port));
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
+}
+
+static void gswip_port_set_pause(struct gswip_priv *priv, int port,
+ bool tx_pause, bool rx_pause)
+{
+ u32 mac_ctrl_0, mdio_phy;
+
+ if (tx_pause && rx_pause) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN |
+ GSWIP_MDIO_PHY_FCONRX_EN;
+ } else if (tx_pause) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN |
+ GSWIP_MDIO_PHY_FCONRX_DIS;
+ } else if (rx_pause) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS |
+ GSWIP_MDIO_PHY_FCONRX_EN;
+ } else {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS |
+ GSWIP_MDIO_PHY_FCONRX_DIS;
+ }
+
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FCON_MASK,
+ mac_ctrl_0, GSWIP_MAC_CTRL_0p(port));
+ gswip_mdio_mask(priv,
+ GSWIP_MDIO_PHY_FCONTX_MASK |
+ GSWIP_MDIO_PHY_FCONRX_MASK,
+ mdio_phy, GSWIP_MDIO_PHYp(port));
+}
+
+static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct gswip_priv *priv = ds->priv;
+ u32 miicfg = 0;
+
+ miicfg |= GSWIP_MII_CFG_LDCLKDIS;
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_INTERNAL:
+ miicfg |= GSWIP_MII_CFG_MODE_MIIM;
+ break;
+ case PHY_INTERFACE_MODE_REVMII:
+ miicfg |= GSWIP_MII_CFG_MODE_MIIP;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ miicfg |= GSWIP_MII_CFG_MODE_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ miicfg |= GSWIP_MII_CFG_MODE_GMII;
+ break;
+ default:
+ dev_err(ds->dev,
+ "Unsupported interface: %d\n", state->interface);
+ return;
+ }
+
+ gswip_mii_mask_cfg(priv,
+ GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK |
+ GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS,
+ miicfg, port);
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK |
+ GSWIP_MII_PCDU_RXDLY_MASK, 0, port);
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_RXDLY_MASK, 0, port);
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK, 0, port);
+ break;
+ default:
+ break;
+ }
+}
+
+static void gswip_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port);
+
+ if (!dsa_is_cpu_port(ds, port))
+ gswip_port_set_link(priv, port, false);
+}
+
+static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ if (!dsa_is_cpu_port(ds, port)) {
+ gswip_port_set_link(priv, port, true);
+ gswip_port_set_speed(priv, port, speed, interface);
+ gswip_port_set_duplex(priv, port, duplex);
+ gswip_port_set_pause(priv, port, tx_pause, rx_pause);
+ }
+
+ gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port);
+}
+
+static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ int i;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++)
+ strncpy(data + i * ETH_GSTRING_LEN, gswip_rmon_cnt[i].name,
+ ETH_GSTRING_LEN);
+}
+
+static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
+ u32 index)
+{
+ u32 result;
+ int err;
+
+ gswip_switch_w(priv, index, GSWIP_BM_RAM_ADDR);
+ gswip_switch_mask(priv, GSWIP_BM_RAM_CTRL_ADDR_MASK |
+ GSWIP_BM_RAM_CTRL_OPMOD,
+ table | GSWIP_BM_RAM_CTRL_BAS,
+ GSWIP_BM_RAM_CTRL);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL,
+ GSWIP_BM_RAM_CTRL_BAS);
+ if (err) {
+ dev_err(priv->dev, "timeout while reading table: %u, index: %u",
+ table, index);
+ return 0;
+ }
+
+ result = gswip_switch_r(priv, GSWIP_BM_RAM_VAL(0));
+ result |= gswip_switch_r(priv, GSWIP_BM_RAM_VAL(1)) << 16;
+
+ return result;
+}
+
+static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct gswip_priv *priv = ds->priv;
+ const struct gswip_rmon_cnt_desc *rmon_cnt;
+ int i;
+ u64 high;
+
+ for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) {
+ rmon_cnt = &gswip_rmon_cnt[i];
+
+ data[i] = gswip_bcm_ram_entry_read(priv, port,
+ rmon_cnt->offset);
+ if (rmon_cnt->size == 2) {
+ high = gswip_bcm_ram_entry_read(priv, port,
+ rmon_cnt->offset + 1);
+ data[i] |= high << 32;
