Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1401 insertions, 0 deletions

diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
new file mode 100644
index 0000000000..ee4cfbf2c5
--- /dev/null
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -0,0 +1,1401 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2012 Alan Ott <alan@signal11.us>
+ *                    Signal 11 Software
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/ieee802154.h>
+#include <linux/irq.h>
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+/* MRF24J40 Short Address Registers */
+#define REG_RXMCR	0x00  /* Receive MAC control */
+#define BIT_PROMI	BIT(0)
+#define BIT_ERRPKT	BIT(1)
+#define BIT_NOACKRSP	BIT(5)
+#define BIT_PANCOORD	BIT(3)
+
+#define REG_PANIDL	0x01  /* PAN ID (low) */
+#define REG_PANIDH	0x02  /* PAN ID (high) */
+#define REG_SADRL	0x03  /* Short address (low) */
+#define REG_SADRH	0x04  /* Short address (high) */
+#define REG_EADR0	0x05  /* Long address (low) (high is EADR7) */
+#define REG_EADR1	0x06
+#define REG_EADR2	0x07
+#define REG_EADR3	0x08
+#define REG_EADR4	0x09
+#define REG_EADR5	0x0A
+#define REG_EADR6	0x0B
+#define REG_EADR7	0x0C
+#define REG_RXFLUSH	0x0D
+#define REG_ORDER	0x10
+#define REG_TXMCR	0x11  /* Transmit MAC control */
+#define TXMCR_MIN_BE_SHIFT		3
+#define TXMCR_MIN_BE_MASK		0x18
+#define TXMCR_CSMA_RETRIES_SHIFT	0
+#define TXMCR_CSMA_RETRIES_MASK		0x07
+
+#define REG_ACKTMOUT	0x12
+#define REG_ESLOTG1	0x13
+#define REG_SYMTICKL	0x14
+#define REG_SYMTICKH	0x15
+#define REG_PACON0	0x16  /* Power Amplifier Control */
+#define REG_PACON1	0x17  /* Power Amplifier Control */
+#define REG_PACON2	0x18  /* Power Amplifier Control */
+#define REG_TXBCON0	0x1A
+#define REG_TXNCON	0x1B  /* Transmit Normal FIFO Control */
+#define BIT_TXNTRIG	BIT(0)
+#define BIT_TXNSECEN	BIT(1)
+#define BIT_TXNACKREQ	BIT(2)
+
+#define REG_TXG1CON	0x1C
+#define REG_TXG2CON	0x1D
+#define REG_ESLOTG23	0x1E
+#define REG_ESLOTG45	0x1F
+#define REG_ESLOTG67	0x20
+#define REG_TXPEND	0x21
+#define REG_WAKECON	0x22
+#define REG_FROMOFFSET	0x23
+#define REG_TXSTAT	0x24  /* TX MAC Status Register */
+#define REG_TXBCON1	0x25
+#define REG_GATECLK	0x26
+#define REG_TXTIME	0x27
+#define REG_HSYMTMRL	0x28
+#define REG_HSYMTMRH	0x29
+#define REG_SOFTRST	0x2A  /* Soft Reset */
+#define REG_SECCON0	0x2C
+#define REG_SECCON1	0x2D
+#define REG_TXSTBL	0x2E  /* TX Stabilization */
+#define REG_RXSR	0x30
+#define REG_INTSTAT	0x31  /* Interrupt Status */
+#define BIT_TXNIF	BIT(0)
+#define BIT_RXIF	BIT(3)
+#define BIT_SECIF	BIT(4)
+#define BIT_SECIGNORE	BIT(7)
+
+#define REG_INTCON	0x32  /* Interrupt Control */
+#define BIT_TXNIE	BIT(0)
+#define BIT_RXIE	BIT(3)
+#define BIT_SECIE	BIT(4)
+
+#define REG_GPIO	0x33  /* GPIO */
+#define REG_TRISGPIO	0x34  /* GPIO direction */
+#define REG_SLPACK	0x35
+#define REG_RFCTL	0x36  /* RF Control Mode Register */
+#define BIT_RFRST	BIT(2)
+
+#define REG_SECCR2	0x37
+#define REG_BBREG0	0x38
+#define REG_BBREG1	0x39  /* Baseband Registers */
+#define BIT_RXDECINV	BIT(2)
+
+#define REG_BBREG2	0x3A  /* */
+#define BBREG2_CCA_MODE_SHIFT	6
+#define BBREG2_CCA_MODE_MASK	0xc0
+
+#define REG_BBREG3	0x3B
+#define REG_BBREG4	0x3C
+#define REG_BBREG6	0x3E  /* */
+#define REG_CCAEDTH	0x3F  /* Energy Detection Threshold */
+
+/* MRF24J40 Long Address Registers */
+#define REG_RFCON0	0x200  /* RF Control Registers */
+#define RFCON0_CH_SHIFT	4
+#define RFCON0_CH_MASK	0xf0
+#define RFOPT_RECOMMEND	3
+
+#define REG_RFCON1	0x201
+#define REG_RFCON2	0x202
+#define REG_RFCON3	0x203
+
+#define TXPWRL_MASK	0xc0
+#define TXPWRL_SHIFT	6
+#define TXPWRL_30	0x3
+#define TXPWRL_20	0x2
+#define TXPWRL_10	0x1
+#define TXPWRL_0	0x0
+
+#define TXPWRS_MASK	0x38
+#define TXPWRS_SHIFT	3
+#define TXPWRS_6_3	0x7
+#define TXPWRS_4_9	0x6
+#define TXPWRS_3_7	0x5
+#define TXPWRS_2_8	0x4
+#define TXPWRS_1_9	0x3
+#define TXPWRS_1_2	0x2
+#define TXPWRS_0_5	0x1
+#define TXPWRS_0	0x0
+
+#define REG_RFCON5	0x205
+#define REG_RFCON6	0x206
+#define REG_RFCON7	0x207
+#define REG_RFCON8	0x208
+#define REG_SLPCAL0	0x209
+#define REG_SLPCAL1	0x20A
+#define REG_SLPCAL2	0x20B
+#define REG_RFSTATE	0x20F
+#define REG_RSSI	0x210
+#define REG_SLPCON0	0x211  /* Sleep Clock Control Registers */
+#define BIT_INTEDGE	BIT(1)
+
+#define REG_SLPCON1	0x220
+#define REG_WAKETIMEL	0x222  /* Wake-up Time Match Value Low */
+#define REG_WAKETIMEH	0x223  /* Wake-up Time Match Value High */
+#define REG_REMCNTL	0x224
+#define REG_REMCNTH	0x225
+#define REG_MAINCNT0	0x226
+#define REG_MAINCNT1	0x227
+#define REG_MAINCNT2	0x228
+#define REG_MAINCNT3	0x229
+#define REG_TESTMODE	0x22F  /* Test mode */
+#define REG_ASSOEAR0	0x230
+#define REG_ASSOEAR1	0x231
+#define REG_ASSOEAR2	0x232
+#define REG_ASSOEAR3	0x233
+#define REG_ASSOEAR4	0x234
+#define REG_ASSOEAR5	0x235
+#define REG_ASSOEAR6	0x236
+#define REG_ASSOEAR7	0x237
+#define REG_ASSOSAR0	0x238
+#define REG_ASSOSAR1	0x239
+#define REG_UNONCE0	0x240
+#define REG_UNONCE1	0x241
+#define REG_UNONCE2	0x242
+#define REG_UNONCE3	0x243
+#define REG_UNONCE4	0x244
+#define REG_UNONCE5	0x245
+#define REG_UNONCE6	0x246
+#define REG_UNONCE7	0x247
+#define REG_UNONCE8	0x248
+#define REG_UNONCE9	0x249
+#define REG_UNONCE10	0x24A
+#define REG_UNONCE11	0x24B
+#define REG_UNONCE12	0x24C
+#define REG_RX_FIFO	0x300  /* Receive FIFO */
+
+/* Device configuration: Only channels 11-26 on page 0 are supported. */
+#define MRF24J40_CHAN_MIN 11
+#define MRF24J40_CHAN_MAX 26
+#define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \
+		      - ((u32)1 << MRF24J40_CHAN_MIN))
+
+#define TX_FIFO_SIZE 128 /* From datasheet */
+#define RX_FIFO_SIZE 144 /* From datasheet */
+#define SET_CHANNEL_DELAY_US 192 /* From datasheet */
+
+enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC };
+
+/* Device Private Data */
+struct mrf24j40 {
+	struct spi_device *spi;
+	struct ieee802154_hw *hw;
+
+	struct regmap *regmap_short;
+	struct regmap *regmap_long;
+
+	/* for writing txfifo */
+	struct spi_message tx_msg;
+	u8 tx_hdr_buf[2];
+	struct spi_transfer tx_hdr_trx;
+	u8 tx_len_buf[2];
+	struct spi_transfer tx_len_trx;
+	struct spi_transfer tx_buf_trx;
+	struct sk_buff *tx_skb;
+
+	/* post transmit message to send frame out  */
+	struct spi_message tx_post_msg;
+	u8 tx_post_buf[2];
+	struct spi_transfer tx_post_trx;
+
+	/* for protect/unprotect/read length rxfifo */
+	struct spi_message rx_msg;
+	u8 rx_buf[3];
+	struct spi_transfer rx_trx;
+
+	/* receive handling */
+	struct spi_message rx_buf_msg;
+	u8 rx_addr_buf[2];
+	struct spi_transfer rx_addr_trx;
+	u8 rx_lqi_buf[2];
+	struct spi_transfer rx_lqi_trx;
+	u8 rx_fifo_buf[RX_FIFO_SIZE];
+	struct spi_transfer rx_fifo_buf_trx;
+
+	/* isr handling for reading intstat */
+	struct spi_message irq_msg;
+	u8 irq_buf[2];
+	struct spi_transfer irq_trx;
+};
+
+/* regmap information for short address register access */
+#define MRF24J40_SHORT_WRITE	0x01
+#define MRF24J40_SHORT_READ	0x00
+#define MRF24J40_SHORT_NUMREGS	0x3F
+
+/* regmap information for long address register access */
+#define MRF24J40_LONG_ACCESS	0x80
+#define MRF24J40_LONG_NUMREGS	0x38F
+
+/* Read/Write SPI Commands for Short and Long Address registers. */
+#define MRF24J40_READSHORT(reg) ((reg) << 1)
+#define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1)
+#define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5)
+#define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4)
+
+/* The datasheet indicates the theoretical maximum for SCK to be 10MHz */
+#define MAX_SPI_SPEED_HZ 10000000
+
+#define printdev(X) (&X->spi->dev)
+
+static bool
+mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case REG_RXMCR:
+	case REG_PANIDL:
+	case REG_PANIDH:
+	case REG_SADRL:
+	case REG_SADRH:
+	case REG_EADR0:
+	case REG_EADR1:
+	case REG_EADR2:
+	case REG_EADR3:
+	case REG_EADR4:
+	case REG_EADR5:
+	case REG_EADR6:
+	case REG_EADR7:
+	case REG_RXFLUSH:
+	case REG_ORDER:
+	case REG_TXMCR:
+	case REG_ACKTMOUT:
+	case REG_ESLOTG1:
+	case REG_SYMTICKL:
+	case REG_SYMTICKH:
+	case REG_PACON0:
+	case REG_PACON1:
+	case REG_PACON2:
+	case REG_TXBCON0:
