diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/ethernet/dec/tulip/tulip.h | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/dec/tulip/tulip.h')
-rw-r--r-- | drivers/net/ethernet/dec/tulip/tulip.h | 569 |
1 files changed, 569 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h new file mode 100644 index 0000000000..0ed598dc75 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/tulip.h @@ -0,0 +1,569 @@ +/* + drivers/net/ethernet/dec/tulip/tulip.h + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + +#ifndef __NET_TULIP_H__ +#define __NET_TULIP_H__ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/unaligned.h> + + + +/* undefine, or define to various debugging levels (>4 == obscene levels) */ +#define TULIP_DEBUG 1 + +#ifdef CONFIG_TULIP_MMIO +#define TULIP_BAR 1 /* CBMA */ +#else +#define TULIP_BAR 0 /* CBIO */ +#endif + + + +struct tulip_chip_table { + char *chip_name; + int io_size; + int valid_intrs; /* CSR7 interrupt enable settings */ + int flags; + void (*media_timer) (struct timer_list *); + work_func_t media_task; +}; + + +enum tbl_flag { + HAS_MII = 0x00001, + HAS_MEDIA_TABLE = 0x00002, + CSR12_IN_SROM = 0x00004, + ALWAYS_CHECK_MII = 0x00008, + HAS_ACPI = 0x00010, + MC_HASH_ONLY = 0x00020, /* Hash-only multicast filter. */ + HAS_PNICNWAY = 0x00080, + HAS_NWAY = 0x00040, /* Uses internal NWay xcvr. */ + HAS_INTR_MITIGATION = 0x00100, + IS_ASIX = 0x00200, + HAS_8023X = 0x00400, + COMET_MAC_ADDR = 0x00800, + HAS_PCI_MWI = 0x01000, + HAS_PHY_IRQ = 0x02000, + HAS_SWAPPED_SEEPROM = 0x04000, + NEEDS_FAKE_MEDIA_TABLE = 0x08000, + COMET_PM = 0x10000, +}; + + +/* chip types. careful! order is VERY IMPORTANT here, as these + * are used throughout the driver as indices into arrays */ +/* Note 21142 == 21143. */ +enum chips { + DC21040 = 0, + DC21041 = 1, + DC21140 = 2, + DC21142 = 3, DC21143 = 3, + LC82C168, + MX98713, + MX98715, + MX98725, + AX88140, + PNIC2, + COMET, + COMPEX9881, + I21145, + DM910X, + CONEXANT, +}; + + +enum MediaIs { + MediaIsFD = 1, + MediaAlwaysFD = 2, + MediaIsMII = 4, + MediaIsFx = 8, + MediaIs100 = 16 +}; + + +/* Offsets to the Command and Status Registers, "CSRs". All accesses + must be longword instructions and quadword aligned. */ +enum tulip_offsets { + CSR0 = 0, + CSR1 = 0x08, + CSR2 = 0x10, + CSR3 = 0x18, + CSR4 = 0x20, + CSR5 = 0x28, + CSR6 = 0x30, + CSR7 = 0x38, + CSR8 = 0x40, + CSR9 = 0x48, + CSR10 = 0x50, + CSR11 = 0x58, + CSR12 = 0x60, + CSR13 = 0x68, + CSR14 = 0x70, + CSR15 = 0x78, + CSR18 = 0x88, + CSR19 = 0x8c, + CSR20 = 0x90, + CSR27 = 0xAC, + CSR28 = 0xB0, +}; + +/* register offset and bits for CFDD PCI config reg */ +enum pci_cfg_driver_reg { + CFDD = 0x40, + CFDD_Sleep = (1 << 31), + CFDD_Snooze = (1 << 30), +}; + +#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber) + +/* The bits in the CSR5 status registers, mostly interrupt sources. */ +enum status_bits { + TimerInt = 0x800, + SystemError = 0x2000, + TPLnkFail = 0x1000, + TPLnkPass = 0x10, + NormalIntr = 0x10000, + AbnormalIntr = 0x8000, + RxJabber = 0x200, + RxDied = 0x100, + RxNoBuf = 0x80, + RxIntr = 0x40, + TxFIFOUnderflow = 0x20, + RxErrIntr = 0x10, + TxJabber = 0x08, + TxNoBuf = 0x04, + TxDied = 0x02, + TxIntr = 0x01, +}; + +/* bit mask for CSR5 TX/RX process state */ +#define CSR5_TS 0x00700000 +#define CSR5_RS 0x000e0000 + +enum tulip_mode_bits { + TxThreshold = (1 << 22), + FullDuplex = (1 << 9), + TxOn = 0x2000, + AcceptBroadcast = 0x0100, + AcceptAllMulticast = 0x0080, + AcceptAllPhys = 0x0040, + AcceptRunt = 0x0008, + RxOn = 0x0002, + RxTx = (TxOn | RxOn), +}; + + +enum tulip_busconfig_bits { + MWI = (1 << 24), + MRL = (1 << 23), + MRM = (1 << 21), + CALShift = 14, + BurstLenShift = 8, +}; + + +/* The Tulip Rx and Tx buffer descriptors. */ +struct tulip_rx_desc { + __le32 status; + __le32 length; + __le32 buffer1; + __le32 buffer2; +}; + + +struct tulip_tx_desc { + __le32 status; + __le32 length; + __le32 buffer1; + __le32 buffer2; /* We use only buffer 1. */ +}; + + +enum desc_status_bits { + DescOwned = 0x80000000, + DescWholePkt = 0x60000000, + DescEndPkt = 0x40000000, + DescStartPkt = 0x20000000, + DescEndRing = 0x02000000, + DescUseLink = 0x01000000, + + /* + * Error summary flag is logical or of 'CRC Error', 'Collision Seen', + * 'Frame Too Long', 'Runt' and 'Descriptor Error' flags generated + * within tulip chip. + */ + RxDescErrorSummary = 0x8000, + RxDescCRCError = 0x0002, + RxDescCollisionSeen = 0x0040, + + /* + * 'Frame Too Long' flag is set if packet length including CRC exceeds + * 1518. However, a full sized VLAN tagged frame is 1522 bytes + * including CRC. + * + * The tulip chip does not block oversized frames, and if this flag is + * set on a receive descriptor it does not indicate the frame has been + * truncated. The receive descriptor also includes the actual length. + * Therefore we can safety ignore this flag and check the length + * ourselves. + */ + RxDescFrameTooLong = 0x0080, + RxDescRunt = 0x0800, + RxDescDescErr = 0x4000, + RxWholePkt = 0x00000300, + /* + * Top three bits of 14 bit frame length (status bits 27-29) should + * never be set as that would make frame over 2047 bytes. The Receive + * Watchdog flag (bit 4) may indicate the length is over 2048 and the + * length field is invalid. + */ + RxLengthOver2047 = 0x38000010 +}; + + +enum t21143_csr6_bits { + csr6_sc = (1<<31), + csr6_ra = (1<<30), + csr6_ign_dest_msb = (1<<26), + csr6_mbo = (1<<25), + csr6_scr = (1<<24), /* scramble mode flag: can't be set */ + csr6_pcs = (1<<23), /* Enables PCS functions (symbol mode requires csr6_ps be set) default is set */ + csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */ + csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */ + csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */ + csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */ + csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */ + csr6_trh = (1<<15), /* Transmit Threshold high bit */ + csr6_trl = (1<<14), /* Transmit Threshold low bit */ + + /*************************************************************** + * This table shows transmit threshold values based on media * + * and these two registers (from PNIC1 & 2 docs) Note: this is * + * all meaningless if sf is set. * + ***************************************************************/ + + /*********************************** + * (trh,trl) * 100BaseTX * 10BaseT * + *********************************** + * (0,0) * 128 * 72 * + * (0,1) * 256 * 96 * + * (1,0) * 512 * 128 * + * (1,1) * 1024 * 160 * + ***********************************/ + + csr6_fc = (1<<12), /* Forces a collision in next transmission (for testing in loopback mode) */ + csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */ + csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */ + /* set both and you get (PHY) loopback */ + csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */ + csr6_pm = (1<<7), /* Pass All Multicast */ + csr6_pr = (1<<6), /* Promiscuous mode */ + csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */ + csr6_if = (1<<4), /* Inverse Filtering, rejects only addresses in address table: can't be set */ + csr6_pb = (1<<3), /* Pass Bad Frames, (1) causes even bad frames to be passed on */ + csr6_ho = (1<<2), /* Hash-only filtering mode: can't be set */ + csr6_hp = (1<<0), /* Hash/Perfect Receive Filtering Mode: can't be set */ + + csr6_mask_capture = (csr6_sc | csr6_ca), + csr6_mask_defstate = (csr6_mask_capture | csr6_mbo), + csr6_mask_hdcap = (csr6_mask_defstate | csr6_hbd | csr6_ps), + csr6_mask_hdcaptt = (csr6_mask_hdcap | csr6_trh | csr6_trl), + csr6_mask_fullcap = (csr6_mask_hdcaptt | csr6_fd), + csr6_mask_fullpromisc = (csr6_pr | csr6_pm), + csr6_mask_filters = (csr6_hp | csr6_ho | csr6_if), + csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd), +}; + +enum tulip_comet_csr13_bits { +/* The LINKOFFE and LINKONE work in conjunction with LSCE, i.e. they + * determine which link status transition wakes up if LSCE is + * enabled */ + comet_csr13_linkoffe = (1 << 17), + comet_csr13_linkone = (1 << 16), + comet_csr13_wfre = (1 << 10), + comet_csr13_mpre = (1 << 9), + comet_csr13_lsce = (1 << 8), + comet_csr13_wfr = (1 << 2), + comet_csr13_mpr = (1 << 1), + comet_csr13_lsc = (1 << 0), +}; + +enum tulip_comet_csr18_bits { + comet_csr18_pmes_sticky = (1 << 24), + comet_csr18_pm_mode = (1 << 19), + comet_csr18_apm_mode = (1 << 18), + comet_csr18_d3a = (1 << 7) +}; + +enum tulip_comet_csr20_bits { + comet_csr20_pmes = (1 << 15), +}; + +/* Keep the ring sizes a power of two for efficiency. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ + +#define TX_RING_SIZE 32 +#define RX_RING_SIZE 128 +#define MEDIA_MASK 31 + +/* The receiver on the DC21143 rev 65 can fail to close the last + * receive descriptor in certain circumstances (see errata) when + * using MWI. This can only occur if the receive buffer ends on + * a cache line boundary, so the "+ 4" below ensures it doesn't. + */ +#define PKT_BUF_SZ (1536 + 4) /* Size of each temporary Rx buffer. */ + +#define TULIP_MIN_CACHE_LINE 8 /* in units of 32-bit words */ + +#if defined(__sparc__) || defined(__hppa__) +/* The UltraSparc PCI controllers will disconnect at every 64-byte + * crossing anyways so it makes no sense to tell Tulip to burst + * any more than that. + */ +#define TULIP_MAX_CACHE_LINE 16 /* in units of 32-bit words */ +#else +#define TULIP_MAX_CACHE_LINE 32 /* in units of 32-bit words */ +#endif + + +/* Ring-wrap flag in length field, use for last ring entry. + 0x01000000 means chain on buffer2 address, + 0x02000000 means use the ring start address in CSR2/3. + Note: Some work-alike chips do not function correctly in chained mode. + The ASIX chip works only in chained mode. + Thus we indicates ring mode, but always write the 'next' field for + chained mode as well. +*/ +#define DESC_RING_WRAP 0x02000000 + + +#define EEPROM_SIZE 512 /* 2 << EEPROM_ADDRLEN */ + + +#define RUN_AT(x) (jiffies + (x)) + +#define get_u16(ptr) get_unaligned_le16((ptr)) + +struct medialeaf { + u8 type; + u8 media; + unsigned char *leafdata; +}; + + +struct mediatable { + u16 defaultmedia; + u8 leafcount; + u8 csr12dir; /* General purpose pin directions. */ + unsigned has_mii:1; + unsigned has_nonmii:1; + unsigned has_reset:6; + u32 csr15dir; + u32 csr15val; /* 21143 NWay setting. */ + struct medialeaf mleaf[]; +}; + + +struct mediainfo { + struct mediainfo *next; + int info_type; + int index; + unsigned char *info; +}; + +struct ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; + + +struct tulip_private { + const char *product_name; + struct net_device *next_module; + struct tulip_rx_desc *rx_ring; + struct tulip_tx_desc *tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + /* The saved address of a sent-in-place packet/buffer, for skfree(). */ + struct ring_info tx_buffers[TX_RING_SIZE]; + /* The addresses of receive-in-place skbuffs. */ + struct ring_info rx_buffers[RX_RING_SIZE]; + u16 setup_frame[96]; /* Pseudo-Tx frame to init address table. */ + int chip_id; + int revision; + int flags; + struct napi_struct napi; + struct timer_list timer; /* Media selection timer. */ + struct timer_list oom_timer; /* Out of memory timer. */ + u32 mc_filter[2]; + spinlock_t lock; + spinlock_t mii_lock; + unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ + +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + int mit_on; +#endif + unsigned int full_duplex:1; /* Full-duplex operation requested. */ + unsigned int full_duplex_lock:1; + unsigned int fake_addr:1; /* Multiport board faked address. */ + unsigned int default_port:4; /* Last dev->if_port value. */ + unsigned int media2:4; /* Secondary monitored media port. */ + unsigned int medialock:1; /* Don't sense media type. */ + unsigned int mediasense:1; /* Media sensing in progress. */ + unsigned int nway:1, nwayset:1; /* 21143 internal NWay. */ + unsigned int timeout_recovery:1; + unsigned int csr0; /* CSR0 setting. */ + unsigned int csr6; /* Current CSR6 control settings. */ + unsigned char eeprom[EEPROM_SIZE]; /* Serial EEPROM contents. */ + void (*link_change) (struct net_device * dev, int csr5); + struct ethtool_wolinfo wolinfo; /* WOL settings */ + u16 sym_advertise, mii_advertise; /* NWay capabilities advertised. */ + u16 lpar; /* 21143 Link partner ability. */ + u16 advertising[4]; + signed char phys[4], mii_cnt; /* MII device addresses. */ + struct mediatable *mtable; + int cur_index; /* Current media index. */ + int saved_if_port; + struct pci_dev *pdev; + int ttimer; + int susp_rx; + unsigned long nir; + void __iomem *base_addr; + int csr12_shadow; + int pad0; /* Used for 8-byte alignment */ + struct work_struct media_work; + struct net_device *dev; +}; + + +struct eeprom_fixup { + char *name; + unsigned char addr0; + unsigned char addr1; + unsigned char addr2; + u16 newtable[32]; /* Max length below. */ +}; + + +/* 21142.c */ +extern u16 t21142_csr14[]; +void t21142_media_task(struct work_struct *work); +void t21142_start_nway(struct net_device *dev); +void t21142_lnk_change(struct net_device *dev, int csr5); + + +/* PNIC2.c */ +void pnic2_lnk_change(struct net_device *dev, int csr5); +void pnic2_timer(struct timer_list *t); +void pnic2_start_nway(struct net_device *dev); + +/* eeprom.c */ +void tulip_parse_eeprom(struct net_device *dev); +int tulip_read_eeprom(struct net_device *dev, int location, int addr_len); + +/* interrupt.c */ +extern unsigned int tulip_max_interrupt_work; +extern int tulip_rx_copybreak; +irqreturn_t tulip_interrupt(int irq, void *dev_instance); +int tulip_refill_rx(struct net_device *dev); +#ifdef CONFIG_TULIP_NAPI +int tulip_poll(struct napi_struct *napi, int budget); +#endif + + +/* media.c */ +int tulip_mdio_read(struct net_device *dev, int phy_id, int location); +void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value); +void tulip_select_media(struct net_device *dev, int startup); +int tulip_check_duplex(struct net_device *dev); +void tulip_find_mii (struct net_device *dev, int board_idx); + +/* pnic.c */ +void pnic_do_nway(struct net_device *dev); +void pnic_lnk_change(struct net_device *dev, int csr5); +void pnic_timer(struct timer_list *t); + +/* timer.c */ +void tulip_media_task(struct work_struct *work); +void mxic_timer(struct timer_list *t); +void comet_timer(struct timer_list *t); + +/* tulip_core.c */ +extern int tulip_debug; +extern const char * const medianame[]; +extern const char tulip_media_cap[]; +extern const struct tulip_chip_table tulip_tbl[]; +void oom_timer(struct timer_list *t); +extern u8 t21040_csr13[]; + +static inline void tulip_start_rxtx(struct tulip_private *tp) +{ + void __iomem *ioaddr = tp->base_addr; + iowrite32(tp->csr6 | RxTx, ioaddr + CSR6); + barrier(); + (void) ioread32(ioaddr + CSR6); /* mmio sync */ +} + +static inline void tulip_stop_rxtx(struct tulip_private *tp) +{ + void __iomem *ioaddr = tp->base_addr; + u32 csr6 = ioread32(ioaddr + CSR6); + + if (csr6 & RxTx) { + unsigned i=1300/10; + iowrite32(csr6 & ~RxTx, ioaddr + CSR6); + barrier(); + /* wait until in-flight frame completes. + * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin) + * Typically expect this loop to end in < 50 us on 100BT. + */ + while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS))) + udelay(10); + + if (!i) + netdev_dbg(tp->dev, "tulip_stop_rxtx() failed (CSR5 0x%x CSR6 0x%x)\n", + ioread32(ioaddr + CSR5), + ioread32(ioaddr + CSR6)); + } +} + +static inline void tulip_restart_rxtx(struct tulip_private *tp) +{ + tulip_stop_rxtx(tp); + udelay(5); + tulip_start_rxtx(tp); +} + +static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr) +{ + /* Stop and restart the chip's Tx processes. */ + tulip_restart_rxtx(tp); + /* Trigger an immediate transmit demand. */ + iowrite32(0, ioaddr + CSR1); + + tp->dev->stats.tx_errors++; +} + +#endif /* __NET_TULIP_H__ */ |