+ }
+ }
+}
+
+static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ if (sset != ETH_SS_STATS)
+ return 0;
+
+ return ARRAY_SIZE(gswip_rmon_cnt);
+}
+
+static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
+ .get_tag_protocol = gswip_get_tag_protocol,
+ .setup = gswip_setup,
+ .port_enable = gswip_port_enable,
+ .port_disable = gswip_port_disable,
+ .port_bridge_join = gswip_port_bridge_join,
+ .port_bridge_leave = gswip_port_bridge_leave,
+ .port_fast_age = gswip_port_fast_age,
+ .port_vlan_filtering = gswip_port_vlan_filtering,
+ .port_vlan_add = gswip_port_vlan_add,
+ .port_vlan_del = gswip_port_vlan_del,
+ .port_stp_state_set = gswip_port_stp_state_set,
+ .port_fdb_add = gswip_port_fdb_add,
+ .port_fdb_del = gswip_port_fdb_del,
+ .port_fdb_dump = gswip_port_fdb_dump,
+ .port_change_mtu = gswip_port_change_mtu,
+ .port_max_mtu = gswip_port_max_mtu,
+ .phylink_get_caps = gswip_xrx200_phylink_get_caps,
+ .phylink_mac_config = gswip_phylink_mac_config,
+ .phylink_mac_link_down = gswip_phylink_mac_link_down,
+ .phylink_mac_link_up = gswip_phylink_mac_link_up,
+ .get_strings = gswip_get_strings,
+ .get_ethtool_stats = gswip_get_ethtool_stats,
+ .get_sset_count = gswip_get_sset_count,
+};
+
+static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
+ .get_tag_protocol = gswip_get_tag_protocol,
+ .setup = gswip_setup,
+ .port_enable = gswip_port_enable,
+ .port_disable = gswip_port_disable,
+ .port_bridge_join = gswip_port_bridge_join,
+ .port_bridge_leave = gswip_port_bridge_leave,
+ .port_fast_age = gswip_port_fast_age,
+ .port_vlan_filtering = gswip_port_vlan_filtering,
+ .port_vlan_add = gswip_port_vlan_add,
+ .port_vlan_del = gswip_port_vlan_del,
+ .port_stp_state_set = gswip_port_stp_state_set,
+ .port_fdb_add = gswip_port_fdb_add,
+ .port_fdb_del = gswip_port_fdb_del,
+ .port_fdb_dump = gswip_port_fdb_dump,
+ .port_change_mtu = gswip_port_change_mtu,
+ .port_max_mtu = gswip_port_max_mtu,
+ .phylink_get_caps = gswip_xrx300_phylink_get_caps,
+ .phylink_mac_config = gswip_phylink_mac_config,
+ .phylink_mac_link_down = gswip_phylink_mac_link_down,
+ .phylink_mac_link_up = gswip_phylink_mac_link_up,
+ .get_strings = gswip_get_strings,
+ .get_ethtool_stats = gswip_get_ethtool_stats,
+ .get_sset_count = gswip_get_sset_count,
+};
+
+static const struct xway_gphy_match_data xrx200a1x_gphy_data = {
+ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin",
+ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin",
+};
+
+static const struct xway_gphy_match_data xrx200a2x_gphy_data = {
+ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin",
+ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin",
+};
+
+static const struct xway_gphy_match_data xrx300_gphy_data = {
+ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin",
+ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin",
+};
+
+static const struct of_device_id xway_gphy_match[] __maybe_unused = {
+ { .compatible = "lantiq,xrx200-gphy-fw", .data = NULL },
+ { .compatible = "lantiq,xrx200a1x-gphy-fw", .data = &xrx200a1x_gphy_data },
+ { .compatible = "lantiq,xrx200a2x-gphy-fw", .data = &xrx200a2x_gphy_data },
+ { .compatible = "lantiq,xrx300-gphy-fw", .data = &xrx300_gphy_data },
+ { .compatible = "lantiq,xrx330-gphy-fw", .data = &xrx300_gphy_data },
+ {},
+};
+
+static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gphy_fw)
+{
+ struct device *dev = priv->dev;
+ const struct firmware *fw;
+ void *fw_addr;
+ dma_addr_t dma_addr;
+ dma_addr_t dev_addr;
+ size_t size;
+ int ret;
+
+ ret = clk_prepare_enable(gphy_fw->clk_gate);
+ if (ret)
+ return ret;
+
+ reset_control_assert(gphy_fw->reset);
+
+ /* The vendor BSP uses a 200ms delay after asserting the reset line.