+	case REG_TXNCON:
+	case REG_TXG1CON:
+	case REG_TXG2CON:
+	case REG_ESLOTG23:
+	case REG_ESLOTG45:
+	case REG_ESLOTG67:
+	case REG_TXPEND:
+	case REG_WAKECON:
+	case REG_FROMOFFSET:
+	case REG_TXBCON1:
+	case REG_GATECLK:
+	case REG_TXTIME:
+	case REG_HSYMTMRL:
+	case REG_HSYMTMRH:
+	case REG_SOFTRST:
+	case REG_SECCON0:
+	case REG_SECCON1:
+	case REG_TXSTBL:
+	case REG_RXSR:
+	case REG_INTCON:
+	case REG_TRISGPIO:
+	case REG_GPIO:
+	case REG_RFCTL:
+	case REG_SECCR2:
+	case REG_SLPACK:
+	case REG_BBREG0:
+	case REG_BBREG1:
+	case REG_BBREG2:
+	case REG_BBREG3:
+	case REG_BBREG4:
+	case REG_BBREG6:
+	case REG_CCAEDTH:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_short_reg_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mrf24j40_short_reg_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case REG_TXSTAT:
+	case REG_INTSTAT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case REG_TXSTAT:
+	case REG_INTSTAT:
+	case REG_RXFLUSH:
+	case REG_TXNCON:
+	case REG_SOFTRST:
+	case REG_RFCTL:
+	case REG_TXBCON0:
+	case REG_TXG1CON:
+	case REG_TXG2CON:
+	case REG_TXBCON1:
+	case REG_SECCON0:
+	case REG_RXSR:
+	case REG_SLPACK:
+	case REG_SECCR2:
+	case REG_BBREG6:
+	/* use them in spi_async and regmap so it's volatile */
+	case REG_BBREG1:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_short_reg_precious(struct device *dev, unsigned int reg)
+{
+	/* don't clear irq line on read */
+	switch (reg) {
+	case REG_INTSTAT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mrf24j40_short_regmap = {
+	.name = "mrf24j40_short",
+	.reg_bits = 7,
+	.val_bits = 8,
+	.pad_bits = 1,
+	.write_flag_mask = MRF24J40_SHORT_WRITE,
+	.read_flag_mask = MRF24J40_SHORT_READ,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = MRF24J40_SHORT_NUMREGS,
+	.writeable_reg = mrf24j40_short_reg_writeable,
+	.readable_reg = mrf24j40_short_reg_readable,
+	.volatile_reg = mrf24j40_short_reg_volatile,
+	.precious_reg = mrf24j40_short_reg_precious,
+};
+
+static bool
+mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case REG_RFCON0:
+	case REG_RFCON1:
+	case REG_RFCON2:
+	case REG_RFCON3:
+	case REG_RFCON5:
+	case REG_RFCON6:
+	case REG_RFCON7:
+	case REG_RFCON8:
+	case REG_SLPCAL2:
+	case REG_SLPCON0:
+	case REG_SLPCON1:
+	case REG_WAKETIMEL:
+	case REG_WAKETIMEH:
+	case REG_REMCNTL:
+	case REG_REMCNTH:
+	case REG_MAINCNT0:
+	case REG_MAINCNT1:
+	case REG_MAINCNT2:
+	case REG_MAINCNT3:
+	case REG_TESTMODE:
+	case REG_ASSOEAR0:
+	case REG_ASSOEAR1:
+	case REG_ASSOEAR2:
+	case REG_ASSOEAR3:
+	case REG_ASSOEAR4:
+	case REG_ASSOEAR5:
+	case REG_ASSOEAR6:
+	case REG_ASSOEAR7:
+	case REG_ASSOSAR0:
+	case REG_ASSOSAR1:
+	case REG_UNONCE0:
+	case REG_UNONCE1:
+	case REG_UNONCE2:
+	case REG_UNONCE3:
+	case REG_UNONCE4:
+	case REG_UNONCE5:
+	case REG_UNONCE6:
+	case REG_UNONCE7:
+	case REG_UNONCE8:
+	case REG_UNONCE9:
+	case REG_UNONCE10:
+	case REG_UNONCE11:
+	case REG_UNONCE12:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_long_reg_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mrf24j40_long_reg_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case REG_SLPCAL0:
+	case REG_SLPCAL1:
+	case REG_RFSTATE:
+	case REG_RSSI:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case REG_SLPCAL0:
+	case REG_SLPCAL1:
+	case REG_SLPCAL2:
+	case REG_RFSTATE:
+	case REG_RSSI:
+	case REG_MAINCNT3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mrf24j40_long_regmap = {
+	.name = "mrf24j40_long",
+	.reg_bits = 11,
+	.val_bits = 8,
+	.pad_bits = 5,
+	.write_flag_mask = MRF24J40_LONG_ACCESS,
+	.read_flag_mask = MRF24J40_LONG_ACCESS,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = MRF24J40_LONG_NUMREGS,
+	.writeable_reg = mrf24j40_long_reg_writeable,
+	.readable_reg = mrf24j40_long_reg_readable,
+	.volatile_reg = mrf24j40_long_reg_volatile,
+};
+
+static int mrf24j40_long_regmap_write(void *context, const void *data,
+				      size_t count)
+{
+	struct spi_device *spi = context;
+	u8 buf[3];
+
+	if (count > 3)
+		return -EINVAL;
+
+	/* regmap supports read/write mask only in frist byte
