diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:30 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:30 +0000 |
commit | e54def4ad8144ab15f826416e2e0f290ef1901b4 (patch) | |
tree | 583f8d4bd95cd67c44ff37b878a7eddfca9ab97a /drivers/net/dsa | |
parent | Adding upstream version 6.8.12. (diff) | |
download | linux-e54def4ad8144ab15f826416e2e0f290ef1901b4.tar.xz linux-e54def4ad8144ab15f826416e2e0f290ef1901b4.zip |
Adding upstream version 6.9.2.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/dsa')
35 files changed, 1423 insertions, 1259 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index f8c1d73b25..3092b39103 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -48,7 +48,7 @@ config NET_DSA_MT7530 config NET_DSA_MT7530_MDIO tristate "MediaTek MT7530 MDIO interface driver" depends on NET_DSA_MT7530 - imply MEDIATEK_GE_PHY + select MEDIATEK_GE_PHY select PCS_MTK_LYNXI help This enables support for the MediaTek MT7530 and MT7531 switch diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 0d628b35fd..b2eeff04f4 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -559,6 +559,19 @@ static void b53_port_set_learning(struct b53_device *dev, int port, b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg); } +static void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) +{ + struct b53_device *dev = ds->priv; + u16 reg; + + b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®); + if (enable) + reg |= BIT(port); + else + reg &= ~BIT(port); + b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); +} + int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) { struct b53_device *dev = ds->priv; @@ -1257,7 +1270,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phydev) { struct b53_device *dev = ds->priv; - struct ethtool_eee *p = &dev->ports[port].eee; + struct ethtool_keee *p = &dev->ports[port].eee; u8 rgmii_ctrl = 0, reg = 0, off; bool tx_pause = false; bool rx_pause = false; @@ -2193,21 +2206,6 @@ void b53_mirror_del(struct dsa_switch *ds, int port, } EXPORT_SYMBOL(b53_mirror_del); -void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) -{ - struct b53_device *dev = ds->priv; - u16 reg; - - b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®); - if (enable) - reg |= BIT(port); - else - reg &= ~BIT(port); - b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); -} -EXPORT_SYMBOL(b53_eee_enable_set); - - /* Returns 0 if EEE was not enabled, or 1 otherwise */ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) @@ -2224,27 +2222,21 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) } EXPORT_SYMBOL(b53_eee_init); -int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) +int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { struct b53_device *dev = ds->priv; - struct ethtool_eee *p = &dev->ports[port].eee; - u16 reg; if (is5325(dev) || is5365(dev)) return -EOPNOTSUPP; - b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®); - e->eee_enabled = p->eee_enabled; - e->eee_active = !!(reg & BIT(port)); - return 0; } EXPORT_SYMBOL(b53_get_mac_eee); -int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) +int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { struct b53_device *dev = ds->priv; - struct ethtool_eee *p = &dev->ports[port].eee; + struct ethtool_keee *p = &dev->ports[port].eee; if (is5325(dev) || is5365(dev)) return -EOPNOTSUPP; diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h index fdcfd5081c..c13a907947 100644 --- a/drivers/net/dsa/b53/b53_priv.h +++ b/drivers/net/dsa/b53/b53_priv.h @@ -95,7 +95,7 @@ struct b53_pcs { struct b53_port { u16 vlan_ctl_mask; - struct ethtool_eee eee; + struct ethtool_keee eee; }; struct b53_vlan { @@ -395,9 +395,8 @@ void b53_mirror_del(struct dsa_switch *ds, int port, int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy); void b53_disable_port(struct dsa_switch *ds, int port); void b53_brcm_hdr_setup(struct dsa_switch *ds, int port); -void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable); int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy); -int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e); -int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e); +int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e); +int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e); #endif diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 4a52ccbe39..bc77ee9e6d 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -835,7 +835,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port, bool tx_pause, bool rx_pause) { struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - struct ethtool_eee *p = &priv->dev->ports[port].eee; + struct ethtool_keee *p = &priv->dev->ports[port].eee; u32 reg_rgmii_ctrl = 0; u32 reg, offset; diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index c3da97abce..14923535ca 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -633,6 +633,57 @@ static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) } /** + * ksz879x_get_loopback - KSZ879x specific function to get loopback + * configuration status for a specific port + * @dev: Pointer to the device structure + * @port: Port number to query + * @val: Pointer to store the result + * + * This function reads the SMI registers to determine whether loopback mode + * is enabled for a specific port. + * + * Return: 0 on success, error code on failure. + */ +static int ksz879x_get_loopback(struct ksz_device *dev, u16 port, + u16 *val) +{ + u8 stat3; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_STATUS_3, &stat3); + if (ret) + return ret; + + if (stat3 & PORT_PHY_LOOPBACK) + *val |= BMCR_LOOPBACK; + + return 0; +} + +/** + * ksz879x_set_loopback - KSZ879x specific function to set loopback mode for + * a specific port + * @dev: Pointer to the device structure. + * @port: Port number to modify. + * @val: Value indicating whether to enable or disable loopback mode. + * + * This function translates loopback bit of the BMCR register into the + * corresponding hardware register bit value and writes it to the SMI interface. + * + * Return: 0 on success, error code on failure. + */ +static int ksz879x_set_loopback(struct ksz_device *dev, u16 port, u16 val) +{ + u8 stat3 = 0; + + if (val & BMCR_LOOPBACK) + stat3 |= PORT_PHY_LOOPBACK; + + return ksz_prmw8(dev, port, REG_PORT_STATUS_3, PORT_PHY_LOOPBACK, + stat3); +} + +/** * ksz8_r_phy_ctrl - Translates and reads from the SMI interface to a MIIM PHY * Control register (Reg. 31). * @dev: The KSZ device instance. @@ -676,59 +727,122 @@ static int ksz8_r_phy_ctrl(struct ksz_device *dev, int port, u16 *val) return 0; } +/** + * ksz8_r_phy_bmcr - Translates and reads from the SMI interface to a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be read. + * @val: The value read from the SMI interface. + * + * This function reads the SMI interface and translates the hardware register + * bit values into their corresponding control settings for a MIIM PHY Basic + * mode control register. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_r_phy_bmcr(struct ksz_device *dev, u16 port, u16 *val) +{ + const u16 *regs = dev->info->regs; + u8 restart, speed, ctrl; + int ret; + + *val = 0; + + ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl); + if (ret) + return ret; + + if (ctrl & PORT_FORCE_100_MBIT) + *val |= BMCR_SPEED100; + + if (ksz_is_ksz88x3(dev)) { + if (restart & KSZ8873_PORT_PHY_LOOPBACK) + *val |= BMCR_LOOPBACK; + + if ((ctrl & PORT_AUTO_NEG_ENABLE)) + *val |= BMCR_ANENABLE; + } else { + ret = ksz879x_get_loopback(dev, port, val); + if (ret) + return ret; + + if (!(ctrl & PORT_AUTO_NEG_DISABLE)) + *val |= BMCR_ANENABLE; + } + + if (restart & PORT_POWER_DOWN) + *val |= BMCR_PDOWN; + + if (restart & PORT_AUTO_NEG_RESTART) + *val |= BMCR_ANRESTART; + + if (ctrl & PORT_FORCE_FULL_DUPLEX) + *val |= BMCR_FULLDPLX; + + if (speed & PORT_HP_MDIX) + *val |= KSZ886X_BMCR_HP_MDIX; + + if (restart & PORT_FORCE_MDIX) + *val |= KSZ886X_BMCR_FORCE_MDI; + + if (restart & PORT_AUTO_MDIX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; + + if (restart & PORT_TX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_TRANSMIT; + + if (restart & PORT_LED_OFF) + *val |= KSZ886X_BMCR_DISABLE_LED; + + return 0; +} + int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) { - u8 restart, speed, ctrl, link; + u8 ctrl, link, val1, val2; int processed = true; const u16 *regs; - u8 val1, val2; u16 data = 0; - u8 p = phy; + u16 p = phy; int ret; regs = dev->info->regs; switch (reg) { case MII_BMCR: - ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); - if (ret) - return ret; - - ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); + ret = ksz8_r_phy_bmcr(dev, p, &data); if (ret) return ret; - - ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); - if (ret) - return ret; - - if (restart & PORT_PHY_LOOPBACK) - data |= BMCR_LOOPBACK; - if (ctrl & PORT_FORCE_100_MBIT) - data |= BMCR_SPEED100; - if (ksz_is_ksz88x3(dev)) { - if ((ctrl & PORT_AUTO_NEG_ENABLE)) - data |= BMCR_ANENABLE; - } else { - if (!(ctrl & PORT_AUTO_NEG_DISABLE)) - data |= BMCR_ANENABLE; - } - if (restart & PORT_POWER_DOWN) - data |= BMCR_PDOWN; - if (restart & PORT_AUTO_NEG_RESTART) - data |= BMCR_ANRESTART; - if (ctrl & PORT_FORCE_FULL_DUPLEX) - data |= BMCR_FULLDPLX; - if (speed & PORT_HP_MDIX) - data |= KSZ886X_BMCR_HP_MDIX; - if (restart & PORT_FORCE_MDIX) - data |= KSZ886X_BMCR_FORCE_MDI; - if (restart & PORT_AUTO_MDIX_DISABLE) - data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; - if (restart & PORT_TX_DISABLE) - data |= KSZ886X_BMCR_DISABLE_TRANSMIT; - if (restart & PORT_LED_OFF) - data |= KSZ886X_BMCR_DISABLE_LED; break; case MII_BMSR: ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); @@ -860,113 +974,137 @@ static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val) return ret; } -int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +/** + * ksz8_w_phy_bmcr - Translates and writes to the SMI interface from a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be configured. + * @val: The register value to be written. + * + * This function translates control settings from a MIIM PHY Basic mode control + * register into their corresponding hardware register bit values for the SMI + * interface. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_w_phy_bmcr(struct ksz_device *dev, u16 port, u16 val) { - u8 restart, speed, ctrl, data; - const u16 *regs; - u8 p = phy; + u8 restart, speed, ctrl, restart_mask; + const u16 *regs = dev->info->regs; int ret; - regs = dev->info->regs; + /* Do not support PHY reset function. */ + if (val & BMCR_RESET) + return 0; - switch (reg) { - case MII_BMCR: + speed = 0; + if (val & KSZ886X_BMCR_HP_MDIX) + speed |= PORT_HP_MDIX; - /* Do not support PHY reset function. */ - if (val & BMCR_RESET) - break; - ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); - if (ret) - return ret; + ret = ksz_prmw8(dev, port, regs[P_SPEED_STATUS], PORT_HP_MDIX, speed); + if (ret) + return ret; - data = speed; - if (val & KSZ886X_BMCR_HP_MDIX) - data |= PORT_HP_MDIX; - else - data &= ~PORT_HP_MDIX; + ctrl = 0; + if (ksz_is_ksz88x3(dev)) { + if ((val & BMCR_ANENABLE)) + ctrl |= PORT_AUTO_NEG_ENABLE; + } else { + if (!(val & BMCR_ANENABLE)) + ctrl |= PORT_AUTO_NEG_DISABLE; - if (data != speed) { - ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data); - if (ret) - return ret; - } + /* Fiber port does not support auto-negotiation. */ + if (dev->ports[port].fiber) + ctrl |= PORT_AUTO_NEG_DISABLE; + } - ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); - if (ret) - return ret; + if (val & BMCR_SPEED100) + ctrl |= PORT_FORCE_100_MBIT; - data = ctrl; - if (ksz_is_ksz88x3(dev)) { - if ((val & BMCR_ANENABLE)) - data |= PORT_AUTO_NEG_ENABLE; - else - data &= ~PORT_AUTO_NEG_ENABLE; - } else { - if (!(val & BMCR_ANENABLE)) - data |= PORT_AUTO_NEG_DISABLE; - else - data &= ~PORT_AUTO_NEG_DISABLE; - - /* Fiber port does not support auto-negotiation. */ - if (dev->ports[p].fiber) - data |= PORT_AUTO_NEG_DISABLE; - } + if (val & BMCR_FULLDPLX) + ctrl |= PORT_FORCE_FULL_DUPLEX; - if (val & BMCR_SPEED100) - data |= PORT_FORCE_100_MBIT; - else - data &= ~PORT_FORCE_100_MBIT; - if (val & BMCR_FULLDPLX) - data |= PORT_FORCE_FULL_DUPLEX; - else - data &= ~PORT_FORCE_FULL_DUPLEX; + ret = ksz_prmw8(dev, port, regs[P_FORCE_CTRL], PORT_FORCE_100_MBIT | + /* PORT_AUTO_NEG_ENABLE and PORT_AUTO_NEG_DISABLE are the same + * bits + */ + PORT_FORCE_FULL_DUPLEX | PORT_AUTO_NEG_ENABLE, ctrl); + if (ret) + return ret; - if (data != ctrl) { - ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data); - if (ret) - return ret; - } + restart = 0; + restart_mask = PORT_LED_OFF | PORT_TX_DISABLE | PORT_AUTO_NEG_RESTART | + PORT_POWER_DOWN | PORT_AUTO_MDIX_DISABLE | PORT_FORCE_MDIX; + + if (val & KSZ886X_BMCR_DISABLE_LED) + restart |= PORT_LED_OFF; + + if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) + restart |= PORT_TX_DISABLE; + + if (val & BMCR_ANRESTART) + restart |= PORT_AUTO_NEG_RESTART; + + if (val & BMCR_PDOWN) + restart |= PORT_POWER_DOWN; + + if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) + restart |= PORT_AUTO_MDIX_DISABLE; + + if (val & KSZ886X_BMCR_FORCE_MDI) + restart |= PORT_FORCE_MDIX; - ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); + if (ksz_is_ksz88x3(dev)) { + restart_mask |= KSZ8873_PORT_PHY_LOOPBACK; + + if (val & BMCR_LOOPBACK) + restart |= KSZ8873_PORT_PHY_LOOPBACK; + } else { + ret = ksz879x_set_loopback(dev, port, val); if (ret) return ret; + } - data = restart; - if (val & KSZ886X_BMCR_DISABLE_LED) - data |= PORT_LED_OFF; - else - data &= ~PORT_LED_OFF; - if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) - data |= PORT_TX_DISABLE; - else - data &= ~PORT_TX_DISABLE; - if (val & BMCR_ANRESTART) - data |= PORT_AUTO_NEG_RESTART; - else - data &= ~(PORT_AUTO_NEG_RESTART); - if (val & BMCR_PDOWN) - data |= PORT_POWER_DOWN; - else - data &= ~PORT_POWER_DOWN; - if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) - data |= PORT_AUTO_MDIX_DISABLE; - else - data &= ~PORT_AUTO_MDIX_DISABLE; - if (val & KSZ886X_BMCR_FORCE_MDI) - data |= PORT_FORCE_MDIX; - else - data &= ~PORT_FORCE_MDIX; - if (val & BMCR_LOOPBACK) - data |= PORT_PHY_LOOPBACK; - else - data &= ~PORT_PHY_LOOPBACK; + return ksz_prmw8(dev, port, regs[P_NEG_RESTART_CTRL], restart_mask, + restart); +} - if (data != restart) { - ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], - data); - if (ret) - return ret; - } +int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + const u16 *regs; + u8 ctrl, data; + u16 p = phy; + int ret; + + regs = dev->info->regs; + + switch (reg) { + case MII_BMCR: + ret = ksz8_w_phy_bmcr(dev, p, val); + if (ret) + return ret; break; case MII_ADVERTISE: ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl); diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h index beca974e01..7c9341ef73 100644 --- a/drivers/net/dsa/microchip/ksz8795_reg.h +++ b/drivers/net/dsa/microchip/ksz8795_reg.h @@ -265,6 +265,7 @@ #define PORT_AUTO_MDIX_DISABLE BIT(2) #define PORT_FORCE_MDIX BIT(1) #define PORT_MAC_LOOPBACK BIT(0) +#define KSZ8873_PORT_PHY_LOOPBACK BIT(0) #define REG_PORT_1_STATUS_2 0x1E #define REG_PORT_2_STATUS_2 0x2E diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index cac4a607e5..82bebee461 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -104,6 +104,10 @@ static const struct of_device_id ksz9477_dt_ids[] = { .data = &ksz_switch_chips[KSZ8563] }, { + .compatible = "microchip,ksz8567", + .data = &ksz_switch_chips[KSZ8567] + }, + { .compatible = "microchip,ksz9567", .data = &ksz_switch_chips[KSZ9567] }, diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 25a49708f4..2b510f150d 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1476,6 +1476,39 @@ const struct ksz_chip_data ksz_switch_chips[] = { .gbit_capable = {true, true, true}, }, + [KSZ8567] = { + .chip_id = KSZ8567_CHIP_ID, + .dev_name = "KSZ8567", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total port count */ + .port_nirqs = 3, + .num_tx_queues = 4, + .tc_cbs_supported = true, + .tc_ets_supported = true, + .ops = &ksz9477_dev_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {false, false, false, false, false, + true, true}, + }, + [KSZ9567] = { .chip_id = KSZ9567_CHIP_ID, .dev_name = "KSZ9567", @@ -1864,6 +1897,29 @@ static void ksz_get_strings(struct dsa_switch *ds, int port, } } +/** + * ksz_update_port_member - Adjust port forwarding rules based on STP state and + * isolation settings. + * @dev: A pointer to the struct ksz_device representing the device. + * @port: The port number to adjust. + * + * This function dynamically adjusts the port membership configuration for a + * specified port and other device ports, based on Spanning Tree Protocol (STP) + * states and port isolation settings. Each port, including the CPU port, has a + * membership register, represented as a bitfield, where each bit corresponds + * to a port number. A set bit indicates permission to forward frames to that + * port. This function iterates over all ports, updating the membership register + * to reflect current forwarding permissions: + * + * 1. Forwards frames only to ports that are part of the same bridge group and + * in the BR_STATE_FORWARDING state. + * 2. Takes into account the isolation status of ports; ports in the + * BR_STATE_FORWARDING state with BR_ISOLATED configuration will not forward + * frames to each other, even if they are in the same bridge group. + * 3. Ensures that the CPU port is included in the membership based on its + * upstream port configuration, allowing for management and control traffic + * to flow as required. + */ static void ksz_update_port_member(struct ksz_device *dev, int port) { struct ksz_port *p = &dev->ports[port]; @@ -1892,7 +1948,14 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) if (other_p->stp_state != BR_STATE_FORWARDING) continue; - if (p->stp_state == BR_STATE_FORWARDING) { + /* At this point we know that "port" and "other" port [i] are in + * the same bridge group and that "other" port [i] is in + * forwarding stp state. If "port" is also in forwarding stp + * state, we can allow forwarding from port [port] to port [i]. + * Except if both ports are isolated. + */ + if (p->stp_state == BR_STATE_FORWARDING && + !(p->isolated && other_p->isolated)) { val |= BIT(port); port_member |= BIT(i); } @@ -1911,8 +1974,19 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) third_p = &dev->ports[j]; if (third_p->stp_state != BR_STATE_FORWARDING) continue; + third_dp = dsa_to_port(ds, j); - if (dsa_port_bridge_same(other_dp, third_dp)) + + /* Now we updating relation of the "other" port [i] to + * the "third" port [j]. We already know that "other" + * port [i] is in forwarding stp state and that "third" + * port [j] is in forwarding stp state too. + * We need to check if "other" port [i] and "third" port + * [j] are in the same bridge group and not isolated + * before allowing forwarding from port [i] to port [j]. + */ + if (dsa_port_bridge_same(other_dp, third_dp) && + !(other_p->isolated && third_p->isolated)) val |= BIT(j); } @@ -2655,6 +2729,7 @@ static void ksz_port_teardown(struct dsa_switch *ds, int port) switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -2670,7 +2745,7 @@ static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { - if (flags.mask & ~BR_LEARNING) + if (flags.mask & ~(BR_LEARNING | BR_ISOLATED)) return -EINVAL; return 0; @@ -2683,8 +2758,12 @@ static int ksz_port_bridge_flags(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; struct ksz_port *p = &dev->ports[port]; - if (flags.mask & BR_LEARNING) { - p->learning = !!(flags.val & BR_LEARNING); + if (flags.mask & (BR_LEARNING | BR_ISOLATED)) { + if (flags.mask & BR_LEARNING) + p->learning = !!(flags.val & BR_LEARNING); + + if (flags.mask & BR_ISOLATED) + p->isolated = !!(flags.val & BR_ISOLATED); /* Make the change take effect immediately */ ksz_port_stp_state_set(ds, port, p->stp_state); @@ -2711,7 +2790,8 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, dev->chip_id == KSZ9563_CHIP_ID) proto = DSA_TAG_PROTO_KSZ9893; - if (dev->chip_id == KSZ9477_CHIP_ID || + if (dev->chip_id == KSZ8567_CHIP_ID || + dev->chip_id == KSZ9477_CHIP_ID || dev->chip_id == KSZ9896_CHIP_ID || dev->chip_id == KSZ9897_CHIP_ID || dev->chip_id == KSZ9567_CHIP_ID) @@ -2819,6 +2899,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case KSZ8830_CHIP_ID: return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -2845,6 +2926,7 @@ static int ksz_validate_eee(struct dsa_switch *ds, int port) switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -2858,7 +2940,7 @@ static int ksz_validate_eee(struct dsa_switch *ds, int port) } static int ksz_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { int ret; @@ -2878,7 +2960,7 @@ static int ksz_get_mac_eee(struct dsa_switch *ds, int port, } static int ksz_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { struct ksz_device *dev = ds->priv; int ret; @@ -3189,6 +3271,7 @@ static int ksz_switch_detect(struct ksz_device *dev) case KSZ9896_CHIP_ID: case KSZ9897_CHIP_ID: case KSZ9567_CHIP_ID: + case KSZ8567_CHIP_ID: case LAN9370_CHIP_ID: case LAN9371_CHIP_ID: case LAN9372_CHIP_ID: @@ -3226,6 +3309,7 @@ static int ksz_cls_flower_add(struct dsa_switch *ds, int port, switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -3245,6 +3329,7 @@ static int ksz_cls_flower_del(struct dsa_switch *ds, int port, switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -4148,6 +4233,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 15612101a1..40c11b0d6b 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -110,6 +110,7 @@ struct ksz_switch_macaddr { struct ksz_port { bool remove_tag; /* Remove Tag flag set, for ksz8795 only */ bool learning; + bool isolated; int stp_state; struct phy_device phydev; @@ -187,6 +188,7 @@ struct ksz_device { /* List of supported models */ enum ksz_model { KSZ8563, + KSZ8567, KSZ8795, KSZ8794, KSZ8765, diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c index 6f6d878e74..c8166fb440 100644 --- a/drivers/net/dsa/microchip/ksz_spi.c +++ b/drivers/net/dsa/microchip/ksz_spi.c @@ -165,6 +165,10 @@ static const struct of_device_id ksz_dt_ids[] = { .data = &ksz_switch_chips[KSZ8563] }, { + .compatible = "microchip,ksz8567", + .data = &ksz_switch_chips[KSZ8567] + }, + { .compatible = "microchip,ksz9567", .data = &ksz_switch_chips[KSZ9567] }, @@ -204,6 +208,7 @@ static const struct spi_device_id ksz_spi_ids[] = { { "ksz9893" }, { "ksz9563" }, { "ksz8563" }, + { "ksz8567" }, { "ksz9567" }, { "lan9370" }, { "lan9371" }, diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c index 088533663b..fa3ee85a99 100644 --- a/drivers/net/dsa/mt7530-mdio.c +++ b/drivers/net/dsa/mt7530-mdio.c @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = { }; static int -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii) +mt7531_create_sgmii(struct mt7530_priv *priv) { struct regmap_config *mt7531_pcs_config[2] = {}; struct phylink_pcs *pcs; struct regmap *regmap; int i, ret = 0; - /* MT7531AE has two SGMII units for port 5 and port 6 - * MT7531BE has only one SGMII unit for port 6 - */ - for (i = dual_sgmii ? 0 : 1; i < 2; i++) { + for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) { mt7531_pcs_config[i] = devm_kzalloc(priv->dev, sizeof(struct regmap_config), GFP_KERNEL); diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index e48ef9823c..8090390eda 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -414,92 +414,57 @@ mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds) } /* Setup port 6 interface mode and TRGMII TX circuit */ -static int -mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) +static void +mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; - u32 ncpo1, ssc_delta, trgint, xtal; - - xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; + u32 ncpo1, ssc_delta, xtal; - if (xtal == HWTRAP_XTAL_20MHZ) { - dev_err(priv->dev, - "%s: MT7530 with a 20MHz XTAL is not supported!\n", - __func__); - return -EINVAL; - } + /* Disable the MT7530 TRGMII clocks */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - trgint = 0; - break; - case PHY_INTERFACE_MODE_TRGMII: - trgint = 1; - if (xtal == HWTRAP_XTAL_25MHZ) - ssc_delta = 0x57; - else - ssc_delta = 0x87; - if (priv->id == ID_MT7621) { - /* PLL frequency: 125MHz: 1.0GBit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0640; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x0a00; - } else { /* PLL frequency: 250MHz: 2.0Gbit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0c80; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x1400; - } - break; - default: - dev_err(priv->dev, "xMII interface %d not supported\n", - interface); - return -EINVAL; + if (interface == PHY_INTERFACE_MODE_RGMII) { + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, + P6_INTF_MODE(0)); + return; } - mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, - P6_INTF_MODE(trgint)); + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1)); - if (trgint) { - /* Disable the MT7530 TRGMII clocks */ - core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); + xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; - /* Setup the MT7530 TRGMII Tx Clock */ - core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); - core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); - core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); - core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); - core_write(priv, CORE_PLL_GROUP4, - RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | - RG_SYSPLL_BIAS_LPF_EN); - core_write(priv, CORE_PLL_GROUP2, - RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | - RG_SYSPLL_POSDIV(1)); - core_write(priv, CORE_PLL_GROUP7, - RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | - RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); + if (xtal == HWTRAP_XTAL_25MHZ) + ssc_delta = 0x57; + else + ssc_delta = 0x87; - /* Enable the MT7530 TRGMII clocks */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); + if (priv->id == ID_MT7621) { + /* PLL frequency: 125MHz: 1.0GBit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0640; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x0a00; + } else { /* PLL frequency: 250MHz: 2.0Gbit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0c80; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x1400; } - return 0; -} - -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) -{ - u32 val; - - val = mt7530_read(priv, MT7531_TOP_SIG_SR); - - return (val & PAD_DUAL_SGMII_EN) != 0; -} + /* Setup the MT7530 TRGMII Tx Clock */ + core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); + core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); + core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); + core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); + core_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | + RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN); + core_write(priv, CORE_PLL_GROUP2, RG_SYSPLL_EN_NORMAL | + RG_SYSPLL_VODEN | RG_SYSPLL_POSDIV(1)); + core_write(priv, CORE_PLL_GROUP7, RG_LCDDS_PCW_NCPO_CHG | + RG_LCCDS_C(3) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); -static int -mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) -{ - return 0; + /* Enable the MT7530 TRGMII clocks */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); } static void @@ -510,9 +475,6 @@ mt7531_pll_setup(struct mt7530_priv *priv) u32 xtal; u32 val; - if (mt7531_dual_sgmii_supported(priv)) - return; - val = mt7530_read(priv, MT7531_CREV); top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); hwstrap = mt7530_read(priv, MT7531_HWTRAP); @@ -920,8 +882,6 @@ static const char *p5_intf_modes(unsigned int p5_interface) return "PHY P4"; case P5_INTF_SEL_GMAC5: return "GMAC5"; - case P5_INTF_SEL_GMAC5_SGMII: - return "GMAC5_SGMII"; default: return "unknown"; } @@ -956,13 +916,8 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ val &= ~MHWTRAP_P5_DIS; break; - case P5_DISABLED: - interface = PHY_INTERFACE_MODE_NA; - break; default: - dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", - priv->p5_intf_sel); - goto unlock_exit; + break; } /* Setup RGMII settings */ @@ -992,9 +947,6 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); - priv->p5_interface = interface; - -unlock_exit: mutex_unlock(&priv->reg_mutex); } @@ -1211,18 +1163,10 @@ mt753x_trap_frames(struct mt7530_priv *priv) MT753X_BPDU_CPU_ONLY); } -static int +static void mt753x_cpu_port_enable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - int ret; - - /* Setup max capability of CPU port at first */ - if (priv->info->cpu_port_config) { - ret = priv->info->cpu_port_config(ds, port); - if (ret) - return ret; - } /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), @@ -1232,10 +1176,6 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); - /* Set CPU port number */ - if (priv->id == ID_MT7530 || priv->id == ID_MT7621) - mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); - /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that * is affine to the inbound user port. @@ -1252,8 +1192,6 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) /* Set to fallback mode for independent VLAN learning */ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, MT7530_PORT_FALLBACK_MODE); - - return 0; } static int @@ -1277,7 +1215,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port, priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); @@ -1297,7 +1234,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port) priv->ports[port].enable = false; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, PCR_MATRIX_CLR); - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); } @@ -2306,7 +2242,7 @@ mt7530_setup_irq(struct mt7530_priv *priv) } /* This register must be set for MT7530 to properly fire interrupts */ - if (priv->id != ID_MT7531) + if (priv->id == ID_MT7530 || priv->id == ID_MT7621) mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL); ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn, @@ -2345,24 +2281,40 @@ mt7530_free_irq_common(struct mt7530_priv *priv) static void mt7530_free_irq(struct mt7530_priv *priv) { - mt7530_free_mdio_irq(priv); + struct device_node *mnp, *np = priv->dev->of_node; + + mnp = of_get_child_by_name(np, "mdio"); + if (!mnp) + mt7530_free_mdio_irq(priv); + of_node_put(mnp); + mt7530_free_irq_common(priv); } static int mt7530_setup_mdio(struct mt7530_priv *priv) { + struct device_node *mnp, *np = priv->dev->of_node; struct dsa_switch *ds = priv->ds; struct device *dev = priv->dev; struct mii_bus *bus; static int idx; - int ret; + int ret = 0; + + mnp = of_get_child_by_name(np, "mdio"); + + if (mnp && !of_device_is_available(mnp)) + goto out; bus = devm_mdiobus_alloc(dev); - if (!bus) - return -ENOMEM; + if (!bus) { + ret = -ENOMEM; + goto out; + } + + if (!mnp) + ds->user_mii_bus = bus; - ds->user_mii_bus = bus; bus->priv = priv; bus->name = KBUILD_MODNAME "-mii"; snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); @@ -2373,16 +2325,18 @@ mt7530_setup_mdio(struct mt7530_priv *priv) bus->parent = dev; bus->phy_mask = ~ds->phys_mii_mask; - if (priv->irq) + if (priv->irq && !mnp) mt7530_setup_mdio_irq(priv); - ret = devm_mdiobus_register(dev, bus); + ret = devm_of_mdiobus_register(dev, bus, mnp); if (ret) { dev_err(dev, "failed to register MDIO bus: %d\n", ret); - if (priv->irq) + if (priv->irq && !mnp) mt7530_free_mdio_irq(priv); } +out: + of_node_put(mnp); return ret; } @@ -2466,6 +2420,12 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } + if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) { + dev_err(priv->dev, + "MT7530 with a 20MHz XTAL is not supported!\n"); + return -EINVAL; + } + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | @@ -2486,8 +2446,6 @@ mt7530_setup(struct dsa_switch *ds) val |= MHWTRAP_MANUAL; mt7530_write(priv, MT7530_MHWTRAP, val); - priv->p6_interface = PHY_INTERFACE_MODE_NA; - if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ) mt7530_pll_setup(priv); @@ -2497,6 +2455,12 @@ mt7530_setup(struct dsa_switch *ds) mt7530_mib_reset(ds); for (i = 0; i < MT7530_NUM_PORTS; i++) { + /* Clear link settings and enable force mode to force link down + * on all ports until they're enabled later. + */ + mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK | + PMCR_FORCE_MODE, PMCR_FORCE_MODE); + /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -2505,9 +2469,7 @@ mt7530_setup(struct dsa_switch *ds) mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2529,16 +2491,13 @@ mt7530_setup(struct dsa_switch *ds) return ret; /* Setup port 5 */ - priv->p5_intf_sel = P5_DISABLED; - interface = PHY_INTERFACE_MODE_NA; - if (!dsa_is_unused_port(ds, 5)) { priv->p5_intf_sel = P5_INTF_SEL_GMAC5; - ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface); - if (ret && ret != -ENODEV) - return ret; } else { - /* Scan the ethernet nodes. look for GMAC1, lookup used phy */ + /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY. + * Set priv->p5_intf_sel to the appropriate value if PHY muxing + * is detected. + */ for_each_child_of_node(dn, mac_np) { if (!of_device_is_compatible(mac_np, "mediatek,eth-mac")) @@ -2569,6 +2528,10 @@ mt7530_setup(struct dsa_switch *ds) of_node_put(phy_node); break; } + + if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 || + priv->p5_intf_sel == P5_INTF_SEL_PHY_P4) + mt7530_setup_port5(ds, interface); } #ifdef CONFIG_GPIOLIB @@ -2579,8 +2542,6 @@ mt7530_setup(struct dsa_switch *ds) } #endif /* CONFIG_GPIOLIB */ - mt7530_setup_port5(ds, interface); - /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) @@ -2605,6 +2566,12 @@ mt7531_setup_common(struct dsa_switch *ds) UNU_FFP_MASK); for (i = 0; i < MT7530_NUM_PORTS; i++) { + /* Clear link settings and enable force mode to force link down + * on all ports until they're enabled later. + */ + mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK | + MT7531_FORCE_MODE, MT7531_FORCE_MODE); + /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -2615,9 +2582,7 @@ mt7531_setup_common(struct dsa_switch *ds) mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2680,38 +2645,35 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } - /* all MACs must be forced link-down before sw reset */ + /* MT7531AE has got two SGMII units. One for port 5, one for port 6. + * MT7531BE has got only one SGMII unit which is for port 6. + */ + val = mt7530_read(priv, MT7531_TOP_SIG_SR); + priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN); + + /* Force link down on all ports before internal reset */ for (i = 0; i < MT7530_NUM_PORTS; i++) mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); /* Reset the switch through internal reset */ - mt7530_write(priv, MT7530_SYS_CTRL, - SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | - SYS_CTRL_REG_RST); - - mt7531_pll_setup(priv); - - if (mt7531_dual_sgmii_supported(priv)) { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; + mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); + if (!priv->p5_sgmii) { + mt7531_pll_setup(priv); + } else { /* Let ds->user_mii_bus be able to access external phy. */ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, MT7531_EXT_P_MDC_11); mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, MT7531_EXT_P_MDIO_12); - } else { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5; } - dev_dbg(ds->dev, "P5 support %s interface\n", - p5_intf_modes(priv->p5_intf_sel)); + + if (!dsa_is_unused_port(ds, 5)) + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); - /* Let phylink decide the interface later. */ - priv->p5_interface = PHY_INTERFACE_MODE_NA; - priv->p6_interface = PHY_INTERFACE_MODE_NA; - /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since * phy_device has not yet been created provided for * phy_[read,write]_mmd_indirect is called, we provide our own @@ -2748,12 +2710,14 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + /* Port 5 supports rgmii with delays, mii, and gmii. */ + case 5: phy_interface_set_rgmii(config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); @@ -2761,7 +2725,8 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, config->supported_interfaces); break; - case 6: /* 1st cpu port */ + /* Port 6 supports rgmii and trgmii. */ + case 6: __set_bit(PHY_INTERFACE_MODE_RGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_TRGMII, @@ -2770,30 +2735,30 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, } } -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) -{ - return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); -} - static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { struct mt7530_priv *priv = ds->priv; switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ - if (mt7531_is_rgmii_port(priv, port)) { + /* Port 5 supports rgmii with delays on MT7531BE, sgmii/802.3z on + * MT7531AE. + */ + case 5: + if (!priv->p5_sgmii) { phy_interface_set_rgmii(config->supported_interfaces); break; } fallthrough; - case 6: /* 1st cpu port supports sgmii/8023z only */ + /* Port 6 supports sgmii/802.3z. */ + case 6: __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_1000BASEX, @@ -2809,14 +2774,14 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { - phy_interface_zero(config->supported_interfaces); - switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 3: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); break; + /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */ case 6: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); @@ -2825,41 +2790,24 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, } } -static int -mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) -{ - struct mt7530_priv *priv = ds->priv; - - return priv->info->pad_setup(ds, state->interface); -} - -static int +static void mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; - /* Only need to setup port5. */ - if (port != 5) - return 0; - - mt7530_setup_port5(priv->ds, interface); - - return 0; + if (port == 5) + mt7530_setup_port5(priv->ds, interface); + else if (port == 6) + mt7530_setup_port6(priv->ds, interface); } -static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, - phy_interface_t interface, - struct phy_device *phydev) +static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, + phy_interface_t interface, + struct phy_device *phydev) { u32 val; - if (!mt7531_is_rgmii_port(priv, port)) { - dev_err(priv->dev, "RGMII mode is not available for port %d\n", - port); - return -EINVAL; - } - val = mt7530_read(priv, MT7531_CLKGEN_CTRL); val |= GP_CLK_EN; val &= ~GP_MODE_MASK; @@ -2887,31 +2835,14 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, case PHY_INTERFACE_MODE_RGMII_ID: break; default: - return -EINVAL; + break; } } - mt7530_write(priv, MT7531_CLKGEN_CTRL, val); - - return 0; -} -static bool mt753x_is_mac_port(u32 port) -{ - return (port == 5 || port == 6); -} - -static int -mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - phy_interface_t interface) -{ - if (dsa_is_cpu_port(ds, port) && - interface == PHY_INTERFACE_MODE_INTERNAL) - return 0; - - return -EINVAL; + mt7530_write(priv, MT7531_CLKGEN_CTRL, val); } -static int +static void mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { @@ -2919,39 +2850,11 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, struct phy_device *phydev; struct dsa_port *dp; - if (!mt753x_is_mac_port(port)) { - dev_err(priv->dev, "port %d is not a MAC port\n", port); - return -EINVAL; - } - - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: + if (phy_interface_mode_is_rgmii(interface)) { dp = dsa_to_port(ds, port); phydev = dp->user->phydev; - return mt7531_rgmii_setup(priv, port, interface, phydev); - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_NA: - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_2500BASEX: - /* handled in SGMII PCS driver */ - return 0; - default: - return -EINVAL; + mt7531_rgmii_setup(priv, port, interface, phydev); } - - return -EINVAL; -} - -static int -mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - const struct phylink_link_state *state) -{ - struct mt7530_priv *priv = ds->priv; - - return priv->info->mac_port_config(ds, port, mode, state->interface); } static struct phylink_pcs * @@ -2977,54 +2880,13 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; - - switch (port) { - case 0 ... 