+ * Without this some users are observing that the PHY is not coming up
+ * on the MDIO bus.
+ */
+ msleep(200);
+
+ ret = request_firmware(&fw, gphy_fw->fw_name, dev);
+ if (ret) {
+ dev_err(dev, "failed to load firmware: %s, error: %i\n",
+ gphy_fw->fw_name, ret);
+ return ret;
+ }
+
+ /* GPHY cores need the firmware code in a persistent and contiguous
+ * memory area with a 16 kB boundary aligned start address.
+ */
+ size = fw->size + XRX200_GPHY_FW_ALIGN;
+
+ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL);
+ if (fw_addr) {
+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
+ dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
+ memcpy(fw_addr, fw->data, fw->size);
+ } else {
+ dev_err(dev, "failed to alloc firmware memory\n");
+ release_firmware(fw);
+ return -ENOMEM;
+ }
+
+ release_firmware(fw);
+
+ ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, dev_addr);
+ if (ret)
+ return ret;
+
+ reset_control_deassert(gphy_fw->reset);
+
+ return ret;
+}
+
+static int gswip_gphy_fw_probe(struct gswip_priv *priv,
+ struct gswip_gphy_fw *gphy_fw,
+ struct device_node *gphy_fw_np, int i)
+{
+ struct device *dev = priv->dev;
+ u32 gphy_mode;
+ int ret;
+ char gphyname[10];
+
+ snprintf(gphyname, sizeof(gphyname), "gphy%d", i);
+
+ gphy_fw->clk_gate = devm_clk_get(dev, gphyname);
+ if (IS_ERR(gphy_fw->clk_gate)) {
+ dev_err(dev, "Failed to lookup gate clock\n");
+ return PTR_ERR(gphy_fw->clk_gate);
+ }
+
+ ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(gphy_fw_np, "lantiq,gphy-mode", &gphy_mode);
+ /* Default to GE mode */
+ if (ret)
+ gphy_mode = GPHY_MODE_GE;
+
+ switch (gphy_mode) {
+ case GPHY_MODE_FE:
+ gphy_fw->fw_name = priv->gphy_fw_name_cfg->fe_firmware_name;
+ break;
+ case GPHY_MODE_GE:
+ gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name;
+ break;
+ default:
+ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
+ return -EINVAL;
+ }
+
+ gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np);
+ if (IS_ERR(gphy_fw->reset))
+ return dev_err_probe(dev, PTR_ERR(gphy_fw->reset),
+ "Failed to lookup gphy reset\n");
+
+ return gswip_gphy_fw_load(priv, gphy_fw);
+}
+
+static void gswip_gphy_fw_remove(struct gswip_priv *priv,
+ struct gswip_gphy_fw *gphy_fw)
+{
+ int ret;
+
+ /* check if the device was fully probed */
+ if (!gphy_fw->fw_name)
+ return;
+
+ ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0);
+ if (ret)
+ dev_err(priv->dev, "can not reset GPHY FW pointer");
+
+ clk_disable_unprepare(gphy_fw->clk_gate);
+
+ reset_control_put(gphy_fw->reset);
+}
+
+static int gswip_gphy_fw_list(struct gswip_priv *priv,
+ struct device_node *gphy_fw_list_np, u32 version)
+{
+ struct device *dev = priv->dev;
+ struct device_node *gphy_fw_np;
+ const struct of_device_id *match;
+ int err;
+ int i = 0;
+
+ /* The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older
+ * GPHY firmware. The VRX200 rev 1.2 uses the GSWIP 2.1 and also
+ * needs a different GPHY firmware.
+ */
+ if (of_device_is_compatible(gphy_fw_list_np, "lantiq,xrx200-gphy-fw")) {
+ switch (version) {
+ case GSWIP_VERSION_2_0:
+ priv->gphy_fw_name_cfg = &xrx200a1x_gphy_data;
+ break;
+ case GSWIP_VERSION_2_1:
+ priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
+ break;
+ default:
+ dev_err(dev, "unknown GSWIP version: 0x%x", version);
+ return -ENOENT;
+ }
+ }
+
+ match = of_match_node(xway_gphy_match, gphy_fw_list_np);
+ if (match && match->data)
+ priv->gphy_fw_name_cfg = match->data;
+
+ if (!priv->gphy_fw_name_cfg) {
+ dev_err(dev, "GPHY compatible type not supported");
+ return -ENOENT;
+ }
+
+ priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np);
+ if (!priv->num_gphy_fw)
+ return -ENOENT;
+
+ priv->rcu_regmap = syscon_regmap_lookup_by_phandle(gphy_fw_list_np,
+ "lantiq,rcu");
+ if (IS_ERR(priv->rcu_regmap))
+ return PTR_ERR(priv->rcu_regmap);
+
+ priv->gphy_fw = devm_kmalloc_array(dev, priv->num_gphy_fw,
+ sizeof(*priv->gphy_fw),
+ GFP_KERNEL | __GFP_ZERO);
+ if (!priv->gphy_fw)
+ return -ENOMEM;
+
+ for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) {
+ err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i],
+ gphy_fw_np, i);
+ if (err) {
+ of_node_put(gphy_fw_np);
+ goto remove_gphy;
+ }
+ i++;
+ }
+
+ /* The standalone PHY11G requires 300ms to be fully
+ * initialized and ready for any MDIO communication after being
+ * taken out of reset. For the SoC-internal GPHY variant there
+ * is no (known) documentation for the minimum time after a
+ * reset. Use the same value as for the standalone variant as
+ * some users have reported internal PHYs not being detected
+ * without any delay.
+ */
+ msleep(300);
+
+ return 0;
+
+remove_gphy:
+ for (i = 0; i < priv->num_gphy_fw; i++)
+ gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]);
+ return err;
+}
+
+static int gswip_probe(struct platform_device *pdev)
+{
+ struct gswip_priv *priv;
+ struct device_node *np, *mdio_np, *gphy_fw_np;
+ struct device *dev = &pdev->dev;
+ int err;
+ int i;
+ u32 version;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->gswip = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->gswip))
+ return PTR_ERR(priv->gswip);
+
+ priv->mdio = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(priv->mdio))
+ return PTR_ERR(priv->mdio);
+
+ priv->mii = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(priv->mii))
+ return PTR_ERR(priv->mii);
+
+ priv->hw_info = of_device_get_match_data(dev);
+ if (!priv->hw_info)
+ return -EINVAL;
+
+ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = dev;
+ priv->ds->num_ports = priv->hw_info->max_ports;
+ priv->ds->priv = priv;
+ priv->ds->ops = priv->hw_info->ops;
+ priv->dev = dev;
+ mutex_init(&priv->pce_table_lock);
+ version = gswip_switch_r(priv, GSWIP_VERSION);
+
+ np = dev->of_node;
+ switch (version) {
+ case GSWIP_VERSION_2_0:
+ case GSWIP_VERSION_2_1:
+ if (!of_device_is_compatible(np, "lantiq,xrx200-gswip"))
+ return -EINVAL;
+ break;
+ case GSWIP_VERSION_2_2:
+ case GSWIP_VERSION_2_2_ETC:
+ if (!of_device_is_compatible(np, "lantiq,xrx300-gswip") &&
+ !of_device_is_compatible(np, "lantiq,xrx330-gswip"))
+ return -EINVAL;
+ break;
+ default:
+ dev_err(dev, "unknown GSWIP version: 0x%x", version);
+ return -ENOENT;
+ }
+
+ /* bring up the mdio bus */
+ gphy_fw_np = of_get_compatible_child(dev->of_node, "lantiq,gphy-fw");
+ if (gphy_fw_np) {
+ err = gswip_gphy_fw_list(priv, gphy_fw_np, version);
+ of_node_put(gphy_fw_np);
+ if (err) {
+ dev_err(dev, "gphy fw probe failed\n");
+ return err;
+ }
+ }
+
+ /* bring up the mdio bus */
+ mdio_np = of_get_compatible_child(dev->of_node, "lantiq,xrx200-mdio");
+ if (mdio_np) {
+ err = gswip_mdio(priv, mdio_np);
+ if (err) {
+ dev_err(dev, "mdio probe failed\n");
+ goto put_mdio_node;
+ }
+ }
+
+ err = dsa_register_switch(priv->ds);
+ if (err) {
+ dev_err(dev, "dsa switch register failed: %i\n", err);
+ goto mdio_bus;
+ }
+ if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
+ dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+ priv->hw_info->cpu_port);
+ err = -EINVAL;
+ goto disable_switch;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ dev_info(dev, "probed GSWIP version %lx mod %lx\n",
+ (version & GSWIP_VERSION_REV_MASK) >> GSWIP_VERSION_REV_SHIFT,
+ (version & GSWIP_VERSION_MOD_MASK) >> GSWIP_VERSION_MOD_SHIFT);
+ return 0;
+
+disable_switch:
+ gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
+ dsa_unregister_switch(priv->ds);
+mdio_bus:
+ if (mdio_np) {
+ mdiobus_unregister(priv->ds->slave_mii_bus);
+ mdiobus_free(priv->ds->slave_mii_bus);
+ }
+put_mdio_node:
+ of_node_put(mdio_np);
+ for (i = 0; i < priv->num_gphy_fw; i++)
+ gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]);
+ return err;
+}
+
+static int gswip_remove(struct platform_device *pdev)
+{
+ struct gswip_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ if (!priv)
+ return 0;
+
+ /* disable the switch */
+ gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
+
+ dsa_unregister_switch(priv->ds);
+
+ if (priv->ds->slave_mii_bus) {
+ mdiobus_unregister(priv->ds->slave_mii_bus);
+ of_node_put(priv->ds->slave_mii_bus->dev.of_node);
+ mdiobus_free(priv->ds->slave_mii_bus);
+ }
+
+ for (i = 0; i < priv->num_gphy_fw; i++)
+ gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]);
+
+ return 0;
+}
+
+static void gswip_shutdown(struct platform_device *pdev)
+{
+ struct gswip_priv *priv = platform_get_drvdata(pdev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(priv->ds);
+
+ platform_set_drvdata(pdev, NULL);
+}
+
+static const struct gswip_hw_info gswip_xrx200 = {
+ .max_ports = 7,
+ .cpu_port = 6,
+ .ops = &gswip_xrx200_switch_ops,
+};
+
+static const struct gswip_hw_info gswip_xrx300 = {
+ .max_ports = 7,
+ .cpu_port = 6,
+ .ops = &gswip_xrx300_switch_ops,
+};
+
+static const struct of_device_id gswip_of_match[] = {
+ { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 },
+ { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 },
+ { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, gswip_of_match);
+
+static struct platform_driver gswip_driver = {
+ .probe = gswip_probe,
+ .remove = gswip_remove,
+ .shutdown = gswip_shutdown,
+ .driver = {
+ .name = "gswip",
+ .of_match_table = gswip_of_match,
+ },
+};
+
+module_platform_driver(gswip_driver);
+
+MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin");
+MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin");
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_DESCRIPTION("Lantiq / Intel GSWIP driver");
+MODULE_LICENSE("GPL v2");