diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/dsa/sja1105 | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
20 files changed, 14644 insertions, 0 deletions
diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig new file mode 100644 index 0000000000..1291bba3f3 --- /dev/null +++ b/drivers/net/dsa/sja1105/Kconfig @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only +config NET_DSA_SJA1105 +tristate "NXP SJA1105 Ethernet switch family support" + depends on NET_DSA && SPI + depends on PTP_1588_CLOCK_OPTIONAL + select NET_DSA_TAG_SJA1105 + select PCS_XPCS + select PACKING + select CRC32 + help + This is the driver for the NXP SJA1105 (5-port) and SJA1110 (10-port) + automotive Ethernet switch family. These are managed over an SPI + interface. Probing is handled based on OF bindings and so is the + linkage to PHYLINK. The driver supports the following revisions: + - SJA1105E (Gen. 1, No TT-Ethernet) + - SJA1105T (Gen. 1, TT-Ethernet) + - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet) + - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet) + - SJA1105R (Gen. 2, SGMII, No TT-Ethernet) + - SJA1105S (Gen. 2, SGMII, TT-Ethernet) + - SJA1110A (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 10 ports) + - SJA1110B (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 9 ports) + - SJA1110C (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 7 ports) + - SJA1110D (Gen. 3, SGMII, TT-Ethernet, no 100base-TX PHY, 7 ports) + +config NET_DSA_SJA1105_PTP + bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch" + depends on NET_DSA_SJA1105 + depends on PTP_1588_CLOCK + help + This enables support for timestamping and PTP clock manipulations in + the SJA1105 DSA driver. + +config NET_DSA_SJA1105_TAS + bool "Support for the Time-Aware Scheduler on NXP SJA1105" + depends on NET_DSA_SJA1105 && NET_SCH_TAPRIO + depends on NET_SCH_TAPRIO=y || NET_DSA_SJA1105=m + depends on NET_DSA_SJA1105_PTP + help + This enables support for the TTEthernet-based egress scheduling + engine in the SJA1105 DSA driver, which is controlled using a + hardware offload of the tc-tqprio qdisc. + +config NET_DSA_SJA1105_VL + bool "Support for Virtual Links on NXP SJA1105" + depends on NET_DSA_SJA1105_TAS + help + This enables support for flow classification using capable devices + (SJA1105T, SJA1105Q, SJA1105S). The following actions are supported: + - redirect, trap, drop + - time-based ingress policing, via the tc-gate action diff --git a/drivers/net/dsa/sja1105/Makefile b/drivers/net/dsa/sja1105/Makefile new file mode 100644 index 0000000000..40d69e6c0b --- /dev/null +++ b/drivers/net/dsa/sja1105/Makefile @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_NET_DSA_SJA1105) += sja1105.o + +sja1105-objs := \ + sja1105_spi.o \ + sja1105_main.o \ + sja1105_mdio.o \ + sja1105_flower.o \ + sja1105_ethtool.o \ + sja1105_devlink.o \ + sja1105_clocking.o \ + sja1105_static_config.o \ + sja1105_dynamic_config.o \ + +ifdef CONFIG_NET_DSA_SJA1105_PTP +sja1105-objs += sja1105_ptp.o +endif + +ifdef CONFIG_NET_DSA_SJA1105_TAS +sja1105-objs += sja1105_tas.o +endif + +ifdef CONFIG_NET_DSA_SJA1105_VL +sja1105-objs += sja1105_vl.o +endif diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h new file mode 100644 index 0000000000..8c66d3bf61 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -0,0 +1,426 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_H +#define _SJA1105_H + +#include <linux/ptp_clock_kernel.h> +#include <linux/timecounter.h> +#include <linux/dsa/sja1105.h> +#include <linux/dsa/8021q.h> +#include <net/dsa.h> +#include <linux/mutex.h> +#include "sja1105_static_config.h" + +#define SJA1105ET_FDB_BIN_SIZE 4 +/* The hardware value is in multiples of 10 ms. + * The passed parameter is in multiples of 1 ms. + */ +#define SJA1105_AGEING_TIME_MS(ms) ((ms) / 10) +#define SJA1105_NUM_L2_POLICERS SJA1110_MAX_L2_POLICING_COUNT + +/* Calculated assuming 1Gbps, where the clock has 125 MHz (8 ns period) + * To avoid floating point operations, we'll multiply the degrees by 10 + * to get a "phase" and get 1 decimal point precision. + */ +#define SJA1105_RGMII_DELAY_PS_TO_PHASE(ps) \ + (((ps) * 360) / 800) +#define SJA1105_RGMII_DELAY_PHASE_TO_PS(phase) \ + ((800 * (phase)) / 360) +#define SJA1105_RGMII_DELAY_PHASE_TO_HW(phase) \ + (((phase) - 738) / 9) +#define SJA1105_RGMII_DELAY_PS_TO_HW(ps) \ + SJA1105_RGMII_DELAY_PHASE_TO_HW(SJA1105_RGMII_DELAY_PS_TO_PHASE(ps)) + +/* Valid range in degrees is a value between 73.8 and 101.7 + * in 0.9 degree increments + */ +#define SJA1105_RGMII_DELAY_MIN_PS \ + SJA1105_RGMII_DELAY_PHASE_TO_PS(738) +#define SJA1105_RGMII_DELAY_MAX_PS \ + SJA1105_RGMII_DELAY_PHASE_TO_PS(1017) + +typedef enum { + SPI_READ = 0, + SPI_WRITE = 1, +} sja1105_spi_rw_mode_t; + +#include "sja1105_tas.h" +#include "sja1105_ptp.h" + +enum sja1105_stats_area { + MAC, + HL1, + HL2, + ETHER, + __MAX_SJA1105_STATS_AREA, +}; + +/* Keeps the different addresses between E/T and P/Q/R/S */ +struct sja1105_regs { + u64 device_id; + u64 prod_id; + u64 status; + u64 port_control; + u64 rgu; + u64 vl_status; + u64 config; + u64 rmii_pll1; + u64 ptppinst; + u64 ptppindur; + u64 ptp_control; + u64 ptpclkval; + u64 ptpclkrate; + u64 ptpclkcorp; + u64 ptpsyncts; + u64 ptpschtm; + u64 ptpegr_ts[SJA1105_MAX_NUM_PORTS]; + u64 pad_mii_tx[SJA1105_MAX_NUM_PORTS]; + u64 pad_mii_rx[SJA1105_MAX_NUM_PORTS]; + u64 pad_mii_id[SJA1105_MAX_NUM_PORTS]; + u64 cgu_idiv[SJA1105_MAX_NUM_PORTS]; + u64 mii_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 mii_rx_clk[SJA1105_MAX_NUM_PORTS]; + u64 mii_ext_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 mii_ext_rx_clk[SJA1105_MAX_NUM_PORTS]; + u64 rgmii_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 rmii_ref_clk[SJA1105_MAX_NUM_PORTS]; + u64 rmii_ext_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 stats[__MAX_SJA1105_STATS_AREA][SJA1105_MAX_NUM_PORTS]; + u64 mdio_100base_tx; + u64 mdio_100base_t1; + u64 pcs_base[SJA1105_MAX_NUM_PORTS]; +}; + +struct sja1105_mdio_private { + struct sja1105_private *priv; +}; + +enum { + SJA1105_SPEED_AUTO, + SJA1105_SPEED_10MBPS, + SJA1105_SPEED_100MBPS, + SJA1105_SPEED_1000MBPS, + SJA1105_SPEED_2500MBPS, + SJA1105_SPEED_MAX, +}; + +enum sja1105_internal_phy_t { + SJA1105_NO_PHY = 0, + SJA1105_PHY_BASE_TX, + SJA1105_PHY_BASE_T1, +}; + +struct sja1105_info { + u64 device_id; + /* Needed for distinction between P and R, and between Q and S + * (since the parts with/without SGMII share the same + * switch core and device_id) + */ + u64 part_no; + /* E/T and P/Q/R/S have partial timestamps of different sizes. + * They must be reconstructed on both families anyway to get the full + * 64-bit values back. + */ + int ptp_ts_bits; + /* Also SPI commands are of different sizes to retrieve + * the egress timestamps. + */ + int ptpegr_ts_bytes; + int num_cbs_shapers; + int max_frame_mem; + int num_ports; + bool multiple_cascade_ports; + /* Every {port, TXQ} has its own CBS shaper */ + bool fixed_cbs_mapping; + enum dsa_tag_protocol tag_proto; + const struct sja1105_dynamic_table_ops *dyn_ops; + const struct sja1105_table_ops *static_ops; + const struct sja1105_regs *regs; + bool can_limit_mcast_flood; + int (*reset_cmd)(struct dsa_switch *ds); + int (*setup_rgmii_delay)(const void *ctx, int port); + /* Prototypes from include/net/dsa.h */ + int (*fdb_add_cmd)(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); + int (*fdb_del_cmd)(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); + void (*ptp_cmd_packing)(u8 *buf, struct sja1105_ptp_cmd *cmd, + enum packing_op op); + bool (*rxtstamp)(struct dsa_switch *ds, int port, struct sk_buff *skb); + void (*txtstamp)(struct dsa_switch *ds, int port, struct sk_buff *skb); + int (*clocking_setup)(struct sja1105_private *priv); + int (*pcs_mdio_read_c45)(struct mii_bus *bus, int phy, int mmd, + int reg); + int (*pcs_mdio_write_c45)(struct mii_bus *bus, int phy, int mmd, + int reg, u16 val); + int (*disable_microcontroller)(struct sja1105_private *priv); + const char *name; + bool supports_mii[SJA1105_MAX_NUM_PORTS]; + bool supports_rmii[SJA1105_MAX_NUM_PORTS]; + bool supports_rgmii[SJA1105_MAX_NUM_PORTS]; + bool supports_sgmii[SJA1105_MAX_NUM_PORTS]; + bool supports_2500basex[SJA1105_MAX_NUM_PORTS]; + enum sja1105_internal_phy_t internal_phy[SJA1105_MAX_NUM_PORTS]; + const u64 port_speed[SJA1105_SPEED_MAX]; +}; + +enum sja1105_key_type { + SJA1105_KEY_BCAST, + SJA1105_KEY_TC, + SJA1105_KEY_VLAN_UNAWARE_VL, + SJA1105_KEY_VLAN_AWARE_VL, +}; + +struct sja1105_key { + enum sja1105_key_type type; + + union { + /* SJA1105_KEY_TC */ + struct { + int pcp; + } tc; + + /* SJA1105_KEY_VLAN_UNAWARE_VL */ + /* SJA1105_KEY_VLAN_AWARE_VL */ + struct { + u64 dmac; + u16 vid; + u16 pcp; + } vl; + }; +}; + +enum sja1105_rule_type { + SJA1105_RULE_BCAST_POLICER, + SJA1105_RULE_TC_POLICER, + SJA1105_RULE_VL, +}; + +enum sja1105_vl_type { + SJA1105_VL_NONCRITICAL, + SJA1105_VL_RATE_CONSTRAINED, + SJA1105_VL_TIME_TRIGGERED, +}; + +struct sja1105_rule { + struct list_head list; + unsigned long cookie; + unsigned long port_mask; + struct sja1105_key key; + enum sja1105_rule_type type; + + /* Action */ + union { + /* SJA1105_RULE_BCAST_POLICER */ + struct { + int sharindx; + } bcast_pol; + + /* SJA1105_RULE_TC_POLICER */ + struct { + int sharindx; + } tc_pol; + + /* SJA1105_RULE_VL */ + struct { + enum sja1105_vl_type type; + unsigned long destports; + int sharindx; + int maxlen; + int ipv; + u64 base_time; + u64 cycle_time; + int num_entries; + struct action_gate_entry *entries; + struct flow_stats stats; + } vl; + }; +}; + +struct sja1105_flow_block { + struct list_head rules; + bool l2_policer_used[SJA1105_NUM_L2_POLICERS]; + int num_virtual_links; +}; + +struct sja1105_private { + struct sja1105_static_config static_config; + int rgmii_rx_delay_ps[SJA1105_MAX_NUM_PORTS]; + int rgmii_tx_delay_ps[SJA1105_MAX_NUM_PORTS]; + phy_interface_t phy_mode[SJA1105_MAX_NUM_PORTS]; + bool fixed_link[SJA1105_MAX_NUM_PORTS]; + unsigned long ucast_egress_floods; + unsigned long bcast_egress_floods; + unsigned long hwts_tx_en; + unsigned long hwts_rx_en; + const struct sja1105_info *info; + size_t max_xfer_len; + struct spi_device *spidev; + struct dsa_switch *ds; + u16 bridge_pvid[SJA1105_MAX_NUM_PORTS]; + u16 tag_8021q_pvid[SJA1105_MAX_NUM_PORTS]; + struct sja1105_flow_block flow_block; + /* Serializes transmission of management frames so that + * the switch doesn't confuse them with one another. + */ + struct mutex mgmt_lock; + /* Serializes accesses to the FDB */ + struct mutex fdb_lock; + /* PTP two-step TX timestamp ID, and its serialization lock */ + spinlock_t ts_id_lock; + u8 ts_id; + /* Serializes access to the dynamic config interface */ + struct mutex dynamic_config_lock; + struct devlink_region **regions; + struct sja1105_cbs_entry *cbs; + struct mii_bus *mdio_base_t1; + struct mii_bus *mdio_base_tx; + struct mii_bus *mdio_pcs; + struct dw_xpcs *xpcs[SJA1105_MAX_NUM_PORTS]; + struct sja1105_ptp_data ptp_data; + struct sja1105_tas_data tas_data; +}; + +#include "sja1105_dynamic_config.h" + +struct sja1105_spi_message { + u64 access; + u64 read_count; + u64 address; +}; + +/* From sja1105_main.c */ +enum sja1105_reset_reason { + SJA1105_VLAN_FILTERING = 0, + SJA1105_AGEING_TIME, + SJA1105_SCHEDULING, + SJA1105_BEST_EFFORT_POLICING, + SJA1105_VIRTUAL_LINKS, +}; + +int sja1105_static_config_reload(struct sja1105_private *priv, + enum sja1105_reset_reason reason); +int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, + struct netlink_ext_ack *extack); +void sja1105_frame_memory_partitioning(struct sja1105_private *priv); + +/* From sja1105_mdio.c */ +int sja1105_mdiobus_register(struct dsa_switch *ds); +void sja1105_mdiobus_unregister(struct dsa_switch *ds); +int sja1105_pcs_mdio_read_c45(struct mii_bus *bus, int phy, int mmd, int reg); +int sja1105_pcs_mdio_write_c45(struct mii_bus *bus, int phy, int mmd, int reg, + u16 val); +int sja1110_pcs_mdio_read_c45(struct mii_bus *bus, int phy, int mmd, int reg); +int sja1110_pcs_mdio_write_c45(struct mii_bus *bus, int phy, int mmd, int reg, + u16 val); + +/* From sja1105_devlink.c */ +int sja1105_devlink_setup(struct dsa_switch *ds); +void sja1105_devlink_teardown(struct dsa_switch *ds); +int sja1105_devlink_info_get(struct dsa_switch *ds, + struct devlink_info_req *req, + struct netlink_ext_ack *extack); + +/* From sja1105_spi.c */ +int sja1105_xfer_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u8 *buf, size_t len); +int sja1105_xfer_u32(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value, + struct ptp_system_timestamp *ptp_sts); +int sja1105_xfer_u64(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value, + struct ptp_system_timestamp *ptp_sts); +int static_config_buf_prepare_for_upload(struct sja1105_private *priv, + void *config_buf, int buf_len); +int sja1105_static_config_upload(struct sja1105_private *priv); +int sja1105_inhibit_tx(const struct sja1105_private *priv, + unsigned long port_bitmap, bool tx_inhibited); + +extern const struct sja1105_info sja1105e_info; +extern const struct sja1105_info sja1105t_info; +extern const struct sja1105_info sja1105p_info; +extern const struct sja1105_info sja1105q_info; +extern const struct sja1105_info sja1105r_info; +extern const struct sja1105_info sja1105s_info; +extern const struct sja1105_info sja1110a_info; +extern const struct sja1105_info sja1110b_info; +extern const struct sja1105_info sja1110c_info; +extern const struct sja1105_info sja1110d_info; + +/* From sja1105_clocking.c */ + +typedef enum { + XMII_MAC = 0, + XMII_PHY = 1, +} sja1105_mii_role_t; + +typedef enum { + XMII_MODE_MII = 0, + XMII_MODE_RMII = 1, + XMII_MODE_RGMII = 2, + XMII_MODE_SGMII = 3, +} sja1105_phy_interface_t; + +int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port); +int sja1110_setup_rgmii_delay(const void *ctx, int port); +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port); +int sja1105_clocking_setup(struct sja1105_private *priv); +int sja1110_disable_microcontroller(struct sja1105_private *priv); + +/* From sja1105_ethtool.c */ +void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data); +void sja1105_get_strings(struct dsa_switch *ds, int port, + u32 stringset, u8 *data); +int sja1105_get_sset_count(struct dsa_switch *ds, int port, int sset); + +/* From sja1105_dynamic_config.c */ +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry); +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep); + +enum sja1105_iotag { + SJA1105_C_TAG = 0, /* Inner VLAN header */ + SJA1105_S_TAG = 1, /* Outer VLAN header */ +}; + +enum sja1110_vlan_type { + SJA1110_VLAN_INVALID = 0, + SJA1110_VLAN_C_TAG = 1, /* Single inner VLAN tag */ + SJA1110_VLAN_S_TAG = 2, /* Single outer VLAN tag */ + SJA1110_VLAN_D_TAG = 3, /* Double tagged, use outer tag for lookup */ +}; + +enum sja1110_shaper_type { + SJA1110_LEAKY_BUCKET_SHAPER = 0, + SJA1110_CBS_SHAPER = 1, +}; + +u8 sja1105et_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid); +int sja1105et_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); +int sja1105et_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); +int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); +int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); + +/* From sja1105_flower.c */ +int sja1105_cls_flower_del(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress); +int sja1105_cls_flower_add(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress); +int sja1105_cls_flower_stats(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress); +void sja1105_flower_setup(struct dsa_switch *ds); +void sja1105_flower_teardown(struct dsa_switch *ds); +struct sja1105_rule *sja1105_rule_find(struct sja1105_private *priv, + unsigned long cookie); + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c new file mode 100644 index 0000000000..e3699f76f6 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -0,0 +1,855 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright 2016-2018 NXP + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include <linux/packing.h> +#include "sja1105.h" + +#define SJA1105_SIZE_CGU_CMD 4 +#define SJA1110_BASE_MCSS_CLK SJA1110_CGU_ADDR(0x70) +#define SJA1110_BASE_TIMER_CLK SJA1110_CGU_ADDR(0x74) + +/* Common structure for CFG_PAD_MIIx_RX and CFG_PAD_MIIx_TX */ +struct sja1105_cfg_pad_mii { + u64 d32_os; + u64 d32_ih; + u64 d32_ipud; + u64 d10_ih; + u64 d10_os; + u64 d10_ipud; + u64 ctrl_os; + u64 ctrl_ih; + u64 ctrl_ipud; + u64 clk_os; + u64 clk_ih; + u64 clk_ipud; +}; + +struct sja1105_cfg_pad_mii_id { + u64 rxc_stable_ovr; + u64 rxc_delay; + u64 rxc_bypass; + u64 rxc_pd; + u64 txc_stable_ovr; + u64 txc_delay; + u64 txc_bypass; + u64 txc_pd; +}; + +/* UM10944 Table 82. + * IDIV_0_C to IDIV_4_C control registers + * (addr. 10000Bh to 10000Fh) + */ +struct sja1105_cgu_idiv { + u64 clksrc; + u64 autoblock; + u64 idiv; + u64 pd; +}; + +/* PLL_1_C control register + * + * SJA1105 E/T: UM10944 Table 81 (address 10000Ah) + * SJA1105 P/Q/R/S: UM11040 Table 116 (address 10000Ah) + */ +struct sja1105_cgu_pll_ctrl { + u64 pllclksrc; + u64 msel; + u64 autoblock; + u64 psel; + u64 direct; + u64 fbsel; + u64 bypass; + u64 pd; +}; + +struct sja1110_cgu_outclk { + u64 clksrc; + u64 autoblock; + u64 pd; +}; + +enum { + CLKSRC_MII0_TX_CLK = 0x00, + CLKSRC_MII0_RX_CLK = 0x01, + CLKSRC_MII1_TX_CLK = 0x02, + CLKSRC_MII1_RX_CLK = 0x03, + CLKSRC_MII2_TX_CLK = 0x04, + CLKSRC_MII2_RX_CLK = 0x05, + CLKSRC_MII3_TX_CLK = 0x06, + CLKSRC_MII3_RX_CLK = 0x07, + CLKSRC_MII4_TX_CLK = 0x08, + CLKSRC_MII4_RX_CLK = 0x09, + CLKSRC_PLL0 = 0x0B, + CLKSRC_PLL1 = 0x0E, + CLKSRC_IDIV0 = 0x11, + CLKSRC_IDIV1 = 0x12, + CLKSRC_IDIV2 = 0x13, + CLKSRC_IDIV3 = 0x14, + CLKSRC_IDIV4 = 0x15, +}; + +/* UM10944 Table 83. + * MIIx clock control registers 1 to 30 + * (addresses 100013h to 100035h) + */ +struct sja1105_cgu_mii_ctrl { + u64 clksrc; + u64 autoblock; + u64 pd; +}; + +static void sja1105_cgu_idiv_packing(void *buf, struct sja1105_cgu_idiv *idiv, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &idiv->clksrc, 28, 24, size, op); + sja1105_packing(buf, &idiv->autoblock, 11, 11, size, op); + sja1105_packing(buf, &idiv->idiv, 5, 2, size, op); + sja1105_packing(buf, &idiv->pd, 0, 0, size, op); +} + +static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port, + bool enabled, int factor) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + struct sja1105_cgu_idiv idiv; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (regs->cgu_idiv[port] == SJA1105_RSV_ADDR) + return 0; + + if (enabled && factor != 1 && factor != 10) { + dev_err(dev, "idiv factor must be 1 or 10\n"); + return -ERANGE; + } + + /* Payload for packed_buf */ + idiv.clksrc = 0x0A; /* 25MHz */ + idiv.autoblock = 1; /* Block clk automatically */ + idiv.idiv = factor - 1; /* Divide by 1 or 10 */ + idiv.pd = enabled ? 0 : 1; /* Power down? */ + sja1105_cgu_idiv_packing(packed_buf, &idiv, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->cgu_idiv[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cgu_mii_control_packing(void *buf, struct sja1105_cgu_mii_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->clksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_mii_role_t role) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_tx_clk; + const int mac_clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + const int phy_clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (regs->mii_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + if (role == XMII_MAC) + clksrc = mac_clk_sources[port]; + else + clksrc = phy_clk_sources[port]; + + /* Payload for packed_buf */ + mii_tx_clk.clksrc = clksrc; + mii_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_tx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_RX_CLK, + CLKSRC_MII1_RX_CLK, + CLKSRC_MII2_RX_CLK, + CLKSRC_MII3_RX_CLK, + CLKSRC_MII4_RX_CLK, + }; + + if (regs->mii_rx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + mii_rx_clk.clksrc = clk_sources[port]; + mii_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_rx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_rx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + if (regs->mii_ext_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + mii_ext_tx_clk.clksrc = clk_sources[port]; + mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_tx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + if (regs->mii_ext_rx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + mii_ext_rx_clk.clksrc = clk_sources[port]; + mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_rx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_ext_rx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_mii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring MII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* If role is MAC, disable IDIV + * If role is PHY, enable IDIV and configure for 1/1 divider + */ + rc = sja1105_cgu_idiv_config(priv, port, (role == XMII_PHY), 1); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_TX_CLK_n + * * If role is MAC, select TX_CLK_n + * * If role is PHY, select IDIV_n + */ + rc = sja1105_cgu_mii_tx_clk_config(priv, port, role); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_RX_CLK_n + * Select RX_CLK_n + */ + rc = sja1105_cgu_mii_rx_clk_config(priv, port); + if (rc < 0) + return rc; + + if (role == XMII_PHY) { + /* Per MII spec, the PHY (which is us) drives the TX_CLK pin */ + + /* Configure CLKSRC of EXT_TX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + + /* Configure CLKSRC of EXT_RX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_rx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static void +sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->pllclksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->msel, 23, 16, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->psel, 9, 8, size, op); + sja1105_packing(buf, &cmd->direct, 7, 7, size, op); + sja1105_packing(buf, &cmd->fbsel, 6, 6, size, op); + sja1105_packing(buf, &cmd->bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv, + int port, u64 speed) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl txc; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (regs->rgmii_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { + clksrc = CLKSRC_PLL0; + } else { + int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, + CLKSRC_IDIV3, CLKSRC_IDIV4}; + clksrc = clk_sources[port]; + } + + /* RGMII: 125MHz for 1000, 25MHz for 100, 2.5MHz for 10 */ + txc.clksrc = clksrc; + /* Autoblock clk while changing clksrc */ + txc.autoblock = 1; + /* Power Down off => enabled */ + txc.pd = 0; + sja1105_cgu_mii_control_packing(packed_buf, &txc, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgmii_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +/* AGU */ +static void +sja1105_cfg_pad_mii_packing(void *buf, struct sja1105_cfg_pad_mii *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->d32_os, 28, 27, size, op); + sja1105_packing(buf, &cmd->d32_ih, 26, 26, size, op); + sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op); + sja1105_packing(buf, &cmd->d10_os, 20, 19, size, op); + sja1105_packing(buf, &cmd->d10_ih, 18, 18, size, op); + sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op); + sja1105_packing(buf, &cmd->ctrl_os, 12, 11, size, op); + sja1105_packing(buf, &cmd->ctrl_ih, 10, 10, size, op); + sja1105_packing(buf, &cmd->ctrl_ipud, 9, 8, size, op); + sja1105_packing(buf, &cmd->clk_os, 4, 3, size, op); + sja1105_packing(buf, &cmd->clk_ih, 2, 2, size, op); + sja1105_packing(buf, &cmd->clk_ipud, 1, 0, size, op); +} + +static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii pad_mii_tx = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (regs->pad_mii_tx[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload */ + pad_mii_tx.d32_os = 3; /* TXD[3:2] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d10_os = 3; /* TXD[1:0] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d32_ipud = 2; /* TXD[3:2] input stage: */ + /* plain input (default) */ + pad_mii_tx.d10_ipud = 2; /* TXD[1:0] input stage: */ + /* plain input (default) */ + pad_mii_tx.ctrl_os = 3; /* TX_CTL / TX_ER output stage */ + pad_mii_tx.ctrl_ipud = 2; /* TX_CTL / TX_ER input stage (default) */ + pad_mii_tx.clk_os = 3; /* TX_CLK output stage */ + pad_mii_tx.clk_ih = 0; /* TX_CLK input hysteresis (default) */ + pad_mii_tx.clk_ipud = 2; /* TX_CLK input stage (default) */ + sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_tx, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_tx[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_cfg_pad_rx_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii pad_mii_rx = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (regs->pad_mii_rx[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload */ + pad_mii_rx.d32_ih = 0; /* RXD[3:2] input stage hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.d32_ipud = 2; /* RXD[3:2] input weak pull-up/down */ + /* plain input (default) */ + pad_mii_rx.d10_ih = 0; /* RXD[1:0] input stage hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.d10_ipud = 2; /* RXD[1:0] input weak pull-up/down */ + /* plain input (default) */ + pad_mii_rx.ctrl_ih = 0; /* RX_DV/CRS_DV/RX_CTL and RX_ER */ + /* input stage hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.ctrl_ipud = 3; /* RX_DV/CRS_DV/RX_CTL and RX_ER */ + /* input stage weak pull-up/down: */ + /* pull-down */ + pad_mii_rx.clk_os = 2; /* RX_CLK/RXC output stage: */ + /* medium noise/fast speed (default) */ + pad_mii_rx.clk_ih = 0; /* RX_CLK/RXC input hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.clk_ipud = 2; /* RX_CLK/RXC input pull-up/down: */ + /* plain input (default) */ + sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_rx, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_rx[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_CGU_CMD; + + sja1105_packing(buf, &cmd->rxc_stable_ovr, 15, 15, size, op); + sja1105_packing(buf, &cmd->rxc_delay, 14, 10, size, op); + sja1105_packing(buf, &cmd->rxc_bypass, 9, 9, size, op); + sja1105_packing(buf, &cmd->rxc_pd, 8, 8, size, op); + sja1105_packing(buf, &cmd->txc_stable_ovr, 7, 7, size, op); + sja1105_packing(buf, &cmd->txc_delay, 6, 2, size, op); + sja1105_packing(buf, &cmd->txc_bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); +} + +static void +sja1110_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_CGU_CMD; + u64 range = 4; + + /* Fields RXC_RANGE and TXC_RANGE select the input frequency range: + * 0 = 2.5MHz + * 1 = 25MHz + * 2 = 50MHz + * 3 = 125MHz + * 4 = Automatically determined by port speed. + * There's no point in defining a structure different than the one for + * SJA1105, so just hardcode the frequency range to automatic, just as + * before. + */ + sja1105_packing(buf, &cmd->rxc_stable_ovr, 26, 26, size, op); + sja1105_packing(buf, &cmd->rxc_delay, 25, 21, size, op); + sja1105_packing(buf, &range, 20, 18, size, op); + sja1105_packing(buf, &cmd->rxc_bypass, 17, 17, size, op); + sja1105_packing(buf, &cmd->rxc_pd, 16, 16, size, op); + sja1105_packing(buf, &cmd->txc_stable_ovr, 10, 10, size, op); + sja1105_packing(buf, &cmd->txc_delay, 9, 5, size, op); + sja1105_packing(buf, &range, 4, 2, size, op); + sja1105_packing(buf, &cmd->txc_bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); +} + +/* The RGMII delay setup procedure is 2-step and gets called upon each + * .phylink_mac_config. Both are strategic. + * The reason is that the RX Tunable Delay Line of the SJA1105 MAC has issues + * with recovering from a frequency change of the link partner's RGMII clock. + * The easiest way to recover from this is to temporarily power down the TDL, + * as it will re-lock at the new frequency afterwards. + */ +int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + int rx_delay = priv->rgmii_rx_delay_ps[port]; + int tx_delay = priv->rgmii_tx_delay_ps[port]; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int rc; + + if (rx_delay) + pad_mii_id.rxc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(rx_delay); + if (tx_delay) + pad_mii_id.txc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(tx_delay); + + /* Stage 1: Turn the RGMII delay lines off. */ + pad_mii_id.rxc_bypass = 1; + pad_mii_id.rxc_pd = 1; + pad_mii_id.txc_bypass = 1; + pad_mii_id.txc_pd = 1; + sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) + return rc; + + /* Stage 2: Turn the RGMII delay lines on. */ + if (rx_delay) { + pad_mii_id.rxc_bypass = 0; + pad_mii_id.rxc_pd = 0; + } + if (tx_delay) { + pad_mii_id.txc_bypass = 0; + pad_mii_id.txc_pd = 0; + } + sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +int sja1110_setup_rgmii_delay(const void *ctx, int port) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + int rx_delay = priv->rgmii_rx_delay_ps[port]; + int tx_delay = priv->rgmii_tx_delay_ps[port]; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + pad_mii_id.rxc_pd = 1; + pad_mii_id.txc_pd = 1; + + if (rx_delay) { + pad_mii_id.rxc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(rx_delay); + /* The "BYPASS" bit in SJA1110 is actually a "don't bypass" */ + pad_mii_id.rxc_bypass = 1; + pad_mii_id.rxc_pd = 0; + } + + if (tx_delay) { + pad_mii_id.txc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(tx_delay); + pad_mii_id.txc_bypass = 1; + pad_mii_id.txc_pd = 0; + } + + sja1110_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + struct sja1105_mac_config_entry *mac; + u64 speed; + int rc; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + speed = mac[port].speed; + + dev_dbg(dev, "Configuring port %d RGMII at speed %lldMbps\n", + port, speed); + + if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { + /* 1000Mbps, IDIV disabled (125 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + } else if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) { + /* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 1); + } else if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) { + /* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 10); + } else if (speed == priv->info->port_speed[SJA1105_SPEED_AUTO]) { + /* Skip CGU configuration if there is no speed available + * (e.g. link is not established yet) + */ + dev_dbg(dev, "Speed not available, skipping CGU config\n"); + return 0; + } else { + rc = -EINVAL; + } + + if (rc < 0) { + dev_err(dev, "Failed to configure idiv\n"); + return rc; + } + rc = sja1105_cgu_rgmii_tx_clk_config(priv, port, speed); + if (rc < 0) { + dev_err(dev, "Failed to configure RGMII Tx clock\n"); + return rc; + } + rc = sja1105_rgmii_cfg_pad_tx_config(priv, port); + if (rc < 0) { + dev_err(dev, "Failed to configure Tx pad registers\n"); + return rc; + } + + if (!priv->info->setup_rgmii_delay) + return 0; + + return priv->info->setup_rgmii_delay(priv, port); +} + +static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ref_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + + if (regs->rmii_ref_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + ref_clk.clksrc = clk_sources[port]; + ref_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ref_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ref_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_ref_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (regs->rmii_ext_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + ext_tx_clk.clksrc = CLKSRC_PLL1; + ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ext_tx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_pll_ctrl pll = {0}; + struct device *dev = priv->ds->dev; + int rc; + + if (regs->rmii_pll1 == SJA1105_RSV_ADDR) + return 0; + + /* PLL1 must be enabled and output 50 Mhz. + * This is done by writing first 0x0A010941 to + * the PLL_1_C register and then deasserting + * power down (PD) 0x0A010940. + */ + + /* Step 1: PLL1 setup for 50Mhz */ + pll.pllclksrc = 0xA; + pll.msel = 0x1; + pll.autoblock = 0x1; + pll.psel = 0x1; + pll.direct = 0x0; + pll.fbsel = 0x1; + pll.bypass = 0x0; + pll.pd = 0x1; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_pll1, packed_buf, + SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to configure PLL1 for 50MHz\n"); + return rc; + } + + /* Step 2: Enable PLL1 */ + pll.pd = 0x0; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_pll1, packed_buf, + SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to enable PLL1\n"); + return rc; + } + return rc; +} + +static int sja1105_rmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring RMII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* AH1601.pdf chapter 2.5.1. Sources */ + if (role == XMII_MAC) { + /* Configure and enable PLL1 for 50Mhz output */ + rc = sja1105_cgu_rmii_pll_config(priv); + if (rc < 0) + return rc; + } + /* Disable IDIV for this port */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + if (rc < 0) + return rc; + /* Source to sink mappings */ + rc = sja1105_cgu_rmii_ref_clk_config(priv, port); + if (rc < 0) + return rc; + if (role == XMII_MAC) { + rc = sja1105_cgu_rmii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port) +{ + struct sja1105_xmii_params_entry *mii; + struct device *dev = priv->ds->dev; + sja1105_phy_interface_t phy_mode; + sja1105_mii_role_t role; + int rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + /* RGMII etc */ + phy_mode = mii->xmii_mode[port]; + /* MAC or PHY, for applicable types (not RGMII) */ + role = mii->phy_mac[port]; + + switch (phy_mode) { + case XMII_MODE_MII: + rc = sja1105_mii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RMII: + rc = sja1105_rmii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RGMII: + rc = sja1105_rgmii_clocking_setup(priv, port, role); + break; + case XMII_MODE_SGMII: + /* Nothing to do in the CGU for SGMII */ + rc = 0; + break; + default: + dev_err(dev, "Invalid interface mode specified: %d\n", + phy_mode); + return -EINVAL; + } + if (rc) { + dev_err(dev, "Clocking setup for port %d failed: %d\n", + port, rc); + return rc; + } + + /* Internally pull down the RX_DV/CRS_DV/RX_CTL and RX_ER inputs */ + return sja1105_cfg_pad_rx_config(priv, port); +} + +int sja1105_clocking_setup(struct sja1105_private *priv) +{ + struct dsa_switch *ds = priv->ds; + int port, rc; + + for (port = 0; port < ds->num_ports; port++) { + rc = sja1105_clocking_setup_port(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static void +sja1110_cgu_outclk_packing(void *buf, struct sja1110_cgu_outclk *outclk, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &outclk->clksrc, 27, 24, size, op); + sja1105_packing(buf, &outclk->autoblock, 11, 11, size, op); + sja1105_packing(buf, &outclk->pd, 0, 0, size, op); +} + +int sja1110_disable_microcontroller(struct sja1105_private *priv) +{ + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1110_cgu_outclk outclk_6_c = { + .clksrc = 0x3, + .pd = true, + }; + struct sja1110_cgu_outclk outclk_7_c = { + .clksrc = 0x5, + .pd = true, + }; + int rc; + + /* Power down the BASE_TIMER_CLK to disable the watchdog timer */ + sja1110_cgu_outclk_packing(packed_buf, &outclk_7_c, PACK); + + rc = sja1105_xfer_buf(priv, SPI_WRITE, SJA1110_BASE_TIMER_CLK, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc) + return rc; + + /* Power down the BASE_MCSS_CLOCK to gate the microcontroller off */ + sja1110_cgu_outclk_packing(packed_buf, &outclk_6_c, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, SJA1110_BASE_MCSS_CLK, + packed_buf, SJA1105_SIZE_CGU_CMD); +} diff --git a/drivers/net/dsa/sja1105/sja1105_devlink.c b/drivers/net/dsa/sja1105/sja1105_devlink.c new file mode 100644 index 0000000000..30b1f1ba76 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_devlink.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + * Copyright 2020 NXP + */ +#include "sja1105.h" + +/* Since devlink regions have a fixed size and the static config has a variable + * size, we need to calculate the maximum possible static config size by + * creating a dummy config with all table entries populated to the max, and get + * its packed length. This is done dynamically as opposed to simply hardcoding + * a number, since currently not all static config tables are implemented, so + * we are avoiding a possible code desynchronization. + */ +static size_t sja1105_static_config_get_max_size(struct sja1105_private *priv) +{ + struct sja1105_static_config config; + enum sja1105_blk_idx blk_idx; + int rc; + + rc = sja1105_static_config_init(&config, + priv->info->static_ops, + priv->info->device_id); + if (rc) + return 0; + + for (blk_idx = 0; blk_idx < BLK_IDX_MAX; blk_idx++) { + struct sja1105_table *table = &config.tables[blk_idx]; + + table->entry_count = table->ops->max_entry_count; + } + + return sja1105_static_config_get_length(&config); +} + +static int +sja1105_region_static_config_snapshot(struct devlink *dl, + const struct devlink_region_ops *ops, + struct netlink_ext_ack *extack, + u8 **data) +{ + struct dsa_switch *ds = dsa_devlink_to_ds(dl); + struct sja1105_private *priv = ds->priv; + size_t max_len, len; + + len = sja1105_static_config_get_length(&priv->static_config); + max_len = sja1105_static_config_get_max_size(priv); + + *data = kcalloc(max_len, sizeof(u8), GFP_KERNEL); + if (!*data) + return -ENOMEM; + + return static_config_buf_prepare_for_upload(priv, *data, len); +} + +static struct devlink_region_ops sja1105_region_static_config_ops = { + .name = "static-config", + .snapshot = sja1105_region_static_config_snapshot, + .destructor = kfree, +}; + +enum sja1105_region_id { + SJA1105_REGION_STATIC_CONFIG = 0, +}; + +struct sja1105_region { + const struct devlink_region_ops *ops; + size_t (*get_size)(struct sja1105_private *priv); +}; + +static struct sja1105_region sja1105_regions[] = { + [SJA1105_REGION_STATIC_CONFIG] = { + .ops = &sja1105_region_static_config_ops, + .get_size = sja1105_static_config_get_max_size, + }, +}; + +static int sja1105_setup_devlink_regions(struct dsa_switch *ds) +{ + int i, num_regions = ARRAY_SIZE(sja1105_regions); + struct sja1105_private *priv = ds->priv; + const struct devlink_region_ops *ops; + struct devlink_region *region; + u64 size; + + priv->regions = kcalloc(num_regions, sizeof(struct devlink_region *), + GFP_KERNEL); + if (!priv->regions) + return -ENOMEM; + + for (i = 0; i < num_regions; i++) { + size = sja1105_regions[i].get_size(priv); + ops = sja1105_regions[i].ops; + + region = dsa_devlink_region_create(ds, ops, 1, size); + if (IS_ERR(region)) { + while (--i >= 0) + dsa_devlink_region_destroy(priv->regions[i]); + + kfree(priv->regions); + return PTR_ERR(region); + } + + priv->regions[i] = region; + } + + return 0; +} + +static void sja1105_teardown_devlink_regions(struct dsa_switch *ds) +{ + int i, num_regions = ARRAY_SIZE(sja1105_regions); + struct sja1105_private *priv = ds->priv; + + for (i = 0; i < num_regions; i++) + dsa_devlink_region_destroy(priv->regions[i]); + + kfree(priv->regions); +} + +int sja1105_devlink_info_get(struct dsa_switch *ds, + struct devlink_info_req *req, + struct netlink_ext_ack *extack) +{ + struct sja1105_private *priv = ds->priv; + + return devlink_info_version_fixed_put(req, + DEVLINK_INFO_VERSION_GENERIC_ASIC_ID, + priv->info->name); +} + +int sja1105_devlink_setup(struct dsa_switch *ds) +{ + return sja1105_setup_devlink_regions(ds); +} + +void sja1105_devlink_teardown(struct dsa_switch *ds) +{ + sja1105_teardown_devlink_regions(ds); +} diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c new file mode 100644 index 0000000000..984c0e604e --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -0,0 +1,1413 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105.h" + +/* In the dynamic configuration interface, the switch exposes a register-like + * view of some of the static configuration tables. + * Many times the field organization of the dynamic tables is abbreviated (not + * all fields are dynamically reconfigurable) and different from the static + * ones, but the key reason for having it is that we can spare a switch reset + * for settings that can be changed dynamically. + * + * This file creates a per-switch-family abstraction called + * struct sja1105_dynamic_table_ops and two operations that work with it: + * - sja1105_dynamic_config_write + * - sja1105_dynamic_config_read + * + * Compared to the struct sja1105_table_ops from sja1105_static_config.c, + * the dynamic accessors work with a compound buffer: + * + * packed_buf + * + * | + * V + * +-----------------------------------------+------------------+ + * | ENTRY BUFFER | COMMAND BUFFER | + * +-----------------------------------------+------------------+ + * + * <----------------------- packed_size ------------------------> + * + * The ENTRY BUFFER may or may not have the same layout, or size, as its static + * configuration table entry counterpart. When it does, the same packing + * function is reused (bar exceptional cases - see + * sja1105pqrs_dyn_l2_lookup_entry_packing). + * + * The reason for the COMMAND BUFFER being at the end is to be able to send + * a dynamic write command through a single SPI burst. By the time the switch + * reacts to the command, the ENTRY BUFFER is already populated with the data + * sent by the core. + * + * The COMMAND BUFFER is always SJA1105_SIZE_DYN_CMD bytes (one 32-bit word) in + * size. + * + * Sometimes the ENTRY BUFFER does not really exist (when the number of fields + * that can be reconfigured is small), then the switch repurposes some of the + * unused 32 bits of the COMMAND BUFFER to hold ENTRY data. + * + * The key members of struct sja1105_dynamic_table_ops are: + * - .entry_packing: A function that deals with packing an ENTRY structure + * into an SPI buffer, or retrieving an ENTRY structure + * from one. + * The @packed_buf pointer it's given does always point to + * the ENTRY portion of the buffer. + * - .cmd_packing: A function that deals with packing/unpacking the COMMAND + * structure to/from the SPI buffer. + * It is given the same @packed_buf pointer as .entry_packing, + * so most of the time, the @packed_buf points *behind* the + * COMMAND offset inside the buffer. + * To access the COMMAND portion of the buffer, the function + * knows its correct offset. + * Giving both functions the same pointer is handy because in + * extreme cases (see sja1105pqrs_dyn_l2_lookup_entry_packing) + * the .entry_packing is able to jump to the COMMAND portion, + * or vice-versa (sja1105pqrs_l2_lookup_cmd_packing). + * - .access: A bitmap of: + * OP_READ: Set if the hardware manual marks the ENTRY portion of the + * dynamic configuration table buffer as R (readable) after + * an SPI read command (the switch will populate the buffer). + * OP_WRITE: Set if the manual marks the ENTRY portion of the dynamic + * table buffer as W (writable) after an SPI write command + * (the switch will read the fields provided in the buffer). + * OP_DEL: Set if the manual says the VALIDENT bit is supported in the + * COMMAND portion of this dynamic config buffer (i.e. the + * specified entry can be invalidated through a SPI write + * command). + * OP_SEARCH: Set if the manual says that the index of an entry can + * be retrieved in the COMMAND portion of the buffer based + * on its ENTRY portion, as a result of a SPI write command. + * Only the TCAM-based FDB table on SJA1105 P/Q/R/S supports + * this. + * OP_VALID_ANYWAY: Reading some tables through the dynamic config + * interface is possible even if the VALIDENT bit is not + * set in the writeback. So don't error out in that case. + * - .max_entry_count: The number of entries, counting from zero, that can be + * reconfigured through the dynamic interface. If a static + * table can be reconfigured at all dynamically, this + * number always matches the maximum number of supported + * static entries. + * - .packed_size: The length in bytes of the compound ENTRY + COMMAND BUFFER. + * Note that sometimes the compound buffer may contain holes in + * it (see sja1105_vlan_lookup_cmd_packing). The @packed_buf is + * contiguous however, so @packed_size includes any unused + * bytes. + * - .addr: The base SPI address at which the buffer must be written to the + * switch's memory. When looking at the hardware manual, this must + * always match the lowest documented address for the ENTRY, and not + * that of the COMMAND, since the other 32-bit words will follow along + * at the correct addresses. + */ + +#define SJA1105_SIZE_DYN_CMD 4 + +#define SJA1105ET_SIZE_VL_LOOKUP_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105PQRS_SIZE_VL_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_VL_LOOKUP_ENTRY) + +#define SJA1110_SIZE_VL_POLICING_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_VL_POLICING_ENTRY) + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1110_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1110_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + 4 + SJA1105_SIZE_VLAN_LOOKUP_ENTRY) + +#define SJA1110_SIZE_VLAN_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1110_SIZE_VLAN_LOOKUP_ENTRY) + +#define SJA1105_SIZE_L2_FORWARDING_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_FORWARDING_ENTRY) + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY) + +#define SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY) + +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY) + +#define SJA1110_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1110_SIZE_L2_LOOKUP_PARAMS_ENTRY) + +#define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105PQRS_SIZE_GENERAL_PARAMS_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY) + +#define SJA1110_SIZE_GENERAL_PARAMS_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1110_SIZE_GENERAL_PARAMS_ENTRY) + +#define SJA1105PQRS_SIZE_AVB_PARAMS_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY) + +#define SJA1105_SIZE_RETAGGING_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_RETAGGING_ENTRY) + +#define SJA1105ET_SIZE_CBS_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_CBS_ENTRY) + +#define SJA1105PQRS_SIZE_CBS_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_CBS_ENTRY) + +#define SJA1110_SIZE_XMII_PARAMS_DYN_CMD \ + SJA1110_SIZE_XMII_PARAMS_ENTRY + +#define SJA1110_SIZE_L2_POLICING_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_POLICING_ENTRY) + +#define SJA1110_SIZE_L2_FORWARDING_PARAMS_DYN_CMD \ + SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY + +#define SJA1105_MAX_DYN_CMD_SIZE \ + SJA1110_SIZE_GENERAL_PARAMS_DYN_CMD + +struct sja1105_dyn_cmd { + bool search; + u64 valid; + u64 rdwrset; + u64 errors; + u64 valident; + u64 index; +}; + +enum sja1105_hostcmd { + SJA1105_HOSTCMD_SEARCH = 1, + SJA1105_HOSTCMD_READ = 2, + SJA1105_HOSTCMD_WRITE = 3, + SJA1105_HOSTCMD_INVALIDATE = 4, +}; + +/* Command and entry overlap */ +static void +sja1105et_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(buf, &cmd->valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->errors, 30, 30, size, op); + sja1105_packing(buf, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(buf, &cmd->index, 9, 0, size, op); +} + +/* Command and entry are separate */ +static void +sja1105pqrs_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_VL_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 9, 0, size, op); +} + +static void +sja1110_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 11, 0, size, op); +} + +static size_t sja1105et_vl_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_lookup_entry *entry = entry_ptr; + const int size = SJA1105ET_SIZE_VL_LOOKUP_DYN_CMD; + + sja1105_packing(buf, &entry->egrmirr, 21, 17, size, op); + sja1105_packing(buf, &entry->ingrmirr, 16, 16, size, op); + return size; +} + +static void +sja1110_vl_policing_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_VL_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->index, 11, 0, size, op); +} + +static void +sja1105pqrs_common_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op, int entry_size) +{ + const int size = SJA1105_SIZE_DYN_CMD; + u8 *p = buf + entry_size; + u64 hostcmd; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + + /* VALIDENT is supposed to indicate "keep or not", but in SJA1105 E/T, + * using it to delete a management route was unsupported. UM10944 + * said about it: + * + * In case of a write access with the MGMTROUTE flag set, + * the flag will be ignored. It will always be found cleared + * for read accesses with the MGMTROUTE flag set. + * + * SJA1105 P/Q/R/S keeps the same behavior w.r.t. VALIDENT, but there + * is now another flag called HOSTCMD which does more stuff (quoting + * from UM11040): + * + * A write request is accepted only when HOSTCMD is set to write host + * or invalid. A read request is accepted only when HOSTCMD is set to + * search host or read host. + * + * So it is possible to translate a RDWRSET/VALIDENT combination into + * HOSTCMD so that we keep the dynamic command API in place, and + * at the same time achieve compatibility with the management route + * command structure. + */ + if (cmd->rdwrset == SPI_READ) { + if (cmd->search) + hostcmd = SJA1105_HOSTCMD_SEARCH; + else + hostcmd = SJA1105_HOSTCMD_READ; + } else { + /* SPI_WRITE */ + if (cmd->valident) + hostcmd = SJA1105_HOSTCMD_WRITE; + else + hostcmd = SJA1105_HOSTCMD_INVALIDATE; + } + sja1105_packing(p, &hostcmd, 25, 23, size, op); +} + +static void +sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + int entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + + sja1105pqrs_common_l2_lookup_cmd_packing(buf, cmd, op, entry_size); + + /* Hack - The hardware takes the 'index' field within + * struct sja1105_l2_lookup_entry as the index on which this command + * will operate. However it will ignore everything else, so 'index' + * is logically part of command but physically part of entry. + * Populate the 'index' entry field from within the command callback, + * such that our API doesn't need to ask for a full-blown entry + * structure when e.g. a delete is requested. + */ + sja1105_packing(buf, &cmd->index, 15, 6, entry_size, op); +} + +static void +sja1110_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + int entry_size = SJA1110_SIZE_L2_LOOKUP_ENTRY; + + sja1105pqrs_common_l2_lookup_cmd_packing(buf, cmd, op, entry_size); + + sja1105_packing(buf, &cmd->index, 10, 1, entry_size, op); +} + +/* The switch is so retarded that it makes our command/entry abstraction + * crumble apart. + * + * On P/Q/R/S, the switch tries to say whether a FDB entry + * is statically programmed or dynamically learned via a flag called LOCKEDS. + * The hardware manual says about this fiels: + * + * On write will specify the format of ENTRY. + * On read the flag will be found cleared at times the VALID flag is found + * set. The flag will also be found cleared in response to a read having the + * MGMTROUTE flag set. In response to a read with the MGMTROUTE flag + * cleared, the flag be set if the most recent access operated on an entry + * that was either loaded by configuration or through dynamic reconfiguration + * (as opposed to automatically learned entries). + * + * The trouble with this flag is that it's part of the *command* to access the + * dynamic interface, and not part of the *entry* retrieved from it. + * Otherwise said, for a sja1105_dynamic_config_read, LOCKEDS is supposed to be + * an output from the switch into the command buffer, and for a + * sja1105_dynamic_config_write, the switch treats LOCKEDS as an input + * (hence we can write either static, or automatically learned entries, from + * the core). + * But the manual contradicts itself in the last phrase where it says that on + * read, LOCKEDS will be set to 1 for all FDB entries written through the + * dynamic interface (therefore, the value of LOCKEDS from the + * sja1105_dynamic_config_write is not really used for anything, it'll store a + * 1 anyway). + * This means you can't really write a FDB entry with LOCKEDS=0 (automatically + * learned) into the switch, which kind of makes sense. + * As for reading through the dynamic interface, it doesn't make too much sense + * to put LOCKEDS into the command, since the switch will inevitably have to + * ignore it (otherwise a command would be like "read the FDB entry 123, but + * only if it's dynamically learned" <- well how am I supposed to know?) and + * just use it as an output buffer for its findings. But guess what... that's + * what the entry buffer is for! + * Unfortunately, what really breaks this abstraction is the fact that it + * wasn't designed having the fact in mind that the switch can output + * entry-related data as writeback through the command buffer. + * However, whether a FDB entry is statically or dynamically learned *is* part + * of the entry and not the command data, no matter what the switch thinks. + * In order to do that, we'll need to wrap around the + * sja1105pqrs_l2_lookup_entry_packing from sja1105_static_config.c, and take + * a peek outside of the caller-supplied @buf (the entry buffer), to reach the + * command buffer. + */ +static size_t +sja1105pqrs_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_entry *entry = entry_ptr; + u8 *cmd = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op); + + return sja1105pqrs_l2_lookup_entry_packing(buf, entry_ptr, op); +} + +static size_t sja1110_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_entry *entry = entry_ptr; + u8 *cmd = buf + SJA1110_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op); + + return sja1110_l2_lookup_entry_packing(buf, entry_ptr, op); +} + +static void +sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above. */ + sja1105_packing(buf, &cmd->index, 29, 20, + SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op); +} + +static size_t sja1105et_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_entry *entry = entry_ptr; + u8 *cmd = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op); + + return sja1105et_l2_lookup_entry_packing(buf, entry_ptr, op); +} + +static void +sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + u64 mgmtroute = 1; + + sja1105et_l2_lookup_cmd_packing(buf, cmd, op); + if (op == PACK) + sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); +} + +static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_mgmt_entry *entry = entry_ptr; + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + + /* UM10944: To specify if a PTP egress timestamp shall be captured on + * each port upon transmission of the frame, the LSB of VLANID in the + * ENTRY field provided by the host must be set. + * Bit 1 of VLANID then specifies the register where the timestamp for + * this port is stored in. + */ + sja1105_packing(buf, &entry->tsreg, 85, 85, size, op); + sja1105_packing(buf, &entry->takets, 84, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + return size; +} + +static void +sja1105pqrs_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + u64 mgmtroute = 1; + + sja1105pqrs_l2_lookup_cmd_packing(buf, cmd, op); + if (op == PACK) + sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); +} + +static size_t sja1105pqrs_mgmt_route_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_mgmt_entry *entry = entry_ptr; + + /* In P/Q/R/S, enfport got renamed to mgmtvalid, but its purpose + * is the same (driver uses it to confirm that frame was sent). + * So just keep the name from E/T. + */ + sja1105_packing(buf, &entry->tsreg, 71, 71, size, op); + sja1105_packing(buf, &entry->takets, 70, 70, size, op); + sja1105_packing(buf, &entry->macaddr, 69, 22, size, op); + sja1105_packing(buf, &entry->destports, 21, 17, size, op); + sja1105_packing(buf, &entry->enfport, 16, 16, size, op); + return size; +} + +/* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29, + * and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap + * between entry (0x2d, 0x2e) and command (0x30). + */ +static void +sja1105_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_VLAN_LOOKUP_ENTRY + 4; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above, applied for 'vlanid' field of + * struct sja1105_vlan_lookup_entry. + */ + sja1105_packing(buf, &cmd->index, 38, 27, + SJA1105_SIZE_VLAN_LOOKUP_ENTRY, op); +} + +/* In SJA1110 there is no gap between the command and the data, yay... */ +static void +sja1110_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1110_SIZE_VLAN_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + u64 type_entry = 0; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + /* Hack: treat 'vlanid' field of struct sja1105_vlan_lookup_entry as + * cmd->index. + */ + sja1105_packing(buf, &cmd->index, 38, 27, + SJA1110_SIZE_VLAN_LOOKUP_ENTRY, op); + + /* But the VALIDENT bit has disappeared, now we are supposed to + * invalidate an entry through the TYPE_ENTRY field of the entry.. + * This is a hack to transform the non-zero quality of the TYPE_ENTRY + * field into a VALIDENT bit. + */ + if (op == PACK && !cmd->valident) { + sja1105_packing(buf, &type_entry, 40, 39, + SJA1110_SIZE_VLAN_LOOKUP_ENTRY, PACK); + } else if (op == UNPACK) { + sja1105_packing(buf, &type_entry, 40, 39, + SJA1110_SIZE_VLAN_LOOKUP_ENTRY, UNPACK); + cmd->valident = !!type_entry; + } +} + +static void +sja1105_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 4, 0, size, op); +} + +static void +sja1110_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 4, 0, size, op); +} + +static void +sja1105et_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_DYN_CMD; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + + sja1105_packing(reg1, &cmd->valid, 31, 31, size, op); + sja1105_packing(reg1, &cmd->index, 26, 24, size, op); +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + u8 *reg2 = buf; + + sja1105_packing(reg1, &entry->speed, 30, 29, size, op); + sja1105_packing(reg1, &entry->drpdtag, 23, 23, size, op); + sja1105_packing(reg1, &entry->drpuntag, 22, 22, size, op); + sja1105_packing(reg1, &entry->retag, 21, 21, size, op); + sja1105_packing(reg1, &entry->dyn_learn, 20, 20, size, op); + sja1105_packing(reg1, &entry->egress, 19, 19, size, op); + sja1105_packing(reg1, &entry->ingress, 18, 18, size, op); + sja1105_packing(reg1, &entry->ing_mirr, 17, 17, size, op); + sja1105_packing(reg1, &entry->egr_mirr, 16, 16, size, op); + sja1105_packing(reg1, &entry->vlanprio, 14, 12, size, op); + sja1105_packing(reg1, &entry->vlanid, 11, 0, size, op); + sja1105_packing(reg2, &entry->tp_delin, 31, 16, size, op); + sja1105_packing(reg2, &entry->tp_delout, 15, 0, size, op); + /* MAC configuration table entries which can't be reconfigured: + * top, base, enabled, ifg, maxage, drpnona664 + */ + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105pqrs_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 2, 0, size, op); +} + +static void +sja1110_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 3, 0, size, op); +} + +static void +sja1105et_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + sja1105_packing(buf, &cmd->valid, 31, 31, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->poly, 7, 0, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105pqrs_l2_lookup_params_cmd_packing(void *buf, + struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); +} + +static void +sja1110_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1110_SIZE_L2_LOOKUP_PARAMS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); +} + +static void +sja1105et_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &cmd->valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->errors, 30, 30, size, op); +} + +static size_t +sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_general_params_entry *entry = entry_ptr; + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &entry->mirr_port, 2, 0, size, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105pqrs_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 28, 28, size, op); +} + +static void +sja1110_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1110_SIZE_GENERAL_PARAMS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); +} + +static void +sja1105pqrs_avb_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); +} + +static void +sja1105_retagging_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_RETAGGING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->valident, 29, 29, size, op); + sja1105_packing(p, &cmd->rdwrset, 28, 28, size, op); + sja1105_packing(p, &cmd->index, 5, 0, size, op); +} + +static void +sja1110_retagging_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_RETAGGING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 28, 28, size, op); + sja1105_packing(p, &cmd->index, 4, 0, size, op); +} + +static void sja1105et_cbs_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_CBS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->index, 19, 16, size, op); +} + +static size_t sja1105et_cbs_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_CBS_ENTRY; + struct sja1105_cbs_entry *entry = entry_ptr; + u8 *cmd = buf + size; + u32 *p = buf; + + sja1105_packing(cmd, &entry->port, 5, 3, SJA1105_SIZE_DYN_CMD, op); + sja1105_packing(cmd, &entry->prio, 2, 0, SJA1105_SIZE_DYN_CMD, op); + sja1105_packing(p + 3, &entry->credit_lo, 31, 0, size, op); + sja1105_packing(p + 2, &entry->credit_hi, 31, 0, size, op); + sja1105_packing(p + 1, &entry->send_slope, 31, 0, size, op); + sja1105_packing(p + 0, &entry->idle_slope, 31, 0, size, op); + return size; +} + +static void sja1105pqrs_cbs_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_CBS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 3, 0, size, op); +} + +static void sja1110_cbs_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_CBS_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 7, 0, size, op); +} + +static size_t sja1105pqrs_cbs_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_CBS_ENTRY; + struct sja1105_cbs_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->port, 159, 157, size, op); + sja1105_packing(buf, &entry->prio, 156, 154, size, op); + sja1105_packing(buf, &entry->credit_lo, 153, 122, size, op); + sja1105_packing(buf, &entry->credit_hi, 121, 90, size, op); + sja1105_packing(buf, &entry->send_slope, 89, 58, size, op); + sja1105_packing(buf, &entry->idle_slope, 57, 26, size, op); + return size; +} + +static size_t sja1110_cbs_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_CBS_ENTRY; + struct sja1105_cbs_entry *entry = entry_ptr; + u64 entry_type = SJA1110_CBS_SHAPER; + + sja1105_packing(buf, &entry_type, 159, 159, size, op); + sja1105_packing(buf, &entry->credit_lo, 151, 120, size, op); + sja1105_packing(buf, &entry->credit_hi, 119, 88, size, op); + sja1105_packing(buf, &entry->send_slope, 87, 56, size, op); + sja1105_packing(buf, &entry->idle_slope, 55, 24, size, op); + return size; +} + +static void sja1110_dummy_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ +} + +static void +sja1110_l2_policing_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_L2_POLICING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 6, 0, size, op); +} + +#define OP_READ BIT(0) +#define OP_WRITE BIT(1) +#define OP_DEL BIT(2) +#define OP_SEARCH BIT(3) +#define OP_VALID_ANYWAY BIT(4) + +/* SJA1105E/T: First generation */ +const struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_VL_LOOKUP] = { + .entry_packing = sja1105et_vl_lookup_entry_packing, + .cmd_packing = sja1105et_vl_lookup_cmd_packing, + .access = OP_WRITE, + .max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT, + .packed_size = SJA1105ET_SIZE_VL_LOOKUP_DYN_CMD, + .addr = 0x35, + }, + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105et_dyn_l2_lookup_entry_packing, + .cmd_packing = sja1105et_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_MGMT_ROUTE] = { + .entry_packing = sja1105et_mgmt_route_entry_packing, + .cmd_packing = sja1105et_mgmt_route_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .max_entry_count = SJA1105_NUM_PORTS, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x27, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105et_mac_config_entry_packing, + .cmd_packing = sja1105et_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x36, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105et_l2_lookup_params_entry_packing, + .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105et_general_params_entry_packing, + .cmd_packing = sja1105et_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x34, + }, + [BLK_IDX_RETAGGING] = { + .entry_packing = sja1105_retagging_entry_packing, + .cmd_packing = sja1105_retagging_cmd_packing, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + .access = (OP_WRITE | OP_DEL), + .packed_size = SJA1105_SIZE_RETAGGING_DYN_CMD, + .addr = 0x31, + }, + [BLK_IDX_CBS] = { + .entry_packing = sja1105et_cbs_entry_packing, + .cmd_packing = sja1105et_cbs_cmd_packing, + .max_entry_count = SJA1105ET_MAX_CBS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_CBS_DYN_CMD, + .addr = 0x2c, + }, +}; + +/* SJA1105P/Q/R/S: Second generation */ +const struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_VL_LOOKUP] = { + .entry_packing = sja1105_vl_lookup_entry_packing, + .cmd_packing = sja1105pqrs_vl_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE), + .max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT, + .packed_size = SJA1105PQRS_SIZE_VL_LOOKUP_DYN_CMD, + .addr = 0x47, + }, + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105pqrs_dyn_l2_lookup_entry_packing, + .cmd_packing = sja1105pqrs_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_MGMT_ROUTE] = { + .entry_packing = sja1105pqrs_mgmt_route_entry_packing, + .cmd_packing = sja1105pqrs_mgmt_route_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH | OP_VALID_ANYWAY), + .max_entry_count = SJA1105_NUM_PORTS, + .packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x2D, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x2A, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105pqrs_mac_config_entry_packing, + .cmd_packing = sja1105pqrs_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x4B, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105pqrs_l2_lookup_params_entry_packing, + .cmd_packing = sja1105pqrs_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x54, + }, + [BLK_IDX_AVB_PARAMS] = { + .entry_packing = sja1105pqrs_avb_params_entry_packing, + .cmd_packing = sja1105pqrs_avb_params_cmd_packing, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105PQRS_SIZE_AVB_PARAMS_DYN_CMD, + .addr = 0x8003, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105pqrs_general_params_entry_packing, + .cmd_packing = sja1105pqrs_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x3B, + }, + [BLK_IDX_RETAGGING] = { + .entry_packing = sja1105_retagging_entry_packing, + .cmd_packing = sja1105_retagging_cmd_packing, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + .access = (OP_READ | OP_WRITE | OP_DEL), + .packed_size = SJA1105_SIZE_RETAGGING_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_CBS] = { + .entry_packing = sja1105pqrs_cbs_entry_packing, + .cmd_packing = sja1105pqrs_cbs_cmd_packing, + .max_entry_count = SJA1105PQRS_MAX_CBS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105PQRS_SIZE_CBS_DYN_CMD, + .addr = 0x32, + }, +}; + +/* SJA1110: Third generation */ +const struct sja1105_dynamic_table_ops sja1110_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_VL_LOOKUP] = { + .entry_packing = sja1110_vl_lookup_entry_packing, + .cmd_packing = sja1110_vl_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .max_entry_count = SJA1110_MAX_VL_LOOKUP_COUNT, + .packed_size = SJA1105PQRS_SIZE_VL_LOOKUP_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x124), + }, + [BLK_IDX_VL_POLICING] = { + .entry_packing = sja1110_vl_policing_entry_packing, + .cmd_packing = sja1110_vl_policing_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .max_entry_count = SJA1110_MAX_VL_POLICING_COUNT, + .packed_size = SJA1110_SIZE_VL_POLICING_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x310), + }, + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1110_dyn_l2_lookup_entry_packing, + .cmd_packing = sja1110_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1110_SIZE_L2_LOOKUP_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x8c), + }, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1110_vlan_lookup_entry_packing, + .cmd_packing = sja1110_vlan_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1110_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0xb4), + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1110_l2_forwarding_entry_packing, + .cmd_packing = sja1110_l2_forwarding_cmd_packing, + .max_entry_count = SJA1110_MAX_L2_FORWARDING_COUNT, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0xa8), + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1110_mac_config_entry_packing, + .cmd_packing = sja1110_mac_config_cmd_packing, + .max_entry_count = SJA1110_MAX_MAC_CONFIG_COUNT, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x134), + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1110_l2_lookup_params_entry_packing, + .cmd_packing = sja1110_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .packed_size = SJA1110_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x158), + }, + [BLK_IDX_AVB_PARAMS] = { + .entry_packing = sja1105pqrs_avb_params_entry_packing, + .cmd_packing = sja1105pqrs_avb_params_cmd_packing, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .packed_size = SJA1105PQRS_SIZE_AVB_PARAMS_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x2000C), + }, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1110_general_params_entry_packing, + .cmd_packing = sja1110_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .packed_size = SJA1110_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0xe8), + }, + [BLK_IDX_RETAGGING] = { + .entry_packing = sja1110_retagging_entry_packing, + .cmd_packing = sja1110_retagging_cmd_packing, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + .access = (OP_READ | OP_WRITE | OP_DEL), + .packed_size = SJA1105_SIZE_RETAGGING_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0xdc), + }, + [BLK_IDX_CBS] = { + .entry_packing = sja1110_cbs_entry_packing, + .cmd_packing = sja1110_cbs_cmd_packing, + .max_entry_count = SJA1110_MAX_CBS_COUNT, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .packed_size = SJA1105PQRS_SIZE_CBS_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0xc4), + }, + [BLK_IDX_XMII_PARAMS] = { + .entry_packing = sja1110_xmii_params_entry_packing, + .cmd_packing = sja1110_dummy_cmd_packing, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + .access = (OP_READ | OP_VALID_ANYWAY), + .packed_size = SJA1110_SIZE_XMII_PARAMS_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x3c), + }, + [BLK_IDX_L2_POLICING] = { + .entry_packing = sja1110_l2_policing_entry_packing, + .cmd_packing = sja1110_l2_policing_cmd_packing, + .max_entry_count = SJA1110_MAX_L2_POLICING_COUNT, + .access = (OP_READ | OP_WRITE | OP_VALID_ANYWAY), + .packed_size = SJA1110_SIZE_L2_POLICING_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x2fc), + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .entry_packing = sja1110_l2_forwarding_params_entry_packing, + .cmd_packing = sja1110_dummy_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + .access = (OP_READ | OP_VALID_ANYWAY), + .packed_size = SJA1110_SIZE_L2_FORWARDING_PARAMS_DYN_CMD, + .addr = SJA1110_SPI_ADDR(0x20000), + }, +}; + +#define SJA1105_DYNAMIC_CONFIG_SLEEP_US 10 +#define SJA1105_DYNAMIC_CONFIG_TIMEOUT_US 100000 + +static int +sja1105_dynamic_config_poll_valid(struct sja1105_private *priv, + const struct sja1105_dynamic_table_ops *ops, + void *entry, bool check_valident, + bool check_errors) +{ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {}; + struct sja1105_dyn_cmd cmd = {}; + int rc; + + /* Read back the whole entry + command structure. */ + rc = sja1105_xfer_buf(priv, SPI_READ, ops->addr, packed_buf, + ops->packed_size); + if (rc) + return rc; + + /* Unpack the command structure, and return it to the caller in case it + * needs to perform further checks on it (VALIDENT). + */ + ops->cmd_packing(packed_buf, &cmd, UNPACK); + + /* Hardware hasn't cleared VALID => still working on it */ + if (cmd.valid) + return -EAGAIN; + + if (check_valident && !cmd.valident && !(ops->access & OP_VALID_ANYWAY)) + return -ENOENT; + + if (check_errors && cmd.errors) + return -EINVAL; + + /* Don't dereference possibly NULL pointer - maybe caller + * only wanted to see whether the entry existed or not. + */ + if (entry) + ops->entry_packing(packed_buf, entry, UNPACK); + + return 0; +} + +/* Poll the dynamic config entry's control area until the hardware has + * cleared the VALID bit, which means we have confirmation that it has + * finished processing the command. + */ +static int +sja1105_dynamic_config_wait_complete(struct sja1105_private *priv, + const struct sja1105_dynamic_table_ops *ops, + void *entry, bool check_valident, + bool check_errors) +{ + int err, rc; + + err = read_poll_timeout(sja1105_dynamic_config_poll_valid, + rc, rc != -EAGAIN, + SJA1105_DYNAMIC_CONFIG_SLEEP_US, + SJA1105_DYNAMIC_CONFIG_TIMEOUT_US, + false, priv, ops, entry, check_valident, + check_errors); + return err < 0 ? err : rc; +} + +/* Provides read access to the settings through the dynamic interface + * of the switch. + * @blk_idx is used as key to select from the sja1105_dynamic_table_ops. + * The selection is limited by the hardware in respect to which + * configuration blocks can be read through the dynamic interface. + * @index is used to retrieve a particular table entry. If negative, + * (and if the @blk_idx supports the searching operation) a search + * is performed by the @entry parameter. + * @entry Type-casted to an unpacked structure that holds a table entry + * of the type specified in @blk_idx. + * Usually an output argument. If @index is negative, then this + * argument is used as input/output: it should be pre-populated + * with the element to search for. Entries which support the + * search operation will have an "index" field (not the @index + * argument to this function) and that is where the found index + * will be returned (or left unmodified - thus negative - if not + * found). + */ +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= 0 && index >= ops->max_entry_count) + return -ERANGE; + if (index < 0 && !(ops->access & OP_SEARCH)) + return -EOPNOTSUPP; + if (!(ops->access & OP_READ)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + if (!ops->cmd_packing) + return -EOPNOTSUPP; + if (!ops->entry_packing) + return -EOPNOTSUPP; + + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_READ; /* Action is read */ + if (index < 0) { + /* Avoid copying a signed negative number to an u64 */ + cmd.index = 0; + cmd.search = true; + } else { + cmd.index = index; + cmd.search = false; + } + cmd.valident = true; + ops->cmd_packing(packed_buf, &cmd, PACK); + + if (cmd.search) + ops->entry_packing(packed_buf, entry, PACK); + + /* Send SPI write operation: read config table entry */ + mutex_lock(&priv->dynamic_config_lock); + rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, + ops->packed_size); + if (rc < 0) + goto out; + + rc = sja1105_dynamic_config_wait_complete(priv, ops, entry, true, false); +out: + mutex_unlock(&priv->dynamic_config_lock); + + return rc; +} + +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= ops->max_entry_count) + return -ERANGE; + if (index < 0) + return -ERANGE; + if (!(ops->access & OP_WRITE)) + return -EOPNOTSUPP; + if (!keep && !(ops->access & OP_DEL)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + + cmd.valident = keep; /* If false, deletes entry */ + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_WRITE; /* Action is write */ + cmd.index = index; + + if (!ops->cmd_packing) + return -EOPNOTSUPP; + ops->cmd_packing(packed_buf, &cmd, PACK); + + if (!ops->entry_packing) + return -EOPNOTSUPP; + /* Don't dereference potentially NULL pointer if just + * deleting a table entry is what was requested. For cases + * where 'index' field is physically part of entry structure, + * and needed here, we deal with that in the cmd_packing callback. + */ + if (keep) + ops->entry_packing(packed_buf, entry, PACK); + + /* Send SPI write operation: read config table entry */ + mutex_lock(&priv->dynamic_config_lock); + rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, + ops->packed_size); + if (rc < 0) + goto out; + + rc = sja1105_dynamic_config_wait_complete(priv, ops, NULL, false, true); +out: + mutex_unlock(&priv->dynamic_config_lock); + + return rc; +} + +static u8 sja1105_crc8_add(u8 crc, u8 byte, u8 poly) +{ + int i; + + for (i = 0; i < 8; i++) { + if ((crc ^ byte) & (1 << 7)) { + crc <<= 1; + crc ^= poly; + } else { + crc <<= 1; + } + byte <<= 1; + } + return crc; +} + +/* CRC8 algorithm with non-reversed input, non-reversed output, + * no input xor and no output xor. Code customized for receiving + * the SJA1105 E/T FDB keys (vlanid, macaddr) as input. CRC polynomial + * is also received as argument in the Koopman notation that the switch + * hardware stores it in. + */ +u8 sja1105et_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid) +{ + struct sja1105_l2_lookup_params_entry *l2_lookup_params = + priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS].entries; + u64 input, poly_koopman = l2_lookup_params->poly; + /* Convert polynomial from Koopman to 'normal' notation */ + u8 poly = (u8)(1 + (poly_koopman << 1)); + u8 crc = 0; /* seed */ + int i; + + input = ((u64)vid << 48) | ether_addr_to_u64(addr); + + /* Mask the eight bytes starting from MSB one at a time */ + for (i = 56; i >= 0; i -= 8) { + u8 byte = (input & (0xffull << i)) >> i; + + crc = sja1105_crc8_add(crc, byte, poly); + } + return crc; +} diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.h b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h new file mode 100644 index 0000000000..a1472f80a0 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_DYNAMIC_CONFIG_H +#define _SJA1105_DYNAMIC_CONFIG_H + +#include "sja1105.h" +#include <linux/packing.h> + +/* Special index that can be used for sja1105_dynamic_config_read */ +#define SJA1105_SEARCH -1 + +struct sja1105_dyn_cmd; + +struct sja1105_dynamic_table_ops { + /* This returns size_t just to keep same prototype as the + * static config ops, of which we are reusing some functions. + */ + size_t (*entry_packing)(void *buf, void *entry_ptr, enum packing_op op); + void (*cmd_packing)(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op); + size_t max_entry_count; + size_t packed_size; + u64 addr; + u8 access; +}; + +struct sja1105_mgmt_entry { + u64 tsreg; + u64 takets; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; +}; + +extern const struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN]; +extern const struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN]; +extern const struct sja1105_dynamic_table_ops sja1110_dyn_ops[BLK_IDX_MAX_DYN]; + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_ethtool.c b/drivers/net/dsa/sja1105/sja1105_ethtool.c new file mode 100644 index 0000000000..decc6c931d --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_ethtool.c @@ -0,0 +1,629 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105.h" + +enum sja1105_counter_index { + __SJA1105_COUNTER_UNUSED, + /* MAC */ + N_RUNT, + N_SOFERR, + N_ALIGNERR, + N_MIIERR, + TYPEERR, + SIZEERR, + TCTIMEOUT, + PRIORERR, + NOMASTER, + MEMOV, + MEMERR, + INVTYP, + INTCYOV, + DOMERR, + PCFBAGDROP, + SPCPRIOR, + AGEPRIOR, + PORTDROP, + LENDROP, + BAGDROP, + POLICEERR, + DRPNONA664ERR, + SPCERR, + AGEDRP, + /* HL1 */ + N_N664ERR, + N_VLANERR, + N_UNRELEASED, + N_SIZEERR, + N_CRCERR, + N_VLNOTFOUND, + N_CTPOLERR, + N_POLERR, + N_RXFRM, + N_RXBYTE, + N_TXFRM, + N_TXBYTE, + /* HL2 */ + N_QFULL, + N_PART_DROP, + N_EGR_DISABLED, + N_NOT_REACH, + __MAX_SJA1105ET_PORT_COUNTER, + /* P/Q/R/S only */ + /* ETHER */ + N_DROPS_NOLEARN = __MAX_SJA1105ET_PORT_COUNTER, + N_DROPS_NOROUTE, + N_DROPS_ILL_DTAG, + N_DROPS_DTAG, + N_DROPS_SOTAG, + N_DROPS_SITAG, + N_DROPS_UTAG, + N_TX_BYTES_1024_2047, + N_TX_BYTES_512_1023, + N_TX_BYTES_256_511, + N_TX_BYTES_128_255, + N_TX_BYTES_65_127, + N_TX_BYTES_64, + N_TX_MCAST, + N_TX_BCAST, + N_RX_BYTES_1024_2047, + N_RX_BYTES_512_1023, + N_RX_BYTES_256_511, + N_RX_BYTES_128_255, + N_RX_BYTES_65_127, + N_RX_BYTES_64, + N_RX_MCAST, + N_RX_BCAST, + __MAX_SJA1105PQRS_PORT_COUNTER, +}; + +struct sja1105_port_counter { + enum sja1105_stats_area area; + const char name[ETH_GSTRING_LEN]; + int offset; + int start; + int end; + bool is_64bit; +}; + +static const struct sja1105_port_counter sja1105_port_counters[] = { + /* MAC-Level Diagnostic Counters */ + [N_RUNT] = { + .area = MAC, + .name = "n_runt", + .offset = 0, + .start = 31, + .end = 24, + }, + [N_SOFERR] = { + .area = MAC, + .name = "n_soferr", + .offset = 0x0, + .start = 23, + .end = 16, + }, + [N_ALIGNERR] = { + .area = MAC, + .name = "n_alignerr", + .offset = 0x0, + .start = 15, + .end = 8, + }, + [N_MIIERR] = { + .area = MAC, + .name = "n_miierr", + .offset = 0x0, + .start = 7, + .end = 0, + }, + /* MAC-Level Diagnostic Flags */ + [TYPEERR] = { + .area = MAC, + .name = "typeerr", + .offset = 0x1, + .start = 27, + .end = 27, + }, + [SIZEERR] = { + .area = MAC, + .name = "sizeerr", + .offset = 0x1, + .start = 26, + .end = 26, + }, + [TCTIMEOUT] = { + .area = MAC, + .name = "tctimeout", + .offset = 0x1, + .start = 25, + .end = 25, + }, + [PRIORERR] = { + .area = MAC, + .name = "priorerr", + .offset = 0x1, + .start = 24, + .end = 24, + }, + [NOMASTER] = { + .area = MAC, + .name = "nomaster", + .offset = 0x1, + .start = 23, + .end = 23, + }, + [MEMOV] = { + .area = MAC, + .name = "memov", + .offset = 0x1, + .start = 22, + .end = 22, + }, + [MEMERR] = { + .area = MAC, + .name = "memerr", + .offset = 0x1, + .start = 21, + .end = 21, + }, + [INVTYP] = { + .area = MAC, + .name = "invtyp", + .offset = 0x1, + .start = 19, + .end = 19, + }, + [INTCYOV] = { + .area = MAC, + .name = "intcyov", + .offset = 0x1, + .start = 18, + .end = 18, + }, + [DOMERR] = { + .area = MAC, + .name = "domerr", + .offset = 0x1, + .start = 17, + .end = 17, + }, + [PCFBAGDROP] = { + .area = MAC, + .name = "pcfbagdrop", + .offset = 0x1, + .start = 16, + .end = 16, + }, + [SPCPRIOR] = { + .area = MAC, + .name = "spcprior", + .offset = 0x1, + .start = 15, + .end = 12, + }, + [AGEPRIOR] = { + .area = MAC, + .name = "ageprior", + .offset = 0x1, + .start = 11, + .end = 8, + }, + [PORTDROP] = { + .area = MAC, + .name = "portdrop", + .offset = 0x1, + .start = 6, + .end = 6, + }, + [LENDROP] = { + .area = MAC, + .name = "lendrop", + .offset = 0x1, + .start = 5, + .end = 5, + }, + [BAGDROP] = { + .area = MAC, + .name = "bagdrop", + .offset = 0x1, + .start = 4, + .end = 4, + }, + [POLICEERR] = { + .area = MAC, + .name = "policeerr", + .offset = 0x1, + .start = 3, + .end = 3, + }, + [DRPNONA664ERR] = { + .area = MAC, + .name = "drpnona664err", + .offset = 0x1, + .start = 2, + .end = 2, + }, + [SPCERR] = { + .area = MAC, + .name = "spcerr", + .offset = 0x1, + .start = 1, + .end = 1, + }, + [AGEDRP] = { + .area = MAC, + .name = "agedrp", + .offset = 0x1, + .start = 0, + .end = 0, + }, + /* High-Level Diagnostic Counters */ + [N_N664ERR] = { + .area = HL1, + .name = "n_n664err", + .offset = 0xF, + .start = 31, + .end = 0, + }, + [N_VLANERR] = { + .area = HL1, + .name = "n_vlanerr", + .offset = 0xE, + .start = 31, + .end = 0, + }, + [N_UNRELEASED] = { + .area = HL1, + .name = "n_unreleased", + .offset = 0xD, + .start = 31, + .end = 0, + }, + [N_SIZEERR] = { + .area = HL1, + .name = "n_sizeerr", + .offset = 0xC, + .start = 31, + .end = 0, + }, + [N_CRCERR] = { + .area = HL1, + .name = "n_crcerr", + .offset = 0xB, + .start = 31, + .end = 0, + }, + [N_VLNOTFOUND] = { + .area = HL1, + .name = "n_vlnotfound", + .offset = 0xA, + .start = 31, + .end = 0, + }, + [N_CTPOLERR] = { + .area = HL1, + .name = "n_ctpolerr", + .offset = 0x9, + .start = 31, + .end = 0, + }, + [N_POLERR] = { + .area = HL1, + .name = "n_polerr", + .offset = 0x8, + .start = 31, + .end = 0, + }, + [N_RXFRM] = { + .area = HL1, + .name = "n_rxfrm", + .offset = 0x6, + .start = 31, + .end = 0, + .is_64bit = true, + }, + [N_RXBYTE] = { + .area = HL1, + .name = "n_rxbyte", + .offset = 0x4, + .start = 31, + .end = 0, + .is_64bit = true, + }, + [N_TXFRM] = { + .area = HL1, + .name = "n_txfrm", + .offset = 0x2, + .start = 31, + .end = 0, + .is_64bit = true, + }, + [N_TXBYTE] = { + .area = HL1, + .name = "n_txbyte", + .offset = 0x0, + .start = 31, + .end = 0, + .is_64bit = true, + }, + [N_QFULL] = { + .area = HL2, + .name = "n_qfull", + .offset = 0x3, + .start = 31, + .end = 0, + }, + [N_PART_DROP] = { + .area = HL2, + .name = "n_part_drop", + .offset = 0x2, + .start = 31, + .end = 0, + }, + [N_EGR_DISABLED] = { + .area = HL2, + .name = "n_egr_disabled", + .offset = 0x1, + .start = 31, + .end = 0, + }, + [N_NOT_REACH] = { + .area = HL2, + .name = "n_not_reach", + .offset = 0x0, + .start = 31, + .end = 0, + }, + /* Ether Stats */ + [N_DROPS_NOLEARN] = { + .area = ETHER, + .name = "n_drops_nolearn", + .offset = 0x16, + .start = 31, + .end = 0, + }, + [N_DROPS_NOROUTE] = { + .area = ETHER, + .name = "n_drops_noroute", + .offset = 0x15, + .start = 31, + .end = 0, + }, + [N_DROPS_ILL_DTAG] = { + .area = ETHER, + .name = "n_drops_ill_dtag", + .offset = 0x14, + .start = 31, + .end = 0, + }, + [N_DROPS_DTAG] = { + .area = ETHER, + .name = "n_drops_dtag", + .offset = 0x13, + .start = 31, + .end = 0, + }, + [N_DROPS_SOTAG] = { + .area = ETHER, + .name = "n_drops_sotag", + .offset = 0x12, + .start = 31, + .end = 0, + }, + [N_DROPS_SITAG] = { + .area = ETHER, + .name = "n_drops_sitag", + .offset = 0x11, + .start = 31, + .end = 0, + }, + [N_DROPS_UTAG] = { + .area = ETHER, + .name = "n_drops_utag", + .offset = 0x10, + .start = 31, + .end = 0, + }, + [N_TX_BYTES_1024_2047] = { + .area = ETHER, + .name = "n_tx_bytes_1024_2047", + .offset = 0x0F, + .start = 31, + .end = 0, + }, + [N_TX_BYTES_512_1023] = { + .area = ETHER, + .name = "n_tx_bytes_512_1023", + .offset = 0x0E, + .start = 31, + .end = 0, + }, + [N_TX_BYTES_256_511] = { + .area = ETHER, + .name = "n_tx_bytes_256_511", + .offset = 0x0D, + .start = 31, + .end = 0, + }, + [N_TX_BYTES_128_255] = { + .area = ETHER, + .name = "n_tx_bytes_128_255", + .offset = 0x0C, + .start = 31, + .end = 0, + }, + [N_TX_BYTES_65_127] = { + .area = ETHER, + .name = "n_tx_bytes_65_127", + .offset = 0x0B, + .start = 31, + .end = 0, + }, + [N_TX_BYTES_64] = { + .area = ETHER, + .name = "n_tx_bytes_64", + .offset = 0x0A, + .start = 31, + .end = 0, + }, + [N_TX_MCAST] = { + .area = ETHER, + .name = "n_tx_mcast", + .offset = 0x09, + .start = 31, + .end = 0, + }, + [N_TX_BCAST] = { + .area = ETHER, + .name = "n_tx_bcast", + .offset = 0x08, + .start = 31, + .end = 0, + }, + [N_RX_BYTES_1024_2047] = { + .area = ETHER, + .name = "n_rx_bytes_1024_2047", + .offset = 0x07, + .start = 31, + .end = 0, + }, + [N_RX_BYTES_512_1023] = { + .area = ETHER, + .name = "n_rx_bytes_512_1023", + .offset = 0x06, + .start = 31, + .end = 0, + }, + [N_RX_BYTES_256_511] = { + .area = ETHER, + .name = "n_rx_bytes_256_511", + .offset = 0x05, + .start = 31, + .end = 0, + }, + [N_RX_BYTES_128_255] = { + .area = ETHER, + .name = "n_rx_bytes_128_255", + .offset = 0x04, + .start = 31, + .end = 0, + }, + [N_RX_BYTES_65_127] = { + .area = ETHER, + .name = "n_rx_bytes_65_127", + .offset = 0x03, + .start = 31, + .end = 0, + }, + [N_RX_BYTES_64] = { + .area = ETHER, + .name = "n_rx_bytes_64", + .offset = 0x02, + .start = 31, + .end = 0, + }, + [N_RX_MCAST] = { + .area = ETHER, + .name = "n_rx_mcast", + .offset = 0x01, + .start = 31, + .end = 0, + }, + [N_RX_BCAST] = { + .area = ETHER, + .name = "n_rx_bcast", + .offset = 0x00, + .start = 31, + .end = 0, + }, +}; + +static int sja1105_port_counter_read(struct sja1105_private *priv, int port, + enum sja1105_counter_index idx, u64 *ctr) +{ + const struct sja1105_port_counter *c = &sja1105_port_counters[idx]; + size_t size = c->is_64bit ? 8 : 4; + u8 buf[8] = {0}; + u64 regs; + int rc; + + regs = priv->info->regs->stats[c->area][port]; + + rc = sja1105_xfer_buf(priv, SPI_READ, regs + c->offset, buf, size); + if (rc) + return rc; + + sja1105_unpack(buf, ctr, c->start, c->end, size); + + return 0; +} + +void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data) +{ + struct sja1105_private *priv = ds->priv; + enum sja1105_counter_index max_ctr, i; + int rc, k = 0; + + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + max_ctr = __MAX_SJA1105ET_PORT_COUNTER; + else + max_ctr = __MAX_SJA1105PQRS_PORT_COUNTER; + + for (i = 0; i < max_ctr; i++) { + rc = sja1105_port_counter_read(priv, port, i, &data[k++]); + if (rc) { + dev_err(ds->dev, + "Failed to read port %d counters: %d\n", + port, rc); + break; + } + } +} + +void sja1105_get_strings(struct dsa_switch *ds, int port, + u32 stringset, u8 *data) +{ + struct sja1105_private *priv = ds->priv; + enum sja1105_counter_index max_ctr, i; + char *p = data; + + if (stringset != ETH_SS_STATS) + return; + + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + max_ctr = __MAX_SJA1105ET_PORT_COUNTER; + else + max_ctr = __MAX_SJA1105PQRS_PORT_COUNTER; + + for (i = 0; i < max_ctr; i++) { + strscpy(p, sja1105_port_counters[i].name, ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } +} + +int sja1105_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + struct sja1105_private *priv = ds->priv; + enum sja1105_counter_index max_ctr, i; + int sset_count = 0; + + if (sset != ETH_SS_STATS) + return -EOPNOTSUPP; + + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + max_ctr = __MAX_SJA1105ET_PORT_COUNTER; + else + max_ctr = __MAX_SJA1105PQRS_PORT_COUNTER; + + for (i = 0; i < max_ctr; i++) { + if (!strlen(sja1105_port_counters[i].name)) + continue; + + sset_count++; + } + + return sset_count; +} diff --git a/drivers/net/dsa/sja1105/sja1105_flower.c b/drivers/net/dsa/sja1105/sja1105_flower.c new file mode 100644 index 0000000000..9e8ca182c7 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_flower.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2020 NXP + */ +#include "sja1105.h" +#include "sja1105_vl.h" + +struct sja1105_rule *sja1105_rule_find(struct sja1105_private *priv, + unsigned long cookie) +{ + struct sja1105_rule *rule; + + list_for_each_entry(rule, &priv->flow_block.rules, list) + if (rule->cookie == cookie) + return rule; + + return NULL; +} + +static int sja1105_find_free_l2_policer(struct sja1105_private *priv) +{ + int i; + + for (i = 0; i < SJA1105_NUM_L2_POLICERS; i++) + if (!priv->flow_block.l2_policer_used[i]) + return i; + + return -1; +} + +static int sja1105_setup_bcast_policer(struct sja1105_private *priv, + struct netlink_ext_ack *extack, + unsigned long cookie, int port, + u64 rate_bytes_per_sec, + u32 burst) +{ + struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); + struct sja1105_l2_policing_entry *policing; + struct dsa_switch *ds = priv->ds; + bool new_rule = false; + unsigned long p; + int rc; + + if (!rule) { + rule = kzalloc(sizeof(*rule), GFP_KERNEL); + if (!rule) + return -ENOMEM; + + rule->cookie = cookie; + rule->type = SJA1105_RULE_BCAST_POLICER; + rule->bcast_pol.sharindx = sja1105_find_free_l2_policer(priv); + rule->key.type = SJA1105_KEY_BCAST; + new_rule = true; + } + + if (rule->bcast_pol.sharindx == -1) { + NL_SET_ERR_MSG_MOD(extack, "No more L2 policers free"); + rc = -ENOSPC; + goto out; + } + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + if (policing[(ds->num_ports * SJA1105_NUM_TC) + port].sharindx != port) { + NL_SET_ERR_MSG_MOD(extack, + "Port already has a broadcast policer"); + rc = -EEXIST; + goto out; + } + + rule->port_mask |= BIT(port); + + /* Make the broadcast policers of all ports attached to this block + * point to the newly allocated policer + */ + for_each_set_bit(p, &rule->port_mask, SJA1105_MAX_NUM_PORTS) { + int bcast = (ds->num_ports * SJA1105_NUM_TC) + p; + + policing[bcast].sharindx = rule->bcast_pol.sharindx; + } + + policing[rule->bcast_pol.sharindx].rate = div_u64(rate_bytes_per_sec * + 512, 1000000); + policing[rule->bcast_pol.sharindx].smax = burst; + + /* TODO: support per-flow MTU */ + policing[rule->bcast_pol.sharindx].maxlen = VLAN_ETH_FRAME_LEN + + ETH_FCS_LEN; + + rc = sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); + +out: + if (rc == 0 && new_rule) { + priv->flow_block.l2_policer_used[rule->bcast_pol.sharindx] = true; + list_add(&rule->list, &priv->flow_block.rules); + } else if (new_rule) { + kfree(rule); + } + + return rc; +} + +static int sja1105_setup_tc_policer(struct sja1105_private *priv, + struct netlink_ext_ack *extack, + unsigned long cookie, int port, int tc, + u64 rate_bytes_per_sec, + u32 burst) +{ + struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); + struct sja1105_l2_policing_entry *policing; + bool new_rule = false; + unsigned long p; + int rc; + + if (!rule) { + rule = kzalloc(sizeof(*rule), GFP_KERNEL); + if (!rule) + return -ENOMEM; + + rule->cookie = cookie; + rule->type = SJA1105_RULE_TC_POLICER; + rule->tc_pol.sharindx = sja1105_find_free_l2_policer(priv); + rule->key.type = SJA1105_KEY_TC; + rule->key.tc.pcp = tc; + new_rule = true; + } + + if (rule->tc_pol.sharindx == -1) { + NL_SET_ERR_MSG_MOD(extack, "No more L2 policers free"); + rc = -ENOSPC; + goto out; + } + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + if (policing[(port * SJA1105_NUM_TC) + tc].sharindx != port) { + NL_SET_ERR_MSG_MOD(extack, + "Port-TC pair already has an L2 policer"); + rc = -EEXIST; + goto out; + } + + rule->port_mask |= BIT(port); + + /* Make the policers for traffic class @tc of all ports attached to + * this block point to the newly allocated policer + */ + for_each_set_bit(p, &rule->port_mask, SJA1105_MAX_NUM_PORTS) { + int index = (p * SJA1105_NUM_TC) + tc; + + policing[index].sharindx = rule->tc_pol.sharindx; + } + + policing[rule->tc_pol.sharindx].rate = div_u64(rate_bytes_per_sec * + 512, 1000000); + policing[rule->tc_pol.sharindx].smax = burst; + + /* TODO: support per-flow MTU */ + policing[rule->tc_pol.sharindx].maxlen = VLAN_ETH_FRAME_LEN + + ETH_FCS_LEN; + + rc = sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); + +out: + if (rc == 0 && new_rule) { + priv->flow_block.l2_policer_used[rule->tc_pol.sharindx] = true; + list_add(&rule->list, &priv->flow_block.rules); + } else if (new_rule) { + kfree(rule); + } + + return rc; +} + +static int sja1105_flower_policer(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack, + unsigned long cookie, + struct sja1105_key *key, + u64 rate_bytes_per_sec, + u32 burst) +{ + switch (key->type) { + case SJA1105_KEY_BCAST: + return sja1105_setup_bcast_policer(priv, extack, cookie, port, + rate_bytes_per_sec, burst); + case SJA1105_KEY_TC: + return sja1105_setup_tc_policer(priv, extack, cookie, port, + key->tc.pcp, rate_bytes_per_sec, + burst); + default: + NL_SET_ERR_MSG_MOD(extack, "Unknown keys for policing"); + return -EOPNOTSUPP; + } +} + +static int sja1105_flower_parse_key(struct sja1105_private *priv, + struct netlink_ext_ack *extack, + struct flow_cls_offload *cls, + struct sja1105_key *key) +{ + struct flow_rule *rule = flow_cls_offload_flow_rule(cls); + struct flow_dissector *dissector = rule->match.dissector; + bool is_bcast_dmac = false; + u64 dmac = U64_MAX; + u16 vid = U16_MAX; + u16 pcp = U16_MAX; + + if (dissector->used_keys & + ~(BIT_ULL(FLOW_DISSECTOR_KEY_BASIC) | + BIT_ULL(FLOW_DISSECTOR_KEY_CONTROL) | + BIT_ULL(FLOW_DISSECTOR_KEY_VLAN) | + BIT_ULL(FLOW_DISSECTOR_KEY_ETH_ADDRS))) { + NL_SET_ERR_MSG_MOD(extack, + "Unsupported keys used"); + return -EOPNOTSUPP; + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) { + struct flow_match_basic match; + + flow_rule_match_basic(rule, &match); + if (match.key->n_proto) { + NL_SET_ERR_MSG_MOD(extack, + "Matching on protocol not supported"); + return -EOPNOTSUPP; + } + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { + u8 bcast[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + u8 null[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + struct flow_match_eth_addrs match; + + flow_rule_match_eth_addrs(rule, &match); + + if (!ether_addr_equal_masked(match.key->src, null, + match.mask->src)) { + NL_SET_ERR_MSG_MOD(extack, + "Matching on source MAC not supported"); + return -EOPNOTSUPP; + } + + if (!ether_addr_equal(match.mask->dst, bcast)) { + NL_SET_ERR_MSG_MOD(extack, + "Masked matching on MAC not supported"); + return -EOPNOTSUPP; + } + + dmac = ether_addr_to_u64(match.key->dst); + is_bcast_dmac = ether_addr_equal(match.key->dst, bcast); + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) { + struct flow_match_vlan match; + + flow_rule_match_vlan(rule, &match); + + if (match.mask->vlan_id && + match.mask->vlan_id != VLAN_VID_MASK) { + NL_SET_ERR_MSG_MOD(extack, + "Masked matching on VID is not supported"); + return -EOPNOTSUPP; + } + + if (match.mask->vlan_priority && + match.mask->vlan_priority != 0x7) { + NL_SET_ERR_MSG_MOD(extack, + "Masked matching on PCP is not supported"); + return -EOPNOTSUPP; + } + + if (match.mask->vlan_id) + vid = match.key->vlan_id; + if (match.mask->vlan_priority) + pcp = match.key->vlan_priority; + } + + if (is_bcast_dmac && vid == U16_MAX && pcp == U16_MAX) { + key->type = SJA1105_KEY_BCAST; + return 0; + } + if (dmac == U64_MAX && vid == U16_MAX && pcp != U16_MAX) { + key->type = SJA1105_KEY_TC; + key->tc.pcp = pcp; + return 0; + } + if (dmac != U64_MAX && vid != U16_MAX && pcp != U16_MAX) { + key->type = SJA1105_KEY_VLAN_AWARE_VL; + key->vl.dmac = dmac; + key->vl.vid = vid; + key->vl.pcp = pcp; + return 0; + } + if (dmac != U64_MAX) { + key->type = SJA1105_KEY_VLAN_UNAWARE_VL; + key->vl.dmac = dmac; + return 0; + } + + NL_SET_ERR_MSG_MOD(extack, "Not matching on any known key"); + return -EOPNOTSUPP; +} + +static int sja1105_policer_validate(const struct flow_action *action, + const struct flow_action_entry *act, + struct netlink_ext_ack *extack) +{ + if (act->police.exceed.act_id != FLOW_ACTION_DROP) { + NL_SET_ERR_MSG_MOD(extack, + "Offload not supported when exceed action is not drop"); + return -EOPNOTSUPP; + } + + if (act->police.notexceed.act_id != FLOW_ACTION_PIPE && + act->police.notexceed.act_id != FLOW_ACTION_ACCEPT) { + NL_SET_ERR_MSG_MOD(extack, + "Offload not supported when conform action is not pipe or ok"); + return -EOPNOTSUPP; + } + + if (act->police.notexceed.act_id == FLOW_ACTION_ACCEPT && + !flow_action_is_last_entry(action, act)) { + NL_SET_ERR_MSG_MOD(extack, + "Offload not supported when conform action is ok, but action is not last"); + return -EOPNOTSUPP; + } + + if (act->police.peakrate_bytes_ps || + act->police.avrate || act->police.overhead) { + NL_SET_ERR_MSG_MOD(extack, + "Offload not supported when peakrate/avrate/overhead is configured"); + return -EOPNOTSUPP; + } + + if (act->police.rate_pkt_ps) { + NL_SET_ERR_MSG_MOD(extack, + "QoS offload not support packets per second"); + return -EOPNOTSUPP; + } + + return 0; +} + +int sja1105_cls_flower_add(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct flow_rule *rule = flow_cls_offload_flow_rule(cls); + struct netlink_ext_ack *extack = cls->common.extack; + struct sja1105_private *priv = ds->priv; + const struct flow_action_entry *act; + unsigned long cookie = cls->cookie; + bool routing_rule = false; + struct sja1105_key key; + bool gate_rule = false; + bool vl_rule = false; + int rc, i; + + rc = sja1105_flower_parse_key(priv, extack, cls, &key); + if (rc) + return rc; + + flow_action_for_each(i, act, &rule->action) { + switch (act->id) { + case FLOW_ACTION_POLICE: + rc = sja1105_policer_validate(&rule->action, act, extack); + if (rc) + goto out; + + rc = sja1105_flower_policer(priv, port, extack, cookie, + &key, + act->police.rate_bytes_ps, + act->police.burst); + if (rc) + goto out; + break; + case FLOW_ACTION_TRAP: { + int cpu = dsa_upstream_port(ds, port); + + routing_rule = true; + vl_rule = true; + + rc = sja1105_vl_redirect(priv, port, extack, cookie, + &key, BIT(cpu), true); + if (rc) + goto out; + break; + } + case FLOW_ACTION_REDIRECT: { + struct dsa_port *to_dp; + + to_dp = dsa_port_from_netdev(act->dev); + if (IS_ERR(to_dp)) { + NL_SET_ERR_MSG_MOD(extack, + "Destination not a switch port"); + return -EOPNOTSUPP; + } + + routing_rule = true; + vl_rule = true; + + rc = sja1105_vl_redirect(priv, port, extack, cookie, + &key, BIT(to_dp->index), true); + if (rc) + goto out; + break; + } + case FLOW_ACTION_DROP: + vl_rule = true; + + rc = sja1105_vl_redirect(priv, port, extack, cookie, + &key, 0, false); + if (rc) + goto out; + break; + case FLOW_ACTION_GATE: + gate_rule = true; + vl_rule = true; + + rc = sja1105_vl_gate(priv, port, extack, cookie, + &key, act->hw_index, + act->gate.prio, + act->gate.basetime, + act->gate.cycletime, + act->gate.cycletimeext, + act->gate.num_entries, + act->gate.entries); + if (rc) + goto out; + break; + default: + NL_SET_ERR_MSG_MOD(extack, + "Action not supported"); + rc = -EOPNOTSUPP; + goto out; + } + } + + if (vl_rule && !rc) { + /* Delay scheduling configuration until DESTPORTS has been + * populated by all other actions. + */ + if (gate_rule) { + if (!routing_rule) { + NL_SET_ERR_MSG_MOD(extack, + "Can only offload gate action together with redirect or trap"); + return -EOPNOTSUPP; + } + rc = sja1105_init_scheduling(priv); + if (rc) + goto out; + } + + rc = sja1105_static_config_reload(priv, SJA1105_VIRTUAL_LINKS); + } + +out: + return rc; +} + +int sja1105_cls_flower_del(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_rule *rule = sja1105_rule_find(priv, cls->cookie); + struct sja1105_l2_policing_entry *policing; + int old_sharindx; + + if (!rule) + return 0; + + if (rule->type == SJA1105_RULE_VL) + return sja1105_vl_delete(priv, port, rule, cls->common.extack); + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + if (rule->type == SJA1105_RULE_BCAST_POLICER) { + int bcast = (ds->num_ports * SJA1105_NUM_TC) + port; + + old_sharindx = policing[bcast].sharindx; + policing[bcast].sharindx = port; + } else if (rule->type == SJA1105_RULE_TC_POLICER) { + int index = (port * SJA1105_NUM_TC) + rule->key.tc.pcp; + + old_sharindx = policing[index].sharindx; + policing[index].sharindx = port; + } else { + return -EINVAL; + } + + rule->port_mask &= ~BIT(port); + if (!rule->port_mask) { + priv->flow_block.l2_policer_used[old_sharindx] = false; + list_del(&rule->list); + kfree(rule); + } + + return sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); +} + +int sja1105_cls_flower_stats(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_rule *rule = sja1105_rule_find(priv, cls->cookie); + int rc; + + if (!rule) + return 0; + + if (rule->type != SJA1105_RULE_VL) + return 0; + + rc = sja1105_vl_stats(priv, port, rule, &cls->stats, + cls->common.extack); + if (rc) + return rc; + + return 0; +} + +void sja1105_flower_setup(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + int port; + + INIT_LIST_HEAD(&priv->flow_block.rules); + + for (port = 0; port < ds->num_ports; port++) + priv->flow_block.l2_policer_used[port] = true; +} + +void sja1105_flower_teardown(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_rule *rule; + struct list_head *pos, *n; + + list_for_each_safe(pos, n, &priv->flow_block.rules) { + rule = list_entry(pos, struct sja1105_rule, list); + list_del(&rule->list); + kfree(rule); + } +} diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c new file mode 100644 index 0000000000..1a367e64bc --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -0,0 +1,3472 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/spi/spi.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/phylink.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/pcs/pcs-xpcs.h> +#include <linux/netdev_features.h> +#include <linux/netdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_ether.h> +#include <linux/dsa/8021q.h> +#include "sja1105.h" +#include "sja1105_tas.h" + +#define SJA1105_UNKNOWN_MULTICAST 0x010000000000ull + +/* Configure the optional reset pin and bring up switch */ +static int sja1105_hw_reset(struct device *dev, unsigned int pulse_len, + unsigned int startup_delay) +{ + struct gpio_desc *gpio; + + gpio = gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + if (!gpio) + return 0; + + gpiod_set_value_cansleep(gpio, 1); + /* Wait for minimum reset pulse length */ + msleep(pulse_len); + gpiod_set_value_cansleep(gpio, 0); + /* Wait until chip is ready after reset */ + msleep(startup_delay); + + gpiod_put(gpio); + + return 0; +} + +static void +sja1105_port_allow_traffic(struct sja1105_l2_forwarding_entry *l2_fwd, + int from, int to, bool allow) +{ + if (allow) + l2_fwd[from].reach_port |= BIT(to); + else + l2_fwd[from].reach_port &= ~BIT(to); +} + +static bool sja1105_can_forward(struct sja1105_l2_forwarding_entry *l2_fwd, + int from, int to) +{ + return !!(l2_fwd[from].reach_port & BIT(to)); +} + +static int sja1105_is_vlan_configured(struct sja1105_private *priv, u16 vid) +{ + struct sja1105_vlan_lookup_entry *vlan; + int count, i; + + vlan = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entries; + count = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entry_count; + + for (i = 0; i < count; i++) + if (vlan[i].vlanid == vid) + return i; + + /* Return an invalid entry index if not found */ + return -1; +} + +static int sja1105_drop_untagged(struct dsa_switch *ds, int port, bool drop) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + if (mac[port].drpuntag == drop) + return 0; + + mac[port].drpuntag = drop; + + return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_pvid_apply(struct sja1105_private *priv, int port, u16 pvid) +{ + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + if (mac[port].vlanid == pvid) + return 0; + + mac[port].vlanid = pvid; + + return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_commit_pvid(struct dsa_switch *ds, int port) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *br = dsa_port_bridge_dev_get(dp); + struct sja1105_private *priv = ds->priv; + struct sja1105_vlan_lookup_entry *vlan; + bool drop_untagged = false; + int match, rc; + u16 pvid; + + if (br && br_vlan_enabled(br)) + pvid = priv->bridge_pvid[port]; + else + pvid = priv->tag_8021q_pvid[port]; + + rc = sja1105_pvid_apply(priv, port, pvid); + if (rc) + return rc; + + /* Only force dropping of untagged packets when the port is under a + * VLAN-aware bridge. When the tag_8021q pvid is used, we are + * deliberately removing the RX VLAN from the port's VMEMB_PORT list, + * to prevent DSA tag spoofing from the link partner. Untagged packets + * are the only ones that should be received with tag_8021q, so + * definitely don't drop them. + */ + if (pvid == priv->bridge_pvid[port]) { + vlan = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entries; + + match = sja1105_is_vlan_configured(priv, pvid); + + if (match < 0 || !(vlan[match].vmemb_port & BIT(port))) + drop_untagged = true; + } + + if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) + drop_untagged = true; + + return sja1105_drop_untagged(ds, port, drop_untagged); +} + +static int sja1105_init_mac_settings(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry default_mac = { + /* Enable all 8 priority queues on egress. + * Every queue i holds top[i] - base[i] frames. + * Sum of top[i] - base[i] is 511 (max hardware limit). + */ + .top = {0x3F, 0x7F, 0xBF, 0xFF, 0x13F, 0x17F, 0x1BF, 0x1FF}, + .base = {0x0, 0x40, 0x80, 0xC0, 0x100, 0x140, 0x180, 0x1C0}, + .enabled = {true, true, true, true, true, true, true, true}, + /* Keep standard IFG of 12 bytes on egress. */ + .ifg = 0, + /* Always put the MAC speed in automatic mode, where it can be + * adjusted at runtime by PHYLINK. + */ + .speed = priv->info->port_speed[SJA1105_SPEED_AUTO], + /* No static correction for 1-step 1588 events */ + .tp_delin = 0, + .tp_delout = 0, + /* Disable aging for critical TTEthernet traffic */ + .maxage = 0xFF, + /* Internal VLAN (pvid) to apply to untagged ingress */ + .vlanprio = 0, + .vlanid = 1, + .ing_mirr = false, + .egr_mirr = false, + /* Don't drop traffic with other EtherType than ETH_P_IP */ + .drpnona664 = false, + /* Don't drop double-tagged traffic */ + .drpdtag = false, + /* Don't drop untagged traffic */ + .drpuntag = false, + /* Don't retag 802.1p (VID 0) traffic with the pvid */ + .retag = false, + /* Disable learning and I/O on user ports by default - + * STP will enable it. + */ + .dyn_learn = false, + .egress = false, + .ingress = false, + }; + struct sja1105_mac_config_entry *mac; + struct dsa_switch *ds = priv->ds; + struct sja1105_table *table; + struct dsa_port *dp; + + table = &priv->static_config.tables[BLK_IDX_MAC_CONFIG]; + + /* Discard previous MAC Configuration Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + mac = table->entries; + + list_for_each_entry(dp, &ds->dst->ports, list) { + if (dp->ds != ds) + continue; + + mac[dp->index] = default_mac; + + /* Let sja1105_bridge_stp_state_set() keep address learning + * enabled for the DSA ports. CPU ports use software-assisted + * learning to ensure that only FDB entries belonging to the + * bridge are learned, and that they are learned towards all + * CPU ports in a cross-chip topology if multiple CPU ports + * exist. + */ + if (dsa_port_is_dsa(dp)) + dp->learning = true; + + /* Disallow untagged packets from being received on the + * CPU and DSA ports. + */ + if (dsa_port_is_cpu(dp) || dsa_port_is_dsa(dp)) + mac[dp->index].drpuntag = true; + } + + return 0; +} + +static int sja1105_init_mii_settings(struct sja1105_private *priv) +{ + struct device *dev = &priv->spidev->dev; + struct sja1105_xmii_params_entry *mii; + struct dsa_switch *ds = priv->ds; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_XMII_PARAMS]; + + /* Discard previous xMII Mode Parameters Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + /* Override table based on PHYLINK DT bindings */ + table->entry_count = table->ops->max_entry_count; + + mii = table->entries; + + for (i = 0; i < ds->num_ports; i++) { + sja1105_mii_role_t role = XMII_MAC; + + if (dsa_is_unused_port(priv->ds, i)) + continue; + + switch (priv->phy_mode[i]) { + case PHY_INTERFACE_MODE_INTERNAL: + if (priv->info->internal_phy[i] == SJA1105_NO_PHY) + goto unsupported; + + mii->xmii_mode[i] = XMII_MODE_MII; + if (priv->info->internal_phy[i] == SJA1105_PHY_BASE_TX) + mii->special[i] = true; + + break; + case PHY_INTERFACE_MODE_REVMII: + role = XMII_PHY; + fallthrough; + case PHY_INTERFACE_MODE_MII: + if (!priv->info->supports_mii[i]) + goto unsupported; + + mii->xmii_mode[i] = XMII_MODE_MII; + break; + case PHY_INTERFACE_MODE_REVRMII: + role = XMII_PHY; + fallthrough; + case PHY_INTERFACE_MODE_RMII: + if (!priv->info->supports_rmii[i]) + goto unsupported; + + mii->xmii_mode[i] = XMII_MODE_RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + if (!priv->info->supports_rgmii[i]) + goto unsupported; + + mii->xmii_mode[i] = XMII_MODE_RGMII; + break; + case PHY_INTERFACE_MODE_SGMII: + if (!priv->info->supports_sgmii[i]) + goto unsupported; + + mii->xmii_mode[i] = XMII_MODE_SGMII; + mii->special[i] = true; + break; + case PHY_INTERFACE_MODE_2500BASEX: + if (!priv->info->supports_2500basex[i]) + goto unsupported; + + mii->xmii_mode[i] = XMII_MODE_SGMII; + mii->special[i] = true; + break; +unsupported: + default: + dev_err(dev, "Unsupported PHY mode %s on port %d!\n", + phy_modes(priv->phy_mode[i]), i); + return -EINVAL; + } + + mii->phy_mac[i] = role; + } + return 0; +} + +static int sja1105_init_static_fdb(struct sja1105_private *priv) +{ + struct sja1105_l2_lookup_entry *l2_lookup; + struct sja1105_table *table; + int port; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + + /* We only populate the FDB table through dynamic L2 Address Lookup + * entries, except for a special entry at the end which is a catch-all + * for unknown multicast and will be used to control flooding domain. + */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + if (!priv->info->can_limit_mcast_flood) + return 0; + + table->entries = kcalloc(1, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = 1; + l2_lookup = table->entries; + + /* All L2 multicast addresses have an odd first octet */ + l2_lookup[0].macaddr = SJA1105_UNKNOWN_MULTICAST; + l2_lookup[0].mask_macaddr = SJA1105_UNKNOWN_MULTICAST; + l2_lookup[0].lockeds = true; + l2_lookup[0].index = SJA1105_MAX_L2_LOOKUP_COUNT - 1; + + /* Flood multicast to every port by default */ + for (port = 0; port < priv->ds->num_ports; port++) + if (!dsa_is_unused_port(priv->ds, port)) + l2_lookup[0].destports |= BIT(port); + + return 0; +} + +static int sja1105_init_l2_lookup_params(struct sja1105_private *priv) +{ + struct sja1105_l2_lookup_params_entry default_l2_lookup_params = { + /* Learned FDB entries are forgotten after 300 seconds */ + .maxage = SJA1105_AGEING_TIME_MS(300000), + /* All entries within a FDB bin are available for learning */ + .dyn_tbsz = SJA1105ET_FDB_BIN_SIZE, + /* And the P/Q/R/S equivalent setting: */ + .start_dynspc = 0, + /* 2^8 + 2^5 + 2^3 + 2^2 + 2^1 + 1 in Koopman notation */ + .poly = 0x97, + /* Always use Independent VLAN Learning (IVL) */ + .shared_learn = false, + /* Don't discard management traffic based on ENFPORT - + * we don't perform SMAC port enforcement anyway, so + * what we are setting here doesn't matter. + */ + .no_enf_hostprt = false, + /* Don't learn SMAC for mac_fltres1 and mac_fltres0. + * Maybe correlate with no_linklocal_learn from bridge driver? + */ + .no_mgmt_learn = true, + /* P/Q/R/S only */ + .use_static = true, + /* Dynamically learned FDB entries can overwrite other (older) + * dynamic FDB entries + */ + .owr_dyn = true, + .drpnolearn = true, + }; + struct dsa_switch *ds = priv->ds; + int port, num_used_ports = 0; + struct sja1105_table *table; + u64 max_fdb_entries; + + for (port = 0; port < ds->num_ports; port++) + if (!dsa_is_unused_port(ds, port)) + num_used_ports++; + + max_fdb_entries = SJA1105_MAX_L2_LOOKUP_COUNT / num_used_ports; + + for (port = 0; port < ds->num_ports; port++) { + if (dsa_is_unused_port(ds, port)) + continue; + + default_l2_lookup_params.maxaddrp[port] = max_fdb_entries; + } + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + /* This table only has a single entry */ + ((struct sja1105_l2_lookup_params_entry *)table->entries)[0] = + default_l2_lookup_params; + + return 0; +} + +/* Set up a default VLAN for untagged traffic injected from the CPU + * using management routes (e.g. STP, PTP) as opposed to tag_8021q. + * All DT-defined ports are members of this VLAN, and there are no + * restrictions on forwarding (since the CPU selects the destination). + * Frames from this VLAN will always be transmitted as untagged, and + * neither the bridge nor the 8021q module cannot create this VLAN ID. + */ +static int sja1105_init_static_vlan(struct sja1105_private *priv) +{ + struct sja1105_table *table; + struct sja1105_vlan_lookup_entry pvid = { + .type_entry = SJA1110_VLAN_D_TAG, + .ving_mirr = 0, + .vegr_mirr = 0, + .vmemb_port = 0, + .vlan_bc = 0, + .tag_port = 0, + .vlanid = SJA1105_DEFAULT_VLAN, + }; + struct dsa_switch *ds = priv->ds; + int port; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kzalloc(table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = 1; + + for (port = 0; port < ds->num_ports; port++) { + if (dsa_is_unused_port(ds, port)) + continue; + + pvid.vmemb_port |= BIT(port); + pvid.vlan_bc |= BIT(port); + pvid.tag_port &= ~BIT(port); + + if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) { + priv->tag_8021q_pvid[port] = SJA1105_DEFAULT_VLAN; + priv->bridge_pvid[port] = SJA1105_DEFAULT_VLAN; + } + } + + ((struct sja1105_vlan_lookup_entry *)table->entries)[0] = pvid; + return 0; +} + +static int sja1105_init_l2_forwarding(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_entry *l2fwd; + struct dsa_switch *ds = priv->ds; + struct dsa_switch_tree *dst; + struct sja1105_table *table; + struct dsa_link *dl; + int port, tc; + int from, to; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + l2fwd = table->entries; + + /* First 5 entries in the L2 Forwarding Table define the forwarding + * rules and the VLAN PCP to ingress queue mapping. + * Set up the ingress queue mapping first. + */ + for (port = 0; port < ds->num_ports; port++) { + if (dsa_is_unused_port(ds, port)) + continue; + + for (tc = 0; tc < SJA1105_NUM_TC; tc++) + l2fwd[port].vlan_pmap[tc] = tc; + } + + /* Then manage the forwarding domain for user ports. These can forward + * only to the always-on domain (CPU port and DSA links) + */ + for (from = 0; from < ds->num_ports; from++) { + if (!dsa_is_user_port(ds, from)) + continue; + + for (to = 0; to < ds->num_ports; to++) { + if (!dsa_is_cpu_port(ds, to) && + !dsa_is_dsa_port(ds, to)) + continue; + + l2fwd[from].bc_domain |= BIT(to); + l2fwd[from].fl_domain |= BIT(to); + + sja1105_port_allow_traffic(l2fwd, from, to, true); + } + } + + /* Then manage the forwarding domain for DSA links and CPU ports (the + * always-on domain). These can send packets to any enabled port except + * themselves. + */ + for (from = 0; from < ds->num_ports; from++) { + if (!dsa_is_cpu_port(ds, from) && !dsa_is_dsa_port(ds, from)) + continue; + + for (to = 0; to < ds->num_ports; to++) { + if (dsa_is_unused_port(ds, to)) + continue; + + if (from == to) + continue; + + l2fwd[from].bc_domain |= BIT(to); + l2fwd[from].fl_domain |= BIT(to); + + sja1105_port_allow_traffic(l2fwd, from, to, true); + } + } + + /* In odd topologies ("H" connections where there is a DSA link to + * another switch which also has its own CPU port), TX packets can loop + * back into the system (they are flooded from CPU port 1 to the DSA + * link, and from there to CPU port 2). Prevent this from happening by + * cutting RX from DSA links towards our CPU port, if the remote switch + * has its own CPU port and therefore doesn't need ours for network + * stack termination. + */ + dst = ds->dst; + + list_for_each_entry(dl, &dst->rtable, list) { + if (dl->dp->ds != ds || dl->link_dp->cpu_dp == dl->dp->cpu_dp) + continue; + + from = dl->dp->index; + to = dsa_upstream_port(ds, from); + + dev_warn(ds->dev, + "H topology detected, cutting RX from DSA link %d to CPU port %d to prevent TX packet loops\n", + from, to); + + sja1105_port_allow_traffic(l2fwd, from, to, false); + + l2fwd[from].bc_domain &= ~BIT(to); + l2fwd[from].fl_domain &= ~BIT(to); + } + + /* Finally, manage the egress flooding domain. All ports start up with + * flooding enabled, including the CPU port and DSA links. + */ + for (port = 0; port < ds->num_ports; port++) { + if (dsa_is_unused_port(ds, port)) + continue; + + priv->ucast_egress_floods |= BIT(port); + priv->bcast_egress_floods |= BIT(port); + } + + /* Next 8 entries define VLAN PCP mapping from ingress to egress. + * Create a one-to-one mapping. + */ + for (tc = 0; tc < SJA1105_NUM_TC; tc++) { + for (port = 0; port < ds->num_ports; port++) { + if (dsa_is_unused_port(ds, port)) + continue; + + l2fwd[ds->num_ports + tc].vlan_pmap[port] = tc; + } + + l2fwd[ds->num_ports + tc].type_egrpcp2outputq = true; + } + + return 0; +} + +static int sja1110_init_pcp_remapping(struct sja1105_private *priv) +{ + struct sja1110_pcp_remapping_entry *pcp_remap; + struct dsa_switch *ds = priv->ds; + struct sja1105_table *table; + int port, tc; + + table = &priv->static_config.tables[BLK_IDX_PCP_REMAPPING]; + + /* Nothing to do for SJA1105 */ + if (!table->ops->max_entry_count) + return 0; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + pcp_remap = table->entries; + + /* Repeat the configuration done for vlan_pmap */ + for (port = 0; port < ds->num_ports; port++) { + if (dsa_is_unused_port(ds, port)) + continue; + + for (tc = 0; tc < SJA1105_NUM_TC; tc++) + pcp_remap[port].egrpcp[tc] = tc; + } + + return 0; +} + +static int sja1105_init_l2_forwarding_params(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_params_entry *l2fwd_params; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + /* This table only has a single entry */ + l2fwd_params = table->entries; + + /* Disallow dynamic reconfiguration of vlan_pmap */ + l2fwd_params->max_dynp = 0; + /* Use a single memory partition for all ingress queues */ + l2fwd_params->part_spc[0] = priv->info->max_frame_mem; + + return 0; +} + +void sja1105_frame_memory_partitioning(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_params_entry *l2_fwd_params; + struct sja1105_vl_forwarding_params_entry *vl_fwd_params; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS]; + l2_fwd_params = table->entries; + l2_fwd_params->part_spc[0] = SJA1105_MAX_FRAME_MEMORY; + + /* If we have any critical-traffic virtual links, we need to reserve + * some frame buffer memory for them. At the moment, hardcode the value + * at 100 blocks of 128 bytes of memory each. This leaves 829 blocks + * remaining for best-effort traffic. TODO: figure out a more flexible + * way to perform the frame buffer partitioning. + */ + if (!priv->static_config.tables[BLK_IDX_VL_FORWARDING].entry_count) + return; + + table = &priv->static_config.tables[BLK_IDX_VL_FORWARDING_PARAMS]; + vl_fwd_params = table->entries; + + l2_fwd_params->part_spc[0] -= SJA1105_VL_FRAME_MEMORY; + vl_fwd_params->partspc[0] = SJA1105_VL_FRAME_MEMORY; +} + +/* SJA1110 TDMACONFIGIDX values: + * + * | 100 Mbps ports | 1Gbps ports | 2.5Gbps ports | Disabled ports + * -----+----------------+---------------+---------------+--------------- + * 0 | 0, [5:10] | [1:2] | [3:4] | retag + * 1 |0, [5:10], retag| [1:2] | [3:4] | - + * 2 | 0, [5:10] | [1:3], retag | 4 | - + * 3 | 0, [5:10] |[1:2], 4, retag| 3 | - + * 4 | 0, 2, [5:10] | 1, retag | [3:4] | - + * 5 | 0, 1, [5:10] | 2, retag | [3:4] | - + * 14 | 0, [5:10] | [1:4], retag | - | - + * 15 | [5:10] | [0:4], retag | - | - + */ +static void sja1110_select_tdmaconfigidx(struct sja1105_private *priv) +{ + struct sja1105_general_params_entry *general_params; + struct sja1105_table *table; + bool port_1_is_base_tx; + bool port_3_is_2500; + bool port_4_is_2500; + u64 tdmaconfigidx; + + if (priv->info->device_id != SJA1110_DEVICE_ID) + return; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + general_params = table->entries; + + /* All the settings below are "as opposed to SGMII", which is the + * other pinmuxing option. + */ + port_1_is_base_tx = priv->phy_mode[1] == PHY_INTERFACE_MODE_INTERNAL; + port_3_is_2500 = priv->phy_mode[3] == PHY_INTERFACE_MODE_2500BASEX; + port_4_is_2500 = priv->phy_mode[4] == PHY_INTERFACE_MODE_2500BASEX; + + if (port_1_is_base_tx) + /* Retagging port will operate at 1 Gbps */ + tdmaconfigidx = 5; + else if (port_3_is_2500 && port_4_is_2500) + /* Retagging port will operate at 100 Mbps */ + tdmaconfigidx = 1; + else if (port_3_is_2500) + /* Retagging port will operate at 1 Gbps */ + tdmaconfigidx = 3; + else if (port_4_is_2500) + /* Retagging port will operate at 1 Gbps */ + tdmaconfigidx = 2; + else + /* Retagging port will operate at 1 Gbps */ + tdmaconfigidx = 14; + + general_params->tdmaconfigidx = tdmaconfigidx; +} + +static int sja1105_init_topology(struct sja1105_private *priv, + struct sja1105_general_params_entry *general_params) +{ + struct dsa_switch *ds = priv->ds; + int port; + + /* The host port is the destination for traffic matching mac_fltres1 + * and mac_fltres0 on all ports except itself. Default to an invalid + * value. + */ + general_params->host_port = ds->num_ports; + + /* Link-local traffic received on casc_port will be forwarded + * to host_port without embedding the source port and device ID + * info in the destination MAC address, and no RX timestamps will be + * taken either (presumably because it is a cascaded port and a + * downstream SJA switch already did that). + * To disable the feature, we need to do different things depending on + * switch generation. On SJA1105 we need to set an invalid port, while + * on SJA1110 which support multiple cascaded ports, this field is a + * bitmask so it must be left zero. + */ + if (!priv->info->multiple_cascade_ports) + general_params->casc_port = ds->num_ports; + + for (port = 0; port < ds->num_ports; port++) { + bool is_upstream = dsa_is_upstream_port(ds, port); + bool is_dsa_link = dsa_is_dsa_port(ds, port); + + /* Upstream ports can be dedicated CPU ports or + * upstream-facing DSA links + */ + if (is_upstream) { + if (general_params->host_port == ds->num_ports) { + general_params->host_port = port; + } else { + dev_err(ds->dev, + "Port %llu is already a host port, configuring %d as one too is not supported\n", + general_params->host_port, port); + return -EINVAL; + } + } + + /* Cascade ports are downstream-facing DSA links */ + if (is_dsa_link && !is_upstream) { + if (priv->info->multiple_cascade_ports) { + general_params->casc_port |= BIT(port); + } else if (general_params->casc_port == ds->num_ports) { + general_params->casc_port = port; + } else { + dev_err(ds->dev, + "Port %llu is already a cascade port, configuring %d as one too is not supported\n", + general_params->casc_port, port); + return -EINVAL; + } + } + } + + if (general_params->host_port == ds->num_ports) { + dev_err(ds->dev, "No host port configured\n"); + return -EINVAL; + } + + return 0; +} + +static int sja1105_init_general_params(struct sja1105_private *priv) +{ + struct sja1105_general_params_entry default_general_params = { + /* Allow dynamic changing of the mirror port */ + .mirr_ptacu = true, + .switchid = priv->ds->index, + /* Priority queue for link-local management frames + * (both ingress to and egress from CPU - PTP, STP etc) + */ + .hostprio = 7, + .mac_fltres1 = SJA1105_LINKLOCAL_FILTER_A, + .mac_flt1 = SJA1105_LINKLOCAL_FILTER_A_MASK, + .incl_srcpt1 = true, + .send_meta1 = true, + .mac_fltres0 = SJA1105_LINKLOCAL_FILTER_B, + .mac_flt0 = SJA1105_LINKLOCAL_FILTER_B_MASK, + .incl_srcpt0 = true, + .send_meta0 = true, + /* Default to an invalid value */ + .mirr_port = priv->ds->num_ports, + /* No TTEthernet */ + .vllupformat = SJA1105_VL_FORMAT_PSFP, + .vlmarker = 0, + .vlmask = 0, + /* Only update correctionField for 1-step PTP (L2 transport) */ + .ignore2stf = 0, + /* Forcefully disable VLAN filtering by telling + * the switch that VLAN has a different EtherType. + */ + .tpid = ETH_P_SJA1105, + .tpid2 = ETH_P_SJA1105, + /* Enable the TTEthernet engine on SJA1110 */ + .tte_en = true, + /* Set up the EtherType for control packets on SJA1110 */ + .header_type = ETH_P_SJA1110, + }; + struct sja1105_general_params_entry *general_params; + struct sja1105_table *table; + int rc; + + rc = sja1105_init_topology(priv, &default_general_params); + if (rc) + return rc; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + general_params = table->entries; + + /* This table only has a single entry */ + general_params[0] = default_general_params; + + sja1110_select_tdmaconfigidx(priv); + + return 0; +} + +static int sja1105_init_avb_params(struct sja1105_private *priv) +{ + struct sja1105_avb_params_entry *avb; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_AVB_PARAMS]; + + /* Discard previous AVB Parameters Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + avb = table->entries; + + /* Configure the MAC addresses for meta frames */ + avb->destmeta = SJA1105_META_DMAC; + avb->srcmeta = SJA1105_META_SMAC; + /* On P/Q/R/S, configure the direction of the PTP_CLK pin as input by + * default. This is because there might be boards with a hardware + * layout where enabling the pin as output might cause an electrical + * clash. On E/T the pin is always an output, which the board designers + * probably already knew, so even if there are going to be electrical + * issues, there's nothing we can do. + */ + avb->cas_master = false; + + return 0; +} + +/* The L2 policing table is 2-stage. The table is looked up for each frame + * according to the ingress port, whether it was broadcast or not, and the + * classified traffic class (given by VLAN PCP). This portion of the lookup is + * fixed, and gives access to the SHARINDX, an indirection register pointing + * within the policing table itself, which is used to resolve the policer that + * will be used for this frame. + * + * Stage 1 Stage 2 + * +------------+--------+ +---------------------------------+ + * |Port 0 TC 0 |SHARINDX| | Policer 0: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 0 TC 1 |SHARINDX| | Policer 1: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * ... | Policer 2: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 0 TC 7 |SHARINDX| | Policer 3: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 1 TC 0 |SHARINDX| | Policer 4: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * ... | Policer 5: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 1 TC 7 |SHARINDX| | Policer 6: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * ... | Policer 7: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 4 TC 7 |SHARINDX| ... + * +------------+--------+ + * |Port 0 BCAST|SHARINDX| ... + * +------------+--------+ + * |Port 1 BCAST|SHARINDX| ... + * +------------+--------+ + * ... ... + * +------------+--------+ +---------------------------------+ + * |Port 4 BCAST|SHARINDX| | Policer 44: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * + * In this driver, we shall use policers 0-4 as statically alocated port + * (matchall) policers. So we need to make the SHARINDX for all lookups + * corresponding to this ingress port (8 VLAN PCP lookups and 1 broadcast + * lookup) equal. + * The remaining policers (40) shall be dynamically allocated for flower + * policers, where the key is either vlan_prio or dst_mac ff:ff:ff:ff:ff:ff. + */ +#define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000) + +static int sja1105_init_l2_policing(struct sja1105_private *priv) +{ + struct sja1105_l2_policing_entry *policing; + struct dsa_switch *ds = priv->ds; + struct sja1105_table *table; + int port, tc; + + table = &priv->static_config.tables[BLK_IDX_L2_POLICING]; + + /* Discard previous L2 Policing Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(table->ops->max_entry_count, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = table->ops->max_entry_count; + + policing = table->entries; + + /* Setup shared indices for the matchall policers */ + for (port = 0; port < ds->num_ports; port++) { + int mcast = (ds->num_ports * (SJA1105_NUM_TC + 1)) + port; + int bcast = (ds->num_ports * SJA1105_NUM_TC) + port; + + for (tc = 0; tc < SJA1105_NUM_TC; tc++) + policing[port * SJA1105_NUM_TC + tc].sharindx = port; + + policing[bcast].sharindx = port; + /* Only SJA1110 has multicast policers */ + if (mcast < table->ops->max_entry_count) + policing[mcast].sharindx = port; + } + + /* Setup the matchall policer parameters */ + for (port = 0; port < ds->num_ports; port++) { + int mtu = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; + + if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) + mtu += VLAN_HLEN; + + policing[port].smax = 65535; /* Burst size in bytes */ + policing[port].rate = SJA1105_RATE_MBPS(1000); + policing[port].maxlen = mtu; + policing[port].partition = 0; + } + + return 0; +} + +static int sja1105_static_config_load(struct sja1105_private *priv) +{ + int rc; + + sja1105_static_config_free(&priv->static_config); + rc = sja1105_static_config_init(&priv->static_config, + priv->info->static_ops, + priv->info->device_id); + if (rc) + return rc; + + /* Build static configuration */ + rc = sja1105_init_mac_settings(priv); + if (rc < 0) + return rc; + rc = sja1105_init_mii_settings(priv); + if (rc < 0) + return rc; + rc = sja1105_init_static_fdb(priv); + if (rc < 0) + return rc; + rc = sja1105_init_static_vlan(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_lookup_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_policing(priv); + if (rc < 0) + return rc; + rc = sja1105_init_general_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_avb_params(priv); + if (rc < 0) + return rc; + rc = sja1110_init_pcp_remapping(priv); + if (rc < 0) + return rc; + + /* Send initial configuration to hardware via SPI */ + return sja1105_static_config_upload(priv); +} + +/* This is the "new way" for a MAC driver to configure its RGMII delay lines, + * based on the explicit "rx-internal-delay-ps" and "tx-internal-delay-ps" + * properties. It has the advantage of working with fixed links and with PHYs + * that apply RGMII delays too, and the MAC driver needs not perform any + * special checks. + * + * Previously we were acting upon the "phy-mode" property when we were + * operating in fixed-link, basically acting as a PHY, but with a reversed + * interpretation: PHY_INTERFACE_MODE_RGMII_TXID means that the MAC should + * behave as if it is connected to a PHY which has applied RGMII delays in the + * TX direction. So if anything, RX delays should have been added by the MAC, + * but we were adding TX delays. + * + * If the "{rx,tx}-internal-delay-ps" properties are not specified, we fall + * back to the legacy behavior and apply delays on fixed-link ports based on + * the reverse interpretation of the phy-mode. This is a deviation from the + * expected default behavior which is to simply apply no delays. To achieve + * that behavior with the new bindings, it is mandatory to specify + * "{rx,tx}-internal-delay-ps" with a value of 0. + */ +static int sja1105_parse_rgmii_delays(struct sja1105_private *priv, int port, + struct device_node *port_dn) +{ + phy_interface_t phy_mode = priv->phy_mode[port]; + struct device *dev = &priv->spidev->dev; + int rx_delay = -1, tx_delay = -1; + + if (!phy_interface_mode_is_rgmii(phy_mode)) + return 0; + + of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay); + of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay); + + if (rx_delay == -1 && tx_delay == -1 && priv->fixed_link[port]) { + dev_warn(dev, + "Port %d interpreting RGMII delay settings based on \"phy-mode\" property, " + "please update device tree to specify \"rx-internal-delay-ps\" and " + "\"tx-internal-delay-ps\"", + port); + + if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + rx_delay = 2000; + + if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + tx_delay = 2000; + } + + if (rx_delay < 0) + rx_delay = 0; + if (tx_delay < 0) + tx_delay = 0; + + if ((rx_delay || tx_delay) && !priv->info->setup_rgmii_delay) { + dev_err(dev, "Chip cannot apply RGMII delays\n"); + return -EINVAL; + } + + if ((rx_delay && rx_delay < SJA1105_RGMII_DELAY_MIN_PS) || + (tx_delay && tx_delay < SJA1105_RGMII_DELAY_MIN_PS) || + (rx_delay > SJA1105_RGMII_DELAY_MAX_PS) || + (tx_delay > SJA1105_RGMII_DELAY_MAX_PS)) { + dev_err(dev, + "port %d RGMII delay values out of range, must be between %d and %d ps\n", + port, SJA1105_RGMII_DELAY_MIN_PS, SJA1105_RGMII_DELAY_MAX_PS); + return -ERANGE; + } + + priv->rgmii_rx_delay_ps[port] = rx_delay; + priv->rgmii_tx_delay_ps[port] = tx_delay; + + return 0; +} + +static int sja1105_parse_ports_node(struct sja1105_private *priv, + struct device_node *ports_node) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *child; + + for_each_available_child_of_node(ports_node, child) { + struct device_node *phy_node; + phy_interface_t phy_mode; + u32 index; + int err; + + /* Get switch port number from DT */ + if (of_property_read_u32(child, "reg", &index) < 0) { + dev_err(dev, "Port number not defined in device tree " + "(property \"reg\")\n"); + of_node_put(child); + return -ENODEV; + } + + /* Get PHY mode from DT */ + err = of_get_phy_mode(child, &phy_mode); + if (err) { + dev_err(dev, "Failed to read phy-mode or " + "phy-interface-type property for port %d\n", + index); + of_node_put(child); + return -ENODEV; + } + + phy_node = of_parse_phandle(child, "phy-handle", 0); + if (!phy_node) { + if (!of_phy_is_fixed_link(child)) { + dev_err(dev, "phy-handle or fixed-link " + "properties missing!\n"); + of_node_put(child); + return -ENODEV; + } + /* phy-handle is missing, but fixed-link isn't. + * So it's a fixed link. Default to PHY role. + */ + priv->fixed_link[index] = true; + } else { + of_node_put(phy_node); + } + + priv->phy_mode[index] = phy_mode; + + err = sja1105_parse_rgmii_delays(priv, index, child); + if (err) { + of_node_put(child); + return err; + } + } + + return 0; +} + +static int sja1105_parse_dt(struct sja1105_private *priv) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *switch_node = dev->of_node; + struct device_node *ports_node; + int rc; + + ports_node = of_get_child_by_name(switch_node, "ports"); + if (!ports_node) + ports_node = of_get_child_by_name(switch_node, "ethernet-ports"); + if (!ports_node) { + dev_err(dev, "Incorrect bindings: absent \"ports\" node\n"); + return -ENODEV; + } + + rc = sja1105_parse_ports_node(priv, ports_node); + of_node_put(ports_node); + + return rc; +} + +/* Convert link speed from SJA1105 to ethtool encoding */ +static int sja1105_port_speed_to_ethtool(struct sja1105_private *priv, + u64 speed) +{ + if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) + return SPEED_10; + if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) + return SPEED_100; + if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) + return SPEED_1000; + if (speed == priv->info->port_speed[SJA1105_SPEED_2500MBPS]) + return SPEED_2500; + return SPEED_UNKNOWN; +} + +/* Set link speed in the MAC configuration for a specific port. */ +static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, + int speed_mbps) +{ + struct sja1105_mac_config_entry *mac; + struct device *dev = priv->ds->dev; + u64 speed; + int rc; + + /* On P/Q/R/S, one can read from the device via the MAC reconfiguration + * tables. On E/T, MAC reconfig tables are not readable, only writable. + * We have to *know* what the MAC looks like. For the sake of keeping + * the code common, we'll use the static configuration tables as a + * reasonable approximation for both E/T and P/Q/R/S. + */ + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + switch (speed_mbps) { + case SPEED_UNKNOWN: + /* PHYLINK called sja1105_mac_config() to inform us about + * the state->interface, but AN has not completed and the + * speed is not yet valid. UM10944.pdf says that setting + * SJA1105_SPEED_AUTO at runtime disables the port, so that is + * ok for power consumption in case AN will never complete - + * otherwise PHYLINK should come back with a new update. + */ + speed = priv->info->port_speed[SJA1105_SPEED_AUTO]; + break; + case SPEED_10: + speed = priv->info->port_speed[SJA1105_SPEED_10MBPS]; + break; + case SPEED_100: + speed = priv->info->port_speed[SJA1105_SPEED_100MBPS]; + break; + case SPEED_1000: + speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; + break; + case SPEED_2500: + speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; + break; + default: + dev_err(dev, "Invalid speed %iMbps\n", speed_mbps); + return -EINVAL; + } + + /* Overwrite SJA1105_SPEED_AUTO from the static MAC configuration + * table, since this will be used for the clocking setup, and we no + * longer need to store it in the static config (already told hardware + * we want auto during upload phase). + * Actually for the SGMII port, the MAC is fixed at 1 Gbps and + * we need to configure the PCS only (if even that). + */ + if (priv->phy_mode[port] == PHY_INTERFACE_MODE_SGMII) + mac[port].speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; + else if (priv->phy_mode[port] == PHY_INTERFACE_MODE_2500BASEX) + mac[port].speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; + else + mac[port].speed = speed; + + /* Write to the dynamic reconfiguration tables */ + rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); + if (rc < 0) { + dev_err(dev, "Failed to write MAC config: %d\n", rc); + return rc; + } + + /* Reconfigure the PLLs for the RGMII interfaces (required 125 MHz at + * gigabit, 25 MHz at 100 Mbps and 2.5 MHz at 10 Mbps). For MII and + * RMII no change of the clock setup is required. Actually, changing + * the clock setup does interrupt the clock signal for a certain time + * which causes trouble for all PHYs relying on this signal. + */ + if (!phy_interface_mode_is_rgmii(priv->phy_mode[port])) + return 0; + + return sja1105_clocking_setup_port(priv, port); +} + +static struct phylink_pcs * +sja1105_mac_select_pcs(struct dsa_switch *ds, int port, phy_interface_t iface) +{ + struct sja1105_private *priv = ds->priv; + struct dw_xpcs *xpcs = priv->xpcs[port]; + + if (xpcs) + return &xpcs->pcs; + + return NULL; +} + +static void sja1105_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + sja1105_inhibit_tx(ds->priv, BIT(port), true); +} + +static void sja1105_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct sja1105_private *priv = ds->priv; + + sja1105_adjust_port_config(priv, port, speed); + + sja1105_inhibit_tx(priv, BIT(port), false); +} + +static void sja1105_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_xmii_params_entry *mii; + phy_interface_t phy_mode; + + phy_mode = priv->phy_mode[port]; + if (phy_mode == PHY_INTERFACE_MODE_SGMII || + phy_mode == PHY_INTERFACE_MODE_2500BASEX) { + /* Changing the PHY mode on SERDES ports is possible and makes + * sense, because that is done through the XPCS. We allow + * changes between SGMII and 2500base-X. + */ + if (priv->info->supports_sgmii[port]) + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + + if (priv->info->supports_2500basex[port]) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + } else { + /* The SJA1105 MAC programming model is through the static + * config (the xMII Mode table cannot be dynamically + * reconfigured), and we have to program that early. + */ + __set_bit(phy_mode, config->supported_interfaces); + } + + /* The MAC does not support pause frames, and also doesn't + * support half-duplex traffic modes. + */ + config->mac_capabilities = MAC_10FD | MAC_100FD; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + if (mii->xmii_mode[port] == XMII_MODE_RGMII || + mii->xmii_mode[port] == XMII_MODE_SGMII) + config->mac_capabilities |= MAC_1000FD; + + if (priv->info->supports_2500basex[port]) + config->mac_capabilities |= MAC_2500FD; +} + +static int +sja1105_find_static_fdb_entry(struct sja1105_private *priv, int port, + const struct sja1105_l2_lookup_entry *requested) +{ + struct sja1105_l2_lookup_entry *l2_lookup; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + l2_lookup = table->entries; + + for (i = 0; i < table->entry_count; i++) + if (l2_lookup[i].macaddr == requested->macaddr && + l2_lookup[i].vlanid == requested->vlanid && + l2_lookup[i].destports & BIT(port)) + return i; + + return -1; +} + +/* We want FDB entries added statically through the bridge command to persist + * across switch resets, which are a common thing during normal SJA1105 + * operation. So we have to back them up in the static configuration tables + * and hence apply them on next static config upload... yay! + */ +static int +sja1105_static_fdb_change(struct sja1105_private *priv, int port, + const struct sja1105_l2_lookup_entry *requested, + bool keep) +{ + struct sja1105_l2_lookup_entry *l2_lookup; + struct sja1105_table *table; + int rc, match; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + + match = sja1105_find_static_fdb_entry(priv, port, requested); + if (match < 0) { + /* Can't delete a missing entry. */ + if (!keep) + return 0; + + /* No match => new entry */ + rc = sja1105_table_resize(table, table->entry_count + 1); + if (rc) + return rc; + + match = table->entry_count - 1; + } + + /* Assign pointer after the resize (it may be new memory) */ + l2_lookup = table->entries; + + /* We have a match. + * If the job was to add this FDB entry, it's already done (mostly + * anyway, since the port forwarding mask may have changed, case in + * which we update it). + * Otherwise we have to delete it. + */ + if (keep) { + l2_lookup[match] = *requested; + return 0; + } + + /* To remove, the strategy is to overwrite the element with + * the last one, and then reduce the array size by 1 + */ + l2_lookup[match] = l2_lookup[table->entry_count - 1]; + return sja1105_table_resize(table, table->entry_count - 1); +} + +/* First-generation switches have a 4-way set associative TCAM that + * holds the FDB entries. An FDB index spans from 0 to 1023 and is comprised of + * a "bin" (grouping of 4 entries) and a "way" (an entry within a bin). + * For the placement of a newly learnt FDB entry, the switch selects the bin + * based on a hash function, and the way within that bin incrementally. + */ +static int sja1105et_fdb_index(int bin, int way) +{ + return bin * SJA1105ET_FDB_BIN_SIZE + way; +} + +static int sja1105et_is_fdb_entry_in_bin(struct sja1105_private *priv, int bin, + const u8 *addr, u16 vid, + struct sja1105_l2_lookup_entry *match, + int *last_unused) +{ + int way; + + for (way = 0; way < SJA1105ET_FDB_BIN_SIZE; way++) { + struct sja1105_l2_lookup_entry l2_lookup = {0}; + int index = sja1105et_fdb_index(bin, way); + + /* Skip unused entries, optionally marking them + * into the return value + */ + if (sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + index, &l2_lookup)) { + if (last_unused) + *last_unused = way; + continue; + } + + if (l2_lookup.macaddr == ether_addr_to_u64(addr) && + l2_lookup.vlanid == vid) { + if (match) + *match = l2_lookup; + return way; + } + } + /* Return an invalid entry index if not found */ + return -1; +} + +int sja1105et_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}, tmp; + struct sja1105_private *priv = ds->priv; + struct device *dev = ds->dev; + int last_unused = -1; + int start, end, i; + int bin, way, rc; + + bin = sja1105et_fdb_hash(priv, addr, vid); + + way = sja1105et_is_fdb_entry_in_bin(priv, bin, addr, vid, + &l2_lookup, &last_unused); + if (way >= 0) { + /* We have an FDB entry. Is our port in the destination + * mask? If yes, we need to do nothing. If not, we need + * to rewrite the entry by adding this port to it. + */ + if ((l2_lookup.destports & BIT(port)) && l2_lookup.lockeds) + return 0; + l2_lookup.destports |= BIT(port); + } else { + int index = sja1105et_fdb_index(bin, way); + + /* We don't have an FDB entry. We construct a new one and + * try to find a place for it within the FDB table. + */ + l2_lookup.macaddr = ether_addr_to_u64(addr); + l2_lookup.destports = BIT(port); + l2_lookup.vlanid = vid; + + if (last_unused >= 0) { + way = last_unused; + } else { + /* Bin is full, need to evict somebody. + * Choose victim at random. If you get these messages + * often, you may need to consider changing the + * distribution function: + * static_config[BLK_IDX_L2_LOOKUP_PARAMS].entries->poly + */ + get_random_bytes(&way, sizeof(u8)); + way %= SJA1105ET_FDB_BIN_SIZE; + dev_warn(dev, "Warning, FDB bin %d full while adding entry for %pM. Evicting entry %u.