diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 17:35:05 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 17:39:31 +0000 |
commit | 85c675d0d09a45a135bddd15d7b385f8758c32fb (patch) | |
tree | 76267dbc9b9a130337be3640948fe397b04ac629 /drivers/net/ethernet/intel/ice/ice_ptp_hw.c | |
parent | Adding upstream version 6.6.15. (diff) | |
download | linux-85c675d0d09a45a135bddd15d7b385f8758c32fb.tar.xz linux-85c675d0d09a45a135bddd15d7b385f8758c32fb.zip |
Adding upstream version 6.7.7.upstream/6.7.7
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/intel/ice/ice_ptp_hw.c')
-rw-r--r-- | drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 812 |
1 files changed, 710 insertions, 102 deletions
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c index f818dd215c..a00b55e14a 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c @@ -7,6 +7,132 @@ #include "ice_ptp_consts.h" #include "ice_cgu_regs.h" +static struct dpll_pin_frequency ice_cgu_pin_freq_common[] = { + DPLL_PIN_FREQUENCY_1PPS, + DPLL_PIN_FREQUENCY_10MHZ, +}; + +static struct dpll_pin_frequency ice_cgu_pin_freq_1_hz[] = { + DPLL_PIN_FREQUENCY_1PPS, +}; + +static struct dpll_pin_frequency ice_cgu_pin_freq_10_mhz[] = { + DPLL_PIN_FREQUENCY_10MHZ, +}; + +static const struct ice_cgu_pin_desc ice_e810t_sfp_cgu_inputs[] = { + { "CVL-SDP22", ZL_REF0P, DPLL_PIN_TYPE_INT_OSCILLATOR, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "CVL-SDP20", ZL_REF0N, DPLL_PIN_TYPE_INT_OSCILLATOR, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "C827_0-RCLKA", ZL_REF1P, DPLL_PIN_TYPE_MUX, 0, }, + { "C827_0-RCLKB", ZL_REF1N, DPLL_PIN_TYPE_MUX, 0, }, + { "SMA1", ZL_REF3P, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "SMA2/U.FL2", ZL_REF3N, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "GNSS-1PPS", ZL_REF4P, DPLL_PIN_TYPE_GNSS, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, + { "OCXO", ZL_REF4N, DPLL_PIN_TYPE_INT_OSCILLATOR, 0, }, +}; + +static const struct ice_cgu_pin_desc ice_e810t_qsfp_cgu_inputs[] = { + { "CVL-SDP22", ZL_REF0P, DPLL_PIN_TYPE_INT_OSCILLATOR, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "CVL-SDP20", ZL_REF0N, DPLL_PIN_TYPE_INT_OSCILLATOR, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "C827_0-RCLKA", ZL_REF1P, DPLL_PIN_TYPE_MUX, }, + { "C827_0-RCLKB", ZL_REF1N, DPLL_PIN_TYPE_MUX, }, + { "C827_1-RCLKA", ZL_REF2P, DPLL_PIN_TYPE_MUX, }, + { "C827_1-RCLKB", ZL_REF2N, DPLL_PIN_TYPE_MUX, }, + { "SMA1", ZL_REF3P, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "SMA2/U.FL2", ZL_REF3N, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "GNSS-1PPS", ZL_REF4P, DPLL_PIN_TYPE_GNSS, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, + { "OCXO", ZL_REF4N, DPLL_PIN_TYPE_INT_OSCILLATOR, }, +}; + +static const struct ice_cgu_pin_desc ice_e810t_sfp_cgu_outputs[] = { + { "REF-SMA1", ZL_OUT0, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "REF-SMA2/U.FL2", ZL_OUT1, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "PHY-CLK", ZL_OUT2, DPLL_PIN_TYPE_SYNCE_ETH_PORT, }, + { "MAC-CLK", ZL_OUT3, DPLL_PIN_TYPE_SYNCE_ETH_PORT, }, + { "CVL-SDP21", ZL_OUT4, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, + { "CVL-SDP23", ZL_OUT5, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, +}; + +static const struct ice_cgu_pin_desc ice_e810t_qsfp_cgu_outputs[] = { + { "REF-SMA1", ZL_OUT0, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "REF-SMA2/U.FL2", ZL_OUT1, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "PHY-CLK", ZL_OUT2, DPLL_PIN_TYPE_SYNCE_ETH_PORT, 0 }, + { "PHY2-CLK", ZL_OUT3, DPLL_PIN_TYPE_SYNCE_ETH_PORT, 0 }, + { "MAC-CLK", ZL_OUT4, DPLL_PIN_TYPE_SYNCE_ETH_PORT, 0 }, + { "CVL-SDP21", ZL_OUT5, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, + { "CVL-SDP23", ZL_OUT6, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, +}; + +static const struct ice_cgu_pin_desc ice_e823_si_cgu_inputs[] = { + { "NONE", SI_REF0P, 0, 0 }, + { "NONE", SI_REF0N, 0, 0 }, + { "SYNCE0_DP", SI_REF1P, DPLL_PIN_TYPE_MUX, 0 }, + { "SYNCE0_DN", SI_REF1N, DPLL_PIN_TYPE_MUX, 0 }, + { "EXT_CLK_SYNC", SI_REF2P, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "NONE", SI_REF2N, 0, 0 }, + { "EXT_PPS_OUT", SI_REF3, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "INT_PPS_OUT", SI_REF4, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, +}; + +static const struct ice_cgu_pin_desc ice_e823_si_cgu_outputs[] = { + { "1588-TIME_SYNC", SI_OUT0, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "PHY-CLK", SI_OUT1, DPLL_PIN_TYPE_SYNCE_ETH_PORT, 0 }, + { "10MHZ-SMA2", SI_OUT2, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_10_mhz), ice_cgu_pin_freq_10_mhz }, + { "PPS-SMA1", SI_OUT3, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, +}; + +static const struct ice_cgu_pin_desc ice_e823_zl_cgu_inputs[] = { + { "NONE", ZL_REF0P, 0, 0 }, + { "INT_PPS_OUT", ZL_REF0N, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, + { "SYNCE0_DP", ZL_REF1P, DPLL_PIN_TYPE_MUX, 0 }, + { "SYNCE0_DN", ZL_REF1N, DPLL_PIN_TYPE_MUX, 0 }, + { "NONE", ZL_REF2P, 0, 0 }, + { "NONE", ZL_REF2N, 0, 0 }, + { "EXT_CLK_SYNC", ZL_REF3P, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "NONE", ZL_REF3N, 0, 0 }, + { "EXT_PPS_OUT", ZL_REF4P, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, + { "OCXO", ZL_REF4N, DPLL_PIN_TYPE_INT_OSCILLATOR, 0 }, +}; + +static const struct ice_cgu_pin_desc ice_e823_zl_cgu_outputs[] = { + { "PPS-SMA1", ZL_OUT0, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_1_hz), ice_cgu_pin_freq_1_hz }, + { "10MHZ-SMA2", ZL_OUT1, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_10_mhz), ice_cgu_pin_freq_10_mhz }, + { "PHY-CLK", ZL_OUT2, DPLL_PIN_TYPE_SYNCE_ETH_PORT, 0 }, + { "1588-TIME_REF", ZL_OUT3, DPLL_PIN_TYPE_SYNCE_ETH_PORT, 0 }, + { "CPK-TIME_SYNC", ZL_OUT4, DPLL_PIN_TYPE_EXT, + ARRAY_SIZE(ice_cgu_pin_freq_common), ice_cgu_pin_freq_common }, + { "NONE", ZL_OUT5, 0, 0 }, +}; + /* Low level functions for interacting with and managing the device clock used * for the Precision Time Protocol. * @@ -107,7 +233,7 @@ static u64 ice_ptp_read_src_incval(struct ice_hw *hw) * * Prepare the source timer for an upcoming timer sync command. */ -static void ice_ptp_src_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) +void ice_ptp_src_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) { u32 cmd_val; u8 tmr_idx; @@ -116,19 +242,19 @@ static void ice_ptp_src_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) cmd_val = tmr_idx << SEL_CPK_SRC; switch (cmd) { - case INIT_TIME: + case ICE_PTP_INIT_TIME: cmd_val |= GLTSYN_CMD_INIT_TIME; break; - case INIT_INCVAL: + case ICE_PTP_INIT_INCVAL: cmd_val |= GLTSYN_CMD_INIT_INCVAL; break; - case ADJ_TIME: + case ICE_PTP_ADJ_TIME: cmd_val |= GLTSYN_CMD_ADJ_TIME; break; - case ADJ_TIME_AT_TIME: + case ICE_PTP_ADJ_TIME_AT_TIME: cmd_val |= GLTSYN_CMD_ADJ_INIT_TIME; break; - case READ_TIME: + case ICE_PTP_READ_TIME: cmd_val |= GLTSYN_CMD_READ_TIME; break; case ICE_PTP_NOP: @@ -168,9 +294,9 @@ ice_fill_phy_msg_e822(struct ice_sbq_msg_input *msg, u8 port, u16 offset) { int phy_port, phy, quadtype; - phy_port = port % ICE_PORTS_PER_PHY; - phy = port / ICE_PORTS_PER_PHY; - quadtype = (port / ICE_PORTS_PER_QUAD) % ICE_NUM_QUAD_TYPE; + phy_port = port % ICE_PORTS_PER_PHY_E822; + phy = port / ICE_PORTS_PER_PHY_E822; + quadtype = (port / ICE_PORTS_PER_QUAD) % ICE_QUADS_PER_PHY_E822; if (quadtype == 0) { msg->msg_addr_low = P_Q0_L(P_0_BASE + offset, phy_port); @@ -495,20 +621,25 @@ ice_write_64b_phy_reg_e822(struct ice_hw *hw, u8 port, u16 low_addr, u64 val) * Fill a message buffer for accessing a register in a quad shared between * multiple PHYs. */ -static void +static int ice_fill_quad_msg_e822(struct ice_sbq_msg_input *msg, u8 quad, u16 offset) { u32 addr; + if (quad >= ICE_MAX_QUAD) + return -EINVAL; + msg->dest_dev = rmn_0; - if ((quad % ICE_NUM_QUAD_TYPE) == 0) + if ((quad % ICE_QUADS_PER_PHY_E822) == 0) addr = Q_0_BASE + offset; else addr = Q_1_BASE + offset; msg->msg_addr_low = lower_16_bits(addr); msg->msg_addr_high = upper_16_bits(addr); + + return 0; } /** @@ -527,10 +658,10 @@ ice_read_quad_reg_e822(struct ice_hw *hw, u8 quad, u16 offset, u32 *val) struct ice_sbq_msg_input msg = {0}; int err; - if (quad >= ICE_MAX_QUAD) - return -EINVAL; + err = ice_fill_quad_msg_e822(&msg, quad, offset); + if (err) + return err; - ice_fill_quad_msg_e822(&msg, quad, offset); msg.opcode = ice_sbq_msg_rd; err = ice_sbq_rw_reg(hw, &msg); @@ -561,10 +692,10 @@ ice_write_quad_reg_e822(struct ice_hw *hw, u8 quad, u16 offset, u32 val) struct ice_sbq_msg_input msg = {0}; int err; - if (quad >= ICE_MAX_QUAD) - return -EINVAL; + err = ice_fill_quad_msg_e822(&msg, quad, offset); + if (err) + return err; - ice_fill_quad_msg_e822(&msg, quad, offset); msg.opcode = ice_sbq_msg_wr; msg.data = val; @@ -628,29 +759,32 @@ ice_read_phy_tstamp_e822(struct ice_hw *hw, u8 quad, u8 idx, u64 *tstamp) * @quad: the quad to read from * @idx: the timestamp index to reset * - * Clear a timestamp, resetting its valid bit, from the PHY quad block that is - * shared between the internal PHYs on the E822 devices. + * Read the timestamp out of the quad to clear its timestamp status bit from + * the