Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1043 insertions, 0 deletions

diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
new file mode 100644
index 0000000000..ea1073adc5
--- /dev/null
+++ b/drivers/net/phy/mxl-gpy.c
@@ -0,0 +1,1043 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2021 Maxlinear Corporation
+ * Copyright (C) 2020 Intel Corporation
+ *
+ * Drivers for Maxlinear Ethernet GPY
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/bitfield.h>
+#include <linux/hwmon.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/polynomial.h>
+#include <linux/property.h>
+#include <linux/netdevice.h>
+
+/* PHY ID */
+#define PHY_ID_GPYx15B_MASK	0xFFFFFFFC
+#define PHY_ID_GPY21xB_MASK	0xFFFFFFF9
+#define PHY_ID_GPY2xx		0x67C9DC00
+#define PHY_ID_GPY115B		0x67C9DF00
+#define PHY_ID_GPY115C		0x67C9DF10
+#define PHY_ID_GPY211B		0x67C9DE08
+#define PHY_ID_GPY211C		0x67C9DE10
+#define PHY_ID_GPY212B		0x67C9DE09
+#define PHY_ID_GPY212C		0x67C9DE20
+#define PHY_ID_GPY215B		0x67C9DF04
+#define PHY_ID_GPY215C		0x67C9DF20
+#define PHY_ID_GPY241B		0x67C9DE40
+#define PHY_ID_GPY241BM		0x67C9DE80
+#define PHY_ID_GPY245B		0x67C9DEC0
+
+#define PHY_CTL1		0x13
+#define PHY_CTL1_MDICD		BIT(3)
+#define PHY_CTL1_MDIAB		BIT(2)
+#define PHY_CTL1_AMDIX		BIT(0)
+#define PHY_MIISTAT		0x18	/* MII state */
+#define PHY_IMASK		0x19	/* interrupt mask */
+#define PHY_ISTAT		0x1A	/* interrupt status */
+#define PHY_FWV			0x1E	/* firmware version */
+
+#define PHY_MIISTAT_SPD_MASK	GENMASK(2, 0)
+#define PHY_MIISTAT_DPX		BIT(3)
+#define PHY_MIISTAT_LS		BIT(10)
+
+#define PHY_MIISTAT_SPD_10	0
+#define PHY_MIISTAT_SPD_100	1
+#define PHY_MIISTAT_SPD_1000	2
+#define PHY_MIISTAT_SPD_2500	4
+
+#define PHY_IMASK_WOL		BIT(15)	/* Wake-on-LAN */
+#define PHY_IMASK_ANC		BIT(10)	/* Auto-Neg complete */
+#define PHY_IMASK_ADSC		BIT(5)	/* Link auto-downspeed detect */
+#define PHY_IMASK_DXMC		BIT(2)	/* Duplex mode change */
+#define PHY_IMASK_LSPC		BIT(1)	/* Link speed change */
+#define PHY_IMASK_LSTC		BIT(0)	/* Link state change */
+#define PHY_IMASK_MASK		(PHY_IMASK_LSTC | \
+				 PHY_IMASK_LSPC | \
+				 PHY_IMASK_DXMC | \
+				 PHY_IMASK_ADSC | \
+				 PHY_IMASK_ANC)
+
+#define PHY_FWV_REL_MASK	BIT(15)
+#define PHY_FWV_MAJOR_MASK	GENMASK(11, 8)
+#define PHY_FWV_MINOR_MASK	GENMASK(7, 0)
+
+#define PHY_PMA_MGBT_POLARITY	0x82
