Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1307 insertions, 0 deletions

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
new file mode 100644
index 000000000..04b2e6eeb
--- /dev/null
+++ b/drivers/net/phy/broadcom.c
@@ -0,0 +1,1307 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	drivers/net/phy/broadcom.c
+ *
+ *	Broadcom BCM5411, BCM5421 and BCM5461 Gigabit Ethernet
+ *	transceivers.
+ *
+ *	Copyright (c) 2006  Maciej W. Rozycki
+ *
+ *	Inspired by code written by Amy Fong.
+ */
+
+#include "bcm-phy-lib.h"
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/pm_wakeup.h>
+#include <linux/brcmphy.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
+
+#define BRCM_PHY_MODEL(phydev) \
+	((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
+
+#define BRCM_PHY_REV(phydev) \
+	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
+
+MODULE_DESCRIPTION("Broadcom PHY driver");
+MODULE_AUTHOR("Maciej W. Rozycki");
+MODULE_LICENSE("GPL");
+
+struct bcm54xx_phy_priv {
+	u64	*stats;
+	struct bcm_ptp_private *ptp;
+	int	wake_irq;
+	bool	wake_irq_enabled;
+};
+
+static bool bcm54xx_phy_can_wakeup(struct phy_device *phydev)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+
+	return phy_interrupt_is_valid(phydev) || priv->wake_irq >= 0;
+}
+
+static int bcm54xx_config_clock_delay(struct phy_device *phydev)
+{
+	int rc, val;
+
+	/* handling PHY's internal RX clock delay */
+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		/* Disable RGMII RXC-RXD skew */
+		val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+	}
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		/* Enable RGMII RXC-RXD skew */
+		val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+	}
+	rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				  val);
+	if (rc < 0)
+		return rc;
+
+	/* handling PHY's internal TX clock delay */
+	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		/* Disable internal TX clock delay */
+		val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+	}
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		/* Enable internal TX clock delay */
+		val |= BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+	}
+	rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int bcm54210e_config_init(struct phy_device *phydev)
+{
+	int val;
+
+	bcm54xx_config_clock_delay(phydev);
+
+	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
+		val = phy_read(phydev, MII_CTRL1000);
+		val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
+		phy_write(phydev, MII_CTRL1000, val);
+	}
+
+	return 0;
+}
+
+static int bcm54612e_config_init(struct phy_device *phydev)
+{
+	int reg;
+
+	bcm54xx_config_clock_delay(phydev);
+
+	/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+	if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+		int err;
+
+		reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+		err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+					BCM54612E_LED4_CLK125OUT_EN | reg);
+
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int bcm54616s_config_init(struct phy_device *phydev)
+{
+	int rc, val;
+
+	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+	    phydev->interface != PHY_INTERFACE_MODE_1000BASEX)
+		return 0;
+
+	/* Ensure proper interface mode is selected. */
+	/* Disable RGMII mode */
+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (val < 0)
+		return val;
+	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN;
+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+	rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				  val);
+	if (rc < 0)
+		return rc;
+
+	/* Select 1000BASE-X register set (primary SerDes) */
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE);
+	if (val < 0)
+		return val;
+	val |= BCM54XX_SHD_MODE_1000BX;
+	rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+	if (rc < 0)
+		return rc;
+
+	/* Power down SerDes interface */
+	rc = phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
+	if (rc < 0)
+		return rc;
+
+	/* Select proper interface mode */
+	val &= ~BCM54XX_SHD_INTF_SEL_MASK;
+	val |= phydev->interface == PHY_INTERFACE_MODE_SGMII ?
+		BCM54XX_SHD_INTF_SEL_SGMII :
+		BCM54XX_SHD_INTF_SEL_GBIC;
+	rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+	if (rc < 0)
+		return rc;
+
+	/* Power up SerDes interface */
+	rc = phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+	if (rc < 0)
+		return rc;
+
+	/* Select copper register set */
+	val &= ~BCM54XX_SHD_MODE_1000BX;
+	rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+	if (rc < 0)
+		return rc;
+
+	/* Power up copper interface */
+	return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+}
+
+/* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
+static int bcm50610_a0_workaround(struct phy_device *phydev)
+{
+	int err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH0,
+				MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
+				MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH3,
+				MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75,
+				MII_BCM54XX_EXP_EXP75_VDACCTRL);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP96,
+				MII_BCM54XX_EXP_EXP96_MYST);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP97,
+				MII_BCM54XX_EXP_EXP97_MYST);
+
+	return err;
+}
+
+static int bcm54xx_phydsp_config(struct phy_device *phydev)
+{
+	int err, err2;
+
+	/* Enable the SMDSP clock */
+	err = bcm54xx_auxctl_write(phydev,
+				   MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				   MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
+				   MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+	if (err < 0)
+		return err;
+
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	    BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
+		/* Clear bit 9 to fix a phy interop issue. */
+		err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08,
+					MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
+		if (err < 0)
+			goto error;
+
+		if (phydev->drv->phy_id == PHY_ID_BCM50610) {
+			err = bcm50610_a0_workaround(phydev);
+			if (err < 0)
+				goto error;
+		}
+	}
+
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
+		int val;
+
+		val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75);
+		if (val < 0)
+			goto error;
+
+		val |= MII_BCM54XX_EXP_EXP75_CM_OSC;
+		err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, val);
+	}
+
+error:
+	/* Disable the SMDSP clock */
+	err2 = bcm54xx_auxctl_write(phydev,
+				    MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				    MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+
+	/* Return the first error reported. */
+	return err ? err : err2;
+}
+
+static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
+{
+	u32 orig;
+	int val;
+	bool clk125en = true;
+
+	/* Abort if we are using an untested phy. */
+	if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54210E &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811)
+		return;
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    BRCM_PHY_REV(phydev) >= 0x3) {
+		/*
+		 * Here, bit 0 _disables_ CLK125 when set.
+		 * This bit is set by default.
+		 */
+		clk125en = false;
+	} else {
+		if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
+			if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811) {
+				/* Here, bit 0 _enables_ CLK125 when set */
+				val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
+			}
+			clk125en = false;
+		}
+	}
+
+	if (!clk125en || (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS;
+	else
+		val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+
+	if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) {
+		if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E ||
+		    BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
+		    BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
+			val |= BCM54XX_SHD_SCR3_RXCTXC_DIS;
+		else
+			val |= BCM54XX_SHD_SCR3_TRDDAPD;
+	}
+
+	if (orig != val)
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if (!clk125en || (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val |= BCM54XX_SHD_APD_EN;
+	else
+		val &= ~BCM54XX_SHD_APD_EN;
+
+	if (orig != val)
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
+}
+
+static void bcm54xx_ptp_stop(struct phy_device *phydev)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+
+	if (priv->ptp)
+		bcm_ptp_stop(priv->ptp);
+}
+
+static void bcm54xx_ptp_config_init(struct phy_device *phydev)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+
+	if (priv->ptp)
+		bcm_ptp_config_init(phydev);
+}
+
+static int bcm54xx_config_init(struct phy_device *phydev)
+{
+	int reg, err, val;
+
+	reg = phy_read(phydev, MII_BCM54XX_ECR);
+	if (reg < 0)
+		return reg;
+
+	/* Mask interrupts globally.  */
+	reg |= MII_BCM54XX_ECR_IM;
+	err = phy_write(phydev, MII_BCM54XX_ECR, reg);
+	if (err < 0)
+		return err;
+
+	/* Unmask events we are interested in.  */
+	reg = ~(MII_BCM54XX_INT_DUPLEX |
+		MII_BCM54XX_INT_SPEED |
+		MII_BCM54XX_INT_LINK);
+	err = phy_write(phydev, MII_BCM54XX_IMR, reg);
+	if (err < 0)
+		return err;
+
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+
+	bcm54xx_adjust_rxrefclk(phydev);
+
+	switch (BRCM_PHY_MODEL(phydev)) {
+	case PHY_ID_BCM50610:
+	case PHY_ID_BCM50610M:
+		err = bcm54xx_config_clock_delay(phydev);
+		break;
+	case PHY_ID_BCM54210E:
+		err = bcm54210e_config_init(phydev);
+		break;
+	case PHY_ID_BCM54612E:
+		err = bcm54612e_config_init(phydev);
+		break;
+	case PHY_ID_BCM54616S:
+		err = bcm54616s_config_init(phydev);
+		break;
+	case PHY_ID_BCM54810:
+		/* For BCM54810, we need to disable BroadR-Reach function */
+		val = bcm_phy_read_exp(phydev,
+				       BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
+		val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
+		err = bcm_phy_write_exp(phydev,
+					BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
+					val);
+		break;
+	}
+	if (err)
+		return err;
+
+	bcm54xx_phydsp_config(phydev);
+
+	/* For non-SFP setups, encode link speed into LED1 and LED3 pair
+	 * (green/amber).
+	 * Also flash these two LEDs on activity. This means configuring
+	 * them for MULTICOLOR and encoding link/activity into them.
+	 * Don't do this for devices on an SFP module, since some of these
+	 * use the LED outputs to control the SFP LOS signal, and changing
+	 * these settings will cause LOS to malfunction.
+	 */
+	if (!phy_on_sfp(phydev)) {
+		val = BCM54XX_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
+			BCM54XX_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDS1, val);
+
+		val = BCM_LED_MULTICOLOR_IN_PHASE |
+			BCM54XX_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
+			BCM54XX_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
+		bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
+	}
+
+	bcm54xx_ptp_config_init(phydev);
+
+	/* Acknowledge any left over interrupt and charge the device for
+	 * wake-up.
+	 */
+	err = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+	if (err < 0)
+		return err;
+
+	if (err)
+		pm_wakeup_event(&phydev->mdio.dev, 0);
+
+	return 0;
+}
+
+static int bcm54xx_iddq_set(struct phy_device *phydev, bool enable)
+{
+	int ret = 0;
+
+	if (!(phydev->dev_flags & PHY_BRCM_IDDQ_SUSPEND))
+		return ret;
+
+	ret = bcm_phy_read_exp(phydev, BCM54XX_TOP_MISC_IDDQ_CTRL);
+	if (ret < 0)
+		goto out;
+
+	if (enable)
+		ret |= BCM54XX_TOP_MISC_IDDQ_SR | BCM54XX_TOP_MISC_IDDQ_LP;
+	else
+		ret &= ~(BCM54XX_TOP_MISC_IDDQ_SR | BCM54XX_TOP_MISC_IDDQ_LP);
+
+	ret = bcm_phy_write_exp(phydev, BCM54XX_TOP_MISC_IDDQ_CTRL, ret);
+out:
+	return ret;
+}
+
+static int bcm54xx_set_wakeup_irq(struct phy_device *phydev, bool state)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+	int ret = 0;
+
+	if (!bcm54xx_phy_can_wakeup(phydev))
+		return ret;
+
+	if (priv->wake_irq_enabled != state) {
+		if (state)
+			ret = enable_irq_wake(priv->wake_irq);
+		else
+			ret = disable_irq_wake(priv->wake_irq);
+		priv->wake_irq_enabled = state;
+	}
+
+	return ret;
+}
+
+static int bcm54xx_suspend(struct phy_device *phydev)
+{
+	int ret = 0;
+
+	bcm54xx_ptp_stop(phydev);
+
+	/* Acknowledge any Wake-on-LAN interrupt prior to suspend */
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->wol_enabled)
+		return bcm54xx_set_wakeup_irq(phydev, true);
+
+	/* We cannot use a read/modify/write here otherwise the PHY gets into
+	 * a bad state where its LEDs keep flashing, thus defeating the purpose
+	 * of low power mode.
+	 */
+	ret = phy_write(phydev, MII_BMCR, BMCR_PDOWN);
+	if (ret < 0)
+		return ret;
+
+	return bcm54xx_iddq_set(phydev, true);
+}
+
+static int bcm54xx_resume(struct phy_device *phydev)
+{
+	int ret = 0;
+
+	if (phydev->wol_enabled) {
+		ret = bcm54xx_set_wakeup_irq(phydev, false);
+		if (ret)
+			return ret;
+	}
+
+	ret = bcm54xx_iddq_set(phydev, false);
+	if (ret < 0)
+		return ret;
+
+	/* Writes to register other than BMCR would be ignored
+	 * unless we clear the PDOWN bit first
+	 */
+	ret = genphy_resume(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* Upon exiting power down, the PHY remains in an internal reset state
+	 * for 40us
+	 */
+	fsleep(40);
+
+	/* Issue a soft reset after clearing the power down bit
+	 * and before doing any other configuration.