\n", + bin, addr, way); + /* Evict entry */ + sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + index, NULL, false); + } + } + l2_lookup.lockeds = true; + l2_lookup.index = sja1105et_fdb_index(bin, way); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup.index, &l2_lookup, + true); + if (rc < 0) + return rc; + + /* Invalidate a dynamically learned entry if that exists */ + start = sja1105et_fdb_index(bin, 0); + end = sja1105et_fdb_index(bin, way); + + for (i = start; i < end; i++) { + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, &tmp); + if (rc == -ENOENT) + continue; + if (rc) + return rc; + + if (tmp.macaddr != ether_addr_to_u64(addr) || tmp.vlanid != vid) + continue; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + i, NULL, false); + if (rc) + return rc; + + break; + } + + return sja1105_static_fdb_change(priv, port, &l2_lookup, true); +} + +int sja1105et_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + int index, bin, way, rc; + bool keep; + + bin = sja1105et_fdb_hash(priv, addr, vid); + way = sja1105et_is_fdb_entry_in_bin(priv, bin, addr, vid, + &l2_lookup, NULL); + if (way < 0) + return 0; + index = sja1105et_fdb_index(bin, way); + + /* We have an FDB entry. Is our port in the destination mask? If yes, + * we need to remove it. If the resulting port mask becomes empty, we + * need to completely evict the FDB entry. + * Otherwise we just write it back. + */ + l2_lookup.destports &= ~BIT(port); + + if (l2_lookup.destports) + keep = true; + else + keep = false; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + index, &l2_lookup, keep); + if (rc < 0) + return rc; + + return sja1105_static_fdb_change(priv, port, &l2_lookup, keep); +} + +int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}, tmp; + struct sja1105_private *priv = ds->priv; + int rc, i; + + /* Search for an existing entry in the FDB table */ + l2_lookup.macaddr = ether_addr_to_u64(addr); + l2_lookup.vlanid = vid; + l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); + l2_lookup.mask_vlanid = VLAN_VID_MASK; + l2_lookup.destports = BIT(port); + + tmp = l2_lookup; + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + SJA1105_SEARCH, &tmp); + if (rc == 0 && tmp.index != SJA1105_MAX_L2_LOOKUP_COUNT - 1) { + /* Found a static entry and this port is already in the entry's + * port mask => job done + */ + if ((tmp.destports & BIT(port)) && tmp.lockeds) + return 0; + + l2_lookup = tmp; + + /* l2_lookup.index is populated by the switch in case it + * found something. + */ + l2_lookup.destports |= BIT(port); + goto skip_finding_an_index; + } + + /* Not found, so try to find an unused spot in the FDB. + * This is slightly inefficient because the strategy is knock-knock at + * every possible position from 0 to 1023. + */ + for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) { + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, NULL); + if (rc < 0) + break; + } + if (i == SJA1105_MAX_L2_LOOKUP_COUNT) { + dev_err(ds->dev, "FDB is full, cannot add entry.\n"); + return -EINVAL; + } + l2_lookup.index = i; + +skip_finding_an_index: + l2_lookup.lockeds = true; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup.index, &l2_lookup, + true); + if (rc < 0) + return rc; + + /* The switch learns dynamic entries and looks up the FDB left to + * right. It is possible that our addition was concurrent with the + * dynamic learning of the same address, so now that the static entry + * has been installed, we are certain that address learning for this + * particular address has been turned off, so the dynamic entry either + * is in the FDB at an index smaller than the static one, or isn't (it + * can also be at a larger index, but in that case it is inactive + * because the static FDB entry will match first, and the dynamic one + * will eventually age out). Search for a dynamically learned address + * prior to our static one and invalidate it. + */ + tmp = l2_lookup; + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + SJA1105_SEARCH, &tmp); + if (rc < 0) { + dev_err(ds->dev, + "port %d failed to read back entry for %pM vid %d: %pe\n", + port, addr, vid, ERR_PTR(rc)); + return rc; + } + + if (tmp.index < l2_lookup.index) { + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + tmp.index, NULL, false); + if (rc < 0) + return rc; + } + + return sja1105_static_fdb_change(priv, port, &l2_lookup, true); +} + +int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + bool keep; + int rc; + + l2_lookup.macaddr = ether_addr_to_u64(addr); + l2_lookup.vlanid = vid; + l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); + l2_lookup.mask_vlanid = VLAN_VID_MASK; + l2_lookup.destports = BIT(port); + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + SJA1105_SEARCH, &l2_lookup); + if (rc < 0) + return 0; + + l2_lookup.destports &= ~BIT(port); + + /* Decide whether we remove just this port from the FDB entry, + * or if we remove it completely. + */ + if (l2_lookup.destports) + keep = true; + else + keep = false; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup.index, &l2_lookup, keep); + if (rc < 0) + return rc; + + return sja1105_static_fdb_change(priv, port, &l2_lookup, keep); +} + +static int sja1105_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + if (!vid) { + switch (db.type) { + case DSA_DB_PORT: + vid = dsa_tag_8021q_standalone_vid(db.dp); + break; + case DSA_DB_BRIDGE: + vid = dsa_tag_8021q_bridge_vid(db.bridge.num); + break; + default: + return -EOPNOTSUPP; + } + } + + mutex_lock(&priv->fdb_lock); + rc = priv->info->fdb_add_cmd(ds, port, addr, vid); + mutex_unlock(&priv->fdb_lock); + + return rc; +} + +static int __sja1105_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + struct sja1105_private *priv = ds->priv; + + if (!vid) { + switch (db.type) { + case DSA_DB_PORT: + vid = dsa_tag_8021q_standalone_vid(db.dp); + break; + case DSA_DB_BRIDGE: + vid = dsa_tag_8021q_bridge_vid(db.bridge.num); + break; + default: + return -EOPNOTSUPP; + } + } + + return priv->info->fdb_del_cmd(ds, port, addr, vid); +} + +static int sja1105_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + mutex_lock(&priv->fdb_lock); + rc = __sja1105_fdb_del(ds, port, addr, vid, db); + mutex_unlock(&priv->fdb_lock); + + return rc; +} + +static int sja1105_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct sja1105_private *priv = ds->priv; + struct device *dev = ds->dev; + int i; + + for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) { + struct sja1105_l2_lookup_entry l2_lookup = {0}; + u8 macaddr[ETH_ALEN]; + int rc; + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, &l2_lookup); + /* No fdb entry at i, not an issue */ + if (rc == -ENOENT) + continue; + if (rc) { + dev_err(dev, "Failed to dump FDB: %d\n", rc); + return rc; + } + + /* FDB dump callback is per port. This means we have to + * disregard a valid entry if it's not for this port, even if + * only to revisit it later. This is inefficient because the + * 1024-sized FDB table needs to be traversed 4 times through + * SPI during a 'bridge fdb show' command. + */ + if (!(l2_lookup.destports & BIT(port))) + continue; + + u64_to_ether_addr(l2_lookup.macaddr, macaddr); + + /* Hardware FDB is shared for fdb and mdb, "bridge fdb show" + * only wants to see unicast + */ + if (is_multicast_ether_addr(macaddr)) + continue; + + /* We need to hide the dsa_8021q VLANs from the user. */ + if (vid_is_dsa_8021q(l2_lookup.vlanid)) + l2_lookup.vlanid = 0; + rc = cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data); + if (rc) + return rc; + } + return 0; +} + +static void sja1105_fast_age(struct dsa_switch *ds, int port) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct sja1105_private *priv = ds->priv; + struct dsa_db db = { + .type = DSA_DB_BRIDGE, + .bridge = { + .dev = dsa_port_bridge_dev_get(dp), + .num = dsa_port_bridge_num_get(dp), + }, + }; + int i; + + mutex_lock(&priv->fdb_lock); + + for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) { + struct sja1105_l2_lookup_entry l2_lookup = {0}; + u8 macaddr[ETH_ALEN]; + int rc; + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, &l2_lookup); + /* No fdb entry at i, not an issue */ + if (rc == -ENOENT) + continue; + if (rc) { + dev_err(ds->dev, "Failed to read FDB: %pe\n", + ERR_PTR(rc)); + break; + } + + if (!(l2_lookup.destports & BIT(port))) + continue; + + /* Don't delete static FDB entries */ + if (l2_lookup.lockeds) + continue; + + u64_to_ether_addr(l2_lookup.macaddr, macaddr); + + rc = __sja1105_fdb_del(ds, port, macaddr, l2_lookup.vlanid, db); + if (rc) { + dev_err(ds->dev, + "Failed to delete FDB entry %pM vid %lld: %pe\n", + macaddr, l2_lookup.vlanid, ERR_PTR(rc)); + break; + } + } + + mutex_unlock(&priv->fdb_lock); +} + +static int sja1105_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + return sja1105_fdb_add(ds, port, mdb->addr, mdb->vid, db); +} + +static int sja1105_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + return sja1105_fdb_del(ds, port, mdb->addr, mdb->vid, db); +} + +/* Common function for unicast and broadcast flood configuration. + * Flooding is configured between each {ingress, egress} port pair, and since + * the bridge's semantics are those of "egress flooding", it means we must + * enable flooding towards this port from all ingress ports that are in the + * same forwarding domain. + */ +static int sja1105_manage_flood_domains(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_entry *l2_fwd; + struct dsa_switch *ds = priv->ds; + int from, to, rc; + + l2_fwd = priv->static_config.tables[BLK_IDX_L2_FORWARDING].entries; + + for (from = 0; from < ds->num_ports; from++) { + u64 fl_domain = 0, bc_domain = 0; + + for (to = 0; to < priv->ds->num_ports; to++) { + if (!sja1105_can_forward(l2_fwd, from, to)) + continue; + + if (priv->ucast_egress_floods & BIT(to)) + fl_domain |= BIT(to); + if (priv->bcast_egress_floods & BIT(to)) + bc_domain |= BIT(to); + } + + /* Nothing changed, nothing to do */ + if (l2_fwd[from].fl_domain == fl_domain && + l2_fwd[from].bc_domain == bc_domain) + continue; + + l2_fwd[from].fl_domain = fl_domain; + l2_fwd[from].bc_domain = bc_domain; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + from, &l2_fwd[from], true); + if (rc < 0) + return rc; + } + + return 0; +} + +static int sja1105_bridge_member(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, bool member) +{ + struct sja1105_l2_forwarding_entry *l2_fwd; + struct sja1105_private *priv = ds->priv; + int i, rc; + + l2_fwd = priv->static_config.tables[BLK_IDX_L2_FORWARDING].entries; + + for (i = 0; i < ds->num_ports; i++) { + /* Add this port to the forwarding matrix of the + * other ports in the same bridge, and viceversa. + */ + if (!dsa_is_user_port(ds, i)) + continue; + /* For the ports already under the bridge, only one thing needs + * to be done, and that is to add this port to their + * reachability domain. So we can perform the SPI write for + * them immediately. However, for this port itself (the one + * that is new to the bridge), we need to add all other ports + * to its reachability domain. So we do that incrementally in + * this loop, and perform the SPI write only at the end, once + * the domain contains all other bridge ports. + */ + if (i == port) + continue; + if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) + continue; + sja1105_port_allow_traffic(l2_fwd, i, port, member); + sja1105_port_allow_traffic(l2_fwd, port, i, member); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + i, &l2_fwd[i], true); + if (rc < 0) + return rc; + } + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + port, &l2_fwd[port], true); + if (rc) + return rc; + + rc = sja1105_commit_pvid(ds, port); + if (rc) + return rc; + + return sja1105_manage_flood_domains(priv); +} + +static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct sja1105_private *priv = ds->priv; + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + switch (state) { + case BR_STATE_DISABLED: + case BR_STATE_BLOCKING: + /* From UM10944 description of DRPDTAG (why put this there?): + * "Management traffic flows to the port regardless of the state + * of the INGRESS flag". So BPDUs are still be allowed to pass. + * At the moment no difference between DISABLED and BLOCKING. + */ + mac[port].ingress = false; + mac[port].egress = false; + mac[port].dyn_learn = false; + break; + case BR_STATE_LISTENING: + mac[port].ingress = true; + mac[port].egress = false; + mac[port].dyn_learn = false; + break; + case BR_STATE_LEARNING: + mac[port].ingress = true; + mac[port].egress = false; + mac[port].dyn_learn = dp->learning; + break; + case BR_STATE_FORWARDING: + mac[port].ingress = true; + mac[port].egress = true; + mac[port].dyn_learn = dp->learning; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, + bool *tx_fwd_offload, + struct netlink_ext_ack *extack) +{ + int rc; + + rc = sja1105_bridge_member(ds, port, bridge, true); + if (rc) + return rc; + + rc = dsa_tag_8021q_bridge_join(ds, port, bridge); + if (rc) { + sja1105_bridge_member(ds, port, bridge, false); + return rc; + } + + *tx_fwd_offload = true; + + return 0; +} + +static void sja1105_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + dsa_tag_8021q_bridge_leave(ds, port, bridge); + sja1105_bridge_member(ds, port, bridge, false); +} + +#define BYTES_PER_KBIT (1000LL / 8) +/* Port 0 (the uC port) does not have CBS shapers */ +#define SJA1110_FIXED_CBS(port, prio) ((((port) - 1) * SJA1105_NUM_TC) + (prio)) + +static int sja1105_find_cbs_shaper(struct sja1105_private *priv, + int port, int prio) +{ + int i; + + if (priv->info->fixed_cbs_mapping) { + i = SJA1110_FIXED_CBS(port, prio); + if (i >= 0 && i < priv->info->num_cbs_shapers) + return i; + + return -1; + } + + for (i = 0; i < priv->info->num_cbs_shapers; i++) + if (priv->cbs[i].port == port && priv->cbs[i].prio == prio) + return i; + + return -1; +} + +static int sja1105_find_unused_cbs_shaper(struct sja1105_private *priv) +{ + int i; + + if (priv->info->fixed_cbs_mapping) + return -1; + + for (i = 0; i < priv->info->num_cbs_shapers; i++) + if (!priv->cbs[i].idle_slope && !priv->cbs[i].send_slope) + return i; + + return -1; +} + +static int sja1105_delete_cbs_shaper(struct sja1105_private *priv, int port, + int prio) +{ + int i; + + for (i = 0; i < priv->info->num_cbs_shapers; i++) { + struct sja1105_cbs_entry *cbs = &priv->cbs[i]; + + if (cbs->port == port && cbs->prio == prio) { + memset(cbs, 0, sizeof(*cbs)); + return sja1105_dynamic_config_write(priv, BLK_IDX_CBS, + i, cbs, true); + } + } + + return 0; +} + +static int sja1105_setup_tc_cbs(struct dsa_switch *ds, int port, + struct tc_cbs_qopt_offload *offload) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_cbs_entry *cbs; + s64 port_transmit_rate_kbps; + int index; + + if (!offload->enable) + return sja1105_delete_cbs_shaper(priv, port, offload->queue); + + /* The user may be replacing an existing shaper */ + index = sja1105_find_cbs_shaper(priv, port, offload->queue); + if (index < 0) { + /* That isn't the case - see if we can allocate a new one */ + index = sja1105_find_unused_cbs_shaper(priv); + if (index < 0) + return -ENOSPC; + } + + cbs = &priv->cbs[index]; + cbs->port = port; + cbs->prio = offload->queue; + /* locredit and sendslope are negative by definition. In hardware, + * positive values must be provided, and the negative sign is implicit. + */ + cbs->credit_hi = offload->hicredit; + cbs->credit_lo = abs(offload->locredit); + /* User space is in kbits/sec, while the hardware in bytes/sec times + * link speed. Since the given offload->sendslope is good only for the + * current link speed anyway, and user space is likely to reprogram it + * when that changes, don't even bother to track the port's link speed, + * but deduce the port transmit rate from idleslope - sendslope. + */ + port_transmit_rate_kbps = offload->idleslope - offload->sendslope; + cbs->idle_slope = div_s64(offload->idleslope * BYTES_PER_KBIT, + port_transmit_rate_kbps); + cbs->send_slope = div_s64(abs(offload->sendslope * BYTES_PER_KBIT), + port_transmit_rate_kbps); + /* Convert the negative values from 64-bit 2's complement + * to 32-bit 2's complement (for the case of 0x80000000 whose + * negative is still negative). + */ + cbs->credit_lo &= GENMASK_ULL(31, 0); + cbs->send_slope &= GENMASK_ULL(31, 0); + + return sja1105_dynamic_config_write(priv, BLK_IDX_CBS, index, cbs, + true); +} + +static int sja1105_reload_cbs(struct sja1105_private *priv) +{ + int rc = 0, i; + + /* The credit based shapers are only allocated if + * CONFIG_NET_SCH_CBS is enabled. + */ + if (!priv->cbs) + return 0; + + for (i = 0; i < priv->info->num_cbs_shapers; i++) { + struct sja1105_cbs_entry *cbs = &priv->cbs[i]; + + if (!cbs->idle_slope && !cbs->send_slope) + continue; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_CBS, i, cbs, + true); + if (rc) + break; + } + + return rc; +} + +static const char * const sja1105_reset_reasons[] = { + [SJA1105_VLAN_FILTERING] = "VLAN filtering", + [SJA1105_AGEING_TIME] = "Ageing time", + [SJA1105_SCHEDULING] = "Time-aware scheduling", + [SJA1105_BEST_EFFORT_POLICING] = "Best-effort policing", + [SJA1105_VIRTUAL_LINKS] = "Virtual links", +}; + +/* For situations where we need to change a setting at runtime that is only + * available through the static configuration, resetting the switch in order + * to upload the new static config is unavoidable. Back up the settings we + * modify at runtime (currently only MAC) and restore them after uploading, + * such that this operation is relatively seamless. + */ +int sja1105_static_config_reload(struct sja1105_private *priv, + enum sja1105_reset_reason reason) +{ + struct ptp_system_timestamp ptp_sts_before; + struct ptp_system_timestamp ptp_sts_after; + int speed_mbps[SJA1105_MAX_NUM_PORTS]; + u16 bmcr[SJA1105_MAX_NUM_PORTS] = {0}; + struct sja1105_mac_config_entry *mac; + struct dsa_switch *ds = priv->ds; + s64 t1, t2, t3, t4; + s64 t12, t34; + int rc, i; + s64 now; + + mutex_lock(&priv->fdb_lock); + mutex_lock(&priv->mgmt_lock); + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + /* Back up the dynamic link speed changed by sja1105_adjust_port_config + * in order to temporarily restore it to SJA1105_SPEED_AUTO - which the + * switch wants to see in the static config in order to allow us to + * change it through the dynamic interface later. + */ + for (i = 0; i < ds->num_ports; i++) { + speed_mbps[i] = sja1105_port_speed_to_ethtool(priv, + mac[i].speed); + mac[i].speed = priv->info->port_speed[SJA1105_SPEED_AUTO]; + + if (priv->xpcs[i]) + bmcr[i] = mdiobus_c45_read(priv->mdio_pcs, i, + MDIO_MMD_VEND2, MDIO_CTRL1); + } + + /* No PTP operations can run right now */ + mutex_lock(&priv->ptp_data.lock); + + rc = __sja1105_ptp_gettimex(ds, &now, &ptp_sts_before); + if (rc < 0) { + mutex_unlock(&priv->ptp_data.lock); + goto out; + } + + /* Reset switch and send updated static configuration */ + rc = sja1105_static_config_upload(priv); + if (rc < 0) { + mutex_unlock(&priv->ptp_data.lock); + goto out; + } + + rc = __sja1105_ptp_settime(ds, 0, &ptp_sts_after); + if (rc < 0) { + mutex_unlock(&priv->ptp_data.lock); + goto out; + } + + t1 = timespec64_to_ns(&ptp_sts_before.pre_ts); + t2 = timespec64_to_ns(&ptp_sts_before.post_ts); + t3 = timespec64_to_ns(&ptp_sts_after.pre_ts); + t4 = timespec64_to_ns(&ptp_sts_after.post_ts); + /* Mid point, corresponds to pre-reset PTPCLKVAL */ + t12 = t1 + (t2 - t1) / 2; + /* Mid point, corresponds to post-reset PTPCLKVAL, aka 0 */ + t34 = t3 + (t4 - t3) / 2; + /* Advance PTPCLKVAL by the time it took since its readout */ + now += (t34 - t12); + + __sja1105_ptp_adjtime(ds, now); + + mutex_unlock(&priv->ptp_data.lock); + + dev_info(priv->ds->dev, + "Reset switch and programmed static config. Reason: %s\n", + sja1105_reset_reasons[reason]); + + /* Configure the CGU (PLLs) for MII and RMII PHYs. + * For these interfaces there is no dynamic configuration + * needed, since PLLs have same settings at all speeds. + */ + if (priv->info->clocking_setup) { + rc = priv->info->clocking_setup(priv); + if (rc < 0) + goto out; + } + + for (i = 0; i < ds->num_ports; i++) { + struct dw_xpcs *xpcs = priv->xpcs[i]; + unsigned int neg_mode; + + rc = sja1105_adjust_port_config(priv, i, speed_mbps[i]); + if (rc < 0) + goto out; + + if (!xpcs) + continue; + + if (bmcr[i] & BMCR_ANENABLE) + neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; + else + neg_mode = PHYLINK_PCS_NEG_OUTBAND; + + rc = xpcs_do_config(xpcs, priv->phy_mode[i], NULL, neg_mode); + if (rc < 0) + goto out; + + if (neg_mode == PHYLINK_PCS_NEG_OUTBAND) { + int speed = SPEED_UNKNOWN; + + if (priv->phy_mode[i] == PHY_INTERFACE_MODE_2500BASEX) + speed = SPEED_2500; + else if (bmcr[i] & BMCR_SPEED1000) + speed = SPEED_1000; + else if (bmcr[i] & BMCR_SPEED100) + speed = SPEED_100; + else + speed = SPEED_10; + + xpcs_link_up(&xpcs->pcs, neg_mode, priv->phy_mode[i], + speed, DUPLEX_FULL); + } + } + + rc = sja1105_reload_cbs(priv); + if (rc < 0) + goto out; +out: + mutex_unlock(&priv->mgmt_lock); + mutex_unlock(&priv->fdb_lock); + + return rc; +} + +static enum dsa_tag_protocol +sja1105_get_tag_protocol(struct dsa_switch *ds, int port, + enum dsa_tag_protocol mp) +{ + struct sja1105_private *priv = ds->priv; + + return priv->info->tag_proto; +} + +/* The TPID setting belongs to the General Parameters table, + * which can only be partially reconfigured at runtime (and not the TPID). + * So a switch reset is required. + */ +int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, + struct netlink_ext_ack *extack) +{ + struct sja1105_general_params_entry *general_params; + struct sja1105_private *priv = ds->priv; + struct sja1105_table *table; + struct sja1105_rule *rule; + u16 tpid, tpid2; + int rc; + + list_for_each_entry(rule, &priv->flow_block.rules, list) { + if (rule->type == SJA1105_RULE_VL) { + NL_SET_ERR_MSG_MOD(extack, + "Cannot change VLAN filtering with active VL rules"); + return -EBUSY; + } + } + + if (enabled) { + /* Enable VLAN filtering. */ + tpid = ETH_P_8021Q; + tpid2 = ETH_P_8021AD; + } else { + /* Disable VLAN filtering. */ + tpid = ETH_P_SJA1105; + tpid2 = ETH_P_SJA1105; + } + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + general_params = table->entries; + /* EtherType used to identify inner tagged (C-tag) VLAN traffic */ + general_params->tpid = tpid; + /* EtherType used to identify outer tagged (S-tag) VLAN traffic */ + general_params->tpid2 = tpid2; + + for (port = 0; port < ds->num_ports; port++) { + if (dsa_is_unused_port(ds, port)) + continue; + + rc = sja1105_commit_pvid(ds, port); + if (rc) + return rc; + } + + rc = sja1105_static_config_reload(priv, SJA1105_VLAN_FILTERING); + if (rc) + NL_SET_ERR_MSG_MOD(extack, "Failed to change VLAN Ethertype"); + + return rc; +} + +static int sja1105_vlan_add(struct sja1105_private *priv, int port, u16 vid, + u16 flags, bool allowed_ingress) +{ + struct sja1105_vlan_lookup_entry *vlan; + struct sja1105_table *table; + int match, rc; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + match = sja1105_is_vlan_configured(priv, vid); + if (match < 0) { + rc = sja1105_table_resize(table, table->entry_count + 1); + if (rc) + return rc; + match = table->entry_count - 1; + } + + /* Assign pointer after the resize (it's new memory) */ + vlan = table->entries; + + vlan[match].type_entry = SJA1110_VLAN_D_TAG; + vlan[match].vlanid = vid; + vlan[match].vlan_bc |= BIT(port); + + if (allowed_ingress) + vlan[match].vmemb_port |= BIT(port); + else + vlan[match].vmemb_port &= ~BIT(port); + + if (flags & BRIDGE_VLAN_INFO_UNTAGGED) + vlan[match].tag_port &= ~BIT(port); + else + vlan[match].tag_port |= BIT(port); + + return sja1105_dynamic_config_write(priv, BLK_IDX_VLAN_LOOKUP, vid, + &vlan[match], true); +} + +static int sja1105_vlan_del(struct sja1105_private *priv, int port, u16 vid) +{ + struct sja1105_vlan_lookup_entry *vlan; + struct sja1105_table *table; + bool keep = true; + int match, rc; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + match = sja1105_is_vlan_configured(priv, vid); + /* Can't delete a missing entry. */ + if (match < 0) + return 0; + + /* Assign pointer after the resize (it's new memory) */ + vlan = table->entries; + + vlan[match].vlanid = vid; + vlan[match].vlan_bc &= ~BIT(port); + vlan[match].vmemb_port &= ~BIT(port); + /* Also unset tag_port, just so we don't have a confusing bitmap + * (no practical purpose). + */ + vlan[match].tag_port &= ~BIT(port); + + /* If there's no port left as member of this VLAN, + * it's time for it to go. + */ + if (!vlan[match].vmemb_port) + keep = false; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_VLAN_LOOKUP, vid, + &vlan[match], keep); + if (rc < 0) + return rc; + + if (!keep) + return sja1105_table_delete_entry(table, match); + + return 0; +} + +static int sja1105_bridge_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct sja1105_private *priv = ds->priv; + u16 flags = vlan->flags; + int rc; + + /* Be sure to deny alterations to the configuration done by tag_8021q. + */ + if (vid_is_dsa_8021q(vlan->vid)) { + NL_SET_ERR_MSG_MOD(extack, + "Range 3072-4095 reserved for dsa_8021q operation"); + return -EBUSY; + } + + /* Always install bridge VLANs as egress-tagged on CPU and DSA ports */ + if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) + flags = 0; + + rc = sja1105_vlan_add(priv, port, vlan->vid, flags, true); + if (rc) + return rc; + + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) + priv->bridge_pvid[port] = vlan->vid; + + return sja1105_commit_pvid(ds, port); +} + +static int sja1105_bridge_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + rc = sja1105_vlan_del(priv, port, vlan->vid); + if (rc) + return rc; + + /* In case the pvid was deleted, make sure that untagged packets will + * be dropped. + */ + return sja1105_commit_pvid(ds, port); +} + +static int sja1105_dsa_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid, + u16 flags) +{ + struct sja1105_private *priv = ds->priv; + bool allowed_ingress = true; + int rc; + + /* Prevent attackers from trying to inject a DSA tag from + * the outside world. + */ + if (dsa_is_user_port(ds, port)) + allowed_ingress = false; + + rc = sja1105_vlan_add(priv, port, vid, flags, allowed_ingress); + if (rc) + return rc; + + if (flags & BRIDGE_VLAN_INFO_PVID) + priv->tag_8021q_pvid[port] = vid; + + return sja1105_commit_pvid(ds, port); +} + +static int sja1105_dsa_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid) +{ + struct sja1105_private *priv = ds->priv; + + return sja1105_vlan_del(priv, port, vid); +} + +static int sja1105_prechangeupper(struct dsa_switch *ds, int port, + struct netdev_notifier_changeupper_info *info) +{ + struct netlink_ext_ack *extack = info->info.extack; + struct net_device *upper = info->upper_dev; + struct dsa_switch_tree *dst = ds->dst; + struct dsa_port *dp; + + if (is_vlan_dev(upper)) { + NL_SET_ERR_MSG_MOD(extack, "8021q uppers are not supported"); + return -EBUSY; + } + + if (netif_is_bridge_master(upper)) { + list_for_each_entry(dp, &dst->ports, list) { + struct net_device *br = dsa_port_bridge_dev_get(dp); + + if (br && br != upper && br_vlan_enabled(br)) { + NL_SET_ERR_MSG_MOD(extack, + "Only one VLAN-aware bridge is supported"); + return -EBUSY; + } + } + } + + return 0; +} + +static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot, + struct sk_buff *skb, bool takets) +{ + struct sja1105_mgmt_entry mgmt_route = {0}; + struct sja1105_private *priv = ds->priv; + struct ethhdr *hdr; + int timeout = 10; + int rc; + + hdr = eth_hdr(skb); + + mgmt_route.macaddr = ether_addr_to_u64(hdr->h_dest); + mgmt_route.destports = BIT(port); + mgmt_route.enfport = 1; + mgmt_route.tsreg = 0; + mgmt_route.takets = takets; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_MGMT_ROUTE, + slot, &mgmt_route, true); + if (rc < 0) { + kfree_skb(skb); + return rc; + } + + /* Transfer skb to the host port. */ + dsa_enqueue_skb(skb, dsa_to_port(ds, port)->slave); + + /* Wait until the switch has processed the frame */ + do { + rc = sja1105_dynamic_config_read(priv, BLK_IDX_MGMT_ROUTE, + slot, &mgmt_route); + if (rc < 0) { + dev_err_ratelimited(priv->ds->dev, + "failed to poll for mgmt route\n"); + continue; + } + + /* UM10944: The ENFPORT flag of the respective entry is + * cleared when a match is found. The host can use this + * flag as an acknowledgment. + */ + cpu_relax(); + } while (mgmt_route.enfport && --timeout); + + if (!timeout) { + /* Clean up the management route so that a follow-up + * frame may not match on it by mistake. + * This is only hardware supported on P/Q/R/S - on E/T it is + * a no-op and we are silently discarding the -EOPNOTSUPP. + */ + sja1105_dynamic_config_write(priv, BLK_IDX_MGMT_ROUTE, + slot, &mgmt_route, false); + dev_err_ratelimited(priv->ds->dev, "xmit timed out\n"); + } + + return NETDEV_TX_OK; +} + +#define work_to_xmit_work(w) \ + container_of((w), struct sja1105_deferred_xmit_work, work) + +/* Deferred work is unfortunately necessary because setting up the management + * route cannot be done from atomit context (SPI transfer takes a sleepable + * lock on the bus) + */ +static void sja1105_port_deferred_xmit(struct kthread_work *work) +{ + struct sja1105_deferred_xmit_work *xmit_work = work_to_xmit_work(work); + struct sk_buff *clone, *skb = xmit_work->skb; + struct dsa_switch *ds = xmit_work->dp->ds; + struct sja1105_private *priv = ds->priv; + int port = xmit_work->dp->index; + + clone = SJA1105_SKB_CB(skb)->clone; + + mutex_lock(&priv->mgmt_lock); + + sja1105_mgmt_xmit(ds, port, 0, skb, !!clone); + + /* The clone, if there, was made by dsa_skb_tx_timestamp */ + if (clone) + sja1105_ptp_txtstamp_skb(ds, port, clone); + + mutex_unlock(&priv->mgmt_lock); + + kfree(xmit_work); +} + +static int sja1105_connect_tag_protocol(struct dsa_switch *ds, + enum dsa_tag_protocol proto) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tagger_data *tagger_data; + + if (proto != priv->info->tag_proto) + return -EPROTONOSUPPORT; + + tagger_data = sja1105_tagger_data(ds); + tagger_data->xmit_work_fn = sja1105_port_deferred_xmit; + tagger_data->meta_tstamp_handler = sja1110_process_meta_tstamp; + + return 0; +} + +/* The MAXAGE setting belongs to the L2 Forwarding Parameters table, + * which cannot be reconfigured at runtime. So a switch reset is required. + */ +static int sja1105_set_ageing_time(struct dsa_switch *ds, + unsigned int ageing_time) +{ + struct sja1105_l2_lookup_params_entry *l2_lookup_params; + struct sja1105_private *priv = ds->priv; + struct sja1105_table *table; + unsigned int maxage; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + l2_lookup_params = table->entries; + + maxage = SJA1105_AGEING_TIME_MS(ageing_time); + + if (l2_lookup_params->maxage == maxage) + return 0; + + l2_lookup_params->maxage = maxage; + + return sja1105_static_config_reload(priv, SJA1105_AGEING_TIME); +} + +static int sja1105_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_private *priv = ds->priv; + + new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN; + + if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) + new_mtu += VLAN_HLEN; + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + if (policing[port].maxlen == new_mtu) + return 0; + + policing[port].maxlen = new_mtu; + + return sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); +} + +static int sja1105_get_max_mtu(struct dsa_switch *ds, int port) +{ + return 2043 - VLAN_ETH_HLEN - ETH_FCS_LEN; +} + +static int sja1105_port_setup_tc(struct dsa_switch *ds, int port, + enum tc_setup_type type, + void *type_data) +{ + switch (type) { + case TC_SETUP_QDISC_TAPRIO: + return sja1105_setup_tc_taprio(ds, port, type_data); + case TC_SETUP_QDISC_CBS: + return sja1105_setup_tc_cbs(ds, port, type_data); + default: + return -EOPNOTSUPP; + } +} + +/* We have a single mirror (@to) port, but can configure ingress and egress + * mirroring on all other (@from) ports. + * We need to allow mirroring rules only as long as the @to port is always the + * same, and we need to unset the @to port from mirr_port only when there is no + * mirroring rule that references it. + */ +static int sja1105_mirror_apply(struct sja1105_private *priv, int from, int to, + bool ingress, bool enabled) +{ + struct sja1105_general_params_entry *general_params; + struct sja1105_mac_config_entry *mac; + struct dsa_switch *ds = priv->ds; + struct sja1105_table *table; + bool already_enabled; + u64 new_mirr_port; + int rc; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + general_params = table->entries; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + already_enabled = (general_params->mirr_port != ds->num_ports); + if (already_enabled && enabled && general_params->mirr_port != to) { + dev_err(priv->ds->dev, + "Delete mirroring rules towards port %llu first\n", + general_params->mirr_port); + return -EBUSY; + } + + new_mirr_port = to; + if (!enabled) { + bool keep = false; + int port; + + /* Anybody still referencing mirr_port? */ + for (port = 0; port < ds->num_ports; port++) { + if (mac[port].ing_mirr || mac[port].egr_mirr) { + keep = true; + break; + } + } + /* Unset already_enabled for next time */ + if (!keep) + new_mirr_port = ds->num_ports; + } + if (new_mirr_port != general_params->mirr_port) { + general_params->mirr_port = new_mirr_port; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_GENERAL_PARAMS, + 0, general_params, true); + if (rc < 0) + return rc; + } + + if (ingress) + mac[from].ing_mirr = enabled; + else + mac[from].egr_mirr = enabled; + + return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, from, + &mac[from], true); +} + +static int sja1105_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress, struct netlink_ext_ack *extack) +{ + return sja1105_mirror_apply(ds->priv, port, mirror->to_local_port, + ingress, true); +} + +static void sja1105_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + sja1105_mirror_apply(ds->priv, port, mirror->to_local_port, + mirror->ingress, false); +} + +static int sja1105_port_policer_add(struct dsa_switch *ds, int port, + struct dsa_mall_policer_tc_entry *policer) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_private *priv = ds->priv; + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + /* In hardware, every 8 microseconds the credit level is incremented by + * the value of RATE bytes divided by 64, up to a maximum of SMAX + * bytes. + */ + policing[port].rate = div_u64(512 * policer->rate_bytes_per_sec, + 1000000); + policing[port].smax = policer->burst; + + return sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); +} + +static void sja1105_port_policer_del(struct dsa_switch *ds, int port) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_private *priv = ds->priv; + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + policing[port].rate = SJA1105_RATE_MBPS(1000); + policing[port].smax = 65535; + + sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); +} + +static int sja1105_port_set_learning(struct sja1105_private *priv, int port, + bool enabled) +{ + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + mac[port].dyn_learn = enabled; + + return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_port_ucast_bcast_flood(struct sja1105_private *priv, int to, + struct switchdev_brport_flags flags) +{ + if (flags.mask & BR_FLOOD) { + if (flags.val & BR_FLOOD) + priv->ucast_egress_floods |= BIT(to); + else + priv->ucast_egress_floods &= ~BIT(to); + } + + if (flags.mask & BR_BCAST_FLOOD) { + if (flags.val & BR_BCAST_FLOOD) + priv->bcast_egress_floods |= BIT(to); + else + priv->bcast_egress_floods &= ~BIT(to); + } + + return sja1105_manage_flood_domains(priv); +} + +static int sja1105_port_mcast_flood(struct sja1105_private *priv, int to, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct sja1105_l2_lookup_entry *l2_lookup; + struct sja1105_table *table; + int match, rc; + + mutex_lock(&priv->fdb_lock); + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + l2_lookup = table->entries; + + for (match = 0; match < table->entry_count; match++) + if (l2_lookup[match].macaddr == SJA1105_UNKNOWN_MULTICAST && + l2_lookup[match].mask_macaddr == SJA1105_UNKNOWN_MULTICAST) + break; + + if (match == table->entry_count) { + NL_SET_ERR_MSG_MOD(extack, + "Could not find FDB entry for unknown multicast"); + rc = -ENOSPC; + goto out; + } + + if (flags.val & BR_MCAST_FLOOD) + l2_lookup[match].destports |= BIT(to); + else + l2_lookup[match].destports &= ~BIT(to); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup[match].index, + &l2_lookup[match], true); +out: + mutex_unlock(&priv->fdb_lock); + + return rc; +} + +static int sja1105_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct sja1105_private *priv = ds->priv; + + if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | + BR_BCAST_FLOOD)) + return -EINVAL; + + if (flags.mask & (BR_FLOOD | BR_MCAST_FLOOD) && + !priv->info->can_limit_mcast_flood) { + bool multicast = !!(flags.val & BR_MCAST_FLOOD); + bool unicast = !!(flags.val & BR_FLOOD); + + if (unicast != multicast) { + NL_SET_ERR_MSG_MOD(extack, + "This chip cannot configure multicast flooding independently of unicast"); + return -EINVAL; + } + } + + return 0; +} + +static int sja1105_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + if (flags.mask & BR_LEARNING) { + bool learn_ena = !!(flags.val & BR_LEARNING); + + rc = sja1105_port_set_learning(priv, port, learn_ena); + if (rc) + return rc; + } + + if (flags.mask & (BR_FLOOD | BR_BCAST_FLOOD)) { + rc = sja1105_port_ucast_bcast_flood(priv, port, flags); + if (rc) + return rc; + } + + /* For chips that can't offload BR_MCAST_FLOOD independently, there + * is nothing to do here, we ensured the configuration is in sync by + * offloading BR_FLOOD. + */ + if (flags.mask & BR_MCAST_FLOOD && priv->info->can_limit_mcast_flood) { + rc = sja1105_port_mcast_flood(priv, port, flags, + extack); + if (rc) + return rc; + } + + return 0; +} + +/* The programming model for the SJA1105 switch is "all-at-once" via static + * configuration tables. Some of these can be dynamically modified at runtime, + * but not the xMII mode parameters table. + * Furthermode, some PHYs may not have crystals for generating their clocks + * (e.g. RMII). Instead, their 50MHz clock is supplied via the SJA1105 port's + * ref_clk pin. So port clocking needs to be initialized early, before + * connecting to PHYs is attempted, otherwise they won't respond through MDIO. + * Setting correct PHY link speed does not matter now. + * But dsa_slave_phy_setup is called later than sja1105_setup, so the PHY + * bindings are not yet parsed by DSA core. We need to parse early so that we + * can populate the xMII mode parameters table. + */ +static int sja1105_setup(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + if (priv->info->disable_microcontroller) { + rc = priv->info->disable_microcontroller(priv); + if (rc < 0) { + dev_err(ds->dev, + "Failed to disable microcontroller: %pe\n", + ERR_PTR(rc)); + return rc; + } + } + + /* Create and send configuration down to device */ + rc = sja1105_static_config_load(priv); + if (rc < 0) { + dev_err(ds->dev, "Failed to load static config: %d\n", rc); + return rc; + } + + /* Configure the CGU (PHY link modes and speeds) */ + if (priv->info->clocking_setup) { + rc = priv->info->clocking_setup(priv); + if (rc < 0) { + dev_err(ds->dev, + "Failed to configure MII clocking: %pe\n", + ERR_PTR(rc)); + goto out_static_config_free; + } + } + + sja1105_tas_setup(ds); + sja1105_flower_setup(ds); + + rc = sja1105_ptp_clock_register(ds); + if (rc < 0) { + dev_err(ds->dev, "Failed to register PTP clock: %d\n", rc); + goto out_flower_teardown; + } + + rc = sja1105_mdiobus_register(ds); + if (rc < 0) { + dev_err(ds->dev, "Failed to register MDIO bus: %pe\n", + ERR_PTR(rc)); + goto out_ptp_clock_unregister; + } + + rc = sja1105_devlink_setup(ds); + if (rc < 0) + goto out_mdiobus_unregister; + + rtnl_lock(); + rc = dsa_tag_8021q_register(ds, htons(ETH_P_8021Q)); + rtnl_unlock(); + if (rc) + goto out_devlink_teardown; + + /* On SJA1105, VLAN filtering per se is always enabled in hardware. + * The only thing we can do to disable it is lie about what the 802.1Q + * EtherType is. + * So it will still try to apply VLAN filtering, but all ingress + * traffic (except frames received with EtherType of ETH_P_SJA1105) + * will be internally tagged with a distorted VLAN header where the + * TPID is ETH_P_SJA1105, and the VLAN ID is the port pvid. + */ + ds->vlan_filtering_is_global = true; + ds->untag_bridge_pvid = true; + ds->fdb_isolation = true; + /* tag_8021q has 3 bits for the VBID, and the value 0 is reserved */ + ds->max_num_bridges = 7; + + /* Advertise the 8 egress queues */ + ds->num_tx_queues = SJA1105_NUM_TC; + + ds->mtu_enforcement_ingress = true; + ds->assisted_learning_on_cpu_port = true; + + return 0; + +out_devlink_teardown: + sja1105_devlink_teardown(ds); +out_mdiobus_unregister: + sja1105_mdiobus_unregister(ds); +out_ptp_clock_unregister: + sja1105_ptp_clock_unregister(ds); +out_flower_teardown: + sja1105_flower_teardown(ds); + sja1105_tas_teardown(ds); +out_static_config_free: + sja1105_static_config_free(&priv->static_config); + + return rc; +} + +static void sja1105_teardown(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + + rtnl_lock(); + dsa_tag_8021q_unregister(ds); + rtnl_unlock(); + + sja1105_devlink_teardown(ds); + sja1105_mdiobus_unregister(ds); + sja1105_ptp_clock_unregister(ds); + sja1105_flower_teardown(ds); + sja1105_tas_teardown(ds); + sja1105_static_config_free(&priv->static_config); +} + +static const struct dsa_switch_ops sja1105_switch_ops = { + .get_tag_protocol = sja1105_get_tag_protocol, + .connect_tag_protocol = sja1105_connect_tag_protocol, + .setup = sja1105_setup, + .teardown = sja1105_teardown, + .set_ageing_time = sja1105_set_ageing_time, + .port_change_mtu = sja1105_change_mtu, + .port_max_mtu = sja1105_get_max_mtu, + .phylink_get_caps = sja1105_phylink_get_caps, + .phylink_mac_select_pcs = sja1105_mac_select_pcs, + .phylink_mac_link_up = sja1105_mac_link_up, + .phylink_mac_link_down = sja1105_mac_link_down, + .get_strings = sja1105_get_strings, + .get_ethtool_stats = sja1105_get_ethtool_stats, + .get_sset_count = sja1105_get_sset_count, + .get_ts_info = sja1105_get_ts_info, + .port_fdb_dump = sja1105_fdb_dump, + .port_fdb_add = sja1105_fdb_add, + .port_fdb_del = sja1105_fdb_del, + .port_fast_age = sja1105_fast_age, + .port_bridge_join = sja1105_bridge_join, + .port_bridge_leave = sja1105_bridge_leave, + .port_pre_bridge_flags = sja1105_port_pre_bridge_flags, + .port_bridge_flags = sja1105_port_bridge_flags, + .port_stp_state_set = sja1105_bridge_stp_state_set, + .port_vlan_filtering = sja1105_vlan_filtering, + .port_vlan_add = sja1105_bridge_vlan_add, + .port_vlan_del = sja1105_bridge_vlan_del, + .port_mdb_add = sja1105_mdb_add, + .port_mdb_del = sja1105_mdb_del, + .port_hwtstamp_get = sja1105_hwtstamp_get, + .port_hwtstamp_set = sja1105_hwtstamp_set, + .port_rxtstamp = sja1105_port_rxtstamp, + .port_txtstamp = sja1105_port_txtstamp, + .port_setup_tc = sja1105_port_setup_tc, + .port_mirror_add = sja1105_mirror_add, + .port_mirror_del = sja1105_mirror_del, + .port_policer_add = sja1105_port_policer_add, + .port_policer_del = sja1105_port_policer_del, + .cls_flower_add = sja1105_cls_flower_add, + .cls_flower_del = sja1105_cls_flower_del, + .cls_flower_stats = sja1105_cls_flower_stats, + .devlink_info_get = sja1105_devlink_info_get, + .tag_8021q_vlan_add = sja1105_dsa_8021q_vlan_add, + .tag_8021q_vlan_del = sja1105_dsa_8021q_vlan_del, + .port_prechangeupper = sja1105_prechangeupper, +}; + +static const struct of_device_id sja1105_dt_ids[]; + +static int sja1105_check_device_id(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 prod_id[SJA1105_SIZE_DEVICE_ID] = {0}; + struct device *dev = &priv->spidev->dev; + const struct of_device_id *match; + u32 device_id; + u64 part_no; + int rc; + + rc = sja1105_xfer_u32(priv, SPI_READ, regs->device_id, &device_id, + NULL); + if (rc < 0) + return rc; + + rc = sja1105_xfer_buf(priv, SPI_READ, regs->prod_id, prod_id, + SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID); + + for (match = sja1105_dt_ids; match->compatible[0]; match++) { + const struct sja1105_info *info = match->data; + + /* Is what's been probed in our match table at all? */ + if (info->device_id != device_id || info->part_no != part_no) + continue; + + /* But is it what's in the device tree? */ + if (priv->info->device_id != device_id || + priv->info->part_no != part_no) { + dev_warn(dev, "Device tree specifies chip %s but found %s, please fix it!\n", + priv->info->name, info->name); + /* It isn't. No problem, pick that up. */ + priv->info = info; + } + + return 0; + } + + dev_err(dev, "Unexpected {device ID, part number}: 0x%x 0x%llx\n", + device_id, part_no); + + return -ENODEV; +} + +static int sja1105_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct sja1105_private *priv; + size_t max_xfer, max_msg; + struct dsa_switch *ds; + int rc; + + if (!dev->of_node) { + dev_err(dev, "No DTS bindings for SJA1105 driver\n"); + return -EINVAL; + } + + rc = sja1105_hw_reset(dev, 1, 1); + if (rc) + return rc; + + priv = devm_kzalloc(dev, sizeof(struct sja1105_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Populate our driver private structure (priv) based on + * the device tree node that was probed (spi) + */ + priv->spidev = spi; + spi_set_drvdata(spi, priv); + + /* Configure the SPI bus */ + spi->bits_per_word = 8; + rc = spi_setup(spi); + if (rc < 0) { + dev_err(dev, "Could not init SPI\n"); + return rc; + } + + /* In sja1105_xfer, we send spi_messages composed of two spi_transfers: + * a small one for the message header and another one for the current + * chunk of the packed buffer. + * Check that the restrictions imposed by the SPI controller are + * respected: the chunk buffer is smaller than the max transfer size, + * and the total length of the chunk plus its message header is smaller + * than the max message size. + * We do that during probe time since the maximum transfer size is a + * runtime invariant. + */ + max_xfer = spi_max_transfer_size(spi); + max_msg = spi_max_message_size(spi); + + /* We need to send at least one 64-bit word of SPI payload per message + * in order to be able to make useful progress. + */ + if (max_msg < SJA1105_SIZE_SPI_MSG_HEADER + 8) { + dev_err(dev, "SPI master cannot send large enough buffers, aborting\n"); + return -EINVAL; + } + + priv->max_xfer_len = SJA1105_SIZE_SPI_MSG_MAXLEN; + if (priv->max_xfer_len > max_xfer) + priv->max_xfer_len = max_xfer; + if (priv->max_xfer_len > max_msg - SJA1105_SIZE_SPI_MSG_HEADER) + priv->max_xfer_len = max_msg - SJA1105_SIZE_SPI_MSG_HEADER; + + priv->info = of_device_get_match_data(dev); + + /* Detect hardware device */ + rc = sja1105_check_device_id(priv); + if (rc < 0) { + dev_err(dev, "Device ID check failed: %d\n", rc); + return rc; + } + + dev_info(dev, "Probed switch chip: %s\n", priv->info->name); + + ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL); + if (!ds) + return -ENOMEM; + + ds->dev = dev; + ds->num_ports = priv->info->num_ports; + ds->ops = &sja1105_switch_ops; + ds->priv = priv; + priv->ds = ds; + + mutex_init(&priv->ptp_data.lock); + mutex_init(&priv->dynamic_config_lock); + mutex_init(&priv->mgmt_lock); + mutex_init(&priv->fdb_lock); + spin_lock_init(&priv->ts_id_lock); + + rc = sja1105_parse_dt(priv); + if (rc < 0) { + dev_err(ds->dev, "Failed to parse DT: %d\n", rc); + return rc; + } + + if (IS_ENABLED(CONFIG_NET_SCH_CBS)) { + priv->cbs = devm_kcalloc(dev, priv->info->num_cbs_shapers, + sizeof(struct sja1105_cbs_entry), + GFP_KERNEL); + if (!priv->cbs) + return -ENOMEM; + } + + return dsa_register_switch(priv->ds); +} + +static void sja1105_remove(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + if (!priv) + return; + + dsa_unregister_switch(priv->ds); +} + +static void sja1105_shutdown(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + spi_set_drvdata(spi, NULL); +} + +static const struct of_device_id sja1105_dt_ids[] = { + { .compatible = "nxp,sja1105e", .data = &sja1105e_info }, + { .compatible = "nxp,sja1105t", .data = &sja1105t_info }, + { .compatible = "nxp,sja1105p", .data = &sja1105p_info }, + { .compatible = "nxp,sja1105q", .data = &sja1105q_info }, + { .compatible = "nxp,sja1105r", .data = &sja1105r_info }, + { .compatible = "nxp,sja1105s", .data = &sja1105s_info }, + { .compatible = "nxp,sja1110a", .data = &sja1110a_info }, + { .compatible = "nxp,sja1110b", .data = &sja1110b_info }, + { .compatible = "nxp,sja1110c", .data = &sja1110c_info }, + { .compatible = "nxp,sja1110d", .data = &sja1110d_info }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, sja1105_dt_ids); + +static const struct spi_device_id sja1105_spi_ids[] = { + { "sja1105e" }, + { "sja1105t" }, + { "sja1105p" }, + { "sja1105q" }, + { "sja1105r" }, + { "sja1105s" }, + { "sja1110a" }, + { "sja1110b" }, + { "sja1110c" }, + { "sja1110d" }, + { }, +}; +MODULE_DEVICE_TABLE(spi, sja1105_spi_ids); + +static struct spi_driver sja1105_driver = { + .driver = { + .name = "sja1105", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sja1105_dt_ids), + }, + .id_table = sja1105_spi_ids, + .probe = sja1105_probe, + .remove = sja1105_remove, + .shutdown = sja1105_shutdown, +}; + +module_spi_driver(sja1105_driver); + +MODULE_AUTHOR("Vladimir Oltean <olteanv@gmail.com>"); +MODULE_AUTHOR("Georg Waibel <georg.waibel@sensor-technik.de>"); +MODULE_DESCRIPTION("SJA1105 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c new file mode 100644 index 0000000000..833e55e4b9 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_mdio.c @@ -0,0 +1,513 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2021 NXP + */ +#include <linux/pcs/pcs-xpcs.h> +#include <linux/of_mdio.h> +#include "sja1105.h" + +#define SJA1110_PCS_BANK_REG SJA1110_SPI_ADDR(0x3fc) + +int sja1105_pcs_mdio_read_c45(struct mii_bus *bus, int phy, int mmd, int reg) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + u64 addr; + u32 tmp; + int rc; + + addr = (mmd << 16) | reg; + + if (mmd != MDIO_MMD_VEND1 && mmd != MDIO_MMD_VEND2) + return 0xffff; + + if (mmd == MDIO_MMD_VEND2 && (reg & GENMASK(15, 0)) == MII_PHYSID1) + return NXP_SJA1105_XPCS_ID >> 16; + if (mmd == MDIO_MMD_VEND2 && (reg & GENMASK(15, 0)) == MII_PHYSID2) + return NXP_SJA1105_XPCS_ID & GENMASK(15, 0); + + rc = sja1105_xfer_u32(priv, SPI_READ, addr, &tmp, NULL); + if (rc < 0) + return rc; + + return tmp & 0xffff; +} + +int sja1105_pcs_mdio_write_c45(struct mii_bus *bus, int phy, int mmd, + int reg, u16 val) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + u64 addr; + u32 tmp; + + addr = (mmd << 16) | reg; + tmp = val; + + if (mmd != MDIO_MMD_VEND1 && mmd != MDIO_MMD_VEND2) + return -EINVAL; + + return sja1105_xfer_u32(priv, SPI_WRITE, addr, &tmp, NULL); +} + +int sja1110_pcs_mdio_read_c45(struct mii_bus *bus, int phy, int mmd, int reg) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + const struct sja1105_regs *regs = priv->info->regs; + int offset, bank; + u64 addr; + u32 tmp; + int rc; + + if (regs->pcs_base[phy] == SJA1105_RSV_ADDR) + return -ENODEV; + + addr = (mmd << 16) | reg; + + if (mmd == MDIO_MMD_VEND2 && (reg & GENMASK(15, 0)) == MII_PHYSID1) + return NXP_SJA1110_XPCS_ID >> 16; + if (mmd == MDIO_MMD_VEND2 && (reg & GENMASK(15, 0)) == MII_PHYSID2) + return NXP_SJA1110_XPCS_ID & GENMASK(15, 0); + + bank = addr >> 8; + offset = addr & GENMASK(7, 0); + + /* This addressing scheme reserves register 0xff for the bank address + * register, so that can never be addressed. + */ + if (WARN_ON(offset == 0xff)) + return -ENODEV; + + tmp = bank; + + rc = sja1105_xfer_u32(priv, SPI_WRITE, + regs->pcs_base[phy] + SJA1110_PCS_BANK_REG, + &tmp, NULL); + if (rc < 0) + return rc; + + rc = sja1105_xfer_u32(priv, SPI_READ, regs->pcs_base[phy] + offset, + &tmp, NULL); + if (rc < 0) + return rc; + + return tmp & 0xffff; +} + +int sja1110_pcs_mdio_write_c45(struct mii_bus *bus, int phy, int reg, int mmd, + u16 val) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + const struct sja1105_regs *regs = priv->info->regs; + int offset, bank; + u64 addr; + u32 tmp; + int rc; + + if (regs->pcs_base[phy] == SJA1105_RSV_ADDR) + return -ENODEV; + + addr = (mmd << 16) | reg; + + bank = addr >> 8; + offset = addr & GENMASK(7, 0); + + /* This addressing scheme reserves register 0xff for the bank address + * register, so that can never be addressed. + */ + if (WARN_ON(offset == 0xff)) + return -ENODEV; + + tmp = bank; + + rc = sja1105_xfer_u32(priv, SPI_WRITE, + regs->pcs_base[phy] + SJA1110_PCS_BANK_REG, + &tmp, NULL); + if (rc < 0) + return rc; + + tmp = val; + + return sja1105_xfer_u32(priv, SPI_WRITE, regs->pcs_base[phy] + offset, + &tmp, NULL); +} + +enum sja1105_mdio_opcode { + SJA1105_C45_ADDR = 0, + SJA1105_C22 = 1, + SJA1105_C45_DATA = 2, + SJA1105_C45_DATA_AUTOINC = 3, +}; + +static u64 sja1105_base_t1_encode_addr(struct sja1105_private *priv, + int phy, enum sja1105_mdio_opcode op, + int xad) +{ + const struct sja1105_regs *regs = priv->info->regs; + + return regs->mdio_100base_t1 | (phy << 7) | (op << 5) | (xad << 0); +} + +static int sja1105_base_t1_mdio_read_c22(struct mii_bus *bus, int phy, int reg) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + u64 addr; + u32 tmp; + int rc; + + addr = sja1105_base_t1_encode_addr(priv, phy, SJA1105_C22, reg & 0x1f); + + rc = sja1105_xfer_u32(priv, SPI_READ, addr, &tmp, NULL); + if (rc < 0) + return rc; + + return tmp & 0xffff; +} + +static int sja1105_base_t1_mdio_read_c45(struct mii_bus *bus, int phy, + int mmd, int reg) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + u64 addr; + u32 tmp; + int rc; + + addr = sja1105_base_t1_encode_addr(priv, phy, SJA1105_C45_ADDR, mmd); + + rc = sja1105_xfer_u32(priv, SPI_WRITE, addr, ®, NULL); + if (rc < 0) + return rc; + + addr = sja1105_base_t1_encode_addr(priv, phy, SJA1105_C45_DATA, mmd); + + rc = sja1105_xfer_u32(priv, SPI_READ, addr, &tmp, NULL); + if (rc < 0) + return rc; + + return tmp & 0xffff; +} + +static int sja1105_base_t1_mdio_write_c22(struct mii_bus *bus, int phy, int reg, + u16 val) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + u64 addr; + u32 tmp; + + addr = sja1105_base_t1_encode_addr(priv, phy, SJA1105_C22, reg & 0x1f); + + tmp = val & 0xffff; + + return sja1105_xfer_u32(priv, SPI_WRITE, addr, &tmp, NULL); +} + +static int sja1105_base_t1_mdio_write_c45(struct mii_bus *bus, int phy, + int mmd, int reg, u16 val) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + u64 addr; + u32 tmp; + int rc; + + addr = sja1105_base_t1_encode_addr(priv, phy, SJA1105_C45_ADDR, mmd); + + rc = sja1105_xfer_u32(priv, SPI_WRITE, addr, ®, NULL); + if (rc < 0) + return rc; + + addr = sja1105_base_t1_encode_addr(priv, phy, SJA1105_C45_DATA, mmd); + + tmp = val & 0xffff; + + return sja1105_xfer_u32(priv, SPI_WRITE, addr, &tmp, NULL); +} + +static int sja1105_base_tx_mdio_read(struct mii_bus *bus, int phy, int reg) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + const struct sja1105_regs *regs = priv->info->regs; + u32 tmp; + int rc; + + rc = sja1105_xfer_u32(priv, SPI_READ, regs->mdio_100base_tx + reg, + &tmp, NULL); + if (rc < 0) + return rc; + + return tmp & 0xffff; +} + +static int sja1105_base_tx_mdio_write(struct mii_bus *bus, int phy, int reg, + u16 val) +{ + struct sja1105_mdio_private *mdio_priv = bus->priv; + struct sja1105_private *priv = mdio_priv->priv; + const struct sja1105_regs *regs = priv->info->regs; + u32 tmp = val; + + return sja1105_xfer_u32(priv, SPI_WRITE, regs->mdio_100base_tx + reg, + &tmp, NULL); +} + +static int sja1105_mdiobus_base_tx_register(struct sja1105_private *priv, + struct device_node *mdio_node) +{ + struct sja1105_mdio_private *mdio_priv; + struct device_node *np; + struct mii_bus *bus; + int rc = 0; + + np = of_get_compatible_child(mdio_node, "nxp,sja1110-base-tx-mdio"); + if (!np) + return 0; + + if (!of_device_is_available(np)) + goto out_put_np; + + bus = mdiobus_alloc_size(sizeof(*mdio_priv)); + if (!bus) { + rc = -ENOMEM; + goto out_put_np; + } + + bus->name = "SJA1110 100base-TX MDIO bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-base-tx", + dev_name(priv->ds->dev)); + bus->read = sja1105_base_tx_mdio_read; + bus->write = sja1105_base_tx_mdio_write; + bus->parent = priv->ds->dev; + mdio_priv = bus->priv; + mdio_priv->priv = priv; + + rc = of_mdiobus_register(bus, np); + if (rc) { + mdiobus_free(bus); + goto out_put_np; + } + + priv->mdio_base_tx = bus; + +out_put_np: + of_node_put(np); + + return rc; +} + +static void sja1105_mdiobus_base_tx_unregister(struct sja1105_private *priv) +{ + if (!priv->mdio_base_tx) + return; + + mdiobus_unregister(priv->mdio_base_tx); + mdiobus_free(priv->mdio_base_tx); + priv->mdio_base_tx = NULL; +} + +static int sja1105_mdiobus_base_t1_register(struct sja1105_private *priv, + struct device_node *mdio_node) +{ + struct sja1105_mdio_private *mdio_priv; + struct device_node *np; + struct mii_bus *bus; + int rc = 0; + + np = of_get_compatible_child(mdio_node, "nxp,sja1110-base-t1-mdio"); + if (!np) + return 0; + + if (!of_device_is_available(np)) + goto out_put_np; + + bus = mdiobus_alloc_size(sizeof(*mdio_priv)); + if (!bus) { + rc = -ENOMEM; + goto out_put_np; + } + + bus->name = "SJA1110 100base-T1 MDIO bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-base-t1", + dev_name(priv->ds->dev)); + bus->read = sja1105_base_t1_mdio_read_c22; + bus->write = sja1105_base_t1_mdio_write_c22; + bus->read_c45 = sja1105_base_t1_mdio_read_c45; + bus->write_c45 = sja1105_base_t1_mdio_write_c45; + bus->parent = priv->ds->dev; + mdio_priv = bus->priv; + mdio_priv->priv = priv; + + rc = of_mdiobus_register(bus, np); + if (rc) { + mdiobus_free(bus); + goto out_put_np; + } + + priv->mdio_base_t1 = bus; + +out_put_np: + of_node_put(np); + + return rc; +} + +static void sja1105_mdiobus_base_t1_unregister(struct sja1105_private *priv) +{ + if (!priv->mdio_base_t1) + return; + + mdiobus_unregister(priv->mdio_base_t1); + mdiobus_free(priv->mdio_base_t1); + priv->mdio_base_t1 = NULL; +} + +static int sja1105_mdiobus_pcs_register(struct sja1105_private *priv) +{ + struct sja1105_mdio_private *mdio_priv; + struct dsa_switch *ds = priv->ds; + struct mii_bus *bus; + int rc = 0; + int port; + + if (!priv->info->pcs_mdio_read_c45 || !priv->info->pcs_mdio_write_c45) + return 0; + + bus = mdiobus_alloc_size(sizeof(*mdio_priv)); + if (!bus) + return -ENOMEM; + + bus->name = "SJA1105 PCS MDIO bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-pcs", + dev_name(ds->dev)); + bus->read_c45 = priv->info->pcs_mdio_read_c45; + bus->write_c45 = priv->info->pcs_mdio_write_c45; + bus->parent = ds->dev; + /* There is no PHY on this MDIO bus => mask out all PHY addresses + * from auto probing. + */ + bus->phy_mask = ~0; + mdio_priv = bus->priv; + mdio_priv->priv = priv; + + rc = mdiobus_register(bus); + if (rc) { + mdiobus_free(bus); + return rc; + } + + for (port = 0; port < ds->num_ports; port++) { + struct dw_xpcs *xpcs; + + if (dsa_is_unused_port(ds, port)) + continue; + + if (priv->phy_mode[port] != PHY_INTERFACE_MODE_SGMII && + priv->phy_mode[port] != PHY_INTERFACE_MODE_2500BASEX) + continue; + + xpcs = xpcs_create_mdiodev(bus, port, priv->phy_mode[port]); + if (IS_ERR(xpcs)) { + rc = PTR_ERR(xpcs); + goto out_pcs_free; + } + + priv->xpcs[port] = xpcs; + } + + priv->mdio_pcs = bus; + + return 0; + +out_pcs_free: + for (port = 0; port < ds->num_ports; port++) { + if (!priv->xpcs[port]) + continue; + + xpcs_destroy(priv->xpcs[port]); + priv->xpcs[port] = NULL; + } + + mdiobus_unregister(bus); + mdiobus_free(bus); + + return rc; +} + +static void sja1105_mdiobus_pcs_unregister(struct sja1105_private *priv) +{ + struct dsa_switch *ds = priv->ds; + int port; + + if (!priv->mdio_pcs) + return; + + for (port = 0; port < ds->num_ports; port++) { + if (!priv->xpcs[port]) + continue; + + xpcs_destroy(priv->xpcs[port]); + priv->xpcs[port] = NULL; + } + + mdiobus_unregister(priv->mdio_pcs); + mdiobus_free(priv->mdio_pcs); + priv->mdio_pcs = NULL; +} + +int sja1105_mdiobus_register(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + const struct sja1105_regs *regs = priv->info->regs; + struct device_node *switch_node = ds->dev->of_node; + struct device_node *mdio_node; + int rc; + + rc = sja1105_mdiobus_pcs_register(priv); + if (rc) + return rc; + + mdio_node = of_get_child_by_name(switch_node, "mdios"); + if (!mdio_node) + return 0; + + if (!of_device_is_available(mdio_node)) + goto out_put_mdio_node; + + if (regs->mdio_100base_tx != SJA1105_RSV_ADDR) { + rc = sja1105_mdiobus_base_tx_register(priv, mdio_node); + if (rc) + goto err_put_mdio_node; + } + + if (regs->mdio_100base_t1 != SJA1105_RSV_ADDR) { + rc = sja1105_mdiobus_base_t1_register(priv, mdio_node); + if (rc) + goto err_free_base_tx_mdiobus; + } + +out_put_mdio_node: + of_node_put(mdio_node); + + return 0; + +err_free_base_tx_mdiobus: + sja1105_mdiobus_base_tx_unregister(priv); +err_put_mdio_node: + of_node_put(mdio_node); + sja1105_mdiobus_pcs_unregister(priv); + + return rc; +} + +void sja1105_mdiobus_unregister(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + + sja1105_mdiobus_base_t1_unregister(priv); + sja1105_mdiobus_base_tx_unregister(priv); + sja1105_mdiobus_pcs_unregister(priv); +} diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c new file mode 100644 index 0000000000..a7d41e7813 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -0,0 +1,974 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include <linux/spi/spi.h> +#include "sja1105.h" + +/* The adjfine API clamps ppb between [-32,768,000, 32,768,000], and + * therefore scaled_ppm between [-2,147,483,648, 2,147,483,647]. + * Set the maximum supported ppb to a round value smaller than the maximum. + * + * Percentually speaking, this is a +/- 0.032x adjustment of the + * free-running counter (0.968x to 1.032x). + */ +#define SJA1105_MAX_ADJ_PPB 32000000 +#define SJA1105_SIZE_PTP_CMD 4 + +/* PTPSYNCTS has no interrupt or update mechanism, because the intended + * hardware use case is for the timestamp to be collected synchronously, + * immediately after the CAS_MASTER SJA1105 switch has performed a CASSYNC + * one-shot toggle (no return to level) on the PTP_CLK pin. When used as a + * generic extts source, the PTPSYNCTS register needs polling and a comparison + * with the old value. The polling interval is configured as the Nyquist rate + * of a signal with 50% duty cycle and 1Hz frequency, which is sadly all that + * this hardware can do (but may be enough for some setups). Anything of higher + * frequency than 1 Hz will be lost, since there is no timestamp FIFO. + */ +#define SJA1105_EXTTS_INTERVAL (HZ / 6) + +/* This range is actually +/- SJA1105_MAX_ADJ_PPB + * divided by 1000 (ppb -> ppm) and with a 16-bit + * "fractional" part (actually fixed point). + * | + * v + * Convert scaled_ppm from the +/- ((10^6) << 16) range + * into the +/- (1 << 31) range. + * + * This forgoes a "ppb" numeric representation (up to NSEC_PER_SEC) + * and defines the scaling factor between scaled_ppm and the actual + * frequency adjustments of the PHC. + * + * ptpclkrate = scaled_ppm * 2^31 / (10^6 * 2^16) + * simplifies to + * ptpclkrate = scaled_ppm * 2^9 / 5^6 + */ +#define SJA1105_CC_MULT_NUM (1 << 9) +#define SJA1105_CC_MULT_DEM 15625 +#define SJA1105_CC_MULT 0x80000000 + +enum sja1105_ptp_clk_mode { + PTP_ADD_MODE = 1, + PTP_SET_MODE = 0, +}; + +#define extts_to_data(t) \ + container_of((t), struct sja1105_ptp_data, extts_timer) +#define ptp_caps_to_data(d) \ + container_of((d), struct sja1105_ptp_data, caps) +#define ptp_data_to_sja1105(d) \ + container_of((d), struct sja1105_private, ptp_data) + +int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr) +{ + struct sja1105_private *priv = ds->priv; + struct hwtstamp_config config; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + switch (config.tx_type) { + case HWTSTAMP_TX_OFF: + priv->hwts_tx_en &= ~BIT(port); + break; + case HWTSTAMP_TX_ON: + priv->hwts_tx_en |= BIT(port); + break; + default: + return -ERANGE; + } + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + priv->hwts_rx_en &= ~BIT(port); + break; + default: + priv->hwts_rx_en |= BIT(port); + break; + } + + if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) + return -EFAULT; + return 0; +} + +int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) +{ + struct sja1105_private *priv = ds->priv; + struct hwtstamp_config config; + + config.flags = 0; + if (priv->hwts_tx_en & BIT(port)) + config.tx_type = HWTSTAMP_TX_ON; + else + config.tx_type = HWTSTAMP_TX_OFF; + if (priv->hwts_rx_en & BIT(port)) + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + else + config.rx_filter = HWTSTAMP_FILTER_NONE; + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +int sja1105_get_ts_info(struct dsa_switch *ds, int port, + struct ethtool_ts_info *info) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + + /* Called during cleanup */ + if (!ptp_data->clock) + return -ENODEV; + + info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + info->tx_types = (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT); + info->phc_index = ptp_clock_index(ptp_data->clock); + return 0; +} + +void sja1105et_ptp_cmd_packing(u8 *buf, struct sja1105_ptp_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_PTP_CMD; + /* No need to keep this as part of the structure */ + u64 valid = 1; + + sja1105_packing(buf, &valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->ptpstrtsch, 30, 30, size, op); + sja1105_packing(buf, &cmd->ptpstopsch, 29, 29, size, op); + sja1105_packing(buf, &cmd->startptpcp, 28, 28, size, op); + sja1105_packing(buf, &cmd->stopptpcp, 27, 27, size, op); + sja1105_packing(buf, &cmd->resptp, 2, 2, size, op); + sja1105_packing(buf, &cmd->corrclk4ts, 1, 1, size, op); + sja1105_packing(buf, &cmd->ptpclkadd, 0, 0, size, op); +} + +void sja1105pqrs_ptp_cmd_packing(u8 *buf, struct sja1105_ptp_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_PTP_CMD; + /* No need to keep this as part of the structure */ + u64 valid = 1; + + sja1105_packing(buf, &valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->ptpstrtsch, 30, 30, size, op); + sja1105_packing(buf, &cmd->ptpstopsch, 29, 29, size, op); + sja1105_packing(buf, &cmd->startptpcp, 28, 28, size, op); + sja1105_packing(buf, &cmd->stopptpcp, 27, 27, size, op); + sja1105_packing(buf, &cmd->resptp, 3, 3, size, op); + sja1105_packing(buf, &cmd->corrclk4ts, 2, 2, size, op); + sja1105_packing(buf, &cmd->ptpclkadd, 0, 0, size, op); +} + +int sja1105_ptp_commit(struct dsa_switch *ds, struct sja1105_ptp_cmd *cmd, + sja1105_spi_rw_mode_t rw) +{ + const struct sja1105_private *priv = ds->priv; + const struct sja1105_regs *regs = priv->info->regs; + u8 buf[SJA1105_SIZE_PTP_CMD] = {0}; + int rc; + + if (rw == SPI_WRITE) + priv->info->ptp_cmd_packing(buf, cmd, PACK); + + rc = sja1105_xfer_buf(priv, rw, regs->ptp_control, buf, + SJA1105_SIZE_PTP_CMD); + + if (rw == SPI_READ) + priv->info->ptp_cmd_packing(buf, cmd, UNPACK); + + return rc; +} + +/* The switch returns partial timestamps (24 bits for SJA1105 E/T, which wrap + * around in 0.135 seconds, and 32 bits for P/Q/R/S, wrapping around in 34.35 + * seconds). + * + * This receives the RX or TX MAC timestamps, provided by hardware as + * the lower bits of the cycle counter, sampled at the time the timestamp was + * collected. + * + * To reconstruct into a full 64-bit-wide timestamp, the cycle counter is + * read and the high-order bits are filled in. + * + * Must be called within one wraparound period of the partial timestamp since + * it was generated by the MAC. + */ +static u64 sja1105_tstamp_reconstruct(struct dsa_switch *ds, u64 now, + u64 ts_partial) +{ + struct sja1105_private *priv = ds->priv; + u64 partial_tstamp_mask = CYCLECOUNTER_MASK(priv->info->ptp_ts_bits); + u64 ts_reconstructed; + + ts_reconstructed = (now & ~partial_tstamp_mask) | ts_partial; + + /* Check lower bits of current cycle counter against the timestamp. + * If the current cycle counter is lower than the partial timestamp, + * then wraparound surely occurred and must be accounted for. + */ + if ((now & partial_tstamp_mask) <= ts_partial) + ts_reconstructed -= (partial_tstamp_mask + 1); + + return ts_reconstructed; +} + +/* Reads the SPI interface for an egress timestamp generated by the switch + * for frames sent using management routes. + * + * SJA1105 E/T layout of the 4-byte SPI payload: + * + * 31 23 15 7 0 + * | | | | | + * +-----+-----+-----+ ^ + * ^ | + * | | + * 24-bit timestamp Update bit + * + * + * SJA1105 P/Q/R/S layout of the 8-byte SPI payload: + * + * 31 23 15 7 0 63 55 47 39 32 + * | | | | | | | | | | + * ^ +-----+-----+-----+-----+ + * | ^ + * | | + * Update bit 32-bit timestamp + * + * Notice that the update bit is in the same place. + * To have common code for E/T and P/Q/R/S for reading the timestamp, + * we need to juggle with the offset and the bit indices. + */ +static int sja1105_ptpegr_ts_poll(struct dsa_switch *ds, int port, u64 *ts) +{ + struct sja1105_private *priv = ds->priv; + const struct sja1105_regs *regs = priv->info->regs; + int tstamp_bit_start, tstamp_bit_end; + int timeout = 10; + u8 packed_buf[8]; + u64 update; + int rc; + + do { + rc = sja1105_xfer_buf(priv, SPI_READ, regs->ptpegr_ts[port], + packed_buf, priv->info->ptpegr_ts_bytes); + if (rc < 0) + return rc; + + sja1105_unpack(packed_buf, &update, 0, 0, + priv->info->ptpegr_ts_bytes); + if (update) + break; + + usleep_range(10, 50); + } while (--timeout); + + if (!timeout) + return -ETIMEDOUT; + + /* Point the end bit to the second 32-bit word on P/Q/R/S, + * no-op on E/T. + */ + tstamp_bit_end = (priv->info->ptpegr_ts_bytes - 4) * 8; + /* Shift the 24-bit timestamp on E/T to be collected from 31:8. + * No-op on P/Q/R/S. + */ + tstamp_bit_end += 32 - priv->info->ptp_ts_bits; + tstamp_bit_start = tstamp_bit_end + priv->info->ptp_ts_bits - 1; + + *ts = 0; + + sja1105_unpack(packed_buf, ts, tstamp_bit_start, tstamp_bit_end, + priv->info->ptpegr_ts_bytes); + + return 0; +} + +/* Caller must hold ptp_data->lock */ +static int sja1105_ptpclkval_read(struct sja1105_private *priv, u64 *ticks, + struct ptp_system_timestamp *ptp_sts) +{ + const struct sja1105_regs *regs = priv->info->regs; + + return sja1105_xfer_u64(priv, SPI_READ, regs->ptpclkval, ticks, + ptp_sts); +} + +/* Caller must hold ptp_data->lock */ +static int sja1105_ptpclkval_write(struct sja1105_private *priv, u64 ticks, + struct ptp_system_timestamp *ptp_sts) +{ + const struct sja1105_regs *regs = priv->info->regs; + + return sja1105_xfer_u64(priv, SPI_WRITE, regs->ptpclkval, &ticks, + ptp_sts); +} + +static void sja1105_extts_poll(struct sja1105_private *priv) +{ + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + const struct sja1105_regs *regs = priv->info->regs; + struct ptp_clock_event event; + u64 ptpsyncts = 0; + int rc; + + rc = sja1105_xfer_u64(priv, SPI_READ, regs->ptpsyncts, &ptpsyncts, + NULL); + if (rc < 0) + dev_err_ratelimited(priv->ds->dev, + "Failed to read PTPSYNCTS: %d\n", rc); + + if (ptpsyncts && ptp_data->ptpsyncts != ptpsyncts) { + event.index = 0; + event.type = PTP_CLOCK_EXTTS; + event.timestamp = ns_to_ktime(sja1105_ticks_to_ns(ptpsyncts)); + ptp_clock_event(ptp_data->clock, &event); + + ptp_data->ptpsyncts = ptpsyncts; + } +} + +static long sja1105_rxtstamp_work(struct ptp_clock_info *ptp) +{ + struct sja1105_ptp_data *ptp_data = ptp_caps_to_data(ptp); + struct sja1105_private *priv = ptp_data_to_sja1105(ptp_data); + struct dsa_switch *ds = priv->ds; + struct sk_buff *skb; + + mutex_lock(&ptp_data->lock); + + while ((skb = skb_dequeue(&ptp_data->skb_rxtstamp_queue)) != NULL) { + struct skb_shared_hwtstamps *shwt = skb_hwtstamps(skb); + u64 ticks, ts; + int rc; + + rc = sja1105_ptpclkval_read(priv, &ticks, NULL); + if (rc < 0) { + dev_err(ds->dev, "Failed to read PTP clock: %d\n", rc); + kfree_skb(skb); + continue; + } + + *shwt = (struct skb_shared_hwtstamps) {0}; + + ts = SJA1105_SKB_CB(skb)->tstamp; + ts = sja1105_tstamp_reconstruct(ds, ticks, ts); + + shwt->hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(ts)); + netif_rx(skb); + } + + if (ptp_data->extts_enabled) + sja1105_extts_poll(priv); + + mutex_unlock(&ptp_data->lock); + + /* Don't restart */ + return -1; +} + +bool sja1105_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + + if (!(priv->hwts_rx_en & BIT(port))) + return false; + + /* We need to read the full PTP clock to reconstruct the Rx + * timestamp. For that we need a sleepable context. + */ + skb_queue_tail(&ptp_data->skb_rxtstamp_queue, skb); + ptp_schedule_worker(ptp_data->clock, 0); + return true; +} + +bool sja1110_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) +{ + struct skb_shared_hwtstamps *shwt = skb_hwtstamps(skb); + u64 ts = SJA1105_SKB_CB(skb)->tstamp; + + *shwt = (struct skb_shared_hwtstamps) {0}; + + shwt->hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(ts)); + + /* Don't defer */ + return false; +} + +/* Called from dsa_skb_defer_rx_timestamp */ +bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, + struct sk_buff *skb, unsigned int type) +{ + struct sja1105_private *priv = ds->priv; + + return priv->info->rxtstamp(ds, port, skb); +} + +void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, u8 ts_id, + enum sja1110_meta_tstamp dir, u64 tstamp) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + struct sk_buff *skb, *skb_tmp, *skb_match = NULL; + struct skb_shared_hwtstamps shwt = {0}; + + /* We don't care about RX timestamps on the CPU port */ + if (dir == SJA1110_META_TSTAMP_RX) + return; + + spin_lock(&ptp_data->skb_txtstamp_queue.lock); + + skb_queue_walk_safe(&ptp_data->skb_txtstamp_queue, skb, skb_tmp) { + if (SJA1105_SKB_CB(skb)->ts_id != ts_id) + continue; + + __skb_unlink(skb, &ptp_data->skb_txtstamp_queue); + skb_match = skb; + + break; + } + + spin_unlock(&ptp_data->skb_txtstamp_queue.lock); + + if (WARN_ON(!skb_match)) + return; + + shwt.hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(tstamp)); + skb_complete_tx_timestamp(skb_match, &shwt); +} + +/* In addition to cloning the skb which is done by the common + * sja1105_port_txtstamp, we need to generate a timestamp ID and save the + * packet to the TX timestamping queue. + */ +void sja1110_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) +{ + struct sk_buff *clone = SJA1105_SKB_CB(skb)->clone; + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + u8 ts_id; + + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + + spin_lock(&priv->ts_id_lock); + + ts_id = priv->ts_id; + /* Deal automatically with 8-bit wraparound */ + priv->ts_id++; + + SJA1105_SKB_CB(clone)->ts_id = ts_id; + + spin_unlock(&priv->ts_id_lock); + + skb_queue_tail(&ptp_data->skb_txtstamp_queue, clone); +} + +/* Called from dsa_skb_tx_timestamp. This callback is just to clone + * the skb and have it available in SJA1105_SKB_CB in the .port_deferred_xmit + * callback, where we will timestamp it synchronously. + */ +void sja1105_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) +{ + struct sja1105_private *priv = ds->priv; + struct sk_buff *clone; + + if (!(priv->hwts_tx_en & BIT(port))) + return; + + clone = skb_clone_sk(skb); + if (!clone) + return; + + SJA1105_SKB_CB(skb)->clone = clone; + + if (priv->info->txtstamp) + priv->info->txtstamp(ds, port, skb); +} + +static int sja1105_ptp_reset(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + struct sja1105_ptp_cmd cmd = ptp_data->cmd; + int rc; + + mutex_lock(&ptp_data->lock); + + cmd.resptp = 1; + + dev_dbg(ds->dev, "Resetting PTP clock\n"); + rc = sja1105_ptp_commit(ds, &cmd, SPI_WRITE); + + sja1105_tas_clockstep(priv->ds); + + mutex_unlock(&ptp_data->lock); + + return rc; +} + +/* Caller must hold ptp_data->lock */ +int __sja1105_ptp_gettimex(struct dsa_switch *ds, u64 *ns, + struct ptp_system_timestamp *ptp_sts) +{ + struct sja1105_private *priv = ds->priv; + u64 ticks; + int rc; + + rc = sja1105_ptpclkval_read(priv, &ticks, ptp_sts); + if (rc < 0) { + dev_err(ds->dev, "Failed to read PTP clock: %d\n", rc); + return rc; + } + + *ns = sja1105_ticks_to_ns(ticks); + + return 0; +} + +static int sja1105_ptp_gettimex(struct ptp_clock_info *ptp, + struct timespec64 *ts, + struct ptp_system_timestamp *ptp_sts) +{ + struct sja1105_ptp_data *ptp_data = ptp_caps_to_data(ptp); + struct sja1105_private *priv = ptp_data_to_sja1105(ptp_data); + u64 now = 0; + int rc; + + mutex_lock(&ptp_data->lock); + + rc = __sja1105_ptp_gettimex(priv->ds, &now, ptp_sts); + *ts = ns_to_timespec64(now); + + mutex_unlock(&ptp_data->lock); + + return rc; +} + +/* Caller must hold ptp_data->lock */ +static int sja1105_ptp_mode_set(struct sja1105_private *priv, + enum sja1105_ptp_clk_mode mode) +{ + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + + if (ptp_data->cmd.ptpclkadd == mode) + return 0; + + ptp_data->cmd.ptpclkadd = mode; + + return sja1105_ptp_commit(priv->ds, &ptp_data->cmd, SPI_WRITE); +} + +/* Write to PTPCLKVAL while PTPCLKADD is 0 */ +int __sja1105_ptp_settime(struct dsa_switch *ds, u64 ns, + struct ptp_system_timestamp *ptp_sts) +{ + struct sja1105_private *priv = ds->priv; + u64 ticks = ns_to_sja1105_ticks(ns); + int rc; + + rc = sja1105_ptp_mode_set(priv, PTP_SET_MODE); + if (rc < 0) { + dev_err(priv->ds->dev, "Failed to put PTPCLK in set mode\n"); + return rc; + } + + rc = sja1105_ptpclkval_write(priv, ticks, ptp_sts); + + sja1105_tas_clockstep(priv->ds); + + return rc; +} + +static int sja1105_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct sja1105_ptp_data *ptp_data = ptp_caps_to_data(ptp); + struct sja1105_private *priv = ptp_data_to_sja1105(ptp_data); + u64 ns = timespec64_to_ns(ts); + int rc; + + mutex_lock(&ptp_data->lock); + + rc = __sja1105_ptp_settime(priv->ds, ns, NULL); + + mutex_unlock(&ptp_data->lock); + + return rc; +} + +static int sja1105_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +{ + struct sja1105_ptp_data *ptp_data = ptp_caps_to_data(ptp); + struct sja1105_private *priv = ptp_data_to_sja1105(ptp_data); + const struct sja1105_regs *regs = priv->info->regs; + u32 clkrate32; + s64 clkrate; + int rc; + + clkrate = (s64)scaled_ppm * SJA1105_CC_MULT_NUM; + clkrate = div_s64(clkrate, SJA1105_CC_MULT_DEM); + + /* Take a +/- value and re-center it around 2^31. */ + clkrate = SJA1105_CC_MULT + clkrate; + WARN_ON(abs(clkrate) >= GENMASK_ULL(31, 0)); + clkrate32 = clkrate; + + mutex_lock(&ptp_data->lock); + + rc = sja1105_xfer_u32(priv, SPI_WRITE, regs->ptpclkrate, &clkrate32, + NULL); + + sja1105_tas_adjfreq(priv->ds); + + mutex_unlock(&ptp_data->lock); + + return rc; +} + +/* Write to PTPCLKVAL while PTPCLKADD is 1 */ +int __sja1105_ptp_adjtime(struct dsa_switch *ds, s64 delta) +{ + struct sja1105_private *priv = ds->priv; + s64 ticks = ns_to_sja1105_ticks(delta); + int rc; + + rc = sja1105_ptp_mode_set(priv, PTP_ADD_MODE); + if (rc < 0) { + dev_err(priv->ds->dev, "Failed to put PTPCLK in add mode\n"); + return rc; + } + + rc = sja1105_ptpclkval_write(priv, ticks, NULL); + + sja1105_tas_clockstep(priv->ds); + + return rc; +} + +static int sja1105_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct sja1105_ptp_data *ptp_data = ptp_caps_to_data(ptp); + struct sja1105_private *priv = ptp_data_to_sja1105(ptp_data); + int rc; + + mutex_lock(&ptp_data->lock); + + rc = __sja1105_ptp_adjtime(priv->ds, delta); + + mutex_unlock(&ptp_data->lock); + + return rc; +} + +static void sja1105_ptp_extts_setup_timer(struct sja1105_ptp_data *ptp_data) +{ + unsigned long expires = ((jiffies / SJA1105_EXTTS_INTERVAL) + 1) * + SJA1105_EXTTS_INTERVAL; + + mod_timer(&ptp_data->extts_timer, expires); +} + +static void sja1105_ptp_extts_timer(struct timer_list *t) +{ + struct sja1105_ptp_data *ptp_data = extts_to_data(t); + + ptp_schedule_worker(ptp_data->clock, 0); + + sja1105_ptp_extts_setup_timer(ptp_data); +} + +static int sja1105_change_ptp_clk_pin_func(struct sja1105_private *priv, + enum ptp_pin_function func) +{ + struct sja1105_avb_params_entry *avb; + enum ptp_pin_function old_func; + + avb = priv->static_config.tables[BLK_IDX_AVB_PARAMS].entries; + + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID || + avb->cas_master) + old_func = PTP_PF_PEROUT; + else + old_func = PTP_PF_EXTTS; + + if (func == old_func) + return 0; + + avb->cas_master = (func == PTP_PF_PEROUT); + + return sja1105_dynamic_config_write(priv, BLK_IDX_AVB_PARAMS, 0, avb, + true); +} + +/* The PTP_CLK pin may be configured to toggle with a 50% duty cycle and a + * frequency f: + * + * NSEC_PER_SEC + * f = ---------------------- + * (PTPPINDUR * 8 ns) * 2 + */ +static int sja1105_per_out_enable(struct sja1105_private *priv, + struct ptp_perout_request *perout, + bool on) +{ + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_ptp_cmd cmd = ptp_data->cmd; + int rc; + + /* We only support one channel */ + if (perout->index != 0) + return -EOPNOTSUPP; + + /* Reject requests with unsupported flags */ + if (perout->flags) + return -EOPNOTSUPP; + + mutex_lock(&ptp_data->lock); + + rc = sja1105_change_ptp_clk_pin_func(priv, PTP_PF_PEROUT); + if (rc) + goto out; + + if (on) { + struct timespec64 pin_duration_ts = { + .tv_sec = perout->period.sec, + .tv_nsec = perout->period.nsec, + }; + struct timespec64 pin_start_ts = { + .tv_sec = perout->start.sec, + .tv_nsec = perout->start.nsec, + }; + u64 pin_duration = timespec64_to_ns(&pin_duration_ts); + u64 pin_start = timespec64_to_ns(&pin_start_ts); + u32 pin_duration32; + u64 now; + + /* ptppindur: 32 bit register which holds the interval between + * 2 edges on PTP_CLK. So check for truncation which happens + * at periods larger than around 68.7 seconds. + */ + pin_duration = ns_to_sja1105_ticks(pin_duration / 2); + if (pin_duration > U32_MAX) { + rc = -ERANGE; + goto out; + } + pin_duration32 = pin_duration; + + /* ptppins: 64 bit register which needs to hold a PTP time + * larger than the current time, otherwise the startptpcp + * command won't do anything. So advance the current time + * by a number of periods in a way that won't alter the + * phase offset. + */ + rc = __sja1105_ptp_gettimex(priv->ds, &now, NULL); + if (rc < 0) + goto out; + + pin_start = future_base_time(pin_start, pin_duration, + now + 1ull * NSEC_PER_SEC); + pin_start = ns_to_sja1105_ticks(pin_start); + + rc = sja1105_xfer_u64(priv, SPI_WRITE, regs->ptppinst, + &pin_start, NULL); + if (rc < 0) + goto out; + + rc = sja1105_xfer_u32(priv, SPI_WRITE, regs->ptppindur, + &pin_duration32, NULL); + if (rc < 0) + goto out; + } + + if (on) + cmd.startptpcp = true; + else + cmd.stopptpcp = true; + + rc = sja1105_ptp_commit(priv->ds, &cmd, SPI_WRITE); + +out: + mutex_unlock(&ptp_data->lock); + + return rc; +} + +static int sja1105_extts_enable(struct sja1105_private *priv, + struct ptp_extts_request *extts, + bool on) +{ + int rc; + + /* We only support one channel */ + if (extts->index != 0) + return -EOPNOTSUPP; + + /* Reject requests with unsupported flags */ + if (extts->flags & ~(PTP_ENABLE_FEATURE | + PTP_RISING_EDGE | + PTP_FALLING_EDGE | + PTP_STRICT_FLAGS)) + return -EOPNOTSUPP; + + /* We can only enable time stamping on both edges, sadly. */ + if ((extts->flags & PTP_STRICT_FLAGS) && + (extts->flags & PTP_ENABLE_FEATURE) && + (extts->flags & PTP_EXTTS_EDGES) != PTP_EXTTS_EDGES) + return -EOPNOTSUPP; + + rc = sja1105_change_ptp_clk_pin_func(priv, PTP_PF_EXTTS); + if (rc) + return rc; + + priv->ptp_data.extts_enabled = on; + + if (on) + sja1105_ptp_extts_setup_timer(&priv->ptp_data); + else + del_timer_sync(&priv->ptp_data.extts_timer); + + return 0; +} + +static int sja1105_ptp_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *req, int on) +{ + struct sja1105_ptp_data *ptp_data = ptp_caps_to_data(ptp); + struct sja1105_private *priv = ptp_data_to_sja1105(ptp_data); + int rc = -EOPNOTSUPP; + + if (req->type == PTP_CLK_REQ_PEROUT) + rc = sja1105_per_out_enable(priv, &req->perout, on); + else if (req->type == PTP_CLK_REQ_EXTTS) + rc = sja1105_extts_enable(priv, &req->extts, on); + + return rc; +} + +static int sja1105_ptp_verify_pin(struct ptp_clock_info *ptp, unsigned int pin, + enum ptp_pin_function func, unsigned int chan) +{ + struct sja1105_ptp_data *ptp_data = ptp_caps_to_data(ptp); + struct sja1105_private *priv = ptp_data_to_sja1105(ptp_data); + + if (chan != 0 || pin != 0) + return -1; + + switch (func) { + case PTP_PF_NONE: + case PTP_PF_PEROUT: + break; + case PTP_PF_EXTTS: + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + return -1; + break; + default: + return -1; + } + return 0; +} + +static struct ptp_pin_desc sja1105_ptp_pin = { + .name = "ptp_clk", + .index = 0, + .func = PTP_PF_NONE, +}; + +int sja1105_ptp_clock_register(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + + ptp_data->caps = (struct ptp_clock_info) { + .owner = THIS_MODULE, + .name = "SJA1105 PHC", + .adjfine = sja1105_ptp_adjfine, + .adjtime = sja1105_ptp_adjtime, + .gettimex64 = sja1105_ptp_gettimex, + .settime64 = sja1105_ptp_settime, + .enable = sja1105_ptp_enable, + .verify = sja1105_ptp_verify_pin, + .do_aux_work = sja1105_rxtstamp_work, + .max_adj = SJA1105_MAX_ADJ_PPB, + .pin_config = &sja1105_ptp_pin, + .n_pins = 1, + .n_ext_ts = 1, + .n_per_out = 1, + }; + + /* Only used on SJA1105 */ + skb_queue_head_init(&ptp_data->skb_rxtstamp_queue); + /* Only used on SJA1110 */ + skb_queue_head_init(&ptp_data->skb_txtstamp_queue); + + ptp_data->clock = ptp_clock_register(&ptp_data->caps, ds->dev); + if (IS_ERR_OR_NULL(ptp_data->clock)) + return PTR_ERR(ptp_data->clock); + + ptp_data->cmd.corrclk4ts = true; + ptp_data->cmd.ptpclkadd = PTP_SET_MODE; + + timer_setup(&ptp_data->extts_timer, sja1105_ptp_extts_timer, 0); + + return sja1105_ptp_reset(ds); +} + +void sja1105_ptp_clock_unregister(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + + if (IS_ERR_OR_NULL(ptp_data->clock)) + return; + + del_timer_sync(&ptp_data->extts_timer); + ptp_cancel_worker_sync(ptp_data->clock); + skb_queue_purge(&ptp_data->skb_txtstamp_queue); + skb_queue_purge(&ptp_data->skb_rxtstamp_queue); + ptp_clock_unregister(ptp_data->clock); + ptp_data->clock = NULL; +} + +void sja1105_ptp_txtstamp_skb(struct dsa_switch *ds, int port, + struct sk_buff *skb) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + struct skb_shared_hwtstamps shwt = {0}; + u64 ticks, ts; + int rc; + + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + + mutex_lock(&ptp_data->lock); + + rc = sja1105_ptpegr_ts_poll(ds, port, &ts); + if (rc < 0) { + dev_err(ds->dev, "timed out polling for tstamp\n"); + kfree_skb(skb); + goto out; + } + + rc = sja1105_ptpclkval_read(priv, &ticks, NULL); + if (rc < 0) { + dev_err(ds->dev, "Failed to read PTP clock: %d\n", rc); + kfree_skb(skb); + goto out; + } + + ts = sja1105_tstamp_reconstruct(ds, ticks, ts); + + shwt.hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(ts)); + skb_complete_tx_timestamp(skb, &shwt); + +out: + mutex_unlock(&ptp_data->lock); +} diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h new file mode 100644 index 0000000000..416461ee95 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_PTP_H +#define _SJA1105_PTP_H + +#include <linux/timer.h> + +#if IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) + +/* Timestamps are in units of 8 ns clock ticks (equivalent to + * a fixed 125 MHz clock). + */ +#define SJA1105_TICK_NS 8 + +static inline s64 ns_to_sja1105_ticks(s64 ns) +{ + return ns / SJA1105_TICK_NS; +} + +static inline s64 sja1105_ticks_to_ns(s64 ticks) +{ + return ticks * SJA1105_TICK_NS; +} + +/* Calculate the first base_time in the future that satisfies this + * relationship: + * + * future_base_time = base_time + N x cycle_time >= now, or + * + * now - base_time + * N >= --------------- + * cycle_time + * + * Because N is an integer, the ceiling value of the above "a / b" ratio + * is in fact precisely the floor value of "(a + b - 1) / b", which is + * easier to calculate only having integer division tools. + */ +static inline s64 future_base_time(s64 base_time, s64 cycle_time, s64 now) +{ + s64 a, b, n; + + if (base_time >= now) + return base_time; + + a = now - base_time; + b = cycle_time; + n = div_s64(a + b - 1, b); + + return base_time + n * cycle_time; +} + +/* This is not a preprocessor macro because the "ns" argument may or may not be + * s64 at caller side. This ensures it is properly type-cast before div_s64. + */ +static inline s64 ns_to_sja1105_delta(s64 ns) +{ + return div_s64(ns, 200); +} + +static inline s64 sja1105_delta_to_ns(s64 delta) +{ + return delta * 200; +} + +struct sja1105_ptp_cmd { + u64 startptpcp; /* start toggling PTP_CLK pin */ + u64 stopptpcp; /* stop toggling PTP_CLK pin */ + u64 ptpstrtsch; /* start schedule */ + u64 ptpstopsch; /* stop schedule */ + u64 resptp; /* reset */ + u64 corrclk4ts; /* use the corrected clock for timestamps */ + u64 ptpclkadd; /* enum sja1105_ptp_clk_mode */ +}; + +struct sja1105_ptp_data { + struct timer_list extts_timer; + /* Used only on SJA1105 to reconstruct partial timestamps */ + struct sk_buff_head skb_rxtstamp_queue; + /* Used on SJA1110 where meta frames are generated only for + * 2-step TX timestamps + */ + struct sk_buff_head skb_txtstamp_queue; + struct ptp_clock_info caps; + struct ptp_clock *clock; + struct sja1105_ptp_cmd cmd; + /* Serializes all operations on the PTP hardware clock */ + struct mutex lock; + bool extts_enabled; + u64 ptpsyncts; +}; + +int sja1105_ptp_clock_register(struct dsa_switch *ds); + +void sja1105_ptp_clock_unregister(struct dsa_switch *ds); + +void sja1105et_ptp_cmd_packing(u8 *buf, struct sja1105_ptp_cmd *cmd, + enum packing_op op); + +void sja1105pqrs_ptp_cmd_packing(u8 *buf, struct sja1105_ptp_cmd *cmd, + enum packing_op op); + +int sja1105_get_ts_info(struct dsa_switch *ds, int port, + struct ethtool_ts_info *ts); + +void sja1105_ptp_txtstamp_skb(struct dsa_switch *ds, int slot, + struct sk_buff *clone); + +bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, + struct sk_buff *skb, unsigned int type); + +void sja1105_port_txtstamp(struct dsa_switch *ds, int port, + struct sk_buff *skb); + +int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr); + +int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr); + +int __sja1105_ptp_gettimex(struct dsa_switch *ds, u64 *ns, + struct ptp_system_timestamp *sts); + +int __sja1105_ptp_settime(struct dsa_switch *ds, u64 ns, + struct ptp_system_timestamp *ptp_sts); + +int __sja1105_ptp_adjtime(struct dsa_switch *ds, s64 delta); + +int sja1105_ptp_commit(struct dsa_switch *ds, struct sja1105_ptp_cmd *cmd, + sja1105_spi_rw_mode_t rw); + +bool sja1105_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); +bool sja1110_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); +void sja1110_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); + +void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, u8 ts_id, + enum sja1110_meta_tstamp dir, u64 tstamp); + +#else + +struct sja1105_ptp_cmd; + +/* Structures cannot be empty in C. Bah! + * Keep the mutex as the only element, which is a bit more difficult to + * refactor out of sja1105_main.c anyway. + */ +struct sja1105_ptp_data { + struct mutex lock; +}; + +static inline int sja1105_ptp_clock_register(struct dsa_switch *ds) +{ + return 0; +} + +static inline void sja1105_ptp_clock_unregister(struct dsa_switch *ds) { } + +static inline void sja1105_ptp_txtstamp_skb(struct dsa_switch *ds, int slot, + struct sk_buff *clone) +{ +} + +static inline int __sja1105_ptp_gettimex(struct dsa_switch *ds, u64 *ns, + struct ptp_system_timestamp *sts) +{ + return 0; +} + +static inline int __sja1105_ptp_settime(struct dsa_switch *ds, u64 ns, + struct ptp_system_timestamp *ptp_sts) +{ + return 0; +} + +static inline int __sja1105_ptp_adjtime(struct dsa_switch *ds, s64 delta) +{ + return 0; +} + +static inline int sja1105_ptp_commit(struct dsa_switch *ds, + struct sja1105_ptp_cmd *cmd, + sja1105_spi_rw_mode_t rw) +{ + return 0; +} + +#define sja1105et_ptp_cmd_packing NULL + +#define sja1105pqrs_ptp_cmd_packing NULL + +#define sja1105_get_ts_info NULL + +#define sja1105_port_rxtstamp NULL + +#define sja1105_port_txtstamp NULL + +#define sja1105_hwtstamp_get NULL + +#define sja1105_hwtstamp_set NULL + +#define sja1105_rxtstamp NULL +#define sja1110_rxtstamp NULL +#define sja1110_txtstamp NULL + +#define sja1110_process_meta_tstamp NULL + +#endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) */ + +#endif /* _SJA1105_PTP_H */ diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c new file mode 100644 index 0000000000..834b5c1b4d --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -0,0 +1,977 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright 2016-2018 NXP + * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include <linux/spi/spi.h> +#include <linux/packing.h> +#include "sja1105.h" + +struct sja1105_chunk { + u8 *buf; + size_t len; + u64 reg_addr; +}; + +static void +sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg) +{ + const int size = SJA1105_SIZE_SPI_MSG_HEADER; + + memset(buf, 0, size); + + sja1105_pack(buf, &msg->access, 31, 31, size); + sja1105_pack(buf, &msg->read_count, 30, 25, size); + sja1105_pack(buf, &msg->address, 24, 4, size); +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr, taking @len bytes from *buf + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr, writing @len bytes into *buf + */ +static int sja1105_xfer(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, u8 *buf, + size_t len, struct ptp_system_timestamp *ptp_sts) +{ + u8 hdr_buf[SJA1105_SIZE_SPI_MSG_HEADER] = {0}; + struct spi_device *spi = priv->spidev; + struct spi_transfer xfers[2] = {0}; + struct spi_transfer *chunk_xfer; + struct spi_transfer *hdr_xfer; + struct sja1105_chunk chunk; + int num_chunks; + int rc, i = 0; + + num_chunks = DIV_ROUND_UP(len, priv->max_xfer_len); + + chunk.reg_addr = reg_addr; + chunk.buf = buf; + chunk.len = min_t(size_t, len, priv->max_xfer_len); + + hdr_xfer = &xfers[0]; + chunk_xfer = &xfers[1]; + + for (i = 0; i < num_chunks; i++) { + struct spi_transfer *ptp_sts_xfer; + struct sja1105_spi_message msg; + + /* Populate the transfer's header buffer */ + msg.address = chunk.reg_addr; + msg.access = rw; + if (rw == SPI_READ) + msg.read_count = chunk.len / 4; + else + /* Ignored */ + msg.read_count = 0; + sja1105_spi_message_pack(hdr_buf, &msg); + hdr_xfer->tx_buf = hdr_buf; + hdr_xfer->len = SJA1105_SIZE_SPI_MSG_HEADER; + + /* Populate the transfer's data buffer */ + if (rw == SPI_READ) + chunk_xfer->rx_buf = chunk.buf; + else + chunk_xfer->tx_buf = chunk.buf; + chunk_xfer->len = chunk.len; + + /* Request timestamping for the transfer. Instead of letting + * callers specify which byte they want to timestamp, we can + * make certain assumptions: + * - A read operation will request a software timestamp when + * what's being read is the PTP time. That is snapshotted by + * the switch hardware at the end of the command portion + * (hdr_xfer). + * - A write operation will request a software timestamp on + * actions that modify the PTP time. Taking clock stepping as + * an example, the switch writes the PTP time at the end of + * the data portion (chunk_xfer). + */ + if (rw == SPI_READ) + ptp_sts_xfer = hdr_xfer; + else + ptp_sts_xfer = chunk_xfer; + ptp_sts_xfer->ptp_sts_word_pre = ptp_sts_xfer->len - 1; + ptp_sts_xfer->ptp_sts_word_post = ptp_sts_xfer->len - 1; + ptp_sts_xfer->ptp_sts = ptp_sts; + + /* Calculate next chunk */ + chunk.buf += chunk.len; + chunk.reg_addr += chunk.len / 4; + chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf), + priv->max_xfer_len); + + rc = spi_sync_transfer(spi, xfers, 2); + if (rc < 0) { + dev_err(&spi->dev, "SPI transfer failed: %d\n", rc); + return rc; + } + } + + return 0; +} + +int sja1105_xfer_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u8 *buf, size_t len) +{ + return sja1105_xfer(priv, rw, reg_addr, buf, len, NULL); +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr + * + * The u64 *value is unpacked, meaning that it's stored in the native + * CPU endianness and directly usable by software running on the core. + */ +int sja1105_xfer_u64(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value, + struct ptp_system_timestamp *ptp_sts) +{ + u8 packed_buf[8]; + int rc; + + if (rw == SPI_WRITE) + sja1105_pack(packed_buf, value, 63, 0, 8); + + rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 8, ptp_sts); + + if (rw == SPI_READ) + sja1105_unpack(packed_buf, value, 63, 0, 8); + + return rc; +} + +/* Same as above, but transfers only a 4 byte word */ +int sja1105_xfer_u32(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value, + struct ptp_system_timestamp *ptp_sts) +{ + u8 packed_buf[4]; + u64 tmp; + int rc; + + if (rw == SPI_WRITE) { + /* The packing API only supports u64 as CPU word size, + * so we need to convert. + */ + tmp = *value; + sja1105_pack(packed_buf, &tmp, 31, 0, 4); + } + + rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 4, ptp_sts); + + if (rw == SPI_READ) { + sja1105_unpack(packed_buf, &tmp, 31, 0, 4); + *value = tmp; + } + + return rc; +} + +static int sja1105et_reset_cmd(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + const struct sja1105_regs *regs = priv->info->regs; + u32 cold_reset = BIT(3); + + /* Cold reset */ + return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL); +} + +static int sja1105pqrs_reset_cmd(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + const struct sja1105_regs *regs = priv->info->regs; + u32 cold_reset = BIT(2); + + /* Cold reset */ + return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL); +} + +static int sja1110_reset_cmd(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + const struct sja1105_regs *regs = priv->info->regs; + u32 switch_reset = BIT(20); + + /* Only reset the switch core. + * A full cold reset would re-enable the BASE_MCSS_CLOCK PLL which + * would turn on the microcontroller, potentially letting it execute + * code which could interfere with our configuration. + */ + return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &switch_reset, NULL); +} + +int sja1105_inhibit_tx(const struct sja1105_private *priv, + unsigned long port_bitmap, bool tx_inhibited) +{ + const struct sja1105_regs *regs = priv->info->regs; + u32 inhibit_cmd; + int rc; + + rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control, + &inhibit_cmd, NULL); + if (rc < 0) + return rc; + + if (tx_inhibited) + inhibit_cmd |= port_bitmap; + else + inhibit_cmd &= ~port_bitmap; + + return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control, + &inhibit_cmd, NULL); +} + +struct sja1105_status { + u64 configs; + u64 crcchkl; + u64 ids; + u64 crcchkg; +}; + +/* This is not reading the entire General Status area, which is also + * divergent between E/T and P/Q/R/S, but only the relevant bits for + * ensuring that the static config upload procedure was successful. + */ +static void sja1105_status_unpack(void *buf, struct sja1105_status *status) +{ + /* So that addition translates to 4 bytes */ + u32 *p = buf; + + /* device_id is missing from the buffer, but we don't + * want to diverge from the manual definition of the + * register addresses, so we'll back off one step with + * the register pointer, and never access p[0]. + */ + p--; + sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4); + sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4); + sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4); + sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4); +} + +static int sja1105_status_get(struct sja1105_private *priv, + struct sja1105_status *status) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[4]; + int rc; + + rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4); + if (rc < 0) + return rc; + + sja1105_status_unpack(packed_buf, status); + + return 0; +} + +/* Not const because unpacking priv->static_config into buffers and preparing + * for upload requires the recalculation of table CRCs and updating the + * structures with these. + */ +int static_config_buf_prepare_for_upload(struct sja1105_private *priv, + void *config_buf, int buf_len) +{ + struct sja1105_static_config *config = &priv->static_config; + struct sja1105_table_header final_header; + sja1105_config_valid_t valid; + char *final_header_ptr; + int crc_len; + + valid = sja1105_static_config_check_valid(config, + priv->info->max_frame_mem); + if (valid != SJA1105_CONFIG_OK) { + dev_err(&priv->spidev->dev, + sja1105_static_config_error_msg[valid]); + return -EINVAL; + } + + /* Write Device ID and config tables to config_buf */ + sja1105_static_config_pack(config_buf, config); + /* Recalculate CRC of the last header (right now 0xDEADBEEF). + * Don't include the CRC field itself. + */ + crc_len = buf_len - 4; + /* Read the whole table header */ + final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER; + sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK); + /* Modify */ + final_header.crc = sja1105_crc32(config_buf, crc_len); + /* Rewrite */ + sja1105_table_header_packing(final_header_ptr, &final_header, PACK); + + return 0; +} + +#define RETRIES 10 + +int sja1105_static_config_upload(struct sja1105_private *priv) +{ + struct sja1105_static_config *config = &priv->static_config; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = &priv->spidev->dev; + struct dsa_switch *ds = priv->ds; + struct sja1105_status status; + int rc, retries = RETRIES; + u8 *config_buf; + int buf_len; + + buf_len = sja1105_static_config_get_length(config); + config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL); + if (!config_buf) + return -ENOMEM; + + rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Invalid config, cannot upload\n"); + rc = -EINVAL; + goto out; + } + /* Prevent PHY jabbering during switch reset by inhibiting + * Tx on all ports and waiting for current packet to drain. + * Otherwise, the PHY will see an unterminated Ethernet packet. + */ + rc = sja1105_inhibit_tx(priv, GENMASK_ULL(ds->num_ports - 1, 0), true); + if (rc < 0) { + dev_err(dev, "Failed to inhibit Tx on ports\n"); + rc = -ENXIO; + goto out; + } + /* Wait for an eventual egress packet to finish transmission + * (reach IFG). It is guaranteed that a second one will not + * follow, and that switch cold reset is thus safe + */ + usleep_range(500, 1000); + do { + /* Put the SJA1105 in programming mode */ + rc = priv->info->reset_cmd(priv->ds); + if (rc < 0) { + dev_err(dev, "Failed to reset switch, retrying...\n"); + continue; + } + /* Wait for the switch to come out of reset */ + usleep_range(1000, 5000); + /* Upload the static config to the device */ + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config, + config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Failed to upload config, retrying...\n"); + continue; + } + /* Check that SJA1105 responded well to the config upload */ + rc = sja1105_status_get(priv, &status); + if (rc < 0) + continue; + + if (status.ids == 1) { + dev_err(dev, "Mismatch between hardware and static config " + "device id. Wrote 0x%llx, wants 0x%llx\n", + config->device_id, priv->info->device_id); + continue; + } + if (status.crcchkl == 1) { + dev_err(dev, "Switch reported invalid local CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.crcchkg == 1) { + dev_err(dev, "Switch reported invalid global CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.configs == 0) { + dev_err(dev, "Switch reported that configuration is " + "invalid, retrying...\n"); + continue; + } + /* Success! */ + break; + } while (--retries); + + if (!retries) { + rc = -EIO; + dev_err(dev, "Failed to upload config to device, giving up\n"); + goto out; + } else if (retries != RETRIES) { + dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries); + } + +out: + kfree(config_buf); + return rc; +} + +static const struct sja1105_regs sja1105et_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .port_control = 0x11, + .vl_status = 0x10000, + .config = 0x020000, + .rgu = 0x100440, + /* UM10944.pdf, Table 86, ACU Register overview */ + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208}, + .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440}, + .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640}, + /* UM10944.pdf, Table 78, CGU Register overview */ + .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F}, + .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030}, + .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, + .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035}, + .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032}, + .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, + .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, + .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8}, + .ptpschtm = 0x12, /* Spans 0x12 to 0x13 */ + .ptppinst = 0x14, + .ptppindur = 0x16, + .ptp_control = 0x17, + .ptpclkval = 0x18, /* Spans 0x18 to 0x19 */ + .ptpclkrate = 0x1A, + .ptpclkcorp = 0x1D, + .mdio_100base_tx = SJA1105_RSV_ADDR, + .mdio_100base_t1 = SJA1105_RSV_ADDR, +}; + +static const struct sja1105_regs sja1105pqrs_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .port_control = 0x12, + .vl_status = 0x10000, + .config = 0x020000, + .rgu = 0x100440, + /* UM10944.pdf, Table 86, ACU Register overview */ + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, + .pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208}, + .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440}, + .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640}, + .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460}, + /* UM11040.pdf, Table 114 */ + .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B}, + .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C}, + .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030}, + .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E}, + .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D}, + .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0}, + .ptpschtm = 0x13, /* Spans 0x13 to 0x14 */ + .ptppinst = 0x15, + .ptppindur = 0x17, + .ptp_control = 0x18, + .ptpclkval = 0x19, + .ptpclkrate = 0x1B, + .ptpclkcorp = 0x1E, + .ptpsyncts = 0x1F, + .mdio_100base_tx = SJA1105_RSV_ADDR, + .mdio_100base_t1 = SJA1105_RSV_ADDR, +}; + +static const struct sja1105_regs sja1110_regs = { + .device_id = SJA1110_SPI_ADDR(0x0), + .prod_id = SJA1110_ACU_ADDR(0xf00), + .status = SJA1110_SPI_ADDR(0x4), + .port_control = SJA1110_SPI_ADDR(0x50), /* actually INHIB_TX */ + .vl_status = 0x10000, + .config = 0x020000, + .rgu = SJA1110_RGU_ADDR(0x100), /* Reset Control Register 0 */ + /* Ports 2 and 3 are capable of xMII, but there isn't anything to + * configure in the CGU/ACU for them. + */ + .pad_mii_tx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .pad_mii_rx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .pad_mii_id = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1110_ACU_ADDR(0x18), SJA1110_ACU_ADDR(0x28), + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .rmii_pll1 = SJA1105_RSV_ADDR, + .cgu_idiv = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208, 0x20a, + 0x20c, 0x20e, 0x210, 0x212, 0x214}, + .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440, 0x450, + 0x460, 0x470, 0x480, 0x490, 0x4a0}, + .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640, 0x650, + 0x660, 0x670, 0x680, 0x690, 0x6a0}, + .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460, 0x1478, + 0x1490, 0x14a8, 0x14c0, 0x14d8, 0x14f0}, + .mii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .mii_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .mii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .mii_ext_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .rgmii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .rmii_ref_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .rmii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .ptpschtm = SJA1110_SPI_ADDR(0x54), + .ptppinst = SJA1110_SPI_ADDR(0x5c), + .ptppindur = SJA1110_SPI_ADDR(0x64), + .ptp_control = SJA1110_SPI_ADDR(0x68), + .ptpclkval = SJA1110_SPI_ADDR(0x6c), + .ptpclkrate = SJA1110_SPI_ADDR(0x74), + .ptpclkcorp = SJA1110_SPI_ADDR(0x80), + .ptpsyncts = SJA1110_SPI_ADDR(0x84), + .mdio_100base_tx = 0x1c2400, + .mdio_100base_t1 = 0x1c1000, + .pcs_base = {SJA1105_RSV_ADDR, 0x1c1400, 0x1c1800, 0x1c1c00, 0x1c2000, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, +}; + +const struct sja1105_info sja1105e_info = { + .device_id = SJA1105E_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105e_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .tag_proto = DSA_TAG_PROTO_SJA1105, + .can_limit_mcast_flood = false, + .ptp_ts_bits = 24, + .ptpegr_ts_bytes = 4, + .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, + .num_ports = SJA1105_NUM_PORTS, + .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT, + .reset_cmd = sja1105et_reset_cmd, + .fdb_add_cmd = sja1105et_fdb_add, + .fdb_del_cmd = sja1105et_fdb_del, + .ptp_cmd_packing = sja1105et_ptp_cmd_packing, + .rxtstamp = sja1105_rxtstamp, + .clocking_setup = sja1105_clocking_setup, + .regs = &sja1105et_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105E", +}; + +const struct sja1105_info sja1105t_info = { + .device_id = SJA1105T_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105t_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .tag_proto = DSA_TAG_PROTO_SJA1105, + .can_limit_mcast_flood = false, + .ptp_ts_bits = 24, + .ptpegr_ts_bytes = 4, + .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, + .num_ports = SJA1105_NUM_PORTS, + .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT, + .reset_cmd = sja1105et_reset_cmd, + .fdb_add_cmd = sja1105et_fdb_add, + .fdb_del_cmd = sja1105et_fdb_del, + .ptp_cmd_packing = sja1105et_ptp_cmd_packing, + .rxtstamp = sja1105_rxtstamp, + .clocking_setup = sja1105_clocking_setup, + .regs = &sja1105et_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105T", +}; + +const struct sja1105_info sja1105p_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105P_PART_NO, + .static_ops = sja1105p_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .tag_proto = DSA_TAG_PROTO_SJA1105, + .can_limit_mcast_flood = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, + .num_ports = SJA1105_NUM_PORTS, + .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1105_rxtstamp, + .clocking_setup = sja1105_clocking_setup, + .regs = &sja1105pqrs_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105P", +}; + +const struct sja1105_info sja1105q_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105Q_PART_NO, + .static_ops = sja1105q_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .tag_proto = DSA_TAG_PROTO_SJA1105, + .can_limit_mcast_flood = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, + .num_ports = SJA1105_NUM_PORTS, + .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1105_rxtstamp, + .clocking_setup = sja1105_clocking_setup, + .regs = &sja1105pqrs_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105Q", +}; + +const struct sja1105_info sja1105r_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105R_PART_NO, + .static_ops = sja1105r_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .tag_proto = DSA_TAG_PROTO_SJA1105, + .can_limit_mcast_flood = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, + .num_ports = SJA1105_NUM_PORTS, + .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1105_rxtstamp, + .clocking_setup = sja1105_clocking_setup, + .pcs_mdio_read_c45 = sja1105_pcs_mdio_read_c45, + .pcs_mdio_write_c45 = sja1105_pcs_mdio_write_c45, + .regs = &sja1105pqrs_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .supports_sgmii = {false, false, false, false, true}, + .name = "SJA1105R", +}; + +const struct sja1105_info sja1105s_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105S_PART_NO, + .static_ops = sja1105s_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .regs = &sja1105pqrs_regs, + .tag_proto = DSA_TAG_PROTO_SJA1105, + .can_limit_mcast_flood = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, + .num_ports = SJA1105_NUM_PORTS, + .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1105_rxtstamp, + .clocking_setup = sja1105_clocking_setup, + .pcs_mdio_read_c45 = sja1105_pcs_mdio_read_c45, + .pcs_mdio_write_c45 = sja1105_pcs_mdio_write_c45, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .supports_sgmii = {false, false, false, false, true}, + .name = "SJA1105S", +}; + +const struct sja1105_info sja1110a_info = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110A_PART_NO, + .static_ops = sja1110_table_ops, + .dyn_ops = sja1110_dyn_ops, + .regs = &sja1110_regs, + .tag_proto = DSA_TAG_PROTO_SJA1110, + .can_limit_mcast_flood = true, + .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, + .num_ports = SJA1110_NUM_PORTS, + .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1110_rxtstamp, + .txtstamp = sja1110_txtstamp, + .disable_microcontroller = sja1110_disable_microcontroller, + .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45, + .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + [SJA1105_SPEED_2500MBPS] = 1, + }, + .supports_mii = {true, true, true, true, false, + true, true, true, true, true, true}, + .supports_rmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, true, true, true, true, + false, false, false, false, false, false}, + .supports_2500basex = {false, false, false, true, true, + false, false, false, false, false, false}, + .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX, + SJA1105_NO_PHY, SJA1105_NO_PHY, + SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, + SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, + SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, + SJA1105_PHY_BASE_T1}, + .name = "SJA1110A", +}; + +const struct sja1105_info sja1110b_info = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110B_PART_NO, + .static_ops = sja1110_table_ops, + .dyn_ops = sja1110_dyn_ops, + .regs = &sja1110_regs, + .tag_proto = DSA_TAG_PROTO_SJA1110, + .can_limit_mcast_flood = true, + .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, + .num_ports = SJA1110_NUM_PORTS, + .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1110_rxtstamp, + .txtstamp = sja1110_txtstamp, + .disable_microcontroller = sja1110_disable_microcontroller, + .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45, + .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + [SJA1105_SPEED_2500MBPS] = 1, + }, + .supports_mii = {true, true, true, true, false, + true, true, true, true, true, false}, + .supports_rmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, false, false, true, true, + false, false, false, false, false, false}, + .supports_2500basex = {false, false, false, true, true, + false, false, false, false, false, false}, + .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX, + SJA1105_NO_PHY, SJA1105_NO_PHY, + SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, + SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, + SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, + SJA1105_NO_PHY}, + .name = "SJA1110B", +}; + +const struct sja1105_info sja1110c_info = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110C_PART_NO, + .static_ops = sja1110_table_ops, + .dyn_ops = sja1110_dyn_ops, + .regs = &sja1110_regs, + .tag_proto = DSA_TAG_PROTO_SJA1110, + .can_limit_mcast_flood = true, + .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, + .num_ports = SJA1110_NUM_PORTS, + .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1110_rxtstamp, + .txtstamp = sja1110_txtstamp, + .disable_microcontroller = sja1110_disable_microcontroller, + .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45, + .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + [SJA1105_SPEED_2500MBPS] = 1, + }, + .supports_mii = {true, true, true, true, false, + true, true, true, false, false, false}, + .supports_rmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, false, false, false, true, + false, false, false, false, false, false}, + .supports_2500basex = {false, false, false, false, true, + false, false, false, false, false, false}, + .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX, + SJA1105_NO_PHY, SJA1105_NO_PHY, + SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, + SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, + SJA1105_NO_PHY, SJA1105_NO_PHY, + SJA1105_NO_PHY}, + .name = "SJA1110C", +}; + +const struct sja1105_info sja1110d_info = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110D_PART_NO, + .static_ops = sja1110_table_ops, + .dyn_ops = sja1110_dyn_ops, + .regs = &sja1110_regs, + .tag_proto = DSA_TAG_PROTO_SJA1110, + .can_limit_mcast_flood = true, + .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, + .num_ports = SJA1110_NUM_PORTS, + .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, + .rxtstamp = sja1110_rxtstamp, + .txtstamp = sja1110_txtstamp, + .disable_microcontroller = sja1110_disable_microcontroller, + .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45, + .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + [SJA1105_SPEED_2500MBPS] = 1, + }, + .supports_mii = {true, false, true, false, false, + true, true, true, false, false, false}, + .supports_rmii = {false, false, true, false, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, false, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, true, true, true, true, + false, false, false, false, false, false}, + .supports_2500basex = {false, false, false, true, true, + false, false, false, false, false, false}, + .internal_phy = {SJA1105_NO_PHY, SJA1105_NO_PHY, + SJA1105_NO_PHY, SJA1105_NO_PHY, + SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, + SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, + SJA1105_NO_PHY, SJA1105_NO_PHY, + SJA1105_NO_PHY}, + .name = "SJA1110D", +}; diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c new file mode 100644 index 0000000000..baba204ad6 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -0,0 +1,1952 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright 2016-2018 NXP + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105_static_config.h" +#include <linux/crc32.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/errno.h> + +/* Convenience wrappers over the generic packing functions. These take into + * account the SJA1105 memory layout quirks and provide some level of + * programmer protection against incorrect API use. The errors are not expected + * to occur durring runtime, therefore printing and swallowing them here is + * appropriate instead of clutterring up higher-level code. + */ +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len) +{ + int rc = packing(buf, (u64 *)val, start, end, len, + PACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len) +{ + int rc = packing((void *)buf, val, start, end, len, + UNPACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + else if (rc == -ERANGE) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + dump_stack(); +} + +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op) +{ + int rc = packing(buf, val, start, end, len, op, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +/* Little-endian Ethernet CRC32 of data packed as big-endian u32 words */ +u32 sja1105_crc32(const void *buf, size_t len) +{ + unsigned int i; + u64 word; + u32 crc; + + /* seed */ + crc = ~0; + for (i = 0; i < len; i += 4) { + sja1105_unpack(buf + i, &word, 31, 0, 4); + crc = crc32_le(crc, (u8 *)&word, 4); + } + return ~crc; +} + +static size_t sja1105et_avb_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_AVB_PARAMS_ENTRY; + struct sja1105_avb_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->destmeta, 95, 48, size, op); + sja1105_packing(buf, &entry->srcmeta, 47, 0, size, op); + return size; +} + +size_t sja1105pqrs_avb_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY; + struct sja1105_avb_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->cas_master, 126, 126, size, op); + sja1105_packing(buf, &entry->destmeta, 125, 78, size, op); + sja1105_packing(buf, &entry->srcmeta, 77, 30, size, op); + return size; +} + +static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 319, 319, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 318, 318, size, op); + sja1105_packing(buf, &entry->switchid, 317, 315, size, op); + sja1105_packing(buf, &entry->hostprio, 314, 312, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 311, 264, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 263, 216, size, op); + sja1105_packing(buf, &entry->mac_flt1, 215, 168, size, op); + sja1105_packing(buf, &entry->mac_flt0, 167, 120, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 119, 119, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 118, 118, size, op); + sja1105_packing(buf, &entry->send_meta1, 117, 117, size, op); + sja1105_packing(buf, &entry->send_meta0, 116, 116, size, op); + sja1105_packing(buf, &entry->casc_port, 115, 113, size, op); + sja1105_packing(buf, &entry->host_port, 112, 110, size, op); + sja1105_packing(buf, &entry->mirr_port, 109, 107, size, op); + sja1105_packing(buf, &entry->vlmarker, 106, 75, size, op); + sja1105_packing(buf, &entry->vlmask, 74, 43, size, op); + sja1105_packing(buf, &entry->tpid, 42, 27, size, op); + sja1105_packing(buf, &entry->ignore2stf, 26, 26, size, op); + sja1105_packing(buf, &entry->tpid2, 25, 10, size, op); + return size; +} + +/* TPID and TPID2 are intentionally reversed so that semantic + * compatibility with E/T is kept. + */ +size_t sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 351, 351, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 350, 350, size, op); + sja1105_packing(buf, &entry->switchid, 349, 347, size, op); + sja1105_packing(buf, &entry->hostprio, 346, 344, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 343, 296, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 295, 248, size, op); + sja1105_packing(buf, &entry->mac_flt1, 247, 200, size, op); + sja1105_packing(buf, &entry->mac_flt0, 199, 152, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 151, 151, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 150, 150, size, op); + sja1105_packing(buf, &entry->send_meta1, 149, 149, size, op); + sja1105_packing(buf, &entry->send_meta0, 148, 148, size, op); + sja1105_packing(buf, &entry->casc_port, 147, 145, size, op); + sja1105_packing(buf, &entry->host_port, 144, 142, size, op); + sja1105_packing(buf, &entry->mirr_port, 141, 139, size, op); + sja1105_packing(buf, &entry->vlmarker, 138, 107, size, op); + sja1105_packing(buf, &entry->vlmask, 106, 75, size, op); + sja1105_packing(buf, &entry->tpid2, 74, 59, size, op); + sja1105_packing(buf, &entry->ignore2stf, 58, 58, size, op); + sja1105_packing(buf, &entry->tpid, 57, 42, size, op); + sja1105_packing(buf, &entry->queue_ts, 41, 41, size, op); + sja1105_packing(buf, &entry->egrmirrvid, 40, 29, size, op); + sja1105_packing(buf, &entry->egrmirrpcp, 28, 26, size, op); + sja1105_packing(buf, &entry->egrmirrdei, 25, 25, size, op); + sja1105_packing(buf, &entry->replay_port, 24, 22, size, op); + return size; +} + +size_t sja1110_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_general_params_entry *entry = entry_ptr; + const size_t size = SJA1110_SIZE_GENERAL_PARAMS_ENTRY; + + sja1105_packing(buf, &entry->vllupformat, 447, 447, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 446, 446, size, op); + sja1105_packing(buf, &entry->switchid, 445, 442, size, op); + sja1105_packing(buf, &entry->hostprio, 441, 439, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 438, 391, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 390, 343, size, op); + sja1105_packing(buf, &entry->mac_flt1, 342, 295, size, op); + sja1105_packing(buf, &entry->mac_flt0, 294, 247, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 246, 246, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 245, 245, size, op); + sja1105_packing(buf, &entry->send_meta1, 244, 244, size, op); + sja1105_packing(buf, &entry->send_meta0, 243, 243, size, op); + sja1105_packing(buf, &entry->casc_port, 242, 232, size, op); + sja1105_packing(buf, &entry->host_port, 231, 228, size, op); + sja1105_packing(buf, &entry->mirr_port, 227, 224, size, op); + sja1105_packing(buf, &entry->vlmarker, 223, 192, size, op); + sja1105_packing(buf, &entry->vlmask, 191, 160, size, op); + sja1105_packing(buf, &entry->tpid2, 159, 144, size, op); + sja1105_packing(buf, &entry->ignore2stf, 143, 143, size, op); + sja1105_packing(buf, &entry->tpid, 142, 127, size, op); + sja1105_packing(buf, &entry->queue_ts, 126, 126, size, op); + sja1105_packing(buf, &entry->egrmirrvid, 125, 114, size, op); + sja1105_packing(buf, &entry->egrmirrpcp, 113, 111, size, op); + sja1105_packing(buf, &entry->egrmirrdei, 110, 110, size, op); + sja1105_packing(buf, &entry->replay_port, 109, 106, size, op); + sja1105_packing(buf, &entry->tdmaconfigidx, 70, 67, size, op); + sja1105_packing(buf, &entry->header_type, 64, 49, size, op); + sja1105_packing(buf, &entry->tte_en, 16, 16, size, op); + return size; +} + +static size_t +sja1105_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY; + struct sja1105_l2_forwarding_params_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->max_dynp, 95, 93, size, op); + for (i = 0, offset = 13; i < 8; i++, offset += 10) + sja1105_packing(buf, &entry->part_spc[i], + offset + 9, offset + 0, size, op); + return size; +} + +size_t sja1110_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_forwarding_params_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY; + int offset, i; + + sja1105_packing(buf, &entry->max_dynp, 95, 93, size, op); + for (i = 0, offset = 5; i < 8; i++, offset += 11) + sja1105_packing(buf, &entry->part_spc[i], + offset + 10, offset + 0, size, op); + return size; +} + +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY; + struct sja1105_l2_forwarding_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->bc_domain, 63, 59, size, op); + sja1105_packing(buf, &entry->reach_port, 58, 54, size, op); + sja1105_packing(buf, &entry->fl_domain, 53, 49, size, op); + for (i = 0, offset = 25; i < 8; i++, offset += 3) + sja1105_packing(buf, &entry->vlan_pmap[i], + offset + 2, offset + 0, size, op); + return size; +} + +size_t sja1110_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_forwarding_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY; + int offset, i; + + if (entry->type_egrpcp2outputq) { + for (i = 0, offset = 31; i < SJA1110_NUM_PORTS; + i++, offset += 3) { + sja1105_packing(buf, &entry->vlan_pmap[i], + offset + 2, offset + 0, size, op); + } + } else { + sja1105_packing(buf, &entry->bc_domain, 63, 53, size, op); + sja1105_packing(buf, &entry->reach_port, 52, 42, size, op); + sja1105_packing(buf, &entry->fl_domain, 41, 31, size, op); + } + return size; +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->maxage, 31, 17, size, op); + sja1105_packing(buf, &entry->dyn_tbsz, 16, 14, size, op); + sja1105_packing(buf, &entry->poly, 13, 6, size, op); + sja1105_packing(buf, &entry->shared_learn, 5, 5, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 4, 4, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 3, 3, size, op); + return size; +} + +size_t sja1105pqrs_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 58; i < 5; i++, offset += 11) + sja1105_packing(buf, &entry->maxaddrp[i], + offset + 10, offset + 0, size, op); + sja1105_packing(buf, &entry->maxage, 57, 43, size, op); + sja1105_packing(buf, &entry->start_dynspc, 42, 33, size, op); + sja1105_packing(buf, &entry->drpnolearn, 32, 28, size, op); + sja1105_packing(buf, &entry->shared_learn, 27, 27, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 26, 26, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 25, 25, size, op); + sja1105_packing(buf, &entry->use_static, 24, 24, size, op); + sja1105_packing(buf, &entry->owr_dyn, 23, 23, size, op); + sja1105_packing(buf, &entry->learn_once, 22, 22, size, op); + return size; +} + +size_t sja1110_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + const size_t size = SJA1110_SIZE_L2_LOOKUP_PARAMS_ENTRY; + int offset, i; + + for (i = 0, offset = 70; i < SJA1110_NUM_PORTS; i++, offset += 11) + sja1105_packing(buf, &entry->maxaddrp[i], + offset + 10, offset + 0, size, op); + sja1105_packing(buf, &entry->maxage, 69, 55, size, op); + sja1105_packing(buf, &entry->start_dynspc, 54, 45, size, op); + sja1105_packing(buf, &entry->drpnolearn, 44, 34, size, op); + sja1105_packing(buf, &entry->shared_learn, 33, 33, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 32, 32, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 31, 31, size, op); + sja1105_packing(buf, &entry->use_static, 30, 30, size, op); + sja1105_packing(buf, &entry->owr_dyn, 29, 29, size, op); + sja1105_packing(buf, &entry->learn_once, 28, 28, size, op); + return size; +} + +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vlanid, 95, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + sja1105_packing(buf, &entry->index, 29, 20, size, op); + return size; +} + +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + if (entry->lockeds) { + sja1105_packing(buf, &entry->tsreg, 159, 159, size, op); + sja1105_packing(buf, &entry->mirrvlan, 158, 147, size, op); + sja1105_packing(buf, &entry->takets, 146, 146, size, op); + sja1105_packing(buf, &entry->mirr, 145, 145, size, op); + sja1105_packing(buf, &entry->retag, 144, 144, size, op); + } else { + sja1105_packing(buf, &entry->touched, 159, 159, size, op); + sja1105_packing(buf, &entry->age, 158, 144, size, op); + } + sja1105_packing(buf, &entry->mask_iotag, 143, 143, size, op); + sja1105_packing(buf, &entry->mask_vlanid, 142, 131, size, op); + sja1105_packing(buf, &entry->mask_macaddr, 130, 83, size, op); + sja1105_packing(buf, &entry->iotag, 82, 82, size, op); + sja1105_packing(buf, &entry->vlanid, 81, 70, size, op); + sja1105_packing(buf, &entry->macaddr, 69, 22, size, op); + sja1105_packing(buf, &entry->destports, 21, 17, size, op); + sja1105_packing(buf, &entry->enfport, 16, 16, size, op); + sja1105_packing(buf, &entry->index, 15, 6, size, op); + return size; +} + +size_t sja1110_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1110_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + if (entry->lockeds) { + sja1105_packing(buf, &entry->trap, 168, 168, size, op); + sja1105_packing(buf, &entry->mirrvlan, 167, 156, size, op); + sja1105_packing(buf, &entry->takets, 155, 155, size, op); + sja1105_packing(buf, &entry->mirr, 154, 154, size, op); + sja1105_packing(buf, &entry->retag, 153, 153, size, op); + } else { + sja1105_packing(buf, &entry->touched, 168, 168, size, op); + sja1105_packing(buf, &entry->age, 167, 153, size, op); + } + sja1105_packing(buf, &entry->mask_iotag, 152, 152, size, op); + sja1105_packing(buf, &entry->mask_vlanid, 151, 140, size, op); + sja1105_packing(buf, &entry->mask_macaddr, 139, 92, size, op); + sja1105_packing(buf, &entry->mask_srcport, 91, 88, size, op); + sja1105_packing(buf, &entry->iotag, 87, 87, size, op); + sja1105_packing(buf, &entry->vlanid, 86, 75, size, op); + sja1105_packing(buf, &entry->macaddr, 74, 27, size, op); + sja1105_packing(buf, &entry->srcport, 26, 23, size, op); + sja1105_packing(buf, &entry->destports, 22, 12, size, op); + sja1105_packing(buf, &entry->enfport, 11, 11, size, op); + sja1105_packing(buf, &entry->index, 10, 1, size, op); + return size; +} + +static size_t sja1105_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY; + struct sja1105_l2_policing_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->sharindx, 63, 58, size, op); + sja1105_packing(buf, &entry->smax, 57, 42, size, op); + sja1105_packing(buf, &entry->rate, 41, 26, size, op); + sja1105_packing(buf, &entry->maxlen, 25, 15, size, op); + sja1105_packing(buf, &entry->partition, 14, 12, size, op); + return size; +} + +size_t sja1110_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_policing_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY; + + sja1105_packing(buf, &entry->sharindx, 63, 57, size, op); + sja1105_packing(buf, &entry->smax, 56, 39, size, op); + sja1105_packing(buf, &entry->rate, 38, 21, size, op); + sja1105_packing(buf, &entry->maxlen, 20, 10, size, op); + sja1105_packing(buf, &entry->partition, 9, 7, size, op); + return size; +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 72; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 71, 67, size, op); + sja1105_packing(buf, &entry->speed, 66, 65, size, op); + sja1105_packing(buf, &entry->tp_delin, 64, 49, size, op); + sja1105_packing(buf, &entry->tp_delout, 48, 33, size, op); + sja1105_packing(buf, &entry->maxage, 32, 25, size, op); + sja1105_packing(buf, &entry->vlanprio, 24, 22, size, op); + sja1105_packing(buf, &entry->vlanid, 21, 10, size, op); + sja1105_packing(buf, &entry->ing_mirr, 9, 9, size, op); + sja1105_packing(buf, &entry->egr_mirr, 8, 8, size, op); + sja1105_packing(buf, &entry->drpnona664, 7, 7, size, op); + sja1105_packing(buf, &entry->drpdtag, 6, 6, size, op); + sja1105_packing(buf, &entry->drpuntag, 5, 5, size, op); + sja1105_packing(buf, &entry->retag, 4, 4, size, op); + sja1105_packing(buf, &entry->dyn_learn, 3, 3, size, op); + sja1105_packing(buf, &entry->egress, 2, 2, size, op); + sja1105_packing(buf, &entry->ingress, 1, 1, size, op); + return size; +} + +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 104; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 103, 99, size, op); + sja1105_packing(buf, &entry->speed, 98, 97, size, op); + sja1105_packing(buf, &entry->tp_delin, 96, 81, size, op); + sja1105_packing(buf, &entry->tp_delout, 80, 65, size, op); + sja1105_packing(buf, &entry->maxage, 64, 57, size, op); + sja1105_packing(buf, &entry->vlanprio, 56, 54, size, op); + sja1105_packing(buf, &entry->vlanid, 53, 42, size, op); + sja1105_packing(buf, &entry->ing_mirr, 41, 41, size, op); + sja1105_packing(buf, &entry->egr_mirr, 40, 40, size, op); + sja1105_packing(buf, &entry->drpnona664, 39, 39, size, op); + sja1105_packing(buf, &entry->drpdtag, 38, 38, size, op); + sja1105_packing(buf, &entry->drpuntag, 35, 35, size, op); + sja1105_packing(buf, &entry->retag, 34, 34, size, op); + sja1105_packing(buf, &entry->dyn_learn, 33, 33, size, op); + sja1105_packing(buf, &entry->egress, 32, 32, size, op); + sja1105_packing(buf, &entry->ingress, 31, 31, size, op); + return size; +} + +size_t sja1110_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 104; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->speed, 98, 96, size, op); + sja1105_packing(buf, &entry->tp_delin, 95, 80, size, op); + sja1105_packing(buf, &entry->tp_delout, 79, 64, size, op); + sja1105_packing(buf, &entry->maxage, 63, 56, size, op); + sja1105_packing(buf, &entry->vlanprio, 55, 53, size, op); + sja1105_packing(buf, &entry->vlanid, 52, 41, size, op); + sja1105_packing(buf, &entry->ing_mirr, 40, 40, size, op); + sja1105_packing(buf, &entry->egr_mirr, 39, 39, size, op); + sja1105_packing(buf, &entry->drpnona664, 38, 38, size, op); + sja1105_packing(buf, &entry->drpdtag, 37, 37, size, op); + sja1105_packing(buf, &entry->drpuntag, 34, 34, size, op); + sja1105_packing(buf, &entry->retag, 33, 33, size, op); + sja1105_packing(buf, &entry->dyn_learn, 32, 32, size, op); + sja1105_packing(buf, &entry->egress, 31, 31, size, op); + sja1105_packing(buf, &entry->ingress, 30, 30, size, op); + sja1105_packing(buf, &entry->ifg, 10, 5, size, op); + return size; +} + +static size_t +sja1105_schedule_entry_points_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_schedule_entry_points_params_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_PARAMS_ENTRY; + + sja1105_packing(buf, &entry->clksrc, 31, 30, size, op); + sja1105_packing(buf, &entry->actsubsch, 29, 27, size, op); + return size; +} + +static size_t +sja1105_schedule_entry_points_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_schedule_entry_points_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY; + + sja1105_packing(buf, &entry->subschindx, 31, 29, size, op); + sja1105_packing(buf, &entry->delta, 28, 11, size, op); + sja1105_packing(buf, &entry->address, 10, 1, size, op); + return size; +} + +static size_t +sja1110_schedule_entry_points_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_schedule_entry_points_entry *entry = entry_ptr; + const size_t size = SJA1110_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY; + + sja1105_packing(buf, &entry->subschindx, 63, 61, size, op); + sja1105_packing(buf, &entry->delta, 60, 43, size, op); + sja1105_packing(buf, &entry->address, 42, 31, size, op); + return size; +} + +static size_t sja1105_schedule_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_SCHEDULE_PARAMS_ENTRY; + struct sja1105_schedule_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 16; i < 8; i++, offset += 10) + sja1105_packing(buf, &entry->subscheind[i], + offset + 9, offset + 0, size, op); + return size; +} + +static size_t sja1110_schedule_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_schedule_params_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_SCHEDULE_PARAMS_ENTRY; + int offset, i; + + for (i = 0, offset = 0; i < 8; i++, offset += 12) + sja1105_packing(buf, &entry->subscheind[i], + offset + 11, offset + 0, size, op); + return size; +} + +static size_t sja1105_schedule_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_SCHEDULE_ENTRY; + struct sja1105_schedule_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->winstindex, 63, 54, size, op); + sja1105_packing(buf, &entry->winend, 53, 53, size, op); + sja1105_packing(buf, &entry->winst, 52, 52, size, op); + sja1105_packing(buf, &entry->destports, 51, 47, size, op); + sja1105_packing(buf, &entry->setvalid, 46, 46, size, op); + sja1105_packing(buf, &entry->txen, 45, 45, size, op); + sja1105_packing(buf, &entry->resmedia_en, 44, 44, size, op); + sja1105_packing(buf, &entry->resmedia, 43, 36, size, op); + sja1105_packing(buf, &entry->vlindex, 35, 26, size, op); + sja1105_packing(buf, &entry->delta, 25, 8, size, op); + return size; +} + +static size_t sja1110_schedule_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1110_SIZE_SCHEDULE_ENTRY; + struct sja1105_schedule_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->winstindex, 95, 84, size, op); + sja1105_packing(buf, &entry->winend, 83, 83, size, op); + sja1105_packing(buf, &entry->winst, 82, 82, size, op); + sja1105_packing(buf, &entry->destports, 81, 71, size, op); + sja1105_packing(buf, &entry->setvalid, 70, 70, size, op); + sja1105_packing(buf, &entry->txen, 69, 69, size, op); + sja1105_packing(buf, &entry->resmedia_en, 68, 68, size, op); + sja1105_packing(buf, &entry->resmedia, 67, 60, size, op); + sja1105_packing(buf, &entry->vlindex, 59, 48, size, op); + sja1105_packing(buf, &entry->delta, 47, 30, size, op); + return size; +} + +static size_t +sja1105_vl_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_forwarding_params_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_FORWARDING_PARAMS_ENTRY; + int offset, i; + + for (i = 0, offset = 16; i < 8; i++, offset += 10) + sja1105_packing(buf, &entry->partspc[i], + offset + 9, offset + 0, size, op); + sja1105_packing(buf, &entry->debugen, 15, 15, size, op); + return size; +} + +static size_t +sja1110_vl_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_forwarding_params_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_FORWARDING_PARAMS_ENTRY; + int offset, i; + + for (i = 0, offset = 8; i < 8; i++, offset += 11) + sja1105_packing(buf, &entry->partspc[i], + offset + 10, offset + 0, size, op); + sja1105_packing(buf, &entry->debugen, 7, 7, size, op); + return size; +} + +static size_t sja1105_vl_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_forwarding_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_FORWARDING_ENTRY; + + sja1105_packing(buf, &entry->type, 31, 31, size, op); + sja1105_packing(buf, &entry->priority, 30, 28, size, op); + sja1105_packing(buf, &entry->partition, 27, 25, size, op); + sja1105_packing(buf, &entry->destports, 24, 20, size, op); + return size; +} + +static size_t sja1110_vl_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_forwarding_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_FORWARDING_ENTRY; + + sja1105_packing(buf, &entry->type, 31, 31, size, op); + sja1105_packing(buf, &entry->priority, 30, 28, size, op); + sja1105_packing(buf, &entry->partition, 27, 25, size, op); + sja1105_packing(buf, &entry->destports, 24, 14, size, op); + return size; +} + +size_t sja1105_vl_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_lookup_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_LOOKUP_ENTRY; + + if (entry->format == SJA1105_VL_FORMAT_PSFP) { + /* Interpreting vllupformat as 0 */ + sja1105_packing(buf, &entry->destports, + 95, 91, size, op); + sja1105_packing(buf, &entry->iscritical, + 90, 90, size, op); + sja1105_packing(buf, &entry->macaddr, + 89, 42, size, op); + sja1105_packing(buf, &entry->vlanid, + 41, 30, size, op); + sja1105_packing(buf, &entry->port, + 29, 27, size, op); + sja1105_packing(buf, &entry->vlanprior, + 26, 24, size, op); + } else { + /* Interpreting vllupformat as 1 */ + sja1105_packing(buf, &entry->egrmirr, + 95, 91, size, op); + sja1105_packing(buf, &entry->ingrmirr, + 90, 90, size, op); + sja1105_packing(buf, &entry->vlid, + 57, 42, size, op); + sja1105_packing(buf, &entry->port, + 29, 27, size, op); + } + return size; +} + +size_t sja1110_vl_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_lookup_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_LOOKUP_ENTRY; + + if (entry->format == SJA1105_VL_FORMAT_PSFP) { + /* Interpreting vllupformat as 0 */ + sja1105_packing(buf, &entry->destports, + 94, 84, size, op); + sja1105_packing(buf, &entry->iscritical, + 83, 83, size, op); + sja1105_packing(buf, &entry->macaddr, + 82, 35, size, op); + sja1105_packing(buf, &entry->vlanid, + 34, 23, size, op); + sja1105_packing(buf, &entry->port, + 22, 19, size, op); + sja1105_packing(buf, &entry->vlanprior, + 18, 16, size, op); + } else { + /* Interpreting vllupformat as 1 */ + sja1105_packing(buf, &entry->egrmirr, + 94, 84, size, op); + sja1105_packing(buf, &entry->ingrmirr, + 83, 83, size, op); + sja1105_packing(buf, &entry->vlid, + 50, 35, size, op); + sja1105_packing(buf, &entry->port, + 22, 19, size, op); + } + return size; +} + +static size_t sja1105_vl_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_policing_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_POLICING_ENTRY; + + sja1105_packing(buf, &entry->type, 63, 63, size, op); + sja1105_packing(buf, &entry->maxlen, 62, 52, size, op); + sja1105_packing(buf, &entry->sharindx, 51, 42, size, op); + if (entry->type == 0) { + sja1105_packing(buf, &entry->bag, 41, 28, size, op); + sja1105_packing(buf, &entry->jitter, 27, 18, size, op); + } + return size; +} + +size_t sja1110_vl_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vl_policing_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_VL_POLICING_ENTRY; + + sja1105_packing(buf, &entry->type, 63, 63, size, op); + sja1105_packing(buf, &entry->maxlen, 62, 52, size, op); + sja1105_packing(buf, &entry->sharindx, 51, 40, size, op); + if (entry->type == 0) { + sja1105_packing(buf, &entry->bag, 41, 28, size, op); + sja1105_packing(buf, &entry->jitter, 27, 18, size, op); + } + return size; +} + +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY; + struct sja1105_vlan_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->ving_mirr, 63, 59, size, op); + sja1105_packing(buf, &entry->vegr_mirr, 58, 54, size, op); + sja1105_packing(buf, &entry->vmemb_port, 53, 49, size, op); + sja1105_packing(buf, &entry->vlan_bc, 48, 44, size, op); + sja1105_packing(buf, &entry->tag_port, 43, 39, size, op); + sja1105_packing(buf, &entry->vlanid, 38, 27, size, op); + return size; +} + +size_t sja1110_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vlan_lookup_entry *entry = entry_ptr; + const size_t size = SJA1110_SIZE_VLAN_LOOKUP_ENTRY; + + sja1105_packing(buf, &entry->ving_mirr, 95, 85, size, op); + sja1105_packing(buf, &entry->vegr_mirr, 84, 74, size, op); + sja1105_packing(buf, &entry->vmemb_port, 73, 63, size, op); + sja1105_packing(buf, &entry->vlan_bc, 62, 52, size, op); + sja1105_packing(buf, &entry->tag_port, 51, 41, size, op); + sja1105_packing(buf, &entry->type_entry, 40, 39, size, op); + sja1105_packing(buf, &entry->vlanid, 38, 27, size, op); + return size; +} + +static size_t sja1105_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_XMII_PARAMS_ENTRY; + struct sja1105_xmii_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 17; i < 5; i++, offset += 3) { + sja1105_packing(buf, &entry->xmii_mode[i], + offset + 1, offset + 0, size, op); + sja1105_packing(buf, &entry->phy_mac[i], + offset + 2, offset + 2, size, op); + } + return size; +} + +size_t sja1110_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1110_SIZE_XMII_PARAMS_ENTRY; + struct sja1105_xmii_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 20; i < SJA1110_NUM_PORTS; i++, offset += 4) { + sja1105_packing(buf, &entry->xmii_mode[i], + offset + 1, offset + 0, size, op); + sja1105_packing(buf, &entry->phy_mac[i], + offset + 2, offset + 2, size, op); + sja1105_packing(buf, &entry->special[i], + offset + 3, offset + 3, size, op); + } + return size; +} + +size_t sja1105_retagging_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_retagging_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_RETAGGING_ENTRY; + + sja1105_packing(buf, &entry->egr_port, 63, 59, size, op); + sja1105_packing(buf, &entry->ing_port, 58, 54, size, op); + sja1105_packing(buf, &entry->vlan_ing, 53, 42, size, op); + sja1105_packing(buf, &entry->vlan_egr, 41, 30, size, op); + sja1105_packing(buf, &entry->do_not_learn, 29, 29, size, op); + sja1105_packing(buf, &entry->use_dest_ports, 28, 28, size, op); + sja1105_packing(buf, &entry->destports, 27, 23, size, op); + return size; +} + +size_t sja1110_retagging_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_retagging_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_RETAGGING_ENTRY; + + sja1105_packing(buf, &entry->egr_port, 63, 53, size, op); + sja1105_packing(buf, &entry->ing_port, 52, 42, size, op); + sja1105_packing(buf, &entry->vlan_ing, 41, 30, size, op); + sja1105_packing(buf, &entry->vlan_egr, 29, 18, size, op); + sja1105_packing(buf, &entry->do_not_learn, 17, 17, size, op); + sja1105_packing(buf, &entry->use_dest_ports, 16, 16, size, op); + sja1105_packing(buf, &entry->destports, 15, 5, size, op); + return size; +} + +static size_t sja1110_pcp_remapping_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1110_pcp_remapping_entry *entry = entry_ptr; + const size_t size = SJA1110_SIZE_PCP_REMAPPING_ENTRY; + int offset, i; + + for (i = 0, offset = 8; i < SJA1105_NUM_TC; i++, offset += 3) + sja1105_packing(buf, &entry->egrpcp[i], + offset + 2, offset + 0, size, op); + + return size; +} + +size_t sja1105_table_header_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_TABLE_HEADER; + struct sja1105_table_header *entry = entry_ptr; + + sja1105_packing(buf, &entry->block_id, 31, 24, size, op); + sja1105_packing(buf, &entry->len, 55, 32, size, op); + sja1105_packing(buf, &entry->crc, 95, 64, size, op); + return size; +} + +/* WARNING: the *hdr pointer is really non-const, because it is + * modifying the CRC of the header for a 2-stage packing operation + */ +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr) +{ + /* First pack the table as-is, then calculate the CRC, and + * finally put the proper CRC into the packed buffer + */ + memset(buf, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(buf, hdr, PACK); + hdr->crc = sja1105_crc32(buf, SJA1105_SIZE_TABLE_HEADER - 4); + sja1105_pack(buf + SJA1105_SIZE_TABLE_HEADER - 4, &hdr->crc, 31, 0, 4); +} + +static void sja1105_table_write_crc(u8 *table_start, u8 *crc_ptr) +{ + u64 computed_crc; + int len_bytes; + + len_bytes = (uintptr_t)(crc_ptr - table_start); + computed_crc = sja1105_crc32(table_start, len_bytes); + sja1105_pack(crc_ptr, &computed_crc, 31, 0, 4); +} + +/* The block IDs that the switches support are unfortunately sparse, so keep a + * mapping table to "block indices" and translate back and forth so that we + * don't waste useless memory in struct sja1105_static_config. + * Also, since the block id comes from essentially untrusted input (unpacking + * the static config from userspace) it has to be sanitized (range-checked) + * before blindly indexing kernel memory with the blk_idx. + */ +static u64 blk_id_map[BLK_IDX_MAX] = { + [BLK_IDX_SCHEDULE] = BLKID_SCHEDULE, + [BLK_IDX_SCHEDULE_ENTRY_POINTS] = BLKID_SCHEDULE_ENTRY_POINTS, + [BLK_IDX_VL_LOOKUP] = BLKID_VL_LOOKUP, + [BLK_IDX_VL_POLICING] = BLKID_VL_POLICING, + [BLK_IDX_VL_FORWARDING] = BLKID_VL_FORWARDING, + [BLK_IDX_L2_LOOKUP] = BLKID_L2_LOOKUP, + [BLK_IDX_L2_POLICING] = BLKID_L2_POLICING, + [BLK_IDX_VLAN_LOOKUP] = BLKID_VLAN_LOOKUP, + [BLK_IDX_L2_FORWARDING] = BLKID_L2_FORWARDING, + [BLK_IDX_MAC_CONFIG] = BLKID_MAC_CONFIG, + [BLK_IDX_SCHEDULE_PARAMS] = BLKID_SCHEDULE_PARAMS, + [BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS] = BLKID_SCHEDULE_ENTRY_POINTS_PARAMS, + [BLK_IDX_VL_FORWARDING_PARAMS] = BLKID_VL_FORWARDING_PARAMS, + [BLK_IDX_L2_LOOKUP_PARAMS] = BLKID_L2_LOOKUP_PARAMS, + [BLK_IDX_L2_FORWARDING_PARAMS] = BLKID_L2_FORWARDING_PARAMS, + [BLK_IDX_AVB_PARAMS] = BLKID_AVB_PARAMS, + [BLK_IDX_GENERAL_PARAMS] = BLKID_GENERAL_PARAMS, + [BLK_IDX_RETAGGING] = BLKID_RETAGGING, + [BLK_IDX_XMII_PARAMS] = BLKID_XMII_PARAMS, + [BLK_IDX_PCP_REMAPPING] = BLKID_PCP_REMAPPING, +}; + +const char *sja1105_static_config_error_msg[] = { + [SJA1105_CONFIG_OK] = "", + [SJA1105_TTETHERNET_NOT_SUPPORTED] = + "schedule-table present, but TTEthernet is " + "only supported on T and Q/S", + [SJA1105_INCORRECT_TTETHERNET_CONFIGURATION] = + "schedule-table present, but one of " + "schedule-entry-points-table, schedule-parameters-table or " + "schedule-entry-points-parameters table is empty", + [SJA1105_INCORRECT_VIRTUAL_LINK_CONFIGURATION] = + "vl-lookup-table present, but one of vl-policing-table, " + "vl-forwarding-table or vl-forwarding-parameters-table is empty", + [SJA1105_MISSING_L2_POLICING_TABLE] = + "l2-policing-table needs to have at least one entry", + [SJA1105_MISSING_L2_FORWARDING_TABLE] = + "l2-forwarding-table is either missing or incomplete", + [SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE] = + "l2-forwarding-parameters-table is missing", + [SJA1105_MISSING_GENERAL_PARAMS_TABLE] = + "general-parameters-table is missing", + [SJA1105_MISSING_VLAN_TABLE] = + "vlan-lookup-table needs to have at least the default untagged VLAN", + [SJA1105_MISSING_XMII_TABLE] = + "xmii-table is missing", + [SJA1105_MISSING_MAC_TABLE] = + "mac-configuration-table needs to contain an entry for each port", + [SJA1105_OVERCOMMITTED_FRAME_MEMORY] = + "Not allowed to overcommit frame memory. L2 memory partitions " + "and VL memory partitions share the same space. The sum of all " + "16 memory partitions is not allowed to be larger than 929 " + "128-byte blocks (or 910 with retagging). Please adjust " + "l2-forwarding-parameters-table.part_spc and/or " + "vl-forwarding-parameters-table.partspc.", +}; + +static sja1105_config_valid_t +static_config_check_memory_size(const struct sja1105_table *tables, int max_mem) +{ + const struct sja1105_l2_forwarding_params_entry *l2_fwd_params; + const struct sja1105_vl_forwarding_params_entry *vl_fwd_params; + int i, mem = 0; + + l2_fwd_params = tables[BLK_IDX_L2_FORWARDING_PARAMS].entries; + + for (i = 0; i < 8; i++) + mem += l2_fwd_params->part_spc[i]; + + if (tables[BLK_IDX_VL_FORWARDING_PARAMS].entry_count) { + vl_fwd_params = tables[BLK_IDX_VL_FORWARDING_PARAMS].entries; + for (i = 0; i < 8; i++) + mem += vl_fwd_params->partspc[i]; + } + + if (tables[BLK_IDX_RETAGGING].entry_count) + max_mem -= SJA1105_FRAME_MEMORY_RETAGGING_OVERHEAD; + + if (mem > max_mem) + return SJA1105_OVERCOMMITTED_FRAME_MEMORY; + + return SJA1105_CONFIG_OK; +} + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config, + int max_mem) +{ + const struct sja1105_table *tables = config->tables; +#define IS_FULL(blk_idx) \ + (tables[blk_idx].entry_count == tables[blk_idx].ops->max_entry_count) + + if (tables[BLK_IDX_SCHEDULE].entry_count) { + if (!tables[BLK_IDX_SCHEDULE].ops->max_entry_count) + return SJA1105_TTETHERNET_NOT_SUPPORTED; + + if (tables[BLK_IDX_SCHEDULE_ENTRY_POINTS].entry_count == 0) + return SJA1105_INCORRECT_TTETHERNET_CONFIGURATION; + + if (!IS_FULL(BLK_IDX_SCHEDULE_PARAMS)) + return SJA1105_INCORRECT_TTETHERNET_CONFIGURATION; + + if (!IS_FULL(BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS)) + return SJA1105_INCORRECT_TTETHERNET_CONFIGURATION; + } + if (tables[BLK_IDX_VL_LOOKUP].entry_count) { + struct sja1105_vl_lookup_entry *vl_lookup; + bool has_critical_links = false; + int i; + + vl_lookup = tables[BLK_IDX_VL_LOOKUP].entries; + + for (i = 0; i < tables[BLK_IDX_VL_LOOKUP].entry_count; i++) { + if (vl_lookup[i].iscritical) { + has_critical_links = true; + break; + } + } + + if (tables[BLK_IDX_VL_POLICING].entry_count == 0 && + has_critical_links) + return SJA1105_INCORRECT_VIRTUAL_LINK_CONFIGURATION; + + if (tables[BLK_IDX_VL_FORWARDING].entry_count == 0 && + has_critical_links) + return SJA1105_INCORRECT_VIRTUAL_LINK_CONFIGURATION; + + if (tables[BLK_IDX_VL_FORWARDING_PARAMS].entry_count == 0 && + has_critical_links) + return SJA1105_INCORRECT_VIRTUAL_LINK_CONFIGURATION; + } + + if (tables[BLK_IDX_L2_POLICING].entry_count == 0) + return SJA1105_MISSING_L2_POLICING_TABLE; + + if (tables[BLK_IDX_VLAN_LOOKUP].entry_count == 0) + return SJA1105_MISSING_VLAN_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING)) + return SJA1105_MISSING_L2_FORWARDING_TABLE; + + if (!IS_FULL(BLK_IDX_MAC_CONFIG)) + return SJA1105_MISSING_MAC_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING_PARAMS)) + return SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_GENERAL_PARAMS)) + return SJA1105_MISSING_GENERAL_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_XMII_PARAMS)) + return SJA1105_MISSING_XMII_TABLE; + + return static_config_check_memory_size(tables, max_mem); +#undef IS_FULL +} + +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config) +{ + struct sja1105_table_header header = {0}; + enum sja1105_blk_idx i; + char *p = buf; + int j; + + sja1105_pack(p, &config->device_id, 31, 0, 4); + p += SJA1105_SIZE_DEVICE_ID; + + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + char *table_start; + + table = &config->tables[i]; + if (!table->entry_count) + continue; + + header.block_id = blk_id_map[i]; + header.len = table->entry_count * + table->ops->packed_entry_size / 4; + sja1105_table_header_pack_with_crc(p, &header); + p += SJA1105_SIZE_TABLE_HEADER; + table_start = p; + for (j = 0; j < table->entry_count; j++) { + u8 *entry_ptr = table->entries; + + entry_ptr += j * table->ops->unpacked_entry_size; + memset(p, 0, table->ops->packed_entry_size); + table->ops->packing(p, entry_ptr, PACK); + p += table->ops->packed_entry_size; + } + sja1105_table_write_crc(table_start, p); + p += 4; + } + /* Final header: + * Block ID does not matter + * Length of 0 marks that header is final + * CRC will be replaced on-the-fly on "config upload" + */ + header.block_id = 0; + header.len = 0; + header.crc = 0xDEADBEEF; + memset(p, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(p, &header, PACK); +} + +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config) +{ + unsigned int sum; + unsigned int header_count; + enum sja1105_blk_idx i; + + /* Ending header */ + header_count = 1; + sum = SJA1105_SIZE_DEVICE_ID; + + /* Tables (headers and entries) */ + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + + table = &config->tables[i]; + if (table->entry_count) + header_count++; + + sum += table->ops->packed_entry_size * table->entry_count; + } + /* Headers have an additional CRC at the end */ + sum += header_count * (SJA1105_SIZE_TABLE_HEADER + 4); + /* Last header does not have an extra CRC because there is no data */ + sum -= 4; + + return sum; +} + +/* Compatibility matrices */ + +/* SJA1105E: First generation, no TTEthernet */ +const struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105et_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105ET_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_RETAGGING] = { + .packing = sja1105_retagging_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_retagging_entry), + .packed_entry_size = SJA1105_SIZE_RETAGGING_ENTRY, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105T: First generation, TTEthernet */ +const struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_SCHEDULE] = { + .packing = sja1105_schedule_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS] = { + .packing = sja1105_schedule_entry_points_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_COUNT, + }, + [BLK_IDX_VL_LOOKUP] = { + .packing = sja1105_vl_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VL_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT, + }, + [BLK_IDX_VL_POLICING] = { + .packing = sja1105_vl_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_policing_entry), + .packed_entry_size = SJA1105_SIZE_VL_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_VL_POLICING_COUNT, + }, + [BLK_IDX_VL_FORWARDING] = { + .packing = sja1105_vl_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_VL_FORWARDING_COUNT, + }, + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_SCHEDULE_PARAMS] = { + .packing = sja1105_schedule_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_PARAMS_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS] = { + .packing = sja1105_schedule_entry_points_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_PARAMS_COUNT, + }, + [BLK_IDX_VL_FORWARDING_PARAMS] = { + .packing = sja1105_vl_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_VL_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105et_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105ET_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_RETAGGING] = { + .packing = sja1105_retagging_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_retagging_entry), + .packed_entry_size = SJA1105_SIZE_RETAGGING_ENTRY, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105P: Second generation, no TTEthernet, no SGMII */ +const struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_RETAGGING] = { + .packing = sja1105_retagging_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_retagging_entry), + .packed_entry_size = SJA1105_SIZE_RETAGGING_ENTRY, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105Q: Second generation, TTEthernet, no SGMII */ +const struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_SCHEDULE] = { + .packing = sja1105_schedule_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS] = { + .packing = sja1105_schedule_entry_points_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_COUNT, + }, + [BLK_IDX_VL_LOOKUP] = { + .packing = sja1105_vl_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VL_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT, + }, + [BLK_IDX_VL_POLICING] = { + .packing = sja1105_vl_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_policing_entry), + .packed_entry_size = SJA1105_SIZE_VL_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_VL_POLICING_COUNT, + }, + [BLK_IDX_VL_FORWARDING] = { + .packing = sja1105_vl_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_VL_FORWARDING_COUNT, + }, + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_SCHEDULE_PARAMS] = { + .packing = sja1105_schedule_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_PARAMS_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS] = { + .packing = sja1105_schedule_entry_points_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_PARAMS_COUNT, + }, + [BLK_IDX_VL_FORWARDING_PARAMS] = { + .packing = sja1105_vl_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_VL_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_RETAGGING] = { + .packing = sja1105_retagging_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_retagging_entry), + .packed_entry_size = SJA1105_SIZE_RETAGGING_ENTRY, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105R: Second generation, no TTEthernet, SGMII */ +const struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_RETAGGING] = { + .packing = sja1105_retagging_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_retagging_entry), + .packed_entry_size = SJA1105_SIZE_RETAGGING_ENTRY, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105S: Second generation, TTEthernet, SGMII */ +const struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_SCHEDULE] = { + .packing = sja1105_schedule_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS] = { + .packing = sja1105_schedule_entry_points_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_COUNT, + }, + [BLK_IDX_VL_LOOKUP] = { + .packing = sja1105_vl_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VL_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT, + }, + [BLK_IDX_VL_POLICING] = { + .packing = sja1105_vl_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_policing_entry), + .packed_entry_size = SJA1105_SIZE_VL_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_VL_POLICING_COUNT, + }, + [BLK_IDX_VL_FORWARDING] = { + .packing = sja1105_vl_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_VL_FORWARDING_COUNT, + }, + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_SCHEDULE_PARAMS] = { + .packing = sja1105_schedule_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_PARAMS_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS] = { + .packing = sja1105_schedule_entry_points_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_PARAMS_COUNT, + }, + [BLK_IDX_VL_FORWARDING_PARAMS] = { + .packing = sja1105_vl_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_VL_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_RETAGGING] = { + .packing = sja1105_retagging_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_retagging_entry), + .packed_entry_size = SJA1105_SIZE_RETAGGING_ENTRY, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1110A: Third generation */ +const struct sja1105_table_ops sja1110_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_SCHEDULE] = { + .packing = sja1110_schedule_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry), + .packed_entry_size = SJA1110_SIZE_SCHEDULE_ENTRY, + .max_entry_count = SJA1110_MAX_SCHEDULE_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS] = { + .packing = sja1110_schedule_entry_points_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_entry), + .packed_entry_size = SJA1110_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_COUNT, + }, + [BLK_IDX_VL_LOOKUP] = { + .packing = sja1110_vl_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VL_LOOKUP_ENTRY, + .max_entry_count = SJA1110_MAX_VL_LOOKUP_COUNT, + }, + [BLK_IDX_VL_POLICING] = { + .packing = sja1110_vl_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_policing_entry), + .packed_entry_size = SJA1105_SIZE_VL_POLICING_ENTRY, + .max_entry_count = SJA1110_MAX_VL_POLICING_COUNT, + }, + [BLK_IDX_VL_FORWARDING] = { + .packing = sja1110_vl_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_ENTRY, + .max_entry_count = SJA1110_MAX_VL_FORWARDING_COUNT, + }, + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1110_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1110_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1110_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1110_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1110_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1110_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1110_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1110_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1110_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1110_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_SCHEDULE_PARAMS] = { + .packing = sja1110_schedule_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_PARAMS_COUNT, + }, + [BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS] = { + .packing = sja1105_schedule_entry_points_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_schedule_entry_points_params_entry), + .packed_entry_size = SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_PARAMS_COUNT, + }, + [BLK_IDX_VL_FORWARDING_PARAMS] = { + .packing = sja1110_vl_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vl_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_VL_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_VL_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1110_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1110_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1110_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1110_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1110_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_RETAGGING] = { + .packing = sja1110_retagging_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_retagging_entry), + .packed_entry_size = SJA1105_SIZE_RETAGGING_ENTRY, + .max_entry_count = SJA1105_MAX_RETAGGING_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1110_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1110_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, + [BLK_IDX_PCP_REMAPPING] = { + .packing = sja1110_pcp_remapping_entry_packing, + .unpacked_entry_size = sizeof(struct sja1110_pcp_remapping_entry), + .packed_entry_size = SJA1110_SIZE_PCP_REMAPPING_ENTRY, + .max_entry_count = SJA1110_MAX_PCP_REMAPPING_COUNT, + }, +}; + +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id) +{ + enum sja1105_blk_idx i; + + *config = (struct sja1105_static_config) {0}; + + /* Transfer static_ops array from priv into per-table ops + * for handier access + */ + for (i = 0; i < BLK_IDX_MAX; i++) + config->tables[i].ops = &static_ops[i]; + + config->device_id = device_id; + return 0; +} + +void sja1105_static_config_free(struct sja1105_static_config *config) +{ + enum sja1105_blk_idx i; + + for (i = 0; i < BLK_IDX_MAX; i++) { + if (config->tables[i].entry_count) { + kfree(config->tables[i].entries); + config->tables[i].entry_count = 0; + } + } +} + +int sja1105_table_delete_entry(struct sja1105_table *table, int i) +{ + size_t entry_size = table->ops->unpacked_entry_size; + u8 *entries = table->entries; + + if (i > table->entry_count) + return -ERANGE; + + memmove(entries + i * entry_size, entries + (i + 1) * entry_size, + (table->entry_count - i) * entry_size); + + table->entry_count--; + + return 0; +} + +/* No pointers to table->entries should be kept when this is called. */ +int sja1105_table_resize(struct sja1105_table *table, size_t new_count) +{ + size_t entry_size = table->ops->unpacked_entry_size; + void *new_entries, *old_entries = table->entries; + + if (new_count > table->ops->max_entry_count) + return -ERANGE; + + new_entries = kcalloc(new_count, entry_size, GFP_KERNEL); + if (!new_entries) + return -ENOMEM; + + memcpy(new_entries, old_entries, min(new_count, table->entry_count) * + entry_size); + + table->entries = new_entries; + table->entry_count = new_count; + kfree(old_entries); + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h new file mode 100644 index 0000000000..6a372d5f22 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -0,0 +1,548 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* Copyright 2016-2018 NXP + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_STATIC_CONFIG_H +#define _SJA1105_STATIC_CONFIG_H + +#include <linux/packing.h> +#include <linux/types.h> +#include <asm/types.h> + +#define SJA1105_NUM_PORTS 5 +#define SJA1110_NUM_PORTS 11 +#define SJA1105_MAX_NUM_PORTS SJA1110_NUM_PORTS +#define SJA1105_NUM_TC 8 + +#define SJA1105_SIZE_SPI_MSG_HEADER 4 +#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4) +#define SJA1105_SIZE_DEVICE_ID 4 +#define SJA1105_SIZE_TABLE_HEADER 12 +#define SJA1105_SIZE_SCHEDULE_ENTRY 8 +#define SJA1110_SIZE_SCHEDULE_ENTRY 12 +#define SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY 4 +#define SJA1110_SIZE_SCHEDULE_ENTRY_POINTS_ENTRY 8 +#define SJA1105_SIZE_VL_LOOKUP_ENTRY 12 +#define SJA1105_SIZE_VL_POLICING_ENTRY 8 +#define SJA1105_SIZE_VL_FORWARDING_ENTRY 4 +#define SJA1105_SIZE_L2_POLICING_ENTRY 8 +#define SJA1105_SIZE_VLAN_LOOKUP_ENTRY 8 +#define SJA1110_SIZE_VLAN_LOOKUP_ENTRY 12 +#define SJA1105_SIZE_L2_FORWARDING_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY 12 +#define SJA1105_SIZE_RETAGGING_ENTRY 8 +#define SJA1105_SIZE_XMII_PARAMS_ENTRY 4 +#define SJA1110_SIZE_XMII_PARAMS_ENTRY 8 +#define SJA1105_SIZE_SCHEDULE_PARAMS_ENTRY 12 +#define SJA1105_SIZE_SCHEDULE_ENTRY_POINTS_PARAMS_ENTRY 4 +#define SJA1105_SIZE_VL_FORWARDING_PARAMS_ENTRY 12 +#define SJA1105ET_SIZE_L2_LOOKUP_ENTRY 12 +#define SJA1105ET_SIZE_MAC_CONFIG_ENTRY 28 +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY 4 +#define SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY 40 +#define SJA1105ET_SIZE_AVB_PARAMS_ENTRY 12 +#define SJA1105ET_SIZE_CBS_ENTRY 16 +#define SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY 20 +#define SJA1110_SIZE_L2_LOOKUP_ENTRY 24 +#define SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY 32 +#define SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY 16 +#define SJA1110_SIZE_L2_LOOKUP_PARAMS_ENTRY 28 +#define SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY 44 +#define SJA1110_SIZE_GENERAL_PARAMS_ENTRY 56 +#define SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY 16 +#define SJA1105PQRS_SIZE_CBS_ENTRY 20 +#define SJA1110_SIZE_PCP_REMAPPING_ENTRY 4 + +/* UM10944.pdf Page 11, Table 2. Configuration Blocks */ +enum { + BLKID_SCHEDULE = 0x00, + BLKID_SCHEDULE_ENTRY_POINTS = 0x01, + BLKID_VL_LOOKUP = 0x02, + BLKID_VL_POLICING = 0x03, + BLKID_VL_FORWARDING = 0x04, + BLKID_L2_LOOKUP = 0x05, + BLKID_L2_POLICING = 0x06, + BLKID_VLAN_LOOKUP = 0x07, + BLKID_L2_FORWARDING = 0x08, + BLKID_MAC_CONFIG = 0x09, + BLKID_SCHEDULE_PARAMS = 0x0A, + BLKID_SCHEDULE_ENTRY_POINTS_PARAMS = 0x0B, + BLKID_VL_FORWARDING_PARAMS = 0x0C, + BLKID_L2_LOOKUP_PARAMS = 0x0D, + BLKID_L2_FORWARDING_PARAMS = 0x0E, + BLKID_AVB_PARAMS = 0x10, + BLKID_GENERAL_PARAMS = 0x11, + BLKID_RETAGGING = 0x12, + BLKID_CBS = 0x13, + BLKID_PCP_REMAPPING = 0x1C, + BLKID_XMII_PARAMS = 0x4E, +}; + +enum sja1105_blk_idx { + BLK_IDX_SCHEDULE = 0, + BLK_IDX_SCHEDULE_ENTRY_POINTS, + BLK_IDX_VL_LOOKUP, + BLK_IDX_VL_POLICING, + BLK_IDX_VL_FORWARDING, + BLK_IDX_L2_LOOKUP, + BLK_IDX_L2_POLICING, + BLK_IDX_VLAN_LOOKUP, + BLK_IDX_L2_FORWARDING, + BLK_IDX_MAC_CONFIG, + BLK_IDX_SCHEDULE_PARAMS, + BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS, + BLK_IDX_VL_FORWARDING_PARAMS, + BLK_IDX_L2_LOOKUP_PARAMS, + BLK_IDX_L2_FORWARDING_PARAMS, + BLK_IDX_AVB_PARAMS, + BLK_IDX_GENERAL_PARAMS, + BLK_IDX_RETAGGING, + BLK_IDX_CBS, + BLK_IDX_XMII_PARAMS, + BLK_IDX_PCP_REMAPPING, + BLK_IDX_MAX, + /* Fake block indices that are only valid for dynamic access */ + BLK_IDX_MGMT_ROUTE, + BLK_IDX_MAX_DYN, + BLK_IDX_INVAL = -1, +}; + +#define SJA1105_MAX_SCHEDULE_COUNT 1024 +#define SJA1110_MAX_SCHEDULE_COUNT 4096 +#define SJA1105_MAX_SCHEDULE_ENTRY_POINTS_COUNT 2048 +#define SJA1105_MAX_VL_LOOKUP_COUNT 1024 +#define SJA1110_MAX_VL_LOOKUP_COUNT 4096 +#define SJA1105_MAX_VL_POLICING_COUNT 1024 +#define SJA1110_MAX_VL_POLICING_COUNT 4096 +#define SJA1105_MAX_VL_FORWARDING_COUNT 1024 +#define SJA1110_MAX_VL_FORWARDING_COUNT 4096 +#define SJA1105_MAX_L2_LOOKUP_COUNT 1024 +#define SJA1105_MAX_L2_POLICING_COUNT 45 +#define SJA1110_MAX_L2_POLICING_COUNT 110 +#define SJA1105_MAX_VLAN_LOOKUP_COUNT 4096 +#define SJA1105_MAX_L2_FORWARDING_COUNT 13 +#define SJA1110_MAX_L2_FORWARDING_COUNT 19 +#define SJA1105_MAX_MAC_CONFIG_COUNT 5 +#define SJA1110_MAX_MAC_CONFIG_COUNT 11 +#define SJA1105_MAX_SCHEDULE_PARAMS_COUNT 1 +#define SJA1105_MAX_SCHEDULE_ENTRY_POINTS_PARAMS_COUNT 1 +#define SJA1105_MAX_VL_FORWARDING_PARAMS_COUNT 1 +#define SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT 1 +#define SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT 1 +#define SJA1105_MAX_GENERAL_PARAMS_COUNT 1 +#define SJA1105_MAX_RETAGGING_COUNT 32 +#define SJA1105_MAX_XMII_PARAMS_COUNT 1 +#define SJA1105_MAX_AVB_PARAMS_COUNT 1 +#define SJA1105ET_MAX_CBS_COUNT 10 +#define SJA1105PQRS_MAX_CBS_COUNT 16 +#define SJA1110_MAX_CBS_COUNT 80 +#define SJA1110_MAX_PCP_REMAPPING_COUNT 11 + +#define SJA1105_MAX_FRAME_MEMORY 929 +#define SJA1110_MAX_FRAME_MEMORY 1820 +#define SJA1105_FRAME_MEMORY_RETAGGING_OVERHEAD 19 +#define SJA1105_VL_FRAME_MEMORY 100 + +#define SJA1105E_DEVICE_ID 0x9C00000Cull +#define SJA1105T_DEVICE_ID 0x9E00030Eull +#define SJA1105PR_DEVICE_ID 0xAF00030Eull +#define SJA1105QS_DEVICE_ID 0xAE00030Eull +#define SJA1110_DEVICE_ID 0xB700030Full + +#define SJA1105ET_PART_NO 0x9A83 +#define SJA1105P_PART_NO 0x9A84 +#define SJA1105Q_PART_NO 0x9A85 +#define SJA1105R_PART_NO 0x9A86 +#define SJA1105S_PART_NO 0x9A87 +#define SJA1110A_PART_NO 0x1110 +#define SJA1110B_PART_NO 0x1111 +#define SJA1110C_PART_NO 0x1112 +#define SJA1110D_PART_NO 0x1113 + +#define SJA1110_ACU 0x1c4400 +#define SJA1110_RGU 0x1c6000 +#define SJA1110_CGU 0x1c6400 + +#define SJA1110_SPI_ADDR(x) ((x) / 4) +#define SJA1110_ACU_ADDR(x) (SJA1110_ACU + SJA1110_SPI_ADDR(x)) +#define SJA1110_CGU_ADDR(x) (SJA1110_CGU + SJA1110_SPI_ADDR(x)) +#define SJA1110_RGU_ADDR(x) (SJA1110_RGU + SJA1110_SPI_ADDR(x)) + +#define SJA1105_RSV_ADDR 0xffffffffffffffffull + +struct sja1105_schedule_entry { + u64 winstindex; + u64 winend; + u64 winst; + u64 destports; + u64 setvalid; + u64 txen; + u64 resmedia_en; + u64 resmedia; + u64 vlindex; + u64 delta; +}; + +struct sja1105_schedule_params_entry { + u64 subscheind[8]; +}; + +struct sja1105_general_params_entry { + u64 vllupformat; + u64 mirr_ptacu; + u64 switchid; + u64 hostprio; + u64 mac_fltres1; + u64 mac_fltres0; + u64 mac_flt1; + u64 mac_flt0; + u64 incl_srcpt1; + u64 incl_srcpt0; + u64 send_meta1; + u64 send_meta0; + u64 casc_port; + u64 host_port; + u64 mirr_port; + u64 vlmarker; + u64 vlmask; + u64 tpid; + u64 ignore2stf; + u64 tpid2; + /* P/Q/R/S only */ + u64 queue_ts; + u64 egrmirrvid; + u64 egrmirrpcp; + u64 egrmirrdei; + u64 replay_port; + /* SJA1110 only */ + u64 tte_en; + u64 tdmaconfigidx; + u64 header_type; +}; + +struct sja1105_schedule_entry_points_entry { + u64 subschindx; + u64 delta; + u64 address; +}; + +struct sja1105_schedule_entry_points_params_entry { + u64 clksrc; + u64 actsubsch; +}; + +struct sja1105_vlan_lookup_entry { + u64 ving_mirr; + u64 vegr_mirr; + u64 vmemb_port; + u64 vlan_bc; + u64 tag_port; + u64 vlanid; + u64 type_entry; /* SJA1110 only */ +}; + +struct sja1105_l2_lookup_entry { + u64 vlanid; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; + /* P/Q/R/S only */ + u64 mask_iotag; + u64 mask_vlanid; + u64 mask_macaddr; + u64 mask_srcport; + u64 iotag; + u64 srcport; + u64 lockeds; + union { + /* LOCKEDS=1: Static FDB entries */ + struct { + /* TSREG is deprecated in SJA1110, TRAP is supported only + * in SJA1110. + */ + u64 trap; + u64 tsreg; + u64 mirrvlan; + u64 takets; + u64 mirr; + u64 retag; + }; + /* LOCKEDS=0: Dynamically learned FDB entries */ + struct { + u64 touched; + u64 age; + }; + }; +}; + +struct sja1105_l2_lookup_params_entry { + u64 maxaddrp[SJA1105_MAX_NUM_PORTS]; /* P/Q/R/S only */ + u64 start_dynspc; /* P/Q/R/S only */ + u64 drpnolearn; /* P/Q/R/S only */ + u64 use_static; /* P/Q/R/S only */ + u64 owr_dyn; /* P/Q/R/S only */ + u64 learn_once; /* P/Q/R/S only */ + u64 maxage; /* Shared */ + u64 dyn_tbsz; /* E/T only */ + u64 poly; /* E/T only */ + u64 shared_learn; /* Shared */ + u64 no_enf_hostprt; /* Shared */ + u64 no_mgmt_learn; /* Shared */ +}; + +struct sja1105_l2_forwarding_entry { + u64 bc_domain; + u64 reach_port; + u64 fl_domain; + /* This is actually max(SJA1105_NUM_TC, SJA1105_MAX_NUM_PORTS) */ + u64 vlan_pmap[SJA1105_MAX_NUM_PORTS]; + bool type_egrpcp2outputq; +}; + +struct sja1105_l2_forwarding_params_entry { + u64 max_dynp; + u64 part_spc[8]; +}; + +struct sja1105_l2_policing_entry { + u64 sharindx; + u64 smax; + u64 rate; + u64 maxlen; + u64 partition; +}; + +struct sja1105_avb_params_entry { + u64 cas_master; + u64 destmeta; + u64 srcmeta; +}; + +struct sja1105_mac_config_entry { + u64 top[8]; + u64 base[8]; + u64 enabled[8]; + u64 ifg; + u64 speed; + u64 tp_delin; + u64 tp_delout; + u64 maxage; + u64 vlanprio; + u64 vlanid; + u64 ing_mirr; + u64 egr_mirr; + u64 drpnona664; + u64 drpdtag; + u64 drpuntag; + u64 retag; + u64 dyn_learn; + u64 egress; + u64 ingress; +}; + +struct sja1105_retagging_entry { + u64 egr_port; + u64 ing_port; + u64 vlan_ing; + u64 vlan_egr; + u64 do_not_learn; + u64 use_dest_ports; + u64 destports; +}; + +struct sja1105_cbs_entry { + u64 port; /* Not used for SJA1110 */ + u64 prio; /* Not used for SJA1110 */ + u64 credit_hi; + u64 credit_lo; + u64 send_slope; + u64 idle_slope; +}; + +struct sja1105_xmii_params_entry { + u64 phy_mac[SJA1105_MAX_NUM_PORTS]; + u64 xmii_mode[SJA1105_MAX_NUM_PORTS]; + /* The SJA1110 insists being a snowflake, and requires SGMII, + * 2500base-x and internal MII ports connected to the 100base-TX PHY to + * set this bit. We set it unconditionally from the high-level logic, + * and only sja1110_xmii_params_entry_packing writes it to the static + * config. I have no better name for it than "special". + */ + u64 special[SJA1105_MAX_NUM_PORTS]; +}; + +struct sja1110_pcp_remapping_entry { + u64 egrpcp[SJA1105_NUM_TC]; +}; + +enum { + SJA1105_VL_FORMAT_PSFP = 0, + SJA1105_VL_FORMAT_ARINC664 = 1, +}; + +struct sja1105_vl_lookup_entry { + u64 format; + u64 port; + union { + /* SJA1105_VL_FORMAT_PSFP */ + struct { + u64 destports; + u64 iscritical; + u64 macaddr; + u64 vlanid; + u64 vlanprior; + }; + /* SJA1105_VL_FORMAT_ARINC664 */ + struct { + u64 egrmirr; + u64 ingrmirr; + u64 vlid; + }; + }; + /* Not part of hardware structure */ + unsigned long flow_cookie; +}; + +struct sja1105_vl_policing_entry { + u64 type; + u64 maxlen; + u64 sharindx; + u64 bag; + u64 jitter; +}; + +struct sja1105_vl_forwarding_entry { + u64 type; + u64 priority; + u64 partition; + u64 destports; +}; + +struct sja1105_vl_forwarding_params_entry { + u64 partspc[8]; + u64 debugen; +}; + +struct sja1105_table_header { + u64 block_id; + u64 len; + u64 crc; +}; + +struct sja1105_table_ops { + size_t (*packing)(void *buf, void *entry_ptr, enum packing_op op); + size_t unpacked_entry_size; + size_t packed_entry_size; + size_t max_entry_count; +}; + +struct sja1105_table { + const struct sja1105_table_ops *ops; + size_t entry_count; + void *entries; +}; + +struct sja1105_static_config { + u64 device_id; + struct sja1105_table tables[BLK_IDX_MAX]; +}; + +extern const struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX]; +extern const struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX]; +extern const struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX]; +extern const struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX]; +extern const struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX]; +extern const struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX]; +extern const struct sja1105_table_ops sja1110_table_ops[BLK_IDX_MAX]; + +size_t sja1105_table_header_packing(void *buf, void *hdr, enum packing_op op); +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr); +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config); + +typedef enum { + SJA1105_CONFIG_OK = 0, + SJA1105_TTETHERNET_NOT_SUPPORTED, + SJA1105_INCORRECT_TTETHERNET_CONFIGURATION, + SJA1105_INCORRECT_VIRTUAL_LINK_CONFIGURATION, + SJA1105_MISSING_L2_POLICING_TABLE, + SJA1105_MISSING_L2_FORWARDING_TABLE, + SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE, + SJA1105_MISSING_GENERAL_PARAMS_TABLE, + SJA1105_MISSING_VLAN_TABLE, + SJA1105_MISSING_XMII_TABLE, + SJA1105_MISSING_MAC_TABLE, + SJA1105_OVERCOMMITTED_FRAME_MEMORY, +} sja1105_config_valid_t; + +extern const char *sja1105_static_config_error_msg[]; + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config, + int max_mem); +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config); +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id); +void sja1105_static_config_free(struct sja1105_static_config *config); + +int sja1105_table_delete_entry(struct sja1105_table *table, int i); +int sja1105_table_resize(struct sja1105_table *table, size_t new_count); + +u32 sja1105_crc32(const void *buf, size_t len); + +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len); +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len); +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op); + +/* Common implementations for the static and dynamic configs */ +size_t sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105_retagging_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_retagging_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_avb_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105_vl_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_vl_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_vl_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1110_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c new file mode 100644 index 0000000000..d7818710bc --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_tas.c @@ -0,0 +1,900 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105.h" + +#define SJA1105_TAS_CLKSRC_DISABLED 0 +#define SJA1105_TAS_CLKSRC_STANDALONE 1 +#define SJA1105_TAS_CLKSRC_AS6802 2 +#define SJA1105_TAS_CLKSRC_PTP 3 +#define SJA1105_GATE_MASK GENMASK_ULL(SJA1105_NUM_TC - 1, 0) + +#define work_to_sja1105_tas(d) \ + container_of((d), struct sja1105_tas_data, tas_work) +#define tas_to_sja1105(d) \ + container_of((d), struct sja1105_private, tas_data) + +static int sja1105_tas_set_runtime_params(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct sja1105_gating_config *gating_cfg = &tas_data->gating_cfg; + struct dsa_switch *ds = priv->ds; + s64 earliest_base_time = S64_MAX; + s64 latest_base_time = 0; + s64 its_cycle_time = 0; + s64 max_cycle_time = 0; + int port; + + tas_data->enabled = false; + + for (port = 0; port < ds->num_ports; port++) { + const struct tc_taprio_qopt_offload *offload; + + offload = tas_data->offload[port]; + if (!offload) + continue; + + tas_data->enabled = true; + + if (max_cycle_time < offload->cycle_time) + max_cycle_time = offload->cycle_time; + if (latest_base_time < offload->base_time) + latest_base_time = offload->base_time; + if (earliest_base_time > offload->base_time) { + earliest_base_time = offload->base_time; + its_cycle_time = offload->cycle_time; + } + } + + if (!list_empty(&gating_cfg->entries)) { + tas_data->enabled = true; + + if (max_cycle_time < gating_cfg->cycle_time) + max_cycle_time = gating_cfg->cycle_time; + if (latest_base_time < gating_cfg->base_time) + latest_base_time = gating_cfg->base_time; + if (earliest_base_time > gating_cfg->base_time) { + earliest_base_time = gating_cfg->base_time; + its_cycle_time = gating_cfg->cycle_time; + } + } + + if (!tas_data->enabled) + return 0; + + /* Roll the earliest base time over until it is in a comparable + * time base with the latest, then compare their deltas. + * We want to enforce that all ports' base times are within + * SJA1105_TAS_MAX_DELTA 200ns cycles of one another. + */ + earliest_base_time = future_base_time(earliest_base_time, + its_cycle_time, + latest_base_time); + while (earliest_base_time > latest_base_time) + earliest_base_time -= its_cycle_time; + if (latest_base_time - earliest_base_time > + sja1105_delta_to_ns(SJA1105_TAS_MAX_DELTA)) { + dev_err(ds->dev, + "Base times too far apart: min %llu max %llu\n", + earliest_base_time, latest_base_time); + return -ERANGE; + } + + tas_data->earliest_base_time = earliest_base_time; + tas_data->max_cycle_time = max_cycle_time; + + dev_dbg(ds->dev, "earliest base time %lld ns\n", earliest_base_time); + dev_dbg(ds->dev, "latest base time %lld ns\n", latest_base_time); + dev_dbg(ds->dev, "longest cycle time %lld ns\n", max_cycle_time); + + return 0; +} + +/* Lo and behold: the egress scheduler from hell. + * + * At the hardware level, the Time-Aware Shaper holds a global linear arrray of + * all schedule entries for all ports. These are the Gate Control List (GCL) + * entries, let's call them "timeslots" for short. This linear array of + * timeslots is held in BLK_IDX_SCHEDULE. + * + * Then there are a maximum of 8 "execution threads" inside the switch, which + * iterate cyclically through the "schedule". Each "cycle" has an entry point + * and an exit point, both being timeslot indices in the schedule table. The + * hardware calls each cycle a "subschedule". + * + * Subschedule (cycle) i starts when + * ptpclkval >= ptpschtm + BLK_IDX_SCHEDULE_ENTRY_POINTS[i].delta. + * + * The hardware scheduler iterates BLK_IDX_SCHEDULE with a k ranging from + * k = BLK_IDX_SCHEDULE_ENTRY_POINTS[i].address to + * k = BLK_IDX_SCHEDULE_PARAMS.subscheind[i] + * + * For each schedule entry (timeslot) k, the engine executes the gate control + * list entry for the duration of BLK_IDX_SCHEDULE[k].delta. + * + * +---------+ + * | | BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS + * +---------+ + * | + * +-----------------+ + * | .actsubsch + * BLK_IDX_SCHEDULE_ENTRY_POINTS v + * +-------+-------+ + * |cycle 0|cycle 1| + * +-------+-------+ + * | | | | + * +----------------+ | | +-------------------------------------+ + * | .subschindx | | .subschindx | + * | | +---------------+ | + * | .address | .address | | + * | | | | + * | | | | + * | BLK_IDX_SCHEDULE v v | + * | +-------+-------+-------+-------+-------+------+ | + * | |entry 0|entry 1|entry 2|entry 3|entry 4|entry5| | + * | +-------+-------+-------+-------+-------+------+ | + * | ^ ^ ^ ^ | + * | | | | | | + * | +-------------------------+ | | | | + * | | +-------------------------------+ | | | + * | | | +-------------------+ | | + * | | | | | | + * | +---------------------------------------------------------------+ | + * | |subscheind[0]<=subscheind[1]<=subscheind[2]<=...<=subscheind[7]| | + * | +---------------------------------------------------------------+ | + * | ^ ^ BLK_IDX_SCHEDULE_PARAMS | + * | | | | + * +--------+ +-------------------------------------------+ + * + * In the above picture there are two subschedules (cycles): + * + * - cycle 0: iterates the schedule table from 0 to 2 (and back) + * - cycle 1: iterates the schedule table from 3 to 5 (and back) + * + * All other possible execution threads must be marked as unused by making + * their "subschedule end index" (subscheind) equal to the last valid + * subschedule's end index (in this case 5). + */ +int sja1105_init_scheduling(struct sja1105_private *priv) +{ + struct sja1105_schedule_entry_points_entry *schedule_entry_points; + struct sja1105_schedule_entry_points_params_entry + *schedule_entry_points_params; + struct sja1105_schedule_params_entry *schedule_params; + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct sja1105_gating_config *gating_cfg = &tas_data->gating_cfg; + struct sja1105_schedule_entry *schedule; + struct dsa_switch *ds = priv->ds; + struct sja1105_table *table; + int schedule_start_idx; + s64 entry_point_delta; + int schedule_end_idx; + int num_entries = 0; + int num_cycles = 0; + int cycle = 0; + int i, k = 0; + int port, rc; + + rc = sja1105_tas_set_runtime_params(priv); + if (rc < 0) + return rc; + + /* Discard previous Schedule Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Discard previous Schedule Entry Points Parameters Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Discard previous Schedule Parameters Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE_PARAMS]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Discard previous Schedule Entry Points Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE_ENTRY_POINTS]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Figure out the dimensioning of the problem */ + for (port = 0; port < ds->num_ports; port++) { + if (tas_data->offload[port]) { + num_entries += tas_data->offload[port]->num_entries; + num_cycles++; + } + } + + if (!list_empty(&gating_cfg->entries)) { + num_entries += gating_cfg->num_entries; + num_cycles++; + } + + /* Nothing to do */ + if (!num_cycles) + return 0; + + /* Pre-allocate space in the static config tables */ + + /* Schedule Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE]; + table->entries = kcalloc(num_entries, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + table->entry_count = num_entries; + schedule = table->entries; + + /* Schedule Points Parameters Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS]; + table->entries = kcalloc(SJA1105_MAX_SCHEDULE_ENTRY_POINTS_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + /* Previously allocated memory will be freed automatically in + * sja1105_static_config_free. This is true for all early + * returns below. + */ + return -ENOMEM; + table->entry_count = SJA1105_MAX_SCHEDULE_ENTRY_POINTS_PARAMS_COUNT; + schedule_entry_points_params = table->entries; + + /* Schedule Parameters Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE_PARAMS]; + table->entries = kcalloc(SJA1105_MAX_SCHEDULE_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + table->entry_count = SJA1105_MAX_SCHEDULE_PARAMS_COUNT; + schedule_params = table->entries; + + /* Schedule Entry Points Table */ + table = &priv->static_config.tables[BLK_IDX_SCHEDULE_ENTRY_POINTS]; + table->entries = kcalloc(num_cycles, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + table->entry_count = num_cycles; + schedule_entry_points = table->entries; + + /* Finally start populating the static config tables */ + schedule_entry_points_params->clksrc = SJA1105_TAS_CLKSRC_PTP; + schedule_entry_points_params->actsubsch = num_cycles - 1; + + for (port = 0; port < ds->num_ports; port++) { + const struct tc_taprio_qopt_offload *offload; + /* Relative base time */ + s64 rbt; + + offload = tas_data->offload[port]; + if (!offload) + continue; + + schedule_start_idx = k; + schedule_end_idx = k + offload->num_entries - 1; + /* This is the base time expressed as a number of TAS ticks + * relative to PTPSCHTM, which we'll (perhaps improperly) call + * the operational base time. + */ + rbt = future_base_time(offload->base_time, + offload->cycle_time, + tas_data->earliest_base_time); + rbt -= tas_data->earliest_base_time; + /* UM10944.pdf 4.2.2. Schedule Entry Points table says that + * delta cannot be zero, which is shitty. Advance all relative + * base times by 1 TAS delta, so that even the earliest base + * time becomes 1 in relative terms. Then start the operational + * base time (PTPSCHTM) one TAS delta earlier than planned. + */ + entry_point_delta = ns_to_sja1105_delta(rbt) + 1; + + schedule_entry_points[cycle].subschindx = cycle; + schedule_entry_points[cycle].delta = entry_point_delta; + schedule_entry_points[cycle].address = schedule_start_idx; + + /* The subschedule end indices need to be + * monotonically increasing. + */ + for (i = cycle; i < 8; i++) + schedule_params->subscheind[i] = schedule_end_idx; + + for (i = 0; i < offload->num_entries; i++, k++) { + s64 delta_ns = offload->entries[i].interval; + + schedule[k].delta = ns_to_sja1105_delta(delta_ns); + schedule[k].destports = BIT(port); + schedule[k].resmedia_en = true; + schedule[k].resmedia = SJA1105_GATE_MASK & + ~offload->entries[i].gate_mask; + } + cycle++; + } + + if (!list_empty(&gating_cfg->entries)) { + struct sja1105_gate_entry *e; + + /* Relative base time */ + s64 rbt; + + schedule_start_idx = k; + schedule_end_idx = k + gating_cfg->num_entries - 1; + rbt = future_base_time(gating_cfg->base_time, + gating_cfg->cycle_time, + tas_data->earliest_base_time); + rbt -= tas_data->earliest_base_time; + entry_point_delta = ns_to_sja1105_delta(rbt) + 1; + + schedule_entry_points[cycle].subschindx = cycle; + schedule_entry_points[cycle].delta = entry_point_delta; + schedule_entry_points[cycle].address = schedule_start_idx; + + for (i = cycle; i < 8; i++) + schedule_params->subscheind[i] = schedule_end_idx; + + list_for_each_entry(e, &gating_cfg->entries, list) { + schedule[k].delta = ns_to_sja1105_delta(e->interval); + schedule[k].destports = e->rule->vl.destports; + schedule[k].setvalid = true; + schedule[k].txen = true; + schedule[k].vlindex = e->rule->vl.sharindx; + schedule[k].winstindex = e->rule->vl.sharindx; + if (e->gate_state) /* Gate open */ + schedule[k].winst = true; + else /* Gate closed */ + schedule[k].winend = true; + k++; + } + } + + return 0; +} + +/* Be there 2 port subschedules, each executing an arbitrary number of gate + * open/close events cyclically. + * None of those gate events must ever occur at the exact same time, otherwise + * the switch is known to act in exotically strange ways. + * However the hardware doesn't bother performing these integrity checks. + * So here we are with the task of validating whether the new @admin offload + * has any conflict with the already established TAS configuration in + * tas_data->offload. We already know the other ports are in harmony with one + * another, otherwise we wouldn't have saved them. + * Each gate event executes periodically, with a period of @cycle_time and a + * phase given by its cycle's @base_time plus its offset within the cycle + * (which in turn is given by the length of the events prior to it). + * There are two aspects to possible collisions: + * - Collisions within one cycle's (actually the longest cycle's) time frame. + * For that, we need to compare the cartesian product of each possible + * occurrence of each event within one cycle time. + * - Collisions in the future. Events may not collide within one cycle time, + * but if two port schedules don't have the same periodicity (aka the cycle + * times aren't multiples of one another), they surely will some time in the + * future (actually they will collide an infinite amount of times). + */ +static bool +sja1105_tas_check_conflicts(struct sja1105_private *priv, int port, + const struct tc_taprio_qopt_offload *admin) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + const struct tc_taprio_qopt_offload *offload; + s64 max_cycle_time, min_cycle_time; + s64 delta1, delta2; + s64 rbt1, rbt2; + s64 stop_time; + s64 t1, t2; + int i, j; + s32 rem; + + offload = tas_data->offload[port]; + if (!offload) + return false; + + /* Check if the two cycle times are multiples of one another. + * If they aren't, then they will surely collide. + */ + max_cycle_time = max(offload->cycle_time, admin->cycle_time); + min_cycle_time = min(offload->cycle_time, admin->cycle_time); + div_s64_rem(max_cycle_time, min_cycle_time, &rem); + if (rem) + return true; + + /* Calculate the "reduced" base time of each of the two cycles + * (transposed back as close to 0 as possible) by dividing to + * the cycle time. + */ + div_s64_rem(offload->base_time, offload->cycle_time, &rem); + rbt1 = rem; + + div_s64_rem(admin->base_time, admin->cycle_time, &rem); + rbt2 = rem; + + stop_time = max_cycle_time + max(rbt1, rbt2); + + /* delta1 is the relative base time of each GCL entry within + * the established ports' TAS config. + */ + for (i = 0, delta1 = 0; + i < offload->num_entries; + delta1 += offload->entries[i].interval, i++) { + /* delta2 is the relative base time of each GCL entry + * within the newly added TAS config. + */ + for (j = 0, delta2 = 0; + j < admin->num_entries; + delta2 += admin->entries[j].interval, j++) { + /* t1 follows all possible occurrences of the + * established ports' GCL entry i within the + * first cycle time. + */ + for (t1 = rbt1 + delta1; + t1 <= stop_time; + t1 += offload->cycle_time) { + /* t2 follows all possible occurrences + * of the newly added GCL entry j + * within the first cycle time. + */ + for (t2 = rbt2 + delta2; + t2 <= stop_time; + t2 += admin->cycle_time) { + if (t1 == t2) { + dev_warn(priv->ds->dev, + "GCL entry %d collides with entry %d of port %d\n", + j, i, port); + return true; + } + } + } + } + } + + return false; +} + +/* Check the tc-taprio configuration on @port for conflicts with the tc-gate + * global subschedule. If @port is -1, check it against all ports. + * To reuse the sja1105_tas_check_conflicts logic without refactoring it, + * convert the gating configuration to a dummy tc-taprio offload structure. + */ +bool sja1105_gating_check_conflicts(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack) +{ + struct sja1105_gating_config *gating_cfg = &priv->tas_data.gating_cfg; + size_t num_entries = gating_cfg->num_entries; + struct tc_taprio_qopt_offload *dummy; + struct dsa_switch *ds = priv->ds; + struct sja1105_gate_entry *e; + bool conflict; + int i = 0; + + if (list_empty(&gating_cfg->entries)) + return false; + + dummy = kzalloc(struct_size(dummy, entries, num_entries), GFP_KERNEL); + if (!dummy) { + NL_SET_ERR_MSG_MOD(extack, "Failed to allocate memory"); + return true; + } + + dummy->num_entries = num_entries; + dummy->base_time = gating_cfg->base_time; + dummy->cycle_time = gating_cfg->cycle_time; + + list_for_each_entry(e, &gating_cfg->entries, list) + dummy->entries[i++].interval = e->interval; + + if (port != -1) { + conflict = sja1105_tas_check_conflicts(priv, port, dummy); + } else { + for (port = 0; port < ds->num_ports; port++) { + conflict = sja1105_tas_check_conflicts(priv, port, + dummy); + if (conflict) + break; + } + } + + kfree(dummy); + + return conflict; +} + +int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port, + struct tc_taprio_qopt_offload *admin) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tas_data *tas_data = &priv->tas_data; + int other_port, rc, i; + + /* Can't change an already configured port (must delete qdisc first). + * Can't delete the qdisc from an unconfigured port. + */ + if ((!!tas_data->offload[port] && admin->cmd == TAPRIO_CMD_REPLACE) || + (!tas_data->offload[port] && admin->cmd == TAPRIO_CMD_DESTROY)) + return -EINVAL; + + if (admin->cmd == TAPRIO_CMD_DESTROY) { + taprio_offload_free(tas_data->offload[port]); + tas_data->offload[port] = NULL; + + rc = sja1105_init_scheduling(priv); + if (rc < 0) + return rc; + + return sja1105_static_config_reload(priv, SJA1105_SCHEDULING); + } else if (admin->cmd != TAPRIO_CMD_REPLACE) { + return -EOPNOTSUPP; + } + + /* The cycle time extension is the amount of time the last cycle from + * the old OPER needs to be extended in order to phase-align with the + * base time of the ADMIN when that becomes the new OPER. + * But of course our switch needs to be reset to switch-over between + * the ADMIN and the OPER configs - so much for a seamless transition. + * So don't add insult over injury and just say we don't support cycle + * time extension. + */ + if (admin->cycle_time_extension) + return -ENOTSUPP; + + for (i = 0; i < admin->num_entries; i++) { + s64 delta_ns = admin->entries[i].interval; + s64 delta_cycles = ns_to_sja1105_delta(delta_ns); + bool too_long, too_short; + + too_long = (delta_cycles >= SJA1105_TAS_MAX_DELTA); + too_short = (delta_cycles == 0); + if (too_long || too_short) { + dev_err(priv->ds->dev, + "Interval %llu too %s for GCL entry %d\n", + delta_ns, too_long ? "long" : "short", i); + return -ERANGE; + } + } + + for (other_port = 0; other_port < ds->num_ports; other_port++) { + if (other_port == port) + continue; + + if (sja1105_tas_check_conflicts(priv, other_port, admin)) + return -ERANGE; + } + + if (sja1105_gating_check_conflicts(priv, port, NULL)) { + dev_err(ds->dev, "Conflict with tc-gate schedule\n"); + return -ERANGE; + } + + tas_data->offload[port] = taprio_offload_get(admin); + + rc = sja1105_init_scheduling(priv); + if (rc < 0) + return rc; + + return sja1105_static_config_reload(priv, SJA1105_SCHEDULING); +} + +static int sja1105_tas_check_running(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct dsa_switch *ds = priv->ds; + struct sja1105_ptp_cmd cmd = {0}; + int rc; + + rc = sja1105_ptp_commit(ds, &cmd, SPI_READ); + if (rc < 0) + return rc; + + if (cmd.ptpstrtsch == 1) + /* Schedule successfully started */ + tas_data->state = SJA1105_TAS_STATE_RUNNING; + else if (cmd.ptpstopsch == 1) + /* Schedule is stopped */ + tas_data->state = SJA1105_TAS_STATE_DISABLED; + else + /* Schedule is probably not configured with PTP clock source */ + rc = -EINVAL; + + return rc; +} + +/* Write to PTPCLKCORP */ +static int sja1105_tas_adjust_drift(struct sja1105_private *priv, + u64 correction) +{ + const struct sja1105_regs *regs = priv->info->regs; + u32 ptpclkcorp = ns_to_sja1105_ticks(correction); + + return sja1105_xfer_u32(priv, SPI_WRITE, regs->ptpclkcorp, + &ptpclkcorp, NULL); +} + +/* Write to PTPSCHTM */ +static int sja1105_tas_set_base_time(struct sja1105_private *priv, + u64 base_time) +{ + const struct sja1105_regs *regs = priv->info->regs; + u64 ptpschtm = ns_to_sja1105_ticks(base_time); + + return sja1105_xfer_u64(priv, SPI_WRITE, regs->ptpschtm, + &ptpschtm, NULL); +} + +static int sja1105_tas_start(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct sja1105_ptp_cmd *cmd = &priv->ptp_data.cmd; + struct dsa_switch *ds = priv->ds; + int rc; + + dev_dbg(ds->dev, "Starting the TAS\n"); + + if (tas_data->state == SJA1105_TAS_STATE_ENABLED_NOT_RUNNING || + tas_data->state == SJA1105_TAS_STATE_RUNNING) { + dev_err(ds->dev, "TAS already started\n"); + return -EINVAL; + } + + cmd->ptpstrtsch = 1; + cmd->ptpstopsch = 0; + + rc = sja1105_ptp_commit(ds, cmd, SPI_WRITE); + if (rc < 0) + return rc; + + tas_data->state = SJA1105_TAS_STATE_ENABLED_NOT_RUNNING; + + return 0; +} + +static int sja1105_tas_stop(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct sja1105_ptp_cmd *cmd = &priv->ptp_data.cmd; + struct dsa_switch *ds = priv->ds; + int rc; + + dev_dbg(ds->dev, "Stopping the TAS\n"); + + if (tas_data->state == SJA1105_TAS_STATE_DISABLED) { + dev_err(ds->dev, "TAS already disabled\n"); + return -EINVAL; + } + + cmd->ptpstopsch = 1; + cmd->ptpstrtsch = 0; + + rc = sja1105_ptp_commit(ds, cmd, SPI_WRITE); + if (rc < 0) + return rc; + + tas_data->state = SJA1105_TAS_STATE_DISABLED; + + return 0; +} + +/* The schedule engine and the PTP clock are driven by the same oscillator, and + * they run in parallel. But whilst the PTP clock can keep an absolute + * time-of-day, the schedule engine is only running in 'ticks' (25 ticks make + * up a delta, which is 200ns), and wrapping around at the end of each cycle. + * The schedule engine is started when the PTP clock reaches the PTPSCHTM time + * (in PTP domain). + * Because the PTP clock can be rate-corrected (accelerated or slowed down) by + * a software servo, and the schedule engine clock runs in parallel to the PTP + * clock, there is logic internal to the switch that periodically keeps the + * schedule engine from drifting away. The frequency with which this internal + * syntonization happens is the PTP clock correction period (PTPCLKCORP). It is + * a value also in the PTP clock domain, and is also rate-corrected. + * To be precise, during a correction period, there is logic to determine by + * how many scheduler clock ticks has the PTP clock drifted. At the end of each + * correction period/beginning of new one, the length of a delta is shrunk or + * expanded with an integer number of ticks, compared with the typical 25. + * So a delta lasts for 200ns (or 25 ticks) only on average. + * Sometimes it is longer, sometimes it is shorter. The internal syntonization + * logic can adjust for at most 5 ticks each 20 ticks. + * + * The first implication is that you should choose your schedule correction + * period to be an integer multiple of the schedule length. Preferably one. + * In case there are schedules of multiple ports active, then the correction + * period needs to be a multiple of them all. Given the restriction that the + * cycle times have to be multiples of one another anyway, this means the + * correction period can simply be the largest cycle time, hence the current + * choice. This way, the updates are always synchronous to the transmission + * cycle, and therefore predictable. + * + * The second implication is that at the beginning of a correction period, the + * first few deltas will be modulated in time, until the schedule engine is + * properly phase-aligned with the PTP clock. For this reason, you should place + * your best-effort traffic at the beginning of a cycle, and your + * time-triggered traffic afterwards. + * + * The third implication is that once the schedule engine is started, it can + * only adjust for so much drift within a correction period. In the servo you + * can only change the PTPCLKRATE, but not step the clock (PTPCLKADD). If you + * want to do the latter, you need to stop and restart the schedule engine, + * which is what the state machine handles. + */ +static void sja1105_tas_state_machine(struct work_struct *work) +{ + struct sja1105_tas_data *tas_data = work_to_sja1105_tas(work); + struct sja1105_private *priv = tas_to_sja1105(tas_data); + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + struct timespec64 base_time_ts, now_ts; + struct dsa_switch *ds = priv->ds; + struct timespec64 diff; + s64 base_time, now; + int rc = 0; + + mutex_lock(&ptp_data->lock); + + switch (tas_data->state) { + case SJA1105_TAS_STATE_DISABLED: + /* Can't do anything at all if clock is still being stepped */ + if (tas_data->last_op != SJA1105_PTP_ADJUSTFREQ) + break; + + rc = sja1105_tas_adjust_drift(priv, tas_data->max_cycle_time); + if (rc < 0) + break; + + rc = __sja1105_ptp_gettimex(ds, &now, NULL); + if (rc < 0) + break; + + /* Plan to start the earliest schedule first. The others + * will be started in hardware, by way of their respective + * entry points delta. + * Try our best to avoid fringe cases (race condition between + * ptpschtm and ptpstrtsch) by pushing the oper_base_time at + * least one second in the future from now. This is not ideal, + * but this only needs to buy us time until the + * sja1105_tas_start command below gets executed. + */ + base_time = future_base_time(tas_data->earliest_base_time, + tas_data->max_cycle_time, + now + 1ull * NSEC_PER_SEC); + base_time -= sja1105_delta_to_ns(1); + + rc = sja1105_tas_set_base_time(priv, base_time); + if (rc < 0) + break; + + tas_data->oper_base_time = base_time; + + rc = sja1105_tas_start(priv); + if (rc < 0) + break; + + base_time_ts = ns_to_timespec64(base_time); + now_ts = ns_to_timespec64(now); + + dev_dbg(ds->dev, "OPER base time %lld.%09ld (now %lld.%09ld)\n", + base_time_ts.tv_sec, base_time_ts.tv_nsec, + now_ts.tv_sec, now_ts.tv_nsec); + + break; + + case SJA1105_TAS_STATE_ENABLED_NOT_RUNNING: + if (tas_data->last_op != SJA1105_PTP_ADJUSTFREQ) { + /* Clock was stepped.. bad news for TAS */ + sja1105_tas_stop(priv); + break; + } + + /* Check if TAS has actually started, by comparing the + * scheduled start time with the SJA1105 PTP clock + */ + rc = __sja1105_ptp_gettimex(ds, &now, NULL); + if (rc < 0) + break; + + if (now < tas_data->oper_base_time) { + /* TAS has not started yet */ + diff = ns_to_timespec64(tas_data->oper_base_time - now); + dev_dbg(ds->dev, "time to start: [%lld.%09ld]", + diff.tv_sec, diff.tv_nsec); + break; + } + + /* Time elapsed, what happened? */ + rc = sja1105_tas_check_running(priv); + if (rc < 0) + break; + + if (tas_data->state != SJA1105_TAS_STATE_RUNNING) + /* TAS has started */ + dev_err(ds->dev, + "TAS not started despite time elapsed\n"); + + break; + + case SJA1105_TAS_STATE_RUNNING: + /* Clock was stepped.. bad news for TAS */ + if (tas_data->last_op != SJA1105_PTP_ADJUSTFREQ) { + sja1105_tas_stop(priv); + break; + } + + rc = sja1105_tas_check_running(priv); + if (rc < 0) + break; + + if (tas_data->state != SJA1105_TAS_STATE_RUNNING) + dev_err(ds->dev, "TAS surprisingly stopped\n"); + + break; + + default: + if (net_ratelimit()) + dev_err(ds->dev, "TAS in an invalid state (incorrect use of API)!\n"); + } + + if (rc && net_ratelimit()) + dev_err(ds->dev, "An operation returned %d\n", rc); + + mutex_unlock(&ptp_data->lock); +} + +void sja1105_tas_clockstep(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tas_data *tas_data = &priv->tas_data; + + if (!tas_data->enabled) + return; + + tas_data->last_op = SJA1105_PTP_CLOCKSTEP; + schedule_work(&tas_data->tas_work); +} + +void sja1105_tas_adjfreq(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tas_data *tas_data = &priv->tas_data; + + if (!tas_data->enabled) + return; + + /* No reason to schedule the workqueue, nothing changed */ + if (tas_data->state == SJA1105_TAS_STATE_RUNNING) + return; + + tas_data->last_op = SJA1105_PTP_ADJUSTFREQ; + schedule_work(&tas_data->tas_work); +} + +void sja1105_tas_setup(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tas_data *tas_data = &priv->tas_data; + + INIT_WORK(&tas_data->tas_work, sja1105_tas_state_machine); + tas_data->state = SJA1105_TAS_STATE_DISABLED; + tas_data->last_op = SJA1105_PTP_NONE; + + INIT_LIST_HEAD(&tas_data->gating_cfg.entries); +} + +void sja1105_tas_teardown(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct tc_taprio_qopt_offload *offload; + int port; + + cancel_work_sync(&priv->tas_data.tas_work); + + for (port = 0; port < ds->num_ports; port++) { + offload = priv->tas_data.offload[port]; + if (!offload) + continue; + + taprio_offload_free(offload); + } +} diff --git a/drivers/net/dsa/sja1105/sja1105_tas.h b/drivers/net/dsa/sja1105/sja1105_tas.h new file mode 100644 index 0000000000..c05bd07e82 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_tas.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_TAS_H +#define _SJA1105_TAS_H + +#include <net/pkt_sched.h> + +#define SJA1105_TAS_MAX_DELTA BIT(18) + +struct sja1105_private; + +#if IS_ENABLED(CONFIG_NET_DSA_SJA1105_TAS) + +enum sja1105_tas_state { + SJA1105_TAS_STATE_DISABLED, + SJA1105_TAS_STATE_ENABLED_NOT_RUNNING, + SJA1105_TAS_STATE_RUNNING, +}; + +enum sja1105_ptp_op { + SJA1105_PTP_NONE, + SJA1105_PTP_CLOCKSTEP, + SJA1105_PTP_ADJUSTFREQ, +}; + +struct sja1105_gate_entry { + struct list_head list; + struct sja1105_rule *rule; + s64 interval; + u8 gate_state; +}; + +struct sja1105_gating_config { + u64 cycle_time; + s64 base_time; + int num_entries; + struct list_head entries; +}; + +struct sja1105_tas_data { + struct tc_taprio_qopt_offload *offload[SJA1105_MAX_NUM_PORTS]; + struct sja1105_gating_config gating_cfg; + enum sja1105_tas_state state; + enum sja1105_ptp_op last_op; + struct work_struct tas_work; + s64 earliest_base_time; + s64 oper_base_time; + u64 max_cycle_time; + bool enabled; +}; + +int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port, + struct tc_taprio_qopt_offload *admin); + +void sja1105_tas_setup(struct dsa_switch *ds); + +void sja1105_tas_teardown(struct dsa_switch *ds); + +void sja1105_tas_clockstep(struct dsa_switch *ds); + +void sja1105_tas_adjfreq(struct dsa_switch *ds); + +bool sja1105_gating_check_conflicts(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack); + +int sja1105_init_scheduling(struct sja1105_private *priv); + +#else + +/* C doesn't allow empty structures, bah! */ +struct sja1105_tas_data { + u8 dummy; +}; + +static inline int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port, + struct tc_taprio_qopt_offload *admin) +{ + return -EOPNOTSUPP; +} + +static inline void sja1105_tas_setup(struct dsa_switch *ds) { } + +static inline void sja1105_tas_teardown(struct dsa_switch *ds) { } + +static inline void sja1105_tas_clockstep(struct dsa_switch *ds) { } + +static inline void sja1105_tas_adjfreq(struct dsa_switch *ds) { } + +static inline bool +sja1105_gating_check_conflicts(struct dsa_switch *ds, int port, + struct netlink_ext_ack *extack) +{ + return true; +} + +static inline int sja1105_init_scheduling(struct sja1105_private *priv) +{ + return 0; +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_TAS) */ + +#endif /* _SJA1105_TAS_H */ diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c new file mode 100644 index 0000000000..b7e95d60a6 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -0,0 +1,802 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2020 NXP + */ +#include <net/tc_act/tc_gate.h> +#include <linux/dsa/8021q.h> +#include "sja1105_vl.h" + +#define SJA1105_SIZE_VL_STATUS 8 + +/* Insert into the global gate list, sorted by gate action time. */ +static int sja1105_insert_gate_entry(struct sja1105_gating_config *gating_cfg, + struct sja1105_rule *rule, + u8 gate_state, s64 entry_time, + struct netlink_ext_ack *extack) +{ + struct sja1105_gate_entry *e; + int rc; + + e = kzalloc(sizeof(*e), GFP_KERNEL); + if (!e) + return -ENOMEM; + + e->rule = rule; + e->gate_state = gate_state; + e->interval = entry_time; + + if (list_empty(&gating_cfg->entries)) { + list_add(&e->list, &gating_cfg->entries); + } else { + struct sja1105_gate_entry *p; + + list_for_each_entry(p, &gating_cfg->entries, list) { + if (p->interval == e->interval) { + NL_SET_ERR_MSG_MOD(extack, + "Gate conflict"); + rc = -EBUSY; + goto err; + } + + if (e->interval < p->interval) + break; + } + list_add(&e->list, p->list.prev); + } + + gating_cfg->num_entries++; + + return 0; +err: + kfree(e); + return rc; +} + +/* The gate entries contain absolute times in their e->interval field. Convert + * that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5"). + */ +static void +sja1105_gating_cfg_time_to_interval(struct sja1105_gating_config *gating_cfg, + u64 cycle_time) +{ + struct sja1105_gate_entry *last_e; + struct sja1105_gate_entry *e; + struct list_head *prev; + + list_for_each_entry(e, &gating_cfg->entries, list) { + struct sja1105_gate_entry *p; + + prev = e->list.prev; + + if (prev == &gating_cfg->entries) + continue; + + p = list_entry(prev, struct sja1105_gate_entry, list); + p->interval = e->interval - p->interval; + } + last_e = list_last_entry(&gating_cfg->entries, + struct sja1105_gate_entry, list); + last_e->interval = cycle_time - last_e->interval; +} + +static void sja1105_free_gating_config(struct sja1105_gating_config *gating_cfg) +{ + struct sja1105_gate_entry *e, *n; + + list_for_each_entry_safe(e, n, &gating_cfg->entries, list) { + list_del(&e->list); + kfree(e); + } +} + +static int sja1105_compose_gating_subschedule(struct sja1105_private *priv, + struct netlink_ext_ack *extack) +{ + struct sja1105_gating_config *gating_cfg = &priv->tas_data.gating_cfg; + struct sja1105_rule *rule; + s64 max_cycle_time = 0; + s64 its_base_time = 0; + int i, rc = 0; + + sja1105_free_gating_config(gating_cfg); + + list_for_each_entry(rule, &priv->flow_block.rules, list) { + if (rule->type != SJA1105_RULE_VL) + continue; + if (rule->vl.type != SJA1105_VL_TIME_TRIGGERED) + continue; + + if (max_cycle_time < rule->vl.cycle_time) { + max_cycle_time = rule->vl.cycle_time; + its_base_time = rule->vl.base_time; + } + } + + if (!max_cycle_time) + return 0; + + dev_dbg(priv->ds->dev, "max_cycle_time %lld its_base_time %lld\n", + max_cycle_time, its_base_time); + + gating_cfg->base_time = its_base_time; + gating_cfg->cycle_time = max_cycle_time; + gating_cfg->num_entries = 0; + + list_for_each_entry(rule, &priv->flow_block.rules, list) { + s64 time; + s64 rbt; + + if (rule->type != SJA1105_RULE_VL) + continue; + if (rule->vl.type != SJA1105_VL_TIME_TRIGGERED) + continue; + + /* Calculate the difference between this gating schedule's + * base time, and the base time of the gating schedule with the + * longest cycle time. We call it the relative base time (rbt). + */ + rbt = future_base_time(rule->vl.base_time, rule->vl.cycle_time, + its_base_time); + rbt -= its_base_time; + + time = rbt; + + for (i = 0; i < rule->vl.num_entries; i++) { + u8 gate_state = rule->vl.entries[i].gate_state; + s64 entry_time = time; + + while (entry_time < max_cycle_time) { + rc = sja1105_insert_gate_entry(gating_cfg, rule, + gate_state, + entry_time, + extack); + if (rc) + goto err; + + entry_time += rule->vl.cycle_time; + } + time += rule->vl.entries[i].interval; + } + } + + sja1105_gating_cfg_time_to_interval(gating_cfg, max_cycle_time); + + return 0; +err: + sja1105_free_gating_config(gating_cfg); + return rc; +} + +/* The switch flow classification core implements TTEthernet, which 'thinks' in + * terms of Virtual Links (VL), a concept borrowed from ARINC 664 part 7. + * However it also has one other operating mode (VLLUPFORMAT=0) where it acts + * somewhat closer to a pre-standard implementation of IEEE 802.1Qci + * (Per-Stream Filtering and Policing), which is what the driver is going to be + * implementing. + * + * VL Lookup + * Key = {DMAC && VLANID +---------+ Key = { (DMAC[47:16] & VLMASK == + * && VLAN PCP | | VLMARKER) + * && INGRESS PORT} +---------+ (both fixed) + * (exact match, | && DMAC[15:0] == VLID + * all specified in rule) | (specified in rule) + * v && INGRESS PORT } + * ------------ + * 0 (PSFP) / \ 1 (ARINC664) + * +-----------/ VLLUPFORMAT \----------+ + * | \ (fixed) / | + * | \ / | + * 0 (forwarding) v ------------ | + * ------------ | + * / \ 1 (QoS classification) | + * +---/ ISCRITICAL \-----------+ | + * | \ (per rule) / | | + * | \ / VLID taken from VLID taken from + * v ------------ index of rule contents of rule + * select that matched that matched + * DESTPORTS | | + * | +---------+--------+ + * | | + * | v + * | VL Forwarding + * | (indexed by VLID) + * | +---------+ + * | +--------------| | + * | | select TYPE +---------+ + * | v + * | 0 (rate ------------ 1 (time + * | constrained) / \ triggered) + * | +------/ TYPE \------------+ + * | | \ (per VLID) / | + * | v \ / v + * | VL Policing ------------ VL Policing + * | (indexed by VLID) (indexed by VLID) + * | +---------+ +---------+ + * | | TYPE=0 | | TYPE=1 | + * | +---------+ +---------+ + * | select SHARINDX select SHARINDX to + * | to rate-limit re-enter VL Forwarding + * | groups of VL's with new VLID for egress + * | to same quota | + * | | | + * | select MAXLEN -> exceed => drop select MAXLEN -> exceed => drop + * | | | + * | v v + * | VL Forwarding VL Forwarding + * | (indexed by SHARINDX) (indexed by SHARINDX) + * | +---------+ +---------+ + * | | TYPE=0 | | TYPE=1 | + * | +---------+ +---------+ + * | select PRIORITY, select PRIORITY, + * | PARTITION, DESTPORTS PARTITION, DESTPORTS + * | | | + * | v v + * | VL Policing VL Policing + * | (indexed by SHARINDX) (indexed by SHARINDX) + * | +---------+ +---------+ + * | | TYPE=0 | | TYPE=1 | + * | +---------+ +---------+ + * | | | + * | v | + * | select BAG, -> exceed => drop | + * | JITTER v + * | | ---------------------------------------------- + * | | / Reception Window is open for this VL \ + * | | / (the Schedule Table executes an entry i \ + * | | / M <= i < N, for which these conditions hold): \ no + * | | +----/ \-+ + * | | |yes \ WINST[M] == 1 && WINSTINDEX[M] == VLID / | + * | | | \ WINEND[N] == 1 && WINSTINDEX[N] == VLID / | + * | | | \ / | + * | | | \ (the VL window has opened and not yet closed)/ | + * | | | ---------------------------------------------- | + * | | v v + * | | dispatch to DESTPORTS when the Schedule Table drop + * | | executes an entry i with TXEN == 1 && VLINDEX == i + * v v + * dispatch immediately to DESTPORTS + * + * The per-port classification key is always composed of {DMAC, VID, PCP} and + * is non-maskable. This 'looks like' the NULL stream identification function + * from IEEE 802.1CB clause 6, except for the extra VLAN PCP. When the switch + * ports operate as VLAN-unaware, we do allow the user to not specify the VLAN + * ID and PCP, and then the port-based defaults will be used. + * + * In TTEthernet, routing is something that needs to be done manually for each + * Virtual Link. So the flow action must always include one of: + * a. 'redirect', 'trap' or 'drop': select the egress port list + * Additionally, the following actions may be applied on a Virtual Link, + * turning it into 'critical' traffic: + * b. 'police': turn it into a rate-constrained VL, with bandwidth limitation + * given by the maximum frame length, bandwidth allocation gap (BAG) and + * maximum jitter. + * c. 'gate': turn it into a time-triggered VL, which can be only be received + * and forwarded according to a given schedule. + */ + +static bool sja1105_vl_key_lower(struct sja1105_vl_lookup_entry *a, + struct sja1105_vl_lookup_entry *b) +{ + if (a->macaddr < b->macaddr) + return true; + if (a->macaddr > b->macaddr) + return false; + if (a->vlanid < b->vlanid) + return true; + if (a->vlanid > b->vlanid) + return false; + if (a->port < b->port) + return true; + if (a->port > b->port) + return false; + if (a->vlanprior < b->vlanprior) + return true; + if (a->vlanprior > b->vlanprior) + return false; + /* Keys are equal */ + return false; +} + +/* FIXME: this should change when the bridge upper of the port changes. */ +static u16 sja1105_port_get_tag_8021q_vid(struct dsa_port *dp) +{ + unsigned long bridge_num; + + if (!dp->bridge) + return dsa_tag_8021q_standalone_vid(dp); + + bridge_num = dsa_port_bridge_num_get(dp); + + return dsa_tag_8021q_bridge_vid(bridge_num); +} + +static int sja1105_init_virtual_links(struct sja1105_private *priv, + struct netlink_ext_ack *extack) +{ + struct sja1105_vl_policing_entry *vl_policing; + struct sja1105_vl_forwarding_entry *vl_fwd; + struct sja1105_vl_lookup_entry *vl_lookup; + bool have_critical_virtual_links = false; + struct sja1105_table *table; + struct sja1105_rule *rule; + int num_virtual_links = 0; + int max_sharindx = 0; + int i, j, k; + + /* Figure out the dimensioning of the problem */ + list_for_each_entry(rule, &priv->flow_block.rules, list) { + if (rule->type != SJA1105_RULE_VL) + continue; + /* Each VL lookup entry matches on a single ingress port */ + num_virtual_links += hweight_long(rule->port_mask); + + if (rule->vl.type != SJA1105_VL_NONCRITICAL) + have_critical_virtual_links = true; + if (max_sharindx < rule->vl.sharindx) + max_sharindx = rule->vl.sharindx; + } + + if (num_virtual_links > SJA1105_MAX_VL_LOOKUP_COUNT) { + NL_SET_ERR_MSG_MOD(extack, "Not enough VL entries available"); + return -ENOSPC; + } + + if (max_sharindx + 1 > SJA1105_MAX_VL_LOOKUP_COUNT) { + NL_SET_ERR_MSG_MOD(extack, "Policer index out of range"); + return -ENOSPC; + } + + max_sharindx = max_t(int, num_virtual_links, max_sharindx) + 1; + + /* Discard previous VL Lookup Table */ + table = &priv->static_config.tables[BLK_IDX_VL_LOOKUP]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Discard previous VL Policing Table */ + table = &priv->static_config.tables[BLK_IDX_VL_POLICING]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Discard previous VL Forwarding Table */ + table = &priv->static_config.tables[BLK_IDX_VL_FORWARDING]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Discard previous VL Forwarding Parameters Table */ + table = &priv->static_config.tables[BLK_IDX_VL_FORWARDING_PARAMS]; + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Nothing to do */ + if (!num_virtual_links) + return 0; + + /* Pre-allocate space in the static config tables */ + + /* VL Lookup Table */ + table = &priv->static_config.tables[BLK_IDX_VL_LOOKUP]; + table->entries = kcalloc(num_virtual_links, + table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + table->entry_count = num_virtual_links; + vl_lookup = table->entries; + + k = 0; + + list_for_each_entry(rule, &priv->flow_block.rules, list) { + unsigned long port; + + if (rule->type != SJA1105_RULE_VL) + continue; + + for_each_set_bit(port, &rule->port_mask, SJA1105_MAX_NUM_PORTS) { + vl_lookup[k].format = SJA1105_VL_FORMAT_PSFP; + vl_lookup[k].port = port; + vl_lookup[k].macaddr = rule->key.vl.dmac; + if (rule->key.type == SJA1105_KEY_VLAN_AWARE_VL) { + vl_lookup[k].vlanid = rule->key.vl.vid; + vl_lookup[k].vlanprior = rule->key.vl.pcp; + } else { + /* FIXME */ + struct dsa_port *dp = dsa_to_port(priv->ds, port); + u16 vid = sja1105_port_get_tag_8021q_vid(dp); + + vl_lookup[k].vlanid = vid; + vl_lookup[k].vlanprior = 0; + } + /* For critical VLs, the DESTPORTS mask is taken from + * the VL Forwarding Table, so no point in putting it + * in the VL Lookup Table + */ + if (rule->vl.type == SJA1105_VL_NONCRITICAL) + vl_lookup[k].destports = rule->vl.destports; + else + vl_lookup[k].iscritical = true; + vl_lookup[k].flow_cookie = rule->cookie; + k++; + } + } + + /* UM10944.pdf chapter 4.2.3 VL Lookup table: + * "the entries in the VL Lookup table must be sorted in ascending + * order (i.e. the smallest value must be loaded first) according to + * the following sort order: MACADDR, VLANID, PORT, VLANPRIOR." + */ + for (i = 0; i < num_virtual_links; i++) { + struct sja1105_vl_lookup_entry *a = &vl_lookup[i]; + + for (j = i + 1; j < num_virtual_links; j++) { + struct sja1105_vl_lookup_entry *b = &vl_lookup[j]; + + if (sja1105_vl_key_lower(b, a)) { + struct sja1105_vl_lookup_entry tmp = *a; + + *a = *b; + *b = tmp; + } + } + } + + if (!have_critical_virtual_links) + return 0; + + /* VL Policing Table */ + table = &priv->static_config.tables[BLK_IDX_VL_POLICING]; + table->entries = kcalloc(max_sharindx, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + table->entry_count = max_sharindx; + vl_policing = table->entries; + + /* VL Forwarding Table */ + table = &priv->static_config.tables[BLK_IDX_VL_FORWARDING]; + table->entries = kcalloc(max_sharindx, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + table->entry_count = max_sharindx; + vl_fwd = table->entries; + + /* VL Forwarding Parameters Table */ + table = &priv->static_config.tables[BLK_IDX_VL_FORWARDING_PARAMS]; + table->entries = kcalloc(1, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + table->entry_count = 1; + + for (i = 0; i < num_virtual_links; i++) { + unsigned long cookie = vl_lookup[i].flow_cookie; + struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); + + if (rule->vl.type == SJA1105_VL_NONCRITICAL) + continue; + if (rule->vl.type == SJA1105_VL_TIME_TRIGGERED) { + int sharindx = rule->vl.sharindx; + + vl_policing[i].type = 1; + vl_policing[i].sharindx = sharindx; + vl_policing[i].maxlen = rule->vl.maxlen; + vl_policing[sharindx].type = 1; + + vl_fwd[i].type = 1; + vl_fwd[sharindx].type = 1; + vl_fwd[sharindx].priority = rule->vl.ipv; + vl_fwd[sharindx].partition = 0; + vl_fwd[sharindx].destports = rule->vl.destports; + } + } + + sja1105_frame_memory_partitioning(priv); + + return 0; +} + +int sja1105_vl_redirect(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack, unsigned long cookie, + struct sja1105_key *key, unsigned long destports, + bool append) +{ + struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); + struct dsa_port *dp = dsa_to_port(priv->ds, port); + bool vlan_aware = dsa_port_is_vlan_filtering(dp); + int rc; + + if (!vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { + NL_SET_ERR_MSG_MOD(extack, + "Can only redirect based on DMAC"); + return -EOPNOTSUPP; + } else if (vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { + NL_SET_ERR_MSG_MOD(extack, + "Can only redirect based on {DMAC, VID, PCP}"); + return -EOPNOTSUPP; + } + + if (!rule) { + rule = kzalloc(sizeof(*rule), GFP_KERNEL); + if (!rule) + return -ENOMEM; + + rule->cookie = cookie; + rule->type = SJA1105_RULE_VL; + rule->key = *key; + list_add(&rule->list, &priv->flow_block.rules); + } + + rule->port_mask |= BIT(port); + if (append) + rule->vl.destports |= destports; + else + rule->vl.destports = destports; + + rc = sja1105_init_virtual_links(priv, extack); + if (rc) { + rule->port_mask &= ~BIT(port); + if (!rule->port_mask) { + list_del(&rule->list); + kfree(rule); + } + } + + return rc; +} + +int sja1105_vl_delete(struct sja1105_private *priv, int port, + struct sja1105_rule *rule, struct netlink_ext_ack *extack) +{ + int rc; + + rule->port_mask &= ~BIT(port); + if (!rule->port_mask) { + list_del(&rule->list); + kfree(rule); + } + + rc = sja1105_compose_gating_subschedule(priv, extack); + if (rc) + return rc; + + rc = sja1105_init_virtual_links(priv, extack); + if (rc) + return rc; + + rc = sja1105_init_scheduling(priv); + if (rc < 0) + return rc; + + return sja1105_static_config_reload(priv, SJA1105_VIRTUAL_LINKS); +} + +int sja1105_vl_gate(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack, unsigned long cookie, + struct sja1105_key *key, u32 index, s32 prio, + u64 base_time, u64 cycle_time, u64 cycle_time_ext, + u32 num_entries, struct action_gate_entry *entries) +{ + struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); + struct dsa_port *dp = dsa_to_port(priv->ds, port); + bool vlan_aware = dsa_port_is_vlan_filtering(dp); + int ipv = -1; + int i, rc; + s32 rem; + + if (cycle_time_ext) { + NL_SET_ERR_MSG_MOD(extack, + "Cycle time extension not supported"); + return -EOPNOTSUPP; + } + + div_s64_rem(base_time, sja1105_delta_to_ns(1), &rem); + if (rem) { + NL_SET_ERR_MSG_MOD(extack, + "Base time must be multiple of 200 ns"); + return -ERANGE; + } + + div_s64_rem(cycle_time, sja1105_delta_to_ns(1), &rem); + if (rem) { + NL_SET_ERR_MSG_MOD(extack, + "Cycle time must be multiple of 200 ns"); + return -ERANGE; + } + + if (!vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { + NL_SET_ERR_MSG_MOD(extack, + "Can only gate based on DMAC"); + return -EOPNOTSUPP; + } else if (vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { + NL_SET_ERR_MSG_MOD(extack, + "Can only gate based on {DMAC, VID, PCP}"); + return -EOPNOTSUPP; + } + + if (!rule) { + rule = kzalloc(sizeof(*rule), GFP_KERNEL); + if (!rule) + return -ENOMEM; + + list_add(&rule->list, &priv->flow_block.rules); + rule->cookie = cookie; + rule->type = SJA1105_RULE_VL; + rule->key = *key; + rule->vl.type = SJA1105_VL_TIME_TRIGGERED; + rule->vl.sharindx = index; + rule->vl.base_time = base_time; + rule->vl.cycle_time = cycle_time; + rule->vl.num_entries = num_entries; + rule->vl.entries = kcalloc(num_entries, + sizeof(struct action_gate_entry), + GFP_KERNEL); + if (!rule->vl.entries) { + rc = -ENOMEM; + goto out; + } + + for (i = 0; i < num_entries; i++) { + div_s64_rem(entries[i].interval, + sja1105_delta_to_ns(1), &rem); + if (rem) { + NL_SET_ERR_MSG_MOD(extack, + "Interval must be multiple of 200 ns"); + rc = -ERANGE; + goto out; + } + + if (!entries[i].interval) { + NL_SET_ERR_MSG_MOD(extack, + "Interval cannot be zero"); + rc = -ERANGE; + goto out; + } + + if (ns_to_sja1105_delta(entries[i].interval) > + SJA1105_TAS_MAX_DELTA) { + NL_SET_ERR_MSG_MOD(extack, + "Maximum interval is 52 ms"); + rc = -ERANGE; + goto out; + } + + if (entries[i].maxoctets != -1) { + NL_SET_ERR_MSG_MOD(extack, + "Cannot offload IntervalOctetMax"); + rc = -EOPNOTSUPP; + goto out; + } + + if (ipv == -1) { + ipv = entries[i].ipv; + } else if (ipv != entries[i].ipv) { + NL_SET_ERR_MSG_MOD(extack, + "Only support a single IPV per VL"); + rc = -EOPNOTSUPP; + goto out; + } + + rule->vl.entries[i] = entries[i]; + } + + if (ipv == -1) { + if (key->type == SJA1105_KEY_VLAN_AWARE_VL) + ipv = key->vl.pcp; + else + ipv = 0; + } + + /* TODO: support per-flow MTU */ + rule->vl.maxlen = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; + rule->vl.ipv = ipv; + } + + rule->port_mask |= BIT(port); + + rc = sja1105_compose_gating_subschedule(priv, extack); + if (rc) + goto out; + + rc = sja1105_init_virtual_links(priv, extack); + if (rc) + goto out; + + if (sja1105_gating_check_conflicts(priv, -1, extack)) { + NL_SET_ERR_MSG_MOD(extack, "Conflict with tc-taprio schedule"); + rc = -ERANGE; + goto out; + } + +out: + if (rc) { + rule->port_mask &= ~BIT(port); + if (!rule->port_mask) { + list_del(&rule->list); + kfree(rule->vl.entries); + kfree(rule); + } + } + + return rc; +} + +static int sja1105_find_vlid(struct sja1105_private *priv, int port, + struct sja1105_key *key) +{ + struct sja1105_vl_lookup_entry *vl_lookup; + struct sja1105_table *table; + int i; + + if (WARN_ON(key->type != SJA1105_KEY_VLAN_AWARE_VL && + key->type != SJA1105_KEY_VLAN_UNAWARE_VL)) + return -1; + + table = &priv->static_config.tables[BLK_IDX_VL_LOOKUP]; + vl_lookup = table->entries; + + for (i = 0; i < table->entry_count; i++) { + if (key->type == SJA1105_KEY_VLAN_AWARE_VL) { + if (vl_lookup[i].port == port && + vl_lookup[i].macaddr == key->vl.dmac && + vl_lookup[i].vlanid == key->vl.vid && + vl_lookup[i].vlanprior == key->vl.pcp) + return i; + } else { + if (vl_lookup[i].port == port && + vl_lookup[i].macaddr == key->vl.dmac) + return i; + } + } + + return -1; +} + +int sja1105_vl_stats(struct sja1105_private *priv, int port, + struct sja1105_rule *rule, struct flow_stats *stats, + struct netlink_ext_ack *extack) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 buf[SJA1105_SIZE_VL_STATUS] = {0}; + u64 unreleased; + u64 timingerr; + u64 lengtherr; + int vlid, rc; + u64 pkts; + + if (rule->vl.type != SJA1105_VL_TIME_TRIGGERED) + return 0; + + vlid = sja1105_find_vlid(priv, port, &rule->key); + if (vlid < 0) + return 0; + + rc = sja1105_xfer_buf(priv, SPI_READ, regs->vl_status + 2 * vlid, buf, + SJA1105_SIZE_VL_STATUS); + if (rc) { + NL_SET_ERR_MSG_MOD(extack, "SPI access failed"); + return rc; + } + + sja1105_unpack(buf, &timingerr, 31, 16, SJA1105_SIZE_VL_STATUS); + sja1105_unpack(buf, &unreleased, 15, 0, SJA1105_SIZE_VL_STATUS); + sja1105_unpack(buf, &lengtherr, 47, 32, SJA1105_SIZE_VL_STATUS); + + pkts = timingerr + unreleased + lengtherr; + + flow_stats_update(stats, 0, pkts - rule->vl.stats.pkts, 0, + jiffies - rule->vl.stats.lastused, + FLOW_ACTION_HW_STATS_IMMEDIATE); + + rule->vl.stats.pkts = pkts; + rule->vl.stats.lastused = jiffies; + + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_vl.h b/drivers/net/dsa/sja1105/sja1105_vl.h new file mode 100644 index 0000000000..51fba0dce9 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_vl.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright 2020 NXP + */ +#ifndef _SJA1105_VL_H +#define _SJA1105_VL_H + +#include "sja1105.h" + +#if IS_ENABLED(CONFIG_NET_DSA_SJA1105_VL) + +int sja1105_vl_redirect(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack, unsigned long cookie, + struct sja1105_key *key, unsigned long destports, + bool append); + +int sja1105_vl_delete(struct sja1105_private *priv, int port, + struct sja1105_rule *rule, + struct netlink_ext_ack *extack); + +int sja1105_vl_gate(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack, unsigned long cookie, + struct sja1105_key *key, u32 index, s32 prio, + u64 base_time, u64 cycle_time, u64 cycle_time_ext, + u32 num_entries, struct action_gate_entry *entries); + +int sja1105_vl_stats(struct sja1105_private *priv, int port, + struct sja1105_rule *rule, struct flow_stats *stats, + struct netlink_ext_ack *extack); + +#else + +static inline int sja1105_vl_redirect(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack, + unsigned long cookie, + struct sja1105_key *key, + unsigned long destports, + bool append) +{ + NL_SET_ERR_MSG_MOD(extack, "Virtual Links not compiled in"); + return -EOPNOTSUPP; +} + +static inline int sja1105_vl_delete(struct sja1105_private *priv, + int port, struct sja1105_rule *rule, + struct netlink_ext_ack *extack) +{ + NL_SET_ERR_MSG_MOD(extack, "Virtual Links not compiled in"); + return -EOPNOTSUPP; +} + +static inline int sja1105_vl_gate(struct sja1105_private *priv, int port, + struct netlink_ext_ack *extack, + unsigned long cookie, + struct sja1105_key *key, u32 index, s32 prio, + u64 base_time, u64 cycle_time, + u64 cycle_time_ext, u32 num_entries, + struct action_gate_entry *entries) +{ + NL_SET_ERR_MSG_MOD(extack, "Virtual Links not compiled in"); + return -EOPNOTSUPP; +} + +static inline int sja1105_vl_stats(struct sja1105_private *priv, int port, + struct sja1105_rule *rule, + struct flow_stats *stats, + struct netlink_ext_ack *extack) +{ + NL_SET_ERR_MSG_MOD(extack, "Virtual Links not compiled in"); + return -EOPNOTSUPP; +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_VL) */ + +#endif /* _SJA1105_VL_H */ |