diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/ethernet/intel/i40e/i40e_ptp.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_ptp.c')
-rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_ptp.c | 1576 |
1 files changed, 1576 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c new file mode 100644 index 0000000000..8a26811140 --- /dev/null +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c @@ -0,0 +1,1576 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2013 - 2018 Intel Corporation. */ + +#include "i40e.h" +#include <linux/ptp_classify.h> +#include <linux/posix-clock.h> + +/* The XL710 timesync is very much like Intel's 82599 design when it comes to + * the fundamental clock design. However, the clock operations are much simpler + * in the XL710 because the device supports a full 64 bits of nanoseconds. + * Because the field is so wide, we can forgo the cycle counter and just + * operate with the nanosecond field directly without fear of overflow. + * + * Much like the 82599, the update period is dependent upon the link speed: + * At 40Gb, 25Gb, or no link, the period is 1.6ns. + * At 10Gb or 5Gb link, the period is multiplied by 2. (3.2ns) + * At 1Gb link, the period is multiplied by 20. (32ns) + * 1588 functionality is not supported at 100Mbps. + */ +#define I40E_PTP_40GB_INCVAL 0x0199999999ULL +#define I40E_PTP_10GB_INCVAL_MULT 2 +#define I40E_PTP_5GB_INCVAL_MULT 2 +#define I40E_PTP_1GB_INCVAL_MULT 20 +#define I40E_ISGN 0x80000000 + +#define I40E_PRTTSYN_CTL1_TSYNTYPE_V1 BIT(I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT) +#define I40E_PRTTSYN_CTL1_TSYNTYPE_V2 (2 << \ + I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT) +#define I40E_SUBDEV_ID_25G_PTP_PIN 0xB + +enum i40e_ptp_pin { + SDP3_2 = 0, + SDP3_3, + GPIO_4 +}; + +enum i40e_can_set_pins_t { + CANT_DO_PINS = -1, + CAN_SET_PINS, + CAN_DO_PINS +}; + +static struct ptp_pin_desc sdp_desc[] = { + /* name idx func chan */ + {"SDP3_2", SDP3_2, PTP_PF_NONE, 0}, + {"SDP3_3", SDP3_3, PTP_PF_NONE, 1}, + {"GPIO_4", GPIO_4, PTP_PF_NONE, 1}, +}; + +enum i40e_ptp_gpio_pin_state { + end = -2, + invalid, + off, + in_A, + in_B, + out_A, + out_B, +}; + +static const char * const i40e_ptp_gpio_pin_state2str[] = { + "off", "in_A", "in_B", "out_A", "out_B" +}; + +enum i40e_ptp_led_pin_state { + led_end = -2, + low = 0, + high, +}; + +struct i40e_ptp_pins_settings { + enum i40e_ptp_gpio_pin_state sdp3_2; + enum i40e_ptp_gpio_pin_state sdp3_3; + enum i40e_ptp_gpio_pin_state gpio_4; + enum i40e_ptp_led_pin_state led2_0; + enum i40e_ptp_led_pin_state led2_1; + enum i40e_ptp_led_pin_state led3_0; + enum i40e_ptp_led_pin_state led3_1; +}; + +static const struct i40e_ptp_pins_settings + i40e_ptp_pin_led_allowed_states[] = { + {off, off, off, high, high, high, high}, + {off, in_A, off, high, high, high, low}, + {off, out_A, off, high, low, high, high}, + {off, in_B, off, high, high, high, low}, + {off, out_B, off, high, low, high, high}, + {in_A, off, off, high, high, high, low}, + {in_A, in_B, off, high, high, high, low}, + {in_A, out_B, off, high, low, high, high}, + {out_A, off, off, high, low, high, high}, + {out_A, in_B, off, high, low, high, high}, + {in_B, off, off, high, high, high, low}, + {in_B, in_A, off, high, high, high, low}, + {in_B, out_A, off, high, low, high, high}, + {out_B, off, off, high, low, high, high}, + {out_B, in_A, off, high, low, high, high}, + {off, off, in_A, high, high, low, high}, + {off, out_A, in_A, high, low, low, high}, + {off, in_B, in_A, high, high, low, low}, + {off, out_B, in_A, high, low, low, high}, + {out_A, off, in_A, high, low, low, high}, + {out_A, in_B, in_A, high, low, low, high}, + {in_B, off, in_A, high, high, low, low}, + {in_B, out_A, in_A, high, low, low, high}, + {out_B, off, in_A, high, low, low, high}, + {off, off, out_A, low, high, high, high}, + {off, in_A, out_A, low, high, high, low}, + {off, in_B, out_A, low, high, high, low}, + {off, out_B, out_A, low, low, high, high}, + {in_A, off, out_A, low, high, high, low}, + {in_A, in_B, out_A, low, high, high, low}, + {in_A, out_B, out_A, low, low, high, high}, + {in_B, off, out_A, low, high, high, low}, + {in_B, in_A, out_A, low, high, high, low}, + {out_B, off, out_A, low, low, high, high}, + {out_B, in_A, out_A, low, low, high, high}, + {off, off, in_B, high, high, low, high}, + {off, in_A, in_B, high, high, low, low}, + {off, out_A, in_B, high, low, low, high}, + {off, out_B, in_B, high, low, low, high}, + {in_A, off, in_B, high, high, low, low}, + {in_A, out_B, in_B, high, low, low, high}, + {out_A, off, in_B, high, low, low, high}, + {out_B, off, in_B, high, low, low, high}, + {out_B, in_A, in_B, high, low, low, high}, + {off, off, out_B, low, high, high, high}, + {off, in_A, out_B, low, high, high, low}, + {off, out_A, out_B, low, low, high, high}, + {off, in_B, out_B, low, high, high, low}, + {in_A, off, out_B, low, high, high, low}, + {in_A, in_B, out_B, low, high, high, low}, + {out_A, off, out_B, low, low, high, high}, + {out_A, in_B, out_B, low, low, high, high}, + {in_B, off, out_B, low, high, high, low}, + {in_B, in_A, out_B, low, high, high, low}, + {in_B, out_A, out_B, low, low, high, high}, + {end, end, end, led_end, led_end, led_end, led_end} +}; + +static int i40e_ptp_set_pins(struct i40e_pf *pf, + struct i40e_ptp_pins_settings *pins); + +/** + * i40e_ptp_extts0_work - workqueue task function + * @work: workqueue task structure + * + * Service for PTP external clock event + **/ +static void i40e_ptp_extts0_work(struct work_struct *work) +{ + struct i40e_pf *pf = container_of(work, struct i40e_pf, + ptp_extts0_work); + struct i40e_hw *hw = &pf->hw; + struct ptp_clock_event event; + u32 hi, lo; + + /* Event time is captured by one of the two matched registers + * PRTTSYN_EVNT_L: 32 LSB of sampled time event + * PRTTSYN_EVNT_H: 32 MSB of sampled time event + * Event is defined in PRTTSYN_EVNT_0 register + */ + lo = rd32(hw, I40E_PRTTSYN_EVNT_L(0)); + hi = rd32(hw, I40E_PRTTSYN_EVNT_H(0)); + + event.timestamp = (((u64)hi) << 32) | lo; + + event.type = PTP_CLOCK_EXTTS; + event.index = hw->pf_id; + + /* fire event */ + ptp_clock_event(pf->ptp_clock, &event); +} + +/** + * i40e_is_ptp_pin_dev - check if device supports PTP pins + * @hw: pointer to the hardware structure + * + * Return true if device supports PTP pins, false otherwise. + **/ +static bool i40e_is_ptp_pin_dev(struct i40e_hw *hw) +{ + return hw->device_id == I40E_DEV_ID_25G_SFP28 && + hw->subsystem_device_id == I40E_SUBDEV_ID_25G_PTP_PIN; +} + +/** + * i40e_can_set_pins - check possibility of manipulating the pins + * @pf: board private structure + * + * Check if all conditions are satisfied to manipulate PTP pins. + * Return CAN_SET_PINS if pins can be set on a specific PF or + * return CAN_DO_PINS if pins can be manipulated within a NIC or + * return CANT_DO_PINS otherwise. + **/ +static enum i40e_can_set_pins_t i40e_can_set_pins(struct i40e_pf *pf) +{ + if (!i40e_is_ptp_pin_dev(&pf->hw)) { + dev_warn(&pf->pdev->dev, + "PTP external clock not supported.\n"); + return CANT_DO_PINS; + } + + if (!pf->ptp_pins) { + dev_warn(&pf->pdev->dev, + "PTP PIN manipulation not allowed.\n"); + return CANT_DO_PINS; + } + + if (pf->hw.pf_id) { + dev_warn(&pf->pdev->dev, + "PTP PINs should be accessed via PF0.\n"); + return CAN_DO_PINS; + } + + return CAN_SET_PINS; +} + +/** + * i40_ptp_reset_timing_events - Reset PTP timing events + * @pf: Board private structure + * + * This function resets timing events for pf. + **/ +static void i40_ptp_reset_timing_events(struct i40e_pf *pf) +{ + u32 i; + + spin_lock_bh(&pf->ptp_rx_lock); + for (i = 0; i <= I40E_PRTTSYN_RXTIME_L_MAX_INDEX; i++) { + /* reading and automatically clearing timing events registers */ + rd32(&pf->hw, I40E_PRTTSYN_RXTIME_L(i)); + rd32(&pf->hw, I40E_PRTTSYN_RXTIME_H(i)); + pf->latch_events[i] = 0; + } + /* reading and automatically clearing timing events registers */ + rd32(&pf->hw, I40E_PRTTSYN_TXTIME_L); + rd32(&pf->hw, I40E_PRTTSYN_TXTIME_H); + + pf->tx_hwtstamp_timeouts = 0; + pf->tx_hwtstamp_skipped = 0; + pf->rx_hwtstamp_cleared = 0; + pf->latch_event_flags = 0; + spin_unlock_bh(&pf->ptp_rx_lock); +} + +/** + * i40e_ptp_verify - check pins + * @ptp: ptp clock + * @pin: pin index + * @func: assigned function + * @chan: channel + * + * Check pins consistency. + * Return 0 on success or error on failure. + **/ +static int i40e_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin, + enum ptp_pin_function func, unsigned int chan) +{ + switch (func) { + case PTP_PF_NONE: + case PTP_PF_EXTTS: + case PTP_PF_PEROUT: + break; + case PTP_PF_PHYSYNC: + return -EOPNOTSUPP; + } + return 0; +} + +/** + * i40e_ptp_read - Read the PHC time from the device + * @pf: Board private structure + * @ts: timespec structure to hold the current time value + * @sts: structure to hold the system time before and after reading the PHC + * + * This function reads the PRTTSYN_TIME registers and stores them in a + * timespec. However, since the registers are 64 bits of nanoseconds, we must + * convert the result to a timespec before we can return. + **/ +static void i40e_ptp_read(struct i40e_pf *pf, struct timespec64 *ts, + struct ptp_system_timestamp *sts) +{ + struct i40e_hw *hw = &pf->hw; + u32 hi, lo; + u64 ns; + + /* The timer latches on the lowest register read. */ + ptp_read_system_prets(sts); + lo = rd32(hw, I40E_PRTTSYN_TIME_L); + ptp_read_system_postts(sts); + hi = rd32(hw, I40E_PRTTSYN_TIME_H); + + ns = (((u64)hi) << 32) | lo; + + *ts = ns_to_timespec64(ns); +} + +/** + * i40e_ptp_write - Write the PHC time to the device + * @pf: Board private structure + * @ts: timespec structure that holds the new time value + * + * This function writes the PRTTSYN_TIME registers with the user value. Since + * we receive a timespec from the stack, we must convert that timespec into + * nanoseconds before programming the registers. + **/ +static void i40e_ptp_write(struct i40e_pf *pf, const struct timespec64 *ts) +{ + struct i40e_hw *hw = &pf->hw; + u64 ns = timespec64_to_ns(ts); + + /* The timer will not update until the high register is written, so + * write the low register first. + */ + wr32(hw, I40E_PRTTSYN_TIME_L, ns & 0xFFFFFFFF); + wr32(hw, I40E_PRTTSYN_TIME_H, ns >> 32); +} + +/** + * i40e_ptp_convert_to_hwtstamp - Convert device clock to system time + * @hwtstamps: Timestamp structure to update + * @timestamp: Timestamp from the hardware + * + * We need to convert the NIC clock value into a hwtstamp which can be used by + * the upper level timestamping functions. Since the timestamp is simply a 64- + * bit nanosecond value, we can call ns_to_ktime directly to handle this. + **/ +static void i40e_ptp_convert_to_hwtstamp(struct skb_shared_hwtstamps *hwtstamps, + u64 timestamp) +{ + memset(hwtstamps, 0, sizeof(*hwtstamps)); + + hwtstamps->hwtstamp = ns_to_ktime(timestamp); +} + +/** + * i40e_ptp_adjfine - Adjust the PHC frequency + * @ptp: The PTP clock structure + * @scaled_ppm: Scaled parts per million adjustment from base + * + * Adjust the frequency of the PHC by the indicated delta from the base + * frequency. + * + * Scaled parts per million is ppm with a 16 bit binary fractional field. + **/ +static int i40e_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +{ + struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); + struct i40e_hw *hw = &pf->hw; + u64 adj, base_adj; + + smp_mb(); /* Force any pending update before accessing. */ + base_adj = I40E_PTP_40GB_INCVAL * READ_ONCE(pf->ptp_adj_mult); + + adj = adjust_by_scaled_ppm(base_adj, scaled_ppm); + + wr32(hw, I40E_PRTTSYN_INC_L, adj & 0xFFFFFFFF); + wr32(hw, I40E_PRTTSYN_INC_H, adj >> 32); + + return 0; +} + +/** + * i40e_ptp_set_1pps_signal_hw - configure 1PPS PTP signal for pins + * @pf: the PF private data structure + * + * Configure 1PPS signal used for PTP pins + **/ +static void i40e_ptp_set_1pps_signal_hw(struct i40e_pf *pf) +{ + struct i40e_hw *hw = &pf->hw; + struct timespec64 now; + u64 ns; + + wr32(hw, I40E_PRTTSYN_AUX_0(1), 0); + wr32(hw, I40E_PRTTSYN_AUX_1(1), I40E_PRTTSYN_AUX_1_INSTNT); + wr32(hw, I40E_PRTTSYN_AUX_0(1), I40E_PRTTSYN_AUX_0_OUT_ENABLE); + + i40e_ptp_read(pf, &now, NULL); + now.tv_sec += I40E_PTP_2_SEC_DELAY; + now.tv_nsec = 0; + ns = timespec64_to_ns(&now); + + /* I40E_PRTTSYN_TGT_L(1) */ + wr32(hw, I40E_PRTTSYN_TGT_L(1), ns & 0xFFFFFFFF); + /* I40E_PRTTSYN_TGT_H(1) */ + wr32(hw, I40E_PRTTSYN_TGT_H(1), ns >> 32); + wr32(hw, I40E_PRTTSYN_CLKO(1), I40E_PTP_HALF_SECOND); + wr32(hw, I40E_PRTTSYN_AUX_1(1), I40E_PRTTSYN_AUX_1_INSTNT); + wr32(hw, I40E_PRTTSYN_AUX_0(1), + I40E_PRTTSYN_AUX_0_OUT_ENABLE_CLK_MOD); +} + +/** + * i40e_ptp_adjtime - Adjust the PHC time + * @ptp: The PTP clock structure + * @delta: Offset in nanoseconds to adjust the PHC time by + * + * Adjust the current clock time by a delta specified in nanoseconds. + **/ +static int i40e_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); + struct i40e_hw *hw = &pf->hw; + + mutex_lock(&pf->tmreg_lock); + + if (delta > -999999900LL && delta < 999999900LL) { + int neg_adj = 0; + u32 timadj; + u64 tohw; + + if (delta < 0) { + neg_adj = 1; + tohw = -delta; + } else { + tohw = delta; + } + + timadj = tohw & 0x3FFFFFFF; + if (neg_adj) + timadj |= I40E_ISGN; + wr32(hw, I40E_PRTTSYN_ADJ, timadj); + } else { + struct timespec64 then, now; + + then = ns_to_timespec64(delta); + i40e_ptp_read(pf, &now, NULL); + now = timespec64_add(now, then); + i40e_ptp_write(pf, (const struct timespec64 *)&now); + i40e_ptp_set_1pps_signal_hw(pf); + } + + mutex_unlock(&pf->tmreg_lock); + + return 0; +} + +/** + * i40e_ptp_gettimex - Get the time of the PHC + * @ptp: The PTP clock structure + * @ts: timespec structure to hold the current time value + * @sts: structure to hold the system time before and after reading the PHC + * + * Read the device clock and return the correct value on ns, after converting it + * into a timespec struct. + **/ +static int i40e_ptp_gettimex(struct ptp_clock_info *ptp, struct timespec64 *ts, + struct ptp_system_timestamp *sts) +{ + struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); + + mutex_lock(&pf->tmreg_lock); + i40e_ptp_read(pf, ts, sts); + mutex_unlock(&pf->tmreg_lock); + + return 0; +} + +/** + * i40e_ptp_settime - Set the time of the PHC + * @ptp: The PTP clock structure + * @ts: timespec64 structure that holds the new time value + * + * Set the device clock to the user input value. The conversion from timespec + * to ns happens in the write function. + **/ +static int i40e_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); + + mutex_lock(&pf->tmreg_lock); + i40e_ptp_write(pf, ts); + mutex_unlock(&pf->tmreg_lock); + + return 0; +} + +/** + * i40e_pps_configure - configure PPS events + * @ptp: ptp clock + * @rq: clock request + * @on: status + * + * Configure PPS events for external clock source. + * Return 0 on success or error on failure. + **/ +static int i40e_pps_configure(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, + int on) +{ + struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); + + if (!!on) + i40e_ptp_set_1pps_signal_hw(pf); + + return 0; +} + +/** + * i40e_pin_state - determine PIN state + * @index: PIN index + * @func: function assigned to PIN + * + * Determine PIN state based on PIN index and function assigned. + * Return PIN state. + **/ +static enum i40e_ptp_gpio_pin_state i40e_pin_state(int index, int func) +{ + enum i40e_ptp_gpio_pin_state state = off; + + if (index == 0 && func == PTP_PF_EXTTS) + state = in_A; + if (index == 1 && func == PTP_PF_EXTTS) + state = in_B; + if (index == 0 && func == PTP_PF_PEROUT) + state = out_A; + if (index == 1 && func == PTP_PF_PEROUT) + state = out_B; + + return state; +} + +/** + * i40e_ptp_enable_pin - enable PINs. + * @pf: private board structure + * @chan: channel + * @func: PIN function + * @on: state + * + * Enable PTP pins for external clock source. + * Return 0 on success or error code on failure. + **/ +static int i40e_ptp_enable_pin(struct i40e_pf *pf, unsigned int chan, + enum ptp_pin_function func, int on) +{ + enum i40e_ptp_gpio_pin_state *pin = NULL; + struct i40e_ptp_pins_settings pins; + int pin_index; + + /* Use PF0 to set pins. Return success for user space tools */ + if (pf->hw.pf_id) + return 0; + + /* Preserve previous state of pins that we don't touch */ + pins.sdp3_2 = pf->ptp_pins->sdp3_2; + pins.sdp3_3 = pf->ptp_pins->sdp3_3; + pins.gpio_4 = pf->ptp_pins->gpio_4; + + /* To turn on the pin - find the corresponding one based on + * the given index. To to turn the function off - find + * which pin had it assigned. Don't use ptp_find_pin here + * because it tries to lock the pincfg_mux which is locked by + * ptp_pin_store() that calls here. + */ + if (on) { + pin_index = ptp_find_pin(pf->ptp_clock, func, chan); + if (pin_index < 0) + return -EBUSY; + + switch (pin_index) { + case SDP3_2: + pin = &pins.sdp3_2; + break; + case SDP3_3: + pin = &pins.sdp3_3; + break; + case GPIO_4: + pin = &pins.gpio_4; + break; + default: + return -EINVAL; + } + + *pin = i40e_pin_state(chan, func); + } else { + pins.sdp3_2 = off; + pins.sdp3_3 = off; + pins.gpio_4 = off; + } + + return i40e_ptp_set_pins(pf, &pins) ? -EINVAL : 0; +} + +/** + * i40e_ptp_feature_enable - Enable external clock pins + * @ptp: The PTP clock structure + * @rq: The PTP clock request structure + * @on: To turn feature on/off + * + * Setting on/off PTP PPS feature for pin. + **/ +static int i40e_ptp_feature_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, + int on) +{ + struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); + + enum ptp_pin_function func; + unsigned int chan; + + /* TODO: Implement flags handling for EXTTS and PEROUT */ + switch (rq->type) { + case PTP_CLK_REQ_EXTTS: + func = PTP_PF_EXTTS; + chan = rq->extts.index; + break; + case PTP_CLK_REQ_PEROUT: + func = PTP_PF_PEROUT; + chan = rq->perout.index; + break; + case PTP_CLK_REQ_PPS: + return i40e_pps_configure(ptp, rq, on); + default: + return -EOPNOTSUPP; + } + + return i40e_ptp_enable_pin(pf, chan, func, on); +} + +/** + * i40e_ptp_get_rx_events - Read I40E_PRTTSYN_STAT_1 and latch events + * @pf: the PF data structure + * + * This function reads I40E_PRTTSYN_STAT_1 and updates the corresponding timers + * for noticed latch events. This allows the driver to keep track of the first + * time a latch event was noticed which will be used to help clear out Rx + * timestamps for packets that got dropped or lost. + * + * This function will return the current value of I40E_PRTTSYN_STAT_1 and is + * expected to be called only while under the ptp_rx_lock. + **/ +static u32 i40e_ptp_get_rx_events(struct i40e_pf *pf) +{ + struct i40e_hw *hw = &pf->hw; + u32 prttsyn_stat, new_latch_events; + int i; + + prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_1); + new_latch_events = prttsyn_stat & ~pf->latch_event_flags; + + /* Update the jiffies time for any newly latched timestamp. This + * ensures that we store the time that we first discovered a timestamp + * was latched by the hardware. The service task will later determine + * if we should free the latch and drop that timestamp should too much + * time pass. This flow ensures that we only update jiffies for new + * events latched since the last time we checked, and not all events + * currently latched, so that the service task accounting remains + * accurate. + */ + for (i = 0; i < 4; i++) { + if (new_latch_events & BIT(i)) + pf->latch_events[i] = jiffies; + } + + /* Finally, we store the current status of the Rx timestamp latches */ + pf->latch_event_flags = prttsyn_stat; + + return prttsyn_stat; +} + +/** + * i40e_ptp_rx_hang - Detect error case when Rx timestamp registers are hung + * @pf: The PF private data structure + * + * This watchdog task is scheduled to detect error case where hardware has + * dropped an Rx packet that was timestamped when the ring is full. The + * particular error is rare but leaves the device in a state unable to timestamp + * any future packets. + **/ +void i40e_ptp_rx_hang(struct i40e_pf *pf) +{ + struct i40e_hw *hw = &pf->hw; + unsigned int i, cleared = 0; + + /* Since we cannot turn off the Rx timestamp logic if the device is + * configured for Tx timestamping, we check if Rx timestamping is + * configured. We don't want to spuriously warn about Rx timestamp + * hangs if we don't care about the timestamps. + */ + if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx) + return; + + spin_lock_bh(&pf->ptp_rx_lock); + + /* Update current latch times for Rx events */ + i40e_ptp_get_rx_events(pf); + + /* Check all the currently latched Rx events and see whether they have + * been latched for over a second. It is assumed that any timestamp + * should have been cleared within this time, or else it was captured + * for a dropped frame that the driver never received. Thus, we will + * clear any timestamp that has been latched for over 1 second. + */ + for (i = 0; i < 4; i++) { + if ((pf->latch_event_flags & BIT(i)) && + time_is_before_jiffies(pf->latch_events[i] + HZ)) { + rd32(hw, I40E_PRTTSYN_RXTIME_H(i)); + pf->latch_event_flags &= ~BIT(i); + cleared++; + } + } + + spin_unlock_bh(&pf->ptp_rx_lock); + + /* Log a warning if more than 2 timestamps got dropped in the same + * check. We don't want to warn about all drops because it can occur + * in normal scenarios such as PTP frames on multicast addresses we + * aren't listening to. However, administrator should know if this is + * the reason packets aren't receiving timestamps. + */ + if (cleared > 2) + dev_dbg(&pf->pdev->dev, + "Dropped %d missed RXTIME timestamp events\n", + cleared); + + /* Finally, update the rx_hwtstamp_cleared counter */ + pf->rx_hwtstamp_cleared += cleared; +} + +/** + * i40e_ptp_tx_hang - Detect error case when Tx timestamp register is hung + * @pf: The PF private data structure + * + * This watchdog task is run periodically to make sure that we clear the Tx + * timestamp logic if we don't obtain a timestamp in a reasonable amount of + * time. It is unexpected in the normal case but if it occurs it results in + * permanently preventing timestamps of future packets. + **/ +void i40e_ptp_tx_hang(struct i40e_pf *pf) +{ + struct sk_buff *skb; + + if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_tx) + return; + + /* Nothing to do if we're not already waiting for a timestamp */ + if (!test_bit(__I40E_PTP_TX_IN_PROGRESS, pf->state)) + return; + + /* We already have a handler routine which is run when we are notified + * of a Tx timestamp in the hardware. If we don't get an interrupt + * within a second it is reasonable to assume that we never will. + */ + if (time_is_before_jiffies(pf->ptp_tx_start + HZ)) { + skb = pf->ptp_tx_skb; + pf->ptp_tx_skb = NULL; + clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state); + + /* Free the skb after we clear the bitlock */ + dev_kfree_skb_any(skb); + pf->tx_hwtstamp_timeouts++; + } +} + +/** + * i40e_ptp_tx_hwtstamp - Utility function which returns the Tx timestamp + * @pf: Board private structure + * + * Read the value of the Tx timestamp from the registers, convert it into a + * value consumable by the stack, and store that result into the shhwtstamps + * struct before returning it up the stack. + **/ +void i40e_ptp_tx_hwtstamp(struct i40e_pf *pf) +{ + struct skb_shared_hwtstamps shhwtstamps; + struct sk_buff *skb = pf->ptp_tx_skb; + struct i40e_hw *hw = &pf->hw; + u32 hi, lo; + u64 ns; + + if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_tx) + return; + + /* don't attempt to timestamp if we don't have an skb */ + if (!pf->ptp_tx_skb) + return; + + lo = rd32(hw, I40E_PRTTSYN_TXTIME_L); + hi = rd32(hw, I40E_PRTTSYN_TXTIME_H); + + ns = (((u64)hi) << 32) | lo; + i40e_ptp_convert_to_hwtstamp(&shhwtstamps, ns); + + /* Clear the bit lock as soon as possible after reading the register, + * and prior to notifying the stack via skb_tstamp_tx(). Otherwise + * applications might wake up and attempt to request another transmit + * timestamp prior to the bit lock being cleared. + */ + pf->ptp_tx_skb = NULL; + clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state); + + /* Notify the stack and free the skb after we've unlocked */ + skb_tstamp_tx(skb, &shhwtstamps); + dev_kfree_skb_any(skb); +} + +/** + * i40e_ptp_rx_hwtstamp - Utility function which checks for an Rx timestamp + * @pf: Board private structure + * @skb: Particular skb to send timestamp with + * @index: Index into the receive timestamp registers for the timestamp + * + * The XL710 receives a notification in the receive descriptor with an offset + * into the set of RXTIME registers where the timestamp is for that skb. This + * function goes and fetches the receive timestamp from that offset, if a valid + * one exists. The RXTIME registers are in ns, so we must convert the result + * first. + **/ +void i40e_ptp_rx_hwtstamp(struct i40e_pf *pf, struct sk_buff *skb, u8 index) +{ + u32 prttsyn_stat, hi, lo; + struct i40e_hw *hw; + u64 ns; + + /* Since we cannot turn off the Rx timestamp logic if the device is + * doing Tx timestamping, check if Rx timestamping is configured. + */ + if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx) + return; + + hw = &pf->hw; + + spin_lock_bh(&pf->ptp_rx_lock); + + /* Get current Rx events and update latch times */ + prttsyn_stat = i40e_ptp_get_rx_events(pf); + + /* TODO: Should we warn about missing Rx timestamp event? */ + if (!(prttsyn_stat & BIT(index))) { + spin_unlock_bh(&pf->ptp_rx_lock); + return; + } + + /* Clear the latched event since we're about to read its register */ + pf->latch_event_flags &= ~BIT(index); + + lo = rd32(hw, I40E_PRTTSYN_RXTIME_L(index)); + hi = rd32(hw, I40E_PRTTSYN_RXTIME_H(index)); + + spin_unlock_bh(&pf->ptp_rx_lock); + + ns = (((u64)hi) << 32) | lo; + + i40e_ptp_convert_to_hwtstamp(skb_hwtstamps(skb), ns); +} + +/** + * i40e_ptp_set_increment - Utility function to update clock increment rate + * @pf: Board private structure + * + * During a link change, the DMA frequency that drives the 1588 logic will + * change. In order to keep the PRTTSYN_TIME registers in units of nanoseconds, + * we must update the increment value per clock tick. + **/ +void i40e_ptp_set_increment(struct i40e_pf *pf) +{ + struct i40e_link_status *hw_link_info; + struct i40e_hw *hw = &pf->hw; + u64 incval; + u32 mult; + + hw_link_info = &hw->phy.link_info; + + i40e_aq_get_link_info(&pf->hw, true, NULL, NULL); + + switch (hw_link_info->link_speed) { + case I40E_LINK_SPEED_10GB: + mult = I40E_PTP_10GB_INCVAL_MULT; + break; + case I40E_LINK_SPEED_5GB: + mult = I40E_PTP_5GB_INCVAL_MULT; + break; + case I40E_LINK_SPEED_1GB: + mult = I40E_PTP_1GB_INCVAL_MULT; + break; + case I40E_LINK_SPEED_100MB: + { + static int warn_once; + + if (!warn_once) { + dev_warn(&pf->pdev->dev, + "1588 functionality is not supported at 100 Mbps. Stopping the PHC.\n"); + warn_once++; + } + mult = 0; + break; + } + case I40E_LINK_SPEED_40GB: + default: + mult = 1; + break; + } + + /* The increment value is calculated by taking the base 40GbE incvalue + * and multiplying it by a factor based on the link speed. + */ + incval = I40E_PTP_40GB_INCVAL * mult; + + /* Write the new increment value into the increment register. The + * hardware will not update the clock until both registers have been + * written. + */ + wr32(hw, I40E_PRTTSYN_INC_L, incval & 0xFFFFFFFF); + wr32(hw, I40E_PRTTSYN_INC_H, incval >> 32); + + /* Update the base adjustement value. */ + WRITE_ONCE(pf->ptp_adj_mult, mult); + smp_mb(); /* Force the above update. */ +} + +/** + * i40e_ptp_get_ts_config - ioctl interface to read the HW timestamping + * @pf: Board private structure + * @ifr: ioctl data + * + * Obtain the current hardware timestamping settigs as requested. To do this, + * keep a shadow copy of the timestamp settings rather than attempting to + * deconstruct it from the registers. + **/ +int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr) +{ + struct hwtstamp_config *config = &pf->tstamp_config; + + if (!(pf->flags & I40E_FLAG_PTP)) + return -EOPNOTSUPP; + + return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? + -EFAULT : 0; +} + +/** + * i40e_ptp_free_pins - free memory used by PTP pins + * @pf: Board private structure + * + * Release memory allocated for PTP pins. + **/ +static void i40e_ptp_free_pins(struct i40e_pf *pf) +{ + if (i40e_is_ptp_pin_dev(&pf->hw)) { + kfree(pf->ptp_pins); + kfree(pf->ptp_caps.pin_config); + pf->ptp_pins = NULL; + } +} + +/** + * i40e_ptp_set_pin_hw - Set HW GPIO pin + * @hw: pointer to the hardware structure + * @pin: pin index + * @state: pin state + * + * Set status of GPIO pin for external clock handling. + **/ +static void i40e_ptp_set_pin_hw(struct i40e_hw *hw, + unsigned int pin, + enum i40e_ptp_gpio_pin_state state) +{ + switch (state) { + case off: + wr32(hw, I40E_GLGEN_GPIO_CTL(pin), 0); + break; + case in_A: + wr32(hw, I40E_GLGEN_GPIO_CTL(pin), + I40E_GLGEN_GPIO_CTL_PORT_0_IN_TIMESYNC_0); + break; + case in_B: + wr32(hw, I40E_GLGEN_GPIO_CTL(pin), + I40E_GLGEN_GPIO_CTL_PORT_1_IN_TIMESYNC_0); + break; + case out_A: + wr32(hw, I40E_GLGEN_GPIO_CTL(pin), + I40E_GLGEN_GPIO_CTL_PORT_0_OUT_TIMESYNC_1); + break; + case out_B: + wr32(hw, I40E_GLGEN_GPIO_CTL(pin), + I40E_GLGEN_GPIO_CTL_PORT_1_OUT_TIMESYNC_1); + break; + default: + break; + } +} + +/** + * i40e_ptp_set_led_hw - Set HW GPIO led + * @hw: pointer to the hardware structure + * @led: led index + * @state: led state + * + * Set status of GPIO led for external clock handling. + **/ +static void i40e_ptp_set_led_hw(struct i40e_hw *hw, + unsigned int led, + enum i40e_ptp_led_pin_state state) +{ + switch (state) { + case low: + wr32(hw, I40E_GLGEN_GPIO_SET, + I40E_GLGEN_GPIO_SET_DRV_SDP_DATA | led); + break; + case high: + wr32(hw, I40E_GLGEN_GPIO_SET, + I40E_GLGEN_GPIO_SET_DRV_SDP_DATA | + I40E_GLGEN_GPIO_SET_SDP_DATA_HI | led); + break; + default: + break; + } +} + +/** + * i40e_ptp_init_leds_hw - init LEDs + * @hw: pointer to a hardware structure + * + * Set initial state of LEDs + **/ +static void i40e_ptp_init_leds_hw(struct i40e_hw *hw) +{ + wr32(hw, I40E_GLGEN_GPIO_CTL(I40E_LED2_0), + I40E_GLGEN_GPIO_CTL_LED_INIT); + wr32(hw, I40E_GLGEN_GPIO_CTL(I40E_LED2_1), + I40E_GLGEN_GPIO_CTL_LED_INIT); + wr32(hw, I40E_GLGEN_GPIO_CTL(I40E_LED3_0), + I40E_GLGEN_GPIO_CTL_LED_INIT); + wr32(hw, I40E_GLGEN_GPIO_CTL(I40E_LED3_1), + I40E_GLGEN_GPIO_CTL_LED_INIT); +} + +/** + * i40e_ptp_set_pins_hw - Set HW GPIO pins + * @pf: Board private structure + * + * This function sets GPIO pins for PTP + **/ +static void i40e_ptp_set_pins_hw(struct i40e_pf *pf) +{ + const struct i40e_ptp_pins_settings *pins = pf->ptp_pins; + struct i40e_hw *hw = &pf->hw; + + /* pin must be disabled before it may be used */ + i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, off); + i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, off); + i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, off); + + i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, pins->sdp3_2); + i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, pins->sdp3_3); + i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, pins->gpio_4); + + i40e_ptp_set_led_hw(hw, I40E_LED2_0, pins->led2_0); + i40e_ptp_set_led_hw(hw, I40E_LED2_1, pins->led2_1); + i40e_ptp_set_led_hw(hw, I40E_LED3_0, pins->led3_0); + i40e_ptp_set_led_hw(hw, I40E_LED3_1, pins->led3_1); + + dev_info(&pf->pdev->dev, + "PTP configuration set to: SDP3_2: %s, SDP3_3: %s, GPIO_4: %s.\n", + i40e_ptp_gpio_pin_state2str[pins->sdp3_2], + i40e_ptp_gpio_pin_state2str[pins->sdp3_3], + i40e_ptp_gpio_pin_state2str[pins->gpio_4]); +} + +/** + * i40e_ptp_set_pins - set PTP pins in HW + * @pf: Board private structure + * @pins: PTP pins to be applied + * + * Validate and set PTP pins in HW for specific PF. + * Return 0 on success or negative value on error. + **/ +static int i40e_ptp_set_pins(struct i40e_pf *pf, + struct i40e_ptp_pins_settings *pins) +{ + enum i40e_can_set_pins_t pin_caps = i40e_can_set_pins(pf); + int i = 0; + + if (pin_caps == CANT_DO_PINS) + return -EOPNOTSUPP; + else if (pin_caps == CAN_DO_PINS) + return 0; + + if (pins->sdp3_2 == invalid) + pins->sdp3_2 = pf->ptp_pins->sdp3_2; + if (pins->sdp3_3 == invalid) + pins->sdp3_3 = pf->ptp_pins->sdp3_3; + if (pins->gpio_4 == invalid) + pins->gpio_4 = pf->ptp_pins->gpio_4; + while (i40e_ptp_pin_led_allowed_states[i].sdp3_2 != end) { + if (pins->sdp3_2 == i40e_ptp_pin_led_allowed_states[i].sdp3_2 && + pins->sdp3_3 == i40e_ptp_pin_led_allowed_states[i].sdp3_3 && + pins->gpio_4 == i40e_ptp_pin_led_allowed_states[i].gpio_4) { + pins->led2_0 = + i40e_ptp_pin_led_allowed_states[i].led2_0; + pins->led2_1 = + i40e_ptp_pin_led_allowed_states[i].led2_1; + pins->led3_0 = + i40e_ptp_pin_led_allowed_states[i].led3_0; + pins->led3_1 = + i40e_ptp_pin_led_allowed_states[i].led3_1; + break; + } + i++; + } + if (i40e_ptp_pin_led_allowed_states[i].sdp3_2 == end) { + dev_warn(&pf->pdev->dev, + "Unsupported PTP pin configuration: SDP3_2: %s, SDP3_3: %s, GPIO_4: %s.\n", + i40e_ptp_gpio_pin_state2str[pins->sdp3_2], + i40e_ptp_gpio_pin_state2str[pins->sdp3_3], + i40e_ptp_gpio_pin_state2str[pins->gpio_4]); + + return -EPERM; + } + memcpy(pf->ptp_pins, pins, sizeof(*pins)); + i40e_ptp_set_pins_hw(pf); + i40_ptp_reset_timing_events(pf); + + return 0; +} + +/** + * i40e_ptp_alloc_pins - allocate PTP pins structure + * @pf: Board private structure + * + * allocate PTP pins structure + **/ +int i40e_ptp_alloc_pins(struct i40e_pf *pf) +{ + if (!i40e_is_ptp_pin_dev(&pf->hw)) + return 0; + + pf->ptp_pins = + kzalloc(sizeof(struct i40e_ptp_pins_settings), GFP_KERNEL); + + if (!pf->ptp_pins) { + dev_warn(&pf->pdev->dev, "Cannot allocate memory for PTP pins structure.\n"); + return -ENOMEM; + } + + pf->ptp_pins->sdp3_2 = off; + pf->ptp_pins->sdp3_3 = off; + pf->ptp_pins->gpio_4 = off; + pf->ptp_pins->led2_0 = high; + pf->ptp_pins->led2_1 = high; + pf->ptp_pins->led3_0 = high; + pf->ptp_pins->led3_1 = high; + + /* Use PF0 to set pins in HW. Return success for user space tools */ + if (pf->hw.pf_id) + return 0; + + i40e_ptp_init_leds_hw(&pf->hw); + i40e_ptp_set_pins_hw(pf); + + return 0; +} + +/** + * i40e_ptp_set_timestamp_mode - setup hardware for requested timestamp mode + * @pf: Board private structure + * @config: hwtstamp settings requested or saved + * + * Control hardware registers to enter the specific mode requested by the + * user. Also used during reset path to ensure that timestamp settings are + * maintained. + * + * Note: modifies config in place, and may update the requested mode to be + * more broad if the specific filter is not directly supported. + **/ +static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf, + struct hwtstamp_config *config) +{ + struct i40e_hw *hw = &pf->hw; + u32 tsyntype, regval; + + /* Selects external trigger to cause event */ + regval = rd32(hw, I40E_PRTTSYN_AUX_0(0)); + /* Bit 17:16 is EVNTLVL, 01B rising edge */ + regval &= 0; + regval |= (1 << I40E_PRTTSYN_AUX_0_EVNTLVL_SHIFT); + /* regval: 0001 0000 0000 0000 0000 */ + wr32(hw, I40E_PRTTSYN_AUX_0(0), regval); + + /* Enabel interrupts */ + regval = rd32(hw, I40E_PRTTSYN_CTL0); + regval |= 1 << I40E_PRTTSYN_CTL0_EVENT_INT_ENA_SHIFT; + wr32(hw, I40E_PRTTSYN_CTL0, regval); + + INIT_WORK(&pf->ptp_extts0_work, i40e_ptp_extts0_work); + + switch (config->tx_type) { + case HWTSTAMP_TX_OFF: + pf->ptp_tx = false; + break; + case HWTSTAMP_TX_ON: + pf->ptp_tx = true; + break; + default: + return -ERANGE; + } + + switch (config->rx_filter) { + case HWTSTAMP_FILTER_NONE: + pf->ptp_rx = false; + /* We set the type to V1, but do not enable UDP packet + * recognition. In this way, we should be as close to + * disabling PTP Rx timestamps as possible since V1 packets + * are always UDP, since L2 packets are a V2 feature. + */ + tsyntype = I40E_PRTTSYN_CTL1_TSYNTYPE_V1; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + if (!