Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

30 files changed, 5591 insertions, 2651 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 9e2672800f..1df0595c5b 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -232,6 +232,7 @@ config MARVELL_10G_PHY
 
 config MARVELL_88Q2XXX_PHY
 	tristate "Marvell 88Q2XXX PHY"
+	depends on HWMON || HWMON=n
 	help
 	  Support for the Marvell 88Q2XXX 100/1000BASE-T1 Automotive Ethernet
 	  PHYs.
@@ -335,12 +336,7 @@ config NCN26000_PHY
 	  Currently supports the NCN26000 10BASE-T1S Industrial PHY
 	  with MII interface.
 
-config AT803X_PHY
-	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
-	depends on REGULATOR
-	help
-	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
-	  QCA8337(Internal qca8k PHY) model
+source "drivers/net/phy/qcom/Kconfig"
 
 config QSEMI_PHY
 	tristate "Quality Semiconductor PHYs"
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 6097afd443..197acfa0b4 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_ADIN_PHY)		+= adin.o
 obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
-obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 ifdef CONFIG_AX88796B_RUST_PHY
   obj-$(CONFIG_AX88796B_PHY)	+= ax88796b_rust.o
 else
@@ -91,6 +90,7 @@ endif
 obj-$(CONFIG_NXP_C45_TJA11XX_PHY)	+= nxp-c45-tja.o
 obj-$(CONFIG_NXP_CBTX_PHY)	+= nxp-cbtx.o
 obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
+obj-y				+= qcom/
 obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
 obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
 obj-$(CONFIG_RENESAS_PHY)	+= uPD60620.o
diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
index 7619d61858..85f910e2d4 100644
--- a/drivers/net/phy/adin1100.c
+++ b/drivers/net/phy/adin1100.c
@@ -18,6 +18,12 @@
 #define PHY_ID_ADIN1110				0x0283bc91
 #define PHY_ID_ADIN2111				0x0283bca1
 
+#define ADIN_PHY_SUBSYS_IRQ_MASK		0x0021
+#define   ADIN_LINK_STAT_CHNG_IRQ_EN		BIT(1)
+
+#define ADIN_PHY_SUBSYS_IRQ_STATUS		0x0011
+#define   ADIN_LINK_STAT_CHNG			BIT(1)
+
 #define ADIN_FORCED_MODE			0x8000
 #define   ADIN_FORCED_MODE_EN			BIT(0)
 
@@ -136,6 +142,53 @@ static int adin_config_aneg(struct phy_device *phydev)
 	return genphy_c45_config_aneg(phydev);
 }
 
+static int adin_phy_ack_intr(struct phy_device *phydev)
+{
+	/* Clear pending interrupts */
+	int rc = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+			      ADIN_PHY_SUBSYS_IRQ_STATUS);
+
+	return rc < 0 ? rc : 0;
+}
+
+static int adin_config_intr(struct phy_device *phydev)
+{
+	u16 irq_mask;
+	int ret;
+
+	ret = adin_phy_ack_intr(phydev);
+	if (ret)
+		return ret;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		irq_mask = ADIN_LINK_STAT_CHNG_IRQ_EN;
+	else
+		irq_mask = 0;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_VEND2,
+			      ADIN_PHY_SUBSYS_IRQ_MASK,
+			      ADIN_LINK_STAT_CHNG_IRQ_EN, irq_mask);
+}
+
+static irqreturn_t adin_phy_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+				  ADIN_PHY_SUBSYS_IRQ_STATUS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & ADIN_LINK_STAT_CHNG))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
 static int adin_set_powerdown_mode(struct phy_device *phydev, bool en)
 {
 	int ret;
@@ -275,6 +328,8 @@ static struct phy_driver adin_driver[] = {
 		.probe			= adin_probe,
 		.config_aneg		= adin_config_aneg,
 		.read_status		= adin_read_status,
+		.config_intr		= adin_config_intr,
+		.handle_interrupt	= adin_phy_handle_interrupt,
 		.set_loopback		= adin_set_loopback,
 		.suspend		= adin_suspend,
 		.resume			= adin_resume,
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 97a2fafa15..71bfddb8f4 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -22,9 +22,13 @@
 #define PHY_ID_AQR107	0x03a1b4e0
 #define PHY_ID_AQCS109	0x03a1b5c2
 #define PHY_ID_AQR405	0x03a1b4b0
+#define PHY_ID_AQR111	0x03a1b610
+#define PHY_ID_AQR111B0	0x03a1b612
 #define PHY_ID_AQR112	0x03a1b662
 #define PHY_ID_AQR412	0x03a1b712
+#define PHY_ID_AQR113	0x31c31c40
 #define PHY_ID_AQR113C	0x31c31c12
+#define PHY_ID_AQR813	0x31c31cb2
 
 #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
@@ -727,6 +731,15 @@ static int aqr113c_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
+	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS,
+				 MDIO_PMD_TXDIS_GLOBAL);
+	if (ret)
+		return ret;
+
+	ret = aqr107_wait_processor_intensive_op(phydev);
+	if (ret)
+		return ret;
+
 	return aqr107_fill_interface_modes(phydev);
 }
 
@@ -746,6 +759,16 @@ static int aqr107_probe(struct phy_device *phydev)
 	return aqr_hwmon_probe(phydev);
 }
 
+static int aqr111_config_init(struct phy_device *phydev)
+{
+	/* AQR111 reports supporting speed up to 10G,
+	 * however only speeds up to 5G are supported.
+	 */
+	phy_set_max_speed(phydev, SPEED_5000);
+
+	return aqr107_config_init(phydev);
+}
+
 static struct phy_driver aqr_driver[] = {
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
@@ -820,6 +843,44 @@ static struct phy_driver aqr_driver[] = {
 	.link_change_notify = aqr107_link_change_notify,
 },
 {
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
+	.name		= "Aquantia AQR111",
+	.probe		= aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init	= aqr111_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.handle_interrupt = aqr_handle_interrupt,
+	.read_status	= aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend	= aqr107_suspend,
+	.resume		= aqr107_resume,
+	.get_sset_count	= aqr107_get_sset_count,
+	.get_strings	= aqr107_get_strings,
+	.get_stats	= aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
+	.name		= "Aquantia AQR111B0",
+	.probe		= aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init	= aqr111_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.handle_interrupt = aqr_handle_interrupt,
+	.read_status	= aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend	= aqr107_suspend,
+	.resume		= aqr107_resume,
+	.get_sset_count	= aqr107_get_sset_count,
+	.get_strings	= aqr107_get_strings,
+	.get_stats	= aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+},
+{
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
 	.name		= "Aquantia AQR405",
 	.config_aneg    = aqr_config_aneg,
@@ -864,6 +925,25 @@ static struct phy_driver aqr_driver[] = {
 	.link_change_notify = aqr107_link_change_notify,
 },
 {
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
+	.name		= "Aquantia AQR113",
+	.probe          = aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init    = aqr113c_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr    = aqr_config_intr,
+	.handle_interrupt       = aqr_handle_interrupt,
+	.read_status    = aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend        = aqr107_suspend,
+	.resume         = aqr107_resume,
+	.get_sset_count = aqr107_get_sset_count,
+	.get_strings    = aqr107_get_strings,
+	.get_stats      = aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+},
+{
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
 	.name           = "Aquantia AQR113C",
 	.probe          = aqr107_probe,
@@ -882,6 +962,25 @@ static struct phy_driver aqr_driver[] = {
 	.get_stats      = aqr107_get_stats,
 	.link_change_notify = aqr107_link_change_notify,
 },
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
+	.name		= "Aquantia AQR813",
+	.probe		= aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init	= aqr107_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.handle_interrupt = aqr_handle_interrupt,
+	.read_status	= aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend	= aqr107_suspend,
+	.resume		= aqr107_resume,
+	.get_sset_count	= aqr107_get_sset_count,
+	.get_strings	= aqr107_get_strings,
+	.get_stats	= aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+},
 };
 
 module_phy_driver(aqr_driver);
@@ -894,9 +993,13 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR111) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
 	{ }
 };
 