4: /* Internal phy */ - if (state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL) - goto unsupported; - break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ - if (priv->p5_interface == state->interface) - break; - - if (mt753x_mac_config(ds, port, mode, state) < 0) - goto unsupported; - - if (priv->p5_intf_sel != P5_DISABLED) - priv->p5_interface = state->interface; - break; - case 6: /* 1st cpu port */ - if (priv->p6_interface == state->interface) - break; - - mt753x_pad_setup(ds, state); - if (mt753x_mac_config(ds, port, mode, state) < 0) - goto unsupported; - - priv->p6_interface = state->interface; - break; - default: -unsupported: - dev_err(ds->dev, "%s: unsupported %s port: %i\n", - __func__, phy_modes(state->interface), port); - return; - } - - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; - mcr_new &= ~PMCR_LINK_SETTINGS_MASK; - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); + if ((port == 5 || port == 6) && priv->info->mac_port_config) + priv->info->mac_port_config(ds, port, mode, state->interface); /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) - mcr_new |= PMCR_EXT_PHY; - - if (mcr_new != mcr_cur) - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); + mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY); } static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, @@ -3048,17 +2910,10 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; - /* MT753x MAC works in 1G full duplex mode for all up-clocked - * variants. - */ - if (interface == PHY_INTERFACE_MODE_TRGMII || - (phy_interface_mode_is_8023z(interface))) { - speed = SPEED_1000; - duplex = DUPLEX_FULL; - } - switch (speed) { case SPEED_1000: + case SPEED_2500: + case SPEED_10000: mcr |= PMCR_FORCE_SPEED_1000; break; case SPEED_100: @@ -3076,6 +2931,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) { switch (speed) { case SPEED_1000: + case SPEED_2500: mcr |= PMCR_FORCE_EEE1G; break; case SPEED_100: @@ -3087,63 +2943,6 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, mt7530_set(priv, MT7530_PMCR_P(port), mcr); } -static int -mt7531_cpu_port_config(struct dsa_switch *ds, int port) -{ - struct mt7530_priv *priv = ds->priv; - phy_interface_t interface; - int speed; - int ret; - - switch (port) { - case 5: - if (mt7531_is_rgmii_port(priv, port)) - interface = PHY_INTERFACE_MODE_RGMII; - else - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p5_interface = interface; - break; - case 6: - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p6_interface = interface; - break; - default: - return -EINVAL; - } - - if (interface == PHY_INTERFACE_MODE_2500BASEX) - speed = SPEED_2500; - else - speed = SPEED_1000; - - ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); - if (ret) - return ret; - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, - speed, DUPLEX_FULL, true, true); - - return 0; -} - -static int -mt7988_cpu_port_config(struct dsa_switch *ds, int port) -{ - struct mt7530_priv *priv = ds->priv; - - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); - - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, - PHY_INTERFACE_MODE_INTERNAL, NULL, - SPEED_10000, DUPLEX_FULL, true, true); - - return 0; -} - static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { @@ -3226,17 +3025,9 @@ static int mt753x_setup(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; - int i, ret; - - /* Initialise the PCS devices */ - for (i = 0; i < priv->ds->num_ports; i++) { - priv->pcs[i].pcs.ops = priv->info->pcs_ops; - priv->pcs[i].pcs.neg_mode = true; - priv->pcs[i].priv = priv; - priv->pcs[i].port = i; - } + int ret = priv->info->sw_setup(ds); + int i; - ret = priv->info->sw_setup(ds); if (ret) return ret; @@ -3248,8 +3039,16 @@ mt753x_setup(struct dsa_switch *ds) if (ret && priv->irq) mt7530_free_irq_common(priv); + /* Initialise the PCS devices */ + for (i = 0; i < priv->ds->num_ports; i++) { + priv->pcs[i].pcs.ops = priv->info->pcs_ops; + priv->pcs[i].pcs.neg_mode = true; + priv->pcs[i].priv = priv; + priv->pcs[i].port = i; + } + if (priv->create_sgmii) { - ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv)); + ret = priv->create_sgmii(priv); if (ret && priv->irq) mt7530_free_irq(priv); } @@ -3258,7 +3057,7 @@ mt753x_setup(struct dsa_switch *ds) } static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { struct mt7530_priv *priv = ds->priv; u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port)); @@ -3270,7 +3069,7 @@ static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, } static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { struct mt7530_priv *priv = ds->priv; u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; @@ -3287,9 +3086,34 @@ static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, return 0; } -static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface) +static void +mt753x_conduit_state_change(struct dsa_switch *ds, + const struct net_device *conduit, + bool operational) { - return 0; + struct dsa_port *cpu_dp = conduit->dsa_ptr; + struct mt7530_priv *priv = ds->priv; + int val = 0; + u8 mask; + + /* Set the CPU port to trap frames to for MT7530. Trapped frames will be + * forwarded to the numerically smallest CPU port whose conduit + * interface is up. + */ + if (priv->id != ID_MT7530 && priv->id != ID_MT7621) + return; + + mask = BIT(cpu_dp->index); + + if (operational) + priv->active_cpu_ports |= mask; + else + priv->active_cpu_ports &= ~mask; + + if (priv->active_cpu_ports) + val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports)); + + mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val); } static int mt7988_setup(struct dsa_switch *ds) @@ -3342,6 +3166,7 @@ const struct dsa_switch_ops mt7530_switch_ops = { .phylink_mac_link_up = mt753x_phylink_mac_link_up, .get_mac_eee = mt753x_get_mac_eee, .set_mac_eee = mt753x_set_mac_eee, + .conduit_state_change = mt753x_conduit_state_change, }; EXPORT_SYMBOL_GPL(mt7530_switch_ops); @@ -3354,7 +3179,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3366,7 +3190,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3378,8 +3201,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .pad_setup = mt7531_pad_setup, - .cpu_port_config = mt7531_cpu_port_config, .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, }, @@ -3391,10 +3212,7 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .pad_setup = mt7988_pad_setup, - .cpu_port_config = mt7988_cpu_port_config, .mac_port_get_caps = mt7988_mac_port_get_caps, - .mac_port_config = mt7988_mac_config, }, }; EXPORT_SYMBOL_GPL(mt753x_table); @@ -3421,10 +3239,8 @@ mt7530_probe_common(struct mt7530_priv *priv) /* Sanity check if these required device operations are filled * properly. */ - if (!priv->info->sw_setup || !priv->info->pad_setup || - !priv->info->phy_read_c22 || !priv->info->phy_write_c22 || - !priv->info->mac_port_get_caps || - !priv->info->mac_port_config) + if (!priv->info->sw_setup || !priv->info->phy_read_c22 || + !priv->info->phy_write_c22 || !priv->info->mac_port_get_caps) return -EINVAL; priv->id = priv->info->id; diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 0ad52d3cbf..a08053390b 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -45,8 +45,8 @@ enum mt753x_id { #define UNU_FFP(x) (((x) & 0xff) << 8) #define UNU_FFP_MASK UNU_FFP(~0) #define CPU_EN BIT(7) -#define CPU_PORT(x) ((x) << 4) -#define CPU_MASK (0xf << 4) +#define CPU_PORT_MASK GENMASK(6, 4) +#define CPU_PORT(x) FIELD_PREP(CPU_PORT_MASK, x) #define MIRROR_EN BIT(3) #define MIRROR_PORT(x) ((x) & 0x7) #define MIRROR_MASK 0x7 @@ -333,20 +333,11 @@ enum mt7530_vlan_port_acc_frm { MT7531_FORCE_DPX | \ MT7531_FORCE_RX_FC | \ MT7531_FORCE_TX_FC) -#define PMCR_FORCE_MODE_ID(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ - MT7531_FORCE_MODE : PMCR_FORCE_MODE) #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ PMCR_FORCE_FDX | PMCR_FORCE_LNK | \ PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100) -#define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \ - PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ - PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ - PMCR_TX_EN | PMCR_RX_EN | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ - PMCR_FORCE_SPEED_1000 | \ - PMCR_FORCE_FDX | PMCR_FORCE_LNK) #define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100) #define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24) @@ -713,11 +704,10 @@ struct mt7530_port { /* Port 5 interface select definitions */ enum p5_interface_select { - P5_DISABLED = 0, + P5_DISABLED, P5_INTF_SEL_PHY_P0, P5_INTF_SEL_PHY_P4, P5_INTF_SEL_GMAC5, - P5_INTF_SEL_GMAC5_SGMII, }; struct mt7530_priv; @@ -735,8 +725,6 @@ struct mt753x_pcs { * @phy_write_c22: Holding the way writing PHY port using C22 * @phy_read_c45: Holding the way reading PHY port using C45 * @phy_write_c45: Holding the way writing PHY port using C45 - * @pad_setup: Holding the way setting up the bus pad for a certain - * MAC port * @phy_mode_supported: Check if the PHY type is being supported on a certain * port * @mac_port_validate: Holding the way to set addition validate type for a @@ -757,16 +745,14 @@ struct mt753x_info { int regnum); int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad, int regnum, u16 val); - int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); - int (*cpu_port_config)(struct dsa_switch *ds, int port); void (*mac_port_get_caps)(struct dsa_switch *ds, int port, struct phylink_config *config); void (*mac_port_validate)(struct dsa_switch *ds, int port, phy_interface_t interface, unsigned long *supported); - int (*mac_port_config)(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface); + void (*mac_port_config)(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface); }; /* struct mt7530_priv - This is the main data structure for holding the state @@ -784,12 +770,14 @@ struct mt753x_info { * @ports: Holding the state among ports * @reg_mutex: The lock for protecting among process accessing * registers - * @p6_interface Holding the current port 6 interface * @p5_intf_sel: Holding the current port 5 interface select + * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch + * has got SGMII * @irq: IRQ number of the switch * @irq_domain: IRQ domain of the switch irq_chip * @irq_enable: IRQ enable bits, synced to SYS_INT_EN * @create_sgmii: Pointer to function creating SGMII PCS instance(s) + * @active_cpu_ports: Holding the active CPU ports */ struct mt7530_priv { struct device *dev; @@ -803,9 +791,8 @@ struct mt7530_priv { const struct mt753x_info *info; unsigned int id; bool mcm; - phy_interface_t p6_interface; - phy_interface_t p5_interface; - unsigned int p5_intf_sel; + enum p5_interface_select p5_intf_sel; + bool p5_sgmii; u8 mirror_rx; u8 mirror_tx; struct mt7530_port ports[MT7530_NUM_PORTS]; @@ -815,7 +802,8 @@ struct mt7530_priv { int irq; struct irq_domain *irq_domain; u32 irq_enable; - int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii); + int (*create_sgmii)(struct mt7530_priv *priv); + u8 active_cpu_ports; }; struct mt7530_hw_vlan_entry { diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 2ad9e4cd7b..0918bd6fa8 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -637,12 +637,12 @@ static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, MAC_1000FD; } -static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) +static int mv88e63xx_get_port_serdes_cmode(struct mv88e6xxx_chip *chip, int port) { u16 reg, val; int err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, ®); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®); if (err) return err; @@ -651,16 +651,16 @@ static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) return 0xf; val = reg & ~MV88E6XXX_PORT_STS_PHY_DETECT; - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, val); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, val); if (err) return err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, &val); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &val); if (err) return err; /* Restore PHY_DETECT value */ - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, reg); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, reg); if (err) return err; @@ -688,7 +688,7 @@ static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, if (err <= 0) return; - cmode = mv88e6352_get_port4_serdes_cmode(chip); + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); if (cmode < 0) dev_err(chip->dev, "p%d: failed to read serdes cmode\n", port); @@ -701,12 +701,23 @@ static void mv88e632x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, struct phylink_config *config) { unsigned long *supported = config->supported_interfaces; + int cmode; /* Translate the default cmode */ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD; + + /* Port 0/1 are serdes only ports */ + if (port == 0 || port == 1) { + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); + if (cmode < 0) + dev_err(chip->dev, "p%d: failed to read serdes cmode\n", + port); + else + mv88e6xxx_translate_cmode(cmode, supported); + } } static void mv88e6341_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, @@ -1511,14 +1522,14 @@ static void mv88e6xxx_get_regs(struct dsa_switch *ds, int port, } static int mv88e6xxx_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { /* Nothing to do on the port's MAC */ return 0; } static int mv88e6xxx_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { /* Nothing to do on the port's MAC */ return 0; @@ -3135,7 +3146,6 @@ static int mv88e6xxx_software_reset(struct mv88e6xxx_chip *chip) static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip) { struct gpio_desc *gpiod = chip->reset; - int err; /* If there is a GPIO connected to the reset pin, toggle it */ if (gpiod) { @@ -3144,26 +3154,17 @@ static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip) * mid-byte, causing the first EEPROM read after the reset * from the wrong location resulting in the switch booting * to wrong mode and inoperable. - * For this reason, switch families with EEPROM support - * generally wait for EEPROM loads to complete as their pre- - * and post-reset handlers. */ - if (chip->info->ops->hardware_reset_pre) { - err = chip->info->ops->hardware_reset_pre(chip); - if (err) - dev_err(chip->dev, "pre-reset error: %d\n", err); - } + if (chip->info->ops->get_eeprom) + mv88e6xxx_g2_eeprom_wait(chip); gpiod_set_value_cansleep(gpiod, 1); usleep_range(10000, 20000); gpiod_set_value_cansleep(gpiod, 0); usleep_range(10000, 20000); - if (chip->info->ops->hardware_reset_post) { - err = chip->info->ops->hardware_reset_post(chip); - if (err) - dev_err(chip->dev, "post-reset error: %d\n", err); - } + if (chip->info->ops->get_eeprom) + mv88e6xxx_g2_eeprom_wait(chip); } } @@ -3729,7 +3730,7 @@ static int mv88e6xxx_mdio_read_c45(struct mii_bus *bus, int phy, int devad, int err; if (!chip->info->ops->phy_read_c45) - return 0xffff; + return -ENODEV; mv88e6xxx_reg_lock(chip); err = chip->info->ops->phy_read_c45(chip, bus, phy, devad, reg, &val); @@ -3782,7 +3783,10 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip, if (external) { mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_g2_scratch_gpio_set_smi(chip, true); + if (chip->info->family == MV88E6XXX_FAMILY_6393) + err = mv88e6393x_g2_scratch_gpio_set_smi(chip, true); + else + err = mv88e6390_g2_scratch_gpio_set_smi(chip, true); mv88e6xxx_reg_unlock(chip); if (err) @@ -4390,8 +4394,6 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4582,8 +4584,6 @@ static const struct mv88e6xxx_ops mv88e6172_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4684,8 +4684,6 @@ static const struct mv88e6xxx_ops mv88e6176_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4780,8 +4778,6 @@ static const struct mv88e6xxx_ops mv88e6190_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4840,8 +4836,6 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4898,8 +4892,6 @@ static const struct mv88e6xxx_ops mv88e6191_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4959,8 +4951,6 @@ static const struct mv88e6xxx_ops mv88e6240_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5014,8 +5004,6 @@ static const struct mv88e6xxx_ops mv88e6250_ops = { .watchdog_ops = &mv88e6250_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6250_g1_wait_eeprom_done_prereset, - .hardware_reset_post = mv88e6xxx_g1_wait_eeprom_done, .reset = mv88e6250_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, @@ -5063,8 +5051,6 @@ static const struct mv88e6xxx_ops mv88e6290_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5124,8 +5110,6 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, @@ -5172,8 +5156,6 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, @@ -5224,8 +5206,6 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5381,8 +5361,6 @@ static const struct mv88e6xxx_ops mv88e6352_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5445,8 +5423,6 @@ static const struct mv88e6xxx_ops mv88e6390_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5509,8 +5485,6 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5576,8 +5550,6 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = { .watchdog_ops = &mv88e6393x_watchdog_ops, .mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, - .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, - .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index c34caf9815..85eb293381 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -487,12 +487,6 @@ struct mv88e6xxx_ops { int (*ppu_enable)(struct mv88e6xxx_chip *chip); int (*ppu_disable)(struct mv88e6xxx_chip *chip); - /* Additional handlers to run before and after hard reset, to make sure - * that the switch and EEPROM are in a good state. - */ - int (*hardware_reset_pre)(struct mv88e6xxx_chip *chip); - int (*hardware_reset_post)(struct mv88e6xxx_chip *chip); - /* Switch Software Reset */ int (*reset)(struct mv88e6xxx_chip *chip); diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c index 9820cd5967..49444a72ff 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.c +++ b/drivers/net/dsa/mv88e6xxx/global1.c @@ -75,95 +75,6 @@ static int mv88e6xxx_g1_wait_init_ready(struct mv88e6xxx_chip *chip) return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_STS, bit, 1); } -static int mv88e6250_g1_eeprom_reload(struct mv88e6xxx_chip *chip) -{ - /* MV88E6185_G1_CTL1_RELOAD_EEPROM is also valid for 88E6250 */ - int bit = __bf_shf(MV88E6185_G1_CTL1_RELOAD_EEPROM); - u16 val; - int err; - - err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val); - if (err) - return err; - - val |= MV88E6185_G1_CTL1_RELOAD_EEPROM; - - err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val); - if (err) - return err; - - return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_CTL1, bit, 0); -} - -/* Returns 0 when done, -EBUSY when waiting, other negative codes on error */ -static int mv88e6xxx_g1_is_eeprom_done(struct mv88e6xxx_chip *chip) -{ - u16 val; - int err; - - err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_STS, &val); - if (err < 0) { - dev_err(chip->dev, "Error reading status"); - return err; - } - - /* If the switch is still resetting, it may not - * respond on the bus, and so MDIO read returns - * 0xffff. Differentiate between that, and waiting for - * the EEPROM to be done by bit 0 being set. - */ - if (val == 0xffff || !(val & BIT(MV88E6XXX_G1_STS_IRQ_EEPROM_DONE))) - return -EBUSY; - - return 0; -} - -/* As the EEInt (EEPROM done) flag clears on read if the status register, this - * function must be called directly after a hard reset or EEPROM ReLoad request, - * or the done condition may have been missed - */ -int mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip) -{ - const unsigned long timeout = jiffies + 1 * HZ; - int ret; - - /* Wait up to 1 second for the switch to finish reading the - * EEPROM. - */ - while (time_before(jiffies, timeout)) { - ret = mv88e6xxx_g1_is_eeprom_done(chip); - if (ret != -EBUSY) - return ret; - } - - dev_err(chip->dev, "Timeout waiting for EEPROM done"); - return -ETIMEDOUT; -} - -int mv88e6250_g1_wait_eeprom_done_prereset(struct mv88e6xxx_chip *chip) -{ - int ret; - - ret = mv88e6xxx_g1_is_eeprom_done(chip); - if (ret != -EBUSY) - return ret; - - /* Pre-reset, we don't know the state of the switch - when - * mv88e6xxx_g1_is_eeprom_done() returns -EBUSY, that may be because - * the switch is actually busy reading the EEPROM, or because - * MV88E6XXX_G1_STS_IRQ_EEPROM_DONE has been cleared by an unrelated - * status register read already. - * - * To account for the latter case, trigger another EEPROM reload for - * another chance at seeing the done flag. - */ - ret = mv88e6250_g1_eeprom_reload(chip); - if (ret) - return ret; - - return mv88e6xxx_g1_wait_eeprom_done(chip); -} - /* Offset 0x01: Switch MAC Address Register Bytes 0 & 1 * Offset 0x02: Switch MAC Address Register Bytes 2 & 3 * Offset 0x03: Switch MAC Address Register Bytes 4 & 5 diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h index 3dbb7a1b8f..1095261f5b 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.h +++ b/drivers/net/dsa/mv88e6xxx/global1.h @@ -282,8 +282,6 @@ int mv88e6xxx_g1_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr); int mv88e6185_g1_reset(struct mv88e6xxx_chip *chip); int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip); int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip); -int mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip); -int mv88e6250_g1_wait_eeprom_done_prereset(struct mv88e6xxx_chip *chip); int mv88e6185_g1_ppu_enable(struct mv88e6xxx_chip *chip); int mv88e6185_g1_ppu_disable(struct mv88e6xxx_chip *chip); diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h index d9434f7cae..82f9b410de 100644 --- a/drivers/net/dsa/mv88e6xxx/global2.h +++ b/drivers/net/dsa/mv88e6xxx/global2.h @@ -378,8 +378,10 @@ extern const struct mv88e6xxx_avb_ops mv88e6390_avb_ops; extern const struct mv88e6xxx_gpio_ops mv88e6352_gpio_ops; -int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, +int mv88e6390_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, bool external); +int mv88e6393x_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, + bool external); int mv88e6352_g2_scratch_port_has_serdes(struct mv88e6xxx_chip *chip, int port); int mv88e6xxx_g2_atu_stats_set(struct mv88e6xxx_chip *chip, u16 kind, u16 bin); int mv88e6xxx_g2_atu_stats_get(struct mv88e6xxx_chip *chip, u16 *stats); diff --git a/drivers/net/dsa/mv88e6xxx/global2_scratch.c b/drivers/net/dsa/mv88e6xxx/global2_scratch.c index a9d6e40321..61ab6cc4fb 100644 --- a/drivers/net/dsa/mv88e6xxx/global2_scratch.c +++ b/drivers/net/dsa/mv88e6xxx/global2_scratch.c @@ -240,7 +240,7 @@ const struct mv88e6xxx_gpio_ops mv88e6352_gpio_ops = { }; /** - * mv88e6xxx_g2_scratch_gpio_set_smi - set gpio muxing for external smi + * mv88e6390_g2_scratch_gpio_set_smi - set gpio muxing for external smi * @chip: chip private data * @external: set mux for external smi, or free for gpio usage * @@ -248,7 +248,7 @@ const struct mv88e6xxx_gpio_ops mv88e6352_gpio_ops = { * an external SMI interface, or they may be made free for other * GPIO uses. */ -int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, +int mv88e6390_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, bool external) { int misc_cfg = MV88E6352_G2_SCRATCH_MISC_CFG; @@ -291,6 +291,37 @@ int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, } /** + * mv88e6393x_g2_scratch_gpio_set_smi - set gpio muxing for external smi + * @chip: chip private data + * @external: set mux for external smi, or free for gpio usage + * + * MV88E6191X/6193X/6393X GPIO pins 9 and 10 can be configured as an + * external SMI interface or as regular GPIO-s. + * + * They however have a different register layout then the existing + * function. + */ + +int mv88e6393x_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, + bool external) +{ + int misc_cfg = MV88E6352_G2_SCRATCH_MISC_CFG; + int err; + u8 val; + + err = mv88e6xxx_g2_scratch_read(chip, misc_cfg, &val); + if (err) + return err; + + if (external) + val &= ~MV88E6352_G2_SCRATCH_MISC_CFG_NORMALSMI; + else + val |= MV88E6352_G2_SCRATCH_MISC_CFG_NORMALSMI; + + return mv88e6xxx_g2_scratch_write(chip, misc_cfg, val); +} + +/** * mv88e6352_g2_scratch_port_has_serdes - indicate if a port can have a serdes * @chip: chip private data * @port: port number to check for serdes diff --git a/drivers/net/dsa/mv88e6xxx/pcs-6185.c b/drivers/net/dsa/mv88e6xxx/pcs-6185.c index 4d677f8368..5a27d047a3 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-6185.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-6185.c @@ -95,7 +95,7 @@ static void mv88e6185_pcs_get_state(struct phylink_pcs *pcs, } } -static int mv88e6185_pcs_config(struct phylink_pcs *pcs, unsigned int mode, +static int mv88e6185_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, phy_interface_t interface, const unsigned long *advertising, bool permit_pause_to_mac) @@ -137,6 +137,7 @@ static int mv88e6185_pcs_init(struct mv88e6xxx_chip *chip, int port) mpcs->chip = chip; mpcs->port = port; mpcs->phylink_pcs.ops = &mv88e6185_phylink_pcs_ops; + mpcs->phylink_pcs.neg_mode = true; irq = mv88e6xxx_serdes_irq_mapping(chip, port); if (irq) { diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index 95d78b3181..dab66c0c6f 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -950,7 +950,7 @@ qca8k_mdio_register(struct qca8k_priv *priv) struct device *dev = ds->dev; struct device_node *mdio; struct mii_bus *bus; - int err = 0; + int ret = 0; mdio = of_get_child_by_name(dev->of_node, "mdio"); if (mdio && !of_device_is_available(mdio)) @@ -958,7 +958,7 @@ qca8k_mdio_register(struct qca8k_priv *priv) bus = devm_mdiobus_alloc(dev); if (!bus) { - err = -ENOMEM; + ret = -ENOMEM; goto out_put_node; } @@ -984,11 +984,11 @@ qca8k_mdio_register(struct qca8k_priv *priv) bus->write = qca8k_legacy_mdio_write; } - err = devm_of_mdiobus_register(dev, bus, mdio); + ret = devm_of_mdiobus_register(dev, bus, mdio); out_put_node: of_node_put(mdio); - return err; + return ret; } static int @@ -997,7 +997,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg; struct device_node *ports, *port; phy_interface_t mode; - int err; + int ret; ports = of_get_child_by_name(priv->dev->of_node, "ports"); if (!ports) @@ -1007,11 +1007,11 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) return -EINVAL; for_each_available_child_of_node(ports, port) { - err = of_property_read_u32(port, "reg", ®); - if (err) { + ret = of_property_read_u32(port, "reg", ®); + if (ret) { of_node_put(port); of_node_put(ports); - return err; + return ret; } if (!dsa_is_user_port(priv->ds, reg)) diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c index 2358cd399c..7f80035c54 100644 --- a/drivers/net/dsa/qca/qca8k-common.c +++ b/drivers/net/dsa/qca/qca8k-common.c @@ -534,7 +534,7 @@ int qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset) } int qca8k_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *eee) + struct ethtool_keee *eee) { u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port); struct qca8k_priv *priv = ds->priv; @@ -558,7 +558,7 @@ exit: } int qca8k_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { /* Nothing to do on the port's MAC */ return 0; diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h index c8785c36c5..2184d8d2d5 100644 --- a/drivers/net/dsa/qca/qca8k.h +++ b/drivers/net/dsa/qca/qca8k.h @@ -518,8 +518,8 @@ void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, int qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset); /* Common eee function */ -int qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee); -int qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e); +int qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *eee); +int qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e); /* Common bridge function */ void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state); diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig index 060165a85f..6989972eeb 100644 --- a/drivers/net/dsa/realtek/Kconfig +++ b/drivers/net/dsa/realtek/Kconfig @@ -16,37 +16,29 @@ menuconfig NET_DSA_REALTEK if NET_DSA_REALTEK config NET_DSA_REALTEK_MDIO - tristate "Realtek MDIO interface driver" + bool "Realtek MDIO interface support" depends on OF - depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB - depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB - depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB help Select to enable support for registering switches configured through MDIO. config NET_DSA_REALTEK_SMI - tristate "Realtek SMI interface driver" + bool "Realtek SMI interface support" depends on OF - depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB - depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB - depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB help Select to enable support for registering switches connected through SMI. config NET_DSA_REALTEK_RTL8365MB - tristate "Realtek RTL8365MB switch subdriver" - imply NET_DSA_REALTEK_SMI - imply NET_DSA_REALTEK_MDIO + tristate "Realtek RTL8365MB switch driver" + depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO select NET_DSA_TAG_RTL8_4 help Select to enable support for Realtek RTL8365MB-VC and RTL8367S. config NET_DSA_REALTEK_RTL8366RB - tristate "Realtek RTL8366RB switch subdriver" - imply NET_DSA_REALTEK_SMI - imply NET_DSA_REALTEK_MDIO + tristate "Realtek RTL8366RB switch driver" + depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO select NET_DSA_TAG_RTL4_A help Select to enable support for Realtek RTL8366RB. diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile index 0aab57252a..35491dc20d 100644 --- a/drivers/net/dsa/realtek/Makefile +++ b/drivers/net/dsa/realtek/Makefile @@ -1,6 +1,15 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o -obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o +obj-$(CONFIG_NET_DSA_REALTEK) += realtek_dsa.o +realtek_dsa-objs := rtl83xx.o + +ifdef CONFIG_NET_DSA_REALTEK_MDIO +realtek_dsa-objs += realtek-mdio.o +endif + +ifdef CONFIG_NET_DSA_REALTEK_SMI +realtek_dsa-objs += realtek-smi.o +endif + obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o rtl8366-objs := rtl8366-core.o rtl8366rb.o obj-$(CONFIG_NET_DSA_REALTEK_RTL8365MB) += rtl8365mb.o diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c index 292e6d087e..04b758e5a6 100644 --- a/drivers/net/dsa/realtek/realtek-mdio.c +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -25,6 +25,8 @@ #include <linux/regmap.h> #include "realtek.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" /* Read/write via mdiobus */ #define REALTEK_MDIO_CTRL0_REG 31 @@ -99,192 +101,87 @@ out_unlock: return ret; } -static void realtek_mdio_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_mdio_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_mdio_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_mdio_info = { .reg_read = realtek_mdio_read, .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_mdio_lock, - .unlock = realtek_mdio_unlock, }; -static const struct regmap_config realtek_mdio_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_mdio_read, - .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - -static int realtek_mdio_probe(struct mdio_device *mdiodev) +/** + * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch + * @mdiodev: mdio_device to probe on. + * + * This function should be used as the .probe in an mdio_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for MDIO-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_mdio_probe(struct mdio_device *mdiodev) { - struct realtek_priv *priv; struct device *dev = &mdiodev->dev; - const struct realtek_variant *var; - struct regmap_config rc; - struct device_node *np; + struct realtek_priv *priv; int ret; - var = of_device_get_match_data(dev); - if (!var) - return -EINVAL; - - priv = devm_kzalloc(&mdiodev->dev, - size_add(sizeof(*priv), var->chip_data_sz), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - mutex_init(&priv->map_lock); + priv = rtl83xx_probe(dev, &realtek_mdio_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); - rc = realtek_mdio_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_mdio_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - priv->mdio_addr = mdiodev->addr; priv->bus = mdiodev->bus; - priv->dev = &mdiodev->dev; - priv->chip_data = (void *)priv + sizeof(*priv); - - priv->clk_delay = var->clk_delay; - priv->cmd_read = var->cmd_read; - priv->cmd_write = var->cmd_write; - priv->ops = var->ops; - + priv->mdio_addr = mdiodev->addr; priv->write_reg_noack = realtek_mdio_write; - np = dev->of_node; - - dev_set_drvdata(dev, priv); - - /* TODO: if power is software controlled, set up any regulators here */ - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; - } - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; - priv->ds->ops = var->ds_ops_mdio; - - ret = dsa_register_switch(priv->ds); + ret = rtl83xx_register_switch(priv); if (ret) { - dev_err(priv->dev, "unable to register switch ret = %d\n", ret); + rtl83xx_remove(priv); return ret; } return 0; } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA); -static void realtek_mdio_remove(struct mdio_device *mdiodev) +/** + * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch + * @mdiodev: mdio_device to be removed. + * + * This function should be used as the .remove_new in an mdio_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_remove(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_unregister_switch(priv->ds); + rtl83xx_unregister_switch(priv); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA); -static void realtek_mdio_shutdown(struct mdio_device *mdiodev) +/** + * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch + * @mdiodev: mdio_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_shutdown(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_switch_shutdown(priv->ds); - - dev_set_drvdata(&mdiodev->dev, NULL); + rtl83xx_shutdown(priv); } - -static const struct of_device_id realtek_mdio_of_match[] = { -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) - { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, -#endif -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) - { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, -#endif - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, realtek_mdio_of_match); - -static struct mdio_driver realtek_mdio_driver = { - .mdiodrv.driver = { - .name = "realtek-mdio", - .of_match_table = realtek_mdio_of_match, - }, - .probe = realtek_mdio_probe, - .remove = realtek_mdio_remove, - .shutdown = realtek_mdio_shutdown, -}; - -mdio_module_driver(realtek_mdio_driver); - -MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); -MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface"); -MODULE_LICENSE("GPL"); +EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/realtek-mdio.h b/drivers/net/dsa/realtek/realtek-mdio.h new file mode 100644 index 0000000000..ee70f6a5b8 --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-mdio.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _REALTEK_MDIO_H +#define _REALTEK_MDIO_H + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) + +static inline int realtek_mdio_driver_register(struct mdio_driver *drv) +{ + return mdio_driver_register(drv); +} + +static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv) +{ + mdio_driver_unregister(drv); +} + +int realtek_mdio_probe(struct mdio_device *mdiodev); +void realtek_mdio_remove(struct mdio_device *mdiodev); +void realtek_mdio_shutdown(struct mdio_device *mdiodev); + +#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */ + +static inline int realtek_mdio_driver_register(struct mdio_driver *drv) +{ + return 0; +} + +static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv) +{ +} + +static inline int realtek_mdio_probe(struct mdio_device *mdiodev) +{ + return -ENOENT; +} + +static inline void realtek_mdio_remove(struct mdio_device *mdiodev) +{ +} + +static inline void realtek_mdio_shutdown(struct mdio_device *mdiodev) +{ +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */ + +#endif /* _REALTEK_MDIO_H */ diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c index 755546ed8d..88590ae95a 100644 --- a/drivers/net/dsa/realtek/realtek-smi.c +++ b/drivers/net/dsa/realtek/realtek-smi.c @@ -31,7 +31,6 @@ #include <linux/spinlock.h> #include <linux/skbuff.h> #include <linux/of.h> -#include <linux/of_mdio.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> @@ -40,12 +39,14 @@ #include <linux/if_bridge.h> #include "realtek.h" +#include "realtek-smi.h" +#include "rtl83xx.h" #define REALTEK_SMI_ACK_RETRY_COUNT 5 static inline void realtek_smi_clk_delay(struct realtek_priv *priv) { - ndelay(priv->clk_delay); + ndelay(priv->variant->clk_delay); } static void realtek_smi_start(struct realtek_priv *priv) @@ -208,7 +209,7 @@ static int realtek_smi_read_reg(struct realtek_priv *priv, u32 addr, u32 *data) realtek_smi_start(priv); /* Send READ command */ - ret = realtek_smi_write_byte(priv, priv->cmd_read); + ret = realtek_smi_write_byte(priv, priv->variant->cmd_read); if (ret) goto out; @@ -249,7 +250,7 @@ static int realtek_smi_write_reg(struct realtek_priv *priv, realtek_smi_start(priv); /* Send WRITE command */ - ret = realtek_smi_write_byte(priv, priv->cmd_write); + ret = realtek_smi_write_byte(priv, priv->variant->cmd_write); if (ret) goto out; @@ -310,258 +311,98 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val) return realtek_smi_read_reg(priv, reg, val); } -static void realtek_smi_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_smi_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_smi_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_smi_info = { .reg_read = realtek_smi_read, .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_smi_lock, - .unlock = realtek_smi_unlock, }; -static const struct regmap_config realtek_smi_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_smi_read, - .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - -static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum) -{ - struct realtek_priv *priv = bus->priv; - - return priv->ops->phy_read(priv, addr, regnum); -} - -static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum, - u16 val) -{ - struct realtek_priv *priv = bus->priv; - - return priv->ops->phy_write(priv, addr, regnum, val); -} - -static int realtek_smi_setup_mdio(struct dsa_switch *ds) -{ - struct realtek_priv *priv = ds->priv; - struct device_node *mdio_np; - int ret; - - mdio_np = of_get_compatible_child(priv->dev->of_node, "realtek,smi-mdio"); - if (!mdio_np) { - dev_err(priv->dev, "no MDIO bus node\n"); - return -ENODEV; - } - - priv->user_mii_bus = devm_mdiobus_alloc(priv->dev); - if (!priv->user_mii_bus) { - ret = -ENOMEM; - goto err_put_node; - } - priv->user_mii_bus->priv = priv; - priv->user_mii_bus->name = "SMI user MII"; - priv->user_mii_bus->read = realtek_smi_mdio_read; - priv->user_mii_bus->write = realtek_smi_mdio_write; - snprintf(priv->user_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d", - ds->index); - priv->user_mii_bus->dev.of_node = mdio_np; - priv->user_mii_bus->parent = priv->dev; - ds->user_mii_bus = priv->user_mii_bus; - - ret = devm_of_mdiobus_register(priv->dev, priv->user_mii_bus, mdio_np); - if (ret) { - dev_err(priv->dev, "unable to register MDIO bus %s\n", - priv->user_mii_bus->id); - goto err_put_node; - } - - return 0; - -err_put_node: - of_node_put(mdio_np); - - return ret; -} - -static int realtek_smi_probe(struct platform_device *pdev) +/** + * realtek_smi_probe() - Probe a platform device for an SMI-connected switch + * @pdev: platform_device to probe on. + * + * This function should be used as the .probe in a platform_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for SMI-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_smi_probe(struct platform_device *pdev) { - const struct realtek_variant *var; struct device *dev = &pdev->dev; struct realtek_priv *priv; - struct regmap_config rc; - struct device_node *np; int ret; - var = of_device_get_match_data(dev); - np = dev->of_node; - - priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->chip_data = (void *)priv + sizeof(*priv); - - mutex_init(&priv->map_lock); - - rc = realtek_smi_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_smi_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - /* Link forward and backward */ - priv->dev = dev; - priv->clk_delay = var->clk_delay; - priv->cmd_read = var->cmd_read; - priv->cmd_write = var->cmd_write; - priv->ops = var->ops; - - priv->setup_interface = realtek_smi_setup_mdio; - priv->write_reg_noack = realtek_smi_write_reg_noack; - - dev_set_drvdata(dev, priv); - spin_lock_init(&priv->lock); - - /* TODO: if power is software controlled, set up any regulators here */ - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } + priv = rtl83xx_probe(dev, &realtek_smi_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); /* Fetch MDIO pins */ priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW); - if (IS_ERR(priv->mdc)) + if (IS_ERR(priv->mdc)) { + rtl83xx_remove(priv); return PTR_ERR(priv->mdc); + } + priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW); - if (IS_ERR(priv->mdio)) + if (IS_ERR(priv->mdio)) { + rtl83xx_remove(priv); return PTR_ERR(priv->mdio); - - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; } - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; + priv->write_reg_noack = realtek_smi_write_reg_noack; - priv->ds->ops = var->ds_ops_smi; - ret = dsa_register_switch(priv->ds); + ret = rtl83xx_register_switch(priv); if (ret) { - dev_err_probe(dev, ret, "unable to register switch\n"); + rtl83xx_remove(priv); return ret; } + return 0; } +EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA); -static void realtek_smi_remove(struct platform_device *pdev) +/** + * realtek_smi_remove() - Remove the driver of a SMI-connected switch + * @pdev: platform_device to be removed. + * + * This function should be used as the .remove_new in a platform_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_smi_remove(struct platform_device *pdev) { struct realtek_priv *priv = platform_get_drvdata(pdev); if (!priv) return; - dsa_unregister_switch(priv->ds); - if (priv->user_mii_bus) - of_node_put(priv->user_mii_bus->dev.of_node); + rtl83xx_unregister_switch(priv); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } +EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, REALTEK_DSA); -static void realtek_smi_shutdown(struct platform_device *pdev) +/** + * realtek_smi_shutdown() - Shutdown the driver of a SMI-connected switch + * @pdev: platform_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_smi_shutdown(struct platform_device *pdev) { struct realtek_priv *priv = platform_get_drvdata(pdev); if (!priv) return; - dsa_switch_shutdown(priv->ds); - - platform_set_drvdata(pdev, NULL); + rtl83xx_shutdown(priv); } - -static const struct of_device_id realtek_smi_of_match[] = { -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) - { - .compatible = "realtek,rtl8366rb", - .data = &rtl8366rb_variant, - }, -#endif -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) - { - .compatible = "realtek,rtl8365mb", - .data = &rtl8365mb_variant, - }, -#endif - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, realtek_smi_of_match); - -static struct platform_driver realtek_smi_driver = { - .driver = { - .name = "realtek-smi", - .of_match_table = realtek_smi_of_match, - }, - .probe = realtek_smi_probe, - .remove_new = realtek_smi_remove, - .shutdown = realtek_smi_shutdown, -}; -module_platform_driver(realtek_smi_driver); - -MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); -MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface"); -MODULE_LICENSE("GPL"); +EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/realtek-smi.h b/drivers/net/dsa/realtek/realtek-smi.h new file mode 100644 index 0000000000..ea49a2edd3 --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-smi.