+	 * long write access need to set the 12th bit, so we
+	 * make special handling for write.
+	 */
+	memcpy(buf, data, count);
+	buf[1] |= (1 << 4);
+
+	return spi_write(spi, buf, count);
+}
+
+static int
+mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size,
+			  void *val, size_t val_size)
+{
+	struct spi_device *spi = context;
+
+	return spi_write_then_read(spi, reg, reg_size, val, val_size);
+}
+
+static const struct regmap_bus mrf24j40_long_regmap_bus = {
+	.write = mrf24j40_long_regmap_write,
+	.read = mrf24j40_long_regmap_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static void write_tx_buf_complete(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	__le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb);
+	u8 val = BIT_TXNTRIG;
+	int ret;
+
+	if (ieee802154_is_secen(fc))
+		val |= BIT_TXNSECEN;
+
+	if (ieee802154_is_ackreq(fc))
+		val |= BIT_TXNACKREQ;
+
+	devrec->tx_post_msg.complete = NULL;
+	devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON);
+	devrec->tx_post_buf[1] = val;
+
+	ret = spi_async(devrec->spi, &devrec->tx_post_msg);
+	if (ret)
+		dev_err(printdev(devrec), "SPI write Failed for transmit buf\n");
+}
+
+/* This function relies on an undocumented write method. Once a write command
+   and address is set, as many bytes of data as desired can be clocked into
+   the device. The datasheet only shows setting one byte at a time. */
+static int write_tx_buf(struct mrf24j40 *devrec, u16 reg,
+			const u8 *data, size_t length)
+{
+	u16 cmd;
+	int ret;
+
+	/* Range check the length. 2 bytes are used for the length fields.*/
+	if (length > TX_FIFO_SIZE-2) {
+		dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n");
+		length = TX_FIFO_SIZE-2;
+	}
+
+	cmd = MRF24J40_WRITELONG(reg);
+	devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff;
+	devrec->tx_hdr_buf[1] = cmd & 0xff;
+	devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */
+	devrec->tx_len_buf[1] = length; /* Total length */
+	devrec->tx_buf_trx.tx_buf = data;
+	devrec->tx_buf_trx.len = length;
+
+	ret = spi_async(devrec->spi, &devrec->tx_msg);
+	if (ret)
+		dev_err(printdev(devrec), "SPI write Failed for TX buf\n");
+
+	return ret;
+}
+
+static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len);
+	devrec->tx_skb = skb;
+
+	return write_tx_buf(devrec, 0x000, skb->data, skb->len);
+}
+
+static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	/* TODO: */
+	pr_warn("mrf24j40: ed not implemented\n");
+	*level = 0;
+	return 0;
+}
+
+static int mrf24j40_start(struct ieee802154_hw *hw)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "start\n");
+
+	/* Clear TXNIE and RXIE. Enable interrupts */
+	return regmap_update_bits(devrec->regmap_short, REG_INTCON,
+				  BIT_TXNIE | BIT_RXIE | BIT_SECIE, 0);
+}
+
+static void mrf24j40_stop(struct ieee802154_hw *hw)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "stop\n");
+
+	/* Set TXNIE and RXIE. Disable Interrupts */
+	regmap_update_bits(devrec->regmap_short, REG_INTCON,
+			   BIT_TXNIE | BIT_RXIE, BIT_TXNIE | BIT_RXIE);
+}
+
+static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+	int ret;
+
+	dev_dbg(printdev(devrec), "Set Channel %d\n", channel);
+
+	WARN_ON(page != 0);
+	WARN_ON(channel < MRF24J40_CHAN_MIN);
+	WARN_ON(channel > MRF24J40_CHAN_MAX);
+
+	/* Set Channel TODO */
+	val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND;
+	ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0,
+				 RFCON0_CH_MASK, val);
+	if (ret)
+		return ret;
+
+	/* RF Reset */
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST,
+				 BIT_RFRST);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0);
+	if (!ret)
+		udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
+
+	return ret;
+}
+
+static int mrf24j40_filter(struct ieee802154_hw *hw,
+			   struct ieee802154_hw_addr_filt *filt,
+			   unsigned long changed)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "filter\n");
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		/* Short Addr */
+		u8 addrh, addrl;
+
