Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 271 insertions, 0 deletions

diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
new file mode 100644
index 0000000000..088533663b
--- /dev/null
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/gpio/consumer.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/pcs/pcs-mtk-lynxi.h>
+#include <linux/of_irq.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/regulator/consumer.h>
+#include <net/dsa.h>
+
+#include "mt7530.h"
+
+static int
+mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct mii_bus *bus = context;
+	u16 page, r, lo, hi;
+	int ret;
+
+	page = (reg >> 6) & 0x3ff;
+	r  = (reg >> 2) & 0xf;
+	lo = val & 0xffff;
+	hi = val >> 16;
+
+	/* MT7530 uses 31 as the pseudo port */
+	ret = bus->write(bus, 0x1f, 0x1f, page);
+	if (ret < 0)
+		return ret;
+
+	ret = bus->write(bus, 0x1f, r,  lo);
+	if (ret < 0)
+		return ret;
+
+	ret = bus->write(bus, 0x1f, 0x10, hi);
+	return ret;
+}
+
+static int
+mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct mii_bus *bus = context;
+	u16 page, r, lo, hi;
+	int ret;
+
+	page = (reg >> 6) & 0x3ff;
+	r = (reg >> 2) & 0xf;
+
+	/* MT7530 uses 31 as the pseudo port */
+	ret = bus->write(bus, 0x1f, 0x1f, page);
+	if (ret < 0)
+		return ret;
+
+	lo = bus->read(bus, 0x1f, r);
+	hi = bus->read(bus, 0x1f, 0x10);
+
+	*val = (hi << 16) | (lo & 0xffff);
+
+	return 0;
+}
+
+static void
+mt7530_mdio_regmap_lock(void *mdio_lock)
+{
+	mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mdio_regmap_unlock(void *mdio_lock)
+{
+	mutex_unlock(mdio_lock);
+}
+
+static const struct regmap_bus mt7530_regmap_bus = {
+	.reg_write = mt7530_regmap_write,
+	.reg_read = mt7530_regmap_read,
+};
+
+static int
+mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
+{
+	struct regmap_config *mt7531_pcs_config[2] = {};
+	struct phylink_pcs *pcs;
+	struct regmap *regmap;
+	int i, ret = 0;
+
+	/* MT7531AE has two SGMII units for port 5 and port 6
+	 * MT7531BE has only one SGMII unit for port 6
+	 */
+	for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
+		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
+						    sizeof(struct regmap_config),
+						    GFP_KERNEL);
+		if (!mt7531_pcs_config[i]) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		mt7531_pcs_config[i]->name = i ? "port6" : "port5";
+		mt7531_pcs_config[i]->reg_bits = 16;
+		mt7531_pcs_config[i]->val_bits = 32;
+		mt7531_pcs_config[i]->reg_stride = 4;
+		mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
+		mt7531_pcs_config[i]->max_register = 0x17c;
+		mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
+		mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
+		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
+
+		regmap = devm_regmap_init(priv->dev,
+					  &mt7530_regmap_bus, priv->bus,
+					  mt7531_pcs_config[i]);
+		if (IS_ERR(regmap)) {
+			ret = PTR_ERR(regmap);
+			break;
+		}
+		pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
+					   MT7531_PHYA_CTRL_SIGNAL3, 0);
+		if (!pcs) {
+			ret = -ENXIO;
+			break;
+		}
+		priv->ports[5 + i].sgmii_pcs = pcs;
+	}
+
+	if (ret && i)
+		mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
+
+	return ret;
+}
+
+static const struct of_device_id mt7530_of_match[] = {
+	{ .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
+	{ .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
+	{ .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt7530_of_match);
+
+static int
+mt7530_probe(struct mdio_device *mdiodev)
+{
+	static struct regmap_config *regmap_config;
+	struct mt7530_priv *priv;
+	struct device_node *dn;
+	int ret;
+
+	dn = mdiodev->dev.of_node;
+
+	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->bus = mdiodev->bus;
+	priv->dev = &mdiodev->dev;
+
+	ret = mt7530_probe_common(priv);
+	if (ret)
+		return ret;
+
+	/* Use medatek,mcm property to distinguish hardware type that would
+	 * cause a little bit differences on power-on sequence.
+	 * Not MCM that indicates switch works as the remote standalone
+	 * integrated circuit so the GPIO pin would be used to complete
+	 * the reset, otherwise memory-mapped register accessing used
+	 * through syscon provides in the case of MCM.
+	 */
+	priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
+	if (priv->mcm) {
+		dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
+
+		priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
+		if (IS_ERR(priv->rstc)) {
+			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
+			return PTR_ERR(priv->rstc);
+		}
+	} else {
+		priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
+						      GPIOD_OUT_LOW);
+		if (IS_ERR(priv->reset)) {
+			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
+			return PTR_ERR(priv->reset);
+		}
+	}
+
+	if (priv->id == ID_MT7530) {
+		priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
+		if (IS_ERR(priv->core_pwr))
+			return PTR_ERR(priv->core_pwr);
+
+		priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
+		if (IS_ERR(priv->io_pwr))
+			return PTR_ERR(priv->io_pwr);
+	}
+
+	regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
+				     GFP_KERNEL);
+	if (!regmap_config)
+		return -ENOMEM;
+
+	regmap_config->reg_bits = 16;
+	regmap_config->val_bits = 32;
+	regmap_config->reg_stride = 4;
+	regmap_config->max_register = MT7530_CREV;
+	regmap_config->disable_locking = true;
+	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
+					priv->bus, regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	if (priv->id == ID_MT7531)
+		priv->create_sgmii = mt7531_create_sgmii;
+
+	return dsa_register_switch(priv->ds);
+}
+
+static void
+mt7530_remove(struct mdio_device *mdiodev)
+{
+	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
+	int ret = 0, i;
+
+	if (!priv)
+		return;
+
+	ret = regulator_disable(priv->core_pwr);
+	if (ret < 0)
+		dev_err(priv->dev,
+			"Failed to disable core power: %d\n", ret);
+
+	ret = regulator_disable(priv->io_pwr);
+	if (ret < 0)
+		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
+			ret);
+
+	mt7530_remove_common(priv);
+
+	for (i = 0; i < 2; ++i)
+		mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
+}
+
+static void mt7530_shutdown(struct mdio_device *mdiodev)
+{
+	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+	if (!priv)
+		return;
+
+	dsa_switch_shutdown(priv->ds);
+
+	dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static struct mdio_driver mt7530_mdio_driver = {
+	.probe  = mt7530_probe,
+	.remove = mt7530_remove,
+	.shutdown = mt7530_shutdown,
+	.mdiodrv.driver = {
+		.name = "mt7530-mdio",
+		.of_match_table = mt7530_of_match,
+	},
+};
+
+mdio_module_driver(mt7530_mdio_driver);
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MDIO)");
+MODULE_LICENSE("GPL");