Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1116 insertions, 0 deletions

diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
new file mode 100644
index 0000000000..95a4a3cdc8
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.c
@@ -0,0 +1,1116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * atusb.c - Driver for the ATUSB IEEE 802.15.4 dongle
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * Copyright (c) 2015 - 2016 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ * Based on at86rf230.c and spi_atusb.c.
+ * at86rf230.c is
+ * Copyright (C) 2009 Siemens AG
+ * Written by: Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ *
+ * spi_atusb.c is
+ * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com>
+ * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org>
+ * Copyright (c) 2011 Werner Almesberger <werner@almesberger.net>
+ *
+ * USB initialization is
+ * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com>
+ *
+ * Busware HUL support is
+ * Copyright (c) 2017 Josef Filzmaier <j.filzmaier@gmx.at>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/usb.h>
+#include <linux/skbuff.h>
+
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+#include "at86rf230.h"
+#include "atusb.h"
+
+#define ATUSB_JEDEC_ATMEL	0x1f	/* JEDEC manufacturer ID */
+
+#define ATUSB_NUM_RX_URBS	4	/* allow for a bit of local latency */
+#define ATUSB_ALLOC_DELAY_MS	100	/* delay after failed allocation */
+#define ATUSB_TX_TIMEOUT_MS	200	/* on the air timeout */
+
+struct atusb {
+	struct ieee802154_hw *hw;
+	struct usb_device *usb_dev;
+	struct atusb_chip_data *data;
+	int shutdown;			/* non-zero if shutting down */
+	int err;			/* set by first error */
+
+	/* RX variables */
+	struct delayed_work work;	/* memory allocations */
+	struct usb_anchor idle_urbs;	/* URBs waiting to be submitted */
+	struct usb_anchor rx_urbs;	/* URBs waiting for reception */
+
+	/* TX variables */
+	struct usb_ctrlrequest tx_dr;
+	struct urb *tx_urb;
+	struct sk_buff *tx_skb;
+	u8 tx_ack_seq;		/* current TX ACK sequence number */
+
+	/* Firmware variable */
+	unsigned char fw_ver_maj;	/* Firmware major version number */
+	unsigned char fw_ver_min;	/* Firmware minor version number */
+	unsigned char fw_hw_type;	/* Firmware hardware type */
+};
+
+struct atusb_chip_data {
+	u16 t_channel_switch;
+	int rssi_base_val;
+
+	int (*set_channel)(struct ieee802154_hw*, u8, u8);
+	int (*set_txpower)(struct ieee802154_hw*, s32);
+};
+
+static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask,
+			      u8 shift, u8 value)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	u8 orig, tmp;
+	int ret = 0;
+
+	dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, reg, &orig, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	/* Write the value only into that part of the register which is allowed
+	 * by the mask. All other bits stay as before.
+	 */
+	tmp = orig & ~mask;
+	tmp |= (value << shift) & mask;
+
+	if (tmp != orig)
+		ret = usb_control_msg_send(usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+					   tmp, reg, NULL, 0, 1000, GFP_KERNEL);
+
+	return ret;
+}
+
+static int atusb_read_subreg(struct atusb *lp,
+			     unsigned int addr, unsigned int mask,
+			     unsigned int shift)
+{
+	int reg, ret;
+
+	ret = usb_control_msg_recv(lp->usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, addr, &reg, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	reg = (reg & mask) >> shift;
+
+	return reg;
+}
+
+static int atusb_get_and_clear_error(struct atusb *atusb)
+{
+	int err = atusb->err;
+
+	atusb->err = 0;
+	return err;
+}
+
+/* ----- skb allocation ---------------------------------------------------- */
+
+#define MAX_PSDU	127
+#define MAX_RX_XFER	(1 + MAX_PSDU + 2 + 1)	/* PHR+PSDU+CRC+LQI */
+
+#define SKB_ATUSB(skb)	(*(struct atusb **)(skb)->cb)
+
+static void atusb_in(struct urb *urb);
+
+static int atusb_submit_rx_urb(struct atusb *atusb, struct urb *urb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct sk_buff *skb = urb->context;
+	int ret;
+
+	if (!skb) {
+		skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL);
+		if (!skb) {
+			dev_warn_ratelimited(&usb_dev->dev,
+					     "atusb_in: can't allocate skb\n");
+			return -ENOMEM;
+		}
+		skb_put(skb, MAX_RX_XFER);
+		SKB_ATUSB(skb) = atusb;
+	}
+
+	usb_fill_bulk_urb(urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1),
+			  skb->data, MAX_RX_XFER, atusb_in, skb);
+	usb_anchor_urb(urb, &atusb->rx_urbs);
+
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret) {
+		usb_unanchor_urb(urb);
+		kfree_skb(skb);
+		urb->context = NULL;
+	}
+	return ret;
+}
+
+static void atusb_work_urbs(struct work_struct *work)
+{
+	struct atusb *atusb =
+	    container_of(to_delayed_work(work), struct atusb, work);
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct urb *urb;
+	int ret;
+
+	if (atusb->shutdown)
+		return;
+
+	do {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			return;
+		ret = atusb_submit_rx_urb(atusb, urb);
+	} while (!ret);
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	dev_warn_ratelimited(&usb_dev->dev,
+			     "atusb_in: can't allocate/submit URB (%d)\n", ret);
+	schedule_delayed_work(&atusb->work,
+			      msecs_to_jiffies(ATUSB_ALLOC_DELAY_MS) + 1);
+}
+
+/* ----- Asynchronous USB -------------------------------------------------- */
+
+static void atusb_tx_done(struct atusb *atusb, u8 seq, int reason)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	u8 expect = atusb->tx_ack_seq;
+
+	dev_dbg(&usb_dev->dev, "%s (0x%02x/0x%02x)\n", __func__, seq, expect);
+	if (seq == expect) {
+		/* TODO check for ifs handling in firmware */
+		if (reason == IEEE802154_SUCCESS)
+			ieee802154_xmit_complete(atusb->hw, atusb->tx_skb, false);
+		else
+			ieee802154_xmit_error(atusb->hw, atusb->tx_skb, reason);
+	} else {
+		/* TODO I experience this case when atusb has a tx complete
+		 * irq before probing, we should fix the firmware it's an
+		 * unlikely case now that seq == expect is then true, but can
+		 * happen and fail with a tx_skb = NULL;
+		 */
+		ieee802154_xmit_hw_error(atusb->hw, atusb->tx_skb);
+	}
+}
+
+static void atusb_in_good(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+	int result = IEEE802154_SUCCESS;
+	u8 len, lqi, trac;
+
+	if (!urb->actual_length) {
+		dev_dbg(&usb_dev->dev, "atusb_in: zero-sized URB ?\n");
+		return;
+	}
+
+	len = *skb->data;
+
+	switch (urb->actual_length) {
+	case 2:
+		trac = TRAC_MASK(*(skb->data + 1));
+		switch (trac) {
+		case TRAC_SUCCESS:
+		case TRAC_SUCCESS_DATA_PENDING:
+			/* already IEEE802154_SUCCESS */
+			break;
+		case TRAC_CHANNEL_ACCESS_FAILURE:
+			result = IEEE802154_CHANNEL_ACCESS_FAILURE;
+			break;
+		case TRAC_NO_ACK:
+			result = IEEE802154_NO_ACK;
+			break;
+		default:
+			result = IEEE802154_SYSTEM_ERROR;
+		}
+
+		fallthrough;
+	case 1:
+		atusb_tx_done(atusb, len, result);
+		return;
+	}
+
+	if (len + 1 > urb->actual_length - 1) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame len %d+1 > URB %u-1\n",
+			len, urb->actual_length);
+		return;
+	}
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame corrupted\n");
+		return;
+	}
+
+	lqi = skb->data[len + 1];
+	dev_dbg(&usb_dev->dev, "atusb_in: rx len %d lqi 0x%02x\n", len, lqi);
+	skb_pull(skb, 1);	/* remove PHR */
+	skb_trim(skb, len);	/* get payload only */
+	ieee802154_rx_irqsafe(atusb->hw, skb, lqi);
+	urb->context = NULL;	/* skb is gone */
+}
+
+static void atusb_in(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+
+	dev_dbg(&usb_dev->dev, "%s: status %d len %d\n", __func__,
+		urb->status, urb->actual_length);
+	if (urb->status) {
+		if (urb->status == -ENOENT) { /* being killed */
+			kfree_skb(skb);
+			urb->context = NULL;
+			return;
+		}
+		dev_dbg(&usb_dev->dev, "%s: URB error %d\n", __func__, urb->status);
+	} else {
+		atusb_in_good(urb);
+	}
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	if (!atusb->shutdown)
+		schedule_delayed_work(&atusb->work, 0);
+}
+
+/* ----- URB allocation/deallocation --------------------------------------- */
+
+static void atusb_free_urbs(struct atusb *atusb)
+{
+	struct urb *urb;
+
+	while (1) {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			break;
+		kfree_skb(urb->context);
+		usb_free_urb(urb);
