Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 238 insertions, 0 deletions

diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
new file mode 100644
index 000000000..bb9b33b6b
--- /dev/null
+++ b/drivers/net/phy/meson-gxl.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson GXL Internal PHY Driver
+ *
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ * Copyright (C) 2016 BayLibre, SAS. All rights reserved.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/bitfield.h>
+#include <linux/smscphy.h>
+
+#define TSTCNTL		20
+#define  TSTCNTL_READ		BIT(15)
+#define  TSTCNTL_WRITE		BIT(14)
+#define  TSTCNTL_REG_BANK_SEL	GENMASK(12, 11)
+#define  TSTCNTL_TEST_MODE	BIT(10)
+#define  TSTCNTL_READ_ADDRESS	GENMASK(9, 5)
+#define  TSTCNTL_WRITE_ADDRESS	GENMASK(4, 0)
+#define TSTREAD1	21
+#define TSTWRITE	23
+
+#define BANK_ANALOG_DSP		0
+#define BANK_WOL		1
+#define BANK_BIST		3
+
+/* WOL Registers */
+#define LPI_STATUS	0xc
+#define  LPI_STATUS_RSV12	BIT(12)
+
+/* BIST Registers */
+#define FR_PLL_CONTROL	0x1b
+#define FR_PLL_DIV0	0x1c
+#define FR_PLL_DIV1	0x1d
+
+static int meson_gxl_open_banks(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable Analog and DSP register Bank access by
+	 * toggling TSTCNTL_TEST_MODE bit in the TSTCNTL register
+	 */
+	ret = phy_write(phydev, TSTCNTL, 0);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, TSTCNTL, 0);
+	if (ret)
+		return ret;
+	return phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
+}
+
+static void meson_gxl_close_banks(struct phy_device *phydev)
+{
+	phy_write(phydev, TSTCNTL, 0);
+}
+
+static int meson_gxl_read_reg(struct phy_device *phydev,
+			      unsigned int bank, unsigned int reg)
+{
+	int ret;
+
+	ret = meson_gxl_open_banks(phydev);
+	if (ret)
+		goto out;
+
+	ret = phy_write(phydev, TSTCNTL, TSTCNTL_READ |
+			FIELD_PREP(TSTCNTL_REG_BANK_SEL, bank) |
+			TSTCNTL_TEST_MODE |
+			FIELD_PREP(TSTCNTL_READ_ADDRESS, reg));
+	if (ret)
+		goto out;
+
+	ret = phy_read(phydev, TSTREAD1);
+out:
+	/* Close the bank access on our way out */
+	meson_gxl_close_banks(phydev);
+	return ret;
+}
+
+static int meson_gxl_write_reg(struct phy_device *phydev,
+			       unsigned int bank, unsigned int reg,
+			       uint16_t value)
+{
+	int ret;
+
+	ret = meson_gxl_open_banks(phydev);
+	if (ret)
+		goto out;
+
+	ret = phy_write(phydev, TSTWRITE, value);
+	if (ret)
+		goto out;
+
+	ret = phy_write(phydev, TSTCNTL, TSTCNTL_WRITE |
+			FIELD_PREP(TSTCNTL_REG_BANK_SEL, bank) |
+			TSTCNTL_TEST_MODE |
+			FIELD_PREP(TSTCNTL_WRITE_ADDRESS, reg));
+
+out:
+	/* Close the bank access on our way out */
+	meson_gxl_close_banks(phydev);
+	return ret;
+}
+
+static int meson_gxl_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable fractional PLL */
+	ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_CONTROL, 0x5);
+	if (ret)
+		return ret;
+
+	/* Program fraction FR_PLL_DIV1 */
+	ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV1, 0x029a);
+	if (ret)
+		return ret;
+
+	/* Program fraction FR_PLL_DIV1 */
+	ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV0, 0xaaaa);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/* This function is provided to cope with the possible failures of this phy
+ * during aneg process. When aneg fails, the PHY reports that aneg is done
+ * but the value found in MII_LPA is wrong:
+ *  - Early failures: MII_LPA is just 0x0001. if MII_EXPANSION reports that
+ *    the link partner (LP) supports aneg but the LP never acked our base
+ *    code word, it is likely that we never sent it to begin with.