+#define PHY_MDI_MDI_X_MASK	GENMASK(1, 0)
+#define PHY_MDI_MDI_X_NORMAL	0x3
+#define PHY_MDI_MDI_X_AB	0x2
+#define PHY_MDI_MDI_X_CD	0x1
+#define PHY_MDI_MDI_X_CROSS	0x0
+
+/* SGMII */
+#define VSPEC1_SGMII_CTRL	0x08
+#define VSPEC1_SGMII_CTRL_ANEN	BIT(12)		/* Aneg enable */
+#define VSPEC1_SGMII_CTRL_ANRS	BIT(9)		/* Restart Aneg */
+#define VSPEC1_SGMII_ANEN_ANRS	(VSPEC1_SGMII_CTRL_ANEN | \
+				 VSPEC1_SGMII_CTRL_ANRS)
+
+/* Temperature sensor */
+#define VSPEC1_TEMP_STA	0x0E
+#define VSPEC1_TEMP_STA_DATA	GENMASK(9, 0)
+
+/* Mailbox */
+#define VSPEC1_MBOX_DATA	0x5
+#define VSPEC1_MBOX_ADDRLO	0x6
+#define VSPEC1_MBOX_CMD		0x7
+#define VSPEC1_MBOX_CMD_ADDRHI	GENMASK(7, 0)
+#define VSPEC1_MBOX_CMD_RD	(0 << 8)
+#define VSPEC1_MBOX_CMD_READY	BIT(15)
+
+/* WoL */
+#define VPSPEC2_WOL_CTL		0x0E06
+#define VPSPEC2_WOL_AD01	0x0E08
+#define VPSPEC2_WOL_AD23	0x0E09
+#define VPSPEC2_WOL_AD45	0x0E0A
+#define WOL_EN			BIT(0)
+
+/* Internal registers, access via mbox */
+#define REG_GPIO0_OUT		0xd3ce00
+
+struct gpy_priv {
+	/* serialize mailbox acesses */
+	struct mutex mbox_lock;
+
+	u8 fw_major;
+	u8 fw_minor;
+
+	/* It takes 3 seconds to fully switch out of loopback mode before
+	 * it can safely re-enter loopback mode. Record the time when
+	 * loopback is disabled. Check and wait if necessary before loopback
+	 * is enabled.
+	 */
+	u64 lb_dis_to;
+};
+
+static const struct {
+	int major;
+	int minor;
+} ver_need_sgmii_reaneg[] = {
+	{7, 0x6D},
+	{8, 0x6D},
+	{9, 0x73},
+};
+
+#if IS_ENABLED(CONFIG_HWMON)
+/* The original translation formulae of the temperature (in degrees of Celsius)
+ * are as follows:
+ *
+ *   T = -2.5761e-11*(N^4) + 9.7332e-8*(N^3) + -1.9165e-4*(N^2) +
+ *       3.0762e-1*(N^1) + -5.2156e1
+ *
+ * where [-52.156, 137.961]C and N = [0, 1023].
+ *
+ * They must be accordingly altered to be suitable for the integer arithmetics.
+ * The technique is called 'factor redistribution', which just makes sure the
+ * multiplications and divisions are made so to have a result of the operations
+ * within the integer numbers limit. In addition we need to translate the
+ * formulae to accept millidegrees of Celsius. Here what it looks like after
+ * the alterations:
+ *
+ *   T = -25761e-12*(N^4) + 97332e-9*(N^3) + -191650e-6*(N^2) +
+ *       307620e-3*(N^1) + -52156
+ *
+ * where T = [-52156, 137961]mC and N = [0, 1023].
+ */
+static const struct polynomial poly_N_to_temp = {
+	.terms = {
+		{4,  -25761, 1000, 1},
+		{3,   97332, 1000, 1},
+		{2, -191650, 1000, 1},
+		{1,  307620, 1000, 1},
+		{0,  -52156,    1, 1}
+	}
+};
+
+static int gpy_hwmon_read(struct device *dev,
+			  enum hwmon_sensor_types type,
+			  u32 attr, int channel, long *value)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_TEMP_STA);
+	if (ret < 0)
+		return ret;
+	if (!ret)
+		return -ENODATA;
+
+	*value = polynomial_calc(&poly_N_to_temp,
+				 FIELD_GET(VSPEC1_TEMP_STA_DATA, ret));
+
+	return 0;
+}
+
+static umode_t gpy_hwmon_is_visible(const void *data,
+				    enum hwmon_sensor_types type,
+				    u32 attr, int channel)
+{
+	return 0444;
+}
+
+static const struct hwmon_channel_info * const gpy_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops gpy_hwmon_hwmon_ops = {
+	.is_visible	= gpy_hwmon_is_visible,
+	.read		= gpy_hwmon_read,
+};
+
+static const struct hwmon_chip_info gpy_hwmon_chip_info = {
+	.ops		= &gpy_hwmon_hwmon_ops,
+	.info		= gpy_hwmon_info,
+};
+
+static int gpy_hwmon_register(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct device *hwmon_dev;
+	char *hwmon_name;
+
+	hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev));
+	if (IS_ERR(hwmon_name))
+		return PTR_ERR(hwmon_name);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
+							 phydev,
+							 &gpy_hwmon_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+#else
+static int gpy_hwmon_register(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif
+
+static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
+{
+	struct gpy_priv *priv = phydev->priv;
+	int val, ret;
+	u16 cmd;
+
+	mutex_lock(&priv->mbox_lock);
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_MBOX_ADDRLO,
+			    addr);
+	if (ret)
+		goto out;
+
+	cmd = VSPEC1_MBOX_CMD_RD;
+	cmd |= FIELD_PREP(VSPEC1_MBOX_CMD_ADDRHI, addr >> 16);
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_MBOX_CMD, cmd);
+	if (ret)
+		goto out;
+
+	/* The mbox read is used in the interrupt workaround. It was observed
+	 * that a read might take up to 2.5ms. This is also the time for which
+	 * the interrupt line is stuck low. To be on the safe side, poll the
+	 * ready bit for 10ms.
+	 */
+	ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
+					VSPEC1_MBOX_CMD, val,
+					(val & VSPEC1_MBOX_CMD_READY),
+					500, 10000, false);
+	if (ret)
+		goto out;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_MBOX_DATA);
+
+out:
+	mutex_unlock(&priv->mbox_lock);
+	return ret;
+}
+
+static int gpy_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Mask all interrupts */
+	ret = phy_write(phydev, PHY_IMASK, 0);
+	if (ret)
+		return ret;
+
+	/* Clear all pending interrupts */
+	ret = phy_read(phydev, PHY_ISTAT);
+	return ret < 0 ? ret : 0;
+}
+
+static int gpy_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct gpy_priv *priv;
+	int fw_version;
+	int ret;
+
+	if (!phydev->is_c45) {
+		ret = phy_get_c45_ids(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	phydev->priv = priv;
+	mutex_init(&priv->mbox_lock);
+
+	if (!device_property_present(dev, "maxlinear,use-broken-interrupts"))
+		phydev->dev_flags |= PHY_F_NO_IRQ;
+
+	fw_version = phy_read(phydev, PHY_FWV);
+	if (fw_version < 0)
+		return fw_version;
+	priv->fw_major = FIELD_GET(PHY_FWV_MAJOR_MASK, fw_version);
+	priv->fw_minor = FIELD_GET(PHY_FWV_MINOR_MASK, fw_version);
+
+	ret = gpy_hwmon_register(phydev);
+	if (ret)
+		return ret;
+
+	/* Show GPY PHY FW version in dmesg */
+	phydev_info(phydev, "Firmware Version: %d.%d (0x%04X%s)\n",
+		    priv->fw_major, priv->fw_minor, fw_version,
+		    fw_version & PHY_FWV_REL_MASK ? "" : " test version");
+
+	return 0;
+}
+
+static bool gpy_sgmii_need_reaneg(struct phy_device *phydev)
+{
