Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 281 insertions, 0 deletions

diff --git a/drivers/net/ipa/gsi.h b/drivers/net/ipa/gsi.h
new file mode 100644
index 000000000..42063b227
--- /dev/null
+++ b/drivers/net/ipa/gsi.h
@@ -0,0 +1,281 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2018-2023 Linaro Ltd.
+ */
+#ifndef _GSI_H_
+#define _GSI_H_
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+
+#include "ipa_version.h"
+
+/* Maximum number of channels and event rings supported by the driver */
+#define GSI_CHANNEL_COUNT_MAX	28
+#define GSI_EVT_RING_COUNT_MAX	28
+
+/* Maximum TLV FIFO size for a channel; 64 here is arbitrary (and high) */
+#define GSI_TLV_MAX		64
+
+struct device;
+struct scatterlist;
+struct platform_device;
+
+struct gsi;
+struct gsi_trans;
+struct gsi_channel_data;
+struct ipa_gsi_endpoint_data;
+
+struct gsi_ring {
+	void *virt;			/* ring array base address */
+	dma_addr_t addr;		/* primarily low 32 bits used */
+	u32 count;			/* number of elements in ring */
+
+	/* The ring index value indicates the next "open" entry in the ring.
+	 *
+	 * A channel ring consists of TRE entries filled by the AP and passed
+	 * to the hardware for processing.  For a channel ring, the ring index
+	 * identifies the next unused entry to be filled by the AP.  In this
+	 * case the initial value is assumed by hardware to be 0.
+	 *
+	 * An event ring consists of event structures filled by the hardware
+	 * and passed to the AP.  For event rings, the ring index identifies
+	 * the next ring entry that is not known to have been filled by the
+	 * hardware.  The initial value used is arbitrary (so we use 0).
+	 */
+	u32 index;
+};
+
+/* Transactions use several resources that can be allocated dynamically
+ * but taken from a fixed-size pool.  The number of elements required for
+ * the pool is limited by the total number of TREs that can be outstanding.
+ *
+ * If sufficient TREs are available to reserve for a transaction,
+ * allocation from these pools is guaranteed to succeed.  Furthermore,
+ * these resources are implicitly freed whenever the TREs in the
+ * transaction they're associated with are released.
+ *
+ * The result of a pool allocation of multiple elements is always
+ * contiguous.
+ */
+struct gsi_trans_pool {
+	void *base;			/* base address of element pool */
+	u32 count;			/* # elements in the pool */
+	u32 free;			/* next free element in pool (modulo) */
+	u32 size;			/* size (bytes) of an element */
+	u32 max_alloc;			/* max allocation request */
+	dma_addr_t addr;		/* DMA address if DMA pool (or 0) */
+};
+
+struct gsi_trans_info {
+	atomic_t tre_avail;		/* TREs available for allocation */
+
+	u16 free_id;			/* first free trans in array */
+	u16 allocated_id;		/* first allocated transaction */
+	u16 committed_id;		/* first committed transaction */
+	u16 pending_id;			/* first pending transaction */
+	u16 completed_id;		/* first completed transaction */
+	u16 polled_id;			/* first polled transaction */
+	struct gsi_trans *trans;	/* transaction array */
+	struct gsi_trans **map;		/* TRE -> transaction map */
+
+	struct gsi_trans_pool sg_pool;	/* scatterlist pool */
+	struct gsi_trans_pool cmd_pool;	/* command payload DMA pool */
+};
+
+/* Hardware values signifying the state of a channel */
+enum gsi_channel_state {
+	GSI_CHANNEL_STATE_NOT_ALLOCATED		= 0x0,
+	GSI_CHANNEL_STATE_ALLOCATED		= 0x1,
+	GSI_CHANNEL_STATE_STARTED		= 0x2,
+	GSI_CHANNEL_STATE_STOPPED		= 0x3,
+	GSI_CHANNEL_STATE_STOP_IN_PROC		= 0x4,
+	GSI_CHANNEL_STATE_FLOW_CONTROLLED	= 0x5,	/* IPA v4.2-v4.9 */
+	GSI_CHANNEL_STATE_ERROR			= 0xf,
+};
+
+/* We only care about channels between IPA and AP */
+struct gsi_channel {
+	struct gsi *gsi;
+	bool toward_ipa;
+	bool command;			/* AP command TX channel or not */
+
+	u8 trans_tre_max;		/* max TREs in a transaction */
+	u16 tre_count;
+	u16 event_count;
+
+	struct gsi_ring tre_ring;
+	u32 evt_ring_id;
+
+	/* The following counts are used only for TX endpoints */
+	u64 byte_count;			/* total # bytes transferred */
+	u64 trans_count;		/* total # transactions */
+	u64 queued_byte_count;		/* last reported queued byte count */
+	u64 queued_trans_count;		/* ...and queued trans count */
+	u64 compl_byte_count;		/* last reported completed byte count */
+	u64 compl_trans_count;		/* ...and completed trans count */
+
+	struct gsi_trans_info trans_info;
+
+	struct napi_struct napi;
+};
+
+/* Hardware values signifying the state of an event ring */
+enum gsi_evt_ring_state {
+	GSI_EVT_RING_STATE_NOT_ALLOCATED	= 0x0,
+	GSI_EVT_RING_STATE_ALLOCATED		= 0x1,
+	GSI_EVT_RING_STATE_ERROR		= 0xf,
+};
+
+struct gsi_evt_ring {
+	struct gsi_channel *channel;
+	struct gsi_ring ring;
+};
+
+struct gsi {
+	struct device *dev;		/* Same as IPA device */
+	enum ipa_version version;
+	void __iomem *virt;		/* I/O mapped registers */
+	const struct regs *regs;
+
+	u32 irq;
+	u32 channel_count;
+	u32 evt_ring_count;
+	u32 event_bitmap;		/* allocated event rings */
+	u32 modem_channel_bitmap;	/* modem channels to allocate */
+	u32 type_enabled_bitmap;	/* GSI IRQ types enabled */
+	u32 ieob_enabled_bitmap;	/* IEOB IRQ enabled (event rings) */
+	int result;			/* Negative errno (generic commands) */
+	struct completion completion;	/* Signals GSI command completion */
+	struct mutex mutex;		/* protects commands, programming */
+	struct gsi_channel channel[GSI_CHANNEL_COUNT_MAX];
+	struct gsi_evt_ring evt_ring[GSI_EVT_RING_COUNT_MAX];
+	struct net_device dummy_dev;	/* needed for NAPI */
+};
+
+/**
+ * gsi_setup() - Set up the GSI subsystem
+ * @gsi:	Address of GSI structure embedded in an IPA structure
+ *
+ * Return:	0 if successful, or a negative error code
+ *
+ * Performs initialization that must wait until the GSI hardware is
+ * ready (including firmware loaded).
+ */
+int gsi_setup(struct gsi *gsi);
+
+/**
+ * gsi_teardown() - Tear down GSI subsystem
+ * @gsi:	GSI address previously passed to a successful gsi_setup() call
+ */
+void gsi_teardown(struct gsi *gsi);
+
+/**
+ * gsi_channel_tre_max() - Channel maximum number of in-flight TREs
+ * @gsi:	GSI pointer
+ * @channel_id:	Channel whose limit is to be returned
+ *
+ * Return:	 The maximum number of TREs outstanding on the channel
+ */
+u32 gsi_channel_tre_max(struct gsi *gsi, u32 channel_id);
+
+/**
+ * gsi_channel_start() - Start an allocated GSI channel
+ * @gsi:	GSI pointer
+ * @channel_id:	Channel to start
+ *
+ * Return:	0 if successful, or a negative error code
+ */
+int gsi_channel_start(struct gsi *gsi, u32 channel_id);
+
+/**
+ * gsi_channel_stop() - Stop a started GSI channel
+ * @gsi:	GSI pointer returned by gsi_setup()
+ * @channel_id:	Channel to stop
+ *
+ * Return:	0 if successful, or a negative error code
+ */
+int gsi_channel_stop(struct gsi *gsi, u32 channel_id);
+
+/**
+ * gsi_modem_channel_flow_control() - Set channel flow control state (IPA v4.2+)
+ * @gsi:	GSI pointer returned by gsi_setup()
+ * @channel_id:	Modem TX channel to control
+ * @enable:	Whether to enable flow control (i.e., prevent flow)
+ */
+void gsi_modem_channel_flow_control(struct gsi *gsi, u32 channel_id,
+				    bool enable);
+
+/**
+ * gsi_channel_reset() - Reset an allocated GSI channel
+ * @gsi:	GSI pointer
+ * @channel_id:	Channel to be reset
+ * @doorbell:	Whether to (possibly) enable the doorbell engine
+ *
+ * Reset a channel and reconfigure it.  The @doorbell flag indicates
+ * that the doorbell engine should be enabled if needed.
+ *
+ * GSI hardware relinquishes ownership of all pending receive buffer
+ * transactions and they will complete with their cancelled flag set.
+ */
+void gsi_channel_reset(struct gsi *gsi, u32 channel_id, bool doorbell);
+
+/**
+ * gsi_suspend() - Prepare the GSI subsystem for suspend
+ * @gsi:	GSI pointer
+ */
+void gsi_suspend(struct gsi *gsi);
+
+/**
+ * gsi_resume() - Resume the GSI subsystem following suspend
+ * @gsi:	GSI pointer
+ */
+void gsi_resume(struct gsi *gsi);
+
+/**
+ * gsi_channel_suspend() - Suspend a GSI channel
+ * @gsi:	GSI pointer
+ * @channel_id:	Channel to suspend
+ *
+ * For IPA v4.0+, suspend is implemented by stopping the channel.
+ */
+int gsi_channel_suspend(struct gsi *gsi, u32 channel_id);
+
+/**
+ * gsi_channel_resume() - Resume a suspended GSI channel
+ * @gsi:	GSI pointer
+ * @channel_id:	Channel to resume
+ *
+ * For IPA v4.0+, the stopped channel is started again.
+ */
+int gsi_channel_resume(struct gsi *gsi, u32 channel_id);
+
+/**
+ * gsi_init() - Initialize the GSI subsystem
+ * @gsi:	Address of GSI structure embedded in an IPA structure
+ * @pdev:	IPA platform device
+ * @version:	IPA hardware version (implies GSI version)
+ * @count:	Number of entries in the configuration data array
+ * @data:	Endpoint and channel configuration data
+ *
+ * Return:	0 if successful, or a negative error code
+ *
+ * Early stage initialization of the GSI subsystem, performing tasks
+ * that can be done before the GSI hardware is ready to use.
+ */
+int gsi_init(struct gsi *gsi, struct platform_device *pdev,
+	     enum ipa_version version, u32 count,
+	     const struct ipa_gsi_endpoint_data *data);
+
+/**
+ * gsi_exit() - Exit the GSI subsystem
+ * @gsi:	GSI address previously passed to a successful gsi_init() call
+ */
+void gsi_exit(struct gsi *gsi);
+
+#endif /* _GSI_H_ */