+	 */
+	if (phydev->dev_flags & PHY_BRCM_IDDQ_SUSPEND) {
+		ret = genphy_soft_reset(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	return bcm54xx_config_init(phydev);
+}
+
+static int bcm54810_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
+{
+	return -EOPNOTSUPP;
+}
+
+static int bcm54810_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
+			      u16 val)
+{
+	return -EOPNOTSUPP;
+}
+
+static int bcm54811_config_init(struct phy_device *phydev)
+{
+	int err, reg;
+
+	/* Disable BroadR-Reach function. */
+	reg = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
+	reg &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
+	err = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
+				reg);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_config_init(phydev);
+
+	/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+	if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+		reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+		err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+					BCM54612E_LED4_CLK125OUT_EN | reg);
+		if (err < 0)
+			return err;
+	}
+
+	return err;
+}
+
+static int bcm5481_config_aneg(struct phy_device *phydev)
+{
+	struct device_node *np = phydev->mdio.dev.of_node;
+	int ret;
+
+	/* Aneg firstly. */
+	ret = genphy_config_aneg(phydev);
+
+	/* Then we can set up the delay. */
+	bcm54xx_config_clock_delay(phydev);
+
+	if (of_property_read_bool(np, "enet-phy-lane-swap")) {
+		/* Lane Swap - Undocumented register...magic! */
+		ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9,
+					0x11B);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+struct bcm54616s_phy_priv {
+	bool mode_1000bx_en;
+};
+
+static int bcm54616s_probe(struct phy_device *phydev)
+{
+	struct bcm54616s_phy_priv *priv;
+	int val;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE);
+	if (val < 0)
+		return val;
+
+	/* The PHY is strapped in RGMII-fiber mode when INTERF_SEL[1:0]
+	 * is 01b, and the link between PHY and its link partner can be
+	 * either 1000Base-X or 100Base-FX.
+	 * RGMII-1000Base-X is properly supported, but RGMII-100Base-FX
+	 * support is still missing as of now.
+	 */
+	if ((val & BCM54XX_SHD_INTF_SEL_MASK) == BCM54XX_SHD_INTF_SEL_RGMII) {
+		val = bcm_phy_read_shadow(phydev, BCM54616S_SHD_100FX_CTRL);
+		if (val < 0)
+			return val;
+
+		/* Bit 0 of the SerDes 100-FX Control register, when set
+		 * to 1, sets the MII/RGMII -> 100BASE-FX configuration.
+		 * When this bit is set to 0, it sets the GMII/RGMII ->
+		 * 1000BASE-X configuration.
+		 */
+		if (!(val & BCM54616S_100FX_MODE))
+			priv->mode_1000bx_en = true;
+
+		phydev->port = PORT_FIBRE;
+	}
+
+	return 0;
+}
+
+static int bcm54616s_config_aneg(struct phy_device *phydev)
+{
+	struct bcm54616s_phy_priv *priv = phydev->priv;
+	int ret;
+
+	/* Aneg firstly. */
+	if (priv->mode_1000bx_en)
+		ret = genphy_c37_config_aneg(phydev);
+	else
+		ret = genphy_config_aneg(phydev);
+
+	/* Then we can set up the delay. */
+	bcm54xx_config_clock_delay(phydev);
+
+	return ret;
+}
+
+static int bcm54616s_read_status(struct phy_device *phydev)
+{
+	struct bcm54616s_phy_priv *priv = phydev->priv;
+	int err;
+
+	if (priv->mode_1000bx_en)
+		err = genphy_c37_read_status(phydev);
+	else
+		err = genphy_read_status(phydev);
+
+	return err;
+}
+
+static int brcm_fet_config_init(struct phy_device *phydev)
+{
+	int reg, err, err2, brcmtest;
+
+	/* Reset the PHY to bring it to a known state. */
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	/* The datasheet indicates the PHY needs up to 1us to complete a reset,
+	 * build some slack here.
+	 */
+	usleep_range(1000, 2000);
+
+	/* The PHY requires 65 MDC clock cycles to complete a write operation
+	 * and turnaround the line properly.
+	 *
+	 * We ignore -EIO here as the MDIO controller (e.g.: mdio-bcm-unimac)
+	 * may flag the lack of turn-around as a read failure. This is
+	 * particularly true with this combination since the MDIO controller
+	 * only used 64 MDC cycles. This is not a critical failure in this
+	 * specific case and it has no functional impact otherwise, so we let
+	 * that one go through. If there is a genuine bus error, the next read
+	 * of MII_BRCM_FET_INTREG will error out.
+	 */
+	err = phy_read(phydev, MII_BMCR);
+	if (err < 0 && err != -EIO)
+		return err;
+
+	reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+	if (reg < 0)
+		return reg;
+
+	/* Unmask events we are interested in and mask interrupts globally. */
+	reg = MII_BRCM_FET_IR_DUPLEX_EN |
+	      MII_BRCM_FET_IR_SPEED_EN |
+	      MII_BRCM_FET_IR_LINK_EN |
+	      MII_BRCM_FET_IR_ENABLE |
+	      MII_BRCM_FET_IR_MASK;
+
+	err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+	if (err < 0)
+		return err;
+
+	/* Enable shadow register access */
+	brcmtest = phy_read(phydev, MII_BRCM_FET_BRCMTEST);
+	if (brcmtest < 0)
+		return brcmtest;
+
+	reg = brcmtest | MII_BRCM_FET_BT_SRE;
+
+	err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+	if (err < 0)
+		return err;
+
+	/* Set the LED mode */
+	reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
+	if (reg < 0) {
+		err = reg;
+		goto done;
+	}
+
+	reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
+	reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
+
+	err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
+	if (err < 0)
+		goto done;
+
+	/* Enable auto MDIX */
+	err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
+			   MII_BRCM_FET_SHDW_MC_FAME);
+	if (err < 0)
+		goto done;
+
+	if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
+		/* Enable auto power down */
+		err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+				   MII_BRCM_FET_SHDW_AS2_APDE);
+	}
+
+done:
+	/* Disable shadow register access */
+	err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+	if (!err)
+		err = err2;
+
+	return err;
+}
+
+static int brcm_fet_ack_interrupt(struct phy_device *phydev)
+{
+	int reg;
+
+	/* Clear pending interrupts.  */
+	reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+	if (reg < 0)
+		return reg;
+
+	return 0;
+}
+
+static int brcm_fet_config_intr(struct phy_device *phydev)
+{
+	int reg, err;
+
+	reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+	if (reg < 0)
+		return reg;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = brcm_fet_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		reg &= ~MII_BRCM_FET_IR_MASK;
+		err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+	} else {
+		reg |= MII_BRCM_FET_IR_MASK;
+		err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+		if (err)
+			return err;
+
+		err = brcm_fet_ack_interrupt(phydev);
+	}
+
+	return err;
+}
+
+static irqreturn_t brcm_fet_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, MII_BRCM_FET_INTREG);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (irq_status == 0)
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int brcm_fet_suspend(struct phy_device *phydev)
+{
+	int reg, err, err2, brcmtest;
+
+	/* We cannot use a read/modify/write here otherwise the PHY continues
+	 * to drive LEDs which defeats the purpose of low power mode.
+	 */
+	err = phy_write(phydev, MII_BMCR, BMCR_PDOWN);
+	if (err < 0)
+		return err;
+
+	/* Enable shadow register access */
+	brcmtest = phy_read(phydev, MII_BRCM_FET_BRCMTEST);
+	if (brcmtest < 0)
+		return brcmtest;
+
+	reg = brcmtest | MII_BRCM_FET_BT_SRE;
+
+	err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+	if (err < 0)
+		return err;
+
+	/* Set standby mode */
+	err = phy_modify(phydev, MII_BRCM_FET_SHDW_AUXMODE4,
+			 MII_BRCM_FET_SHDW_AM4_STANDBY,
+			 MII_BRCM_FET_SHDW_AM4_STANDBY);
+
+	/* Disable shadow register access */
+	err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+	if (!err)
+		err = err2;
+
+	return err;
+}
+
+static void bcm54xx_phy_get_wol(struct phy_device *phydev,
+				struct ethtool_wolinfo *wol)
+{
+	/* We cannot wake-up if we do not have a dedicated PHY interrupt line
+	 * or an out of band GPIO descriptor for wake-up. Zeroing
+	 * wol->supported allows the caller (MAC driver) to play through and
+	 * offer its own Wake-on-LAN scheme if available.