+	struct gpy_priv *priv = phydev->priv;
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(ver_need_sgmii_reaneg); i++) {
+		if (priv->fw_major != ver_need_sgmii_reaneg[i].major)
+			continue;
+		if (priv->fw_minor < ver_need_sgmii_reaneg[i].minor)
+			return true;
+		break;
+	}
+
+	return false;
+}
+
+static bool gpy_2500basex_chk(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, PHY_MIISTAT);
+	if (ret < 0) {
+		phydev_err(phydev, "Error: MDIO register access failed: %d\n",
+			   ret);
+		return false;
+	}
+
+	if (!(ret & PHY_MIISTAT_LS) ||
+	    FIELD_GET(PHY_MIISTAT_SPD_MASK, ret) != PHY_MIISTAT_SPD_2500)
+		return false;
+
+	phydev->speed = SPEED_2500;
+	phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+	phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+		       VSPEC1_SGMII_CTRL_ANEN, 0);
+	return true;
+}
+
+static bool gpy_sgmii_aneg_en(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL);
+	if (ret < 0) {
+		phydev_err(phydev, "Error: MMD register access failed: %d\n",
+			   ret);
+		return true;
+	}
+
+	return (ret & VSPEC1_SGMII_CTRL_ANEN) ? true : false;
+}
+
+static int gpy_config_mdix(struct phy_device *phydev, u8 ctrl)
+{
+	int ret;
+	u16 val;
+
+	switch (ctrl) {
+	case ETH_TP_MDI_AUTO:
+		val = PHY_CTL1_AMDIX;
+		break;
+	case ETH_TP_MDI_X:
+		val = (PHY_CTL1_MDIAB | PHY_CTL1_MDICD);
+		break;
+	case ETH_TP_MDI:
+		val = 0;
+		break;
+	default:
+		return 0;
+	}
+
+	ret =  phy_modify(phydev, PHY_CTL1, PHY_CTL1_AMDIX | PHY_CTL1_MDIAB |
+			  PHY_CTL1_MDICD, val);
+	if (ret < 0)
+		return ret;
+
+	return genphy_c45_restart_aneg(phydev);
+}
+
+static int gpy_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	u32 adv;
+	int ret;
+
+	if (phydev->autoneg == AUTONEG_DISABLE) {
+		/* Configure half duplex with genphy_setup_forced,
+		 * because genphy_c45_pma_setup_forced does not support.
+		 */
+		return phydev->duplex != DUPLEX_FULL
+			? genphy_setup_forced(phydev)
+			: genphy_c45_pma_setup_forced(phydev);
+	}
+
+	ret = gpy_config_mdix(phydev,  phydev->mdix_ctrl);
+	if (ret < 0)
+		return ret;
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
+	ret = phy_modify_changed(phydev, MII_CTRL1000,
+				 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
+				 adv);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	ret = genphy_c45_check_and_restart_aneg(phydev, changed);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_USXGMII ||
+	    phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
+		return 0;
+
+	/* No need to trigger re-ANEG if link speed is 2.5G or SGMII ANEG is
+	 * disabled.
+	 */
+	if (!gpy_sgmii_need_reaneg(phydev) || gpy_2500basex_chk(phydev) ||
+	    !gpy_sgmii_aneg_en(phydev))
+		return 0;
+
+	/* There is a design constraint in GPY2xx device where SGMII AN is
+	 * only triggered when there is change of speed. If, PHY link
+	 * partner`s speed is still same even after PHY TPI is down and up
+	 * again, SGMII AN is not triggered and hence no new in-band message
+	 * from GPY to MAC side SGMII.
+	 * This could cause an issue during power up, when PHY is up prior to
+	 * MAC. At this condition, once MAC side SGMII is up, MAC side SGMII
+	 * wouldn`t receive new in-band message from GPY with correct link
+	 * status, speed and duplex info.
+	 *
+	 * 1) If PHY is already up and TPI link status is still down (such as
+	 *    hard reboot), TPI link status is polled for 4 seconds before
+	 *    retriggerring SGMII AN.
+	 * 2) If PHY is already up and TPI link status is also up (such as soft
+	 *    reboot), polling of TPI link status is not needed and SGMII AN is
+	 *    immediately retriggered.
+	 * 3) Other conditions such as PHY is down, speed change etc, skip
+	 *    retriggering SGMII AN. Note: in case of speed change, GPY FW will
+	 *    initiate SGMII AN.