+		addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
+		addrl = le16_to_cpu(filt->short_addr) & 0xff;
+
+		regmap_write(devrec->regmap_short, REG_SADRH, addrh);
+		regmap_write(devrec->regmap_short, REG_SADRL, addrl);
+		dev_dbg(printdev(devrec),
+			"Set short addr to %04hx\n", filt->short_addr);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		/* Device Address */
+		u8 i, addr[8];
+
+		memcpy(addr, &filt->ieee_addr, 8);
+		for (i = 0; i < 8; i++)
+			regmap_write(devrec->regmap_short, REG_EADR0 + i,
+				     addr[i]);
+
+#ifdef DEBUG
+		pr_debug("Set long addr to: ");
+		for (i = 0; i < 8; i++)
+			pr_debug("%02hhx ", addr[7 - i]);
+		pr_debug("\n");
+#endif
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		/* PAN ID */
+		u8 panidl, panidh;
+
+		panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
+		panidl = le16_to_cpu(filt->pan_id) & 0xff;
+		regmap_write(devrec->regmap_short, REG_PANIDH, panidh);
+		regmap_write(devrec->regmap_short, REG_PANIDL, panidl);
+
+		dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		/* Pan Coordinator */
+		u8 val;
+		int ret;
+
+		if (filt->pan_coord)
+			val = BIT_PANCOORD;
+		else
+			val = 0;
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PANCOORD, val);
+		if (ret)
+			return ret;
+
+		/* REG_SLOTTED is maintained as default (unslotted/CSMA-CA).
+		 * REG_ORDER is maintained as default (no beacon/superframe).
+		 */
+
+		dev_dbg(printdev(devrec), "Set Pan Coord to %s\n",
+			filt->pan_coord ? "on" : "off");
+	}
+
+	return 0;
+}
+
+static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec)
+{
+	int ret;
+
+	/* Turn back on reception of packets off the air. */
+	devrec->rx_msg.complete = NULL;
+	devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+	devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */
+	ret = spi_async(devrec->spi, &devrec->rx_msg);
+	if (ret)
+		dev_err(printdev(devrec), "failed to unlock rx buffer\n");
+}
+
+static void mrf24j40_handle_rx_read_buf_complete(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u8 len = devrec->rx_buf[2];
+	u8 rx_local_buf[RX_FIFO_SIZE];
+	struct sk_buff *skb;
+
+	memcpy(rx_local_buf, devrec->rx_fifo_buf, len);
+	mrf24j40_handle_rx_read_buf_unlock(devrec);
+
+	skb = dev_alloc_skb(IEEE802154_MTU);
+	if (!skb) {
+		dev_err(printdev(devrec), "failed to allocate skb\n");
+		return;
+	}
+
+	skb_put_data(skb, rx_local_buf, len);
+	ieee802154_rx_irqsafe(devrec->hw, skb, 0);
+
+#ifdef DEBUG
+	 print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			rx_local_buf, len, 0);
+	 pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
+		  devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]);
+#endif
+}
+
+static void mrf24j40_handle_rx_read_buf(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u16 cmd;
+	int ret;
+
+	/* if length is invalid read the full MTU */
+	if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2]))
+		devrec->rx_buf[2] = IEEE802154_MTU;
+
+	cmd = MRF24J40_READLONG(REG_RX_FIFO + 1);
+	devrec->rx_addr_buf[0] = cmd >> 8 & 0xff;
+	devrec->rx_addr_buf[1] = cmd & 0xff;
+	devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2];
+	ret = spi_async(devrec->spi, &devrec->rx_buf_msg);
+	if (ret) {
+		dev_err(printdev(devrec), "failed to read rx buffer\n");
+		mrf24j40_handle_rx_read_buf_unlock(devrec);
+	}
+}
+
+static void mrf24j40_handle_rx_read_len(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u16 cmd;
+	int ret;
+
+	/* read the length of received frame */
+	devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf;
+	devrec->rx_trx.len = 3;
+	cmd = MRF24J40_READLONG(REG_RX_FIFO);
+	devrec->rx_buf[0] = cmd >> 8 & 0xff;
+	devrec->rx_buf[1] = cmd & 0xff;
+
+	ret = spi_async(devrec->spi, &devrec->rx_msg);
+	if (ret) {
+		dev_err(printdev(devrec), "failed to read rx buffer length\n");
+		mrf24j40_handle_rx_read_buf_unlock(devrec);
+	}
+}
+
+static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
+{
+	/* Turn off reception of packets off the air. This prevents the
+	 * device from overwriting the buffer while we're reading it.
+	 */
+	devrec->rx_msg.complete = mrf24j40_handle_rx_read_len;
+	devrec->rx_trx.len = 2;
+	devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+	devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */
+
+	return spi_async(devrec->spi, &devrec->rx_msg);
+}
+
+static int
+mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
+		     u8 retries)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+
+	/* min_be */
+	val = min_be << TXMCR_MIN_BE_SHIFT;
+	/* csma backoffs */
+	val |= retries << TXMCR_CSMA_RETRIES_SHIFT;
+
+	return regmap_update_bits(devrec->regmap_short, REG_TXMCR,
+				  TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK,
+				  val);
+}
+
+static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw,
+				 const struct wpan_phy_cca *cca)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		val = 2;
+		break;
+	case NL802154_CCA_CARRIER:
+		val = 1;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			val = 3;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(devrec->regmap_short, REG_BBREG2,
+				  BBREG2_CCA_MODE_MASK,
+				  val << BBREG2_CCA_MODE_SHIFT);
+}
+
+/* array for representing ed levels */
+static const s32 mrf24j40_ed_levels[] = {
+	-9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100,
+	-8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100,
+	-7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100,
+	-6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100,
+	-5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100,
+	-4000, -3900, -3800, -3700, -3600, -3500
+};
+
+/* map ed levels to register value */
+static const s32 mrf24j40_ed_levels_map[][2] = {
+	{ -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 },
+	{ -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 },
+	{ -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 },
+	{ -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 },
+	{ -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 },
+	{ -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 },
+	{ -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 },
+	{ -6100, 133 },	{ -6000, 138 }, { -5900, 143 }, { -5800, 148 },
+	{ -5700, 153 }, { -5600, 159 },	{ -5500, 165 }, { -5400, 170 },
+	{ -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 },
+	{ -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 },
+	{ -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 },
+	{ -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 },
+	{ -3700, 253 }, { -3600, 254 }, { -3500, 255 },
+};
+
+static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) {
+		if (mrf24j40_ed_levels_map[i][0] == mbm)
+			return regmap_write(devrec->regmap_short, REG_CCAEDTH,
+					    mrf24j40_ed_levels_map[i][1]);
+	}
+
+	return -EINVAL;
+}
+
+static const s32 mrf24j40ma_powers[] = {
+	0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190,
+	-1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370,
+	-2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630,
+};
+
+static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	s32 small_scale;
+	u8 val;
+
+	if (0 >= mbm && mbm > -1000) {
+		val = TXPWRL_0 << TXPWRL_SHIFT;
+		small_scale = mbm;
+	} else if (-1000 >= mbm && mbm > -2000) {
+		val = TXPWRL_10 << TXPWRL_SHIFT;
+		small_scale = mbm + 1000;
+	} else if (-2000 >= mbm && mbm > -3000) {
+		val = TXPWRL_20 << TXPWRL_SHIFT;
+		small_scale = mbm + 2000;
+	} else if (-3000 >= mbm && mbm > -4000) {
+		val = TXPWRL_30 << TXPWRL_SHIFT;
+		small_scale = mbm + 3000;
+	} else {
+		return -EINVAL;
+	}
+
+	switch (small_scale) {
+	case 0:
+		val |= (TXPWRS_0 << TXPWRS_SHIFT);
+		break;
+	case -50:
+		val |= (TXPWRS_0_5 << TXPWRS_SHIFT);
+		break;
+	case -120:
+		val |= (TXPWRS_1_2 << TXPWRS_SHIFT);
+		break;
+	case -190:
+		val |= (TXPWRS_1_9 << TXPWRS_SHIFT);
+		break;
+	case -280:
+		val |= (TXPWRS_2_8 << TXPWRS_SHIFT);
+		break;
+	case -370:
+		val |= (TXPWRS_3_7 << TXPWRS_SHIFT);
+		break;
+	case -490:
+		val |= (TXPWRS_4_9 << TXPWRS_SHIFT);
+		break;
+	case -630:
+		val |= (TXPWRS_6_3 << TXPWRS_SHIFT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(devrec->regmap_long, REG_RFCON3,
+				  TXPWRL_MASK | TXPWRS_MASK, val);
+}
+
+static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	int ret;
+
+	if (on) {
+		/* set PROMI, ERRPKT and NOACKRSP */
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP);
+	} else {
+		/* clear PROMI, ERRPKT and NOACKRSP */
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+					 0);
+	}
+
+	return ret;
+}
+
+static const struct ieee802154_ops mrf24j40_ops = {
+	.owner = THIS_MODULE,
+	.xmit_async = mrf24j40_tx,
+	.ed = mrf24j40_ed,
+	.start = mrf24j40_start,
+	.stop = mrf24j40_stop,
+	.set_channel = mrf24j40_set_channel,
+	.set_hw_addr_filt = mrf24j40_filter,
+	.set_csma_params = mrf24j40_csma_params,
+	.set_cca_mode = mrf24j40_set_cca_mode,
+	.set_cca_ed_level = mrf24j40_set_cca_ed_level,
+	.set_txpower = mrf24j40_set_txpower,