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
deleted file mode 100644
index fdb89a505d..0000000000
--- a/drivers/net/phy/at803x.c
+++ /dev/null
@@ -1,2434 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * drivers/net/phy/at803x.c
- *
- * Driver for Qualcomm Atheros AR803x PHY
- *
- * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
- */
-
-#include <linux/phy.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool_netlink.h>
-#include <linux/bitfield.h>
-#include <linux/regulator/of_regulator.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/consumer.h>
-#include <linux/of.h>
-#include <linux/phylink.h>
-#include <linux/sfp.h>
-#include <dt-bindings/net/qca-ar803x.h>
-
-#define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
-#define AT803X_SFC_ASSERT_CRS			BIT(11)
-#define AT803X_SFC_FORCE_LINK			BIT(10)
-#define AT803X_SFC_MDI_CROSSOVER_MODE_M		GENMASK(6, 5)
-#define AT803X_SFC_AUTOMATIC_CROSSOVER		0x3
-#define AT803X_SFC_MANUAL_MDIX			0x1
-#define AT803X_SFC_MANUAL_MDI			0x0
-#define AT803X_SFC_SQE_TEST			BIT(2)
-#define AT803X_SFC_POLARITY_REVERSAL		BIT(1)
-#define AT803X_SFC_DISABLE_JABBER		BIT(0)
-
-#define AT803X_SPECIFIC_STATUS			0x11
-#define AT803X_SS_SPEED_MASK			GENMASK(15, 14)
-#define AT803X_SS_SPEED_1000			2
-#define AT803X_SS_SPEED_100			1
-#define AT803X_SS_SPEED_10			0
-#define AT803X_SS_DUPLEX			BIT(13)
-#define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
-#define AT803X_SS_MDIX				BIT(6)
-
-#define QCA808X_SS_SPEED_MASK			GENMASK(9, 7)
-#define QCA808X_SS_SPEED_2500			4
-
-#define AT803X_INTR_ENABLE			0x12
-#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
-#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
-#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
-#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
-#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
-#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
-#define AT803X_INTR_ENABLE_LINK_FAIL_BX		BIT(8)
-#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX	BIT(7)
-#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
-#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
-#define AT803X_INTR_ENABLE_WOL			BIT(0)
-
-#define AT803X_INTR_STATUS			0x13
-
-#define AT803X_SMART_SPEED			0x14
-#define AT803X_SMART_SPEED_ENABLE		BIT(5)
-#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK	GENMASK(4, 2)
-#define AT803X_SMART_SPEED_BYPASS_TIMER		BIT(1)
-#define AT803X_CDT				0x16
-#define AT803X_CDT_MDI_PAIR_MASK		GENMASK(9, 8)
-#define AT803X_CDT_ENABLE_TEST			BIT(0)
-#define AT803X_CDT_STATUS			0x1c
-#define AT803X_CDT_STATUS_STAT_NORMAL		0
-#define AT803X_CDT_STATUS_STAT_SHORT		1
-#define AT803X_CDT_STATUS_STAT_OPEN		2
-#define AT803X_CDT_STATUS_STAT_FAIL		3
-#define AT803X_CDT_STATUS_STAT_MASK		GENMASK(9, 8)
-#define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
-#define AT803X_LED_CONTROL			0x18
-
-#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
-#define AT803X_WOL_EN				BIT(5)
-#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
-#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
-#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-#define AT803X_REG_CHIP_CONFIG			0x1f
-#define AT803X_BT_BX_REG_SEL			0x8000
-
-#define AT803X_DEBUG_ADDR			0x1D
-#define AT803X_DEBUG_DATA			0x1E
-
-#define AT803X_MODE_CFG_MASK			0x0F
-#define AT803X_MODE_CFG_BASET_RGMII		0x00
-#define AT803X_MODE_CFG_BASET_SGMII		0x01
-#define AT803X_MODE_CFG_BX1000_RGMII_50OHM	0x02
-#define AT803X_MODE_CFG_BX1000_RGMII_75OHM	0x03
-#define AT803X_MODE_CFG_BX1000_CONV_50OHM	0x04
-#define AT803X_MODE_CFG_BX1000_CONV_75OHM	0x05
-#define AT803X_MODE_CFG_FX100_RGMII_50OHM	0x06
-#define AT803X_MODE_CFG_FX100_CONV_50OHM	0x07
-#define AT803X_MODE_CFG_RGMII_AUTO_MDET		0x0B
-#define AT803X_MODE_CFG_FX100_RGMII_75OHM	0x0E
-#define AT803X_MODE_CFG_FX100_CONV_75OHM	0x0F
-
-#define AT803X_PSSR				0x11	/*PHY-Specific Status Register*/
-#define AT803X_PSSR_MR_AN_COMPLETE		0x0200
-
-#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
-#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
-#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
-#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
-
-#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
-#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
-
-#define AT803X_DEBUG_REG_HIB_CTRL		0x0b
-#define   AT803X_DEBUG_HIB_CTRL_SEL_RST_80U	BIT(10)
-#define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
-#define   AT803X_DEBUG_HIB_CTRL_PS_HIB_EN	BIT(15)
-
-#define AT803X_DEBUG_REG_3C			0x3C
-
-#define AT803X_DEBUG_REG_GREEN			0x3D
-#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
-
-#define AT803X_DEBUG_REG_1F			0x1F
-#define AT803X_DEBUG_PLL_ON			BIT(2)
-#define AT803X_DEBUG_RGMII_1V8			BIT(3)
-
-#define MDIO_AZ_DEBUG				0x800D
-
-/* AT803x supports either the XTAL input pad, an internal PLL or the
- * DSP as clock reference for the clock output pad. The XTAL reference
- * is only used for 25 MHz output, all other frequencies need the PLL.
- * The DSP as a clock reference is used in synchronous ethernet
- * applications.
- *
- * By default the PLL is only enabled if there is a link. Otherwise
- * the PHY will go into low power state and disabled the PLL. You can
- * set the PLL_ON bit (see debug register 0x1f) to keep the PLL always
- * enabled.
- */
-#define AT803X_MMD7_CLK25M			0x8016
-#define AT803X_CLK_OUT_MASK			GENMASK(4, 2)
-#define AT803X_CLK_OUT_25MHZ_XTAL		0
-#define AT803X_CLK_OUT_25MHZ_DSP		1
-#define AT803X_CLK_OUT_50MHZ_PLL		2
-#define AT803X_CLK_OUT_50MHZ_DSP		3
-#define AT803X_CLK_OUT_62_5MHZ_PLL		4
-#define AT803X_CLK_OUT_62_5MHZ_DSP		5
-#define AT803X_CLK_OUT_125MHZ_PLL		6
-#define AT803X_CLK_OUT_125MHZ_DSP		7
-
-/* The AR8035 has another mask which is compatible with the AR8031/AR8033 mask
- * but doesn't support choosing between XTAL/PLL and DSP.
- */
-#define AT8035_CLK_OUT_MASK			GENMASK(4, 3)
-
-#define AT803X_CLK_OUT_STRENGTH_MASK		GENMASK(8, 7)
-#define AT803X_CLK_OUT_STRENGTH_FULL		0
-#define AT803X_CLK_OUT_STRENGTH_HALF		1
-#define AT803X_CLK_OUT_STRENGTH_QUARTER		2
-
-#define AT803X_DEFAULT_DOWNSHIFT		5
-#define AT803X_MIN_DOWNSHIFT			2
-#define AT803X_MAX_DOWNSHIFT			9
-
-#define AT803X_MMD3_SMARTEEE_CTL1		0x805b
-#define AT803X_MMD3_SMARTEEE_CTL2		0x805c
-#define AT803X_MMD3_SMARTEEE_CTL3		0x805d
-#define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN	BIT(8)
-
-#define ATH9331_PHY_ID				0x004dd041
-#define ATH8030_PHY_ID				0x004dd076
-#define ATH8031_PHY_ID				0x004dd074
-#define ATH8032_PHY_ID				0x004dd023
-#define ATH8035_PHY_ID				0x004dd072
-#define AT8030_PHY_ID_MASK			0xffffffef
-
-#define QCA8081_PHY_ID				0x004dd101
-
-#define QCA8327_A_PHY_ID			0x004dd033
-#define QCA8327_B_PHY_ID			0x004dd034
-#define QCA8337_PHY_ID				0x004dd036
-#define QCA9561_PHY_ID				0x004dd042
-#define QCA8K_PHY_ID_MASK			0xffffffff
-
-#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
-
-#define AT803X_PAGE_FIBER			0
-#define AT803X_PAGE_COPPER			1
-
-/* don't turn off internal PLL */
-#define AT803X_KEEP_PLL_ENABLED			BIT(0)
-#define AT803X_DISABLE_SMARTEEE			BIT(1)
-
-/* disable hibernation mode */
-#define AT803X_DISABLE_HIBERNATION_MODE		BIT(2)
-
-/* ADC threshold */
-#define QCA808X_PHY_DEBUG_ADC_THRESHOLD		0x2c80
-#define QCA808X_ADC_THRESHOLD_MASK		GENMASK(7, 0)
-#define QCA808X_ADC_THRESHOLD_80MV		0
-#define QCA808X_ADC_THRESHOLD_100MV		0xf0
-#define QCA808X_ADC_THRESHOLD_200MV		0x0f
-#define QCA808X_ADC_THRESHOLD_300MV		0xff
-
-/* CLD control */
-#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7		0x8007
-#define QCA808X_8023AZ_AFE_CTRL_MASK		GENMASK(8, 4)
-#define QCA808X_8023AZ_AFE_EN			0x90
-
-/* AZ control */
-#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL	0x8008
-#define QCA808X_MMD3_AZ_TRAINING_VAL		0x1c32
-
-#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB	0x8014
-#define QCA808X_MSE_THRESHOLD_20DB_VALUE	0x529
-
-#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB	0x800E
-#define QCA808X_MSE_THRESHOLD_17DB_VALUE	0x341
-
-#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB	0x801E
-#define QCA808X_MSE_THRESHOLD_27DB_VALUE	0x419
-
-#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB	0x8020
-#define QCA808X_MSE_THRESHOLD_28DB_VALUE	0x341
-
-#define QCA808X_PHY_MMD7_TOP_OPTION1		0x901c
-#define QCA808X_TOP_OPTION1_DATA		0x0
-
-#define QCA808X_PHY_MMD3_DEBUG_1		0xa100
-#define QCA808X_MMD3_DEBUG_1_VALUE		0x9203
-#define QCA808X_PHY_MMD3_DEBUG_2		0xa101
-#define QCA808X_MMD3_DEBUG_2_VALUE		0x48ad
-#define QCA808X_PHY_MMD3_DEBUG_3		0xa103
-#define QCA808X_MMD3_DEBUG_3_VALUE		0x1698
-#define QCA808X_PHY_MMD3_DEBUG_4		0xa105
-#define QCA808X_MMD3_DEBUG_4_VALUE		0x8001
-#define QCA808X_PHY_MMD3_DEBUG_5		0xa106
-#define QCA808X_MMD3_DEBUG_5_VALUE		0x1111
-#define QCA808X_PHY_MMD3_DEBUG_6		0xa011
-#define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
-
-/* master/slave seed config */
-#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
-#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
-#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
-#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
-
-/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
- * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
- */
-#define QCA808X_DBG_AN_TEST			0xb
-#define QCA808X_HIBERNATION_EN			BIT(15)
-
-#define QCA808X_CDT_ENABLE_TEST			BIT(15)
-#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
-#define QCA808X_CDT_STATUS			BIT(11)
-#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
-
-#define QCA808X_MMD3_CDT_STATUS			0x8064
-#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
-#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
-#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
-#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
-#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
-#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
-
-#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
-#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
-#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
-#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
-
-#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
-#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
-#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
-#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
-#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
-
-#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
-#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
-#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
-#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
-
-/* NORMAL are MDI with type set to 0 */
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-									 QCA808X_CDT_STATUS_STAT_MDI1)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-									 QCA808X_CDT_STATUS_STAT_MDI1)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-									 QCA808X_CDT_STATUS_STAT_MDI2)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-									 QCA808X_CDT_STATUS_STAT_MDI2)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-									 QCA808X_CDT_STATUS_STAT_MDI3)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-									 QCA808X_CDT_STATUS_STAT_MDI3)
-
-/* Added for reference of existence but should be handled by wait_for_completion already */
-#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
-
-/* QCA808X 1G chip type */
-#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
-#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
-
-#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
-#define QCA8081_PHY_FIFO_RSTN			BIT(11)
-
-MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
-MODULE_AUTHOR("Matus Ujhelyi");
-MODULE_LICENSE("GPL");
-
-enum stat_access_type {
-	PHY,
-	MMD
-};
-
-struct at803x_hw_stat {
-	const char *string;
-	u8 reg;
-	u32 mask;
-	enum stat_access_type access_type;
-};
-
-static struct at803x_hw_stat qca83xx_hw_stats[] = {
-	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
-	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
-	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
-};
-
-struct at803x_ss_mask {
-	u16 speed_mask;
-	u8 speed_shift;
-};
-
-struct at803x_priv {
-	int flags;
-	u16 clk_25m_reg;
-	u16 clk_25m_mask;
-	u8 smarteee_lpi_tw_1g;
-	u8 smarteee_lpi_tw_100m;
-	bool is_fiber;
-	bool is_1000basex;
-	struct regulator_dev *vddio_rdev;
-	struct regulator_dev *vddh_rdev;
-	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
-};
-
-struct at803x_context {
-	u16 bmcr;
-	u16 advertise;
-	u16 control1000;
-	u16 int_enable;
-	u16 smart_speed;
-	u16 led_control;
-};
-
-static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
-{
-	int ret;
-
-	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
-	if (ret < 0)
-		return ret;
-
-	return phy_write(phydev, AT803X_DEBUG_DATA, data);
-}
-
-static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
-{
-	int ret;
-
-	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
-	if (ret < 0)
-		return ret;
-
-	return phy_read(phydev, AT803X_DEBUG_DATA);
-}
-
-static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
-				 u16 clear, u16 set)
-{
-	u16 val;
-	int ret;
-
-	ret = at803x_debug_reg_read(phydev, reg);
-	if (ret < 0)
-		return ret;
-
-	val = ret & 0xffff;
-	val &= ~clear;
-	val |= set;
-
-	return phy_write(phydev, AT803X_DEBUG_DATA, val);
-}
-
-static int at803x_write_page(struct phy_device *phydev, int page)
-{
-	int mask;
-	int set;
-
-	if (page == AT803X_PAGE_COPPER) {
-		set = AT803X_BT_BX_REG_SEL;
-		mask = 0;
-	} else {
-		set = 0;
-		mask = AT803X_BT_BX_REG_SEL;
-	}
-
-	return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set);
-}
-
-static int at803x_read_page(struct phy_device *phydev)
-{
-	int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-
-	if (ccr < 0)
-		return ccr;
-
-	if (ccr & AT803X_BT_BX_REG_SEL)
-		return AT803X_PAGE_COPPER;
-
-	return AT803X_PAGE_FIBER;
-}
-
-static int at803x_enable_rx_delay(struct phy_device *phydev)
-{
-	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0,
-				     AT803X_DEBUG_RX_CLK_DLY_EN);
-}
-
-static int at803x_enable_tx_delay(struct phy_device *phydev)
-{
-	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0,
-				     AT803X_DEBUG_TX_CLK_DLY_EN);
-}
-
-static int at803x_disable_rx_delay(struct phy_device *phydev)
-{
-	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-				     AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-}
-
-static int at803x_disable_tx_delay(struct phy_device *phydev)
-{
-	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE,
-				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-}
-
-/* save relevant PHY registers to private copy */
-static void at803x_context_save(struct phy_device *phydev,
-				struct at803x_context *context)
-{
-	context->bmcr = phy_read(phydev, MII_BMCR);
-	context->advertise = phy_read(phydev, MII_ADVERTISE);
-	context->control1000 = phy_read(phydev, MII_CTRL1000);
-	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
-	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
-	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
-}
-
-/* restore relevant PHY registers from private copy */
-static void at803x_context_restore(struct phy_device *phydev,
-				   const struct at803x_context *context)
-{
-	phy_write(phydev, MII_BMCR, context->bmcr);
-	phy_write(phydev, MII_ADVERTISE, context->advertise);
-	phy_write(phydev, MII_CTRL1000, context->control1000);
-	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
-	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
-	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
-}
-
-static int at803x_set_wol(struct phy_device *phydev,
-			  struct ethtool_wolinfo *wol)
-{
-	int ret, irq_enabled;
-
-	if (wol->wolopts & WAKE_MAGIC) {
-		struct net_device *ndev = phydev->attached_dev;
-		const u8 *mac;
-		unsigned int i;
-		static const unsigned int offsets[] = {
-			AT803X_LOC_MAC_ADDR_32_47_OFFSET,
-			AT803X_LOC_MAC_ADDR_16_31_OFFSET,
-			AT803X_LOC_MAC_ADDR_0_15_OFFSET,
-		};
-
-		if (!ndev)
-			return -ENODEV;
-
-		mac = (const u8 *)ndev->dev_addr;
-
-		if (!is_valid_ether_addr(mac))
-			return -EINVAL;
-
-		for (i = 0; i < 3; i++)
-			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
-				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
-
-		/* Enable WOL interrupt */
-		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
-		if (ret)
-			return ret;
-	} else {
-		/* Disable WOL interrupt */
-		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
-		if (ret)
-			return ret;
-	}
-
-	/* Clear WOL status */
-	ret = phy_read(phydev, AT803X_INTR_STATUS);
-	if (ret < 0)
-		return ret;
-
-	/* Check if there are other interrupts except for WOL triggered when PHY is
-	 * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
-	 * be passed up to the interrupt PIN.
-	 */
-	irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
-	if (irq_enabled < 0)
-		return irq_enabled;
-
-	irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
-	if (ret & irq_enabled && !phy_polling_mode(phydev))
-		phy_trigger_machine(phydev);
-
-	return 0;
-}
-
-static void at803x_get_wol(struct phy_device *phydev,
-			   struct ethtool_wolinfo *wol)
-{
-	int value;
-
-	wol->supported = WAKE_MAGIC;
-	wol->wolopts = 0;
-
-	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	if (value < 0)
-		return;
-
-	if (value & AT803X_INTR_ENABLE_WOL)
-		wol->wolopts |= WAKE_MAGIC;
-}
-
-static int qca83xx_get_sset_count(struct phy_device *phydev)
-{
-	return ARRAY_SIZE(qca83xx_hw_stats);
-}
-
-static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
-		strscpy(data + i * ETH_GSTRING_LEN,
-			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
-	}
-}
-
-static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
-{
-	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
-	struct at803x_priv *priv = phydev->priv;
-	int val;
-	u64 ret;
-
-	if (stat.access_type == MMD)
-		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
-	else
-		val = phy_read(phydev, stat.reg);
-
-	if (val < 0) {
-		ret = U64_MAX;
-	} else {
-		val = val & stat.mask;
-		priv->stats[i] += val;
-		ret = priv->stats[i];
-	}
-
-	return ret;
-}
-
-static void qca83xx_get_stats(struct phy_device *phydev,
-			      struct ethtool_stats *stats, u64 *data)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
-		data[i] = qca83xx_get_stat(phydev, i);
-}
-
-static int at803x_suspend(struct phy_device *phydev)
-{
-	int value;
-	int wol_enabled;
-
-	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	wol_enabled = value & AT803X_INTR_ENABLE_WOL;
-
-	if (wol_enabled)
-		value = BMCR_ISOLATE;
-	else
-		value = BMCR_PDOWN;
-
-	phy_modify(phydev, MII_BMCR, 0, value);
-
-	return 0;
-}
-
-static int at803x_resume(struct phy_device *phydev)
-{
-	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
-}
-
-static int at803x_parse_dt(struct phy_device *phydev)
-{
-	struct device_node *node = phydev->mdio.dev.of_node;
-	struct at803x_priv *priv = phydev->priv;
-	u32 freq, strength, tw;
-	unsigned int sel;
-	int ret;
-
-	if (!IS_ENABLED(CONFIG_OF_MDIO))
-		return 0;
-
-	if (of_property_read_bool(node, "qca,disable-smarteee"))
-		priv->flags |= AT803X_DISABLE_SMARTEEE;
-
-	if (of_property_read_bool(node, "qca,disable-hibernation-mode"))
-		priv->flags |= AT803X_DISABLE_HIBERNATION_MODE;
-
-	if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) {
-		if (!tw || tw > 255) {
-			phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n");
-			return -EINVAL;
-		}
-		priv->smarteee_lpi_tw_1g = tw;
-	}
-
-	if (!of_property_read_u32(node, "qca,smarteee-tw-us-100m", &tw)) {
-		if (!tw || tw > 255) {
-			phydev_err(phydev, "invalid qca,smarteee-tw-us-100m\n");
-			return -EINVAL;
-		}
-		priv->smarteee_lpi_tw_100m = tw;
-	}
-
-	ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq);
-	if (!ret) {
-		switch (freq) {
-		case 25000000:
-			sel = AT803X_CLK_OUT_25MHZ_XTAL;
-			break;
-		case 50000000:
-			sel = AT803X_CLK_OUT_50MHZ_PLL;
-			break;
-		case 62500000:
-			sel = AT803X_CLK_OUT_62_5MHZ_PLL;
-			break;
-		case 125000000:
-			sel = AT803X_CLK_OUT_125MHZ_PLL;
-			break;
-		default:
-			phydev_err(phydev, "invalid qca,clk-out-frequency\n");
-			return -EINVAL;
-		}
-
-		priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel);
-		priv->clk_25m_mask |= AT803X_CLK_OUT_MASK;
-	}
-
-	ret = of_property_read_u32(node, "qca,clk-out-strength", &strength);
-	if (!ret) {
-		priv->clk_25m_mask |= AT803X_CLK_OUT_STRENGTH_MASK;
-		switch (strength) {
-		case AR803X_STRENGTH_FULL:
-			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_FULL;
-			break;
-		case AR803X_STRENGTH_HALF:
-			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_HALF;
-			break;
-		case AR803X_STRENGTH_QUARTER:
-			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_QUARTER;
-			break;
-		default:
-			phydev_err(phydev, "invalid qca,clk-out-strength\n");
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static int at803x_probe(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	struct at803x_priv *priv;
-	int ret;
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	phydev->priv = priv;
-
-	ret = at803x_parse_dt(phydev);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int at803x_get_features(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-	int err;
-
-	err = genphy_read_abilities(phydev);
-	if (err)
-		return err;
-
-	if (phydev->drv->phy_id != ATH8031_PHY_ID)
-		return 0;
-
-	/* AR8031/AR8033 have different status registers
-	 * for copper and fiber operation. However, the
-	 * extended status register is the same for both
-	 * operation modes.
-	 *
-	 * As a result of that, ESTATUS_1000_XFULL is set
-	 * to 1 even when operating in copper TP mode.
-	 *
-	 * Remove this mode from the supported link modes
-	 * when not operating in 1000BaseX mode.
-	 */
-	if (!priv->is_1000basex)
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-				   phydev->supported);
-
-	return 0;
-}
-
-static int at803x_smarteee_config(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-	u16 mask = 0, val = 0;
-	int ret;
-
-	if (priv->flags & AT803X_DISABLE_SMARTEEE)
-		return phy_modify_mmd(phydev, MDIO_MMD_PCS,
-				      AT803X_MMD3_SMARTEEE_CTL3,
-				      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, 0);
-
-	if (priv->smarteee_lpi_tw_1g) {
-		mask |= 0xff00;
-		val |= priv->smarteee_lpi_tw_1g << 8;
-	}
-	if (priv->smarteee_lpi_tw_100m) {
-		mask |= 0x00ff;
-		val |= priv->smarteee_lpi_tw_100m;
-	}
-	if (!mask)
-		return 0;
-
-	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL1,
-			     mask, val);
-	if (ret)
-		return ret;
-
-	return phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL3,
-			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN,
-			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN);
-}
-
-static int at803x_clk_out_config(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-
-	if (!priv->clk_25m_mask)
-		return 0;
-
-	return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M,
-			      priv->clk_25m_mask, priv->clk_25m_reg);
-}
-
-static int at8031_pll_config(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-
-	/* The default after hardware reset is PLL OFF. After a soft reset, the
-	 * values are retained.
-	 */
-	if (priv->flags & AT803X_KEEP_PLL_ENABLED)
-		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-					     0, AT803X_DEBUG_PLL_ON);
-	else
-		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-					     AT803X_DEBUG_PLL_ON, 0);
-}
-
-static int at803x_hibernation_mode_config(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-
-	/* The default after hardware reset is hibernation mode enabled. After
-	 * software reset, the value is retained.
-	 */
-	if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE))
-		return 0;
-
-	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
-					 AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0);
-}
-
-static int at803x_config_init(struct phy_device *phydev)
-{
-	int ret;
-
-	/* The RX and TX delay default is:
-	 *   after HW reset: RX delay enabled and TX delay disabled
-	 *   after SW reset: RX delay enabled, while TX delay retains the
-	 *   value before reset.
-	 */
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
-		ret = at803x_enable_rx_delay(phydev);
-	else
-		ret = at803x_disable_rx_delay(phydev);
-	if (ret < 0)
-		return ret;
-
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-		ret = at803x_enable_tx_delay(phydev);
-	else
-		ret = at803x_disable_tx_delay(phydev);
-	if (ret < 0)
-		return ret;
-
-	ret = at803x_smarteee_config(phydev);
-	if (ret < 0)
-		return ret;
-
-	ret = at803x_clk_out_config(phydev);
-	if (ret < 0)
-		return ret;
-
-	ret = at803x_hibernation_mode_config(phydev);
-	if (ret < 0)
-		return ret;
-
-	/* Ar803x extended next page bit is enabled by default. Cisco
-	 * multigig switches read this bit and attempt to negotiate 10Gbps
-	 * rates even if the next page bit is disabled. This is incorrect
-	 * behaviour but we still need to accommodate it. XNP is only needed
-	 * for 10Gbps support, so disable XNP.
-	 */
-	return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0);
-}
-
-static int at803x_ack_interrupt(struct phy_device *phydev)
-{
-	int err;
-
-	err = phy_read(phydev, AT803X_INTR_STATUS);
-
-	return (err < 0) ? err : 0;
-}
-
-static int at803x_config_intr(struct phy_device *phydev)
-{
-	int err;
-	int value;
-
-	value = phy_read(phydev, AT803X_INTR_ENABLE);
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-		/* Clear any pending interrupts */
-		err = at803x_ack_interrupt(phydev);
-		if (err)
-			return err;
-
-		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
-		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
-		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
-		value |= AT803X_INTR_ENABLE_LINK_FAIL;
-		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
-
-		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
-	} else {
-		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
-		if (err)
-			return err;
-
-		/* Clear any pending interrupts */
-		err = at803x_ack_interrupt(phydev);
-	}
-
-	return err;
-}
-
-static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
-{
-	int irq_status, int_enabled;
-
-	irq_status = phy_read(phydev, AT803X_INTR_STATUS);
-	if (irq_status < 0) {
-		phy_error(phydev);
-		return IRQ_NONE;
-	}
-
-	/* Read the current enabled interrupts */
-	int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
-	if (int_enabled < 0) {
-		phy_error(phydev);
-		return IRQ_NONE;
-	}
-
-	/* See if this was one of our enabled interrupts */
-	if (!(irq_status & int_enabled))
-		return IRQ_NONE;
-
-	phy_trigger_machine(phydev);
-
-	return IRQ_HANDLED;
-}
-
-static void at803x_link_change_notify(struct phy_device *phydev)
-{
-	/*
-	 * Conduct a hardware reset for AT8030 every time a link loss is
-	 * signalled. This is necessary to circumvent a hardware bug that
-	 * occurs when the cable is unplugged while TX packets are pending
-	 * in the FIFO. In such cases, the FIFO enters an error mode it
-	 * cannot recover from by software.
-	 */
-	if (phydev->state == PHY_NOLINK && phydev->mdio.reset_gpio) {
-		struct at803x_context context;
-
-		at803x_context_save(phydev, &context);
-
-		phy_device_reset(phydev, 1);
-		usleep_range(1000, 2000);
-		phy_device_reset(phydev, 0);
-		usleep_range(1000, 2000);
-
-		at803x_context_restore(phydev, &context);
-
-		phydev_dbg(phydev, "%s(): phy was reset\n", __func__);
-	}
-}
-
-static int at803x_read_specific_status(struct phy_device *phydev,
-				       struct at803x_ss_mask ss_mask)
-{
-	int ss;
-
-	/* Read the AT8035 PHY-Specific Status register, which indicates the
-	 * speed and duplex that the PHY is actually using, irrespective of
-	 * whether we are in autoneg mode or not.
-	 */
-	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
-	if (ss < 0)
-		return ss;
-
-	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
-		int sfc, speed;
-
-		sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
-		if (sfc < 0)
-			return sfc;
-
-		speed = ss & ss_mask.speed_mask;
-		speed >>= ss_mask.speed_shift;
-
-		switch (speed) {
-		case AT803X_SS_SPEED_10:
-			phydev->speed = SPEED_10;
-			break;
-		case AT803X_SS_SPEED_100:
-			phydev->speed = SPEED_100;
-			break;
-		case AT803X_SS_SPEED_1000:
-			phydev->speed = SPEED_1000;
-			break;
-		case QCA808X_SS_SPEED_2500:
-			phydev->speed = SPEED_2500;
-			break;
-		}
-		if (ss & AT803X_SS_DUPLEX)
-			phydev->duplex = DUPLEX_FULL;
-		else
-			phydev->duplex = DUPLEX_HALF;
-
-		if (ss & AT803X_SS_MDIX)
-			phydev->mdix = ETH_TP_MDI_X;
-		else
-			phydev->mdix = ETH_TP_MDI;
-
-		switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) {
-		case AT803X_SFC_MANUAL_MDI:
-			phydev->mdix_ctrl = ETH_TP_MDI;
-			break;
-		case AT803X_SFC_MANUAL_MDIX:
-			phydev->mdix_ctrl = ETH_TP_MDI_X;
-			break;
-		case AT803X_SFC_AUTOMATIC_CROSSOVER:
-			phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int at803x_read_status(struct phy_device *phydev)
-{
-	struct at803x_ss_mask ss_mask = { 0 };
-	int err, old_link = phydev->link;
-
-	/* Update the link, but return if there was an error */
-	err = genphy_update_link(phydev);
-	if (err)
-		return err;
-
-	/* why bother the PHY if nothing can have changed */
-	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-		return 0;
-
-	phydev->speed = SPEED_UNKNOWN;
-	phydev->duplex = DUPLEX_UNKNOWN;
-	phydev->pause = 0;
-	phydev->asym_pause = 0;
-
-	err = genphy_read_lpa(phydev);
-	if (err < 0)
-		return err;
-
-	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
-	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
-	err = at803x_read_specific_status(phydev, ss_mask);
-	if (err < 0)
-		return err;
-
-	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
-		phy_resolve_aneg_pause(phydev);
-
-	return 0;
-}
-
-static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
-{
-	u16 val;
-
-	switch (ctrl) {
-	case ETH_TP_MDI:
-		val = AT803X_SFC_MANUAL_MDI;
-		break;
-	case ETH_TP_MDI_X:
-		val = AT803X_SFC_MANUAL_MDIX;
-		break;
-	case ETH_TP_MDI_AUTO:
-		val = AT803X_SFC_AUTOMATIC_CROSSOVER;
-		break;
-	default:
-		return 0;
-	}
-
-	return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL,
-			  AT803X_SFC_MDI_CROSSOVER_MODE_M,
-			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
-}
-
-static int at803x_prepare_config_aneg(struct phy_device *phydev)
-{
-	int ret;
-
-	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
-	if (ret < 0)
-		return ret;
-
-	/* Changes of the midx bits are disruptive to the normal operation;
-	 * therefore any changes to these registers must be followed by a
-	 * software reset to take effect.
-	 */
-	if (ret == 1) {
-		ret = genphy_soft_reset(phydev);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int at803x_config_aneg(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-	int ret;
-
-	ret = at803x_prepare_config_aneg(phydev);
-	if (ret)
-		return ret;
-
-	if (priv->is_1000basex)
-		return genphy_c37_config_aneg(phydev);
-
-	return genphy_config_aneg(phydev);
-}
-
-static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
-{
-	int val;
-
-	val = phy_read(phydev, AT803X_SMART_SPEED);
-	if (val < 0)
-		return val;
-
-	if (val & AT803X_SMART_SPEED_ENABLE)
-		*d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2;
-	else
-		*d = DOWNSHIFT_DEV_DISABLE;
-
-	return 0;
-}
-
-static int at803x_set_downshift(struct phy_device *phydev, u8 cnt)
-{
-	u16 mask, set;
-	int ret;
-
-	switch (cnt) {
-	case DOWNSHIFT_DEV_DEFAULT_COUNT:
-		cnt = AT803X_DEFAULT_DOWNSHIFT;
-		fallthrough;
-	case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT:
-		set = AT803X_SMART_SPEED_ENABLE |
-		      AT803X_SMART_SPEED_BYPASS_TIMER |
-		      FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2);
-		mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK;
-		break;
-	case DOWNSHIFT_DEV_DISABLE:
-		set = 0;
-		mask = AT803X_SMART_SPEED_ENABLE |
-		       AT803X_SMART_SPEED_BYPASS_TIMER;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set);
-
-	/* After changing the smart speed settings, we need to perform a
-	 * software reset, use phy_init_hw() to make sure we set the
-	 * reapply any values which might got lost during software reset.
-	 */
-	if (ret == 1)
-		ret = phy_init_hw(phydev);
-
-	return ret;
-}
-
-static int at803x_get_tunable(struct phy_device *phydev,
-			      struct ethtool_tunable *tuna, void *data)
-{
-	switch (tuna->id) {
-	case ETHTOOL_PHY_DOWNSHIFT:
-		return at803x_get_downshift(phydev, data);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static int at803x_set_tunable(struct phy_device *phydev,
-			      struct ethtool_tunable *tuna, const void *data)
-{
-	switch (tuna->id) {
-	case ETHTOOL_PHY_DOWNSHIFT:
-		return at803x_set_downshift(phydev, *(const u8 *)data);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static int at803x_cable_test_result_trans(u16 status)
-{
-	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
-	case AT803X_CDT_STATUS_STAT_NORMAL:
-		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
-	case AT803X_CDT_STATUS_STAT_SHORT:
-		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
-	case AT803X_CDT_STATUS_STAT_OPEN:
-		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
-	case AT803X_CDT_STATUS_STAT_FAIL:
-	default:
-		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
-	}
-}
-
-static bool at803x_cdt_test_failed(u16 status)
-{
-	return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) ==
-		AT803X_CDT_STATUS_STAT_FAIL;
-}
-
-static bool at803x_cdt_fault_length_valid(u16 status)
-{
-	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
-	case AT803X_CDT_STATUS_STAT_OPEN:
-	case AT803X_CDT_STATUS_STAT_SHORT:
-		return true;
-	}
-	return false;
-}
-
-static int at803x_cdt_fault_length(int dt)
-{
-	/* According to the datasheet the distance to the fault is
-	 * DELTA_TIME * 0.824 meters.
-	 *
-	 * The author suspect the correct formula is:
-	 *
-	 *   fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2
-	 *
-	 * where c is the speed of light, VF is the velocity factor of
-	 * the twisted pair cable, 125MHz the counter frequency and
-	 * we need to divide by 2 because the hardware will measure the
-	 * round trip time to the fault and back to the PHY.
-	 *
-	 * With a VF of 0.69 we get the factor 0.824 mentioned in the
-	 * datasheet.
-	 */
-	return (dt * 824) / 10;
-}
-
-static int at803x_cdt_start(struct phy_device *phydev,
-			    u32 cdt_start)
-{
-	return phy_write(phydev, AT803X_CDT, cdt_start);
-}
-
-static int at803x_cdt_wait_for_completion(struct phy_device *phydev,
-					  u32 cdt_en)
-{
-	int val, ret;
-
-	/* One test run takes about 25ms */
-	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
-				    !(val & cdt_en),
-				    30000, 100000, true);
-
-	return ret < 0 ? ret : 0;
-}
-
-static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
-{
-	static const int ethtool_pair[] = {
-		ETHTOOL_A_CABLE_PAIR_A,
-		ETHTOOL_A_CABLE_PAIR_B,
-		ETHTOOL_A_CABLE_PAIR_C,
-		ETHTOOL_A_CABLE_PAIR_D,
-	};
-	int ret, val;
-
-	val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
-	      AT803X_CDT_ENABLE_TEST;
-	ret = at803x_cdt_start(phydev, val);
-	if (ret)
-		return ret;
-
-	ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST);
-	if (ret)
-		return ret;
-
-	val = phy_read(phydev, AT803X_CDT_STATUS);
-	if (val < 0)
-		return val;
-
-	if (at803x_cdt_test_failed(val))
-		return 0;
-
-	ethnl_cable_test_result(phydev, ethtool_pair[pair],
-				at803x_cable_test_result_trans(val));
-
-	if (at803x_cdt_fault_length_valid(val)) {
-		val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val);
-		ethnl_cable_test_fault_length(phydev, ethtool_pair[pair],
-					      at803x_cdt_fault_length(val));
-	}
-
-	return 1;
-}
-
-static int at803x_cable_test_get_status(struct phy_device *phydev,
-					bool *finished, unsigned long pair_mask)
-{
-	int retries = 20;
-	int pair, ret;
-
-	*finished = false;
-
-	/* According to the datasheet the CDT can be performed when
-	 * there is no link partner or when the link partner is
-	 * auto-negotiating. Starting the test will restart the AN
-	 * automatically. It seems that doing this repeatedly we will
-	 * get a slot where our link partner won't disturb our
-	 * measurement.
-	 */
-	while (pair_mask && retries--) {
-		for_each_set_bit(pair, &pair_mask, 4) {
-			ret = at803x_cable_test_one_pair(phydev, pair);
-			if (ret < 0)
-				return ret;
-			if (ret)
-				clear_bit(pair, &pair_mask);
-		}
-		if (pair_mask)
-			msleep(250);
-	}
-
-	*finished = true;
-
-	return 0;
-}
-
-static void at803x_cable_test_autoneg(struct phy_device *phydev)
-{
-	/* Enable auto-negotiation, but advertise no capabilities, no link
-	 * will be established. A restart of the auto-negotiation is not
-	 * required, because the cable test will automatically break the link.
-	 */
-	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
-	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
-}
-
-static int at803x_cable_test_start(struct phy_device *phydev)
-{
-	at803x_cable_test_autoneg(phydev);
-	/* we do all the (time consuming) work later */
-	return 0;
-}
-
-static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
-					    unsigned int selector)
-{
-	struct phy_device *phydev = rdev_get_drvdata(rdev);
-
-	if (selector)
-		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-					     0, AT803X_DEBUG_RGMII_1V8);
-	else
-		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-					     AT803X_DEBUG_RGMII_1V8, 0);
-}
-
-static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
-{
-	struct phy_device *phydev = rdev_get_drvdata(rdev);
-	int val;
-
-	val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F);
-	if (val < 0)
-		return val;
-
-	return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0;
-}
-
-static const struct regulator_ops vddio_regulator_ops = {
-	.list_voltage = regulator_list_voltage_table,
-	.set_voltage_sel = at8031_rgmii_reg_set_voltage_sel,
-	.get_voltage_sel = at8031_rgmii_reg_get_voltage_sel,
-};
-
-static const unsigned int vddio_voltage_table[] = {
-	1500000,
-	1800000,
-};
-
-static const struct regulator_desc vddio_desc = {
-	.name = "vddio",
-	.of_match = of_match_ptr("vddio-regulator"),
-	.n_voltages = ARRAY_SIZE(vddio_voltage_table),
-	.volt_table = vddio_voltage_table,
-	.ops = &vddio_regulator_ops,
-	.type = REGULATOR_VOLTAGE,
-	.owner = THIS_MODULE,
-};
-
-static const struct regulator_ops vddh_regulator_ops = {
-};
-
-static const struct regulator_desc vddh_desc = {
-	.name = "vddh",
-	.of_match = of_match_ptr("vddh-regulator"),
-	.n_voltages = 1,
-	.fixed_uV = 2500000,
-	.ops = &vddh_regulator_ops,
-	.type = REGULATOR_VOLTAGE,
-	.owner = THIS_MODULE,
-};
-
-static int at8031_register_regulators(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-	struct device *dev = &phydev->mdio.dev;
-	struct regulator_config config = { };
-
-	config.dev = dev;
-	config.driver_data = phydev;
-
-	priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config);
-	if (IS_ERR(priv->vddio_rdev)) {
-		phydev_err(phydev, "failed to register VDDIO regulator\n");
-		return PTR_ERR(priv->vddio_rdev);
-	}
-
-	priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config);
-	if (IS_ERR(priv->vddh_rdev)) {
-		phydev_err(phydev, "failed to register VDDH regulator\n");
-		return PTR_ERR(priv->vddh_rdev);
-	}
-
-	return 0;
-}
-
-static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-{
-	struct phy_device *phydev = upstream;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
-	DECLARE_PHY_INTERFACE_MASK(interfaces);
-	phy_interface_t iface;
-
-	linkmode_zero(phy_support);
-	phylink_set(phy_support, 1000baseX_Full);
-	phylink_set(phy_support, 1000baseT_Full);
-	phylink_set(phy_support, Autoneg);
-	phylink_set(phy_support, Pause);
-	phylink_set(phy_support, Asym_Pause);
-
-	linkmode_zero(sfp_support);
-	sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
-	/* Some modules support 10G modes as well as others we support.
-	 * Mask out non-supported modes so the correct interface is picked.
-	 */
-	linkmode_and(sfp_support, phy_support, sfp_support);
-
-	if (linkmode_empty(sfp_support)) {
-		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-		return -EINVAL;
-	}
-
-	iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
-
-	/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
-	 * interface for use with SFP modules.
-	 * However, some copper modules detected as having a preferred SGMII
-	 * interface do default to and function in 1000Base-X mode, so just
-	 * print a warning and allow such modules, as they may have some chance
-	 * of working.
-	 */
-	if (iface == PHY_INTERFACE_MODE_SGMII)
-		dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
-	else if (iface != PHY_INTERFACE_MODE_1000BASEX)
-		return -EINVAL;
-
-	return 0;
-}
-
-static const struct sfp_upstream_ops at8031_sfp_ops = {
-	.attach = phy_sfp_attach,
-	.detach = phy_sfp_detach,
-	.module_insert = at8031_sfp_insert,
-};
-
-static int at8031_parse_dt(struct phy_device *phydev)
-{
-	struct device_node *node = phydev->mdio.dev.of_node;
-	struct at803x_priv *priv = phydev->priv;
-	int ret;
-
-	if (of_property_read_bool(node, "qca,keep-pll-enabled"))
-		priv->flags |= AT803X_KEEP_PLL_ENABLED;
-
-	ret = at8031_register_regulators(phydev);
-	if (ret < 0)
-		return ret;
-
-	ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
-						 "vddio");
-	if (ret) {
-		phydev_err(phydev, "failed to get VDDIO regulator\n");
-		return ret;
-	}
-
-	/* Only AR8031/8033 support 1000Base-X for SFP modules */
-	return phy_sfp_probe(phydev, &at8031_sfp_ops);
-}
-
-static int at8031_probe(struct phy_device *phydev)
-{
-	struct at803x_priv *priv;
-	int mode_cfg;
-	int ccr;
-	int ret;
-
-	ret = at803x_probe(phydev);
-	if (ret)
-		return ret;
-
-	priv = phydev->priv;
-
-	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
-	 * options.
-	 */
-	ret = at8031_parse_dt(phydev);
-	if (ret)
-		return ret;
-
-	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-	if (ccr < 0)
-		return ccr;
-	mode_cfg = ccr & AT803X_MODE_CFG_MASK;
-
-	switch (mode_cfg) {
-	case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
-	case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
-		priv->is_1000basex = true;
-		fallthrough;
-	case AT803X_MODE_CFG_FX100_RGMII_50OHM:
-	case AT803X_MODE_CFG_FX100_RGMII_75OHM:
-		priv->is_fiber = true;
-		break;
-	}
-
-	/* Disable WoL in 1588 register which is enabled
-	 * by default
-	 */
-	return phy_modify_mmd(phydev, MDIO_MMD_PCS,
-			      AT803X_PHY_MMD3_WOL_CTRL,
-			      AT803X_WOL_EN, 0);
-}
-
-static int at8031_config_init(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-	int ret;
-
-	/* Some bootloaders leave the fiber page selected.
-	 * Switch to the appropriate page (fiber or copper), as otherwise we
-	 * read the PHY capabilities from the wrong page.
-	 */
-	phy_lock_mdio_bus(phydev);
-	ret = at803x_write_page(phydev,
-				priv->is_fiber ? AT803X_PAGE_FIBER :
-						 AT803X_PAGE_COPPER);
-	phy_unlock_mdio_bus(phydev);
-	if (ret)
-		return ret;
-
-	ret = at8031_pll_config(phydev);
-	if (ret < 0)
-		return ret;
-
-	return at803x_config_init(phydev);
-}
-
-static int at8031_set_wol(struct phy_device *phydev,
-			  struct ethtool_wolinfo *wol)
-{
-	int ret;
-
-	/* First setup MAC address and enable WOL interrupt */
-	ret = at803x_set_wol(phydev, wol);
-	if (ret)
-		return ret;
-
-	if (wol->wolopts & WAKE_MAGIC)
-		/* Enable WOL function for 1588 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-				     AT803X_PHY_MMD3_WOL_CTRL,
-				     0, AT803X_WOL_EN);
-	else
-		/* Disable WoL function for 1588 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-				     AT803X_PHY_MMD3_WOL_CTRL,
-				     AT803X_WOL_EN, 0);
-
-	return ret;
-}
-
-static int at8031_config_intr(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-	int err, value = 0;
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED &&
-	    priv->is_fiber) {
-		/* Clear any pending interrupts */
-		err = at803x_ack_interrupt(phydev);
-		if (err)
-			return err;
-
-		value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
-		value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
-
-		err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value);
-		if (err)
-			return err;
-	}
-
-	return at803x_config_intr(phydev);
-}
-
-/* AR8031 and AR8033 share the same read status logic */
-static int at8031_read_status(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-
-	if (priv->is_1000basex)
-		return genphy_c37_read_status(phydev);
-
-	return at803x_read_status(phydev);
-}
-
-/* AR8031 and AR8035 share the same cable test get status reg */
-static int at8031_cable_test_get_status(struct phy_device *phydev,
-					bool *finished)
-{
-	return at803x_cable_test_get_status(phydev, finished, 0xf);
-}
-
-/* AR8031 and AR8035 share the same cable test start logic */
-static int at8031_cable_test_start(struct phy_device *phydev)
-{
-	at803x_cable_test_autoneg(phydev);
-	phy_write(phydev, MII_CTRL1000, 0);
-	/* we do all the (time consuming) work later */
-	return 0;
-}
-
-/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */
-static int at8032_cable_test_get_status(struct phy_device *phydev,
-					bool *finished)
-{
-	return at803x_cable_test_get_status(phydev, finished, 0x3);
-}
-
-static int at8035_parse_dt(struct phy_device *phydev)
-{
-	struct at803x_priv *priv = phydev->priv;
-
-	/* Mask is set by the generic at803x_parse_dt
-	 * if property is set. Assume property is set
-	 * with the mask not zero.
-	 */
-	if (priv->clk_25m_mask) {
-		/* Fixup for the AR8030/AR8035. This chip has another mask and
-		 * doesn't support the DSP reference. Eg. the lowest bit of the
-		 * mask. The upper two bits select the same frequencies. Mask
-		 * the lowest bit here.
-		 *
-		 * Warning:
-		 *   There was no datasheet for the AR8030 available so this is
-		 *   just a guess. But the AR8035 is listed as pin compatible
-		 *   to the AR8030 so there might be a good chance it works on
-		 *   the AR8030 too.
-		 */
-		priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
-		priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
-	}
-
-	return 0;
-}
-
-/* AR8030 and AR8035 shared the same special mask for clk_25m */
-static int at8035_probe(struct phy_device *phydev)
-{
-	int ret;
-
-	ret = at803x_probe(phydev);
-	if (ret)
-		return ret;
-
-	return at8035_parse_dt(phydev);
-}
-
-static int qca83xx_config_init(struct phy_device *phydev)
-{
-	u8 switch_revision;
-
-	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
-
-	switch (switch_revision) {
-	case 1:
-		/* For 100M waveform */
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
-		/* Turn on Gigabit clock */
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
-		break;
-
-	case 2:
-		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
-		fallthrough;
-	case 4:
-		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
-		break;
-	}
-
-	/* Following original QCA sourcecode set port to prefer master */
-	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
-
-	return 0;
-}
-
-static int qca8327_config_init(struct phy_device *phydev)
-{
-	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
-	 * Disable on init and enable only with 100m speed following
-	 * qca original source code.
-	 */
-	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-
-	return qca83xx_config_init(phydev);
-}
-
-static void qca83xx_link_change_notify(struct phy_device *phydev)
-{
-	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
-	if (phydev->state == PHY_RUNNING) {
-		if (phydev->speed == SPEED_100)
-			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-					      QCA8327_DEBUG_MANU_CTRL_EN,
-					      QCA8327_DEBUG_MANU_CTRL_EN);
-	} else {
-		/* Reset DAC Amplitude adjustment */
-		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-	}
-}
-
-static int qca83xx_resume(struct phy_device *phydev)
-{
-	int ret, val;
-
-	/* Skip reset if not suspended */
-	if (!phydev->suspended)
-		return 0;
-
-	/* Reinit the port, reset values set by suspend */
-	qca83xx_config_init(phydev);
-
-	/* Reset the port on port resume */
-	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-
-	/* On resume from suspend the switch execute a reset and
-	 * restart auto-negotiation. Wait for reset to complete.
-	 */
-	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
-				    50000, 600000, true);
-	if (ret)
-		return ret;
-
-	usleep_range(1000, 2000);
-
-	return 0;
-}
-
-static int qca83xx_suspend(struct phy_device *phydev)
-{
-	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
-			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
-
-	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
-			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
-			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
-
-	return 0;
-}
-
-static int qca8337_suspend(struct phy_device *phydev)
-{
-	/* Only QCA8337 support actual suspend. */
-	genphy_suspend(phydev);
-
-	return qca83xx_suspend(phydev);
-}
-
-static int qca8327_suspend(struct phy_device *phydev)
-{
-	u16 mask = 0;
-
-	/* QCA8327 cause port unreliability when phy suspend
-	 * is set.
-	 */
-	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
-	phy_modify(phydev, MII_BMCR, mask, 0);
-
-	return qca83xx_suspend(phydev);
-}
-
-static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
-{
-	int ret;
-
-	/* Enable fast retrain */
-	ret = genphy_c45_fast_retrain(phydev, true);
-	if (ret)
-		return ret;
-
-	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
-		      QCA808X_TOP_OPTION1_DATA);
-	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
-		      QCA808X_MSE_THRESHOLD_20DB_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
-		      QCA808X_MSE_THRESHOLD_17DB_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
-		      QCA808X_MSE_THRESHOLD_27DB_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
-		      QCA808X_MSE_THRESHOLD_28DB_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
-		      QCA808X_MMD3_DEBUG_1_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
-		      QCA808X_MMD3_DEBUG_4_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
-		      QCA808X_MMD3_DEBUG_5_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
-		      QCA808X_MMD3_DEBUG_3_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
-		      QCA808X_MMD3_DEBUG_6_VALUE);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
-		      QCA808X_MMD3_DEBUG_2_VALUE);
-
-	return 0;
-}
-
-static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
-{
-	u16 seed_value;
-
-	if (!enable)
-		return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-				QCA808X_MASTER_SLAVE_SEED_ENABLE, 0);
-
-	seed_value = get_random_u32_below(QCA808X_MASTER_SLAVE_SEED_RANGE);
-	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-			QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE,
-			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) |
-			QCA808X_MASTER_SLAVE_SEED_ENABLE);
-}
-
-static bool qca808x_is_prefer_master(struct phy_device *phydev)
-{
-	return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) ||
-		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
-}
-
-static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
-{
-	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-}
-
-static int qca808x_config_init(struct phy_device *phydev)
-{
-	int ret;
-
-	/* Active adc&vga on 802.3az for the link 1000M and 100M */
-	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
-			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
-	if (ret)
-		return ret;
-
-	/* Adjust the threshold on 802.3az for the link 1000M */
-	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
-			    QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
-			    QCA808X_MMD3_AZ_TRAINING_VAL);
-	if (ret)
-		return ret;
-
-	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-		/* Config the fast retrain for the link 2500M */
-		ret = qca808x_phy_fast_retrain_config(phydev);
-		if (ret)
-			return ret;
-
-		ret = genphy_read_master_slave(phydev);
-		if (ret < 0)
-			return ret;
-
-		if (!qca808x_is_prefer_master(phydev)) {
-			/* Enable seed and configure lower ramdom seed to make phy
-			 * linked as slave mode.
-			 */
-			ret = qca808x_phy_ms_seed_enable(phydev, true);
-			if (ret)
-				return ret;
-		}
-	}
-
-	/* Configure adc threshold as 100mv for the link 10M */
-	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
-				     QCA808X_ADC_THRESHOLD_MASK,
-				     QCA808X_ADC_THRESHOLD_100MV);
-}
-
-static int qca808x_read_status(struct phy_device *phydev)
-{
-	struct at803x_ss_mask ss_mask = { 0 };
-	int ret;
-
-	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
-	if (ret < 0)
-		return ret;
-
-	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
-			 ret & MDIO_AN_10GBT_STAT_LP2_5G);
-
-	ret = genphy_read_status(phydev);
-	if (ret)
-		return ret;
-
-	/* qca8081 takes the different bits for speed value from at803x */
-	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
-	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
-	ret = at803x_read_specific_status(phydev, ss_mask);
-	if (ret < 0)
-		return ret;
-
-	if (phydev->link) {
-		if (phydev->speed == SPEED_2500)
-			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-		else
-			phydev->interface = PHY_INTERFACE_MODE_SGMII;
-	} else {
-		/* generate seed as a lower random value to make PHY linked as SLAVE easily,
-		 * except for master/slave configuration fault detected or the master mode
-		 * preferred.
-		 *
-		 * the reason for not putting this code into the function link_change_notify is
-		 * the corner case where the link partner is also the qca8081 PHY and the seed
-		 * value is configured as the same value, the link can't be up and no link change
-		 * occurs.
-		 */
-		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
-			    qca808x_is_prefer_master(phydev)) {
-				qca808x_phy_ms_seed_enable(phydev, false);
-			} else {
-				qca808x_phy_ms_seed_enable(phydev, true);
-			}
-		}
-	}
-
-	return 0;
-}
-
-static int qca808x_soft_reset(struct phy_device *phydev)
-{
-	int ret;
-
-	ret = genphy_soft_reset(phydev);
-	if (ret < 0)
-		return ret;
-
-	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
-		ret = qca808x_phy_ms_seed_enable(phydev, true);
-
-	return ret;
-}
-
-static bool qca808x_cdt_fault_length_valid(int cdt_code)
-{
-	switch (cdt_code) {
-	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-		return true;
-	default:
-		return false;
-	}
-}
-
-static int qca808x_cable_test_result_trans(int cdt_code)
-{
-	switch (cdt_code) {
-	case QCA808X_CDT_STATUS_STAT_NORMAL:
-		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
-	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
-	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
-	case QCA808X_CDT_STATUS_STAT_FAIL:
-	default:
-		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
-	}
-}
-
-static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
-				    int result)
-{
-	int val;
-	u32 cdt_length_reg = 0;
-
-	switch (pair) {
-	case ETHTOOL_A_CABLE_PAIR_A:
-		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
-		break;
-	case ETHTOOL_A_CABLE_PAIR_B:
-		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
-		break;
-	case ETHTOOL_A_CABLE_PAIR_C:
-		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
-		break;
-	case ETHTOOL_A_CABLE_PAIR_D:
-		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
-	if (val < 0)
-		return val;
-
-	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
-		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
-	else
-		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
-
-	return at803x_cdt_fault_length(val);
-}
-
-static int qca808x_cable_test_start(struct phy_device *phydev)
-{
-	int ret;
-
-	/* perform CDT with the following configs:
-	 * 1. disable hibernation.
-	 * 2. force PHY working in MDI mode.
-	 * 3. for PHY working in 1000BaseT.
-	 * 4. configure the threshold.
-	 */
-
-	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
-	if (ret < 0)
-		return ret;
-
-	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
-	if (ret < 0)
-		return ret;
-
-	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
-	phydev->duplex = DUPLEX_FULL;
-	phydev->speed = SPEED_1000;
-	ret = genphy_c45_pma_setup_forced(phydev);
-	if (ret < 0)
-		return ret;
-
-	ret = genphy_setup_forced(phydev);
-	if (ret < 0)
-		return ret;
-
-	/* configure the thresholds for open, short, pair ok test */
-	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
-	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
-
-	return 0;
-}
-
-static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
-					      u16 status)
-{
-	int length, result;
-	u16 pair_code;
-
-	switch (pair) {
-	case ETHTOOL_A_CABLE_PAIR_A:
-		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
-		break;
-	case ETHTOOL_A_CABLE_PAIR_B:
-		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
-		break;
-	case ETHTOOL_A_CABLE_PAIR_C:
-		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
-		break;
-	case ETHTOOL_A_CABLE_PAIR_D:
-		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	result = qca808x_cable_test_result_trans(pair_code);
-	ethnl_cable_test_result(phydev, pair, result);
-
-	if (qca808x_cdt_fault_length_valid(pair_code)) {
-		length = qca808x_cdt_fault_length(phydev, pair, result);
-		ethnl_cable_test_fault_length(phydev, pair, length);
-	}
-
-	return 0;
-}
-
-static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
-{
-	int ret, val;
-
-	*finished = false;
-
-	val = QCA808X_CDT_ENABLE_TEST |
-	      QCA808X_CDT_LENGTH_UNIT;
-	ret = at803x_cdt_start(phydev, val);
-	if (ret)
-		return ret;
-
-	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
-	if (ret)
-		return ret;
-
-	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
-	if (val < 0)
-		return val;
-
-	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
-	if (ret)
-		return ret;
-
-	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
-	if (ret)
-		return ret;
-
-	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
-	if (ret)
-		return ret;
-
-	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
-	if (ret)
-		return ret;
-
-	*finished = true;
-
-	return 0;
-}
-
-static int qca808x_get_features(struct phy_device *phydev)
-{
-	int ret;
-
-	ret = genphy_c45_pma_read_abilities(phydev);
-	if (ret)
-		return ret;
-
-	/* The autoneg ability is not existed in bit3 of MMD7.1,
-	 * but it is supported by qca808x PHY, so we add it here
-	 * manually.
-	 */
-	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
-
-	/* As for the qca8081 1G version chip, the 2500baseT ability is also
-	 * existed in the bit0 of MMD1.21, we need to remove it manually if
-	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
-	 */
-	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
-	if (ret < 0)
-		return ret;
-
-	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-
-	return 0;
-}
-
-static int qca808x_config_aneg(struct phy_device *phydev)
-{
-	int phy_ctrl = 0;
-	int ret;
-
-	ret = at803x_prepare_config_aneg(phydev);
-	if (ret)
-		return ret;
-
-	/* The reg MII_BMCR also needs to be configured for force mode, the
-	 * genphy_config_aneg is also needed.
-	 */
-	if (phydev->autoneg == AUTONEG_DISABLE)
-		genphy_c45_pma_setup_forced(phydev);
-
-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
-		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
-
-	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
-	if (ret < 0)
-		return ret;
-
-	return __genphy_config_aneg(phydev, ret);
-}
-
-static void qca808x_link_change_notify(struct phy_device *phydev)
-{
-	/* Assert interface sgmii fifo on link down, deassert it on link up,
-	 * the interface device address is always phy address added by 1.
-	 */
-	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
-				   MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
-				   QCA8081_PHY_FIFO_RSTN,
-				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
-}
-
-static struct phy_driver at803x_driver[] = {
-{
-	/* Qualcomm Atheros AR8035 */
-	PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
-	.name			= "Qualcomm Atheros AR8035",
-	.flags			= PHY_POLL_CABLE_TEST,
-	.probe			= at8035_probe,
-	.config_aneg		= at803x_config_aneg,
-	.config_init		= at803x_config_init,
-	.soft_reset		= genphy_soft_reset,
-	.set_wol		= at803x_set_wol,
-	.get_wol		= at803x_get_wol,
-	.suspend		= at803x_suspend,
-	.resume			= at803x_resume,
-	/* PHY_GBIT_FEATURES */
-	.read_status		= at803x_read_status,
-	.config_intr		= at803x_config_intr,
-	.handle_interrupt	= at803x_handle_interrupt,
-	.get_tunable		= at803x_get_tunable,
-	.set_tunable		= at803x_set_tunable,
-	.cable_test_start	= at8031_cable_test_start,
-	.cable_test_get_status	= at8031_cable_test_get_status,
-}, {
-	/* Qualcomm Atheros AR8030 */
-	.phy_id			= ATH8030_PHY_ID,
-	.name			= "Qualcomm Atheros AR8030",
-	.phy_id_mask		= AT8030_PHY_ID_MASK,
-	.probe			= at8035_probe,
-	.config_init		= at803x_config_init,
-	.link_change_notify	= at803x_link_change_notify,
-	.set_wol		= at803x_set_wol,
-	.get_wol		= at803x_get_wol,
-	.suspend		= at803x_suspend,
-	.resume			= at803x_resume,
-	/* PHY_BASIC_FEATURES */
-	.config_intr		= at803x_config_intr,
-	.handle_interrupt	= at803x_handle_interrupt,
-}, {
-	/* Qualcomm Atheros AR8031/AR8033 */
-	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
-	.name			= "Qualcomm Atheros AR8031/AR8033",
-	.flags			= PHY_POLL_CABLE_TEST,
-	.probe			= at8031_probe,
-	.config_init		= at8031_config_init,
-	.config_aneg		= at803x_config_aneg,
-	.soft_reset		= genphy_soft_reset,
-	.set_wol		= at8031_set_wol,
-	.get_wol		= at803x_get_wol,
-	.suspend		= at803x_suspend,
-	.resume			= at803x_resume,
-	.read_page		= at803x_read_page,
-	.write_page		= at803x_write_page,
-	.get_features		= at803x_get_features,
-	.read_status		= at8031_read_status,
-	.config_intr		= at8031_config_intr,
-	.handle_interrupt	= at803x_handle_interrupt,
-	.get_tunable		= at803x_get_tunable,
-	.set_tunable		= at803x_set_tunable,
-	.cable_test_start	= at8031_cable_test_start,
-	.cable_test_get_status	= at8031_cable_test_get_status,
-}, {
-	/* Qualcomm Atheros AR8032 */
-	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
-	.name			= "Qualcomm Atheros AR8032",
-	.probe			= at803x_probe,
-	.flags			= PHY_POLL_CABLE_TEST,
-	.config_init		= at803x_config_init,
-	.link_change_notify	= at803x_link_change_notify,
-	.suspend		= at803x_suspend,
-	.resume			= at803x_resume,
-	/* PHY_BASIC_FEATURES */
-	.config_intr		= at803x_config_intr,
-	.handle_interrupt	= at803x_handle_interrupt,
-	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at8032_cable_test_get_status,
-}, {
-	/* ATHEROS AR9331 */
-	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
-	.name			= "Qualcomm Atheros AR9331 built-in PHY",
-	.probe			= at803x_probe,
-	.suspend		= at803x_suspend,
-	.resume			= at803x_resume,
-	.flags			= PHY_POLL_CABLE_TEST,
-	/* PHY_BASIC_FEATURES */
-	.config_intr		= at803x_config_intr,
-	.handle_interrupt	= at803x_handle_interrupt,
-	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at8032_cable_test_get_status,
-	.read_status		= at803x_read_status,
-	.soft_reset		= genphy_soft_reset,
-	.config_aneg		= at803x_config_aneg,
-}, {
-	/* Qualcomm Atheros QCA9561 */
-	PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
-	.name			= "Qualcomm Atheros QCA9561 built-in PHY",
-	.probe			= at803x_probe,
-	.suspend		= at803x_suspend,
-	.resume			= at803x_resume,
-	.flags			= PHY_POLL_CABLE_TEST,
-	/* PHY_BASIC_FEATURES */
-	.config_intr		= at803x_config_intr,
-	.handle_interrupt	= at803x_handle_interrupt,
-	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at8032_cable_test_get_status,
-	.read_status		= at803x_read_status,
-	.soft_reset		= genphy_soft_reset,
-	.config_aneg		= at803x_config_aneg,
-}, {
-	/* QCA8337 */
-	.phy_id			= QCA8337_PHY_ID,
-	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-	.name			= "Qualcomm Atheros 8337 internal PHY",
-	/* PHY_GBIT_FEATURES */
-	.probe			= at803x_probe,
-	.flags			= PHY_IS_INTERNAL,
-	.config_init		= qca83xx_config_init,
-	.soft_reset		= genphy_soft_reset,
-	.get_sset_count		= qca83xx_get_sset_count,
-	.get_strings		= qca83xx_get_strings,
-	.get_stats		= qca83xx_get_stats,
-	.suspend		= qca8337_suspend,
-	.resume			= qca83xx_resume,
-}, {
-	/* QCA8327-A from switch QCA8327-AL1A */
-	.phy_id			= QCA8327_A_PHY_ID,
-	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-	.name			= "Qualcomm Atheros 8327-A internal PHY",
-	/* PHY_GBIT_FEATURES */
-	.link_change_notify	= qca83xx_link_change_notify,
-	.probe			= at803x_probe,
-	.flags			= PHY_IS_INTERNAL,
-	.config_init		= qca8327_config_init,
-	.soft_reset		= genphy_soft_reset,
-	.get_sset_count		= qca83xx_get_sset_count,
-	.get_strings		= qca83xx_get_strings,
-	.get_stats		= qca83xx_get_stats,
-	.suspend		= qca8327_suspend,
-	.resume			= qca83xx_resume,
-}, {
-	/* QCA8327-B from switch QCA8327-BL1A */
-	.phy_id			= QCA8327_B_PHY_ID,
-	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-	.name			= "Qualcomm Atheros 8327-B internal PHY",
-	/* PHY_GBIT_FEATURES */
-	.link_change_notify	= qca83xx_link_change_notify,
-	.probe			= at803x_probe,
-	.flags			= PHY_IS_INTERNAL,
-	.config_init		= qca8327_config_init,
-	.soft_reset		= genphy_soft_reset,
-	.get_sset_count		= qca83xx_get_sset_count,
-	.get_strings		= qca83xx_get_strings,
-	.get_stats		= qca83xx_get_stats,
-	.suspend		= qca8327_suspend,
-	.resume			= qca83xx_resume,
-}, {
-	/* Qualcomm QCA8081 */
-	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
-	.name			= "Qualcomm QCA8081",
-	.flags			= PHY_POLL_CABLE_TEST,
-	.probe			= at803x_probe,
-	.config_intr		= at803x_config_intr,
-	.handle_interrupt	= at803x_handle_interrupt,
-	.get_tunable		= at803x_get_tunable,
-	.set_tunable		= at803x_set_tunable,
-	.set_wol		= at803x_set_wol,
-	.get_wol		= at803x_get_wol,
-	.get_features		= qca808x_get_features,
-	.config_aneg		= qca808x_config_aneg,
-	.suspend		= genphy_suspend,
-	.resume			= genphy_resume,
-	.read_status		= qca808x_read_status,
-	.config_init		= qca808x_config_init,
-	.soft_reset		= qca808x_soft_reset,
-	.cable_test_start	= qca808x_cable_test_start,
-	.cable_test_get_status	= qca808x_cable_test_get_status,
-	.link_change_notify	= qca808x_link_change_notify,
-}, };
-
-module_phy_driver(at803x_driver);
-
-static struct mdio_device_id __maybe_unused atheros_tbl[] = {
-	{ ATH8030_PHY_ID, AT8030_PHY_ID_MASK },
-	{ PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(mdio, atheros_tbl);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 312a8bb35d..370e4ed450 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -665,10 +665,11 @@ static int bcm54616s_config_aneg(struct phy_device *phydev)
 static int bcm54616s_read_status(struct phy_device *phydev)
 {
 	struct bcm54616s_phy_priv *priv = phydev->priv;
+	bool changed;
 	int err;
 
 	if (priv->mode_1000bx_en)
-		err = genphy_c37_read_status(phydev);
+		err = genphy_c37_read_status(phydev, &changed);
 	else
 		err = genphy_read_status(phydev);
 
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 29e1cbea6d..c3426a17e6 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/netdevice.h>
+#include <linux/bitfield.h>
 
 #define DP83822_PHY_ID	        0x2000a240
 #define DP83825S_PHY_ID		0x2000a140
@@ -34,6 +35,10 @@
 #define MII_DP83822_GENCFG	0x465
 #define MII_DP83822_SOR1	0x467
 
+/* DP83826 specific registers */
+#define MII_DP83826_VOD_CFG1	0x30b
+#define MII_DP83826_VOD_CFG2	0x30c
+
 /* GENCFG */
 #define DP83822_SIG_DET_LOW	BIT(0)
 
@@ -95,6 +100,8 @@
 #define DP83822_WOL_CLR_INDICATION BIT(11)
 
 /* RCSR bits */
+#define DP83822_RMII_MODE_EN	BIT(5)
+#define DP83822_RMII_MODE_SEL	BIT(7)
 #define DP83822_RGMII_MODE_EN	BIT(9)
 #define DP83822_RX_CLK_SHIFT	BIT(12)
 #define DP83822_TX_CLK_SHIFT	BIT(11)
@@ -110,6 +117,19 @@
 #define DP83822_RX_ER_STR_MASK	GENMASK(9, 8)
 #define DP83822_RX_ER_SHIFT	8
 
+/* DP83826: VOD_CFG1 & VOD_CFG2 */
+#define DP83826_VOD_CFG1_MINUS_MDIX_MASK	GENMASK(13, 12)
+#define DP83826_VOD_CFG1_MINUS_MDI_MASK		GENMASK(11, 6)
+#define DP83826_VOD_CFG2_MINUS_MDIX_MASK	GENMASK(15, 12)
+#define DP83826_VOD_CFG2_PLUS_MDIX_MASK		GENMASK(11, 6)
+#define DP83826_VOD_CFG2_PLUS_MDI_MASK		GENMASK(5, 0)
+#define DP83826_CFG_DAC_MINUS_MDIX_5_TO_4	GENMASK(5, 4)
+#define DP83826_CFG_DAC_MINUS_MDIX_3_TO_0	GENMASK(3, 0)
+#define DP83826_CFG_DAC_PERCENT_PER_STEP	625
+#define DP83826_CFG_DAC_PERCENT_DEFAULT		10000
+#define DP83826_CFG_DAC_MINUS_DEFAULT		0x30
+#define DP83826_CFG_DAC_PLUS_DEFAULT		0x10
+
 #define MII_DP83822_FIBER_ADVERTISE    (ADVERTISED_TP | ADVERTISED_MII | \
 					ADVERTISED_FIBRE | \
 					ADVERTISED_Pause | ADVERTISED_Asym_Pause)
@@ -118,6 +138,8 @@ struct dp83822_private {
 	bool fx_signal_det_low;
 	int fx_enabled;
 	u16 fx_sd_enable;
+	u8 cfg_dac_minus;
+	u8 cfg_dac_plus;
 };
 
 static int dp83822_set_wol(struct phy_device *phydev,
@@ -233,7 +255,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
 				DP83822_ENERGY_DET_INT_EN |
 				DP83822_LINK_QUAL_INT_EN);
 
-		/* Private data pointer is NULL on DP83825/26 */
+		/* Private data pointer is NULL on DP83825 */
 		if (!dp83822 || !dp83822->fx_enabled)
 			misr_status |= DP83822_ANEG_COMPLETE_INT_EN |
 				       DP83822_DUP_MODE_CHANGE_INT_EN |
@@ -254,7 +276,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
 				DP83822_PAGE_RX_INT_EN |
 				DP83822_EEE_ERROR_CHANGE_INT_EN);
 
-		/* Private data pointer is NULL on DP83825/26 */
+		/* Private data pointer is NULL on DP83825 */
 		if (!dp83822 || !dp83822->fx_enabled)
 			misr_status |= DP83822_ANEG_ERR_INT_EN |
 				       DP83822_WOL_PKT_INT_EN;
@@ -477,6 +499,85 @@ static int dp83822_config_init(struct phy_device *phydev)
 	return dp8382x_disable_wol(phydev);
 }
 
+static int dp83826_config_rmii_mode(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	const char *of_val;
+	int ret;
+
+	if (!device_property_read_string(dev, "ti,rmii-mode", &of_val)) {
+		if (strcmp(of_val, "master") == 0) {
+			ret = phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+						 DP83822_RMII_MODE_SEL);
+		} else if (strcmp(of_val, "slave") == 0) {
+			ret = phy_set_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+					       DP83822_RMII_MODE_SEL);
+		} else {
+			phydev_err(phydev, "Invalid value for ti,rmii-mode property (%s)\n",
+				   of_val);
+			ret = -EINVAL;
+		}
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int dp83826_config_init(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	u16 val, mask;
+	int ret;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+		ret = phy_set_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+				       DP83822_RMII_MODE_EN);
+		if (ret)
+			return ret;
+
+		ret = dp83826_config_rmii_mode(phydev);
+		if (ret)
+			return ret;
+	} else {
+		ret = phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+					 DP83822_RMII_MODE_EN);
+		if (ret)
+			return ret;
+	}
+
+	if (dp83822->cfg_dac_minus != DP83826_CFG_DAC_MINUS_DEFAULT) {
+		val = FIELD_PREP(DP83826_VOD_CFG1_MINUS_MDI_MASK, dp83822->cfg_dac_minus) |
+		      FIELD_PREP(DP83826_VOD_CFG1_MINUS_MDIX_MASK,
+				 FIELD_GET(DP83826_CFG_DAC_MINUS_MDIX_5_TO_4,
+					   dp83822->cfg_dac_minus));
+		mask = DP83826_VOD_CFG1_MINUS_MDIX_MASK | DP83826_VOD_CFG1_MINUS_MDI_MASK;
+		ret = phy_modify_mmd(phydev, DP83822_DEVADDR, MII_DP83826_VOD_CFG1, mask, val);
+		if (ret)
+			return ret;
+
+		val = FIELD_PREP(DP83826_VOD_CFG2_MINUS_MDIX_MASK,
+				 FIELD_GET(DP83826_CFG_DAC_MINUS_MDIX_3_TO_0,
+					   dp83822->cfg_dac_minus));
+		mask = DP83826_VOD_CFG2_MINUS_MDIX_MASK;
+		ret = phy_modify_mmd(phydev, DP83822_DEVADDR, MII_DP83826_VOD_CFG2, mask, val);
+		if (ret)
+			return ret;
+	}
+
+	if (dp83822->cfg_dac_plus != DP83826_CFG_DAC_PLUS_DEFAULT) {
+		val = FIELD_PREP(DP83826_VOD_CFG2_PLUS_MDIX_MASK, dp83822->cfg_dac_plus) |
+		      FIELD_PREP(DP83826_VOD_CFG2_PLUS_MDI_MASK, dp83822->cfg_dac_plus);
+		mask = DP83826_VOD_CFG2_PLUS_MDIX_MASK | DP83826_VOD_CFG2_PLUS_MDI_MASK;
+		ret = phy_modify_mmd(phydev, DP83822_DEVADDR, MII_DP83826_VOD_CFG2, mask, val);
+		if (ret)
+			return ret;
+	}
+
+	return dp8382x_disable_wol(phydev);
+}
+
 static int dp8382x_config_init(struct phy_device *phydev)
 {
 	return dp8382x_disable_wol(phydev);
@@ -512,11 +613,44 @@ static int dp83822_of_init(struct phy_device *phydev)
 
 	return 0;
 }
+
+static int dp83826_to_dac_minus_one_regval(int percent)
+{
+	int tmp = DP83826_CFG_DAC_PERCENT_DEFAULT - percent;
+
+	return tmp / DP83826_CFG_DAC_PERCENT_PER_STEP;
+}
+
+static int dp83826_to_dac_plus_one_regval(int percent)
+{
+	int tmp = percent - DP83826_CFG_DAC_PERCENT_DEFAULT;
+
+	return tmp / DP83826_CFG_DAC_PERCENT_PER_STEP;
+}
+
+static void dp83826_of_init(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	struct device *dev = &phydev->mdio.dev;
+	u32 val;
+
+	dp83822->cfg_dac_minus = DP83826_CFG_DAC_MINUS_DEFAULT;
+	if (!device_property_read_u32(dev, "ti,cfg-dac-minus-one-bp", &val))
+		dp83822->cfg_dac_minus += dp83826_to_dac_minus_one_regval(val);
+
+	dp83822->cfg_dac_plus = DP83826_CFG_DAC_PLUS_DEFAULT;
+	if (!device_property_read_u32(dev, "ti,cfg-dac-plus-one-bp", &val))
+		dp83822->cfg_dac_plus += dp83826_to_dac_plus_one_regval(val);
+}
 #else
 static int dp83822_of_init(struct phy_device *phydev)
 {
 	return 0;
 }
+
+static void dp83826_of_init(struct phy_device *phydev)
+{
+}
 #endif /* CONFIG_OF_MDIO */
 
 static int dp83822_read_straps(struct phy_device *phydev)
@@ -570,6 +704,22 @@ static int dp83822_probe(struct phy_device *phydev)
 	return 0;
 }
 
+static int dp83826_probe(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822;
+
+	dp83822 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83822),
+			       GFP_KERNEL);
+	if (!dp83822)
+		return -ENOMEM;
+
+	phydev->priv = dp83822;
+
+	dp83826_of_init(phydev);
+
+	return 0;
+}
+
 static int dp83822_suspend(struct phy_device *phydev)
 {
 	int value;
@@ -613,6 +763,22 @@ static int dp83822_resume(struct phy_device *phydev)
 		.resume = dp83822_resume,			\
 	}
 
+#define DP83826_PHY_DRIVER(_id, _name)				\
+	{							\
+		PHY_ID_MATCH_MODEL(_id),			\
+		.name		= (_name),			\
+		/* PHY_BASIC_FEATURES */			\
+		.probe          = dp83826_probe,		\
+		.soft_reset	= dp83822_phy_reset,		\
+		.config_init	= dp83826_config_init,		\
+		.get_wol = dp83822_get_wol,			\
+		.set_wol = dp83822_set_wol,			\
+		.config_intr = dp83822_config_intr,		\
+		.handle_interrupt = dp83822_handle_interrupt,	\
+		.suspend = dp83822_suspend,			\
+		.resume = dp83822_resume,			\
+	}
+
 #define DP8382X_PHY_DRIVER(_id, _name)				\
 	{							\
 		PHY_ID_MATCH_MODEL(_id),			\
@@ -631,8 +797,8 @@ static int dp83822_resume(struct phy_device *phydev)
 static struct phy_driver dp83822_driver[] = {
 	DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
 	DP8382X_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
-	DP8382X_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
-	DP8382X_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
+	DP83826_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
+	DP83826_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
 	DP8382X_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
 	DP8382X_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
 	DP8382X_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 5f08f9d38b..4120385c5a 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -158,6 +158,7 @@
 /* LED_DRV bits */
 #define DP83867_LED_DRV_EN(x)	BIT((x) * 4)
 #define DP83867_LED_DRV_VAL(x)	BIT((x) * 4 + 1)
+#define DP83867_LED_POLARITY(x)	BIT((x) * 4 + 2)
 
 #define DP83867_LED_FN(idx, val)	(((val) & 0xf) << ((idx) * 4))
 #define DP83867_LED_FN_MASK(idx)	(0xf << ((idx) * 4))
@@ -1152,6 +1153,26 @@ static int dp83867_led_hw_control_get(struct phy_device *phydev, u8 index,
 	return 0;
 }
 
+static int dp83867_led_polarity_set(struct phy_device *phydev, int index,
+				    unsigned long modes)
+{
+	/* Default active high */
+	u16 polarity = DP83867_LED_POLARITY(index);
+	u32 mode;
+
+	for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
+		switch (mode) {
+		case PHY_LED_ACTIVE_LOW:
+			polarity = 0;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+	return phy_modify(phydev, DP83867_LEDCR2,
+			  DP83867_LED_POLARITY(index), polarity);
+}
+
 static struct phy_driver dp83867_driver[] = {
 	{
 		.phy_id		= DP83867_PHY_ID,
@@ -1184,6 +1205,7 @@ static struct phy_driver dp83867_driver[] = {
 		.led_hw_is_supported = dp83867_led_hw_is_supported,
 		.led_hw_control_set = dp83867_led_hw_control_set,
 		.led_hw_control_get = dp83867_led_hw_control_get,
+		.led_polarity_set = dp83867_led_polarity_set,
 	},
 };
 module_phy_driver(dp83867_driver);
diff --git a/drivers/net/phy/dp83tg720.c b/drivers/net/phy/dp83tg720.c
index 326c9770a6..c706429b22 100644
--- a/drivers/net/phy/dp83tg720.c
+++ b/drivers/net/phy/dp83tg720.c
@@ -17,6 +17,11 @@
 #define DP83TG720S_PHY_RESET			0x1f
 #define DP83TG720S_HW_RESET			BIT(15)
 
+#define DP83TG720S_LPS_CFG3			0x18c
+/* Power modes are documented as bit fields but used as values */
+/* Power Mode 0 is Normal mode */
+#define DP83TG720S_LPS_CFG3_PWR_MODE_0		BIT(0)
+
 #define DP83TG720S_RGMII_DELAY_CTRL		0x602
 /* In RGMII mode, Enable or disable the internal delay for RXD */
 #define DP83TG720S_RGMII_RX_CLK_SEL		BIT(1)
@@ -31,11 +36,20 @@
 
 static int dp83tg720_config_aneg(struct phy_device *phydev)
 {
+	int ret;
+
 	/* Autoneg is not supported and this PHY supports only one speed.
 	 * We need to care only about master/slave configuration if it was
 	 * changed by user.
 	 */
-	return genphy_c45_pma_baset1_setup_master_slave(phydev);
+	ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
+	if (ret)
+		return ret;
+
+	/* Re-read role configuration to make changes visible even if
+	 * the link is in administrative down state.
+	 */
+	return genphy_c45_pma_baset1_read_master_slave(phydev);
 }
 
 static int dp83tg720_read_status(struct phy_device *phydev)
@@ -64,6 +78,8 @@ static int dp83tg720_read_status(struct phy_device *phydev)
 			return ret;
 
 		/* After HW reset we need to restore master/slave configuration.
+		 * genphy_c45_pma_baset1_read_master_slave() call will be done
+		 * by the dp83tg720_config_aneg() function.
 		 */
 		ret = dp83tg720_config_aneg(phydev);
 		if (ret)
@@ -154,10 +170,24 @@ static int dp83tg720_config_init(struct phy_device *phydev)
 	 */
 	usleep_range(1000, 2000);
 
-	if (phy_interface_is_rgmii(phydev))
-		return dp83tg720_config_rgmii_delay(phydev);
+	if (phy_interface_is_rgmii(phydev)) {
+		ret = dp83tg720_config_rgmii_delay(phydev);
+		if (ret)
+			return ret;
+	}
+
+	/* In case the PHY is bootstrapped in managed mode, we need to
+	 * wake it.
+	 */
+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LPS_CFG3,
+			    DP83TG720S_LPS_CFG3_PWR_MODE_0);
+	if (ret)
+		return ret;
 
-	return 0;
+	/* Make role configuration visible for ethtool on init and after
+	 * rest.
+	 */
+	return genphy_c45_pma_baset1_read_master_slave(phydev);
 }
 
 static struct phy_driver dp83tg720_driver[] = {
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 1c3ff77de5..c812f16eaa 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -1,10 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell 88Q2XXX automotive 100BASE-T1/1000BASE-T1 PHY driver
+ *
+ * Derived from Marvell Q222x API
+ *
+ * Copyright (C) 2024 Liebherr-Electronics and Drives GmbH
  */
 #include <linux/ethtool_netlink.h>
 #include <linux/marvell_phy.h>
 #include <linux/phy.h>
+#include <linux/hwmon.h>
+
+#define PHY_ID_88Q2220_REVB0	(MARVELL_PHY_ID_88Q2220 | 0x1)
+#define PHY_ID_88Q2220_REVB1	(MARVELL_PHY_ID_88Q2220 | 0x2)
+#define PHY_ID_88Q2220_REVB2	(MARVELL_PHY_ID_88Q2220 | 0x3)
 
 #define MDIO_MMD_AN_MV_STAT			32769
 #define MDIO_MMD_AN_MV_STAT_ANEG		0x0100
@@ -13,8 +22,38 @@
 #define MDIO_MMD_AN_MV_STAT_LOCAL_MASTER	0x4000
 #define MDIO_MMD_AN_MV_STAT_MS_CONF_FAULT	0x8000
 
+#define MDIO_MMD_AN_MV_STAT2			32794
+#define MDIO_MMD_AN_MV_STAT2_AN_RESOLVED	0x0800
+#define MDIO_MMD_AN_MV_STAT2_100BT1		0x2000
+#define MDIO_MMD_AN_MV_STAT2_1000BT1		0x4000
+
+#define MDIO_MMD_PCS_MV_INT_EN			32784
+#define MDIO_MMD_PCS_MV_INT_EN_LINK_UP		0x0040
+#define MDIO_MMD_PCS_MV_INT_EN_LINK_DOWN	0x0080
+#define MDIO_MMD_PCS_MV_INT_EN_100BT1		0x1000
+
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT			32785
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_UP		0x0040
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_DOWN		0x0080
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT_100BT1_GEN	0x1000
+
+#define MDIO_MMD_PCS_MV_GPIO_INT_CTRL			32787
+#define MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS		0x0800
+
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1			32833
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1_RAW_INT		0x0001
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1_INT		0x0040
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1_INT_EN		0x0080
+
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR2			32834
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK		0xc000
+
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR3			32835
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK	0xff00
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR3_MASK		0x00ff
+
 #define MDIO_MMD_PCS_MV_100BT1_STAT1			33032
-#define MDIO_MMD_PCS_MV_100BT1_STAT1_IDLE_ERROR	0x00FF
+#define MDIO_MMD_PCS_MV_100BT1_STAT1_IDLE_ERROR		0x00ff
 #define MDIO_MMD_PCS_MV_100BT1_STAT1_JABBER		0x0100
 #define MDIO_MMD_PCS_MV_100BT1_STAT1_LINK		0x0200
 #define MDIO_MMD_PCS_MV_100BT1_STAT1_LOCAL_RX		0x1000
@@ -27,6 +66,114 @@
 #define MDIO_MMD_PCS_MV_100BT1_STAT2_LINK	0x0004
 #define MDIO_MMD_PCS_MV_100BT1_STAT2_ANGE	0x0008
 
+#define MDIO_MMD_PCS_MV_100BT1_INT_EN			33042
+#define MDIO_MMD_PCS_MV_100BT1_INT_EN_LINKEVENT		0x0400
+
+#define MDIO_MMD_PCS_MV_COPPER_INT_STAT			33043
+#define MDIO_MMD_PCS_MV_COPPER_INT_STAT_LINKEVENT	0x0400
+
+#define MDIO_MMD_PCS_MV_RX_STAT			33328
+
+#define MDIO_MMD_PCS_MV_TDR_RESET			65226
+#define MDIO_MMD_PCS_MV_TDR_RESET_TDR_RST		0x1000
+
+#define MDIO_MMD_PCS_MV_TDR_OFF_SHORT_CABLE		65241
+
+#define MDIO_MMD_PCS_MV_TDR_OFF_LONG_CABLE		65242
+
+#define MDIO_MMD_PCS_MV_TDR_STATUS			65245
+#define MDIO_MMD_PCS_MV_TDR_STATUS_MASK			0x0003
+#define MDIO_MMD_PCS_MV_TDR_STATUS_OFF			0x0001
+#define MDIO_MMD_PCS_MV_TDR_STATUS_ON			0x0002
+#define MDIO_MMD_PCS_MV_TDR_STATUS_DIST_MASK		0xff00
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_MASK	0x00f0
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_SHORT	0x0030
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OPEN	0x00e0
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OK		0x0070
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_IN_PROGR	0x0080
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_NOISE	0x0050
+
+#define MDIO_MMD_PCS_MV_TDR_OFF_CUTOFF			65246
+
+struct mmd_val {
+	int devad;
+	u32 regnum;
+	u16 val;
+};
+
+static const struct mmd_val mv88q222x_revb0_init_seq0[] = {
+	{ MDIO_MMD_PCS, 0x8033, 0x6801 },
+	{ MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1,
+	  MDIO_CTRL1_LPOWER | MDIO_PMA_CTRL1_SPEED1000 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x48 },
+	{ MDIO_MMD_PCS, 0xffe4, 0x6b6 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0 },
+	{ MDIO_MMD_PCS, MDIO_CTRL1, 0x0 },
+};
+
+static const struct mmd_val mv88q222x_revb0_init_seq1[] = {
+	{ MDIO_MMD_PCS, 0xfe79, 0x0 },
+	{ MDIO_MMD_PCS, 0xfe07, 0x125a },
+	{ MDIO_MMD_PCS, 0xfe09, 0x1288 },
+	{ MDIO_MMD_PCS, 0xfe08, 0x2588 },
+	{ MDIO_MMD_PCS, 0xfe11, 0x1105 },
+	{ MDIO_MMD_PCS, 0xfe72, 0x042c },
+	{ MDIO_MMD_PCS, 0xfbba, 0xcb2 },
+	{ MDIO_MMD_PCS, 0xfbbb, 0xc4a },
+	{ MDIO_MMD_AN, 0x8032, 0x2020 },
+	{ MDIO_MMD_AN, 0x8031, 0xa28 },
+	{ MDIO_MMD_AN, 0x8031, 0xc28 },
+	{ MDIO_MMD_PCS, 0xffdb, 0xfc10 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x58 },
+	{ MDIO_MMD_PCS, 0xfe79, 0x4 },
+	{ MDIO_MMD_PCS, 0xfe5f, 0xe8 },
+	{ MDIO_MMD_PCS, 0xfe05, 0x755c },
+};
+
+static const struct mmd_val mv88q222x_revb1_init_seq0[] = {
+	{ MDIO_MMD_PCS, 0xffe4, 0x0007 },
+	{ MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+	{ MDIO_MMD_PCS, 0xffe3, 0x7000 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 },
+};
+
+static const struct mmd_val mv88q222x_revb2_init_seq0[] = {
+	{ MDIO_MMD_PCS, 0xffe4, 0x0007 },
+	{ MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 },
+};
+
+static const struct mmd_val mv88q222x_revb1_revb2_init_seq1[] = {
+	{ MDIO_MMD_PCS, 0xfe07, 0x125a },
+	{ MDIO_MMD_PCS, 0xfe09, 0x1288 },
+	{ MDIO_MMD_PCS, 0xfe08, 0x2588 },
+	{ MDIO_MMD_PCS, 0xfe72, 0x042c },
+	{ MDIO_MMD_PCS, 0xffe4, 0x0071 },
+	{ MDIO_MMD_PCS, 0xffe4, 0x0001 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x0048 },
+	{ MDIO_MMD_PMAPMD, 0x0000, 0x0000 },
+	{ MDIO_MMD_PCS, 0x0000, 0x0000 },
+	{ MDIO_MMD_PCS, 0xffdb, 0xfc10 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x58 },
+	{ MDIO_MMD_PCS, 0xfcad, 0x030c },
+	{ MDIO_MMD_PCS, 0x8032, 0x6001 },
+	{ MDIO_MMD_PCS, 0xfdff, 0x05a5 },
+	{ MDIO_MMD_PCS, 0xfdec, 0xdbaf },
+	{ MDIO_MMD_PCS, 0xfcab, 0x1054 },
+	{ MDIO_MMD_PCS, 0xfcac, 0x1483 },
+	{ MDIO_MMD_PCS, 0x8033, 0xc801 },
+	{ MDIO_MMD_AN, 0x8032, 0x2020 },
+	{ MDIO_MMD_AN, 0x8031, 0xa28 },
+	{ MDIO_MMD_AN, 0x8031, 0xc28 },
+	{ MDIO_MMD_PCS, 0xfbba, 0x0cb2 },
+	{ MDIO_MMD_PCS, 0xfbbb, 0x0c4a },
+	{ MDIO_MMD_PCS, 0xfe5f, 0xe8 },
+	{ MDIO_MMD_PCS, 0xfe05, 0x755c },
+	{ MDIO_MMD_PCS, 0xfa20, 0x002a },
+	{ MDIO_MMD_PCS, 0xfe11, 0x1105 },
+};
+
 static int mv88q2xxx_soft_reset(struct phy_device *phydev)
 {
 	int ret;
@@ -50,20 +197,23 @@ static int mv88q2xxx_read_link_gbit(struct phy_device *phydev)
 
 	/* Read vendor specific Auto-Negotiation status register to get local
 	 * and remote receiver status according to software initialization
-	 * guide.
+	 * guide. However, when not in polling mode the local and remote
+	 * receiver status are not evaluated due to the Marvell 88Q2xxx APIs.
 	 */
 	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT);
 	if (ret < 0) {
 		return ret;
-	} else if ((ret & MDIO_MMD_AN_MV_STAT_LOCAL_RX) &&
-		   (ret & MDIO_MMD_AN_MV_STAT_REMOTE_RX)) {
+	} else if (((ret & MDIO_MMD_AN_MV_STAT_LOCAL_RX) &&
+		   (ret & MDIO_MMD_AN_MV_STAT_REMOTE_RX)) ||
+		   !phy_polling_mode(phydev)) {
 		/* The link state is latched low so that momentary link
 		 * drops can be detected. Do not double-read the status
 		 * in polling mode to detect such short link drops except
 		 * the link was already down.
 		 */
 		if (!phy_polling_mode(phydev) || !phydev->link) {
-			ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_STAT);
+			ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+					   MDIO_PCS_1000BT1_STAT);
 			if (ret < 0)
 				return ret;
 			else if (ret & MDIO_PCS_1000BT1_STAT_LINK)
@@ -71,7 +221,8 @@ static int mv88q2xxx_read_link_gbit(struct phy_device *phydev)
 		}
 
 		if (!link) {
-			ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_STAT);
+			ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+					   MDIO_PCS_1000BT1_STAT);
 			if (ret < 0)
 				return ret;
 			else if (ret & MDIO_PCS_1000BT1_STAT_LINK)
@@ -94,8 +245,20 @@ static int mv88q2xxx_read_link_100m(struct phy_device *phydev)
 	 * the link was already down. In case we are not polling,
 	 * we always read the realtime status.
 	 */
-	if (!phy_polling_mode(phydev) || !phydev->link) {
-		ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_100BT1_STAT1);
+	if (!phy_polling_mode(phydev)) {
+		phydev->link = false;
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_100BT1_STAT2);
+		if (ret < 0)
+			return ret;
+
+		if (ret & MDIO_MMD_PCS_MV_100BT1_STAT2_LINK)
+			phydev->link = true;
+
+		return 0;
+	} else if (!phydev->link) {
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_100BT1_STAT1);
 		if (ret < 0)
 			return ret;
 		else if (ret & MDIO_MMD_PCS_MV_100BT1_STAT1_LINK)
@@ -120,24 +283,90 @@ out:
 
 static int mv88q2xxx_read_link(struct phy_device *phydev)
 {
-	int ret;
-
 	/* The 88Q2XXX PHYs do not have the PMA/PMD status register available,
 	 * therefore we need to read the link status from the vendor specific
 	 * registers depending on the speed.
 	 */
+
 	if (phydev->speed == SPEED_1000)
-		ret = mv88q2xxx_read_link_gbit(phydev);
+		return mv88q2xxx_read_link_gbit(phydev);
+	else if (phydev->speed == SPEED_100)
+		return mv88q2xxx_read_link_100m(phydev);
+
+	phydev->link = false;
+	return 0;
+}
+
+static int mv88q2xxx_read_master_slave_state(struct phy_device *phydev)
+{
+	int ret;
+
+	phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MDIO_MMD_AN_MV_STAT_LOCAL_MASTER)
+		phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
 	else
-		ret = mv88q2xxx_read_link_100m(phydev);
+		phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+
+	return 0;
+}
+
+static int mv88q2xxx_read_aneg_speed(struct phy_device *phydev)
+{
+	int ret;
+
+	phydev->speed = SPEED_UNKNOWN;
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT2);
+	if (ret < 0)
+		return ret;
 
-	return ret;
+	if (!(ret & MDIO_MMD_AN_MV_STAT2_AN_RESOLVED))
+		return 0;
+
+	if (ret & MDIO_MMD_AN_MV_STAT2_100BT1)
+		phydev->speed = SPEED_100;
+	else if (ret & MDIO_MMD_AN_MV_STAT2_1000BT1)
+		phydev->speed = SPEED_1000;
+
+	return 0;
 }
 
 static int mv88q2xxx_read_status(struct phy_device *phydev)
 {
 	int ret;
 
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		/* We have to get the negotiated speed first, otherwise we are
+		 * not able to read the link.
+		 */
+		ret = mv88q2xxx_read_aneg_speed(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = mv88q2xxx_read_link(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = genphy_c45_read_lpa(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = genphy_c45_baset1_read_status(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = mv88q2xxx_read_master_slave_state(phydev);
+		if (ret < 0)
+			return ret;
+
+		phy_resolve_aneg_linkmode(phydev);
+
+		return 0;
+	}
+
 	ret = mv88q2xxx_read_link(phydev);
 	if (ret < 0)
 		return ret;
@@ -166,7 +395,9 @@ static int mv88q2xxx_get_features(struct phy_device *phydev)
 	 * sequence provided by Marvell. Disable it for now until a proper
 	 * workaround is found or a new PHY revision is released.
 	 */
-	linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+	if (phydev->drv->phy_id == MARVELL_PHY_ID_88Q2110)
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				   phydev->supported);
 
 	return 0;
 }
@@ -179,28 +410,29 @@ static int mv88q2xxx_config_aneg(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	return mv88q2xxx_soft_reset(phydev);
+	return phydev->drv->soft_reset(phydev);
 }
 
 static int mv88q2xxx_config_init(struct phy_device *phydev)
 {
-	int ret;
-
 	/* The 88Q2XXX PHYs do have the extended ability register available, but
 	 * register MDIO_PMA_EXTABLE where they should signalize it does not
 	 * work according to specification. Therefore, we force it here.
 	 */
 	phydev->pma_extable = MDIO_PMA_EXTABLE_BT1;
 
-	/* Read the current PHY configuration */
-	ret = genphy_c45_read_pma(phydev);
-	if (ret)
-		return ret;
+	/* Configure interrupt with default settings, output is driven low for
+	 * active interrupt and high for inactive.
+	 */
+	if (phy_interrupt_is_valid(phydev))
+		return phy_set_bits_mmd(phydev, MDIO_MMD_PCS,
+					MDIO_MMD_PCS_MV_GPIO_INT_CTRL,
+					MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS);
 
-	return mv88q2xxx_config_aneg(phydev);
+	return 0;
 }
 
-static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
+static int mv88q2xxx_get_sqi(struct phy_device *phydev)
 {
 	int ret;
 
@@ -208,7 +440,8 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
 		/* Read the SQI from the vendor specific receiver status
 		 * register
 		 */
-		ret = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x8230);
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_RX_STAT);
 		if (ret < 0)
 			return ret;
 
@@ -218,7 +451,7 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
 		 * but can be found in the Software Initialization Guide. Only
 		 * revisions >= A0 are supported.
 		 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, 0xFC5D, 0x00FF, 0x00AC);
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, 0xfc5d, 0xff, 0xac);
 		if (ret < 0)
 			return ret;
 
@@ -227,14 +460,427 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
 			return ret;
 	}
 
-	return ret & 0x0F;
+	return ret & 0x0f;
 }
 
-static int mv88q2xxxx_get_sqi_max(struct phy_device *phydev)
+static int mv88q2xxx_get_sqi_max(struct phy_device *phydev)
 {
 	return 15;
 }
 
+static int mv88q2xxx_config_intr(struct phy_device *phydev)
+{
+	int ret;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* Enable interrupts for 1000BASE-T1 link up and down events
+		 * and enable general interrupts for 100BASE-T1.
+		 */
+		ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+				    MDIO_MMD_PCS_MV_INT_EN,
+				    MDIO_MMD_PCS_MV_INT_EN_LINK_UP |
+				    MDIO_MMD_PCS_MV_INT_EN_LINK_DOWN |
+				    MDIO_MMD_PCS_MV_INT_EN_100BT1);
+		if (ret < 0)
+			return ret;
+
+		/* Enable interrupts for 100BASE-T1 link events */
+		return phy_write_mmd(phydev, MDIO_MMD_PCS,
+				     MDIO_MMD_PCS_MV_100BT1_INT_EN,
+				     MDIO_MMD_PCS_MV_100BT1_INT_EN_LINKEVENT);
+	} else {
+		ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+				    MDIO_MMD_PCS_MV_INT_EN, 0);
+		if (ret < 0)
+			return ret;
+
+		return phy_write_mmd(phydev, MDIO_MMD_PCS,
+				     MDIO_MMD_PCS_MV_100BT1_INT_EN, 0);
+	}
+}
+
+static irqreturn_t mv88q2xxx_handle_interrupt(struct phy_device *phydev)
+{
+	bool trigger_machine = false;
+	int irq;
+
+	/* Before we can acknowledge the 100BT1 general interrupt, that is in
+	 * the 1000BT1 interrupt status register, we have to acknowledge any
+	 * interrupts that are related to it. Therefore we read first the 100BT1
+	 * interrupt status register, followed by reading the 1000BT1 interrupt
+	 * status register.
+	 */
+
+	irq = phy_read_mmd(phydev, MDIO_MMD_PCS,
+			   MDIO_MMD_PCS_MV_COPPER_INT_STAT);
+	if (irq < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* Check link status for 100BT1 */
+	if (irq & MDIO_MMD_PCS_MV_COPPER_INT_STAT_LINKEVENT)
+		trigger_machine = true;
+
+	irq = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_GPIO_INT_STAT);
+	if (irq < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* Check link status for 1000BT1 */
+	if ((irq & MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_UP) ||
+	    (irq & MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_DOWN))
+		trigger_machine = true;
+
+	if (!trigger_machine)
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int mv88q2xxx_suspend(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Disable PHY interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_DISABLED;
+		ret = mv88q2xxx_config_intr(phydev);
+		if (ret)
+			return ret;
+	}
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				MDIO_CTRL1_LPOWER);
+}
+
+static int mv88q2xxx_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable PHY interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		ret = mv88q2xxx_config_intr(phydev);
+		if (ret)
+			return ret;
+	}
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				  MDIO_CTRL1_LPOWER);
+}
+
+#if IS_ENABLED(CONFIG_HWMON)
+static const struct hwmon_channel_info * const mv88q2xxx_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_ALARM),
+	NULL
+};
+
+static umode_t mv88q2xxx_hwmon_is_visible(const void *data,
+					  enum hwmon_sensor_types type,
+					  u32 attr, int channel)
+{
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	case hwmon_temp_max:
+		return 0644;
+	case hwmon_temp_alarm:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int mv88q2xxx_hwmon_read(struct device *dev,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel, long *val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	int ret;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_TEMP_SENSOR3);
+		if (ret < 0)
+			return ret;
+
+		ret = FIELD_GET(MDIO_MMD_PCS_MV_TEMP_SENSOR3_MASK, ret);
+		*val = (ret - 75) * 1000;
+		return 0;
+	case hwmon_temp_max:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_TEMP_SENSOR3);
+		if (ret < 0)
+			return ret;
+
+		ret = FIELD_GET(MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK,
+				ret);
+		*val = (ret - 75) * 1000;
+		return 0;
+	case hwmon_temp_alarm:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_TEMP_SENSOR1);
+		if (ret < 0)
+			return ret;
+
+		*val = !!(ret & MDIO_MMD_PCS_MV_TEMP_SENSOR1_RAW_INT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int mv88q2xxx_hwmon_write(struct device *dev,
+				 enum hwmon_sensor_types type, u32 attr,
+				 int channel, long val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_temp_max:
+		clamp_val(val, -75000, 180000);
+		val = (val / 1000) + 75;
+		val = FIELD_PREP(MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK,
+				 val);
+		return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+				      MDIO_MMD_PCS_MV_TEMP_SENSOR3,
+				      MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK,
+				      val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops mv88q2xxx_hwmon_hwmon_ops = {
+	.is_visible = mv88q2xxx_hwmon_is_visible,
+	.read = mv88q2xxx_hwmon_read,
+	.write = mv88q2xxx_hwmon_write,
+};
+
+static const struct hwmon_chip_info mv88q2xxx_hwmon_chip_info = {
+	.ops = &mv88q2xxx_hwmon_hwmon_ops,
+	.info = mv88q2xxx_hwmon_info,
+};
+
+static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct device *hwmon;
+	char *hwmon_name;
+	int ret;
+
+	/* Enable temperature sense */
+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TEMP_SENSOR2,
+			     MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0);
+	if (ret < 0)
+		return ret;
+
+	hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev));
+	if (IS_ERR(hwmon_name))
+		return PTR_ERR(hwmon_name);
+
+	hwmon = devm_hwmon_device_register_with_info(dev,
+						     hwmon_name,
+						     phydev,
+						     &mv88q2xxx_hwmon_chip_info,
+						     NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon);
+}
+
+#else
+static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif
+
+static int mv88q2xxx_probe(struct phy_device *phydev)
+{
+	return mv88q2xxx_hwmon_probe(phydev);
+}
+
+static int mv88q222x_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable RESET of DCL */
+	if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed == SPEED_1000) {
+		ret = phy_write_mmd(phydev, MDIO_MMD_PCS, 0xfe1b, 0x48);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_CTRL,
+			    MDIO_PCS_1000BT1_CTRL_RESET);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, 0xffe4, 0xc);
+	if (ret < 0)
+		return ret;
+
+	/* Disable RESET of DCL */
+	if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed == SPEED_1000)
+		return phy_write_mmd(phydev, MDIO_MMD_PCS, 0xfe1b, 0x58);
+
+	return 0;
+}
+
+static int mv88q222x_write_mmd_vals(struct phy_device *phydev,
+				    const struct mmd_val *vals, size_t len)
+{
+	int ret;
+
+	for (; len; vals++, len--) {
+		ret = phy_write_mmd(phydev, vals->devad, vals->regnum,
+				    vals->val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int mv88q222x_revb0_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq0,
+				       ARRAY_SIZE(mv88q222x_revb0_init_seq0));
+	if (ret < 0)
+		return ret;
+
+	usleep_range(5000, 10000);
+
+	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq1,
+				       ARRAY_SIZE(mv88q222x_revb0_init_seq1));
+	if (ret < 0)
+		return ret;
+
+	return mv88q2xxx_config_init(phydev);
+}
+
+static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev)
+{
+	bool is_rev_b1 = phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB1;
+	int ret;
+
+	if (is_rev_b1)
+		ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_init_seq0,
+					       ARRAY_SIZE(mv88q222x_revb1_init_seq0));
+	else
+		ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb2_init_seq0,
+					       ARRAY_SIZE(mv88q222x_revb2_init_seq0));
+	if (ret < 0)
+		return ret;
+
+	usleep_range(3000, 5000);
+
+	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_revb2_init_seq1,
+				       ARRAY_SIZE(mv88q222x_revb1_revb2_init_seq1));
+	if (ret < 0)
+		return ret;
+
+	return mv88q2xxx_config_init(phydev);
+}
+
+static int mv88q222x_config_init(struct phy_device *phydev)
+{
+	if (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB0)
+		return mv88q222x_revb0_config_init(phydev);
+	else
+		return mv88q222x_revb1_revb2_config_init(phydev);
+}
+
+static int mv88q222x_cable_test_start(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			    MDIO_MMD_PCS_MV_TDR_OFF_CUTOFF, 0x0058);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			    MDIO_MMD_PCS_MV_TDR_OFF_LONG_CABLE, 0x00eb);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			    MDIO_MMD_PCS_MV_TDR_OFF_SHORT_CABLE, 0x010e);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_RESET,
+			    0x0d90);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_STATUS,
+			    MDIO_MMD_PCS_MV_TDR_STATUS_ON);
+	if (ret < 0)
+		return ret;
+
+	/* According to the Marvell API the test is finished within 500 ms */
+	msleep(500);
+
+	return 0;
+}
+
+static int mv88q222x_cable_test_get_status(struct phy_device *phydev,
+					   bool *finished)
+{
+	int ret, status;
+	u32 dist;
+
+	status = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_STATUS);
+	if (status < 0)
+		return status;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_RESET,
+			    MDIO_MMD_PCS_MV_TDR_RESET_TDR_RST | 0xd90);
+	if (ret < 0)
+		return ret;
+
+	/* Test could not be finished */
+	if (FIELD_GET(MDIO_MMD_PCS_MV_TDR_STATUS_MASK, status) !=
+	    MDIO_MMD_PCS_MV_TDR_STATUS_OFF)
+		return -ETIMEDOUT;
+
+	*finished = true;
+	/* Fault length reported in meters, convert to centimeters */
+	dist = FIELD_GET(MDIO_MMD_PCS_MV_TDR_STATUS_DIST_MASK, status) * 100;
+	switch (status & MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_MASK) {
+	case MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OPEN:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_OPEN);
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					      dist);
+		break;
+	case MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_SHORT:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT);
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					      dist);
+		break;
+	case MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OK:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_OK);
+		break;
+	default:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC);
+	}
+
+	return 0;
+}
+
 static struct phy_driver mv88q2xxx_driver[] = {
 	{
 		.phy_id			= MARVELL_PHY_ID_88Q2110,
@@ -246,8 +892,30 @@ static struct phy_driver mv88q2xxx_driver[] = {
 		.read_status		= mv88q2xxx_read_status,
 		.soft_reset		= mv88q2xxx_soft_reset,
 		.set_loopback		= genphy_c45_loopback,
-		.get_sqi		= mv88q2xxxx_get_sqi,
-		.get_sqi_max		= mv88q2xxxx_get_sqi_max,
+		.get_sqi		= mv88q2xxx_get_sqi,
+		.get_sqi_max		= mv88q2xxx_get_sqi_max,
+	},
+	{
+		.phy_id			= MARVELL_PHY_ID_88Q2220,
+		.phy_id_mask		= MARVELL_PHY_ID_MASK,
+		.name			= "mv88q2220",
+		.flags			= PHY_POLL_CABLE_TEST,
+		.probe			= mv88q2xxx_probe,
+		.get_features		= mv88q2xxx_get_features,
+		.config_aneg		= mv88q2xxx_config_aneg,
+		.aneg_done		= genphy_c45_aneg_done,
+		.config_init		= mv88q222x_config_init,
+		.read_status		= mv88q2xxx_read_status,
+		.soft_reset		= mv88q222x_soft_reset,
+		.config_intr		= mv88q2xxx_config_intr,
+		.handle_interrupt	= mv88q2xxx_handle_interrupt,
+		.set_loopback		= genphy_c45_loopback,
+		.cable_test_start	= mv88q222x_cable_test_start,
+		.cable_test_get_status	= mv88q222x_cable_test_get_status,
+		.get_sqi		= mv88q2xxx_get_sqi,
+		.get_sqi_max		= mv88q2xxx_get_sqi_max,
+		.suspend		= mv88q2xxx_suspend,
+		.resume			= mv88q2xxx_resume,
 	},
 };
 
@@ -255,6 +923,7 @@ module_phy_driver(mv88q2xxx_driver);
 
 static struct mdio_device_id __maybe_unused mv88q2xxx_tbl[] = {
 	{ MARVELL_PHY_ID_88Q2110, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88Q2220, MARVELL_PHY_ID_MASK },
 	{ /*sentinel*/ }
 };
 MODULE_DEVICE_TABLE(mdio, mv88q2xxx_tbl);
diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index e3aa30dad2..b88398e687 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -9,12 +9,10 @@
  */
 #include <linux/module.h>
 #include <linux/phy.h>
-#include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/mdio.h>
 #include <linux/marvell_phy.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/sfp.h>
 #include <linux/netdevice.h>
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index eba652a4c1..42ed013385 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -919,7 +919,10 @@ static int m88e1111_config_init_1000basex(struct phy_device *phydev)
 	if (extsr < 0)
 		return extsr;
 
-	/* If using copper mode, ensure 1000BaseX auto-negotiation is enabled */
+	/* If using copper mode, ensure 1000BaseX auto-negotiation is enabled.
+	 * FIXME: this does not actually enable 1000BaseX auto-negotiation if
+	 * it was previously disabled in the Fiber BMCR!
+	 */
 	mode = extsr & MII_M1111_HWCFG_MODE_MASK;
 	if (mode == MII_M1111_HWCFG_MODE_COPPER_1000X_NOAN) {
 		err = phy_modify(phydev, MII_M1111_PHY_EXT_SR,
@@ -1461,7 +1464,7 @@ static int m88e1540_get_fld(struct phy_device *phydev, u8 *msecs)
 
 static int m88e1540_set_fld(struct phy_device *phydev, const u8 *msecs)
 {
-	struct ethtool_eee eee;
+	struct ethtool_keee eee;
 	int val, ret;
 
 	if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index afbad1ad86..8b9ead76e4 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -13,7 +13,6 @@
 #include <linux/errno.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -25,7 +24,6 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/of_mdio.h>
 #include <linux/phy.h>
 #include <linux/reset.h>
@@ -459,19 +457,34 @@ EXPORT_SYMBOL(of_mdio_find_bus);
  * found, set the of_node pointer for the mdio device. This allows
  * auto-probed phy devices to be supplied with information passed in
  * via DT.
+ * If a PHY package is found, PHY is searched also there.
  */
-static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
-				    struct mdio_device *mdiodev)
+static int of_mdiobus_find_phy(struct device *dev, struct mdio_device *mdiodev,
+			       struct device_node *np)
 {
-	struct device *dev = &mdiodev->dev;
 	struct device_node *child;
 
-	if (dev->of_node || !bus->dev.of_node)
-		return;
-
-	for_each_available_child_of_node(bus->dev.of_node, child) {
+	for_each_available_child_of_node(np, child) {
 		int addr;
 
+		if (of_node_name_eq(child, "ethernet-phy-package")) {
+			/* Validate PHY package reg presence */
+			if (!of_property_present(child, "reg")) {
+				of_node_put(child);
+				return -EINVAL;
+			}
+
+			if (!of_mdiobus_find_phy(dev, mdiodev, child)) {
+				/* The refcount for the PHY package will be
+				 * incremented later when PHY join the Package.
+				 */
+				of_node_put(child);
+				return 0;
+			}
+
+			continue;
+		}
+
 		addr = of_mdio_parse_addr(dev, child);
 		if (addr < 0)
 			continue;
@@ -481,9 +494,22 @@ static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
 			/* The refcount on "child" is passed to the mdio
 			 * device. Do _not_ use of_node_put(child) here.
 			 */
-			return;
+			return 0;
 		}
 	}
+
+	return -ENODEV;
+}
+
+static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
+				    struct mdio_device *mdiodev)
+{
+	struct device *dev = &mdiodev->dev;
+
+	if (dev->of_node || !bus->dev.of_node)
+		return;
+
+	of_mdiobus_find_phy(dev, mdiodev, bus->dev.of_node);
 }
 #else /* !IS_ENABLED(CONFIG_OF_MDIO) */
 static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
@@ -1398,7 +1424,7 @@ static const struct attribute_group *mdio_bus_dev_groups[] = {
 	NULL,
 };
 
-struct bus_type mdio_bus_type = {
+const struct bus_type mdio_bus_type = {
 	.name		= "mdio_bus",
 	.dev_groups	= mdio_bus_dev_groups,
 	.match		= mdio_bus_match,
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 827db6a6ff..4b22bb6393 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -114,12 +114,25 @@
 #define LAN8814_INTR_CTRL_REG_POLARITY		BIT(1)
 #define LAN8814_INTR_CTRL_REG_INTR_ENABLE	BIT(0)
 
+#define LAN8814_EEE_STATE			0x38
+#define LAN8814_EEE_STATE_MASK2P5P		BIT(10)
+
+#define LAN8814_PD_CONTROLS			0x9d
+#define LAN8814_PD_CONTROLS_PD_MEAS_TIME_MASK	GENMASK(3, 0)
+#define LAN8814_PD_CONTROLS_PD_MEAS_TIME_VAL	0xb
+
 /* Represents 1ppm adjustment in 2^32 format with
  * each nsec contains 4 clock cycles.
  * The value is calculated as following: (1/1000000)/((2^-32)/4)
  */
 #define LAN8814_1PPM_FORMAT			17179
 
+/* Represents 1ppm adjustment in 2^32 format with
+ * each nsec contains 8 clock cycles.
+ * The value is calculated as following: (1/1000000)/((2^-32)/8)
+ */
+#define LAN8841_1PPM_FORMAT			34360
+
 #define PTP_RX_VERSION				0x0248
 #define PTP_TX_VERSION				0x0288
 #define PTP_MAX_VERSION(x)			(((x) & GENMASK(7, 0)) << 8)
@@ -154,11 +167,13 @@
 #define PTP_CMD_CTL_PTP_LTC_STEP_SEC_		BIT(5)
 #define PTP_CMD_CTL_PTP_LTC_STEP_NSEC_		BIT(6)
 
+#define PTP_CLOCK_SET_SEC_HI			0x0205
 #define PTP_CLOCK_SET_SEC_MID			0x0206
 #define PTP_CLOCK_SET_SEC_LO			0x0207
 #define PTP_CLOCK_SET_NS_HI			0x0208
 #define PTP_CLOCK_SET_NS_LO			0x0209
 
+#define PTP_CLOCK_READ_SEC_HI			0x0229
 #define PTP_CLOCK_READ_SEC_MID			0x022A
 #define PTP_CLOCK_READ_SEC_LO			0x022B
 #define PTP_CLOCK_READ_NS_HI			0x022C
@@ -770,6 +785,17 @@ static int ksz8061_config_init(struct phy_device *phydev)
 {
 	int ret;
 
+	/* Chip can be powered down by the bootstrap code. */
+	ret = phy_read(phydev, MII_BMCR);
+	if (ret < 0)
+		return ret;
+	if (ret & BMCR_PDOWN) {
+		ret = phy_write(phydev, MII_BMCR, ret & ~BMCR_PDOWN);
+		if (ret < 0)
+			return ret;
+		usleep_range(1000, 2000);
+	}
+
 	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
 	if (ret)
 		return ret;
@@ -1843,7 +1869,7 @@ static const struct ksz9477_errata_write ksz9477_errata_writes[] = {
 	{0x1c, 0x20, 0xeeee},
 };
 
-static int ksz9477_config_init(struct phy_device *phydev)
+static int ksz9477_phy_errata(struct phy_device *phydev)
 {
 	int err;
 	int i;
@@ -1871,16 +1897,30 @@ static int ksz9477_config_init(struct phy_device *phydev)
 			return err;
 	}
 
+	err = genphy_restart_aneg(phydev);
+	if (err)
+		return err;
+
+	return err;
+}
+
+static int ksz9477_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Only KSZ9897 family of switches needs this fix. */
+	if ((phydev->phy_id & 0xf) == 1) {
+		err = ksz9477_phy_errata(phydev);
+		if (err)
+			return err;
+	}
+
 	/* According to KSZ9477 Errata DS80000754C (Module 4) all EEE modes
 	 * in this switch shall be regarded as broken.
 	 */
 	if (phydev->dev_flags & MICREL_NO_EEE)
 		phydev->eee_broken_modes = -1;
 
-	err = genphy_restart_aneg(phydev);
-	if (err)
-		return err;
-
 	return kszphy_config_init(phydev);
 }
 
@@ -1989,6 +2029,71 @@ static int kszphy_resume(struct phy_device *phydev)
 	return 0;
 }
 
+static int ksz9477_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* No need to initialize registers if not powered down. */
+	ret = phy_read(phydev, MII_BMCR);
+	if (ret < 0)
+		return ret;
+	if (!(ret & BMCR_PDOWN))
+		return 0;
+
+	genphy_resume(phydev);
+
+	/* After switching from power-down to normal mode, an internal global
+	 * reset is automatically generated. Wait a minimum of 1 ms before
+	 * read/write access to the PHY registers.
+	 */
+	usleep_range(1000, 2000);
+
+	/* Only KSZ9897 family of switches needs this fix. */
+	if ((phydev->phy_id & 0xf) == 1) {
+		ret = ksz9477_phy_errata(phydev);
+		if (ret)
+			return ret;
+	}
+
+	/* Enable PHY Interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
+	}
+
+	return 0;
+}
+
+static int ksz8061_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* This function can be called twice when the Ethernet device is on. */
+	ret = phy_read(phydev, MII_BMCR);
+	if (ret < 0)
+		return ret;
+	if (!(ret & BMCR_PDOWN))
+		return 0;
+
+	genphy_resume(phydev);
+	usleep_range(1000, 2000);
+
+	/* Re-program the value after chip is reset. */
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+	if (ret)
+		return ret;
+
+	/* Enable PHY Interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
+	}
+
+	return 0;
+}
+
 static int kszphy_probe(struct phy_device *phydev)
 {
 	const struct kszphy_type *type = phydev->drv->driver_data;
@@ -2603,35 +2708,31 @@ static bool lan8814_rxtstamp(struct mii_timestamper *mii_ts, struct sk_buff *skb
 }
 
 static void lan8814_ptp_clock_set(struct phy_device *phydev,
-				  u32 seconds, u32 nano_seconds)
+				  time64_t sec, u32 nsec)
 {
-	u32 sec_low, sec_high, nsec_low, nsec_high;
-
-	sec_low = seconds & 0xffff;
-	sec_high = (seconds >> 16) & 0xffff;
-	nsec_low = nano_seconds & 0xffff;
-	nsec_high = (nano_seconds >> 16) & 0x3fff;
-
-	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_SEC_LO, sec_low);
-	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_SEC_MID, sec_high);
-	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_NS_LO, nsec_low);
-	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_NS_HI, nsec_high);
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_SEC_LO, lower_16_bits(sec));
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_SEC_MID, upper_16_bits(sec));
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_SEC_HI, upper_32_bits(sec));
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_NS_LO, lower_16_bits(nsec));
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_NS_HI, upper_16_bits(nsec));
 
 	lanphy_write_page_reg(phydev, 4, PTP_CMD_CTL, PTP_CMD_CTL_PTP_CLOCK_LOAD_);
 }
 
 static void lan8814_ptp_clock_get(struct phy_device *phydev,
-				  u32 *seconds, u32 *nano_seconds)
+				  time64_t *sec, u32 *nsec)
 {
 	lanphy_write_page_reg(phydev, 4, PTP_CMD_CTL, PTP_CMD_CTL_PTP_CLOCK_READ_);
 
-	*seconds = lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_SEC_MID);
-	*seconds = (*seconds << 16) |
-		   lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_SEC_LO);
+	*sec = lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_SEC_HI);
+	*sec <<= 16;
+	*sec |= lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_SEC_MID);
+	*sec <<= 16;
+	*sec |= lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_SEC_LO);
 
-	*nano_seconds = lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_NS_HI);
-	*nano_seconds = ((*nano_seconds & 0x3fff) << 16) |
-			lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_NS_LO);
+	*nsec = lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_NS_HI);
+	*nsec <<= 16;
+	*nsec |= lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_NS_LO);
 }
 
 static int lan8814_ptpci_gettime64(struct ptp_clock_info *ptpci,
@@ -2641,7 +2742,7 @@ static int lan8814_ptpci_gettime64(struct ptp_clock_info *ptpci,
 							  ptp_clock_info);
 	struct phy_device *phydev = shared->phydev;
 	u32 nano_seconds;
-	u32 seconds;
+	time64_t seconds;
 
 	mutex_lock(&shared->shared_lock);
 	lan8814_ptp_clock_get(phydev, &seconds, &nano_seconds);
@@ -2671,38 +2772,37 @@ static void lan8814_ptp_clock_step(struct phy_device *phydev,
 {
 	u32 nano_seconds_step;
 	u64 abs_time_step_ns;
-	u32 unsigned_seconds;
+	time64_t set_seconds;
 	u32 nano_seconds;
 	u32 remainder;
 	s32 seconds;
 
 	if (time_step_ns >  15000000000LL) {
 		/* convert to clock set */
-		lan8814_ptp_clock_get(phydev, &unsigned_seconds, &nano_seconds);
-		unsigned_seconds += div_u64_rem(time_step_ns, 1000000000LL,
-						&remainder);
+		lan8814_ptp_clock_get(phydev, &set_seconds, &nano_seconds);
+		set_seconds += div_u64_rem(time_step_ns, 1000000000LL,
+					   &remainder);
 		nano_seconds += remainder;
 		if (nano_seconds >= 1000000000) {
-			unsigned_seconds++;
+			set_seconds++;
 			nano_seconds -= 1000000000;
 		}
-		lan8814_ptp_clock_set(phydev, unsigned_seconds, nano_seconds);
+		lan8814_ptp_clock_set(phydev, set_seconds, nano_seconds);
 		return;
 	} else if (time_step_ns < -15000000000LL) {
 		/* convert to clock set */
 		time_step_ns = -time_step_ns;
 
-		lan8814_ptp_clock_get(phydev, &unsigned_seconds, &nano_seconds);
-		unsigned_seconds -= div_u64_rem(time_step_ns, 1000000000LL,
-						&remainder);
+		lan8814_ptp_clock_get(phydev, &set_seconds, &nano_seconds);
+		set_seconds -= div_u64_rem(time_step_ns, 1000000000LL,
+					   &remainder);
 		nano_seconds_step = remainder;
 		if (nano_seconds < nano_seconds_step) {
-			unsigned_seconds--;
+			set_seconds--;
 			nano_seconds += 1000000000;
 		}
 		nano_seconds -= nano_seconds_step;
-		lan8814_ptp_clock_set(phydev, unsigned_seconds,
-				      nano_seconds);
+		lan8814_ptp_clock_set(phydev, set_seconds, nano_seconds);
 		return;
 	}
 
@@ -3302,6 +3402,33 @@ static int lan8814_release_coma_mode(struct phy_device *phydev)
 	return 0;
 }
 
+static void lan8814_clear_2psp_bit(struct phy_device *phydev)
+{
+	u16 val;
+
+	/* It was noticed that when traffic is passing through the PHY and the
+	 * cable is removed then the LED was still one even though there is no
+	 * link
+	 */
+	val = lanphy_read_page_reg(phydev, 2, LAN8814_EEE_STATE);
+	val &= ~LAN8814_EEE_STATE_MASK2P5P;
+	lanphy_write_page_reg(phydev, 2, LAN8814_EEE_STATE, val);
+}
+
+static void lan8814_update_meas_time(struct phy_device *phydev)
+{
+	u16 val;
+
+	/* By setting the measure time to a value of 0xb this will allow cables
+	 * longer than 100m to be used. This configuration can be used
+	 * regardless of the mode of operation of the PHY
+	 */
+	val = lanphy_read_page_reg(phydev, 1, LAN8814_PD_CONTROLS);
+	val &= ~LAN8814_PD_CONTROLS_PD_MEAS_TIME_MASK;
+	val |= LAN8814_PD_CONTROLS_PD_MEAS_TIME_VAL;
+	lanphy_write_page_reg(phydev, 1, LAN8814_PD_CONTROLS, val);
+}
+
 static int lan8814_probe(struct phy_device *phydev)
 {
 	const struct kszphy_type *type = phydev->drv->driver_data;
@@ -3338,6 +3465,10 @@ static int lan8814_probe(struct phy_device *phydev)
 
 	lan8814_ptp_init(phydev);
 
+	/* Errata workarounds */
+	lan8814_clear_2psp_bit(phydev);
+	lan8814_update_meas_time(phydev);
+
 	return 0;
 }
 
@@ -3475,7 +3606,7 @@ static int lan8841_config_intr(struct phy_device *phydev)
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		err = phy_read(phydev, LAN8814_INTS);
-		if (err)
+		if (err < 0)
 			return err;
 
 		/* Enable / disable interrupts. It is OK to enable PTP interrupt
@@ -3491,6 +3622,14 @@ static int lan8841_config_intr(struct phy_device *phydev)
 			return err;
 
 		err = phy_read(phydev, LAN8814_INTS);
+		if (err < 0)
+			return err;
+
+		/* Getting a positive value doesn't mean that is an error, it
+		 * just indicates what was the status. Therefore make sure to
+		 * clear the value and say that there is no error.
+		 */
+		err = 0;
 	}
 
 	return err;
@@ -4135,8 +4274,8 @@ static int lan8841_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
 		faster = false;
 	}
 
-	rate = LAN8814_1PPM_FORMAT * (upper_16_bits(scaled_ppm));
-	rate += (LAN8814_1PPM_FORMAT * (lower_16_bits(scaled_ppm))) >> 16;
+	rate = LAN8841_1PPM_FORMAT * (upper_16_bits(scaled_ppm));
+	rate += (LAN8841_1PPM_FORMAT * (lower_16_bits(scaled_ppm))) >> 16;
 
 	mutex_lock(&ptp_priv->ptp_lock);
 	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_RATE_ADJ_HI,
@@ -4773,10 +4912,11 @@ static struct phy_driver ksphy_driver[] = {
 	/* PHY_BASIC_FEATURES */
 	.probe		= kszphy_probe,
 	.config_init	= ksz8061_config_init,
+	.soft_reset	= genphy_soft_reset,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.suspend	= kszphy_suspend,
-	.resume		= kszphy_resume,
+	.resume		= ksz8061_resume,
 }, {
 	.phy_id		= PHY_ID_KSZ9021,
 	.phy_id_mask	= 0x000ffffe,
@@ -4930,7 +5070,7 @@ static struct phy_driver ksphy_driver[] = {
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.suspend	= genphy_suspend,
-	.resume		= genphy_resume,
+	.resume		= ksz9477_resume,
 	.get_features	= ksz9477_get_features,
 } };
 
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index ea1073adc5..e5f8ac4b46 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -107,6 +107,7 @@ struct gpy_priv {
 
 	u8 fw_major;
 	u8 fw_minor;
+	u32 wolopts;
 
 	/* It takes 3 seconds to fully switch out of loopback mode before
 	 * it can safely re-enter loopback mode. Record the time when
@@ -221,6 +222,15 @@ static int gpy_hwmon_register(struct phy_device *phydev)
 }
 #endif
 
+static int gpy_ack_interrupt(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Clear all pending interrupts */
+	ret = phy_read(phydev, PHY_ISTAT);
+	return ret < 0 ? ret : 0;
+}
+
 static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
 {
 	struct gpy_priv *priv = phydev->priv;
@@ -262,16 +272,16 @@ out:
 
 static int gpy_config_init(struct phy_device *phydev)
 {
-	int ret;
+	/* Nothing to configure. Configuration Requirement Placeholder */
+	return 0;
+}
 
-	/* Mask all interrupts */
-	ret = phy_write(phydev, PHY_IMASK, 0);
-	if (ret)
-		return ret;
+static int gpy21x_config_init(struct phy_device *phydev)
+{
+	__set_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->possible_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_SGMII, phydev->possible_interfaces);
 
-	/* Clear all pending interrupts */
-	ret = phy_read(phydev, PHY_ISTAT);
-	return ret < 0 ? ret : 0;
+	return gpy_config_init(phydev);
 }
 
 static int gpy_probe(struct phy_device *phydev)
@@ -619,11 +629,23 @@ static int gpy_read_status(struct phy_device *phydev)
 
 static int gpy_config_intr(struct phy_device *phydev)
 {
+	struct gpy_priv *priv = phydev->priv;
 	u16 mask = 0;
+	int ret;
+
+	ret = gpy_ack_interrupt(phydev);
+	if (ret)
+		return ret;
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		mask = PHY_IMASK_MASK;
 
+	if (priv->wolopts & WAKE_MAGIC)
+		mask |= PHY_IMASK_WOL;
+
+	if (priv->wolopts & WAKE_PHY)
+		mask |= PHY_IMASK_LSTC;
+
 	return phy_write(phydev, PHY_IMASK, mask);
 }
 
@@ -670,6 +692,7 @@ static int gpy_set_wol(struct phy_device *phydev,
 		       struct ethtool_wolinfo *wol)
 {
 	struct net_device *attach_dev = phydev->attached_dev;
+	struct gpy_priv *priv = phydev->priv;
 	int ret;
 
 	if (wol->wolopts & WAKE_MAGIC) {
@@ -717,6 +740,8 @@ static int gpy_set_wol(struct phy_device *phydev,
 		ret = phy_read(phydev, PHY_ISTAT);
 		if (ret < 0)
 			return ret;
+
+		priv->wolopts |= WAKE_MAGIC;
 	} else {
 		/* Disable magic packet matching */
 		ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
@@ -724,6 +749,13 @@ static int gpy_set_wol(struct phy_device *phydev,
 					 WOL_EN);
 		if (ret < 0)
 			return ret;
+
+		/* Disable the WOL interrupt */
+		ret = phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_WOL);
+		if (ret < 0)
+			return ret;
+
+		priv->wolopts &= ~WAKE_MAGIC;
 	}
 
 	if (wol->wolopts & WAKE_PHY) {
@@ -740,9 +772,11 @@ static int gpy_set_wol(struct phy_device *phydev,
 		if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
 			phy_trigger_machine(phydev);
 
+		priv->wolopts |= WAKE_PHY;
 		return 0;
 	}
 
+	priv->wolopts &= ~WAKE_PHY;
 	/* Disable the link state change interrupt */
 	return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
 }
@@ -750,18 +784,10 @@ static int gpy_set_wol(struct phy_device *phydev,
 static void gpy_get_wol(struct phy_device *phydev,
 			struct ethtool_wolinfo *wol)
 {
-	int ret;
+	struct gpy_priv *priv = phydev->priv;
 
 	wol->supported = WAKE_MAGIC | WAKE_PHY;
-	wol->wolopts = 0;
-
-	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
-	if (ret & WOL_EN)
-		wol->wolopts |= WAKE_MAGIC;
-
-	ret = phy_read(phydev, PHY_IMASK);
-	if (ret & PHY_IMASK_LSTC)
-		wol->wolopts |= WAKE_PHY;
+	wol->wolopts = priv->wolopts;
 }
 
 static int gpy_loopback(struct phy_device *phydev, bool enable)
@@ -867,7 +893,7 @@ static struct phy_driver gpy_drivers[] = {
 		.phy_id_mask	= PHY_ID_GPY21xB_MASK,
 		.name		= "Maxlinear Ethernet GPY211B",
 		.get_features	= genphy_c45_pma_read_abilities,
-		.config_init	= gpy_config_init,
+		.config_init	= gpy21x_config_init,
 		.probe		= gpy_probe,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
@@ -884,7 +910,7 @@ static struct phy_driver gpy_drivers[] = {
 		PHY_ID_MATCH_MODEL(PHY_ID_GPY211C),
 		.name		= "Maxlinear Ethernet GPY211C",
 		.get_features	= genphy_c45_pma_read_abilities,
-		.config_init	= gpy_config_init,
+		.config_init	= gpy21x_config_init,
 		.probe		= gpy_probe,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
@@ -902,7 +928,7 @@ static struct phy_driver gpy_drivers[] = {
 		.phy_id_mask	= PHY_ID_GPY21xB_MASK,
 		.name		= "Maxlinear Ethernet GPY212B",
 		.get_features	= genphy_c45_pma_read_abilities,
-		.config_init	= gpy_config_init,
+		.config_init	= gpy21x_config_init,
 		.probe		= gpy_probe,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
@@ -919,7 +945,7 @@ static struct phy_driver gpy_drivers[] = {
 		PHY_ID_MATCH_MODEL(PHY_ID_GPY212C),
 		.name		= "Maxlinear Ethernet GPY212C",
 		.get_features	= genphy_c45_pma_read_abilities,
-		.config_init	= gpy_config_init,
+		.config_init	= gpy21x_config_init,
 		.probe		= gpy_probe,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
@@ -937,7 +963,7 @@ static struct phy_driver gpy_drivers[] = {
 		.phy_id_mask	= PHY_ID_GPYx15B_MASK,
 		.name		= "Maxlinear Ethernet GPY215B",
 		.get_features	= genphy_c45_pma_read_abilities,
-		.config_init	= gpy_config_init,
+		.config_init	= gpy21x_config_init,
 		.probe		= gpy_probe,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
@@ -954,7 +980,7 @@ static struct phy_driver gpy_drivers[] = {
 		PHY_ID_MATCH_MODEL(PHY_ID_GPY215C),
 		.name		= "Maxlinear Ethernet GPY215C",
 		.get_features	= genphy_c45_pma_read_abilities,
-		.config_init	= gpy_config_init,
+		.config_init	= gpy21x_config_init,
 		.probe		= gpy_probe,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 747d14bf15..5695935fdc 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -208,7 +208,8 @@ static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
 
 	adv_l_mask = MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP |
 		MDIO_AN_T1_ADV_L_PAUSE_ASYM;
-	adv_m_mask = MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
+	adv_m_mask = MDIO_AN_T1_ADV_M_1000BT1 | MDIO_AN_T1_ADV_M_100BT1 |
+		MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
 
 	switch (phydev->master_slave_set) {
 	case MASTER_SLAVE_CFG_MASTER_FORCE:
@@ -706,6 +707,22 @@ int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv)
 			changed = 1;
 	}
 
+	if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+		val = linkmode_to_mii_eee_cap2_t(adv);
+
+		/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
+		 * (Register 7.62)
+		 */
+		val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
+					     MDIO_AN_EEE_ADV2,
+					     MDIO_EEE_2_5GT | MDIO_EEE_5GT,
+					     val);
+		if (val < 0)
+			return val;
+		if (val > 0)
+			changed = 1;
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported_eee)) {
 		val = linkmode_adv_to_mii_10base_t1_t(adv);
@@ -745,6 +762,17 @@ int genphy_c45_read_eee_adv(struct phy_device *phydev, unsigned long *adv)
 		mii_eee_cap1_mod_linkmode_t(adv, val);
 	}
 
+	if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+		/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
+		 * (Register 7.62)
+		 */
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2);
+		if (val < 0)
+			return val;
+
+		mii_eee_cap2_mod_linkmode_adv_t(adv, val);
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported_eee)) {
 		/* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register
@@ -781,6 +809,17 @@ static int genphy_c45_read_eee_lpa(struct phy_device *phydev,
 		mii_eee_cap1_mod_linkmode_t(lpa, val);
 	}
 
+	if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+		/* IEEE 802.3-2022 45.2.7.17 EEE link partner ability 2
+		 * (Register 7.63)
+		 */
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE2);
+		if (val < 0)
+			return val;
+
+		mii_eee_cap2_mod_linkmode_adv_t(lpa, val);
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported_eee)) {
 		/* IEEE 802.3cg-2019 45.2.7.26 10BASE-T1 AN status register
@@ -831,6 +870,30 @@ static int genphy_c45_read_eee_cap1(struct phy_device *phydev)
 }
 
 /**
+ * genphy_c45_read_eee_cap2 - read supported EEE link modes from register 3.21
+ * @phydev: target phy_device struct
+ */
+static int genphy_c45_read_eee_cap2(struct phy_device *phydev)
+{
+	int val;
+
+	/* IEEE 802.3-2022 45.2.3.11 EEE control and capability 2
+	 * (Register 3.21)
+	 */
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE2);
+	if (val < 0)
+		return val;
+
+	/* IEEE 802.3-2022 45.2.3.11 says 9 bits are reserved. */
+	if (val == 0xffff)
+		return 0;
+
+	mii_eee_cap2_mod_linkmode_sup_t(phydev->supported_eee, val);
+
+	return 0;
+}
+
+/**
  * genphy_c45_read_eee_abilities - read supported EEE link modes
  * @phydev: target phy_device struct
  */
@@ -848,6 +911,13 @@ int genphy_c45_read_eee_abilities(struct phy_device *phydev)
 			return val;
 	}
 
+	/* Same for cap2 (3.21) */
+	if (linkmode_intersects(phydev->supported, PHY_EEE_CAP2_FEATURES)) {
+		val = genphy_c45_read_eee_cap2(phydev);
+		if (val)
+			return val;
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported)) {
 		/* IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
@@ -1443,17 +1513,17 @@ EXPORT_SYMBOL(genphy_c45_eee_is_active);
 /**
  * genphy_c45_ethtool_get_eee - get EEE supported and status
  * @phydev: target phy_device struct
- * @data: ethtool_eee data
+ * @data: ethtool_keee data
  *
  * Description: it reports the Supported/Advertisement/LP Advertisement
  * capabilities.
  */
 int genphy_c45_ethtool_get_eee(struct phy_device *phydev,
-			       struct ethtool_eee *data)
+			       struct ethtool_keee *data)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {};
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(lp) = {};
-	bool overflow = false, is_enabled;
+	bool is_enabled;
 	int ret;
 
 	ret = genphy_c45_eee_is_active(phydev, adv, lp, &is_enabled);
@@ -1462,17 +1532,9 @@ int genphy_c45_ethtool_get_eee(struct phy_device *phydev,
 
 	data->eee_enabled = is_enabled;
 	data->eee_active = ret;
-
-	if (!ethtool_convert_link_mode_to_legacy_u32(&data->supported,
-						     phydev->supported_eee))
-		overflow = true;
-	if (!ethtool_convert_link_mode_to_legacy_u32(&data->advertised, adv))
-		overflow = true;
-	if (!ethtool_convert_link_mode_to_legacy_u32(&data->lp_advertised, lp))
-		overflow = true;
-
-	if (overflow)
-		phydev_warn(phydev, "Not all supported or advertised EEE link modes were passed to the user space\n");
+	linkmode_copy(data->supported, phydev->supported_eee);
+	linkmode_copy(data->advertised, adv);
+	linkmode_copy(data->lp_advertised, lp);
 
 	return 0;
 }
@@ -1481,50 +1543,53 @@ EXPORT_SYMBOL(genphy_c45_ethtool_get_eee);
 /**
  * genphy_c45_ethtool_set_eee - set EEE supported and status
  * @phydev: target phy_device struct
- * @data: ethtool_eee data
+ * @data: ethtool_keee data
  *
  * Description: sets the Supported/Advertisement/LP Advertisement
  * capabilities. If eee_enabled is false, no links modes are
  * advertised, but the previously advertised link modes are
  * retained. This allows EEE to be enabled/disabled in a
  * non-destructive way.
+ * Returns either error code, 0 if there was no change, or positive
+ * value if there was a change which triggered auto-neg.
  */
 int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
-			       struct ethtool_eee *data)
+			       struct ethtool_keee *data)
 {
 	int ret;
 
 	if (data->eee_enabled) {
-		if (data->advertised) {
-			__ETHTOOL_DECLARE_LINK_MODE_MASK(adv);
+		unsigned long *adv = data->advertised;
 
-			ethtool_convert_legacy_u32_to_link_mode(adv,
-								data->advertised);
-			linkmode_andnot(adv, adv, phydev->supported_eee);
-			if (!linkmode_empty(adv)) {
+		if (!linkmode_empty(adv)) {
+			__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp);
+
+			if (linkmode_andnot(tmp, adv, phydev->supported_eee)) {
 				phydev_warn(phydev, "At least some EEE link modes are not supported.\n");
 				return -EINVAL;
 			}
-
-			ethtool_convert_legacy_u32_to_link_mode(phydev->advertising_eee,
-								data->advertised);
 		} else {
-			linkmode_copy(phydev->advertising_eee,
-				      phydev->supported_eee);
+			adv = phydev->supported_eee;
 		}
 
-		phydev->eee_enabled = true;
-	} else {
-		phydev->eee_enabled = false;
+		linkmode_copy(phydev->advertising_eee, adv);
 	}
 
+	phydev->eee_enabled = data->eee_enabled;
+
 	ret = genphy_c45_an_config_eee_aneg(phydev);
-	if (ret < 0)
-		return ret;
-	if (ret > 0)
-		return phy_restart_aneg(phydev);
+	if (ret > 0) {
+		ret = phy_restart_aneg(phydev);
+		if (ret < 0)
+			return ret;
 
-	return 0;
+		/* explicitly return 1, otherwise (ret > 0) value will be
+		 * overwritten by phy_restart_aneg().
+		 */
+		return 1;
+	}
+
+	return ret;
 }
 EXPORT_SYMBOL(genphy_c45_ethtool_set_eee);
 
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 3376e58e2b..c4236564c1 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -983,9 +983,17 @@ static int phy_check_link_status(struct phy_device *phydev)
 	if (phydev->link && phydev->state != PHY_RUNNING) {
 		phy_check_downshift(phydev);
 		phydev->state = PHY_RUNNING;
+		err = genphy_c45_eee_is_active(phydev,
+					       NULL, NULL, NULL);
+		if (err <= 0)
+			phydev->enable_tx_lpi = false;
+		else
+			phydev->enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled;
+
 		phy_link_up(phydev);
 	} else if (!phydev->link && phydev->state != PHY_NOLINK) {
 		phydev->state = PHY_NOLINK;
+		phydev->enable_tx_lpi = false;
 		phy_link_down(phydev);
 	}
 
@@ -1290,7 +1298,6 @@ int phy_disable_interrupts(struct phy_device *phydev)
 static irqreturn_t phy_interrupt(int irq, void *phy_dat)
 {
 	struct phy_device *phydev = phy_dat;
-	struct phy_driver *drv = phydev->drv;
 	irqreturn_t ret;
 
 	/* Wakeup interrupts may occur during a system sleep transition.
@@ -1316,7 +1323,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
 	}
 
 	mutex_lock(&phydev->lock);
-	ret = drv->handle_interrupt(phydev);
+	ret = phydev->drv->handle_interrupt(phydev);
 	mutex_unlock(&phydev->lock);
 
 	return ret;
@@ -1632,12 +1639,12 @@ EXPORT_SYMBOL(phy_get_eee_err);
 /**
  * phy_ethtool_get_eee - get EEE supported and status
  * @phydev: target phy_device struct
- * @data: ethtool_eee data
+ * @data: ethtool_keee data
  *
- * Description: it reportes the Supported/Advertisement/LP Advertisement
- * capabilities.
+ * Description: reports the Supported/Advertisement/LP Advertisement
+ * capabilities, etc.
  */
-int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data)
 {
 	int ret;
 
@@ -1646,6 +1653,7 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
 
 	mutex_lock(&phydev->lock);
 	ret = genphy_c45_ethtool_get_eee(phydev, data);
+	eeecfg_to_eee(data, &phydev->eee_cfg);
 	mutex_unlock(&phydev->lock);
 
 	return ret;
@@ -1653,13 +1661,43 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
 EXPORT_SYMBOL(phy_ethtool_get_eee);
 
 /**
+ * phy_ethtool_set_eee_noneg - Adjusts MAC LPI configuration without PHY
+ *			       renegotiation
+ * @phydev: pointer to the target PHY device structure
+ * @data: pointer to the ethtool_keee structure containing the new EEE settings
+ *
+ * This function updates the Energy Efficient Ethernet (EEE) configuration
+ * for cases where only the MAC's Low Power Idle (LPI) configuration changes,
+ * without triggering PHY renegotiation. It ensures that the MAC is properly
+ * informed of the new LPI settings by cycling the link down and up, which
+ * is necessary for the MAC to adopt the new configuration. This adjustment
+ * is done only if there is a change in the tx_lpi_enabled or tx_lpi_timer
+ * configuration.
+ */
+static void phy_ethtool_set_eee_noneg(struct phy_device *phydev,
+				      struct ethtool_keee *data)
+{
+	if (phydev->eee_cfg.tx_lpi_enabled != data->tx_lpi_enabled ||
+	    phydev->eee_cfg.tx_lpi_timer != data->tx_lpi_timer) {
+		eee_to_eeecfg(&phydev->eee_cfg, data);
+		phydev->enable_tx_lpi = eeecfg_mac_can_tx_lpi(&phydev->eee_cfg);
+		if (phydev->link) {
+			phydev->link = false;
+			phy_link_down(phydev);
+			phydev->link = true;
+			phy_link_up(phydev);
+		}
+	}
+}
+
+/**
  * phy_ethtool_set_eee - set EEE supported and status
  * @phydev: target phy_device struct
- * @data: ethtool_eee data
+ * @data: ethtool_keee data
  *
  * Description: it is to program the Advertisement EEE register.
  */
-int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data)
 {
 	int ret;
 
@@ -1668,9 +1706,14 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 
 	mutex_lock(&phydev->lock);
 	ret = genphy_c45_ethtool_set_eee(phydev, data);
+	if (ret >= 0) {
+		if (ret == 0)
+			phy_ethtool_set_eee_noneg(phydev, data);
+		eee_to_eeecfg(&phydev->eee_cfg, data);
+	}
 	mutex_unlock(&phydev->lock);
 
-	return ret;
+	return ret < 0 ? ret : 0;
 }
 EXPORT_SYMBOL(phy_ethtool_set_eee);
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8efa2a136f..6c6ec94757 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -148,6 +148,14 @@ static const int phy_eee_cap1_features_array[] = {
 __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init;
 EXPORT_SYMBOL_GPL(phy_eee_cap1_features);
 
+static const int phy_eee_cap2_features_array[] = {
+	ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+};
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_eee_cap2_features);
+
 static void features_init(void)
 {
 	/* 10/100 half/full*/
@@ -232,6 +240,9 @@ static void features_init(void)
 	linkmode_set_bit_array(phy_eee_cap1_features_array,
 			       ARRAY_SIZE(phy_eee_cap1_features_array),
 			       phy_eee_cap1_features);
+	linkmode_set_bit_array(phy_eee_cap2_features_array,
+			       ARRAY_SIZE(phy_eee_cap2_features_array),
+			       phy_eee_cap2_features);
 
 }
 
@@ -780,7 +791,7 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
  * and identifiers in @c45_ids.
  *
  * Returns zero on success, %-EIO on bus access error, or %-ENODEV if
- * the "devices in package" is invalid.
+ * the "devices in package" is invalid or no device responds.
  */
 static int get_phy_c45_ids(struct mii_bus *bus, int addr,
 			   struct phy_c45_device_ids *c45_ids)
@@ -803,7 +814,11 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr,
 			 */
 			ret = phy_c45_probe_present(bus, addr, i);
 			if (ret < 0)
-				return -EIO;
+				/* returning -ENODEV doesn't stop bus
+				 * scanning
+				 */
+				return (phy_reg == -EIO ||
+					phy_reg == -ENODEV) ? -ENODEV : -EIO;
 
 			if (!ret)
 				continue;
@@ -1413,7 +1428,7 @@ int phy_sfp_probe(struct phy_device *phydev,
 }
 EXPORT_SYMBOL(phy_sfp_probe);
 
-static bool phy_drv_supports_irq(struct phy_driver *phydrv)
+static bool phy_drv_supports_irq(const struct phy_driver *phydrv)
 {
 	return phydrv->config_intr && phydrv->handle_interrupt;
 }
@@ -1600,7 +1615,6 @@ EXPORT_SYMBOL(phy_attach_direct);
 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 			      phy_interface_t interface)
 {
-	struct bus_type *bus = &mdio_bus_type;
 	struct phy_device *phydev;
 	struct device *d;
 	int rc;
@@ -1611,7 +1625,7 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 	/* Search the list of PHY devices on the mdio bus for the
 	 * PHY with the requested name
 	 */
-	d = bus_find_device_by_name(bus, NULL, bus_id);
+	d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
 	if (!d) {
 		pr_err("PHY %s not found\n", bus_id);
 		return ERR_PTR(-ENODEV);
@@ -1708,6 +1722,7 @@ int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size)
 			shared->priv_size = priv_size;
 		}
 		shared->base_addr = base_addr;
+		shared->np = NULL;
 		refcount_set(&shared->refcnt, 1);
 		bus->shared[base_addr] = shared;
 	} else {
@@ -1731,6 +1746,63 @@ err_unlock:
 EXPORT_SYMBOL_GPL(phy_package_join);
 
 /**
+ * of_phy_package_join - join a common PHY group in PHY package
+ * @phydev: target phy_device struct
+ * @priv_size: if non-zero allocate this amount of bytes for private data
+ *
+ * This is a variant of phy_package_join for PHY package defined in DT.
+ *
+ * The parent node of the @phydev is checked as a valid PHY package node
+ * structure (by matching the node name "ethernet-phy-package") and the
+ * base_addr for the PHY package is passed to phy_package_join.
+ *
+ * With this configuration the shared struct will also have the np value
+ * filled to use additional DT defined properties in PHY specific
+ * probe_once and config_init_once PHY package OPs.
+ *
+ * Returns < 0 on error, 0 on success. Esp. calling phy_package_join()
+ * with the same cookie but a different priv_size is an error. Or a parent
+ * node is not detected or is not valid or doesn't match the expected node
+ * name for PHY package.
+ */
+int of_phy_package_join(struct phy_device *phydev, size_t priv_size)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct device_node *package_node;
+	u32 base_addr;
+	int ret;
+
+	if (!node)
+		return -EINVAL;
+
+	package_node = of_get_parent(node);
+	if (!package_node)
+		return -EINVAL;
+
+	if (!of_node_name_eq(package_node, "ethernet-phy-package")) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if (of_property_read_u32(package_node, "reg", &base_addr)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = phy_package_join(phydev, base_addr, priv_size);
+	if (ret)
+		goto exit;
+
+	phydev->shared->np = package_node;
+
+	return 0;
+exit:
+	of_node_put(package_node);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(of_phy_package_join);
+
+/**
  * phy_package_leave - leave a common PHY group
  * @phydev: target phy_device struct
  *
@@ -1746,6 +1818,10 @@ void phy_package_leave(struct phy_device *phydev)
 	if (!shared)
 		return;
 
+	/* Decrease the node refcount on leave if present */
+	if (shared->np)
+		of_node_put(shared->np);
+
 	if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) {
 		bus->shared[shared->base_addr] = NULL;
 		mutex_unlock(&bus->shared_lock);
@@ -1799,6 +1875,40 @@ int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
 EXPORT_SYMBOL_GPL(devm_phy_package_join);
 
 /**
+ * devm_of_phy_package_join - resource managed of_phy_package_join()
+ * @dev: device that is registering this PHY package
+ * @phydev: target phy_device struct
+ * @priv_size: if non-zero allocate this amount of bytes for private data
+ *
+ * Managed of_phy_package_join(). Shared storage fetched by this function,
+ * phy_package_leave() is automatically called on driver detach. See
+ * of_phy_package_join() for more information.
+ */
+int devm_of_phy_package_join(struct device *dev, struct phy_device *phydev,
+			     size_t priv_size)
+{
+	struct phy_device **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_phy_package_leave, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = of_phy_package_join(phydev, priv_size);
+
+	if (!ret) {
+		*ptr = phydev;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_of_phy_package_join);
+
+/**
  * phy_detach - detach a PHY device from its network device
  * @phydev: target phy_device struct
  *
@@ -1867,7 +1977,7 @@ int phy_suspend(struct phy_device *phydev)
 {
 	struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
 	struct net_device *netdev = phydev->attached_dev;
-	struct phy_driver *phydrv = phydev->drv;
+	const struct phy_driver *phydrv = phydev->drv;
 	int ret;
 
 	if (phydev->suspended)
@@ -1892,7 +2002,7 @@ EXPORT_SYMBOL(phy_suspend);
 
 int __phy_resume(struct phy_device *phydev)
 {
-	struct phy_driver *phydrv = phydev->drv;
+	const struct phy_driver *phydrv = phydev->drv;
 	int ret;
 
 	lockdep_assert_held(&phydev->lock);
@@ -2521,12 +2631,15 @@ EXPORT_SYMBOL(genphy_read_status);
 /**
  * genphy_c37_read_status - check the link status and update current link state
  * @phydev: target phy_device struct
+ * @changed: pointer where to store if link changed
  *
  * Description: Check the link, then figure out the current state
  *   by comparing what we advertise with what the link partner
  *   advertises. This function is for Clause 37 1000Base-X mode.
+ *
+ *   If link has changed, @changed is set to true, false otherwise.
  */
-int genphy_c37_read_status(struct phy_device *phydev)
+int genphy_c37_read_status(struct phy_device *phydev, bool *changed)
 {
 	int lpa, err, old_link = phydev->link;
 
@@ -2536,9 +2649,13 @@ int genphy_c37_read_status(struct phy_device *phydev)
 		return err;
 
 	/* why bother the PHY if nothing can have changed */
-	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) {
+		*changed = false;
 		return 0;
+	}
 
+	/* Signal link has changed */
+	*changed = true;
 	phydev->duplex = DUPLEX_UNKNOWN;
 	phydev->pause = 0;
 	phydev->asym_pause = 0;
@@ -2778,6 +2895,50 @@ void phy_advertise_supported(struct phy_device *phydev)
 EXPORT_SYMBOL(phy_advertise_supported);
 
 /**
+ * phy_advertise_eee_all - Advertise all supported EEE modes
+ * @phydev: target phy_device struct
+ *
+ * Description: Per default phylib preserves the EEE advertising at the time of
+ * phy probing, which might be a subset of the supported EEE modes. Use this
+ * function when all supported EEE modes should be advertised. This does not
+ * trigger auto-negotiation, so must be called before phy_start()/
+ * phylink_start() which will start auto-negotiation.
+ */
+void phy_advertise_eee_all(struct phy_device *phydev)
+{
+	linkmode_copy(phydev->advertising_eee, phydev->supported_eee);
+}
+EXPORT_SYMBOL_GPL(phy_advertise_eee_all);
+
+/**
+ * phy_support_eee - Set initial EEE policy configuration
+ * @phydev: Target phy_device struct
+ *
+ * This function configures the initial policy for Energy Efficient Ethernet
+ * (EEE) on the specified PHY device, influencing that EEE capabilities are
+ * advertised before the link is established. It should be called during PHY
+ * registration by the MAC driver and/or the PHY driver (for SmartEEE PHYs)
+ * if MAC supports LPI or PHY is capable to compensate missing LPI functionality
+ * of the MAC.
+ *
+ * The function sets default EEE policy parameters, including preparing the PHY
+ * to advertise EEE capabilities based on hardware support.
+ *
+ * It also sets the expected configuration for Low Power Idle (LPI) in the MAC
+ * driver. If the PHY framework determines that both local and remote
+ * advertisements support EEE, and the negotiated link mode is compatible with
+ * EEE, it will set enable_tx_lpi = true. The MAC driver is expected to act on
+ * this setting by enabling the LPI timer if enable_tx_lpi is set.
+ */
+void phy_support_eee(struct phy_device *phydev)
+{
+	linkmode_copy(phydev->advertising_eee, phydev->supported_eee);
+	phydev->eee_cfg.tx_lpi_enabled = true;
+	phydev->eee_cfg.eee_enabled = true;
+}
+EXPORT_SYMBOL(phy_support_eee);
+
+/**
  * phy_support_sym_pause - Enable support of symmetrical pause
  * @phydev: target phy_device struct
  *
@@ -3100,6 +3261,7 @@ static int of_phy_led(struct phy_device *phydev,
 	struct device *dev = &phydev->mdio.dev;
 	struct led_init_data init_data = {};
 	struct led_classdev *cdev;
+	unsigned long modes = 0;
 	struct phy_led *phyled;
 	u32 index;
 	int err;
@@ -3117,6 +3279,21 @@ static int of_phy_led(struct phy_device *phydev,
 	if (index > U8_MAX)
 		return -EINVAL;
 
+	if (of_property_read_bool(led, "active-low"))
+		set_bit(PHY_LED_ACTIVE_LOW, &modes);
+	if (of_property_read_bool(led, "inactive-high-impedance"))
+		set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes);
+
+	if (modes) {
+		/* Return error if asked to set polarity modes but not supported */
+		if (!phydev->drv->led_polarity_set)
+			return -EINVAL;
+
+		err = phydev->drv->led_polarity_set(phydev, index, modes);
+		if (err)
+			return err;
+	}
+
 	phyled->index = index;
 	if (phydev->drv->led_brightness_set)
 		cdev->brightness_set_blocking = phy_led_set_brightness;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ed0b4ccaa6..503fd7c405 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2764,9 +2764,9 @@ EXPORT_SYMBOL_GPL(phylink_init_eee);
 /**
  * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters
  * @pl: a pointer to a &struct phylink returned from phylink_create()
- * @eee: a pointer to a &struct ethtool_eee for the read parameters
+ * @eee: a pointer to a &struct ethtool_keee for the read parameters
  */
-int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
+int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_keee *eee)
 {
 	int ret = -EOPNOTSUPP;
 
@@ -2782,9 +2782,9 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
 /**
  * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters
  * @pl: a pointer to a &struct phylink returned from phylink_create()
- * @eee: a pointer to a &struct ethtool_eee for the desired parameters
+ * @eee: a pointer to a &struct ethtool_keee for the desired parameters
  */
-int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
+int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_keee *eee)
 {
 	int ret = -EOPNOTSUPP;
 
diff --git a/drivers/net/phy/qcom/Kconfig b/drivers/net/phy/qcom/Kconfig
new file mode 100644
index 0000000000..570626cc8e
--- /dev/null
+++ b/drivers/net/phy/qcom/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config QCOM_NET_PHYLIB
+	tristate
+
+config AT803X_PHY
+	tristate "Qualcomm Atheros AR803X PHYs"
+	select QCOM_NET_PHYLIB
+	depends on REGULATOR
+	help
+	  Currently supports the AR8030, AR8031, AR8033, AR8035 model
+
+config QCA83XX_PHY
+	tristate "Qualcomm Atheros QCA833x PHYs"
+	select QCOM_NET_PHYLIB
+	help
+	  Currently supports the internal QCA8337(Internal qca8k PHY) model
+
+config QCA808X_PHY
+	tristate "Qualcomm QCA808x PHYs"
+	select QCOM_NET_PHYLIB
+	help
+	  Currently supports the QCA8081 model
+
+config QCA807X_PHY
+	tristate "Qualcomm QCA807x PHYs"
+	select QCOM_NET_PHYLIB
+	depends on OF_MDIO
+	help
+	  Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII
+	  control PHY.
diff --git a/drivers/net/phy/qcom/Makefile b/drivers/net/phy/qcom/Makefile
new file mode 100644
index 0000000000..f24fb550ba
--- /dev/null
+++ b/drivers/net/phy/qcom/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_QCOM_NET_PHYLIB)	+= qcom-phy-lib.o
+obj-$(CONFIG_AT803X_PHY)	+= at803x.o
+obj-$(CONFIG_QCA83XX_PHY)	+= qca83xx.o
+obj-$(CONFIG_QCA808X_PHY)	+= qca808x.o
+obj-$(CONFIG_QCA807X_PHY)	+= qca807x.o
diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c
new file mode 100644
index 0000000000..e79657f76b
--- /dev/null
+++ b/drivers/net/phy/qcom/at803x.c
@@ -0,0 +1,1108 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/net/phy/at803x.c
+ *
+ * Driver for Qualcomm Atheros AR803x PHY
+ *
+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
+ */
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool_netlink.h>
+#include <linux/bitfield.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/phylink.h>
+#include <linux/sfp.h>
+#include <dt-bindings/net/qca-ar803x.h>
+
+#include "qcom.h"
+
+#define AT803X_LED_CONTROL			0x18
+
+#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
+#define AT803X_WOL_EN				BIT(5)
+
+#define AT803X_REG_CHIP_CONFIG			0x1f
+#define AT803X_BT_BX_REG_SEL			0x8000
+
+#define AT803X_MODE_CFG_MASK			0x0F
+#define AT803X_MODE_CFG_BASET_RGMII		0x00
+#define AT803X_MODE_CFG_BASET_SGMII		0x01
+#define AT803X_MODE_CFG_BX1000_RGMII_50OHM	0x02
+#define AT803X_MODE_CFG_BX1000_RGMII_75OHM	0x03
+#define AT803X_MODE_CFG_BX1000_CONV_50OHM	0x04
+#define AT803X_MODE_CFG_BX1000_CONV_75OHM	0x05
+#define AT803X_MODE_CFG_FX100_RGMII_50OHM	0x06
+#define AT803X_MODE_CFG_FX100_CONV_50OHM	0x07
+#define AT803X_MODE_CFG_RGMII_AUTO_MDET		0x0B
+#define AT803X_MODE_CFG_FX100_RGMII_75OHM	0x0E
+#define AT803X_MODE_CFG_FX100_CONV_75OHM	0x0F
+
+#define AT803X_PSSR				0x11	/*PHY-Specific Status Register*/
+#define AT803X_PSSR_MR_AN_COMPLETE		0x0200
+
+#define AT803X_DEBUG_REG_1F			0x1F
+#define AT803X_DEBUG_PLL_ON			BIT(2)
+#define AT803X_DEBUG_RGMII_1V8			BIT(3)
+
+/* AT803x supports either the XTAL input pad, an internal PLL or the
+ * DSP as clock reference for the clock output pad. The XTAL reference
+ * is only used for 25 MHz output, all other frequencies need the PLL.
+ * The DSP as a clock reference is used in synchronous ethernet
+ * applications.
+ *
+ * By default the PLL is only enabled if there is a link. Otherwise
+ * the PHY will go into low power state and disabled the PLL. You can
+ * set the PLL_ON bit (see debug register 0x1f) to keep the PLL always
+ * enabled.
+ */
+#define AT803X_MMD7_CLK25M			0x8016
+#define AT803X_CLK_OUT_MASK			GENMASK(4, 2)
+#define AT803X_CLK_OUT_25MHZ_XTAL		0
+#define AT803X_CLK_OUT_25MHZ_DSP		1
+#define AT803X_CLK_OUT_50MHZ_PLL		2
+#define AT803X_CLK_OUT_50MHZ_DSP		3
+#define AT803X_CLK_OUT_62_5MHZ_PLL		4
+#define AT803X_CLK_OUT_62_5MHZ_DSP		5
+#define AT803X_CLK_OUT_125MHZ_PLL		6
+#define AT803X_CLK_OUT_125MHZ_DSP		7
+
+/* The AR8035 has another mask which is compatible with the AR8031/AR8033 mask
+ * but doesn't support choosing between XTAL/PLL and DSP.
+ */
+#define AT8035_CLK_OUT_MASK			GENMASK(4, 3)
+
+#define AT803X_CLK_OUT_STRENGTH_MASK		GENMASK(8, 7)
+#define AT803X_CLK_OUT_STRENGTH_FULL		0
+#define AT803X_CLK_OUT_STRENGTH_HALF		1
+#define AT803X_CLK_OUT_STRENGTH_QUARTER		2
+
+#define AT803X_MMD3_SMARTEEE_CTL1		0x805b
+#define AT803X_MMD3_SMARTEEE_CTL2		0x805c
+#define AT803X_MMD3_SMARTEEE_CTL3		0x805d
+#define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN	BIT(8)
+
+#define ATH9331_PHY_ID				0x004dd041
+#define ATH8030_PHY_ID				0x004dd076
+#define ATH8031_PHY_ID				0x004dd074
+#define ATH8032_PHY_ID				0x004dd023
+#define ATH8035_PHY_ID				0x004dd072
+#define AT8030_PHY_ID_MASK			0xffffffef
+
+#define QCA9561_PHY_ID				0x004dd042
+
+#define AT803X_PAGE_FIBER			0
+#define AT803X_PAGE_COPPER			1
+
+/* don't turn off internal PLL */
+#define AT803X_KEEP_PLL_ENABLED			BIT(0)
+#define AT803X_DISABLE_SMARTEEE			BIT(1)
+
+/* disable hibernation mode */
+#define AT803X_DISABLE_HIBERNATION_MODE		BIT(2)
+
+MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+struct at803x_priv {
+	int flags;
+	u16 clk_25m_reg;
+	u16 clk_25m_mask;
+	u8 smarteee_lpi_tw_1g;
+	u8 smarteee_lpi_tw_100m;
+	bool is_fiber;
+	bool is_1000basex;
+	struct regulator_dev *vddio_rdev;
+	struct regulator_dev *vddh_rdev;
+};
+
+struct at803x_context {
+	u16 bmcr;
+	u16 advertise;
+	u16 control1000;
+	u16 int_enable;
+	u16 smart_speed;
+	u16 led_control;
+};
+
+static int at803x_write_page(struct phy_device *phydev, int page)
+{
+	int mask;
+	int set;
+
+	if (page == AT803X_PAGE_COPPER) {
+		set = AT803X_BT_BX_REG_SEL;
+		mask = 0;
+	} else {
+		set = 0;
+		mask = AT803X_BT_BX_REG_SEL;
+	}
+
+	return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set);
+}
+
+static int at803x_read_page(struct phy_device *phydev)
+{
+	int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+
+	if (ccr < 0)
+		return ccr;
+
+	if (ccr & AT803X_BT_BX_REG_SEL)
+		return AT803X_PAGE_COPPER;
+
+	return AT803X_PAGE_FIBER;
+}
+
+static int at803x_enable_rx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0,
+				     AT803X_DEBUG_RX_CLK_DLY_EN);
+}
+
+static int at803x_enable_tx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0,
+				     AT803X_DEBUG_TX_CLK_DLY_EN);
+}
+
+static int at803x_disable_rx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
+				     AT803X_DEBUG_RX_CLK_DLY_EN, 0);
+}
+
+static int at803x_disable_tx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE,
+				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
+}
+
+/* save relevant PHY registers to private copy */
+static void at803x_context_save(struct phy_device *phydev,
+				struct at803x_context *context)
+{
+	context->bmcr = phy_read(phydev, MII_BMCR);
+	context->advertise = phy_read(phydev, MII_ADVERTISE);
+	context->control1000 = phy_read(phydev, MII_CTRL1000);
+	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
+	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
+	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
+}
+
+/* restore relevant PHY registers from private copy */
+static void at803x_context_restore(struct phy_device *phydev,
+				   const struct at803x_context *context)
+{
+	phy_write(phydev, MII_BMCR, context->bmcr);
+	phy_write(phydev, MII_ADVERTISE, context->advertise);
+	phy_write(phydev, MII_CTRL1000, context->control1000);
+	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
+	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
+	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
+}
+
+static int at803x_suspend(struct phy_device *phydev)
+{
+	int value;
+	int wol_enabled;
+
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+	wol_enabled = value & AT803X_INTR_ENABLE_WOL;
+
+	if (wol_enabled)
+		value = BMCR_ISOLATE;
+	else
+		value = BMCR_PDOWN;
+
+	phy_modify(phydev, MII_BMCR, 0, value);
+
+	return 0;
+}
+
+static int at803x_resume(struct phy_device *phydev)
+{
+	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
+}
+
+static int at803x_parse_dt(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct at803x_priv *priv = phydev->priv;
+	u32 freq, strength, tw;
+	unsigned int sel;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return 0;
+
+	if (of_property_read_bool(node, "qca,disable-smarteee"))
+		priv->flags |= AT803X_DISABLE_SMARTEEE;
+
+	if (of_property_read_bool(node, "qca,disable-hibernation-mode"))
+		priv->flags |= AT803X_DISABLE_HIBERNATION_MODE;
+
+	if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) {
+		if (!tw || tw > 255) {
+			phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n");
+			return -EINVAL;
+		}
+		priv->smarteee_lpi_tw_1g = tw;
+	}
+
+	if (!of_property_read_u32(node, "qca,smarteee-tw-us-100m", &tw)) {
+		if (!tw || tw > 255) {
+			phydev_err(phydev, "invalid qca,smarteee-tw-us-100m\n");
+			return -EINVAL;
+		}
+		priv->smarteee_lpi_tw_100m = tw;
+	}
+
+	ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq);
+	if (!ret) {
+		switch (freq) {
+		case 25000000:
+			sel = AT803X_CLK_OUT_25MHZ_XTAL;
+			break;
+		case 50000000:
+			sel = AT803X_CLK_OUT_50MHZ_PLL;
+			break;
+		case 62500000:
+			sel = AT803X_CLK_OUT_62_5MHZ_PLL;
+			break;
+		case 125000000:
+			sel = AT803X_CLK_OUT_125MHZ_PLL;
+			break;
+		default:
+			phydev_err(phydev, "invalid qca,clk-out-frequency\n");
+			return -EINVAL;
+		}
+
+		priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel);
+		priv->clk_25m_mask |= AT803X_CLK_OUT_MASK;
+	}
+
+	ret = of_property_read_u32(node, "qca,clk-out-strength", &strength);
+	if (!ret) {
+		priv->clk_25m_mask |= AT803X_CLK_OUT_STRENGTH_MASK;
+		switch (strength) {
+		case AR803X_STRENGTH_FULL:
+			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_FULL;
+			break;
+		case AR803X_STRENGTH_HALF:
+			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_HALF;
+			break;
+		case AR803X_STRENGTH_QUARTER:
+			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_QUARTER;
+			break;
+		default:
+			phydev_err(phydev, "invalid qca,clk-out-strength\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int at803x_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct at803x_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	ret = at803x_parse_dt(phydev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int at803x_get_features(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	int err;
+
+	err = genphy_read_abilities(phydev);
+	if (err)
+		return err;
+
+	if (phydev->drv->phy_id != ATH8031_PHY_ID)
+		return 0;
+
+	/* AR8031/AR8033 have different status registers
+	 * for copper and fiber operation. However, the
+	 * extended status register is the same for both
+	 * operation modes.
+	 *
+	 * As a result of that, ESTATUS_1000_XFULL is set
+	 * to 1 even when operating in copper TP mode.
+	 *
+	 * Remove this mode from the supported link modes
+	 * when not operating in 1000BaseX mode.
+	 */
+	if (!priv->is_1000basex)
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+				   phydev->supported);
+
+	return 0;
+}
+
+static int at803x_smarteee_config(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	u16 mask = 0, val = 0;
+	int ret;
+
+	if (priv->flags & AT803X_DISABLE_SMARTEEE)
+		return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+				      AT803X_MMD3_SMARTEEE_CTL3,
+				      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, 0);
+
+	if (priv->smarteee_lpi_tw_1g) {
+		mask |= 0xff00;
+		val |= priv->smarteee_lpi_tw_1g << 8;
+	}
+	if (priv->smarteee_lpi_tw_100m) {
+		mask |= 0x00ff;
+		val |= priv->smarteee_lpi_tw_100m;
+	}
+	if (!mask)
+		return 0;
+
+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL1,
+			     mask, val);
+	if (ret)
+		return ret;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL3,
+			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN,
+			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN);
+}
+
+static int at803x_clk_out_config(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	if (!priv->clk_25m_mask)
+		return 0;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M,
+			      priv->clk_25m_mask, priv->clk_25m_reg);
+}
+
+static int at8031_pll_config(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	/* The default after hardware reset is PLL OFF. After a soft reset, the
+	 * values are retained.
+	 */
+	if (priv->flags & AT803X_KEEP_PLL_ENABLED)
+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
+					     0, AT803X_DEBUG_PLL_ON);
+	else
+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
+					     AT803X_DEBUG_PLL_ON, 0);
+}
+
+static int at803x_hibernation_mode_config(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	/* The default after hardware reset is hibernation mode enabled. After
+	 * software reset, the value is retained.
+	 */
+	if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE))
+		return 0;
+
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
+					 AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0);
+}
+
+static int at803x_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	/* The RX and TX delay default is:
+	 *   after HW reset: RX delay enabled and TX delay disabled
+	 *   after SW reset: RX delay enabled, while TX delay retains the
+	 *   value before reset.
+	 */
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+		ret = at803x_enable_rx_delay(phydev);
+	else
+		ret = at803x_disable_rx_delay(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+		ret = at803x_enable_tx_delay(phydev);
+	else
+		ret = at803x_disable_tx_delay(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = at803x_smarteee_config(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = at803x_clk_out_config(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = at803x_hibernation_mode_config(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* Ar803x extended next page bit is enabled by default. Cisco
+	 * multigig switches read this bit and attempt to negotiate 10Gbps
+	 * rates even if the next page bit is disabled. This is incorrect
+	 * behaviour but we still need to accommodate it. XNP is only needed
+	 * for 10Gbps support, so disable XNP.
+	 */
+	return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0);
+}
+
+static void at803x_link_change_notify(struct phy_device *phydev)
+{
+	/*
+	 * Conduct a hardware reset for AT8030 every time a link loss is
+	 * signalled. This is necessary to circumvent a hardware bug that
+	 * occurs when the cable is unplugged while TX packets are pending
+	 * in the FIFO. In such cases, the FIFO enters an error mode it
+	 * cannot recover from by software.
+	 */
+	if (phydev->state == PHY_NOLINK && phydev->mdio.reset_gpio) {
+		struct at803x_context context;
+
+		at803x_context_save(phydev, &context);
+
+		phy_device_reset(phydev, 1);
+		usleep_range(1000, 2000);
+		phy_device_reset(phydev, 0);
+		usleep_range(1000, 2000);
+
+		at803x_context_restore(phydev, &context);
+
+		phydev_dbg(phydev, "%s(): phy was reset\n", __func__);
+	}
+}
+
+static int at803x_config_aneg(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	int ret;
+
+	ret = at803x_prepare_config_aneg(phydev);
+	if (ret)
+		return ret;
+
+	if (priv->is_1000basex)
+		return genphy_c37_config_aneg(phydev);
+
+	return genphy_config_aneg(phydev);
+}
+
+static int at803x_cable_test_result_trans(u16 status)
+{
+	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
+	case AT803X_CDT_STATUS_STAT_NORMAL:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case AT803X_CDT_STATUS_STAT_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case AT803X_CDT_STATUS_STAT_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case AT803X_CDT_STATUS_STAT_FAIL:
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static bool at803x_cdt_test_failed(u16 status)
+{
+	return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) ==
+		AT803X_CDT_STATUS_STAT_FAIL;
+}
+
+static bool at803x_cdt_fault_length_valid(u16 status)
+{
+	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
+	case AT803X_CDT_STATUS_STAT_OPEN:
+	case AT803X_CDT_STATUS_STAT_SHORT:
+		return true;
+	}
+	return false;
+}
+
+static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
+{
+	static const int ethtool_pair[] = {
+		ETHTOOL_A_CABLE_PAIR_A,
+		ETHTOOL_A_CABLE_PAIR_B,
+		ETHTOOL_A_CABLE_PAIR_C,
+		ETHTOOL_A_CABLE_PAIR_D,
+	};
+	int ret, val;
+
+	val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
+	      AT803X_CDT_ENABLE_TEST;
+	ret = at803x_cdt_start(phydev, val);
+	if (ret)
+		return ret;
+
+	ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST);
+	if (ret)
+		return ret;
+
+	val = phy_read(phydev, AT803X_CDT_STATUS);
+	if (val < 0)
+		return val;
+
+	if (at803x_cdt_test_failed(val))
+		return 0;
+
+	ethnl_cable_test_result(phydev, ethtool_pair[pair],
+				at803x_cable_test_result_trans(val));
+
+	if (at803x_cdt_fault_length_valid(val)) {
+		val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val);
+		ethnl_cable_test_fault_length(phydev, ethtool_pair[pair],
+					      at803x_cdt_fault_length(val));
+	}
+
+	return 1;
+}
+
+static int at803x_cable_test_get_status(struct phy_device *phydev,
+					bool *finished, unsigned long pair_mask)
+{
+	int retries = 20;
+	int pair, ret;
+
+	*finished = false;
+
+	/* According to the datasheet the CDT can be performed when
+	 * there is no link partner or when the link partner is
+	 * auto-negotiating. Starting the test will restart the AN
+	 * automatically. It seems that doing this repeatedly we will
+	 * get a slot where our link partner won't disturb our
+	 * measurement.
+	 */
+	while (pair_mask && retries--) {
+		for_each_set_bit(pair, &pair_mask, 4) {
+			ret = at803x_cable_test_one_pair(phydev, pair);
+			if (ret < 0)
+				return ret;
+			if (ret)
+				clear_bit(pair, &pair_mask);
+		}
+		if (pair_mask)
+			msleep(250);
+	}
+
+	*finished = true;
+
+	return 0;
+}
+
+static void at803x_cable_test_autoneg(struct phy_device *phydev)
+{
+	/* Enable auto-negotiation, but advertise no capabilities, no link
+	 * will be established. A restart of the auto-negotiation is not
+	 * required, because the cable test will automatically break the link.
+	 */
+	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
+	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
+}
+
+static int at803x_cable_test_start(struct phy_device *phydev)
+{
+	at803x_cable_test_autoneg(phydev);
+	/* we do all the (time consuming) work later */
+	return 0;
+}
+
+static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
+					    unsigned int selector)
+{
+	struct phy_device *phydev = rdev_get_drvdata(rdev);
+
+	if (selector)
+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
+					     0, AT803X_DEBUG_RGMII_1V8);
+	else
+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
+					     AT803X_DEBUG_RGMII_1V8, 0);
+}
+
+static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct phy_device *phydev = rdev_get_drvdata(rdev);
+	int val;
+
+	val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F);
+	if (val < 0)
+		return val;
+
+	return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0;
+}
+
+static const struct regulator_ops vddio_regulator_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.set_voltage_sel = at8031_rgmii_reg_set_voltage_sel,
+	.get_voltage_sel = at8031_rgmii_reg_get_voltage_sel,
+};
+
+static const unsigned int vddio_voltage_table[] = {
+	1500000,
+	1800000,
+};
+
+static const struct regulator_desc vddio_desc = {
+	.name = "vddio",
+	.of_match = of_match_ptr("vddio-regulator"),
+	.n_voltages = ARRAY_SIZE(vddio_voltage_table),
+	.volt_table = vddio_voltage_table,
+	.ops = &vddio_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+};
+
+static const struct regulator_ops vddh_regulator_ops = {
+};
+
+static const struct regulator_desc vddh_desc = {
+	.name = "vddh",
+	.of_match = of_match_ptr("vddh-regulator"),
+	.n_voltages = 1,
+	.fixed_uV = 2500000,
+	.ops = &vddh_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+};
+
+static int at8031_register_regulators(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	struct device *dev = &phydev->mdio.dev;
+	struct regulator_config config = { };
+
+	config.dev = dev;
+	config.driver_data = phydev;
+
+	priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config);
+	if (IS_ERR(priv->vddio_rdev)) {
+		phydev_err(phydev, "failed to register VDDIO regulator\n");
+		return PTR_ERR(priv->vddio_rdev);
+	}
+
+	priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config);
+	if (IS_ERR(priv->vddh_rdev)) {
+		phydev_err(phydev, "failed to register VDDH regulator\n");
+		return PTR_ERR(priv->vddh_rdev);
+	}
+
+	return 0;
+}
+
+static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+	struct phy_device *phydev = upstream;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
+	phy_interface_t iface;
+
+	linkmode_zero(phy_support);
+	phylink_set(phy_support, 1000baseX_Full);
+	phylink_set(phy_support, 1000baseT_Full);
+	phylink_set(phy_support, Autoneg);
+	phylink_set(phy_support, Pause);
+	phylink_set(phy_support, Asym_Pause);
+
+	linkmode_zero(sfp_support);
+	sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
+	/* Some modules support 10G modes as well as others we support.
+	 * Mask out non-supported modes so the correct interface is picked.
+	 */
+	linkmode_and(sfp_support, phy_support, sfp_support);
+
+	if (linkmode_empty(sfp_support)) {
+		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
+		return -EINVAL;
+	}
+
+	iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
+
+	/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
+	 * interface for use with SFP modules.
+	 * However, some copper modules detected as having a preferred SGMII
+	 * interface do default to and function in 1000Base-X mode, so just
+	 * print a warning and allow such modules, as they may have some chance
+	 * of working.
+	 */
+	if (iface == PHY_INTERFACE_MODE_SGMII)
+		dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
+	else if (iface != PHY_INTERFACE_MODE_1000BASEX)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct sfp_upstream_ops at8031_sfp_ops = {
+	.attach = phy_sfp_attach,
+	.detach = phy_sfp_detach,
+	.module_insert = at8031_sfp_insert,
+};
+
+static int at8031_parse_dt(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct at803x_priv *priv = phydev->priv;
+	int ret;
+
+	if (of_property_read_bool(node, "qca,keep-pll-enabled"))
+		priv->flags |= AT803X_KEEP_PLL_ENABLED;
+
+	ret = at8031_register_regulators(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
+						 "vddio");
+	if (ret) {
+		phydev_err(phydev, "failed to get VDDIO regulator\n");
+		return ret;
+	}
+
+	/* Only AR8031/8033 support 1000Base-X for SFP modules */
+	return phy_sfp_probe(phydev, &at8031_sfp_ops);
+}
+
+static int at8031_probe(struct phy_device *phydev)
+{
+	struct at803x_priv *priv;
+	int mode_cfg;
+	int ccr;
+	int ret;
+
+	ret = at803x_probe(phydev);
+	if (ret)
+		return ret;
+
+	priv = phydev->priv;
+
+	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
+	 * options.
+	 */
+	ret = at8031_parse_dt(phydev);
+	if (ret)
+		return ret;
+
+	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+	if (ccr < 0)
+		return ccr;
+	mode_cfg = ccr & AT803X_MODE_CFG_MASK;
+
+	switch (mode_cfg) {
+	case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
+	case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
+		priv->is_1000basex = true;
+		fallthrough;
+	case AT803X_MODE_CFG_FX100_RGMII_50OHM:
+	case AT803X_MODE_CFG_FX100_RGMII_75OHM:
+		priv->is_fiber = true;
+		break;
+	}
+
+	/* Disable WoL in 1588 register which is enabled
+	 * by default
+	 */
+	return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+			      AT803X_PHY_MMD3_WOL_CTRL,
+			      AT803X_WOL_EN, 0);
+}
+
+static int at8031_config_init(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	int ret;
+
+	/* Some bootloaders leave the fiber page selected.
+	 * Switch to the appropriate page (fiber or copper), as otherwise we
+	 * read the PHY capabilities from the wrong page.
+	 */
+	phy_lock_mdio_bus(phydev);
+	ret = at803x_write_page(phydev,
+				priv->is_fiber ? AT803X_PAGE_FIBER :
+						 AT803X_PAGE_COPPER);
+	phy_unlock_mdio_bus(phydev);
+	if (ret)
+		return ret;
+
+	ret = at8031_pll_config(phydev);
+	if (ret < 0)
+		return ret;
+
+	return at803x_config_init(phydev);
+}
+
+static int at8031_set_wol(struct phy_device *phydev,
+			  struct ethtool_wolinfo *wol)
+{
+	int ret;
+
+	/* First setup MAC address and enable WOL interrupt */
+	ret = at803x_set_wol(phydev, wol);
+	if (ret)
+		return ret;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		/* Enable WOL function for 1588 */
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+				     AT803X_PHY_MMD3_WOL_CTRL,
+				     0, AT803X_WOL_EN);
+	else
+		/* Disable WoL function for 1588 */
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+				     AT803X_PHY_MMD3_WOL_CTRL,
+				     AT803X_WOL_EN, 0);
+
+	return ret;
+}
+
+static int at8031_config_intr(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	int err, value = 0;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED &&
+	    priv->is_fiber) {
+		/* Clear any pending interrupts */
+		err = at803x_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
+
+		err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value);
+		if (err)
+			return err;
+	}
+
+	return at803x_config_intr(phydev);
+}
+
+/* AR8031 and AR8033 share the same read status logic */
+static int at8031_read_status(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	bool changed;
+
+	if (priv->is_1000basex)
+		return genphy_c37_read_status(phydev, &changed);
+
+	return at803x_read_status(phydev);
+}
+
+/* AR8031 and AR8035 share the same cable test get status reg */
+static int at8031_cable_test_get_status(struct phy_device *phydev,
+					bool *finished)
+{
+	return at803x_cable_test_get_status(phydev, finished, 0xf);
+}
+
+/* AR8031 and AR8035 share the same cable test start logic */
+static int at8031_cable_test_start(struct phy_device *phydev)
+{
+	at803x_cable_test_autoneg(phydev);
+	phy_write(phydev, MII_CTRL1000, 0);
+	/* we do all the (time consuming) work later */
+	return 0;
+}
+
+/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */
+static int at8032_cable_test_get_status(struct phy_device *phydev,
+					bool *finished)
+{
+	return at803x_cable_test_get_status(phydev, finished, 0x3);
+}
+
+static int at8035_parse_dt(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	/* Mask is set by the generic at803x_parse_dt
+	 * if property is set. Assume property is set
+	 * with the mask not zero.
+	 */
+	if (priv->clk_25m_mask) {
+		/* Fixup for the AR8030/AR8035. This chip has another mask and
+		 * doesn't support the DSP reference. Eg. the lowest bit of the
+		 * mask. The upper two bits select the same frequencies. Mask
+		 * the lowest bit here.
+		 *
+		 * Warning:
+		 *   There was no datasheet for the AR8030 available so this is
+		 *   just a guess. But the AR8035 is listed as pin compatible
+		 *   to the AR8030 so there might be a good chance it works on
+		 *   the AR8030 too.
+		 */
+		priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
+		priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
+	}
+
+	return 0;
+}
+
+/* AR8030 and AR8035 shared the same special mask for clk_25m */
+static int at8035_probe(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = at803x_probe(phydev);
+	if (ret)
+		return ret;
+
+	return at8035_parse_dt(phydev);
+}
+
+static struct phy_driver at803x_driver[] = {
+{
+	/* Qualcomm Atheros AR8035 */
+	PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
+	.name			= "Qualcomm Atheros AR8035",
+	.flags			= PHY_POLL_CABLE_TEST,
+	.probe			= at8035_probe,
+	.config_aneg		= at803x_config_aneg,
+	.config_init		= at803x_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	/* PHY_GBIT_FEATURES */
+	.read_status		= at803x_read_status,
+	.config_intr		= at803x_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+	.get_tunable		= at803x_get_tunable,
+	.set_tunable		= at803x_set_tunable,
+	.cable_test_start	= at8031_cable_test_start,
+	.cable_test_get_status	= at8031_cable_test_get_status,
+}, {
+	/* Qualcomm Atheros AR8030 */
+	.phy_id			= ATH8030_PHY_ID,
+	.name			= "Qualcomm Atheros AR8030",
+	.phy_id_mask		= AT8030_PHY_ID_MASK,
+	.probe			= at8035_probe,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	/* PHY_BASIC_FEATURES */
+	.config_intr		= at803x_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+}, {
+	/* Qualcomm Atheros AR8031/AR8033 */
+	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
+	.name			= "Qualcomm Atheros AR8031/AR8033",
+	.flags			= PHY_POLL_CABLE_TEST,
+	.probe			= at8031_probe,
+	.config_init		= at8031_config_init,
+	.config_aneg		= at803x_config_aneg,
+	.soft_reset		= genphy_soft_reset,
+	.set_wol		= at8031_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.read_page		= at803x_read_page,
+	.write_page		= at803x_write_page,
+	.get_features		= at803x_get_features,
+	.read_status		= at8031_read_status,
+	.config_intr		= at8031_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+	.get_tunable		= at803x_get_tunable,
+	.set_tunable		= at803x_set_tunable,
+	.cable_test_start	= at8031_cable_test_start,
+	.cable_test_get_status	= at8031_cable_test_get_status,
+}, {
+	/* Qualcomm Atheros AR8032 */
+	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
+	.name			= "Qualcomm Atheros AR8032",
+	.probe			= at803x_probe,
+	.flags			= PHY_POLL_CABLE_TEST,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	/* PHY_BASIC_FEATURES */
+	.config_intr		= at803x_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+	.cable_test_start	= at803x_cable_test_start,
+	.cable_test_get_status	= at8032_cable_test_get_status,
+}, {
+	/* ATHEROS AR9331 */
+	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
+	.name			= "Qualcomm Atheros AR9331 built-in PHY",
+	.probe			= at803x_probe,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.flags			= PHY_POLL_CABLE_TEST,
+	/* PHY_BASIC_FEATURES */
+	.config_intr		= at803x_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+	.cable_test_start	= at803x_cable_test_start,
+	.cable_test_get_status	= at8032_cable_test_get_status,
+	.read_status		= at803x_read_status,
+	.soft_reset		= genphy_soft_reset,
+	.config_aneg		= at803x_config_aneg,
+}, {
+	/* Qualcomm Atheros QCA9561 */
+	PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
+	.name			= "Qualcomm Atheros QCA9561 built-in PHY",
+	.probe			= at803x_probe,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.flags			= PHY_POLL_CABLE_TEST,
+	/* PHY_BASIC_FEATURES */
+	.config_intr		= at803x_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+	.cable_test_start	= at803x_cable_test_start,
+	.cable_test_get_status	= at8032_cable_test_get_status,
+	.read_status		= at803x_read_status,
+	.soft_reset		= genphy_soft_reset,
+	.config_aneg		= at803x_config_aneg,
+}, };
+
+module_phy_driver(at803x_driver);
+
+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+	{ ATH8030_PHY_ID, AT8030_PHY_ID_MASK },
+	{ PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, atheros_tbl);
diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
new file mode 100644
index 0000000000..672c692911
--- /dev/null
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *         Christian Marangi <ansuelsmth@gmail.com>
+ *
+ * Qualcomm QCA8072 and QCA8075 PHY driver
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/bitfield.h>
+#include <linux/gpio/driver.h>
+#include <linux/sfp.h>
+
+#include "qcom.h"
+
+#define QCA807X_CHIP_CONFIGURATION				0x1f
+#define QCA807X_BT_BX_REG_SEL					BIT(15)
+#define QCA807X_BT_BX_REG_SEL_FIBER				0
+#define QCA807X_BT_BX_REG_SEL_COPPER				1
+#define QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK		GENMASK(3, 0)
+#define QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII		4
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER		3
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER	0
+
+#define QCA807X_MEDIA_SELECT_STATUS				0x1a
+#define QCA807X_MEDIA_DETECTED_COPPER				BIT(5)
+#define QCA807X_MEDIA_DETECTED_1000_BASE_X			BIT(4)
+#define QCA807X_MEDIA_DETECTED_100_BASE_FX			BIT(3)
+
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION			0x807e
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN		BIT(0)
+
+#define QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH	0x801a
+#define QCA807X_CONTROL_DAC_MASK				GENMASK(2, 0)
+/* List of tweaks enabled by this bit:
+ * - With both FULL amplitude and FULL bias current: bias current
+ *   is set to half.
+ * - With only DSP amplitude: bias current is set to half and
+ *   is set to 1/4 with cable < 10m.
+ * - With DSP bias current (included both DSP amplitude and
+ *   DSP bias current): bias current is half the detected current
+ *   with cable < 10m.
+ */
+#define QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK			BIT(2)
+#define QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT			BIT(1)
+#define QCA807X_CONTROL_DAC_DSP_AMPLITUDE			BIT(0)
+
+#define QCA807X_MMD7_LED_100N_1				0x8074
+#define QCA807X_MMD7_LED_100N_2				0x8075
+#define QCA807X_MMD7_LED_1000N_1			0x8076
+#define QCA807X_MMD7_LED_1000N_2			0x8077
+
+#define QCA807X_MMD7_LED_CTRL(x)			(0x8074 + ((x) * 2))
+#define QCA807X_MMD7_LED_FORCE_CTRL(x)			(0x8075 + ((x) * 2))
+
+/* LED hw control pattern for fiber port */
+#define QCA807X_LED_FIBER_PATTERN_MASK			GENMASK(11, 1)
+#define QCA807X_LED_FIBER_TXACT_BLK_EN			BIT(10)
+#define QCA807X_LED_FIBER_RXACT_BLK_EN			BIT(9)
+#define QCA807X_LED_FIBER_FDX_ON_EN			BIT(6)
+#define QCA807X_LED_FIBER_HDX_ON_EN			BIT(5)
+#define QCA807X_LED_FIBER_1000BX_ON_EN			BIT(2)
+#define QCA807X_LED_FIBER_100FX_ON_EN			BIT(1)
+
+/* Some device repurpose the LED as GPIO out */
+#define QCA807X_GPIO_FORCE_EN				QCA808X_LED_FORCE_EN
+#define QCA807X_GPIO_FORCE_MODE_MASK			QCA808X_LED_FORCE_MODE_MASK
+
+#define QCA807X_FUNCTION_CONTROL			0x10
+#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK		GENMASK(6, 5)
+#define QCA807X_FC_MDI_CROSSOVER_AUTO			3
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX		1
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI		0
+
+/* PQSGMII Analog PHY specific */
+#define PQSGMII_CTRL_REG				0x0
+#define PQSGMII_ANALOG_SW_RESET				BIT(6)
+#define PQSGMII_DRIVE_CONTROL_1				0xb
+#define PQSGMII_TX_DRIVER_MASK				GENMASK(7, 4)
+#define PQSGMII_TX_DRIVER_140MV				0x0
+#define PQSGMII_TX_DRIVER_160MV				0x1
+#define PQSGMII_TX_DRIVER_180MV				0x2
+#define PQSGMII_TX_DRIVER_200MV				0x3
+#define PQSGMII_TX_DRIVER_220MV				0x4
+#define PQSGMII_TX_DRIVER_240MV				0x5
+#define PQSGMII_TX_DRIVER_260MV				0x6
+#define PQSGMII_TX_DRIVER_280MV				0x7
+#define PQSGMII_TX_DRIVER_300MV				0x8
+#define PQSGMII_TX_DRIVER_320MV				0x9
+#define PQSGMII_TX_DRIVER_400MV				0xa
+#define PQSGMII_TX_DRIVER_500MV				0xb
+#define PQSGMII_TX_DRIVER_600MV				0xc
+#define PQSGMII_MODE_CTRL				0x6d
+#define PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK		BIT(0)
+#define PQSGMII_MMD3_SERDES_CONTROL			0x805a
+
+#define PHY_ID_QCA8072		0x004dd0b2
+#define PHY_ID_QCA8075		0x004dd0b1
+
+#define QCA807X_COMBO_ADDR_OFFSET			4
+#define QCA807X_PQSGMII_ADDR_OFFSET			5
+#define SERDES_RESET_SLEEP				100
+
+enum qca807x_global_phy {
+	QCA807X_COMBO_ADDR = 4,
+	QCA807X_PQSGMII_ADDR = 5,
+};
+
+struct qca807x_shared_priv {
+	unsigned int package_mode;
+	u32 tx_drive_strength;
+};
+
+struct qca807x_gpio_priv {
+	struct phy_device *phy;
+};
+
+struct qca807x_priv {
+	bool dac_full_amplitude;
+	bool dac_full_bias_current;
+	bool dac_disable_bias_current_tweak;
+};
+
+static int qca807x_cable_test_start(struct phy_device *phydev)
+{
+	/* we do all the (time consuming) work later */
+	return 0;
+}
+
+static int qca807x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
+				    u16 *offload_trigger)
+{
+	/* Parsing specific to netdev trigger */
+	switch (phydev->port) {
+	case PORT_TP:
+		if (test_bit(TRIGGER_NETDEV_TX, &rules))
+			*offload_trigger |= QCA808X_LED_TX_BLINK;
+		if (test_bit(TRIGGER_NETDEV_RX, &rules))
+			*offload_trigger |= QCA808X_LED_RX_BLINK;
+		if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
+			*offload_trigger |= QCA808X_LED_SPEED10_ON;
+		if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
+			*offload_trigger |= QCA808X_LED_SPEED100_ON;
+		if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
+			*offload_trigger |= QCA808X_LED_SPEED1000_ON;
+		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
+			*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
+		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
+			*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
+		break;
+	case PORT_FIBRE:
+		if (test_bit(TRIGGER_NETDEV_TX, &rules))
+			*offload_trigger |= QCA807X_LED_FIBER_TXACT_BLK_EN;
+		if (test_bit(TRIGGER_NETDEV_RX, &rules))
+			*offload_trigger |= QCA807X_LED_FIBER_RXACT_BLK_EN;
+		if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
+			*offload_trigger |= QCA807X_LED_FIBER_100FX_ON_EN;
+		if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
+			*offload_trigger |= QCA807X_LED_FIBER_1000BX_ON_EN;
+		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
+			*offload_trigger |= QCA807X_LED_FIBER_HDX_ON_EN;
+		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
+			*offload_trigger |= QCA807X_LED_FIBER_FDX_ON_EN;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (rules && !*offload_trigger)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static int qca807x_led_hw_control_enable(struct phy_device *phydev, u8 index)
+{
+	u16 reg;
+
+	if (index > 1)
+		return -EINVAL;
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_hw_control_enable(phydev, reg);
+}
+
+static int qca807x_led_hw_is_supported(struct phy_device *phydev, u8 index,
+				       unsigned long rules)
+{
+	u16 offload_trigger = 0;
+
+	if (index > 1)
+		return -EINVAL;
+
+	return qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
+}
+
+static int qca807x_led_hw_control_set(struct phy_device *phydev, u8 index,
+				      unsigned long rules)
+{
+	u16 reg, mask, offload_trigger = 0;
+	int ret;
+
+	if (index > 1)
+		return -EINVAL;
+
+	ret = qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
+	if (ret)
+		return ret;
+
+	ret = qca807x_led_hw_control_enable(phydev, index);
+	if (ret)
+		return ret;
+
+	switch (phydev->port) {
+	case PORT_TP:
+		reg = QCA807X_MMD7_LED_CTRL(index);
+		mask = QCA808X_LED_PATTERN_MASK;
+		break;
+	case PORT_FIBRE:
+		/* HW control pattern bits are in LED FORCE reg */
+		reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+		mask = QCA807X_LED_FIBER_PATTERN_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, mask,
+			      offload_trigger);
+}
+
+static bool qca807x_led_hw_control_status(struct phy_device *phydev, u8 index)
+{
+	u16 reg;
+
+	if (index > 1)
+		return false;
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_hw_control_status(phydev, reg);
+}
+
+static int qca807x_led_hw_control_get(struct phy_device *phydev, u8 index,
+				      unsigned long *rules)
+{
+	u16 reg;
+	int val;
+
+	if (index > 1)
+		return -EINVAL;
+
+	/* Check if we have hw control enabled */
+	if (qca807x_led_hw_control_status(phydev, index))
+		return -EINVAL;
+
+	/* Parsing specific to netdev trigger */
+	switch (phydev->port) {
+	case PORT_TP:
+		reg = QCA807X_MMD7_LED_CTRL(index);
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
+		if (val & QCA808X_LED_TX_BLINK)
+			set_bit(TRIGGER_NETDEV_TX, rules);
+		if (val & QCA808X_LED_RX_BLINK)
+			set_bit(TRIGGER_NETDEV_RX, rules);
+		if (val & QCA808X_LED_SPEED10_ON)
+			set_bit(TRIGGER_NETDEV_LINK_10, rules);
+		if (val & QCA808X_LED_SPEED100_ON)
+			set_bit(TRIGGER_NETDEV_LINK_100, rules);
+		if (val & QCA808X_LED_SPEED1000_ON)
+			set_bit(TRIGGER_NETDEV_LINK_1000, rules);
+		if (val & QCA808X_LED_HALF_DUPLEX_ON)
+			set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
+		if (val & QCA808X_LED_FULL_DUPLEX_ON)
+			set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
+		break;
+	case PORT_FIBRE:
+		/* HW control pattern bits are in LED FORCE reg */
+		reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
+		if (val & QCA807X_LED_FIBER_TXACT_BLK_EN)
+			set_bit(TRIGGER_NETDEV_TX, rules);
+		if (val & QCA807X_LED_FIBER_RXACT_BLK_EN)
+			set_bit(TRIGGER_NETDEV_RX, rules);
+		if (val & QCA807X_LED_FIBER_100FX_ON_EN)
+			set_bit(TRIGGER_NETDEV_LINK_100, rules);
+		if (val & QCA807X_LED_FIBER_1000BX_ON_EN)
+			set_bit(TRIGGER_NETDEV_LINK_1000, rules);
+		if (val & QCA807X_LED_FIBER_HDX_ON_EN)
+			set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
+		if (val & QCA807X_LED_FIBER_FDX_ON_EN)
+			set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int qca807x_led_hw_control_reset(struct phy_device *phydev, u8 index)
+{
+	u16 reg, mask;
+
+	if (index > 1)
+		return -EINVAL;
+
+	switch (phydev->port) {
+	case PORT_TP:
+		reg = QCA807X_MMD7_LED_CTRL(index);
+		mask = QCA808X_LED_PATTERN_MASK;
+		break;
+	case PORT_FIBRE:
+		/* HW control pattern bits are in LED FORCE reg */
+		reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+		mask = QCA807X_LED_FIBER_PATTERN_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, mask);
+}
+
+static int qca807x_led_brightness_set(struct phy_device *phydev,
+				      u8 index, enum led_brightness value)
+{
+	u16 reg;
+	int ret;
+
+	if (index > 1)
+		return -EINVAL;
+
+	/* If we are setting off the LED reset any hw control rule */
+	if (!value) {
+		ret = qca807x_led_hw_control_reset(phydev, index);
+		if (ret)
+			return ret;
+	}
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_brightness_set(phydev, reg, value);
+}
+
+static int qca807x_led_blink_set(struct phy_device *phydev, u8 index,
+				 unsigned long *delay_on,
+				 unsigned long *delay_off)
+{
+	u16 reg;
+
+	if (index > 1)
+		return -EINVAL;
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int qca807x_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+	u16 reg;
+	int val;
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
+
+	return FIELD_GET(QCA807X_GPIO_FORCE_MODE_MASK, val);
+}
+
+static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+	u16 reg;
+	int val;
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
+
+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
+	val &= ~QCA807X_GPIO_FORCE_MODE_MASK;
+	val |= QCA807X_GPIO_FORCE_EN;
+	val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value);
+
+	phy_write_mmd(priv->phy, MDIO_MMD_AN, reg, val);
+}
+
+static int qca807x_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	qca807x_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int qca807x_gpio(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct qca807x_gpio_priv *priv;
+	struct gpio_chip *gc;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phy = phydev;
+
+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->label = dev_name(dev);
+	gc->base = -1;
+	gc->ngpio = 2;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+	gc->can_sleep = true;
+	gc->get_direction = qca807x_gpio_get_direction;
+	gc->direction_output = qca807x_gpio_dir_out;
+	gc->get = qca807x_gpio_get;
+	gc->set = qca807x_gpio_set;
+
+	return devm_gpiochip_add_data(dev, gc, priv);
+}
+#endif
+
+static int qca807x_read_fiber_status(struct phy_device *phydev)
+{
+	bool changed;
+	int ss, err;
+
+	err = genphy_c37_read_status(phydev, &changed);
+	if (err || !changed)
+		return err;
+
+	/* Read the QCA807x PHY-Specific Status register fiber page,
+	 * which indicates the speed and duplex that the PHY is actually
+	 * using, irrespective of whether we are in autoneg mode or not.
+	 */
+	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
+	if (ss < 0)
+		return ss;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
+		switch (FIELD_GET(AT803X_SS_SPEED_MASK, ss)) {
+		case AT803X_SS_SPEED_100:
+			phydev->speed = SPEED_100;
+			break;
+		case AT803X_SS_SPEED_1000:
+			phydev->speed = SPEED_1000;
+			break;
+		}
+
+		if (ss & AT803X_SS_DUPLEX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+	}
+
+	return 0;
+}
+
+static int qca807x_read_status(struct phy_device *phydev)
+{
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) {
+		switch (phydev->port) {
+		case PORT_FIBRE:
+			return qca807x_read_fiber_status(phydev);
+		case PORT_TP:
+			return at803x_read_status(phydev);
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return at803x_read_status(phydev);
+}
+
+static int qca807x_phy_package_probe_once(struct phy_device *phydev)
+{
+	struct phy_package_shared *shared = phydev->shared;
+	struct qca807x_shared_priv *priv = shared->priv;
+	unsigned int tx_drive_strength;
+	const char *package_mode_name;
+
+	/* Default to 600mw if not defined */
+	if (of_property_read_u32(shared->np, "qcom,tx-drive-strength-milliwatt",
+				 &tx_drive_strength))
+		tx_drive_strength = 600;
+
+	switch (tx_drive_strength) {
+	case 140:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_140MV;
+		break;
+	case 160:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_160MV;
+		break;
+	case 180:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_180MV;
+		break;
+	case 200:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_200MV;
+		break;
+	case 220:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_220MV;
+		break;
+	case 240:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_240MV;
+		break;
+	case 260:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_260MV;
+		break;
+	case 280:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_280MV;
+		break;
+	case 300:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_300MV;
+		break;
+	case 320:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_320MV;
+		break;
+	case 400:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_400MV;
+		break;
+	case 500:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_500MV;
+		break;
+	case 600:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_600MV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	priv->package_mode = PHY_INTERFACE_MODE_NA;
+	if (!of_property_read_string(shared->np, "qcom,package-mode",
+				     &package_mode_name)) {
+		if (!strcasecmp(package_mode_name,
+				phy_modes(PHY_INTERFACE_MODE_PSGMII)))
+			priv->package_mode = PHY_INTERFACE_MODE_PSGMII;
+		else if (!strcasecmp(package_mode_name,
+				     phy_modes(PHY_INTERFACE_MODE_QSGMII)))
+			priv->package_mode = PHY_INTERFACE_MODE_QSGMII;
+		else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int qca807x_phy_package_config_init_once(struct phy_device *phydev)
+{
+	struct phy_package_shared *shared = phydev->shared;
+	struct qca807x_shared_priv *priv = shared->priv;
+	int val, ret;
+
+	/* Make sure PHY follow PHY package mode if enforced */
+	if (priv->package_mode != PHY_INTERFACE_MODE_NA &&
+	    phydev->interface != priv->package_mode)
+		return -EINVAL;
+
+	phy_lock_mdio_bus(phydev);
+
+	/* Set correct PHY package mode */
+	val = __phy_package_read(phydev, QCA807X_COMBO_ADDR,
+				 QCA807X_CHIP_CONFIGURATION);
+	val &= ~QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK;
+	/* package_mode can be QSGMII or PSGMII and we validate
+	 * this in probe_once.
+	 * With package_mode to NA, we default to PSGMII.
+	 */
+	switch (priv->package_mode) {
+	case PHY_INTERFACE_MODE_QSGMII:
+		val |= QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII;
+		break;
+	case PHY_INTERFACE_MODE_PSGMII:
+	default:
+		val |= QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER;
+	}
+	ret = __phy_package_write(phydev, QCA807X_COMBO_ADDR,
+				  QCA807X_CHIP_CONFIGURATION, val);
+	if (ret)
+		goto exit;
+
+	/* After mode change Serdes reset is required */
+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+				 PQSGMII_CTRL_REG);
+	val &= ~PQSGMII_ANALOG_SW_RESET;
+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+				  PQSGMII_CTRL_REG, val);
+	if (ret)
+		goto exit;
+
+	msleep(SERDES_RESET_SLEEP);
+
+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+				 PQSGMII_CTRL_REG);
+	val |= PQSGMII_ANALOG_SW_RESET;
+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+				  PQSGMII_CTRL_REG, val);
+	if (ret)
+		goto exit;
+
+	/* Workaround to enable AZ transmitting ability */
+	val = __phy_package_read_mmd(phydev, QCA807X_PQSGMII_ADDR,
+				     MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL);
+	val &= ~PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK;
+	ret = __phy_package_write_mmd(phydev, QCA807X_PQSGMII_ADDR,
+				      MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL, val);
+	if (ret)
+		goto exit;
+
+	/* Set PQSGMII TX AMP strength */
+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+				 PQSGMII_DRIVE_CONTROL_1);
+	val &= ~PQSGMII_TX_DRIVER_MASK;
+	val |= FIELD_PREP(PQSGMII_TX_DRIVER_MASK, priv->tx_drive_strength);
+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+				  PQSGMII_DRIVE_CONTROL_1, val);
+	if (ret)
+		goto exit;
+
+	/* Prevent PSGMII going into hibernation via PSGMII self test */
+	val = __phy_package_read_mmd(phydev, QCA807X_COMBO_ADDR,
+				     MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL);
+	val &= ~BIT(1);
+	ret = __phy_package_write_mmd(phydev, QCA807X_COMBO_ADDR,
+				      MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL, val);
+
+exit:
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+
+static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+	struct phy_device *phydev = upstream;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	phy_interface_t iface;
+	int ret;
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
+
+	sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
+	iface = sfp_select_interface(phydev->sfp_bus, support);
+
+	dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface));
+
+	switch (iface) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_100BASEX:
+		/* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */
+		ret = phy_modify(phydev,
+				 QCA807X_CHIP_CONFIGURATION,
+				 QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK,
+				 QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER);
+		/* Enable fiber mode autodection (1000Base-X or 100Base-FX) */
+		ret = phy_set_bits_mmd(phydev,
+				       MDIO_MMD_AN,
+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION,
+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN);
+		/* Select fiber page */
+		ret = phy_clear_bits(phydev,
+				     QCA807X_CHIP_CONFIGURATION,
+				     QCA807X_BT_BX_REG_SEL);
+
+		phydev->port = PORT_FIBRE;
+		break;
+	default:
+		dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static void qca807x_sfp_remove(void *upstream)
+{
+	struct phy_device *phydev = upstream;
+
+	/* Select copper page */
+	phy_set_bits(phydev,
+		     QCA807X_CHIP_CONFIGURATION,
+		     QCA807X_BT_BX_REG_SEL);
+
+	phydev->port = PORT_TP;
+}
+
+static const struct sfp_upstream_ops qca807x_sfp_ops = {
+	.attach = phy_sfp_attach,
+	.detach = phy_sfp_detach,
+	.module_insert = qca807x_sfp_insert,
+	.module_remove = qca807x_sfp_remove,
+};
+
+static int qca807x_probe(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct qca807x_shared_priv *shared_priv;
+	struct device *dev = &phydev->mdio.dev;
+	struct phy_package_shared *shared;
+	struct qca807x_priv *priv;
+	int ret;
+
+	ret = devm_of_phy_package_join(dev, phydev, sizeof(*shared_priv));
+	if (ret)
+		return ret;
+
+	if (phy_package_probe_once(phydev)) {
+		ret = qca807x_phy_package_probe_once(phydev);
+		if (ret)
+			return ret;
+	}
+
+	shared = phydev->shared;
+	shared_priv = shared->priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dac_full_amplitude = of_property_read_bool(node, "qcom,dac-full-amplitude");
+	priv->dac_full_bias_current = of_property_read_bool(node, "qcom,dac-full-bias-current");
+	priv->dac_disable_bias_current_tweak = of_property_read_bool(node,
+								     "qcom,dac-disable-bias-current-tweak");
+
+#if IS_ENABLED(CONFIG_GPIOLIB)
+	/* Make sure we don't have mixed leds node and gpio-controller
+	 * to prevent registering leds and having gpio-controller usage
+	 * conflicting with them.
+	 */
+	if (of_find_property(node, "leds", NULL) &&
+	    of_find_property(node, "gpio-controller", NULL)) {
+		phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive.");
+		return -EINVAL;
+	}
+
+	/* Do not register a GPIO controller unless flagged for it */
+	if (of_property_read_bool(node, "gpio-controller")) {
+		ret = qca807x_gpio(phydev);
+		if (ret)
+			return ret;
+	}
+#endif
+
+	/* Attach SFP bus on combo port*/
+	if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
+		ret = phy_sfp_probe(phydev, &qca807x_sfp_ops);
+		if (ret)
+			return ret;
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising);
+	}
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static int qca807x_config_init(struct phy_device *phydev)
+{
+	struct qca807x_priv *priv = phydev->priv;
+	u16 control_dac;
+	int ret;
+
+	if (phy_package_init_once(phydev)) {
+		ret = qca807x_phy_package_config_init_once(phydev);
+		if (ret)
+			return ret;
+	}
+
+	control_dac = phy_read_mmd(phydev, MDIO_MMD_AN,
+				   QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH);
+	control_dac &= ~QCA807X_CONTROL_DAC_MASK;
+	if (!priv->dac_full_amplitude)
+		control_dac |= QCA807X_CONTROL_DAC_DSP_AMPLITUDE;
+	if (!priv->dac_full_amplitude)
+		control_dac |= QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT;
+	if (!priv->dac_disable_bias_current_tweak)
+		control_dac |= QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK;
+	return phy_write_mmd(phydev, MDIO_MMD_AN,
+			     QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH,
+			     control_dac);
+}
+
+static struct phy_driver qca807x_drivers[] = {
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8072),
+		.name           = "Qualcomm QCA8072",
+		.flags		= PHY_POLL_CABLE_TEST,
+		/* PHY_GBIT_FEATURES */
+		.probe		= qca807x_probe,
+		.config_init	= qca807x_config_init,
+		.read_status	= qca807x_read_status,
+		.config_intr	= at803x_config_intr,
+		.handle_interrupt = at803x_handle_interrupt,
+		.soft_reset	= genphy_soft_reset,
+		.get_tunable	= at803x_get_tunable,
+		.set_tunable	= at803x_set_tunable,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.cable_test_start	= qca807x_cable_test_start,
+		.cable_test_get_status	= qca808x_cable_test_get_status,
+	},
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
+		.name           = "Qualcomm QCA8075",
+		.flags		= PHY_POLL_CABLE_TEST,
+		/* PHY_GBIT_FEATURES */
+		.probe		= qca807x_probe,
+		.config_init	= qca807x_config_init,
+		.read_status	= qca807x_read_status,
+		.config_intr	= at803x_config_intr,
+		.handle_interrupt = at803x_handle_interrupt,
+		.soft_reset	= genphy_soft_reset,
+		.get_tunable	= at803x_get_tunable,
+		.set_tunable	= at803x_set_tunable,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.cable_test_start	= qca807x_cable_test_start,
+		.cable_test_get_status	= qca808x_cable_test_get_status,
+		.led_brightness_set = qca807x_led_brightness_set,
+		.led_blink_set = qca807x_led_blink_set,
+		.led_hw_is_supported = qca807x_led_hw_is_supported,
+		.led_hw_control_set = qca807x_led_hw_control_set,
+		.led_hw_control_get = qca807x_led_hw_control_get,
+	},
+};
+module_phy_driver(qca807x_drivers);
+
+static struct mdio_device_id __maybe_unused qca807x_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8072) },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8075) },
+	{ }
+};
+
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("Qualcomm QCA807x PHY driver");
+MODULE_DEVICE_TABLE(mdio, qca807x_tbl);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
new file mode 100644
index 0000000000..5048304ccc
--- /dev/null
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include "qcom.h"
+
+/* ADC threshold */
+#define QCA808X_PHY_DEBUG_ADC_THRESHOLD		0x2c80
+#define QCA808X_ADC_THRESHOLD_MASK		GENMASK(7, 0)
+#define QCA808X_ADC_THRESHOLD_80MV		0
+#define QCA808X_ADC_THRESHOLD_100MV		0xf0
+#define QCA808X_ADC_THRESHOLD_200MV		0x0f
+#define QCA808X_ADC_THRESHOLD_300MV		0xff
+
+/* CLD control */
+#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7		0x8007
+#define QCA808X_8023AZ_AFE_CTRL_MASK		GENMASK(8, 4)
+#define QCA808X_8023AZ_AFE_EN			0x90
+
+/* AZ control */
+#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL	0x8008
+#define QCA808X_MMD3_AZ_TRAINING_VAL		0x1c32
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB	0x8014
+#define QCA808X_MSE_THRESHOLD_20DB_VALUE	0x529
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB	0x800E
+#define QCA808X_MSE_THRESHOLD_17DB_VALUE	0x341
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB	0x801E
+#define QCA808X_MSE_THRESHOLD_27DB_VALUE	0x419
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB	0x8020
+#define QCA808X_MSE_THRESHOLD_28DB_VALUE	0x341
+
+#define QCA808X_PHY_MMD7_TOP_OPTION1		0x901c
+#define QCA808X_TOP_OPTION1_DATA		0x0
+
+#define QCA808X_PHY_MMD3_DEBUG_1		0xa100
+#define QCA808X_MMD3_DEBUG_1_VALUE		0x9203
+#define QCA808X_PHY_MMD3_DEBUG_2		0xa101
+#define QCA808X_MMD3_DEBUG_2_VALUE		0x48ad
+#define QCA808X_PHY_MMD3_DEBUG_3		0xa103
+#define QCA808X_MMD3_DEBUG_3_VALUE		0x1698
+#define QCA808X_PHY_MMD3_DEBUG_4		0xa105
+#define QCA808X_MMD3_DEBUG_4_VALUE		0x8001
+#define QCA808X_PHY_MMD3_DEBUG_5		0xa106
+#define QCA808X_MMD3_DEBUG_5_VALUE		0x1111
+#define QCA808X_PHY_MMD3_DEBUG_6		0xa011
+#define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
+
+/* master/slave seed config */
+#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
+#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
+#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
+#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
+
+/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
+ * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
+ */
+#define QCA808X_DBG_AN_TEST			0xb
+#define QCA808X_HIBERNATION_EN			BIT(15)
+
+#define QCA808X_MMD7_LED2_CTRL			0x8074
+#define QCA808X_MMD7_LED2_FORCE_CTRL		0x8075
+#define QCA808X_MMD7_LED1_CTRL			0x8076
+#define QCA808X_MMD7_LED1_FORCE_CTRL		0x8077
+#define QCA808X_MMD7_LED0_CTRL			0x8078
+#define QCA808X_MMD7_LED_CTRL(x)		(0x8078 - ((x) * 2))
+
+#define QCA808X_MMD7_LED0_FORCE_CTRL		0x8079
+#define QCA808X_MMD7_LED_FORCE_CTRL(x)		(0x8079 - ((x) * 2))
+
+#define QCA808X_MMD7_LED_POLARITY_CTRL		0x901a
+/* QSDK sets by default 0x46 to this reg that sets BIT 6 for
+ * LED to active high. It's not clear what BIT 3 and BIT 4 does.
+ */
+#define QCA808X_LED_ACTIVE_HIGH			BIT(6)
+
+/* QCA808X 1G chip type */
+#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
+#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
+
+#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
+#define QCA8081_PHY_FIFO_RSTN			BIT(11)
+
+#define QCA8081_PHY_ID				0x004dd101
+
+MODULE_DESCRIPTION("Qualcomm Atheros QCA808X PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+struct qca808x_priv {
+	int led_polarity_mode;
+};
+
+static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable fast retrain */
+	ret = genphy_c45_fast_retrain(phydev, true);
+	if (ret)
+		return ret;
+
+	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
+		      QCA808X_TOP_OPTION1_DATA);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
+		      QCA808X_MSE_THRESHOLD_20DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
+		      QCA808X_MSE_THRESHOLD_17DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
+		      QCA808X_MSE_THRESHOLD_27DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
+		      QCA808X_MSE_THRESHOLD_28DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
+		      QCA808X_MMD3_DEBUG_1_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
+		      QCA808X_MMD3_DEBUG_4_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
+		      QCA808X_MMD3_DEBUG_5_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
+		      QCA808X_MMD3_DEBUG_3_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
+		      QCA808X_MMD3_DEBUG_6_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
+		      QCA808X_MMD3_DEBUG_2_VALUE);
+
+	return 0;
+}
+
+static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
+{
+	u16 seed_value;
+
+	if (!enable)
+		return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+				QCA808X_MASTER_SLAVE_SEED_ENABLE, 0);
+
+	seed_value = get_random_u32_below(QCA808X_MASTER_SLAVE_SEED_RANGE);
+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+			QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE,
+			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) |
+			QCA808X_MASTER_SLAVE_SEED_ENABLE);
+}
+
+static bool qca808x_is_prefer_master(struct phy_device *phydev)
+{
+	return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) ||
+		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
+}
+
+static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
+{
+	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
+}
+
+static bool qca808x_is_1g_only(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
+	if (ret < 0)
+		return true;
+
+	return !!(QCA808X_PHY_CHIP_TYPE_1G & ret);
+}
+
+static void qca808x_fill_possible_interfaces(struct phy_device *phydev)
+{
+	unsigned long *possible = phydev->possible_interfaces;
+
+	__set_bit(PHY_INTERFACE_MODE_SGMII, possible);
+
+	if (!qca808x_is_1g_only(phydev))
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX, possible);
+}
+
+static int qca808x_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct qca808x_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Init LED polarity mode to -1 */
+	priv->led_polarity_mode = -1;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static int qca808x_config_init(struct phy_device *phydev)
+{
+	struct qca808x_priv *priv = phydev->priv;
+	int ret;
+
+	/* Default to LED Active High if active-low not in DT */
+	if (priv->led_polarity_mode == -1) {
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN,
+				       QCA808X_MMD7_LED_POLARITY_CTRL,
+				       QCA808X_LED_ACTIVE_HIGH);
+		if (ret)
+			return ret;
+	}
+
+	/* Active adc&vga on 802.3az for the link 1000M and 100M */
+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
+			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
+	if (ret)
+		return ret;
+
+	/* Adjust the threshold on 802.3az for the link 1000M */
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			    QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
+			    QCA808X_MMD3_AZ_TRAINING_VAL);
+	if (ret)
+		return ret;
+
+	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+		/* Config the fast retrain for the link 2500M */
+		ret = qca808x_phy_fast_retrain_config(phydev);
+		if (ret)
+			return ret;
+
+		ret = genphy_read_master_slave(phydev);
+		if (ret < 0)
+			return ret;
+
+		if (!qca808x_is_prefer_master(phydev)) {
+			/* Enable seed and configure lower ramdom seed to make phy
+			 * linked as slave mode.
+			 */
+			ret = qca808x_phy_ms_seed_enable(phydev, true);
+			if (ret)
+				return ret;
+		}
+	}
+
+	qca808x_fill_possible_interfaces(phydev);
+
+	/* Configure adc threshold as 100mv for the link 10M */
+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
+				     QCA808X_ADC_THRESHOLD_MASK,
+				     QCA808X_ADC_THRESHOLD_100MV);
+}
+
+static int qca808x_read_status(struct phy_device *phydev)
+{
+	struct at803x_ss_mask ss_mask = { 0 };
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+	if (ret < 0)
+		return ret;
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
+			 ret & MDIO_AN_10GBT_STAT_LP2_5G);
+
+	ret = genphy_read_status(phydev);
+	if (ret)
+		return ret;
+
+	/* qca8081 takes the different bits for speed value from at803x */
+	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
+	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
+	ret = at803x_read_specific_status(phydev, ss_mask);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->link) {
+		if (phydev->speed == SPEED_2500)
+			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+		else
+			phydev->interface = PHY_INTERFACE_MODE_SGMII;
+	} else {
+		/* generate seed as a lower random value to make PHY linked as SLAVE easily,
+		 * except for master/slave configuration fault detected or the master mode
+		 * preferred.
+		 *
+		 * the reason for not putting this code into the function link_change_notify is
+		 * the corner case where the link partner is also the qca8081 PHY and the seed
+		 * value is configured as the same value, the link can't be up and no link change
+		 * occurs.
+		 */
+		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
+			    qca808x_is_prefer_master(phydev)) {
+				qca808x_phy_ms_seed_enable(phydev, false);
+			} else {
+				qca808x_phy_ms_seed_enable(phydev, true);
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int qca808x_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_soft_reset(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
+		ret = qca808x_phy_ms_seed_enable(phydev, true);
+
+	return ret;
+}
+
+static int qca808x_cable_test_start(struct phy_device *phydev)
+{
+	int ret;
+
+	/* perform CDT with the following configs:
+	 * 1. disable hibernation.
+	 * 2. force PHY working in MDI mode.
+	 * 3. for PHY working in 1000BaseT.
+	 * 4. configure the threshold.
+	 */
+
+	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
+	if (ret < 0)
+		return ret;
+
+	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
+	phydev->duplex = DUPLEX_FULL;
+	phydev->speed = SPEED_1000;
+	ret = genphy_c45_pma_setup_forced(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = genphy_setup_forced(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* configure the thresholds for open, short, pair ok test */
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
+
+	return 0;
+}
+
+static int qca808x_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_c45_pma_read_abilities(phydev);
+	if (ret)
+		return ret;
+
+	/* The autoneg ability is not existed in bit3 of MMD7.1,
+	 * but it is supported by qca808x PHY, so we add it here
+	 * manually.
+	 */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+	/* As for the qca8081 1G version chip, the 2500baseT ability is also
+	 * existed in the bit0 of MMD1.21, we need to remove it manually if
+	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
+	 */
+	if (qca808x_is_1g_only(phydev))
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
+
+	return 0;
+}
+
+static int qca808x_config_aneg(struct phy_device *phydev)
+{
+	int phy_ctrl = 0;
+	int ret;
+
+	ret = at803x_prepare_config_aneg(phydev);
+	if (ret)
+		return ret;
+
+	/* The reg MII_BMCR also needs to be configured for force mode, the
+	 * genphy_config_aneg is also needed.
+	 */
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		genphy_c45_pma_setup_forced(phydev);
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
+		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
+	if (ret < 0)
+		return ret;
+
+	return __genphy_config_aneg(phydev, ret);
+}
+
+static void qca808x_link_change_notify(struct phy_device *phydev)
+{
+	/* Assert interface sgmii fifo on link down, deassert it on link up,
+	 * the interface device address is always phy address added by 1.
+	 */
+	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
+				   MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
+				   QCA8081_PHY_FIFO_RSTN,
+				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
+}
+
+static int qca808x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
+				    u16 *offload_trigger)
+{
+	/* Parsing specific to netdev trigger */
+	if (test_bit(TRIGGER_NETDEV_TX, &rules))
+		*offload_trigger |= QCA808X_LED_TX_BLINK;
+	if (test_bit(TRIGGER_NETDEV_RX, &rules))
+		*offload_trigger |= QCA808X_LED_RX_BLINK;
+	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
+		*offload_trigger |= QCA808X_LED_SPEED10_ON;
+	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
+		*offload_trigger |= QCA808X_LED_SPEED100_ON;
+	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
+		*offload_trigger |= QCA808X_LED_SPEED1000_ON;
+	if (test_bit(TRIGGER_NETDEV_LINK_2500, &rules))
+		*offload_trigger |= QCA808X_LED_SPEED2500_ON;
+	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
+		*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
+	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
+		*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
+
+	if (rules && !*offload_trigger)
+		return -EOPNOTSUPP;
+
+	/* Enable BLINK_CHECK_BYPASS by default to make the LED
+	 * blink even with duplex or speed mode not enabled.
+	 */
+	*offload_trigger |= QCA808X_LED_BLINK_CHECK_BYPASS;
+
+	return 0;
+}
+
+static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index)
+{
+	u16 reg;
+
+	if (index > 2)
+		return -EINVAL;
+
+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_hw_control_enable(phydev, reg);
+}
+
+static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
+				       unsigned long rules)
+{
+	u16 offload_trigger = 0;
+
+	if (index > 2)
+		return -EINVAL;
+
+	return qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
+}
+
+static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index,
+				      unsigned long rules)
+{
+	u16 reg, offload_trigger = 0;
+	int ret;
+
+	if (index > 2)
+		return -EINVAL;
+
+	reg = QCA808X_MMD7_LED_CTRL(index);
+
+	ret = qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
+	if (ret)
+		return ret;
+
+	ret = qca808x_led_hw_control_enable(phydev, index);
+	if (ret)
+		return ret;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
+			      QCA808X_LED_PATTERN_MASK,
+			      offload_trigger);
+}
+
+static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
+{
+	u16 reg;
+
+	if (index > 2)
+		return false;
+
+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_hw_control_status(phydev, reg);
+}
+
+static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
+				      unsigned long *rules)
+{
+	u16 reg;
+	int val;
+
+	if (index > 2)
+		return -EINVAL;
+
+	/* Check if we have hw control enabled */
+	if (qca808x_led_hw_control_status(phydev, index))
+		return -EINVAL;
+
+	reg = QCA808X_MMD7_LED_CTRL(index);
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
+	if (val & QCA808X_LED_TX_BLINK)
+		set_bit(TRIGGER_NETDEV_TX, rules);
+	if (val & QCA808X_LED_RX_BLINK)
+		set_bit(TRIGGER_NETDEV_RX, rules);
+	if (val & QCA808X_LED_SPEED10_ON)
+		set_bit(TRIGGER_NETDEV_LINK_10, rules);
+	if (val & QCA808X_LED_SPEED100_ON)
+		set_bit(TRIGGER_NETDEV_LINK_100, rules);
+	if (val & QCA808X_LED_SPEED1000_ON)
+		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
+	if (val & QCA808X_LED_SPEED2500_ON)
+		set_bit(TRIGGER_NETDEV_LINK_2500, rules);
+	if (val & QCA808X_LED_HALF_DUPLEX_ON)
+		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
+	if (val & QCA808X_LED_FULL_DUPLEX_ON)
+		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
+
+	return 0;
+}
+
+static int qca808x_led_hw_control_reset(struct phy_device *phydev, u8 index)
+{
+	u16 reg;
+
+	if (index > 2)
+		return -EINVAL;
+
+	reg = QCA808X_MMD7_LED_CTRL(index);
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
+				  QCA808X_LED_PATTERN_MASK);
+}
+
+static int qca808x_led_brightness_set(struct phy_device *phydev,
+				      u8 index, enum led_brightness value)
+{
+	u16 reg;
+	int ret;
+
+	if (index > 2)
+		return -EINVAL;
+
+	if (!value) {
+		ret = qca808x_led_hw_control_reset(phydev, index);
+		if (ret)
+			return ret;
+	}
+
+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_brightness_set(phydev, reg, value);
+}
+
+static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
+				 unsigned long *delay_on,
+				 unsigned long *delay_off)
+{
+	u16 reg;
+
+	if (index > 2)
+		return -EINVAL;
+
+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
+	return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off);
+}
+
+static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
+				    unsigned long modes)
+{
+	struct qca808x_priv *priv = phydev->priv;
+	bool active_low = false;
+	u32 mode;
+
+	for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
+		switch (mode) {
+		case PHY_LED_ACTIVE_LOW:
+			active_low = true;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	/* PHY polarity is global and can't be set per LED.
+	 * To detect this, check if last requested polarity mode
+	 * match the new one.
+	 */
+	if (priv->led_polarity_mode >= 0 &&
+	    priv->led_polarity_mode != active_low) {
+		phydev_err(phydev, "PHY polarity is global. Mismatched polarity on different LED\n");
+		return -EINVAL;
+	}
+
+	/* Save the last PHY polarity mode */
+	priv->led_polarity_mode = active_low;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_AN,
+			      QCA808X_MMD7_LED_POLARITY_CTRL,
+			      QCA808X_LED_ACTIVE_HIGH,
+			      active_low ? 0 : QCA808X_LED_ACTIVE_HIGH);
+}
+
+static struct phy_driver qca808x_driver[] = {
+{
+	/* Qualcomm QCA8081 */
+	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
+	.name			= "Qualcomm QCA8081",
+	.flags			= PHY_POLL_CABLE_TEST,
+	.probe			= qca808x_probe,
+	.config_intr		= at803x_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+	.get_tunable		= at803x_get_tunable,
+	.set_tunable		= at803x_set_tunable,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.get_features		= qca808x_get_features,
+	.config_aneg		= qca808x_config_aneg,
+	.suspend		= genphy_suspend,
+	.resume			= genphy_resume,
+	.read_status		= qca808x_read_status,
+	.config_init		= qca808x_config_init,
+	.soft_reset		= qca808x_soft_reset,
+	.cable_test_start	= qca808x_cable_test_start,
+	.cable_test_get_status	= qca808x_cable_test_get_status,
+	.link_change_notify	= qca808x_link_change_notify,
+	.led_brightness_set	= qca808x_led_brightness_set,
+	.led_blink_set		= qca808x_led_blink_set,
+	.led_hw_is_supported	= qca808x_led_hw_is_supported,
+	.led_hw_control_set	= qca808x_led_hw_control_set,
+	.led_hw_control_get	= qca808x_led_hw_control_get,
+	.led_polarity_set	= qca808x_led_polarity_set,
+}, };
+
+module_phy_driver(qca808x_driver);
+
+static struct mdio_device_id __maybe_unused qca808x_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, qca808x_tbl);
diff --git a/drivers/net/phy/qcom/qca83xx.c b/drivers/net/phy/qcom/qca83xx.c
new file mode 100644
index 0000000000..5d083ef025
--- /dev/null
+++ b/drivers/net/phy/qcom/qca83xx.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include "qcom.h"
+
+#define AT803X_DEBUG_REG_3C			0x3C
+
+#define AT803X_DEBUG_REG_GREEN			0x3D
+#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
+
+#define MDIO_AZ_DEBUG				0x800D
+
+#define QCA8327_A_PHY_ID			0x004dd033
+#define QCA8327_B_PHY_ID			0x004dd034
+#define QCA8337_PHY_ID				0x004dd036
+#define QCA8K_PHY_ID_MASK			0xffffffff
+
+#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
+
+static struct at803x_hw_stat qca83xx_hw_stats[] = {
+	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
+	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
+	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
+};
+
+struct qca83xx_priv {
+	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
+};
+
+MODULE_DESCRIPTION("Qualcomm Atheros QCA83XX PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL");
+
+static int qca83xx_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(qca83xx_hw_stats);
+}
+
+static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
+		strscpy(data + i * ETH_GSTRING_LEN,
+			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
+{
+	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
+	struct qca83xx_priv *priv = phydev->priv;
+	int val;
+	u64 ret;
+
+	if (stat.access_type == MMD)
+		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
+	else
+		val = phy_read(phydev, stat.reg);
+
+	if (val < 0) {
+		ret = U64_MAX;
+	} else {
+		val = val & stat.mask;
+		priv->stats[i] += val;
+		ret = priv->stats[i];
+	}
+
+	return ret;
+}
+
+static void qca83xx_get_stats(struct phy_device *phydev,
+			      struct ethtool_stats *stats, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
+		data[i] = qca83xx_get_stat(phydev, i);
+}
+
+static int qca83xx_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct qca83xx_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static int qca83xx_config_init(struct phy_device *phydev)
+{
+	u8 switch_revision;
+
+	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
+
+	switch (switch_revision) {
+	case 1:
+		/* For 100M waveform */
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
+		/* Turn on Gigabit clock */
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
+		break;
+
+	case 2:
+		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
+		fallthrough;
+	case 4:
+		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
+		break;
+	}
+
+	/* Following original QCA sourcecode set port to prefer master */
+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
+
+	return 0;
+}
+
+static int qca8327_config_init(struct phy_device *phydev)
+{
+	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
+	 * Disable on init and enable only with 100m speed following
+	 * qca original source code.
+	 */
+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
+			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
+
+	return qca83xx_config_init(phydev);
+}
+
+static void qca83xx_link_change_notify(struct phy_device *phydev)
+{
+	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
+	if (phydev->state == PHY_RUNNING) {
+		if (phydev->speed == SPEED_100)
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
+					      QCA8327_DEBUG_MANU_CTRL_EN,
+					      QCA8327_DEBUG_MANU_CTRL_EN);
+	} else {
+		/* Reset DAC Amplitude adjustment */
+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
+	}
+}
+
+static int qca83xx_resume(struct phy_device *phydev)
+{
+	int ret, val;
+
+	/* Skip reset if not suspended */
+	if (!phydev->suspended)
+		return 0;
+
+	/* Reinit the port, reset values set by suspend */
+	qca83xx_config_init(phydev);
+
+	/* Reset the port on port resume */
+	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
+
+	/* On resume from suspend the switch execute a reset and
+	 * restart auto-negotiation. Wait for reset to complete.
+	 */
+	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
+				    50000, 600000, true);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+
+static int qca83xx_suspend(struct phy_device *phydev)
+{
+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
+			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
+
+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
+			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
+			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
+
+	return 0;
+}
+
+static int qca8337_suspend(struct phy_device *phydev)
+{
+	/* Only QCA8337 support actual suspend. */
+	genphy_suspend(phydev);
+
+	return qca83xx_suspend(phydev);
+}
+
+static int qca8327_suspend(struct phy_device *phydev)
+{
+	u16 mask = 0;
+
+	/* QCA8327 cause port unreliability when phy suspend
+	 * is set.
+	 */
+	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
+	phy_modify(phydev, MII_BMCR, mask, 0);
+
+	return qca83xx_suspend(phydev);
+}
+
+static struct phy_driver qca83xx_driver[] = {
+{
+	/* QCA8337 */
+	.phy_id			= QCA8337_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8337 internal PHY",
+	/* PHY_GBIT_FEATURES */
+	.probe			= qca83xx_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca83xx_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= qca83xx_get_sset_count,
+	.get_strings		= qca83xx_get_strings,
+	.get_stats		= qca83xx_get_stats,
+	.suspend		= qca8337_suspend,
+	.resume			= qca83xx_resume,
+}, {
+	/* QCA8327-A from switch QCA8327-AL1A */
+	.phy_id			= QCA8327_A_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8327-A internal PHY",
+	/* PHY_GBIT_FEATURES */
+	.link_change_notify	= qca83xx_link_change_notify,
+	.probe			= qca83xx_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca8327_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= qca83xx_get_sset_count,
+	.get_strings		= qca83xx_get_strings,
+	.get_stats		= qca83xx_get_stats,
+	.suspend		= qca8327_suspend,
+	.resume			= qca83xx_resume,
+}, {
+	/* QCA8327-B from switch QCA8327-BL1A */
+	.phy_id			= QCA8327_B_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8327-B internal PHY",
+	/* PHY_GBIT_FEATURES */
+	.link_change_notify	= qca83xx_link_change_notify,
+	.probe			= qca83xx_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca8327_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= qca83xx_get_sset_count,
+	.get_strings		= qca83xx_get_strings,
+	.get_stats		= qca83xx_get_stats,
+	.suspend		= qca8327_suspend,
+	.resume			= qca83xx_resume,
+}, };
+
+module_phy_driver(qca83xx_driver);
+
+static struct mdio_device_id __maybe_unused qca83xx_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, qca83xx_tbl);
diff --git a/drivers/net/phy/qcom/qcom-phy-lib.c b/drivers/net/phy/qcom/qcom-phy-lib.c
new file mode 100644
index 0000000000..d28815ef56
--- /dev/null
+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool_netlink.h>
+
+#include "qcom.h"
+
+MODULE_DESCRIPTION("Qualcomm PHY driver Common Functions");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL");
+
+int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
+{
+	int ret;
+
+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
+	if (ret < 0)
+		return ret;
+
+	return phy_read(phydev, AT803X_DEBUG_DATA);
+}
+EXPORT_SYMBOL_GPL(at803x_debug_reg_read);
+
+int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
+			  u16 clear, u16 set)
+{
+	u16 val;
+	int ret;
+
+	ret = at803x_debug_reg_read(phydev, reg);
+	if (ret < 0)
+		return ret;
+
+	val = ret & 0xffff;
+	val &= ~clear;
+	val |= set;
+
+	return phy_write(phydev, AT803X_DEBUG_DATA, val);
+}
+EXPORT_SYMBOL_GPL(at803x_debug_reg_mask);
+
+int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
+{
+	int ret;
+
+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
+	if (ret < 0)
+		return ret;
+
+	return phy_write(phydev, AT803X_DEBUG_DATA, data);
+}
+EXPORT_SYMBOL_GPL(at803x_debug_reg_write);
+
+int at803x_set_wol(struct phy_device *phydev,
+		   struct ethtool_wolinfo *wol)
+{
+	int ret, irq_enabled;
+
+	if (wol->wolopts & WAKE_MAGIC) {
+		struct net_device *ndev = phydev->attached_dev;
+		const u8 *mac;
+		unsigned int i;
+		static const unsigned int offsets[] = {
+			AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+			AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+			AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+		};
+
+		if (!ndev)
+			return -ENODEV;
+
+		mac = (const u8 *)ndev->dev_addr;
+
+		if (!is_valid_ether_addr(mac))
+			return -EINVAL;
+
+		for (i = 0; i < 3; i++)
+			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
+				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+
+		/* Enable WOL interrupt */
+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
+		if (ret)
+			return ret;
+	} else {
+		/* Disable WOL interrupt */
+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
+		if (ret)
+			return ret;
+	}
+
+	/* Clear WOL status */
+	ret = phy_read(phydev, AT803X_INTR_STATUS);
+	if (ret < 0)
+		return ret;
+
+	/* Check if there are other interrupts except for WOL triggered when PHY is
+	 * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
+	 * be passed up to the interrupt PIN.
+	 */
+	irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
+	if (irq_enabled < 0)
+		return irq_enabled;
+
+	irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
+	if (ret & irq_enabled && !phy_polling_mode(phydev))
+		phy_trigger_machine(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(at803x_set_wol);
+
+void at803x_get_wol(struct phy_device *phydev,
+		    struct ethtool_wolinfo *wol)
+{
+	int value;
+
+	wol->supported = WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+	if (value < 0)
+		return;
+
+	if (value & AT803X_INTR_ENABLE_WOL)
+		wol->wolopts |= WAKE_MAGIC;
+}
+EXPORT_SYMBOL_GPL(at803x_get_wol);
+
+int at803x_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, AT803X_INTR_STATUS);
+
+	return (err < 0) ? err : 0;
+}
+EXPORT_SYMBOL_GPL(at803x_ack_interrupt);
+
+int at803x_config_intr(struct phy_device *phydev)
+{
+	int err;
+	int value;
+
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* Clear any pending interrupts */
+		err = at803x_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
+		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
+		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
+		value |= AT803X_INTR_ENABLE_LINK_FAIL;
+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
+
+		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
+	} else {
+		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
+		if (err)
+			return err;
+
+		/* Clear any pending interrupts */
+		err = at803x_ack_interrupt(phydev);
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(at803x_config_intr);
+
+irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status, int_enabled;
+
+	irq_status = phy_read(phydev, AT803X_INTR_STATUS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* Read the current enabled interrupts */
+	int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
+	if (int_enabled < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* See if this was one of our enabled interrupts */
+	if (!(irq_status & int_enabled))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(at803x_handle_interrupt);
+
+int at803x_read_specific_status(struct phy_device *phydev,
+				struct at803x_ss_mask ss_mask)
+{
+	int ss;
+
+	/* Read the AT8035 PHY-Specific Status register, which indicates the
+	 * speed and duplex that the PHY is actually using, irrespective of
+	 * whether we are in autoneg mode or not.
+	 */
+	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
+	if (ss < 0)
+		return ss;
+
+	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
+		int sfc, speed;
+
+		sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
+		if (sfc < 0)
+			return sfc;
+
+		speed = ss & ss_mask.speed_mask;
+		speed >>= ss_mask.speed_shift;
+
+		switch (speed) {
+		case AT803X_SS_SPEED_10:
+			phydev->speed = SPEED_10;
+			break;
+		case AT803X_SS_SPEED_100:
+			phydev->speed = SPEED_100;
+			break;
+		case AT803X_SS_SPEED_1000:
+			phydev->speed = SPEED_1000;
+			break;
+		case QCA808X_SS_SPEED_2500:
+			phydev->speed = SPEED_2500;
+			break;
+		}
+		if (ss & AT803X_SS_DUPLEX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+
+		if (ss & AT803X_SS_MDIX)
+			phydev->mdix = ETH_TP_MDI_X;
+		else
+			phydev->mdix = ETH_TP_MDI;
+
+		switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) {
+		case AT803X_SFC_MANUAL_MDI:
+			phydev->mdix_ctrl = ETH_TP_MDI;
+			break;
+		case AT803X_SFC_MANUAL_MDIX:
+			phydev->mdix_ctrl = ETH_TP_MDI_X;
+			break;
+		case AT803X_SFC_AUTOMATIC_CROSSOVER:
+			phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(at803x_read_specific_status);
+
+int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
+{
+	u16 val;
+
+	switch (ctrl) {
+	case ETH_TP_MDI:
+		val = AT803X_SFC_MANUAL_MDI;
+		break;
+	case ETH_TP_MDI_X:
+		val = AT803X_SFC_MANUAL_MDIX;
+		break;
+	case ETH_TP_MDI_AUTO:
+		val = AT803X_SFC_AUTOMATIC_CROSSOVER;
+		break;
+	default:
+		return 0;
+	}
+
+	return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL,
+			  AT803X_SFC_MDI_CROSSOVER_MODE_M,
+			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
+}
+EXPORT_SYMBOL_GPL(at803x_config_mdix);
+
+int at803x_prepare_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
+	if (ret < 0)
+		return ret;
+
+	/* Changes of the midx bits are disruptive to the normal operation;
+	 * therefore any changes to these registers must be followed by a
+	 * software reset to take effect.
+	 */
+	if (ret == 1) {
+		ret = genphy_soft_reset(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(at803x_prepare_config_aneg);
+
+int at803x_read_status(struct phy_device *phydev)
+{
+	struct at803x_ss_mask ss_mask = { 0 };
+	int err, old_link = phydev->link;
+
+	/* Update the link, but return if there was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	/* why bother the PHY if nothing can have changed */
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+		return 0;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	err = genphy_read_lpa(phydev);
+	if (err < 0)
+		return err;
+
+	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
+	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
+	err = at803x_read_specific_status(phydev, ss_mask);
+	if (err < 0)
+		return err;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
+		phy_resolve_aneg_pause(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(at803x_read_status);
+
+static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
+{
+	int val;
+
+	val = phy_read(phydev, AT803X_SMART_SPEED);
+	if (val < 0)
+		return val;
+
+	if (val & AT803X_SMART_SPEED_ENABLE)
+		*d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2;
+	else
+		*d = DOWNSHIFT_DEV_DISABLE;
+
+	return 0;
+}
+
+static int at803x_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+	u16 mask, set;
+	int ret;
+
+	switch (cnt) {
+	case DOWNSHIFT_DEV_DEFAULT_COUNT:
+		cnt = AT803X_DEFAULT_DOWNSHIFT;
+		fallthrough;
+	case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT:
+		set = AT803X_SMART_SPEED_ENABLE |
+		      AT803X_SMART_SPEED_BYPASS_TIMER |
+		      FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2);
+		mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK;
+		break;
+	case DOWNSHIFT_DEV_DISABLE:
+		set = 0;
+		mask = AT803X_SMART_SPEED_ENABLE |
+		       AT803X_SMART_SPEED_BYPASS_TIMER;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set);
+
+	/* After changing the smart speed settings, we need to perform a
+	 * software reset, use phy_init_hw() to make sure we set the
+	 * reapply any values which might got lost during software reset.
+	 */
+	if (ret == 1)
+		ret = phy_init_hw(phydev);
+
+	return ret;
+}
+
+int at803x_get_tunable(struct phy_device *phydev,
+		       struct ethtool_tunable *tuna, void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return at803x_get_downshift(phydev, data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+EXPORT_SYMBOL_GPL(at803x_get_tunable);
+
+int at803x_set_tunable(struct phy_device *phydev,
+		       struct ethtool_tunable *tuna, const void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return at803x_set_downshift(phydev, *(const u8 *)data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+EXPORT_SYMBOL_GPL(at803x_set_tunable);
+
+int at803x_cdt_fault_length(int dt)
+{
+	/* According to the datasheet the distance to the fault is
+	 * DELTA_TIME * 0.824 meters.
+	 *
+	 * The author suspect the correct formula is:
+	 *
+	 *   fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2
+	 *
+	 * where c is the speed of light, VF is the velocity factor of
+	 * the twisted pair cable, 125MHz the counter frequency and
+	 * we need to divide by 2 because the hardware will measure the
+	 * round trip time to the fault and back to the PHY.
+	 *
+	 * With a VF of 0.69 we get the factor 0.824 mentioned in the
+	 * datasheet.
+	 */
+	return (dt * 824) / 10;
+}
+EXPORT_SYMBOL_GPL(at803x_cdt_fault_length);
+
+int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start)
+{
+	return phy_write(phydev, AT803X_CDT, cdt_start);
+}
+EXPORT_SYMBOL_GPL(at803x_cdt_start);
+
+int at803x_cdt_wait_for_completion(struct phy_device *phydev,
+				   u32 cdt_en)
+{
+	int val, ret;
+
+	/* One test run takes about 25ms */
+	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
+				    !(val & cdt_en),
+				    30000, 100000, true);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL_GPL(at803x_cdt_wait_for_completion);
+
+static bool qca808x_cdt_fault_length_valid(int cdt_code)
+{
+	switch (cdt_code) {
+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int qca808x_cable_test_result_trans(int cdt_code)
+{
+	switch (cdt_code) {
+	case QCA808X_CDT_STATUS_STAT_NORMAL:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
+	case QCA808X_CDT_STATUS_STAT_FAIL:
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
+				    int result)
+{
+	int val;
+	u32 cdt_length_reg = 0;
+
+	switch (pair) {
+	case ETHTOOL_A_CABLE_PAIR_A:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_B:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_C:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_D:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
+	if (val < 0)
+		return val;
+
+	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
+	else
+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
+
+	return at803x_cdt_fault_length(val);
+}
+
+static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
+					      u16 status)
+{
+	int length, result;
+	u16 pair_code;
+
+	switch (pair) {
+	case ETHTOOL_A_CABLE_PAIR_A:
+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
+		break;
+	case ETHTOOL_A_CABLE_PAIR_B:
+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
+		break;
+	case ETHTOOL_A_CABLE_PAIR_C:
+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
+		break;
+	case ETHTOOL_A_CABLE_PAIR_D:
+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	result = qca808x_cable_test_result_trans(pair_code);
+	ethnl_cable_test_result(phydev, pair, result);
+
+	if (qca808x_cdt_fault_length_valid(pair_code)) {
+		length = qca808x_cdt_fault_length(phydev, pair, result);
+		ethnl_cable_test_fault_length(phydev, pair, length);
+	}
+
+	return 0;
+}
+
+int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
+{
+	int ret, val;
+
+	*finished = false;
+
+	val = QCA808X_CDT_ENABLE_TEST |
+	      QCA808X_CDT_LENGTH_UNIT;
+	ret = at803x_cdt_start(phydev, val);
+	if (ret)
+		return ret;
+
+	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
+	if (ret)
+		return ret;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
+	if (val < 0)
+		return val;
+
+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
+	if (ret)
+		return ret;
+
+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
+	if (ret)
+		return ret;
+
+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
+	if (ret)
+		return ret;
+
+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
+	if (ret)
+		return ret;
+
+	*finished = true;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca808x_cable_test_get_status);
+
+int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg)
+{
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
+				  QCA808X_LED_FORCE_EN);
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_enable);
+
+bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg)
+{
+	int val;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
+	return !(val & QCA808X_LED_FORCE_EN);
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_status);
+
+int qca808x_led_reg_brightness_set(struct phy_device *phydev,
+				   u16 reg, enum led_brightness value)
+{
+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
+			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
+			      QCA808X_LED_FORCE_EN | (value ? QCA808X_LED_FORCE_ON :
+							      QCA808X_LED_FORCE_OFF));
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_brightness_set);
+
+int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
+			      unsigned long *delay_on,
+			      unsigned long *delay_off)
+{
+	int ret;
+
+	/* Set blink to 50% off, 50% on at 4Hz by default */
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
+			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
+			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
+	if (ret)
+		return ret;
+
+	/* We use BLINK_1 for normal blinking */
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
+	if (ret)
+		return ret;
+
+	/* We set blink to 4Hz, aka 250ms */
+	*delay_on = 250 / 2;
+	*delay_off = 250 / 2;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_blink_set);
diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h
new file mode 100644
index 0000000000..4bb5417288
--- /dev/null
+++ b/drivers/net/phy/qcom/qcom.h
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
+#define AT803X_SFC_ASSERT_CRS			BIT(11)
+#define AT803X_SFC_FORCE_LINK			BIT(10)
+#define AT803X_SFC_MDI_CROSSOVER_MODE_M		GENMASK(6, 5)
+#define AT803X_SFC_AUTOMATIC_CROSSOVER		0x3
+#define AT803X_SFC_MANUAL_MDIX			0x1
+#define AT803X_SFC_MANUAL_MDI			0x0
+#define AT803X_SFC_SQE_TEST			BIT(2)
+#define AT803X_SFC_POLARITY_REVERSAL		BIT(1)
+#define AT803X_SFC_DISABLE_JABBER		BIT(0)
+
+#define AT803X_SPECIFIC_STATUS			0x11
+#define AT803X_SS_SPEED_MASK			GENMASK(15, 14)
+#define AT803X_SS_SPEED_1000			2
+#define AT803X_SS_SPEED_100			1
+#define AT803X_SS_SPEED_10			0
+#define AT803X_SS_DUPLEX			BIT(13)
+#define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
+#define AT803X_SS_MDIX				BIT(6)
+
+#define QCA808X_SS_SPEED_MASK			GENMASK(9, 7)
+#define QCA808X_SS_SPEED_2500			4
+
+#define AT803X_INTR_ENABLE			0x12
+#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
+#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
+#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
+#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
+#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
+#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
+#define AT803X_INTR_ENABLE_LINK_FAIL_BX		BIT(8)
+#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX	BIT(7)
+#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
+#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
+#define AT803X_INTR_ENABLE_WOL			BIT(0)
+
+#define AT803X_INTR_STATUS			0x13
+
+#define AT803X_SMART_SPEED			0x14
+#define AT803X_SMART_SPEED_ENABLE		BIT(5)
+#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK	GENMASK(4, 2)
+#define AT803X_SMART_SPEED_BYPASS_TIMER		BIT(1)
+
+#define AT803X_CDT				0x16
+#define AT803X_CDT_MDI_PAIR_MASK		GENMASK(9, 8)
+#define AT803X_CDT_ENABLE_TEST			BIT(0)
+#define AT803X_CDT_STATUS			0x1c
+#define AT803X_CDT_STATUS_STAT_NORMAL		0
+#define AT803X_CDT_STATUS_STAT_SHORT		1
+#define AT803X_CDT_STATUS_STAT_OPEN		2
+#define AT803X_CDT_STATUS_STAT_FAIL		3
+#define AT803X_CDT_STATUS_STAT_MASK		GENMASK(9, 8)
+#define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
+
+#define QCA808X_CDT_ENABLE_TEST			BIT(15)
+#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
+#define QCA808X_CDT_STATUS			BIT(11)
+#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
+
+#define QCA808X_MMD3_CDT_STATUS			0x8064
+#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
+#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
+#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
+#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
+
+#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
+#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
+#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
+#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
+
+#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
+#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
+#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
+
+#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
+#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
+
+/* NORMAL are MDI with type set to 0 */
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+									 QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+									 QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+									 QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+									 QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+									 QCA808X_CDT_STATUS_STAT_MDI3)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+									 QCA808X_CDT_STATUS_STAT_MDI3)
+
+/* Added for reference of existence but should be handled by wait_for_completion already */
+#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
+
+#define QCA808X_MMD7_LED_GLOBAL			0x8073
+#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
+#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
+/* Values are the same for both BLINK_1 and BLINK_2 */
+#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
+#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
+#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
+#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
+#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
+#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
+#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
+#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
+#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
+#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
+#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
+#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
+#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
+#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
+#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
+#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
+#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
+#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
+
+/* LED hw control pattern is the same for every LED */
+#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
+#define QCA808X_LED_SPEED2500_ON		BIT(15)
+#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
+/* Follow blink trigger even if duplex or speed condition doesn't match */
+#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
+#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
+#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
+#define QCA808X_LED_TX_BLINK			BIT(10)
+#define QCA808X_LED_RX_BLINK			BIT(9)
+#define QCA808X_LED_TX_ON_10MS			BIT(8)
+#define QCA808X_LED_RX_ON_10MS			BIT(7)
+#define QCA808X_LED_SPEED1000_ON		BIT(6)
+#define QCA808X_LED_SPEED100_ON			BIT(5)
+#define QCA808X_LED_SPEED10_ON			BIT(4)
+#define QCA808X_LED_COLLISION_BLINK		BIT(3)
+#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
+#define QCA808X_LED_SPEED100_BLINK		BIT(1)
+#define QCA808X_LED_SPEED10_BLINK		BIT(0)
+
+/* LED force ctrl is the same for every LED
+ * No documentation exist for this, not even internal one
+ * with NDA as QCOM gives only info about configuring
+ * hw control pattern rules and doesn't indicate any way
+ * to force the LED to specific mode.
+ * These define comes from reverse and testing and maybe
+ * lack of some info or some info are not entirely correct.
+ * For the basic LED control and hw control these finding
+ * are enough to support LED control in all the required APIs.
+ *
+ * On doing some comparison with implementation with qca807x,
+ * it was found that it's 1:1 equal to it and confirms all the
+ * reverse done. It was also found further specification with the
+ * force mode and the blink modes.
+ */
+#define QCA808X_LED_FORCE_EN			BIT(15)
+#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
+#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
+#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
+#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
+#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
+
+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
+
+#define AT803X_DEBUG_ADDR			0x1D
+#define AT803X_DEBUG_DATA			0x1E
+
+#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
+#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
+#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
+#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
+
+#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
+#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
+
+#define AT803X_DEBUG_REG_HIB_CTRL		0x0b
+#define   AT803X_DEBUG_HIB_CTRL_SEL_RST_80U	BIT(10)
+#define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
+#define   AT803X_DEBUG_HIB_CTRL_PS_HIB_EN	BIT(15)
+
+#define AT803X_DEFAULT_DOWNSHIFT		5
+#define AT803X_MIN_DOWNSHIFT			2
+#define AT803X_MAX_DOWNSHIFT			9
+
+enum stat_access_type {
+	PHY,
+	MMD
+};
+
+struct at803x_hw_stat {
+	const char *string;
+	u8 reg;
+	u32 mask;
+	enum stat_access_type access_type;
+};
+
+struct at803x_ss_mask {
+	u16 speed_mask;
+	u8 speed_shift;
+};
+
+int at803x_debug_reg_read(struct phy_device *phydev, u16 reg);
+int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
+			  u16 clear, u16 set);
+int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data);
+int at803x_set_wol(struct phy_device *phydev,
+		   struct ethtool_wolinfo *wol);
+void at803x_get_wol(struct phy_device *phydev,
+		    struct ethtool_wolinfo *wol);
+int at803x_ack_interrupt(struct phy_device *phydev);
+int at803x_config_intr(struct phy_device *phydev);
+irqreturn_t at803x_handle_interrupt(struct phy_device *phydev);
+int at803x_read_specific_status(struct phy_device *phydev,
+				struct at803x_ss_mask ss_mask);
+int at803x_config_mdix(struct phy_device *phydev, u8 ctrl);
+int at803x_prepare_config_aneg(struct phy_device *phydev);
+int at803x_read_status(struct phy_device *phydev);
+int at803x_get_tunable(struct phy_device *phydev,
+		       struct ethtool_tunable *tuna, void *data);
+int at803x_set_tunable(struct phy_device *phydev,
+		       struct ethtool_tunable *tuna, const void *data);
+int at803x_cdt_fault_length(int dt);
+int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start);
+int at803x_cdt_wait_for_completion(struct phy_device *phydev,
+				   u32 cdt_en);
+int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished);
+int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg);
+bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg);
+int qca808x_led_reg_brightness_set(struct phy_device *phydev,
+				   u16 reg, enum led_brightness value);
+int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
+			      unsigned long *delay_on,
+			      unsigned long *delay_off);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 337899c697..1fa70427b2 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -57,14 +57,6 @@
 #define RTL8366RB_POWER_SAVE			0x15
 #define RTL8366RB_POWER_SAVE_ON			BIT(12)
 
-#define RTL_SUPPORTS_5000FULL			BIT(14)
-#define RTL_SUPPORTS_2500FULL			BIT(13)
-#define RTL_SUPPORTS_10000FULL			BIT(0)
-#define RTL_ADV_2500FULL			BIT(7)
-#define RTL_LPADV_10000FULL			BIT(11)
-#define RTL_LPADV_5000FULL			BIT(6)
-#define RTL_LPADV_2500FULL			BIT(5)
-
 #define RTL9000A_GINMR				0x14
 #define RTL9000A_GINMR_LINK_STATUS		BIT(4)
 
@@ -676,11 +668,11 @@ static int rtl822x_get_features(struct phy_device *phydev)
 		return val;
 
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-			 phydev->supported, val & RTL_SUPPORTS_2500FULL);
+			 phydev->supported, val & MDIO_PMA_SPEED_2_5G);
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
-			 phydev->supported, val & RTL_SUPPORTS_5000FULL);
+			 phydev->supported, val & MDIO_PMA_SPEED_5G);
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-			 phydev->supported, val & RTL_SUPPORTS_10000FULL);
+			 phydev->supported, val & MDIO_SPEED_10G);
 
 	return genphy_read_abilities(phydev);
 }
@@ -690,14 +682,12 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
 	int ret = 0;
 
 	if (phydev->autoneg == AUTONEG_ENABLE) {
-		u16 adv2500 = 0;
-
-		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-				      phydev->advertising))
-			adv2500 = RTL_ADV_2500FULL;
+		u16 adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising);
 
 		ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
-					       RTL_ADV_2500FULL, adv2500);
+					       MDIO_AN_10GBT_CTRL_ADV2_5G |
+					       MDIO_AN_10GBT_CTRL_ADV5G,
+					       adv);
 		if (ret < 0)
 			return ret;
 	}
@@ -715,12 +705,8 @@ static int rtl822x_read_status(struct phy_device *phydev)
 		if (lpadv < 0)
 			return lpadv;
 
-		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-			phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
-		linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
-			phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
-		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-			phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
+		mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising,
+						  lpadv);
 	}
 
 	ret = genphy_read_status(phydev);
@@ -738,7 +724,7 @@ static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
 	val = phy_read(phydev, 0x13);
 	phy_write(phydev, RTL821x_PAGE_SELECT, 0);
 
-	return val >= 0 && val & RTL_SUPPORTS_2500FULL;
+	return val >= 0 && val & MDIO_PMA_SPEED_2_5G;
 }
 
 static int rtlgen_match_phy_device(struct phy_device *phydev)
@@ -1050,6 +1036,16 @@ static struct phy_driver realtek_drvs[] = {
 		.read_page      = rtl821x_read_page,
 		.write_page     = rtl821x_write_page,
 	}, {
+		PHY_ID_MATCH_EXACT(0x001cc862),
+		.name           = "RTL8251B 5Gbps PHY",
+		.get_features   = rtl822x_get_features,
+		.config_aneg    = rtl822x_config_aneg,
+		.read_status    = rtl822x_read_status,
+		.suspend        = genphy_suspend,
+		.resume         = rtlgen_resume,
+		.read_page      = rtl821x_read_page,
+		.write_page     = rtl821x_write_page,
+	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
 		.config_init	= &rtl8366rb_config_init,
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index f75c9eb395..52b71c7e78 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -385,18 +385,23 @@ static void sfp_fixup_rollball(struct sfp *sfp)
 	sfp->phy_t_retry = msecs_to_jiffies(1000);
 }
 
-static void sfp_fixup_fs_10gt(struct sfp *sfp)
+static void sfp_fixup_fs_2_5gt(struct sfp *sfp)
 {
-	sfp_fixup_10gbaset_30m(sfp);
 	sfp_fixup_rollball(sfp);
 
-	/* The RollBall fixup is not enough for FS modules, the AQR chip inside
+	/* The RollBall fixup is not enough for FS modules, the PHY chip inside
 	 * them does not return 0xffff for PHY ID registers in all MMDs for the
 	 * while initializing. They need a 4 second wait before accessing PHY.
 	 */
 	sfp->module_t_wait = msecs_to_jiffies(4000);
 }
 
+static void sfp_fixup_fs_10gt(struct sfp *sfp)
+{
+	sfp_fixup_10gbaset_30m(sfp);
+	sfp_fixup_fs_2_5gt(sfp);
+}
+
 static void sfp_fixup_halny_gsfp(struct sfp *sfp)
 {
 	/* Ignore the TX_FAULT and LOS signals on this module.
@@ -472,6 +477,10 @@ static const struct sfp_quirk sfp_quirks[] = {
 	// Rollball protocol to talk to the PHY.
 	SFP_QUIRK_F("FS", "SFP-10G-T", sfp_fixup_fs_10gt),
 
+	// Fiberstore SFP-2.5G-T uses Rollball protocol to talk to the PHY and
+	// needs 4 sec wait before probing the PHY.
+	SFP_QUIRK_F("FS", "SFP-2.5G-T", sfp_fixup_fs_2_5gt),
+
 	// Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd
 	// NRZ in their EEPROM
 	SFP_QUIRK("FS", "GPON-ONU-34-20BI", sfp_quirk_2500basex,
@@ -488,9 +497,6 @@ static const struct sfp_quirk sfp_quirks[] = {
 	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
 		  sfp_fixup_ignore_tx_fault),
 
-	// FS 2.5G Base-T
-	SFP_QUIRK_M("FS", "SFP-2.5G-T", sfp_quirk_oem_2_5g),
-
 	// Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report
 	// 2500MBd NRZ in their EEPROM
 	SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex),
@@ -502,6 +508,9 @@ static const struct sfp_quirk sfp_quirks[] = {
 	SFP_QUIRK_F("Walsun", "HXSX-ATRC-1", sfp_fixup_fs_10gt),
 	SFP_QUIRK_F("Walsun", "HXSX-ATRI-1", sfp_fixup_fs_10gt),
 
+	// OEM SFP-GE-T is a 1000Base-T module with broken TX_FAULT indicator
+	SFP_QUIRK_F("OEM", "SFP-GE-T", sfp_fixup_ignore_tx_fault),
+
 	SFP_QUIRK_F("OEM", "SFP-10G-T", sfp_fixup_rollball_cc),
 	SFP_QUIRK_M("OEM", "SFP-2.5G-T", sfp_quirk_oem_2_5g),
 	SFP_QUIRK_F("OEM", "RTSFP-10", sfp_fixup_rollball_cc),
@@ -2418,8 +2427,7 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
 
 	/* Handle remove event globally, it resets this state machine */
 	if (event == SFP_E_REMOVE) {
-		if (sfp->sm_mod_state > SFP_MOD_PROBE)
-			sfp_sm_mod_remove(sfp);
+		sfp_sm_mod_remove(sfp);
 		sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
 		return;
 	}
diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
index 7fd9fe6a60..7b1bc5fcef 100644
--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -22,7 +22,7 @@
 
 struct gmii2rgmii {
 	struct phy_device *phy_dev;
-	struct phy_driver *phy_drv;
+	const struct phy_driver *phy_drv;
 	struct phy_driver conv_phy_drv;
 	struct mdio_device *mdio;
 };