+	 */
+
+	if (phydev->state != PHY_UP)
+		return 0;
+
+	ret = phy_read_poll_timeout(phydev, MII_BMSR, ret, ret & BMSR_LSTATUS,
+				    20000, 4000000, false);
+	if (ret == -ETIMEDOUT)
+		return 0;
+	else if (ret < 0)
+		return ret;
+
+	/* Trigger SGMII AN. */
+	return phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+			      VSPEC1_SGMII_CTRL_ANRS, VSPEC1_SGMII_CTRL_ANRS);
+}
+
+static int gpy_update_mdix(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, PHY_CTL1);
+	if (ret < 0)
+		return ret;
+
+	if (ret & PHY_CTL1_AMDIX)
+		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+	else
+		if (ret & PHY_CTL1_MDICD || ret & PHY_CTL1_MDIAB)
+			phydev->mdix_ctrl = ETH_TP_MDI_X;
+		else
+			phydev->mdix_ctrl = ETH_TP_MDI;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, PHY_PMA_MGBT_POLARITY);
+	if (ret < 0)
+		return ret;
+
+	if ((ret & PHY_MDI_MDI_X_MASK) < PHY_MDI_MDI_X_NORMAL)
+		phydev->mdix = ETH_TP_MDI_X;
+	else
+		phydev->mdix = ETH_TP_MDI;
+
+	return 0;
+}
+
+static int gpy_update_interface(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Interface mode is fixed for USXGMII and integrated PHY */
+	if (phydev->interface == PHY_INTERFACE_MODE_USXGMII ||
+	    phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
+		return -EINVAL;
+
+	/* Automatically switch SERDES interface between SGMII and 2500-BaseX
+	 * according to speed. Disable ANEG in 2500-BaseX mode.
+	 */
+	switch (phydev->speed) {
+	case SPEED_2500:
+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+				     VSPEC1_SGMII_CTRL_ANEN, 0);
+		if (ret < 0) {
+			phydev_err(phydev,
+				   "Error: Disable of SGMII ANEG failed: %d\n",
+				   ret);
+			return ret;
+		}
+		break;
+	case SPEED_1000:
+	case SPEED_100:
+	case SPEED_10:
+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+		if (gpy_sgmii_aneg_en(phydev))
+			break;
+		/* Enable and restart SGMII ANEG for 10/100/1000Mbps link speed
+		 * if ANEG is disabled (in 2500-BaseX mode).
+		 */
+		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+				     VSPEC1_SGMII_ANEN_ANRS,
+				     VSPEC1_SGMII_ANEN_ANRS);
+		if (ret < 0) {
+			phydev_err(phydev,
+				   "Error: Enable of SGMII ANEG failed: %d\n",
+				   ret);
+			return ret;
+		}
+		break;
+	}
+
+	if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) {
+		ret = genphy_read_master_slave(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	return gpy_update_mdix(phydev);
+}
+
+static int gpy_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_update_link(phydev);
+	if (ret)
+		return ret;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+		ret = genphy_c45_read_lpa(phydev);
+		if (ret < 0)
+			return ret;
+
+		/* Read the link partner's 1G advertisement */
+		ret = phy_read(phydev, MII_STAT1000);
+		if (ret < 0)
+			return ret;
+		mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
+	} else if (phydev->autoneg == AUTONEG_DISABLE) {
+		linkmode_zero(phydev->lp_advertising);
+	}
+
+	ret = phy_read(phydev, PHY_MIISTAT);
+	if (ret < 0)
+		return ret;
+
+	phydev->link = (ret & PHY_MIISTAT_LS) ? 1 : 0;
+	phydev->duplex = (ret & PHY_MIISTAT_DPX) ? DUPLEX_FULL : DUPLEX_HALF;
+	switch (FIELD_GET(PHY_MIISTAT_SPD_MASK, ret)) {
+	case PHY_MIISTAT_SPD_10:
+		phydev->speed = SPEED_10;
+		break;
+	case PHY_MIISTAT_SPD_100:
+		phydev->speed = SPEED_100;
+		break;
+	case PHY_MIISTAT_SPD_1000:
+		phydev->speed = SPEED_1000;
+		break;
+	case PHY_MIISTAT_SPD_2500:
+		phydev->speed = SPEED_2500;
+		break;
+	}
+
+	if (phydev->link) {
+		ret = gpy_update_interface(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int gpy_config_intr(struct phy_device *phydev)
+{
+	u16 mask = 0;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		mask = PHY_IMASK_MASK;
+
+	return phy_write(phydev, PHY_IMASK, mask);
+}
+
+static irqreturn_t gpy_handle_interrupt(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read(phydev, PHY_ISTAT);
+	if (reg < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(reg & PHY_IMASK_MASK))
+		return IRQ_NONE;
+
+	/* The PHY might leave the interrupt line asserted even after PHY_ISTAT
+	 * is read. To avoid interrupt storms, delay the interrupt handling as
+	 * long as the PHY drives the interrupt line. An internal bus read will
+	 * stall as long as the interrupt line is asserted, thus just read a
+	 * random register here.
+	 * Because we cannot access the internal bus at all while the interrupt
+	 * is driven by the PHY, there is no way to make the interrupt line
+	 * unstuck (e.g. by changing the pinmux to GPIO input) during that time
+	 * frame. Therefore, polling is the best we can do and won't do any more
+	 * harm.
+	 * It was observed that this bug happens on link state and link speed
+	 * changes independent of the firmware version.
+	 */
+	if (reg & (PHY_IMASK_LSTC | PHY_IMASK_LSPC)) {
+		reg = gpy_mbox_read(phydev, REG_GPIO0_OUT);
+		if (reg < 0) {
+			phy_error(phydev);
+			return IRQ_NONE;
+		}
+	}
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int gpy_set_wol(struct phy_device *phydev,
+		       struct ethtool_wolinfo *wol)
+{
+	struct net_device *attach_dev = phydev->attached_dev;
+	int ret;
+
+	if (wol->wolopts & WAKE_MAGIC) {
+		/* MAC address - Byte0:Byte1:Byte2:Byte3:Byte4:Byte5
+		 * VPSPEC2_WOL_AD45 = Byte0:Byte1
+		 * VPSPEC2_WOL_AD23 = Byte2:Byte3
+		 * VPSPEC2_WOL_AD01 = Byte4:Byte5
+		 */
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+				       VPSPEC2_WOL_AD45,
+				       ((attach_dev->dev_addr[0] << 8) |
+				       attach_dev->dev_addr[1]));
+		if (ret < 0)
+			return ret;
+
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+				       VPSPEC2_WOL_AD23,
+				       ((attach_dev->dev_addr[2] << 8) |
+				       attach_dev->dev_addr[3]));
+		if (ret < 0)
+			return ret;
+
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+				       VPSPEC2_WOL_AD01,
+				       ((attach_dev->dev_addr[4] << 8) |
+				       attach_dev->dev_addr[5]));
+		if (ret < 0)
+			return ret;
+
+		/* Enable the WOL interrupt */
+		ret = phy_write(phydev, PHY_IMASK, PHY_IMASK_WOL);
+		if (ret < 0)
+			return ret;
+
+		/* Enable magic packet matching */
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+				       VPSPEC2_WOL_CTL,
+				       WOL_EN);
+		if (ret < 0)
+			return ret;
+
+		/* Clear the interrupt status register.
+		 * Only WoL is enabled so clear all.
+		 */
+		ret = phy_read(phydev, PHY_ISTAT);
+		if (ret < 0)
+			return ret;
+	} else {
+		/* Disable magic packet matching */
+		ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
+					 VPSPEC2_WOL_CTL,
+					 WOL_EN);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (wol->wolopts & WAKE_PHY) {
+		/* Enable the link state change interrupt */
+		ret = phy_set_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
+		if (ret < 0)
+			return ret;
+
+		/* Clear the interrupt status register */
+		ret = phy_read(phydev, PHY_ISTAT);
+		if (ret < 0)
+			return ret;
+
+		if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
+			phy_trigger_machine(phydev);
+
+		return 0;
+	}
+
+	/* Disable the link state change interrupt */
+	return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
+}
+
+static void gpy_get_wol(struct phy_device *phydev,
+			struct ethtool_wolinfo *wol)
+{
+	int ret;
+
+	wol->supported = WAKE_MAGIC | WAKE_PHY;
+	wol->wolopts = 0;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
+	if (ret & WOL_EN)
+		wol->wolopts |= WAKE_MAGIC;
+
+	ret = phy_read(phydev, PHY_IMASK);
+	if (ret & PHY_IMASK_LSTC)
+		wol->wolopts |= WAKE_PHY;
+}
+
+static int gpy_loopback(struct phy_device *phydev, bool enable)
+{
+	struct gpy_priv *priv = phydev->priv;
+	u16 set = 0;
+	int ret;
+
+	if (enable) {
+		u64 now = get_jiffies_64();
+
+		/* wait until 3 seconds from last disable */
+		if (time_before64(now, priv->lb_dis_to))
+			msleep(jiffies64_to_msecs(priv->lb_dis_to - now));
+
+		set = BMCR_LOOPBACK;
+	}
+
+	ret = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, set);
+	if (ret <= 0)
+		return ret;
+
+	if (enable) {
+		/* It takes some time for PHY device to switch into
+		 * loopback mode.
