diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/ethernet/adaptec | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/adaptec')
-rw-r--r-- | drivers/net/ethernet/adaptec/Kconfig | 34 | ||||
-rw-r--r-- | drivers/net/ethernet/adaptec/Makefile | 6 | ||||
-rw-r--r-- | drivers/net/ethernet/adaptec/starfire.c | 2074 |
3 files changed, 2114 insertions, 0 deletions
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig new file mode 100644 index 0000000000..c96edc2e58 --- /dev/null +++ b/drivers/net/ethernet/adaptec/Kconfig @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Adaptec network device configuration +# + +config NET_VENDOR_ADAPTEC + bool "Adaptec devices" + default y + depends on PCI + help + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Adaptec cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_ADAPTEC + +config ADAPTEC_STARFIRE + tristate "Adaptec Starfire/DuraLAN support" + depends on PCI + select CRC32 + select MII + help + Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network + adapter. The DuraLAN chip is used on the 64 bit PCI boards from + Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip + driver. + + To compile this driver as a module, choose M here: the module + will be called starfire. This is recommended. + +endif # NET_VENDOR_ADAPTEC diff --git a/drivers/net/ethernet/adaptec/Makefile b/drivers/net/ethernet/adaptec/Makefile new file mode 100644 index 0000000000..d84138c8a9 --- /dev/null +++ b/drivers/net/ethernet/adaptec/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for the Adaptec network device drivers. +# + +obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o diff --git a/drivers/net/ethernet/adaptec/starfire.c b/drivers/net/ethernet/adaptec/starfire.c new file mode 100644 index 0000000000..857361c74f --- /dev/null +++ b/drivers/net/ethernet/adaptec/starfire.c @@ -0,0 +1,2074 @@ +/* starfire.c: Linux device driver for the Adaptec Starfire network adapter. */ +/* + Written 1998-2000 by Donald Becker. + + Current maintainer is Ion Badulescu <ionut ta badula tod org>. Please + send all bug reports to me, and not to Donald Becker, as this code + has been heavily modified from Donald's original version. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + The information below comes from Donald Becker's original driver: + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support and updates available at + http://www.scyld.com/network/starfire.html + [link no longer provides useful info -jgarzik] + +*/ + +#define DRV_NAME "starfire" + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/crc32.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/if_vlan.h> +#include <linux/mm.h> +#include <linux/firmware.h> +#include <asm/processor.h> /* Processor type for cache alignment. */ +#include <linux/uaccess.h> +#include <asm/io.h> + +/* + * The current frame processor firmware fails to checksum a fragment + * of length 1. If and when this is fixed, the #define below can be removed. + */ +#define HAS_BROKEN_FIRMWARE + +/* + * If using the broken firmware, data must be padded to the next 32-bit boundary. + */ +#ifdef HAS_BROKEN_FIRMWARE +#define PADDING_MASK 3 +#endif + +/* + * Define this if using the driver with the zero-copy patch + */ +#define ZEROCOPY + +#if IS_ENABLED(CONFIG_VLAN_8021Q) +#define VLAN_SUPPORT +#endif + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ + +/* Used for tuning interrupt latency vs. overhead. */ +static int intr_latency; +static int small_frames; + +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ +static int max_interrupt_work = 20; +static int mtu; +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + The Starfire has a 512 element hash table based on the Ethernet CRC. */ +static const int multicast_filter_limit = 512; +/* Whether to do TCP/UDP checksums in hardware */ +static int enable_hw_cksum = 1; + +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ +/* + * Set the copy breakpoint for the copy-only-tiny-frames scheme. + * Setting to > 1518 effectively disables this feature. + * + * NOTE: + * The ia64 doesn't allow for unaligned loads even of integers being + * misaligned on a 2 byte boundary. Thus always force copying of + * packets as the starfire doesn't allow for misaligned DMAs ;-( + * 23/10/2000 - Jes + * + * The Alpha and the Sparc don't like unaligned loads, either. On Sparc64, + * at least, having unaligned frames leads to a rather serious performance + * penalty. -Ion + */ +#if defined(__ia64__) || defined(__alpha__) || defined(__sparc__) +static int rx_copybreak = PKT_BUF_SZ; +#else +static int rx_copybreak /* = 0 */; +#endif + +/* PCI DMA burst size -- on sparc64 we want to force it to 64 bytes, on the others the default of 128 is fine. */ +#ifdef __sparc__ +#define DMA_BURST_SIZE 64 +#else +#define DMA_BURST_SIZE 128 +#endif + +/* Operational parameters that are set at compile time. */ + +/* The "native" ring sizes are either 256 or 2048. + However in some modes a descriptor may be marked to wrap the ring earlier. +*/ +#define RX_RING_SIZE 256 +#define TX_RING_SIZE 32 +/* The completion queues are fixed at 1024 entries i.e. 4K or 8KB. */ +#define DONE_Q_SIZE 1024 +/* All queues must be aligned on a 256-byte boundary */ +#define QUEUE_ALIGN 256 + +#if RX_RING_SIZE > 256 +#define RX_Q_ENTRIES Rx2048QEntries +#else +#define RX_Q_ENTRIES Rx256QEntries +#endif + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2 * HZ) + +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT +/* 64-bit dma_addr_t */ +#define ADDR_64BITS /* This chip uses 64 bit addresses. */ +#define netdrv_addr_t __le64 +#define cpu_to_dma(x) cpu_to_le64(x) +#define dma_to_cpu(x) le64_to_cpu(x) +#define RX_DESC_Q_ADDR_SIZE RxDescQAddr64bit +#define TX_DESC_Q_ADDR_SIZE TxDescQAddr64bit +#define RX_COMPL_Q_ADDR_SIZE RxComplQAddr64bit +#define TX_COMPL_Q_ADDR_SIZE TxComplQAddr64bit +#define RX_DESC_ADDR_SIZE RxDescAddr64bit +#else /* 32-bit dma_addr_t */ +#define netdrv_addr_t __le32 +#define cpu_to_dma(x) cpu_to_le32(x) +#define dma_to_cpu(x) le32_to_cpu(x) +#define RX_DESC_Q_ADDR_SIZE RxDescQAddr32bit +#define TX_DESC_Q_ADDR_SIZE TxDescQAddr32bit +#define RX_COMPL_Q_ADDR_SIZE RxComplQAddr32bit +#define TX_COMPL_Q_ADDR_SIZE TxComplQAddr32bit +#define RX_DESC_ADDR_SIZE RxDescAddr32bit +#endif + +#define skb_first_frag_len(skb) skb_headlen(skb) +#define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1) + +/* Firmware names */ +#define FIRMWARE_RX "adaptec/starfire_rx.bin" +#define FIRMWARE_TX "adaptec/starfire_tx.bin" + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE_RX); +MODULE_FIRMWARE(FIRMWARE_TX); + +module_param(max_interrupt_work, int, 0); +module_param(mtu, int, 0); +module_param(debug, int, 0); +module_param(rx_copybreak, int, 0); +module_param(intr_latency, int, 0); +module_param(small_frames, int, 0); +module_param(enable_hw_cksum, int, 0); +MODULE_PARM_DESC(max_interrupt_work, "Maximum events handled per interrupt"); +MODULE_PARM_DESC(mtu, "MTU (all boards)"); +MODULE_PARM_DESC(debug, "Debug level (0-6)"); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(intr_latency, "Maximum interrupt latency, in microseconds"); +MODULE_PARM_DESC(small_frames, "Maximum size of receive frames that bypass interrupt latency (0,64,128,256,512)"); +MODULE_PARM_DESC(enable_hw_cksum, "Enable/disable hardware cksum support (0/1)"); + +/* + Theory of Operation + +I. Board Compatibility + +This driver is for the Adaptec 6915 "Starfire" 64 bit PCI Ethernet adapter. + +II. Board-specific settings + +III. Driver operation + +IIIa. Ring buffers + +The Starfire hardware uses multiple fixed-size descriptor queues/rings. The +ring sizes are set fixed by the hardware, but may optionally be wrapped +earlier by the END bit in the descriptor. +This driver uses that hardware queue size for the Rx ring, where a large +number of entries has no ill effect beyond increases the potential backlog. +The Tx ring is wrapped with the END bit, since a large hardware Tx queue +disables the queue layer priority ordering and we have no mechanism to +utilize the hardware two-level priority queue. When modifying the +RX/TX_RING_SIZE pay close attention to page sizes and the ring-empty warning +levels. + +IIIb/c. Transmit/Receive Structure + +See the Adaptec manual for the many possible structures, and options for +each structure. There are far too many to document all of them here. + +For transmit this driver uses type 0/1 transmit descriptors (depending +on the 32/64 bitness of the architecture), and relies on automatic +minimum-length padding. It does not use the completion queue +consumer index, but instead checks for non-zero status entries. + +For receive this driver uses type 2/3 receive descriptors. The driver +allocates full frame size skbuffs for the Rx ring buffers, so all frames +should fit in a single descriptor. The driver does not use the completion +queue consumer index, but instead checks for non-zero status entries. + +When an incoming frame is less than RX_COPYBREAK bytes long, a fresh skbuff +is allocated and the frame is copied to the new skbuff. When the incoming +frame is larger, the skbuff is passed directly up the protocol stack. +Buffers consumed this way are replaced by newly allocated skbuffs in a later +phase of receive. + +A notable aspect of operation is that unaligned buffers are not permitted by +the Starfire hardware. Thus the IP header at offset 14 in an ethernet frame +isn't longword aligned, which may cause problems on some machine +e.g. Alphas and IA64. For these architectures, the driver is forced to copy +the frame into a new skbuff unconditionally. Copied frames are put into the +skbuff at an offset of "+2", thus 16-byte aligning the IP header. + +IIId. Synchronization + +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the +dev->tbusy flag. The other thread is the interrupt handler, which is single +threaded by the hardware and interrupt handling software. + +The send packet thread has partial control over the Tx ring and the netif_queue +status. If the number of free Tx slots in the ring falls below a certain number +(currently hardcoded to 4), it signals the upper layer to stop the queue. + +The interrupt handler has exclusive control over the Rx ring and records stats +from the Tx ring. After reaping the stats, it marks the Tx queue entry as +empty by incrementing the dirty_tx mark. Iff the netif_queue is stopped and the +number of free Tx slow is above the threshold, it signals the upper layer to +restart the queue. + +IV. Notes + +IVb. References + +The Adaptec Starfire manuals, available only from Adaptec. +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html + +IVc. Errata + +- StopOnPerr is broken, don't enable +- Hardware ethernet padding exposes random data, perform software padding + instead (unverified -- works correctly for all the hardware I have) + +*/ + + + +enum chip_capability_flags {CanHaveMII=1, }; + +enum chipset { + CH_6915 = 0, +}; + +static const struct pci_device_id starfire_pci_tbl[] = { + { PCI_VDEVICE(ADAPTEC, 0x6915), CH_6915 }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, starfire_pci_tbl); + +/* A chip capabilities table, matching the CH_xxx entries in xxx_pci_tbl[] above. */ +static const struct chip_info { + const char *name; + int drv_flags; +} netdrv_tbl[] = { + { "Adaptec Starfire 6915", CanHaveMII }, +}; + + +/* Offsets to the device registers. + Unlike software-only systems, device drivers interact with complex hardware. + It's not useful to define symbolic names for every register bit in the + device. The name can only partially document the semantics and make + the driver longer and more difficult to read. + In general, only the important configuration values or bits changed + multiple times should be defined symbolically. +*/ +enum register_offsets { + PCIDeviceConfig=0x50040, GenCtrl=0x50070, IntrTimerCtrl=0x50074, + IntrClear=0x50080, IntrStatus=0x50084, IntrEnable=0x50088, + MIICtrl=0x52000, TxStationAddr=0x50120, EEPROMCtrl=0x51000, + GPIOCtrl=0x5008C, TxDescCtrl=0x50090, + TxRingPtr=0x50098, HiPriTxRingPtr=0x50094, /* Low and High priority. */ + TxRingHiAddr=0x5009C, /* 64 bit address extension. */ + TxProducerIdx=0x500A0, TxConsumerIdx=0x500A4, + TxThreshold=0x500B0, + CompletionHiAddr=0x500B4, TxCompletionAddr=0x500B8, + RxCompletionAddr=0x500BC, RxCompletionQ2Addr=0x500C0, + CompletionQConsumerIdx=0x500C4, RxDMACtrl=0x500D0, + RxDescQCtrl=0x500D4, RxDescQHiAddr=0x500DC, RxDescQAddr=0x500E0, + RxDescQIdx=0x500E8, RxDMAStatus=0x500F0, RxFilterMode=0x500F4, + TxMode=0x55000, VlanType=0x55064, + PerfFilterTable=0x56000, HashTable=0x56100, + TxGfpMem=0x58000, RxGfpMem=0x5a000, +}; + +/* + * Bits in the interrupt status/mask registers. + * Warning: setting Intr[Ab]NormalSummary in the IntrEnable register + * enables all the interrupt sources that are or'ed into those status bits. + */ +enum intr_status_bits { + IntrLinkChange=0xf0000000, IntrStatsMax=0x08000000, + IntrAbnormalSummary=0x02000000, IntrGeneralTimer=0x01000000, + IntrSoftware=0x800000, IntrRxComplQ1Low=0x400000, + IntrTxComplQLow=0x200000, IntrPCI=0x100000, + IntrDMAErr=0x080000, IntrTxDataLow=0x040000, + IntrRxComplQ2Low=0x020000, IntrRxDescQ1Low=0x010000, + IntrNormalSummary=0x8000, IntrTxDone=0x4000, + IntrTxDMADone=0x2000, IntrTxEmpty=0x1000, + IntrEarlyRxQ2=0x0800, IntrEarlyRxQ1=0x0400, + IntrRxQ2Done=0x0200, IntrRxQ1Done=0x0100, + IntrRxGFPDead=0x80, IntrRxDescQ2Low=0x40, + IntrNoTxCsum=0x20, IntrTxBadID=0x10, + IntrHiPriTxBadID=0x08, IntrRxGfp=0x04, + IntrTxGfp=0x02, IntrPCIPad=0x01, + /* not quite bits */ + IntrRxDone=IntrRxQ2Done | IntrRxQ1Done, + IntrRxEmpty=IntrRxDescQ1Low | IntrRxDescQ2Low, + IntrNormalMask=0xff00, IntrAbnormalMask=0x3ff00fe, +}; + +/* Bits in the RxFilterMode register. */ +enum rx_mode_bits { + AcceptBroadcast=0x04, AcceptAllMulticast=0x02, AcceptAll=0x01, + AcceptMulticast=0x10, PerfectFilter=0x40, HashFilter=0x30, + PerfectFilterVlan=0x80, MinVLANPrio=0xE000, VlanMode=0x0200, + WakeupOnGFP=0x0800, +}; + +/* Bits in the TxMode register */ +enum tx_mode_bits { + MiiSoftReset=0x8000, MIILoopback=0x4000, + TxFlowEnable=0x0800, RxFlowEnable=0x0400, + PadEnable=0x04, FullDuplex=0x02, HugeFrame=0x01, +}; + +/* Bits in the TxDescCtrl register. */ +enum tx_ctrl_bits { + TxDescSpaceUnlim=0x00, TxDescSpace32=0x10, TxDescSpace64=0x20, + TxDescSpace128=0x30, TxDescSpace256=0x40, + TxDescType0=0x00, TxDescType1=0x01, TxDescType2=0x02, + TxDescType3=0x03, TxDescType4=0x04, + TxNoDMACompletion=0x08, + TxDescQAddr64bit=0x80, TxDescQAddr32bit=0, + TxHiPriFIFOThreshShift=24, TxPadLenShift=16, + TxDMABurstSizeShift=8, +}; + +/* Bits in the RxDescQCtrl register. */ +enum rx_ctrl_bits { + RxBufferLenShift=16, RxMinDescrThreshShift=0, + RxPrefetchMode=0x8000, RxVariableQ=0x2000, + Rx2048QEntries=0x4000, Rx256QEntries=0, + RxDescAddr64bit=0x1000, RxDescAddr32bit=0, + RxDescQAddr64bit=0x0100, RxDescQAddr32bit=0, + RxDescSpace4=0x000, RxDescSpace8=0x100, + RxDescSpace16=0x200, RxDescSpace32=0x300, + RxDescSpace64=0x400, RxDescSpace128=0x500, + RxConsumerWrEn=0x80, +}; + +/* Bits in the RxDMACtrl register. */ +enum rx_dmactrl_bits { + RxReportBadFrames=0x80000000, RxDMAShortFrames=0x40000000, + RxDMABadFrames=0x20000000, RxDMACrcErrorFrames=0x10000000, + RxDMAControlFrame=0x08000000, RxDMAPauseFrame=0x04000000, + RxChecksumIgnore=0, RxChecksumRejectTCPUDP=0x02000000, + RxChecksumRejectTCPOnly=0x01000000, + RxCompletionQ2Enable=0x800000, + RxDMAQ2Disable=0, RxDMAQ2FPOnly=0x100000, + RxDMAQ2SmallPkt=0x200000, RxDMAQ2HighPrio=0x300000, + RxDMAQ2NonIP=0x400000, + RxUseBackupQueue=0x080000, RxDMACRC=0x040000, + RxEarlyIntThreshShift=12, RxHighPrioThreshShift=8, + RxBurstSizeShift=0, +}; + +/* Bits in the RxCompletionAddr register */ +enum rx_compl_bits { + RxComplQAddr64bit=0x80, RxComplQAddr32bit=0, + RxComplProducerWrEn=0x40, + RxComplType0=0x00, RxComplType1=0x10, + RxComplType2=0x20, RxComplType3=0x30, + RxComplThreshShift=0, +}; + +/* Bits in the TxCompletionAddr register */ +enum tx_compl_bits { + TxComplQAddr64bit=0x80, TxComplQAddr32bit=0, + TxComplProducerWrEn=0x40, + TxComplIntrStatus=0x20, + CommonQueueMode=0x10, + TxComplThreshShift=0, +}; + +/* Bits in the GenCtrl register */ +enum gen_ctrl_bits { + RxEnable=0x05, TxEnable=0x0a, + RxGFPEnable=0x10, TxGFPEnable=0x20, +}; + +/* Bits in the IntrTimerCtrl register */ +enum intr_ctrl_bits { + Timer10X=0x800, EnableIntrMasking=0x60, SmallFrameBypass=0x100, + SmallFrame64=0, SmallFrame128=0x200, SmallFrame256=0x400, SmallFrame512=0x600, + IntrLatencyMask=0x1f, +}; + +/* The Rx and Tx buffer descriptors. */ +struct starfire_rx_desc { + netdrv_addr_t rxaddr; +}; +enum rx_desc_bits { + RxDescValid=1, RxDescEndRing=2, +}; + +/* Completion queue entry. */ +struct short_rx_done_desc { + __le32 status; /* Low 16 bits is length. */ +}; +struct basic_rx_done_desc { + __le32 status; /* Low 16 bits is length. */ + __le16 vlanid; + __le16 status2; +}; +struct csum_rx_done_desc { + __le32 status; /* Low 16 bits is length. */ + __le16 csum; /* Partial checksum */ + __le16 status2; +}; +struct full_rx_done_desc { + __le32 status; /* Low 16 bits is length. */ + __le16 status3; + __le16 status2; + __le16 vlanid; + __le16 csum; /* partial checksum */ + __le32 timestamp; +}; +/* XXX: this is ugly and I'm not sure it's worth the trouble -Ion */ +#ifdef VLAN_SUPPORT +typedef struct full_rx_done_desc rx_done_desc; +#define RxComplType RxComplType3 +#else /* not VLAN_SUPPORT */ +typedef struct csum_rx_done_desc rx_done_desc; +#define RxComplType RxComplType2 +#endif /* not VLAN_SUPPORT */ + +enum rx_done_bits { + RxOK=0x20000000, RxFIFOErr=0x10000000, RxBufQ2=0x08000000, +}; + +/* Type 1 Tx descriptor. */ +struct starfire_tx_desc_1 { + __le32 status; /* Upper bits are status, lower 16 length. */ + __le32 addr; +}; + +/* Type 2 Tx descriptor. */ +struct starfire_tx_desc_2 { + __le32 status; /* Upper bits are status, lower 16 length. */ + __le32 reserved; + __le64 addr; +}; + +#ifdef ADDR_64BITS +typedef struct starfire_tx_desc_2 starfire_tx_desc; +#define TX_DESC_TYPE TxDescType2 +#else /* not ADDR_64BITS */ +typedef struct starfire_tx_desc_1 starfire_tx_desc; +#define TX_DESC_TYPE TxDescType1 +#endif /* not ADDR_64BITS */ +#define TX_DESC_SPACING TxDescSpaceUnlim + +enum tx_desc_bits { + TxDescID=0xB0000000, + TxCRCEn=0x01000000, TxDescIntr=0x08000000, + TxRingWrap=0x04000000, TxCalTCP=0x02000000, +}; +struct tx_done_desc { + __le32 status; /* timestamp, index. */ +#if 0 + __le32 intrstatus; /* interrupt status */ +#endif +}; + +struct rx_ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; +struct tx_ring_info { + struct sk_buff *skb; + dma_addr_t mapping; + unsigned int used_slots; +}; + +#define PHY_CNT 2 +struct netdev_private { + /* Descriptor rings first for alignment. */ + struct starfire_rx_desc *rx_ring; + starfire_tx_desc *tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + /* The addresses of rx/tx-in-place skbuffs. */ + struct rx_ring_info rx_info[RX_RING_SIZE]; + struct tx_ring_info tx_info[TX_RING_SIZE]; + /* Pointers to completion queues (full pages). */ + rx_done_desc *rx_done_q; + dma_addr_t rx_done_q_dma; + unsigned int rx_done; + struct tx_done_desc *tx_done_q; + dma_addr_t tx_done_q_dma; + unsigned int tx_done; + struct napi_struct napi; + struct net_device *dev; + struct pci_dev *pci_dev; +#ifdef VLAN_SUPPORT + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; +#endif + void *queue_mem; + dma_addr_t queue_mem_dma; + size_t queue_mem_size; + + /* Frequently used values: keep some adjacent for cache effect. */ + spinlock_t lock; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int cur_tx, dirty_tx, reap_tx; + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + /* These values keep track of the transceiver/media in use. */ + int speed100; /* Set if speed == 100MBit. */ + u32 tx_mode; + u32 intr_timer_ctrl; + u8 tx_threshold; + /* MII transceiver section. */ + struct mii_if_info mii_if; /* MII lib hooks/info */ + int phy_cnt; /* MII device addresses. */ + unsigned char phys[PHY_CNT]; /* MII device addresses. */ + void __iomem *base; +}; + + +static int mdio_read(struct net_device *dev, int phy_id, int location); +static void mdio_write(struct net_device *dev, int phy_id, int location, int value); +static int netdev_open(struct net_device *dev); +static void check_duplex(struct net_device *dev); +static void tx_timeout(struct net_device *dev, unsigned int txqueue); +static void init_ring(struct net_device *dev); +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t intr_handler(int irq, void *dev_instance); +static void netdev_error(struct net_device *dev, int intr_status); +static int __netdev_rx(struct net_device *dev, int *quota); +static int netdev_poll(struct napi_struct *napi, int budget); +static void refill_rx_ring(struct net_device *dev); +static void netdev_error(struct net_device *dev, int intr_status); +static void set_rx_mode(struct net_device *dev); +static struct net_device_stats *get_stats(struct net_device *dev); +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int netdev_close(struct net_device *dev); +static void netdev_media_change(struct net_device *dev); +static const struct ethtool_ops ethtool_ops; + + +#ifdef VLAN_SUPPORT +static int netdev_vlan_rx_add_vid(struct net_device *dev, + __be16 proto, u16 vid) +{ + struct netdev_private *np = netdev_priv(dev); + + spin_lock(&np->lock); + if (debug > 1) + printk("%s: Adding vlanid %d to vlan filter\n", dev->name, vid); + set_bit(vid, np->active_vlans); + set_rx_mode(dev); + spin_unlock(&np->lock); + + return 0; +} + +static int netdev_vlan_rx_kill_vid(struct net_device *dev, + __be16 proto, u16 vid) +{ + struct netdev_private *np = netdev_priv(dev); + + spin_lock(&np->lock); + if (debug > 1) + printk("%s: removing vlanid %d from vlan filter\n", dev->name, vid); + clear_bit(vid, np->active_vlans); + set_rx_mode(dev); + spin_unlock(&np->lock); + + return 0; +} +#endif /* VLAN_SUPPORT */ + + +static const struct net_device_ops netdev_ops = { + .ndo_open = netdev_open, + .ndo_stop = netdev_close, + .ndo_start_xmit = start_tx, + .ndo_tx_timeout = tx_timeout, + .ndo_get_stats = get_stats, + .ndo_set_rx_mode = set_rx_mode, + .ndo_eth_ioctl = netdev_ioctl, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef VLAN_SUPPORT + .ndo_vlan_rx_add_vid = netdev_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = netdev_vlan_rx_kill_vid, +#endif +}; + +static int starfire_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct device *d = &pdev->dev; + struct netdev_private *np; + int i, irq, chip_idx = ent->driver_data; + struct net_device *dev; + u8 addr[ETH_ALEN]; + long ioaddr; + void __iomem *base; + int drv_flags, io_size; + int boguscnt; + + if (pci_enable_device (pdev)) + return -EIO; + + ioaddr = pci_resource_start(pdev, 0); + io_size = pci_resource_len(pdev, 0); + if (!ioaddr || ((pci_resource_flags(pdev, 0) & IORESOURCE_MEM) == 0)) { + dev_err(d, "no PCI MEM resources, aborting\n"); + return -ENODEV; + } + + dev = alloc_etherdev(sizeof(*np)); + if (!dev) + return -ENOMEM; + + SET_NETDEV_DEV(dev, &pdev->dev); + + irq = pdev->irq; + + if (pci_request_regions (pdev, DRV_NAME)) { + dev_err(d, "cannot reserve PCI resources, aborting\n"); + goto err_out_free_netdev; + } + + base = ioremap(ioaddr, io_size); + if (!base) { + dev_err(d, "cannot remap %#x @ %#lx, aborting\n", + io_size, ioaddr); + goto err_out_free_res; + } + + pci_set_master(pdev); + + /* enable MWI -- it vastly improves Rx performance on sparc64 */ + pci_try_set_mwi(pdev); + +#ifdef ZEROCOPY + /* Starfire can do TCP/UDP checksumming */ + if (enable_hw_cksum) + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; +#endif /* ZEROCOPY */ + +#ifdef VLAN_SUPPORT + dev->features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; +#endif /* VLAN_RX_KILL_VID */ +#ifdef ADDR_64BITS + dev->features |= NETIF_F_HIGHDMA; +#endif /* ADDR_64BITS */ + + /* Serial EEPROM reads are hidden by the hardware. */ + for (i = 0; i < 6; i++) + addr[i] = readb(base + EEPROMCtrl + 20 - i); + eth_hw_addr_set(dev, addr); + +#if ! defined(final_version) /* Dump the EEPROM contents during development. */ + if (debug > 4) + for (i = 0; i < 0x20; i++) + printk("%2.2x%s", + (unsigned int)readb(base + EEPROMCtrl + i), + i % 16 != 15 ? " " : "\n"); +#endif + + /* Issue soft reset */ + writel(MiiSoftReset, base + TxMode); + udelay(1000); + writel(0, base + TxMode); + + /* Reset the chip to erase previous misconfiguration. */ + writel(1, base + PCIDeviceConfig); + boguscnt = 1000; + while (--boguscnt > 0) { + udelay(10); + if ((readl(base + PCIDeviceConfig) & 1) == 0) + break; + } + if (boguscnt == 0) + printk("%s: chipset reset never completed!\n", dev->name); + /* wait a little longer */ + udelay(1000); + + np = netdev_priv(dev); + np->dev = dev; + np->base = base; + spin_lock_init(&np->lock); + pci_set_drvdata(pdev, dev); + + np->pci_dev = pdev; + + np->mii_if.dev = dev; + np->mii_if.mdio_read = mdio_read; + np->mii_if.mdio_write = mdio_write; + np->mii_if.phy_id_mask = 0x1f; + np->mii_if.reg_num_mask = 0x1f; + + drv_flags = netdrv_tbl[chip_idx].drv_flags; + + np->speed100 = 1; + + /* timer resolution is 128 * 0.8us */ + np->intr_timer_ctrl = (((intr_latency * 10) / 1024) & IntrLatencyMask) | + Timer10X | EnableIntrMasking; + + if (small_frames > 0) { + np->intr_timer_ctrl |= SmallFrameBypass; + switch (small_frames) { + case 1 ... 64: + np->intr_timer_ctrl |= SmallFrame64; + break; + case 65 ... 128: + np->intr_timer_ctrl |= SmallFrame128; + break; + case 129 ... 256: + np->intr_timer_ctrl |= SmallFrame256; + break; + default: + np->intr_timer_ctrl |= SmallFrame512; + if (small_frames > 512) + printk("Adjusting small_frames down to 512\n"); + break; + } + } + + dev->netdev_ops = &netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + dev->ethtool_ops = ðtool_ops; + + netif_napi_add_weight(dev, &np->napi, netdev_poll, max_interrupt_work); + + if (mtu) + dev->mtu = mtu; + + if (register_netdev(dev)) + goto err_out_cleardev; + + printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", + dev->name, netdrv_tbl[chip_idx].name, base, + dev->dev_addr, irq); + + if (drv_flags & CanHaveMII) { + int phy, phy_idx = 0; + int mii_status; + for (phy = 0; phy < 32 && phy_idx < PHY_CNT; phy++) { + mdio_write(dev, phy, MII_BMCR, BMCR_RESET); + msleep(100); + boguscnt = 1000; + while (--boguscnt > 0) + if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0) + break; + if (boguscnt == 0) { + printk("%s: PHY#%d reset never completed!\n", dev->name, phy); + continue; + } + mii_status = mdio_read(dev, phy, MII_BMSR); + if (mii_status != 0) { + np->phys[phy_idx++] = phy; + np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); + printk(KERN_INFO "%s: MII PHY found at address %d, status " + "%#4.4x advertising %#4.4x.\n", + dev->name, phy, mii_status, np->mii_if.advertising); + /* there can be only one PHY on-board */ + break; + } + } + np->phy_cnt = phy_idx; + if (np->phy_cnt > 0) + np->mii_if.phy_id = np->phys[0]; + else + memset(&np->mii_if, 0, sizeof(np->mii_if)); + } + + printk(KERN_INFO "%s: scatter-gather and hardware TCP cksumming %s.\n", + dev->name, enable_hw_cksum ? "enabled" : "disabled"); + return 0; + +err_out_cleardev: + iounmap(base); +err_out_free_res: + pci_release_regions (pdev); +err_out_free_netdev: + free_netdev(dev); + return -ENODEV; +} + + +/* Read the MII Management Data I/O (MDIO) interfaces. */ +static int mdio_read(struct net_device *dev, int phy_id, int location) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2); + int result, boguscnt=1000; + /* ??? Should we add a busy-wait here? */ + do { + result = readl(mdio_addr); + } while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0); + if (boguscnt == 0) + return 0; + if ((result & 0xffff) == 0xffff) + return 0; + return result & 0xffff; +} + + +static void mdio_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2); + writel(value, mdio_addr); + /* The busy-wait will occur before a read. */ +} + + +static int netdev_open(struct net_device *dev) +{ + const struct firmware *fw_rx, *fw_tx; + const __be32 *fw_rx_data, *fw_tx_data; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + const int irq = np->pci_dev->irq; + int i, retval; + size_t tx_size, rx_size; + size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size; + + /* Do we ever need to reset the chip??? */ + + retval = request_irq(irq, intr_handler, IRQF_SHARED, dev->name, dev); + if (retval) + return retval; + + /* Disable the Rx and Tx, and reset the chip. */ + writel(0, ioaddr + GenCtrl); + writel(1, ioaddr + PCIDeviceConfig); + if (debug > 1) + printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", + dev->name, irq); + + /* Allocate the various queues. */ + if (!np->queue_mem) { + tx_done_q_size = ((sizeof(struct tx_done_desc) * DONE_Q_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; + rx_done_q_size = ((sizeof(rx_done_desc) * DONE_Q_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; + tx_ring_size = ((sizeof(starfire_tx_desc) * TX_RING_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; + rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE; + np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size; + np->queue_mem = dma_alloc_coherent(&np->pci_dev->dev, + np->queue_mem_size, + &np->queue_mem_dma, GFP_ATOMIC); + if (np->queue_mem == NULL) { + free_irq(irq, dev); + return -ENOMEM; + } + + np->tx_done_q = np->queue_mem; + np->tx_done_q_dma = np->queue_mem_dma; + np->rx_done_q = (void *) np->tx_done_q + tx_done_q_size; + np->rx_done_q_dma = np->tx_done_q_dma + tx_done_q_size; + np->tx_ring = (void *) np->rx_done_q + rx_done_q_size; + np->tx_ring_dma = np->rx_done_q_dma + rx_done_q_size; + np->rx_ring = (void *) np->tx_ring + tx_ring_size; + np->rx_ring_dma = np->tx_ring_dma + tx_ring_size; + } + + /* Start with no carrier, it gets adjusted later */ + netif_carrier_off(dev); + init_ring(dev); + /* Set the size of the Rx buffers. */ + writel((np->rx_buf_sz << RxBufferLenShift) | + (0 << RxMinDescrThreshShift) | + RxPrefetchMode | RxVariableQ | + RX_Q_ENTRIES | + RX_DESC_Q_ADDR_SIZE | RX_DESC_ADDR_SIZE | + RxDescSpace4, + ioaddr + RxDescQCtrl); + + /* Set up the Rx DMA controller. */ + writel(RxChecksumIgnore | + (0 << RxEarlyIntThreshShift) | + (6 << RxHighPrioThreshShift) | + ((DMA_BURST_SIZE / 32) << RxBurstSizeShift), + ioaddr + RxDMACtrl); + + /* Set Tx descriptor */ + writel((2 << TxHiPriFIFOThreshShift) | + (0 << TxPadLenShift) | + ((DMA_BURST_SIZE / 32) << TxDMABurstSizeShift) | + TX_DESC_Q_ADDR_SIZE | + TX_DESC_SPACING | TX_DESC_TYPE, + ioaddr + TxDescCtrl); + + writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + RxDescQHiAddr); + writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + TxRingHiAddr); + writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + CompletionHiAddr); + writel(np->rx_ring_dma, ioaddr + RxDescQAddr); + writel(np->tx_ring_dma, ioaddr + TxRingPtr); + + writel(np->tx_done_q_dma, ioaddr + TxCompletionAddr); + writel(np->rx_done_q_dma | + RxComplType | + (0 << RxComplThreshShift), + ioaddr + RxCompletionAddr); + + if (debug > 1) + printk(KERN_DEBUG "%s: Filling in the station address.\n", dev->name); + + /* Fill both the Tx SA register and the Rx perfect filter. */ + for (i = 0; i < 6; i++) + writeb(dev->dev_addr[i], ioaddr + TxStationAddr + 5 - i); + /* The first entry is special because it bypasses the VLAN filter. + Don't use it. */ + writew(0, ioaddr + PerfFilterTable); + writew(0, ioaddr + PerfFilterTable + 4); + writew(0, ioaddr + PerfFilterTable + 8); + for (i = 1; i < 16; i++) { + const __be16 *eaddrs = (const __be16 *)dev->dev_addr; + void __iomem *setup_frm = ioaddr + PerfFilterTable + i * 16; + writew(be16_to_cpu(eaddrs[2]), setup_frm); setup_frm += 4; + writew(be16_to_cpu(eaddrs[1]), setup_frm); setup_frm += 4; + writew(be16_to_cpu(eaddrs[0]), setup_frm); setup_frm += 8; + } + + /* Initialize other registers. */ + /* Configure the PCI bus bursts and FIFO thresholds. */ + np->tx_mode = TxFlowEnable|RxFlowEnable|PadEnable; /* modified when link is up. */ + writel(MiiSoftReset | np->tx_mode, ioaddr + TxMode); + udelay(1000); + writel(np->tx_mode, ioaddr + TxMode); + np->tx_threshold = 4; + writel(np->tx_threshold, ioaddr + TxThreshold); + + writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl); + + napi_enable(&np->napi); + + netif_start_queue(dev); + + if (debug > 1) + printk(KERN_DEBUG "%s: Setting the Rx and Tx modes.\n", dev->name); + set_rx_mode(dev); + + np->mii_if.advertising = mdio_read(dev, np->phys[0], MII_ADVERTISE); + check_duplex(dev); + + /* Enable GPIO interrupts on link change */ + writel(0x0f00ff00, ioaddr + GPIOCtrl); + + /* Set the interrupt mask */ + writel(IntrRxDone | IntrRxEmpty | IntrDMAErr | + IntrTxDMADone | IntrStatsMax | IntrLinkChange | + IntrRxGFPDead | IntrNoTxCsum | IntrTxBadID, + ioaddr + IntrEnable); + /* Enable PCI interrupts. */ + writel(0x00800000 | readl(ioaddr + PCIDeviceConfig), + ioaddr + PCIDeviceConfig); + +#ifdef VLAN_SUPPORT + /* Set VLAN type to 802.1q */ + writel(ETH_P_8021Q, ioaddr + VlanType); +#endif /* VLAN_SUPPORT */ + + retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev); + if (retval) { + printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", + FIRMWARE_RX); + goto out_init; + } + if (fw_rx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_rx->size, FIRMWARE_RX); + retval = -EINVAL; + goto out_rx; + } + retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev); + if (retval) { + printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", + FIRMWARE_TX); + goto out_rx; + } + if (fw_tx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_tx->size, FIRMWARE_TX); + retval = -EINVAL; + goto out_tx; + } + fw_rx_data = (const __be32 *)&fw_rx->data[0]; + fw_tx_data = (const __be32 *)&fw_tx->data[0]; + rx_size = fw_rx->size / 4; + tx_size = fw_tx->size / 4; + + /* Load Rx/Tx firmware into the frame processors */ + for (i = 0; i < rx_size; i++) + writel(be32_to_cpup(&fw_rx_data[i]), ioaddr + RxGfpMem + i * 4); + for (i = 0; i < tx_size; i++) + writel(be32_to_cpup(&fw_tx_data[i]), ioaddr + TxGfpMem + i * 4); + if (enable_hw_cksum) + /* Enable the Rx and Tx units, and the Rx/Tx frame processors. */ + writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl); + else + /* Enable the Rx and Tx units only. */ + writel(TxEnable|RxEnable, ioaddr + GenCtrl); + + if (debug > 1) + printk(KERN_DEBUG "%s: Done netdev_open().\n", + dev->name); + +out_tx: + release_firmware(fw_tx); +out_rx: + release_firmware(fw_rx); +out_init: + if (retval) + netdev_close(dev); + return retval; +} + + +static void check_duplex(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + u16 reg0; + int silly_count = 1000; + + mdio_write(dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising); + mdio_write(dev, np->phys[0], MII_BMCR, BMCR_RESET); + udelay(500); + while (--silly_count && mdio_read(dev, np->phys[0], MII_BMCR) & BMCR_RESET) + /* do nothing */; + if (!silly_count) { + printk("%s: MII reset failed!\n", dev->name); + return; + } + + reg0 = mdio_read(dev, np->phys[0], MII_BMCR); + + if (!np->mii_if.force_media) { + reg0 |= BMCR_ANENABLE | BMCR_ANRESTART; + } else { + reg0 &= ~(BMCR_ANENABLE | BMCR_ANRESTART); + if (np->speed100) + reg0 |= BMCR_SPEED100; + if (np->mii_if.full_duplex) + reg0 |= BMCR_FULLDPLX; + printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n", + dev->name, + np->speed100 ? "100" : "10", + np->mii_if.full_duplex ? "full" : "half"); + } + mdio_write(dev, np->phys[0], MII_BMCR, reg0); +} + + +static void tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + int old_debug; + + printk(KERN_WARNING "%s: Transmit timed out, status %#8.8x, " + "resetting...\n", dev->name, (int) readl(ioaddr + IntrStatus)); + + /* Perhaps we should reinitialize the hardware here. */ + + /* + * Stop and restart the interface. + * Cheat and increase the debug level temporarily. + */ + old_debug = debug; + debug = 2; + netdev_close(dev); + netdev_open(dev); + debug = old_debug; + + /* Trigger an immediate transmit demand. */ + + netif_trans_update(dev); /* prevent tx timeout */ + dev->stats.tx_errors++; + netif_wake_queue(dev); +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void init_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + np->cur_rx = np->cur_tx = np->reap_tx = 0; + np->dirty_rx = np->dirty_tx = np->rx_done = np->tx_done = 0; + + np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); + + /* Fill in the Rx buffers. Handle allocation failure gracefully. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = netdev_alloc_skb(dev, np->rx_buf_sz); + np->rx_info[i].skb = skb; + if (skb == NULL) + break; + np->rx_info[i].mapping = dma_map_single(&np->pci_dev->dev, + skb->data, + np->rx_buf_sz, + DMA_FROM_DEVICE); + if (dma_mapping_error(&np->pci_dev->dev, np->rx_info[i].mapping)) { + dev_kfree_skb(skb); + np->rx_info[i].skb = NULL; + break; + } + /* Grrr, we cannot offset to correctly align the IP header. */ + np->rx_ring[i].rxaddr = cpu_to_dma(np->rx_info[i].mapping | RxDescValid); + } + writew(i - 1, np->base + RxDescQIdx); + np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + /* Clear the remainder of the Rx buffer ring. */ + for ( ; i < RX_RING_SIZE; i++) { + np->rx_ring[i].rxaddr = 0; + np->rx_info[i].skb = NULL; + np->rx_info[i].mapping = 0; + } + /* Mark the last entry as wrapping the ring. */ + np->rx_ring[RX_RING_SIZE - 1].rxaddr |= cpu_to_dma(RxDescEndRing); + + /* Clear the completion rings. */ + for (i = 0; i < DONE_Q_SIZE; i++) { + np->rx_done_q[i].status = 0; + np->tx_done_q[i].status = 0; + } + + for (i = 0; i < TX_RING_SIZE; i++) + memset(&np->tx_info[i], 0, sizeof(np->tx_info[i])); +} + + +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + unsigned int entry; + unsigned int prev_tx; + u32 status; + int i, j; + + /* + * be cautious here, wrapping the queue has weird semantics + * and we may not have enough slots even when it seems we do. + */ + if ((np->cur_tx - np->dirty_tx) + skb_num_frags(skb) * 2 > TX_RING_SIZE) { + netif_stop_queue(dev); + return NETDEV_TX_BUSY; + } + +#if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE) + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (skb_padto(skb, (skb->len + PADDING_MASK) & ~PADDING_MASK)) + return NETDEV_TX_OK; + } +#endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ + + prev_tx = np->cur_tx; + entry = np->cur_tx % TX_RING_SIZE; + for (i = 0; i < skb_num_frags(skb); i++) { + int wrap_ring = 0; + status = TxDescID; + + if (i == 0) { + np->tx_info[entry].skb = skb; + status |= TxCRCEn; + if (entry >= TX_RING_SIZE - skb_num_frags(skb)) { + status |= TxRingWrap; + wrap_ring = 1; + } + if (np->reap_tx) { + status |= TxDescIntr; + np->reap_tx = 0; + } + if (skb->ip_summed == CHECKSUM_PARTIAL) { + status |= TxCalTCP; + dev->stats.tx_compressed++; + } + status |= skb_first_frag_len(skb) | (skb_num_frags(skb) << 16); + + np->tx_info[entry].mapping = + dma_map_single(&np->pci_dev->dev, skb->data, + skb_first_frag_len(skb), + DMA_TO_DEVICE); + } else { + const skb_frag_t *this_frag = &skb_shinfo(skb)->frags[i - 1]; + status |= skb_frag_size(this_frag); + np->tx_info[entry].mapping = + dma_map_single(&np->pci_dev->dev, + skb_frag_address(this_frag), + skb_frag_size(this_frag), + DMA_TO_DEVICE); + } + if (dma_mapping_error(&np->pci_dev->dev, np->tx_info[entry].mapping)) { + dev->stats.tx_dropped++; + goto err_out; + } + + np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping); + np->tx_ring[entry].status = cpu_to_le32(status); + if (debug > 3) + printk(KERN_DEBUG "%s: Tx #%d/#%d slot %d status %#8.8x.