Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 416 insertions, 0 deletions

diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
new file mode 100644
index 000000000..0b88635f4
--- /dev/null
+++ b/drivers/net/phy/microchip.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Microchip Technology
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/microchipphy.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/net/microchip-lan78xx.h>
+
+#define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@microchip.com>"
+#define DRIVER_DESC	"Microchip LAN88XX PHY driver"
+
+struct lan88xx_priv {
+	int	chip_id;
+	int	chip_rev;
+	__u32	wolopts;
+};
+
+static int lan88xx_read_page(struct phy_device *phydev)
+{
+	return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS);
+}
+
+static int lan88xx_write_page(struct phy_device *phydev, int page)
+{
+	return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page);
+}
+
+static int lan88xx_phy_config_intr(struct phy_device *phydev)
+{
+	int rc;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* unmask all source and clear them before enable */
+		rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF);
+		rc = phy_read(phydev, LAN88XX_INT_STS);
+		rc = phy_write(phydev, LAN88XX_INT_MASK,
+			       LAN88XX_INT_MASK_MDINTPIN_EN_ |
+			       LAN88XX_INT_MASK_LINK_CHANGE_);
+	} else {
+		rc = phy_write(phydev, LAN88XX_INT_MASK, 0);
+		if (rc)
+			return rc;
+
+		/* Ack interrupts after they have been disabled */
+		rc = phy_read(phydev, LAN88XX_INT_STS);
+	}
+
+	return rc < 0 ? rc : 0;
+}
+
+static irqreturn_t lan88xx_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, LAN88XX_INT_STS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & LAN88XX_INT_STS_LINK_CHANGE_))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int lan88xx_suspend(struct phy_device *phydev)
+{
+	struct lan88xx_priv *priv = phydev->priv;
+
+	/* do not power down PHY when WOL is enabled */
+	if (!priv->wolopts)
+		genphy_suspend(phydev);
+
+	return 0;
+}
+
+static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
+			      u32 data)
+{
+	int val, save_page, ret = 0;
+	u16 buf;
+
+	/* Save current page */
+	save_page = phy_save_page(phydev);
+	if (save_page < 0) {
+		phydev_warn(phydev, "Failed to get current page\n");
+		goto err;
+	}
+
+	/* Switch to TR page */
+	lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR);
+
+	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
+			  (data & 0xFFFF));
+	if (ret < 0) {
+		phydev_warn(phydev, "Failed to write TR low data\n");
+		goto err;
+	}
+
+	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
+			  (data & 0x00FF0000) >> 16);
+	if (ret < 0) {
+		phydev_warn(phydev, "Failed to write TR high data\n");
+		goto err;
+	}
+
+	/* Config control bits [15:13] of register */
+	buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */
+	buf |= 0x8000; /* Set [15] to Packet transmit */
+
+	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
+	if (ret < 0) {
+		phydev_warn(phydev, "Failed to write data in reg\n");
+		goto err;
+	}
+
+	usleep_range(1000, 2000);/* Wait for Data to be written */
+	val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
+	if (!(val & 0x8000))
+		phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
+			    regaddr);
+err:
+	return phy_restore_page(phydev, save_page, ret);
+}
+
+static void lan88xx_config_TR_regs(struct phy_device *phydev)
+{
+	int err;
+
+	/* Get access to Channel 0x1, Node 0xF , Register 0x01.
+	 * Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf,
+	 * MrvlTrFix1000Kp, MasterEnableTR bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x06.
+	 * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
+	 * SSTrKp1000Mas bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
+
+	/* Get access to Channel b'10, Node b'1111, Register 0x11.
+	 * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
+	 * bits
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x10.
+	 * Write 24-bit value 0xEEFFDD to register. Setting
+	 * eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000,
+	 * eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x13.
+	 * Write 24-bit value 0x071448 to register. Setting
+	 * slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x12.
+	 * Write 24-bit value 0x13132F to register. Setting
+	 * slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x14.
+	 * Write 24-bit value 0x0 to register. Setting eee_3level_delay,
+	 * eee_TrKf_freeze_delay bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
+
+	/* Get access to Channel b'01, Node b'1111, Register 0x34.
+	 * Write 24-bit value 0x91B06C to register. Setting
+	 * FastMseSearchThreshLong1000, FastMseSearchThreshShort1000,
+	 * FastMseSearchUpdGain1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
+
+	/* Get access to Channel b'01, Node b'1111, Register 0x3E.
+	 * Write 24-bit value 0xC0A028 to register. Setting
+	 * FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000,
+	 * FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
+
+	/* Get access to Channel b'01, Node b'1111, Register 0x35.
+	 * Write 24-bit value 0x041600 to register. Setting
+	 * FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000,
+	 * FastMsePhChangeDelay1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x03.
+	 * Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
+	if (err < 0)
+		phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
+}
+
+static int lan88xx_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct lan88xx_priv *priv;
+	u32 led_modes[4];
+	int len;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->wolopts = 0;
+
+	len = of_property_read_variable_u32_array(dev->of_node,
+						  "microchip,led-modes",
+						  led_modes,
+						  0,
+						  ARRAY_SIZE(led_modes));
+	if (len >= 0) {
+		u32 reg = 0;
+		int i;
+
+		for (i = 0; i < len; i++) {
+			if (led_modes[i] > 15)
+				return -EINVAL;
+			reg |= led_modes[i] << (i * 4);
+		}
+		for (; i < ARRAY_SIZE(led_modes); i++)
+			reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
+		(void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
+	} else if (len == -EOVERFLOW) {
+		return -EINVAL;
+	}
+
+	/* these values can be used to identify internal PHY */
+	priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
+	priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static void lan88xx_remove(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct lan88xx_priv *priv = phydev->priv;
+
+	if (priv)
+		devm_kfree(dev, priv);
+}
+
+static int lan88xx_set_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	struct lan88xx_priv *priv = phydev->priv;
+
+	priv->wolopts = wol->wolopts;
+
+	return 0;
+}
+
+static void lan88xx_set_mdix(struct phy_device *phydev)
+{
+	int buf;
+	int val;
+
+	switch (phydev->mdix_ctrl) {
+	case ETH_TP_MDI:
+		val = LAN88XX_EXT_MODE_CTRL_MDI_;
+		break;
+	case ETH_TP_MDI_X:
+		val = LAN88XX_EXT_MODE_CTRL_MDI_X_;
+		break;
+	case ETH_TP_MDI_AUTO:
+		val = LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_;
+		break;
+	default:
+		return;
+	}
+
+	phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_1);
+	buf = phy_read(phydev, LAN88XX_EXT_MODE_CTRL);
+	buf &= ~LAN88XX_EXT_MODE_CTRL_MDIX_MASK_;
+	buf |= val;
+	phy_write(phydev, LAN88XX_EXT_MODE_CTRL, buf);
+	phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0);
+}
+
+static int lan88xx_config_init(struct phy_device *phydev)
+{
+	int val;
+
+	/*Zerodetect delay enable */
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS,
+			   PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
+	val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_;
+
+	phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG,
+		      val);
+
+	/* Config DSP registers */
+	lan88xx_config_TR_regs(phydev);
+
+	return 0;
+}
+
+static int lan88xx_config_aneg(struct phy_device *phydev)
+{
+	lan88xx_set_mdix(phydev);
+
+	return genphy_config_aneg(phydev);
+}
+
+static void lan88xx_link_change_notify(struct phy_device *phydev)
+{
+	int temp;
+
+	/* At forced 100 F/H mode, chip may fail to set mode correctly
+	 * when cable is switched between long(~50+m) and short one.
+	 * As workaround, set to 10 before setting to 100
+	 * at forced 100 F/H mode.
+	 */
+	if (!phydev->autoneg && phydev->speed == 100) {
+		/* disable phy interrupt */
+		temp = phy_read(phydev, LAN88XX_INT_MASK);
+		temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
+		phy_write(phydev, LAN88XX_INT_MASK, temp);
+
+		temp = phy_read(phydev, MII_BMCR);
+		temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
+		phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
+		temp |= BMCR_SPEED100;
+		phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
+
+		/* clear pending interrupt generated while workaround */
+		temp = phy_read(phydev, LAN88XX_INT_STS);
+
+		/* enable phy interrupt back */
+		temp = phy_read(phydev, LAN88XX_INT_MASK);
+		temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
+		phy_write(phydev, LAN88XX_INT_MASK, temp);
+	}
+}
+
+static struct phy_driver microchip_phy_driver[] = {
+{
+	.phy_id		= 0x0007c132,
+	/* This mask (0xfffffff2) is to differentiate from
+	 * LAN8742 (phy_id 0x0007c130 and 0x0007c131)
+	 * and allows future phy_id revisions.
+	 */
+	.phy_id_mask	= 0xfffffff2,
+	.name		= "Microchip LAN88xx",
+
+	/* PHY_GBIT_FEATURES */
+
+	.probe		= lan88xx_probe,
+	.remove		= lan88xx_remove,
+
+	.config_init	= lan88xx_config_init,
+	.config_aneg	= lan88xx_config_aneg,
+	.link_change_notify = lan88xx_link_change_notify,
+
+	.config_intr	= lan88xx_phy_config_intr,
+	.handle_interrupt = lan88xx_handle_interrupt,
+
+	.suspend	= lan88xx_suspend,
+	.resume		= genphy_resume,
+	.set_wol	= lan88xx_set_wol,
+	.read_page	= lan88xx_read_page,
+	.write_page	= lan88xx_write_page,
+} };
+
+module_phy_driver(microchip_phy_driver);
+
+static struct mdio_device_id __maybe_unused microchip_tbl[] = {
+	{ 0x0007c132, 0xfffffff2 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, microchip_tbl);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");