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _REALTEK_SMI_H +#define _REALTEK_SMI_H + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) + +static inline int realtek_smi_driver_register(struct platform_driver *drv) +{ + return platform_driver_register(drv); +} + +static inline void realtek_smi_driver_unregister(struct platform_driver *drv) +{ + platform_driver_unregister(drv); +} + +int realtek_smi_probe(struct platform_device *pdev); +void realtek_smi_remove(struct platform_device *pdev); +void realtek_smi_shutdown(struct platform_device *pdev); + +#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */ + +static inline int realtek_smi_driver_register(struct platform_driver *drv) +{ + return 0; +} + +static inline void realtek_smi_driver_unregister(struct platform_driver *drv) +{ +} + +static inline int realtek_smi_probe(struct platform_device *pdev) +{ + return -ENOENT; +} + +static inline void realtek_smi_remove(struct platform_device *pdev) +{ +} + +static inline void realtek_smi_shutdown(struct platform_device *pdev) +{ +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */ + +#endif /* _REALTEK_SMI_H */ diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h index 790488e9c6..e0b1aa0133 100644 --- a/drivers/net/dsa/realtek/realtek.h +++ b/drivers/net/dsa/realtek/realtek.h @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/gpio/consumer.h> #include <net/dsa.h> +#include <linux/reset.h> #define REALTEK_HW_STOP_DELAY 25 /* msecs */ #define REALTEK_HW_START_DELAY 100 /* msecs */ @@ -48,6 +49,7 @@ struct rtl8366_vlan_4k { struct realtek_priv { struct device *dev; + struct reset_control *reset_ctl; struct gpio_desc *reset; struct gpio_desc *mdc; struct gpio_desc *mdio; @@ -58,11 +60,10 @@ struct realtek_priv { struct mii_bus *bus; int mdio_addr; - unsigned int clk_delay; - u8 cmd_read; - u8 cmd_write; + const struct realtek_variant *variant; + spinlock_t lock; /* Locks around command writes */ - struct dsa_switch *ds; + struct dsa_switch ds; struct irq_domain *irqdomain; bool leds_disabled; @@ -73,7 +74,6 @@ struct realtek_priv { struct rtl8366_mib_counter *mib_counters; const struct realtek_ops *ops; - int (*setup_interface)(struct dsa_switch *ds); int (*write_reg_noack)(void *ctx, u32 addr, u32 data); int vlan_enabled; @@ -91,7 +91,6 @@ struct realtek_ops { int (*detect)(struct realtek_priv *priv); int (*reset_chip)(struct realtek_priv *priv); int (*setup)(struct realtek_priv *priv); - void (*cleanup)(struct realtek_priv *priv); int (*get_mib_counter)(struct realtek_priv *priv, int port, struct rtl8366_mib_counter *mib, @@ -116,8 +115,7 @@ struct realtek_ops { }; struct realtek_variant { - const struct dsa_switch_ops *ds_ops_smi; - const struct dsa_switch_ops *ds_ops_mdio; + const struct dsa_switch_ops *ds_ops; const struct realtek_ops *ops; unsigned int clk_delay; u8 cmd_read; diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c index b072045eb1..12665a8a34 100644 --- a/drivers/net/dsa/realtek/rtl8365mb.c +++ b/drivers/net/dsa/realtek/rtl8365mb.c @@ -101,6 +101,9 @@ #include <linux/if_vlan.h> #include "realtek.h" +#include "realtek-smi.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" /* Family-specific data and limits */ #define RTL8365MB_PHYADDRMAX 7 @@ -206,10 +209,10 @@ #define RTL8365MB_EXT_PORT_MODE_100FX 13 /* External interface mode configuration registers 0~1 */ -#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT1 */ +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT0,EXT1 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 0x13C3 /* EXT2 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(_extint) \ - ((_extint) == 1 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 : \ + ((_extint) <= 1 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 : \ (_extint) == 2 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 : \ 0x0) #define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(_extint) \ @@ -689,7 +692,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -722,7 +725,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, *data = val & 0xFFFF; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -733,7 +736,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -764,7 +767,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return 0; } @@ -825,17 +828,6 @@ static int rtl8365mb_phy_write(struct realtek_priv *priv, int phy, int regnum, return 0; } -static int rtl8365mb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) -{ - return rtl8365mb_phy_read(ds->priv, phy, regnum); -} - -static int rtl8365mb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, - u16 val) -{ - return rtl8365mb_phy_write(ds->priv, phy, regnum, val); -} - static const struct rtl8365mb_extint * rtl8365mb_get_port_extint(struct realtek_priv *priv, int port) { @@ -878,6 +870,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, { const struct rtl8365mb_extint *extint = rtl8365mb_get_port_extint(priv, port); + struct dsa_switch *ds = &priv->ds; struct device_node *dn; struct dsa_port *dp; int tx_delay = 0; @@ -888,7 +881,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, if (!extint) return -ENODEV; - dp = dsa_to_port(priv->ds, port); + dp = dsa_to_port(ds, port); dn = dp->dn; /* Set the RGMII TX/RX delay @@ -1541,6 +1534,7 @@ static void rtl8365mb_get_stats64(struct dsa_switch *ds, int port, static void rtl8365mb_stats_setup(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; + struct dsa_switch *ds = &priv->ds; int i; /* Per-chip global mutex to protect MIB counter access, since doing @@ -1551,7 +1545,7 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv) for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; /* Per-port spinlock to protect the stats64 data */ @@ -1567,12 +1561,13 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv) static void rtl8365mb_stats_teardown(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; + struct dsa_switch *ds = &priv->ds; int i; for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; cancel_delayed_work_sync(&p->mib_work); @@ -1971,7 +1966,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) dev_info(priv->dev, "no interrupt support\n"); /* Configure CPU tagging */ - dsa_switch_for_each_cpu_port(cpu_dp, priv->ds) { + dsa_switch_for_each_cpu_port(cpu_dp, ds) { cpu->mask |= BIT(cpu_dp->index); if (cpu->trap_port == RTL8365MB_MAX_NUM_PORTS) @@ -1986,7 +1981,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; /* Forward only to the CPU */ @@ -2003,7 +1998,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) * ports will still forward frames to the CPU despite being * administratively down by default. */ - rtl8365mb_port_stp_state_set(priv->ds, i, BR_STATE_DISABLED); + rtl8365mb_port_stp_state_set(ds, i, BR_STATE_DISABLED); /* Set up per-port private data */ p->priv = priv; @@ -2014,12 +2009,10 @@ static int rtl8365mb_setup(struct dsa_switch *ds) if (ret) goto out_teardown_irq; - if (priv->setup_interface) { - ret = priv->setup_interface(ds); - if (ret) { - dev_err(priv->dev, "could not set up MDIO bus\n"); - goto out_teardown_irq; - } + ret = rtl83xx_setup_user_mdio(ds); + if (ret) { + dev_err(priv->dev, "could not set up MDIO bus\n"); + goto out_teardown_irq; } /* Start statistics counter polling */ @@ -2113,7 +2106,7 @@ static int rtl8365mb_detect(struct realtek_priv *priv) return 0; } -static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = { +static const struct dsa_switch_ops rtl8365mb_switch_ops = { .get_tag_protocol = rtl8365mb_get_tag_protocol, .change_tag_protocol = rtl8365mb_change_tag_protocol, .setup = rtl8365mb_setup, @@ -2134,29 +2127,6 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = { .port_max_mtu = rtl8365mb_port_max_mtu, }; -static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = { - .get_tag_protocol = rtl8365mb_get_tag_protocol, - .change_tag_protocol = rtl8365mb_change_tag_protocol, - .setup = rtl8365mb_setup, - .teardown = rtl8365mb_teardown, - .phylink_get_caps = rtl8365mb_phylink_get_caps, - .phylink_mac_config = rtl8365mb_phylink_mac_config, - .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down, - .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up, - .phy_read = rtl8365mb_dsa_phy_read, - .phy_write = rtl8365mb_dsa_phy_write, - .port_stp_state_set = rtl8365mb_port_stp_state_set, - .get_strings = rtl8365mb_get_strings, - .get_ethtool_stats = rtl8365mb_get_ethtool_stats, - .get_sset_count = rtl8365mb_get_sset_count, - .get_eth_phy_stats = rtl8365mb_get_phy_stats, - .get_eth_mac_stats = rtl8365mb_get_mac_stats, - .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats, - .get_stats64 = rtl8365mb_get_stats64, - .port_change_mtu = rtl8365mb_port_change_mtu, - .port_max_mtu = rtl8365mb_port_max_mtu, -}; - static const struct realtek_ops rtl8365mb_ops = { .detect = rtl8365mb_detect, .phy_read = rtl8365mb_phy_read, @@ -2164,16 +2134,66 @@ static const struct realtek_ops rtl8365mb_ops = { }; const struct realtek_variant rtl8365mb_variant = { - .ds_ops_smi = &rtl8365mb_switch_ops_smi, - .ds_ops_mdio = &rtl8365mb_switch_ops_mdio, + .ds_ops = &rtl8365mb_switch_ops, .ops = &rtl8365mb_ops, .clk_delay = 10, .cmd_read = 0xb9, .cmd_write = 0xb8, .chip_data_sz = sizeof(struct rtl8365mb), }; -EXPORT_SYMBOL_GPL(rtl8365mb_variant); + +static const struct of_device_id rtl8365mb_of_match[] = { + { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rtl8365mb_of_match); + +static struct platform_driver rtl8365mb_smi_driver = { + .driver = { + .name = "rtl8365mb-smi", + .of_match_table = rtl8365mb_of_match, + }, + .probe = realtek_smi_probe, + .remove_new = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, +}; + +static struct mdio_driver rtl8365mb_mdio_driver = { + .mdiodrv.driver = { + .name = "rtl8365mb-mdio", + .of_match_table = rtl8365mb_of_match, + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +static int rtl8365mb_init(void) +{ + int ret; + + ret = realtek_mdio_driver_register(&rtl8365mb_mdio_driver); + if (ret) + return ret; + + ret = realtek_smi_driver_register(&rtl8365mb_smi_driver); + if (ret) { + realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver); + return ret; + } + + return 0; +} +module_init(rtl8365mb_init); + +static void __exit rtl8365mb_exit(void) +{ + realtek_smi_driver_unregister(&rtl8365mb_smi_driver); + realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver); +} +module_exit(rtl8365mb_exit); MODULE_AUTHOR("Alvin Šipraga <alsi@bang-olufsen.dk>"); MODULE_DESCRIPTION("Driver for RTL8365MB-VC ethernet switch"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c index 59f98d2c87..7c6520ba3a 100644 --- a/drivers/net/dsa/realtek/rtl8366-core.c +++ b/drivers/net/dsa/realtek/rtl8366-core.c @@ -34,7 +34,7 @@ int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used) return 0; } -EXPORT_SYMBOL_GPL(rtl8366_mc_is_used); +EXPORT_SYMBOL_NS_GPL(rtl8366_mc_is_used, REALTEK_DSA); /** * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration @@ -187,7 +187,7 @@ int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member, return ret; } -EXPORT_SYMBOL_GPL(rtl8366_set_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_vlan, REALTEK_DSA); int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, unsigned int vid) @@ -217,7 +217,7 @@ int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_set_pvid); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_pvid, REALTEK_DSA); int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) { @@ -243,7 +243,7 @@ int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) priv->vlan4k_enabled = enable; return 0; } -EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan4k, REALTEK_DSA); int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) { @@ -265,7 +265,7 @@ int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) return ret; } -EXPORT_SYMBOL_GPL(rtl8366_enable_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan, REALTEK_DSA); int rtl8366_reset_vlan(struct realtek_priv *priv) { @@ -290,7 +290,7 @@ int rtl8366_reset_vlan(struct realtek_priv *priv) return 0; } -EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_reset_vlan, REALTEK_DSA); int rtl8366_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, @@ -345,7 +345,7 @@ int rtl8366_vlan_add(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_vlan_add); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_add, REALTEK_DSA); int rtl8366_vlan_del(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan) @@ -389,7 +389,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_vlan_del); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_del, REALTEK_DSA); void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) @@ -403,7 +403,7 @@ void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, for (i = 0; i < priv->num_mib_counters; i++) ethtool_puts(&data, priv->mib_counters[i].name); } -EXPORT_SYMBOL_GPL(rtl8366_get_strings); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_strings, REALTEK_DSA); int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) { @@ -417,7 +417,7 @@ int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) return priv->num_mib_counters; } -EXPORT_SYMBOL_GPL(rtl8366_get_sset_count); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_sset_count, REALTEK_DSA); void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) { @@ -441,4 +441,4 @@ void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) data[i] = mibvalue; } } -EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_ethtool_stats, REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index e3b6a470ca..e10ae94cf7 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -23,6 +23,9 @@ #include <linux/regmap.h> #include "realtek.h" +#include "realtek-smi.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" #define RTL8366RB_PORT_NUM_CPU 5 #define RTL8366RB_NUM_PORTS 6 @@ -1030,12 +1033,10 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (ret) dev_info(priv->dev, "no interrupt support\n"); - if (priv->setup_interface) { - ret = priv->setup_interface(ds); - if (ret) { - dev_err(priv->dev, "could not set up MDIO bus\n"); - return -ENODEV; - } + ret = rtl83xx_setup_user_mdio(ds); + if (ret) { + dev_err(priv->dev, "could not set up MDIO bus\n"); + return -ENODEV; } return 0; @@ -1650,6 +1651,7 @@ static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val) static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index) { + struct dsa_switch *ds = &priv->ds; struct rtl8366rb *rb; bool pvid_enabled; int ret; @@ -1674,7 +1676,7 @@ static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index * not drop any untagged or C-tagged frames. Make sure to update the * filtering setting. */ - if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port))) + if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled); return ret; @@ -1718,7 +1720,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_READ); @@ -1746,7 +1748,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) phy, regnum, reg, val); out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -1760,7 +1762,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_WRITE); @@ -1777,22 +1779,11 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } -static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) -{ - return rtl8366rb_phy_read(ds->priv, phy, regnum); -} - -static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, - u16 val) -{ - return rtl8366rb_phy_write(ds->priv, phy, regnum, val); -} - static int rtl8366rb_reset_chip(struct realtek_priv *priv) { int timeout = 10; @@ -1858,7 +1849,7 @@ static int rtl8366rb_detect(struct realtek_priv *priv) return 0; } -static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = { +static const struct dsa_switch_ops rtl8366rb_switch_ops = { .get_tag_protocol = rtl8366_get_tag_protocol, .setup = rtl8366rb_setup, .phylink_get_caps = rtl8366rb_phylink_get_caps, @@ -1882,32 +1873,6 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = { .port_max_mtu = rtl8366rb_max_mtu, }; -static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = { - .get_tag_protocol = rtl8366_get_tag_protocol, - .setup = rtl8366rb_setup, - .phy_read = rtl8366rb_dsa_phy_read, - .phy_write = rtl8366rb_dsa_phy_write, - .phylink_get_caps = rtl8366rb_phylink_get_caps, - .phylink_mac_link_up = rtl8366rb_mac_link_up, - .phylink_mac_link_down = rtl8366rb_mac_link_down, - .get_strings = rtl8366_get_strings, - .get_ethtool_stats = rtl8366_get_ethtool_stats, - .get_sset_count = rtl8366_get_sset_count, - .port_bridge_join = rtl8366rb_port_bridge_join, - .port_bridge_leave = rtl8366rb_port_bridge_leave, - .port_vlan_filtering = rtl8366rb_vlan_filtering, - .port_vlan_add = rtl8366_vlan_add, - .port_vlan_del = rtl8366_vlan_del, - .port_enable = rtl8366rb_port_enable, - .port_disable = rtl8366rb_port_disable, - .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, - .port_bridge_flags = rtl8366rb_port_bridge_flags, - .port_stp_state_set = rtl8366rb_port_stp_state_set, - .port_fast_age = rtl8366rb_port_fast_age, - .port_change_mtu = rtl8366rb_change_mtu, - .port_max_mtu = rtl8366rb_max_mtu, -}; - static const struct realtek_ops rtl8366rb_ops = { .detect = rtl8366rb_detect, .get_vlan_mc = rtl8366rb_get_vlan_mc, @@ -1925,16 +1890,66 @@ static const struct realtek_ops rtl8366rb_ops = { }; const struct realtek_variant rtl8366rb_variant = { - .ds_ops_smi = &rtl8366rb_switch_ops_smi, - .ds_ops_mdio = &rtl8366rb_switch_ops_mdio, + .ds_ops = &rtl8366rb_switch_ops, .ops = &rtl8366rb_ops, .clk_delay = 10, .cmd_read = 0xa9, .cmd_write = 0xa8, .chip_data_sz = sizeof(struct rtl8366rb), }; -EXPORT_SYMBOL_GPL(rtl8366rb_variant); + +static const struct of_device_id rtl8366rb_of_match[] = { + { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rtl8366rb_of_match); + +static struct platform_driver rtl8366rb_smi_driver = { + .driver = { + .name = "rtl8366rb-smi", + .of_match_table = rtl8366rb_of_match, + }, + .probe = realtek_smi_probe, + .remove_new = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, +}; + +static struct mdio_driver rtl8366rb_mdio_driver = { + .mdiodrv.driver = { + .name = "rtl8366rb-mdio", + .of_match_table = rtl8366rb_of_match, + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +static int rtl8366rb_init(void) +{ + int ret; + + ret = realtek_mdio_driver_register(&rtl8366rb_mdio_driver); + if (ret) + return ret; + + ret = realtek_smi_driver_register(&rtl8366rb_smi_driver); + if (ret) { + realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver); + return ret; + } + + return 0; +} +module_init(rtl8366rb_init); + +static void __exit rtl8366rb_exit(void) +{ + realtek_smi_driver_unregister(&rtl8366rb_smi_driver); + realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver); +} +module_exit(rtl8366rb_exit); MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c new file mode 100644 index 0000000000..d2e8768053 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of_mdio.h> + +#include "realtek.h" +#include "rtl83xx.h" + +/** + * rtl83xx_lock() - Locks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function is passed to regmap to be used as the lock function. + * It is also used externally to block regmap before executing multiple + * operations that must happen in sequence (which will use + * realtek_priv.map_nolock instead). + * + * Context: Can sleep. Holds priv->map_lock lock. + * Return: nothing + */ +void rtl83xx_lock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_lock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, REALTEK_DSA); + +/** + * rtl83xx_unlock() - Unlocks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function unlocks the lock acquired by rtl83xx_lock. + * + * Context: Releases priv->map_lock lock. + * Return: nothing + */ +void rtl83xx_unlock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_unlock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, REALTEK_DSA); + +static int rtl83xx_user_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_read(priv, addr, regnum); +} + +static int rtl83xx_user_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_write(priv, addr, regnum, val); +} + +/** + * rtl83xx_setup_user_mdio() - register the user mii bus driver + * @ds: DSA switch associated with this user_mii_bus + * + * Registers the MDIO bus for built-in Ethernet PHYs, and associates it with + * the mandatory 'mdio' child OF node of the switch. + * + * Context: Can sleep. + * Return: 0 on success, negative value for failure. + */ +int rtl83xx_setup_user_mdio(struct dsa_switch *ds) +{ + struct realtek_priv *priv = ds->priv; + struct device_node *mdio_np; + struct mii_bus *bus; + int ret = 0; + + mdio_np = of_get_child_by_name(priv->dev->of_node, "mdio"); + if (!mdio_np) { + dev_err(priv->dev, "no MDIO bus node\n"); + return -ENODEV; + } + + bus = devm_mdiobus_alloc(priv->dev); + if (!bus) { + ret = -ENOMEM; + goto err_put_node; + } + + bus->priv = priv; + bus->name = "Realtek user MII"; + bus->read = rtl83xx_user_mdio_read; + bus->write = rtl83xx_user_mdio_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s:user_mii", dev_name(priv->dev)); + bus->parent = priv->dev; + + ret = devm_of_mdiobus_register(priv->dev, bus, mdio_np); + if (ret) { + dev_err(priv->dev, "unable to register MDIO bus %s\n", + bus->id); + goto err_put_node; + } + + priv->user_mii_bus = bus; + +err_put_node: + of_node_put(mdio_np); + + return ret; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, REALTEK_DSA); + +/** + * rtl83xx_probe() - probe a Realtek switch + * @dev: the device being probed + * @interface_info: specific management interface info. + * + * This function initializes realtek_priv and reads data from the device tree + * node. The switch is hard resetted if a method is provided. + * + * Context: Can sleep. + * Return: Pointer to the realtek_priv or ERR_PTR() in case of failure. + * + * The realtek_priv pointer does not need to be freed as it is controlled by + * devres. + */ +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info) +{ + const struct realtek_variant *var; + struct realtek_priv *priv; + struct regmap_config rc = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = interface_info->reg_read, + .reg_write = interface_info->reg_write, + .cache_type = REGCACHE_NONE, + .lock = rtl83xx_lock, + .unlock = rtl83xx_unlock, + }; + int ret; + + var = of_device_get_match_data(dev); + if (!var) + return ERR_PTR(-EINVAL); + + priv = devm_kzalloc(dev, size_add(sizeof(*priv), var->chip_data_sz), + GFP_KERNEL); + if (!priv) + return ERR_PTR(-ENOMEM); + + mutex_init(&priv->map_lock); + + rc.lock_arg = priv; + priv->map = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map)) { + ret = PTR_ERR(priv->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + rc.disable_locking = true; + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map_nolock)) { + ret = PTR_ERR(priv->map_nolock); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + /* Link forward and backward */ + priv->dev = dev; + priv->variant = var; + priv->ops = var->ops; + priv->chip_data = (void *)priv + sizeof(*priv); + + spin_lock_init(&priv->lock); + + priv->leds_disabled = of_property_read_bool(dev->of_node, + "realtek,disable-leds"); + + /* TODO: if power is software controlled, set up any regulators here */ + priv->reset_ctl = devm_reset_control_get_optional(dev, NULL); + if (IS_ERR(priv->reset_ctl)) { + ret = PTR_ERR(priv->reset_ctl); + dev_err_probe(dev, ret, "failed to get reset control\n"); + return ERR_CAST(priv->reset_ctl); + } + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return ERR_CAST(priv->reset); + } + + dev_set_drvdata(dev, priv); + + if (priv->reset_ctl || priv->reset) { + rtl83xx_reset_assert(priv); + dev_dbg(dev, "asserted RESET\n"); + msleep(REALTEK_HW_STOP_DELAY); + rtl83xx_reset_deassert(priv); + msleep(REALTEK_HW_START_DELAY); + dev_dbg(dev, "deasserted RESET\n"); + } + + return priv; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, REALTEK_DSA); + +/** + * rtl83xx_register_switch() - detects and register a switch + * @priv: realtek_priv pointer + * + * This function first checks the switch chip ID and register a DSA + * switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: 0 on success, negative value for failure. + */ +int rtl83xx_register_switch(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + int ret; + + ret = priv->ops->detect(priv); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to detect switch\n"); + return ret; + } + + ds->priv = priv; + ds->dev = priv->dev; + ds->ops = priv->variant->ds_ops; + ds->num_ports = priv->num_ports; + + ret = dsa_register_switch(ds); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to register switch\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA); + +/** + * rtl83xx_unregister_switch() - unregister a switch + * @priv: realtek_priv pointer + * + * This function unregister a DSA switch. + * + * Context: Can sleep. + * Return: Nothing. + */ +void rtl83xx_unregister_switch(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + + dsa_unregister_switch(ds); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA); + +/** + * rtl83xx_shutdown() - shutdown a switch + * @priv: realtek_priv pointer + * + * This function shuts down the DSA switch and cleans the platform driver data, + * to prevent realtek_{smi,mdio}_remove() from running afterwards, which is + * possible if the parent bus implements its own .shutdown() as .remove(). + * + * Context: Can sleep. + * Return: Nothing. + */ +void rtl83xx_shutdown(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(priv->dev, NULL); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA); + +/** + * rtl83xx_remove() - Cleanup a realtek switch driver + * @priv: realtek_priv pointer + * + * If a method is provided, this function asserts the hard reset of the switch + * in order to avoid leaking traffic when the driver is gone. + * + * Context: Might sleep if priv->gdev->chip->can_sleep. + * Return: nothing + */ +void rtl83xx_remove(struct realtek_priv *priv) +{ + /* leave the device reset asserted */ + rtl83xx_reset_assert(priv); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA); + +void rtl83xx_reset_assert(struct realtek_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->reset_ctl); + if (ret) + dev_warn(priv->dev, + "Failed to assert the switch reset control: %pe\n", + ERR_PTR(ret)); + + gpiod_set_value(priv->reset, true); +} + +void rtl83xx_reset_deassert(struct realtek_priv *priv) +{ + int ret; + + ret = reset_control_deassert(priv->reset_ctl); + if (ret) + dev_warn(priv->dev, + "Failed to deassert the switch reset control: %pe\n", + ERR_PTR(ret)); + + gpiod_set_value(priv->reset, false); +} + +MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("Realtek DSA switches common module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/realtek/rtl83xx.h b/drivers/net/dsa/realtek/rtl83xx.h new file mode 100644 index 0000000000..c8a0ff8fd7 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _RTL83XX_H +#define _RTL83XX_H + +struct realtek_interface_info { + int (*reg_read)(void *ctx, u32 reg, u32 *val); + int (*reg_write)(void *ctx, u32 reg, u32 val); +}; + +void rtl83xx_lock(void *ctx); +void rtl83xx_unlock(void *ctx); +int rtl83xx_setup_user_mdio(struct dsa_switch *ds); +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info); +int rtl83xx_register_switch(struct realtek_priv *priv); +void rtl83xx_unregister_switch(struct realtek_priv *priv); +void rtl83xx_shutdown(struct realtek_priv *priv); +void rtl83xx_remove(struct realtek_priv *priv); +void rtl83xx_reset_assert(struct realtek_priv *priv); +void rtl83xx_reset_deassert(struct realtek_priv *priv); + +#endif /* _RTL83XX_H */ |