summaryrefslogtreecommitdiffstats
path: root/drivers/net/wan/farsync.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/wan/farsync.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/wan/farsync.c')
-rw-r--r--drivers/net/wan/farsync.c2596
1 files changed, 2596 insertions, 0 deletions
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
new file mode 100644
index 0000000000..5b01642ca4
--- /dev/null
+++ b/drivers/net/wan/farsync.c
@@ -0,0 +1,2596 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* FarSync WAN driver for Linux (2.6.x kernel version)
+ *
+ * Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards
+ *
+ * Copyright (C) 2001-2004 FarSite Communications Ltd.
+ * www.farsite.co.uk
+ *
+ * Author: R.J.Dunlop <bob.dunlop@farsite.co.uk>
+ * Maintainer: Kevin Curtis <kevin.curtis@farsite.co.uk>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/if.h>
+#include <linux/hdlc.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+
+#include "farsync.h"
+
+/* Module info
+ */
+MODULE_AUTHOR("R.J.Dunlop <bob.dunlop@farsite.co.uk>");
+MODULE_DESCRIPTION("FarSync T-Series WAN driver. FarSite Communications Ltd.");
+MODULE_LICENSE("GPL");
+
+/* Driver configuration and global parameters
+ * ==========================================
+ */
+
+/* Number of ports (per card) and cards supported
+ */
+#define FST_MAX_PORTS 4
+#define FST_MAX_CARDS 32
+
+/* Default parameters for the link
+ */
+#define FST_TX_QUEUE_LEN 100 /* At 8Mbps a longer queue length is
+ * useful
+ */
+#define FST_TXQ_DEPTH 16 /* This one is for the buffering
+ * of frames on the way down to the card
+ * so that we can keep the card busy
+ * and maximise throughput
+ */
+#define FST_HIGH_WATER_MARK 12 /* Point at which we flow control
+ * network layer
+ */
+#define FST_LOW_WATER_MARK 8 /* Point at which we remove flow
+ * control from network layer
+ */
+#define FST_MAX_MTU 8000 /* Huge but possible */
+#define FST_DEF_MTU 1500 /* Common sane value */
+
+#define FST_TX_TIMEOUT (2 * HZ)
+
+#ifdef ARPHRD_RAWHDLC
+#define ARPHRD_MYTYPE ARPHRD_RAWHDLC /* Raw frames */
+#else
+#define ARPHRD_MYTYPE ARPHRD_HDLC /* Cisco-HDLC (keepalives etc) */
+#endif
+
+/* Modules parameters and associated variables
+ */
+static int fst_txq_low = FST_LOW_WATER_MARK;
+static int fst_txq_high = FST_HIGH_WATER_MARK;
+static int fst_max_reads = 7;
+static int fst_excluded_cards;
+static int fst_excluded_list[FST_MAX_CARDS];
+
+module_param(fst_txq_low, int, 0);
+module_param(fst_txq_high, int, 0);
+module_param(fst_max_reads, int, 0);
+module_param(fst_excluded_cards, int, 0);
+module_param_array(fst_excluded_list, int, NULL, 0);
+
+/* Card shared memory layout
+ * =========================
+ */
+#pragma pack(1)
+
+/* This information is derived in part from the FarSite FarSync Smc.h
+ * file. Unfortunately various name clashes and the non-portability of the
+ * bit field declarations in that file have meant that I have chosen to
+ * recreate the information here.
+ *
+ * The SMC (Shared Memory Configuration) has a version number that is
+ * incremented every time there is a significant change. This number can
+ * be used to check that we have not got out of step with the firmware
+ * contained in the .CDE files.
+ */
+#define SMC_VERSION 24
+
+#define FST_MEMSIZE 0x100000 /* Size of card memory (1Mb) */
+
+#define SMC_BASE 0x00002000L /* Base offset of the shared memory window main
+ * configuration structure
+ */
+#define BFM_BASE 0x00010000L /* Base offset of the shared memory window DMA
+ * buffers
+ */
+
+#define LEN_TX_BUFFER 8192 /* Size of packet buffers */
+#define LEN_RX_BUFFER 8192
+
+#define LEN_SMALL_TX_BUFFER 256 /* Size of obsolete buffs used for DOS diags */
+#define LEN_SMALL_RX_BUFFER 256
+
+#define NUM_TX_BUFFER 2 /* Must be power of 2. Fixed by firmware */
+#define NUM_RX_BUFFER 8
+
+/* Interrupt retry time in milliseconds */
+#define INT_RETRY_TIME 2
+
+/* The Am186CH/CC processors support a SmartDMA mode using circular pools
+ * of buffer descriptors. The structure is almost identical to that used
+ * in the LANCE Ethernet controllers. Details available as PDF from the
+ * AMD web site: https://www.amd.com/products/epd/processors/\
+ * 2.16bitcont/3.am186cxfa/a21914/21914.pdf
+ */
+struct txdesc { /* Transmit descriptor */
+ volatile u16 ladr; /* Low order address of packet. This is a
+ * linear address in the Am186 memory space
+ */
+ volatile u8 hadr; /* High order address. Low 4 bits only, high 4
+ * bits must be zero
+ */
+ volatile u8 bits; /* Status and config */
+ volatile u16 bcnt; /* 2s complement of packet size in low 15 bits.
+ * Transmit terminal count interrupt enable in
+ * top bit.
+ */
+ u16 unused; /* Not used in Tx */
+};
+
+struct rxdesc { /* Receive descriptor */
+ volatile u16 ladr; /* Low order address of packet */
+ volatile u8 hadr; /* High order address */
+ volatile u8 bits; /* Status and config */
+ volatile u16 bcnt; /* 2s complement of buffer size in low 15 bits.
+ * Receive terminal count interrupt enable in
+ * top bit.
+ */
+ volatile u16 mcnt; /* Message byte count (15 bits) */
+};
+
+/* Convert a length into the 15 bit 2's complement */
+/* #define cnv_bcnt(len) (( ~(len) + 1 ) & 0x7FFF ) */
+/* Since we need to set the high bit to enable the completion interrupt this
+ * can be made a lot simpler
+ */
+#define cnv_bcnt(len) (-(len))
+
+/* Status and config bits for the above */
+#define DMA_OWN 0x80 /* SmartDMA owns the descriptor */
+#define TX_STP 0x02 /* Tx: start of packet */
+#define TX_ENP 0x01 /* Tx: end of packet */
+#define RX_ERR 0x40 /* Rx: error (OR of next 4 bits) */
+#define RX_FRAM 0x20 /* Rx: framing error */
+#define RX_OFLO 0x10 /* Rx: overflow error */
+#define RX_CRC 0x08 /* Rx: CRC error */
+#define RX_HBUF 0x04 /* Rx: buffer error */
+#define RX_STP 0x02 /* Rx: start of packet */
+#define RX_ENP 0x01 /* Rx: end of packet */
+
+/* Interrupts from the card are caused by various events which are presented
+ * in a circular buffer as several events may be processed on one physical int
+ */
+#define MAX_CIRBUFF 32
+
+struct cirbuff {
+ u8 rdindex; /* read, then increment and wrap */
+ u8 wrindex; /* write, then increment and wrap */
+ u8 evntbuff[MAX_CIRBUFF];
+};
+
+/* Interrupt event codes.
+ * Where appropriate the two low order bits indicate the port number
+ */
+#define CTLA_CHG 0x18 /* Control signal changed */
+#define CTLB_CHG 0x19
+#define CTLC_CHG 0x1A
+#define CTLD_CHG 0x1B
+
+#define INIT_CPLT 0x20 /* Initialisation complete */
+#define INIT_FAIL 0x21 /* Initialisation failed */
+
+#define ABTA_SENT 0x24 /* Abort sent */
+#define ABTB_SENT 0x25
+#define ABTC_SENT 0x26
+#define ABTD_SENT 0x27
+
+#define TXA_UNDF 0x28 /* Transmission underflow */
+#define TXB_UNDF 0x29
+#define TXC_UNDF 0x2A
+#define TXD_UNDF 0x2B
+
+#define F56_INT 0x2C
+#define M32_INT 0x2D
+
+#define TE1_ALMA 0x30
+
+/* Port physical configuration. See farsync.h for field values */
+struct port_cfg {
+ u16 lineInterface; /* Physical interface type */
+ u8 x25op; /* Unused at present */
+ u8 internalClock; /* 1 => internal clock, 0 => external */
+ u8 transparentMode; /* 1 => on, 0 => off */
+ u8 invertClock; /* 0 => normal, 1 => inverted */
+ u8 padBytes[6]; /* Padding */
+ u32 lineSpeed; /* Speed in bps */
+};
+
+/* TE1 port physical configuration */
+struct su_config {
+ u32 dataRate;
+ u8 clocking;
+ u8 framing;
+ u8 structure;
+ u8 interface;
+ u8 coding;
+ u8 lineBuildOut;
+ u8 equalizer;
+ u8 transparentMode;
+ u8 loopMode;
+ u8 range;
+ u8 txBufferMode;
+ u8 rxBufferMode;
+ u8 startingSlot;
+ u8 losThreshold;
+ u8 enableIdleCode;
+ u8 idleCode;
+ u8 spare[44];
+};
+
+/* TE1 Status */
+struct su_status {
+ u32 receiveBufferDelay;
+ u32 framingErrorCount;
+ u32 codeViolationCount;
+ u32 crcErrorCount;
+ u32 lineAttenuation;
+ u8 portStarted;
+ u8 lossOfSignal;
+ u8 receiveRemoteAlarm;
+ u8 alarmIndicationSignal;
+ u8 spare[40];
+};
+
+/* Finally sling all the above together into the shared memory structure.
+ * Sorry it's a hodge podge of arrays, structures and unused bits, it's been
+ * evolving under NT for some time so I guess we're stuck with it.
+ * The structure starts at offset SMC_BASE.
+ * See farsync.h for some field values.
+ */
+struct fst_shared {
+ /* DMA descriptor rings */
+ struct rxdesc rxDescrRing[FST_MAX_PORTS][NUM_RX_BUFFER];
+ struct txdesc txDescrRing[FST_MAX_PORTS][NUM_TX_BUFFER];
+
+ /* Obsolete small buffers */
+ u8 smallRxBuffer[FST_MAX_PORTS][NUM_RX_BUFFER][LEN_SMALL_RX_BUFFER];
+ u8 smallTxBuffer[FST_MAX_PORTS][NUM_TX_BUFFER][LEN_SMALL_TX_BUFFER];
+
+ u8 taskStatus; /* 0x00 => initialising, 0x01 => running,
+ * 0xFF => halted
+ */
+
+ u8 interruptHandshake; /* Set to 0x01 by adapter to signal interrupt,
+ * set to 0xEE by host to acknowledge interrupt
+ */
+
+ u16 smcVersion; /* Must match SMC_VERSION */
+
+ u32 smcFirmwareVersion; /* 0xIIVVRRBB where II = product ID, VV = major
+ * version, RR = revision and BB = build
+ */
+
+ u16 txa_done; /* Obsolete completion flags */
+ u16 rxa_done;
+ u16 txb_done;
+ u16 rxb_done;
+ u16 txc_done;
+ u16 rxc_done;
+ u16 txd_done;
+ u16 rxd_done;
+
+ u16 mailbox[4]; /* Diagnostics mailbox. Not used */
+
+ struct cirbuff interruptEvent; /* interrupt causes */
+
+ u32 v24IpSts[FST_MAX_PORTS]; /* V.24 control input status */
+ u32 v24OpSts[FST_MAX_PORTS]; /* V.24 control output status */
+
+ struct port_cfg portConfig[FST_MAX_PORTS];
+
+ u16 clockStatus[FST_MAX_PORTS]; /* lsb: 0=> present, 1=> absent */
+
+ u16 cableStatus; /* lsb: 0=> present, 1=> absent */
+
+ u16 txDescrIndex[FST_MAX_PORTS]; /* transmit descriptor ring index */
+ u16 rxDescrIndex[FST_MAX_PORTS]; /* receive descriptor ring index */
+
+ u16 portMailbox[FST_MAX_PORTS][2]; /* command, modifier */
+ u16 cardMailbox[4]; /* Not used */
+
+ /* Number of times the card thinks the host has
+ * missed an interrupt by not acknowledging
+ * within 2mS (I guess NT has problems)
+ */
+ u32 interruptRetryCount;
+
+ /* Driver private data used as an ID. We'll not
+ * use this as I'd rather keep such things
+ * in main memory rather than on the PCI bus
+ */
+ u32 portHandle[FST_MAX_PORTS];
+
+ /* Count of Tx underflows for stats */
+ u32 transmitBufferUnderflow[FST_MAX_PORTS];
+
+ /* Debounced V.24 control input status */
+ u32 v24DebouncedSts[FST_MAX_PORTS];
+
+ /* Adapter debounce timers. Don't touch */
+ u32 ctsTimer[FST_MAX_PORTS];
+ u32 ctsTimerRun[FST_MAX_PORTS];
+ u32 dcdTimer[FST_MAX_PORTS];
+ u32 dcdTimerRun[FST_MAX_PORTS];
+
+ u32 numberOfPorts; /* Number of ports detected at startup */
+
+ u16 _reserved[64];
+
+ u16 cardMode; /* Bit-mask to enable features:
+ * Bit 0: 1 enables LED identify mode
+ */
+
+ u16 portScheduleOffset;
+
+ struct su_config suConfig; /* TE1 Bits */
+ struct su_status suStatus;
+
+ u32 endOfSmcSignature; /* endOfSmcSignature MUST be the last member of
+ * the structure and marks the end of shared
+ * memory. Adapter code initializes it as
+ * END_SIG.
+ */
+};
+
+/* endOfSmcSignature value */
+#define END_SIG 0x12345678
+
+/* Mailbox values. (portMailbox) */
+#define NOP 0 /* No operation */
+#define ACK 1 /* Positive acknowledgement to PC driver */
+#define NAK 2 /* Negative acknowledgement to PC driver */
+#define STARTPORT 3 /* Start an HDLC port */
+#define STOPPORT 4 /* Stop an HDLC port */
+#define ABORTTX 5 /* Abort the transmitter for a port */
+#define SETV24O 6 /* Set V24 outputs */
+
+/* PLX Chip Register Offsets */
+#define CNTRL_9052 0x50 /* Control Register */
+#define CNTRL_9054 0x6c /* Control Register */
+
+#define INTCSR_9052 0x4c /* Interrupt control/status register */
+#define INTCSR_9054 0x68 /* Interrupt control/status register */
+
+/* 9054 DMA Registers */
+/* Note that we will be using DMA Channel 0 for copying rx data
+ * and Channel 1 for copying tx data
+ */
+#define DMAMODE0 0x80
+#define DMAPADR0 0x84
+#define DMALADR0 0x88
+#define DMASIZ0 0x8c
+#define DMADPR0 0x90
+#define DMAMODE1 0x94
+#define DMAPADR1 0x98
+#define DMALADR1 0x9c
+#define DMASIZ1 0xa0
+#define DMADPR1 0xa4
+#define DMACSR0 0xa8
+#define DMACSR1 0xa9
+#define DMAARB 0xac
+#define DMATHR 0xb0
+#define DMADAC0 0xb4
+#define DMADAC1 0xb8
+#define DMAMARBR 0xac
+
+#define FST_MIN_DMA_LEN 64
+#define FST_RX_DMA_INT 0x01
+#define FST_TX_DMA_INT 0x02
+#define FST_CARD_INT 0x04
+
+/* Larger buffers are positioned in memory at offset BFM_BASE */
+struct buf_window {
+ u8 txBuffer[FST_MAX_PORTS][NUM_TX_BUFFER][LEN_TX_BUFFER];
+ u8 rxBuffer[FST_MAX_PORTS][NUM_RX_BUFFER][LEN_RX_BUFFER];
+};
+
+/* Calculate offset of a buffer object within the shared memory window */
+#define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X))
+
+#pragma pack()
+
+/* Device driver private information
+ * =================================
+ */
+/* Per port (line or channel) information
+ */
+struct fst_port_info {
+ struct net_device *dev; /* Device struct - must be first */
+ struct fst_card_info *card; /* Card we're associated with */
+ int index; /* Port index on the card */
+ int hwif; /* Line hardware (lineInterface copy) */
+ int run; /* Port is running */
+ int mode; /* Normal or FarSync raw */
+ int rxpos; /* Next Rx buffer to use */
+ int txpos; /* Next Tx buffer to use */
+ int txipos; /* Next Tx buffer to check for free */
+ int start; /* Indication of start/stop to network */
+ /* A sixteen entry transmit queue
+ */
+ int txqs; /* index to get next buffer to tx */
+ int txqe; /* index to queue next packet */
+ struct sk_buff *txq[FST_TXQ_DEPTH]; /* The queue */
+ int rxqdepth;
+};
+
+/* Per card information
+ */
+struct fst_card_info {
+ char __iomem *mem; /* Card memory mapped to kernel space */
+ char __iomem *ctlmem; /* Control memory for PCI cards */
+ unsigned int phys_mem; /* Physical memory window address */
+ unsigned int phys_ctlmem; /* Physical control memory address */
+ unsigned int irq; /* Interrupt request line number */
+ unsigned int nports; /* Number of serial ports */
+ unsigned int type; /* Type index of card */
+ unsigned int state; /* State of card */
+ spinlock_t card_lock; /* Lock for SMP access */
+ unsigned short pci_conf; /* PCI card config in I/O space */
+ /* Per port info */
+ struct fst_port_info ports[FST_MAX_PORTS];
+ struct pci_dev *device; /* Information about the pci device */
+ int card_no; /* Inst of the card on the system */
+ int family; /* TxP or TxU */
+ int dmarx_in_progress;
+ int dmatx_in_progress;
+ unsigned long int_count;
+ unsigned long int_time_ave;
+ void *rx_dma_handle_host;
+ dma_addr_t rx_dma_handle_card;
+ void *tx_dma_handle_host;
+ dma_addr_t tx_dma_handle_card;
+ struct sk_buff *dma_skb_rx;
+ struct fst_port_info *dma_port_rx;
+ struct fst_port_info *dma_port_tx;
+ int dma_len_rx;
+ int dma_len_tx;
+ int dma_txpos;
+ int dma_rxpos;
+};
+
+/* Convert an HDLC device pointer into a port info pointer and similar */
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+#define port_to_dev(P) ((P)->dev)
+
+/* Shared memory window access macros
+ *
+ * We have a nice memory based structure above, which could be directly
+ * mapped on i386 but might not work on other architectures unless we use
+ * the readb,w,l and writeb,w,l macros. Unfortunately these macros take
+ * physical offsets so we have to convert. The only saving grace is that
+ * this should all collapse back to a simple indirection eventually.
+ */
+#define WIN_OFFSET(X) ((long)&(((struct fst_shared *)SMC_BASE)->X))
+
+#define FST_RDB(C, E) (readb((C)->mem + WIN_OFFSET(E)))
+#define FST_RDW(C, E) (readw((C)->mem + WIN_OFFSET(E)))
+#define FST_RDL(C, E) (readl((C)->mem + WIN_OFFSET(E)))
+
+#define FST_WRB(C, E, B) (writeb((B), (C)->mem + WIN_OFFSET(E)))
+#define FST_WRW(C, E, W) (writew((W), (C)->mem + WIN_OFFSET(E)))
+#define FST_WRL(C, E, L) (writel((L), (C)->mem + WIN_OFFSET(E)))
+
+/* Debug support
+ */
+#if FST_DEBUG
+
+static int fst_debug_mask = { FST_DEBUG };
+
+/* Most common debug activity is to print something if the corresponding bit
+ * is set in the debug mask. Note: this uses a non-ANSI extension in GCC to
+ * support variable numbers of macro parameters. The inverted if prevents us
+ * eating someone else's else clause.
+ */
+#define dbg(F, fmt, args...) \
+do { \
+ if (fst_debug_mask & (F)) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##args); \
+} while (0)
+#else
+#define dbg(F, fmt, args...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##args); \
+} while (0)
+#endif
+
+/* PCI ID lookup table
+ */
+static const struct pci_device_id fst_pci_dev_id[] = {
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T2P},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T4P},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T1U},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T2U},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T4U},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_TE1},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_TE1},
+ {0,} /* End */
+};
+
+MODULE_DEVICE_TABLE(pci, fst_pci_dev_id);
+
+/* Device Driver Work Queues
+ *
+ * So that we don't spend too much time processing events in the
+ * Interrupt Service routine, we will declare a work queue per Card
+ * and make the ISR schedule a task in the queue for later execution.
+ * In the 2.4 Kernel we used to use the immediate queue for BH's
+ * Now that they are gone, tasklets seem to be much better than work
+ * queues.
+ */
+
+static void do_bottom_half_tx(struct fst_card_info *card);
+static void do_bottom_half_rx(struct fst_card_info *card);
+static void fst_process_tx_work_q(struct tasklet_struct *unused);
+static void fst_process_int_work_q(struct tasklet_struct *unused);
+
+static DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q);
+static DECLARE_TASKLET(fst_int_task, fst_process_int_work_q);
+
+static struct fst_card_info *fst_card_array[FST_MAX_CARDS];
+static DEFINE_SPINLOCK(fst_work_q_lock);
+static u64 fst_work_txq;
+static u64 fst_work_intq;
+
+static void
+fst_q_work_item(u64 *queue, int card_index)
+{
+ unsigned long flags;
+ u64 mask;
+
+ /* Grab the queue exclusively
+ */
+ spin_lock_irqsave(&fst_work_q_lock, flags);
+
+ /* Making an entry in the queue is simply a matter of setting
+ * a bit for the card indicating that there is work to do in the
+ * bottom half for the card. Note the limitation of 64 cards.
+ * That ought to be enough
+ */
+ mask = (u64)1 << card_index;
+ *queue |= mask;
+ spin_unlock_irqrestore(&fst_work_q_lock, flags);
+}
+
+static void
+fst_process_tx_work_q(struct tasklet_struct *unused)
+{
+ unsigned long flags;
+ u64 work_txq;
+ int i;
+
+ /* Grab the queue exclusively
+ */
+ dbg(DBG_TX, "fst_process_tx_work_q\n");
+ spin_lock_irqsave(&fst_work_q_lock, flags);
+ work_txq = fst_work_txq;
+ fst_work_txq = 0;
+ spin_unlock_irqrestore(&fst_work_q_lock, flags);
+
+ /* Call the bottom half for each card with work waiting
+ */
+ for (i = 0; i < FST_MAX_CARDS; i++) {
+ if (work_txq & 0x01) {
+ if (fst_card_array[i]) {
+ dbg(DBG_TX, "Calling tx bh for card %d\n", i);
+ do_bottom_half_tx(fst_card_array[i]);
+ }
+ }
+ work_txq = work_txq >> 1;
+ }
+}
+
+static void
+fst_process_int_work_q(struct tasklet_struct *unused)
+{
+ unsigned long flags;
+ u64 work_intq;
+ int i;
+
+ /* Grab the queue exclusively
+ */
+ dbg(DBG_INTR, "fst_process_int_work_q\n");
+ spin_lock_irqsave(&fst_work_q_lock, flags);
+ work_intq = fst_work_intq;
+ fst_work_intq = 0;
+ spin_unlock_irqrestore(&fst_work_q_lock, flags);
+
+ /* Call the bottom half for each card with work waiting
+ */
+ for (i = 0; i < FST_MAX_CARDS; i++) {
+ if (work_intq & 0x01) {
+ if (fst_card_array[i]) {
+ dbg(DBG_INTR,
+ "Calling rx & tx bh for card %d\n", i);
+ do_bottom_half_rx(fst_card_array[i]);
+ do_bottom_half_tx(fst_card_array[i]);
+ }
+ }
+ work_intq = work_intq >> 1;
+ }
+}
+
+/* Card control functions
+ * ======================
+ */
+/* Place the processor in reset state
+ *
+ * Used to be a simple write to card control space but a glitch in the latest
+ * AMD Am186CH processor means that we now have to do it by asserting and de-
+ * asserting the PLX chip PCI Adapter Software Reset. Bit 30 in CNTRL register
+ * at offset 9052_CNTRL. Note the updates for the TXU.
+ */
+static inline void
+fst_cpureset(struct fst_card_info *card)
+{
+ unsigned char interrupt_line_register;
+ unsigned int regval;
+
+ if (card->family == FST_FAMILY_TXU) {
+ if (pci_read_config_byte
+ (card->device, PCI_INTERRUPT_LINE, &interrupt_line_register)) {
+ dbg(DBG_ASS,
+ "Error in reading interrupt line register\n");
+ }
+ /* Assert PLX software reset and Am186 hardware reset
+ * and then deassert the PLX software reset but 186 still in reset
+ */
+ outw(0x440f, card->pci_conf + CNTRL_9054 + 2);
+ outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
+ /* We are delaying here to allow the 9054 to reset itself
+ */
+ usleep_range(10, 20);
+ outw(0x240f, card->pci_conf + CNTRL_9054 + 2);
+ /* We are delaying here to allow the 9054 to reload its eeprom
+ */
+ usleep_range(10, 20);
+ outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
+
+ if (pci_write_config_byte
+ (card->device, PCI_INTERRUPT_LINE, interrupt_line_register)) {
+ dbg(DBG_ASS,
+ "Error in writing interrupt line register\n");
+ }
+
+ } else {
+ regval = inl(card->pci_conf + CNTRL_9052);
+
+ outl(regval | 0x40000000, card->pci_conf + CNTRL_9052);
+ outl(regval & ~0x40000000, card->pci_conf + CNTRL_9052);
+ }
+}
+
+/* Release the processor from reset
+ */
+static inline void
+fst_cpurelease(struct fst_card_info *card)
+{
+ if (card->family == FST_FAMILY_TXU) {
+ /* Force posted writes to complete
+ */
+ (void)readb(card->mem);
+
+ /* Release LRESET DO = 1
+ * Then release Local Hold, DO = 1
+ */
+ outw(0x040e, card->pci_conf + CNTRL_9054 + 2);
+ outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
+ } else {
+ (void)readb(card->ctlmem);
+ }
+}
+
+/* Clear the cards interrupt flag
+ */
+static inline void
+fst_clear_intr(struct fst_card_info *card)
+{
+ if (card->family == FST_FAMILY_TXU) {
+ (void)readb(card->ctlmem);
+ } else {
+ /* Poke the appropriate PLX chip register (same as enabling interrupts)
+ */
+ outw(0x0543, card->pci_conf + INTCSR_9052);
+ }
+}
+
+/* Enable card interrupts
+ */
+static inline void
+fst_enable_intr(struct fst_card_info *card)
+{
+ if (card->family == FST_FAMILY_TXU)
+ outl(0x0f0c0900, card->pci_conf + INTCSR_9054);
+ else
+ outw(0x0543, card->pci_conf + INTCSR_9052);
+}
+
+/* Disable card interrupts
+ */
+static inline void
+fst_disable_intr(struct fst_card_info *card)
+{
+ if (card->family == FST_FAMILY_TXU)
+ outl(0x00000000, card->pci_conf + INTCSR_9054);
+ else
+ outw(0x0000, card->pci_conf + INTCSR_9052);
+}
+
+/* Process the result of trying to pass a received frame up the stack
+ */
+static void
+fst_process_rx_status(int rx_status, char *name)
+{
+ switch (rx_status) {
+ case NET_RX_SUCCESS:
+ {
+ /* Nothing to do here
+ */
+ break;
+ }
+ case NET_RX_DROP:
+ {
+ dbg(DBG_ASS, "%s: Received packet dropped\n", name);
+ break;
+ }
+ }
+}
+
+/* Initilaise DMA for PLX 9054
+ */
+static inline void
+fst_init_dma(struct fst_card_info *card)
+{
+ /* This is only required for the PLX 9054
+ */
+ if (card->family == FST_FAMILY_TXU) {
+ pci_set_master(card->device);
+ outl(0x00020441, card->pci_conf + DMAMODE0);
+ outl(0x00020441, card->pci_conf + DMAMODE1);
+ outl(0x0, card->pci_conf + DMATHR);
+ }
+}
+
+/* Tx dma complete interrupt
+ */
+static void
+fst_tx_dma_complete(struct fst_card_info *card, struct fst_port_info *port,
+ int len, int txpos)
+{
+ struct net_device *dev = port_to_dev(port);
+
+ /* Everything is now set, just tell the card to go
+ */
+ dbg(DBG_TX, "fst_tx_dma_complete\n");
+ FST_WRB(card, txDescrRing[port->index][txpos].bits,
+ DMA_OWN | TX_STP | TX_ENP);
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += len;
+ netif_trans_update(dev);
+}
+
+/* Mark it for our own raw sockets interface
+ */
+static __be16 farsync_type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+ skb->dev = dev;
+ skb_reset_mac_header(skb);
+ skb->pkt_type = PACKET_HOST;
+ return htons(ETH_P_CUST);
+}
+
+/* Rx dma complete interrupt
+ */
+static void
+fst_rx_dma_complete(struct fst_card_info *card, struct fst_port_info *port,
+ int len, struct sk_buff *skb, int rxp)
+{
+ struct net_device *dev = port_to_dev(port);
+ int pi;
+ int rx_status;
+
+ dbg(DBG_TX, "fst_rx_dma_complete\n");
+ pi = port->index;
+ skb_put_data(skb, card->rx_dma_handle_host, len);
+
+ /* Reset buffer descriptor */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ /* Update stats */
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
+
+ /* Push upstream */
+ dbg(DBG_RX, "Pushing the frame up the stack\n");
+ if (port->mode == FST_RAW)
+ skb->protocol = farsync_type_trans(skb, dev);
+ else
+ skb->protocol = hdlc_type_trans(skb, dev);
+ rx_status = netif_rx(skb);
+ fst_process_rx_status(rx_status, port_to_dev(port)->name);
+ if (rx_status == NET_RX_DROP)
+ dev->stats.rx_dropped++;
+}
+
+/* Receive a frame through the DMA
+ */
+static inline void
+fst_rx_dma(struct fst_card_info *card, dma_addr_t dma, u32 mem, int len)
+{
+ /* This routine will setup the DMA and start it
+ */
+
+ dbg(DBG_RX, "In fst_rx_dma %x %x %d\n", (u32)dma, mem, len);
+ if (card->dmarx_in_progress)
+ dbg(DBG_ASS, "In fst_rx_dma while dma in progress\n");
+
+ outl(dma, card->pci_conf + DMAPADR0); /* Copy to here */
+ outl(mem, card->pci_conf + DMALADR0); /* from here */
+ outl(len, card->pci_conf + DMASIZ0); /* for this length */
+ outl(0x00000000c, card->pci_conf + DMADPR0); /* In this direction */
+
+ /* We use the dmarx_in_progress flag to flag the channel as busy
+ */
+ card->dmarx_in_progress = 1;
+ outb(0x03, card->pci_conf + DMACSR0); /* Start the transfer */
+}
+
+/* Send a frame through the DMA
+ */
+static inline void
+fst_tx_dma(struct fst_card_info *card, dma_addr_t dma, u32 mem, int len)
+{
+ /* This routine will setup the DMA and start it.
+ */
+
+ dbg(DBG_TX, "In fst_tx_dma %x %x %d\n", (u32)dma, mem, len);
+ if (card->dmatx_in_progress)
+ dbg(DBG_ASS, "In fst_tx_dma while dma in progress\n");
+
+ outl(dma, card->pci_conf + DMAPADR1); /* Copy from here */
+ outl(mem, card->pci_conf + DMALADR1); /* to here */
+ outl(len, card->pci_conf + DMASIZ1); /* for this length */
+ outl(0x000000004, card->pci_conf + DMADPR1); /* In this direction */
+
+ /* We use the dmatx_in_progress to flag the channel as busy
+ */
+ card->dmatx_in_progress = 1;
+ outb(0x03, card->pci_conf + DMACSR1); /* Start the transfer */
+}
+
+/* Issue a Mailbox command for a port.
+ * Note we issue them on a fire and forget basis, not expecting to see an
+ * error and not waiting for completion.
+ */
+static void
+fst_issue_cmd(struct fst_port_info *port, unsigned short cmd)
+{
+ struct fst_card_info *card;
+ unsigned short mbval;
+ unsigned long flags;
+ int safety;
+
+ card = port->card;
+ spin_lock_irqsave(&card->card_lock, flags);
+ mbval = FST_RDW(card, portMailbox[port->index][0]);
+
+ safety = 0;
+ /* Wait for any previous command to complete */
+ while (mbval > NAK) {
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ schedule_timeout_uninterruptible(1);
+ spin_lock_irqsave(&card->card_lock, flags);
+
+ if (++safety > 2000) {
+ pr_err("Mailbox safety timeout\n");
+ break;
+ }
+
+ mbval = FST_RDW(card, portMailbox[port->index][0]);
+ }
+ if (safety > 0)
+ dbg(DBG_CMD, "Mailbox clear after %d jiffies\n", safety);
+
+ if (mbval == NAK)
+ dbg(DBG_CMD, "issue_cmd: previous command was NAK'd\n");
+
+ FST_WRW(card, portMailbox[port->index][0], cmd);
+
+ if (cmd == ABORTTX || cmd == STARTPORT) {
+ port->txpos = 0;
+ port->txipos = 0;
+ port->start = 0;
+ }
+
+ spin_unlock_irqrestore(&card->card_lock, flags);
+}
+
+/* Port output signals control
+ */
+static inline void
+fst_op_raise(struct fst_port_info *port, unsigned int outputs)
+{
+ outputs |= FST_RDL(port->card, v24OpSts[port->index]);
+ FST_WRL(port->card, v24OpSts[port->index], outputs);
+
+ if (port->run)
+ fst_issue_cmd(port, SETV24O);
+}
+
+static inline void
+fst_op_lower(struct fst_port_info *port, unsigned int outputs)
+{
+ outputs = ~outputs & FST_RDL(port->card, v24OpSts[port->index]);
+ FST_WRL(port->card, v24OpSts[port->index], outputs);
+
+ if (port->run)
+ fst_issue_cmd(port, SETV24O);
+}
+
+/* Setup port Rx buffers
+ */
+static void
+fst_rx_config(struct fst_port_info *port)
+{
+ int i;
+ int pi;
+ unsigned int offset;
+ unsigned long flags;
+ struct fst_card_info *card;
+
+ pi = port->index;
+ card = port->card;
+ spin_lock_irqsave(&card->card_lock, flags);
+ for (i = 0; i < NUM_RX_BUFFER; i++) {
+ offset = BUF_OFFSET(rxBuffer[pi][i][0]);
+
+ FST_WRW(card, rxDescrRing[pi][i].ladr, (u16)offset);
+ FST_WRB(card, rxDescrRing[pi][i].hadr, (u8)(offset >> 16));
+ FST_WRW(card, rxDescrRing[pi][i].bcnt, cnv_bcnt(LEN_RX_BUFFER));
+ FST_WRW(card, rxDescrRing[pi][i].mcnt, LEN_RX_BUFFER);
+ FST_WRB(card, rxDescrRing[pi][i].bits, DMA_OWN);
+ }
+ port->rxpos = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
+}
+
+/* Setup port Tx buffers
+ */
+static void
+fst_tx_config(struct fst_port_info *port)
+{
+ int i;
+ int pi;
+ unsigned int offset;
+ unsigned long flags;
+ struct fst_card_info *card;
+
+ pi = port->index;
+ card = port->card;
+ spin_lock_irqsave(&card->card_lock, flags);
+ for (i = 0; i < NUM_TX_BUFFER; i++) {
+ offset = BUF_OFFSET(txBuffer[pi][i][0]);
+
+ FST_WRW(card, txDescrRing[pi][i].ladr, (u16)offset);
+ FST_WRB(card, txDescrRing[pi][i].hadr, (u8)(offset >> 16));
+ FST_WRW(card, txDescrRing[pi][i].bcnt, 0);
+ FST_WRB(card, txDescrRing[pi][i].bits, 0);
+ }
+ port->txpos = 0;
+ port->txipos = 0;
+ port->start = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
+}
+
+/* TE1 Alarm change interrupt event
+ */
+static void
+fst_intr_te1_alarm(struct fst_card_info *card, struct fst_port_info *port)
+{
+ u8 los;
+ u8 rra;
+ u8 ais;
+
+ los = FST_RDB(card, suStatus.lossOfSignal);
+ rra = FST_RDB(card, suStatus.receiveRemoteAlarm);
+ ais = FST_RDB(card, suStatus.alarmIndicationSignal);
+
+ if (los) {
+ /* Lost the link
+ */
+ if (netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "Net carrier off\n");
+ netif_carrier_off(port_to_dev(port));
+ }
+ } else {
+ /* Link available
+ */
+ if (!netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "Net carrier on\n");
+ netif_carrier_on(port_to_dev(port));
+ }
+ }
+
+ if (los)
+ dbg(DBG_INTR, "Assert LOS Alarm\n");
+ else
+ dbg(DBG_INTR, "De-assert LOS Alarm\n");
+ if (rra)
+ dbg(DBG_INTR, "Assert RRA Alarm\n");
+ else
+ dbg(DBG_INTR, "De-assert RRA Alarm\n");
+
+ if (ais)
+ dbg(DBG_INTR, "Assert AIS Alarm\n");
+ else
+ dbg(DBG_INTR, "De-assert AIS Alarm\n");
+}
+
+/* Control signal change interrupt event
+ */
+static void
+fst_intr_ctlchg(struct fst_card_info *card, struct fst_port_info *port)
+{
+ int signals;
+
+ signals = FST_RDL(card, v24DebouncedSts[port->index]);
+
+ if (signals & ((port->hwif == X21 || port->hwif == X21D)
+ ? IPSTS_INDICATE : IPSTS_DCD)) {
+ if (!netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "DCD active\n");
+ netif_carrier_on(port_to_dev(port));
+ }
+ } else {
+ if (netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "DCD lost\n");
+ netif_carrier_off(port_to_dev(port));
+ }
+ }
+}
+
+/* Log Rx Errors
+ */
+static void
+fst_log_rx_error(struct fst_card_info *card, struct fst_port_info *port,
+ unsigned char dmabits, int rxp, unsigned short len)
+{
+ struct net_device *dev = port_to_dev(port);
+
+ /* Increment the appropriate error counter
+ */
+ dev->stats.rx_errors++;
+ if (dmabits & RX_OFLO) {
+ dev->stats.rx_fifo_errors++;
+ dbg(DBG_ASS, "Rx fifo error on card %d port %d buffer %d\n",
+ card->card_no, port->index, rxp);
+ }
+ if (dmabits & RX_CRC) {
+ dev->stats.rx_crc_errors++;
+ dbg(DBG_ASS, "Rx crc error on card %d port %d\n",
+ card->card_no, port->index);
+ }
+ if (dmabits & RX_FRAM) {
+ dev->stats.rx_frame_errors++;
+ dbg(DBG_ASS, "Rx frame error on card %d port %d\n",
+ card->card_no, port->index);
+ }
+ if (dmabits == (RX_STP | RX_ENP)) {
+ dev->stats.rx_length_errors++;
+ dbg(DBG_ASS, "Rx length error (%d) on card %d port %d\n",
+ len, card->card_no, port->index);
+ }
+}
+
+/* Rx Error Recovery
+ */
+static void
+fst_recover_rx_error(struct fst_card_info *card, struct fst_port_info *port,
+ unsigned char dmabits, int rxp, unsigned short len)
+{
+ int i;
+ int pi;
+
+ pi = port->index;
+ /* Discard buffer descriptors until we see the start of the
+ * next frame. Note that for long frames this could be in
+ * a subsequent interrupt.
+ */
+ i = 0;
+ while ((dmabits & (DMA_OWN | RX_STP)) == 0) {
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+ rxp = (rxp + 1) % NUM_RX_BUFFER;
+ if (++i > NUM_RX_BUFFER) {
+ dbg(DBG_ASS, "intr_rx: Discarding more bufs"
+ " than we have\n");
+ break;
+ }
+ dmabits = FST_RDB(card, rxDescrRing[pi][rxp].bits);
+ dbg(DBG_ASS, "DMA Bits of next buffer was %x\n", dmabits);
+ }
+ dbg(DBG_ASS, "There were %d subsequent buffers in error\n", i);
+
+ /* Discard the terminal buffer */
+ if (!(dmabits & DMA_OWN)) {
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+ rxp = (rxp + 1) % NUM_RX_BUFFER;
+ }
+ port->rxpos = rxp;
+}
+
+/* Rx complete interrupt
+ */
+static void
+fst_intr_rx(struct fst_card_info *card, struct fst_port_info *port)
+{
+ unsigned char dmabits;
+ int pi;
+ int rxp;
+ int rx_status;
+ unsigned short len;
+ struct sk_buff *skb;
+ struct net_device *dev = port_to_dev(port);
+
+ /* Check we have a buffer to process */
+ pi = port->index;
+ rxp = port->rxpos;
+ dmabits = FST_RDB(card, rxDescrRing[pi][rxp].bits);
+ if (dmabits & DMA_OWN) {
+ dbg(DBG_RX | DBG_INTR, "intr_rx: No buffer port %d pos %d\n",
+ pi, rxp);
+ return;
+ }
+ if (card->dmarx_in_progress)
+ return;
+
+ /* Get buffer length */
+ len = FST_RDW(card, rxDescrRing[pi][rxp].mcnt);
+ /* Discard the CRC */
+ len -= 2;
+ if (len == 0) {
+ /* This seems to happen on the TE1 interface sometimes
+ * so throw the frame away and log the event.
+ */
+ pr_err("Frame received with 0 length. Card %d Port %d\n",
+ card->card_no, port->index);
+ /* Return descriptor to card */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ rxp = (rxp + 1) % NUM_RX_BUFFER;
+ port->rxpos = rxp;
+ return;
+ }
+
+ /* Check buffer length and for other errors. We insist on one packet
+ * in one buffer. This simplifies things greatly and since we've
+ * allocated 8K it shouldn't be a real world limitation
+ */
+ dbg(DBG_RX, "intr_rx: %d,%d: flags %x len %d\n", pi, rxp, dmabits, len);
+ if (dmabits != (RX_STP | RX_ENP) || len > LEN_RX_BUFFER - 2) {
+ fst_log_rx_error(card, port, dmabits, rxp, len);
+ fst_recover_rx_error(card, port, dmabits, rxp, len);
+ return;
+ }
+
+ /* Allocate SKB */
+ skb = dev_alloc_skb(len);
+ if (!skb) {
+ dbg(DBG_RX, "intr_rx: can't allocate buffer\n");
+
+ dev->stats.rx_dropped++;
+
+ /* Return descriptor to card */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ rxp = (rxp + 1) % NUM_RX_BUFFER;
+ port->rxpos = rxp;
+ return;
+ }
+
+ /* We know the length we need to receive, len.
+ * It's not worth using the DMA for reads of less than
+ * FST_MIN_DMA_LEN
+ */
+
+ if (len < FST_MIN_DMA_LEN || card->family == FST_FAMILY_TXP) {
+ memcpy_fromio(skb_put(skb, len),
+ card->mem + BUF_OFFSET(rxBuffer[pi][rxp][0]),
+ len);
+
+ /* Reset buffer descriptor */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ /* Update stats */
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
+
+ /* Push upstream */
+ dbg(DBG_RX, "Pushing frame up the stack\n");
+ if (port->mode == FST_RAW)
+ skb->protocol = farsync_type_trans(skb, dev);
+ else
+ skb->protocol = hdlc_type_trans(skb, dev);
+ rx_status = netif_rx(skb);
+ fst_process_rx_status(rx_status, port_to_dev(port)->name);
+ if (rx_status == NET_RX_DROP)
+ dev->stats.rx_dropped++;
+ } else {
+ card->dma_skb_rx = skb;
+ card->dma_port_rx = port;
+ card->dma_len_rx = len;
+ card->dma_rxpos = rxp;
+ fst_rx_dma(card, card->rx_dma_handle_card,
+ BUF_OFFSET(rxBuffer[pi][rxp][0]), len);
+ }
+ if (rxp != port->rxpos) {
+ dbg(DBG_ASS, "About to increment rxpos by more than 1\n");
+ dbg(DBG_ASS, "rxp = %d rxpos = %d\n", rxp, port->rxpos);
+ }
+ rxp = (rxp + 1) % NUM_RX_BUFFER;
+ port->rxpos = rxp;
+}
+
+/* The bottom half to the ISR
+ *
+ */
+
+static void
+do_bottom_half_tx(struct fst_card_info *card)
+{
+ struct fst_port_info *port;
+ int pi;
+ int txq_length;
+ struct sk_buff *skb;
+ unsigned long flags;
+ struct net_device *dev;
+
+ /* Find a free buffer for the transmit
+ * Step through each port on this card
+ */
+
+ dbg(DBG_TX, "do_bottom_half_tx\n");
+ for (pi = 0, port = card->ports; pi < card->nports; pi++, port++) {
+ if (!port->run)
+ continue;
+
+ dev = port_to_dev(port);
+ while (!(FST_RDB(card, txDescrRing[pi][port->txpos].bits) &
+ DMA_OWN) &&
+ !(card->dmatx_in_progress)) {
+ /* There doesn't seem to be a txdone event per-se
+ * We seem to have to deduce it, by checking the DMA_OWN
+ * bit on the next buffer we think we can use
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ txq_length = port->txqe - port->txqs;
+ if (txq_length < 0) {
+ /* This is the case where one has wrapped and the
+ * maths gives us a negative number
+ */
+ txq_length = txq_length + FST_TXQ_DEPTH;
+ }
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ if (txq_length > 0) {
+ /* There is something to send
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ skb = port->txq[port->txqs];
+ port->txqs++;
+ if (port->txqs == FST_TXQ_DEPTH)
+ port->txqs = 0;
+
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ /* copy the data and set the required indicators on the
+ * card.
+ */
+ FST_WRW(card, txDescrRing[pi][port->txpos].bcnt,
+ cnv_bcnt(skb->len));
+ if (skb->len < FST_MIN_DMA_LEN ||
+ card->family == FST_FAMILY_TXP) {
+ /* Enqueue the packet with normal io */
+ memcpy_toio(card->mem +
+ BUF_OFFSET(txBuffer[pi]
+ [port->
+ txpos][0]),
+ skb->data, skb->len);
+ FST_WRB(card,
+ txDescrRing[pi][port->txpos].
+ bits,
+ DMA_OWN | TX_STP | TX_ENP);
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+ netif_trans_update(dev);
+ } else {
+ /* Or do it through dma */
+ memcpy(card->tx_dma_handle_host,
+ skb->data, skb->len);
+ card->dma_port_tx = port;
+ card->dma_len_tx = skb->len;
+ card->dma_txpos = port->txpos;
+ fst_tx_dma(card,
+ card->tx_dma_handle_card,
+ BUF_OFFSET(txBuffer[pi]
+ [port->txpos][0]),
+ skb->len);
+ }
+ if (++port->txpos >= NUM_TX_BUFFER)
+ port->txpos = 0;
+ /* If we have flow control on, can we now release it?
+ */
+ if (port->start) {
+ if (txq_length < fst_txq_low) {
+ netif_wake_queue(port_to_dev
+ (port));
+ port->start = 0;
+ }
+ }
+ dev_kfree_skb(skb);
+ } else {
+ /* Nothing to send so break out of the while loop
+ */
+ break;
+ }
+ }
+ }
+}
+
+static void
+do_bottom_half_rx(struct fst_card_info *card)
+{
+ struct fst_port_info *port;
+ int pi;
+ int rx_count = 0;
+
+ /* Check for rx completions on all ports on this card */
+ dbg(DBG_RX, "do_bottom_half_rx\n");
+ for (pi = 0, port = card->ports; pi < card->nports; pi++, port++) {
+ if (!port->run)
+ continue;
+
+ while (!(FST_RDB(card, rxDescrRing[pi][port->rxpos].bits)
+ & DMA_OWN) && !(card->dmarx_in_progress)) {
+ if (rx_count > fst_max_reads) {
+ /* Don't spend forever in receive processing
+ * Schedule another event
+ */
+ fst_q_work_item(&fst_work_intq, card->card_no);
+ tasklet_schedule(&fst_int_task);
+ break; /* Leave the loop */
+ }
+ fst_intr_rx(card, port);
+ rx_count++;
+ }
+ }
+}
+
+/* The interrupt service routine
+ * Dev_id is our fst_card_info pointer
+ */
+static irqreturn_t
+fst_intr(int dummy, void *dev_id)
+{
+ struct fst_card_info *card = dev_id;
+ struct fst_port_info *port;
+ int rdidx; /* Event buffer indices */
+ int wridx;
+ int event; /* Actual event for processing */
+ unsigned int dma_intcsr = 0;
+ unsigned int do_card_interrupt;
+ unsigned int int_retry_count;
+
+ /* Check to see if the interrupt was for this card
+ * return if not
+ * Note that the call to clear the interrupt is important
+ */
+ dbg(DBG_INTR, "intr: %d %p\n", card->irq, card);
+ if (card->state != FST_RUNNING) {
+ pr_err("Interrupt received for card %d in a non running state (%d)\n",
+ card->card_no, card->state);
+
+ /* It is possible to really be running, i.e. we have re-loaded
+ * a running card
+ * Clear and reprime the interrupt source
+ */
+ fst_clear_intr(card);
+ return IRQ_HANDLED;
+ }
+
+ /* Clear and reprime the interrupt source */
+ fst_clear_intr(card);
+
+ /* Is the interrupt for this card (handshake == 1)
+ */
+ do_card_interrupt = 0;
+ if (FST_RDB(card, interruptHandshake) == 1) {
+ do_card_interrupt += FST_CARD_INT;
+ /* Set the software acknowledge */
+ FST_WRB(card, interruptHandshake, 0xEE);
+ }
+ if (card->family == FST_FAMILY_TXU) {
+ /* Is it a DMA Interrupt
+ */
+ dma_intcsr = inl(card->pci_conf + INTCSR_9054);
+ if (dma_intcsr & 0x00200000) {
+ /* DMA Channel 0 (Rx transfer complete)
+ */
+ dbg(DBG_RX, "DMA Rx xfer complete\n");
+ outb(0x8, card->pci_conf + DMACSR0);
+ fst_rx_dma_complete(card, card->dma_port_rx,
+ card->dma_len_rx, card->dma_skb_rx,
+ card->dma_rxpos);
+ card->dmarx_in_progress = 0;
+ do_card_interrupt += FST_RX_DMA_INT;
+ }
+ if (dma_intcsr & 0x00400000) {
+ /* DMA Channel 1 (Tx transfer complete)
+ */
+ dbg(DBG_TX, "DMA Tx xfer complete\n");
+ outb(0x8, card->pci_conf + DMACSR1);
+ fst_tx_dma_complete(card, card->dma_port_tx,
+ card->dma_len_tx, card->dma_txpos);
+ card->dmatx_in_progress = 0;
+ do_card_interrupt += FST_TX_DMA_INT;
+ }
+ }
+
+ /* Have we been missing Interrupts
+ */
+ int_retry_count = FST_RDL(card, interruptRetryCount);
+ if (int_retry_count) {
+ dbg(DBG_ASS, "Card %d int_retry_count is %d\n",
+ card->card_no, int_retry_count);
+ FST_WRL(card, interruptRetryCount, 0);
+ }
+
+ if (!do_card_interrupt)
+ return IRQ_HANDLED;
+
+ /* Scehdule the bottom half of the ISR */
+ fst_q_work_item(&fst_work_intq, card->card_no);
+ tasklet_schedule(&fst_int_task);
+
+ /* Drain the event queue */
+ rdidx = FST_RDB(card, interruptEvent.rdindex) & 0x1f;
+ wridx = FST_RDB(card, interruptEvent.wrindex) & 0x1f;
+ while (rdidx != wridx) {
+ event = FST_RDB(card, interruptEvent.evntbuff[rdidx]);
+ port = &card->ports[event & 0x03];
+
+ dbg(DBG_INTR, "Processing Interrupt event: %x\n", event);
+
+ switch (event) {
+ case TE1_ALMA:
+ dbg(DBG_INTR, "TE1 Alarm intr\n");
+ if (port->run)
+ fst_intr_te1_alarm(card, port);
+ break;
+
+ case CTLA_CHG:
+ case CTLB_CHG:
+ case CTLC_CHG:
+ case CTLD_CHG:
+ if (port->run)
+ fst_intr_ctlchg(card, port);
+ break;
+
+ case ABTA_SENT:
+ case ABTB_SENT:
+ case ABTC_SENT:
+ case ABTD_SENT:
+ dbg(DBG_TX, "Abort complete port %d\n", port->index);
+ break;
+
+ case TXA_UNDF:
+ case TXB_UNDF:
+ case TXC_UNDF:
+ case TXD_UNDF:
+ /* Difficult to see how we'd get this given that we
+ * always load up the entire packet for DMA.
+ */
+ dbg(DBG_TX, "Tx underflow port %d\n", port->index);
+ port_to_dev(port)->stats.tx_errors++;
+ port_to_dev(port)->stats.tx_fifo_errors++;
+ dbg(DBG_ASS, "Tx underflow on card %d port %d\n",
+ card->card_no, port->index);
+ break;
+
+ case INIT_CPLT:
+ dbg(DBG_INIT, "Card init OK intr\n");
+ break;
+
+ case INIT_FAIL:
+ dbg(DBG_INIT, "Card init FAILED intr\n");
+ card->state = FST_IFAILED;
+ break;
+
+ default:
+ pr_err("intr: unknown card event %d. ignored\n", event);
+ break;
+ }
+
+ /* Bump and wrap the index */
+ if (++rdidx >= MAX_CIRBUFF)
+ rdidx = 0;
+ }
+ FST_WRB(card, interruptEvent.rdindex, rdidx);
+ return IRQ_HANDLED;
+}
+
+/* Check that the shared memory configuration is one that we can handle
+ * and that some basic parameters are correct
+ */
+static void
+check_started_ok(struct fst_card_info *card)
+{
+ int i;
+
+ /* Check structure version and end marker */
+ if (FST_RDW(card, smcVersion) != SMC_VERSION) {
+ pr_err("Bad shared memory version %d expected %d\n",
+ FST_RDW(card, smcVersion), SMC_VERSION);
+ card->state = FST_BADVERSION;
+ return;
+ }
+ if (FST_RDL(card, endOfSmcSignature) != END_SIG) {
+ pr_err("Missing shared memory signature\n");
+ card->state = FST_BADVERSION;
+ return;
+ }
+ /* Firmware status flag, 0x00 = initialising, 0x01 = OK, 0xFF = fail */
+ i = FST_RDB(card, taskStatus);
+ if (i == 0x01) {
+ card->state = FST_RUNNING;
+ } else if (i == 0xFF) {
+ pr_err("Firmware initialisation failed. Card halted\n");
+ card->state = FST_HALTED;
+ return;
+ } else if (i != 0x00) {
+ pr_err("Unknown firmware status 0x%x\n", i);
+ card->state = FST_HALTED;
+ return;
+ }
+
+ /* Finally check the number of ports reported by firmware against the
+ * number we assumed at card detection. Should never happen with
+ * existing firmware etc so we just report it for the moment.
+ */
+ if (FST_RDL(card, numberOfPorts) != card->nports) {
+ pr_warn("Port count mismatch on card %d. Firmware thinks %d we say %d\n",
+ card->card_no,
+ FST_RDL(card, numberOfPorts), card->nports);
+ }
+}
+
+static int
+set_conf_from_info(struct fst_card_info *card, struct fst_port_info *port,
+ struct fstioc_info *info)
+{
+ int err;
+ unsigned char my_framing;
+
+ /* Set things according to the user set valid flags
+ * Several of the old options have been invalidated/replaced by the
+ * generic hdlc package.
+ */
+ err = 0;
+ if (info->valid & FSTVAL_PROTO) {
+ if (info->proto == FST_RAW)
+ port->mode = FST_RAW;
+ else
+ port->mode = FST_GEN_HDLC;
+ }
+
+ if (info->valid & FSTVAL_CABLE)
+ err = -EINVAL;
+
+ if (info->valid & FSTVAL_SPEED)
+ err = -EINVAL;
+
+ if (info->valid & FSTVAL_PHASE)
+ FST_WRB(card, portConfig[port->index].invertClock,
+ info->invertClock);
+ if (info->valid & FSTVAL_MODE)
+ FST_WRW(card, cardMode, info->cardMode);
+ if (info->valid & FSTVAL_TE1) {
+ FST_WRL(card, suConfig.dataRate, info->lineSpeed);
+ FST_WRB(card, suConfig.clocking, info->clockSource);
+ my_framing = FRAMING_E1;
+ if (info->framing == E1)
+ my_framing = FRAMING_E1;
+ if (info->framing == T1)
+ my_framing = FRAMING_T1;
+ if (info->framing == J1)
+ my_framing = FRAMING_J1;
+ FST_WRB(card, suConfig.framing, my_framing);
+ FST_WRB(card, suConfig.structure, info->structure);
+ FST_WRB(card, suConfig.interface, info->interface);
+ FST_WRB(card, suConfig.coding, info->coding);
+ FST_WRB(card, suConfig.lineBuildOut, info->lineBuildOut);
+ FST_WRB(card, suConfig.equalizer, info->equalizer);
+ FST_WRB(card, suConfig.transparentMode, info->transparentMode);
+ FST_WRB(card, suConfig.loopMode, info->loopMode);
+ FST_WRB(card, suConfig.range, info->range);
+ FST_WRB(card, suConfig.txBufferMode, info->txBufferMode);
+ FST_WRB(card, suConfig.rxBufferMode, info->rxBufferMode);
+ FST_WRB(card, suConfig.startingSlot, info->startingSlot);
+ FST_WRB(card, suConfig.losThreshold, info->losThreshold);
+ if (info->idleCode)
+ FST_WRB(card, suConfig.enableIdleCode, 1);
+ else
+ FST_WRB(card, suConfig.enableIdleCode, 0);
+ FST_WRB(card, suConfig.idleCode, info->idleCode);
+#if FST_DEBUG
+ if (info->valid & FSTVAL_TE1) {
+ printk("Setting TE1 data\n");
+ printk("Line Speed = %d\n", info->lineSpeed);
+ printk("Start slot = %d\n", info->startingSlot);
+ printk("Clock source = %d\n", info->clockSource);
+ printk("Framing = %d\n", my_framing);
+ printk("Structure = %d\n", info->structure);
+ printk("interface = %d\n", info->interface);
+ printk("Coding = %d\n", info->coding);
+ printk("Line build out = %d\n", info->lineBuildOut);
+ printk("Equaliser = %d\n", info->equalizer);
+ printk("Transparent mode = %d\n",
+ info->transparentMode);
+ printk("Loop mode = %d\n", info->loopMode);
+ printk("Range = %d\n", info->range);
+ printk("Tx Buffer mode = %d\n", info->txBufferMode);
+ printk("Rx Buffer mode = %d\n", info->rxBufferMode);
+ printk("LOS Threshold = %d\n", info->losThreshold);
+ printk("Idle Code = %d\n", info->idleCode);
+ }
+#endif
+ }
+#if FST_DEBUG
+ if (info->valid & FSTVAL_DEBUG)
+ fst_debug_mask = info->debug;
+#endif
+
+ return err;
+}
+
+static void
+gather_conf_info(struct fst_card_info *card, struct fst_port_info *port,
+ struct fstioc_info *info)
+{
+ int i;
+
+ memset(info, 0, sizeof(struct fstioc_info));
+
+ i = port->index;
+ info->kernelVersion = LINUX_VERSION_CODE;
+ info->nports = card->nports;
+ info->type = card->type;
+ info->state = card->state;
+ info->proto = FST_GEN_HDLC;
+ info->index = i;
+#if FST_DEBUG
+ info->debug = fst_debug_mask;
+#endif
+
+ /* Only mark information as valid if card is running.
+ * Copy the data anyway in case it is useful for diagnostics
+ */
+ info->valid = ((card->state == FST_RUNNING) ? FSTVAL_ALL : FSTVAL_CARD)
+#if FST_DEBUG
+ | FSTVAL_DEBUG
+#endif
+ ;
+
+ info->lineInterface = FST_RDW(card, portConfig[i].lineInterface);
+ info->internalClock = FST_RDB(card, portConfig[i].internalClock);
+ info->lineSpeed = FST_RDL(card, portConfig[i].lineSpeed);
+ info->invertClock = FST_RDB(card, portConfig[i].invertClock);
+ info->v24IpSts = FST_RDL(card, v24IpSts[i]);
+ info->v24OpSts = FST_RDL(card, v24OpSts[i]);
+ info->clockStatus = FST_RDW(card, clockStatus[i]);
+ info->cableStatus = FST_RDW(card, cableStatus);
+ info->cardMode = FST_RDW(card, cardMode);
+ info->smcFirmwareVersion = FST_RDL(card, smcFirmwareVersion);
+
+ /* The T2U can report cable presence for both A or B
+ * in bits 0 and 1 of cableStatus. See which port we are and
+ * do the mapping.
+ */
+ if (card->family == FST_FAMILY_TXU) {
+ if (port->index == 0) {
+ /* Port A
+ */
+ info->cableStatus = info->cableStatus & 1;
+ } else {
+ /* Port B
+ */
+ info->cableStatus = info->cableStatus >> 1;
+ info->cableStatus = info->cableStatus & 1;
+ }
+ }
+ /* Some additional bits if we are TE1
+ */
+ if (card->type == FST_TYPE_TE1) {
+ info->lineSpeed = FST_RDL(card, suConfig.dataRate);
+ info->clockSource = FST_RDB(card, suConfig.clocking);
+ info->framing = FST_RDB(card, suConfig.framing);
+ info->structure = FST_RDB(card, suConfig.structure);
+ info->interface = FST_RDB(card, suConfig.interface);
+ info->coding = FST_RDB(card, suConfig.coding);
+ info->lineBuildOut = FST_RDB(card, suConfig.lineBuildOut);
+ info->equalizer = FST_RDB(card, suConfig.equalizer);
+ info->loopMode = FST_RDB(card, suConfig.loopMode);
+ info->range = FST_RDB(card, suConfig.range);
+ info->txBufferMode = FST_RDB(card, suConfig.txBufferMode);
+ info->rxBufferMode = FST_RDB(card, suConfig.rxBufferMode);
+ info->startingSlot = FST_RDB(card, suConfig.startingSlot);
+ info->losThreshold = FST_RDB(card, suConfig.losThreshold);
+ if (FST_RDB(card, suConfig.enableIdleCode))
+ info->idleCode = FST_RDB(card, suConfig.idleCode);
+ else
+ info->idleCode = 0;
+ info->receiveBufferDelay =
+ FST_RDL(card, suStatus.receiveBufferDelay);
+ info->framingErrorCount =
+ FST_RDL(card, suStatus.framingErrorCount);
+ info->codeViolationCount =
+ FST_RDL(card, suStatus.codeViolationCount);
+ info->crcErrorCount = FST_RDL(card, suStatus.crcErrorCount);
+ info->lineAttenuation = FST_RDL(card, suStatus.lineAttenuation);
+ info->lossOfSignal = FST_RDB(card, suStatus.lossOfSignal);
+ info->receiveRemoteAlarm =
+ FST_RDB(card, suStatus.receiveRemoteAlarm);
+ info->alarmIndicationSignal =
+ FST_RDB(card, suStatus.alarmIndicationSignal);
+ }
+}
+
+static int
+fst_set_iface(struct fst_card_info *card, struct fst_port_info *port,
+ struct if_settings *ifs)
+{
+ sync_serial_settings sync;
+ int i;
+
+ if (ifs->size != sizeof(sync))
+ return -ENOMEM;
+
+ if (copy_from_user(&sync, ifs->ifs_ifsu.sync, sizeof(sync)))
+ return -EFAULT;
+
+ if (sync.loopback)
+ return -EINVAL;
+
+ i = port->index;
+
+ switch (ifs->type) {
+ case IF_IFACE_V35:
+ FST_WRW(card, portConfig[i].lineInterface, V35);
+ port->hwif = V35;
+ break;
+
+ case IF_IFACE_V24:
+ FST_WRW(card, portConfig[i].lineInterface, V24);
+ port->hwif = V24;
+ break;
+
+ case IF_IFACE_X21:
+ FST_WRW(card, portConfig[i].lineInterface, X21);
+ port->hwif = X21;
+ break;
+
+ case IF_IFACE_X21D:
+ FST_WRW(card, portConfig[i].lineInterface, X21D);
+ port->hwif = X21D;
+ break;
+
+ case IF_IFACE_T1:
+ FST_WRW(card, portConfig[i].lineInterface, T1);
+ port->hwif = T1;
+ break;
+
+ case IF_IFACE_E1:
+ FST_WRW(card, portConfig[i].lineInterface, E1);
+ port->hwif = E1;
+ break;
+
+ case IF_IFACE_SYNC_SERIAL:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ switch (sync.clock_type) {
+ case CLOCK_EXT:
+ FST_WRB(card, portConfig[i].internalClock, EXTCLK);
+ break;
+
+ case CLOCK_INT:
+ FST_WRB(card, portConfig[i].internalClock, INTCLK);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ FST_WRL(card, portConfig[i].lineSpeed, sync.clock_rate);
+ return 0;
+}
+
+static int
+fst_get_iface(struct fst_card_info *card, struct fst_port_info *port,
+ struct if_settings *ifs)
+{
+ sync_serial_settings sync;
+ int i;
+
+ /* First check what line type is set, we'll default to reporting X.21
+ * if nothing is set as IF_IFACE_SYNC_SERIAL implies it can't be
+ * changed
+ */
+ switch (port->hwif) {
+ case E1:
+ ifs->type = IF_IFACE_E1;
+ break;
+ case T1:
+ ifs->type = IF_IFACE_T1;
+ break;
+ case V35:
+ ifs->type = IF_IFACE_V35;
+ break;
+ case V24:
+ ifs->type = IF_IFACE_V24;
+ break;
+ case X21D:
+ ifs->type = IF_IFACE_X21D;
+ break;
+ case X21:
+ default:
+ ifs->type = IF_IFACE_X21;
+ break;
+ }
+ if (!ifs->size)
+ return 0; /* only type requested */
+
+ if (ifs->size < sizeof(sync))
+ return -ENOMEM;
+
+ i = port->index;
+ memset(&sync, 0, sizeof(sync));
+ sync.clock_rate = FST_RDL(card, portConfig[i].lineSpeed);
+ /* Lucky card and linux use same encoding here */
+ sync.clock_type = FST_RDB(card, portConfig[i].internalClock) ==
+ INTCLK ? CLOCK_INT : CLOCK_EXT;
+ sync.loopback = 0;
+
+ if (copy_to_user(ifs->ifs_ifsu.sync, &sync, sizeof(sync)))
+ return -EFAULT;
+
+ ifs->size = sizeof(sync);
+ return 0;
+}
+
+static int
+fst_siocdevprivate(struct net_device *dev, struct ifreq *ifr, void __user *data, int cmd)
+{
+ struct fst_card_info *card;
+ struct fst_port_info *port;
+ struct fstioc_write wrthdr;
+ struct fstioc_info info;
+ unsigned long flags;
+ void *buf;
+
+ dbg(DBG_IOCTL, "ioctl: %x, %p\n", cmd, data);
+
+ port = dev_to_port(dev);
+ card = port->card;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ switch (cmd) {
+ case FSTCPURESET:
+ fst_cpureset(card);
+ card->state = FST_RESET;
+ return 0;
+
+ case FSTCPURELEASE:
+ fst_cpurelease(card);
+ card->state = FST_STARTING;
+ return 0;
+
+ case FSTWRITE: /* Code write (download) */
+
+ /* First copy in the header with the length and offset of data
+ * to write
+ */
+ if (!data)
+ return -EINVAL;
+
+ if (copy_from_user(&wrthdr, data, sizeof(struct fstioc_write)))
+ return -EFAULT;
+
+ /* Sanity check the parameters. We don't support partial writes
+ * when going over the top
+ */
+ if (wrthdr.size > FST_MEMSIZE || wrthdr.offset > FST_MEMSIZE ||
+ wrthdr.size + wrthdr.offset > FST_MEMSIZE)
+ return -ENXIO;
+
+ /* Now copy the data to the card. */
+
+ buf = memdup_user(data + sizeof(struct fstioc_write),
+ wrthdr.size);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ memcpy_toio(card->mem + wrthdr.offset, buf, wrthdr.size);
+ kfree(buf);
+
+ /* Writes to the memory of a card in the reset state constitute
+ * a download
+ */
+ if (card->state == FST_RESET)
+ card->state = FST_DOWNLOAD;
+
+ return 0;
+
+ case FSTGETCONF:
+
+ /* If card has just been started check the shared memory config
+ * version and marker
+ */
+ if (card->state == FST_STARTING) {
+ check_started_ok(card);
+
+ /* If everything checked out enable card interrupts */
+ if (card->state == FST_RUNNING) {
+ spin_lock_irqsave(&card->card_lock, flags);
+ fst_enable_intr(card);
+ FST_WRB(card, interruptHandshake, 0xEE);
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ }
+ }
+
+ if (!data)
+ return -EINVAL;
+
+ gather_conf_info(card, port, &info);
+
+ if (copy_to_user(data, &info, sizeof(info)))
+ return -EFAULT;
+
+ return 0;
+
+ case FSTSETCONF:
+ /* Most of the settings have been moved to the generic ioctls
+ * this just covers debug and board ident now
+ */
+
+ if (card->state != FST_RUNNING) {
+ pr_err("Attempt to configure card %d in non-running state (%d)\n",
+ card->card_no, card->state);
+ return -EIO;
+ }
+ if (copy_from_user(&info, data, sizeof(info)))
+ return -EFAULT;
+
+ return set_conf_from_info(card, port, &info);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int
+fst_ioctl(struct net_device *dev, struct if_settings *ifs)
+{
+ struct fst_card_info *card;
+ struct fst_port_info *port;
+
+ dbg(DBG_IOCTL, "SIOCDEVPRIVATE, %x\n", ifs->type);
+
+ port = dev_to_port(dev);
+ card = port->card;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ switch (ifs->type) {
+ case IF_GET_IFACE:
+ return fst_get_iface(card, port, ifs);
+
+ case IF_IFACE_SYNC_SERIAL:
+ case IF_IFACE_V35:
+ case IF_IFACE_V24:
+ case IF_IFACE_X21:
+ case IF_IFACE_X21D:
+ case IF_IFACE_T1:
+ case IF_IFACE_E1:
+ return fst_set_iface(card, port, ifs);
+
+ case IF_PROTO_RAW:
+ port->mode = FST_RAW;
+ return 0;
+
+ case IF_GET_PROTO:
+ if (port->mode == FST_RAW) {
+ ifs->type = IF_PROTO_RAW;
+ return 0;
+ }
+ return hdlc_ioctl(dev, ifs);
+
+ default:
+ port->mode = FST_GEN_HDLC;
+ dbg(DBG_IOCTL, "Passing this type to hdlc %x\n",
+ ifs->type);
+ return hdlc_ioctl(dev, ifs);
+ }
+}
+
+static void
+fst_openport(struct fst_port_info *port)
+{
+ int signals;
+
+ /* Only init things if card is actually running. This allows open to
+ * succeed for downloads etc.
+ */
+ if (port->card->state == FST_RUNNING) {
+ if (port->run) {
+ dbg(DBG_OPEN, "open: found port already running\n");
+
+ fst_issue_cmd(port, STOPPORT);
+ port->run = 0;
+ }
+
+ fst_rx_config(port);
+ fst_tx_config(port);
+ fst_op_raise(port, OPSTS_RTS | OPSTS_DTR);
+
+ fst_issue_cmd(port, STARTPORT);
+ port->run = 1;
+
+ signals = FST_RDL(port->card, v24DebouncedSts[port->index]);
+ if (signals & ((port->hwif == X21 || port->hwif == X21D)
+ ? IPSTS_INDICATE : IPSTS_DCD))
+ netif_carrier_on(port_to_dev(port));
+ else
+ netif_carrier_off(port_to_dev(port));
+
+ port->txqe = 0;
+ port->txqs = 0;
+ }
+}
+
+static void
+fst_closeport(struct fst_port_info *port)
+{
+ if (port->card->state == FST_RUNNING) {
+ if (port->run) {
+ port->run = 0;
+ fst_op_lower(port, OPSTS_RTS | OPSTS_DTR);
+
+ fst_issue_cmd(port, STOPPORT);
+ } else {
+ dbg(DBG_OPEN, "close: port not running\n");
+ }
+ }
+}
+
+static int
+fst_open(struct net_device *dev)
+{
+ int err;
+ struct fst_port_info *port;
+
+ port = dev_to_port(dev);
+ if (!try_module_get(THIS_MODULE))
+ return -EBUSY;
+
+ if (port->mode != FST_RAW) {
+ err = hdlc_open(dev);
+ if (err) {
+ module_put(THIS_MODULE);
+ return err;
+ }
+ }
+
+ fst_openport(port);
+ netif_wake_queue(dev);
+ return 0;
+}
+
+static int
+fst_close(struct net_device *dev)
+{
+ struct fst_port_info *port;
+ struct fst_card_info *card;
+ unsigned char tx_dma_done;
+ unsigned char rx_dma_done;
+
+ port = dev_to_port(dev);
+ card = port->card;
+
+ tx_dma_done = inb(card->pci_conf + DMACSR1);
+ rx_dma_done = inb(card->pci_conf + DMACSR0);
+ dbg(DBG_OPEN,
+ "Port Close: tx_dma_in_progress = %d (%x) rx_dma_in_progress = %d (%x)\n",
+ card->dmatx_in_progress, tx_dma_done, card->dmarx_in_progress,
+ rx_dma_done);
+
+ netif_stop_queue(dev);
+ fst_closeport(dev_to_port(dev));
+ if (port->mode != FST_RAW)
+ hdlc_close(dev);
+
+ module_put(THIS_MODULE);
+ return 0;
+}
+
+static int
+fst_attach(struct net_device *dev, unsigned short encoding, unsigned short parity)
+{
+ /* Setting currently fixed in FarSync card so we check and forget
+ */
+ if (encoding != ENCODING_NRZ || parity != PARITY_CRC16_PR1_CCITT)
+ return -EINVAL;
+ return 0;
+}
+
+static void
+fst_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+ struct fst_port_info *port;
+ struct fst_card_info *card;
+
+ port = dev_to_port(dev);
+ card = port->card;
+ dev->stats.tx_errors++;
+ dev->stats.tx_aborted_errors++;
+ dbg(DBG_ASS, "Tx timeout card %d port %d\n",
+ card->card_no, port->index);
+ fst_issue_cmd(port, ABORTTX);
+
+ netif_trans_update(dev);
+ netif_wake_queue(dev);
+ port->start = 0;
+}
+
+static netdev_tx_t
+fst_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fst_card_info *card;
+ struct fst_port_info *port;
+ unsigned long flags;
+ int txq_length;
+
+ port = dev_to_port(dev);
+ card = port->card;
+ dbg(DBG_TX, "fst_start_xmit: length = %d\n", skb->len);
+
+ /* Drop packet with error if we don't have carrier */
+ if (!netif_carrier_ok(dev)) {
+ dev_kfree_skb(skb);
+ dev->stats.tx_errors++;
+ dev->stats.tx_carrier_errors++;
+ dbg(DBG_ASS,
+ "Tried to transmit but no carrier on card %d port %d\n",
+ card->card_no, port->index);
+ return NETDEV_TX_OK;
+ }
+
+ /* Drop it if it's too big! MTU failure ? */
+ if (skb->len > LEN_TX_BUFFER) {
+ dbg(DBG_ASS, "Packet too large %d vs %d\n", skb->len,
+ LEN_TX_BUFFER);
+ dev_kfree_skb(skb);
+ dev->stats.tx_errors++;
+ return NETDEV_TX_OK;
+ }
+
+ /* We are always going to queue the packet
+ * so that the bottom half is the only place we tx from
+ * Check there is room in the port txq
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ txq_length = port->txqe - port->txqs;
+ if (txq_length < 0) {
+ /* This is the case where the next free has wrapped but the
+ * last used hasn't
+ */
+ txq_length = txq_length + FST_TXQ_DEPTH;
+ }
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ if (txq_length > fst_txq_high) {
+ /* We have got enough buffers in the pipeline. Ask the network
+ * layer to stop sending frames down
+ */
+ netif_stop_queue(dev);
+ port->start = 1; /* I'm using this to signal stop sent up */
+ }
+
+ if (txq_length == FST_TXQ_DEPTH - 1) {
+ /* This shouldn't have happened but such is life
+ */
+ dev_kfree_skb(skb);
+ dev->stats.tx_errors++;
+ dbg(DBG_ASS, "Tx queue overflow card %d port %d\n",
+ card->card_no, port->index);
+ return NETDEV_TX_OK;
+ }
+
+ /* queue the buffer
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ port->txq[port->txqe] = skb;
+ port->txqe++;
+ if (port->txqe == FST_TXQ_DEPTH)
+ port->txqe = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
+
+ /* Scehdule the bottom half which now does transmit processing */
+ fst_q_work_item(&fst_work_txq, card->card_no);
+ tasklet_schedule(&fst_tx_task);
+
+ return NETDEV_TX_OK;
+}
+
+/* Card setup having checked hardware resources.
+ * Should be pretty bizarre if we get an error here (kernel memory
+ * exhaustion is one possibility). If we do see a problem we report it
+ * via a printk and leave the corresponding interface and all that follow
+ * disabled.
+ */
+static char *type_strings[] = {
+ "no hardware", /* Should never be seen */
+ "FarSync T2P",
+ "FarSync T4P",
+ "FarSync T1U",
+ "FarSync T2U",
+ "FarSync T4U",
+ "FarSync TE1"
+};
+
+static int
+fst_init_card(struct fst_card_info *card)
+{
+ int i;
+ int err;
+
+ /* We're working on a number of ports based on the card ID. If the
+ * firmware detects something different later (should never happen)
+ * we'll have to revise it in some way then.
+ */
+ for (i = 0; i < card->nports; i++) {
+ err = register_hdlc_device(card->ports[i].dev);
+ if (err < 0) {
+ pr_err("Cannot register HDLC device for port %d (errno %d)\n",
+ i, -err);
+ while (i--)
+ unregister_hdlc_device(card->ports[i].dev);
+ return err;
+ }
+ }
+
+ pr_info("%s-%s: %s IRQ%d, %d ports\n",
+ port_to_dev(&card->ports[0])->name,
+ port_to_dev(&card->ports[card->nports - 1])->name,
+ type_strings[card->type], card->irq, card->nports);
+ return 0;
+}
+
+static const struct net_device_ops fst_ops = {
+ .ndo_open = fst_open,
+ .ndo_stop = fst_close,
+ .ndo_start_xmit = hdlc_start_xmit,
+ .ndo_siocwandev = fst_ioctl,
+ .ndo_siocdevprivate = fst_siocdevprivate,
+ .ndo_tx_timeout = fst_tx_timeout,
+};
+
+/* Initialise card when detected.
+ * Returns 0 to indicate success, or errno otherwise.
+ */
+static int
+fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int no_of_cards_added;
+ struct fst_card_info *card;
+ int err = 0;
+ int i;
+
+ printk_once(KERN_INFO
+ pr_fmt("FarSync WAN driver " FST_USER_VERSION
+ " (c) 2001-2004 FarSite Communications Ltd.\n"));
+#if FST_DEBUG
+ dbg(DBG_ASS, "The value of debug mask is %x\n", fst_debug_mask);
+#endif
+ /* We are going to be clever and allow certain cards not to be
+ * configured. An exclude list can be provided in /etc/modules.conf
+ */
+ if (fst_excluded_cards != 0) {
+ /* There are cards to exclude
+ *
+ */
+ for (i = 0; i < fst_excluded_cards; i++) {
+ if (pdev->devfn >> 3 == fst_excluded_list[i]) {
+ pr_info("FarSync PCI device %d not assigned\n",
+ (pdev->devfn) >> 3);
+ return -EBUSY;
+ }
+ }
+ }
+
+ /* Allocate driver private data */
+ card = kzalloc(sizeof(struct fst_card_info), GFP_KERNEL);
+ if (!card)
+ return -ENOMEM;
+
+ /* Try to enable the device */
+ err = pci_enable_device(pdev);
+ if (err) {
+ pr_err("Failed to enable card. Err %d\n", -err);
+ goto enable_fail;
+ }
+
+ err = pci_request_regions(pdev, "FarSync");
+ if (err) {
+ pr_err("Failed to allocate regions. Err %d\n", -err);
+ goto regions_fail;
+ }
+
+ /* Get virtual addresses of memory regions */
+ card->pci_conf = pci_resource_start(pdev, 1);
+ card->phys_mem = pci_resource_start(pdev, 2);
+ card->phys_ctlmem = pci_resource_start(pdev, 3);
+ card->mem = ioremap(card->phys_mem, FST_MEMSIZE);
+ if (!card->mem) {
+ pr_err("Physical memory remap failed\n");
+ err = -ENODEV;
+ goto ioremap_physmem_fail;
+ }
+ card->ctlmem = ioremap(card->phys_ctlmem, 0x10);
+ if (!card->ctlmem) {
+ pr_err("Control memory remap failed\n");
+ err = -ENODEV;
+ goto ioremap_ctlmem_fail;
+ }
+ dbg(DBG_PCI, "kernel mem %p, ctlmem %p\n", card->mem, card->ctlmem);
+
+ /* Register the interrupt handler */
+ if (request_irq(pdev->irq, fst_intr, IRQF_SHARED, FST_DEV_NAME, card)) {
+ pr_err("Unable to register interrupt %d\n", card->irq);
+ err = -ENODEV;
+ goto irq_fail;
+ }
+
+ /* Record info we need */
+ card->irq = pdev->irq;
+ card->type = ent->driver_data;
+ card->family = ((ent->driver_data == FST_TYPE_T2P) ||
+ (ent->driver_data == FST_TYPE_T4P))
+ ? FST_FAMILY_TXP : FST_FAMILY_TXU;
+ if (ent->driver_data == FST_TYPE_T1U ||
+ ent->driver_data == FST_TYPE_TE1)
+ card->nports = 1;
+ else
+ card->nports = ((ent->driver_data == FST_TYPE_T2P) ||
+ (ent->driver_data == FST_TYPE_T2U)) ? 2 : 4;
+
+ card->state = FST_UNINIT;
+ spin_lock_init(&card->card_lock);
+
+ for (i = 0; i < card->nports; i++) {
+ struct net_device *dev = alloc_hdlcdev(&card->ports[i]);
+ hdlc_device *hdlc;
+
+ if (!dev) {
+ while (i--)
+ free_netdev(card->ports[i].dev);
+ pr_err("FarSync: out of memory\n");
+ err = -ENOMEM;
+ goto hdlcdev_fail;
+ }
+ card->ports[i].dev = dev;
+ card->ports[i].card = card;
+ card->ports[i].index = i;
+ card->ports[i].run = 0;
+
+ hdlc = dev_to_hdlc(dev);
+
+ /* Fill in the net device info */
+ /* Since this is a PCI setup this is purely
+ * informational. Give them the buffer addresses
+ * and basic card I/O.
+ */
+ dev->mem_start = card->phys_mem
+ + BUF_OFFSET(txBuffer[i][0][0]);
+ dev->mem_end = card->phys_mem
+ + BUF_OFFSET(txBuffer[i][NUM_TX_BUFFER - 1][LEN_RX_BUFFER - 1]);
+ dev->base_addr = card->pci_conf;
+ dev->irq = card->irq;
+
+ dev->netdev_ops = &fst_ops;
+ dev->tx_queue_len = FST_TX_QUEUE_LEN;
+ dev->watchdog_timeo = FST_TX_TIMEOUT;
+ hdlc->attach = fst_attach;
+ hdlc->xmit = fst_start_xmit;
+ }
+
+ card->device = pdev;
+
+ dbg(DBG_PCI, "type %d nports %d irq %d\n", card->type,
+ card->nports, card->irq);
+ dbg(DBG_PCI, "conf %04x mem %08x ctlmem %08x\n",
+ card->pci_conf, card->phys_mem, card->phys_ctlmem);
+
+ /* Reset the card's processor */
+ fst_cpureset(card);
+ card->state = FST_RESET;
+
+ /* Initialise DMA (if required) */
+ fst_init_dma(card);
+
+ /* Record driver data for later use */
+ pci_set_drvdata(pdev, card);
+
+ /* Remainder of card setup */
+ if (no_of_cards_added >= FST_MAX_CARDS) {
+ pr_err("FarSync: too many cards\n");
+ err = -ENOMEM;
+ goto card_array_fail;
+ }
+ fst_card_array[no_of_cards_added] = card;
+ card->card_no = no_of_cards_added++; /* Record instance and bump it */
+ err = fst_init_card(card);
+ if (err)
+ goto init_card_fail;
+ if (card->family == FST_FAMILY_TXU) {
+ /* Allocate a dma buffer for transmit and receives
+ */
+ card->rx_dma_handle_host =
+ dma_alloc_coherent(&card->device->dev, FST_MAX_MTU,
+ &card->rx_dma_handle_card, GFP_KERNEL);
+ if (!card->rx_dma_handle_host) {
+ pr_err("Could not allocate rx dma buffer\n");
+ err = -ENOMEM;
+ goto rx_dma_fail;
+ }
+ card->tx_dma_handle_host =
+ dma_alloc_coherent(&card->device->dev, FST_MAX_MTU,
+ &card->tx_dma_handle_card, GFP_KERNEL);
+ if (!card->tx_dma_handle_host) {
+ pr_err("Could not allocate tx dma buffer\n");
+ err = -ENOMEM;
+ goto tx_dma_fail;
+ }
+ }
+ return 0; /* Success */
+
+tx_dma_fail:
+ dma_free_coherent(&card->device->dev, FST_MAX_MTU,
+ card->rx_dma_handle_host, card->rx_dma_handle_card);
+rx_dma_fail:
+ fst_disable_intr(card);
+ for (i = 0 ; i < card->nports ; i++)
+ unregister_hdlc_device(card->ports[i].dev);
+init_card_fail:
+ fst_card_array[card->card_no] = NULL;
+card_array_fail:
+ for (i = 0 ; i < card->nports ; i++)
+ free_netdev(card->ports[i].dev);
+hdlcdev_fail:
+ free_irq(card->irq, card);
+irq_fail:
+ iounmap(card->ctlmem);
+ioremap_ctlmem_fail:
+ iounmap(card->mem);
+ioremap_physmem_fail:
+ pci_release_regions(pdev);
+regions_fail:
+ pci_disable_device(pdev);
+enable_fail:
+ kfree(card);
+ return err;
+}
+
+/* Cleanup and close down a card
+ */
+static void
+fst_remove_one(struct pci_dev *pdev)
+{
+ struct fst_card_info *card;
+ int i;
+
+ card = pci_get_drvdata(pdev);
+
+ for (i = 0; i < card->nports; i++) {
+ struct net_device *dev = port_to_dev(&card->ports[i]);
+
+ unregister_hdlc_device(dev);
+ free_netdev(dev);
+ }
+
+ fst_disable_intr(card);
+ free_irq(card->irq, card);
+
+ iounmap(card->ctlmem);
+ iounmap(card->mem);
+ pci_release_regions(pdev);
+ if (card->family == FST_FAMILY_TXU) {
+ /* Free dma buffers
+ */
+ dma_free_coherent(&card->device->dev, FST_MAX_MTU,
+ card->rx_dma_handle_host,
+ card->rx_dma_handle_card);
+ dma_free_coherent(&card->device->dev, FST_MAX_MTU,
+ card->tx_dma_handle_host,
+ card->tx_dma_handle_card);
+ }
+ fst_card_array[card->card_no] = NULL;
+ kfree(card);
+}
+
+static struct pci_driver fst_driver = {
+ .name = FST_NAME,
+ .id_table = fst_pci_dev_id,
+ .probe = fst_add_one,
+ .remove = fst_remove_one,
+};
+
+static int __init
+fst_init(void)
+{
+ int i;
+
+ for (i = 0; i < FST_MAX_CARDS; i++)
+ fst_card_array[i] = NULL;
+ return pci_register_driver(&fst_driver);
+}
+
+static void __exit
+fst_cleanup_module(void)
+{
+ pr_info("FarSync WAN driver unloading\n");
+ pci_unregister_driver(&fst_driver);
+}
+
+module_init(fst_init);
+module_exit(fst_cleanup_module);