+	}
+}
+
+static int atusb_alloc_urbs(struct atusb *atusb, int n)
+{
+	struct urb *urb;
+
+	while (n) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			atusb_free_urbs(atusb);
+			return -ENOMEM;
+		}
+		usb_anchor_urb(urb, &atusb->idle_urbs);
+		usb_free_urb(urb);
+		n--;
+	}
+	return 0;
+}
+
+/* ----- IEEE 802.15.4 interface operations -------------------------------- */
+
+static void atusb_xmit_complete(struct urb *urb)
+{
+	dev_dbg(&urb->dev->dev, "atusb_xmit urb completed");
+}
+
+static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "%s (%d)\n", __func__, skb->len);
+	atusb->tx_skb = skb;
+	atusb->tx_ack_seq++;
+	atusb->tx_dr.wIndex = cpu_to_le16(atusb->tx_ack_seq);
+	atusb->tx_dr.wLength = cpu_to_le16(skb->len);
+
+	usb_fill_control_urb(atusb->tx_urb, usb_dev,
+			     usb_sndctrlpipe(usb_dev, 0),
+			     (unsigned char *)&atusb->tx_dr, skb->data,
+			     skb->len, atusb_xmit_complete, NULL);
+	ret = usb_submit_urb(atusb->tx_urb, GFP_ATOMIC);
+	dev_dbg(&usb_dev->dev, "%s done (%d)\n", __func__, ret);
+	return ret;
+}
+
+static int atusb_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	WARN_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
+				  struct ieee802154_hw_addr_filt *filt,
+				  unsigned long changed)
+{
+	struct atusb *atusb = hw->priv;
+	struct device *dev = &atusb->usb_dev->dev;
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		dev_vdbg(dev, "%s called for saddr\n", __func__);
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     addr, RG_SHORT_ADDR_0, NULL, 0, 1000, GFP_KERNEL);
+
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     addr >> 8, RG_SHORT_ADDR_1, NULL, 0, 1000, GFP_KERNEL);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
+		dev_vdbg(dev, "%s called for pan id\n", __func__);
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     pan, RG_PAN_ID_0, NULL, 0, 1000, GFP_KERNEL);
+
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     pan >> 8, RG_PAN_ID_1, NULL, 0, 1000, GFP_KERNEL);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 i, addr[IEEE802154_EXTENDED_ADDR_LEN];
+
+		memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN);
+		dev_vdbg(dev, "%s called for IEEE addr\n", __func__);
+		for (i = 0; i < 8; i++)
+			usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+					     addr[i], RG_IEEE_ADDR_0 + i, NULL, 0,
+					     1000, GFP_KERNEL);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		dev_vdbg(dev, "%s called for panc change\n", __func__);
+		if (filt->pan_coord)
+			atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 1);
+		else
+			atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 0);
+	}
+
+	return atusb_get_and_clear_error(atusb);
+}
+
+static int atusb_start(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "%s\n", __func__);
+	schedule_delayed_work(&atusb->work, 0);
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 1, 0,
+			     NULL, 0, 1000, GFP_KERNEL);
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret < 0)
+		usb_kill_anchored_urbs(&atusb->idle_urbs);
+	return ret;
+}
+
+static void atusb_stop(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "%s\n", __func__);
+	usb_kill_anchored_urbs(&atusb->idle_urbs);
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 0, 0,
+			     NULL, 0, 1000, GFP_KERNEL);
+	atusb_get_and_clear_error(atusb);
+}
+
+#define ATUSB_MAX_TX_POWERS 0xF
+static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+static int
+atusb_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+
+	if (atusb->data)
+		return atusb->data->set_txpower(hw, mbm);
+	else
+		return -ENOTSUPP;
+}
+
+static int
+atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+		if (hw->phy->supported.tx_powers[i] == mbm)
+			return atusb_write_subreg(atusb, SR_TX_PWR_23X, i);
+	}
+
+	return -EINVAL;
+}
+
+static int
+hulusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+		if (hw->phy->supported.tx_powers[i] == mbm)
+			return atusb_write_subreg(hw->priv, SR_TX_PWR_212, i);
+	}
+
+	return -EINVAL;
+}
+
+#define ATUSB_MAX_ED_LEVELS 0xF
+static const s32 atusb_ed_levels[ATUSB_MAX_ED_LEVELS + 1] = {
+	-9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
+	-7100, -6900, -6700, -6500, -6300, -6100,
+};
+
+#define AT86RF212_MAX_TX_POWERS 0x1F
+static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+#define AT86RF2XX_MAX_ED_LEVELS 0xF
+static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
+	-8000, -7800, -7600, -7400, -7200, -7000,
+};
+
+static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
+	-7800, -7600, -7400, -7200, -7000, -6800,
+};
+
+static int
+atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
+{
+	struct atusb *atusb = hw->priv;
+	u8 val;
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		val = 1;
+		break;
+	case NL802154_CCA_CARRIER:
+		val = 2;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			val = 3;
+			break;
+		case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
+			val = 0;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return atusb_write_subreg(atusb, SR_CCA_MODE, val);
+}
+
+static int hulusb_set_cca_ed_level(struct atusb *lp, int rssi_base_val)
+{
+	int cca_ed_thres;
+
+	cca_ed_thres = atusb_read_subreg(lp, SR_CCA_ED_THRES);
+	if (cca_ed_thres < 0)
+		return cca_ed_thres;
+
+	switch (rssi_base_val) {
+	case -98:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
+		break;
+	case -100:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+
+static int
+atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+		if (hw->phy->supported.cca_ed_levels[i] == mbm)
+			return atusb_write_subreg(atusb, SR_CCA_ED_THRES, i);
+	}
+
+	return -EINVAL;
+}
+
+static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret = -ENOTSUPP;
+
+	if (atusb->data) {
+		ret = atusb->data->set_channel(hw, page, channel);
+		/* @@@ ugly synchronization */
+		msleep(atusb->data->t_channel_switch);
+	}
+
+	return ret;
+}
+
+static int atusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	ret = atusb_write_subreg(atusb, SR_CHANNEL, channel);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int hulusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	int rc;
+	int rssi_base_val;
+
+	struct atusb *lp = hw->priv;
+
+	if (channel == 0)
+		rc = atusb_write_subreg(lp, SR_SUB_MODE, 0);
+	else
+		rc = atusb_write_subreg(lp, SR_SUB_MODE, 1);
+	if (rc < 0)
+		return rc;
+
+	if (page == 0) {
+		rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 0);
+		rssi_base_val = -100;
+	} else {
+		rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 1);
+		rssi_base_val = -98;
+	}
+	if (rc < 0)
+		return rc;
+
+	rc = hulusb_set_cca_ed_level(lp, rssi_base_val);
+	if (rc < 0)
+		return rc;
+
+	return atusb_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+static int
+atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	ret = atusb_write_subreg(atusb, SR_MIN_BE, min_be);
+	if (ret)
+		return ret;
+
+	ret = atusb_write_subreg(atusb, SR_MAX_BE, max_be);
+	if (ret)
+		return ret;
+
+	return atusb_write_subreg(atusb, SR_MAX_CSMA_RETRIES, retries);
+}
+
+static int
+hulusb_set_lbt(struct ieee802154_hw *hw, bool on)
+{
+	struct atusb *atusb = hw->priv;
+
+	return atusb_write_subreg(atusb, SR_CSMA_LBT_MODE, on);
+}
+
+static int
+atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	struct atusb *atusb = hw->priv;
+
+	return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries);
+}
+
+static int
+atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	if (on) {
+		ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 1);
+		if (ret < 0)
+			return ret;
+
+		ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 1);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 0);
+		if (ret < 0)
+			return ret;
+
+		ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct atusb_chip_data atusb_chip_data = {
+	.t_channel_switch = 1,
+	.rssi_base_val = -91,
+	.set_txpower = atusb_set_txpower,
+	.set_channel = atusb_set_channel,
+};
+
+static struct atusb_chip_data hulusb_chip_data = {
+	.t_channel_switch = 11,
+	.rssi_base_val = -100,
+	.set_txpower = hulusb_set_txpower,
+	.set_channel = hulusb_set_channel,
+};
+
+static const struct ieee802154_ops atusb_ops = {
+	.owner			= THIS_MODULE,
+	.xmit_async		= atusb_xmit,
+	.ed			= atusb_ed,
