diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/ethernet/intel/e1000e/ptp.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ptp.c')
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/ptp.c | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c new file mode 100644 index 0000000000..02d871bc11 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -0,0 +1,347 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2018 Intel Corporation. */ + +/* PTP 1588 Hardware Clock (PHC) + * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb) + * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com> + */ + +#include "e1000.h" + +#ifdef CONFIG_E1000E_HWTS +#include <linux/clocksource.h> +#include <linux/ktime.h> +#include <asm/tsc.h> +#endif + +/** + * e1000e_phc_adjfine - adjust the frequency of the hardware clock + * @ptp: ptp clock structure + * @delta: Desired frequency chance in scaled parts per million + * + * Adjust the frequency of the PHC cycle counter by the indicated delta from + * the base frequency. + * + * Scaled parts per million is ppm but with a 16 bit binary fractional field. + **/ +static int e1000e_phc_adjfine(struct ptp_clock_info *ptp, long delta) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + struct e1000_hw *hw = &adapter->hw; + unsigned long flags; + u64 incvalue; + u32 timinca; + s32 ret_val; + + /* Get the System Time Register SYSTIM base frequency */ + ret_val = e1000e_get_base_timinca(adapter, &timinca); + if (ret_val) + return ret_val; + + spin_lock_irqsave(&adapter->systim_lock, flags); + + incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK; + incvalue = adjust_by_scaled_ppm(incvalue, delta); + + timinca &= ~E1000_TIMINCA_INCVALUE_MASK; + timinca |= incvalue; + + ew32(TIMINCA, timinca); + + adapter->ptp_delta = delta; + + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + return 0; +} + +/** + * e1000e_phc_adjtime - Shift the time of the hardware clock + * @ptp: ptp clock structure + * @delta: Desired change in nanoseconds + * + * Adjust the timer by resetting the timecounter structure. + **/ +static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + + spin_lock_irqsave(&adapter->systim_lock, flags); + timecounter_adjtime(&adapter->tc, delta); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + return 0; +} + +#ifdef CONFIG_E1000E_HWTS +#define MAX_HW_WAIT_COUNT (3) + +/** + * e1000e_phc_get_syncdevicetime - Callback given to timekeeping code reads system/device registers + * @device: current device time + * @system: system counter value read synchronously with device time + * @ctx: context provided by timekeeping code + * + * Read device and system (ART) clock simultaneously and return the corrected + * clock values in ns. + **/ +static int e1000e_phc_get_syncdevicetime(ktime_t *device, + struct system_counterval_t *system, + void *ctx) +{ + struct e1000_adapter *adapter = (struct e1000_adapter *)ctx; + struct e1000_hw *hw = &adapter->hw; + unsigned long flags; + int i; + u32 tsync_ctrl; + u64 dev_cycles; + u64 sys_cycles; + + tsync_ctrl = er32(TSYNCTXCTL); + tsync_ctrl |= E1000_TSYNCTXCTL_START_SYNC | + E1000_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK; + ew32(TSYNCTXCTL, tsync_ctrl); + for (i = 0; i < MAX_HW_WAIT_COUNT; ++i) { + udelay(1); + tsync_ctrl = er32(TSYNCTXCTL); + if (tsync_ctrl & E1000_TSYNCTXCTL_SYNC_COMP) + break; + } + + if (i == MAX_HW_WAIT_COUNT) + return -ETIMEDOUT; + + dev_cycles = er32(SYSSTMPH); + dev_cycles <<= 32; + dev_cycles |= er32(SYSSTMPL); + spin_lock_irqsave(&adapter->systim_lock, flags); + *device = ns_to_ktime(timecounter_cyc2time(&adapter->tc, dev_cycles)); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + sys_cycles = er32(PLTSTMPH); + sys_cycles <<= 32; + sys_cycles |= er32(PLTSTMPL); + *system = convert_art_to_tsc(sys_cycles); + + return 0; +} + +/** + * e1000e_phc_getcrosststamp - Reads the current system/device cross timestamp + * @ptp: ptp clock structure + * @xtstamp: structure containing timestamp + * + * Read device and system (ART) clock simultaneously and return the scaled + * clock values in ns. + **/ +static int e1000e_phc_getcrosststamp(struct ptp_clock_info *ptp, + struct system_device_crosststamp *xtstamp) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + + return get_device_system_crosststamp(e1000e_phc_get_syncdevicetime, + adapter, NULL, xtstamp); +} +#endif/*CONFIG_E1000E_HWTS*/ + +/** + * e1000e_phc_gettimex - Reads the current time from the hardware clock and + * system clock + * @ptp: ptp clock structure + * @ts: timespec structure to hold the current PHC time + * @sts: structure to hold the current system time + * + * Read the timecounter and return the correct value in ns after converting + * it into a struct timespec. + **/ +static int e1000e_phc_gettimex(struct ptp_clock_info *ptp, + struct timespec64 *ts, + struct ptp_system_timestamp *sts) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + u64 cycles, ns; + + spin_lock_irqsave(&adapter->systim_lock, flags); + + /* NOTE: Non-monotonic SYSTIM readings may be returned */ + cycles = e1000e_read_systim(adapter, sts); + ns = timecounter_cyc2time(&adapter->tc, cycles); + + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + *ts = ns_to_timespec64(ns); + + return 0; +} + +/** + * e1000e_phc_settime - Set the current time on the hardware clock + * @ptp: ptp clock structure + * @ts: timespec containing the new time for the cycle counter + * + * Reset the timecounter to use a new base value instead of the kernel + * wall timer value. + **/ +static int e1000e_phc_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + u64 ns; + + ns = timespec64_to_ns(ts); + + /* reset the timecounter */ + spin_lock_irqsave(&adapter->systim_lock, flags); + timecounter_init(&adapter->tc, &adapter->cc, ns); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + return 0; +} + +/** + * e1000e_phc_enable - enable or disable an ancillary feature + * @ptp: ptp clock structure + * @request: Desired resource to enable or disable + * @on: Caller passes one to enable or zero to disable + * + * Enable (or disable) ancillary features of the PHC subsystem. + * Currently, no ancillary features are supported. + **/ +static int e1000e_phc_enable(struct ptp_clock_info __always_unused *ptp, + struct ptp_clock_request __always_unused *request, + int __always_unused on) +{ + return -EOPNOTSUPP; +} + +static void e1000e_systim_overflow_work(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, + systim_overflow_work.work); + struct e1000_hw *hw = &adapter->hw; + struct timespec64 ts; + u64 ns; + + /* Update the timecounter */ + ns = timecounter_read(&adapter->tc); + + ts = ns_to_timespec64(ns); + e_dbg("SYSTIM overflow check at %lld.%09lu\n", + (long long) ts.tv_sec, ts.tv_nsec); + + schedule_delayed_work(&adapter->systim_overflow_work, + E1000_SYSTIM_OVERFLOW_PERIOD); +} + +static const struct ptp_clock_info e1000e_ptp_clock_info = { + .owner = THIS_MODULE, + .n_alarm = 0, + .n_ext_ts = 0, + .n_per_out = 0, + .n_pins = 0, + .pps = 0, + .adjfine = e1000e_phc_adjfine, + .adjtime = e1000e_phc_adjtime, + .gettimex64 = e1000e_phc_gettimex, + .settime64 = e1000e_phc_settime, + .enable = e1000e_phc_enable, +}; + +/** + * e1000e_ptp_init - initialize PTP for devices which support it + * @adapter: board private structure + * + * This function performs the required steps for enabling PTP support. + * If PTP support has already been loaded it simply calls the cyclecounter + * init routine and exits. + **/ +void e1000e_ptp_init(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + adapter->ptp_clock = NULL; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return; + + adapter->ptp_clock_info = e1000e_ptp_clock_info; + + snprintf(adapter->ptp_clock_info.name, + sizeof(adapter->ptp_clock_info.name), "%pm", + adapter->netdev->perm_addr); + + switch (hw->mac.type) { + case e1000_pch2lan: + case e1000_pch_lpt: + case e1000_pch_spt: + case e1000_pch_cnp: + case e1000_pch_tgp: + case e1000_pch_adp: + case e1000_pch_mtp: + case e1000_pch_lnp: + case e1000_pch_ptp: + case e1000_pch_nvp: + if ((hw->mac.type < e1000_pch_lpt) || + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + adapter->ptp_clock_info.max_adj = 24000000 - 1; + break; + } + fallthrough; + case e1000_82574: + case e1000_82583: + adapter->ptp_clock_info.max_adj = 600000000 - 1; + break; + default: + break; + } + +#ifdef CONFIG_E1000E_HWTS + /* CPU must have ART and GBe must be from Sunrise Point or greater */ + if (hw->mac.type >= e1000_pch_spt && boot_cpu_has(X86_FEATURE_ART)) + adapter->ptp_clock_info.getcrosststamp = + e1000e_phc_getcrosststamp; +#endif/*CONFIG_E1000E_HWTS*/ + + INIT_DELAYED_WORK(&adapter->systim_overflow_work, + e1000e_systim_overflow_work); + + schedule_delayed_work(&adapter->systim_overflow_work, + E1000_SYSTIM_OVERFLOW_PERIOD); + + adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info, + &adapter->pdev->dev); + if (IS_ERR(adapter->ptp_clock)) { + adapter->ptp_clock = NULL; + e_err("ptp_clock_register failed\n"); + } else if (adapter->ptp_clock) { + e_info("registered PHC clock\n"); + } +} + +/** + * e1000e_ptp_remove - disable PTP device and stop the overflow check + * @adapter: board private structure + * + * Stop the PTP support, and cancel the delayed work. + **/ +void e1000e_ptp_remove(struct e1000_adapter *adapter) +{ + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return; + + cancel_delayed_work_sync(&adapter->systim_overflow_work); + + if (adapter->ptp_clock) { + ptp_clock_unregister(adapter->ptp_clock); + adapter->ptp_clock = NULL; + e_info("removed PHC\n"); + } +} |