\n", + dev->name, np->cur_tx, np->dirty_tx, + entry, status); + if (wrap_ring) { + np->tx_info[entry].used_slots = TX_RING_SIZE - entry; + np->cur_tx += np->tx_info[entry].used_slots; + entry = 0; + } else { + np->tx_info[entry].used_slots = 1; + np->cur_tx += np->tx_info[entry].used_slots; + entry++; + } + /* scavenge the tx descriptors twice per TX_RING_SIZE */ + if (np->cur_tx % (TX_RING_SIZE / 2) == 0) + np->reap_tx = 1; + } + + /* Non-x86: explicitly flush descriptor cache lines here. */ + /* Ensure all descriptors are written back before the transmit is + initiated. - Jes */ + wmb(); + + /* Update the producer index. */ + writel(entry * (sizeof(starfire_tx_desc) / 8), np->base + TxProducerIdx); + + /* 4 is arbitrary, but should be ok */ + if ((np->cur_tx - np->dirty_tx) + 4 > TX_RING_SIZE) + netif_stop_queue(dev); + + return NETDEV_TX_OK; + +err_out: + entry = prev_tx % TX_RING_SIZE; + np->tx_info[entry].skb = NULL; + if (i > 0) { + dma_unmap_single(&np->pci_dev->dev, + np->tx_info[entry].mapping, + skb_first_frag_len(skb), DMA_TO_DEVICE); + np->tx_info[entry].mapping = 0; + entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE; + for (j = 1; j < i; j++) { + dma_unmap_single(&np->pci_dev->dev, + np->tx_info[entry].mapping, + skb_frag_size(&skb_shinfo(skb)->frags[j - 1]), + DMA_TO_DEVICE); + entry++; + } + } + dev_kfree_skb_any(skb); + np->cur_tx = prev_tx; + return NETDEV_TX_OK; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static irqreturn_t intr_handler(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + int boguscnt = max_interrupt_work; + int consumer; + int tx_status; + int handled = 0; + + do { + u32 intr_status = readl(ioaddr + IntrClear); + + if (debug > 4) + printk(KERN_DEBUG "%s: Interrupt status %#8.8x.\n", + dev->name, intr_status); + + if (intr_status == 0 || intr_status == (u32) -1) + break; + + handled = 1; + + if (intr_status & (IntrRxDone | IntrRxEmpty)) { + u32 enable; + + if (likely(napi_schedule_prep(&np->napi))) { + __napi_schedule(&np->napi); + enable = readl(ioaddr + IntrEnable); + enable &= ~(IntrRxDone | IntrRxEmpty); + writel(enable, ioaddr + IntrEnable); + /* flush PCI posting buffers */ + readl(ioaddr + IntrEnable); + } else { + /* Paranoia check */ + enable = readl(ioaddr + IntrEnable); + if (enable & (IntrRxDone | IntrRxEmpty)) { + printk(KERN_INFO + "%s: interrupt while in poll!\n", + dev->name); + enable &= ~(IntrRxDone | IntrRxEmpty); + writel(enable, ioaddr + IntrEnable); + } + } + } + + /* Scavenge the skbuff list based on the Tx-done queue. + There are redundant checks here that may be cleaned up + after the driver has proven to be reliable. */ + consumer = readl(ioaddr + TxConsumerIdx); + if (debug > 3) + printk(KERN_DEBUG "%s: Tx Consumer index is %d.\n", + dev->name, consumer); + + while ((tx_status = le32_to_cpu(np->tx_done_q[np->tx_done].status)) != 0) { + if (debug > 3) + printk(KERN_DEBUG "%s: Tx completion #%d entry %d is %#8.8x.\n", + dev->name, np->dirty_tx, np->tx_done, tx_status); + if ((tx_status & 0xe0000000) == 0xa0000000) { + dev->stats.tx_packets++; + } else if ((tx_status & 0xe0000000) == 0x80000000) { + u16 entry = (tx_status & 0x7fff) / sizeof(starfire_tx_desc); + struct sk_buff *skb = np->tx_info[entry].skb; + np->tx_info[entry].skb = NULL; + dma_unmap_single(&np->pci_dev->dev, + np->tx_info[entry].mapping, + skb_first_frag_len(skb), + DMA_TO_DEVICE); + np->tx_info[entry].mapping = 0; + np->dirty_tx += np->tx_info[entry].used_slots; + entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE; + { + int i; + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + dma_unmap_single(&np->pci_dev->dev, + np->tx_info[entry].mapping, + skb_frag_size(&skb_shinfo(skb)->frags[i]), + DMA_TO_DEVICE); + np->dirty_tx++; + entry++; + } + } + + dev_consume_skb_irq(skb); + } + np->tx_done_q[np->tx_done].status = 0; + np->tx_done = (np->tx_done + 1) % DONE_Q_SIZE; + } + writew(np->tx_done, ioaddr + CompletionQConsumerIdx + 2); + + if (netif_queue_stopped(dev) && + (np->cur_tx - np->dirty_tx + 4 < TX_RING_SIZE)) { + /* The ring is no longer full, wake the queue. */ + netif_wake_queue(dev); + } + + /* Stats overflow */ + if (intr_status & IntrStatsMax) + get_stats(dev); + + /* Media change interrupt. */ + if (intr_status & IntrLinkChange) + netdev_media_change(dev); + + /* Abnormal error summary/uncommon events handlers. */ + if (intr_status & IntrAbnormalSummary) + netdev_error(dev, intr_status); + + if (--boguscnt < 0) { + if (debug > 1) + printk(KERN_WARNING "%s: Too much work at interrupt, " + "status=%#8.8x.\n", + dev->name, intr_status); + break; + } + } while (1); + + if (debug > 4) + printk(KERN_DEBUG "%s: exiting interrupt, status=%#8.8x.\n", + dev->name, (int) readl(ioaddr + IntrStatus)); + return IRQ_RETVAL(handled); +} + + +/* + * This routine is logically part of the interrupt/poll handler, but separated + * for clarity and better register allocation. + */ +static int __netdev_rx(struct net_device *dev, int *quota) +{ + struct netdev_private *np = netdev_priv(dev); + u32 desc_status; + int retcode = 0; + + /* If EOP is set on the next entry, it's a new packet. Send it up. */ + while ((desc_status = le32_to_cpu(np->rx_done_q[np->rx_done].status)) != 0) { + struct sk_buff *skb; + u16 pkt_len; + int entry; + rx_done_desc *desc = &np->rx_done_q[np->rx_done]; + + if (debug > 4) + printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status); + if (!(desc_status & RxOK)) { + /* There was an error. */ + if (debug > 2) + printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status); + dev->stats.rx_errors++; + if (desc_status & RxFIFOErr) + dev->stats.rx_fifo_errors++; + goto next_rx; + } + + if (*quota <= 0) { /* out of rx quota */ + retcode = 1; + goto out; + } + (*quota)--; + + pkt_len = desc_status; /* Implicitly Truncate */ + entry = (desc_status >> 16) & 0x7ff; + + if (debug > 4) + printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d, quota %d.\n", pkt_len, *quota); + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak && + (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* 16 byte align the IP header */ + dma_sync_single_for_cpu(&np->pci_dev->dev, + np->rx_info[entry].mapping, + pkt_len, DMA_FROM_DEVICE); + skb_copy_to_linear_data(skb, np->rx_info[entry].skb->data, pkt_len); + dma_sync_single_for_device(&np->pci_dev->dev, + np->rx_info[entry].mapping, + pkt_len, DMA_FROM_DEVICE); + skb_put(skb, pkt_len); + } else { + dma_unmap_single(&np->pci_dev->dev, + np->rx_info[entry].mapping, + np->rx_buf_sz, DMA_FROM_DEVICE); + skb = np->rx_info[entry].skb; + skb_put(skb, pkt_len); + np->rx_info[entry].skb = NULL; + np->rx_info[entry].mapping = 0; + } +#ifndef final_version /* Remove after testing. */ + /* You will want this info for the initial debug. */ + if (debug > 5) { + printk(KERN_DEBUG " Rx data %pM %pM %2.2x%2.2x.\n", + skb->data, skb->data + 6, + skb->data[12], skb->data[13]); + } +#endif + + skb->protocol = eth_type_trans(skb, dev); +#ifdef VLAN_SUPPORT + if (debug > 4) + printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2)); +#endif + if (le16_to_cpu(desc->status2) & 0x0100) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + dev->stats.rx_compressed++; + } + /* + * This feature doesn't seem to be working, at least + * with the two firmware versions I have. If the GFP sees + * an IP fragment, it either ignores it completely, or reports + * "bad checksum" on it. + * + * Maybe I missed something -- corrections are welcome. + * Until then, the printk stays. :-) -Ion + */ + else if (le16_to_cpu(desc->status2) & 0x0040) { + skb->ip_summed = CHECKSUM_COMPLETE; + skb->csum = le16_to_cpu(desc->csum); + printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2)); + } +#ifdef VLAN_SUPPORT + if (le16_to_cpu(desc->status2) & 0x0200) { + u16 vlid = le16_to_cpu(desc->vlanid); + + if (debug > 4) { + printk(KERN_DEBUG " netdev_rx() vlanid = %d\n", + vlid); + } + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlid); + } +#endif /* VLAN_SUPPORT */ + netif_receive_skb(skb); + dev->stats.rx_packets++; + + next_rx: + np->cur_rx++; + desc->status = 0; + np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; + } + + if (*quota == 0) { /* out of rx quota */ + retcode = 1; + goto out; + } + writew(np->rx_done, np->base + CompletionQConsumerIdx); + + out: + refill_rx_ring(dev); + if (debug > 5) + printk(KERN_DEBUG " exiting netdev_rx(): %d, status of %d was %#8.8x.\n", + retcode, np->rx_done, desc_status); + return retcode; +} + +static int netdev_poll(struct napi_struct *napi, int budget) +{ + struct netdev_private *np = container_of(napi, struct netdev_private, napi); + struct net_device *dev = np->dev; + u32 intr_status; + void __iomem *ioaddr = np->base; + int quota = budget; + + do { + writel(IntrRxDone | IntrRxEmpty, ioaddr + IntrClear); + + if (__netdev_rx(dev, "a)) + goto out; + + intr_status = readl(ioaddr + IntrStatus); + } while (intr_status & (IntrRxDone | IntrRxEmpty)); + + napi_complete(napi); + intr_status = readl(ioaddr + IntrEnable); + intr_status |= IntrRxDone | IntrRxEmpty; + writel(intr_status, ioaddr + IntrEnable); + + out: + if (debug > 5) + printk(KERN_DEBUG " exiting netdev_poll(): %d.\n", + budget - quota); + + /* Restart Rx engine if stopped. */ + return budget - quota; +} + +static void refill_rx_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + struct sk_buff *skb; + int entry = -1; + + /* Refill the Rx ring buffers. */ + for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { + entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_info[entry].skb == NULL) { + skb = netdev_alloc_skb(dev, np->rx_buf_sz); + np->rx_info[entry].skb = skb; + if (skb == NULL) + break; /* Better luck next round. */ + np->rx_info[entry].mapping = + dma_map_single(&np->pci_dev->dev, skb->data, + np->rx_buf_sz, DMA_FROM_DEVICE); + if (dma_mapping_error(&np->pci_dev->dev, np->rx_info[entry].mapping)) { + dev_kfree_skb(skb); + np->rx_info[entry].skb = NULL; + break; + } + np->rx_ring[entry].rxaddr = + cpu_to_dma(np->rx_info[entry].mapping | RxDescValid); + } + if (entry == RX_RING_SIZE - 1) + np->rx_ring[entry].rxaddr |= cpu_to_dma(RxDescEndRing); + } + if (entry >= 0) + writew(entry, np->base + RxDescQIdx); +} + + +static void netdev_media_change(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + u16 reg0, reg1, reg4, reg5; + u32 new_tx_mode; + u32 new_intr_timer_ctrl; + + /* reset status first */ + mdio_read(dev, np->phys[0], MII_BMCR); + mdio_read(dev, np->phys[0], MII_BMSR); + + reg0 = mdio_read(dev, np->phys[0], MII_BMCR); + reg1 = mdio_read(dev, np->phys[0], MII_BMSR); + + if (reg1 & BMSR_LSTATUS) { + /* link is up */ + if (reg0 & BMCR_ANENABLE) { + /* autonegotiation is enabled */ + reg4 = mdio_read(dev, np->phys[0], MII_ADVERTISE); + reg5 = mdio_read(dev, np->phys[0], MII_LPA); + if (reg4 & ADVERTISE_100FULL && reg5 & LPA_100FULL) { + np->speed100 = 1; + np->mii_if.full_duplex = 1; + } else if (reg4 & ADVERTISE_100HALF && reg5 & LPA_100HALF) { + np->speed100 = 1; + np->mii_if.full_duplex = 0; + } else if (reg4 & ADVERTISE_10FULL && reg5 & LPA_10FULL) { + np->speed100 = 0; + np->mii_if.full_duplex = 1; + } else { + np->speed100 = 0; + np->mii_if.full_duplex = 0; + } + } else { + /* autonegotiation is disabled */ + if (reg0 & BMCR_SPEED100) + np->speed100 = 1; + else + np->speed100 = 0; + if (reg0 & BMCR_FULLDPLX) + np->mii_if.full_duplex = 1; + else + np->mii_if.full_duplex = 0; + } + netif_carrier_on(dev); + printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n", + dev->name, + np->speed100 ? "100" : "10", + np->mii_if.full_duplex ? "full" : "half"); + + new_tx_mode = np->tx_mode & ~FullDuplex; /* duplex setting */ + if (np->mii_if.full_duplex) + new_tx_mode |= FullDuplex; + if (np->tx_mode != new_tx_mode) { + np->tx_mode = new_tx_mode; + writel(np->tx_mode | MiiSoftReset, ioaddr + TxMode); + udelay(1000); + writel(np->tx_mode, ioaddr + TxMode); + } + + new_intr_timer_ctrl = np->intr_timer_ctrl & ~Timer10X; + if (np->speed100) + new_intr_timer_ctrl |= Timer10X; + if (np->intr_timer_ctrl != new_intr_timer_ctrl) { + np->intr_timer_ctrl = new_intr_timer_ctrl; + writel(new_intr_timer_ctrl, ioaddr + IntrTimerCtrl); + } + } else { + netif_carrier_off(dev); + printk(KERN_DEBUG "%s: Link is down\n", dev->name); + } +} + + +static void netdev_error(struct net_device *dev, int intr_status) +{ + struct netdev_private *np = netdev_priv(dev); + + /* Came close to underrunning the Tx FIFO, increase threshold. */ + if (intr_status & IntrTxDataLow) { + if (np->tx_threshold <= PKT_BUF_SZ / 16) { + writel(++np->tx_threshold, np->base + TxThreshold); + printk(KERN_NOTICE "%s: PCI bus congestion, increasing Tx FIFO threshold to %d bytes\n", + dev->name, np->tx_threshold * 16); + } else + printk(KERN_WARNING "%s: PCI Tx underflow -- adapter is probably malfunctioning\n", dev->name); + } + if (intr_status & IntrRxGFPDead) { + dev->stats.rx_fifo_errors++; + dev->stats.rx_errors++; + } + if (intr_status & (IntrNoTxCsum | IntrDMAErr)) { + dev->stats.tx_fifo_errors++; + dev->stats.tx_errors++; + } + if ((intr_status & ~(IntrNormalMask | IntrAbnormalSummary | IntrLinkChange | IntrStatsMax | IntrTxDataLow | IntrRxGFPDead | IntrNoTxCsum | IntrPCIPad)) && debug) + printk(KERN_ERR "%s: Something Wicked happened! %#8.8x.\n", + dev->name, intr_status); +} + + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + + /* This adapter architecture needs no SMP locks. */ + dev->stats.tx_bytes = readl(ioaddr + 0x57010); + dev->stats.rx_bytes = readl(ioaddr + 0x57044); + dev->stats.tx_packets = readl(ioaddr + 0x57000); + dev->stats.tx_aborted_errors = + readl(ioaddr + 0x57024) + readl(ioaddr + 0x57028); + dev->stats.tx_window_errors = readl(ioaddr + 0x57018); + dev->stats.collisions = + readl(ioaddr + 0x57004) + readl(ioaddr + 0x57008); + + /* The chip only need report frame silently dropped. */ + dev->stats.rx_dropped += readw(ioaddr + RxDMAStatus); + writew(0, ioaddr + RxDMAStatus); + dev->stats.rx_crc_errors = readl(ioaddr + 0x5703C); + dev->stats.rx_frame_errors = readl(ioaddr + 0x57040); + dev->stats.rx_length_errors = readl(ioaddr + 0x57058); + dev->stats.rx_missed_errors = readl(ioaddr + 0x5707C); + + return &dev->stats; +} + +#ifdef VLAN_SUPPORT +static u32 set_vlan_mode(struct netdev_private *np) +{ + u32 ret = VlanMode; + u16 vid; + void __iomem *filter_addr = np->base + HashTable + 8; + int vlan_count = 0; + + for_each_set_bit(vid, np->active_vlans, VLAN_N_VID) { + if (vlan_count == 32) + break; + writew(vid, filter_addr); + filter_addr += 16; + vlan_count++; + } + if (vlan_count == 32) { + ret |= PerfectFilterVlan; + while (vlan_count < 32) { + writew(0, filter_addr); + filter_addr += 16; + vlan_count++; + } + } + return ret; +} +#endif /* VLAN_SUPPORT */ + +static void set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + u32 rx_mode = MinVLANPrio; + struct netdev_hw_addr *ha; + int i; + +#ifdef VLAN_SUPPORT + rx_mode |= set_vlan_mode(np); +#endif /* VLAN_SUPPORT */ + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + rx_mode |= AcceptAll; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + rx_mode |= AcceptBroadcast|AcceptAllMulticast|PerfectFilter; + } else if (netdev_mc_count(dev) <= 14) { + /* Use the 16 element perfect filter, skip first two entries. */ + void __iomem *filter_addr = ioaddr + PerfFilterTable + 2 * 16; + const __be16 *eaddrs; + netdev_for_each_mc_addr(ha, dev) { + eaddrs = (__be16 *) ha->addr; + writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 4; + writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4; + writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 8; + } + eaddrs = (const __be16 *)dev->dev_addr; + i = netdev_mc_count(dev) + 2; + while (i++ < 16) { + writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 4; + writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4; + writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 8; + } + rx_mode |= AcceptBroadcast|PerfectFilter; + } else { + /* Must use a multicast hash table. */ + void __iomem *filter_addr; + const __be16 *eaddrs; + __le16 mc_filter[32] __attribute__ ((aligned(sizeof(long)))); /* Multicast hash filter */ + + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + /* The chip uses the upper 9 CRC bits + as index into the hash table */ + int bit_nr = ether_crc_le(ETH_ALEN, ha->addr) >> 23; + __le32 *fptr = (__le32 *) &mc_filter[(bit_nr >> 4) & ~1]; + + *fptr |= cpu_to_le32(1 << (bit_nr & 31)); + } + /* Clear the perfect filter list, skip first two entries. */ + filter_addr = ioaddr + PerfFilterTable + 2 * 16; + eaddrs = (const __be16 *)dev->dev_addr; + for (i = 2; i < 16; i++) { + writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 4; + writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4; + writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 8; + } + for (filter_addr = ioaddr + HashTable, i = 0; i < 32; filter_addr+= 16, i++) + writew(mc_filter[i], filter_addr); + rx_mode |= AcceptBroadcast|PerfectFilter|HashFilter; + } + writel(rx_mode, ioaddr + RxFilterMode); +} + +static int check_if_running(struct net_device *dev) +{ + if (!netif_running(dev)) + return -EINVAL; + return 0; +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct netdev_private *np = netdev_priv(dev); + strscpy(info->driver, DRV_NAME, sizeof(info->driver)); + strscpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); +} + +static int get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + mii_ethtool_get_link_ksettings(&np->mii_if, cmd); + spin_unlock_irq(&np->lock); + return 0; +} + +static int set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + int res; + spin_lock_irq(&np->lock); + res = mii_ethtool_set_link_ksettings(&np->mii_if, cmd); + spin_unlock_irq(&np->lock); + check_duplex(dev); + return res; +} + +static int nway_reset(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_nway_restart(&np->mii_if); +} + +static u32 get_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_link_ok(&np->mii_if); +} + +static u32 get_msglevel(struct net_device *dev) +{ + return debug; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + debug = val; +} + +static const struct ethtool_ops ethtool_ops = { + .begin = check_if_running, + .get_drvinfo = get_drvinfo, + .nway_reset = nway_reset, + .get_link = get_link, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_link_ksettings = get_link_ksettings, + .set_link_ksettings = set_link_ksettings, +}; + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct netdev_private *np = netdev_priv(dev); + struct mii_ioctl_data *data = if_mii(rq); + int rc; + + if (!netif_running(dev)) + return -EINVAL; + + spin_lock_irq(&np->lock); + rc = generic_mii_ioctl(&np->mii_if, data, cmd, NULL); + spin_unlock_irq(&np->lock); + + if ((cmd == SIOCSMIIREG) && (data->phy_id == np->phys[0])) + check_duplex(dev); + + return rc; +} + +static int netdev_close(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + int i; + + netif_stop_queue(dev); + + napi_disable(&np->napi); + + if (debug > 1) { + printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n", + dev->name, (int) readl(ioaddr + IntrStatus)); + printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", + dev->name, np->cur_tx, np->dirty_tx, + np->cur_rx, np->dirty_rx); + } + + /* Disable interrupts by clearing the interrupt mask. */ + writel(0, ioaddr + IntrEnable); + + /* Stop the chip's Tx and Rx processes. */ + writel(0, ioaddr + GenCtrl); + readl(ioaddr + GenCtrl); + + if (debug > 5) { + printk(KERN_DEBUG" Tx ring at %#llx:\n", + (long long) np->tx_ring_dma); + for (i = 0; i < 8 /* TX_RING_SIZE is huge! */; i++) + printk(KERN_DEBUG " #%d desc. %#8.8x %#llx -> %#8.8x.\n", + i, le32_to_cpu(np->tx_ring[i].status), + (long long) dma_to_cpu(np->tx_ring[i].addr), + le32_to_cpu(np->tx_done_q[i].status)); + printk(KERN_DEBUG " Rx ring at %#llx -> %p:\n", + (long long) np->rx_ring_dma, np->rx_done_q); + if (np->rx_done_q) + for (i = 0; i < 8 /* RX_RING_SIZE */; i++) { + printk(KERN_DEBUG " #%d desc. %#llx -> %#8.8x\n", + i, (long long) dma_to_cpu(np->rx_ring[i].rxaddr), le32_to_cpu(np->rx_done_q[i].status)); + } + } + + free_irq(np->pci_dev->irq, dev); + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].rxaddr = cpu_to_dma(0xBADF00D0); /* An invalid address. */ + if (np->rx_info[i].skb != NULL) { + dma_unmap_single(&np->pci_dev->dev, + np->rx_info[i].mapping, + np->rx_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb(np->rx_info[i].skb); + } + np->rx_info[i].skb = NULL; + np->rx_info[i].mapping = 0; + } + for (i = 0; i < TX_RING_SIZE; i++) { + struct sk_buff *skb = np->tx_info[i].skb; + if (skb == NULL) + continue; + dma_unmap_single(&np->pci_dev->dev, np->tx_info[i].mapping, + skb_first_frag_len(skb), DMA_TO_DEVICE); + np->tx_info[i].mapping = 0; + dev_kfree_skb(skb); + np->tx_info[i].skb = NULL; + } + + return 0; +} + +static int __maybe_unused starfire_suspend(struct device *dev_d) +{ + struct net_device *dev = dev_get_drvdata(dev_d); + + if (netif_running(dev)) { + netif_device_detach(dev); + netdev_close(dev); + } + + return 0; +} + +static int __maybe_unused starfire_resume(struct device *dev_d) +{ + struct net_device *dev = dev_get_drvdata(dev_d); + + if (netif_running(dev)) { + netdev_open(dev); + netif_device_attach(dev); + } + + return 0; +} + +static void starfire_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct netdev_private *np = netdev_priv(dev); + + BUG_ON(!dev); + + unregister_netdev(dev); + + if (np->queue_mem) + dma_free_coherent(&pdev->dev, np->queue_mem_size, + np->queue_mem, np->queue_mem_dma); + + + /* XXX: add wakeup code -- requires firmware for MagicPacket */ + pci_set_power_state(pdev, PCI_D3hot); /* go to sleep in D3 mode */ + pci_disable_device(pdev); + + iounmap(np->base); + pci_release_regions(pdev); + + free_netdev(dev); /* Will also free np!! */ +} + +static SIMPLE_DEV_PM_OPS(starfire_pm_ops, starfire_suspend, starfire_resume); + +static struct pci_driver starfire_driver = { + .name = DRV_NAME, + .probe = starfire_init_one, + .remove = starfire_remove_one, + .driver.pm = &starfire_pm_ops, + .id_table = starfire_pci_tbl, +}; + + +static int __init starfire_init (void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n"); +#endif + + BUILD_BUG_ON(sizeof(dma_addr_t) != sizeof(netdrv_addr_t)); + + return pci_register_driver(&starfire_driver); +} + + +static void __exit starfire_cleanup (void) +{ + pci_unregister_driver (&starfire_driver); +} + + +module_init(starfire_init); +module_exit(starfire_cleanup); |