+	.set_channel		= atusb_channel,
+	.start			= atusb_start,
+	.stop			= atusb_stop,
+	.set_hw_addr_filt	= atusb_set_hw_addr_filt,
+	.set_txpower		= atusb_txpower,
+	.set_lbt		= hulusb_set_lbt,
+	.set_cca_mode		= atusb_set_cca_mode,
+	.set_cca_ed_level	= atusb_set_cca_ed_level,
+	.set_csma_params	= atusb_set_csma_params,
+	.set_frame_retries	= atusb_set_frame_retries,
+	.set_promiscuous_mode	= atusb_set_promiscuous_mode,
+};
+
+/* ----- Firmware and chip version information ----------------------------- */
+
+static int atusb_get_and_show_revision(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	char *hw_name;
+	unsigned char buffer[3];
+	int ret;
+
+	/* Get a couple of the ATMega Firmware values */
+	ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+				   buffer, 3, 1000, GFP_KERNEL);
+	if (!ret) {
+		atusb->fw_ver_maj = buffer[0];
+		atusb->fw_ver_min = buffer[1];
+		atusb->fw_hw_type = buffer[2];
+
+		switch (atusb->fw_hw_type) {
+		case ATUSB_HW_TYPE_100813:
+		case ATUSB_HW_TYPE_101216:
+		case ATUSB_HW_TYPE_110131:
+			hw_name = "ATUSB";
+			atusb->data = &atusb_chip_data;
+			break;
+		case ATUSB_HW_TYPE_RZUSB:
+			hw_name = "RZUSB";
+			atusb->data = &atusb_chip_data;
+			break;
+		case ATUSB_HW_TYPE_HULUSB:
+			hw_name = "HULUSB";
+			atusb->data = &hulusb_chip_data;
+			break;
+		default:
+			hw_name = "UNKNOWN";
+			atusb->err = -ENOTSUPP;
+			ret = -ENOTSUPP;
+			break;
+		}
+
+		dev_info(&usb_dev->dev,
+			 "Firmware: major: %u, minor: %u, hardware type: %s (%d)\n",
+			 atusb->fw_ver_maj, atusb->fw_ver_min, hw_name,
+			 atusb->fw_hw_type);
+	}
+	if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) {
+		dev_info(&usb_dev->dev,
+			 "Firmware version (%u.%u) predates our first public release.",
+			 atusb->fw_ver_maj, atusb->fw_ver_min);
+		dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
+	}
+
+	return ret;
+}
+
+static int atusb_get_and_show_build(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	char *build;
+	int ret;
+
+	build = kmalloc(ATUSB_BUILD_SIZE + 1, GFP_KERNEL);
+	if (!build)
+		return -ENOMEM;
+
+	ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD,
+			      ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000);
+	if (ret >= 0) {
+		build[ret] = 0;
+		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
+	}
+
+	kfree(build);
+	return ret;
+}
+
+static int atusb_get_and_conf_chip(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	u8 man_id_0, man_id_1, part_num, version_num;
+	const char *chip;
+	struct ieee802154_hw *hw = atusb->hw;
+	int ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_MAN_ID_0, &man_id_0, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_MAN_ID_1, &man_id_1, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_PART_NUM, &part_num, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_VERSION_NUM, &version_num, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+		    IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
+
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			 WPAN_PHY_FLAG_CCA_MODE;
+
+	hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+				       BIT(NL802154_CCA_CARRIER) |
+				       BIT(NL802154_CCA_ENERGY_CARRIER);
+	hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+				      BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
+	hw->phy->current_page = 0;
+
+	if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) {
+		dev_err(&usb_dev->dev,
+			"non-Atmel transceiver xxxx%02x%02x\n",
+			man_id_1, man_id_0);
+		goto fail;
+	}
+
+	switch (part_num) {
+	case 2:
+		chip = "AT86RF230";
+		atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+		atusb->hw->phy->current_channel = 11;	/* reset default */
+		atusb->hw->phy->supported.tx_powers = atusb_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+		hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+		break;
+	case 3:
+		chip = "AT86RF231";
+		atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+		atusb->hw->phy->current_channel = 11;	/* reset default */
+		atusb->hw->phy->supported.tx_powers = atusb_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+		hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+		break;
+	case 7:
+		chip = "AT86RF212";
+		atusb->hw->flags |= IEEE802154_HW_LBT;
+		atusb->hw->phy->supported.channels[0] = 0x00007FF;
+		atusb->hw->phy->supported.channels[2] = 0x00007FF;
+		atusb->hw->phy->current_channel = 5;
+		atusb->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
+		atusb->hw->phy->supported.tx_powers = at86rf212_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
+		atusb->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		atusb->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		break;
+	default:
+		dev_err(&usb_dev->dev,
+			"unexpected transceiver, part 0x%02x version 0x%02x\n",
+			part_num, version_num);
+		goto fail;
+	}
+
+	hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
+	hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7];
+
+	dev_info(&usb_dev->dev, "ATUSB: %s version %d\n", chip, version_num);
+
+	return 0;
+
+fail:
+	atusb->err = -ENODEV;
+	return -ENODEV;
+}
+
+static int atusb_set_extended_addr(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN];
+	__le64 extended_addr;
+	u64 addr;
+	int ret;
+
+	/* Firmware versions before 0.3 do not support the EUI64_READ command.
+	 * Just use a random address and be done.
+	 */
+	if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) {
+		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+		return 0;
+	}
+
+	/* Firmware is new enough so we fetch the address from EEPROM */
+	ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
+				   buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000, GFP_KERNEL);
+	if (ret < 0) {
+		dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n");
+		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+		return ret;
+	}
+
+	memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN);
+	/* Check if read address is not empty and the unicast bit is set correctly */
+	if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) {
+		dev_info(&usb_dev->dev, "no permanent extended address found, random address set\n");
+		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+	} else {
+		atusb->hw->phy->perm_extended_addr = extended_addr;
+		addr = swab64((__force u64)atusb->hw->phy->perm_extended_addr);
+		dev_info(&usb_dev->dev, "Read permanent extended address %8phC from device\n",
+			 &addr);
+	}
+
+	return ret;
+}
+
+/* ----- Setup ------------------------------------------------------------- */
+
+static int atusb_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(interface);
+	struct ieee802154_hw *hw;
+	struct atusb *atusb = NULL;
+	int ret = -ENOMEM;
+
+	hw = ieee802154_alloc_hw(sizeof(struct atusb), &atusb_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	atusb = hw->priv;
+	atusb->hw = hw;
+	atusb->usb_dev = usb_get_dev(usb_dev);
+	usb_set_intfdata(interface, atusb);
+
+	atusb->shutdown = 0;
+	atusb->err = 0;
+	INIT_DELAYED_WORK(&atusb->work, atusb_work_urbs);
+	init_usb_anchor(&atusb->idle_urbs);
+	init_usb_anchor(&atusb->rx_urbs);
+
+	if (atusb_alloc_urbs(atusb, ATUSB_NUM_RX_URBS))
+		goto fail;
+
+	atusb->tx_dr.bRequestType = ATUSB_REQ_TO_DEV;
+	atusb->tx_dr.bRequest = ATUSB_TX;
+	atusb->tx_dr.wValue = cpu_to_le16(0);
+
+	atusb->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!atusb->tx_urb)
+		goto fail;
+
+	hw->parent = &usb_dev->dev;
+
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RF_RESET, ATUSB_REQ_TO_DEV, 0, 0,
+			     NULL, 0, 1000, GFP_KERNEL);
+	atusb_get_and_conf_chip(atusb);
+	atusb_get_and_show_revision(atusb);
+	atusb_get_and_show_build(atusb);
+	atusb_set_extended_addr(atusb);
+
+	if ((atusb->fw_ver_maj == 0 && atusb->fw_ver_min >= 3) || atusb->fw_ver_maj > 0)
+		hw->flags |= IEEE802154_HW_FRAME_RETRIES;
+
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret) {
+		dev_err(&atusb->usb_dev->dev,
+			"%s: initialization failed, error = %d\n",
+			__func__, ret);
+		goto fail;
+	}
+
+	ret = ieee802154_register_hw(hw);
+	if (ret)
+		goto fail;
+
+	/* If we just powered on, we're now in P_ON and need to enter TRX_OFF
+	 * explicitly. Any resets after that will send us straight to TRX_OFF,
+	 * making the command below redundant.