+	.set_promiscuous_mode = mrf24j40_set_promiscuous_mode,
+};
+
+static void mrf24j40_intstat_complete(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u8 intstat = devrec->irq_buf[1];
+
+	enable_irq(devrec->spi->irq);
+
+	/* Ignore Rx security decryption */
+	if (intstat & BIT_SECIF)
+		regmap_write_async(devrec->regmap_short, REG_SECCON0,
+				   BIT_SECIGNORE);
+
+	/* Check for TX complete */
+	if (intstat & BIT_TXNIF)
+		ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false);
+
+	/* Check for Rx */
+	if (intstat & BIT_RXIF)
+		mrf24j40_handle_rx(devrec);
+}
+
+static irqreturn_t mrf24j40_isr(int irq, void *data)
+{
+	struct mrf24j40 *devrec = data;
+	int ret;
+
+	disable_irq_nosync(irq);
+
+	devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT);
+	devrec->irq_buf[1] = 0;
+
+	/* Read the interrupt status */
+	ret = spi_async(devrec->spi, &devrec->irq_msg);
+	if (ret) {
+		enable_irq(irq);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mrf24j40_hw_init(struct mrf24j40 *devrec)
+{
+	u32 irq_type;
+	int ret;
+
+	/* Initialize the device.
+		From datasheet section 3.2: Initialization. */
+	ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0);
+	if (ret)
+		goto err_ret;
+
+	udelay(192);
+
+	/* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
+	ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00);
+	if (ret)
+		goto err_ret;
+
+	if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) {
+		/* Enable external amplifier.
+		 * From MRF24J40MC datasheet section 1.3: Operation.
+		 */
+		regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07,
+				   0x07);
+
+		/* Set GPIO3 as output. */
+		regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08,
+				   0x08);
+
+		/* Set GPIO3 HIGH to enable U5 voltage regulator */
+		regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08);
+
+		/* Reduce TX pwr to meet FCC requirements.
+		 * From MRF24J40MC datasheet section 3.1.1
+		 */
+		regmap_write(devrec->regmap_long, REG_RFCON3, 0x28);
+	}
+
+	irq_type = irq_get_trigger_type(devrec->spi->irq);
+	if (irq_type == IRQ_TYPE_EDGE_RISING ||
+	    irq_type == IRQ_TYPE_EDGE_FALLING)
+		dev_warn(&devrec->spi->dev,
+			 "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n");
+	switch (irq_type) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		/* set interrupt polarity to rising */
+		ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0,
+					 BIT_INTEDGE, BIT_INTEDGE);
+		if (ret)
+			goto err_ret;
+		break;
+	default:
+		/* default is falling edge */
+		break;
+	}
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static void
+mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->tx_msg);
+	devrec->tx_msg.context = devrec;
+	devrec->tx_msg.complete = write_tx_buf_complete;
+	devrec->tx_hdr_trx.len = 2;
+	devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf;
+	spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg);
+	devrec->tx_len_trx.len = 2;
+	devrec->tx_len_trx.tx_buf = devrec->tx_len_buf;
+	spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg);
+	spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg);
+
+	spi_message_init(&devrec->tx_post_msg);
+	devrec->tx_post_msg.context = devrec;
+	devrec->tx_post_trx.len = 2;
+	devrec->tx_post_trx.tx_buf = devrec->tx_post_buf;
+	spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg);
+}
+
+static void
+mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->rx_msg);
+	devrec->rx_msg.context = devrec;
+	devrec->rx_trx.len = 2;
+	devrec->rx_trx.tx_buf = devrec->rx_buf;
+	devrec->rx_trx.rx_buf = devrec->rx_buf;
+	spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg);
+
+	spi_message_init(&devrec->rx_buf_msg);
+	devrec->rx_buf_msg.context = devrec;
+	devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete;
+	devrec->rx_addr_trx.len = 2;
+	devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf;
+	spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg);
+	devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf;
+	spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg);
+	devrec->rx_lqi_trx.len = 2;
+	devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf;
+	spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg);
+}
+
+static void
+mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->irq_msg);
+	devrec->irq_msg.context = devrec;
+	devrec->irq_msg.complete = mrf24j40_intstat_complete;
+	devrec->irq_trx.len = 2;
+	devrec->irq_trx.tx_buf = devrec->irq_buf;
+	devrec->irq_trx.rx_buf = devrec->irq_buf;
+	spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg);
+}
+
+static void  mrf24j40_phy_setup(struct mrf24j40 *devrec)
+{
+	ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr);
+	devrec->hw->phy->current_channel = 11;
+
+	/* mrf24j40 supports max_minbe 0 - 3 */
+	devrec->hw->phy->supported.max_minbe = 3;
+	/* datasheet doesn't say anything about max_be, but we have min_be
+	 * So we assume the max_be default.
