Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1479 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
new file mode 100644
index 0000000000..91aba470fb
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -0,0 +1,1479 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ8795 switch driver
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ *	Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/if_vlan.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/micrel_phy.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+#include <linux/phylink.h>
+
+#include "ksz_common.h"
+#include "ksz8795_reg.h"
+#include "ksz8.h"
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+			 bool set)
+{
+	regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset),
+			   bits, set ? bits : 0);
+}
+
+static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data)
+{
+	const u16 *regs;
+	u16 ctrl_addr;
+	int ret = 0;
+
+	regs = dev->info->regs;
+
+	mutex_lock(&dev->alu_mutex);
+
+	ctrl_addr = IND_ACC_TABLE(table) | addr;
+	ret = ksz_write8(dev, regs[REG_IND_BYTE], data);
+	if (!ret)
+		ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz8_reset_switch(struct ksz_device *dev)
+{
+	if (ksz_is_ksz88x3(dev)) {
+		/* reset switch */
+		ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+			KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true);
+		ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+			KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false);
+	} else {
+		/* reset switch */
+		ksz_write8(dev, REG_POWER_MANAGEMENT_1,
+			   SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
+		ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+	}
+
+	return 0;
+}
+
+static int ksz8863_change_mtu(struct ksz_device *dev, int frame_size)
+{
+	u8 ctrl2 = 0;
+
+	if (frame_size <= KSZ8_LEGAL_PACKET_SIZE)
+		ctrl2 |= KSZ8863_LEGAL_PACKET_ENABLE;
+	else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
+		ctrl2 |= KSZ8863_HUGE_PACKET_ENABLE;
+
+	return ksz_rmw8(dev, REG_SW_CTRL_2, KSZ8863_LEGAL_PACKET_ENABLE |
+			KSZ8863_HUGE_PACKET_ENABLE, ctrl2);
+}
+
+static int ksz8795_change_mtu(struct ksz_device *dev, int frame_size)
+{
+	u8 ctrl1 = 0, ctrl2 = 0;
+	int ret;
+
+	if (frame_size > KSZ8_LEGAL_PACKET_SIZE)
+		ctrl2 |= SW_LEGAL_PACKET_DISABLE;
+	if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
+		ctrl1 |= SW_HUGE_PACKET;
+
+	ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_HUGE_PACKET, ctrl1);
+	if (ret)
+		return ret;
+
+	return ksz_rmw8(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, ctrl2);
+}
+
+int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
+{
+	u16 frame_size;
+
+	if (!dsa_is_cpu_port(dev->ds, port))
+		return 0;
+
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	switch (dev->chip_id) {
+	case KSZ8795_CHIP_ID:
+	case KSZ8794_CHIP_ID:
+	case KSZ8765_CHIP_ID:
+		return ksz8795_change_mtu(dev, frame_size);
+	case KSZ8830_CHIP_ID:
+		return ksz8863_change_mtu(dev, frame_size);
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+{
+	u8 hi, lo;
+
+	/* Number of queues can only be 1, 2, or 4. */
+	switch (queue) {
+	case 4:
+	case 3:
+		queue = PORT_QUEUE_SPLIT_4;
+		break;
+	case 2:
+		queue = PORT_QUEUE_SPLIT_2;
+		break;
+	default:
+		queue = PORT_QUEUE_SPLIT_1;
+	}
+	ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
+	ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
+	lo &= ~PORT_QUEUE_SPLIT_L;
+	if (queue & PORT_QUEUE_SPLIT_2)
+		lo |= PORT_QUEUE_SPLIT_L;
+	hi &= ~PORT_QUEUE_SPLIT_H;
+	if (queue & PORT_QUEUE_SPLIT_4)
+		hi |= PORT_QUEUE_SPLIT_H;
+	ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
+	ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
+
+	/* Default is port based for egress rate limit. */
+	if (queue != PORT_QUEUE_SPLIT_1)
+		ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
+			true);
+}
+
+void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
+{
+	const u32 *masks;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u32 data;
+	u8 check;
+	int loop;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	ctrl_addr = addr + dev->info->reg_mib_cnt * port;
+	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	/* It is almost guaranteed to always read the valid bit because of
+	 * slow SPI speed.
+	 */
+	for (loop = 2; loop > 0; loop--) {
+		ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check);
+
+		if (check & masks[MIB_COUNTER_VALID]) {
+			ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+			if (check & masks[MIB_COUNTER_OVERFLOW])
+				*cnt += MIB_COUNTER_VALUE + 1;
+			*cnt += data & MIB_COUNTER_VALUE;
+			break;
+		}
+	}
+	mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *dropped, u64 *cnt)
+{
+	const u32 *masks;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u32 data;
+	u8 check;
+	int loop;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	addr -= dev->info->reg_mib_cnt;
+	ctrl_addr = (KSZ8795_MIB_TOTAL_RX_1 - KSZ8795_MIB_TOTAL_RX_0) * port;
+	ctrl_addr += addr + KSZ8795_MIB_TOTAL_RX_0;
+	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	/* It is almost guaranteed to always read the valid bit because of
+	 * slow SPI speed.