(pf->hw_features & I40E_HW_PTP_L4_CAPABLE)) + return -ERANGE; + pf->ptp_rx = true; + tsyntype = I40E_PRTTSYN_CTL1_V1MESSTYPE0_MASK | + I40E_PRTTSYN_CTL1_TSYNTYPE_V1 | + I40E_PRTTSYN_CTL1_UDP_ENA_MASK; + config->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; + break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + if (!(pf->hw_features & I40E_HW_PTP_L4_CAPABLE)) + return -ERANGE; + fallthrough; + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + pf->ptp_rx = true; + tsyntype = I40E_PRTTSYN_CTL1_V2MESSTYPE0_MASK | + I40E_PRTTSYN_CTL1_TSYNTYPE_V2; + if (pf->hw_features & I40E_HW_PTP_L4_CAPABLE) { + tsyntype |= I40E_PRTTSYN_CTL1_UDP_ENA_MASK; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + } else { + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + } + break; + case HWTSTAMP_FILTER_NTP_ALL: + case HWTSTAMP_FILTER_ALL: + default: + return -ERANGE; + } + + /* Clear out all 1588-related registers to clear and unlatch them. */ + spin_lock_bh(&pf->ptp_rx_lock); + rd32(hw, I40E_PRTTSYN_STAT_0); + rd32(hw, I40E_PRTTSYN_TXTIME_H); + rd32(hw, I40E_PRTTSYN_RXTIME_H(0)); + rd32(hw, I40E_PRTTSYN_RXTIME_H(1)); + rd32(hw, I40E_PRTTSYN_RXTIME_H(2)); + rd32(hw, I40E_PRTTSYN_RXTIME_H(3)); + pf->latch_event_flags = 0; + spin_unlock_bh(&pf->ptp_rx_lock); + + /* Enable/disable the Tx timestamp interrupt based on user input. */ + regval = rd32(hw, I40E_PRTTSYN_CTL0); + if (pf->ptp_tx) + regval |= I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK; + else + regval &= ~I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK; + wr32(hw, I40E_PRTTSYN_CTL0, regval); + + regval = rd32(hw, I40E_PFINT_ICR0_ENA); + if (pf->ptp_tx) + regval |= I40E_PFINT_ICR0_ENA_TIMESYNC_MASK; + else + regval &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK; + wr32(hw, I40E_PFINT_ICR0_ENA, regval); + + /* Although there is no simple on/off switch for Rx, we "disable" Rx + * timestamps by setting to V1 only mode and clear the UDP + * recognition. This ought to disable all PTP Rx timestamps as V1 + * packets are always over UDP. Note that software is configured to + * ignore Rx timestamps via the pf->ptp_rx flag. + */ + regval = rd32(hw, I40E_PRTTSYN_CTL1); + /* clear everything but the enable bit */ + regval &= I40E_PRTTSYN_CTL1_TSYNENA_MASK; + /* now enable bits for desired Rx timestamps */ + regval |= tsyntype; + wr32(hw, I40E_PRTTSYN_CTL1, regval); + + return 0; +} + +/** + * i40e_ptp_set_ts_config - ioctl interface to control the HW timestamping + * @pf: Board private structure + * @ifr: ioctl data + * + * Respond to the user filter requests and make the appropriate hardware + * changes here. The XL710 cannot support splitting of the Tx/Rx timestamping + * logic, so keep track in software of whether to indicate these timestamps + * or not. + * + * It is permissible to "upgrade" the user request to a broader filter, as long + * as the user receives the timestamps they care about and the user is notified + * the filter has been broadened. + **/ +int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr) +{ + struct hwtstamp_config config; + int err; + + if (!(pf->flags & I40E_FLAG_PTP)) + return -EOPNOTSUPP; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + err = i40e_ptp_set_timestamp_mode(pf, &config); + if (err) + return err; + + /* save these settings for future reference */ + pf->tstamp_config = config; + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +/** + * i40e_init_pin_config - initialize pins. + * @pf: private board structure + * + * Initialize pins for external clock source. + * Return 0 on success or error code on failure. + **/ +static int i40e_init_pin_config(struct i40e_pf *pf) +{ + int i; + + pf->ptp_caps.n_pins = 3; + pf->ptp_caps.n_ext_ts = 2; + pf->ptp_caps.pps = 1; + pf->ptp_caps.n_per_out = 2; + + pf->ptp_caps.pin_config = kcalloc(pf->ptp_caps.n_pins, + sizeof(*pf->ptp_caps.pin_config), + GFP_KERNEL); + if (!pf->ptp_caps.pin_config) + return -ENOMEM; + + for (i = 0; i < pf->ptp_caps.n_pins; i++) { + snprintf(pf->ptp_caps.pin_config[i].name, + sizeof(pf->ptp_caps.pin_config[i].name), + "%s", sdp_desc[i].name); + pf->ptp_caps.pin_config[i].index = sdp_desc[i].index; + pf->ptp_caps.pin_config[i].func = PTP_PF_NONE; + pf->ptp_caps.pin_config[i].chan = sdp_desc[i].chan; + } + + pf->ptp_caps.verify = i40e_ptp_verify; + pf->ptp_caps.enable = i40e_ptp_feature_enable; + + pf->ptp_caps.pps = 1; + + return 0; +} + +/** + * i40e_ptp_create_clock - Create PTP clock device for userspace + * @pf: Board private structure + * + * This function creates a new PTP clock device. It only creates one if we + * don't already have one, so it is safe to call. Will return error if it + * can't create one, but success if we already have a device. Should be used + * by i40e_ptp_init to create clock initially, and prevent global resets from + * creating new clock devices. + **/ +static long i40e_ptp_create_clock(struct i40e_pf *pf) +{ + /* no need to create a clock device if we already have one */ + if (!IS_ERR_OR_NULL(pf->ptp_clock)) + return 0; + + strscpy(pf->ptp_caps.name, i40e_driver_name, + sizeof(pf->ptp_caps.name) - 1); + pf->ptp_caps.owner = THIS_MODULE; + pf->ptp_caps.max_adj = 999999999; + pf->ptp_caps.adjfine = i40e_ptp_adjfine; + pf->ptp_caps.adjtime = i40e_ptp_adjtime; + pf->ptp_caps.gettimex64 = i40e_ptp_gettimex; + pf->ptp_caps.settime64 = i40e_ptp_settime; + if (i40e_is_ptp_pin_dev(&pf->hw)) { + int err = i40e_init_pin_config(pf); + + if (err) + return err; + } + + /* Attempt to register the clock before enabling the hardware. */ + pf->ptp_clock = ptp_clock_register(&pf->ptp_caps, &pf->pdev->dev); + if (IS_ERR(pf->ptp_clock)) + return PTR_ERR(pf->ptp_clock); + + /* clear the hwtstamp settings here during clock create, instead of + * during regular init, so that we can maintain settings across a + * reset or suspend. + */ + pf->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; + pf->tstamp_config.tx_type = HWTSTAMP_TX_OFF; + + /* Set the previous "reset" time to the current Kernel clock time */ + ktime_get_real_ts64(&pf->ptp_prev_hw_time); + pf->ptp_reset_start = ktime_get(); + + return 0; +} + +/** + * i40e_ptp_save_hw_time - Save the current PTP time as ptp_prev_hw_time + * @pf: Board private structure + * + * Read the current PTP time and save it into pf->ptp_prev_hw_time. This should + * be called at the end of preparing to reset, just before hardware reset + * occurs, in order to preserve the PTP time as close as possible across + * resets. + */ +void i40e_ptp_save_hw_time(struct i40e_pf *pf) +{ + /* don't try to access the PTP clock if it's not enabled */ + if (!(pf->flags & I40E_FLAG_PTP)) + return; + + i40e_ptp_gettimex(&pf->ptp_caps, &pf->ptp_prev_hw_time, NULL); + /* Get a monotonic starting time for this reset */ + pf->ptp_reset_start = ktime_get(); +} + +/** + * i40e_ptp_restore_hw_time - Restore the ptp_prev_hw_time + delta to PTP regs + * @pf: Board private structure + * + * Restore the PTP hardware clock registers. We previously cached the PTP + * hardware time as pf->ptp_prev_hw_time. To be as accurate as possible, + * update this value based on the time delta since the time was saved, using + * CLOCK_MONOTONIC (via ktime_get()) to calculate the time difference. + * + * This ensures that the hardware clock is restored to nearly what it should + * have been if a reset had not occurred. + */ +void i40e_ptp_restore_hw_time(struct i40e_pf *pf) +{ + ktime_t delta = ktime_sub(ktime_get(), pf->ptp_reset_start); + + /* Update the previous HW time with the ktime delta */ + timespec64_add_ns(&pf->ptp_prev_hw_time, ktime_to_ns(delta)); + + /* Restore the hardware clock registers */ + i40e_ptp_settime(&pf->ptp_caps, &pf->ptp_prev_hw_time); +} + +/** + * i40e_ptp_init - Initialize the 1588 support after device probe or reset + * @pf: Board private structure + * + * This function sets device up for 1588 support. The first time it is run, it + * will create a PHC clock device. It does not create a clock device if one + * already exists. It also reconfigures the device after a reset. + * + * The first time a clock is created, i40e_ptp_create_clock will set + * pf->ptp_prev_hw_time to the current system time. During resets, it is + * expected that this timespec will be set to the last known PTP clock time, + * in order to preserve the clock time as close as possible across a reset. + **/ +void i40e_ptp_init(struct i40e_pf *pf) +{ + struct net_device *netdev = pf->vsi[pf->lan_vsi]->netdev; + struct i40e_hw *hw = &pf->hw; + u32 pf_id; + long err; + + /* Only one PF is assigned to control 1588 logic per port. Do not + * enable any support for PFs not assigned via PRTTSYN_CTL0.PF_ID + */ + pf_id = (rd32(hw, I40E_PRTTSYN_CTL0) & I40E_PRTTSYN_CTL0_PF_ID_MASK) >> + I40E_PRTTSYN_CTL0_PF_ID_SHIFT; + if (hw->pf_id != pf_id) { + pf->flags &= ~I40E_FLAG_PTP; + dev_info(&pf->pdev->dev, "%s: PTP not supported on %s\n", + __func__, + netdev->name); + return; + } + + mutex_init(&pf->tmreg_lock); + spin_lock_init(&pf->ptp_rx_lock); + + /* ensure we have a clock device */ + err = i40e_ptp_create_clock(pf); + if (err) { + pf->ptp_clock = NULL; + dev_err(&pf->pdev->dev, "%s: ptp_clock_register failed\n", + __func__); + } else if (pf->ptp_clock) { + u32 regval; + + if (pf->hw.debug_mask & I40E_DEBUG_LAN) + dev_info(&pf->pdev->dev, "PHC enabled\n"); + pf->flags |= I40E_FLAG_PTP; + + /* Ensure the clocks are running. */ + regval = rd32(hw, I40E_PRTTSYN_CTL0); + regval |= I40E_PRTTSYN_CTL0_TSYNENA_MASK; + wr32(hw, I40E_PRTTSYN_CTL0, regval); + regval = rd32(hw, I40E_PRTTSYN_CTL1); + regval |= I40E_PRTTSYN_CTL1_TSYNENA_MASK; + wr32(hw, I40E_PRTTSYN_CTL1, regval); + + /* Set the increment value per clock tick. */ + i40e_ptp_set_increment(pf); + + /* reset timestamping mode */ + i40e_ptp_set_timestamp_mode(pf, &pf->tstamp_config); + + /* Restore the clock time based on last known value */ + i40e_ptp_restore_hw_time(pf); + } + + i40e_ptp_set_1pps_signal_hw(pf); +} + +/** + * i40e_ptp_stop - Disable the driver/hardware support and unregister the PHC + * @pf: Board private structure + * + * This function handles the cleanup work required from the initialization by + * clearing out the important information and unregistering the PHC. + **/ +void i40e_ptp_stop(struct i40e_pf *pf) +{ + struct i40e_hw *hw = &pf->hw; + u32 regval; + + pf->flags &= ~I40E_FLAG_PTP; + pf->ptp_tx = false; + pf->ptp_rx = false; + + if (pf->ptp_tx_skb) { + struct sk_buff *skb = pf->ptp_tx_skb; + + pf->ptp_tx_skb = NULL; + clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state); + dev_kfree_skb_any(skb); + } + + if (pf->ptp_clock) { + ptp_clock_unregister(pf->ptp_clock); + pf->ptp_clock = NULL; + dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__, + pf->vsi[pf->lan_vsi]->netdev->name); + } + + if (i40e_is_ptp_pin_dev(&pf->hw)) { + i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, off); + i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, off); + i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, off); + } + + regval = rd32(hw, I40E_PRTTSYN_AUX_0(0)); + regval &= ~I40E_PRTTSYN_AUX_0_PTPFLAG_MASK; + wr32(hw, I40E_PRTTSYN_AUX_0(0), regval); + + /* Disable interrupts */ + regval = rd32(hw, I40E_PRTTSYN_CTL0); + regval &= ~I40E_PRTTSYN_CTL0_EVENT_INT_ENA_MASK; + wr32(hw, I40E_PRTTSYN_CTL0, regval); + + i40e_ptp_free_pins(pf); +} |