+		 */
+		msleep(100);
+	} else {
+		priv->lb_dis_to = get_jiffies_64() + HZ * 3;
+	}
+
+	return 0;
+}
+
+static int gpy115_loopback(struct phy_device *phydev, bool enable)
+{
+	struct gpy_priv *priv = phydev->priv;
+
+	if (enable)
+		return gpy_loopback(phydev, enable);
+
+	if (priv->fw_minor > 0x76)
+		return gpy_loopback(phydev, 0);
+
+	return genphy_soft_reset(phydev);
+}
+
+static struct phy_driver gpy_drivers[] = {
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx),
+		.name		= "Maxlinear Ethernet GPY2xx",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		.phy_id		= PHY_ID_GPY115B,
+		.phy_id_mask	= PHY_ID_GPYx15B_MASK,
+		.name		= "Maxlinear Ethernet GPY115B",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy115_loopback,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY115C),
+		.name		= "Maxlinear Ethernet GPY115C",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy115_loopback,
+	},
+	{
+		.phy_id		= PHY_ID_GPY211B,
+		.phy_id_mask	= PHY_ID_GPY21xB_MASK,
+		.name		= "Maxlinear Ethernet GPY211B",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY211C),
+		.name		= "Maxlinear Ethernet GPY211C",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		.phy_id		= PHY_ID_GPY212B,
+		.phy_id_mask	= PHY_ID_GPY21xB_MASK,
+		.name		= "Maxlinear Ethernet GPY212B",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY212C),
+		.name		= "Maxlinear Ethernet GPY212C",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		.phy_id		= PHY_ID_GPY215B,
+		.phy_id_mask	= PHY_ID_GPYx15B_MASK,
+		.name		= "Maxlinear Ethernet GPY215B",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY215C),
+		.name		= "Maxlinear Ethernet GPY215C",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY241B),
+		.name		= "Maxlinear Ethernet GPY241B",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM),
+		.name		= "Maxlinear Ethernet GPY241BM",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_GPY245B),
+		.name		= "Maxlinear Ethernet GPY245B",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.config_init	= gpy_config_init,
+		.probe		= gpy_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.config_aneg	= gpy_config_aneg,
+		.aneg_done	= genphy_c45_aneg_done,
+		.read_status	= gpy_read_status,
+		.config_intr	= gpy_config_intr,
+		.handle_interrupt = gpy_handle_interrupt,
+		.set_wol	= gpy_set_wol,
+		.get_wol	= gpy_get_wol,
+		.set_loopback	= gpy_loopback,
+	},
+};
+module_phy_driver(gpy_drivers);
+
+static struct mdio_device_id __maybe_unused gpy_tbl[] = {
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx)},
+	{PHY_ID_GPY115B, PHY_ID_GPYx15B_MASK},
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY115C)},
+	{PHY_ID_GPY211B, PHY_ID_GPY21xB_MASK},
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY211C)},
+	{PHY_ID_GPY212B, PHY_ID_GPY21xB_MASK},
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY212C)},
+	{PHY_ID_GPY215B, PHY_ID_GPYx15B_MASK},
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY215C)},
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY241B)},
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM)},
+	{PHY_ID_MATCH_MODEL(PHY_ID_GPY245B)},
+	{ }
+};
+MODULE_DEVICE_TABLE(mdio, gpy_tbl);
+
+MODULE_DESCRIPTION("Maxlinear Ethernet GPY Driver");
+MODULE_AUTHOR("Xu Liang");
+MODULE_LICENSE("GPL");