+	 */
+	devrec->hw->phy->supported.min_maxbe = 5;
+	devrec->hw->phy->supported.max_maxbe = 5;
+
+	devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER;
+	devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+					       BIT(NL802154_CCA_CARRIER) |
+					       BIT(NL802154_CCA_ENERGY_CARRIER);
+	devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND);
+
+	devrec->hw->phy->cca_ed_level = -6900;
+	devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels;
+	devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels);
+
+	switch (spi_get_device_id(devrec->spi)->driver_data) {
+	case MRF24J40:
+	case MRF24J40MA:
+		devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers;
+		devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers);
+		devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER;
+		break;
+	default:
+		break;
+	}
+}
+
+static int mrf24j40_probe(struct spi_device *spi)
+{
+	int ret = -ENOMEM, irq_type;
+	struct ieee802154_hw *hw;
+	struct mrf24j40 *devrec;
+
+	dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq);
+
+	/* Register with the 802154 subsystem */
+
+	hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops);
+	if (!hw)
+		goto err_ret;
+
+	devrec = hw->priv;
+	devrec->spi = spi;
+	spi_set_drvdata(spi, devrec);
+	devrec->hw = hw;
+	devrec->hw->parent = &spi->dev;
+	devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
+	devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+			    IEEE802154_HW_CSMA_PARAMS |
+			    IEEE802154_HW_PROMISCUOUS;
+
+	devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE |
+				 WPAN_PHY_FLAG_CCA_ED_LEVEL;
+
+	mrf24j40_setup_tx_spi_messages(devrec);
+	mrf24j40_setup_rx_spi_messages(devrec);
+	mrf24j40_setup_irq_spi_messages(devrec);
+
+	devrec->regmap_short = devm_regmap_init_spi(spi,
+						    &mrf24j40_short_regmap);
+	if (IS_ERR(devrec->regmap_short)) {
+		ret = PTR_ERR(devrec->regmap_short);
+		dev_err(&spi->dev, "Failed to allocate short register map: %d\n",
+			ret);
+		goto err_register_device;
+	}
+
+	devrec->regmap_long = devm_regmap_init(&spi->dev,
+					       &mrf24j40_long_regmap_bus,
+					       spi, &mrf24j40_long_regmap);
+	if (IS_ERR(devrec->regmap_long)) {
+		ret = PTR_ERR(devrec->regmap_long);
+		dev_err(&spi->dev, "Failed to allocate long register map: %d\n",
+			ret);
+		goto err_register_device;
+	}
+
+	if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) {
+		dev_warn(&spi->dev, "spi clock above possible maximum: %d",
+			 MAX_SPI_SPEED_HZ);
+		ret = -EINVAL;
+		goto err_register_device;
+	}
+
+	ret = mrf24j40_hw_init(devrec);
+	if (ret)
+		goto err_register_device;
+
+	mrf24j40_phy_setup(devrec);
+
+	/* request IRQF_TRIGGER_LOW as fallback default */
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_LOW;
+
+	ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr,
+			       irq_type, dev_name(&spi->dev), devrec);
+	if (ret) {
+		dev_err(printdev(devrec), "Unable to get IRQ");
+		goto err_register_device;
+	}
+
+	dev_dbg(printdev(devrec), "registered mrf24j40\n");
+	ret = ieee802154_register_hw(devrec->hw);
+	if (ret)
+		goto err_register_device;
+
+	return 0;
+
+err_register_device:
+	ieee802154_free_hw(devrec->hw);
+err_ret:
+	return ret;
+}
+
+static void mrf24j40_remove(struct spi_device *spi)
+{
+	struct mrf24j40 *devrec = spi_get_drvdata(spi);
+
+	dev_dbg(printdev(devrec), "remove\n");
+
+	ieee802154_unregister_hw(devrec->hw);
+	ieee802154_free_hw(devrec->hw);
+	/* TODO: Will ieee802154_free_device() wait until ->xmit() is
+	 * complete? */
+}
+
+static const struct of_device_id mrf24j40_of_match[] = {
+	{ .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 },
+	{ .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA },
+	{ .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mrf24j40_of_match);
+
+static const struct spi_device_id mrf24j40_ids[] = {
+	{ "mrf24j40", MRF24J40 },
+	{ "mrf24j40ma", MRF24J40MA },
+	{ "mrf24j40mc", MRF24J40MC },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
+
+static struct spi_driver mrf24j40_driver = {
+	.driver = {
+		.of_match_table = mrf24j40_of_match,
+		.name = "mrf24j40",
+	},
+	.id_table = mrf24j40_ids,
+	.probe = mrf24j40_probe,
+	.remove = mrf24j40_remove,
+};
+
+module_spi_driver(mrf24j40_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alan Ott");
+MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver");