Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1408 insertions, 0 deletions

diff --git a/drivers/net/ethernet/sfc/siena/efx_common.c b/drivers/net/ethernet/sfc/siena/efx_common.c
new file mode 100644
index 0000000000..e4b294b8e9
--- /dev/null
+++ b/drivers/net/ethernet/sfc/siena/efx_common.c
@@ -0,0 +1,1408 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/****************************************************************************
+ * Driver for Solarflare network controllers and boards
+ * Copyright 2018 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include "net_driver.h"
+#include <linux/filter.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <net/gre.h>
+#include "efx_common.h"
+#include "efx_channels.h"
+#include "efx.h"
+#include "mcdi.h"
+#include "selftest.h"
+#include "rx_common.h"
+#include "tx_common.h"
+#include "nic.h"
+#include "mcdi_port_common.h"
+#include "io.h"
+#include "mcdi_pcol.h"
+
+static unsigned int debug = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+			     NETIF_MSG_LINK | NETIF_MSG_IFDOWN |
+			     NETIF_MSG_IFUP | NETIF_MSG_RX_ERR |
+			     NETIF_MSG_TX_ERR | NETIF_MSG_HW);
+module_param(debug, uint, 0);
+MODULE_PARM_DESC(debug, "Bitmapped debugging message enable value");
+
+/* This is the time (in jiffies) between invocations of the hardware
+ * monitor.
+ * On Falcon-based NICs, this will:
+ * - Check the on-board hardware monitor;
+ * - Poll the link state and reconfigure the hardware as necessary.
+ * On Siena-based NICs for power systems with EEH support, this will give EEH a
+ * chance to start.
+ */
+static unsigned int efx_monitor_interval = 1 * HZ;
+
+/* How often and how many times to poll for a reset while waiting for a
+ * BIST that another function started to complete.
+ */
+#define BIST_WAIT_DELAY_MS	100
+#define BIST_WAIT_DELAY_COUNT	100
+
+/* Default stats update time */
+#define STATS_PERIOD_MS_DEFAULT 1000
+
+static const unsigned int efx_reset_type_max = RESET_TYPE_MAX;
+static const char *const efx_reset_type_names[] = {
+	[RESET_TYPE_INVISIBLE]          = "INVISIBLE",
+	[RESET_TYPE_ALL]                = "ALL",
+	[RESET_TYPE_RECOVER_OR_ALL]     = "RECOVER_OR_ALL",
+	[RESET_TYPE_WORLD]              = "WORLD",
+	[RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
+	[RESET_TYPE_DATAPATH]           = "DATAPATH",
+	[RESET_TYPE_MC_BIST]		= "MC_BIST",
+	[RESET_TYPE_DISABLE]            = "DISABLE",
+	[RESET_TYPE_TX_WATCHDOG]        = "TX_WATCHDOG",
+	[RESET_TYPE_INT_ERROR]          = "INT_ERROR",
+	[RESET_TYPE_DMA_ERROR]          = "DMA_ERROR",
+	[RESET_TYPE_TX_SKIP]            = "TX_SKIP",
+	[RESET_TYPE_MC_FAILURE]         = "MC_FAILURE",
+	[RESET_TYPE_MCDI_TIMEOUT]	= "MCDI_TIMEOUT (FLR)",
+};
+
+#define RESET_TYPE(type) \
+	STRING_TABLE_LOOKUP(type, efx_reset_type)
+
+/* Loopback mode names (see LOOPBACK_MODE()) */
+const unsigned int efx_siena_loopback_mode_max = LOOPBACK_MAX;
+const char *const efx_siena_loopback_mode_names[] = {
+	[LOOPBACK_NONE]		= "NONE",
+	[LOOPBACK_DATA]		= "DATAPATH",
+	[LOOPBACK_GMAC]		= "GMAC",
+	[LOOPBACK_XGMII]	= "XGMII",
+	[LOOPBACK_XGXS]		= "XGXS",
+	[LOOPBACK_XAUI]		= "XAUI",
+	[LOOPBACK_GMII]		= "GMII",
+	[LOOPBACK_SGMII]	= "SGMII",
+	[LOOPBACK_XGBR]		= "XGBR",
+	[LOOPBACK_XFI]		= "XFI",
+	[LOOPBACK_XAUI_FAR]	= "XAUI_FAR",
+	[LOOPBACK_GMII_FAR]	= "GMII_FAR",
+	[LOOPBACK_SGMII_FAR]	= "SGMII_FAR",
+	[LOOPBACK_XFI_FAR]	= "XFI_FAR",
+	[LOOPBACK_GPHY]		= "GPHY",
+	[LOOPBACK_PHYXS]	= "PHYXS",
+	[LOOPBACK_PCS]		= "PCS",
+	[LOOPBACK_PMAPMD]	= "PMA/PMD",
+	[LOOPBACK_XPORT]	= "XPORT",
+	[LOOPBACK_XGMII_WS]	= "XGMII_WS",
+	[LOOPBACK_XAUI_WS]	= "XAUI_WS",
+	[LOOPBACK_XAUI_WS_FAR]  = "XAUI_WS_FAR",
+	[LOOPBACK_XAUI_WS_NEAR] = "XAUI_WS_NEAR",
+	[LOOPBACK_GMII_WS]	= "GMII_WS",
+	[LOOPBACK_XFI_WS]	= "XFI_WS",
+	[LOOPBACK_XFI_WS_FAR]	= "XFI_WS_FAR",
+	[LOOPBACK_PHYXS_WS]	= "PHYXS_WS",
+};
+
+/* Reset workqueue. If any NIC has a hardware failure then a reset will be
+ * queued onto this work queue. This is not a per-nic work queue, because
+ * efx_reset_work() acquires the rtnl lock, so resets are naturally serialised.
+ */
+static struct workqueue_struct *reset_workqueue;
+
+int efx_siena_create_reset_workqueue(void)
+{
+	reset_workqueue = create_singlethread_workqueue("sfc_siena_reset");
+	if (!reset_workqueue) {
+		printk(KERN_ERR "Failed to create reset workqueue\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void efx_siena_queue_reset_work(struct efx_nic *efx)
+{
+	queue_work(reset_workqueue, &efx->reset_work);
+}
+
+void efx_siena_flush_reset_workqueue(struct efx_nic *efx)
+{
+	cancel_work_sync(&efx->reset_work);
+}
+
+void efx_siena_destroy_reset_workqueue(void)
+{
+	if (reset_workqueue) {
+		destroy_workqueue(reset_workqueue);
+		reset_workqueue = NULL;
+	}
+}
+
+/* We assume that efx->type->reconfigure_mac will always try to sync RX
+ * filters and therefore needs to read-lock the filter table against freeing
+ */
+void efx_siena_mac_reconfigure(struct efx_nic *efx, bool mtu_only)
+{
+	if (efx->type->reconfigure_mac) {
+		down_read(&efx->filter_sem);
+		efx->type->reconfigure_mac(efx, mtu_only);
+		up_read(&efx->filter_sem);
+	}
+}
+
+/* Asynchronous work item for changing MAC promiscuity and multicast
+ * hash.  Avoid a drain/rx_ingress enable by reconfiguring the current
+ * MAC directly.
+ */
+static void efx_mac_work(struct work_struct *data)
+{
+	struct efx_nic *efx = container_of(data, struct efx_nic, mac_work);
+
+	mutex_lock(&efx->mac_lock);
+	if (efx->port_enabled)
+		efx_siena_mac_reconfigure(efx, false);
+	mutex_unlock(&efx->mac_lock);
+}
+
+int efx_siena_set_mac_address(struct net_device *net_dev, void *data)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	struct sockaddr *addr = data;
+	u8 *new_addr = addr->sa_data;
+	u8 old_addr[6];
+	int rc;
+
+	if (!is_valid_ether_addr(new_addr)) {
+		netif_err(efx, drv, efx->net_dev,
+			  "invalid ethernet MAC address requested: %pM\n",
+			  new_addr);
+		return -EADDRNOTAVAIL;
+	}
+
+	/* save old address */
+	ether_addr_copy(old_addr, net_dev->dev_addr);
+	eth_hw_addr_set(net_dev, new_addr);
+	if (efx->type->set_mac_address) {
+		rc = efx->type->set_mac_address(efx);
+		if (rc) {
+			eth_hw_addr_set(net_dev, old_addr);
+			return rc;
+		}
+	}
+
+	/* Reconfigure the MAC */
+	mutex_lock(&efx->mac_lock);
+	efx_siena_mac_reconfigure(efx, false);
+	mutex_unlock(&efx->mac_lock);
+
+	return 0;
+}
+
+/* Context: netif_addr_lock held, BHs disabled. */
+void efx_siena_set_rx_mode(struct net_device *net_dev)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+
+	if (efx->port_enabled)
+		queue_work(efx->workqueue, &efx->mac_work);
+	/* Otherwise efx_start_port() will do this */
+}
+
+int efx_siena_set_features(struct net_device *net_dev, netdev_features_t data)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	int rc;
+
+	/* If disabling RX n-tuple filtering, clear existing filters */
+	if (net_dev->features & ~data & NETIF_F_NTUPLE) {
+		rc = efx->type->filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
+		if (rc)
+			return rc;
+	}
+
+	/* If Rx VLAN filter is changed, update filters via mac_reconfigure.
+	 * If rx-fcs is changed, mac_reconfigure updates that too.
+	 */
+	if ((net_dev->features ^ data) & (NETIF_F_HW_VLAN_CTAG_FILTER |
+					  NETIF_F_RXFCS)) {
+		/* efx_siena_set_rx_mode() will schedule MAC work to update filters
+		 * when a new features are finally set in net_dev.
+		 */
+		efx_siena_set_rx_mode(net_dev);
+	}
+
+	return 0;
+}
+
+/* This ensures that the kernel is kept informed (via
+ * netif_carrier_on/off) of the link status, and also maintains the
+ * link status's stop on the port's TX queue.
+ */
+void efx_siena_link_status_changed(struct efx_nic *efx)
+{
+	struct efx_link_state *link_state = &efx->link_state;
+
+	/* SFC Bug 5356: A net_dev notifier is registered, so we must ensure
+	 * that no events are triggered between unregister_netdev() and the
+	 * driver unloading. A more general condition is that NETDEV_CHANGE
+	 * can only be generated between NETDEV_UP and NETDEV_DOWN
+	 */
+	if (!netif_running(efx->net_dev))
+		return;
+
+	if (link_state->up != netif_carrier_ok(efx->net_dev)) {
+		efx->n_link_state_changes++;
+
+		if (link_state->up)
+			netif_carrier_on(efx->net_dev);
+		else
+			netif_carrier_off(efx->net_dev);
+	}
+
+	/* Status message for kernel log */
+	if (link_state->up)
+		netif_info(efx, link, efx->net_dev,
+			   "link up at %uMbps %s-duplex (MTU %d)\n",
+			   link_state->speed, link_state->fd ? "full" : "half",
+			   efx->net_dev->mtu);
+	else
+		netif_info(efx, link, efx->net_dev, "link down\n");
+}
+
+unsigned int efx_siena_xdp_max_mtu(struct efx_nic *efx)
+{
+	/* The maximum MTU that we can fit in a single page, allowing for
+	 * framing, overhead and XDP headroom + tailroom.
+	 */
+	int overhead = EFX_MAX_FRAME_LEN(0) + sizeof(struct efx_rx_page_state) +
+		       efx->rx_prefix_size + efx->type->rx_buffer_padding +
+		       efx->rx_ip_align + EFX_XDP_HEADROOM + EFX_XDP_TAILROOM;
+
+	return PAGE_SIZE - overhead;
+}
+
+/* Context: process, rtnl_lock() held. */
+int efx_siena_change_mtu(struct net_device *net_dev, int new_mtu)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	int rc;
+
+	rc = efx_check_disabled(efx);
+	if (rc)
+		return rc;
+
+	if (rtnl_dereference(efx->xdp_prog) &&
+	    new_mtu > efx_siena_xdp_max_mtu(efx)) {
+		netif_err(efx, drv, efx->net_dev,
+			  "Requested MTU of %d too big for XDP (max: %d)\n",
+			  new_mtu, efx_siena_xdp_max_mtu(efx));
+		return -EINVAL;
+	}
+
+	netif_dbg(efx, drv, efx->net_dev, "changing MTU to %d\n", new_mtu);
+
+	efx_device_detach_sync(efx);
+	efx_siena_stop_all(efx);
+
+	mutex_lock(&efx->mac_lock);
+	net_dev->mtu = new_mtu;
+	efx_siena_mac_reconfigure(efx, true);
+	mutex_unlock(&efx->mac_lock);
+
+	efx_siena_start_all(efx);
+	efx_device_attach_if_not_resetting(efx);
+	return 0;
+}
+
+/**************************************************************************
+ *
+ * Hardware monitor
+ *
+ **************************************************************************/
+
+/* Run periodically off the general workqueue */
+static void efx_monitor(struct work_struct *data)
+{
+	struct efx_nic *efx = container_of(data, struct efx_nic,
+					   monitor_work.work);
+
+	netif_vdbg(efx, timer, efx->net_dev,
+		   "hardware monitor executing on CPU %d\n",
+		   raw_smp_processor_id());
+	BUG_ON(efx->type->monitor == NULL);
+
+	/* If the mac_lock is already held then it is likely a port
+	 * reconfiguration is already in place, which will likely do
+	 * most of the work of monitor() anyway.
+	 */
+	if (mutex_trylock(&efx->mac_lock)) {
+		if (efx->port_enabled && efx->type->monitor)
+			efx->type->monitor(efx);
+		mutex_unlock(&efx->mac_lock);
+	}
+
+	efx_siena_start_monitor(efx);
+}
+
+void efx_siena_start_monitor(struct efx_nic *efx)
+{
+	if (efx->type->monitor)
+		queue_delayed_work(efx->workqueue, &efx->monitor_work,
+				   efx_monitor_interval);
+}
+
+/**************************************************************************
+ *
+ * Event queue processing
+ *
+ *************************************************************************/
+
+/* Channels are shutdown and reinitialised whilst the NIC is running
+ * to propagate configuration changes (mtu, checksum offload), or
+ * to clear hardware error conditions
+ */
+static void efx_start_datapath(struct efx_nic *efx)
+{
+	netdev_features_t old_features = efx->net_dev->features;
+	bool old_rx_scatter = efx->rx_scatter;
+	size_t rx_buf_len;
+
+	/* Calculate the rx buffer allocation parameters required to
+	 * support the current MTU, including padding for header
+	 * alignment and overruns.
+	 */
+	efx->rx_dma_len = (efx->rx_prefix_size +
+			   EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+			   efx->type->rx_buffer_padding);
+	rx_buf_len = (sizeof(struct efx_rx_page_state)   + EFX_XDP_HEADROOM +
+		      efx->rx_ip_align + efx->rx_dma_len + EFX_XDP_TAILROOM);
+
+	if (rx_buf_len <= PAGE_SIZE) {
+		efx->rx_scatter = efx->type->always_rx_scatter;
+		efx->rx_buffer_order = 0;
+	} else if (efx->type->can_rx_scatter) {
+		BUILD_BUG_ON(EFX_RX_USR_BUF_SIZE % L1_CACHE_BYTES);
+		BUILD_BUG_ON(sizeof(struct efx_rx_page_state) +
+			     2 * ALIGN(NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE,
+				       EFX_RX_BUF_ALIGNMENT) >
+			     PAGE_SIZE);
+		efx->rx_scatter = true;
+		efx->rx_dma_len = EFX_RX_USR_BUF_SIZE;
+		efx->rx_buffer_order = 0;
+	} else {
+		efx->rx_scatter = false;
+		efx->rx_buffer_order = get_order(rx_buf_len);
+	}
+
+	efx_siena_rx_config_page_split(efx);
+	if (efx->rx_buffer_order)
+		netif_dbg(efx, drv, efx->net_dev,
+			  "RX buf len=%u; page order=%u batch=%u\n",
+			  efx->rx_dma_len, efx->rx_buffer_order,
+			  efx->rx_pages_per_batch);
+	else
+		netif_dbg(efx, drv, efx->net_dev,
+			  "RX buf len=%u step=%u bpp=%u; page batch=%u\n",
+			  efx->rx_dma_len, efx->rx_page_buf_step,
+			  efx->rx_bufs_per_page, efx->rx_pages_per_batch);
+
+	/* Restore previously fixed features in hw_features and remove
+	 * features which are fixed now
+	 */
+	efx->net_dev->hw_features |= efx->net_dev->features;
+	efx->net_dev->hw_features &= ~efx->fixed_features;
+	efx->net_dev->features |= efx->fixed_features;
+	if (efx->net_dev->features != old_features)
+		netdev_features_change(efx->net_dev);
+
+	/* RX filters may also have scatter-enabled flags */
+	if ((efx->rx_scatter != old_rx_scatter) &&
+	    efx->type->filter_update_rx_scatter)
+		efx->type->filter_update_rx_scatter(efx);
+
+	/* We must keep at least one descriptor in a TX ring empty.
+	 * We could avoid this when the queue size does not exactly
+	 * match the hardware ring size, but it's not that important.
+	 * Therefore we stop the queue when one more skb might fill
+	 * the ring completely.  We wake it when half way back to
+	 * empty.
+	 */
+	efx->txq_stop_thresh = efx->txq_entries - efx_siena_tx_max_skb_descs(efx);
+	efx->txq_wake_thresh = efx->txq_stop_thresh / 2;
+
+	/* Initialise the channels */
+	efx_siena_start_channels(efx);
+
+	efx_siena_ptp_start_datapath(efx);
+
+	if (netif_device_present(efx->net_dev))
+		netif_tx_wake_all_queues(efx->net_dev);
+}
+
+static void efx_stop_datapath(struct efx_nic *efx)
+{
+	EFX_ASSERT_RESET_SERIALISED(efx);
+	BUG_ON(efx->port_enabled);
+
+	efx_siena_ptp_stop_datapath(efx);
+
+	efx_siena_stop_channels(efx);
+}
+
+/**************************************************************************
+ *
+ * Port handling
+ *
+ **************************************************************************/
+
+/* Equivalent to efx_siena_link_set_advertising with all-zeroes, except does not
+ * force the Autoneg bit on.
+ */
+void efx_siena_link_clear_advertising(struct efx_nic *efx)
+{
+	bitmap_zero(efx->link_advertising, __ETHTOOL_LINK_MODE_MASK_NBITS);
+	efx->wanted_fc &= ~(EFX_FC_TX | EFX_FC_RX);
+}
+
+void efx_siena_link_set_wanted_fc(struct efx_nic *efx, u8 wanted_fc)
+{
+	efx->wanted_fc = wanted_fc;
+	if (efx->link_advertising[0]) {
+		if (wanted_fc & EFX_FC_RX)
+			efx->link_advertising[0] |= (ADVERTISED_Pause |
+						     ADVERTISED_Asym_Pause);
+		else
+			efx->link_advertising[0] &= ~(ADVERTISED_Pause |
+						      ADVERTISED_Asym_Pause);
+		if (wanted_fc & EFX_FC_TX)
+			efx->link_advertising[0] ^= ADVERTISED_Asym_Pause;
+	}
+}
+
+static void efx_start_port(struct efx_nic *efx)
+{
+	netif_dbg(efx, ifup, efx->net_dev, "start port\n");
+	BUG_ON(efx->port_enabled);
+
+	mutex_lock(&efx->mac_lock);
+	efx->port_enabled = true;
+
+	/* Ensure MAC ingress/egress is enabled */
+	efx_siena_mac_reconfigure(efx, false);
+
+	mutex_unlock(&efx->mac_lock);
+}
+
+/* Cancel work for MAC reconfiguration, periodic hardware monitoring
+ * and the async self-test, wait for them to finish and prevent them
+ * being scheduled again.  This doesn't cover online resets, which
+ * should only be cancelled when removing the device.
+ */
+static void efx_stop_port(struct efx_nic *efx)
+{
+	netif_dbg(efx, ifdown, efx->net_dev, "stop port\n");
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	mutex_lock(&efx->mac_lock);
+	efx->port_enabled = false;
+	mutex_unlock(&efx->mac_lock);
+
+	/* Serialise against efx_set_multicast_list() */
+	netif_addr_lock_bh(efx->net_dev);
+	netif_addr_unlock_bh(efx->net_dev);
+
+	cancel_delayed_work_sync(&efx->monitor_work);
+	efx_siena_selftest_async_cancel(efx);
+	cancel_work_sync(&efx->mac_work);
+}
+
+/* If the interface is supposed to be running but is not, start
+ * the hardware and software data path, regular activity for the port
+ * (MAC statistics, link polling, etc.) and schedule the port to be
+ * reconfigured.  Interrupts must already be enabled.  This function
+ * is safe to call multiple times, so long as the NIC is not disabled.
+ * Requires the RTNL lock.
+ */
+void efx_siena_start_all(struct efx_nic *efx)
+{
+	EFX_ASSERT_RESET_SERIALISED(efx);
+	BUG_ON(efx->state == STATE_DISABLED);
+
+	/* Check that it is appropriate to restart the interface. All
+	 * of these flags are safe to read under just the rtnl lock
+	 */
+	if (efx->port_enabled || !netif_running(efx->net_dev) ||
+	    efx->reset_pending)
+		return;
+
+	efx_start_port(efx);
+	efx_start_datapath(efx);
+
+	/* Start the hardware monitor if there is one */
+	efx_siena_start_monitor(efx);
+
+	/* Link state detection is normally event-driven; we have
+	 * to poll now because we could have missed a change
+	 */
+	mutex_lock(&efx->mac_lock);
+	if (efx_siena_mcdi_phy_poll(efx))
+		efx_siena_link_status_changed(efx);
+	mutex_unlock(&efx->mac_lock);
+
+	if (efx->type->start_stats) {
+		efx->type->start_stats(efx);
+		efx->type->pull_stats(efx);
+		spin_lock_bh(&efx->stats_lock);
+		efx->type->update_stats(efx, NULL, NULL);
+		spin_unlock_bh(&efx->stats_lock);
+	}
+}
+
+/* Quiesce the hardware and software data path, and regular activity
+ * for the port without bringing the link down.  Safe to call multiple
+ * times with the NIC in almost any state, but interrupts should be
+ * enabled.  Requires the RTNL lock.
+ */
+void efx_siena_stop_all(struct efx_nic *efx)
+{
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	/* port_enabled can be read safely under the rtnl lock */
+	if (!efx->port_enabled)
+		return;
+
+	if (efx->type->update_stats) {
+		/* update stats before we go down so we can accurately count
+		 * rx_nodesc_drops
+		 */
+		efx->type->pull_stats(efx);
+		spin_lock_bh(&efx->stats_lock);
+		efx->type->update_stats(efx, NULL, NULL);
+		spin_unlock_bh(&efx->stats_lock);
+		efx->type->stop_stats(efx);
+	}
+
+	efx_stop_port(efx);
+
+	/* Stop the kernel transmit interface.  This is only valid if
+	 * the device is stopped or detached; otherwise the watchdog
+	 * may fire immediately.
+	 */
+	WARN_ON(netif_running(efx->net_dev) &&
+		netif_device_present(efx->net_dev));
+	netif_tx_disable(efx->net_dev);
+
+	efx_stop_datapath(efx);
+}
+
+static size_t efx_siena_update_stats_atomic(struct efx_nic *efx, u64 *full_stats,
+					    struct rtnl_link_stats64 *core_stats)
+{
+	if (efx->type->update_stats_atomic)
+		return efx->type->update_stats_atomic(efx, full_stats, core_stats);
+	return efx->type->update_stats(efx, full_stats, core_stats);
+}
+
+/* Context: process, dev_base_lock or RTNL held, non-blocking. */
+void efx_siena_net_stats(struct net_device *net_dev,
+			 struct rtnl_link_stats64 *stats)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+
+	spin_lock_bh(&efx->stats_lock);
+	efx_siena_update_stats_atomic(efx, NULL, stats);
+	spin_unlock_bh(&efx->stats_lock);
+}
+
+/* Push loopback/power/transmit disable settings to the PHY, and reconfigure
+ * the MAC appropriately. All other PHY configuration changes are pushed
+ * through phy_op->set_settings(), and pushed asynchronously to the MAC
+ * through efx_monitor().
+ *
+ * Callers must hold the mac_lock
+ */
+int __efx_siena_reconfigure_port(struct efx_nic *efx)
+{
+	enum efx_phy_mode phy_mode;
+	int rc = 0;
+
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+
+	/* Disable PHY transmit in mac level loopbacks */
+	phy_mode = efx->phy_mode;
+	if (LOOPBACK_INTERNAL(efx))
+		efx->phy_mode |= PHY_MODE_TX_DISABLED;
+	else
+		efx->phy_mode &= ~PHY_MODE_TX_DISABLED;
+
+	if (efx->type->reconfigure_port)
+		rc = efx->type->reconfigure_port(efx);
+
+	if (rc)
+		efx->phy_mode = phy_mode;
+
+	return rc;
+}
+
+/* Reinitialise the MAC to pick up new PHY settings, even if the port is
+ * disabled.
+ */
+int efx_siena_reconfigure_port(struct efx_nic *efx)
+{
+	int rc;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	mutex_lock(&efx->mac_lock);
+	rc = __efx_siena_reconfigure_port(efx);
+	mutex_unlock(&efx->mac_lock);
+
+	return rc;
+}
+
+/**************************************************************************
+ *
+ * Device reset and suspend
+ *
+ **************************************************************************/
+
+static void efx_wait_for_bist_end(struct efx_nic *efx)
+{
+	int i;
+
+	for (i = 0; i < BIST_WAIT_DELAY_COUNT; ++i) {
+		if (efx_siena_mcdi_poll_reboot(efx))
+			goto out;
+		msleep(BIST_WAIT_DELAY_MS);
+	}
+
+	netif_err(efx, drv, efx->net_dev, "Warning: No MC reboot after BIST mode\n");
+out:
+	/* Either way unset the BIST flag. If we found no reboot we probably
+	 * won't recover, but we should try.
+	 */
+	efx->mc_bist_for_other_fn = false;
+}
+
+/* Try recovery mechanisms.
+ * For now only EEH is supported.
+ * Returns 0 if the recovery mechanisms are unsuccessful.
+ * Returns a non-zero value otherwise.
+ */
+int efx_siena_try_recovery(struct efx_nic *efx)
+{
+#ifdef CONFIG_EEH
+	/* A PCI error can occur and not be seen by EEH because nothing
+	 * happens on the PCI bus. In this case the driver may fail and
+	 * schedule a 'recover or reset', leading to this recovery handler.
+	 * Manually call the eeh failure check function.
+	 */
+	struct eeh_dev *eehdev = pci_dev_to_eeh_dev(efx->pci_dev);
+	if (eeh_dev_check_failure(eehdev)) {
+		/* The EEH mechanisms will handle the error and reset the
+		 * device if necessary.
+		 */
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+/* Tears down the entire software state and most of the hardware state
+ * before reset.
+ */
+void efx_siena_reset_down(struct efx_nic *efx, enum reset_type method)
+{
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	if (method == RESET_TYPE_MCDI_TIMEOUT)
+		efx->type->prepare_flr(efx);
+
+	efx_siena_stop_all(efx);
+	efx_siena_disable_interrupts(efx);
+
+	mutex_lock(&efx->mac_lock);
+	down_write(&efx->filter_sem);
+	mutex_lock(&efx->rss_lock);
+	efx->type->fini(efx);
+}
+
+/* Context: netif_tx_lock held, BHs disabled. */
+void efx_siena_watchdog(struct net_device *net_dev, unsigned int txqueue)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+
+	netif_err(efx, tx_err, efx->net_dev,
+		  "TX stuck with port_enabled=%d: resetting channels\n",
+		  efx->port_enabled);
+
+	efx_siena_schedule_reset(efx, RESET_TYPE_TX_WATCHDOG);
+}
+
+/* This function will always ensure that the locks acquired in
+ * efx_siena_reset_down() are released. A failure return code indicates
+ * that we were unable to reinitialise the hardware, and the
+ * driver should be disabled. If ok is false, then the rx and tx
+ * engines are not restarted, pending a RESET_DISABLE.
+ */
+int efx_siena_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
+{
+	int rc;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	if (method == RESET_TYPE_MCDI_TIMEOUT)
+		efx->type->finish_flr(efx);
+
+	/* Ensure that SRAM is initialised even if we're disabling the device */
+	rc = efx->type->init(efx);
+	if (rc) {
+		netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n");
+		goto fail;
+	}
+
+	if (!ok)
+		goto fail;
+
+	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE &&
+	    method != RESET_TYPE_DATAPATH) {
+		rc = efx_siena_mcdi_port_reconfigure(efx);
+		if (rc && rc != -EPERM)
+			netif_err(efx, drv, efx->net_dev,
+				  "could not restore PHY settings\n");
+	}
+
+	rc = efx_siena_enable_interrupts(efx);
+	if (rc)
+		goto fail;
+
+#ifdef CONFIG_SFC_SIENA_SRIOV
+	rc = efx->type->vswitching_restore(efx);
+	if (rc) /* not fatal; the PF will still work fine */
+		netif_warn(efx, probe, efx->net_dev,
+			   "failed to restore vswitching rc=%d;"
+			   " VFs may not function\n", rc);
+#endif
+
+	if (efx->type->rx_restore_rss_contexts)
+		efx->type->rx_restore_rss_contexts(efx);
+	mutex_unlock(&efx->rss_lock);
+	efx->type->filter_table_restore(efx);
+	up_write(&efx->filter_sem);
+	if (efx->type->sriov_reset)
+		efx->type->sriov_reset(efx);
+
+	mutex_unlock(&efx->mac_lock);
+
+	efx_siena_start_all(efx);
+
+	if (efx->type->udp_tnl_push_ports)
+		efx->type->udp_tnl_push_ports(efx);
+
+	return 0;
+
+fail:
+	efx->port_initialized = false;
+
+	mutex_unlock(&efx->rss_lock);
+	up_write(&efx->filter_sem);
+	mutex_unlock(&efx->mac_lock);
+
+	return rc;
+}
+
+/* Reset the NIC using the specified method.  Note that the reset may
+ * fail, in which case the card will be left in an unusable state.
+ *
+ * Caller must hold the rtnl_lock.
+ */
+int efx_siena_reset(struct efx_nic *efx, enum reset_type method)
+{
+	int rc, rc2 = 0;
+	bool disabled;
+
+	netif_info(efx, drv, efx->net_dev, "resetting (%s)\n",
+		   RESET_TYPE(method));
+
+	efx_device_detach_sync(efx);
+	/* efx_siena_reset_down() grabs locks that prevent recovery on EF100.
+	 * EF100 reset is handled in the efx_nic_type callback below.
+	 */
+	if (efx_nic_rev(efx) != EFX_REV_EF100)
+		efx_siena_reset_down(efx, method);
+
+	rc = efx->type->reset(efx, method);
+	if (rc) {
+		netif_err(efx, drv, efx->net_dev, "failed to reset hardware\n");
+		goto out;
+	}
+
+	/* Clear flags for the scopes we covered.  We assume the NIC and
+	 * driver are now quiescent so that there is no race here.
+	 */
+	if (method < RESET_TYPE_MAX_METHOD)
+		efx->reset_pending &= -(1 << (method + 1));
+	else /* it doesn't fit into the well-ordered scope hierarchy */
+		__clear_bit(method, &efx->reset_pending);
+
+	/* Reinitialise bus-mastering, which may have been turned off before
+	 * the reset was scheduled. This is still appropriate, even in the
+	 * RESET_TYPE_DISABLE since this driver generally assumes the hardware
+	 * can respond to requests.
+	 */
+	pci_set_master(efx->pci_dev);
+
+out:
+	/* Leave device stopped if necessary */
+	disabled = rc ||
+		method == RESET_TYPE_DISABLE ||
+		method == RESET_TYPE_RECOVER_OR_DISABLE;
+	if (efx_nic_rev(efx) != EFX_REV_EF100)
+		rc2 = efx_siena_reset_up(efx, method, !disabled);
+	if (rc2) {
+		disabled = true;
+		if (!rc)
+			rc = rc2;
+	}
+
+	if (disabled) {
+		dev_close(efx->net_dev);
+		netif_err(efx, drv, efx->net_dev, "has been disabled\n");
+		efx->state = STATE_DISABLED;
+	} else {
+		netif_dbg(efx, drv, efx->net_dev, "reset complete\n");
+		efx_device_attach_if_not_resetting(efx);
+	}
+	return rc;
+}
+
+/* The worker thread exists so that code that cannot sleep can
+ * schedule a reset for later.
+ */
+static void efx_reset_work(struct work_struct *data)
+{
+	struct efx_nic *efx = container_of(data, struct efx_nic, reset_work);
+	unsigned long pending;
+	enum reset_type method;
+
+	pending = READ_ONCE(efx->reset_pending);
+	method = fls(pending) - 1;
+
+	if (method == RESET_TYPE_MC_BIST)
+		efx_wait_for_bist_end(efx);
+
+	if ((method == RESET_TYPE_RECOVER_OR_DISABLE ||
+	     method == RESET_TYPE_RECOVER_OR_ALL) &&
+	    efx_siena_try_recovery(efx))
+		return;
+
+	if (!pending)
+		return;
+
+	rtnl_lock();
+
+	/* We checked the state in efx_siena_schedule_reset() but it may
+	 * have changed by now.  Now that we have the RTNL lock,
+	 * it cannot change again.
+	 */
+	if (efx->state == STATE_READY)
+		(void)efx_siena_reset(efx, method);
+
+	rtnl_unlock();
+}
+
+void efx_siena_schedule_reset(struct efx_nic *efx, enum reset_type type)
+{
+	enum reset_type method;
+
+	if (efx->state == STATE_RECOVERY) {
+		netif_dbg(efx, drv, efx->net_dev,
+			  "recovering: skip scheduling %s reset\n",
+			  RESET_TYPE(type));
+		return;
+	}
+
+	switch (type) {
+	case RESET_TYPE_INVISIBLE:
+	case RESET_TYPE_ALL:
+	case RESET_TYPE_RECOVER_OR_ALL:
+	case RESET_TYPE_WORLD:
+	case RESET_TYPE_DISABLE:
+	case RESET_TYPE_RECOVER_OR_DISABLE:
+	case RESET_TYPE_DATAPATH:
+	case RESET_TYPE_MC_BIST:
+	case RESET_TYPE_MCDI_TIMEOUT:
+		method = type;
+		netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
+			  RESET_TYPE(method));
+		break;
+	default:
+		method = efx->type->map_reset_reason(type);
+		netif_dbg(efx, drv, efx->net_dev,
+			  "scheduling %s reset for %s\n",
+			  RESET_TYPE(method), RESET_TYPE(type));
+		break;
+	}
+
+	set_bit(method, &efx->reset_pending);
+	smp_mb(); /* ensure we change reset_pending before checking state */
+
+	/* If we're not READY then just leave the flags set as the cue
+	 * to abort probing or reschedule the reset later.
+	 */
+	if (READ_ONCE(efx->state) != STATE_READY)
+		return;
+
+	/* efx_process_channel() will no longer read events once a
+	 * reset is scheduled. So switch back to poll'd MCDI completions.
+	 */
+	efx_siena_mcdi_mode_poll(efx);
+
+	efx_siena_queue_reset_work(efx);
+}
+
+/**************************************************************************
+ *
+ * Dummy NIC operations
+ *
+ * Can be used for some unimplemented operations
+ * Needed so all function pointers are valid and do not have to be tested
+ * before use
+ *
+ **************************************************************************/
+int efx_siena_port_dummy_op_int(struct efx_nic *efx)
+{
+	return 0;
+}
+
+void efx_siena_port_dummy_op_void(struct efx_nic *efx) {}
+
+/**************************************************************************
+ *
+ * Data housekeeping
+ *
+ **************************************************************************/
+
+/* This zeroes out and then fills in the invariants in a struct
+ * efx_nic (including all sub-structures).
+ */
+int efx_siena_init_struct(struct efx_nic *efx,
+			  struct pci_dev *pci_dev, struct net_device *net_dev)
+{
+	int rc = -ENOMEM;
+
+	/* Initialise common structures */
+	INIT_LIST_HEAD(&efx->node);
+	INIT_LIST_HEAD(&efx->secondary_list);
+	spin_lock_init(&efx->biu_lock);
+#ifdef CONFIG_SFC_SIENA_MTD
+	INIT_LIST_HEAD(&efx->mtd_list);
+#endif
+	INIT_WORK(&efx->reset_work, efx_reset_work);
+	INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor);
+	efx_siena_selftest_async_init(efx);
+	efx->pci_dev = pci_dev;
+	efx->msg_enable = debug;
+	efx->state = STATE_UNINIT;
+	strscpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
+
+	efx->net_dev = net_dev;
+	efx->rx_prefix_size = efx->type->rx_prefix_size;
+	efx->rx_ip_align =
+		NET_IP_ALIGN ? (efx->rx_prefix_size + NET_IP_ALIGN) % 4 : 0;
+	efx->rx_packet_hash_offset =
+		efx->type->rx_hash_offset - efx->type->rx_prefix_size;
+	efx->rx_packet_ts_offset =
+		efx->type->rx_ts_offset - efx->type->rx_prefix_size;
+	INIT_LIST_HEAD(&efx->rss_context.list);
+	efx->rss_context.context_id = EFX_MCDI_RSS_CONTEXT_INVALID;
+	mutex_init(&efx->rss_lock);
+	efx->vport_id = EVB_PORT_ID_ASSIGNED;
+	spin_lock_init(&efx->stats_lock);
+	efx->vi_stride = EFX_DEFAULT_VI_STRIDE;
+	efx->num_mac_stats = MC_CMD_MAC_NSTATS;
+	BUILD_BUG_ON(MC_CMD_MAC_NSTATS - 1 != MC_CMD_MAC_GENERATION_END);
+	mutex_init(&efx->mac_lock);
+	init_rwsem(&efx->filter_sem);
+#ifdef CONFIG_RFS_ACCEL
+	mutex_init(&efx->rps_mutex);
+	spin_lock_init(&efx->rps_hash_lock);
+	/* Failure to allocate is not fatal, but may degrade ARFS performance */
+	efx->rps_hash_table = kcalloc(EFX_ARFS_HASH_TABLE_SIZE,
+				      sizeof(*efx->rps_hash_table), GFP_KERNEL);
+#endif
+	efx->mdio.dev = net_dev;
+	INIT_WORK(&efx->mac_work, efx_mac_work);
+	init_waitqueue_head(&efx->flush_wq);
+
+	efx->tx_queues_per_channel = 1;
+	efx->rxq_entries = EFX_DEFAULT_DMAQ_SIZE;
+	efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE;
+
+	efx->mem_bar = UINT_MAX;
+
+	rc = efx_siena_init_channels(efx);
+	if (rc)
+		goto fail;
+
+	/* Would be good to use the net_dev name, but we're too early */
+	snprintf(efx->workqueue_name, sizeof(efx->workqueue_name), "sfc%s",
+		 pci_name(pci_dev));
+	efx->workqueue = create_singlethread_workqueue(efx->workqueue_name);
+	if (!efx->workqueue) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	efx_siena_fini_struct(efx);
+	return rc;
+}
+
+void efx_siena_fini_struct(struct efx_nic *efx)
+{
+#ifdef CONFIG_RFS_ACCEL
+	kfree(efx->rps_hash_table);
+#endif
+
+	efx_siena_fini_channels(efx);
+
+	kfree(efx->vpd_sn);
+
+	if (efx->workqueue) {
+		destroy_workqueue(efx->workqueue);
+		efx->workqueue = NULL;
+	}
+}
+
+/* This configures the PCI device to enable I/O and DMA. */
+int efx_siena_init_io(struct efx_nic *efx, int bar, dma_addr_t dma_mask,
+		      unsigned int mem_map_size)
+{
+	struct pci_dev *pci_dev = efx->pci_dev;
+	int rc;
+
+	efx->mem_bar = UINT_MAX;
+
+	netif_dbg(efx, probe, efx->net_dev, "initialising I/O bar=%d\n", bar);
+
+	rc = pci_enable_device(pci_dev);
+	if (rc) {
+		netif_err(efx, probe, efx->net_dev,
+			  "failed to enable PCI device\n");
+		goto fail1;
+	}
+
+	pci_set_master(pci_dev);
+
+	rc = dma_set_mask_and_coherent(&pci_dev->dev, dma_mask);
+	if (rc) {
+		netif_err(efx, probe, efx->net_dev,
+			  "could not find a suitable DMA mask\n");
+		goto fail2;
+	}
+	netif_dbg(efx, probe, efx->net_dev,
+		  "using DMA mask %llx\n", (unsigned long long)dma_mask);
+
+	efx->membase_phys = pci_resource_start(efx->pci_dev, bar);
+	if (!efx->membase_phys) {
+		netif_err(efx, probe, efx->net_dev,
+			  "ERROR: No BAR%d mapping from the BIOS. "
+			  "Try pci=realloc on the kernel command line\n", bar);
+		rc = -ENODEV;
+		goto fail3;
+	}
+
+	rc = pci_request_region(pci_dev, bar, "sfc");
+	if (rc) {
+		netif_err(efx, probe, efx->net_dev,
+			  "request for memory BAR[%d] failed\n", bar);
+		rc = -EIO;
+		goto fail3;
+	}
+	efx->mem_bar = bar;
+	efx->membase = ioremap(efx->membase_phys, mem_map_size);
+	if (!efx->membase) {
+		netif_err(efx, probe, efx->net_dev,
+			  "could not map memory BAR[%d] at %llx+%x\n", bar,
+			  (unsigned long long)efx->membase_phys, mem_map_size);
+		rc = -ENOMEM;
+		goto fail4;
+	}
+	netif_dbg(efx, probe, efx->net_dev,
+		  "memory BAR[%d] at %llx+%x (virtual %p)\n", bar,
+		  (unsigned long long)efx->membase_phys, mem_map_size,
+		  efx->membase);
+
+	return 0;
+
+fail4:
+	pci_release_region(efx->pci_dev, bar);
+fail3:
+	efx->membase_phys = 0;
+fail2:
+	pci_disable_device(efx->pci_dev);
+fail1:
+	return rc;
+}
+
+void efx_siena_fini_io(struct efx_nic *efx)
+{
+	netif_dbg(efx, drv, efx->net_dev, "shutting down I/O\n");
+
+	if (efx->membase) {
+		iounmap(efx->membase);
+		efx->membase = NULL;
+	}
+
+	if (efx->membase_phys) {
+		pci_release_region(efx->pci_dev, efx->mem_bar);
+		efx->membase_phys = 0;
+		efx->mem_bar = UINT_MAX;
+	}
+
+	/* Don't disable bus-mastering if VFs are assigned */
+	if (!pci_vfs_assigned(efx->pci_dev))
+		pci_disable_device(efx->pci_dev);
+}
+
+#ifdef CONFIG_SFC_SIENA_MCDI_LOGGING
+static ssize_t mcdi_logging_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct efx_nic *efx = dev_get_drvdata(dev);
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+
+	return sysfs_emit(buf, "%d\n", mcdi->logging_enabled);
+}
+
+static ssize_t mcdi_logging_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct efx_nic *efx = dev_get_drvdata(dev);
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+	bool enable = count > 0 && *buf != '0';
+
+	mcdi->logging_enabled = enable;
+	return count;
+}
+
+static DEVICE_ATTR_RW(mcdi_logging);
+
+void efx_siena_init_mcdi_logging(struct efx_nic *efx)
+{
+	int rc = device_create_file(&efx->pci_dev->dev, &dev_attr_mcdi_logging);
+
+	if (rc) {
+		netif_warn(efx, drv, efx->net_dev,
+			   "failed to init net dev attributes\n");
+	}
+}
+
+void efx_siena_fini_mcdi_logging(struct efx_nic *efx)
+{
+	device_remove_file(&efx->pci_dev->dev, &dev_attr_mcdi_logging);
+}
+#endif
+
+/* A PCI error affecting this device was detected.
+ * At this point MMIO and DMA may be disabled.
+ * Stop the software path and request a slot reset.
+ */
+static pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev,
+					      pci_channel_state_t state)
+{
+	pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+	struct efx_nic *efx = pci_get_drvdata(pdev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	rtnl_lock();
+
+	if (efx->state != STATE_DISABLED) {
+		efx->state = STATE_RECOVERY;
+		efx->reset_pending = 0;
+
+		efx_device_detach_sync(efx);
+
+		efx_siena_stop_all(efx);
+		efx_siena_disable_interrupts(efx);
+
+		status = PCI_ERS_RESULT_NEED_RESET;
+	} else {
+		/* If the interface is disabled we don't want to do anything
+		 * with it.
+		 */
+		status = PCI_ERS_RESULT_RECOVERED;
+	}
+
+	rtnl_unlock();
+
+	pci_disable_device(pdev);
+
+	return status;
+}
+
+/* Fake a successful reset, which will be performed later in efx_io_resume. */
+static pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev)
+{
+	struct efx_nic *efx = pci_get_drvdata(pdev);
+	pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+
+	if (pci_enable_device(pdev)) {
+		netif_err(efx, hw, efx->net_dev,
+			  "Cannot re-enable PCI device after reset.\n");
+		status =  PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	return status;
+}
+
+/* Perform the actual reset and resume I/O operations. */
+static void efx_io_resume(struct pci_dev *pdev)
+{
+	struct efx_nic *efx = pci_get_drvdata(pdev);
+	int rc;
+
+	rtnl_lock();
+
+	if (efx->state == STATE_DISABLED)
+		goto out;
+
+	rc = efx_siena_reset(efx, RESET_TYPE_ALL);
+	if (rc) {
+		netif_err(efx, hw, efx->net_dev,
+			  "efx_siena_reset failed after PCI error (%d)\n", rc);
+	} else {
+		efx->state = STATE_READY;
+		netif_dbg(efx, hw, efx->net_dev,
+			  "Done resetting and resuming IO after PCI error.\n");
+	}
+
+out:
+	rtnl_unlock();
+}
+
+/* For simplicity and reliability, we always require a slot reset and try to
+ * reset the hardware when a pci error affecting the device is detected.
+ * We leave both the link_reset and mmio_enabled callback unimplemented:
+ * with our request for slot reset the mmio_enabled callback will never be
+ * called, and the link_reset callback is not used by AER or EEH mechanisms.
+ */
+const struct pci_error_handlers efx_siena_err_handlers = {
+	.error_detected = efx_io_error_detected,
+	.slot_reset	= efx_io_slot_reset,
+	.resume		= efx_io_resume,
+};
+
+/* Determine whether the NIC will be able to handle TX offloads for a given
+ * encapsulated packet.
+ */
+static bool efx_can_encap_offloads(struct efx_nic *efx, struct sk_buff *skb)
+{
+	struct gre_base_hdr *greh;
+	__be16 dst_port;
+	u8 ipproto;
+
+	/* Does the NIC support encap offloads?
+	 * If not, we should never get here, because we shouldn't have
+	 * advertised encap offload feature flags in the first place.
+	 */
+	if (WARN_ON_ONCE(!efx->type->udp_tnl_has_port))
+		return false;
+
+	/* Determine encapsulation protocol in use */
+	switch (skb->protocol) {
+	case htons(ETH_P_IP):
+		ipproto = ip_hdr(skb)->protocol;
+		break;
+	case htons(ETH_P_IPV6):
+		/* If there are extension headers, this will cause us to
+		 * think we can't offload something that we maybe could have.
+		 */
+		ipproto = ipv6_hdr(skb)->nexthdr;
+		break;
+	default:
+		/* Not IP, so can't offload it */
+		return false;
+	}
+	switch (ipproto) {
+	case IPPROTO_GRE:
+		/* We support NVGRE but not IP over GRE or random gretaps.
+		 * Specifically, the NIC will accept GRE as encapsulated if
+		 * the inner protocol is Ethernet, but only handle it
+		 * correctly if the GRE header is 8 bytes long.  Moreover,
+		 * it will not update the Checksum or Sequence Number fields
+		 * if they are present.  (The Routing Present flag,
+		 * GRE_ROUTING, cannot be set else the header would be more
+		 * than 8 bytes long; so we don't have to worry about it.)
+		 */
+		if (skb->inner_protocol_type != ENCAP_TYPE_ETHER)
+			return false;
+		if (ntohs(skb->inner_protocol) != ETH_P_TEB)
+			return false;
+		if (skb_inner_mac_header(skb) - skb_transport_header(skb) != 8)
+			return false;
+		greh = (struct gre_base_hdr *)skb_transport_header(skb);
+		return !(greh->flags & (GRE_CSUM | GRE_SEQ));
+	case IPPROTO_UDP:
+		/* If the port is registered for a UDP tunnel, we assume the
+		 * packet is for that tunnel, and the NIC will handle it as
+		 * such.  If not, the NIC won't know what to do with it.
+		 */
+		dst_port = udp_hdr(skb)->dest;
+		return efx->type->udp_tnl_has_port(efx, dst_port);
+	default:
+		return false;
+	}
+}
+
+netdev_features_t efx_siena_features_check(struct sk_buff *skb,
+					   struct net_device *dev,
+					   netdev_features_t features)
+{
+	struct efx_nic *efx = netdev_priv(dev);
+
+	if (skb->encapsulation) {
+		if (features & NETIF_F_GSO_MASK)
+			/* Hardware can only do TSO with at most 208 bytes
+			 * of headers.
+			 */
+			if (skb_inner_transport_offset(skb) >
+			    EFX_TSO2_MAX_HDRLEN)
+				features &= ~(NETIF_F_GSO_MASK);
+		if (features & (NETIF_F_GSO_MASK | NETIF_F_CSUM_MASK))
+			if (!efx_can_encap_offloads(efx, skb))
+				features &= ~(NETIF_F_GSO_MASK |
+					      NETIF_F_CSUM_MASK);
+	}
+	return features;
+}
+
+int efx_siena_get_phys_port_id(struct net_device *net_dev,
+			       struct netdev_phys_item_id *ppid)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+
+	if (efx->type->get_phys_port_id)
+		return efx->type->get_phys_port_id(efx, ppid);
+	else
+		return -EOPNOTSUPP;
+}
+
+int efx_siena_get_phys_port_name(struct net_device *net_dev,
+				 char *name, size_t len)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+
+	if (snprintf(name, len, "p%u", efx->port_num) >= len)
+		return -EINVAL;
+	return 0;
+}