PHY quad block that is shared between the internal PHYs of the E822 + * devices. + * + * Note that unlike E810, software cannot directly write to the quad memory + * bank registers. E822 relies on the ice_get_phy_tx_tstamp_ready() function + * to determine which timestamps are valid. Reading a timestamp auto-clears + * the valid bit. + * + * To directly clear the contents of the timestamp block entirely, discarding + * all timestamp data at once, software should instead use + * ice_ptp_reset_ts_memory_quad_e822(). + * + * This function should only be called on an idx whose bit is set according to + * ice_get_phy_tx_tstamp_ready(). */ static int ice_clear_phy_tstamp_e822(struct ice_hw *hw, u8 quad, u8 idx) { - u16 lo_addr, hi_addr; + u64 unused_tstamp; int err; - lo_addr = (u16)TS_L(Q_REG_TX_MEMORY_BANK_START, idx); - hi_addr = (u16)TS_H(Q_REG_TX_MEMORY_BANK_START, idx); - - err = ice_write_quad_reg_e822(hw, quad, lo_addr, 0); + err = ice_read_phy_tstamp_e822(hw, quad, idx, &unused_tstamp); if (err) { - ice_debug(hw, ICE_DBG_PTP, "Failed to clear low PTP timestamp register, err %d\n", - err); - return err; - } - - err = ice_write_quad_reg_e822(hw, quad, hi_addr, 0); - if (err) { - ice_debug(hw, ICE_DBG_PTP, "Failed to clear high PTP timestamp register, err %d\n", - err); + ice_debug(hw, ICE_DBG_PTP, "Failed to read the timestamp register for quad %u, idx %u, err %d\n", + quad, idx, err); return err; } @@ -1025,7 +1159,7 @@ static int ice_ptp_init_phc_e822(struct ice_hw *hw) * @time: Time to initialize the PHY port clocks to * * Program the PHY port registers with a new initial time value. The port - * clock will be initialized once the driver issues an INIT_TIME sync + * clock will be initialized once the driver issues an ICE_PTP_INIT_TIME sync * command. The time value is the upper 32 bits of the PHY timer, usually in * units of nominal nanoseconds. */ @@ -1074,7 +1208,7 @@ exit_err: * * Program the port for an atomic adjustment by writing the Tx and Rx timer * registers. The atomic adjustment won't be completed until the driver issues - * an ADJ_TIME command. + * an ICE_PTP_ADJ_TIME command. * * Note that time is not in units of nanoseconds. It is in clock time * including the lower sub-nanosecond portion of the port timer. @@ -1127,7 +1261,7 @@ exit_err: * * Prepare the PHY ports for an atomic time adjustment by programming the PHY * Tx and Rx port registers. The actual adjustment is completed by issuing an - * ADJ_TIME or ADJ_TIME_AT_TIME sync command. + * ICE_PTP_ADJ_TIME or ICE_PTP_ADJ_TIME_AT_TIME sync command. */ static int ice_ptp_prep_phy_adj_e822(struct ice_hw *hw, s32 adj) @@ -1162,7 +1296,7 @@ ice_ptp_prep_phy_adj_e822(struct ice_hw *hw, s32 adj) * * Prepare each of the PHY ports for a new increment value by programming the * port's TIMETUS registers. The new increment value will be updated after - * issuing an INIT_INCVAL command. + * issuing an ICE_PTP_INIT_INCVAL command. */ static int ice_ptp_prep_phy_incval_e822(struct ice_hw *hw, u64 incval) @@ -1248,19 +1382,19 @@ ice_ptp_write_port_cmd_e822(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd tmr_idx = ice_get_ptp_src_clock_index(hw); cmd_val = tmr_idx << SEL_PHY_SRC; switch (cmd) { - case INIT_TIME: + case ICE_PTP_INIT_TIME: cmd_val |= PHY_CMD_INIT_TIME; break; - case INIT_INCVAL: + case ICE_PTP_INIT_INCVAL: cmd_val |= PHY_CMD_INIT_INCVAL; break; - case ADJ_TIME: + case ICE_PTP_ADJ_TIME: cmd_val |= PHY_CMD_ADJ_TIME; break; - case READ_TIME: + case ICE_PTP_READ_TIME: cmd_val |= PHY_CMD_READ_TIME; break; - case ADJ_TIME_AT_TIME: + case ICE_PTP_ADJ_TIME_AT_TIME: cmd_val |= PHY_CMD_ADJ_TIME_AT_TIME; break; case ICE_PTP_NOP: @@ -2196,8 +2330,8 @@ int ice_phy_cfg_rx_offset_e822(struct ice_hw *hw, u8 port) * @phy_time: on return, the 64bit PHY timer value * @phc_time: on return, the lower 64bits of PHC time * - * Issue a READ_TIME timer command to simultaneously capture the PHY and PHC - * timer values. + * Issue a ICE_PTP_READ_TIME timer command to simultaneously capture the PHY + * and PHC timer values. */ static int ice_read_phy_and_phc_time_e822(struct ice_hw *hw, u8 port, u64 *phy_time, @@ -2210,15 +2344,15 @@ ice_read_phy_and_phc_time_e822(struct ice_hw *hw, u8 port, u64 *phy_time, tmr_idx = ice_get_ptp_src_clock_index(hw); - /* Prepare the PHC timer for a READ_TIME capture command */ - ice_ptp_src_cmd(hw, READ_TIME); + /* Prepare the PHC timer for a ICE_PTP_READ_TIME capture command */ + ice_ptp_src_cmd(hw, ICE_PTP_READ_TIME); - /* Prepare the PHY timer for a READ_TIME capture command */ - err = ice_ptp_one_port_cmd(hw, port, READ_TIME); + /* Prepare the PHY timer for a ICE_PTP_READ_TIME capture command */ + err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_READ_TIME); if (err) return err; - /* Issue the sync to start the READ_TIME capture */ + /* Issue the sync to start the ICE_PTP_READ_TIME capture */ ice_ptp_exec_tmr_cmd(hw); /* Read the captured PHC time from the shadow time registers */ @@ -2252,10 +2386,11 @@ ice_read_phy_and_phc_time_e822(struct ice_hw *hw, u8 port, u64 *phy_time, * @port: the PHY port to synchronize * * Perform an adjustment to ensure that the PHY and PHC timers are in sync. - * This is done by issuing a READ_TIME command which triggers a simultaneous - * read of the PHY timer and PHC timer. Then we use the difference to - * calculate an appropriate 2s complement addition to add to the PHY timer in - * order to ensure it reads the same value as the primary PHC timer. + * This is done by issuing a ICE_PTP_READ_TIME command which triggers a + * simultaneous read of the PHY timer and PHC timer. Then we use the + * difference to calculate an appropriate 2s complement addition to add + * to the PHY timer in order to ensure it reads the same value as the + * primary PHC timer. */ static int ice_sync_phy_timer_e822(struct ice_hw *hw, u8 port) { @@ -2285,7 +2420,7 @@ static int ice_sync_phy_timer_e822(struct ice_hw *hw, u8 port) if (err) goto err_unlock; - err = ice_ptp_one_port_cmd(hw, port, ADJ_TIME); + err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_ADJ_TIME); if (err) goto err_unlock; @@ -2408,7 +2543,7 @@ int ice_start_phy_timer_e822(struct ice_hw *hw, u8 port) if (err) return err; - err = ice_ptp_one_port_cmd(hw, port, INIT_INCVAL); + err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_INIT_INCVAL); if (err) return err; @@ -2436,7 +2571,7 @@ int ice_start_phy_timer_e822(struct ice_hw *hw, u8 port) if (err) return err; - err = ice_ptp_one_port_cmd(hw, port, INIT_INCVAL); + err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_INIT_INCVAL); if (err) return err; @@ -2685,28 +2820,39 @@ ice_read_phy_tstamp_e810(struct ice_hw *hw, u8 lport, u8 idx, u64 *tstamp) * @lport: the lport to read from * @idx: the timestamp index to reset * - * Clear a timestamp, resetting its valid bit, from the timestamp block of the - * external PHY on the E810 device. + * Read the timestamp and then forcibly overwrite its value to clear the valid + * bit from the timestamp block of the external PHY on the E810 device. + * + * This function should only be called on an idx whose bit is set according to + * ice_get_phy_tx_tstamp_ready(). */ static int ice_clear_phy_tstamp_e810(struct ice_hw *hw, u8 lport, u8 idx) { u32 lo_addr, hi_addr; + u64 unused_tstamp; int err; + err = ice_read_phy_tstamp_e810(hw, lport, idx, &unused_tstamp); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read the timestamp register for lport %u, idx %u, err %d\n", + lport, idx, err); + return err; + } + lo_addr = TS_EXT(LOW_TX_MEMORY_BANK_START, lport, idx); hi_addr = TS_EXT(HIGH_TX_MEMORY_BANK_START, lport, idx); err = ice_write_phy_reg_e810(hw, lo_addr, 0); if (err) { - ice_debug(hw, ICE_DBG_PTP, "Failed to clear low PTP timestamp register, err %d\n", - err); + ice_debug(hw, ICE_DBG_PTP, "Failed to clear low PTP timestamp register for lport %u, idx %u, err %d\n", + lport, idx, err); return err; } err = ice_write_phy_reg_e810(hw, hi_addr, 0); if (err) { - ice_debug(hw, ICE_DBG_PTP, "Failed to clear high PTP timestamp register, err %d\n", - err); + ice_debug(hw, ICE_DBG_PTP, "Failed to clear high PTP timestamp register for lport %u, idx %u, err %d\n", + lport, idx, err); return err; } @@ -2757,7 +2903,7 @@ static int ice_ptp_init_phc_e810(struct ice_hw *hw) * * Program the PHY port ETH_GLTSYN_SHTIME registers in preparation setting the * initial clock time. The time will not actually be programmed until the - * driver issues an INIT_TIME command. + * driver issues an ICE_PTP_INIT_TIME command. * * The time value is the upper 32 bits of the PHY timer, usually in units of * nominal nanoseconds. @@ -2792,7 +2938,7 @@ static int ice_ptp_prep_phy_time_e810(struct ice_hw *hw, u32 time) * * Prepare the PHY port for an atomic adjustment by programming the PHY * ETH_GLTSYN_SHADJ_L and ETH_GLTSYN_SHADJ_H registers. The actual adjustment - * is completed by issuing an ADJ_TIME sync command. + * is completed by issuing an ICE_PTP_ADJ_TIME sync command. * * The adjustment value only contains the portion used for the upper 32bits of * the PHY timer, usually in units of nominal nanoseconds. Negative @@ -2832,7 +2978,7 @@ static int ice_ptp_prep_phy_adj_e810(struct ice_hw *hw, s32 adj) * * Prepare the PHY port for a new increment value by programming the PHY * ETH_GLTSYN_SHADJ_L and ETH_GLTSYN_SHADJ_H registers. The actual change is - * completed by issuing an INIT_INCVAL command. + * completed by issuing an ICE_PTP_INIT_INCVAL command. */ static int ice_ptp_prep_phy_incval_e810(struct ice_hw *hw, u64 incval) { @@ -2875,19 +3021,19 @@ static int ice_ptp_port_cmd_e810(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) int err; switch (cmd) { - case INIT_TIME: + case ICE_PTP_INIT_TIME: cmd_val = GLTSYN_CMD_INIT_TIME; break; - case INIT_INCVAL: + case ICE_PTP_INIT_INCVAL: cmd_val = GLTSYN_CMD_INIT_INCVAL; break; - case ADJ_TIME: + case ICE_PTP_ADJ_TIME: cmd_val = GLTSYN_CMD_ADJ_TIME; break; - case READ_TIME: + case ICE_PTP_READ_TIME: cmd_val = GLTSYN_CMD_READ_TIME; break; - case ADJ_TIME_AT_TIME: + case ICE_PTP_ADJ_TIME_AT_TIME: cmd_val = GLTSYN_CMD_ADJ_INIT_TIME; break; case ICE_PTP_NOP: @@ -3150,6 +3296,21 @@ void ice_ptp_unlock(struct ice_hw *hw) } /** + * ice_ptp_init_phy_model - Initialize hw->phy_model based on device type + * @hw: pointer to the HW structure + * + * Determine the PHY model for the device, and initialize hw->phy_model + * for use by other functions. + */ +void ice_ptp_init_phy_model(struct ice_hw *hw) +{ + if (ice_is_e810(hw)) + hw->phy_model = ICE_PHY_E810; + else + hw->phy_model = ICE_PHY_E822; +} + +/** * ice_ptp_tmr_cmd - Prepare and trigger a timer sync command * @hw: pointer to HW struct * @cmd: the command to issue @@ -3167,10 +3328,17 @@ static int ice_ptp_tmr_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) ice_ptp_src_cmd(hw, cmd); /* Next, prepare the ports */ - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: err = ice_ptp_port_cmd_e810(hw, cmd); - else + break; + case ICE_PHY_E822: err = ice_ptp_port_cmd_e822(hw, cmd); + break; + default: + err = -EOPNOTSUPP; + } + if (err) { ice_debug(hw, ICE_DBG_PTP, "Failed to prepare PHY ports for timer command %u, err %d\n", cmd, err); @@ -3212,14 +3380,21 @@ int ice_ptp_init_time(struct ice_hw *hw, u64 time) /* PHY timers */ /* Fill Rx and Tx ports and send msg to PHY */ - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: err = ice_ptp_prep_phy_time_e810(hw, time & 0xFFFFFFFF); - else + break; + case ICE_PHY_E822: err = ice_ptp_prep_phy_time_e822(hw, time & 0xFFFFFFFF); + break; + default: + err = -EOPNOTSUPP; + } + if (err) return err; - return ice_ptp_tmr_cmd(hw, INIT_TIME); + return ice_ptp_tmr_cmd(hw, ICE_PTP_INIT_TIME); } /** @@ -3232,8 +3407,8 @@ int ice_ptp_init_time(struct ice_hw *hw, u64 time) * * 1) Write the increment value to the source timer shadow registers * 2) Write the increment value to the PHY timer shadow registers - * 3) Issue an INIT_INCVAL timer command to synchronously switch both the - * source and port timers to the new increment value at the next clock + * 3) Issue an ICE_PTP_INIT_INCVAL timer command to synchronously switch both + * the source and port timers to the new increment value at the next clock * cycle. */ int ice_ptp_write_incval(struct ice_hw *hw, u64 incval) @@ -3247,14 +3422,21 @@ int ice_ptp_write_incval(struct ice_hw *hw, u64 incval) wr32(hw, GLTSYN_SHADJ_L(tmr_idx), lower_32_bits(incval)); wr32(hw, GLTSYN_SHADJ_H(tmr_idx), upper_32_bits(incval)); - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: err = ice_ptp_prep_phy_incval_e810(hw, incval); - else + break; + case ICE_PHY_E822: err = ice_ptp_prep_phy_incval_e822(hw, incval); + break; + default: + err = -EOPNOTSUPP; + } + if (err) return err; - return ice_ptp_tmr_cmd(hw, INIT_INCVAL); + return ice_ptp_tmr_cmd(hw, ICE_PTP_INIT_INCVAL); } /** @@ -3288,8 +3470,8 @@ int ice_ptp_write_incval_locked(struct ice_hw *hw, u64 incval) * * 1) Write the adjustment to the source timer shadow registers * 2) Write the adjustment to the PHY timer shadow registers - * 3) Issue an ADJ_TIME timer command to synchronously apply the adjustment to - * both the source and port timers at the next clock cycle. + * 3) Issue an ICE_PTP_ADJ_TIME timer command to synchronously apply the + * adjustment to both the source and port timers at the next clock cycle. */ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj) { @@ -3299,21 +3481,28 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj) tmr_idx = hw->func_caps.ts_func_info.tmr_index_owned; /* Write the desired clock adjustment into the GLTSYN_SHADJ register. - * For an ADJ_TIME command, this set of registers represents the value - * to add to the clock time. It supports subtraction by interpreting - * the value as a 2's complement integer. + * For an ICE_PTP_ADJ_TIME command, this set of registers represents + * the value to add to the clock time. It supports subtraction by + * interpreting the value as a 2's complement integer. */ wr32(hw, GLTSYN_SHADJ_L(tmr_idx), 0); wr32(hw, GLTSYN_SHADJ_H(tmr_idx), adj); - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: err = ice_ptp_prep_phy_adj_e810(hw, adj); - else + break; + case ICE_PHY_E822: err = ice_ptp_prep_phy_adj_e822(hw, adj); + break; + default: + err = -EOPNOTSUPP; + } + if (err) return err; - return ice_ptp_tmr_cmd(hw, ADJ_TIME); + return ice_ptp_tmr_cmd(hw, ICE_PTP_ADJ_TIME); } /** @@ -3329,10 +3518,14 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj) */ int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp) { - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: return ice_read_phy_tstamp_e810(hw, block, idx, tstamp); - else + case ICE_PHY_E822: return ice_read_phy_tstamp_e822(hw, block, idx, tstamp); + default: + return -EOPNOTSUPP; + } } /** @@ -3341,16 +3534,71 @@ int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp) * @block: the block to read from * @idx: the timestamp index to reset * - * Clear a timestamp, resetting its valid bit, from the timestamp block. For - * E822 devices, the block is the quad to clear from. For E810 devices, the - * block is the logical port to clear from. + * Clear a timestamp from the timestamp block, discarding its value without + * returning it. This resets the memory status bit for the timestamp index + * allowing it to be reused for another timestamp in the future. + * + * For E822 devices, the block number is the PHY quad to clear from. For E810 + * devices, the block number is the logical port to clear from. + * + * This function must only be called on a timestamp index whose valid bit is + * set according to ice_get_phy_tx_tstamp_ready(). */ int ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx) { - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: return ice_clear_phy_tstamp_e810(hw, block, idx); - else + case ICE_PHY_E822: return ice_clear_phy_tstamp_e822(hw, block, idx); + default: + return -EOPNOTSUPP; + } +} + +/** + * ice_get_pf_c827_idx - find and return the C827 index for the current pf + * @hw: pointer to the hw struct + * @idx: index of the found C827 PHY + * Return: + * * 0 - success + * * negative - failure + */ +static int ice_get_pf_c827_idx(struct ice_hw *hw, u8 *idx) +{ + struct ice_aqc_get_link_topo cmd; + u8 node_part_number; + u16 node_handle; + int status; + u8 ctx; + + if (hw->mac_type != ICE_MAC_E810) + return -ENODEV; + + if (hw->device_id != ICE_DEV_ID_E810C_QSFP) { + *idx = C827_0; + return 0; + } + + memset(&cmd, 0, sizeof(cmd)); + + ctx = ICE_AQC_LINK_TOPO_NODE_TYPE_PHY << ICE_AQC_LINK_TOPO_NODE_TYPE_S; + ctx |= ICE_AQC_LINK_TOPO_NODE_CTX_PORT << ICE_AQC_LINK_TOPO_NODE_CTX_S; + cmd.addr.topo_params.node_type_ctx = ctx; + + status = ice_aq_get_netlist_node(hw, &cmd, &node_part_number, + &node_handle); + if (status || node_part_number != ICE_AQC_GET_LINK_TOPO_NODE_NR_C827) + return -ENOENT; + + if (node_handle == E810C_QSFP_C827_0_HANDLE) + *idx = C827_0; + else if (node_handle == E810C_QSFP_C827_1_HANDLE) + *idx = C827_1; + else + return -EIO; + + return 0; } /** @@ -3359,10 +3607,14 @@ int ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx) */ void ice_ptp_reset_ts_memory(struct ice_hw *hw) { - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E822: + ice_ptp_reset_ts_memory_e822(hw); + break; + case ICE_PHY_E810: + default: return; - - ice_ptp_reset_ts_memory_e822(hw); + } } /** @@ -3381,10 +3633,14 @@ int ice_ptp_init_phc(struct ice_hw *hw) /* Clear event err indications for auxiliary pins */ (void)rd32(hw, GLTSYN_STAT(src_idx)); - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: return ice_ptp_init_phc_e810(hw); - else + case ICE_PHY_E822: return ice_ptp_init_phc_e822(hw); + default: + return -EOPNOTSUPP; + } } /** @@ -3400,10 +3656,362 @@ int ice_ptp_init_phc(struct ice_hw *hw) */ int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready) { - if (ice_is_e810(hw)) + switch (hw->phy_model) { + case ICE_PHY_E810: return ice_get_phy_tx_tstamp_ready_e810(hw, block, tstamp_ready); - else + case ICE_PHY_E822: return ice_get_phy_tx_tstamp_ready_e822(hw, block, tstamp_ready); + break; + default: + return -EOPNOTSUPP; + } +} + +/** + * ice_cgu_get_pin_desc_e823 - get pin description array + * @hw: pointer to the hw struct + * @input: if request is done against input or output pin + * @size: number of inputs/outputs + * + * Return: pointer to pin description array associated to given hw. + */ +static const struct ice_cgu_pin_desc * +ice_cgu_get_pin_desc_e823(struct ice_hw *hw, bool input, int *size) +{ + static const struct ice_cgu_pin_desc *t; + + if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_ZL30632_80032) { + if (input) { + t = ice_e823_zl_cgu_inputs; + *size = ARRAY_SIZE(ice_e823_zl_cgu_inputs); + } else { + t = ice_e823_zl_cgu_outputs; + *size = ARRAY_SIZE(ice_e823_zl_cgu_outputs); + } + } else if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_SI5383_5384) { + if (input) { + t = ice_e823_si_cgu_inputs; + *size = ARRAY_SIZE(ice_e823_si_cgu_inputs); + } else { + t = ice_e823_si_cgu_outputs; + *size = ARRAY_SIZE(ice_e823_si_cgu_outputs); + } + } else { + t = NULL; + *size = 0; + } + + return t; +} + +/** + * ice_cgu_get_pin_desc - get pin description array + * @hw: pointer to the hw struct + * @input: if request is done against input or output pins + * @size: size of array returned by function + * + * Return: pointer to pin description array associated to given hw. + */ +static const struct ice_cgu_pin_desc * +ice_cgu_get_pin_desc(struct ice_hw *hw, bool input, int *size) +{ + const struct ice_cgu_pin_desc *t = NULL; + + switch (hw->device_id) { + case ICE_DEV_ID_E810C_SFP: + if (input) { + t = ice_e810t_sfp_cgu_inputs; + *size = ARRAY_SIZE(ice_e810t_sfp_cgu_inputs); + } else { + t = ice_e810t_sfp_cgu_outputs; + *size = ARRAY_SIZE(ice_e810t_sfp_cgu_outputs); + } + break; + case ICE_DEV_ID_E810C_QSFP: + if (input) { + t = ice_e810t_qsfp_cgu_inputs; + *size = ARRAY_SIZE(ice_e810t_qsfp_cgu_inputs); + } else { + t = ice_e810t_qsfp_cgu_outputs; + *size = ARRAY_SIZE(ice_e810t_qsfp_cgu_outputs); + } + break; + case ICE_DEV_ID_E823L_10G_BASE_T: + case ICE_DEV_ID_E823L_1GBE: + case ICE_DEV_ID_E823L_BACKPLANE: + case ICE_DEV_ID_E823L_QSFP: + case ICE_DEV_ID_E823L_SFP: + case ICE_DEV_ID_E823C_10G_BASE_T: + case ICE_DEV_ID_E823C_BACKPLANE: + case ICE_DEV_ID_E823C_QSFP: + case ICE_DEV_ID_E823C_SFP: + case ICE_DEV_ID_E823C_SGMII: + t = ice_cgu_get_pin_desc_e823(hw, input, size); + break; + default: + break; + } + + return t; +} + +/** + * ice_cgu_get_pin_type - get pin's type + * @hw: pointer to the hw struct + * @pin: pin index + * @input: if request is done against input or output pin + * + * Return: type of a pin. + */ +enum dpll_pin_type ice_cgu_get_pin_type(struct ice_hw *hw, u8 pin, bool input) +{ + const struct ice_cgu_pin_desc *t; + int t_size; + + t = ice_cgu_get_pin_desc(hw, input, &t_size); + + if (!t) + return 0; + + if (pin >= t_size) + return 0; + + return t[pin].type; +} + +/** + * ice_cgu_get_pin_freq_supp - get pin's supported frequency + * @hw: pointer to the hw struct + * @pin: pin index + * @input: if request is done against input or output pin + * @num: output number of supported frequencies + * + * Get frequency supported number and array of supported frequencies. + * + * Return: array of supported frequencies for given pin. + */ +struct dpll_pin_frequency * +ice_cgu_get_pin_freq_supp(struct ice_hw *hw, u8 pin, bool input, u8 *num) +{ + const struct ice_cgu_pin_desc *t; + int t_size; + + *num = 0; + t = ice_cgu_get_pin_desc(hw, input, &t_size); + if (!t) + return NULL; + if (pin >= t_size) + return NULL; + *num = t[pin].freq_supp_num; + + return t[pin].freq_supp; +} + +/** + * ice_cgu_get_pin_name - get pin's name + * @hw: pointer to the hw struct + * @pin: pin index + * @input: if request is done against input or output pin + * + * Return: + * * null terminated char array with name + * * NULL in case of failure + */ +const char *ice_cgu_get_pin_name(struct ice_hw *hw, u8 pin, bool input) +{ + const struct ice_cgu_pin_desc *t; + int t_size; + + t = ice_cgu_get_pin_desc(hw, input, &t_size); + + if (!t) + return NULL; + + if (pin >= t_size) + return NULL; + + return t[pin].name; +} + +/** + * ice_get_cgu_state - get the state of the DPLL + * @hw: pointer to the hw struct + * @dpll_idx: Index of internal DPLL unit + * @last_dpll_state: last known state of DPLL + * @pin: pointer to a buffer for returning currently active pin + * @ref_state: reference clock state + * @eec_mode: eec mode of the DPLL + * @phase_offset: pointer to a buffer for returning phase offset + * @dpll_state: state of the DPLL (output) + * + * This function will read the state of the DPLL(dpll_idx). Non-null + * 'pin', 'ref_state', 'eec_mode' and 'phase_offset' parameters are used to + * retrieve currently active pin, state, mode and phase_offset respectively. + * + * Return: state of the DPLL + */ +int ice_get_cgu_state(struct ice_hw *hw, u8 dpll_idx, + enum dpll_lock_status last_dpll_state, u8 *pin, + u8 *ref_state, u8 *eec_mode, s64 *phase_offset, + enum dpll_lock_status *dpll_state) +{ + u8 hw_ref_state, hw_dpll_state, hw_eec_mode, hw_config; + s64 hw_phase_offset; + int status; + + status = ice_aq_get_cgu_dpll_status(hw, dpll_idx, &hw_ref_state, + &hw_dpll_state, &hw_config, + &hw_phase_offset, &hw_eec_mode); + if (status) + return status; + + if (pin) + /* current ref pin in dpll_state_refsel_status_X register */ + *pin = hw_config & ICE_AQC_GET_CGU_DPLL_CONFIG_CLK_REF_SEL; + if (phase_offset) + *phase_offset = hw_phase_offset; + if (ref_state) + *ref_state = hw_ref_state; + if (eec_mode) + *eec_mode = hw_eec_mode; + if (!dpll_state) + return 0; + + /* According to ZL DPLL documentation, once state reach LOCKED_HO_ACQ + * it would never return to FREERUN. This aligns to ITU-T G.781 + * Recommendation. We cannot report HOLDOVER as HO memory is cleared + * while switching to another reference. + * Only for situations where previous state was either: "LOCKED without + * HO_ACQ" or "HOLDOVER" we actually back to FREERUN. + */ + if (hw_dpll_state & ICE_AQC_GET_CGU_DPLL_STATUS_STATE_LOCK) { + if (hw_dpll_state & ICE_AQC_GET_CGU_DPLL_STATUS_STATE_HO_READY) + *dpll_state = DPLL_LOCK_STATUS_LOCKED_HO_ACQ; + else + *dpll_state = DPLL_LOCK_STATUS_LOCKED; + } else if (last_dpll_state == DPLL_LOCK_STATUS_LOCKED_HO_ACQ || + last_dpll_state == DPLL_LOCK_STATUS_HOLDOVER) { + *dpll_state = DPLL_LOCK_STATUS_HOLDOVER; + } else { + *dpll_state = DPLL_LOCK_STATUS_UNLOCKED; + } + + return 0; +} + +/** + * ice_get_cgu_rclk_pin_info - get info on available recovered clock pins + * @hw: pointer to the hw struct + * @base_idx: returns index of first recovered clock pin on device + * @pin_num: returns number of recovered clock pins available on device + * + * Based on hw provide caller info about recovery clock pins available on the + * board. + * + * Return: + * * 0 - success, information is valid + * * negative - failure, information is not valid + */ +int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num) +{ + u8 phy_idx; + int ret; + + switch (hw->device_id) { + case ICE_DEV_ID_E810C_SFP: + case ICE_DEV_ID_E810C_QSFP: + + ret = ice_get_pf_c827_idx(hw, &phy_idx); + if (ret) + return ret; + *base_idx = E810T_CGU_INPUT_C827(phy_idx, ICE_RCLKA_PIN); + *pin_num = ICE_E810_RCLK_PINS_NUM; + ret = 0; + break; + case ICE_DEV_ID_E823L_10G_BASE_T: + case ICE_DEV_ID_E823L_1GBE: + case ICE_DEV_ID_E823L_BACKPLANE: + case ICE_DEV_ID_E823L_QSFP: + case ICE_DEV_ID_E823L_SFP: + case ICE_DEV_ID_E823C_10G_BASE_T: + case ICE_DEV_ID_E823C_BACKPLANE: + case ICE_DEV_ID_E823C_QSFP: + case ICE_DEV_ID_E823C_SFP: + case ICE_DEV_ID_E823C_SGMII: + *pin_num = ICE_E822_RCLK_PINS_NUM; + ret = 0; + if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_ZL30632_80032) + *base_idx = ZL_REF1P; + else if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_SI5383_5384) + *base_idx = SI_REF1P; + else + ret = -ENODEV; + + break; + default: + ret = -ENODEV; + break; + } + + return ret; +} + +/** + * ice_cgu_get_output_pin_state_caps - get output pin state capabilities + * @hw: pointer to the hw struct + * @pin_id: id of a pin + * @caps: capabilities to modify + * + * Return: + * * 0 - success, state capabilities were modified + * * negative - failure, capabilities were not modified + */ +int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id, + unsigned long *caps) +{ + bool can_change = true; + + switch (hw->device_id) { + case ICE_DEV_ID_E810C_SFP: + if (pin_id == ZL_OUT2 || pin_id == ZL_OUT3) + can_change = false; + break; + case ICE_DEV_ID_E810C_QSFP: + if (pin_id == ZL_OUT2 || pin_id == ZL_OUT3 || pin_id == ZL_OUT4) + can_change = false; + break; + case ICE_DEV_ID_E823L_10G_BASE_T: + case ICE_DEV_ID_E823L_1GBE: + case ICE_DEV_ID_E823L_BACKPLANE: + case ICE_DEV_ID_E823L_QSFP: + case ICE_DEV_ID_E823L_SFP: + case ICE_DEV_ID_E823C_10G_BASE_T: + case ICE_DEV_ID_E823C_BACKPLANE: + case ICE_DEV_ID_E823C_QSFP: + case ICE_DEV_ID_E823C_SFP: + case ICE_DEV_ID_E823C_SGMII: + if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_ZL30632_80032 && + pin_id == ZL_OUT2) + can_change = false; + else if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_SI5383_5384 && + pin_id == SI_OUT1) + can_change = false; + break; + default: + return -EINVAL; + } + if (can_change) + *caps |= DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE; + else + *caps &= ~DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE; + + return 0; } |