+	 */
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+			     STATE_FORCE_TRX_OFF, RG_TRX_STATE, NULL, 0, 1000, GFP_KERNEL);
+
+	msleep(1);	/* reset => TRX_OFF, tTR13 = 37 us */
+
+#if 0
+	/* Calculating the maximum time available to empty the frame buffer
+	 * on reception:
+	 *
+	 * According to [1], the inter-frame gap is
+	 * R * 20 * 16 us + 128 us
+	 * where R is a random number from 0 to 7. Furthermore, we have 20 bit
+	 * times (80 us at 250 kbps) of SHR of the next frame before the
+	 * transceiver begins storing data in the frame buffer.
+	 *
+	 * This yields a minimum time of 208 us between the last data of a
+	 * frame and the first data of the next frame. This time is further
+	 * reduced by interrupt latency in the atusb firmware.
+	 *
+	 * atusb currently needs about 500 us to retrieve a maximum-sized
+	 * frame. We therefore have to allow reception of a new frame to begin
+	 * while we retrieve the previous frame.
+	 *
+	 * [1] "JN-AN-1035 Calculating data rates in an IEEE 802.15.4-based
+	 *      network", Jennic 2006.
+	 *     http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf
+	 */
+
+	atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1);
+#endif
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+			     0xff, RG_IRQ_MASK, NULL, 0, 1000, GFP_KERNEL);
+
+	ret = atusb_get_and_clear_error(atusb);
+	if (!ret)
+		return 0;
+
+	dev_err(&atusb->usb_dev->dev,
+		"%s: setup failed, error = %d\n",
+		__func__, ret);
+
+	ieee802154_unregister_hw(hw);
+fail:
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+	usb_put_dev(usb_dev);
+	ieee802154_free_hw(hw);
+	return ret;
+}
+
+static void atusb_disconnect(struct usb_interface *interface)
+{
+	struct atusb *atusb = usb_get_intfdata(interface);
+
+	dev_dbg(&atusb->usb_dev->dev, "%s\n", __func__);
+
+	atusb->shutdown = 1;
+	cancel_delayed_work_sync(&atusb->work);
+
+	usb_kill_anchored_urbs(&atusb->rx_urbs);
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+
+	ieee802154_unregister_hw(atusb->hw);
+
+	usb_put_dev(atusb->usb_dev);
+
+	ieee802154_free_hw(atusb->hw);
+
+	usb_set_intfdata(interface, NULL);
+
+	pr_debug("%s done\n", __func__);
+}
+
+/* The devices we work with */
+static const struct usb_device_id atusb_device_table[] = {
+	{
+		.match_flags		= USB_DEVICE_ID_MATCH_DEVICE |
+					  USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor		= ATUSB_VENDOR_ID,
+		.idProduct		= ATUSB_PRODUCT_ID,
+		.bInterfaceClass	= USB_CLASS_VENDOR_SPEC
+	},
+	/* end with null element */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, atusb_device_table);
+
+static struct usb_driver atusb_driver = {
+	.name		= "atusb",
+	.probe		= atusb_probe,
+	.disconnect	= atusb_disconnect,
+	.id_table	= atusb_device_table,
+};
+module_usb_driver(atusb_driver);
+
+MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>");
+MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>");
+MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>");
+MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>");
+MODULE_AUTHOR("Josef Filzmaier <j.filzmaier@gmx.at>");
+MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver");
+MODULE_LICENSE("GPL");