Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 8051 insertions, 0 deletions

diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
new file mode 100644
index 0000000000..bafdd57b04
--- /dev/null
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config WLAN_VENDOR_ATMEL
+	bool "Atmel devices"
+	default y
+	help
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all the
+	  questions about these cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if WLAN_VENDOR_ATMEL
+
+config ATMEL
+	tristate "Atmel at76c50x chipset  802.11b support"
+	depends on CFG80211 && (PCI || PCMCIA) && HAS_IOPORT
+	select WIRELESS_EXT
+	select WEXT_PRIV
+	select FW_LOADER
+	select CRC32
+	help
+	  A driver 802.11b wireless cards based on the Atmel fast-vnet
+	  chips. This driver supports standard Linux wireless extensions.
+
+	  Many  cards based on this chipset do not have flash memory
+	  and need their firmware loaded at start-up. If yours is
+	  one of these, you will need to provide a firmware image
+	  to be loaded into the card by the driver. The Atmel
+	  firmware package can be downloaded from
+	  <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+	tristate "Atmel at76c506 PCI cards"
+	depends on ATMEL && PCI
+	help
+	  Enable support for PCI and mini-PCI cards containing the
+	  Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+	tristate "Atmel at76c502/at76c504 PCMCIA cards"
+	depends on ATMEL && PCMCIA
+	select WIRELESS_EXT
+	select FW_LOADER
+	select CRC32
+	help
+	  Enable support for PCMCIA cards containing the
+	  Atmel at76c502 and at76c504 chips.
+
+config AT76C50X_USB
+	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+	depends on MAC80211 && USB
+	select FW_LOADER
+	help
+	  Enable support for USB Wireless devices using Atmel at76c503,
+	  at76c505 or at76c505a chips.
+
+endif # WLAN_VENDOR_ATMEL
diff --git a/drivers/net/wireless/atmel/Makefile b/drivers/net/wireless/atmel/Makefile
new file mode 100644
index 0000000000..17e6280567
--- /dev/null
+++ b/drivers/net/wireless/atmel/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ATMEL)             += atmel.o
+obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
+obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
+
+obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o
diff --git a/drivers/net/wireless/atmel/at76c50x-usb.c b/drivers/net/wireless/atmel/at76c50x-usb.c
new file mode 100644
index 0000000000..447b51cff8
--- /dev/null
+++ b/drivers/net/wireless/atmel/at76c50x-usb.c
@@ -0,0 +1,2613 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at76c503/at76c505 USB driver
+ *
+ * Copyright (c) 2002 - 2003 Oliver Kurth
+ * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de>
+ * Copyright (c) 2004 Nick Jones
+ * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
+ * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
+ * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi>
+ * Copyright (c) 2010 Sebastian Smolorz <sesmo@gmx.net>
+ *
+ * This file is part of the Berlios driver for USB WLAN devices based on the
+ * Atmel AT76C503A/505/505A.
+ *
+ * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
+ *
+ * TODO list is at the wiki:
+ *
+ * https://wireless.wiki.kernel.org/en/users/Drivers/at76c50x-usb#TODO
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <net/ieee80211_radiotap.h>
+#include <linux/firmware.h>
+#include <linux/leds.h>
+#include <net/mac80211.h>
+
+#include "at76c50x-usb.h"
+
+/* Version information */
+#define DRIVER_NAME "at76c50x-usb"
+#define DRIVER_VERSION	"0.17"
+#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
+
+/* at76_debug bits */
+#define DBG_PROGRESS		0x00000001	/* authentication/accociation */
+#define DBG_BSS_TABLE		0x00000002	/* show BSS table after scans */
+#define DBG_IOCTL		0x00000004	/* ioctl calls / settings */
+#define DBG_MAC_STATE		0x00000008	/* MAC state transitions */
+#define DBG_TX_DATA		0x00000010	/* tx header */
+#define DBG_TX_DATA_CONTENT	0x00000020	/* tx content */
+#define DBG_TX_MGMT		0x00000040	/* tx management */
+#define DBG_RX_DATA		0x00000080	/* rx data header */
+#define DBG_RX_DATA_CONTENT	0x00000100	/* rx data content */
+#define DBG_RX_MGMT		0x00000200	/* rx mgmt frame headers */
+#define DBG_RX_BEACON		0x00000400	/* rx beacon */
+#define DBG_RX_CTRL		0x00000800	/* rx control */
+#define DBG_RX_MGMT_CONTENT	0x00001000	/* rx mgmt content */
+#define DBG_RX_FRAGS		0x00002000	/* rx data fragment handling */
+#define DBG_DEVSTART		0x00004000	/* fw download, device start */
+#define DBG_URB			0x00008000	/* rx urb status, ... */
+#define DBG_RX_ATMEL_HDR	0x00010000	/* Atmel-specific Rx headers */
+#define DBG_PROC_ENTRY		0x00020000	/* procedure entries/exits */
+#define DBG_PM			0x00040000	/* power management settings */
+#define DBG_BSS_MATCH		0x00080000	/* BSS match failures */
+#define DBG_PARAMS		0x00100000	/* show configured parameters */
+#define DBG_WAIT_COMPLETE	0x00200000	/* command completion */
+#define DBG_RX_FRAGS_SKB	0x00400000	/* skb header of Rx fragments */
+#define DBG_BSS_TABLE_RM	0x00800000	/* purging bss table entries */
+#define DBG_MONITOR_MODE	0x01000000	/* monitor mode */
+#define DBG_MIB			0x02000000	/* dump all MIBs on startup */
+#define DBG_MGMT_TIMER		0x04000000	/* dump mgmt_timer ops */
+#define DBG_WE_EVENTS		0x08000000	/* dump wireless events */
+#define DBG_FW			0x10000000	/* firmware download */
+#define DBG_DFU			0x20000000	/* device firmware upgrade */
+#define DBG_CMD			0x40000000
+#define DBG_MAC80211		0x80000000
+
+#define DBG_DEFAULTS		0
+
+/* Use our own dbg macro */
+#define at76_dbg(bits, format, arg...)					\
+do {									\
+	if (at76_debug & (bits))					\
+		printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg);	\
+} while (0)
+
+#define at76_dbg_dump(bits, buf, len, format, arg...)			\
+do {									\
+	if (at76_debug & (bits)) {					\
+		printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg);	\
+		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);	\
+	}								\
+} while (0)
+
+static uint at76_debug = DBG_DEFAULTS;
+
+/* Protect against concurrent firmware loading and parsing */
+static DEFINE_MUTEX(fw_mutex);
+
+static struct fwentry firmwares[] = {
+	[0] = { "" },
+	[BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" },
+	[BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" },
+	[BOARD_503] = { "atmel_at76c503-rfmd.bin" },
+	[BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" },
+	[BOARD_505] = { "atmel_at76c505-rfmd.bin" },
+	[BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" },
+	[BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
+	[BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
+};
+MODULE_FIRMWARE("atmel_at76c503-i3861.bin");
+MODULE_FIRMWARE("atmel_at76c503-i3863.bin");
+MODULE_FIRMWARE("atmel_at76c503-rfmd.bin");
+MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin");
+MODULE_FIRMWARE("atmel_at76c505-rfmd.bin");
+MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin");
+MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin");
+MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin");
+
+#define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
+
+static const struct usb_device_id dev_table[] = {
+	/*
+	 * at76c503-i3861
+	 */
+	/* Generic AT76C503/3861 device */
+	{ USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Linksys WUSB11 v2.1/v2.6 */
+	{ USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Netgear MA101 rev. A */
+	{ USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Tekram U300C / Allnet ALL0193 */
+	{ USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* HP HN210W J7801A */
+	{ USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Sitecom/Z-Com/Zyxel M4Y-750 */
+	{ USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Dynalink/Askey WLL013 (intersil) */
+	{ USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* EZ connect 11Mpbs USB Wireless Adapter SMC2662W v1 */
+	{ USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* BenQ AWL300 */
+	{ USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Addtron AWU-120, Compex WLU11 */
+	{ USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Intel AP310 AnyPoint II USB */
+	{ USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Dynalink L11U */
+	{ USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* Arescom WL-210, FCC id 07J-GL2411USB */
+	{ USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* I-O DATA WN-B11/USB */
+	{ USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/* BT Voyager 1010 */
+	{ USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+	/*
+	 * at76c503-i3863
+	 */
+	/* Generic AT76C503/3863 device */
+	{ USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) },
+	/* Samsung SWL-2100U */
+	{ USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) },
+	/*
+	 * at76c503-rfmd
+	 */
+	/* Generic AT76C503/RFMD device */
+	{ USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) },
+	/* Dynalink/Askey WLL013 (rfmd) */
+	{ USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) },
+	/* Linksys WUSB11 v2.6 */
+	{ USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) },
+	/* Network Everywhere NWU11B */
+	{ USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) },
+	/* Netgear MA101 rev. B */
+	{ USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) },
+	/* D-Link DWL-120 rev. E */
+	{ USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) },
+	/* Actiontec 802UAT1, HWU01150-01UK */
+	{ USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) },
+	/* AirVast W-Buddie WN210 */
+	{ USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) },
+	/* Dick Smith Electronics XH1153 802.11b USB adapter */
+	{ USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) },
+	/* CNet CNUSB611 */
+	{ USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) },
+	/* FiberLine FL-WL200U */
+	{ USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) },
+	/* BenQ AWL400 USB stick */
+	{ USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) },
+	/* 3Com 3CRSHEW696 */
+	{ USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) },
+	/* Siemens Santis ADSL USB WLAN adapter WLL 013 */
+	{ USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) },
+	/* Belkin F5D6050, version 2 */
+	{ USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) },
+	/* iBlitzz, BWU613 (not *B or *SB) */
+	{ USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) },
+	/* Gigabyte GN-WLBM101 */
+	{ USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) },
+	/* Planex GW-US11S */
+	{ USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) },
+	/* Internal WLAN adapter in h5[4,5]xx series iPAQs */
+	{ USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) },
+	/* Corega Wireless LAN USB-11 mini */
+	{ USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) },
+	/* Corega Wireless LAN USB-11 mini2 */
+	{ USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) },
+	/* Uniden PCW100 */
+	{ USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) },
+	/*
+	 * at76c503-rfmd-acc
+	 */
+	/* SMC2664W */
+	{ USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) },
+	/* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
+	{ USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) },
+	/*
+	 * at76c505-rfmd
+	 */
+	/* Generic AT76C505/RFMD */
+	{ USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) },
+	/*
+	 * at76c505-rfmd2958
+	 */
+	/* Generic AT76C505/RFMD, OvisLink WL-1130USB */
+	{ USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
+	/* Fiberline FL-WL240U */
+	{ USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) },
+	/* CNet CNUSB-611G */
+	{ USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) },
+	/* Linksys WUSB11 v2.8 */
+	{ USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) },
+	/* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
+	{ USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) },
+	/* Corega USB WLAN Stick 11 */
+	{ USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
+	/* Microstar MSI Box MS6978 */
+	{ USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) },
+	/*
+	 * at76c505a-rfmd2958
+	 */
+	/* Generic AT76C505A device */
+	{ USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) },
+	/* Generic AT76C505AS device */
+	{ USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
+	/* Siemens Gigaset USB WLAN Adapter 11 */
+	{ USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
+	/* OQO Model 01+ Internal Wi-Fi */
+	{ USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
+	/*
+	 * at76c505amx-rfmd
+	 */
+	/* Generic AT76C505AMX device */
+	{ USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, dev_table);
+
+/* Supported rates of this hardware, bit 7 marks basic rates */
+static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
+
+static const char *const preambles[] = { "long", "short", "auto" };
+
+/* Firmware download */
+/* DFU states */
+#define STATE_IDLE			0x00
+#define STATE_DETACH			0x01
+#define STATE_DFU_IDLE			0x02
+#define STATE_DFU_DOWNLOAD_SYNC		0x03
+#define STATE_DFU_DOWNLOAD_BUSY		0x04
+#define STATE_DFU_DOWNLOAD_IDLE		0x05
+#define STATE_DFU_MANIFEST_SYNC		0x06
+#define STATE_DFU_MANIFEST		0x07
+#define STATE_DFU_MANIFEST_WAIT_RESET	0x08
+#define STATE_DFU_UPLOAD_IDLE		0x09
+#define STATE_DFU_ERROR			0x0a
+
+/* DFU commands */
+#define DFU_DETACH			0
+#define DFU_DNLOAD			1
+#define DFU_UPLOAD			2
+#define DFU_GETSTATUS			3
+#define DFU_CLRSTATUS			4
+#define DFU_GETSTATE			5
+#define DFU_ABORT			6
+
+#define FW_BLOCK_SIZE 1024
+
+struct dfu_status {
+	unsigned char status;
+	unsigned char poll_timeout[3];
+	unsigned char state;
+	unsigned char string;
+} __packed;
+
+static inline int at76_is_intersil(enum board_type board)
+{
+	return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
+}
+
+static inline int at76_is_503rfmd(enum board_type board)
+{
+	return (board == BOARD_503 || board == BOARD_503_ACC);
+}
+
+static inline int at76_is_505a(enum board_type board)
+{
+	return (board == BOARD_505A || board == BOARD_505AMX);
+}
+
+/* Load a block of the first (internal) part of the firmware */
+static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
+				  void *block, int size)
+{
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
+			       USB_TYPE_CLASS | USB_DIR_OUT |
+			       USB_RECIP_INTERFACE, blockno, 0, block, size,
+			       USB_CTRL_GET_TIMEOUT);
+}
+
+static int at76_dfu_get_status(struct usb_device *udev,
+			       struct dfu_status *status)
+{
+	int ret;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
+			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
+			      0, 0, status, sizeof(struct dfu_status),
+			      USB_CTRL_GET_TIMEOUT);
+	return ret;
+}
+
+static int at76_dfu_get_state(struct usb_device *udev, u8 *state)
+{
+	int ret;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
+			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
+			      0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
+	return ret;
+}
+
+/* Convert timeout from the DFU status to jiffies */
+static inline unsigned long at76_get_timeout(struct dfu_status *s)
+{
+	return msecs_to_jiffies((s->poll_timeout[2] << 16)
+				| (s->poll_timeout[1] << 8)
+				| (s->poll_timeout[0]));
+}
+
+/* Load internal firmware from the buffer.  If manifest_sync_timeout > 0, use
+ * its value in jiffies in the MANIFEST_SYNC state.  */
+static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
+				int manifest_sync_timeout)
+{
+	int ret = 0;
+	int need_dfu_state = 1;
+	int is_done = 0;
+	u32 dfu_timeout = 0;
+	int bsize = 0;
+	int blockno = 0;
+	struct dfu_status *dfu_stat_buf = NULL;
+	u8 *dfu_state = NULL;
+	u8 *block = NULL;
+
+	at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
+		 manifest_sync_timeout);
+
+	if (!size) {
+		dev_err(&udev->dev, "FW buffer length invalid!\n");
+		return -EINVAL;
+	}
+
+	dfu_stat_buf = kmalloc(sizeof(struct dfu_status), GFP_KERNEL);
+	if (!dfu_stat_buf) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
+	if (!block) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	dfu_state = kmalloc(sizeof(u8), GFP_KERNEL);
+	if (!dfu_state) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+	*dfu_state = 0;
+
+	do {
+		if (need_dfu_state) {
+			ret = at76_dfu_get_state(udev, dfu_state);
+			if (ret < 0) {
+				dev_err(&udev->dev,
+					"cannot get DFU state: %d\n", ret);
+				goto exit;
+			}
+			need_dfu_state = 0;
+		}
+
+		switch (*dfu_state) {
+		case STATE_DFU_DOWNLOAD_SYNC:
+			at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
+			ret = at76_dfu_get_status(udev, dfu_stat_buf);
+			if (ret >= 0) {
+				*dfu_state = dfu_stat_buf->state;
+				dfu_timeout = at76_get_timeout(dfu_stat_buf);
+				need_dfu_state = 0;
+			} else
+				dev_err(&udev->dev,
+					"at76_dfu_get_status returned %d\n",
+					ret);
+			break;
+
+		case STATE_DFU_DOWNLOAD_BUSY:
+			at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
+			need_dfu_state = 1;
+
+			at76_dbg(DBG_DFU, "DFU: Resetting device");
+			schedule_timeout_interruptible(dfu_timeout);
+			break;
+
+		case STATE_DFU_DOWNLOAD_IDLE:
+			at76_dbg(DBG_DFU, "DOWNLOAD...");
+			fallthrough;
+		case STATE_DFU_IDLE:
+			at76_dbg(DBG_DFU, "DFU IDLE");
+
+			bsize = min_t(int, size, FW_BLOCK_SIZE);
+			memcpy(block, buf, bsize);
+			at76_dbg(DBG_DFU, "int fw, size left = %5d, "
+				 "bsize = %4d, blockno = %2d", size, bsize,
+				 blockno);
+			ret =
+			    at76_load_int_fw_block(udev, blockno, block, bsize);
+			buf += bsize;
+			size -= bsize;
+			blockno++;
+
+			if (ret != bsize)
+				dev_err(&udev->dev,
+					"at76_load_int_fw_block returned %d\n",
+					ret);
+			need_dfu_state = 1;
+			break;
+
+		case STATE_DFU_MANIFEST_SYNC:
+			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
+
+			ret = at76_dfu_get_status(udev, dfu_stat_buf);
+			if (ret < 0)
+				break;
+
+			*dfu_state = dfu_stat_buf->state;
+			dfu_timeout = at76_get_timeout(dfu_stat_buf);
+			need_dfu_state = 0;
+
+			/* override the timeout from the status response,
+			   needed for AT76C505A */
+			if (manifest_sync_timeout > 0)
+				dfu_timeout = manifest_sync_timeout;
+
+			at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
+			schedule_timeout_interruptible(dfu_timeout);
+			break;
+
+		case STATE_DFU_MANIFEST:
+			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
+			is_done = 1;
+			break;
+
+		case STATE_DFU_MANIFEST_WAIT_RESET:
+			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
+			is_done = 1;
+			break;
+
+		case STATE_DFU_UPLOAD_IDLE:
+			at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
+			break;
+
+		case STATE_DFU_ERROR:
+			at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
+			ret = -EPIPE;
+			break;
+
+		default:
+			at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", *dfu_state);
+			ret = -EINVAL;
+			break;
+		}
+	} while (!is_done && (ret >= 0));
+
+exit:
+	kfree(dfu_state);
+	kfree(block);
+	kfree(dfu_stat_buf);
+
+	if (ret >= 0)
+		ret = 0;
+
+	return ret;
+}
+
+/* LED trigger */
+static int tx_activity;
+static void at76_ledtrig_tx_timerfunc(struct timer_list *unused);
+static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc);
+DEFINE_LED_TRIGGER(ledtrig_tx);
+
+static void at76_ledtrig_tx_timerfunc(struct timer_list *unused)
+{
+	static int tx_lastactivity;
+
+	if (tx_lastactivity != tx_activity) {
+		tx_lastactivity = tx_activity;
+		led_trigger_event(ledtrig_tx, LED_FULL);
+		mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
+	} else
+		led_trigger_event(ledtrig_tx, LED_OFF);
+}
+
+static void at76_ledtrig_tx_activity(void)
+{
+	tx_activity++;
+	if (!timer_pending(&ledtrig_tx_timer))
+		mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
+}
+
+static int at76_remap(struct usb_device *udev)
+{
+	int ret;
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
+			      USB_TYPE_VENDOR | USB_DIR_OUT |
+			      USB_RECIP_INTERFACE, 0, 0, NULL, 0,
+			      USB_CTRL_GET_TIMEOUT);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int at76_get_op_mode(struct usb_device *udev)
+{
+	int ret;
+	u8 saved;
+	u8 *op_mode;
+
+	op_mode = kmalloc(1, GFP_NOIO);
+	if (!op_mode)
+		return -ENOMEM;
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+			      USB_TYPE_VENDOR | USB_DIR_IN |
+			      USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
+			      USB_CTRL_GET_TIMEOUT);
+	saved = *op_mode;
+	kfree(op_mode);
+
+	if (ret < 0)
+		return ret;
+	else if (ret < 1)
+		return -EIO;
+	else
+		return saved;
+}
+
+/* Load a block of the second ("external") part of the firmware */
+static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
+					 void *block, int size)
+{
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
+			       USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			       0x0802, blockno, block, size,
+			       USB_CTRL_GET_TIMEOUT);
+}
+
+static inline int at76_get_hw_cfg(struct usb_device *udev,
+				  union at76_hwcfg *buf, int buf_size)
+{
+	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+			       USB_TYPE_VENDOR | USB_DIR_IN |
+			       USB_RECIP_INTERFACE, 0x0a02, 0,
+			       buf, buf_size, USB_CTRL_GET_TIMEOUT);
+}
+
+/* Intersil boards use a different "value" for GetHWConfig requests */
+static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
+					   union at76_hwcfg *buf, int buf_size)
+{
+	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+			       USB_TYPE_VENDOR | USB_DIR_IN |
+			       USB_RECIP_INTERFACE, 0x0902, 0,
+			       buf, buf_size, USB_CTRL_GET_TIMEOUT);
+}
+
+/* Get the hardware configuration for the adapter and put it to the appropriate
+ * fields of 'priv' (the GetHWConfig request and interpretation of the result
+ * depends on the board type) */
+static int at76_get_hw_config(struct at76_priv *priv)
+{
+	int ret;
+	union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
+
+	if (!hwcfg)
+		return -ENOMEM;
+
+	if (at76_is_intersil(priv->board_type)) {
+		ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
+					       sizeof(hwcfg->i));
+		if (ret < 0)
+			goto exit;
+		memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
+		priv->regulatory_domain = hwcfg->i.regulatory_domain;
+	} else if (at76_is_503rfmd(priv->board_type)) {
+		ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
+		if (ret < 0)
+			goto exit;
+		memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
+		priv->regulatory_domain = hwcfg->r3.regulatory_domain;
+	} else {
+		ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
+		if (ret < 0)
+			goto exit;
+		memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
+		priv->regulatory_domain = hwcfg->r5.regulatory_domain;
+	}
+
+exit:
+	kfree(hwcfg);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n",
+			  ret);
+
+	return ret;
+}
+
+static struct reg_domain const *at76_get_reg_domain(u16 code)
+{
+	int i;
+	static struct reg_domain const fd_tab[] = {
+		{ 0x10, "FCC (USA)", 0x7ff },	/* ch 1-11 */
+		{ 0x20, "IC (Canada)", 0x7ff },	/* ch 1-11 */
+		{ 0x30, "ETSI (most of Europe)", 0x1fff },	/* ch 1-13 */
+		{ 0x31, "Spain", 0x600 },	/* ch 10-11 */
+		{ 0x32, "France", 0x1e00 },	/* ch 10-13 */
+		{ 0x40, "MKK (Japan)", 0x2000 },	/* ch 14 */
+		{ 0x41, "MKK1 (Japan)", 0x3fff },	/* ch 1-14 */
+		{ 0x50, "Israel", 0x3fc },	/* ch 3-9 */
+		{ 0x00, "<unknown>", 0xffffffff }	/* ch 1-32 */
+	};
+
+	/* Last entry is fallback for unknown domain code */
+	for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
+		if (code == fd_tab[i].code)
+			break;
+
+	return &fd_tab[i];
+}
+
+static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
+			       int buf_size)
+{
+	int ret;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+			      USB_TYPE_VENDOR | USB_DIR_IN |
+			      USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
+			      USB_CTRL_GET_TIMEOUT);
+	if (ret >= 0 && ret != buf_size)
+		return -EIO;
+	return ret;
+}
+
+/* Return positive number for status, negative for an error */
+static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
+{
+	u8 *stat_buf;
+	int ret;
+
+	stat_buf = kmalloc(40, GFP_NOIO);
+	if (!stat_buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
+			USB_TYPE_VENDOR | USB_DIR_IN |
+			USB_RECIP_INTERFACE, cmd, 0, stat_buf,
+			40, USB_CTRL_GET_TIMEOUT);
+	if (ret >= 0)
+		ret = stat_buf[5];
+	kfree(stat_buf);
+
+	return ret;
+}
+
+#define MAKE_CMD_CASE(c) case (c): return #c
+static const char *at76_get_cmd_string(u8 cmd_status)
+{
+	switch (cmd_status) {
+		MAKE_CMD_CASE(CMD_SET_MIB);
+		MAKE_CMD_CASE(CMD_GET_MIB);
+		MAKE_CMD_CASE(CMD_SCAN);
+		MAKE_CMD_CASE(CMD_JOIN);
+		MAKE_CMD_CASE(CMD_START_IBSS);
+		MAKE_CMD_CASE(CMD_RADIO_ON);
+		MAKE_CMD_CASE(CMD_RADIO_OFF);
+		MAKE_CMD_CASE(CMD_STARTUP);
+	}
+
+	return "UNKNOWN";
+}
+
+static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
+				 int buf_size)
+{
+	int ret;
+	struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
+					       buf_size, GFP_KERNEL);
+
+	if (!cmd_buf)
+		return -ENOMEM;
+
+	cmd_buf->cmd = cmd;
+	cmd_buf->reserved = 0;
+	cmd_buf->size = cpu_to_le16(buf_size);
+	memcpy(cmd_buf->data, buf, buf_size);
+
+	at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size,
+		      "issuing command %s (0x%02x)",
+		      at76_get_cmd_string(cmd), cmd);
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
+			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			      0, 0, cmd_buf,
+			      sizeof(struct at76_command) + buf_size,
+			      USB_CTRL_GET_TIMEOUT);
+	kfree(cmd_buf);
+	return ret;
+}
+
+#define MAKE_CMD_STATUS_CASE(c)	case (c): return #c
+static const char *at76_get_cmd_status_string(u8 cmd_status)
+{
+	switch (cmd_status) {
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
+		MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
+	}
+
+	return "UNKNOWN";
+}
+
+/* Wait until the command is completed */
+static int at76_wait_completion(struct at76_priv *priv, int cmd)
+{
+	int status = 0;
+	unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
+
+	do {
+		status = at76_get_cmd_status(priv->udev, cmd);
+		if (status < 0) {
+			wiphy_err(priv->hw->wiphy,
+				  "at76_get_cmd_status failed: %d\n",
+				  status);
+			break;
+		}
+
+		at76_dbg(DBG_WAIT_COMPLETE,
+			 "%s: Waiting on cmd %d, status = %d (%s)",
+			 wiphy_name(priv->hw->wiphy), cmd, status,
+			 at76_get_cmd_status_string(status));
+
+		if (status != CMD_STATUS_IN_PROGRESS
+		    && status != CMD_STATUS_IDLE)
+			break;
+
+		schedule_timeout_interruptible(HZ / 10);	/* 100 ms */
+		if (time_after(jiffies, timeout)) {
+			wiphy_err(priv->hw->wiphy,
+				  "completion timeout for command %d\n", cmd);
+			status = -ETIMEDOUT;
+			break;
+		}
+	} while (1);
+
+	return status;
+}
+
+static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
+{
+	int ret;
+
+	ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
+				    offsetof(struct set_mib_buffer,
+					     data) + buf->size);
+	if (ret < 0)
+		return ret;
+
+	ret = at76_wait_completion(priv, CMD_SET_MIB);
+	if (ret != CMD_STATUS_COMPLETE) {
+		wiphy_info(priv->hw->wiphy,
+			   "set_mib: at76_wait_completion failed with %d\n",
+			   ret);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
+static int at76_set_radio(struct at76_priv *priv, int enable)
+{
+	int ret;
+	int cmd;
+
+	if (priv->radio_on == enable)
+		return 0;
+
+	cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
+
+	ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy,
+			  "at76_set_card_command(%d) failed: %d\n", cmd, ret);
+	else
+		ret = 1;
+
+	priv->radio_on = enable;
+	return ret;
+}
+
+/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
+static int at76_set_pm_mode(struct at76_priv *priv)
+{
+	int ret = 0;
+
+	priv->mib_buf.type = MIB_MAC_MGMT;
+	priv->mib_buf.size = 1;
+	priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
+	priv->mib_buf.data.byte = priv->pm_mode;
+
+	ret = at76_set_mib(priv, &priv->mib_buf);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n",
+			  ret);
+
+	return ret;
+}
+
+static int at76_set_preamble(struct at76_priv *priv, u8 type)
+{
+	int ret = 0;
+
+	priv->mib_buf.type = MIB_LOCAL;
+	priv->mib_buf.size = 1;
+	priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
+	priv->mib_buf.data.byte = type;
+
+	ret = at76_set_mib(priv, &priv->mib_buf);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n",
+			  ret);
+
+	return ret;
+}
+
+static int at76_set_frag(struct at76_priv *priv, u16 size)
+{
+	int ret = 0;
+
+	priv->mib_buf.type = MIB_MAC;
+	priv->mib_buf.size = 2;
+	priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
+	priv->mib_buf.data.word = cpu_to_le16(size);
+
+	ret = at76_set_mib(priv, &priv->mib_buf);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy,
+			  "set_mib (frag threshold) failed: %d\n", ret);
+
+	return ret;
+}
+
+static int at76_set_rts(struct at76_priv *priv, u16 size)
+{
+	int ret = 0;
+
+	priv->mib_buf.type = MIB_MAC;
+	priv->mib_buf.size = 2;
+	priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
+	priv->mib_buf.data.word = cpu_to_le16(size);
+
+	ret = at76_set_mib(priv, &priv->mib_buf);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret);
+
+	return ret;
+}
+
+static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
+{
+	int ret = 0;
+
+	priv->mib_buf.type = MIB_LOCAL;
+	priv->mib_buf.size = 1;
+	priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
+	priv->mib_buf.data.byte = onoff;
+
+	ret = at76_set_mib(priv, &priv->mib_buf);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy,
+			  "set_mib (autorate fallback) failed: %d\n", ret);
+
+	return ret;
+}
+
+static void at76_dump_mib_mac_addr(struct at76_priv *priv)
+{
+	int i;
+	int ret;
+	struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr),
+					 GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
+			   sizeof(struct mib_mac_addr));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy,
+			  "at76_get_mib (MAC_ADDR) failed: %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x",
+		 wiphy_name(priv->hw->wiphy),
+		 m->mac_addr, m->res[0], m->res[1]);
+	for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
+		at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, "
+			 "status %d", wiphy_name(priv->hw->wiphy), i,
+			 m->group_addr[i], m->group_addr_status[i]);
+exit:
+	kfree(m);
+}
+
+static void at76_dump_mib_mac_wep(struct at76_priv *priv)
+{
+	int i;
+	int ret;
+	int key_len;
+	struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
+			   sizeof(struct mib_mac_wep));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy,
+			  "at76_get_mib (MAC_WEP) failed: %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
+		 "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
+		 "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
+		 m->privacy_invoked, m->wep_default_key_id,
+		 m->wep_key_mapping_len, m->exclude_unencrypted,
+		 le32_to_cpu(m->wep_icv_error_count),
+		 le32_to_cpu(m->wep_excluded_count), m->encryption_level,
+		 m->wep_default_key_id);
+
+	key_len = (m->encryption_level == 1) ?
+	    WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
+
+	for (i = 0; i < WEP_KEYS; i++)
+		at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %*phD",
+			 wiphy_name(priv->hw->wiphy), i,
+			 key_len, m->wep_default_keyvalue[i]);
+exit:
+	kfree(m);
+}
+
+static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
+{
+	int ret;
+	struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt),
+					 GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
+			   sizeof(struct mib_mac_mgmt));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy,
+			  "at76_get_mib (MAC_MGMT) failed: %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
+		 "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
+		 "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
+		 "current_bssid %pM current_essid %*phD current_bss_type %d "
+		 "pm_mode %d ibss_change %d res %d "
+		 "multi_domain_capability_implemented %d "
+		 "international_roaming %d country_string %.3s",
+		 wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
+		 le16_to_cpu(m->CFP_max_duration),
+		 le16_to_cpu(m->medium_occupancy_limit),
+		 le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
+		 m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
+		 m->CFP_period, m->current_bssid,
+		 IW_ESSID_MAX_SIZE, m->current_essid,
+		 m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
+		 m->res, m->multi_domain_capability_implemented,
+		 m->multi_domain_capability_enabled, m->country_string);
+exit:
+	kfree(m);
+}
+
+static void at76_dump_mib_mac(struct at76_priv *priv)
+{
+	int ret;
+	struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy,
+			  "at76_get_mib (MAC) failed: %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
+		 "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
+		 "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
+		 "scan_type %d scan_channel %d probe_delay %u "
+		 "min_channel_time %d max_channel_time %d listen_int %d "
+		 "desired_ssid %*phD desired_bssid %pM desired_bsstype %d",
+		 wiphy_name(priv->hw->wiphy),
+		 le32_to_cpu(m->max_tx_msdu_lifetime),
+		 le32_to_cpu(m->max_rx_lifetime),
+		 le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
+		 le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
+		 m->short_retry_time, m->long_retry_time, m->scan_type,
+		 m->scan_channel, le16_to_cpu(m->probe_delay),
+		 le16_to_cpu(m->min_channel_time),
+		 le16_to_cpu(m->max_channel_time),
+		 le16_to_cpu(m->listen_interval),
+		 IW_ESSID_MAX_SIZE, m->desired_ssid,
+		 m->desired_bssid, m->desired_bsstype);
+exit:
+	kfree(m);
+}
+
+static void at76_dump_mib_phy(struct at76_priv *priv)
+{
+	int ret;
+	struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy,
+			  "at76_get_mib (PHY) failed: %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
+		 "sifs_time %d preamble_length %d plcp_header_length %d "
+		 "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
+		 "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
+		 "phy_type %d current_reg_domain %d",
+		 wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
+		 le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
+		 le16_to_cpu(m->preamble_length),
+		 le16_to_cpu(m->plcp_header_length),
+		 le16_to_cpu(m->mpdu_max_length),
+		 le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
+		 m->operation_rate_set[1], m->operation_rate_set[2],
+		 m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
+		 m->phy_type, m->current_reg_domain);
+exit:
+	kfree(m);
+}
+
+static void at76_dump_mib_local(struct at76_priv *priv)
+{
+	int ret;
+	struct mib_local *m = kmalloc(sizeof(*m), GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy,
+			  "at76_get_mib (LOCAL) failed: %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
+		 "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
+		 "preamble_type %d", wiphy_name(priv->hw->wiphy),
+		 m->beacon_enable,
+		 m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
+		 m->preamble_type);
+exit:
+	kfree(m);
+}
+
+static void at76_dump_mib_mdomain(struct at76_priv *priv)
+{
+	int ret;
+	struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
+			   sizeof(struct mib_mdomain));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy,
+			  "at76_get_mib (MDOMAIN) failed: %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %*phD",
+		 wiphy_name(priv->hw->wiphy),
+		 (int)sizeof(m->channel_list), m->channel_list);
+
+	at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %*phD",
+		 wiphy_name(priv->hw->wiphy),
+		 (int)sizeof(m->tx_powerlevel), m->tx_powerlevel);
+exit:
+	kfree(m);
+}
+
+/* Enable monitor mode */
+static int at76_start_monitor(struct at76_priv *priv)
+{
+	struct at76_req_scan scan;
+	int ret;
+
+	memset(&scan, 0, sizeof(struct at76_req_scan));
+	eth_broadcast_addr(scan.bssid);
+
+	scan.channel = priv->channel;
+	scan.scan_type = SCAN_TYPE_PASSIVE;
+	scan.international_scan = 0;
+	scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
+	scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
+	scan.probe_delay = cpu_to_le16(0);
+
+	ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
+	if (ret >= 0)
+		ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
+
+	return ret;
+}
+
+/* Calculate padding from txbuf->wlength (which excludes the USB TX header),
+   likely to compensate a flaw in the AT76C503A USB part ... */
+static inline int at76_calc_padding(int wlen)
+{
+	/* add the USB TX header */
+	wlen += AT76_TX_HDRLEN;
+
+	wlen = wlen % 64;
+
+	if (wlen < 50)
+		return 50 - wlen;
+
+	if (wlen >= 61)
+		return 64 + 50 - wlen;
+
+	return 0;
+}
+
+static void at76_rx_callback(struct urb *urb)
+{
+	struct at76_priv *priv = urb->context;
+
+	tasklet_schedule(&priv->rx_tasklet);
+}
+
+static int at76_submit_rx_urb(struct at76_priv *priv)
+{
+	int ret;
+	int size;
+	struct sk_buff *skb = priv->rx_skb;
+
+	if (!priv->rx_urb) {
+		wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n",
+			  __func__);
+		return -EFAULT;
+	}
+
+	if (!skb) {
+		skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
+		if (!skb) {
+			wiphy_err(priv->hw->wiphy,
+				  "cannot allocate rx skbuff\n");
+			ret = -ENOMEM;
+			goto exit;
+		}
+		priv->rx_skb = skb;
+	} else {
+		skb_push(skb, skb_headroom(skb));
+		skb_trim(skb, 0);
+	}
+
+	size = skb_tailroom(skb);
+	usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
+			  skb_put(skb, size), size, at76_rx_callback, priv);
+	ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
+	if (ret < 0) {
+		if (ret == -ENODEV)
+			at76_dbg(DBG_DEVSTART,
+				 "usb_submit_urb returned -ENODEV");
+		else
+			wiphy_err(priv->hw->wiphy,
+				  "rx, usb_submit_urb failed: %d\n", ret);
+	}
+
+exit:
+	if (ret < 0 && ret != -ENODEV)
+		wiphy_err(priv->hw->wiphy,
+			  "cannot submit rx urb - please unload the driver and/or power cycle the device\n");
+
+	return ret;
+}
+
+/* Download external firmware */
+static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
+{
+	int ret;
+	int op_mode;
+	int blockno = 0;
+	int bsize;
+	u8 *block;
+	u8 *buf = fwe->extfw;
+	int size = fwe->extfw_size;
+
+	if (!buf || !size)
+		return -ENOENT;
+
+	op_mode = at76_get_op_mode(udev);
+	at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
+
+	if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
+		dev_err(&udev->dev, "unexpected opmode %d\n", op_mode);
+		return -EINVAL;
+	}
+
+	block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
+	if (!block)
+		return -ENOMEM;
+
+	at76_dbg(DBG_DEVSTART, "downloading external firmware");
+
+	/* for fw >= 0.100, the device needs an extra empty block */
+	do {
+		bsize = min_t(int, size, FW_BLOCK_SIZE);
+		memcpy(block, buf, bsize);
+		at76_dbg(DBG_DEVSTART,
+			 "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
+			 size, bsize, blockno);
+		ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
+		if (ret != bsize) {
+			dev_err(&udev->dev,
+				"loading %dth firmware block failed: %d\n",
+				blockno, ret);
+			ret = -EIO;
+			goto exit;
+		}
+		buf += bsize;
+		size -= bsize;
+		blockno++;
+	} while (bsize > 0);
+
+	if (at76_is_505a(fwe->board_type)) {
+		at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
+		schedule_timeout_interruptible(HZ / 5 + 1);
+	}
+
+exit:
+	kfree(block);
+	if (ret < 0)
+		dev_err(&udev->dev,
+			"downloading external firmware failed: %d\n", ret);
+	return ret;
+}
+
+/* Download internal firmware */
+static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
+{
+	int ret;
+	int need_remap = !at76_is_505a(fwe->board_type);
+
+	ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
+				   need_remap ? 0 : 2 * HZ);
+
+	if (ret < 0) {
+		dev_err(&udev->dev,
+			"downloading internal fw failed with %d\n", ret);
+		goto exit;
+	}
+
+	at76_dbg(DBG_DEVSTART, "sending REMAP");
+
+	/* no REMAP for 505A (see SF driver) */
+	if (need_remap) {
+		ret = at76_remap(udev);
+		if (ret < 0) {
+			dev_err(&udev->dev,
+				"sending REMAP failed with %d\n", ret);
+			goto exit;
+		}
+	}
+
+	at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
+	schedule_timeout_interruptible(2 * HZ + 1);
+	usb_reset_device(udev);
+
+exit:
+	return ret;
+}
+
+static int at76_startup_device(struct at76_priv *priv)
+{
+	struct at76_card_config *ccfg = &priv->card_config;
+	int ret;
+
+	at76_dbg(DBG_PARAMS,
+		 "%s param: ssid %.*s (%*phD) mode %s ch %d wep %s key %d "
+		 "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
+		 priv->essid, IW_ESSID_MAX_SIZE, priv->essid,
+		 priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
+		 priv->channel, priv->wep_enabled ? "enabled" : "disabled",
+		 priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
+	at76_dbg(DBG_PARAMS,
+		 "%s param: preamble %s rts %d retry %d frag %d "
+		 "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
+		 preambles[priv->preamble_type], priv->rts_threshold,
+		 priv->short_retry_limit, priv->frag_threshold,
+		 priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
+		 TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
+		 TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
+		 TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
+		 TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
+	at76_dbg(DBG_PARAMS,
+		 "%s param: pm_mode %d pm_period %d auth_mode %s "
+		 "scan_times %d %d scan_mode %s",
+		 wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
+		 priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
+		 priv->scan_min_time, priv->scan_max_time,
+		 priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
+
+	memset(ccfg, 0, sizeof(struct at76_card_config));
+	ccfg->promiscuous_mode = 0;
+	ccfg->short_retry_limit = priv->short_retry_limit;
+
+	if (priv->wep_enabled) {
+		if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
+			ccfg->encryption_type = 2;
+		else
+			ccfg->encryption_type = 1;
+
+		/* jal: always exclude unencrypted if WEP is active */
+		ccfg->exclude_unencrypted = 1;
+	} else {
+		ccfg->exclude_unencrypted = 0;
+		ccfg->encryption_type = 0;
+	}
+
+	ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
+	ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);
+
+	memcpy(ccfg->basic_rate_set, hw_rates, 4);
+	/* jal: really needed, we do a set_mib for autorate later ??? */
+	ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
+	ccfg->channel = priv->channel;
+	ccfg->privacy_invoked = priv->wep_enabled;
+	memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
+	ccfg->ssid_len = priv->essid_size;
+
+	ccfg->wep_default_key_id = priv->wep_key_id;
+	memcpy(ccfg->wep_default_key_value, priv->wep_keys,
+	       sizeof(priv->wep_keys));
+
+	ccfg->short_preamble = priv->preamble_type;
+	ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
+
+	ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
+				    sizeof(struct at76_card_config));
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+			  ret);
+		return ret;
+	}
+
+	at76_wait_completion(priv, CMD_STARTUP);
+
+	/* remove BSSID from previous run */
+	eth_zero_addr(priv->bssid);
+
+	priv->scanning = false;
+
+	if (at76_set_radio(priv, 1) == 1)
+		at76_wait_completion(priv, CMD_RADIO_ON);
+
+	ret = at76_set_preamble(priv, priv->preamble_type);
+	if (ret < 0)
+		return ret;
+
+	ret = at76_set_frag(priv, priv->frag_threshold);
+	if (ret < 0)
+		return ret;
+
+	ret = at76_set_rts(priv, priv->rts_threshold);
+	if (ret < 0)
+		return ret;
+
+	ret = at76_set_autorate_fallback(priv,
+					 priv->txrate == TX_RATE_AUTO ? 1 : 0);
+	if (ret < 0)
+		return ret;
+
+	ret = at76_set_pm_mode(priv);
+	if (ret < 0)
+		return ret;
+
+	if (at76_debug & DBG_MIB) {
+		at76_dump_mib_mac(priv);
+		at76_dump_mib_mac_addr(priv);
+		at76_dump_mib_mac_mgmt(priv);
+		at76_dump_mib_mac_wep(priv);
+		at76_dump_mib_mdomain(priv);
+		at76_dump_mib_phy(priv);
+		at76_dump_mib_local(priv);
+	}
+
+	return 0;
+}
+
+/* Enable or disable promiscuous mode */
+static void at76_work_set_promisc(struct work_struct *work)
+{
+	struct at76_priv *priv = container_of(work, struct at76_priv,
+					      work_set_promisc);
+	int ret = 0;
+
+	if (priv->device_unplugged)
+		return;
+
+	mutex_lock(&priv->mtx);
+
+	priv->mib_buf.type = MIB_LOCAL;
+	priv->mib_buf.size = 1;
+	priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
+	priv->mib_buf.data.byte = priv->promisc ? 1 : 0;
+
+	ret = at76_set_mib(priv, &priv->mib_buf);
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy,
+			  "set_mib (promiscuous_mode) failed: %d\n", ret);
+
+	mutex_unlock(&priv->mtx);
+}
+
+/* Submit Rx urb back to the device */
+static void at76_work_submit_rx(struct work_struct *work)
+{
+	struct at76_priv *priv = container_of(work, struct at76_priv,
+					      work_submit_rx);
+
+	mutex_lock(&priv->mtx);
+	at76_submit_rx_urb(priv);
+	mutex_unlock(&priv->mtx);
+}
+
+/* This is a workaround to make scan working:
+ * currently mac80211 does not process frames with no frequency
+ * information.
+ * However during scan the HW performs a sweep by itself, and we
+ * are unable to know where the radio is actually tuned.
+ * This function tries to do its best to guess this information..
+ * During scan, If the current frame is a beacon or a probe response,
+ * the channel information is extracted from it.
+ * When not scanning, for other frames, or if it happens that for
+ * whatever reason we fail to parse beacons and probe responses, this
+ * function returns the priv->channel information, that should be correct
+ * at least when we are not scanning.
+ */
+static inline int at76_guess_freq(struct at76_priv *priv)
+{
+	size_t el_off;
+	const u8 *el;
+	int channel = priv->channel;
+	int len = priv->rx_skb->len;
+	struct ieee80211_hdr *hdr = (void *)priv->rx_skb->data;
+
+	if (!priv->scanning)
+		goto exit;
+
+	if (len < 24)
+		goto exit;
+
+	if (ieee80211_is_probe_resp(hdr->frame_control)) {
+		el_off = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
+		el = ((struct ieee80211_mgmt *)hdr)->u.probe_resp.variable;
+	} else if (ieee80211_is_beacon(hdr->frame_control)) {
+		el_off = offsetof(struct ieee80211_mgmt, u.beacon.variable);
+		el = ((struct ieee80211_mgmt *)hdr)->u.beacon.variable;
+	} else {
+		goto exit;
+	}
+	len -= el_off;
+
+	el = cfg80211_find_ie(WLAN_EID_DS_PARAMS, el, len);
+	if (el && el[1] > 0)
+		channel = el[2];
+
+exit:
+	return ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ);
+}
+
+static void at76_rx_tasklet(struct tasklet_struct *t)
+{
+	struct at76_priv *priv = from_tasklet(priv, t, rx_tasklet);
+	struct urb *urb = priv->rx_urb;
+	struct at76_rx_buffer *buf;
+	struct ieee80211_rx_status rx_status = { 0 };
+
+	if (priv->device_unplugged) {
+		at76_dbg(DBG_DEVSTART, "device unplugged");
+		at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
+		return;
+	}
+
+	if (!priv->rx_skb || !priv->rx_skb->data)
+		return;
+
+	buf = (struct at76_rx_buffer *)priv->rx_skb->data;
+
+	if (urb->status != 0) {
+		if (urb->status != -ENOENT && urb->status != -ECONNRESET)
+			at76_dbg(DBG_URB,
+				 "%s %s: - nonzero Rx bulk status received: %d",
+				 __func__, wiphy_name(priv->hw->wiphy),
+				 urb->status);
+		return;
+	}
+
+	at76_dbg(DBG_RX_ATMEL_HDR,
+		 "%s: rx frame: rate %d rssi %d noise %d link %d",
+		 wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
+		 buf->noise_level, buf->link_quality);
+
+	skb_pull(priv->rx_skb, AT76_RX_HDRLEN);
+	skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength));
+	at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data,
+		      priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len);
+
+	rx_status.signal = buf->rssi;
+	rx_status.flag |= RX_FLAG_DECRYPTED;
+	rx_status.flag |= RX_FLAG_IV_STRIPPED;
+	rx_status.band = NL80211_BAND_2GHZ;
+	rx_status.freq = at76_guess_freq(priv);
+
+	at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
+		 priv->rx_skb->len, priv->rx_skb->data_len);
+	memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status));
+	ieee80211_rx_irqsafe(priv->hw, priv->rx_skb);
+
+	/* Use a new skb for the next receive */
+	priv->rx_skb = NULL;
+
+	at76_submit_rx_urb(priv);
+}
+
+/* Load firmware into kernel memory and parse it */
+static struct fwentry *at76_load_firmware(struct usb_device *udev,
+					  enum board_type board_type)
+{
+	int ret;
+	char *str;
+	struct at76_fw_header *fwh;
+	struct fwentry *fwe = &firmwares[board_type];
+
+	mutex_lock(&fw_mutex);
+
+	if (fwe->loaded) {
+		at76_dbg(DBG_FW, "re-using previously loaded fw");
+		goto exit;
+	}
+
+	at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
+	ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
+	if (ret < 0) {
+		dev_err(&udev->dev, "firmware %s not found!\n",
+			fwe->fwname);
+		dev_err(&udev->dev,
+			"you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n");
+		goto exit;
+	}
+
+	at76_dbg(DBG_FW, "got it.");
+	fwh = (struct at76_fw_header *)(fwe->fw->data);
+
+	if (fwe->fw->size <= sizeof(*fwh)) {
+		dev_err(&udev->dev,
+			"firmware is too short (0x%zx)\n", fwe->fw->size);
+		goto exit;
+	}
+
+	/* CRC currently not checked */
+	fwe->board_type = le32_to_cpu(fwh->board_type);
+	if (fwe->board_type != board_type) {
+		dev_err(&udev->dev,
+			"board type mismatch, requested %u, got %u\n",
+			board_type, fwe->board_type);
+		goto exit;
+	}
+
+	fwe->fw_version.major = fwh->major;
+	fwe->fw_version.minor = fwh->minor;
+	fwe->fw_version.patch = fwh->patch;
+	fwe->fw_version.build = fwh->build;
+
+	str = (char *)fwh + le32_to_cpu(fwh->str_offset);
+	fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
+	fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
+	fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
+	fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
+
+	fwe->loaded = 1;
+
+	dev_printk(KERN_DEBUG, &udev->dev,
+		   "using firmware %s (version %d.%d.%d-%d)\n",
+		   fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
+
+	at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
+		 le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
+		 le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
+	at76_dbg(DBG_DEVSTART, "firmware id %s", str);
+
+exit:
+	mutex_unlock(&fw_mutex);
+
+	if (fwe->loaded)
+		return fwe;
+	else
+		return NULL;
+}
+
+static int at76_join(struct at76_priv *priv)
+{
+	struct at76_req_join join;
+	int ret;
+
+	memset(&join, 0, sizeof(struct at76_req_join));
+	memcpy(join.essid, priv->essid, priv->essid_size);
+	join.essid_size = priv->essid_size;
+	memcpy(join.bssid, priv->bssid, ETH_ALEN);
+	join.bss_type = INFRASTRUCTURE_MODE;
+	join.channel = priv->channel;
+	join.timeout = cpu_to_le16(2000);
+
+	at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__);
+	ret = at76_set_card_command(priv->udev, CMD_JOIN, &join,
+				    sizeof(struct at76_req_join));
+
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+			  ret);
+		return 0;
+	}
+
+	ret = at76_wait_completion(priv, CMD_JOIN);
+	at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
+	if (ret != CMD_STATUS_COMPLETE) {
+		wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n",
+			  ret);
+		return 0;
+	}
+
+	at76_set_pm_mode(priv);
+
+	return 0;
+}
+
+static void at76_work_join_bssid(struct work_struct *work)
+{
+	struct at76_priv *priv = container_of(work, struct at76_priv,
+					      work_join_bssid);
+
+	if (priv->device_unplugged)
+		return;
+
+	mutex_lock(&priv->mtx);
+
+	if (is_valid_ether_addr(priv->bssid))
+		at76_join(priv);
+
+	mutex_unlock(&priv->mtx);
+}
+
+static void at76_mac80211_tx_callback(struct urb *urb)
+{
+	struct at76_priv *priv = urb->context;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
+
+	at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		info->flags |= IEEE80211_TX_STAT_ACK;
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+		/* fail, urb has been unlinked */
+		/* FIXME: add error message */
+		break;
+	default:
+		at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
+			 __func__, urb->status);
+		break;
+	}
+
+	memset(&info->status, 0, sizeof(info->status));
+
+	ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);
+
+	priv->tx_skb = NULL;
+
+	ieee80211_wake_queues(priv->hw);
+}
+
+static void at76_mac80211_tx(struct ieee80211_hw *hw,
+			     struct ieee80211_tx_control *control,
+			     struct sk_buff *skb)
+{
+	struct at76_priv *priv = hw->priv;
+	struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
+	int padding, submit_len, ret;
+
+	at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+	if (priv->tx_urb->status == -EINPROGRESS) {
+		wiphy_err(priv->hw->wiphy,
+			  "%s called while tx urb is pending\n", __func__);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* The following code lines are important when the device is going to
+	 * authenticate with a new bssid. The driver must send CMD_JOIN before
+	 * an authentication frame is transmitted. For this to succeed, the
+	 * correct bssid of the AP must be known. As mac80211 does not inform
+	 * drivers about the bssid prior to the authentication process the
+	 * following workaround is necessary. If the TX frame is an
+	 * authentication frame extract the bssid and send the CMD_JOIN. */
+	if (mgmt->frame_control & cpu_to_le16(IEEE80211_STYPE_AUTH)) {
+		if (!ether_addr_equal_64bits(priv->bssid, mgmt->bssid)) {
+			memcpy(priv->bssid, mgmt->bssid, ETH_ALEN);
+			ieee80211_queue_work(hw, &priv->work_join_bssid);
+			dev_kfree_skb_any(skb);
+			return;
+		}
+	}
+
+	ieee80211_stop_queues(hw);
+
+	at76_ledtrig_tx_activity();	/* tell ledtrigger we send a packet */
+
+	WARN_ON(priv->tx_skb != NULL);
+
+	priv->tx_skb = skb;
+	padding = at76_calc_padding(skb->len);
+	submit_len = AT76_TX_HDRLEN + skb->len + padding;
+
+	/* setup 'Atmel' header */
+	memset(tx_buffer, 0, sizeof(*tx_buffer));
+	tx_buffer->padding = padding;
+	tx_buffer->wlength = cpu_to_le16(skb->len);
+	tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
+	memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
+	memcpy(tx_buffer->packet, skb->data, skb->len);
+
+	at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
+		 wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
+		 tx_buffer->padding, tx_buffer->tx_rate);
+
+	/* send stuff */
+	at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len,
+		      "%s(): tx_buffer %d bytes:", __func__, submit_len);
+	usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
+			  submit_len, at76_mac80211_tx_callback, priv);
+	ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
+	if (ret) {
+		wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret);
+		if (ret == -EINVAL)
+			wiphy_err(priv->hw->wiphy,
+				  "-EINVAL: tx urb %p hcpriv %p complete %p\n",
+				  priv->tx_urb,
+				  priv->tx_urb->hcpriv, priv->tx_urb->complete);
+	}
+}
+
+static int at76_mac80211_start(struct ieee80211_hw *hw)
+{
+	struct at76_priv *priv = hw->priv;
+	int ret;
+
+	at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+	mutex_lock(&priv->mtx);
+
+	ret = at76_submit_rx_urb(priv);
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n",
+			  ret);
+		goto error;
+	}
+
+	at76_startup_device(priv);
+
+	at76_start_monitor(priv);
+
+error:
+	mutex_unlock(&priv->mtx);
+
+	return 0;
+}
+
+static void at76_mac80211_stop(struct ieee80211_hw *hw)
+{
+	struct at76_priv *priv = hw->priv;
+
+	at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+	cancel_delayed_work(&priv->dwork_hw_scan);
+	cancel_work_sync(&priv->work_join_bssid);
+	cancel_work_sync(&priv->work_set_promisc);
+
+	mutex_lock(&priv->mtx);
+
+	if (!priv->device_unplugged) {
+		/* We are called by "ifconfig ethX down", not because the
+		 * device is not available anymore. */
+		at76_set_radio(priv, 0);
+
+		/* We unlink rx_urb because at76_open() re-submits it.
+		 * If unplugged, at76_delete_device() takes care of it. */
+		usb_kill_urb(priv->rx_urb);
+	}
+
+	mutex_unlock(&priv->mtx);
+}
+
+static int at76_add_interface(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif)
+{
+	struct at76_priv *priv = hw->priv;
+	int ret = 0;
+
+	at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+	mutex_lock(&priv->mtx);
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		priv->iw_mode = IW_MODE_INFRA;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		goto exit;
+	}
+
+exit:
+	mutex_unlock(&priv->mtx);
+
+	return ret;
+}
+
+static void at76_remove_interface(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif)
+{
+	at76_dbg(DBG_MAC80211, "%s()", __func__);
+}
+
+static void at76_dwork_hw_scan(struct work_struct *work)
+{
+	struct at76_priv *priv = container_of(work, struct at76_priv,
+					      dwork_hw_scan.work);
+	struct cfg80211_scan_info info = {
+		.aborted = false,
+	};
+	int ret;
+
+	if (priv->device_unplugged)
+		return;
+
+	mutex_lock(&priv->mtx);
+
+	ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
+	at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret);
+
+	/* FIXME: add maximum time for scan to complete */
+
+	if (ret != CMD_STATUS_COMPLETE) {
+		ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
+					     SCAN_POLL_INTERVAL);
+		mutex_unlock(&priv->mtx);
+		return;
+	}
+
+	if (is_valid_ether_addr(priv->bssid))
+		at76_join(priv);
+
+	priv->scanning = false;
+
+	mutex_unlock(&priv->mtx);
+
+	ieee80211_scan_completed(priv->hw, &info);
+
+	ieee80211_wake_queues(priv->hw);
+}
+
+static int at76_hw_scan(struct ieee80211_hw *hw,
+			struct ieee80211_vif *vif,
+			struct ieee80211_scan_request *hw_req)
+{
+	struct cfg80211_scan_request *req = &hw_req->req;
+	struct at76_priv *priv = hw->priv;
+	struct at76_req_scan scan;
+	u8 *ssid = NULL;
+	int ret, len = 0;
+
+	at76_dbg(DBG_MAC80211, "%s():", __func__);
+
+	if (priv->device_unplugged)
+		return 0;
+
+	mutex_lock(&priv->mtx);
+
+	ieee80211_stop_queues(hw);
+
+	memset(&scan, 0, sizeof(struct at76_req_scan));
+	eth_broadcast_addr(scan.bssid);
+
+	if (req->n_ssids) {
+		scan.scan_type = SCAN_TYPE_ACTIVE;
+		ssid = req->ssids[0].ssid;
+		len = req->ssids[0].ssid_len;
+	} else {
+		scan.scan_type = SCAN_TYPE_PASSIVE;
+	}
+
+	if (len) {
+		memcpy(scan.essid, ssid, len);
+		scan.essid_size = len;
+	}
+
+	scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
+	scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
+	scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
+	scan.international_scan = 0;
+
+	at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__);
+	ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
+
+	if (ret < 0) {
+		wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret);
+		goto exit;
+	}
+
+	priv->scanning = true;
+	ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
+				     SCAN_POLL_INTERVAL);
+
+exit:
+	mutex_unlock(&priv->mtx);
+
+	return 0;
+}
+
+static int at76_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct at76_priv *priv = hw->priv;
+
+	at76_dbg(DBG_MAC80211, "%s(): channel %d",
+		 __func__, hw->conf.chandef.chan->hw_value);
+	at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
+
+	mutex_lock(&priv->mtx);
+
+	priv->channel = hw->conf.chandef.chan->hw_value;
+
+	if (is_valid_ether_addr(priv->bssid))
+		at76_join(priv);
+	else
+		at76_start_monitor(priv);
+
+	mutex_unlock(&priv->mtx);
+
+	return 0;
+}
+
+static void at76_bss_info_changed(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_bss_conf *conf,
+				  u64 changed)
+{
+	struct at76_priv *priv = hw->priv;
+
+	at76_dbg(DBG_MAC80211, "%s():", __func__);
+
+	if (!(changed & BSS_CHANGED_BSSID))
+		return;
+
+	at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
+
+	mutex_lock(&priv->mtx);
+
+	memcpy(priv->bssid, conf->bssid, ETH_ALEN);
+
+	if (is_valid_ether_addr(priv->bssid))
+		/* mac80211 is joining a bss */
+		at76_join(priv);
+
+	mutex_unlock(&priv->mtx);
+}
+
+/* must be atomic */
+static void at76_configure_filter(struct ieee80211_hw *hw,
+				  unsigned int changed_flags,
+				  unsigned int *total_flags, u64 multicast)
+{
+	struct at76_priv *priv = hw->priv;
+	int flags;
+
+	at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
+		 "total_flags=0x%08x",
+		 __func__, changed_flags, *total_flags);
+
+	flags = changed_flags & AT76_SUPPORTED_FILTERS;
+	*total_flags = AT76_SUPPORTED_FILTERS;
+
+	/* Bail out after updating flags to prevent a WARN_ON in mac80211. */
+	if (priv->device_unplugged)
+		return;
+
+	/* FIXME: access to priv->promisc should be protected with
+	 * priv->mtx, but it's impossible because this function needs to be
+	 * atomic */
+
+	if (flags && !priv->promisc) {
+		/* mac80211 wants us to enable promiscuous mode */
+		priv->promisc = 1;
+	} else if (!flags && priv->promisc) {
+		/* we need to disable promiscuous mode */
+		priv->promisc = 0;
+	} else
+		return;
+
+	ieee80211_queue_work(hw, &priv->work_set_promisc);
+}
+
+static int at76_set_wep(struct at76_priv *priv)
+{
+	int ret = 0;
+	struct mib_mac_wep *mib_data = &priv->mib_buf.data.wep_mib;
+
+	priv->mib_buf.type = MIB_MAC_WEP;
+	priv->mib_buf.size = sizeof(struct mib_mac_wep);
+	priv->mib_buf.index = 0;
+
+	memset(mib_data, 0, sizeof(*mib_data));
+
+	if (priv->wep_enabled) {
+		if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
+			mib_data->encryption_level = 2;
+		else
+			mib_data->encryption_level = 1;
+
+		/* always exclude unencrypted if WEP is active */
+		mib_data->exclude_unencrypted = 1;
+	} else {
+		mib_data->exclude_unencrypted = 0;
+		mib_data->encryption_level = 0;
+	}
+
+	mib_data->privacy_invoked = priv->wep_enabled;
+	mib_data->wep_default_key_id = priv->wep_key_id;
+	memcpy(mib_data->wep_default_keyvalue, priv->wep_keys,
+	       sizeof(priv->wep_keys));
+
+	ret = at76_set_mib(priv, &priv->mib_buf);
+
+	if (ret < 0)
+		wiphy_err(priv->hw->wiphy,
+			  "set_mib (wep) failed: %d\n", ret);
+
+	return ret;
+}
+
+static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+			struct ieee80211_key_conf *key)
+{
+	struct at76_priv *priv = hw->priv;
+
+	int i;
+
+	at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d "
+		 "key->keylen %d",
+		 __func__, cmd, key->cipher, key->keyidx, key->keylen);
+
+	if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) &&
+	    (key->cipher != WLAN_CIPHER_SUITE_WEP104))
+		return -EOPNOTSUPP;
+
+	key->hw_key_idx = key->keyidx;
+
+	mutex_lock(&priv->mtx);
+
+	switch (cmd) {
+	case SET_KEY:
+		memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen);
+		priv->wep_keys_len[key->keyidx] = key->keylen;
+
+		/* FIXME: find out how to do this properly */
+		priv->wep_key_id = key->keyidx;
+
+		break;
+	case DISABLE_KEY:
+	default:
+		priv->wep_keys_len[key->keyidx] = 0;
+		break;
+	}
+
+	priv->wep_enabled = 0;
+
+	for (i = 0; i < WEP_KEYS; i++) {
+		if (priv->wep_keys_len[i] != 0)
+			priv->wep_enabled = 1;
+	}
+
+	at76_set_wep(priv);
+
+	mutex_unlock(&priv->mtx);
+
+	return 0;
+}
+
+static const struct ieee80211_ops at76_ops = {
+	.tx = at76_mac80211_tx,
+	.wake_tx_queue = ieee80211_handle_wake_tx_queue,
+	.add_interface = at76_add_interface,
+	.remove_interface = at76_remove_interface,
+	.config = at76_config,
+	.bss_info_changed = at76_bss_info_changed,
+	.configure_filter = at76_configure_filter,
+	.start = at76_mac80211_start,
+	.stop = at76_mac80211_stop,
+	.hw_scan = at76_hw_scan,
+	.set_key = at76_set_key,
+};
+
+/* Allocate network device and initialize private data */
+static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
+{
+	struct ieee80211_hw *hw;
+	struct at76_priv *priv;
+
+	hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops);
+	if (!hw) {
+		printk(KERN_ERR DRIVER_NAME ": could not register"
+		       " ieee80211_hw\n");
+		return NULL;
+	}
+
+	priv = hw->priv;
+	priv->hw = hw;
+
+	priv->udev = udev;
+
+	mutex_init(&priv->mtx);
+	INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
+	INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
+	INIT_WORK(&priv->work_join_bssid, at76_work_join_bssid);
+	INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
+
+	tasklet_setup(&priv->rx_tasklet, at76_rx_tasklet);
+
+	priv->pm_mode = AT76_PM_OFF;
+	priv->pm_period = 0;
+
+	/* unit us */
+
+	return priv;
+}
+
+static int at76_alloc_urbs(struct at76_priv *priv,
+			   struct usb_interface *interface)
+{
+	struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
+	int i;
+	int buffer_size;
+	struct usb_host_interface *iface_desc;
+
+	at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
+
+	at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
+		 interface->cur_altsetting->desc.bNumEndpoints);
+
+	ep_in = NULL;
+	ep_out = NULL;
+	iface_desc = interface->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
+			 __func__, i, endpoint->bEndpointAddress,
+			 endpoint->bmAttributes);
+
+		if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
+			ep_in = endpoint;
+
+		if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
+			ep_out = endpoint;
+	}
+
+	if (!ep_in || !ep_out) {
+		dev_err(&interface->dev, "bulk endpoints missing\n");
+		return -ENXIO;
+	}
+
+	priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
+	priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);
+
+	priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!priv->rx_urb || !priv->tx_urb) {
+		dev_err(&interface->dev, "cannot allocate URB\n");
+		return -ENOMEM;
+	}
+
+	buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
+	priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (!priv->bulk_out_buffer)
+		return -ENOMEM;
+
+	at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
+
+	return 0;
+}
+
+static struct ieee80211_rate at76_rates[] = {
+	{ .bitrate = 10, .hw_value = TX_RATE_1MBIT, },
+	{ .bitrate = 20, .hw_value = TX_RATE_2MBIT, },
+	{ .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, },
+	{ .bitrate = 110, .hw_value = TX_RATE_11MBIT, },
+};
+
+static struct ieee80211_channel at76_channels[] = {
+	{ .center_freq = 2412, .hw_value = 1 },
+	{ .center_freq = 2417, .hw_value = 2 },
+	{ .center_freq = 2422, .hw_value = 3 },
+	{ .center_freq = 2427, .hw_value = 4 },
+	{ .center_freq = 2432, .hw_value = 5 },
+	{ .center_freq = 2437, .hw_value = 6 },
+	{ .center_freq = 2442, .hw_value = 7 },
+	{ .center_freq = 2447, .hw_value = 8 },
+	{ .center_freq = 2452, .hw_value = 9 },
+	{ .center_freq = 2457, .hw_value = 10 },
+	{ .center_freq = 2462, .hw_value = 11 },
+	{ .center_freq = 2467, .hw_value = 12 },
+	{ .center_freq = 2472, .hw_value = 13 },
+	{ .center_freq = 2484, .hw_value = 14 }
+};
+
+static struct ieee80211_supported_band at76_supported_band = {
+	.channels = at76_channels,
+	.n_channels = ARRAY_SIZE(at76_channels),
+	.bitrates = at76_rates,
+	.n_bitrates = ARRAY_SIZE(at76_rates),
+};
+
+/* Register network device and initialize the hardware */
+static int at76_init_new_device(struct at76_priv *priv,
+				struct usb_interface *interface)
+{
+	struct wiphy *wiphy;
+	size_t len;
+	int ret;
+
+	/* set up the endpoint information */
+	/* check out the endpoints */
+
+	at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
+		 interface->cur_altsetting->desc.bNumEndpoints);
+
+	ret = at76_alloc_urbs(priv, interface);
+	if (ret < 0)
+		goto exit;
+
+	/* MAC address */
+	ret = at76_get_hw_config(priv);
+	if (ret < 0) {
+		dev_err(&interface->dev, "cannot get MAC address\n");
+		goto exit;
+	}
+
+	priv->domain = at76_get_reg_domain(priv->regulatory_domain);
+
+	priv->channel = DEF_CHANNEL;
+	priv->iw_mode = IW_MODE_INFRA;
+	priv->rts_threshold = DEF_RTS_THRESHOLD;
+	priv->frag_threshold = DEF_FRAG_THRESHOLD;
+	priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
+	priv->txrate = TX_RATE_AUTO;
+	priv->preamble_type = PREAMBLE_TYPE_LONG;
+	priv->beacon_period = 100;
+	priv->auth_mode = WLAN_AUTH_OPEN;
+	priv->scan_min_time = DEF_SCAN_MIN_TIME;
+	priv->scan_max_time = DEF_SCAN_MAX_TIME;
+	priv->scan_mode = SCAN_TYPE_ACTIVE;
+	priv->device_unplugged = 0;
+
+	/* mac80211 initialisation */
+	wiphy = priv->hw->wiphy;
+	priv->hw->wiphy->max_scan_ssids = 1;
+	priv->hw->wiphy->max_scan_ie_len = 0;
+	priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	priv->hw->wiphy->bands[NL80211_BAND_2GHZ] = &at76_supported_band;
+	ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
+	ieee80211_hw_set(priv->hw, SIGNAL_UNSPEC);
+	priv->hw->max_signal = 100;
+
+	SET_IEEE80211_DEV(priv->hw, &interface->dev);
+	SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
+
+	len = sizeof(wiphy->fw_version);
+	snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
+		 priv->fw_version.major, priv->fw_version.minor,
+		 priv->fw_version.patch, priv->fw_version.build);
+
+	wiphy->hw_version = priv->board_type;
+
+	wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+	ret = ieee80211_register_hw(priv->hw);
+	if (ret) {
+		printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
+		       ret);
+		goto exit;
+	}
+
+	priv->mac80211_registered = 1;
+
+	wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
+		   dev_name(&interface->dev), priv->mac_addr,
+		   priv->fw_version.major, priv->fw_version.minor,
+		   priv->fw_version.patch, priv->fw_version.build);
+	wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n",
+		   priv->regulatory_domain, priv->domain->name);
+
+exit:
+	return ret;
+}
+
+static void at76_delete_device(struct at76_priv *priv)
+{
+	at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
+
+	/* The device is gone, don't bother turning it off */
+	priv->device_unplugged = 1;
+
+	tasklet_kill(&priv->rx_tasklet);
+
+	if (priv->mac80211_registered)
+		ieee80211_unregister_hw(priv->hw);
+
+	if (priv->tx_urb) {
+		usb_kill_urb(priv->tx_urb);
+		usb_free_urb(priv->tx_urb);
+	}
+	if (priv->rx_urb) {
+		usb_kill_urb(priv->rx_urb);
+		usb_free_urb(priv->rx_urb);
+	}
+
+	at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
+
+	kfree(priv->bulk_out_buffer);
+
+	del_timer_sync(&ledtrig_tx_timer);
+
+	kfree_skb(priv->rx_skb);
+
+	at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw",
+		 __func__);
+	ieee80211_free_hw(priv->hw);
+
+	at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
+}
+
+static int at76_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id)
+{
+	int ret;
+	struct at76_priv *priv;
+	struct fwentry *fwe;
+	struct usb_device *udev;
+	int op_mode;
+	int need_ext_fw = 0;
+	struct mib_fw_version *fwv = NULL;
+	int board_type = (int)id->driver_info;
+
+	udev = usb_get_dev(interface_to_usbdev(interface));
+
+	fwv = kmalloc(sizeof(*fwv), GFP_KERNEL);
+	if (!fwv) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	/* Load firmware into kernel memory */
+	fwe = at76_load_firmware(udev, board_type);
+	if (!fwe) {
+		ret = -ENOENT;
+		goto exit;
+	}
+
+	op_mode = at76_get_op_mode(udev);
+
+	at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
+
+	/* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
+	   we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
+
+	if (op_mode == OPMODE_HW_CONFIG_MODE) {
+		dev_err(&interface->dev,
+			"cannot handle a device in HW_CONFIG_MODE\n");
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
+	    && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
+		/* download internal firmware part */
+		dev_printk(KERN_DEBUG, &interface->dev,
+			   "downloading internal firmware\n");
+		ret = at76_load_internal_fw(udev, fwe);
+		if (ret < 0) {
+			dev_err(&interface->dev,
+				"error %d downloading internal firmware\n",
+				ret);
+		}
+		goto exit;
+	}
+
+	/* Internal firmware already inside the device.  Get firmware
+	 * version to test if external firmware is loaded.
+	 * This works only for newer firmware, e.g. the Intersil 0.90.x
+	 * says "control timeout on ep0in" and subsequent
+	 * at76_get_op_mode() fail too :-( */
+
+	/* if version >= 0.100.x.y or device with built-in flash we can
+	 * query the device for the fw version */
+	if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
+	    || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
+		ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
+		if (ret < 0 || (fwv->major | fwv->minor) == 0)
+			need_ext_fw = 1;
+	} else
+		/* No way to check firmware version, reload to be sure */
+		need_ext_fw = 1;
+
+	if (need_ext_fw) {
+		dev_printk(KERN_DEBUG, &interface->dev,
+			   "downloading external firmware\n");
+
+		ret = at76_load_external_fw(udev, fwe);
+		if (ret < 0)
+			goto exit;
+
+		/* Re-check firmware version */
+		ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
+		if (ret < 0) {
+			dev_err(&interface->dev,
+				"error %d getting firmware version\n", ret);
+			goto exit;
+		}
+	}
+
+	priv = at76_alloc_new_device(udev);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	usb_set_intfdata(interface, priv);
+
+	memcpy(&priv->fw_version, fwv, sizeof(struct mib_fw_version));
+	priv->board_type = board_type;
+
+	ret = at76_init_new_device(priv, interface);
+	if (ret < 0)
+		at76_delete_device(priv);
+
+exit:
+	kfree(fwv);
+	if (ret < 0)
+		usb_put_dev(udev);
+	return ret;
+}
+
+static void at76_disconnect(struct usb_interface *interface)
+{
+	struct at76_priv *priv;
+
+	priv = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	/* Disconnect after loading internal firmware */
+	if (!priv)
+		return;
+
+	wiphy_info(priv->hw->wiphy, "disconnecting\n");
+	at76_delete_device(priv);
+	usb_put_dev(priv->udev);
+	dev_info(&interface->dev, "disconnected\n");
+}
+
+/* Structure for registering this driver with the USB subsystem */
+static struct usb_driver at76_driver = {
+	.name = DRIVER_NAME,
+	.probe = at76_probe,
+	.disconnect = at76_disconnect,
+	.id_table = dev_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+static int __init at76_mod_init(void)
+{
+	int result;
+
+	printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&at76_driver);
+	if (result < 0)
+		printk(KERN_ERR DRIVER_NAME
+		       ": usb_register failed (status %d)\n", result);
+	else
+		led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
+	return result;
+}
+
+static void __exit at76_mod_exit(void)
+{
+	int i;
+
+	printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
+	usb_deregister(&at76_driver);
+	for (i = 0; i < ARRAY_SIZE(firmwares); i++)
+		release_firmware(firmwares[i].fw);
+	led_trigger_unregister_simple(ledtrig_tx);
+}
+
+module_param_named(debug, at76_debug, uint, 0600);
+MODULE_PARM_DESC(debug, "Debugging level");
+
+module_init(at76_mod_init);
+module_exit(at76_mod_exit);
+
+MODULE_AUTHOR("Oliver Kurth <oku@masqmail.cx>");
+MODULE_AUTHOR("Joerg Albert <joerg.albert@gmx.de>");
+MODULE_AUTHOR("Alex <alex@foogod.com>");
+MODULE_AUTHOR("Nick Jones");
+MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>");
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
+MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
+MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>");
+MODULE_AUTHOR("Sebastian Smolorz <sesmo@gmx.net>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/atmel/at76c50x-usb.h b/drivers/net/wireless/atmel/at76c50x-usb.h
new file mode 100644
index 0000000000..746e64dfd8
--- /dev/null
+++ b/drivers/net/wireless/atmel/at76c50x-usb.h
@@ -0,0 +1,462 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2002,2003 Oliver Kurth
+ *	     (c) 2003,2004 Joerg Albert <joerg.albert@gmx.de>
+ *	     (c) 2007 Guido Guenther <agx@sigxcpu.org>
+ *
+ * This driver was based on information from the Sourceforge driver
+ * released and maintained by Atmel:
+ *
+ *  http://sourceforge.net/projects/atmelwlandriver/
+ *
+ * Although the code was completely re-written,
+ * it would have been impossible without Atmel's decision to
+ * release an Open Source driver (unfortunately the firmware was
+ * kept binary only). Thanks for that decision to Atmel!
+ */
+
+#ifndef _AT76_USB_H
+#define _AT76_USB_H
+
+/* Board types */
+enum board_type {
+	BOARD_503_ISL3861 = 1,
+	BOARD_503_ISL3863 = 2,
+	BOARD_503 = 3,
+	BOARD_503_ACC = 4,
+	BOARD_505 = 5,
+	BOARD_505_2958 = 6,
+	BOARD_505A = 7,
+	BOARD_505AMX = 8
+};
+
+#define CMD_STATUS_IDLE				0x00
+#define CMD_STATUS_COMPLETE			0x01
+#define CMD_STATUS_UNKNOWN			0x02
+#define CMD_STATUS_INVALID_PARAMETER		0x03
+#define CMD_STATUS_FUNCTION_NOT_SUPPORTED	0x04
+#define CMD_STATUS_TIME_OUT			0x07
+#define CMD_STATUS_IN_PROGRESS			0x08
+#define CMD_STATUS_HOST_FAILURE			0xff
+#define CMD_STATUS_SCAN_FAILED			0xf0
+
+/* answers to get op mode */
+#define OPMODE_NONE				0x00
+#define OPMODE_NORMAL_NIC_WITH_FLASH		0x01
+#define OPMODE_HW_CONFIG_MODE			0x02
+#define OPMODE_DFU_MODE_WITH_FLASH		0x03
+#define OPMODE_NORMAL_NIC_WITHOUT_FLASH		0x04
+
+#define CMD_SET_MIB		0x01
+#define CMD_GET_MIB		0x02
+#define CMD_SCAN		0x03
+#define CMD_JOIN		0x04
+#define CMD_START_IBSS		0x05
+#define CMD_RADIO_ON		0x06
+#define CMD_RADIO_OFF		0x07
+#define CMD_STARTUP		0x0B
+
+#define MIB_LOCAL		0x01
+#define MIB_MAC_ADDR		0x02
+#define MIB_MAC			0x03
+#define MIB_MAC_MGMT		0x05
+#define MIB_MAC_WEP		0x06
+#define MIB_PHY			0x07
+#define MIB_FW_VERSION		0x08
+#define MIB_MDOMAIN		0x09
+
+#define ADHOC_MODE		1
+#define INFRASTRUCTURE_MODE	2
+
+/* values for struct mib_local, field preamble_type */
+#define PREAMBLE_TYPE_LONG	0
+#define PREAMBLE_TYPE_SHORT	1
+#define PREAMBLE_TYPE_AUTO	2
+
+/* values for tx_rate */
+#define TX_RATE_1MBIT		0
+#define TX_RATE_2MBIT		1
+#define TX_RATE_5_5MBIT 	2
+#define TX_RATE_11MBIT		3
+#define TX_RATE_AUTO		4
+
+/* power management modes */
+#define AT76_PM_OFF		1
+#define AT76_PM_ON		2
+#define AT76_PM_SMART		3
+
+struct hwcfg_r505 {
+	u8 cr39_values[14];
+	u8 reserved1[14];
+	u8 bb_cr[14];
+	u8 pidvid[4];
+	u8 mac_addr[ETH_ALEN];
+	u8 regulatory_domain;
+	u8 reserved2[14];
+	u8 cr15_values[14];
+	u8 reserved3[3];
+} __packed;
+
+struct hwcfg_rfmd {
+	u8 cr20_values[14];
+	u8 cr21_values[14];
+	u8 bb_cr[14];
+	u8 pidvid[4];
+	u8 mac_addr[ETH_ALEN];
+	u8 regulatory_domain;
+	u8 low_power_values[14];
+	u8 normal_power_values[14];
+	u8 reserved1[3];
+} __packed;
+
+struct hwcfg_intersil {
+	u8 mac_addr[ETH_ALEN];
+	u8 cr31_values[14];
+	u8 cr58_values[14];
+	u8 pidvid[4];
+	u8 regulatory_domain;
+	u8 reserved[1];
+} __packed;
+
+union at76_hwcfg {
+	struct hwcfg_intersil i;
+	struct hwcfg_rfmd r3;
+	struct hwcfg_r505 r5;
+};
+
+#define WEP_SMALL_KEY_LEN	(40 / 8)
+#define WEP_LARGE_KEY_LEN	(104 / 8)
+#define WEP_KEYS		(4)
+
+struct at76_card_config {
+	u8 exclude_unencrypted;
+	u8 promiscuous_mode;
+	u8 short_retry_limit;
+	u8 encryption_type;
+	__le16 rts_threshold;
+	__le16 fragmentation_threshold;	/* 256..2346 */
+	u8 basic_rate_set[4];
+	u8 auto_rate_fallback;	/* 0,1 */
+	u8 channel;
+	u8 privacy_invoked;
+	u8 wep_default_key_id;	/* 0..3 */
+	u8 current_ssid[32];
+	u8 wep_default_key_value[4][WEP_LARGE_KEY_LEN];
+	u8 ssid_len;
+	u8 short_preamble;
+	__le16 beacon_period;
+} __packed;
+
+struct at76_command {
+	u8 cmd;
+	u8 reserved;
+	__le16 size;
+	u8 data[];
+} __packed;
+
+/* Length of Atmel-specific Rx header before 802.11 frame */
+#define AT76_RX_HDRLEN offsetof(struct at76_rx_buffer, packet)
+
+struct at76_rx_buffer {
+	__le16 wlength;
+	u8 rx_rate;
+	u8 newbss;
+	u8 fragmentation;
+	u8 rssi;
+	u8 link_quality;
+	u8 noise_level;
+	__le32 rx_time;
+	u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
+} __packed;
+
+/* Length of Atmel-specific Tx header before 802.11 frame */
+#define AT76_TX_HDRLEN offsetof(struct at76_tx_buffer, packet)
+
+struct at76_tx_buffer {
+	__le16 wlength;
+	u8 tx_rate;
+	u8 padding;
+	u8 reserved[4];
+	u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
+} __packed;
+
+/* defines for scan_type below */
+#define SCAN_TYPE_ACTIVE	0
+#define SCAN_TYPE_PASSIVE	1
+
+struct at76_req_scan {
+	u8 bssid[ETH_ALEN];
+	u8 essid[32];
+	u8 scan_type;
+	u8 channel;
+	__le16 probe_delay;
+	__le16 min_channel_time;
+	__le16 max_channel_time;
+	u8 essid_size;
+	u8 international_scan;
+} __packed;
+
+struct at76_req_ibss {
+	u8 bssid[ETH_ALEN];
+	u8 essid[32];
+	u8 bss_type;
+	u8 channel;
+	u8 essid_size;
+	u8 reserved[3];
+} __packed;
+
+struct at76_req_join {
+	u8 bssid[ETH_ALEN];
+	u8 essid[32];
+	u8 bss_type;
+	u8 channel;
+	__le16 timeout;
+	u8 essid_size;
+	u8 reserved;
+} __packed;
+
+struct mib_local {
+	u16 reserved0;
+	u8 beacon_enable;
+	u8 txautorate_fallback;
+	u8 reserved1;
+	u8 ssid_size;
+	u8 promiscuous_mode;
+	u16 reserved2;
+	u8 preamble_type;
+	u16 reserved3;
+} __packed;
+
+struct mib_mac_addr {
+	u8 mac_addr[ETH_ALEN];
+	u8 res[2];		/* ??? */
+	u8 group_addr[4][ETH_ALEN];
+	u8 group_addr_status[4];
+} __packed;
+
+struct mib_mac {
+	__le32 max_tx_msdu_lifetime;
+	__le32 max_rx_lifetime;
+	__le16 frag_threshold;
+	__le16 rts_threshold;
+	__le16 cwmin;
+	__le16 cwmax;
+	u8 short_retry_time;
+	u8 long_retry_time;
+	u8 scan_type;		/* active or passive */
+	u8 scan_channel;
+	__le16 probe_delay;	/* delay before ProbeReq in active scan, RO */
+	__le16 min_channel_time;
+	__le16 max_channel_time;
+	__le16 listen_interval;
+	u8 desired_ssid[32];
+	u8 desired_bssid[ETH_ALEN];
+	u8 desired_bsstype;	/* ad-hoc or infrastructure */
+	u8 reserved2;
+} __packed;
+
+struct mib_mac_mgmt {
+	__le16 beacon_period;
+	__le16 CFP_max_duration;
+	__le16 medium_occupancy_limit;
+	__le16 station_id;	/* assoc id */
+	__le16 ATIM_window;
+	u8 CFP_mode;
+	u8 privacy_option_implemented;
+	u8 DTIM_period;
+	u8 CFP_period;
+	u8 current_bssid[ETH_ALEN];
+	u8 current_essid[32];
+	u8 current_bss_type;
+	u8 power_mgmt_mode;
+	/* rfmd and 505 */
+	u8 ibss_change;
+	u8 res;
+	u8 multi_domain_capability_implemented;
+	u8 multi_domain_capability_enabled;
+	u8 country_string[IEEE80211_COUNTRY_STRING_LEN];
+	u8 reserved[3];
+} __packed;
+
+struct mib_mac_wep {
+	u8 privacy_invoked;	/* 0 disable encr., 1 enable encr */
+	u8 wep_default_key_id;
+	u8 wep_key_mapping_len;
+	u8 exclude_unencrypted;
+	__le32 wep_icv_error_count;
+	__le32 wep_excluded_count;
+	u8 wep_default_keyvalue[WEP_KEYS][WEP_LARGE_KEY_LEN];
+	u8 encryption_level;	/* 1 for 40bit, 2 for 104bit encryption */
+} __packed;
+
+struct mib_phy {
+	__le32 ed_threshold;
+
+	__le16 slot_time;
+	__le16 sifs_time;
+	__le16 preamble_length;
+	__le16 plcp_header_length;
+	__le16 mpdu_max_length;
+	__le16 cca_mode_supported;
+
+	u8 operation_rate_set[4];
+	u8 channel_id;
+	u8 current_cca_mode;
+	u8 phy_type;
+	u8 current_reg_domain;
+} __packed;
+
+struct mib_fw_version {
+	u8 major;
+	u8 minor;
+	u8 patch;
+	u8 build;
+} __packed;
+
+struct mib_mdomain {
+	u8 tx_powerlevel[14];
+	u8 channel_list[14];	/* 0 for invalid channels */
+} __packed;
+
+struct set_mib_buffer {
+	u8 type;
+	u8 size;
+	u8 index;
+	u8 reserved;
+	union {
+		u8 byte;
+		__le16 word;
+		u8 addr[ETH_ALEN];
+		struct mib_mac_wep wep_mib;
+	} data;
+} __packed;
+
+struct at76_fw_header {
+	__le32 crc;		/* CRC32 of the whole image */
+	__le32 board_type;	/* firmware compatibility code */
+	u8 build;		/* firmware build number */
+	u8 patch;		/* firmware patch level */
+	u8 minor;		/* firmware minor version */
+	u8 major;		/* firmware major version */
+	__le32 str_offset;	/* offset of the copyright string */
+	__le32 int_fw_offset;	/* internal firmware image offset */
+	__le32 int_fw_len;	/* internal firmware image length */
+	__le32 ext_fw_offset;	/* external firmware image offset */
+	__le32 ext_fw_len;	/* external firmware image length */
+} __packed;
+
+/* a description of a regulatory domain and the allowed channels */
+struct reg_domain {
+	u16 code;
+	char const *name;
+	u32 channel_map;	/* if bit N is set, channel (N+1) is allowed */
+};
+
+/* Data for one loaded firmware file */
+struct fwentry {
+	const char *const fwname;
+	const struct firmware *fw;
+	int extfw_size;
+	int intfw_size;
+	/* pointer to loaded firmware, no need to free */
+	u8 *extfw;		/* external firmware, extfw_size bytes long */
+	u8 *intfw;		/* internal firmware, intfw_size bytes long */
+	enum board_type board_type;	/* board type */
+	struct mib_fw_version fw_version;
+	int loaded;		/* Loaded and parsed successfully */
+};
+
+struct at76_priv {
+	struct usb_device *udev;	/* USB device pointer */
+
+	struct sk_buff *rx_skb;	/* skbuff for receiving data */
+	struct sk_buff *tx_skb;	/* skbuff for transmitting data */
+	void *bulk_out_buffer;	/* buffer for sending data */
+
+	struct urb *tx_urb;	/* URB for sending data */
+	struct urb *rx_urb;	/* URB for receiving data */
+
+	unsigned int tx_pipe;	/* bulk out pipe */
+	unsigned int rx_pipe;	/* bulk in pipe */
+
+	struct mutex mtx;	/* locks this structure */
+
+	/* work queues */
+	struct work_struct work_set_promisc;
+	struct work_struct work_submit_rx;
+	struct work_struct work_join_bssid;
+	struct delayed_work dwork_hw_scan;
+
+	struct tasklet_struct rx_tasklet;
+
+	/* the WEP stuff */
+	int wep_enabled;	/* 1 if WEP is enabled */
+	int wep_key_id;		/* key id to be used */
+	u8 wep_keys[WEP_KEYS][WEP_LARGE_KEY_LEN];	/* WEP keys */
+	u8 wep_keys_len[WEP_KEYS];	/* length of WEP keys */
+
+	int channel;
+	int iw_mode;
+	u8 bssid[ETH_ALEN];
+	u8 essid[IW_ESSID_MAX_SIZE];
+	int essid_size;
+	int radio_on;
+	int promisc;
+
+	int preamble_type;	/* 0 - long, 1 - short, 2 - auto */
+	int auth_mode;		/* authentication type: 0 open, 1 shared key */
+	int txrate;		/* 0,1,2,3 = 1,2,5.5,11 Mbps, 4 is auto */
+	int frag_threshold;	/* threshold for fragmentation of tx packets */
+	int rts_threshold;	/* threshold for RTS mechanism */
+	int short_retry_limit;
+
+	int scan_min_time;	/* scan min channel time */
+	int scan_max_time;	/* scan max channel time */
+	int scan_mode;		/* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */
+	int scan_need_any;	/* if set, need to scan for any ESSID */
+	bool scanning;		/* if set, the scan is running */
+
+	u16 assoc_id;		/* current association ID, if associated */
+
+	u8 pm_mode;		/* power management mode */
+	u32 pm_period;		/* power management period in microseconds */
+
+	struct reg_domain const *domain;	/* reg domain description */
+
+	/* These fields contain HW config provided by the device (not all of
+	 * these fields are used by all board types) */
+	u8 mac_addr[ETH_ALEN];
+	u8 regulatory_domain;
+
+	struct at76_card_config card_config;
+
+	enum board_type board_type;
+	struct mib_fw_version fw_version;
+
+	unsigned int device_unplugged:1;
+	unsigned int netdev_registered:1;
+	struct set_mib_buffer mib_buf;	/* global buffer for set_mib calls */
+
+	int beacon_period;	/* period of mgmt beacons, Kus */
+
+	struct ieee80211_hw *hw;
+	int mac80211_registered;
+};
+
+#define AT76_SUPPORTED_FILTERS 0
+
+#define SCAN_POLL_INTERVAL	(HZ / 4)
+
+#define CMD_COMPLETION_TIMEOUT	(5 * HZ)
+
+#define DEF_RTS_THRESHOLD	1536
+#define DEF_FRAG_THRESHOLD	1536
+#define DEF_SHORT_RETRY_LIMIT	8
+#define DEF_CHANNEL		10
+#define DEF_SCAN_MIN_TIME	10
+#define DEF_SCAN_MAX_TIME	120
+
+/* the max padding size for tx in bytes (see calc_padding) */
+#define MAX_PADDING_SIZE	53
+
+#endif				/* _AT76_USB_H */
diff --git a/drivers/net/wireless/atmel/atmel.c b/drivers/net/wireless/atmel/atmel.c
new file mode 100644
index 0000000000..7c2d1c5881
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel.c
@@ -0,0 +1,4524 @@
+/*** -*- linux-c -*- **********************************************************
+
+     Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+	Copyright 2000-2001 ATMEL Corporation.
+	Copyright 2003-2004 Simon Kelley.
+
+    This code was developed from version 2.1.1 of the Atmel drivers,
+    released by Atmel corp. under the GPL in December 2002. It also
+    includes code from the Linux aironet drivers (C) Benjamin Reed,
+    and the Linux PCMCIA package, (C) David Hinds and the Linux wireless
+    extensions, (C) Jean Tourrilhes.
+
+    The firmware module for reading the MAC address of the card comes from
+    net.russotto.AtmelMACFW, written by Matthew T. Russotto and copyright
+    by him. net.russotto.AtmelMACFW is used under the GPL license version 2.
+    This file contains the module in binary form and, under the terms
+    of the GPL, in source form. The source is located at the end of the file.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This software is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with Atmel wireless lan drivers; if not, see
+    <http://www.gnu.org/licenses/>.
+
+    For all queries about this code, please contact the current author,
+    Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
+
+    Credit is due to HP UK and Cambridge Online Systems Ltd for supplying
+    hardware used during development of this driver.
+
+******************************************************************************/
+
+#include <linux/interrupt.h>
+
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <linux/crc32.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <net/cfg80211.h>
+#include "atmel.h"
+
+#define DRIVER_MAJOR 0
+#define DRIVER_MINOR 98
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+
+/* The name of the firmware file to be loaded
+   over-rides any automatic selection */
+static char *firmware = NULL;
+module_param(firmware, charp, 0);
+
+/* table of firmware file names */
+static struct {
+	AtmelFWType fw_type;
+	const char *fw_file;
+	const char *fw_file_ext;
+} fw_table[] = {
+	{ ATMEL_FW_TYPE_502,		"atmel_at76c502",	"bin" },
+	{ ATMEL_FW_TYPE_502D,		"atmel_at76c502d",	"bin" },
+	{ ATMEL_FW_TYPE_502E,		"atmel_at76c502e",	"bin" },
+	{ ATMEL_FW_TYPE_502_3COM,	"atmel_at76c502_3com",	"bin" },
+	{ ATMEL_FW_TYPE_504,		"atmel_at76c504",	"bin" },
+	{ ATMEL_FW_TYPE_504_2958,	"atmel_at76c504_2958",	"bin" },
+	{ ATMEL_FW_TYPE_504A_2958,	"atmel_at76c504a_2958",	"bin" },
+	{ ATMEL_FW_TYPE_506,		"atmel_at76c506",	"bin" },
+	{ ATMEL_FW_TYPE_NONE,		NULL,			NULL }
+};
+MODULE_FIRMWARE("atmel_at76c502-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502.bin");
+MODULE_FIRMWARE("atmel_at76c502d-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502d.bin");
+MODULE_FIRMWARE("atmel_at76c502e-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502e.bin");
+MODULE_FIRMWARE("atmel_at76c502_3com-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502_3com.bin");
+MODULE_FIRMWARE("atmel_at76c504-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504.bin");
+MODULE_FIRMWARE("atmel_at76c504_2958-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504_2958.bin");
+MODULE_FIRMWARE("atmel_at76c504a_2958-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504a_2958.bin");
+MODULE_FIRMWARE("atmel_at76c506-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c506.bin");
+
+#define MAX_SSID_LENGTH 32
+#define MGMT_JIFFIES (256 * HZ / 100)
+
+#define MAX_BSS_ENTRIES	64
+
+/* registers */
+#define GCR  0x00    /* (SIR0)  General Configuration Register */
+#define BSR  0x02    /* (SIR1)  Bank Switching Select Register */
+#define AR   0x04
+#define DR   0x08
+#define MR1  0x12    /* Mirror Register 1 */
+#define MR2  0x14    /* Mirror Register 2 */
+#define MR3  0x16    /* Mirror Register 3 */
+#define MR4  0x18    /* Mirror Register 4 */
+
+#define GPR1                            0x0c
+#define GPR2                            0x0e
+#define GPR3                            0x10
+/*
+ * Constants for the GCR register.
+ */
+#define GCR_REMAP     0x0400          /* Remap internal SRAM to 0 */
+#define GCR_SWRES     0x0080          /* BIU reset (ARM and PAI are NOT reset) */
+#define GCR_CORES     0x0060          /* Core Reset (ARM and PAI are reset) */
+#define GCR_ENINT     0x0002          /* Enable Interrupts */
+#define GCR_ACKINT    0x0008          /* Acknowledge Interrupts */
+
+#define BSS_SRAM      0x0200          /* AMBA module selection --> SRAM */
+#define BSS_IRAM      0x0100          /* AMBA module selection --> IRAM */
+/*
+ *Constants for the MR registers.
+ */
+#define MAC_INIT_COMPLETE       0x0001        /* MAC init has been completed */
+#define MAC_BOOT_COMPLETE       0x0010        /* MAC boot has been completed */
+#define MAC_INIT_OK             0x0002        /* MAC boot has been completed */
+
+#define MIB_MAX_DATA_BYTES    212
+#define MIB_HEADER_SIZE       4    /* first four fields */
+
+struct get_set_mib {
+	u8 type;
+	u8 size;
+	u8 index;
+	u8 reserved;
+	u8 data[MIB_MAX_DATA_BYTES];
+};
+
+struct rx_desc {
+	u32          Next;
+	u16          MsduPos;
+	u16          MsduSize;
+
+	u8           State;
+	u8           Status;
+	u8           Rate;
+	u8           Rssi;
+	u8           LinkQuality;
+	u8           PreambleType;
+	u16          Duration;
+	u32          RxTime;
+};
+
+#define RX_DESC_FLAG_VALID       0x80
+#define RX_DESC_FLAG_CONSUMED    0x40
+#define RX_DESC_FLAG_IDLE        0x00
+
+#define RX_STATUS_SUCCESS        0x00
+
+#define RX_DESC_MSDU_POS_OFFSET      4
+#define RX_DESC_MSDU_SIZE_OFFSET     6
+#define RX_DESC_FLAGS_OFFSET         8
+#define RX_DESC_STATUS_OFFSET        9
+#define RX_DESC_RSSI_OFFSET          11
+#define RX_DESC_LINK_QUALITY_OFFSET  12
+#define RX_DESC_PREAMBLE_TYPE_OFFSET 13
+#define RX_DESC_DURATION_OFFSET      14
+#define RX_DESC_RX_TIME_OFFSET       16
+
+struct tx_desc {
+	u32       NextDescriptor;
+	u16       TxStartOfFrame;
+	u16       TxLength;
+
+	u8        TxState;
+	u8        TxStatus;
+	u8        RetryCount;
+
+	u8        TxRate;
+
+	u8        KeyIndex;
+	u8        ChiperType;
+	u8        ChipreLength;
+	u8        Reserved1;
+
+	u8        Reserved;
+	u8        PacketType;
+	u16       HostTxLength;
+};
+
+#define TX_DESC_NEXT_OFFSET          0
+#define TX_DESC_POS_OFFSET           4
+#define TX_DESC_SIZE_OFFSET          6
+#define TX_DESC_FLAGS_OFFSET         8
+#define TX_DESC_STATUS_OFFSET        9
+#define TX_DESC_RETRY_OFFSET         10
+#define TX_DESC_RATE_OFFSET          11
+#define TX_DESC_KEY_INDEX_OFFSET     12
+#define TX_DESC_CIPHER_TYPE_OFFSET   13
+#define TX_DESC_CIPHER_LENGTH_OFFSET 14
+#define TX_DESC_PACKET_TYPE_OFFSET   17
+#define TX_DESC_HOST_LENGTH_OFFSET   18
+
+/*
+ * Host-MAC interface
+ */
+
+#define TX_STATUS_SUCCESS       0x00
+
+#define TX_FIRM_OWN             0x80
+#define TX_DONE                 0x40
+
+#define TX_ERROR                0x01
+
+#define TX_PACKET_TYPE_DATA     0x01
+#define TX_PACKET_TYPE_MGMT     0x02
+
+#define ISR_EMPTY               0x00        /* no bits set in ISR */
+#define ISR_TxCOMPLETE          0x01        /* packet transmitted */
+#define ISR_RxCOMPLETE          0x02        /* packet received */
+#define ISR_RxFRAMELOST         0x04        /* Rx Frame lost */
+#define ISR_FATAL_ERROR         0x08        /* Fatal error */
+#define ISR_COMMAND_COMPLETE    0x10        /* command completed */
+#define ISR_OUT_OF_RANGE        0x20        /* command completed */
+#define ISR_IBSS_MERGE          0x40        /* (4.1.2.30): IBSS merge */
+#define ISR_GENERIC_IRQ         0x80
+
+#define Local_Mib_Type          0x01
+#define Mac_Address_Mib_Type    0x02
+#define Mac_Mib_Type            0x03
+#define Statistics_Mib_Type     0x04
+#define Mac_Mgmt_Mib_Type       0x05
+#define Mac_Wep_Mib_Type        0x06
+#define Phy_Mib_Type            0x07
+#define Multi_Domain_MIB        0x08
+
+#define MAC_MGMT_MIB_CUR_BSSID_POS            14
+#define MAC_MIB_FRAG_THRESHOLD_POS            8
+#define MAC_MIB_RTS_THRESHOLD_POS             10
+#define MAC_MIB_SHORT_RETRY_POS               16
+#define MAC_MIB_LONG_RETRY_POS                17
+#define MAC_MIB_SHORT_RETRY_LIMIT_POS         16
+#define MAC_MGMT_MIB_BEACON_PER_POS           0
+#define MAC_MGMT_MIB_STATION_ID_POS           6
+#define MAC_MGMT_MIB_CUR_PRIVACY_POS          11
+#define MAC_MGMT_MIB_CUR_BSSID_POS            14
+#define MAC_MGMT_MIB_PS_MODE_POS              53
+#define MAC_MGMT_MIB_LISTEN_INTERVAL_POS      54
+#define MAC_MGMT_MIB_MULTI_DOMAIN_IMPLEMENTED 56
+#define MAC_MGMT_MIB_MULTI_DOMAIN_ENABLED     57
+#define PHY_MIB_CHANNEL_POS                   14
+#define PHY_MIB_RATE_SET_POS                  20
+#define PHY_MIB_REG_DOMAIN_POS                26
+#define LOCAL_MIB_AUTO_TX_RATE_POS            3
+#define LOCAL_MIB_SSID_SIZE                   5
+#define LOCAL_MIB_TX_PROMISCUOUS_POS          6
+#define LOCAL_MIB_TX_MGMT_RATE_POS            7
+#define LOCAL_MIB_TX_CONTROL_RATE_POS         8
+#define LOCAL_MIB_PREAMBLE_TYPE               9
+#define MAC_ADDR_MIB_MAC_ADDR_POS             0
+
+#define         CMD_Set_MIB_Vars              0x01
+#define         CMD_Get_MIB_Vars              0x02
+#define         CMD_Scan                      0x03
+#define         CMD_Join                      0x04
+#define         CMD_Start                     0x05
+#define         CMD_EnableRadio               0x06
+#define         CMD_DisableRadio              0x07
+#define         CMD_SiteSurvey                0x0B
+
+#define         CMD_STATUS_IDLE                   0x00
+#define         CMD_STATUS_COMPLETE               0x01
+#define         CMD_STATUS_UNKNOWN                0x02
+#define         CMD_STATUS_INVALID_PARAMETER      0x03
+#define         CMD_STATUS_FUNCTION_NOT_SUPPORTED 0x04
+#define         CMD_STATUS_TIME_OUT               0x07
+#define         CMD_STATUS_IN_PROGRESS            0x08
+#define         CMD_STATUS_REJECTED_RADIO_OFF     0x09
+#define         CMD_STATUS_HOST_ERROR             0xFF
+#define         CMD_STATUS_BUSY                   0xFE
+
+#define CMD_BLOCK_COMMAND_OFFSET        0
+#define CMD_BLOCK_STATUS_OFFSET         1
+#define CMD_BLOCK_PARAMETERS_OFFSET     4
+
+#define SCAN_OPTIONS_SITE_SURVEY        0x80
+
+#define MGMT_FRAME_BODY_OFFSET		24
+#define MAX_AUTHENTICATION_RETRIES	3
+#define MAX_ASSOCIATION_RETRIES		3
+
+#define AUTHENTICATION_RESPONSE_TIME_OUT  1000
+
+#define MAX_WIRELESS_BODY  2316 /* mtu is 2312, CRC is 4 */
+#define LOOP_RETRY_LIMIT   500000
+
+#define ACTIVE_MODE	1
+#define PS_MODE		2
+
+#define MAX_ENCRYPTION_KEYS 4
+#define MAX_ENCRYPTION_KEY_SIZE 40
+
+/*
+ * 802.11 related definitions
+ */
+
+/*
+ * Regulatory Domains
+ */
+
+#define REG_DOMAIN_FCC		0x10	/* Channels	1-11	USA				*/
+#define REG_DOMAIN_DOC		0x20	/* Channel	1-11	Canada				*/
+#define REG_DOMAIN_ETSI		0x30	/* Channel	1-13	Europe (ex Spain/France)	*/
+#define REG_DOMAIN_SPAIN	0x31	/* Channel	10-11	Spain				*/
+#define REG_DOMAIN_FRANCE	0x32	/* Channel	10-13	France				*/
+#define REG_DOMAIN_MKK		0x40	/* Channel	14	Japan				*/
+#define REG_DOMAIN_MKK1		0x41	/* Channel	1-14	Japan(MKK1)			*/
+#define REG_DOMAIN_ISRAEL	0x50	/* Channel	3-9	ISRAEL				*/
+
+#define BSS_TYPE_AD_HOC		1
+#define BSS_TYPE_INFRASTRUCTURE 2
+
+#define SCAN_TYPE_ACTIVE	0
+#define SCAN_TYPE_PASSIVE	1
+
+#define LONG_PREAMBLE		0
+#define SHORT_PREAMBLE		1
+#define AUTO_PREAMBLE		2
+
+#define DATA_FRAME_WS_HEADER_SIZE   30
+
+/* promiscuous mode control */
+#define PROM_MODE_OFF			0x0
+#define PROM_MODE_UNKNOWN		0x1
+#define PROM_MODE_CRC_FAILED		0x2
+#define PROM_MODE_DUPLICATED		0x4
+#define PROM_MODE_MGMT			0x8
+#define PROM_MODE_CTRL			0x10
+#define PROM_MODE_BAD_PROTOCOL		0x20
+
+#define IFACE_INT_STATUS_OFFSET		0
+#define IFACE_INT_MASK_OFFSET		1
+#define IFACE_LOCKOUT_HOST_OFFSET	2
+#define IFACE_LOCKOUT_MAC_OFFSET	3
+#define IFACE_FUNC_CTRL_OFFSET		28
+#define IFACE_MAC_STAT_OFFSET		30
+#define IFACE_GENERIC_INT_TYPE_OFFSET	32
+
+#define CIPHER_SUITE_NONE     0
+#define CIPHER_SUITE_WEP_64   1
+#define CIPHER_SUITE_TKIP     2
+#define CIPHER_SUITE_AES      3
+#define CIPHER_SUITE_CCX      4
+#define CIPHER_SUITE_WEP_128  5
+
+/*
+ * IFACE MACROS & definitions
+ */
+
+/*
+ * FuncCtrl field:
+ */
+#define FUNC_CTRL_TxENABLE		0x10
+#define FUNC_CTRL_RxENABLE		0x20
+#define FUNC_CTRL_INIT_COMPLETE		0x01
+
+/* A stub firmware image which reads the MAC address from NVRAM on the card.
+   For copyright information and source see the end of this file. */
+static u8 mac_reader[] = {
+	0x06, 0x00, 0x00, 0xea, 0x04, 0x00, 0x00, 0xea, 0x03, 0x00, 0x00, 0xea, 0x02, 0x00, 0x00, 0xea,
+	0x01, 0x00, 0x00, 0xea, 0x00, 0x00, 0x00, 0xea, 0xff, 0xff, 0xff, 0xea, 0xfe, 0xff, 0xff, 0xea,
+	0xd3, 0x00, 0xa0, 0xe3, 0x00, 0xf0, 0x21, 0xe1, 0x0e, 0x04, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3,
+	0x81, 0x11, 0xa0, 0xe1, 0x00, 0x10, 0x81, 0xe3, 0x00, 0x10, 0x80, 0xe5, 0x1c, 0x10, 0x90, 0xe5,
+	0x10, 0x10, 0xc1, 0xe3, 0x1c, 0x10, 0x80, 0xe5, 0x01, 0x10, 0xa0, 0xe3, 0x08, 0x10, 0x80, 0xe5,
+	0x02, 0x03, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3, 0xb0, 0x10, 0xc0, 0xe1, 0xb4, 0x10, 0xc0, 0xe1,
+	0xb8, 0x10, 0xc0, 0xe1, 0xbc, 0x10, 0xc0, 0xe1, 0x56, 0xdc, 0xa0, 0xe3, 0x21, 0x00, 0x00, 0xeb,
+	0x0a, 0x00, 0xa0, 0xe3, 0x1a, 0x00, 0x00, 0xeb, 0x10, 0x00, 0x00, 0xeb, 0x07, 0x00, 0x00, 0xeb,
+	0x02, 0x03, 0xa0, 0xe3, 0x02, 0x14, 0xa0, 0xe3, 0xb4, 0x10, 0xc0, 0xe1, 0x4c, 0x10, 0x9f, 0xe5,
+	0xbc, 0x10, 0xc0, 0xe1, 0x10, 0x10, 0xa0, 0xe3, 0xb8, 0x10, 0xc0, 0xe1, 0xfe, 0xff, 0xff, 0xea,
+	0x00, 0x40, 0x2d, 0xe9, 0x00, 0x20, 0xa0, 0xe3, 0x02, 0x3c, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3,
+	0x28, 0x00, 0x9f, 0xe5, 0x37, 0x00, 0x00, 0xeb, 0x00, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1,
+	0x00, 0x40, 0x2d, 0xe9, 0x12, 0x2e, 0xa0, 0xe3, 0x06, 0x30, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3,
+	0x02, 0x04, 0xa0, 0xe3, 0x2f, 0x00, 0x00, 0xeb, 0x00, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1,
+	0x00, 0x02, 0x00, 0x02, 0x80, 0x01, 0x90, 0xe0, 0x01, 0x00, 0x00, 0x0a, 0x01, 0x00, 0x50, 0xe2,
+	0xfc, 0xff, 0xff, 0xea, 0x1e, 0xff, 0x2f, 0xe1, 0x80, 0x10, 0xa0, 0xe3, 0xf3, 0x06, 0xa0, 0xe3,
+	0x00, 0x10, 0x80, 0xe5, 0x00, 0x10, 0xa0, 0xe3, 0x00, 0x10, 0x80, 0xe5, 0x01, 0x10, 0xa0, 0xe3,
+	0x04, 0x10, 0x80, 0xe5, 0x00, 0x10, 0x80, 0xe5, 0x0e, 0x34, 0xa0, 0xe3, 0x1c, 0x10, 0x93, 0xe5,
+	0x02, 0x1a, 0x81, 0xe3, 0x1c, 0x10, 0x83, 0xe5, 0x58, 0x11, 0x9f, 0xe5, 0x30, 0x10, 0x80, 0xe5,
+	0x54, 0x11, 0x9f, 0xe5, 0x34, 0x10, 0x80, 0xe5, 0x38, 0x10, 0x80, 0xe5, 0x3c, 0x10, 0x80, 0xe5,
+	0x10, 0x10, 0x90, 0xe5, 0x08, 0x00, 0x90, 0xe5, 0x1e, 0xff, 0x2f, 0xe1, 0xf3, 0x16, 0xa0, 0xe3,
+	0x08, 0x00, 0x91, 0xe5, 0x05, 0x00, 0xa0, 0xe3, 0x0c, 0x00, 0x81, 0xe5, 0x10, 0x00, 0x91, 0xe5,
+	0x02, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0xff, 0x00, 0xa0, 0xe3, 0x0c, 0x00, 0x81, 0xe5,
+	0x10, 0x00, 0x91, 0xe5, 0x02, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0x08, 0x00, 0x91, 0xe5,
+	0x10, 0x00, 0x91, 0xe5, 0x01, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0x08, 0x00, 0x91, 0xe5,
+	0xff, 0x00, 0x00, 0xe2, 0x1e, 0xff, 0x2f, 0xe1, 0x30, 0x40, 0x2d, 0xe9, 0x00, 0x50, 0xa0, 0xe1,
+	0x03, 0x40, 0xa0, 0xe1, 0xa2, 0x02, 0xa0, 0xe1, 0x08, 0x00, 0x00, 0xe2, 0x03, 0x00, 0x80, 0xe2,
+	0xd8, 0x10, 0x9f, 0xe5, 0x00, 0x00, 0xc1, 0xe5, 0x01, 0x20, 0xc1, 0xe5, 0xe2, 0xff, 0xff, 0xeb,
+	0x01, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x1a, 0x14, 0x00, 0xa0, 0xe3, 0xc4, 0xff, 0xff, 0xeb,
+	0x04, 0x20, 0xa0, 0xe1, 0x05, 0x10, 0xa0, 0xe1, 0x02, 0x00, 0xa0, 0xe3, 0x01, 0x00, 0x00, 0xeb,
+	0x30, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1, 0x70, 0x40, 0x2d, 0xe9, 0xf3, 0x46, 0xa0, 0xe3,
+	0x00, 0x30, 0xa0, 0xe3, 0x00, 0x00, 0x50, 0xe3, 0x08, 0x00, 0x00, 0x9a, 0x8c, 0x50, 0x9f, 0xe5,
+	0x03, 0x60, 0xd5, 0xe7, 0x0c, 0x60, 0x84, 0xe5, 0x10, 0x60, 0x94, 0xe5, 0x02, 0x00, 0x16, 0xe3,
+	0xfc, 0xff, 0xff, 0x0a, 0x01, 0x30, 0x83, 0xe2, 0x00, 0x00, 0x53, 0xe1, 0xf7, 0xff, 0xff, 0x3a,
+	0xff, 0x30, 0xa0, 0xe3, 0x0c, 0x30, 0x84, 0xe5, 0x08, 0x00, 0x94, 0xe5, 0x10, 0x00, 0x94, 0xe5,
+	0x01, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0x08, 0x00, 0x94, 0xe5, 0x00, 0x00, 0xa0, 0xe3,
+	0x00, 0x00, 0x52, 0xe3, 0x0b, 0x00, 0x00, 0x9a, 0x10, 0x50, 0x94, 0xe5, 0x02, 0x00, 0x15, 0xe3,
+	0xfc, 0xff, 0xff, 0x0a, 0x0c, 0x30, 0x84, 0xe5, 0x10, 0x50, 0x94, 0xe5, 0x01, 0x00, 0x15, 0xe3,
+	0xfc, 0xff, 0xff, 0x0a, 0x08, 0x50, 0x94, 0xe5, 0x01, 0x50, 0xc1, 0xe4, 0x01, 0x00, 0x80, 0xe2,
+	0x02, 0x00, 0x50, 0xe1, 0xf3, 0xff, 0xff, 0x3a, 0xc8, 0x00, 0xa0, 0xe3, 0x98, 0xff, 0xff, 0xeb,
+	0x70, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1, 0x01, 0x0c, 0x00, 0x02, 0x01, 0x02, 0x00, 0x02,
+	0x00, 0x01, 0x00, 0x02
+};
+
+struct atmel_private {
+	void *card; /* Bus dependent structure varies for PCcard */
+	int (*present_callback)(void *); /* And callback which uses it */
+	char firmware_id[32];
+	AtmelFWType firmware_type;
+	u8 *firmware;
+	int firmware_length;
+	struct timer_list management_timer;
+	struct net_device *dev;
+	struct device *sys_dev;
+	struct iw_statistics wstats;
+	spinlock_t irqlock, timerlock;	/* spinlocks */
+	enum { BUS_TYPE_PCCARD, BUS_TYPE_PCI } bus_type;
+	enum {
+		CARD_TYPE_PARALLEL_FLASH,
+		CARD_TYPE_SPI_FLASH,
+		CARD_TYPE_EEPROM
+	} card_type;
+	int do_rx_crc; /* If we need to CRC incoming packets */
+	int probe_crc; /* set if we don't yet know */
+	int crc_ok_cnt, crc_ko_cnt; /* counters for probing */
+	u16 rx_desc_head;
+	u16 tx_desc_free, tx_desc_head, tx_desc_tail, tx_desc_previous;
+	u16 tx_free_mem, tx_buff_head, tx_buff_tail;
+
+	u16 frag_seq, frag_len, frag_no;
+	u8 frag_source[6];
+
+	u8 wep_is_on, default_key, exclude_unencrypted, encryption_level;
+	u8 group_cipher_suite, pairwise_cipher_suite;
+	u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
+	int wep_key_len[MAX_ENCRYPTION_KEYS];
+	int use_wpa, radio_on_broken; /* firmware dependent stuff. */
+
+	u16 host_info_base;
+	struct host_info_struct {
+		/* NB this is matched to the hardware, don't change. */
+		u8 volatile int_status;
+		u8 volatile int_mask;
+		u8 volatile lockout_host;
+		u8 volatile lockout_mac;
+
+		u16 tx_buff_pos;
+		u16 tx_buff_size;
+		u16 tx_desc_pos;
+		u16 tx_desc_count;
+
+		u16 rx_buff_pos;
+		u16 rx_buff_size;
+		u16 rx_desc_pos;
+		u16 rx_desc_count;
+
+		u16 build_version;
+		u16 command_pos;
+
+		u16 major_version;
+		u16 minor_version;
+
+		u16 func_ctrl;
+		u16 mac_status;
+		u16 generic_IRQ_type;
+		u8  reserved[2];
+	} host_info;
+
+	enum {
+		STATION_STATE_SCANNING,
+		STATION_STATE_JOINNING,
+		STATION_STATE_AUTHENTICATING,
+		STATION_STATE_ASSOCIATING,
+		STATION_STATE_READY,
+		STATION_STATE_REASSOCIATING,
+		STATION_STATE_DOWN,
+		STATION_STATE_MGMT_ERROR
+	} station_state;
+
+	int operating_mode, power_mode;
+	unsigned long last_qual;
+	int beacons_this_sec;
+	int channel;
+	int reg_domain, config_reg_domain;
+	int tx_rate;
+	int auto_tx_rate;
+	int rts_threshold;
+	int frag_threshold;
+	int long_retry, short_retry;
+	int preamble;
+	int default_beacon_period, beacon_period, listen_interval;
+	int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum;
+	int AuthenticationRequestRetryCnt, AssociationRequestRetryCnt, ReAssociationRequestRetryCnt;
+	enum {
+		SITE_SURVEY_IDLE,
+		SITE_SURVEY_IN_PROGRESS,
+		SITE_SURVEY_COMPLETED
+	} site_survey_state;
+	unsigned long last_survey;
+
+	int station_was_associated, station_is_associated;
+	int fast_scan;
+
+	struct bss_info {
+		int channel;
+		int SSIDsize;
+		int RSSI;
+		int UsingWEP;
+		int preamble;
+		int beacon_period;
+		int BSStype;
+		u8 BSSID[6];
+		u8 SSID[MAX_SSID_LENGTH];
+	} BSSinfo[MAX_BSS_ENTRIES];
+	int BSS_list_entries, current_BSS;
+	int connect_to_any_BSS;
+	int SSID_size, new_SSID_size;
+	u8 CurrentBSSID[6], BSSID[6];
+	u8 SSID[MAX_SSID_LENGTH], new_SSID[MAX_SSID_LENGTH];
+	u64 last_beacon_timestamp;
+	u8 rx_buf[MAX_WIRELESS_BODY];
+};
+
+static u8 atmel_basic_rates[4] = {0x82, 0x84, 0x0b, 0x16};
+
+static const struct {
+	int reg_domain;
+	int min, max;
+	char *name;
+} channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" },
+		      { REG_DOMAIN_DOC, 1, 11, "Canada" },
+		      { REG_DOMAIN_ETSI, 1, 13, "Europe" },
+		      { REG_DOMAIN_SPAIN, 10, 11, "Spain" },
+		      { REG_DOMAIN_FRANCE, 10, 13, "France" },
+		      { REG_DOMAIN_MKK, 14, 14, "MKK" },
+		      { REG_DOMAIN_MKK1, 1, 14, "MKK1" },
+		      { REG_DOMAIN_ISRAEL, 3, 9, "Israel"} };
+
+static void build_wpa_mib(struct atmel_private *priv);
+static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void atmel_copy_to_card(struct net_device *dev, u16 dest,
+			       const unsigned char *src, u16 len);
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest,
+			       u16 src, u16 len);
+static void atmel_set_gcr(struct net_device *dev, u16 mask);
+static void atmel_clear_gcr(struct net_device *dev, u16 mask);
+static int atmel_lock_mac(struct atmel_private *priv);
+static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data);
+static void atmel_command_irq(struct atmel_private *priv);
+static int atmel_validate_channel(struct atmel_private *priv, int channel);
+static void atmel_management_frame(struct atmel_private *priv,
+				   struct ieee80211_hdr *header,
+				   u16 frame_len, u8 rssi);
+static void atmel_management_timer(struct timer_list *t);
+static void atmel_send_command(struct atmel_private *priv, int command,
+			       void *cmd, int cmd_size);
+static int atmel_send_command_wait(struct atmel_private *priv, int command,
+				   void *cmd, int cmd_size);
+static void atmel_transmit_management_frame(struct atmel_private *priv,
+					    struct ieee80211_hdr *header,
+					    u8 *body, int body_len);
+
+static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index);
+static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index,
+			   u8 data);
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index,
+			    u16 data);
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index,
+			  const u8 *data, int data_len);
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index,
+			  u8 *data, int data_len);
+static void atmel_scan(struct atmel_private *priv, int specific_ssid);
+static void atmel_join_bss(struct atmel_private *priv, int bss_index);
+static void atmel_smooth_qual(struct atmel_private *priv);
+static void atmel_writeAR(struct net_device *dev, u16 data);
+static int probe_atmel_card(struct net_device *dev);
+static int reset_atmel_card(struct net_device *dev);
+static void atmel_enter_state(struct atmel_private *priv, int new_state);
+int atmel_open (struct net_device *dev);
+
+static inline u16 atmel_hi(struct atmel_private *priv, u16 offset)
+{
+	return priv->host_info_base + offset;
+}
+
+static inline u16 atmel_co(struct atmel_private *priv, u16 offset)
+{
+	return priv->host_info.command_pos + offset;
+}
+
+static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc)
+{
+	return priv->host_info.rx_desc_pos + (sizeof(struct rx_desc) * desc) + offset;
+}
+
+static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc)
+{
+	return priv->host_info.tx_desc_pos + (sizeof(struct tx_desc) * desc) + offset;
+}
+
+static inline u8 atmel_read8(struct net_device *dev, u16 offset)
+{
+	return inb(dev->base_addr + offset);
+}
+
+static inline void atmel_write8(struct net_device *dev, u16 offset, u8 data)
+{
+	outb(data, dev->base_addr + offset);
+}
+
+static inline u16 atmel_read16(struct net_device *dev, u16 offset)
+{
+	return inw(dev->base_addr + offset);
+}
+
+static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data)
+{
+	outw(data, dev->base_addr + offset);
+}
+
+static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos)
+{
+	atmel_writeAR(priv->dev, pos);
+	return atmel_read8(priv->dev, DR);
+}
+
+static inline void atmel_wmem8(struct atmel_private *priv, u16 pos, u16 data)
+{
+	atmel_writeAR(priv->dev, pos);
+	atmel_write8(priv->dev, DR, data);
+}
+
+static inline u16 atmel_rmem16(struct atmel_private *priv, u16 pos)
+{
+	atmel_writeAR(priv->dev, pos);
+	return atmel_read16(priv->dev, DR);
+}
+
+static inline void atmel_wmem16(struct atmel_private *priv, u16 pos, u16 data)
+{
+	atmel_writeAR(priv->dev, pos);
+	atmel_write16(priv->dev, DR, data);
+}
+
+static const struct iw_handler_def atmel_handler_def;
+
+static void tx_done_irq(struct atmel_private *priv)
+{
+	int i;
+
+	for (i = 0;
+	     atmel_rmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head)) == TX_DONE &&
+		     i < priv->host_info.tx_desc_count;
+	     i++) {
+		u8 status = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_STATUS_OFFSET, priv->tx_desc_head));
+		u16 msdu_size = atmel_rmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_head));
+		u8 type = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_head));
+
+		atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head), 0);
+
+		priv->tx_free_mem += msdu_size;
+		priv->tx_desc_free++;
+
+		if (priv->tx_buff_head + msdu_size > (priv->host_info.tx_buff_pos + priv->host_info.tx_buff_size))
+			priv->tx_buff_head = 0;
+		else
+			priv->tx_buff_head += msdu_size;
+
+		if (priv->tx_desc_head < (priv->host_info.tx_desc_count - 1))
+			priv->tx_desc_head++ ;
+		else
+			priv->tx_desc_head = 0;
+
+		if (type == TX_PACKET_TYPE_DATA) {
+			if (status == TX_STATUS_SUCCESS)
+				priv->dev->stats.tx_packets++;
+			else
+				priv->dev->stats.tx_errors++;
+			netif_wake_queue(priv->dev);
+		}
+	}
+}
+
+static u16 find_tx_buff(struct atmel_private *priv, u16 len)
+{
+	u16 bottom_free = priv->host_info.tx_buff_size - priv->tx_buff_tail;
+
+	if (priv->tx_desc_free == 3 || priv->tx_free_mem < len)
+		return 0;
+
+	if (bottom_free >= len)
+		return priv->host_info.tx_buff_pos + priv->tx_buff_tail;
+
+	if (priv->tx_free_mem - bottom_free >= len) {
+		priv->tx_buff_tail = 0;
+		return priv->host_info.tx_buff_pos;
+	}
+
+	return 0;
+}
+
+static void tx_update_descriptor(struct atmel_private *priv, int is_bcast,
+				 u16 len, u16 buff, u8 type)
+{
+	atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, priv->tx_desc_tail), buff);
+	atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_tail), len);
+	if (!priv->use_wpa)
+		atmel_wmem16(priv, atmel_tx(priv, TX_DESC_HOST_LENGTH_OFFSET, priv->tx_desc_tail), len);
+	atmel_wmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_tail), type);
+	atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RATE_OFFSET, priv->tx_desc_tail), priv->tx_rate);
+	atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RETRY_OFFSET, priv->tx_desc_tail), 0);
+	if (priv->use_wpa) {
+		int cipher_type, cipher_length;
+		if (is_bcast) {
+			cipher_type = priv->group_cipher_suite;
+			if (cipher_type == CIPHER_SUITE_WEP_64 ||
+			    cipher_type == CIPHER_SUITE_WEP_128)
+				cipher_length = 8;
+			else if (cipher_type == CIPHER_SUITE_TKIP)
+				cipher_length = 12;
+			else if (priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_64 ||
+				 priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_128) {
+				cipher_type = priv->pairwise_cipher_suite;
+				cipher_length = 8;
+			} else {
+				cipher_type = CIPHER_SUITE_NONE;
+				cipher_length = 0;
+			}
+		} else {
+			cipher_type = priv->pairwise_cipher_suite;
+			if (cipher_type == CIPHER_SUITE_WEP_64 ||
+			    cipher_type == CIPHER_SUITE_WEP_128)
+				cipher_length = 8;
+			else if (cipher_type == CIPHER_SUITE_TKIP)
+				cipher_length = 12;
+			else if (priv->group_cipher_suite == CIPHER_SUITE_WEP_64 ||
+				 priv->group_cipher_suite == CIPHER_SUITE_WEP_128) {
+				cipher_type = priv->group_cipher_suite;
+				cipher_length = 8;
+			} else {
+				cipher_type = CIPHER_SUITE_NONE;
+				cipher_length = 0;
+			}
+		}
+
+		atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_TYPE_OFFSET, priv->tx_desc_tail),
+			    cipher_type);
+		atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_LENGTH_OFFSET, priv->tx_desc_tail),
+			    cipher_length);
+	}
+	atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_tail), 0x80000000L);
+	atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_tail), TX_FIRM_OWN);
+	if (priv->tx_desc_previous != priv->tx_desc_tail)
+		atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_previous), 0);
+	priv->tx_desc_previous = priv->tx_desc_tail;
+	if (priv->tx_desc_tail < (priv->host_info.tx_desc_count - 1))
+		priv->tx_desc_tail++;
+	else
+		priv->tx_desc_tail = 0;
+	priv->tx_desc_free--;
+	priv->tx_free_mem -= len;
+}
+
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+	struct ieee80211_hdr header;
+	unsigned long flags;
+	u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
+
+	if (priv->card && priv->present_callback &&
+	    !(*priv->present_callback)(priv->card)) {
+		dev->stats.tx_errors++;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	if (priv->station_state != STATION_STATE_READY) {
+		dev->stats.tx_errors++;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/* first ensure the timer func cannot run */
+	spin_lock_bh(&priv->timerlock);
+	/* then stop the hardware ISR */
+	spin_lock_irqsave(&priv->irqlock, flags);
+	/* nb doing the above in the opposite order will deadlock */
+
+	/* The Wireless Header is 30 bytes. In the Ethernet packet we "cut" the
+	   12 first bytes (containing DA/SA) and put them in the appropriate
+	   fields of the Wireless Header. Thus the packet length is then the
+	   initial + 18 (+30-12) */
+
+	if (!(buff = find_tx_buff(priv, len + 18))) {
+		dev->stats.tx_dropped++;
+		spin_unlock_irqrestore(&priv->irqlock, flags);
+		spin_unlock_bh(&priv->timerlock);
+		netif_stop_queue(dev);
+		return NETDEV_TX_BUSY;
+	}
+
+	frame_ctl = IEEE80211_FTYPE_DATA;
+	header.duration_id = 0;
+	header.seq_ctrl = 0;
+	if (priv->wep_is_on)
+		frame_ctl |= IEEE80211_FCTL_PROTECTED;
+	if (priv->operating_mode == IW_MODE_ADHOC) {
+		skb_copy_from_linear_data(skb, &header.addr1, ETH_ALEN);
+		memcpy(&header.addr2, dev->dev_addr, ETH_ALEN);
+		memcpy(&header.addr3, priv->BSSID, ETH_ALEN);
+	} else {
+		frame_ctl |= IEEE80211_FCTL_TODS;
+		memcpy(&header.addr1, priv->CurrentBSSID, ETH_ALEN);
+		memcpy(&header.addr2, dev->dev_addr, ETH_ALEN);
+		skb_copy_from_linear_data(skb, &header.addr3, ETH_ALEN);
+	}
+
+	if (priv->use_wpa)
+		memcpy(&header.addr4, rfc1042_header, ETH_ALEN);
+
+	header.frame_control = cpu_to_le16(frame_ctl);
+	/* Copy the wireless header into the card */
+	atmel_copy_to_card(dev, buff, (unsigned char *)&header, DATA_FRAME_WS_HEADER_SIZE);
+	/* Copy the packet sans its 802.3 header addresses which have been replaced */
+	atmel_copy_to_card(dev, buff + DATA_FRAME_WS_HEADER_SIZE, skb->data + 12, len - 12);
+	priv->tx_buff_tail += len - 12 + DATA_FRAME_WS_HEADER_SIZE;
+
+	/* low bit of first byte of destination tells us if broadcast */
+	tx_update_descriptor(priv, *(skb->data) & 0x01, len + 18, buff, TX_PACKET_TYPE_DATA);
+	dev->stats.tx_bytes += len;
+
+	spin_unlock_irqrestore(&priv->irqlock, flags);
+	spin_unlock_bh(&priv->timerlock);
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static void atmel_transmit_management_frame(struct atmel_private *priv,
+					    struct ieee80211_hdr *header,
+					    u8 *body, int body_len)
+{
+	u16 buff;
+	int len = MGMT_FRAME_BODY_OFFSET + body_len;
+
+	if (!(buff = find_tx_buff(priv, len)))
+		return;
+
+	atmel_copy_to_card(priv->dev, buff, (u8 *)header, MGMT_FRAME_BODY_OFFSET);
+	atmel_copy_to_card(priv->dev, buff + MGMT_FRAME_BODY_OFFSET, body, body_len);
+	priv->tx_buff_tail += len;
+	tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT);
+}
+
+static void fast_rx_path(struct atmel_private *priv,
+			 struct ieee80211_hdr *header,
+			 u16 msdu_size, u16 rx_packet_loc, u32 crc)
+{
+	/* fast path: unfragmented packet copy directly into skbuf */
+	u8 mac4[6];
+	struct sk_buff	*skb;
+	unsigned char *skbp;
+
+	/* get the final, mac 4 header field, this tells us encapsulation */
+	atmel_copy_to_host(priv->dev, mac4, rx_packet_loc + 24, 6);
+	msdu_size -= 6;
+
+	if (priv->do_rx_crc) {
+		crc = crc32_le(crc, mac4, 6);
+		msdu_size -= 4;
+	}
+
+	if (!(skb = dev_alloc_skb(msdu_size + 14))) {
+		priv->dev->stats.rx_dropped++;
+		return;
+	}
+
+	skb_reserve(skb, 2);
+	skbp = skb_put(skb, msdu_size + 12);
+	atmel_copy_to_host(priv->dev, skbp + 12, rx_packet_loc + 30, msdu_size);
+
+	if (priv->do_rx_crc) {
+		u32 netcrc;
+		crc = crc32_le(crc, skbp + 12, msdu_size);
+		atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + 30 + msdu_size, 4);
+		if ((crc ^ 0xffffffff) != netcrc) {
+			priv->dev->stats.rx_crc_errors++;
+			dev_kfree_skb(skb);
+			return;
+		}
+	}
+
+	memcpy(skbp, header->addr1, ETH_ALEN); /* destination address */
+	if (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FROMDS)
+		memcpy(&skbp[ETH_ALEN], header->addr3, ETH_ALEN);
+	else
+		memcpy(&skbp[ETH_ALEN], header->addr2, ETH_ALEN); /* source address */
+
+	skb->protocol = eth_type_trans(skb, priv->dev);
+	skb->ip_summed = CHECKSUM_NONE;
+	netif_rx(skb);
+	priv->dev->stats.rx_bytes += 12 + msdu_size;
+	priv->dev->stats.rx_packets++;
+}
+
+/* Test to see if the packet in card memory at packet_loc has a valid CRC
+   It doesn't matter that this is slow: it is only used to proble the first few
+   packets. */
+static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size)
+{
+	int i = msdu_size - 4;
+	u32 netcrc, crc = 0xffffffff;
+
+	if (msdu_size < 4)
+		return 0;
+
+	atmel_copy_to_host(priv->dev, (void *)&netcrc, packet_loc + i, 4);
+
+	atmel_writeAR(priv->dev, packet_loc);
+	while (i--) {
+		u8 octet = atmel_read8(priv->dev, DR);
+		crc = crc32_le(crc, &octet, 1);
+	}
+
+	return (crc ^ 0xffffffff) == netcrc;
+}
+
+static void frag_rx_path(struct atmel_private *priv,
+			 struct ieee80211_hdr *header,
+			 u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no,
+			 u8 frag_no, int more_frags)
+{
+	u8 mac4[ETH_ALEN];
+	u8 source[ETH_ALEN];
+	struct sk_buff *skb;
+
+	if (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FROMDS)
+		memcpy(source, header->addr3, ETH_ALEN);
+	else
+		memcpy(source, header->addr2, ETH_ALEN);
+
+	rx_packet_loc += 24; /* skip header */
+
+	if (priv->do_rx_crc)
+		msdu_size -= 4;
+
+	if (frag_no == 0) { /* first fragment */
+		atmel_copy_to_host(priv->dev, mac4, rx_packet_loc, ETH_ALEN);
+		msdu_size -= ETH_ALEN;
+		rx_packet_loc += ETH_ALEN;
+
+		if (priv->do_rx_crc)
+			crc = crc32_le(crc, mac4, 6);
+
+		priv->frag_seq = seq_no;
+		priv->frag_no = 1;
+		priv->frag_len = msdu_size;
+		memcpy(priv->frag_source, source, ETH_ALEN);
+		memcpy(&priv->rx_buf[ETH_ALEN], source, ETH_ALEN);
+		memcpy(priv->rx_buf, header->addr1, ETH_ALEN);
+
+		atmel_copy_to_host(priv->dev, &priv->rx_buf[12], rx_packet_loc, msdu_size);
+
+		if (priv->do_rx_crc) {
+			u32 netcrc;
+			crc = crc32_le(crc, &priv->rx_buf[12], msdu_size);
+			atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4);
+			if ((crc ^ 0xffffffff) != netcrc) {
+				priv->dev->stats.rx_crc_errors++;
+				eth_broadcast_addr(priv->frag_source);
+			}
+		}
+
+	} else if (priv->frag_no == frag_no &&
+		   priv->frag_seq == seq_no &&
+		   memcmp(priv->frag_source, source, ETH_ALEN) == 0) {
+
+		atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len],
+				   rx_packet_loc, msdu_size);
+		if (priv->do_rx_crc) {
+			u32 netcrc;
+			crc = crc32_le(crc,
+				       &priv->rx_buf[12 + priv->frag_len],
+				       msdu_size);
+			atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4);
+			if ((crc ^ 0xffffffff) != netcrc) {
+				priv->dev->stats.rx_crc_errors++;
+				eth_broadcast_addr(priv->frag_source);
+				more_frags = 1; /* don't send broken assembly */
+			}
+		}
+
+		priv->frag_len += msdu_size;
+		priv->frag_no++;
+
+		if (!more_frags) { /* last one */
+			eth_broadcast_addr(priv->frag_source);
+			if (!(skb = dev_alloc_skb(priv->frag_len + 14))) {
+				priv->dev->stats.rx_dropped++;
+			} else {
+				skb_reserve(skb, 2);
+				skb_put_data(skb, priv->rx_buf,
+				             priv->frag_len + 12);
+				skb->protocol = eth_type_trans(skb, priv->dev);
+				skb->ip_summed = CHECKSUM_NONE;
+				netif_rx(skb);
+				priv->dev->stats.rx_bytes += priv->frag_len + 12;
+				priv->dev->stats.rx_packets++;
+			}
+		}
+	} else
+		priv->wstats.discard.fragment++;
+}
+
+static void rx_done_irq(struct atmel_private *priv)
+{
+	int i;
+	struct ieee80211_hdr header;
+
+	for (i = 0;
+	     atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID &&
+		     i < priv->host_info.rx_desc_count;
+	     i++) {
+
+		u16 msdu_size, rx_packet_loc, frame_ctl, seq_control;
+		u8 status = atmel_rmem8(priv, atmel_rx(priv, RX_DESC_STATUS_OFFSET, priv->rx_desc_head));
+		u32 crc = 0xffffffff;
+
+		if (status != RX_STATUS_SUCCESS) {
+			if (status == 0xc1) /* determined by experiment */
+				priv->wstats.discard.nwid++;
+			else
+				priv->dev->stats.rx_errors++;
+			goto next;
+		}
+
+		msdu_size = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_SIZE_OFFSET, priv->rx_desc_head));
+		rx_packet_loc = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_POS_OFFSET, priv->rx_desc_head));
+
+		if (msdu_size < 30) {
+			priv->dev->stats.rx_errors++;
+			goto next;
+		}
+
+		/* Get header as far as end of seq_ctrl */
+		atmel_copy_to_host(priv->dev, (char *)&header, rx_packet_loc, 24);
+		frame_ctl = le16_to_cpu(header.frame_control);
+		seq_control = le16_to_cpu(header.seq_ctrl);
+
+		/* probe for CRC use here if needed  once five packets have
+		   arrived with the same crc status, we assume we know what's
+		   happening and stop probing */
+		if (priv->probe_crc) {
+			if (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED)) {
+				priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size);
+			} else {
+				priv->do_rx_crc = probe_crc(priv, rx_packet_loc + 24, msdu_size - 24);
+			}
+			if (priv->do_rx_crc) {
+				if (priv->crc_ok_cnt++ > 5)
+					priv->probe_crc = 0;
+			} else {
+				if (priv->crc_ko_cnt++ > 5)
+					priv->probe_crc = 0;
+			}
+		}
+
+		/* don't CRC header when WEP in use */
+		if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED))) {
+			crc = crc32_le(0xffffffff, (unsigned char *)&header, 24);
+		}
+		msdu_size -= 24; /* header */
+
+		if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) {
+			int more_fragments = frame_ctl & IEEE80211_FCTL_MOREFRAGS;
+			u8 packet_fragment_no = seq_control & IEEE80211_SCTL_FRAG;
+			u16 packet_sequence_no = (seq_control & IEEE80211_SCTL_SEQ) >> 4;
+
+			if (!more_fragments && packet_fragment_no == 0) {
+				fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc);
+			} else {
+				frag_rx_path(priv, &header, msdu_size, rx_packet_loc, crc,
+					     packet_sequence_no, packet_fragment_no, more_fragments);
+			}
+		}
+
+		if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
+			/* copy rest of packet into buffer */
+			atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size);
+
+			/* we use the same buffer for frag reassembly and control packets */
+			eth_broadcast_addr(priv->frag_source);
+
+			if (priv->do_rx_crc) {
+				/* last 4 octets is crc */
+				msdu_size -= 4;
+				crc = crc32_le(crc, (unsigned char *)&priv->rx_buf, msdu_size);
+				if ((crc ^ 0xffffffff) != (*((u32 *)&priv->rx_buf[msdu_size]))) {
+					priv->dev->stats.rx_crc_errors++;
+					goto next;
+				}
+			}
+
+			atmel_management_frame(priv, &header, msdu_size,
+					       atmel_rmem8(priv, atmel_rx(priv, RX_DESC_RSSI_OFFSET, priv->rx_desc_head)));
+		}
+
+next:
+		/* release descriptor */
+		atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED);
+
+		if (priv->rx_desc_head < (priv->host_info.rx_desc_count - 1))
+			priv->rx_desc_head++;
+		else
+			priv->rx_desc_head = 0;
+	}
+}
+
+static irqreturn_t service_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct atmel_private *priv = netdev_priv(dev);
+	u8 isr;
+	int i = -1;
+	static const u8 irq_order[] = {
+		ISR_OUT_OF_RANGE,
+		ISR_RxCOMPLETE,
+		ISR_TxCOMPLETE,
+		ISR_RxFRAMELOST,
+		ISR_FATAL_ERROR,
+		ISR_COMMAND_COMPLETE,
+		ISR_IBSS_MERGE,
+		ISR_GENERIC_IRQ
+	};
+
+	if (priv->card && priv->present_callback &&
+	    !(*priv->present_callback)(priv->card))
+		return IRQ_HANDLED;
+
+	/* In this state upper-level code assumes it can mess with
+	   the card unhampered by interrupts which may change register state.
+	   Note that even though the card shouldn't generate interrupts
+	   the inturrupt line may be shared. This allows card setup
+	   to go on without disabling interrupts for a long time. */
+	if (priv->station_state == STATION_STATE_DOWN)
+		return IRQ_NONE;
+
+	atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */
+
+	while (1) {
+		if (!atmel_lock_mac(priv)) {
+			/* failed to contact card */
+			printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
+			return IRQ_HANDLED;
+		}
+
+		isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
+		atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+
+		if (!isr) {
+			atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
+			return i == -1 ? IRQ_NONE : IRQ_HANDLED;
+		}
+
+		atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */
+
+		for (i = 0; i < ARRAY_SIZE(irq_order); i++)
+			if (isr & irq_order[i])
+				break;
+
+		if (!atmel_lock_mac(priv)) {
+			/* failed to contact card */
+			printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
+			return IRQ_HANDLED;
+		}
+
+		isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
+		isr ^= irq_order[i];
+		atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr);
+		atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+
+		switch (irq_order[i]) {
+
+		case ISR_OUT_OF_RANGE:
+			if (priv->operating_mode == IW_MODE_INFRA &&
+			    priv->station_state == STATION_STATE_READY) {
+				priv->station_is_associated = 0;
+				atmel_scan(priv, 1);
+			}
+			break;
+
+		case ISR_RxFRAMELOST:
+			priv->wstats.discard.misc++;
+			fallthrough;
+		case ISR_RxCOMPLETE:
+			rx_done_irq(priv);
+			break;
+
+		case ISR_TxCOMPLETE:
+			tx_done_irq(priv);
+			break;
+
+		case ISR_FATAL_ERROR:
+			printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name);
+			atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+			break;
+
+		case ISR_COMMAND_COMPLETE:
+			atmel_command_irq(priv);
+			break;
+
+		case ISR_IBSS_MERGE:
+			atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
+				      priv->CurrentBSSID, 6);
+			/* The WPA stuff cares about the current AP address */
+			if (priv->use_wpa)
+				build_wpa_mib(priv);
+			break;
+		case ISR_GENERIC_IRQ:
+			printk(KERN_INFO "%s: Generic_irq received.\n", dev->name);
+			break;
+		}
+	}
+}
+
+static struct iw_statistics *atmel_get_wireless_stats(struct net_device *dev)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+
+	/* update the link quality here in case we are seeing no beacons
+	   at all to drive the process */
+	atmel_smooth_qual(priv);
+
+	priv->wstats.status = priv->station_state;
+
+	if (priv->operating_mode == IW_MODE_INFRA) {
+		if (priv->station_state != STATION_STATE_READY) {
+			priv->wstats.qual.qual = 0;
+			priv->wstats.qual.level = 0;
+			priv->wstats.qual.updated = (IW_QUAL_QUAL_INVALID
+					| IW_QUAL_LEVEL_INVALID);
+		}
+		priv->wstats.qual.noise = 0;
+		priv->wstats.qual.updated |= IW_QUAL_NOISE_INVALID;
+	} else {
+		/* Quality levels cannot be determined in ad-hoc mode,
+		   because we can 'hear' more that one remote station. */
+		priv->wstats.qual.qual = 0;
+		priv->wstats.qual.level	= 0;
+		priv->wstats.qual.noise	= 0;
+		priv->wstats.qual.updated = IW_QUAL_QUAL_INVALID
+					| IW_QUAL_LEVEL_INVALID
+					| IW_QUAL_NOISE_INVALID;
+		priv->wstats.miss.beacon = 0;
+	}
+
+	return &priv->wstats;
+}
+
+static int atmel_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	eth_hw_addr_set(dev, addr->sa_data);
+	return atmel_open(dev);
+}
+
+EXPORT_SYMBOL(atmel_open);
+
+int atmel_open(struct net_device *dev)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+	int i, channel, err;
+
+	/* any scheduled timer is no longer needed and might screw things up.. */
+	del_timer_sync(&priv->management_timer);
+
+	/* Interrupts will not touch the card once in this state... */
+	priv->station_state = STATION_STATE_DOWN;
+
+	if (priv->new_SSID_size) {
+		memcpy(priv->SSID, priv->new_SSID, priv->new_SSID_size);
+		priv->SSID_size = priv->new_SSID_size;
+		priv->new_SSID_size = 0;
+	}
+	priv->BSS_list_entries = 0;
+
+	priv->AuthenticationRequestRetryCnt = 0;
+	priv->AssociationRequestRetryCnt = 0;
+	priv->ReAssociationRequestRetryCnt = 0;
+	priv->CurrentAuthentTransactionSeqNum = 0x0001;
+	priv->ExpectedAuthentTransactionSeqNum = 0x0002;
+
+	priv->site_survey_state = SITE_SURVEY_IDLE;
+	priv->station_is_associated = 0;
+
+	err = reset_atmel_card(dev);
+	if (err)
+		return err;
+
+	if (priv->config_reg_domain) {
+		priv->reg_domain = priv->config_reg_domain;
+		atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS, priv->reg_domain);
+	} else {
+		priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS);
+		for (i = 0; i < ARRAY_SIZE(channel_table); i++)
+			if (priv->reg_domain == channel_table[i].reg_domain)
+				break;
+		if (i == ARRAY_SIZE(channel_table)) {
+			priv->reg_domain = REG_DOMAIN_MKK1;
+			printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name);
+		}
+	}
+
+	if ((channel = atmel_validate_channel(priv, priv->channel)))
+		priv->channel = channel;
+
+	/* this moves station_state on.... */
+	atmel_scan(priv, 1);
+
+	atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */
+	return 0;
+}
+
+static int atmel_close(struct net_device *dev)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+
+	/* Send event to userspace that we are disassociating */
+	if (priv->station_state == STATION_STATE_READY) {
+		union iwreq_data wrqu;
+
+		wrqu.data.length = 0;
+		wrqu.data.flags = 0;
+		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+		eth_zero_addr(wrqu.ap_addr.sa_data);
+		wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+	}
+
+	atmel_enter_state(priv, STATION_STATE_DOWN);
+
+	if (priv->bus_type == BUS_TYPE_PCCARD)
+		atmel_write16(dev, GCR, 0x0060);
+	atmel_write16(dev, GCR, 0x0040);
+	return 0;
+}
+
+static int atmel_validate_channel(struct atmel_private *priv, int channel)
+{
+	/* check that channel is OK, if so return zero,
+	   else return suitable default channel */
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(channel_table); i++)
+		if (priv->reg_domain == channel_table[i].reg_domain) {
+			if (channel >= channel_table[i].min &&
+			    channel <= channel_table[i].max)
+				return 0;
+			else
+				return channel_table[i].min;
+		}
+	return 0;
+}
+
+#ifdef CONFIG_PROC_FS
+static int atmel_proc_show(struct seq_file *m, void *v)
+{
+	struct atmel_private *priv = m->private;
+	int i;
+	char *s, *r, *c;
+
+	seq_printf(m, "Driver version:\t\t%d.%d\n", DRIVER_MAJOR, DRIVER_MINOR);
+
+	if (priv->station_state != STATION_STATE_DOWN) {
+		seq_printf(m,
+			   "Firmware version:\t%d.%d build %d\n"
+			   "Firmware location:\t",
+			   priv->host_info.major_version,
+			   priv->host_info.minor_version,
+			   priv->host_info.build_version);
+
+		if (priv->card_type != CARD_TYPE_EEPROM)
+			seq_puts(m, "on card\n");
+		else if (priv->firmware)
+			seq_printf(m, "%s loaded by host\n", priv->firmware_id);
+		else
+			seq_printf(m, "%s loaded by hotplug\n", priv->firmware_id);
+
+		switch (priv->card_type) {
+		case CARD_TYPE_PARALLEL_FLASH:
+			c = "Parallel flash";
+			break;
+		case CARD_TYPE_SPI_FLASH:
+			c = "SPI flash\n";
+			break;
+		case CARD_TYPE_EEPROM:
+			c = "EEPROM";
+			break;
+		default:
+			c = "<unknown>";
+		}
+
+		r = "<unknown>";
+		for (i = 0; i < ARRAY_SIZE(channel_table); i++)
+			if (priv->reg_domain == channel_table[i].reg_domain)
+				r = channel_table[i].name;
+
+		seq_printf(m, "MAC memory type:\t%s\n", c);
+		seq_printf(m, "Regulatory domain:\t%s\n", r);
+		seq_printf(m, "Host CRC checking:\t%s\n",
+			 priv->do_rx_crc ? "On" : "Off");
+		seq_printf(m, "WPA-capable firmware:\t%s\n",
+			 priv->use_wpa ? "Yes" : "No");
+	}
+
+	switch (priv->station_state) {
+	case STATION_STATE_SCANNING:
+		s = "Scanning";
+		break;
+	case STATION_STATE_JOINNING:
+		s = "Joining";
+		break;
+	case STATION_STATE_AUTHENTICATING:
+		s = "Authenticating";
+		break;
+	case STATION_STATE_ASSOCIATING:
+		s = "Associating";
+		break;
+	case STATION_STATE_READY:
+		s = "Ready";
+		break;
+	case STATION_STATE_REASSOCIATING:
+		s = "Reassociating";
+		break;
+	case STATION_STATE_MGMT_ERROR:
+		s = "Management error";
+		break;
+	case STATION_STATE_DOWN:
+		s = "Down";
+		break;
+	default:
+		s = "<unknown>";
+	}
+
+	seq_printf(m, "Current state:\t\t%s\n", s);
+	return 0;
+}
+#endif
+
+static const struct net_device_ops atmel_netdev_ops = {
+	.ndo_open 		= atmel_open,
+	.ndo_stop		= atmel_close,
+	.ndo_set_mac_address 	= atmel_set_mac_address,
+	.ndo_start_xmit 	= start_tx,
+	.ndo_do_ioctl 		= atmel_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+struct net_device *init_atmel_card(unsigned short irq, unsigned long port,
+				   const AtmelFWType fw_type,
+				   struct device *sys_dev,
+				   int (*card_present)(void *), void *card)
+{
+	struct net_device *dev;
+	struct atmel_private *priv;
+	int rc;
+
+	/* Create the network device object. */
+	dev = alloc_etherdev(sizeof(*priv));
+	if (!dev)
+		return NULL;
+
+	if (dev_alloc_name(dev, dev->name) < 0) {
+		printk(KERN_ERR "atmel: Couldn't get name!\n");
+		goto err_out_free;
+	}
+
+	priv = netdev_priv(dev);
+	priv->dev = dev;
+	priv->sys_dev = sys_dev;
+	priv->present_callback = card_present;
+	priv->card = card;
+	priv->firmware = NULL;
+	priv->firmware_type = fw_type;
+	if (firmware) /* module parameter */
+		strscpy(priv->firmware_id, firmware, sizeof(priv->firmware_id));
+	priv->bus_type = card_present ? BUS_TYPE_PCCARD : BUS_TYPE_PCI;
+	priv->station_state = STATION_STATE_DOWN;
+	priv->do_rx_crc = 0;
+	/* For PCMCIA cards, some chips need CRC, some don't
+	   so we have to probe. */
+	if (priv->bus_type == BUS_TYPE_PCCARD) {
+		priv->probe_crc = 1;
+		priv->crc_ok_cnt = priv->crc_ko_cnt = 0;
+	} else
+		priv->probe_crc = 0;
+	priv->last_qual = jiffies;
+	priv->last_beacon_timestamp = 0;
+	memset(priv->frag_source, 0xff, sizeof(priv->frag_source));
+	eth_zero_addr(priv->BSSID);
+	priv->CurrentBSSID[0] = 0xFF; /* Initialize to something invalid.... */
+	priv->station_was_associated = 0;
+
+	priv->last_survey = jiffies;
+	priv->preamble = LONG_PREAMBLE;
+	priv->operating_mode = IW_MODE_INFRA;
+	priv->connect_to_any_BSS = 0;
+	priv->config_reg_domain = 0;
+	priv->reg_domain = 0;
+	priv->tx_rate = 3;
+	priv->auto_tx_rate = 1;
+	priv->channel = 4;
+	priv->power_mode = 0;
+	priv->SSID[0] = '\0';
+	priv->SSID_size = 0;
+	priv->new_SSID_size = 0;
+	priv->frag_threshold = 2346;
+	priv->rts_threshold = 2347;
+	priv->short_retry = 7;
+	priv->long_retry = 4;
+
+	priv->wep_is_on = 0;
+	priv->default_key = 0;
+	priv->encryption_level = 0;
+	priv->exclude_unencrypted = 0;
+	priv->group_cipher_suite = priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+	priv->use_wpa = 0;
+	memset(priv->wep_keys, 0, sizeof(priv->wep_keys));
+	memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len));
+
+	priv->default_beacon_period = priv->beacon_period = 100;
+	priv->listen_interval = 1;
+
+	timer_setup(&priv->management_timer, atmel_management_timer, 0);
+	spin_lock_init(&priv->irqlock);
+	spin_lock_init(&priv->timerlock);
+
+	dev->netdev_ops = &atmel_netdev_ops;
+	dev->wireless_handlers = &atmel_handler_def;
+	dev->irq = irq;
+	dev->base_addr = port;
+
+	/* MTU range: 68 - 2312 */
+	dev->min_mtu = 68;
+	dev->max_mtu = MAX_WIRELESS_BODY - ETH_FCS_LEN;
+
+	SET_NETDEV_DEV(dev, sys_dev);
+
+	if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
+		printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc);
+		goto err_out_free;
+	}
+
+	if (!request_region(dev->base_addr, 32,
+			    priv->bus_type == BUS_TYPE_PCCARD ?  "atmel_cs" : "atmel_pci")) {
+		goto err_out_irq;
+	}
+
+	if (register_netdev(dev))
+		goto err_out_res;
+
+	if (!probe_atmel_card(dev)) {
+		unregister_netdev(dev);
+		goto err_out_res;
+	}
+
+	netif_carrier_off(dev);
+
+	if (!proc_create_single_data("driver/atmel", 0, NULL, atmel_proc_show,
+			priv))
+		printk(KERN_WARNING "atmel: unable to create /proc entry.\n");
+
+	printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %pM\n",
+	       dev->name, DRIVER_MAJOR, DRIVER_MINOR, dev->dev_addr);
+
+	return dev;
+
+err_out_res:
+	release_region(dev->base_addr, 32);
+err_out_irq:
+	free_irq(dev->irq, dev);
+err_out_free:
+	free_netdev(dev);
+	return NULL;
+}
+
+EXPORT_SYMBOL(init_atmel_card);
+
+void stop_atmel_card(struct net_device *dev)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+
+	/* put a brick on it... */
+	if (priv->bus_type == BUS_TYPE_PCCARD)
+		atmel_write16(dev, GCR, 0x0060);
+	atmel_write16(dev, GCR, 0x0040);
+
+	del_timer_sync(&priv->management_timer);
+	unregister_netdev(dev);
+	remove_proc_entry("driver/atmel", NULL);
+	free_irq(dev->irq, dev);
+	kfree(priv->firmware);
+	release_region(dev->base_addr, 32);
+	free_netdev(dev);
+}
+
+EXPORT_SYMBOL(stop_atmel_card);
+
+static int atmel_set_essid(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	struct iw_point *dwrq = &wrqu->essid;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	/* Check if we asked for `any' */
+	if (dwrq->flags == 0) {
+		priv->connect_to_any_BSS = 1;
+	} else {
+		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+		priv->connect_to_any_BSS = 0;
+
+		/* Check the size of the string */
+		if (dwrq->length > MAX_SSID_LENGTH)
+			 return -E2BIG;
+		if (index != 0)
+			return -EINVAL;
+
+		memcpy(priv->new_SSID, extra, dwrq->length);
+		priv->new_SSID_size = dwrq->length;
+	}
+
+	return -EINPROGRESS;
+}
+
+static int atmel_get_essid(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	struct iw_point *dwrq = &wrqu->essid;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	/* Get the current SSID */
+	if (priv->new_SSID_size != 0) {
+		memcpy(extra, priv->new_SSID, priv->new_SSID_size);
+		dwrq->length = priv->new_SSID_size;
+	} else {
+		memcpy(extra, priv->SSID, priv->SSID_size);
+		dwrq->length = priv->SSID_size;
+	}
+
+	dwrq->flags = !priv->connect_to_any_BSS; /* active */
+
+	return 0;
+}
+
+static int atmel_get_wap(struct net_device *dev,
+			 struct iw_request_info *info,
+			 union iwreq_data *wrqu,
+			 char *extra)
+{
+	struct sockaddr *awrq = &wrqu->ap_addr;
+	struct atmel_private *priv = netdev_priv(dev);
+	memcpy(awrq->sa_data, priv->CurrentBSSID, ETH_ALEN);
+	awrq->sa_family = ARPHRD_ETHER;
+
+	return 0;
+}
+
+static int atmel_set_encode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	struct iw_point *dwrq = &wrqu->encoding;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	/* Basic checking: do we have a key to set ?
+	 * Note : with the new API, it's impossible to get a NULL pointer.
+	 * Therefore, we need to check a key size == 0 instead.
+	 * New version of iwconfig properly set the IW_ENCODE_NOKEY flag
+	 * when no key is present (only change flags), but older versions
+	 * don't do it. - Jean II */
+	if (dwrq->length > 0) {
+		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+		int current_index = priv->default_key;
+		/* Check the size of the key */
+		if (dwrq->length > 13) {
+			return -EINVAL;
+		}
+		/* Check the index (none -> use current) */
+		if (index < 0 || index >= 4)
+			index = current_index;
+		else
+			priv->default_key = index;
+		/* Set the length */
+		if (dwrq->length > 5)
+			priv->wep_key_len[index] = 13;
+		else
+			if (dwrq->length > 0)
+				priv->wep_key_len[index] = 5;
+			else
+				/* Disable the key */
+				priv->wep_key_len[index] = 0;
+		/* Check if the key is not marked as invalid */
+		if (!(dwrq->flags & IW_ENCODE_NOKEY)) {
+			/* Cleanup */
+			memset(priv->wep_keys[index], 0, 13);
+			/* Copy the key in the driver */
+			memcpy(priv->wep_keys[index], extra, dwrq->length);
+		}
+		/* WE specify that if a valid key is set, encryption
+		 * should be enabled (user may turn it off later)
+		 * This is also how "iwconfig ethX key on" works */
+		if (index == current_index &&
+		    priv->wep_key_len[index] > 0) {
+			priv->wep_is_on = 1;
+			priv->exclude_unencrypted = 1;
+			if (priv->wep_key_len[index] > 5) {
+				priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+				priv->encryption_level = 2;
+			} else {
+				priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+				priv->encryption_level = 1;
+			}
+		}
+	} else {
+		/* Do we want to just set the transmit key index ? */
+		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+		if (index >= 0 && index < 4) {
+			priv->default_key = index;
+		} else
+			/* Don't complain if only change the mode */
+			if (!(dwrq->flags & IW_ENCODE_MODE))
+				return -EINVAL;
+	}
+	/* Read the flags */
+	if (dwrq->flags & IW_ENCODE_DISABLED) {
+		priv->wep_is_on = 0;
+		priv->encryption_level = 0;
+		priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+	} else {
+		priv->wep_is_on = 1;
+		if (priv->wep_key_len[priv->default_key] > 5) {
+			priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+			priv->encryption_level = 2;
+		} else {
+			priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+			priv->encryption_level = 1;
+		}
+	}
+	if (dwrq->flags & IW_ENCODE_RESTRICTED)
+		priv->exclude_unencrypted = 1;
+	if (dwrq->flags & IW_ENCODE_OPEN)
+		priv->exclude_unencrypted = 0;
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int atmel_get_encode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	struct iw_point *dwrq = &wrqu->encoding;
+	struct atmel_private *priv = netdev_priv(dev);
+	int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+	if (!priv->wep_is_on)
+		dwrq->flags = IW_ENCODE_DISABLED;
+	else {
+		if (priv->exclude_unencrypted)
+			dwrq->flags = IW_ENCODE_RESTRICTED;
+		else
+			dwrq->flags = IW_ENCODE_OPEN;
+	}
+		/* Which key do we want ? -1 -> tx index */
+	if (index < 0 || index >= 4)
+		index = priv->default_key;
+	dwrq->flags |= index + 1;
+	/* Copy the key to the user buffer */
+	dwrq->length = priv->wep_key_len[index];
+	if (dwrq->length > 16) {
+		dwrq->length = 0;
+	} else {
+		memset(extra, 0, 16);
+		memcpy(extra, priv->wep_keys[index], dwrq->length);
+	}
+
+	return 0;
+}
+
+static int atmel_set_encodeext(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	int idx, key_len, alg = ext->alg, set_key = 1;
+
+	/* Determine and validate the key index */
+	idx = encoding->flags & IW_ENCODE_INDEX;
+	if (idx) {
+		if (idx < 1 || idx > 4)
+			return -EINVAL;
+		idx--;
+	} else
+		idx = priv->default_key;
+
+	if (encoding->flags & IW_ENCODE_DISABLED)
+	    alg = IW_ENCODE_ALG_NONE;
+
+	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+		priv->default_key = idx;
+		set_key = ext->key_len > 0 ? 1 : 0;
+	}
+
+	if (set_key) {
+		/* Set the requested key first */
+		switch (alg) {
+		case IW_ENCODE_ALG_NONE:
+			priv->wep_is_on = 0;
+			priv->encryption_level = 0;
+			priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+			break;
+		case IW_ENCODE_ALG_WEP:
+			if (ext->key_len > 5) {
+				priv->wep_key_len[idx] = 13;
+				priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+				priv->encryption_level = 2;
+			} else if (ext->key_len > 0) {
+				priv->wep_key_len[idx] = 5;
+				priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+				priv->encryption_level = 1;
+			} else {
+				return -EINVAL;
+			}
+			priv->wep_is_on = 1;
+			memset(priv->wep_keys[idx], 0, 13);
+			key_len = min ((int)ext->key_len, priv->wep_key_len[idx]);
+			memcpy(priv->wep_keys[idx], ext->key, key_len);
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINPROGRESS;
+}
+
+static int atmel_get_encodeext(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	int idx, max_key_len;
+
+	max_key_len = encoding->length - sizeof(*ext);
+	if (max_key_len < 0)
+		return -EINVAL;
+
+	idx = encoding->flags & IW_ENCODE_INDEX;
+	if (idx) {
+		if (idx < 1 || idx > 4)
+			return -EINVAL;
+		idx--;
+	} else
+		idx = priv->default_key;
+
+	encoding->flags = idx + 1;
+	memset(ext, 0, sizeof(*ext));
+
+	if (!priv->wep_is_on) {
+		ext->alg = IW_ENCODE_ALG_NONE;
+		ext->key_len = 0;
+		encoding->flags |= IW_ENCODE_DISABLED;
+	} else {
+		if (priv->encryption_level > 0)
+			ext->alg = IW_ENCODE_ALG_WEP;
+		else
+			return -EINVAL;
+
+		ext->key_len = priv->wep_key_len[idx];
+		memcpy(ext->key, priv->wep_keys[idx], ext->key_len);
+		encoding->flags |= IW_ENCODE_ENABLED;
+	}
+
+	return 0;
+}
+
+static int atmel_set_auth(struct net_device *dev,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+	struct iw_param *param = &wrqu->param;
+
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+	case IW_AUTH_CIPHER_PAIRWISE:
+	case IW_AUTH_CIPHER_GROUP:
+	case IW_AUTH_KEY_MGMT:
+	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+	case IW_AUTH_PRIVACY_INVOKED:
+		/*
+		 * atmel does not use these parameters
+		 */
+		break;
+
+	case IW_AUTH_DROP_UNENCRYPTED:
+		priv->exclude_unencrypted = param->value ? 1 : 0;
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG: {
+			if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+				priv->exclude_unencrypted = 1;
+			} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+				priv->exclude_unencrypted = 0;
+			} else
+				return -EINVAL;
+			break;
+		}
+
+	case IW_AUTH_WPA_ENABLED:
+		/* Silently accept disable of WPA */
+		if (param->value > 0)
+			return -EOPNOTSUPP;
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+	return -EINPROGRESS;
+}
+
+static int atmel_get_auth(struct net_device *dev,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+	struct iw_param *param = &wrqu->param;
+
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_DROP_UNENCRYPTED:
+		param->value = priv->exclude_unencrypted;
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG:
+		if (priv->exclude_unencrypted == 1)
+			param->value = IW_AUTH_ALG_SHARED_KEY;
+		else
+			param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+		break;
+
+	case IW_AUTH_WPA_ENABLED:
+		param->value = 0;
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+
+static int atmel_get_name(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	strcpy(wrqu->name, "IEEE 802.11-DS");
+	return 0;
+}
+
+static int atmel_set_rate(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	struct iw_param *vwrq = &wrqu->bitrate;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	if (vwrq->fixed == 0) {
+		priv->tx_rate = 3;
+		priv->auto_tx_rate = 1;
+	} else {
+		priv->auto_tx_rate = 0;
+
+		/* Which type of value ? */
+		if ((vwrq->value < 4) && (vwrq->value >= 0)) {
+			/* Setting by rate index */
+			priv->tx_rate = vwrq->value;
+		} else {
+		/* Setting by frequency value */
+			switch (vwrq->value) {
+			case  1000000:
+				priv->tx_rate = 0;
+				break;
+			case  2000000:
+				priv->tx_rate = 1;
+				break;
+			case  5500000:
+				priv->tx_rate = 2;
+				break;
+			case 11000000:
+				priv->tx_rate = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+	}
+
+	return -EINPROGRESS;
+}
+
+static int atmel_set_mode(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	__u32 *uwrq = &wrqu->mode;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	if (*uwrq != IW_MODE_ADHOC && *uwrq != IW_MODE_INFRA)
+		return -EINVAL;
+
+	priv->operating_mode = *uwrq;
+	return -EINPROGRESS;
+}
+
+static int atmel_get_mode(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	__u32 *uwrq = &wrqu->mode;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	*uwrq = priv->operating_mode;
+	return 0;
+}
+
+static int atmel_get_rate(struct net_device *dev,
+			 struct iw_request_info *info,
+			 union iwreq_data *wrqu,
+			 char *extra)
+{
+	struct iw_param *vwrq = &wrqu->bitrate;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	if (priv->auto_tx_rate) {
+		vwrq->fixed = 0;
+		vwrq->value = 11000000;
+	} else {
+		vwrq->fixed = 1;
+		switch (priv->tx_rate) {
+		case 0:
+			vwrq->value =  1000000;
+			break;
+		case 1:
+			vwrq->value =  2000000;
+			break;
+		case 2:
+			vwrq->value =  5500000;
+			break;
+		case 3:
+			vwrq->value = 11000000;
+			break;
+		}
+	}
+	return 0;
+}
+
+static int atmel_set_power(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	struct iw_param *vwrq = &wrqu->power;
+	struct atmel_private *priv = netdev_priv(dev);
+	priv->power_mode = vwrq->disabled ? 0 : 1;
+	return -EINPROGRESS;
+}
+
+static int atmel_get_power(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	struct iw_param *vwrq = &wrqu->power;
+	struct atmel_private *priv = netdev_priv(dev);
+	vwrq->disabled = priv->power_mode ? 0 : 1;
+	vwrq->flags = IW_POWER_ON;
+	return 0;
+}
+
+static int atmel_set_retry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	struct iw_param *vwrq = &wrqu->retry;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	if (!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) {
+		if (vwrq->flags & IW_RETRY_LONG)
+			priv->long_retry = vwrq->value;
+		else if (vwrq->flags & IW_RETRY_SHORT)
+			priv->short_retry = vwrq->value;
+		else {
+			/* No modifier : set both */
+			priv->long_retry = vwrq->value;
+			priv->short_retry = vwrq->value;
+		}
+		return -EINPROGRESS;
+	}
+
+	return -EINVAL;
+}
+
+static int atmel_get_retry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	struct iw_param *vwrq = &wrqu->retry;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	vwrq->disabled = 0;      /* Can't be disabled */
+
+	/* Note : by default, display the short retry number */
+	if (vwrq->flags & IW_RETRY_LONG) {
+		vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
+		vwrq->value = priv->long_retry;
+	} else {
+		vwrq->flags = IW_RETRY_LIMIT;
+		vwrq->value = priv->short_retry;
+		if (priv->long_retry != priv->short_retry)
+			vwrq->flags |= IW_RETRY_SHORT;
+	}
+
+	return 0;
+}
+
+static int atmel_set_rts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 union iwreq_data *wrqu,
+			 char *extra)
+{
+	struct iw_param *vwrq = &wrqu->rts;
+	struct atmel_private *priv = netdev_priv(dev);
+	int rthr = vwrq->value;
+
+	if (vwrq->disabled)
+		rthr = 2347;
+	if ((rthr < 0) || (rthr > 2347)) {
+		return -EINVAL;
+	}
+	priv->rts_threshold = rthr;
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int atmel_get_rts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 union iwreq_data *wrqu,
+			 char *extra)
+{
+	struct iw_param *vwrq = &wrqu->rts;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	vwrq->value = priv->rts_threshold;
+	vwrq->disabled = (vwrq->value >= 2347);
+	vwrq->fixed = 1;
+
+	return 0;
+}
+
+static int atmel_set_frag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	struct iw_param *vwrq = &wrqu->frag;
+	struct atmel_private *priv = netdev_priv(dev);
+	int fthr = vwrq->value;
+
+	if (vwrq->disabled)
+		fthr = 2346;
+	if ((fthr < 256) || (fthr > 2346)) {
+		return -EINVAL;
+	}
+	fthr &= ~0x1;	/* Get an even value - is it really needed ??? */
+	priv->frag_threshold = fthr;
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int atmel_get_frag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	struct iw_param *vwrq = &wrqu->frag;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	vwrq->value = priv->frag_threshold;
+	vwrq->disabled = (vwrq->value >= 2346);
+	vwrq->fixed = 1;
+
+	return 0;
+}
+
+static int atmel_set_freq(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	struct iw_freq *fwrq = &wrqu->freq;
+	struct atmel_private *priv = netdev_priv(dev);
+	int rc = -EINPROGRESS;		/* Call commit handler */
+
+	/* If setting by frequency, convert to a channel */
+	if (fwrq->e == 1) {
+		int f = fwrq->m / 100000;
+
+		/* Hack to fall through... */
+		fwrq->e = 0;
+		fwrq->m = ieee80211_frequency_to_channel(f);
+	}
+	/* Setting by channel number */
+	if (fwrq->m < 0 || fwrq->m > 1000 || fwrq->e > 0)
+		rc = -EOPNOTSUPP;
+	else {
+		int channel = fwrq->m;
+		if (atmel_validate_channel(priv, channel) == 0) {
+			priv->channel = channel;
+		} else {
+			rc = -EINVAL;
+		}
+	}
+	return rc;
+}
+
+static int atmel_get_freq(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	struct iw_freq *fwrq = &wrqu->freq;
+	struct atmel_private *priv = netdev_priv(dev);
+
+	fwrq->m = priv->channel;
+	fwrq->e = 0;
+	return 0;
+}
+
+static int atmel_set_scan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *dwrq,
+			  char *extra)
+{
+	struct atmel_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* Note : you may have realised that, as this is a SET operation,
+	 * this is privileged and therefore a normal user can't
+	 * perform scanning.
+	 * This is not an error, while the device perform scanning,
+	 * traffic doesn't flow, so it's a perfect DoS...
+	 * Jean II */
+
+	if (priv->station_state == STATION_STATE_DOWN)
+		return -EAGAIN;
+
+	/* Timeout old surveys. */
+	if (time_after(jiffies, priv->last_survey + 20 * HZ))
+		priv->site_survey_state = SITE_SURVEY_IDLE;
+	priv->last_survey = jiffies;
+
+	/* Initiate a scan command */
+	if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS)
+		return -EBUSY;
+
+	del_timer_sync(&priv->management_timer);
+	spin_lock_irqsave(&priv->irqlock, flags);
+
+	priv->site_survey_state = SITE_SURVEY_IN_PROGRESS;
+	priv->fast_scan = 0;
+	atmel_scan(priv, 0);
+	spin_unlock_irqrestore(&priv->irqlock, flags);
+
+	return 0;
+}
+
+static int atmel_get_scan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu,
+			  char *extra)
+{
+	struct iw_point *dwrq = &wrqu->data;
+	struct atmel_private *priv = netdev_priv(dev);
+	int i;
+	char *current_ev = extra;
+	struct iw_event	iwe;
+
+	if (priv->site_survey_state != SITE_SURVEY_COMPLETED)
+		return -EAGAIN;
+
+	for (i = 0; i < priv->BSS_list_entries; i++) {
+		iwe.cmd = SIOCGIWAP;
+		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+		memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, ETH_ALEN);
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_ADDR_LEN);
+
+		iwe.u.data.length =  priv->BSSinfo[i].SSIDsize;
+		if (iwe.u.data.length > 32)
+			iwe.u.data.length = 32;
+		iwe.cmd = SIOCGIWESSID;
+		iwe.u.data.flags = 1;
+		current_ev = iwe_stream_add_point(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, priv->BSSinfo[i].SSID);
+
+		iwe.cmd = SIOCGIWMODE;
+		iwe.u.mode = priv->BSSinfo[i].BSStype;
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_UINT_LEN);
+
+		iwe.cmd = SIOCGIWFREQ;
+		iwe.u.freq.m = priv->BSSinfo[i].channel;
+		iwe.u.freq.e = 0;
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_FREQ_LEN);
+
+		/* Add quality statistics */
+		iwe.cmd = IWEVQUAL;
+		iwe.u.qual.level = priv->BSSinfo[i].RSSI;
+		iwe.u.qual.qual  = iwe.u.qual.level;
+		/* iwe.u.qual.noise  = SOMETHING */
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_QUAL_LEN);
+
+
+		iwe.cmd = SIOCGIWENCODE;
+		if (priv->BSSinfo[i].UsingWEP)
+			iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+		else
+			iwe.u.data.flags = IW_ENCODE_DISABLED;
+		iwe.u.data.length = 0;
+		current_ev = iwe_stream_add_point(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, NULL);
+	}
+
+	/* Length of data */
+	dwrq->length = (current_ev - extra);
+	dwrq->flags = 0;
+
+	return 0;
+}
+
+static int atmel_get_range(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	struct iw_point *dwrq = &wrqu->data;
+	struct atmel_private *priv = netdev_priv(dev);
+	struct iw_range *range = (struct iw_range *) extra;
+	int k, i, j;
+
+	dwrq->length = sizeof(struct iw_range);
+	memset(range, 0, sizeof(struct iw_range));
+	range->min_nwid = 0x0000;
+	range->max_nwid = 0x0000;
+	range->num_channels = 0;
+	for (j = 0; j < ARRAY_SIZE(channel_table); j++)
+		if (priv->reg_domain == channel_table[j].reg_domain) {
+			range->num_channels = channel_table[j].max - channel_table[j].min + 1;
+			break;
+		}
+	if (range->num_channels != 0) {
+		for (k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) {
+			range->freq[k].i = i; /* List index */
+
+			/* Values in MHz -> * 10^5 * 10 */
+			range->freq[k].m = 100000 *
+			 ieee80211_channel_to_frequency(i, NL80211_BAND_2GHZ);
+			range->freq[k++].e = 1;
+		}
+		range->num_frequency = k;
+	}
+
+	range->max_qual.qual = 100;
+	range->max_qual.level = 100;
+	range->max_qual.noise = 0;
+	range->max_qual.updated = IW_QUAL_NOISE_INVALID;
+
+	range->avg_qual.qual = 50;
+	range->avg_qual.level = 50;
+	range->avg_qual.noise = 0;
+	range->avg_qual.updated = IW_QUAL_NOISE_INVALID;
+
+	range->sensitivity = 0;
+
+	range->bitrate[0] =  1000000;
+	range->bitrate[1] =  2000000;
+	range->bitrate[2] =  5500000;
+	range->bitrate[3] = 11000000;
+	range->num_bitrates = 4;
+
+	range->min_rts = 0;
+	range->max_rts = 2347;
+	range->min_frag = 256;
+	range->max_frag = 2346;
+
+	range->encoding_size[0] = 5;
+	range->encoding_size[1] = 13;
+	range->num_encoding_sizes = 2;
+	range->max_encoding_tokens = 4;
+
+	range->pmp_flags = IW_POWER_ON;
+	range->pmt_flags = IW_POWER_ON;
+	range->pm_capa = 0;
+
+	range->we_version_source = WIRELESS_EXT;
+	range->we_version_compiled = WIRELESS_EXT;
+	range->retry_capa = IW_RETRY_LIMIT ;
+	range->retry_flags = IW_RETRY_LIMIT;
+	range->r_time_flags = 0;
+	range->min_retry = 1;
+	range->max_retry = 65535;
+
+	return 0;
+}
+
+static int atmel_set_wap(struct net_device *dev,
+			 struct iw_request_info *info,
+			 union iwreq_data *wrqu,
+			 char *extra)
+{
+	struct sockaddr *awrq = &wrqu->ap_addr;
+	struct atmel_private *priv = netdev_priv(dev);
+	int i;
+	static const u8 any[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+	static const u8 off[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	unsigned long flags;
+
+	if (awrq->sa_family != ARPHRD_ETHER)
+		return -EINVAL;
+
+	if (!memcmp(any, awrq->sa_data, 6) ||
+	    !memcmp(off, awrq->sa_data, 6)) {
+		del_timer_sync(&priv->management_timer);
+		spin_lock_irqsave(&priv->irqlock, flags);
+		atmel_scan(priv, 1);
+		spin_unlock_irqrestore(&priv->irqlock, flags);
+		return 0;
+	}
+
+	for (i = 0; i < priv->BSS_list_entries; i++) {
+		if (memcmp(priv->BSSinfo[i].BSSID, awrq->sa_data, 6) == 0) {
+			if (!priv->wep_is_on && priv->BSSinfo[i].UsingWEP) {
+				return -EINVAL;
+			} else if  (priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) {
+				return -EINVAL;
+			} else {
+				del_timer_sync(&priv->management_timer);
+				spin_lock_irqsave(&priv->irqlock, flags);
+				atmel_join_bss(priv, i);
+				spin_unlock_irqrestore(&priv->irqlock, flags);
+				return 0;
+			}
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int atmel_config_commit(struct net_device *dev,
+			       struct iw_request_info *info,	/* NULL */
+			       union iwreq_data *zwrq,		/* NULL */
+			       char *extra)			/* NULL */
+{
+	return atmel_open(dev);
+}
+
+static const iw_handler atmel_handler[] =
+{
+	IW_HANDLER(SIOCSIWCOMMIT,	atmel_config_commit),
+	IW_HANDLER(SIOCGIWNAME,		atmel_get_name),
+	IW_HANDLER(SIOCSIWFREQ,		atmel_set_freq),
+	IW_HANDLER(SIOCGIWFREQ,		atmel_get_freq),
+	IW_HANDLER(SIOCSIWMODE,		atmel_set_mode),
+	IW_HANDLER(SIOCGIWMODE,		atmel_get_mode),
+	IW_HANDLER(SIOCGIWRANGE,	atmel_get_range),
+	IW_HANDLER(SIOCSIWAP,		atmel_set_wap),
+	IW_HANDLER(SIOCGIWAP,		atmel_get_wap),
+	IW_HANDLER(SIOCSIWSCAN,		atmel_set_scan),
+	IW_HANDLER(SIOCGIWSCAN,		atmel_get_scan),
+	IW_HANDLER(SIOCSIWESSID,	atmel_set_essid),
+	IW_HANDLER(SIOCGIWESSID,	atmel_get_essid),
+	IW_HANDLER(SIOCSIWRATE,		atmel_set_rate),
+	IW_HANDLER(SIOCGIWRATE,		atmel_get_rate),
+	IW_HANDLER(SIOCSIWRTS,		atmel_set_rts),
+	IW_HANDLER(SIOCGIWRTS,		atmel_get_rts),
+	IW_HANDLER(SIOCSIWFRAG,		atmel_set_frag),
+	IW_HANDLER(SIOCGIWFRAG,		atmel_get_frag),
+	IW_HANDLER(SIOCSIWRETRY,	atmel_set_retry),
+	IW_HANDLER(SIOCGIWRETRY,	atmel_get_retry),
+	IW_HANDLER(SIOCSIWENCODE,	atmel_set_encode),
+	IW_HANDLER(SIOCGIWENCODE,	atmel_get_encode),
+	IW_HANDLER(SIOCSIWPOWER,	atmel_set_power),
+	IW_HANDLER(SIOCGIWPOWER,	atmel_get_power),
+	IW_HANDLER(SIOCSIWAUTH,		atmel_set_auth),
+	IW_HANDLER(SIOCGIWAUTH,		atmel_get_auth),
+	IW_HANDLER(SIOCSIWENCODEEXT,	atmel_set_encodeext),
+	IW_HANDLER(SIOCGIWENCODEEXT,	atmel_get_encodeext),
+};
+
+static const iw_handler atmel_private_handler[] =
+{
+	NULL,				/* SIOCIWFIRSTPRIV */
+};
+
+struct atmel_priv_ioctl {
+	char id[32];
+	unsigned char __user *data;
+	unsigned short len;
+};
+
+#define ATMELFWL	SIOCIWFIRSTPRIV
+#define ATMELIDIFC	ATMELFWL + 1
+#define ATMELRD		ATMELFWL + 2
+#define ATMELMAGIC 0x51807
+#define REGDOMAINSZ 20
+
+static const struct iw_priv_args atmel_private_args[] = {
+	{
+		.cmd = ATMELFWL,
+		.set_args = IW_PRIV_TYPE_BYTE
+				| IW_PRIV_SIZE_FIXED
+				| sizeof(struct atmel_priv_ioctl),
+		.get_args = IW_PRIV_TYPE_NONE,
+		.name = "atmelfwl"
+	}, {
+		.cmd = ATMELIDIFC,
+		.set_args = IW_PRIV_TYPE_NONE,
+		.get_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+		.name = "atmelidifc"
+	}, {
+		.cmd = ATMELRD,
+		.set_args = IW_PRIV_TYPE_CHAR | REGDOMAINSZ,
+		.get_args = IW_PRIV_TYPE_NONE,
+		.name = "regdomain"
+	},
+};
+
+static const struct iw_handler_def atmel_handler_def = {
+	.num_standard	= ARRAY_SIZE(atmel_handler),
+	.num_private	= ARRAY_SIZE(atmel_private_handler),
+	.num_private_args = ARRAY_SIZE(atmel_private_args),
+	.standard	= atmel_handler,
+	.private	= atmel_private_handler,
+	.private_args	= (struct iw_priv_args *) atmel_private_args,
+	.get_wireless_stats = atmel_get_wireless_stats
+};
+
+static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	int i, rc = 0;
+	struct atmel_private *priv = netdev_priv(dev);
+	struct atmel_priv_ioctl com;
+	struct iwreq *wrq = (struct iwreq *) rq;
+	unsigned char *new_firmware;
+	char domain[REGDOMAINSZ + 1];
+
+	switch (cmd) {
+	case ATMELIDIFC:
+		wrq->u.param.value = ATMELMAGIC;
+		break;
+
+	case ATMELFWL:
+		if (copy_from_user(&com, rq->ifr_data, sizeof(com))) {
+			rc = -EFAULT;
+			break;
+		}
+
+		if (!capable(CAP_NET_ADMIN)) {
+			rc = -EPERM;
+			break;
+		}
+
+		new_firmware = memdup_user(com.data, com.len);
+		if (IS_ERR(new_firmware)) {
+			rc = PTR_ERR(new_firmware);
+			break;
+		}
+
+		kfree(priv->firmware);
+
+		priv->firmware = new_firmware;
+		priv->firmware_length = com.len;
+		strncpy(priv->firmware_id, com.id, 31);
+		priv->firmware_id[31] = '\0';
+		break;
+
+	case ATMELRD:
+		if (copy_from_user(domain, rq->ifr_data, REGDOMAINSZ)) {
+			rc = -EFAULT;
+			break;
+		}
+
+		if (!capable(CAP_NET_ADMIN)) {
+			rc = -EPERM;
+			break;
+		}
+
+		domain[REGDOMAINSZ] = 0;
+		rc = -EINVAL;
+		for (i = 0; i < ARRAY_SIZE(channel_table); i++) {
+			if (!strcasecmp(channel_table[i].name, domain)) {
+				priv->config_reg_domain = channel_table[i].reg_domain;
+				rc = 0;
+			}
+		}
+
+		if (rc == 0 &&  priv->station_state != STATION_STATE_DOWN)
+			rc = atmel_open(dev);
+		break;
+
+	default:
+		rc = -EOPNOTSUPP;
+	}
+
+	return rc;
+}
+
+struct auth_body {
+	__le16 alg;
+	__le16 trans_seq;
+	__le16 status;
+	u8 el_id;
+	u8 chall_text_len;
+	u8 chall_text[253];
+};
+
+static void atmel_enter_state(struct atmel_private *priv, int new_state)
+{
+	int old_state = priv->station_state;
+
+	if (new_state == old_state)
+		return;
+
+	priv->station_state = new_state;
+
+	if (new_state == STATION_STATE_READY) {
+		netif_start_queue(priv->dev);
+		netif_carrier_on(priv->dev);
+	}
+
+	if (old_state == STATION_STATE_READY) {
+		netif_carrier_off(priv->dev);
+		if (netif_running(priv->dev))
+			netif_stop_queue(priv->dev);
+		priv->last_beacon_timestamp = 0;
+	}
+}
+
+static void atmel_scan(struct atmel_private *priv, int specific_ssid)
+{
+	struct {
+		u8 BSSID[ETH_ALEN];
+		u8 SSID[MAX_SSID_LENGTH];
+		u8 scan_type;
+		u8 channel;
+		__le16 BSS_type;
+		__le16 min_channel_time;
+		__le16 max_channel_time;
+		u8 options;
+		u8 SSID_size;
+	} cmd;
+
+	eth_broadcast_addr(cmd.BSSID);
+
+	if (priv->fast_scan) {
+		cmd.SSID_size = priv->SSID_size;
+		memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+		cmd.min_channel_time = cpu_to_le16(10);
+		cmd.max_channel_time = cpu_to_le16(50);
+	} else {
+		priv->BSS_list_entries = 0;
+		cmd.SSID_size = 0;
+		cmd.min_channel_time = cpu_to_le16(10);
+		cmd.max_channel_time = cpu_to_le16(120);
+	}
+
+	cmd.options = 0;
+
+	if (!specific_ssid)
+		cmd.options |= SCAN_OPTIONS_SITE_SURVEY;
+
+	cmd.channel = (priv->channel & 0x7f);
+	cmd.scan_type = SCAN_TYPE_ACTIVE;
+	cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ?
+		BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE);
+
+	atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd));
+
+	/* This must come after all hardware access to avoid being messed up
+	   by stuff happening in interrupt context after we leave STATE_DOWN */
+	atmel_enter_state(priv, STATION_STATE_SCANNING);
+}
+
+static void join(struct atmel_private *priv, int type)
+{
+	struct {
+		u8 BSSID[6];
+		u8 SSID[MAX_SSID_LENGTH];
+		u8 BSS_type; /* this is a short in a scan command - weird */
+		u8 channel;
+		__le16 timeout;
+		u8 SSID_size;
+		u8 reserved;
+	} cmd;
+
+	cmd.SSID_size = priv->SSID_size;
+	memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+	memcpy(cmd.BSSID, priv->CurrentBSSID, ETH_ALEN);
+	cmd.channel = (priv->channel & 0x7f);
+	cmd.BSS_type = type;
+	cmd.timeout = cpu_to_le16(2000);
+
+	atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd));
+}
+
+static void start(struct atmel_private *priv, int type)
+{
+	struct {
+		u8 BSSID[6];
+		u8 SSID[MAX_SSID_LENGTH];
+		u8 BSS_type;
+		u8 channel;
+		u8 SSID_size;
+		u8 reserved[3];
+	} cmd;
+
+	cmd.SSID_size = priv->SSID_size;
+	memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+	memcpy(cmd.BSSID, priv->BSSID, ETH_ALEN);
+	cmd.BSS_type = type;
+	cmd.channel = (priv->channel & 0x7f);
+
+	atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd));
+}
+
+static void handle_beacon_probe(struct atmel_private *priv, u16 capability,
+				u8 channel)
+{
+	int rejoin = 0;
+	int new = capability & WLAN_CAPABILITY_SHORT_PREAMBLE ?
+		SHORT_PREAMBLE : LONG_PREAMBLE;
+
+	if (priv->preamble != new) {
+		priv->preamble = new;
+		rejoin = 1;
+		atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, new);
+	}
+
+	if (priv->channel != channel) {
+		priv->channel = channel;
+		rejoin = 1;
+		atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_CHANNEL_POS, channel);
+	}
+
+	if (rejoin) {
+		priv->station_is_associated = 0;
+		atmel_enter_state(priv, STATION_STATE_JOINNING);
+
+		if (priv->operating_mode == IW_MODE_INFRA)
+			join(priv, BSS_TYPE_INFRASTRUCTURE);
+		else
+			join(priv, BSS_TYPE_AD_HOC);
+	}
+}
+
+static void send_authentication_request(struct atmel_private *priv, u16 system,
+					u8 *challenge, int challenge_len)
+{
+	struct ieee80211_hdr header;
+	struct auth_body auth;
+
+	header.frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
+	header.duration_id = cpu_to_le16(0x8000);
+	header.seq_ctrl = 0;
+	memcpy(header.addr1, priv->CurrentBSSID, ETH_ALEN);
+	memcpy(header.addr2, priv->dev->dev_addr, ETH_ALEN);
+	memcpy(header.addr3, priv->CurrentBSSID, ETH_ALEN);
+
+	if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1)
+		/* no WEP for authentication frames with TrSeqNo 1 */
+		header.frame_control |=  cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+
+	auth.alg = cpu_to_le16(system);
+
+	auth.status = 0;
+	auth.trans_seq = cpu_to_le16(priv->CurrentAuthentTransactionSeqNum);
+	priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1;
+	priv->CurrentAuthentTransactionSeqNum += 2;
+
+	if (challenge_len != 0)	{
+		auth.el_id = 16; /* challenge_text */
+		auth.chall_text_len = challenge_len;
+		memcpy(auth.chall_text, challenge, challenge_len);
+		atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 8 + challenge_len);
+	} else {
+		atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 6);
+	}
+}
+
+static void send_association_request(struct atmel_private *priv, int is_reassoc)
+{
+	u8 *ssid_el_p;
+	int bodysize;
+	struct ieee80211_hdr header;
+	struct ass_req_format {
+		__le16 capability;
+		__le16 listen_interval;
+		u8 ap[ETH_ALEN]; /* nothing after here directly accessible */
+		u8 ssid_el_id;
+		u8 ssid_len;
+		u8 ssid[MAX_SSID_LENGTH];
+		u8 sup_rates_el_id;
+		u8 sup_rates_len;
+		u8 rates[4];
+	} body;
+
+	header.frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+		(is_reassoc ? IEEE80211_STYPE_REASSOC_REQ : IEEE80211_STYPE_ASSOC_REQ));
+	header.duration_id = cpu_to_le16(0x8000);
+	header.seq_ctrl = 0;
+
+	memcpy(header.addr1, priv->CurrentBSSID, ETH_ALEN);
+	memcpy(header.addr2, priv->dev->dev_addr, ETH_ALEN);
+	memcpy(header.addr3, priv->CurrentBSSID, ETH_ALEN);
+
+	body.capability = cpu_to_le16(WLAN_CAPABILITY_ESS);
+	if (priv->wep_is_on)
+		body.capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
+	if (priv->preamble == SHORT_PREAMBLE)
+		body.capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE);
+
+	body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period);
+
+	/* current AP address - only in reassoc frame */
+	if (is_reassoc) {
+		memcpy(body.ap, priv->CurrentBSSID, ETH_ALEN);
+		ssid_el_p = &body.ssid_el_id;
+		bodysize = 18 + priv->SSID_size;
+	} else {
+		ssid_el_p = &body.ap[0];
+		bodysize = 12 + priv->SSID_size;
+	}
+
+	ssid_el_p[0] = WLAN_EID_SSID;
+	ssid_el_p[1] = priv->SSID_size;
+	memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
+	ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
+	ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
+	memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
+
+	atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
+}
+
+static int is_frame_from_current_bss(struct atmel_private *priv,
+				     struct ieee80211_hdr *header)
+{
+	if (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FROMDS)
+		return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0;
+	else
+		return memcmp(header->addr2, priv->CurrentBSSID, 6) == 0;
+}
+
+static int retrieve_bss(struct atmel_private *priv)
+{
+	int i;
+	int max_rssi = -128;
+	int max_index = -1;
+
+	if (priv->BSS_list_entries == 0)
+		return -1;
+
+	if (priv->connect_to_any_BSS) {
+		/* Select a BSS with the max-RSSI but of the same type and of
+		   the same WEP mode and that it is not marked as 'bad' (i.e.
+		   we had previously failed to connect to this BSS with the
+		   settings that we currently use) */
+		priv->current_BSS = 0;
+		for (i = 0; i < priv->BSS_list_entries; i++) {
+			if (priv->operating_mode == priv->BSSinfo[i].BSStype &&
+			    ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) ||
+			     (priv->wep_is_on && priv->BSSinfo[i].UsingWEP)) &&
+			    !(priv->BSSinfo[i].channel & 0x80)) {
+				max_rssi = priv->BSSinfo[i].RSSI;
+				priv->current_BSS = max_index = i;
+			}
+		}
+		return max_index;
+	}
+
+	for (i = 0; i < priv->BSS_list_entries; i++) {
+		if (priv->SSID_size == priv->BSSinfo[i].SSIDsize &&
+		    memcmp(priv->SSID, priv->BSSinfo[i].SSID, priv->SSID_size) == 0 &&
+		    priv->operating_mode == priv->BSSinfo[i].BSStype &&
+		    atmel_validate_channel(priv, priv->BSSinfo[i].channel) == 0) {
+			if (priv->BSSinfo[i].RSSI >= max_rssi) {
+				max_rssi = priv->BSSinfo[i].RSSI;
+				max_index = i;
+			}
+		}
+	}
+	return max_index;
+}
+
+static void store_bss_info(struct atmel_private *priv,
+			   struct ieee80211_hdr *header, u16 capability,
+			   u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len,
+			   u8 *ssid, int is_beacon)
+{
+	u8 *bss = capability & WLAN_CAPABILITY_ESS ? header->addr2 : header->addr3;
+	int i, index;
+
+	for (index = -1, i = 0; i < priv->BSS_list_entries; i++)
+		if (memcmp(bss, priv->BSSinfo[i].BSSID, ETH_ALEN) == 0)
+			index = i;
+
+	/* If we process a probe and an entry from this BSS exists
+	   we will update the BSS entry with the info from this BSS.
+	   If we process a beacon we will only update RSSI */
+
+	if (index == -1) {
+		if (priv->BSS_list_entries == MAX_BSS_ENTRIES)
+			return;
+		index = priv->BSS_list_entries++;
+		memcpy(priv->BSSinfo[index].BSSID, bss, ETH_ALEN);
+		priv->BSSinfo[index].RSSI = rssi;
+	} else {
+		if (rssi > priv->BSSinfo[index].RSSI)
+			priv->BSSinfo[index].RSSI = rssi;
+		if (is_beacon)
+			return;
+	}
+
+	priv->BSSinfo[index].channel = channel;
+	priv->BSSinfo[index].beacon_period = beacon_period;
+	priv->BSSinfo[index].UsingWEP = capability & WLAN_CAPABILITY_PRIVACY;
+	memcpy(priv->BSSinfo[index].SSID, ssid, ssid_len);
+	priv->BSSinfo[index].SSIDsize = ssid_len;
+
+	if (capability & WLAN_CAPABILITY_IBSS)
+		priv->BSSinfo[index].BSStype = IW_MODE_ADHOC;
+	else if (capability & WLAN_CAPABILITY_ESS)
+		priv->BSSinfo[index].BSStype = IW_MODE_INFRA;
+
+	priv->BSSinfo[index].preamble = capability & WLAN_CAPABILITY_SHORT_PREAMBLE ?
+		SHORT_PREAMBLE : LONG_PREAMBLE;
+}
+
+static void authenticate(struct atmel_private *priv, u16 frame_len)
+{
+	struct auth_body *auth = (struct auth_body *)priv->rx_buf;
+	u16 status = le16_to_cpu(auth->status);
+	u16 trans_seq_no = le16_to_cpu(auth->trans_seq);
+	u16 system = le16_to_cpu(auth->alg);
+
+	if (status == WLAN_STATUS_SUCCESS && !priv->wep_is_on) {
+		/* no WEP */
+		if (priv->station_was_associated) {
+			atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
+			send_association_request(priv, 1);
+			return;
+		} else {
+			atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
+			send_association_request(priv, 0);
+			return;
+		}
+	}
+
+	if (status == WLAN_STATUS_SUCCESS && priv->wep_is_on) {
+		int should_associate = 0;
+		/* WEP */
+		if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum)
+			return;
+
+		if (system == WLAN_AUTH_OPEN) {
+			if (trans_seq_no == 0x0002) {
+				should_associate = 1;
+			}
+		} else if (system == WLAN_AUTH_SHARED_KEY) {
+			if (trans_seq_no == 0x0002 &&
+			    auth->el_id == WLAN_EID_CHALLENGE) {
+				send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len);
+				return;
+			} else if (trans_seq_no == 0x0004) {
+				should_associate = 1;
+			}
+		}
+
+		if (should_associate) {
+			if (priv->station_was_associated) {
+				atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
+				send_association_request(priv, 1);
+				return;
+			} else {
+				atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
+				send_association_request(priv, 0);
+				return;
+			}
+		}
+	}
+
+	if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
+		/* Flip back and forth between WEP auth modes until the max
+		 * authentication tries has been exceeded.
+		 */
+		if (system == WLAN_AUTH_OPEN) {
+			priv->CurrentAuthentTransactionSeqNum = 0x001;
+			priv->exclude_unencrypted = 1;
+			send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0);
+			return;
+		} else if (system == WLAN_AUTH_SHARED_KEY
+			   && priv->wep_is_on) {
+			priv->CurrentAuthentTransactionSeqNum = 0x001;
+			priv->exclude_unencrypted = 0;
+			send_authentication_request(priv, WLAN_AUTH_OPEN, NULL, 0);
+			return;
+		} else if (priv->connect_to_any_BSS) {
+			int bss_index;
+
+			priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+			if ((bss_index  = retrieve_bss(priv)) != -1) {
+				atmel_join_bss(priv, bss_index);
+				return;
+			}
+		}
+	}
+
+	priv->AuthenticationRequestRetryCnt = 0;
+	atmel_enter_state(priv,  STATION_STATE_MGMT_ERROR);
+	priv->station_is_associated = 0;
+}
+
+static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype)
+{
+	struct ass_resp_format {
+		__le16 capability;
+		__le16 status;
+		__le16 ass_id;
+		u8 el_id;
+		u8 length;
+		u8 rates[4];
+	} *ass_resp = (struct ass_resp_format *)priv->rx_buf;
+
+	u16 status = le16_to_cpu(ass_resp->status);
+	u16 ass_id = le16_to_cpu(ass_resp->ass_id);
+	u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length;
+
+	union iwreq_data wrqu;
+
+	if (frame_len < 8 + rates_len)
+		return;
+
+	if (status == WLAN_STATUS_SUCCESS) {
+		if (subtype == IEEE80211_STYPE_ASSOC_RESP)
+			priv->AssociationRequestRetryCnt = 0;
+		else
+			priv->ReAssociationRequestRetryCnt = 0;
+
+		atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+				MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff);
+		atmel_set_mib(priv, Phy_Mib_Type,
+			      PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len);
+		if (priv->power_mode == 0) {
+			priv->listen_interval = 1;
+			atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+				       MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+			atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+					MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+		} else {
+			priv->listen_interval = 2;
+			atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+				       MAC_MGMT_MIB_PS_MODE_POS,  PS_MODE);
+			atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+					MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2);
+		}
+
+		priv->station_is_associated = 1;
+		priv->station_was_associated = 1;
+		atmel_enter_state(priv, STATION_STATE_READY);
+
+		/* Send association event to userspace */
+		wrqu.data.length = 0;
+		wrqu.data.flags = 0;
+		memcpy(wrqu.ap_addr.sa_data, priv->CurrentBSSID, ETH_ALEN);
+		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+		wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+
+		return;
+	}
+
+	if (subtype == IEEE80211_STYPE_ASSOC_RESP &&
+	    status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+	    status != WLAN_STATUS_CAPS_UNSUPPORTED &&
+	    priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
+		mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+		priv->AssociationRequestRetryCnt++;
+		send_association_request(priv, 0);
+		return;
+	}
+
+	if (subtype == IEEE80211_STYPE_REASSOC_RESP &&
+	    status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+	    status != WLAN_STATUS_CAPS_UNSUPPORTED &&
+	    priv->ReAssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
+		mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+		priv->ReAssociationRequestRetryCnt++;
+		send_association_request(priv, 1);
+		return;
+	}
+
+	atmel_enter_state(priv,  STATION_STATE_MGMT_ERROR);
+	priv->station_is_associated = 0;
+
+	if (priv->connect_to_any_BSS) {
+		int bss_index;
+		priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+		if ((bss_index = retrieve_bss(priv)) != -1)
+			atmel_join_bss(priv, bss_index);
+	}
+}
+
+static void atmel_join_bss(struct atmel_private *priv, int bss_index)
+{
+	struct bss_info *bss =  &priv->BSSinfo[bss_index];
+
+	memcpy(priv->CurrentBSSID, bss->BSSID, ETH_ALEN);
+	memcpy(priv->SSID, bss->SSID, priv->SSID_size = bss->SSIDsize);
+
+	/* The WPA stuff cares about the current AP address */
+	if (priv->use_wpa)
+		build_wpa_mib(priv);
+
+	/* When switching to AdHoc turn OFF Power Save if needed */
+
+	if (bss->BSStype == IW_MODE_ADHOC &&
+	    priv->operating_mode != IW_MODE_ADHOC &&
+	    priv->power_mode) {
+		priv->power_mode = 0;
+		priv->listen_interval = 1;
+		atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+			       MAC_MGMT_MIB_PS_MODE_POS,  ACTIVE_MODE);
+		atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+				MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+	}
+
+	priv->operating_mode = bss->BSStype;
+	priv->channel = bss->channel & 0x7f;
+	priv->beacon_period = bss->beacon_period;
+
+	if (priv->preamble != bss->preamble) {
+		priv->preamble = bss->preamble;
+		atmel_set_mib8(priv, Local_Mib_Type,
+			       LOCAL_MIB_PREAMBLE_TYPE, bss->preamble);
+	}
+
+	if (!priv->wep_is_on && bss->UsingWEP) {
+		atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+		priv->station_is_associated = 0;
+		return;
+	}
+
+	if (priv->wep_is_on && !bss->UsingWEP) {
+		atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+		priv->station_is_associated = 0;
+		return;
+	}
+
+	atmel_enter_state(priv, STATION_STATE_JOINNING);
+
+	if (priv->operating_mode == IW_MODE_INFRA)
+		join(priv, BSS_TYPE_INFRASTRUCTURE);
+	else
+		join(priv, BSS_TYPE_AD_HOC);
+}
+
+static void restart_search(struct atmel_private *priv)
+{
+	int bss_index;
+
+	if (!priv->connect_to_any_BSS) {
+		atmel_scan(priv, 1);
+	} else {
+		priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+		if ((bss_index = retrieve_bss(priv)) != -1)
+			atmel_join_bss(priv, bss_index);
+		else
+			atmel_scan(priv, 0);
+	}
+}
+
+static void smooth_rssi(struct atmel_private *priv, u8 rssi)
+{
+	u8 old = priv->wstats.qual.level;
+	u8 max_rssi = 42; /* 502-rmfd-revd max by experiment, default for now */
+
+	switch (priv->firmware_type) {
+	case ATMEL_FW_TYPE_502E:
+		max_rssi = 63; /* 502-rmfd-reve max by experiment */
+		break;
+	default:
+		break;
+	}
+
+	rssi = rssi * 100 / max_rssi;
+	if ((rssi + old) % 2)
+		priv->wstats.qual.level = (rssi + old) / 2 + 1;
+	else
+		priv->wstats.qual.level = (rssi + old) / 2;
+	priv->wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
+	priv->wstats.qual.updated &= ~IW_QUAL_LEVEL_INVALID;
+}
+
+static void atmel_smooth_qual(struct atmel_private *priv)
+{
+	unsigned long time_diff = (jiffies - priv->last_qual) / HZ;
+	while (time_diff--) {
+		priv->last_qual += HZ;
+		priv->wstats.qual.qual = priv->wstats.qual.qual / 2;
+		priv->wstats.qual.qual +=
+			priv->beacons_this_sec * priv->beacon_period * (priv->wstats.qual.level + 100) / 4000;
+		priv->beacons_this_sec = 0;
+	}
+	priv->wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
+	priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
+}
+
+/* deals with incoming management frames. */
+static void atmel_management_frame(struct atmel_private *priv,
+				   struct ieee80211_hdr *header,
+				   u16 frame_len, u8 rssi)
+{
+	u16 subtype;
+
+	subtype = le16_to_cpu(header->frame_control) & IEEE80211_FCTL_STYPE;
+	switch (subtype) {
+	case IEEE80211_STYPE_BEACON:
+	case IEEE80211_STYPE_PROBE_RESP:
+
+		/* beacon frame has multiple variable-length fields -
+		   never let an engineer loose with a data structure design. */
+		{
+			struct beacon_format {
+				__le64 timestamp;
+				__le16 interval;
+				__le16 capability;
+				u8 ssid_el_id;
+				u8 ssid_length;
+				/* ssid here */
+				u8 rates_el_id;
+				u8 rates_length;
+				/* rates here */
+				u8 ds_el_id;
+				u8 ds_length;
+				/* ds here */
+			} *beacon = (struct beacon_format *)priv->rx_buf;
+
+			u8 channel, rates_length, ssid_length;
+			u64 timestamp = le64_to_cpu(beacon->timestamp);
+			u16 beacon_interval = le16_to_cpu(beacon->interval);
+			u16 capability = le16_to_cpu(beacon->capability);
+			u8 *beaconp = priv->rx_buf;
+			ssid_length = beacon->ssid_length;
+			/* this blows chunks. */
+			if (frame_len < 14 || frame_len < ssid_length + 15)
+				return;
+			rates_length = beaconp[beacon->ssid_length + 15];
+			if (frame_len < ssid_length + rates_length + 18)
+				return;
+			if (ssid_length >  MAX_SSID_LENGTH)
+				return;
+			channel = beaconp[ssid_length + rates_length + 18];
+
+			if (priv->station_state == STATION_STATE_READY) {
+				smooth_rssi(priv, rssi);
+				if (is_frame_from_current_bss(priv, header)) {
+					priv->beacons_this_sec++;
+					atmel_smooth_qual(priv);
+					if (priv->last_beacon_timestamp) {
+						/* Note truncate this to 32 bits - kernel can't divide a long */
+						u32 beacon_delay = timestamp - priv->last_beacon_timestamp;
+						int beacons = beacon_delay / (beacon_interval * 1000);
+						if (beacons > 1)
+							priv->wstats.miss.beacon += beacons - 1;
+					}
+					priv->last_beacon_timestamp = timestamp;
+					handle_beacon_probe(priv, capability, channel);
+				}
+			}
+
+			if (priv->station_state == STATION_STATE_SCANNING)
+				store_bss_info(priv, header, capability,
+					       beacon_interval, channel, rssi,
+					       ssid_length,
+					       &beacon->rates_el_id,
+					       subtype == IEEE80211_STYPE_BEACON);
+		}
+		break;
+
+	case IEEE80211_STYPE_AUTH:
+
+		if (priv->station_state == STATION_STATE_AUTHENTICATING)
+			authenticate(priv, frame_len);
+
+		break;
+
+	case IEEE80211_STYPE_ASSOC_RESP:
+	case IEEE80211_STYPE_REASSOC_RESP:
+
+		if (priv->station_state == STATION_STATE_ASSOCIATING ||
+		    priv->station_state == STATION_STATE_REASSOCIATING)
+			associate(priv, frame_len, subtype);
+
+		break;
+
+	case IEEE80211_STYPE_DISASSOC:
+		if (priv->station_is_associated &&
+		    priv->operating_mode == IW_MODE_INFRA &&
+		    is_frame_from_current_bss(priv, header)) {
+			priv->station_was_associated = 0;
+			priv->station_is_associated = 0;
+
+			atmel_enter_state(priv, STATION_STATE_JOINNING);
+			join(priv, BSS_TYPE_INFRASTRUCTURE);
+		}
+
+		break;
+
+	case IEEE80211_STYPE_DEAUTH:
+		if (priv->operating_mode == IW_MODE_INFRA &&
+		    is_frame_from_current_bss(priv, header)) {
+			priv->station_was_associated = 0;
+
+			atmel_enter_state(priv, STATION_STATE_JOINNING);
+			join(priv, BSS_TYPE_INFRASTRUCTURE);
+		}
+
+		break;
+	}
+}
+
+/* run when timer expires */
+static void atmel_management_timer(struct timer_list *t)
+{
+	struct atmel_private *priv = from_timer(priv, t, management_timer);
+	unsigned long flags;
+
+	/* Check if the card has been yanked. */
+	if (priv->card && priv->present_callback &&
+		!(*priv->present_callback)(priv->card))
+		return;
+
+	spin_lock_irqsave(&priv->irqlock, flags);
+
+	switch (priv->station_state) {
+
+	case STATION_STATE_AUTHENTICATING:
+		if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) {
+			atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+			priv->station_is_associated = 0;
+			priv->AuthenticationRequestRetryCnt = 0;
+			restart_search(priv);
+		} else {
+			int auth = WLAN_AUTH_OPEN;
+			priv->AuthenticationRequestRetryCnt++;
+			priv->CurrentAuthentTransactionSeqNum = 0x0001;
+			mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+			if (priv->wep_is_on && priv->exclude_unencrypted)
+				auth = WLAN_AUTH_SHARED_KEY;
+			send_authentication_request(priv, auth, NULL, 0);
+	  }
+	  break;
+
+	case STATION_STATE_ASSOCIATING:
+		if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+			atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+			priv->station_is_associated = 0;
+			priv->AssociationRequestRetryCnt = 0;
+			restart_search(priv);
+		} else {
+			priv->AssociationRequestRetryCnt++;
+			mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+			send_association_request(priv, 0);
+		}
+	  break;
+
+	case STATION_STATE_REASSOCIATING:
+		if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+			atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+			priv->station_is_associated = 0;
+			priv->ReAssociationRequestRetryCnt = 0;
+			restart_search(priv);
+		} else {
+			priv->ReAssociationRequestRetryCnt++;
+			mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+			send_association_request(priv, 1);
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	spin_unlock_irqrestore(&priv->irqlock, flags);
+}
+
+static void atmel_command_irq(struct atmel_private *priv)
+{
+	u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
+	u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET));
+	int fast_scan;
+	union iwreq_data wrqu;
+
+	if (status == CMD_STATUS_IDLE ||
+	    status == CMD_STATUS_IN_PROGRESS)
+		return;
+
+	switch (command) {
+	case CMD_Start:
+		if (status == CMD_STATUS_COMPLETE) {
+			priv->station_was_associated = priv->station_is_associated;
+			atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
+				      (u8 *)priv->CurrentBSSID, 6);
+			atmel_enter_state(priv, STATION_STATE_READY);
+		}
+		break;
+
+	case CMD_Scan:
+		fast_scan = priv->fast_scan;
+		priv->fast_scan = 0;
+
+		if (status != CMD_STATUS_COMPLETE) {
+			atmel_scan(priv, 1);
+		} else {
+			int bss_index = retrieve_bss(priv);
+			int notify_scan_complete = 1;
+			if (bss_index != -1) {
+				atmel_join_bss(priv, bss_index);
+			} else if (priv->operating_mode == IW_MODE_ADHOC &&
+				   priv->SSID_size != 0) {
+				start(priv, BSS_TYPE_AD_HOC);
+			} else {
+				priv->fast_scan = !fast_scan;
+				atmel_scan(priv, 1);
+				notify_scan_complete = 0;
+			}
+			priv->site_survey_state = SITE_SURVEY_COMPLETED;
+			if (notify_scan_complete) {
+				wrqu.data.length = 0;
+				wrqu.data.flags = 0;
+				wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
+			}
+		}
+		break;
+
+	case CMD_SiteSurvey:
+		priv->fast_scan = 0;
+
+		if (status != CMD_STATUS_COMPLETE)
+			return;
+
+		priv->site_survey_state = SITE_SURVEY_COMPLETED;
+		if (priv->station_is_associated) {
+			atmel_enter_state(priv, STATION_STATE_READY);
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
+		} else {
+			atmel_scan(priv, 1);
+		}
+		break;
+
+	case CMD_Join:
+		if (status == CMD_STATUS_COMPLETE) {
+			if (priv->operating_mode == IW_MODE_ADHOC) {
+				priv->station_was_associated = priv->station_is_associated;
+				atmel_enter_state(priv, STATION_STATE_READY);
+			} else {
+				int auth = WLAN_AUTH_OPEN;
+				priv->AuthenticationRequestRetryCnt = 0;
+				atmel_enter_state(priv, STATION_STATE_AUTHENTICATING);
+
+				mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+				priv->CurrentAuthentTransactionSeqNum = 0x0001;
+				if (priv->wep_is_on && priv->exclude_unencrypted)
+					auth = WLAN_AUTH_SHARED_KEY;
+				send_authentication_request(priv, auth, NULL, 0);
+			}
+			return;
+		}
+
+		atmel_scan(priv, 1);
+	}
+}
+
+static int atmel_wakeup_firmware(struct atmel_private *priv)
+{
+	struct host_info_struct *iface = &priv->host_info;
+	u16 mr1, mr3;
+	int i;
+
+	if (priv->card_type == CARD_TYPE_SPI_FLASH)
+		atmel_set_gcr(priv->dev, GCR_REMAP);
+
+	/* wake up on-board processor */
+	atmel_clear_gcr(priv->dev, 0x0040);
+	atmel_write16(priv->dev, BSR, BSS_SRAM);
+
+	if (priv->card_type == CARD_TYPE_SPI_FLASH)
+		mdelay(100);
+
+	/* and wait for it */
+	for (i = LOOP_RETRY_LIMIT; i; i--) {
+		mr1 = atmel_read16(priv->dev, MR1);
+		mr3 = atmel_read16(priv->dev, MR3);
+
+		if (mr3 & MAC_BOOT_COMPLETE)
+			break;
+		if (mr1 & MAC_BOOT_COMPLETE &&
+		    priv->bus_type == BUS_TYPE_PCCARD)
+			break;
+	}
+
+	if (i == 0) {
+		printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
+		return -EIO;
+	}
+
+	if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
+		printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
+		return -ENODEV;
+	}
+
+	/* now check for completion of MAC initialization through
+	   the FunCtrl field of the IFACE, poll MR1 to detect completion of
+	   MAC initialization, check completion status, set interrupt mask,
+	   enables interrupts and calls Tx and Rx initialization functions */
+
+	atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), FUNC_CTRL_INIT_COMPLETE);
+
+	for (i = LOOP_RETRY_LIMIT; i; i--) {
+		mr1 = atmel_read16(priv->dev, MR1);
+		mr3 = atmel_read16(priv->dev, MR3);
+
+		if (mr3 & MAC_INIT_COMPLETE)
+			break;
+		if (mr1 & MAC_INIT_COMPLETE &&
+		    priv->bus_type == BUS_TYPE_PCCARD)
+			break;
+	}
+
+	if (i == 0) {
+		printk(KERN_ALERT "%s: MAC failed to initialise.\n",
+				priv->dev->name);
+		return -EIO;
+	}
+
+	/* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
+	if ((mr3 & MAC_INIT_COMPLETE) &&
+	    !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
+		printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
+		return -EIO;
+	}
+	if ((mr1 & MAC_INIT_COMPLETE) &&
+	    !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
+		printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
+		return -EIO;
+	}
+
+	atmel_copy_to_host(priv->dev, (unsigned char *)iface,
+			   priv->host_info_base, sizeof(*iface));
+
+	iface->tx_buff_pos = le16_to_cpu(iface->tx_buff_pos);
+	iface->tx_buff_size = le16_to_cpu(iface->tx_buff_size);
+	iface->tx_desc_pos = le16_to_cpu(iface->tx_desc_pos);
+	iface->tx_desc_count = le16_to_cpu(iface->tx_desc_count);
+	iface->rx_buff_pos = le16_to_cpu(iface->rx_buff_pos);
+	iface->rx_buff_size = le16_to_cpu(iface->rx_buff_size);
+	iface->rx_desc_pos = le16_to_cpu(iface->rx_desc_pos);
+	iface->rx_desc_count = le16_to_cpu(iface->rx_desc_count);
+	iface->build_version = le16_to_cpu(iface->build_version);
+	iface->command_pos = le16_to_cpu(iface->command_pos);
+	iface->major_version = le16_to_cpu(iface->major_version);
+	iface->minor_version = le16_to_cpu(iface->minor_version);
+	iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
+	iface->mac_status = le16_to_cpu(iface->mac_status);
+
+	return 0;
+}
+
+/* determine type of memory and MAC address */
+static int probe_atmel_card(struct net_device *dev)
+{
+	int rc = 0;
+	struct atmel_private *priv = netdev_priv(dev);
+	u8 addr[ETH_ALEN] = {};
+
+	/* reset pccard */
+	if (priv->bus_type == BUS_TYPE_PCCARD)
+		atmel_write16(dev, GCR, 0x0060);
+
+	atmel_write16(dev, GCR, 0x0040);
+	msleep(500);
+
+	if (atmel_read16(dev, MR2) == 0) {
+		/* No stored firmware so load a small stub which just
+		   tells us the MAC address */
+		int i;
+		priv->card_type = CARD_TYPE_EEPROM;
+		atmel_write16(dev, BSR, BSS_IRAM);
+		atmel_copy_to_card(dev, 0, mac_reader, sizeof(mac_reader));
+		atmel_set_gcr(dev, GCR_REMAP);
+		atmel_clear_gcr(priv->dev, 0x0040);
+		atmel_write16(dev, BSR, BSS_SRAM);
+		for (i = LOOP_RETRY_LIMIT; i; i--)
+			if (atmel_read16(dev, MR3) & MAC_BOOT_COMPLETE)
+				break;
+		if (i == 0) {
+			printk(KERN_ALERT "%s: MAC failed to boot MAC address reader.\n", dev->name);
+		} else {
+
+			atmel_copy_to_host(dev, addr, atmel_read16(dev, MR2), 6);
+			eth_hw_addr_set(dev, addr);
+			/* got address, now squash it again until the network
+			   interface is opened */
+			if (priv->bus_type == BUS_TYPE_PCCARD)
+				atmel_write16(dev, GCR, 0x0060);
+			atmel_write16(dev, GCR, 0x0040);
+			rc = 1;
+		}
+	} else if (atmel_read16(dev, MR4) == 0) {
+		/* Mac address easy in this case. */
+		priv->card_type = CARD_TYPE_PARALLEL_FLASH;
+		atmel_write16(dev,  BSR, 1);
+		atmel_copy_to_host(dev, addr, 0xc000, 6);
+		eth_hw_addr_set(dev, addr);
+		atmel_write16(dev,  BSR, 0x200);
+		rc = 1;
+	} else {
+		/* Standard firmware in flash, boot it up and ask
+		   for the Mac Address */
+		priv->card_type = CARD_TYPE_SPI_FLASH;
+		if (atmel_wakeup_firmware(priv) == 0) {
+			atmel_get_mib(priv, Mac_Address_Mib_Type, 0, addr, 6);
+			eth_hw_addr_set(dev, addr);
+
+			/* got address, now squash it again until the network
+			   interface is opened */
+			if (priv->bus_type == BUS_TYPE_PCCARD)
+				atmel_write16(dev, GCR, 0x0060);
+			atmel_write16(dev, GCR, 0x0040);
+			rc = 1;
+		}
+	}
+
+	if (rc) {
+		if (dev->dev_addr[0] == 0xFF) {
+			static const u8 default_mac[] = {
+				0x00, 0x04, 0x25, 0x00, 0x00, 0x00
+			};
+			printk(KERN_ALERT "%s: *** Invalid MAC address. UPGRADE Firmware ****\n", dev->name);
+			eth_hw_addr_set(dev, default_mac);
+		}
+	}
+
+	return rc;
+}
+
+/* Move the encyption information on the MIB structure.
+   This routine is for the pre-WPA firmware: later firmware has
+   a different format MIB and a different routine. */
+static void build_wep_mib(struct atmel_private *priv)
+{
+	struct { /* NB this is matched to the hardware, don't change. */
+		u8 wep_is_on;
+		u8 default_key; /* 0..3 */
+		u8 reserved;
+		u8 exclude_unencrypted;
+
+		u32 WEPICV_error_count;
+		u32 WEP_excluded_count;
+
+		u8 wep_keys[MAX_ENCRYPTION_KEYS][13];
+		u8 encryption_level; /* 0, 1, 2 */
+		u8 reserved2[3];
+	} mib;
+	int i;
+
+	mib.wep_is_on = priv->wep_is_on;
+	if (priv->wep_is_on) {
+		if (priv->wep_key_len[priv->default_key] > 5)
+			mib.encryption_level = 2;
+		else
+			mib.encryption_level = 1;
+	} else {
+		mib.encryption_level = 0;
+	}
+
+	mib.default_key = priv->default_key;
+	mib.exclude_unencrypted = priv->exclude_unencrypted;
+
+	for (i = 0; i < MAX_ENCRYPTION_KEYS; i++)
+		memcpy(mib.wep_keys[i], priv->wep_keys[i], 13);
+
+	atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
+}
+
+static void build_wpa_mib(struct atmel_private *priv)
+{
+	/* This is for the later (WPA enabled) firmware. */
+
+	struct { /* NB this is matched to the hardware, don't change. */
+		u8 cipher_default_key_value[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
+		u8 receiver_address[ETH_ALEN];
+		u8 wep_is_on;
+		u8 default_key; /* 0..3 */
+		u8 group_key;
+		u8 exclude_unencrypted;
+		u8 encryption_type;
+		u8 reserved;
+
+		u32 WEPICV_error_count;
+		u32 WEP_excluded_count;
+
+		u8 key_RSC[4][8];
+	} mib;
+
+	int i;
+
+	mib.wep_is_on = priv->wep_is_on;
+	mib.exclude_unencrypted = priv->exclude_unencrypted;
+	memcpy(mib.receiver_address, priv->CurrentBSSID, ETH_ALEN);
+
+	/* zero all the keys before adding in valid ones. */
+	memset(mib.cipher_default_key_value, 0, sizeof(mib.cipher_default_key_value));
+
+	if (priv->wep_is_on) {
+		/* There's a comment in the Atmel code to the effect that this
+		   is only valid when still using WEP, it may need to be set to
+		   something to use WPA */
+		memset(mib.key_RSC, 0, sizeof(mib.key_RSC));
+
+		mib.default_key = mib.group_key = 255;
+		for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) {
+			if (priv->wep_key_len[i] > 0) {
+				memcpy(mib.cipher_default_key_value[i], priv->wep_keys[i], MAX_ENCRYPTION_KEY_SIZE);
+				if (i == priv->default_key) {
+					mib.default_key = i;
+					mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 7;
+					mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite;
+				} else {
+					mib.group_key = i;
+					priv->group_cipher_suite = priv->pairwise_cipher_suite;
+					mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 1;
+					mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite;
+				}
+			}
+		}
+		if (mib.default_key == 255)
+			mib.default_key = mib.group_key != 255 ? mib.group_key : 0;
+		if (mib.group_key == 255)
+			mib.group_key = mib.default_key;
+
+	}
+
+	atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
+}
+
+static int reset_atmel_card(struct net_device *dev)
+{
+	/* do everything necessary to wake up the hardware, including
+	   waiting for the lightning strike and throwing the knife switch....
+
+	   set all the Mib values which matter in the card to match
+	   their settings in the atmel_private structure. Some of these
+	   can be altered on the fly, but many (WEP, infrastructure or ad-hoc)
+	   can only be changed by tearing down the world and coming back through
+	   here.
+
+	   This routine is also responsible for initialising some
+	   hardware-specific fields in the atmel_private structure,
+	   including a copy of the firmware's hostinfo structure
+	   which is the route into the rest of the firmware datastructures. */
+
+	struct atmel_private *priv = netdev_priv(dev);
+	u8 configuration;
+	int old_state = priv->station_state;
+	int err = 0;
+
+	/* data to add to the firmware names, in priority order
+	   this implemenents firmware versioning */
+
+	static char *firmware_modifier[] = {
+		"-wpa",
+		"",
+		NULL
+	};
+
+	/* reset pccard */
+	if (priv->bus_type == BUS_TYPE_PCCARD)
+		atmel_write16(priv->dev, GCR, 0x0060);
+
+	/* stop card , disable interrupts */
+	atmel_write16(priv->dev, GCR, 0x0040);
+
+	if (priv->card_type == CARD_TYPE_EEPROM) {
+		/* copy in firmware if needed */
+		const struct firmware *fw_entry = NULL;
+		const unsigned char *fw;
+		int len = priv->firmware_length;
+		if (!(fw = priv->firmware)) {
+			if (priv->firmware_type == ATMEL_FW_TYPE_NONE) {
+				if (strlen(priv->firmware_id) == 0) {
+					printk(KERN_INFO
+					       "%s: card type is unknown: assuming at76c502 firmware is OK.\n",
+					       dev->name);
+					printk(KERN_INFO
+					       "%s: if not, use the firmware= module parameter.\n",
+					       dev->name);
+					strcpy(priv->firmware_id, "atmel_at76c502.bin");
+				}
+				err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev);
+				if (err != 0) {
+					printk(KERN_ALERT
+					       "%s: firmware %s is missing, cannot continue.\n",
+					       dev->name, priv->firmware_id);
+					return err;
+				}
+			} else {
+				int fw_index = 0;
+				int success = 0;
+
+				/* get firmware filename entry based on firmware type ID */
+				while (fw_table[fw_index].fw_type != priv->firmware_type
+						&& fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE)
+					fw_index++;
+
+				/* construct the actual firmware file name */
+				if (fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) {
+					int i;
+					for (i = 0; firmware_modifier[i]; i++) {
+						snprintf(priv->firmware_id, 32, "%s%s.%s", fw_table[fw_index].fw_file,
+							firmware_modifier[i], fw_table[fw_index].fw_file_ext);
+						priv->firmware_id[31] = '\0';
+						if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) == 0) {
+							success = 1;
+							break;
+						}
+					}
+				}
+				if (!success) {
+					printk(KERN_ALERT
+					       "%s: firmware %s is missing, cannot start.\n",
+					       dev->name, priv->firmware_id);
+					priv->firmware_id[0] = '\0';
+					return -ENOENT;
+				}
+			}
+
+			fw = fw_entry->data;
+			len = fw_entry->size;
+		}
+
+		if (len <= 0x6000) {
+			atmel_write16(priv->dev, BSR, BSS_IRAM);
+			atmel_copy_to_card(priv->dev, 0, fw, len);
+			atmel_set_gcr(priv->dev, GCR_REMAP);
+		} else {
+			/* Remap */
+			atmel_set_gcr(priv->dev, GCR_REMAP);
+			atmel_write16(priv->dev, BSR, BSS_IRAM);
+			atmel_copy_to_card(priv->dev, 0, fw, 0x6000);
+			atmel_write16(priv->dev, BSR, 0x2ff);
+			atmel_copy_to_card(priv->dev, 0x8000, &fw[0x6000], len - 0x6000);
+		}
+
+		release_firmware(fw_entry);
+	}
+
+	err = atmel_wakeup_firmware(priv);
+	if (err != 0)
+		return err;
+
+	/* Check the version and set the correct flag for wpa stuff,
+	   old and new firmware is incompatible.
+	   The pre-wpa 3com firmware reports major version 5,
+	   the wpa 3com firmware is major version 4 and doesn't need
+	   the 3com broken-ness filter. */
+	priv->use_wpa = (priv->host_info.major_version == 4);
+	priv->radio_on_broken = (priv->host_info.major_version == 5);
+
+	/* unmask all irq sources */
+	atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff);
+
+	/* int Tx system and enable Tx */
+	atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, 0), 0);
+	atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, 0), 0x80000000L);
+	atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, 0), 0);
+	atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, 0), 0);
+
+	priv->tx_desc_free = priv->host_info.tx_desc_count;
+	priv->tx_desc_head = 0;
+	priv->tx_desc_tail = 0;
+	priv->tx_desc_previous = 0;
+	priv->tx_free_mem = priv->host_info.tx_buff_size;
+	priv->tx_buff_head = 0;
+	priv->tx_buff_tail = 0;
+
+	configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+	atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+				   configuration | FUNC_CTRL_TxENABLE);
+
+	/* init Rx system and enable */
+	priv->rx_desc_head = 0;
+
+	configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+	atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+				   configuration | FUNC_CTRL_RxENABLE);
+
+	if (!priv->radio_on_broken) {
+		if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
+		    CMD_STATUS_REJECTED_RADIO_OFF) {
+			printk(KERN_INFO "%s: cannot turn the radio on.\n",
+			       dev->name);
+			return -EIO;
+		}
+	}
+
+	/* set up enough MIB values to run. */
+	atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_AUTO_TX_RATE_POS, priv->auto_tx_rate);
+	atmel_set_mib8(priv, Local_Mib_Type,  LOCAL_MIB_TX_PROMISCUOUS_POS,  PROM_MODE_OFF);
+	atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_RTS_THRESHOLD_POS, priv->rts_threshold);
+	atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_FRAG_THRESHOLD_POS, priv->frag_threshold);
+	atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_SHORT_RETRY_POS, priv->short_retry);
+	atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_LONG_RETRY_POS, priv->long_retry);
+	atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, priv->preamble);
+	atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS,
+		      priv->dev->dev_addr, 6);
+	atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+	atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+	atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_BEACON_PER_POS, priv->default_beacon_period);
+	atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, atmel_basic_rates, 4);
+	atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_PRIVACY_POS, priv->wep_is_on);
+	if (priv->use_wpa)
+		build_wpa_mib(priv);
+	else
+		build_wep_mib(priv);
+
+	if (old_state == STATION_STATE_READY) {
+		union iwreq_data wrqu;
+
+		wrqu.data.length = 0;
+		wrqu.data.flags = 0;
+		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+		eth_zero_addr(wrqu.ap_addr.sa_data);
+		wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+	}
+
+	return 0;
+}
+
+static void atmel_send_command(struct atmel_private *priv, int command,
+			       void *cmd, int cmd_size)
+{
+	if (cmd)
+		atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET),
+				   cmd, cmd_size);
+
+	atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET), command);
+	atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET), 0);
+}
+
+static int atmel_send_command_wait(struct atmel_private *priv, int command,
+				   void *cmd, int cmd_size)
+{
+	int i, status;
+
+	atmel_send_command(priv, command, cmd, cmd_size);
+
+	for (i = 5000; i; i--) {
+		status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
+		if (status != CMD_STATUS_IDLE &&
+		    status != CMD_STATUS_IN_PROGRESS)
+			break;
+		udelay(20);
+	}
+
+	if (i == 0) {
+		printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name);
+		status =  CMD_STATUS_HOST_ERROR;
+	} else {
+		if (command != CMD_EnableRadio)
+			status = CMD_STATUS_COMPLETE;
+	}
+
+	return status;
+}
+
+static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index)
+{
+	struct get_set_mib m;
+	m.type = type;
+	m.size = 1;
+	m.index = index;
+
+	atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + 1);
+	return atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE));
+}
+
+static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data)
+{
+	struct get_set_mib m;
+	m.type = type;
+	m.size = 1;
+	m.index = index;
+	m.data[0] = data;
+
+	atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 1);
+}
+
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index,
+			    u16 data)
+{
+	struct get_set_mib m;
+	m.type = type;
+	m.size = 2;
+	m.index = index;
+	m.data[0] = data;
+	m.data[1] = data >> 8;
+
+	atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 2);
+}
+
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index,
+			  const u8 *data, int data_len)
+{
+	struct get_set_mib m;
+	m.type = type;
+	m.size = data_len;
+	m.index = index;
+
+	if (data_len > MIB_MAX_DATA_BYTES)
+		printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
+
+	memcpy(m.data, data, data_len);
+	atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
+}
+
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index,
+			  u8 *data, int data_len)
+{
+	struct get_set_mib m;
+	m.type = type;
+	m.size = data_len;
+	m.index = index;
+
+	if (data_len > MIB_MAX_DATA_BYTES)
+		printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
+
+	atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
+	atmel_copy_to_host(priv->dev, data,
+			   atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE), data_len);
+}
+
+static void atmel_writeAR(struct net_device *dev, u16 data)
+{
+	int i;
+	outw(data, dev->base_addr + AR);
+	/* Address register appears to need some convincing..... */
+	for (i = 0; data != inw(dev->base_addr + AR) && i < 10; i++)
+		outw(data, dev->base_addr + AR);
+}
+
+static void atmel_copy_to_card(struct net_device *dev, u16 dest,
+			       const unsigned char *src, u16 len)
+{
+	int i;
+	atmel_writeAR(dev, dest);
+	if (dest % 2) {
+		atmel_write8(dev, DR, *src);
+		src++; len--;
+	}
+	for (i = len; i > 1 ; i -= 2) {
+		u8 lb = *src++;
+		u8 hb = *src++;
+		atmel_write16(dev, DR, lb | (hb << 8));
+	}
+	if (i)
+		atmel_write8(dev, DR, *src);
+}
+
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest,
+			       u16 src, u16 len)
+{
+	int i;
+	atmel_writeAR(dev, src);
+	if (src % 2) {
+		*dest = atmel_read8(dev, DR);
+		dest++; len--;
+	}
+	for (i = len; i > 1 ; i -= 2) {
+		u16 hw = atmel_read16(dev, DR);
+		*dest++ = hw;
+		*dest++ = hw >> 8;
+	}
+	if (i)
+		*dest = atmel_read8(dev, DR);
+}
+
+static void atmel_set_gcr(struct net_device *dev, u16 mask)
+{
+	outw(inw(dev->base_addr + GCR) | mask, dev->base_addr + GCR);
+}
+
+static void atmel_clear_gcr(struct net_device *dev, u16 mask)
+{
+	outw(inw(dev->base_addr + GCR) & ~mask, dev->base_addr + GCR);
+}
+
+static int atmel_lock_mac(struct atmel_private *priv)
+{
+	int i, j = 20;
+ retry:
+	for (i = 5000; i; i--) {
+		if (!atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET)))
+			break;
+		udelay(20);
+	}
+
+	if (!i)
+		return 0; /* timed out */
+
+	atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 1);
+	if (atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) {
+		atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+		if (!j--)
+			return 0; /* timed out */
+		goto retry;
+	}
+
+	return 1;
+}
+
+static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data)
+{
+	atmel_writeAR(priv->dev, pos);
+	atmel_write16(priv->dev, DR, data); /* card is little-endian */
+	atmel_write16(priv->dev, DR, data >> 16);
+}
+
+/***************************************************************************/
+/* There follows the source form of the MAC address reading firmware       */
+/***************************************************************************/
+#if 0
+
+/* Copyright 2003 Matthew T. Russotto                                      */
+/* But derived from the Atmel 76C502 firmware written by Atmel and         */
+/* included in "atmel wireless lan drivers" package                        */
+/*
+    This file is part of net.russotto.AtmelMACFW, hereto referred to
+    as AtmelMACFW
+
+    AtmelMACFW is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License version 2
+    as published by the Free Software Foundation.
+
+    AtmelMACFW is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with AtmelMACFW; if not, see <http://www.gnu.org/licenses/>.
+
+****************************************************************************/
+/* This firmware should work on the 76C502 RFMD, RFMD_D, and RFMD_E        */
+/* It will probably work on the 76C504 and 76C502 RFMD_3COM                */
+/* It only works on SPI EEPROM versions of the card.                       */
+
+/* This firmware initializes the SPI controller and clock, reads the MAC   */
+/* address from the EEPROM into SRAM, and puts the SRAM offset of the MAC  */
+/* address in MR2, and sets MR3 to 0x10 to indicate it is done             */
+/* It also puts a complete copy of the EEPROM in SRAM with the offset in   */
+/* MR4, for investigational purposes (maybe we can determine chip type     */
+/* from that?)                                                             */
+
+	.org 0
+    .set MRBASE, 0x8000000
+	.set CPSR_INITIAL, 0xD3 /* IRQ/FIQ disabled, ARM mode, Supervisor state */
+	.set CPSR_USER, 0xD1 /* IRQ/FIQ disabled, ARM mode, USER state */
+	.set SRAM_BASE,  0x02000000
+	.set SP_BASE,    0x0F300000
+	.set UNK_BASE,   0x0F000000 /* Some internal device, but which one? */
+	.set SPI_CGEN_BASE,  0x0E000000 /* Some internal device, but which one? */
+	.set UNK3_BASE,  0x02014000 /* Some internal device, but which one? */
+	.set STACK_BASE, 0x5600
+	.set SP_SR, 0x10
+	.set SP_TDRE, 2 /* status register bit -- TDR empty */
+	.set SP_RDRF, 1 /* status register bit -- RDR full */
+	.set SP_SWRST, 0x80
+	.set SP_SPIEN, 0x1
+	.set SP_CR, 0   /* control register */
+	.set SP_MR, 4   /* mode register */
+	.set SP_RDR, 0x08 /* Read Data Register */
+	.set SP_TDR, 0x0C /* Transmit Data Register */
+	.set SP_CSR0, 0x30 /* chip select registers */
+	.set SP_CSR1, 0x34
+	.set SP_CSR2, 0x38
+	.set SP_CSR3, 0x3C
+	.set NVRAM_CMD_RDSR, 5 /* read status register */
+	.set NVRAM_CMD_READ, 3 /* read data */
+	.set NVRAM_SR_RDY, 1 /* RDY bit.  This bit is inverted */
+	.set SPI_8CLOCKS, 0xFF /* Writing this to the TDR doesn't do anything to the
+				  serial output, since SO is normally high.  But it
+				  does cause 8 clock cycles and thus 8 bits to be
+				  clocked in to the chip.  See Atmel's SPI
+				  controller (e.g. AT91M55800) timing and 4K
+				  SPI EEPROM manuals */
+
+	.set NVRAM_SCRATCH, 0x02000100  /* arbitrary area for scratchpad memory */
+	.set NVRAM_IMAGE, 0x02000200
+	.set NVRAM_LENGTH, 0x0200
+	.set MAC_ADDRESS_MIB, SRAM_BASE
+	.set MAC_ADDRESS_LENGTH, 6
+	.set MAC_BOOT_FLAG, 0x10
+	.set MR1, 0
+	.set MR2, 4
+	.set MR3, 8
+	.set MR4, 0xC
+RESET_VECTOR:
+	b RESET_HANDLER
+UNDEF_VECTOR:
+	b HALT1
+SWI_VECTOR:
+	b HALT1
+IABORT_VECTOR:
+	b HALT1
+DABORT_VECTOR:
+RESERVED_VECTOR:
+	b HALT1
+IRQ_VECTOR:
+	b HALT1
+FIQ_VECTOR:
+	b HALT1
+HALT1:	b HALT1
+RESET_HANDLER:
+	mov     r0, #CPSR_INITIAL
+	msr	CPSR_c, r0	/* This is probably unnecessary */
+
+/* I'm guessing this is initializing clock generator electronics for SPI */
+	ldr	r0, =SPI_CGEN_BASE
+	mov	r1, #0
+	mov	r1, r1, lsl #3
+	orr	r1, r1, #0
+	str	r1, [r0]
+	ldr	r1, [r0, #28]
+	bic	r1, r1, #16
+	str	r1, [r0, #28]
+	mov	r1, #1
+	str	r1, [r0, #8]
+
+	ldr	r0, =MRBASE
+	mov	r1, #0
+	strh	r1, [r0, #MR1]
+	strh	r1, [r0, #MR2]
+	strh	r1, [r0, #MR3]
+	strh	r1, [r0, #MR4]
+
+	mov	sp, #STACK_BASE
+	bl	SP_INIT
+	mov	r0, #10
+	bl	DELAY9
+	bl	GET_MAC_ADDR
+	bl	GET_WHOLE_NVRAM
+	ldr	r0, =MRBASE
+	ldr	r1, =MAC_ADDRESS_MIB
+	strh	r1, [r0, #MR2]
+	ldr	r1, =NVRAM_IMAGE
+	strh	r1, [r0, #MR4]
+	mov	r1, #MAC_BOOT_FLAG
+	strh	r1, [r0, #MR3]
+HALT2:	b HALT2
+.func Get_Whole_NVRAM, GET_WHOLE_NVRAM
+GET_WHOLE_NVRAM:
+	stmdb	sp!, {lr}
+	mov	r2, #0 /* 0th bytes of NVRAM */
+	mov	r3, #NVRAM_LENGTH
+	mov	r1, #0		/* not used in routine */
+	ldr	r0, =NVRAM_IMAGE
+	bl	NVRAM_XFER
+	ldmia	sp!, {lr}
+	bx	lr
+.endfunc
+
+.func Get_MAC_Addr, GET_MAC_ADDR
+GET_MAC_ADDR:
+	stmdb	sp!, {lr}
+	mov	r2, #0x120	/* address of MAC Address within NVRAM */
+	mov	r3, #MAC_ADDRESS_LENGTH
+	mov	r1, #0		/* not used in routine */
+	ldr	r0, =MAC_ADDRESS_MIB
+	bl	NVRAM_XFER
+	ldmia	sp!, {lr}
+	bx	lr
+.endfunc
+.ltorg
+.func Delay9, DELAY9
+DELAY9:
+	adds	r0, r0, r0, LSL #3   /* r0 = r0 * 9 */
+DELAYLOOP:
+	beq	DELAY9_done
+	subs	r0, r0, #1
+	b	DELAYLOOP
+DELAY9_done:
+	bx	lr
+.endfunc
+
+.func SP_Init, SP_INIT
+SP_INIT:
+	mov	r1, #SP_SWRST
+	ldr	r0, =SP_BASE
+	str	r1, [r0, #SP_CR] /* reset the SPI */
+	mov	r1, #0
+	str	r1, [r0, #SP_CR] /* release SPI from reset state */
+	mov	r1, #SP_SPIEN
+	str	r1, [r0, #SP_MR] /* set the SPI to MASTER mode*/
+	str	r1, [r0, #SP_CR] /* enable the SPI */
+
+/*  My guess would be this turns on the SPI clock */
+	ldr	r3, =SPI_CGEN_BASE
+	ldr	r1, [r3, #28]
+	orr	r1, r1, #0x2000
+	str	r1, [r3, #28]
+
+	ldr	r1, =0x2000c01
+	str	r1, [r0, #SP_CSR0]
+	ldr	r1, =0x2000201
+	str	r1, [r0, #SP_CSR1]
+	str	r1, [r0, #SP_CSR2]
+	str	r1, [r0, #SP_CSR3]
+	ldr	r1, [r0, #SP_SR]
+	ldr	r0, [r0, #SP_RDR]
+	bx	lr
+.endfunc
+.func NVRAM_Init, NVRAM_INIT
+NVRAM_INIT:
+	ldr	r1, =SP_BASE
+	ldr	r0, [r1, #SP_RDR]
+	mov	r0, #NVRAM_CMD_RDSR
+	str	r0, [r1, #SP_TDR]
+SP_loop1:
+	ldr	r0, [r1, #SP_SR]
+	tst	r0, #SP_TDRE
+	beq	SP_loop1
+
+	mov	r0, #SPI_8CLOCKS
+	str	r0, [r1, #SP_TDR]
+SP_loop2:
+	ldr	r0, [r1, #SP_SR]
+	tst	r0, #SP_TDRE
+	beq	SP_loop2
+
+	ldr	r0, [r1, #SP_RDR]
+SP_loop3:
+	ldr	r0, [r1, #SP_SR]
+	tst	r0, #SP_RDRF
+	beq	SP_loop3
+
+	ldr	r0, [r1, #SP_RDR]
+	and	r0, r0, #255
+	bx	lr
+.endfunc
+
+.func NVRAM_Xfer, NVRAM_XFER
+	/* r0 = dest address */
+	/* r1 = not used */
+	/* r2 = src address within NVRAM */
+	/* r3 = length */
+NVRAM_XFER:
+	stmdb	sp!, {r4, r5, lr}
+	mov	r5, r0		/* save r0 (dest address) */
+	mov	r4, r3		/* save r3 (length) */
+	mov	r0, r2, LSR #5 /*  SPI memories put A8 in the command field */
+	and	r0, r0, #8
+	add	r0, r0, #NVRAM_CMD_READ
+	ldr	r1, =NVRAM_SCRATCH
+	strb	r0, [r1, #0]	/* save command in NVRAM_SCRATCH[0] */
+	strb	r2, [r1, #1]    /* save low byte of source address in NVRAM_SCRATCH[1] */
+_local1:
+	bl	NVRAM_INIT
+	tst	r0, #NVRAM_SR_RDY
+	bne	_local1
+	mov	r0, #20
+	bl	DELAY9
+	mov	r2, r4		/* length */
+	mov	r1, r5		/* dest address */
+	mov	r0, #2		/* bytes to transfer in command */
+	bl	NVRAM_XFER2
+	ldmia	sp!, {r4, r5, lr}
+	bx	lr
+.endfunc
+
+.func NVRAM_Xfer2, NVRAM_XFER2
+NVRAM_XFER2:
+	stmdb	sp!, {r4, r5, r6, lr}
+	ldr	r4, =SP_BASE
+	mov	r3, #0
+	cmp	r0, #0
+	bls	_local2
+	ldr	r5, =NVRAM_SCRATCH
+_local4:
+	ldrb	r6, [r5, r3]
+	str	r6, [r4, #SP_TDR]
+_local3:
+	ldr	r6, [r4, #SP_SR]
+	tst	r6, #SP_TDRE
+	beq	_local3
+	add	r3, r3, #1
+	cmp	r3, r0 /* r0 is # of bytes to send out (command+addr) */
+	blo	_local4
+_local2:
+	mov	r3, #SPI_8CLOCKS
+	str	r3, [r4, #SP_TDR]
+	ldr	r0, [r4, #SP_RDR]
+_local5:
+	ldr	r0, [r4, #SP_SR]
+	tst	r0, #SP_RDRF
+	beq	_local5
+	ldr	r0, [r4, #SP_RDR] /* what's this byte?  It's the byte read while writing the TDR -- nonsense, because the NVRAM doesn't read and write at the same time */
+	mov	r0, #0
+	cmp	r2, #0  /* r2 is # of bytes to copy in */
+	bls	_local6
+_local7:
+	ldr	r5, [r4, #SP_SR]
+	tst	r5, #SP_TDRE
+	beq	_local7
+	str	r3, [r4, #SP_TDR]  /* r3 has SPI_8CLOCKS */
+_local8:
+	ldr	r5, [r4, #SP_SR]
+	tst	r5, #SP_RDRF
+	beq	_local8
+	ldr	r5, [r4, #SP_RDR] /* but didn't we read this byte above? */
+	strb	r5, [r1], #1 /* postindexed */
+	add	r0, r0, #1
+	cmp	r0, r2
+	blo	_local7 /* since we don't send another address, the NVRAM must be capable of sequential reads */
+_local6:
+	mov	r0, #200
+	bl	DELAY9
+	ldmia	sp!, {r4, r5, r6, lr}
+	bx	lr
+#endif
diff --git a/drivers/net/wireless/atmel/atmel.h b/drivers/net/wireless/atmel/atmel.h
new file mode 100644
index 0000000000..d2aa52cf6e
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*** -*- linux-c -*- **********************************************************
+
+     Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+         Copyright 2005 Dan Williams and Red Hat, Inc.
+
+
+******************************************************************************/
+
+#ifndef _ATMEL_H
+#define _ATMEL_H
+
+typedef enum {
+	ATMEL_FW_TYPE_NONE = 0,
+	ATMEL_FW_TYPE_502,
+	ATMEL_FW_TYPE_502D,
+	ATMEL_FW_TYPE_502E,
+	ATMEL_FW_TYPE_502_3COM,
+	ATMEL_FW_TYPE_504,
+	ATMEL_FW_TYPE_504_2958,
+	ATMEL_FW_TYPE_504A_2958,
+	ATMEL_FW_TYPE_506
+} AtmelFWType;
+
+struct net_device *init_atmel_card(unsigned short, unsigned long, const AtmelFWType, struct device *, 
+				    int (*present_func)(void *), void * );
+void stop_atmel_card( struct net_device *);
+int atmel_open( struct net_device * );
+
+#endif
diff --git a/drivers/net/wireless/atmel/atmel_cs.c b/drivers/net/wireless/atmel/atmel_cs.c
new file mode 100644
index 0000000000..58bba9875d
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel_cs.c
@@ -0,0 +1,292 @@
+/*** -*- linux-c -*- **********************************************************
+
+     Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+        Copyright 2000-2001 ATMEL Corporation.
+        Copyright 2003 Simon Kelley.
+
+    This code was developed from version 2.1.1 of the Atmel drivers,
+    released by Atmel corp. under the GPL in December 2002. It also
+    includes code from the Linux aironet drivers (C) Benjamin Reed,
+    and the Linux PCMCIA package, (C) David Hinds.
+
+    For all queries about this code, please contact the current author,
+    Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This software is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with Atmel wireless lan drivers; if not, see
+    <http://www.gnu.org/licenses/>.
+
+******************************************************************************/
+
+#ifdef __IN_PCMCIA_PACKAGE__
+#include <pcmcia/k_compat.h>
+#endif
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/ciscode.h>
+
+#include <asm/io.h>
+#include <linux/wireless.h>
+
+#include "atmel.h"
+
+
+/*====================================================================*/
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+
+/*====================================================================*/
+
+static int atmel_config(struct pcmcia_device *link);
+static void atmel_release(struct pcmcia_device *link);
+
+static void atmel_detach(struct pcmcia_device *p_dev);
+
+struct local_info {
+	struct net_device *eth_dev;
+};
+
+static int atmel_probe(struct pcmcia_device *p_dev)
+{
+	struct local_info *local;
+	int ret;
+
+	dev_dbg(&p_dev->dev, "atmel_attach()\n");
+
+	/* Allocate space for private device-specific data */
+	local = kzalloc(sizeof(*local), GFP_KERNEL);
+	if (!local)
+		return -ENOMEM;
+
+	p_dev->priv = local;
+
+	ret = atmel_config(p_dev);
+	if (ret)
+		goto err_free_priv;
+
+	return 0;
+
+err_free_priv:
+	kfree(p_dev->priv);
+	return ret;
+}
+
+static void atmel_detach(struct pcmcia_device *link)
+{
+	dev_dbg(&link->dev, "atmel_detach\n");
+
+	atmel_release(link);
+
+	kfree(link->priv);
+}
+
+/* Call-back function to interrogate PCMCIA-specific information
+   about the current existence of the card */
+static int card_present(void *arg)
+{
+	struct pcmcia_device *link = (struct pcmcia_device *)arg;
+
+	if (pcmcia_dev_present(link))
+		return 1;
+
+	return 0;
+}
+
+static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+	if (p_dev->config_index == 0)
+		return -EINVAL;
+
+	return pcmcia_request_io(p_dev);
+}
+
+static int atmel_config(struct pcmcia_device *link)
+{
+	int ret;
+	const struct pcmcia_device_id *did;
+
+	did = dev_get_drvdata(&link->dev);
+
+	dev_dbg(&link->dev, "atmel_config\n");
+
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
+	if (pcmcia_loop_config(link, atmel_config_check, NULL))
+		goto failed;
+
+	if (!link->irq) {
+		dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
+		goto failed;
+	}
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	((struct local_info *)link->priv)->eth_dev =
+		init_atmel_card(link->irq,
+				link->resource[0]->start,
+				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
+				&link->dev,
+				card_present,
+				link);
+	if (!((struct local_info *)link->priv)->eth_dev)
+			goto failed;
+
+
+	return 0;
+
+ failed:
+	atmel_release(link);
+	return -ENODEV;
+}
+
+static void atmel_release(struct pcmcia_device *link)
+{
+	struct net_device *dev = ((struct local_info *)link->priv)->eth_dev;
+
+	dev_dbg(&link->dev, "atmel_release\n");
+
+	if (dev)
+		stop_atmel_card(dev);
+	((struct local_info *)link->priv)->eth_dev = NULL;
+
+	pcmcia_disable_device(link);
+}
+
+static int atmel_suspend(struct pcmcia_device *link)
+{
+	struct local_info *local = link->priv;
+
+	netif_device_detach(local->eth_dev);
+
+	return 0;
+}
+
+static int atmel_resume(struct pcmcia_device *link)
+{
+	struct local_info *local = link->priv;
+
+	atmel_open(local->eth_dev);
+	netif_device_attach(local->eth_dev);
+
+	return 0;
+}
+
+/*====================================================================*/
+/* We use the driver_info field to store the correct firmware type for a card. */
+
+#define PCMCIA_DEVICE_MANF_CARD_INFO(manf, card, info) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+        .driver_info = (kernel_ulong_t)(info), }
+
+#define PCMCIA_DEVICE_PROD_ID12_INFO(v1, v2, vh1, vh2, info) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+        .driver_info = (kernel_ulong_t)(info), }
+
+static const struct pcmcia_device_id atmel_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0620, ATMEL_FW_TYPE_502_3COM),
+	PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0696, ATMEL_FW_TYPE_502_3COM),
+	PCMCIA_DEVICE_MANF_CARD_INFO(0x01bf, 0x3302, ATMEL_FW_TYPE_502E),
+	PCMCIA_DEVICE_MANF_CARD_INFO(0xd601, 0x0007, ATMEL_FW_TYPE_502),
+	PCMCIA_DEVICE_PROD_ID12_INFO("11WAVE", "11WP611AL-E", 0x9eb2da1f, 0xc9a0d3f9, ATMEL_FW_TYPE_502E),
+	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR", 0xabda4164, 0x41b37e1f, ATMEL_FW_TYPE_502),
+	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_D", 0xabda4164, 0x3675d704, ATMEL_FW_TYPE_502D),
+	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_E", 0xabda4164, 0x4172e792, ATMEL_FW_TYPE_502E),
+	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504_R", 0xabda4164, 0x917f3d72, ATMEL_FW_TYPE_504_2958),
+	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504", 0xabda4164, 0x5040670a, ATMEL_FW_TYPE_504),
+	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504A", 0xabda4164, 0xe15ed87f, ATMEL_FW_TYPE_504A_2958),
+	PCMCIA_DEVICE_PROD_ID12_INFO("BT", "Voyager 1020 Laptop Adapter", 0xae49b86a, 0x1e957cd5, ATMEL_FW_TYPE_502),
+	PCMCIA_DEVICE_PROD_ID12_INFO("CNet", "CNWLC 11Mbps Wireless PC Card V-5", 0xbc477dde, 0x502fae6b, ATMEL_FW_TYPE_502E),
+	PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN PC Card", 0x5b878724, 0x122f1df6, ATMEL_FW_TYPE_502),
+	PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN Card S", 0x5b878724, 0x5fba533a, ATMEL_FW_TYPE_504_2958),
+	PCMCIA_DEVICE_PROD_ID12_INFO("OEM", "11Mbps Wireless LAN PC Card V-3", 0xfea54c90, 0x1c5b0f68, ATMEL_FW_TYPE_502),
+	PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W", 0xc4f8b18b, 0x30f38774, ATMEL_FW_TYPE_502D),
+	PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W-V2", 0xc4f8b18b, 0x172d1377, ATMEL_FW_TYPE_502),
+	PCMCIA_DEVICE_PROD_ID12_INFO("Wireless", "PC_CARD", 0xa407ecdd, 0x119f6314, ATMEL_FW_TYPE_502D),
+	PCMCIA_DEVICE_PROD_ID12_INFO("WLAN", "802.11b PC CARD", 0x575c516c, 0xb1f6dbc4, ATMEL_FW_TYPE_502D),
+	PCMCIA_DEVICE_PROD_ID12_INFO("LG", "LW2100N", 0xb474d43a, 0x6b1fec94, ATMEL_FW_TYPE_502E),
+	PCMCIA_DEVICE_NULL
+};
+
+MODULE_DEVICE_TABLE(pcmcia, atmel_ids);
+
+static struct pcmcia_driver atmel_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "atmel_cs",
+	.probe          = atmel_probe,
+	.remove		= atmel_detach,
+	.id_table	= atmel_ids,
+	.suspend	= atmel_suspend,
+	.resume		= atmel_resume,
+};
+module_pcmcia_driver(atmel_driver);
+
+/*
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License
+    as published by the Free Software Foundation; either version 2
+    of the License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    In addition:
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+    3. The name of the author may not be used to endorse or promote
+       products derived from this software without specific prior written
+       permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+    IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+    ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+    INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+    IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+*/
diff --git a/drivers/net/wireless/atmel/atmel_pci.c b/drivers/net/wireless/atmel/atmel_pci.c
new file mode 100644
index 0000000000..f428dc79d9
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel_pci.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*** -*- linux-c -*- **********************************************************
+
+     Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+         Copyright 2004 Simon Kelley.
+
+
+******************************************************************************/
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include "atmel.h"
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+
+static const struct pci_device_id card_ids[] = {
+	{ 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, card_ids);
+
+static int atmel_pci_probe(struct pci_dev *, const struct pci_device_id *);
+static void atmel_pci_remove(struct pci_dev *);
+
+static struct pci_driver atmel_driver = {
+	.name     = "atmel",
+	.id_table = card_ids,
+	.probe    = atmel_pci_probe,
+	.remove   = atmel_pci_remove,
+};
+
+
+static int atmel_pci_probe(struct pci_dev *pdev,
+				     const struct pci_device_id *pent)
+{
+	struct net_device *dev;
+
+	if (pci_enable_device(pdev))
+		return -ENODEV;
+
+	pci_set_master(pdev);
+
+	dev = init_atmel_card(pdev->irq, pdev->resource[1].start,
+			      ATMEL_FW_TYPE_506,
+			      &pdev->dev, NULL, NULL);
+	if (!dev) {
+		pci_disable_device(pdev);
+		return -ENODEV;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	return 0;
+}
+
+static void atmel_pci_remove(struct pci_dev *pdev)
+{
+	stop_atmel_card(pci_get_drvdata(pdev));
+}
+
+module_pci_driver(atmel_driver);