+	 */
+	if (!bcm54xx_phy_can_wakeup(phydev)) {
+		wol->supported = 0;
+		return;
+	}
+
+	bcm_phy_get_wol(phydev, wol);
+}
+
+static int bcm54xx_phy_set_wol(struct phy_device *phydev,
+			       struct ethtool_wolinfo *wol)
+{
+	int ret;
+
+	/* We cannot wake-up if we do not have a dedicated PHY interrupt line
+	 * or an out of band GPIO descriptor for wake-up. Returning -EOPNOTSUPP
+	 * allows the caller (MAC driver) to play through and offer its own
+	 * Wake-on-LAN scheme if available.
+	 */
+	if (!bcm54xx_phy_can_wakeup(phydev))
+		return -EOPNOTSUPP;
+
+	ret = bcm_phy_set_wol(phydev, wol);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int bcm54xx_phy_probe(struct phy_device *phydev)
+{
+	struct bcm54xx_phy_priv *priv;
+	struct gpio_desc *wakeup_gpio;
+	int ret = 0;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->wake_irq = -ENXIO;
+
+	phydev->priv = priv;
+
+	priv->stats = devm_kcalloc(&phydev->mdio.dev,
+				   bcm_phy_get_sset_count(phydev), sizeof(u64),
+				   GFP_KERNEL);
+	if (!priv->stats)
+		return -ENOMEM;
+
+	priv->ptp = bcm_ptp_probe(phydev);
+	if (IS_ERR(priv->ptp))
+		return PTR_ERR(priv->ptp);
+
+	/* We cannot utilize the _optional variant here since we want to know
+	 * whether the GPIO descriptor exists or not to advertise Wake-on-LAN
+	 * support or not.
+	 */
+	wakeup_gpio = devm_gpiod_get(&phydev->mdio.dev, "wakeup", GPIOD_IN);
+	if (PTR_ERR(wakeup_gpio) == -EPROBE_DEFER)
+		return PTR_ERR(wakeup_gpio);
+
+	if (!IS_ERR(wakeup_gpio)) {
+		priv->wake_irq = gpiod_to_irq(wakeup_gpio);
+
+		/* Dummy interrupt handler which is not enabled but is provided
+		 * in order for the interrupt descriptor to be fully set-up.
+		 */
+		ret = devm_request_irq(&phydev->mdio.dev, priv->wake_irq,
+				       bcm_phy_wol_isr,
+				       IRQF_TRIGGER_LOW | IRQF_NO_AUTOEN,
+				       dev_name(&phydev->mdio.dev), phydev);
+		if (ret)
+			return ret;
+	}
+
+	/* If we do not have a main interrupt or a side-band wake-up interrupt,
+	 * then the device cannot be marked as wake-up capable.
+	 */
+	if (!bcm54xx_phy_can_wakeup(phydev))
+		return 0;
+
+	return device_init_wakeup(&phydev->mdio.dev, true);
+}
+
+static void bcm54xx_get_stats(struct phy_device *phydev,
+			      struct ethtool_stats *stats, u64 *data)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+
+	bcm_phy_get_stats(phydev, priv->stats, stats, data);
+}
+
+static void bcm54xx_link_change_notify(struct phy_device *phydev)
+{
+	u16 mask = MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE |
+		   MII_BCM54XX_EXP_EXP08_FORCE_DAC_WAKE;
+	int ret;
+
+	if (phydev->state != PHY_RUNNING)
+		return;
+
+	/* Don't change the DAC wake settings if auto power down
+	 * is not requested.
+	 */
+	if (!(phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		return;
+
+	ret = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP08);
+	if (ret < 0)
+		return;
+
+	/* Enable/disable 10BaseT auto and forced early DAC wake depending
+	 * on the negotiated speed, those settings should only be done
+	 * for 10Mbits/sec.
+	 */
+	if (phydev->speed == SPEED_10)
+		ret |= mask;
+	else
+		ret &= ~mask;
+	bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08, ret);
+}
+
+static struct phy_driver broadcom_drivers[] = {
+{
+	.phy_id		= PHY_ID_BCM5411,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5411",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+}, {
+	.phy_id		= PHY_ID_BCM5421,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5421",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+}, {
+	.phy_id		= PHY_ID_BCM54210E,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM54210E",
+	/* PHY_GBIT_FEATURES */
+	.flags		= PHY_ALWAYS_CALL_SUSPEND,
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
+	.get_wol	= bcm54xx_phy_get_wol,
+	.set_wol	= bcm54xx_phy_set_wol,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM5461,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5461",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM54612E,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM54612E",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM54616S,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM54616S",
+	/* PHY_GBIT_FEATURES */
+	.soft_reset     = genphy_soft_reset,
+	.config_init	= bcm54xx_config_init,
+	.config_aneg	= bcm54616s_config_aneg,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.read_status	= bcm54616s_read_status,
+	.probe		= bcm54616s_probe,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM5464,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5464",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM5481,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5481",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_aneg	= bcm5481_config_aneg,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id         = PHY_ID_BCM54810,
+	.phy_id_mask    = 0xfffffff0,
+	.name           = "Broadcom BCM54810",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.read_mmd	= bcm54810_read_mmd,
+	.write_mmd	= bcm54810_write_mmd,
+	.config_init    = bcm54xx_config_init,
+	.config_aneg    = bcm5481_config_aneg,
+	.config_intr    = bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id         = PHY_ID_BCM54811,
+	.phy_id_mask    = 0xfffffff0,
+	.name           = "Broadcom BCM54811",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init    = bcm54811_config_init,
+	.config_aneg    = bcm5481_config_aneg,
+	.config_intr    = bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM5482,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5482",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM50610,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM50610",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM50610M,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM50610M",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM57780,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM57780",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCMAC131,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCMAC131",
+	/* PHY_BASIC_FEATURES */
+	.config_init	= brcm_fet_config_init,
+	.config_intr	= brcm_fet_config_intr,
+	.handle_interrupt = brcm_fet_handle_interrupt,
+	.suspend	= brcm_fet_suspend,
+	.resume		= brcm_fet_config_init,
+}, {
+	.phy_id		= PHY_ID_BCM5241,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5241",
+	/* PHY_BASIC_FEATURES */
+	.config_init	= brcm_fet_config_init,
+	.config_intr	= brcm_fet_config_intr,
+	.handle_interrupt = brcm_fet_handle_interrupt,
+	.suspend	= brcm_fet_suspend,
+	.resume		= brcm_fet_config_init,
+}, {
+	.phy_id		= PHY_ID_BCM5395,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5395",
+	.flags		= PHY_IS_INTERNAL,
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM53125,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM53125",
+	.flags		= PHY_IS_INTERNAL,
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id		= PHY_ID_BCM53128,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM53128",
+	.flags		= PHY_IS_INTERNAL,
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.config_intr	= bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.led_brightness_set	= bcm_phy_led_brightness_set,
+}, {
+	.phy_id         = PHY_ID_BCM89610,
+	.phy_id_mask    = 0xfffffff0,
+	.name           = "Broadcom BCM89610",
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm54xx_get_stats,
+	.probe		= bcm54xx_phy_probe,
+	.config_init    = bcm54xx_config_init,
+	.config_intr    = bcm_phy_config_intr,
+	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+} };
+
+module_phy_driver(broadcom_drivers);
+
+static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
+	{ PHY_ID_BCM5411, 0xfffffff0 },
+	{ PHY_ID_BCM5421, 0xfffffff0 },
+	{ PHY_ID_BCM54210E, 0xfffffff0 },
+	{ PHY_ID_BCM5461, 0xfffffff0 },
+	{ PHY_ID_BCM54612E, 0xfffffff0 },
+	{ PHY_ID_BCM54616S, 0xfffffff0 },
+	{ PHY_ID_BCM5464, 0xfffffff0 },
+	{ PHY_ID_BCM5481, 0xfffffff0 },
+	{ PHY_ID_BCM54810, 0xfffffff0 },
+	{ PHY_ID_BCM54811, 0xfffffff0 },
+	{ PHY_ID_BCM5482, 0xfffffff0 },
+	{ PHY_ID_BCM50610, 0xfffffff0 },
+	{ PHY_ID_BCM50610M, 0xfffffff0 },
+	{ PHY_ID_BCM57780, 0xfffffff0 },
+	{ PHY_ID_BCMAC131, 0xfffffff0 },
+	{ PHY_ID_BCM5241, 0xfffffff0 },
+	{ PHY_ID_BCM5395, 0xfffffff0 },
+	{ PHY_ID_BCM53125, 0xfffffff0 },
+	{ PHY_ID_BCM53128, 0xfffffff0 },
+	{ PHY_ID_BCM89610, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, broadcom_tbl);