+	 */
+	for (loop = 2; loop > 0; loop--) {
+		ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check);
+
+		if (check & masks[MIB_COUNTER_VALID]) {
+			ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+			if (addr < 2) {
+				u64 total;
+
+				total = check & MIB_TOTAL_BYTES_H;
+				total <<= 32;
+				*cnt += total;
+				*cnt += data;
+				if (check & masks[MIB_COUNTER_OVERFLOW]) {
+					total = MIB_TOTAL_BYTES_H + 1;
+					total <<= 32;
+					*cnt += total;
+				}
+			} else {
+				if (check & masks[MIB_COUNTER_OVERFLOW])
+					*cnt += MIB_PACKET_DROPPED + 1;
+				*cnt += data & MIB_PACKET_DROPPED;
+			}
+			break;
+		}
+	}
+	mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *dropped, u64 *cnt)
+{
+	u32 *last = (u32 *)dropped;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u32 data;
+	u32 cur;
+
+	regs = dev->info->regs;
+
+	addr -= dev->info->reg_mib_cnt;
+	ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 :
+			   KSZ8863_MIB_PACKET_DROPPED_RX_0;
+	ctrl_addr += port;
+	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+	mutex_unlock(&dev->alu_mutex);
+
+	data &= MIB_PACKET_DROPPED;
+	cur = last[addr];
+	if (data != cur) {
+		last[addr] = data;
+		if (data < cur)
+			data += MIB_PACKET_DROPPED + 1;
+		data -= cur;
+		*cnt += data;
+	}
+}
+
+void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+		    u64 *dropped, u64 *cnt)
+{
+	if (ksz_is_ksz88x3(dev))
+		ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt);
+	else
+		ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt);
+}
+
+void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+	if (ksz_is_ksz88x3(dev))
+		return;
+
+	/* enable the port for flush/freeze function */
+	if (freeze)
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+	ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze);
+
+	/* disable the port after freeze is done */
+	if (!freeze)
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+}
+
+void ksz8_port_init_cnt(struct ksz_device *dev, int port)
+{
+	struct ksz_port_mib *mib = &dev->ports[port].mib;
+	u64 *dropped;
+
+	if (!ksz_is_ksz88x3(dev)) {
+		/* flush all enabled port MIB counters */
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+		ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+	}
+
+	mib->cnt_ptr = 0;
+
+	/* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->info->reg_mib_cnt) {
+		dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+					&mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+
+	/* last one in storage */
+	dropped = &mib->counters[dev->info->mib_cnt];
+
+	/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->info->mib_cnt) {
+		dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+					dropped, &mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+}
+
+static int ksz8_r_table(struct ksz_device *dev, int table, u16 addr, u64 *data)
+{
+	const u16 *regs;
+	u16 ctrl_addr;
+	int ret;
+
+	regs = dev->info->regs;
+
+	ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr;
+
+	mutex_lock(&dev->alu_mutex);
+	ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	if (ret)
+		goto unlock_alu;
+
+	ret = ksz_read64(dev, regs[REG_IND_DATA_HI], data);
+unlock_alu:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static int ksz8_w_table(struct ksz_device *dev, int table, u16 addr, u64 data)
+{
+	const u16 *regs;
+	u16 ctrl_addr;
+	int ret;
+
+	regs = dev->info->regs;
+
+	ctrl_addr = IND_ACC_TABLE(table) | addr;
+
+	mutex_lock(&dev->alu_mutex);
+	ret = ksz_write64(dev, regs[REG_IND_DATA_HI], data);
+	if (ret)
+		goto unlock_alu;
+
+	ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+unlock_alu:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
+{
+	int timeout = 100;
+	const u32 *masks;
+	const u16 *regs;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	do {
+		ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		timeout--;
+	} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
+
+	/* Entry is not ready for accessing. */
+	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
+		return -EAGAIN;
+	/* Entry is ready for accessing. */
+	} else {
+		ksz_read8(dev, regs[REG_IND_DATA_8], data);
+
+		/* There is no valid entry in the table. */
+		if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
+			return -ENXIO;
+	}
+	return 0;
+}
+
+int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries)
+{
+	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u8 data;
+	int rc;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	rc = ksz8_valid_dyn_entry(dev, &data);
+	if (rc == -EAGAIN) {
+		if (addr == 0)
+			*entries = 0;
+	} else if (rc == -ENXIO) {
+		*entries = 0;
+	/* At least one valid entry in the table. */
+	} else {
+		u64 buf = 0;
+		int cnt;
+
+		ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+		data_hi = (u32)(buf >> 32);
+		data_lo = (u32)buf;
+
+		/* Check out how many valid entry in the table. */
+		cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+		cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+		cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+			shifts[DYNAMIC_MAC_ENTRIES];
+		*entries = cnt + 1;
+
+		*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
+			shifts[DYNAMIC_MAC_FID];
+		*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+			shifts[DYNAMIC_MAC_SRC_PORT];
+		*timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >>
+			shifts[DYNAMIC_MAC_TIMESTAMP];
+
+		mac_addr[5] = (u8)data_lo;
+		mac_addr[4] = (u8)(data_lo >> 8);
+		mac_addr[3] = (u8)(data_lo >> 16);
+		mac_addr[2] = (u8)(data_lo >> 24);
+
+		mac_addr[1] = (u8)data_hi;
+		mac_addr[0] = (u8)(data_hi >> 8);
+		rc = 0;
+	}
+	mutex_unlock(&dev->alu_mutex);
+
+	return rc;
+}
+
+static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
+				struct alu_struct *alu, bool *valid)
+{
+	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
+	u64 data;
+	int ret;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	ret = ksz8_r_table(dev, TABLE_STATIC_MAC, addr, &data);
+	if (ret)
+		return ret;
+
+	data_hi = data >> 32;
+	data_lo = (u32)data;
+
+	if (!(data_hi & (masks[STATIC_MAC_TABLE_VALID] |
+			 masks[STATIC_MAC_TABLE_OVERRIDE]))) {
+		*valid = false;
+		return 0;
+	}
+
+	alu->mac[5] = (u8)data_lo;
+	alu->mac[4] = (u8)(data_lo >> 8);
+	alu->mac[3] = (u8)(data_lo >> 16);
+	alu->mac[2] = (u8)(data_lo >> 24);
+	alu->mac[1] = (u8)data_hi;
+	alu->mac[0] = (u8)(data_hi >> 8);
+	alu->port_forward =
+		(data_hi & masks[STATIC_MAC_TABLE_FWD_PORTS]) >>
+			shifts[STATIC_MAC_FWD_PORTS];
+	alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0;
+
+	/* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and
+	 * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the
+	 * static MAC table compared to doing write.
+	 */
+	if (ksz_is_ksz87xx(dev))
+		data_hi >>= 1;
+	alu->is_static = true;
+	alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0;
+	alu->fid = (data_hi & masks[STATIC_MAC_TABLE_FID]) >>
+		shifts[STATIC_MAC_FID];
+
+	*valid = true;
+
+	return 0;
+}
+
+static int ksz8_w_sta_mac_table(struct ksz_device *dev, u16 addr,
+				struct alu_struct *alu)
+{
+	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
+	u64 data;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	data_lo = ((u32)alu->mac[2] << 24) |
+		((u32)alu->mac[3] << 16) |
+		((u32)alu->mac[4] << 8) | alu->mac[5];
+	data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1];
+	data_hi |= (u32)alu->port_forward << shifts[STATIC_MAC_FWD_PORTS];
+
+	if (alu->is_override)
+		data_hi |= masks[STATIC_MAC_TABLE_OVERRIDE];
+	if (alu->is_use_fid) {
+		data_hi |= masks[STATIC_MAC_TABLE_USE_FID];
+		data_hi |= (u32)alu->fid << shifts[STATIC_MAC_FID];
+	}
+	if (alu->is_static)
+		data_hi |= masks[STATIC_MAC_TABLE_VALID];
+	else
+		data_hi &= ~masks[STATIC_MAC_TABLE_OVERRIDE];
+
+	data = (u64)data_hi << 32 | data_lo;
+
+	return ksz8_w_table(dev, TABLE_STATIC_MAC, addr, data);
+}
+
+static void ksz8_from_vlan(struct ksz_device *dev, u32 vlan, u8 *fid,
+			   u8 *member, u8 *valid)
+{
+	const u8 *shifts;
+	const u32 *masks;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	*fid = vlan & masks[VLAN_TABLE_FID];
+	*member = (vlan & masks[VLAN_TABLE_MEMBERSHIP]) >>
+			shifts[VLAN_TABLE_MEMBERSHIP_S];
+	*valid = !!(vlan & masks[VLAN_TABLE_VALID]);
+}
+
+static void ksz8_to_vlan(struct ksz_device *dev, u8 fid, u8 member, u8 valid,
+			 u16 *vlan)
+{
+	const u8 *shifts;
+	const u32 *masks;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	*vlan = fid;
+	*vlan |= (u16)member << shifts[VLAN_TABLE_MEMBERSHIP_S];
+	if (valid)
+		*vlan |= masks[VLAN_TABLE_VALID];
+}
+
+static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr)
+{
+	const u8 *shifts;
+	u64 data;
+	int i;
+
+	shifts = dev->info->shifts;
+
+	ksz8_r_table(dev, TABLE_VLAN, addr, &data);
+	addr *= 4;
+	for (i = 0; i < 4; i++) {
+		dev->vlan_cache[addr + i].table[0] = (u16)data;
+		data >>= shifts[VLAN_TABLE];
+	}
+}
+
+static void ksz8_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
+{
+	int index;
+	u16 *data;
+	u16 addr;
+	u64 buf;
+
+	data = (u16 *)&buf;
+	addr = vid / 4;
+	index = vid & 3;
+	ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
+	*vlan = data[index];
+}
+
+static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
+{
+	int index;
+	u16 *data;
+	u16 addr;
+	u64 buf;
+
+	data = (u16 *)&buf;
+	addr = vid / 4;
+	index = vid & 3;
+	ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
+	data[index] = vlan;
+	dev->vlan_cache[vid].table[0] = vlan;
+	ksz8_w_table(dev, TABLE_VLAN, addr, buf);
+}
+
+int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
+{
+	u8 restart, speed, ctrl, link;
+	int processed = true;
+	const u16 *regs;
+	u8 val1, val2;
+	u16 data = 0;
+	u8 p = phy;
+	int ret;
+
+	regs = dev->info->regs;
+
+	switch (reg) {
+	case MII_BMCR:
+		ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+		if (ret)
+			return ret;
+
+		ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+		if (ret)
+			return ret;
+
+		ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		if (restart & PORT_PHY_LOOPBACK)
+			data |= BMCR_LOOPBACK;
+		if (ctrl & PORT_FORCE_100_MBIT)
+			data |= BMCR_SPEED100;
+		if (ksz_is_ksz88x3(dev)) {
+			if ((ctrl & PORT_AUTO_NEG_ENABLE))
+				data |= BMCR_ANENABLE;
+		} else {
+			if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+				data |= BMCR_ANENABLE;
+		}
+		if (restart & PORT_POWER_DOWN)
+			data |= BMCR_PDOWN;
+		if (restart & PORT_AUTO_NEG_RESTART)
+			data |= BMCR_ANRESTART;
+		if (ctrl & PORT_FORCE_FULL_DUPLEX)
+			data |= BMCR_FULLDPLX;
+		if (speed & PORT_HP_MDIX)
+			data |= KSZ886X_BMCR_HP_MDIX;
+		if (restart & PORT_FORCE_MDIX)
+			data |= KSZ886X_BMCR_FORCE_MDI;
+		if (restart & PORT_AUTO_MDIX_DISABLE)
+			data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX;
+		if (restart & PORT_TX_DISABLE)
+			data |= KSZ886X_BMCR_DISABLE_TRANSMIT;
+		if (restart & PORT_LED_OFF)
+			data |= KSZ886X_BMCR_DISABLE_LED;
+		break;
+	case MII_BMSR:
+		ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+		if (ret)
+			return ret;
+
+		data = BMSR_100FULL |
+		       BMSR_100HALF |
+		       BMSR_10FULL |
+		       BMSR_10HALF |
+		       BMSR_ANEGCAPABLE;
+		if (link & PORT_AUTO_NEG_COMPLETE)
+			data |= BMSR_ANEGCOMPLETE;
+		if (link & PORT_STAT_LINK_GOOD)
+			data |= BMSR_LSTATUS;
+		break;
+	case MII_PHYSID1:
+		data = KSZ8795_ID_HI;
+		break;
+	case MII_PHYSID2:
+		if (ksz_is_ksz88x3(dev))
+			data = KSZ8863_ID_LO;
+		else
+			data = KSZ8795_ID_LO;
+		break;
+	case MII_ADVERTISE:
+		ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		data = ADVERTISE_CSMA;
+		if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
+			data |= ADVERTISE_PAUSE_CAP;
+		if (ctrl & PORT_AUTO_NEG_100BTX_FD)
+			data |= ADVERTISE_100FULL;
+		if (ctrl & PORT_AUTO_NEG_100BTX)
+			data |= ADVERTISE_100HALF;
+		if (ctrl & PORT_AUTO_NEG_10BT_FD)
+			data |= ADVERTISE_10FULL;
+		if (ctrl & PORT_AUTO_NEG_10BT)
+			data |= ADVERTISE_10HALF;
+		break;
+	case MII_LPA:
+		ret = ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link);
+		if (ret)
+			return ret;
+
+		data = LPA_SLCT;
+		if (link & PORT_REMOTE_SYM_PAUSE)
+			data |= LPA_PAUSE_CAP;
+		if (link & PORT_REMOTE_100BTX_FD)
+			data |= LPA_100FULL;
+		if (link & PORT_REMOTE_100BTX)
+			data |= LPA_100HALF;
+		if (link & PORT_REMOTE_10BT_FD)
+			data |= LPA_10FULL;
+		if (link & PORT_REMOTE_10BT)
+			data |= LPA_10HALF;
+		if (data & ~LPA_SLCT)
+			data |= LPA_LPACK;
+		break;
+	case PHY_REG_LINK_MD:
+		ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_CTRL, &val1);
+		if (ret)
+			return ret;
+
+		ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_RESULT, &val2);
+		if (ret)
+			return ret;
+
+		if (val1 & PORT_START_CABLE_DIAG)
+			data |= PHY_START_CABLE_DIAG;
+
+		if (val1 & PORT_CABLE_10M_SHORT)
+			data |= PHY_CABLE_10M_SHORT;
+
+		data |= FIELD_PREP(PHY_CABLE_DIAG_RESULT_M,
+				FIELD_GET(PORT_CABLE_DIAG_RESULT_M, val1));
+
+		data |= FIELD_PREP(PHY_CABLE_FAULT_COUNTER_M,
+				(FIELD_GET(PORT_CABLE_FAULT_COUNTER_H, val1) << 8) |
+				FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2));
+		break;
+	case PHY_REG_PHY_CTRL:
+		ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+		if (ret)
+			return ret;
+
+		if (link & PORT_MDIX_STATUS)
+			data |= KSZ886X_CTRL_MDIX_STAT;
+		break;
+	default:
+		processed = false;
+		break;
+	}
+	if (processed)
+		*val = data;
+
+	return 0;
+}
+
+int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+{
+	u8 restart, speed, ctrl, data;
+	const u16 *regs;
+	u8 p = phy;
+	int ret;
+
+	regs = dev->info->regs;
+
+	switch (reg) {
+	case MII_BMCR:
+
+		/* Do not support PHY reset function. */
+		if (val & BMCR_RESET)
+			break;
+		ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+		if (ret)
+			return ret;
+
+		data = speed;
+		if (val & KSZ886X_BMCR_HP_MDIX)
+			data |= PORT_HP_MDIX;
+		else
+			data &= ~PORT_HP_MDIX;
+
+		if (data != speed) {
+			ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
+			if (ret)
+				return ret;
+		}
+
+		ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		data = ctrl;
+		if (ksz_is_ksz88x3(dev)) {
+			if ((val & BMCR_ANENABLE))
+				data |= PORT_AUTO_NEG_ENABLE;
+			else
+				data &= ~PORT_AUTO_NEG_ENABLE;
+		} else {
+			if (!(val & BMCR_ANENABLE))
+				data |= PORT_AUTO_NEG_DISABLE;
+			else
+				data &= ~PORT_AUTO_NEG_DISABLE;
+
+			/* Fiber port does not support auto-negotiation. */
+			if (dev->ports[p].fiber)
+				data |= PORT_AUTO_NEG_DISABLE;
+		}
+
+		if (val & BMCR_SPEED100)
+			data |= PORT_FORCE_100_MBIT;
+		else
+			data &= ~PORT_FORCE_100_MBIT;
+		if (val & BMCR_FULLDPLX)
+			data |= PORT_FORCE_FULL_DUPLEX;
+		else
+			data &= ~PORT_FORCE_FULL_DUPLEX;
+
+		if (data != ctrl) {
+			ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data);
+			if (ret)
+				return ret;
+		}
+
+		ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+		if (ret)
+			return ret;
+
+		data = restart;
+		if (val & KSZ886X_BMCR_DISABLE_LED)
+			data |= PORT_LED_OFF;
+		else
+			data &= ~PORT_LED_OFF;
+		if (val & KSZ886X_BMCR_DISABLE_TRANSMIT)
+			data |= PORT_TX_DISABLE;
+		else
+			data &= ~PORT_TX_DISABLE;
+		if (val & BMCR_ANRESTART)
+			data |= PORT_AUTO_NEG_RESTART;
+		else
+			data &= ~(PORT_AUTO_NEG_RESTART);
+		if (val & BMCR_PDOWN)
+			data |= PORT_POWER_DOWN;
+		else
+			data &= ~PORT_POWER_DOWN;
+		if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX)
+			data |= PORT_AUTO_MDIX_DISABLE;
+		else
+			data &= ~PORT_AUTO_MDIX_DISABLE;
+		if (val & KSZ886X_BMCR_FORCE_MDI)
+			data |= PORT_FORCE_MDIX;
+		else
+			data &= ~PORT_FORCE_MDIX;
+		if (val & BMCR_LOOPBACK)
+			data |= PORT_PHY_LOOPBACK;
+		else
+			data &= ~PORT_PHY_LOOPBACK;
+
+		if (data != restart) {
+			ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL],
+					  data);
+			if (ret)
+				return ret;
+		}
+		break;
+	case MII_ADVERTISE:
+		ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		data = ctrl;
+		data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
+			  PORT_AUTO_NEG_100BTX_FD |
+			  PORT_AUTO_NEG_100BTX |
+			  PORT_AUTO_NEG_10BT_FD |
+			  PORT_AUTO_NEG_10BT);
+		if (val & ADVERTISE_PAUSE_CAP)
+			data |= PORT_AUTO_NEG_SYM_PAUSE;
+		if (val & ADVERTISE_100FULL)
+			data |= PORT_AUTO_NEG_100BTX_FD;
+		if (val & ADVERTISE_100HALF)
+			data |= PORT_AUTO_NEG_100BTX;
+		if (val & ADVERTISE_10FULL)
+			data |= PORT_AUTO_NEG_10BT_FD;
+		if (val & ADVERTISE_10HALF)
+			data |= PORT_AUTO_NEG_10BT;
+
+		if (data != ctrl) {
+			ret = ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data);
+			if (ret)
+				return ret;
+		}
+		break;
+	case PHY_REG_LINK_MD:
+		if (val & PHY_START_CABLE_DIAG)
+			ksz_port_cfg(dev, p, REG_PORT_LINK_MD_CTRL, PORT_START_CABLE_DIAG, true);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member)
+{
+	u8 data;
+
+	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+	data &= ~PORT_VLAN_MEMBERSHIP;
+	data |= (member & dev->port_mask);
+	ksz_pwrite8(dev, port, P_MIRROR_CTRL, data);
+}
+
+void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+	u8 learn[DSA_MAX_PORTS];
+	int first, index, cnt;
+	const u16 *regs;
+
+	regs = dev->info->regs;
+
+	if ((uint)port < dev->info->port_cnt) {
+		first = port;
+		cnt = port + 1;
+	} else {
+		/* Flush all ports. */
+		first = 0;
+		cnt = dev->info->port_cnt;
+	}
+	for (index = first; index < cnt; index++) {
+		ksz_pread8(dev, index, regs[P_STP_CTRL], &learn[index]);
+		if (!(learn[index] & PORT_LEARN_DISABLE))
+			ksz_pwrite8(dev, index, regs[P_STP_CTRL],
+				    learn[index] | PORT_LEARN_DISABLE);
+	}
+	ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+	for (index = first; index < cnt; index++) {
+		if (!(learn[index] & PORT_LEARN_DISABLE))
+			ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index]);
+	}
+}
+
+int ksz8_fdb_dump(struct ksz_device *dev, int port,
+		  dsa_fdb_dump_cb_t *cb, void *data)
+{
+	int ret = 0;
+	u16 i = 0;
+	u16 entries = 0;
+	u8 timestamp = 0;
+	u8 fid;
+	u8 src_port;
+	u8 mac[ETH_ALEN];
+
+	do {
+		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
+					   &timestamp, &entries);
+		if (!ret && port == src_port) {
+			ret = cb(mac, fid, false, data);
+			if (ret)
+				break;
+		}
+		i++;
+	} while (i < entries);
+	if (i >= entries)
+		ret = 0;
+
+	return ret;
+}
+
+static int ksz8_add_sta_mac(struct ksz_device *dev, int port,
+			    const unsigned char *addr, u16 vid)
+{
+	struct alu_struct alu;
+	int index, ret;
+	int empty = 0;
+
+	alu.port_forward = 0;
+	for (index = 0; index < dev->info->num_statics; index++) {
+		bool valid;
+
+		ret = ksz8_r_sta_mac_table(dev, index, &alu, &valid);
+		if (ret)
+			return ret;
+		if (!valid) {
+			/* Remember the first empty entry. */
+			if (!empty)
+				empty = index + 1;
+			continue;
+		}
+
+		if (!memcmp(alu.mac, addr, ETH_ALEN) && alu.fid == vid)
+			break;
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics && !empty)
+		return -ENOSPC;
+
+	/* add entry */
+	if (index == dev->info->num_statics) {
+		index = empty - 1;
+		memset(&alu, 0, sizeof(alu));
+		memcpy(alu.mac, addr, ETH_ALEN);
+		alu.is_static = true;
+	}
+	alu.port_forward |= BIT(port);
+	if (vid) {
+		alu.is_use_fid = true;
+
+		/* Need a way to map VID to FID. */
+		alu.fid = vid;
+	}
+
+	return ksz8_w_sta_mac_table(dev, index, &alu);
+}
+
+static int ksz8_del_sta_mac(struct ksz_device *dev, int port,
+			    const unsigned char *addr, u16 vid)
+{
+	struct alu_struct alu;
+	int index, ret;
+
+	for (index = 0; index < dev->info->num_statics; index++) {
+		bool valid;
+
+		ret = ksz8_r_sta_mac_table(dev, index, &alu, &valid);
+		if (ret)
+			return ret;
+		if (!valid)
+			continue;
+
+		if (!memcmp(alu.mac, addr, ETH_ALEN) && alu.fid == vid)
+			break;
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics)
+		return 0;
+
+	/* clear port */
+	alu.port_forward &= ~BIT(port);
+	if (!alu.port_forward)
+		alu.is_static = false;
+
+	return ksz8_w_sta_mac_table(dev, index, &alu);
+}
+
+int ksz8_mdb_add(struct ksz_device *dev, int port,
+		 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	return ksz8_add_sta_mac(dev, port, mdb->addr, mdb->vid);
+}
+
+int ksz8_mdb_del(struct ksz_device *dev, int port,
+		 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	return ksz8_del_sta_mac(dev, port, mdb->addr, mdb->vid);
+}
+
+int ksz8_fdb_add(struct ksz_device *dev, int port, const unsigned char *addr,
+		 u16 vid, struct dsa_db db)
+{
+	return ksz8_add_sta_mac(dev, port, addr, vid);
+}
+
+int ksz8_fdb_del(struct ksz_device *dev, int port, const unsigned char *addr,
+		 u16 vid, struct dsa_db db)
+{
+	return ksz8_del_sta_mac(dev, port, addr, vid);
+}
+
+int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag,
+			     struct netlink_ext_ack *extack)
+{
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
+	/* Discard packets with VID not enabled on the switch */
+	ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+
+	/* Discard packets with VID not enabled on the ingress port */
+	for (port = 0; port < dev->phy_port_cnt; ++port)
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_2, PORT_INGRESS_FILTER,
+			     flag);
+
+	return 0;
+}
+
+static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state)
+{
+	if (ksz_is_ksz88x3(dev)) {
+		ksz_cfg(dev, REG_SW_INSERT_SRC_PVID,
+			0x03 << (4 - 2 * port), state);
+	} else {
+		ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00);
+	}
+}
+
+int ksz8_port_vlan_add(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_vlan *vlan,
+		       struct netlink_ext_ack *extack)
+{
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	struct ksz_port *p = &dev->ports[port];
+	u16 data, new_pvid = 0;
+	u8 fid, member, valid;
+
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
+	/* If a VLAN is added with untagged flag different from the
+	 * port's Remove Tag flag, we need to change the latter.
+	 * Ignore VID 0, which is always untagged.
+	 * Ignore CPU port, which will always be tagged.
+	 */
+	if (untagged != p->remove_tag && vlan->vid != 0 &&
+	    port != dev->cpu_port) {
+		unsigned int vid;
+
+		/* Reject attempts to add a VLAN that requires the
+		 * Remove Tag flag to be changed, unless there are no
+		 * other VLANs currently configured.
+		 */
+		for (vid = 1; vid < dev->info->num_vlans; ++vid) {
+			/* Skip the VID we are going to add or reconfigure */
+			if (vid == vlan->vid)
+				continue;
+
+			ksz8_from_vlan(dev, dev->vlan_cache[vid].table[0],
+				       &fid, &member, &valid);
+			if (valid && (member & BIT(port)))
+				return -EINVAL;
+		}
+
+		ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+		p->remove_tag = untagged;
+	}
+
+	ksz8_r_vlan_table(dev, vlan->vid, &data);
+	ksz8_from_vlan(dev, data, &fid, &member, &valid);
+
+	/* First time to setup the VLAN entry. */
+	if (!valid) {
+		/* Need to find a way to map VID to FID. */
+		fid = 1;
+		valid = 1;
+	}
+	member |= BIT(port);
+
+	ksz8_to_vlan(dev, fid, member, valid, &data);
+	ksz8_w_vlan_table(dev, vlan->vid, data);
+
+	/* change PVID */
+	if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+		new_pvid = vlan->vid;
+
+	if (new_pvid) {
+		u16 vid;
+
+		ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
+		vid &= ~VLAN_VID_MASK;
+		vid |= new_pvid;
+		ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
+
+		ksz8_port_enable_pvid(dev, port, true);
+	}
+
+	return 0;
+}
+
+int ksz8_port_vlan_del(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_vlan *vlan)
+{
+	u16 data, pvid;
+	u8 fid, member, valid;
+
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
+	ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
+	pvid = pvid & 0xFFF;
+
+	ksz8_r_vlan_table(dev, vlan->vid, &data);
+	ksz8_from_vlan(dev, data, &fid, &member, &valid);
+
+	member &= ~BIT(port);
+
+	/* Invalidate the entry if no more member. */
+	if (!member) {
+		fid = 0;
+		valid = 0;
+	}
+
+	ksz8_to_vlan(dev, fid, member, valid, &data);
+	ksz8_w_vlan_table(dev, vlan->vid, data);
+
+	if (pvid == vlan->vid)
+		ksz8_port_enable_pvid(dev, port, false);
+
+	return 0;
+}
+
+int ksz8_port_mirror_add(struct ksz_device *dev, int port,
+			 struct dsa_mall_mirror_tc_entry *mirror,
+			 bool ingress, struct netlink_ext_ack *extack)
+{
+	if (ingress) {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+		dev->mirror_rx |= BIT(port);
+	} else {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+		dev->mirror_tx |= BIT(port);
+	}
+
+	ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+	/* configure mirror port */
+	if (dev->mirror_rx || dev->mirror_tx)
+		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+			     PORT_MIRROR_SNIFFER, true);
+
+	return 0;
+}
+
+void ksz8_port_mirror_del(struct ksz_device *dev, int port,
+			  struct dsa_mall_mirror_tc_entry *mirror)
+{
+	u8 data;
+
+	if (mirror->ingress) {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+		dev->mirror_rx &= ~BIT(port);
+	} else {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+		dev->mirror_tx &= ~BIT(port);
+	}
+
+	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+	if (!dev->mirror_rx && !dev->mirror_tx)
+		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+			     PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
+{
+	struct ksz_port *p = &dev->ports[port];
+
+	if (!p->interface && dev->compat_interface) {
+		dev_warn(dev->dev,
+			 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+			 "Please update your device tree.\n",
+			 port);
+		p->interface = dev->compat_interface;
+	}
+}
+
+void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	struct dsa_switch *ds = dev->ds;
+	const u32 *masks;
+	u8 member;
+
+	masks = dev->info->masks;
+
+	/* enable broadcast storm limit */
+	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+	if (!ksz_is_ksz88x3(dev))
+		ksz8795_set_prio_queue(dev, port, 4);
+
+	/* disable DiffServ priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+
+	/* replace priority */
+	ksz_port_cfg(dev, port, P_802_1P_CTRL,
+		     masks[PORT_802_1P_REMAPPING], false);
+
+	/* enable 802.1p priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
+
+	if (cpu_port) {
+		if (!ksz_is_ksz88x3(dev))
+			ksz8795_cpu_interface_select(dev, port);
+
+		member = dsa_user_ports(ds);
+	} else {
+		member = BIT(dsa_upstream_port(ds, port));
+	}
+
+	ksz8_cfg_port_member(dev, port, member);
+}
+
+void ksz8_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
+	const u32 *masks;
+	const u16 *regs;
+	u8 remote;
+	int i;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true);
+
+	ksz8_port_setup(dev, dev->cpu_port, true);
+
+	for (i = 0; i < dev->phy_port_cnt; i++) {
+		ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+	}
+	for (i = 0; i < dev->phy_port_cnt; i++) {
+		p = &dev->ports[i];
+
+		if (!ksz_is_ksz88x3(dev)) {
+			ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
+			if (remote & KSZ8_PORT_FIBER_MODE)
+				p->fiber = 1;
+		}
+		if (p->fiber)
+			ksz_port_cfg(dev, i, regs[P_STP_CTRL],
+				     PORT_FORCE_FLOW_CTRL, true);
+		else
+			ksz_port_cfg(dev, i, regs[P_STP_CTRL],
+				     PORT_FORCE_FLOW_CTRL, false);
+	}
+}
+
+static int ksz8_handle_global_errata(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret = 0;
+
+	/* KSZ87xx Errata DS80000687C.
+	 * Module 2: Link drops with some EEE link partners.
+	 *   An issue with the EEE next page exchange between the
+	 *   KSZ879x/KSZ877x/KSZ876x and some EEE link partners may result in
+	 *   the link dropping.
+	 */
+	if (dev->info->ksz87xx_eee_link_erratum)
+		ret = ksz8_ind_write8(dev, TABLE_EEE, REG_IND_EEE_GLOB2_HI, 0);
+
+	return ret;
+}
+
+int ksz8_enable_stp_addr(struct ksz_device *dev)
+{
+	struct alu_struct alu;
+
+	/* Setup STP address for STP operation. */
+	memset(&alu, 0, sizeof(alu));
+	ether_addr_copy(alu.mac, eth_stp_addr);
+	alu.is_static = true;
+	alu.is_override = true;
+	alu.port_forward = dev->info->cpu_ports;
+
+	return ksz8_w_sta_mac_table(dev, 0, &alu);
+}
+
+int ksz8_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int i;
+
+	ds->mtu_enforcement_ingress = true;
+
+	/* We rely on software untagging on the CPU port, so that we
+	 * can support both tagged and untagged VLANs
+	 */
+	ds->untag_bridge_pvid = true;
+
+	/* VLAN filtering is partly controlled by the global VLAN
+	 * Enable flag
+	 */
+	ds->vlan_filtering_is_global = true;
+
+	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
+
+	/* Enable automatic fast aging when link changed detected. */
+	ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
+
+	/* Enable aggressive back off algorithm in half duplex mode. */
+	regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1,
+			   SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
+
+	/*
+	 * Make sure unicast VLAN boundary is set as default and
+	 * enable no excessive collision drop.
+	 */
+	regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2,
+			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
+			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
+
+	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false);
+
+	ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+	if (!ksz_is_ksz88x3(dev))
+		ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true);
+
+	for (i = 0; i < (dev->info->num_vlans / 4); i++)
+		ksz8_r_vlan_entries(dev, i);
+
+	return ksz8_handle_global_errata(ds);
+}
+
+void ksz8_get_caps(struct ksz_device *dev, int port,
+		   struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_10 | MAC_100;
+
+	/* Silicon Errata Sheet (DS80000830A):
+	 * "Port 1 does not respond to received flow control PAUSE frames"
+	 * So, disable Pause support on "Port 1" (port == 0) for all ksz88x3
+	 * switches.
+	 */
+	if (!ksz_is_ksz88x3(dev) || port)
+		config->mac_capabilities |= MAC_SYM_PAUSE;
+
+	/* Asym pause is not supported on KSZ8863 and KSZ8873 */
+	if (!ksz_is_ksz88x3(dev))
+		config->mac_capabilities |= MAC_ASYM_PAUSE;
+}
+
+u32 ksz8_get_port_addr(int port, int offset)
+{
+	return PORT_CTRL_ADDR(port, offset);
+}
+
+int ksz8_switch_init(struct ksz_device *dev)
+{
+	dev->cpu_port = fls(dev->info->cpu_ports) - 1;
+	dev->phy_port_cnt = dev->info->port_cnt - 1;
+	dev->port_mask = (BIT(dev->phy_port_cnt) - 1) | dev->info->cpu_ports;
+
+	return 0;
+}
+
+void ksz8_switch_exit(struct ksz_device *dev)
+{
+	ksz8_reset_switch(dev);
+}
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");