Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 144 insertions, 0 deletions

diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
new file mode 100644
index 0000000000..3312e1d93c
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# HISILICON device configuration
+#
+
+config NET_VENDOR_HISILICON
+	bool "Hisilicon devices"
+	default y
+	depends on OF || ACPI
+	depends on ARM || ARM64 || COMPILE_TEST
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Hisilicon devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_HISILICON
+
+config HIX5HD2_GMAC
+	tristate "Hisilicon HIX5HD2 Family Network Device Support"
+	select PHYLIB
+	help
+	  This selects the hix5hd2 mac family network device.
+
+config HISI_FEMAC
+	tristate "Hisilicon Fast Ethernet MAC device support"
+	depends on HAS_IOMEM
+	select PHYLIB
+	select RESET_CONTROLLER
+	help
+	  This selects the Hisilicon Fast Ethernet MAC device(FEMAC).
+	  The FEMAC receives and transmits data over Ethernet
+	  ports at 10/100 Mbps in full-duplex or half-duplex mode.
+	  The FEMAC exchanges data with the CPU, and supports
+	  the energy efficient Ethernet (EEE).
+
+config HIP04_ETH
+	tristate "HISILICON P04 Ethernet support"
+	depends on HAS_IOMEM	# For MFD_SYSCON
+	select MARVELL_PHY
+	select MFD_SYSCON
+	select HNS_MDIO
+	help
+	  If you wish to compile a kernel for a hardware with hisilicon p04 SoC and
+	  want to use the internal ethernet then you should answer Y to this.
+
+config HI13X1_GMAC
+	bool "Hisilicon HI13X1 Network Device Support"
+	depends on HIP04_ETH
+	help
+	  If you wish to compile a kernel for a hardware with hisilicon hi13x1_gamc
+	  then you should answer Y to this. This makes this driver suitable for use
+	  on certain boards such as the HI13X1.
+
+	  If you are unsure, say N.
+
+config HNS_MDIO
+	tristate
+	select PHYLIB
+	help
+	  This selects the HNS MDIO support. It is needed by HNS_DSAF to access
+	  the PHY
+
+config HNS
+	tristate
+	help
+	  This selects the framework support for Hisilicon Network Subsystem. It
+	  is needed by any driver which provides HNS acceleration engine or make
+	  use of the engine
+
+config HNS_DSAF
+	tristate "Hisilicon HNS DSAF device Support"
+	select HNS
+	select HNS_MDIO
+	help
+	  This selects the DSAF (Distributed System Area Frabric) network
+	  acceleration engine support. The engine is used in Hisilicon hip05,
+	  Hi1610 and further ICT SoC
+
+config HNS_ENET
+	tristate "Hisilicon HNS Ethernet Device Support"
+	select PHYLIB
+	select HNS
+	help
+	  This selects the general ethernet driver for HNS.  This module make
+	  use of any HNS AE driver, such as HNS_DSAF
+
+config HNS3
+	tristate "Hisilicon Network Subsystem Support HNS3 (Framework)"
+	depends on PCI
+	select NET_DEVLINK
+	select PAGE_POOL
+	help
+	  This selects the framework support for Hisilicon Network Subsystem 3.
+	  This layer facilitates clients like ENET, RoCE and user-space ethernet
+	  drivers(like ODP)to register with HNAE devices and their associated
+	  operations.
+
+if HNS3
+
+config HNS3_HCLGE
+	tristate "Hisilicon HNS3 HCLGE Acceleration Engine & Compatibility Layer Support"
+	default m
+	depends on PCI_MSI
+	depends on PTP_1588_CLOCK_OPTIONAL
+	help
+	  This selects the HNS3_HCLGE network acceleration engine & its hardware
+	  compatibility layer. The engine would be used in Hisilicon hip08 family of
+	  SoCs and further upcoming SoCs.
+
+config HNS3_DCB
+	bool "Hisilicon HNS3 Data Center Bridge Support"
+	default n
+	depends on HNS3_HCLGE && DCB
+	help
+	  Say Y here if you want to use Data Center Bridging (DCB) in the HNS3 driver.
+
+	  If unsure, say N.
+
+config HNS3_HCLGEVF
+	tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support"
+	depends on PCI_MSI
+	depends on HNS3_HCLGE
+	help
+	  This selects the HNS3 VF drivers network acceleration engine & its hardware
+	  compatibility layer. The engine would be used in Hisilicon hip08 family of
+	  SoCs and further upcoming SoCs.
+
+config HNS3_ENET
+	tristate "Hisilicon HNS3 Ethernet Device Support"
+	default m
+	depends on 64BIT && PCI
+	depends on INET
+	select DIMLIB
+	help
+	  This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
+	  family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
+	  devices and their associated operations.
+
+endif #HNS3
+
+endif # NET_VENDOR_HISILICON