+ *  - Late failures: MII_LPA is filled with a value which seems to make sense
+ *    but it actually is not what the LP is advertising. It seems that we
+ *    can detect this using a magic bit in the WOL bank (reg 12 - bit 12).
+ *    If this particular bit is not set when aneg is reported being done,
+ *    it means MII_LPA is likely to be wrong.
+ *
+ * In both case, forcing a restart of the aneg process solve the problem.
+ * When this failure happens, the first retry is usually successful but,
+ * in some cases, it may take up to 6 retries to get a decent result
+ */
+static int meson_gxl_read_status(struct phy_device *phydev)
+{
+	int ret, wol, lpa, exp;
+
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		ret = genphy_aneg_done(phydev);
+		if (ret < 0)
+			return ret;
+		else if (!ret)
+			goto read_status_continue;
+
+		/* Aneg is done, let's check everything is fine */
+		wol = meson_gxl_read_reg(phydev, BANK_WOL, LPI_STATUS);
+		if (wol < 0)
+			return wol;
+
+		lpa = phy_read(phydev, MII_LPA);
+		if (lpa < 0)
+			return lpa;
+
+		exp = phy_read(phydev, MII_EXPANSION);
+		if (exp < 0)
+			return exp;
+
+		if (!(wol & LPI_STATUS_RSV12) ||
+		    ((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) {
+			/* Looks like aneg failed after all */
+			phydev_dbg(phydev, "LPA corruption - aneg restart\n");
+			return genphy_restart_aneg(phydev);
+		}
+	}
+
+read_status_continue:
+	return genphy_read_status(phydev);
+}
+
+static struct phy_driver meson_gxl_phy[] = {
+	{
+		PHY_ID_MATCH_EXACT(0x01814400),
+		.name		= "Meson GXL Internal PHY",
+		/* PHY_BASIC_FEATURES */
+		.flags		= PHY_IS_INTERNAL,
+		.soft_reset     = genphy_soft_reset,
+		.config_init	= meson_gxl_config_init,
+		.read_status	= meson_gxl_read_status,
+		.config_intr	= smsc_phy_config_intr,
+		.handle_interrupt = smsc_phy_handle_interrupt,
+		.suspend        = genphy_suspend,
+		.resume         = genphy_resume,
+		.read_mmd	= genphy_read_mmd_unsupported,
+		.write_mmd	= genphy_write_mmd_unsupported,
+	}, {
+		PHY_ID_MATCH_EXACT(0x01803301),
+		.name		= "Meson G12A Internal PHY",
+		/* PHY_BASIC_FEATURES */
+		.flags		= PHY_IS_INTERNAL,
+		.probe		= smsc_phy_probe,
+		.config_init	= smsc_phy_config_init,
+		.soft_reset     = genphy_soft_reset,
+		.read_status	= lan87xx_read_status,
+		.config_intr	= smsc_phy_config_intr,
+		.handle_interrupt = smsc_phy_handle_interrupt,
+
+		.get_tunable	= smsc_phy_get_tunable,
+		.set_tunable	= smsc_phy_set_tunable,
+
+		.suspend        = genphy_suspend,
+		.resume         = genphy_resume,
+		.read_mmd	= genphy_read_mmd_unsupported,
+		.write_mmd	= genphy_write_mmd_unsupported,
+	},
+};
+
+static struct mdio_device_id __maybe_unused meson_gxl_tbl[] = {
+	{ PHY_ID_MATCH_VENDOR(0x01814400) },
+	{ PHY_ID_MATCH_VENDOR(0x01803301) },
+	{ }
+};
+
+module_phy_driver(meson_gxl_phy);
+
+MODULE_DEVICE_TABLE(mdio, meson_gxl_tbl);
+
+MODULE_DESCRIPTION("Amlogic Meson GXL Internal PHY driver");
+MODULE_AUTHOR("Baoqi wang");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL");