diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/wireless/ralink/rt2x00/rt2800lib.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/wireless/ralink/rt2x00/rt2800lib.c')
-rw-r--r-- | drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 12188 |
1 files changed, 12188 insertions, 0 deletions
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c new file mode 100644 index 0000000000..e65cc00fa1 --- /dev/null +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -0,0 +1,12188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> + Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com> + + Based on the original rt2800pci.c and rt2800usb.c. + Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + <http://rt2x00.serialmonkey.com> + + */ + +/* + Module: rt2800lib + Abstract: rt2800 generic device routines. + */ + +#include <linux/crc-ccitt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include "rt2x00.h" +#include "rt2800lib.h" +#include "rt2800.h" + +static bool modparam_watchdog; +module_param_named(watchdog, modparam_watchdog, bool, S_IRUGO); +MODULE_PARM_DESC(watchdog, "Enable watchdog to detect tx/rx hangs and reset hardware if detected"); + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2800_register_read and rt2800_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + * The _lock versions must be used if you already hold the csr_mutex + */ +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RFCSR(__dev, __reg) \ + rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RFCSR_MT7620(__dev, __reg) \ + rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY_MT7620, \ + (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ + rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \ + H2M_MAILBOX_CSR_OWNER, (__reg)) + +static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev) +{ + /* check for rt2872 on SoC */ + if (!rt2x00_is_soc(rt2x00dev) || + !rt2x00_rt(rt2x00dev, RT2872)) + return false; + + /* we know for sure that these rf chipsets are used on rt305x boards */ + if (rt2x00_rf(rt2x00dev, RF3020) || + rt2x00_rf(rt2x00dev, RF3021) || + rt2x00_rf(rt2x00dev, RF3022)) + return true; + + rt2x00_warn(rt2x00dev, "Unknown RF chipset on rt305x\n"); + return false; +} + +static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); + rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); + + rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static u8 rt2800_bbp_read(struct rt2x00_dev *rt2x00dev, const unsigned int word) +{ + u32 reg; + u8 value; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); + + rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + + WAIT_FOR_BBP(rt2x00dev, ®); + } + + value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); + + return value; +} + +static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the new data into the register. + */ + switch (rt2x00dev->chip.rt) { + case RT6352: + if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_DATA_MT7620, value); + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620, + word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 1); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + } + break; + + default: + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + } + break; + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_rfcsr_write_bank(struct rt2x00_dev *rt2x00dev, const u8 bank, + const unsigned int reg, const u8 value) +{ + rt2800_rfcsr_write(rt2x00dev, (reg | (bank << 6)), value); +} + +static void rt2800_rfcsr_write_chanreg(struct rt2x00_dev *rt2x00dev, + const unsigned int reg, const u8 value) +{ + rt2800_rfcsr_write_bank(rt2x00dev, 4, reg, value); + rt2800_rfcsr_write_bank(rt2x00dev, 6, reg, value); +} + +static void rt2800_rfcsr_write_dccal(struct rt2x00_dev *rt2x00dev, + const unsigned int reg, const u8 value) +{ + rt2800_rfcsr_write_bank(rt2x00dev, 5, reg, value); + rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value); +} + +static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev, + const u8 reg, const u8 value) +{ + rt2800_bbp_write(rt2x00dev, 158, reg); + rt2800_bbp_write(rt2x00dev, 159, value); +} + +static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg) +{ + rt2800_bbp_write(rt2x00dev, 158, reg); + return rt2800_bbp_read(rt2x00dev, 159); +} + +static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev, + const u8 reg, const u8 value) +{ + rt2800_bbp_write(rt2x00dev, 195, reg); + rt2800_bbp_write(rt2x00dev, 196, value); +} + +static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word) +{ + u32 reg; + u8 value; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + switch (rt2x00dev->chip.rt) { + case RT6352: + if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620, + word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 0); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + + WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®); + } + + value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620); + break; + + default: + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + + WAIT_FOR_RFCSR(rt2x00dev, ®); + } + + value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); + break; + } + + mutex_unlock(&rt2x00dev->csr_mutex); + + return value; +} + +static u8 rt2800_rfcsr_read_bank(struct rt2x00_dev *rt2x00dev, const u8 bank, + const unsigned int reg) +{ + return rt2800_rfcsr_read(rt2x00dev, (reg | (bank << 6))); +} + +static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); + rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = { + [EEPROM_CHIP_ID] = 0x0000, + [EEPROM_VERSION] = 0x0001, + [EEPROM_MAC_ADDR_0] = 0x0002, + [EEPROM_MAC_ADDR_1] = 0x0003, + [EEPROM_MAC_ADDR_2] = 0x0004, + [EEPROM_NIC_CONF0] = 0x001a, + [EEPROM_NIC_CONF1] = 0x001b, + [EEPROM_FREQ] = 0x001d, + [EEPROM_LED_AG_CONF] = 0x001e, + [EEPROM_LED_ACT_CONF] = 0x001f, + [EEPROM_LED_POLARITY] = 0x0020, + [EEPROM_NIC_CONF2] = 0x0021, + [EEPROM_LNA] = 0x0022, + [EEPROM_RSSI_BG] = 0x0023, + [EEPROM_RSSI_BG2] = 0x0024, + [EEPROM_TXMIXER_GAIN_BG] = 0x0024, /* overlaps with RSSI_BG2 */ + [EEPROM_RSSI_A] = 0x0025, + [EEPROM_RSSI_A2] = 0x0026, + [EEPROM_TXMIXER_GAIN_A] = 0x0026, /* overlaps with RSSI_A2 */ + [EEPROM_EIRP_MAX_TX_POWER] = 0x0027, + [EEPROM_TXPOWER_DELTA] = 0x0028, + [EEPROM_TXPOWER_BG1] = 0x0029, + [EEPROM_TXPOWER_BG2] = 0x0030, + [EEPROM_TSSI_BOUND_BG1] = 0x0037, + [EEPROM_TSSI_BOUND_BG2] = 0x0038, + [EEPROM_TSSI_BOUND_BG3] = 0x0039, + [EEPROM_TSSI_BOUND_BG4] = 0x003a, + [EEPROM_TSSI_BOUND_BG5] = 0x003b, + [EEPROM_TXPOWER_A1] = 0x003c, + [EEPROM_TXPOWER_A2] = 0x0053, + [EEPROM_TXPOWER_INIT] = 0x0068, + [EEPROM_TSSI_BOUND_A1] = 0x006a, + [EEPROM_TSSI_BOUND_A2] = 0x006b, + [EEPROM_TSSI_BOUND_A3] = 0x006c, + [EEPROM_TSSI_BOUND_A4] = 0x006d, + [EEPROM_TSSI_BOUND_A5] = 0x006e, + [EEPROM_TXPOWER_BYRATE] = 0x006f, + [EEPROM_BBP_START] = 0x0078, +}; + +static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = { + [EEPROM_CHIP_ID] = 0x0000, + [EEPROM_VERSION] = 0x0001, + [EEPROM_MAC_ADDR_0] = 0x0002, + [EEPROM_MAC_ADDR_1] = 0x0003, + [EEPROM_MAC_ADDR_2] = 0x0004, + [EEPROM_NIC_CONF0] = 0x001a, + [EEPROM_NIC_CONF1] = 0x001b, + [EEPROM_NIC_CONF2] = 0x001c, + [EEPROM_EIRP_MAX_TX_POWER] = 0x0020, + [EEPROM_FREQ] = 0x0022, + [EEPROM_LED_AG_CONF] = 0x0023, + [EEPROM_LED_ACT_CONF] = 0x0024, + [EEPROM_LED_POLARITY] = 0x0025, + [EEPROM_LNA] = 0x0026, + [EEPROM_EXT_LNA2] = 0x0027, + [EEPROM_RSSI_BG] = 0x0028, + [EEPROM_RSSI_BG2] = 0x0029, + [EEPROM_RSSI_A] = 0x002a, + [EEPROM_RSSI_A2] = 0x002b, + [EEPROM_TXPOWER_BG1] = 0x0030, + [EEPROM_TXPOWER_BG2] = 0x0037, + [EEPROM_EXT_TXPOWER_BG3] = 0x003e, + [EEPROM_TSSI_BOUND_BG1] = 0x0045, + [EEPROM_TSSI_BOUND_BG2] = 0x0046, + [EEPROM_TSSI_BOUND_BG3] = 0x0047, + [EEPROM_TSSI_BOUND_BG4] = 0x0048, + [EEPROM_TSSI_BOUND_BG5] = 0x0049, + [EEPROM_TXPOWER_A1] = 0x004b, + [EEPROM_TXPOWER_A2] = 0x0065, + [EEPROM_EXT_TXPOWER_A3] = 0x007f, + [EEPROM_TSSI_BOUND_A1] = 0x009a, + [EEPROM_TSSI_BOUND_A2] = 0x009b, + [EEPROM_TSSI_BOUND_A3] = 0x009c, + [EEPROM_TSSI_BOUND_A4] = 0x009d, + [EEPROM_TSSI_BOUND_A5] = 0x009e, + [EEPROM_TXPOWER_BYRATE] = 0x00a0, +}; + +static unsigned int rt2800_eeprom_word_index(struct rt2x00_dev *rt2x00dev, + const enum rt2800_eeprom_word word) +{ + const unsigned int *map; + unsigned int index; + + if (WARN_ONCE(word >= EEPROM_WORD_COUNT, + "%s: invalid EEPROM word %d\n", + wiphy_name(rt2x00dev->hw->wiphy), word)) + return 0; + + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + map = rt2800_eeprom_map_ext; + else + map = rt2800_eeprom_map; + + index = map[word]; + + /* Index 0 is valid only for EEPROM_CHIP_ID. + * Otherwise it means that the offset of the + * given word is not initialized in the map, + * or that the field is not usable on the + * actual chipset. + */ + WARN_ONCE(word != EEPROM_CHIP_ID && index == 0, + "%s: invalid access of EEPROM word %d\n", + wiphy_name(rt2x00dev->hw->wiphy), word); + + return index; +} + +static void *rt2800_eeprom_addr(struct rt2x00_dev *rt2x00dev, + const enum rt2800_eeprom_word word) +{ + unsigned int index; + + index = rt2800_eeprom_word_index(rt2x00dev, word); + return rt2x00_eeprom_addr(rt2x00dev, index); +} + +static u16 rt2800_eeprom_read(struct rt2x00_dev *rt2x00dev, + const enum rt2800_eeprom_word word) +{ + unsigned int index; + + index = rt2800_eeprom_word_index(rt2x00dev, word); + return rt2x00_eeprom_read(rt2x00dev, index); +} + +static void rt2800_eeprom_write(struct rt2x00_dev *rt2x00dev, + const enum rt2800_eeprom_word word, u16 data) +{ + unsigned int index; + + index = rt2800_eeprom_word_index(rt2x00dev, word); + rt2x00_eeprom_write(rt2x00dev, index, data); +} + +static u16 rt2800_eeprom_read_from_array(struct rt2x00_dev *rt2x00dev, + const enum rt2800_eeprom_word array, + unsigned int offset) +{ + unsigned int index; + + index = rt2800_eeprom_word_index(rt2x00dev, array); + return rt2x00_eeprom_read(rt2x00dev, index + offset); +} + +static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + int i, count; + + reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL); + rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); + rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); + rt2x00_set_field32(®, WLAN_CLK_EN, 0); + rt2x00_set_field32(®, WLAN_EN, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + + udelay(REGISTER_BUSY_DELAY); + + count = 0; + do { + /* + * Check PLL_LD & XTAL_RDY. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + reg = rt2800_register_read(rt2x00dev, CMB_CTRL); + if (rt2x00_get_field32(reg, PLL_LD) && + rt2x00_get_field32(reg, XTAL_RDY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + if (i >= REGISTER_BUSY_COUNT) { + + if (count >= 10) + return -EIO; + + rt2800_register_write(rt2x00dev, 0x58, 0x018); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x418); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x618); + udelay(REGISTER_BUSY_DELAY); + count++; + } else { + count = 0; + } + + reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL); + rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); + rt2x00_set_field32(®, WLAN_CLK_EN, 1); + rt2x00_set_field32(®, WLAN_RESET, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2x00_set_field32(®, WLAN_RESET, 0); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); + } while (count != 0); + + return 0; +} + +void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, + const u8 command, const u8 token, + const u8 arg0, const u8 arg1) +{ + u32 reg; + + /* + * SOC devices don't support MCU requests. + */ + if (rt2x00_is_soc(rt2x00dev)) + return; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the MCU becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_MCU(rt2x00dev, ®)) { + rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); + rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); + + reg = 0; + rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); + rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} +EXPORT_SYMBOL_GPL(rt2800_mcu_request); + +int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i = 0; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + reg = rt2800_register_read(rt2x00dev, MAC_CSR0); + if (reg && reg != ~0) + return 0; + msleep(1); + } + + rt2x00_err(rt2x00dev, "Unstable hardware\n"); + return -EBUSY; +} +EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready); + +int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u32 reg; + + /* + * Some devices are really slow to respond here. Wait a whole second + * before timing out. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG); + if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && + !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) + return 0; + + msleep(10); + } + + rt2x00_err(rt2x00dev, "WPDMA TX/RX busy [0x%08x]\n", reg); + return -EACCES; +} +EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready); + +void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_disable_wpdma); + +void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev, + unsigned short *txwi_size, + unsigned short *rxwi_size) +{ + switch (rt2x00dev->chip.rt) { + case RT3593: + case RT3883: + *txwi_size = TXWI_DESC_SIZE_4WORDS; + *rxwi_size = RXWI_DESC_SIZE_5WORDS; + break; + + case RT5592: + case RT6352: + *txwi_size = TXWI_DESC_SIZE_5WORDS; + *rxwi_size = RXWI_DESC_SIZE_6WORDS; + break; + + default: + *txwi_size = TXWI_DESC_SIZE_4WORDS; + *rxwi_size = RXWI_DESC_SIZE_4WORDS; + break; + } +} +EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size); + +static bool rt2800_check_firmware_crc(const u8 *data, const size_t len) +{ + u16 fw_crc; + u16 crc; + + /* + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + fw_crc = (data[len - 2] << 8 | data[len - 1]); + + /* + * Use the crc ccitt algorithm. + * This will return the same value as the legacy driver which + * used bit ordering reversion on the both the firmware bytes + * before input input as well as on the final output. + * Obviously using crc ccitt directly is much more efficient. + */ + crc = crc_ccitt(~0, data, len - 2); + + /* + * There is a small difference between the crc-itu-t + bitrev and + * the crc-ccitt crc calculation. In the latter method the 2 bytes + * will be swapped, use swab16 to convert the crc to the correct + * value. + */ + crc = swab16(crc); + + return fw_crc == crc; +} + +int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + size_t offset = 0; + size_t fw_len; + bool multiple; + + /* + * PCI(e) & SOC devices require firmware with a length + * of 8kb. USB devices require firmware files with a length + * of 4kb. Certain USB chipsets however require different firmware, + * which Ralink only provides attached to the original firmware + * file. Thus for USB devices, firmware files have a length + * which is a multiple of 4kb. The firmware for rt3290 chip also + * have a length which is a multiple of 4kb. + */ + if (rt2x00_is_usb(rt2x00dev) || rt2x00_rt(rt2x00dev, RT3290)) + fw_len = 4096; + else + fw_len = 8192; + + multiple = true; + /* + * Validate the firmware length + */ + if (len != fw_len && (!multiple || (len % fw_len) != 0)) + return FW_BAD_LENGTH; + + /* + * Check if the chipset requires one of the upper parts + * of the firmware. + */ + if (rt2x00_is_usb(rt2x00dev) && + !rt2x00_rt(rt2x00dev, RT2860) && + !rt2x00_rt(rt2x00dev, RT2872) && + !rt2x00_rt(rt2x00dev, RT3070) && + ((len / fw_len) == 1)) + return FW_BAD_VERSION; + + /* + * 8kb firmware files must be checked as if it were + * 2 separate firmware files. + */ + while (offset < len) { + if (!rt2800_check_firmware_crc(data + offset, fw_len)) + return FW_BAD_CRC; + + offset += fw_len; + } + + return FW_OK; +} +EXPORT_SYMBOL_GPL(rt2800_check_firmware); + +int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + unsigned int i; + u32 reg; + int retval; + + if (rt2x00_rt(rt2x00dev, RT3290)) { + retval = rt2800_enable_wlan_rt3290(rt2x00dev); + if (retval) + return -EBUSY; + } + + /* + * If driver doesn't wake up firmware here, + * rt2800_load_firmware will hang forever when interface is up again. + */ + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); + + /* + * Wait for stable hardware. + */ + if (rt2800_wait_csr_ready(rt2x00dev)) + return -EBUSY; + + if (rt2x00_is_pci(rt2x00dev)) { + if (rt2x00_rt(rt2x00dev, RT3290) || + rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT5390) || + rt2x00_rt(rt2x00dev, RT5392)) { + reg = rt2800_register_read(rt2x00dev, AUX_CTRL); + rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1); + rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1); + rt2800_register_write(rt2x00dev, AUX_CTRL, reg); + } + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); + } + + rt2800_disable_wpdma(rt2x00dev); + + /* + * Write firmware to the device. + */ + rt2800_drv_write_firmware(rt2x00dev, data, len); + + /* + * Wait for device to stabilize. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + reg = rt2800_register_read(rt2x00dev, PBF_SYS_CTRL); + if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + rt2x00_err(rt2x00dev, "PBF system register not ready\n"); + return -EBUSY; + } + + /* + * Disable DMA, will be reenabled later when enabling + * the radio. + */ + rt2800_disable_wpdma(rt2x00dev); + + /* + * Initialize firmware. + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + if (rt2x00_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + } + msleep(1); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_load_firmware); + +void rt2800_write_tx_data(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + __le32 *txwi = rt2800_drv_get_txwi(entry); + u32 word; + int i; + + /* + * Initialize TX Info descriptor + */ + word = rt2x00_desc_read(txwi, 0); + rt2x00_set_field32(&word, TXWI_W0_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, + test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); + rt2x00_set_field32(&word, TXWI_W0_TS, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_AMPDU, + test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, + txdesc->u.ht.mpdu_density); + rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->u.ht.txop); + rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->u.ht.mcs); + rt2x00_set_field32(&word, TXWI_W0_BW, + test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, + test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->u.ht.stbc); + rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); + rt2x00_desc_write(txwi, 0, word); + + word = rt2x00_desc_read(txwi, 1); + rt2x00_set_field32(&word, TXWI_W1_ACK, + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_NSEQ, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->u.ht.ba_size); + rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, + test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? + txdesc->key_idx : txdesc->u.ht.wcid); + rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, + txdesc->length); + rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid); + rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1); + rt2x00_desc_write(txwi, 1, word); + + /* + * Always write 0 to IV/EIV fields (word 2 and 3), hardware will insert + * the IV from the IVEIV register when TXD_W3_WIV is set to 0. + * When TXD_W3_WIV is set to 1 it will use the IV data + * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which + * crypto entry in the registers should be used to encrypt the frame. + * + * Nulify all remaining words as well, we don't know how to program them. + */ + for (i = 2; i < entry->queue->winfo_size / sizeof(__le32); i++) + _rt2x00_desc_write(txwi, i, 0); +} +EXPORT_SYMBOL_GPL(rt2800_write_tx_data); + +static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2) +{ + s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0); + s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1); + s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2); + u16 eeprom; + u8 offset0; + u8 offset1; + u8 offset2; + + if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG); + offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0); + offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2); + offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2); + } else { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A); + offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0); + offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2); + offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2); + } + + /* + * Convert the value from the descriptor into the RSSI value + * If the value in the descriptor is 0, it is considered invalid + * and the default (extremely low) rssi value is assumed + */ + rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128; + rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128; + rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128; + + /* + * mac80211 only accepts a single RSSI value. Calculating the + * average doesn't deliver a fair answer either since -60:-60 would + * be considered equally good as -50:-70 while the second is the one + * which gives less energy... + */ + rssi0 = max(rssi0, rssi1); + return (int)max(rssi0, rssi2); +} + +void rt2800_process_rxwi(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) +{ + __le32 *rxwi = (__le32 *) entry->skb->data; + u32 word; + + word = rt2x00_desc_read(rxwi, 0); + + rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF); + rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + + word = rt2x00_desc_read(rxwi, 1); + + if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI)) + rxdesc->enc_flags |= RX_ENC_FLAG_SHORT_GI; + + if (rt2x00_get_field32(word, RXWI_W1_BW)) + rxdesc->bw = RATE_INFO_BW_40; + + /* + * Detect RX rate, always use MCS as signal type. + */ + rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; + rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS); + rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE); + + /* + * Mask of 0x8 bit to remove the short preamble flag. + */ + if (rxdesc->rate_mode == RATE_MODE_CCK) + rxdesc->signal &= ~0x8; + + word = rt2x00_desc_read(rxwi, 2); + + /* + * Convert descriptor AGC value to RSSI value. + */ + rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word); + /* + * Remove RXWI descriptor from start of the buffer. + */ + skb_pull(entry->skb, entry->queue->winfo_size); +} +EXPORT_SYMBOL_GPL(rt2800_process_rxwi); + +static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc, + u32 status, enum nl80211_band band) +{ + u8 flags = 0; + u8 idx = rt2x00_get_field32(status, TX_STA_FIFO_MCS); + + switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) { + case RATE_MODE_HT_GREENFIELD: + flags |= IEEE80211_TX_RC_GREEN_FIELD; + fallthrough; + case RATE_MODE_HT_MIX: + flags |= IEEE80211_TX_RC_MCS; + break; + case RATE_MODE_OFDM: + if (band == NL80211_BAND_2GHZ) + idx += 4; + break; + case RATE_MODE_CCK: + if (idx >= 8) + idx -= 8; + break; + } + + if (rt2x00_get_field32(status, TX_STA_FIFO_BW)) + flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + + if (rt2x00_get_field32(status, TX_STA_FIFO_SGI)) + flags |= IEEE80211_TX_RC_SHORT_GI; + + skbdesc->tx_rate_idx = idx; + skbdesc->tx_rate_flags = flags; +} + +static bool rt2800_txdone_entry_check(struct queue_entry *entry, u32 reg) +{ + __le32 *txwi; + u32 word; + int wcid, ack, pid; + int tx_wcid, tx_ack, tx_pid, is_agg; + + /* + * This frames has returned with an IO error, + * so the status report is not intended for this + * frame. + */ + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + return false; + + wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); + ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); + pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); + is_agg = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE); + + /* + * Validate if this TX status report is intended for + * this entry by comparing the WCID/ACK/PID fields. + */ + txwi = rt2800_drv_get_txwi(entry); + + word = rt2x00_desc_read(txwi, 1); + tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); + tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); + tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); + + if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) { + rt2x00_dbg(entry->queue->rt2x00dev, + "TX status report missed for queue %d entry %d\n", + entry->queue->qid, entry->entry_idx); + return false; + } + + return true; +} + +void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi, + bool match) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct txdone_entry_desc txdesc; + u32 word; + u16 mcs, real_mcs; + int aggr, ampdu, wcid, ack_req; + + /* + * Obtain the status about this packet. + */ + txdesc.flags = 0; + word = rt2x00_desc_read(txwi, 0); + + mcs = rt2x00_get_field32(word, TXWI_W0_MCS); + ampdu = rt2x00_get_field32(word, TXWI_W0_AMPDU); + + real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS); + aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE); + wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID); + ack_req = rt2x00_get_field32(status, TX_STA_FIFO_TX_ACK_REQUIRED); + + /* + * If a frame was meant to be sent as a single non-aggregated MPDU + * but ended up in an aggregate the used tx rate doesn't correlate + * with the one specified in the TXWI as the whole aggregate is sent + * with the same rate. + * + * For example: two frames are sent to rt2x00, the first one sets + * AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0 + * and requests MCS15. If the hw aggregates both frames into one + * AMDPU the tx status for both frames will contain MCS7 although + * the frame was sent successfully. + * + * Hence, replace the requested rate with the real tx rate to not + * confuse the rate control algortihm by providing clearly wrong + * data. + * + * FIXME: if we do not find matching entry, we tell that frame was + * posted without any retries. We need to find a way to fix that + * and provide retry count. + */ + if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) { + rt2800_rate_from_status(skbdesc, status, rt2x00dev->curr_band); + mcs = real_mcs; + } + + if (aggr == 1 || ampdu == 1) + __set_bit(TXDONE_AMPDU, &txdesc.flags); + + if (!ack_req) + __set_bit(TXDONE_NO_ACK_REQ, &txdesc.flags); + + /* + * Ralink has a retry mechanism using a global fallback + * table. We setup this fallback table to try the immediate + * lower rate for all rates. In the TX_STA_FIFO, the MCS field + * always contains the MCS used for the last transmission, be + * it successful or not. + */ + if (rt2x00_get_field32(status, TX_STA_FIFO_TX_SUCCESS)) { + /* + * Transmission succeeded. The number of retries is + * mcs - real_mcs + */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0); + } else { + /* + * Transmission failed. The number of retries is + * always 7 in this case (for a total number of 8 + * frames sent). + */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + txdesc.retry = rt2x00dev->long_retry; + } + + /* + * the frame was retried at least once + * -> hw used fallback rates + */ + if (txdesc.retry) + __set_bit(TXDONE_FALLBACK, &txdesc.flags); + + if (!match) { + /* RCU assures non-null sta will not be freed by mac80211. */ + rcu_read_lock(); + if (likely(wcid >= WCID_START && wcid <= WCID_END)) + skbdesc->sta = drv_data->wcid_to_sta[wcid - WCID_START]; + else + skbdesc->sta = NULL; + rt2x00lib_txdone_nomatch(entry, &txdesc); + rcu_read_unlock(); + } else { + rt2x00lib_txdone(entry, &txdesc); + } +} +EXPORT_SYMBOL_GPL(rt2800_txdone_entry); + +void rt2800_txdone(struct rt2x00_dev *rt2x00dev, unsigned int quota) +{ + struct data_queue *queue; + struct queue_entry *entry; + u32 reg; + u8 qid; + bool match; + + while (quota-- > 0 && kfifo_get(&rt2x00dev->txstatus_fifo, ®)) { + /* + * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is + * guaranteed to be one of the TX QIDs . + */ + qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE); + queue = rt2x00queue_get_tx_queue(rt2x00dev, qid); + + if (unlikely(rt2x00queue_empty(queue))) { + rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n", + qid); + break; + } + + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + + if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) { + rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n", + entry->entry_idx, qid); + break; + } + + match = rt2800_txdone_entry_check(entry, reg); + rt2800_txdone_entry(entry, reg, rt2800_drv_get_txwi(entry), match); + } +} +EXPORT_SYMBOL_GPL(rt2800_txdone); + +static inline bool rt2800_entry_txstatus_timeout(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) +{ + bool ret; + unsigned long tout; + + if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) + return false; + + if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags)) + tout = msecs_to_jiffies(50); + else + tout = msecs_to_jiffies(2000); + + ret = time_after(jiffies, entry->last_action + tout); + if (unlikely(ret)) + rt2x00_dbg(entry->queue->rt2x00dev, + "TX status timeout for entry %d in queue %d\n", + entry->entry_idx, entry->queue->qid); + return ret; +} + +bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + struct queue_entry *entry; + + tx_queue_for_each(rt2x00dev, queue) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + if (rt2800_entry_txstatus_timeout(rt2x00dev, entry)) + return true; + } + + return false; +} +EXPORT_SYMBOL_GPL(rt2800_txstatus_timeout); + +/* + * test if there is an entry in any TX queue for which DMA is done + * but the TX status has not been returned yet + */ +bool rt2800_txstatus_pending(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + + tx_queue_for_each(rt2x00dev, queue) { + if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) != + rt2x00queue_get_entry(queue, Q_INDEX_DONE)) + return true; + } + return false; +} +EXPORT_SYMBOL_GPL(rt2800_txstatus_pending); + +void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + struct queue_entry *entry; + + /* + * Process any trailing TX status reports for IO failures, + * we loop until we find the first non-IO error entry. This + * can either be a frame which is free, is being uploaded, + * or has completed the upload but didn't have an entry + * in the TX_STAT_FIFO register yet. + */ + tx_queue_for_each(rt2x00dev, queue) { + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) + break; + + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) || + rt2800_entry_txstatus_timeout(rt2x00dev, entry)) + rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); + else + break; + } + } +} +EXPORT_SYMBOL_GPL(rt2800_txdone_nostatus); + +static int rt2800_check_hung(struct data_queue *queue) +{ + unsigned int cur_idx = rt2800_drv_get_dma_done(queue); + + if (queue->wd_idx != cur_idx) + queue->wd_count = 0; + else + queue->wd_count++; + + return queue->wd_count > 16; +} + +static void rt2800_update_survey(struct rt2x00_dev *rt2x00dev) +{ + struct ieee80211_channel *chan = rt2x00dev->hw->conf.chandef.chan; + struct rt2x00_chan_survey *chan_survey = + &rt2x00dev->chan_survey[chan->hw_value]; + + chan_survey->time_idle += rt2800_register_read(rt2x00dev, CH_IDLE_STA); + chan_survey->time_busy += rt2800_register_read(rt2x00dev, CH_BUSY_STA); + chan_survey->time_ext_busy += rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC); +} + +void rt2800_watchdog(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + bool hung_tx = false; + bool hung_rx = false; + + if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) + return; + + rt2800_update_survey(rt2x00dev); + + queue_for_each(rt2x00dev, queue) { + switch (queue->qid) { + case QID_AC_VO: + case QID_AC_VI: + case QID_AC_BE: + case QID_AC_BK: + case QID_MGMT: + if (rt2x00queue_empty(queue)) + continue; + hung_tx = rt2800_check_hung(queue); + break; + case QID_RX: + /* For station mode we should reactive at least + * beacons. TODO: need to find good way detect + * RX hung for AP mode. + */ + if (rt2x00dev->intf_sta_count == 0) + continue; + hung_rx = rt2800_check_hung(queue); + break; + default: + break; + } + } + + if (hung_tx) + rt2x00_warn(rt2x00dev, "Watchdog TX hung detected\n"); + + if (hung_rx) + rt2x00_warn(rt2x00dev, "Watchdog RX hung detected\n"); + + if (hung_tx || hung_rx) + ieee80211_restart_hw(rt2x00dev->hw); +} +EXPORT_SYMBOL_GPL(rt2800_watchdog); + +static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev, + unsigned int index) +{ + return HW_BEACON_BASE(index); +} + +static inline u8 rt2800_get_beacon_offset(struct rt2x00_dev *rt2x00dev, + unsigned int index) +{ + return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev, index)); +} + +static void rt2800_update_beacons_setup(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue = rt2x00dev->bcn; + struct queue_entry *entry; + int i, bcn_num = 0; + u64 off, reg = 0; + u32 bssid_dw1; + + /* + * Setup offsets of all active beacons in BCN_OFFSET{0,1} registers. + */ + for (i = 0; i < queue->limit; i++) { + entry = &queue->entries[i]; + if (!test_bit(ENTRY_BCN_ENABLED, &entry->flags)) + continue; + off = rt2800_get_beacon_offset(rt2x00dev, entry->entry_idx); + reg |= off << (8 * bcn_num); + bcn_num++; + } + + rt2800_register_write(rt2x00dev, BCN_OFFSET0, (u32) reg); + rt2800_register_write(rt2x00dev, BCN_OFFSET1, (u32) (reg >> 32)); + + /* + * H/W sends up to MAC_BSSID_DW1_BSS_BCN_NUM + 1 consecutive beacons. + */ + bssid_dw1 = rt2800_register_read(rt2x00dev, MAC_BSSID_DW1); + rt2x00_set_field32(&bssid_dw1, MAC_BSSID_DW1_BSS_BCN_NUM, + bcn_num > 0 ? bcn_num - 1 : 0); + rt2800_register_write(rt2x00dev, MAC_BSSID_DW1, bssid_dw1); +} + +void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + unsigned int beacon_base; + unsigned int padding_len; + u32 orig_reg, reg; + const int txwi_desc_size = entry->queue->winfo_size; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG); + orig_reg = reg; + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + /* + * Add space for the TXWI in front of the skb. + */ + memset(skb_push(entry->skb, txwi_desc_size), 0, txwi_desc_size); + + /* + * Register descriptor details in skb frame descriptor. + */ + skbdesc->flags |= SKBDESC_DESC_IN_SKB; + skbdesc->desc = entry->skb->data; + skbdesc->desc_len = txwi_desc_size; + + /* + * Add the TXWI for the beacon to the skb. + */ + rt2800_write_tx_data(entry, txdesc); + + /* + * Dump beacon to userspace through debugfs. + */ + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry); + + /* + * Write entire beacon with TXWI and padding to register. + */ + padding_len = roundup(entry->skb->len, 4) - entry->skb->len; + if (padding_len && skb_pad(entry->skb, padding_len)) { + rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n"); + /* skb freed by skb_pad() on failure */ + entry->skb = NULL; + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg); + return; + } + + beacon_base = rt2800_hw_beacon_base(rt2x00dev, entry->entry_idx); + + rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data, + entry->skb->len + padding_len); + __set_bit(ENTRY_BCN_ENABLED, &entry->flags); + + /* + * Change global beacons settings. + */ + rt2800_update_beacons_setup(rt2x00dev); + + /* + * Restore beaconing state. + */ + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg); + + /* + * Clean up beacon skb. + */ + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; +} +EXPORT_SYMBOL_GPL(rt2800_write_beacon); + +static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev, + unsigned int index) +{ + int i; + const int txwi_desc_size = rt2x00dev->bcn->winfo_size; + unsigned int beacon_base; + + beacon_base = rt2800_hw_beacon_base(rt2x00dev, index); + + /* + * For the Beacon base registers we only need to clear + * the whole TXWI which (when set to 0) will invalidate + * the entire beacon. + */ + for (i = 0; i < txwi_desc_size; i += sizeof(__le32)) + rt2800_register_write(rt2x00dev, beacon_base + i, 0); +} + +void rt2800_clear_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + u32 orig_reg, reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + orig_reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG); + reg = orig_reg; + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + /* + * Clear beacon. + */ + rt2800_clear_beacon_register(rt2x00dev, entry->entry_idx); + __clear_bit(ENTRY_BCN_ENABLED, &entry->flags); + + /* + * Change global beacons settings. + */ + rt2800_update_beacons_setup(rt2x00dev); + /* + * Restore beaconing state. + */ + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg); +} +EXPORT_SYMBOL_GPL(rt2800_clear_beacon); + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +const struct rt2x00debug rt2800_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2800_register_read, + .write = rt2800_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + /* NOTE: The local EEPROM access functions can't + * be used here, use the generic versions instead. + */ + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2800_bbp_read, + .write = rt2800_bbp_write, + .word_base = BBP_BASE, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2800_rf_write, + .word_base = RF_BASE, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, + .rfcsr = { + .read = rt2800_rfcsr_read, + .write = rt2800_rfcsr_write, + .word_base = RFCSR_BASE, + .word_size = sizeof(u8), + .word_count = RFCSR_SIZE / sizeof(u8), + }, +}; +EXPORT_SYMBOL_GPL(rt2800_rt2x00debug); +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + if (rt2x00_rt(rt2x00dev, RT3290)) { + reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL); + return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0); + } else { + reg = rt2800_register_read(rt2x00dev, GPIO_CTRL); + return rt2x00_get_field32(reg, GPIO_CTRL_VAL2); + } +} +EXPORT_SYMBOL_GPL(rt2800_rfkill_poll); + +#ifdef CONFIG_RT2X00_LIB_LEDS +static void rt2800_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ); + unsigned int polarity = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_POLARITY); + unsigned int ledmode = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_MODE); + u32 reg; + + /* Check for SoC (SOC devices don't support MCU requests) */ + if (rt2x00_is_soc(led->rt2x00dev)) { + reg = rt2800_register_read(led->rt2x00dev, LED_CFG); + + /* Set LED Polarity */ + rt2x00_set_field32(®, LED_CFG_LED_POLAR, polarity); + + /* Set LED Mode */ + if (led->type == LED_TYPE_RADIO) { + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, + enabled ? 3 : 0); + } else if (led->type == LED_TYPE_ASSOC) { + rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, + enabled ? 3 : 0); + } else if (led->type == LED_TYPE_QUALITY) { + rt2x00_set_field32(®, LED_CFG_R_LED_MODE, + enabled ? 3 : 0); + } + + rt2800_register_write(led->rt2x00dev, LED_CFG, reg); + + } else { + if (led->type == LED_TYPE_RADIO) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? 0x20 : 0); + } else if (led->type == LED_TYPE_ASSOC) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * The specs tell us the following levels: + * 0, 1 ,3, 7, 15, 31 + * to determine the level in a simple way we can simply + * work with bitshifting: + * (1 << level) - 1 + */ + rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, + (1 << brightness / (LED_FULL / 6)) - 1, + polarity); + } + } +} + +static void rt2800_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2800_brightness_set; + led->flags = LED_INITIALIZED; +} +#endif /* CONFIG_RT2X00_LIB_LEDS */ + +/* + * Configuration handlers. + */ +static void rt2800_config_wcid(struct rt2x00_dev *rt2x00dev, + const u8 *address, + int wcid) +{ + struct mac_wcid_entry wcid_entry; + u32 offset; + + offset = MAC_WCID_ENTRY(wcid); + + memset(&wcid_entry, 0xff, sizeof(wcid_entry)); + if (address) + memcpy(wcid_entry.mac, address, ETH_ALEN); + + rt2800_register_multiwrite(rt2x00dev, offset, + &wcid_entry, sizeof(wcid_entry)); +} + +static void rt2800_delete_wcid_attr(struct rt2x00_dev *rt2x00dev, int wcid) +{ + u32 offset; + offset = MAC_WCID_ATTR_ENTRY(wcid); + rt2800_register_write(rt2x00dev, offset, 0); +} + +static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev *rt2x00dev, + int wcid, u32 bssidx) +{ + u32 offset = MAC_WCID_ATTR_ENTRY(wcid); + u32 reg; + + /* + * The BSS Idx numbers is split in a main value of 3 bits, + * and a extended field for adding one additional bit to the value. + */ + reg = rt2800_register_read(rt2x00dev, offset); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, (bssidx & 0x7)); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT, + (bssidx & 0x8) >> 3); + rt2800_register_write(rt2x00dev, offset, reg); +} + +static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct mac_iveiv_entry iveiv_entry; + u32 offset; + u32 reg; + + offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); + + if (crypto->cmd == SET_KEY) { + reg = rt2800_register_read(rt2x00dev, offset); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); + /* + * Both the cipher as the BSS Idx numbers are split in a main + * value of 3 bits, and a extended field for adding one additional + * bit to the value. + */ + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, + (crypto->cipher & 0x7)); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER_EXT, + (crypto->cipher & 0x8) >> 3); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + } else { + /* Delete the cipher without touching the bssidx */ + reg = rt2800_register_read(rt2x00dev, offset); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, 0); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, 0); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER_EXT, 0); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); + rt2800_register_write(rt2x00dev, offset, reg); + } + + if (test_bit(DEVICE_STATE_RESET, &rt2x00dev->flags)) + return; + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); + + memset(&iveiv_entry, 0, sizeof(iveiv_entry)); + if ((crypto->cipher == CIPHER_TKIP) || + (crypto->cipher == CIPHER_TKIP_NO_MIC) || + (crypto->cipher == CIPHER_AES)) + iveiv_entry.iv[3] |= 0x20; + iveiv_entry.iv[3] |= key->keyidx << 6; + rt2800_register_multiwrite(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); +} + +int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 offset; + u32 reg; + + if (crypto->cmd == SET_KEY) { + key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * The cipher types are stored over multiple registers + * starting with SHARED_KEY_MODE_BASE each word will have + * 32 bits and contains the cipher types for 2 bssidx each. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + field.bit_offset = 4 * (key->hw_key_idx % 8); + field.bit_mask = 0x7 << field.bit_offset; + + offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); + + reg = rt2800_register_read(rt2x00dev, offset); + rt2x00_set_field32(®, field, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + + /* + * Update WCID information + */ + rt2800_config_wcid(rt2x00dev, crypto->address, key->hw_key_idx); + rt2800_config_wcid_attr_bssidx(rt2x00dev, key->hw_key_idx, + crypto->bssidx); + rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_shared_key); + +int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + u32 offset; + + if (crypto->cmd == SET_KEY) { + /* + * Allow key configuration only for STAs that are + * known by the hw. + */ + if (crypto->wcid > WCID_END) + return -ENOSPC; + key->hw_key_idx = crypto->wcid; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * Update WCID information + */ + rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key); + +static void rt2800_set_max_psdu_len(struct rt2x00_dev *rt2x00dev) +{ + u8 i, max_psdu; + u32 reg; + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + + for (i = 0; i < 3; i++) + if (drv_data->ampdu_factor_cnt[i] > 0) + break; + + max_psdu = min(drv_data->max_psdu, i); + + reg = rt2800_register_read(rt2x00dev, MAX_LEN_CFG); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, max_psdu); + rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg); +} + +int rt2800_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta); + int wcid; + + /* + * Limit global maximum TX AMPDU length to smallest value of all + * connected stations. In AP mode this can be suboptimal, but we + * do not have a choice if some connected STA is not capable to + * receive the same amount of data like the others. + */ + if (sta->deflink.ht_cap.ht_supported) { + drv_data->ampdu_factor_cnt[sta->deflink.ht_cap.ampdu_factor & 3]++; + rt2800_set_max_psdu_len(rt2x00dev); + } + + /* + * Search for the first free WCID entry and return the corresponding + * index. + */ + wcid = find_first_zero_bit(drv_data->sta_ids, STA_IDS_SIZE) + WCID_START; + + /* + * Store selected wcid even if it is invalid so that we can + * later decide if the STA is uploaded into the hw. + */ + sta_priv->wcid = wcid; + + /* + * No space left in the device, however, we can still communicate + * with the STA -> No error. + */ + if (wcid > WCID_END) + return 0; + + __set_bit(wcid - WCID_START, drv_data->sta_ids); + drv_data->wcid_to_sta[wcid - WCID_START] = sta; + + /* + * Clean up WCID attributes and write STA address to the device. + */ + rt2800_delete_wcid_attr(rt2x00dev, wcid); + rt2800_config_wcid(rt2x00dev, sta->addr, wcid); + rt2800_config_wcid_attr_bssidx(rt2x00dev, wcid, + rt2x00lib_get_bssidx(rt2x00dev, vif)); + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_sta_add); + +int rt2800_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta); + int wcid = sta_priv->wcid; + + if (sta->deflink.ht_cap.ht_supported) { + drv_data->ampdu_factor_cnt[sta->deflink.ht_cap.ampdu_factor & 3]--; + rt2800_set_max_psdu_len(rt2x00dev); + } + + if (wcid > WCID_END) + return 0; + /* + * Remove WCID entry, no need to clean the attributes as they will + * get renewed when the WCID is reused. + */ + rt2800_config_wcid(rt2x00dev, NULL, wcid); + drv_data->wcid_to_sta[wcid - WCID_START] = NULL; + __clear_bit(wcid - WCID_START, drv_data->sta_ids); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_sta_remove); + +void rt2800_pre_reset_hw(struct rt2x00_dev *rt2x00dev) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + struct data_queue *queue = rt2x00dev->bcn; + struct queue_entry *entry; + int i, wcid; + + for (wcid = WCID_START; wcid < WCID_END; wcid++) { + drv_data->wcid_to_sta[wcid - WCID_START] = NULL; + __clear_bit(wcid - WCID_START, drv_data->sta_ids); + } + + for (i = 0; i < queue->limit; i++) { + entry = &queue->entries[i]; + clear_bit(ENTRY_BCN_ASSIGNED, &entry->flags); + } +} +EXPORT_SYMBOL_GPL(rt2800_pre_reset_hw); + +void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) +{ + u32 reg; + + /* + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. + */ + reg = rt2800_register_read(rt2x00dev, RX_FILTER_CFG); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, + !(filter_flags & FIF_PSPOLL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, + !(filter_flags & FIF_CONTROL)); + rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_config_filter); + +void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, const unsigned int flags) +{ + u32 reg; + bool update_bssid = false; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Enable synchronisation. + */ + reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + if (conf->sync == TSF_SYNC_AP_NONE) { + /* + * Tune beacon queue transmit parameters for AP mode + */ + reg = rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG); + rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 0); + rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 1); + rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32); + rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 0); + rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg); + } else { + reg = rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG); + rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 4); + rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 2); + rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32); + rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 16); + rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg); + } + } + + if (flags & CONFIG_UPDATE_MAC) { + if (flags & CONFIG_UPDATE_TYPE && + conf->sync == TSF_SYNC_AP_NONE) { + /* + * The BSSID register has to be set to our own mac + * address in AP mode. + */ + memcpy(conf->bssid, conf->mac, sizeof(conf->mac)); + update_bssid = true; + } + + if (!is_zero_ether_addr((const u8 *)conf->mac)) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + } + + rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, + conf->mac, sizeof(conf->mac)); + } + + if ((flags & CONFIG_UPDATE_BSSID) || update_bssid) { + if (!is_zero_ether_addr((const u8 *)conf->bssid)) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 3); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); + conf->bssid[1] = cpu_to_le32(reg); + } + + rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, + conf->bssid, sizeof(conf->bssid)); + } +} +EXPORT_SYMBOL_GPL(rt2800_config_intf); + +static void rt2800_config_ht_opmode(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) +{ + bool any_sta_nongf = !!(erp->ht_opmode & + IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + u8 protection = erp->ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION; + u8 mm20_mode, mm40_mode, gf20_mode, gf40_mode; + u16 mm20_rate, mm40_rate, gf20_rate, gf40_rate; + u32 reg; + + /* default protection rate for HT20: OFDM 24M */ + mm20_rate = gf20_rate = 0x4004; + + /* default protection rate for HT40: duplicate OFDM 24M */ + mm40_rate = gf40_rate = 0x4084; + + switch (protection) { + case IEEE80211_HT_OP_MODE_PROTECTION_NONE: + /* + * All STAs in this BSS are HT20/40 but there might be + * STAs not supporting greenfield mode. + * => Disable protection for HT transmissions. + */ + mm20_mode = mm40_mode = gf20_mode = gf40_mode = 0; + + break; + case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: + /* + * All STAs in this BSS are HT20 or HT20/40 but there + * might be STAs not supporting greenfield mode. + * => Protect all HT40 transmissions. + */ + mm20_mode = gf20_mode = 0; + mm40_mode = gf40_mode = 1; + + break; + case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: + /* + * Nonmember protection: + * According to 802.11n we _should_ protect all + * HT transmissions (but we don't have to). + * + * But if cts_protection is enabled we _shall_ protect + * all HT transmissions using a CCK rate. + * + * And if any station is non GF we _shall_ protect + * GF transmissions. + * + * We decide to protect everything + * -> fall through to mixed mode. + */ + case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: + /* + * Legacy STAs are present + * => Protect all HT transmissions. + */ + mm20_mode = mm40_mode = gf20_mode = gf40_mode = 1; + + /* + * If erp protection is needed we have to protect HT + * transmissions with CCK 11M long preamble. + */ + if (erp->cts_protection) { + /* don't duplicate RTS/CTS in CCK mode */ + mm20_rate = mm40_rate = 0x0003; + gf20_rate = gf40_rate = 0x0003; + } + break; + } + + /* check for STAs not supporting greenfield mode */ + if (any_sta_nongf) + gf20_mode = gf40_mode = 1; + + /* Update HT protection config */ + reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, mm20_rate); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, mm20_mode); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, mm40_rate); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, mm40_mode); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, gf20_rate); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, gf20_mode); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, gf40_rate); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, gf40_mode); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); +} + +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp, + u32 changed) +{ + u32 reg; + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + reg = rt2800_register_read(rt2x00dev, AUTO_RSP_CFG); + rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, + !!erp->short_preamble); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + } + + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, + erp->cts_protection ? 2 : 0); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + } + + if (changed & BSS_CHANGED_BASIC_RATES) { + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, + 0xff0 | erp->basic_rates); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + } + + if (changed & BSS_CHANGED_ERP_SLOT) { + reg = rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, + erp->slot_time); + rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, XIFS_TIME_CFG); + rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); + rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); + } + + if (changed & BSS_CHANGED_BEACON_INT) { + reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + + if (changed & BSS_CHANGED_HT) + rt2800_config_ht_opmode(rt2x00dev, erp); +} +EXPORT_SYMBOL_GPL(rt2800_config_erp); + +static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev, + const struct rt2x00_field32 mask) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); + if (!rt2x00_get_field32(reg, mask)) + return 0; + + udelay(REGISTER_BUSY_DELAY); + } + + rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n"); + return -EACCES; +} + +static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u8 value; + + /* + * BBP was enabled after firmware was loaded, + * but we need to reactivate it now. + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + msleep(1); + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + value = rt2800_bbp_read(rt2x00dev, 0); + if ((value != 0xff) && (value != 0x00)) + return 0; + udelay(REGISTER_BUSY_DELAY); + } + + rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); + return -EACCES; +} + +static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 eeprom; + u8 led_ctrl, led_g_mode, led_r_mode; + + reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH); + if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) { + rt2x00_set_field32(®, GPIO_SWITCH_0, 1); + rt2x00_set_field32(®, GPIO_SWITCH_1, 1); + } else { + rt2x00_set_field32(®, GPIO_SWITCH_0, 0); + rt2x00_set_field32(®, GPIO_SWITCH_1, 0); + } + rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); + + reg = rt2800_register_read(rt2x00dev, LED_CFG); + led_g_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 3 : 0; + led_r_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 0 : 3; + if (led_g_mode != rt2x00_get_field32(reg, LED_CFG_G_LED_MODE) || + led_r_mode != rt2x00_get_field32(reg, LED_CFG_R_LED_MODE)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ); + led_ctrl = rt2x00_get_field16(eeprom, EEPROM_FREQ_LED_MODE); + if (led_ctrl == 0 || led_ctrl > 0x40) { + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, led_g_mode); + rt2x00_set_field32(®, LED_CFG_R_LED_MODE, led_r_mode); + rt2800_register_write(rt2x00dev, LED_CFG, reg); + } else { + rt2800_mcu_request(rt2x00dev, MCU_BAND_SELECT, 0xff, + (led_g_mode << 2) | led_r_mode, 1); + } + } +} + +static void rt2800_set_ant_diversity(struct rt2x00_dev *rt2x00dev, + enum antenna ant) +{ + u32 reg; + u8 eesk_pin = (ant == ANTENNA_A) ? 1 : 0; + u8 gpio_bit3 = (ant == ANTENNA_A) ? 0 : 1; + + if (rt2x00_is_pci(rt2x00dev)) { + reg = rt2800_register_read(rt2x00dev, E2PROM_CSR); + rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, eesk_pin); + rt2800_register_write(rt2x00dev, E2PROM_CSR, reg); + } else if (rt2x00_is_usb(rt2x00dev)) + rt2800_mcu_request(rt2x00dev, MCU_ANT_SELECT, 0xff, + eesk_pin, 0); + + reg = rt2800_register_read(rt2x00dev, GPIO_CTRL); + rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0); + rt2x00_set_field32(®, GPIO_CTRL_VAL3, gpio_bit3); + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); +} + +void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) +{ + u8 r1; + u8 r3; + u16 eeprom; + + r1 = rt2800_bbp_read(rt2x00dev, 1); + r3 = rt2800_bbp_read(rt2x00dev, 3); + + if (rt2x00_rt(rt2x00dev, RT3572) && + rt2x00_has_cap_bt_coexist(rt2x00dev)) + rt2800_config_3572bt_ant(rt2x00dev); + + /* + * Configure the TX antenna. + */ + switch (ant->tx_chain_num) { + case 1: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); + break; + case 2: + if (rt2x00_rt(rt2x00dev, RT3572) && + rt2x00_has_cap_bt_coexist(rt2x00dev)) + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1); + else + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); + break; + case 3: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); + break; + } + + /* + * Configure the RX antenna. + */ + switch (ant->rx_chain_num) { + case 1: + if (rt2x00_rt(rt2x00dev, RT3070) || + rt2x00_rt(rt2x00dev, RT3090) || + rt2x00_rt(rt2x00dev, RT3352) || + rt2x00_rt(rt2x00dev, RT3390)) { + eeprom = rt2800_eeprom_read(rt2x00dev, + EEPROM_NIC_CONF1); + if (rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF1_ANT_DIVERSITY)) + rt2800_set_ant_diversity(rt2x00dev, + rt2x00dev->default_ant.rx); + } + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + if (rt2x00_rt(rt2x00dev, RT3572) && + rt2x00_has_cap_bt_coexist(rt2x00dev)) { + rt2x00_set_field8(&r3, BBP3_RX_ADC, 1); + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, + rt2x00dev->curr_band == NL80211_BAND_5GHZ); + rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B); + } else { + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); + } + break; + case 3: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); + break; + } + + rt2800_bbp_write(rt2x00dev, 3, r3); + rt2800_bbp_write(rt2x00dev, 1, r1); + + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) { + if (ant->rx_chain_num == 1) + rt2800_bbp_write(rt2x00dev, 86, 0x00); + else + rt2800_bbp_write(rt2x00dev, 86, 0x46); + } +} +EXPORT_SYMBOL_GPL(rt2800_config_ant); + +static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain; + + if (libconf->rf.channel <= 14) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); + } else if (libconf->rf.channel <= 64) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); + } else if (libconf->rf.channel <= 128) { + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); + lna_gain = rt2x00_get_field16(eeprom, + EEPROM_EXT_LNA2_A1); + } else { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2); + lna_gain = rt2x00_get_field16(eeprom, + EEPROM_RSSI_BG2_LNA_A1); + } + } else { + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); + lna_gain = rt2x00_get_field16(eeprom, + EEPROM_EXT_LNA2_A2); + } else { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2); + lna_gain = rt2x00_get_field16(eeprom, + EEPROM_RSSI_A2_LNA_A2); + } + } + + rt2x00dev->lna_gain = lna_gain; +} + +static inline bool rt2800_clk_is_20mhz(struct rt2x00_dev *rt2x00dev) +{ + return clk_get_rate(rt2x00dev->clk) == 20000000; +} + +#define FREQ_OFFSET_BOUND 0x5f + +static void rt2800_freq_cal_mode1(struct rt2x00_dev *rt2x00dev) +{ + u8 freq_offset, prev_freq_offset; + u8 rfcsr, prev_rfcsr; + + freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE); + freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 17); + prev_rfcsr = rfcsr; + + rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset); + if (rfcsr == prev_rfcsr) + return; + + if (rt2x00_is_usb(rt2x00dev)) { + rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff, + freq_offset, prev_rfcsr); + return; + } + + prev_freq_offset = rt2x00_get_field8(prev_rfcsr, RFCSR17_CODE); + while (prev_freq_offset != freq_offset) { + if (prev_freq_offset < freq_offset) + prev_freq_offset++; + else + prev_freq_offset--; + + rt2x00_set_field8(&rfcsr, RFCSR17_CODE, prev_freq_offset); + rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); + + usleep_range(1000, 1500); + } +} + +static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + if (rt2x00dev->default_ant.tx_chain_num == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); + + if (rt2x00dev->default_ant.rx_chain_num == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + } else if (rt2x00dev->default_ant.rx_chain_num == 2) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + + if (rf->channel > 14) { + /* + * When TX power is below 0, we should increase it by 7 to + * make it a positive value (Minimum value is -7). + * However this means that values between 0 and 7 have + * double meaning, and we should set a 7DBm boost flag. + */ + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, + (info->default_power1 >= 0)); + + if (info->default_power1 < 0) + info->default_power1 += 7; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1); + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, + (info->default_power2 >= 0)); + + if (info->default_power2 < 0) + info->default_power2 += 7; + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2); + } else { + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2); + } + + rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); +} + +static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 rfcsr, calib_tx, calib_rx; + + rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); + rt2x00_set_field8(&rfcsr, RFCSR3_K, rf->rf3); + rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); + rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 12); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1); + rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 13); + rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2); + rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, + rt2x00dev->default_ant.rx_chain_num <= 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, + rt2x00dev->default_ant.rx_chain_num <= 2); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, + rt2x00dev->default_ant.tx_chain_num <= 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, + rt2x00dev->default_ant.tx_chain_num <= 2); + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 23); + rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); + + if (rt2x00_rt(rt2x00dev, RT3390)) { + calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f; + calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f; + } else { + if (conf_is_ht40(conf)) { + calib_tx = drv_data->calibration_bw40; + calib_rx = drv_data->calibration_bw40; + } else { + calib_tx = drv_data->calibration_bw20; + calib_rx = drv_data->calibration_bw20; + } + } + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 24); + rt2x00_set_field8(&rfcsr, RFCSR24_TX_CALIB, calib_tx); + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 31); + rt2x00_set_field8(&rfcsr, RFCSR31_RX_CALIB, calib_rx); + rt2800_rfcsr_write(rt2x00dev, 31, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 7); + rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); + rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + usleep_range(1000, 1500); + + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); +} + +static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 rfcsr; + u32 reg; + + if (rf->channel <= 14) { + rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25); + rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26); + } else { + rt2800_bbp_write(rt2x00dev, 25, 0x09); + rt2800_bbp_write(rt2x00dev, 26, 0xff); + } + + rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); + rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 2); + else + rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 1); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 5); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR5_R1, 1); + else + rt2x00_set_field8(&rfcsr, RFCSR5_R1, 2); + rt2800_rfcsr_write(rt2x00dev, 5, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 12); + if (rf->channel <= 14) { + rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, + info->default_power1); + } else { + rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, + (info->default_power1 & 0x3) | + ((info->default_power1 & 0xC) << 1)); + } + rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 13); + if (rf->channel <= 14) { + rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3); + rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, + info->default_power2); + } else { + rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7); + rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, + (info->default_power2 & 0x3) | + ((info->default_power2 & 0xC) << 1)); + } + rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { + if (rf->channel <= 14) { + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); + } + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); + } else { + switch (rt2x00dev->default_ant.tx_chain_num) { + case 1: + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); + fallthrough; + case 2: + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); + break; + } + + switch (rt2x00dev->default_ant.rx_chain_num) { + case 1: + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); + fallthrough; + case 2: + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); + break; + } + } + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 23); + rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); + + if (conf_is_ht40(conf)) { + rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40); + rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40); + } else { + rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20); + rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20); + } + + if (rf->channel <= 14) { + rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); + rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); + rt2800_rfcsr_write(rt2x00dev, 15, 0x53); + rfcsr = 0x4c; + rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN, + drv_data->txmixer_gain_24g); + rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 17, 0x23); + rt2800_rfcsr_write(rt2x00dev, 19, 0x93); + rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 25, 0x15); + rt2800_rfcsr_write(rt2x00dev, 26, 0x85); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); + } else { + rfcsr = rt2800_rfcsr_read(rt2x00dev, 7); + rt2x00_set_field8(&rfcsr, RFCSR7_BIT2, 1); + rt2x00_set_field8(&rfcsr, RFCSR7_BIT3, 0); + rt2x00_set_field8(&rfcsr, RFCSR7_BIT4, 1); + rt2x00_set_field8(&rfcsr, RFCSR7_BITS67, 0); + rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 11, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x43); + rfcsr = 0x7a; + rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN, + drv_data->txmixer_gain_5g); + rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 17, 0x23); + if (rf->channel <= 64) { + rt2800_rfcsr_write(rt2x00dev, 19, 0xb7); + rt2800_rfcsr_write(rt2x00dev, 20, 0xf6); + rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); + } else if (rf->channel <= 128) { + rt2800_rfcsr_write(rt2x00dev, 19, 0x74); + rt2800_rfcsr_write(rt2x00dev, 20, 0xf4); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + } else { + rt2800_rfcsr_write(rt2x00dev, 19, 0x72); + rt2800_rfcsr_write(rt2x00dev, 20, 0xf3); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + } + rt2800_rfcsr_write(rt2x00dev, 26, 0x87); + rt2800_rfcsr_write(rt2x00dev, 27, 0x01); + rt2800_rfcsr_write(rt2x00dev, 29, 0x9f); + } + + reg = rt2800_register_read(rt2x00dev, GPIO_CTRL); + rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0); + if (rf->channel <= 14) + rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1); + else + rt2x00_set_field32(®, GPIO_CTRL_VAL7, 0); + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 7); + rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); + rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); +} + +static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 txrx_agc_fc; + u8 txrx_h20m; + u8 rfcsr; + u8 bbp; + const bool txbf_enabled = false; /* TODO */ + + /* TODO: use TX{0,1,2}FinePowerControl values from EEPROM */ + bbp = rt2800_bbp_read(rt2x00dev, 109); + rt2x00_set_field8(&bbp, BBP109_TX0_POWER, 0); + rt2x00_set_field8(&bbp, BBP109_TX1_POWER, 0); + rt2800_bbp_write(rt2x00dev, 109, bbp); + + bbp = rt2800_bbp_read(rt2x00dev, 110); + rt2x00_set_field8(&bbp, BBP110_TX2_POWER, 0); + rt2800_bbp_write(rt2x00dev, 110, bbp); + + if (rf->channel <= 14) { + /* Restore BBP 25 & 26 for 2.4 GHz */ + rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25); + rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26); + } else { + /* Hard code BBP 25 & 26 for 5GHz */ + + /* Enable IQ Phase correction */ + rt2800_bbp_write(rt2x00dev, 25, 0x09); + /* Setup IQ Phase correction value */ + rt2800_bbp_write(rt2x00dev, 26, 0xff); + } + + rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3 & 0xf); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 11); + rt2x00_set_field8(&rfcsr, RFCSR11_R, (rf->rf2 & 0x3)); + rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 11); + rt2x00_set_field8(&rfcsr, RFCSR11_PLL_IDOH, 1); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 1); + else + rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 2); + rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 53); + if (rf->channel <= 14) { + rfcsr = 0; + rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER, + info->default_power1 & 0x1f); + } else { + if (rt2x00_is_usb(rt2x00dev)) + rfcsr = 0x40; + + rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER, + ((info->default_power1 & 0x18) << 1) | + (info->default_power1 & 7)); + } + rt2800_rfcsr_write(rt2x00dev, 53, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 55); + if (rf->channel <= 14) { + rfcsr = 0; + rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER, + info->default_power2 & 0x1f); + } else { + if (rt2x00_is_usb(rt2x00dev)) + rfcsr = 0x40; + + rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER, + ((info->default_power2 & 0x18) << 1) | + (info->default_power2 & 7)); + } + rt2800_rfcsr_write(rt2x00dev, 55, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 54); + if (rf->channel <= 14) { + rfcsr = 0; + rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER, + info->default_power3 & 0x1f); + } else { + if (rt2x00_is_usb(rt2x00dev)) + rfcsr = 0x40; + + rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER, + ((info->default_power3 & 0x18) << 1) | + (info->default_power3 & 7)); + } + rt2800_rfcsr_write(rt2x00dev, 54, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); + + switch (rt2x00dev->default_ant.tx_chain_num) { + case 3: + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); + fallthrough; + case 2: + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); + fallthrough; + case 1: + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); + break; + } + + switch (rt2x00dev->default_ant.rx_chain_num) { + case 3: + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); + fallthrough; + case 2: + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); + fallthrough; + case 1: + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); + break; + } + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rt2800_freq_cal_mode1(rt2x00dev); + + if (conf_is_ht40(conf)) { + txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, + RFCSR24_TX_AGC_FC); + txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw40, + RFCSR24_TX_H20M); + } else { + txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw20, + RFCSR24_TX_AGC_FC); + txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw20, + RFCSR24_TX_H20M); + } + + /* NOTE: the reference driver does not writes the new value + * back to RFCSR 32 + */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 32); + rt2x00_set_field8(&rfcsr, RFCSR32_TX_AGC_FC, txrx_agc_fc); + + if (rf->channel <= 14) + rfcsr = 0xa0; + else + rfcsr = 0x80; + rt2800_rfcsr_write(rt2x00dev, 31, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); + rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, txrx_h20m); + rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, txrx_h20m); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + /* Band selection */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 36); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1); + else + rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0); + rt2800_rfcsr_write(rt2x00dev, 36, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 34); + if (rf->channel <= 14) + rfcsr = 0x3c; + else + rfcsr = 0x20; + rt2800_rfcsr_write(rt2x00dev, 34, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 12); + if (rf->channel <= 14) + rfcsr = 0x1a; + else + rfcsr = 0x12; + rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); + if (rf->channel >= 1 && rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1); + else if (rf->channel >= 36 && rf->channel <= 64) + rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2); + else if (rf->channel >= 100 && rf->channel <= 128) + rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2); + else + rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); + rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 46, 0x60); + + if (rf->channel <= 14) { + rt2800_rfcsr_write(rt2x00dev, 10, 0xd3); + rt2800_rfcsr_write(rt2x00dev, 13, 0x12); + } else { + rt2800_rfcsr_write(rt2x00dev, 10, 0xd8); + rt2800_rfcsr_write(rt2x00dev, 13, 0x23); + } + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 51); + rt2x00_set_field8(&rfcsr, RFCSR51_BITS01, 1); + rt2800_rfcsr_write(rt2x00dev, 51, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 51); + if (rf->channel <= 14) { + rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 5); + rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 3); + } else { + rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 4); + rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 2); + } + rt2800_rfcsr_write(rt2x00dev, 51, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 49); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 3); + else + rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 2); + + if (txbf_enabled) + rt2x00_set_field8(&rfcsr, RFCSR49_TX_DIV, 1); + + rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 50); + rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO1_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 57); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x1b); + else + rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 57, rfcsr); + + if (rf->channel <= 14) { + rt2800_rfcsr_write(rt2x00dev, 44, 0x93); + rt2800_rfcsr_write(rt2x00dev, 52, 0x45); + } else { + rt2800_rfcsr_write(rt2x00dev, 44, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 52, 0x05); + } + + /* Initiate VCO calibration */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); + if (rf->channel <= 14) { + rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); + } else { + rt2x00_set_field8(&rfcsr, RFCSR3_BIT1, 1); + rt2x00_set_field8(&rfcsr, RFCSR3_BIT2, 1); + rt2x00_set_field8(&rfcsr, RFCSR3_BIT3, 1); + rt2x00_set_field8(&rfcsr, RFCSR3_BIT4, 1); + rt2x00_set_field8(&rfcsr, RFCSR3_BIT5, 1); + rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); + } + rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); + + if (rf->channel >= 1 && rf->channel <= 14) { + rfcsr = 0x23; + if (txbf_enabled) + rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); + rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 45, 0xbb); + } else if (rf->channel >= 36 && rf->channel <= 64) { + rfcsr = 0x36; + if (txbf_enabled) + rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); + rt2800_rfcsr_write(rt2x00dev, 39, 0x36); + + rt2800_rfcsr_write(rt2x00dev, 45, 0xeb); + } else if (rf->channel >= 100 && rf->channel <= 128) { + rfcsr = 0x32; + if (txbf_enabled) + rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); + rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 45, 0xb3); + } else { + rfcsr = 0x30; + if (txbf_enabled) + rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); + rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 45, 0x9b); + } +} + +static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + u8 bbp; + u8 pwr1, pwr2, pwr3; + + const bool txbf_enabled = false; /* TODO */ + + /* TODO: add band selection */ + + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 6, 0x40); + else if (rf->channel < 132) + rt2800_rfcsr_write(rt2x00dev, 6, 0x80); + else + rt2800_rfcsr_write(rt2x00dev, 6, 0x40); + + rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); + + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 11, 0x46); + else + rt2800_rfcsr_write(rt2x00dev, 11, 0x48); + + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 12, 0x1a); + else + rt2800_rfcsr_write(rt2x00dev, 12, 0x52); + + rt2800_rfcsr_write(rt2x00dev, 13, 0x12); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); + + switch (rt2x00dev->default_ant.tx_chain_num) { + case 3: + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); + fallthrough; + case 2: + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); + fallthrough; + case 1: + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); + break; + } + + switch (rt2x00dev->default_ant.rx_chain_num) { + case 3: + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); + fallthrough; + case 2: + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); + fallthrough; + case 1: + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); + break; + } + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rt2800_freq_cal_mode1(rt2x00dev); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); + if (!conf_is_ht40(conf)) + rfcsr &= ~(0x06); + else + rfcsr |= 0x06; + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 31, 0xa0); + else + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + + if (conf_is_ht40(conf)) + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + else + rt2800_rfcsr_write(rt2x00dev, 32, 0xd8); + + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 34, 0x3c); + else + rt2800_rfcsr_write(rt2x00dev, 34, 0x20); + + /* loopback RF_BS */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 36); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1); + else + rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0); + rt2800_rfcsr_write(rt2x00dev, 36, rfcsr); + + if (rf->channel <= 14) + rfcsr = 0x23; + else if (rf->channel < 100) + rfcsr = 0x36; + else if (rf->channel < 132) + rfcsr = 0x32; + else + rfcsr = 0x30; + + if (txbf_enabled) + rfcsr |= 0x40; + + rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); + + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 44, 0x93); + else + rt2800_rfcsr_write(rt2x00dev, 44, 0x9b); + + if (rf->channel <= 14) + rfcsr = 0xbb; + else if (rf->channel < 100) + rfcsr = 0xeb; + else if (rf->channel < 132) + rfcsr = 0xb3; + else + rfcsr = 0x9b; + rt2800_rfcsr_write(rt2x00dev, 45, rfcsr); + + if (rf->channel <= 14) + rfcsr = 0x8e; + else + rfcsr = 0x8a; + + if (txbf_enabled) + rfcsr |= 0x20; + + rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 50, 0x86); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 51); + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 51, 0x75); + else + rt2800_rfcsr_write(rt2x00dev, 51, 0x51); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 52); + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 52, 0x45); + else + rt2800_rfcsr_write(rt2x00dev, 52, 0x05); + + if (rf->channel <= 14) { + pwr1 = info->default_power1 & 0x1f; + pwr2 = info->default_power2 & 0x1f; + pwr3 = info->default_power3 & 0x1f; + } else { + pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) | + (info->default_power1 & 0x7); + pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) | + (info->default_power2 & 0x7); + pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) | + (info->default_power3 & 0x7); + } + + rt2800_rfcsr_write(rt2x00dev, 53, pwr1); + rt2800_rfcsr_write(rt2x00dev, 54, pwr2); + rt2800_rfcsr_write(rt2x00dev, 55, pwr3); + + rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n", + rf->channel, pwr1, pwr2, pwr3); + + bbp = (info->default_power1 >> 5) | + ((info->default_power2 & 0xe0) >> 1); + rt2800_bbp_write(rt2x00dev, 109, bbp); + + bbp = rt2800_bbp_read(rt2x00dev, 110); + bbp &= 0x0f; + bbp |= (info->default_power3 & 0xe0) >> 1; + rt2800_bbp_write(rt2x00dev, 110, bbp); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 57); + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 57, 0x6e); + else + rt2800_rfcsr_write(rt2x00dev, 57, 0x3e); + + /* Enable RF tuning */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); + rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); + + udelay(2000); + + bbp = rt2800_bbp_read(rt2x00dev, 49); + /* clear update flag */ + rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe); + rt2800_bbp_write(rt2x00dev, 49, bbp); + + /* TODO: add calibration for TxBF */ +} + +#define POWER_BOUND 0x27 +#define POWER_BOUND_5G 0x2b + +static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + + rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); + rfcsr = rt2800_rfcsr_read(rt2x00dev, 11); + rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2); + rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 49); + if (info->default_power1 > POWER_BOUND) + rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND); + else + rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); + rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); + + rt2800_freq_cal_mode1(rt2x00dev); + + if (rf->channel <= 14) { + if (rf->channel == 6) + rt2800_bbp_write(rt2x00dev, 68, 0x0c); + else + rt2800_bbp_write(rt2x00dev, 68, 0x0b); + + if (rf->channel >= 1 && rf->channel <= 6) + rt2800_bbp_write(rt2x00dev, 59, 0x0f); + else if (rf->channel >= 7 && rf->channel <= 11) + rt2800_bbp_write(rt2x00dev, 59, 0x0e); + else if (rf->channel >= 12 && rf->channel <= 14) + rt2800_bbp_write(rt2x00dev, 59, 0x0d); + } +} + +static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + + rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); + + rt2800_rfcsr_write(rt2x00dev, 11, 0x42); + rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + + if (info->default_power1 > POWER_BOUND) + rt2800_rfcsr_write(rt2x00dev, 47, POWER_BOUND); + else + rt2800_rfcsr_write(rt2x00dev, 47, info->default_power1); + + if (info->default_power2 > POWER_BOUND) + rt2800_rfcsr_write(rt2x00dev, 48, POWER_BOUND); + else + rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2); + + rt2800_freq_cal_mode1(rt2x00dev); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); + + if ( rt2x00dev->default_ant.tx_chain_num == 2 ) + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); + else + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); + + if ( rt2x00dev->default_ant.rx_chain_num == 2 ) + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); + else + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); + + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); + + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 31, 80); +} + +static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + int idx = rf->channel-1; + + rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); + rfcsr = rt2800_rfcsr_read(rt2x00dev, 11); + rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2); + rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 49); + if (info->default_power1 > POWER_BOUND) + rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND); + else + rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); + rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); + + if (rt2x00_rt(rt2x00dev, RT5392)) { + rfcsr = rt2800_rfcsr_read(rt2x00dev, 50); + if (info->default_power2 > POWER_BOUND) + rt2x00_set_field8(&rfcsr, RFCSR50_TX, POWER_BOUND); + else + rt2x00_set_field8(&rfcsr, RFCSR50_TX, + info->default_power2); + rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); + } + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + if (rt2x00_rt(rt2x00dev, RT5392)) { + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); + } + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rt2800_freq_cal_mode1(rt2x00dev); + + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { + /* r55/r59 value array of channel 1~14 */ + static const u8 r55_bt_rev[] = {0x83, 0x83, + 0x83, 0x73, 0x73, 0x63, 0x53, 0x53, + 0x53, 0x43, 0x43, 0x43, 0x43, 0x43}; + static const u8 r59_bt_rev[] = {0x0e, 0x0e, + 0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07}; + + rt2800_rfcsr_write(rt2x00dev, 55, + r55_bt_rev[idx]); + rt2800_rfcsr_write(rt2x00dev, 59, + r59_bt_rev[idx]); + } else { + static const u8 r59_bt[] = {0x8b, 0x8b, 0x8b, + 0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89, + 0x88, 0x88, 0x86, 0x85, 0x84}; + + rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]); + } + } else { + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { + static const u8 r55_nonbt_rev[] = {0x23, 0x23, + 0x23, 0x23, 0x13, 0x13, 0x03, 0x03, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03}; + static const u8 r59_nonbt_rev[] = {0x07, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x07, 0x07, 0x06, 0x05, 0x04, 0x04}; + + rt2800_rfcsr_write(rt2x00dev, 55, + r55_nonbt_rev[idx]); + rt2800_rfcsr_write(rt2x00dev, 59, + r59_nonbt_rev[idx]); + } else if (rt2x00_rt(rt2x00dev, RT5390) || + rt2x00_rt(rt2x00dev, RT5392) || + rt2x00_rt(rt2x00dev, RT6352)) { + static const u8 r59_non_bt[] = {0x8f, 0x8f, + 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d, + 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86}; + + rt2800_rfcsr_write(rt2x00dev, 59, + r59_non_bt[idx]); + } else if (rt2x00_rt(rt2x00dev, RT5350)) { + static const u8 r59_non_bt[] = {0x0b, 0x0b, + 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0a, + 0x0a, 0x09, 0x08, 0x07, 0x07, 0x06}; + + rt2800_rfcsr_write(rt2x00dev, 59, + r59_non_bt[idx]); + } + } +} + +static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr, ep_reg; + u32 reg; + int power_bound; + + /* TODO */ + const bool is_11b = false; + const bool is_type_ep = false; + + reg = rt2800_register_read(rt2x00dev, LDO_CFG0); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, + (rf->channel > 14 || conf_is_ht40(conf)) ? 5 : 0); + rt2800_register_write(rt2x00dev, LDO_CFG0, reg); + + /* Order of values on rf_channel entry: N, K, mod, R */ + rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1 & 0xff); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 9); + rt2x00_set_field8(&rfcsr, RFCSR9_K, rf->rf2 & 0xf); + rt2x00_set_field8(&rfcsr, RFCSR9_N, (rf->rf1 & 0x100) >> 8); + rt2x00_set_field8(&rfcsr, RFCSR9_MOD, ((rf->rf3 - 8) & 0x4) >> 2); + rt2800_rfcsr_write(rt2x00dev, 9, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 11); + rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf4 - 1); + rt2x00_set_field8(&rfcsr, RFCSR11_MOD, (rf->rf3 - 8) & 0x3); + rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); + + if (rf->channel <= 14) { + rt2800_rfcsr_write(rt2x00dev, 10, 0x90); + /* FIXME: RF11 owerwrite ? */ + rt2800_rfcsr_write(rt2x00dev, 11, 0x4A); + rt2800_rfcsr_write(rt2x00dev, 12, 0x52); + rt2800_rfcsr_write(rt2x00dev, 13, 0x42); + rt2800_rfcsr_write(rt2x00dev, 22, 0x40); + rt2800_rfcsr_write(rt2x00dev, 24, 0x4A); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 27, 0x42); + rt2800_rfcsr_write(rt2x00dev, 36, 0x80); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x89); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1B); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0D); + rt2800_rfcsr_write(rt2x00dev, 41, 0x9B); + rt2800_rfcsr_write(rt2x00dev, 42, 0xD5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x72); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0E); + rt2800_rfcsr_write(rt2x00dev, 45, 0xA2); + rt2800_rfcsr_write(rt2x00dev, 46, 0x6B); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 51, 0x3E); + rt2800_rfcsr_write(rt2x00dev, 52, 0x48); + rt2800_rfcsr_write(rt2x00dev, 54, 0x38); + rt2800_rfcsr_write(rt2x00dev, 56, 0xA1); + rt2800_rfcsr_write(rt2x00dev, 57, 0x00); + rt2800_rfcsr_write(rt2x00dev, 58, 0x39); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0x91); + rt2800_rfcsr_write(rt2x00dev, 62, 0x39); + + /* TODO RF27 <- tssi */ + + rfcsr = rf->channel <= 10 ? 0x07 : 0x06; + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 59, rfcsr); + + if (is_11b) { + /* CCK */ + rt2800_rfcsr_write(rt2x00dev, 31, 0xF8); + rt2800_rfcsr_write(rt2x00dev, 32, 0xC0); + if (is_type_ep) + rt2800_rfcsr_write(rt2x00dev, 55, 0x06); + else + rt2800_rfcsr_write(rt2x00dev, 55, 0x47); + } else { + /* OFDM */ + if (is_type_ep) + rt2800_rfcsr_write(rt2x00dev, 55, 0x03); + else + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + } + + power_bound = POWER_BOUND; + ep_reg = 0x2; + } else { + rt2800_rfcsr_write(rt2x00dev, 10, 0x97); + /* FIMXE: RF11 overwrite */ + rt2800_rfcsr_write(rt2x00dev, 11, 0x40); + rt2800_rfcsr_write(rt2x00dev, 25, 0xBF); + rt2800_rfcsr_write(rt2x00dev, 27, 0x42); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x04); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 40, 0x42); + rt2800_rfcsr_write(rt2x00dev, 41, 0xBB); + rt2800_rfcsr_write(rt2x00dev, 42, 0xD7); + rt2800_rfcsr_write(rt2x00dev, 45, 0x41); + rt2800_rfcsr_write(rt2x00dev, 48, 0x00); + rt2800_rfcsr_write(rt2x00dev, 57, 0x77); + rt2800_rfcsr_write(rt2x00dev, 60, 0x05); + rt2800_rfcsr_write(rt2x00dev, 61, 0x01); + + /* TODO RF27 <- tssi */ + + if (rf->channel >= 36 && rf->channel <= 64) { + + rt2800_rfcsr_write(rt2x00dev, 12, 0x2E); + rt2800_rfcsr_write(rt2x00dev, 13, 0x22); + rt2800_rfcsr_write(rt2x00dev, 22, 0x60); + rt2800_rfcsr_write(rt2x00dev, 23, 0x7F); + if (rf->channel <= 50) + rt2800_rfcsr_write(rt2x00dev, 24, 0x09); + else if (rf->channel >= 52) + rt2800_rfcsr_write(rt2x00dev, 24, 0x07); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1C); + rt2800_rfcsr_write(rt2x00dev, 43, 0x5B); + rt2800_rfcsr_write(rt2x00dev, 44, 0X40); + rt2800_rfcsr_write(rt2x00dev, 46, 0X00); + rt2800_rfcsr_write(rt2x00dev, 51, 0xFE); + rt2800_rfcsr_write(rt2x00dev, 52, 0x0C); + rt2800_rfcsr_write(rt2x00dev, 54, 0xF8); + if (rf->channel <= 50) { + rt2800_rfcsr_write(rt2x00dev, 55, 0x06), + rt2800_rfcsr_write(rt2x00dev, 56, 0xD3); + } else if (rf->channel >= 52) { + rt2800_rfcsr_write(rt2x00dev, 55, 0x04); + rt2800_rfcsr_write(rt2x00dev, 56, 0xBB); + } + + rt2800_rfcsr_write(rt2x00dev, 58, 0x15); + rt2800_rfcsr_write(rt2x00dev, 59, 0x7F); + rt2800_rfcsr_write(rt2x00dev, 62, 0x15); + + } else if (rf->channel >= 100 && rf->channel <= 165) { + + rt2800_rfcsr_write(rt2x00dev, 12, 0x0E); + rt2800_rfcsr_write(rt2x00dev, 13, 0x42); + rt2800_rfcsr_write(rt2x00dev, 22, 0x40); + if (rf->channel <= 153) { + rt2800_rfcsr_write(rt2x00dev, 23, 0x3C); + rt2800_rfcsr_write(rt2x00dev, 24, 0x06); + } else if (rf->channel >= 155) { + rt2800_rfcsr_write(rt2x00dev, 23, 0x38); + rt2800_rfcsr_write(rt2x00dev, 24, 0x05); + } + if (rf->channel <= 138) { + rt2800_rfcsr_write(rt2x00dev, 39, 0x1A); + rt2800_rfcsr_write(rt2x00dev, 43, 0x3B); + rt2800_rfcsr_write(rt2x00dev, 44, 0x20); + rt2800_rfcsr_write(rt2x00dev, 46, 0x18); + } else if (rf->channel >= 140) { + rt2800_rfcsr_write(rt2x00dev, 39, 0x18); + rt2800_rfcsr_write(rt2x00dev, 43, 0x1B); + rt2800_rfcsr_write(rt2x00dev, 44, 0x10); + rt2800_rfcsr_write(rt2x00dev, 46, 0X08); + } + if (rf->channel <= 124) + rt2800_rfcsr_write(rt2x00dev, 51, 0xFC); + else if (rf->channel >= 126) + rt2800_rfcsr_write(rt2x00dev, 51, 0xEC); + if (rf->channel <= 138) + rt2800_rfcsr_write(rt2x00dev, 52, 0x06); + else if (rf->channel >= 140) + rt2800_rfcsr_write(rt2x00dev, 52, 0x06); + rt2800_rfcsr_write(rt2x00dev, 54, 0xEB); + if (rf->channel <= 138) + rt2800_rfcsr_write(rt2x00dev, 55, 0x01); + else if (rf->channel >= 140) + rt2800_rfcsr_write(rt2x00dev, 55, 0x00); + if (rf->channel <= 128) + rt2800_rfcsr_write(rt2x00dev, 56, 0xBB); + else if (rf->channel >= 130) + rt2800_rfcsr_write(rt2x00dev, 56, 0xAB); + if (rf->channel <= 116) + rt2800_rfcsr_write(rt2x00dev, 58, 0x1D); + else if (rf->channel >= 118) + rt2800_rfcsr_write(rt2x00dev, 58, 0x15); + if (rf->channel <= 138) + rt2800_rfcsr_write(rt2x00dev, 59, 0x3F); + else if (rf->channel >= 140) + rt2800_rfcsr_write(rt2x00dev, 59, 0x7C); + if (rf->channel <= 116) + rt2800_rfcsr_write(rt2x00dev, 62, 0x1D); + else if (rf->channel >= 118) + rt2800_rfcsr_write(rt2x00dev, 62, 0x15); + } + + power_bound = POWER_BOUND_5G; + ep_reg = 0x3; + } + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 49); + if (info->default_power1 > power_bound) + rt2x00_set_field8(&rfcsr, RFCSR49_TX, power_bound); + else + rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); + if (is_type_ep) + rt2x00_set_field8(&rfcsr, RFCSR49_EP, ep_reg); + rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 50); + if (info->default_power2 > power_bound) + rt2x00_set_field8(&rfcsr, RFCSR50_TX, power_bound); + else + rt2x00_set_field8(&rfcsr, RFCSR50_TX, info->default_power2); + if (is_type_ep) + rt2x00_set_field8(&rfcsr, RFCSR50_EP, ep_reg); + rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); + + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, + rt2x00dev->default_ant.tx_chain_num >= 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, + rt2x00dev->default_ant.tx_chain_num == 2); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); + + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, + rt2x00dev->default_ant.rx_chain_num >= 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, + rt2x00dev->default_ant.rx_chain_num == 2); + rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); + + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 6, 0xe4); + + if (conf_is_ht40(conf)) + rt2800_rfcsr_write(rt2x00dev, 30, 0x16); + else + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + + if (!is_11b) { + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + } + + /* TODO proper frequency adjustment */ + rt2800_freq_cal_mode1(rt2x00dev); + + /* TODO merge with others */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); + rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); + + /* BBP settings */ + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + + rt2800_bbp_write(rt2x00dev, 79, (rf->channel <= 14) ? 0x1C : 0x18); + rt2800_bbp_write(rt2x00dev, 80, (rf->channel <= 14) ? 0x0E : 0x08); + rt2800_bbp_write(rt2x00dev, 81, (rf->channel <= 14) ? 0x3A : 0x38); + rt2800_bbp_write(rt2x00dev, 82, (rf->channel <= 14) ? 0x62 : 0x92); + + /* GLRT band configuration */ + rt2800_bbp_write(rt2x00dev, 195, 128); + rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0xE0 : 0xF0); + rt2800_bbp_write(rt2x00dev, 195, 129); + rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x1F : 0x1E); + rt2800_bbp_write(rt2x00dev, 195, 130); + rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x38 : 0x28); + rt2800_bbp_write(rt2x00dev, 195, 131); + rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x32 : 0x20); + rt2800_bbp_write(rt2x00dev, 195, 133); + rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x28 : 0x7F); + rt2800_bbp_write(rt2x00dev, 195, 124); + rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F); +} + +static void rt2800_config_channel_rf7620(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 rx_agc_fc, tx_agc_fc; + u8 rfcsr; + + /* Frequeny plan setting */ + /* Rdiv setting (set 0x03 if Xtal==20) + * R13[1:0] + */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 13); + rt2x00_set_field8(&rfcsr, RFCSR13_RDIV_MT7620, + rt2800_clk_is_20mhz(rt2x00dev) ? 3 : 0); + rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); + + /* N setting + * R20[7:0] in rf->rf1 + * R21[0] always 0 + */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 20); + rfcsr = (rf->rf1 & 0x00ff); + rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 21); + rt2x00_set_field8(&rfcsr, RFCSR21_BIT1, 0); + rt2800_rfcsr_write(rt2x00dev, 21, rfcsr); + + /* K setting (always 0) + * R16[3:0] (RF PLL freq selection) + */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 16); + rt2x00_set_field8(&rfcsr, RFCSR16_RF_PLL_FREQ_SEL_MT7620, 0); + rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); + + /* D setting (always 0) + * R22[2:0] (D=15, R22[2:0]=<111>) + */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 22); + rt2x00_set_field8(&rfcsr, RFCSR22_FREQPLAN_D_MT7620, 0); + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* Ksd setting + * Ksd: R17<7:0> in rf->rf2 + * R18<7:0> in rf->rf3 + * R19<1:0> in rf->rf4 + */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 17); + rfcsr = rf->rf2; + rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 18); + rfcsr = rf->rf3; + rt2800_rfcsr_write(rt2x00dev, 18, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 19); + rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4); + rt2800_rfcsr_write(rt2x00dev, 19, rfcsr); + + /* Default: XO=20MHz , SDM mode */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 16); + rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80); + rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 21); + rt2x00_set_field8(&rfcsr, RFCSR21_BIT8, 1); + rt2800_rfcsr_write(rt2x00dev, 21, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620, + rt2x00dev->default_ant.tx_chain_num != 1); + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 2); + rt2x00_set_field8(&rfcsr, RFCSR2_TX2_EN_MT7620, + rt2x00dev->default_ant.tx_chain_num != 1); + rt2x00_set_field8(&rfcsr, RFCSR2_RX2_EN_MT7620, + rt2x00dev->default_ant.rx_chain_num != 1); + rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 42); + rt2x00_set_field8(&rfcsr, RFCSR42_TX2_EN_MT7620, + rt2x00dev->default_ant.tx_chain_num != 1); + rt2800_rfcsr_write(rt2x00dev, 42, rfcsr); + + /* RF for DC Cal BW */ + if (conf_is_ht40(conf)) { + rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10); + rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10); + rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04); + rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10); + rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10); + } else { + rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x20); + rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x20); + rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x20); + rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20); + } + + if (conf_is_ht40(conf)) { + rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x08); + rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x08); + } else { + rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x28); + rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x28); + } + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 28); + rt2x00_set_field8(&rfcsr, RFCSR28_CH11_HT40, + conf_is_ht40(conf) && (rf->channel == 11)); + rt2800_rfcsr_write(rt2x00dev, 28, rfcsr); + + if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) { + if (conf_is_ht40(conf)) { + rx_agc_fc = drv_data->rx_calibration_bw40; + tx_agc_fc = drv_data->tx_calibration_bw40; + } else { + rx_agc_fc = drv_data->rx_calibration_bw20; + tx_agc_fc = drv_data->tx_calibration_bw20; + } + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6); + rfcsr &= (~0x3F); + rfcsr |= rx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr); + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7); + rfcsr &= (~0x3F); + rfcsr |= rx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr); + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 6); + rfcsr &= (~0x3F); + rfcsr |= rx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr); + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 7); + rfcsr &= (~0x3F); + rfcsr |= rx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr); + + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58); + rfcsr &= (~0x3F); + rfcsr |= tx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr); + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59); + rfcsr &= (~0x3F); + rfcsr |= tx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr); + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 58); + rfcsr &= (~0x3F); + rfcsr |= tx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr); + rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 59); + rfcsr &= (~0x3F); + rfcsr |= tx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); + } + + if (conf_is_ht40(conf)) { + rt2800_bbp_glrt_write(rt2x00dev, 141, 0x10); + rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2f); + } else { + rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1a); + rt2800_bbp_glrt_write(rt2x00dev, 157, 0x40); + } +} + +static void rt2800_config_alc_rt6352(struct rt2x00_dev *rt2x00dev, + struct ieee80211_channel *chan, + int power_level) +{ + int cur_channel = rt2x00dev->rf_channel; + u16 eeprom, chan_power, rate_power, target_power; + u16 tx_power[2]; + s8 *power_group[2]; + u32 mac_sys_ctrl; + u32 cnt, reg; + u8 bbp; + + if (WARN_ON(cur_channel < 1 || cur_channel > 14)) + return; + + /* get per chain power, 2 chains in total, unit is 0.5dBm */ + power_level = (power_level - 3) * 2; + + /* We can't get the accurate TX power. Based on some tests, the real + * TX power is approximately equal to channel_power + (max)rate_power. + * Usually max rate_power is the gain of the OFDM 6M rate. The antenna + * gain and externel PA gain are not included as we are unable to + * obtain these values. + */ + rate_power = rt2800_eeprom_read_from_array(rt2x00dev, + EEPROM_TXPOWER_BYRATE, 1); + rate_power &= 0x3f; + power_level -= rate_power; + if (power_level < 1) + power_level = 1; + + power_group[0] = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); + power_group[1] = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); + for (cnt = 0; cnt < 2; cnt++) { + chan_power = power_group[cnt][cur_channel - 1]; + if (chan_power >= 0x20 || chan_power == 0) + chan_power = 0x10; + tx_power[cnt] = power_level < chan_power ? power_level : chan_power; + } + + reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_0); + rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, tx_power[0]); + rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, tx_power[1]); + rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_0, 0x2f); + rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_1, 0x2f); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_INTERNAL_TX_ALC)) { + /* init base power by eeprom target power */ + target_power = rt2800_eeprom_read(rt2x00dev, + EEPROM_TXPOWER_INIT); + rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, target_power); + rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, target_power); + } + rt2800_register_write(rt2x00dev, TX_ALC_CFG_0, reg); + + reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1); + rt2x00_set_field32(®, TX_ALC_CFG_1_TX_TEMP_COMP, 0); + rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); + + /* Save MAC SYS CTRL registers */ + mac_sys_ctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + /* Disable Tx/Rx */ + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + /* Check MAC Tx/Rx idle */ + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) + rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n"); + + if (chan->center_freq > 2457) { + bbp = rt2800_bbp_read(rt2x00dev, 30); + bbp = 0x40; + rt2800_bbp_write(rt2x00dev, 30, bbp); + rt2800_rfcsr_write(rt2x00dev, 39, 0); + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) + rt2800_rfcsr_write(rt2x00dev, 42, 0xfb); + else + rt2800_rfcsr_write(rt2x00dev, 42, 0x7b); + } else { + bbp = rt2800_bbp_read(rt2x00dev, 30); + bbp = 0x1f; + rt2800_bbp_write(rt2x00dev, 30, bbp); + rt2800_rfcsr_write(rt2x00dev, 39, 0x80); + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) + rt2800_rfcsr_write(rt2x00dev, 42, 0xdb); + else + rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); + } + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl); + + rt2800_vco_calibration(rt2x00dev); +} + +static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, + const unsigned int word, + const u8 value) +{ + u8 chain, reg; + + for (chain = 0; chain < rt2x00dev->default_ant.rx_chain_num; chain++) { + reg = rt2800_bbp_read(rt2x00dev, 27); + rt2x00_set_field8(®, BBP27_RX_CHAIN_SEL, chain); + rt2800_bbp_write(rt2x00dev, 27, reg); + + rt2800_bbp_write(rt2x00dev, word, value); + } +} + +static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel) +{ + u8 cal; + + /* TX0 IQ Gain */ + rt2800_bbp_write(rt2x00dev, 158, 0x2c); + if (channel <= 14) + cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G); + else if (channel >= 36 && channel <= 64) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G); + else if (channel >= 100 && channel <= 138) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G); + else if (channel >= 140 && channel <= 165) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G); + else + cal = 0; + rt2800_bbp_write(rt2x00dev, 159, cal); + + /* TX0 IQ Phase */ + rt2800_bbp_write(rt2x00dev, 158, 0x2d); + if (channel <= 14) + cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G); + else if (channel >= 36 && channel <= 64) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G); + else if (channel >= 100 && channel <= 138) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G); + else if (channel >= 140 && channel <= 165) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G); + else + cal = 0; + rt2800_bbp_write(rt2x00dev, 159, cal); + + /* TX1 IQ Gain */ + rt2800_bbp_write(rt2x00dev, 158, 0x4a); + if (channel <= 14) + cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G); + else if (channel >= 36 && channel <= 64) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G); + else if (channel >= 100 && channel <= 138) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G); + else if (channel >= 140 && channel <= 165) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G); + else + cal = 0; + rt2800_bbp_write(rt2x00dev, 159, cal); + + /* TX1 IQ Phase */ + rt2800_bbp_write(rt2x00dev, 158, 0x4b); + if (channel <= 14) + cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G); + else if (channel >= 36 && channel <= 64) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G); + else if (channel >= 100 && channel <= 138) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G); + else if (channel >= 140 && channel <= 165) + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G); + else + cal = 0; + rt2800_bbp_write(rt2x00dev, 159, cal); + + /* FIXME: possible RX0, RX1 callibration ? */ + + /* RF IQ compensation control */ + rt2800_bbp_write(rt2x00dev, 158, 0x04); + cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL); + rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0); + + /* RF IQ imbalance compensation control */ + rt2800_bbp_write(rt2x00dev, 158, 0x03); + cal = rt2x00_eeprom_byte(rt2x00dev, + EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL); + rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0); +} + +static s8 rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev, + unsigned int channel, + s8 txpower) +{ + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC); + + if (channel <= 14) + return clamp_t(s8, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER); + + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + return clamp_t(s8, txpower, MIN_A_TXPOWER_3593, + MAX_A_TXPOWER_3593); + else + return clamp_t(s8, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); +} + +static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev, + struct rf_channel *rf) +{ + u8 bbp; + + bbp = (rf->channel > 14) ? 0x48 : 0x38; + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + + if (rf->channel <= 14) { + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + } else { + /* Disable CCK packet detection */ + rt2800_bbp_write(rt2x00dev, 70, 0x00); + } + + rt2800_bbp_write(rt2x00dev, 73, 0x10); + + if (rf->channel > 14) { + rt2800_bbp_write(rt2x00dev, 62, 0x1d); + rt2800_bbp_write(rt2x00dev, 63, 0x1d); + rt2800_bbp_write(rt2x00dev, 64, 0x1d); + } else { + rt2800_bbp_write(rt2x00dev, 62, 0x2d); + rt2800_bbp_write(rt2x00dev, 63, 0x2d); + rt2800_bbp_write(rt2x00dev, 64, 0x2d); + } +} + +static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u32 reg; + u32 tx_pin; + u8 bbp, rfcsr; + + info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, + info->default_power1); + info->default_power2 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, + info->default_power2); + if (rt2x00dev->default_ant.tx_chain_num > 2) + info->default_power3 = + rt2800_txpower_to_dev(rt2x00dev, rf->channel, + info->default_power3); + + switch (rt2x00dev->chip.rt) { + case RT3883: + rt3883_bbp_adjust(rt2x00dev, rf); + break; + } + + switch (rt2x00dev->chip.rf) { + case RF2020: + case RF3020: + case RF3021: + case RF3022: + case RF3320: + rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info); + break; + case RF3052: + rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info); + break; + case RF3053: + rt2800_config_channel_rf3053(rt2x00dev, conf, rf, info); + break; + case RF3290: + rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info); + break; + case RF3322: + rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); + break; + case RF3853: + rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info); + break; + case RF3070: + case RF5350: + case RF5360: + case RF5362: + case RF5370: + case RF5372: + case RF5390: + case RF5392: + rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info); + break; + case RF5592: + rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info); + break; + case RF7620: + rt2800_config_channel_rf7620(rt2x00dev, conf, rf, info); + break; + default: + rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); + } + + if (rt2x00_rf(rt2x00dev, RF3070) || + rt2x00_rf(rt2x00dev, RF3290) || + rt2x00_rf(rt2x00dev, RF3322) || + rt2x00_rf(rt2x00dev, RF5350) || + rt2x00_rf(rt2x00dev, RF5360) || + rt2x00_rf(rt2x00dev, RF5362) || + rt2x00_rf(rt2x00dev, RF5370) || + rt2x00_rf(rt2x00dev, RF5372) || + rt2x00_rf(rt2x00dev, RF5390) || + rt2x00_rf(rt2x00dev, RF5392)) { + rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); + if (rt2x00_rf(rt2x00dev, RF3322)) { + rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_TX_H20M, + conf_is_ht40(conf)); + rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_RX_H20M, + conf_is_ht40(conf)); + } else { + rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, + conf_is_ht40(conf)); + rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, + conf_is_ht40(conf)); + } + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); + rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); + } + + /* + * Change BBP settings + */ + + if (rt2x00_rt(rt2x00dev, RT3352)) { + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + + rt2800_bbp_write(rt2x00dev, 27, 0x0); + rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 27, 0x20); + rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 86, 0x38); + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + } else if (rt2x00_rt(rt2x00dev, RT3593)) { + if (rf->channel > 14) { + /* Disable CCK Packet detection on 5GHz */ + rt2800_bbp_write(rt2x00dev, 70, 0x00); + } else { + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + } + + if (conf_is_ht40(conf)) + rt2800_bbp_write(rt2x00dev, 105, 0x04); + else + rt2800_bbp_write(rt2x00dev, 105, 0x34); + + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 77, 0x98); + } else if (rt2x00_rt(rt2x00dev, RT3883)) { + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + + if (rt2x00dev->default_ant.rx_chain_num > 1) + rt2800_bbp_write(rt2x00dev, 86, 0x46); + else + rt2800_bbp_write(rt2x00dev, 86, 0); + } else { + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + if (rt2x00_rt(rt2x00dev, RT6352)) + rt2800_bbp_write(rt2x00dev, 86, 0x38); + else + rt2800_bbp_write(rt2x00dev, 86, 0); + } + + if (rf->channel <= 14) { + if (!rt2x00_rt(rt2x00dev, RT5390) && + !rt2x00_rt(rt2x00dev, RT5392) && + !rt2x00_rt(rt2x00dev, RT6352)) { + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + } else { + if (rt2x00_rt(rt2x00dev, RT3593)) + rt2800_bbp_write(rt2x00dev, 82, 0x62); + else + rt2800_bbp_write(rt2x00dev, 82, 0x84); + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + rt2800_bbp_write(rt2x00dev, 83, 0x8a); + } + + } else { + if (rt2x00_rt(rt2x00dev, RT3572)) + rt2800_bbp_write(rt2x00dev, 82, 0x94); + else if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + rt2800_bbp_write(rt2x00dev, 82, 0x82); + else if (!rt2x00_rt(rt2x00dev, RT6352)) + rt2800_bbp_write(rt2x00dev, 82, 0xf2); + + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + rt2800_bbp_write(rt2x00dev, 83, 0x9a); + + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) + rt2800_bbp_write(rt2x00dev, 75, 0x46); + else + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + + reg = rt2800_register_read(rt2x00dev, TX_BAND_CFG); + rt2x00_set_field32(®, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf)); + rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); + rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); + rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); + + if (rt2x00_rt(rt2x00dev, RT3572)) + rt2800_rfcsr_write(rt2x00dev, 8, 0); + + if (rt2x00_rt(rt2x00dev, RT6352)) { + tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFRX_EN, 1); + } else { + tx_pin = 0; + } + + switch (rt2x00dev->default_ant.tx_chain_num) { + case 3: + /* Turn on tertiary PAs */ + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, + rf->channel > 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, + rf->channel <= 14); + fallthrough; + case 2: + /* Turn on secondary PAs */ + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, + rf->channel > 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, + rf->channel <= 14); + fallthrough; + case 1: + /* Turn on primary PAs */ + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, + rf->channel > 14); + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); + else + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, + rf->channel <= 14); + break; + } + + switch (rt2x00dev->default_ant.rx_chain_num) { + case 3: + /* Turn on tertiary LNAs */ + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1); + fallthrough; + case 2: + /* Turn on secondary LNAs */ + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); + fallthrough; + case 1: + /* Turn on primary LNAs */ + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); + break; + } + + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); + + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + + if (rt2x00_rt(rt2x00dev, RT3572)) { + rt2800_rfcsr_write(rt2x00dev, 8, 0x80); + + /* AGC init */ + if (rf->channel <= 14) + reg = 0x1c + (2 * rt2x00dev->lna_gain); + else + reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3); + + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); + } + + if (rt2x00_rt(rt2x00dev, RT3593)) { + reg = rt2800_register_read(rt2x00dev, GPIO_CTRL); + + /* Band selection */ + if (rt2x00_is_usb(rt2x00dev) || + rt2x00_is_pcie(rt2x00dev)) { + /* GPIO #8 controls all paths */ + rt2x00_set_field32(®, GPIO_CTRL_DIR8, 0); + if (rf->channel <= 14) + rt2x00_set_field32(®, GPIO_CTRL_VAL8, 1); + else + rt2x00_set_field32(®, GPIO_CTRL_VAL8, 0); + } + + /* LNA PE control. */ + if (rt2x00_is_usb(rt2x00dev)) { + /* GPIO #4 controls PE0 and PE1, + * GPIO #7 controls PE2 + */ + rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); + rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0); + + rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); + rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1); + } else if (rt2x00_is_pcie(rt2x00dev)) { + /* GPIO #4 controls PE0, PE1 and PE2 */ + rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); + rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); + } + + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + + /* AGC init */ + if (rf->channel <= 14) + reg = 0x1c + 2 * rt2x00dev->lna_gain; + else + reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3); + + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); + + usleep_range(1000, 1500); + } + + if (rt2x00_rt(rt2x00dev, RT3883)) { + if (!conf_is_ht40(conf)) + rt2800_bbp_write(rt2x00dev, 105, 0x34); + else + rt2800_bbp_write(rt2x00dev, 105, 0x04); + + /* AGC init */ + if (rf->channel <= 14) + reg = 0x2e + rt2x00dev->lna_gain; + else + reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3); + + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); + + usleep_range(1000, 1500); + } + + if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) { + reg = 0x10; + if (!conf_is_ht40(conf)) { + if (rt2x00_rt(rt2x00dev, RT6352) && + rt2x00_has_cap_external_lna_bg(rt2x00dev)) { + reg |= 0x5; + } else { + reg |= 0xa; + } + } + rt2800_bbp_write(rt2x00dev, 195, 141); + rt2800_bbp_write(rt2x00dev, 196, reg); + + /* AGC init. + * Despite the vendor driver using different values here for + * RT6352 chip, we use 0x1c for now. This may have to be changed + * once TSSI got implemented. + */ + reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain; + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); + + if (rt2x00_rt(rt2x00dev, RT5592)) + rt2800_iq_calibrate(rt2x00dev, rf->channel); + } + + if (rt2x00_rt(rt2x00dev, RT6352)) { + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, + &rt2x00dev->cap_flags)) { + reg = rt2800_register_read(rt2x00dev, RF_CONTROL3); + reg |= 0x00000101; + rt2800_register_write(rt2x00dev, RF_CONTROL3, reg); + + reg = rt2800_register_read(rt2x00dev, RF_BYPASS3); + reg |= 0x00000101; + rt2800_register_write(rt2x00dev, RF_BYPASS3, reg); + + rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0x73); + rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0x73); + rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0x73); + rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27); + rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0xC8); + rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xA4); + rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x05); + rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27); + rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xC8); + rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xA4); + rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x05); + rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x27); + rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0xC8); + rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xA4); + rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x05); + rt2800_rfcsr_write_dccal(rt2x00dev, 05, 0x00); + + rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT, + 0x36303636); + rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, + 0x6C6C6B6C); + rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, + 0x6C6C6B6C); + } + } + + bbp = rt2800_bbp_read(rt2x00dev, 4); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + bbp = rt2800_bbp_read(rt2x00dev, 3); + rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf)); + rt2800_bbp_write(rt2x00dev, 3, bbp); + + if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { + if (conf_is_ht40(conf)) { + rt2800_bbp_write(rt2x00dev, 69, 0x1a); + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 73, 0x16); + } else { + rt2800_bbp_write(rt2x00dev, 69, 0x16); + rt2800_bbp_write(rt2x00dev, 70, 0x08); + rt2800_bbp_write(rt2x00dev, 73, 0x11); + } + } + + usleep_range(1000, 1500); + + /* + * Clear channel statistic counters + */ + reg = rt2800_register_read(rt2x00dev, CH_IDLE_STA); + reg = rt2800_register_read(rt2x00dev, CH_BUSY_STA); + reg = rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC); + + /* + * Clear update flag + */ + if (rt2x00_rt(rt2x00dev, RT3352) || + rt2x00_rt(rt2x00dev, RT5350)) { + bbp = rt2800_bbp_read(rt2x00dev, 49); + rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0); + rt2800_bbp_write(rt2x00dev, 49, bbp); + } +} + +static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) +{ + u8 tssi_bounds[9]; + u8 current_tssi; + u16 eeprom; + u8 step; + int i; + + /* + * First check if temperature compensation is supported. + */ + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + if (!rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC)) + return 0; + + /* + * Read TSSI boundaries for temperature compensation from + * the EEPROM. + * + * Array idx 0 1 2 3 4 5 6 7 8 + * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4 + * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00 + */ + if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1); + tssi_bounds[0] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG1_MINUS4); + tssi_bounds[1] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG1_MINUS3); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2); + tssi_bounds[2] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG2_MINUS2); + tssi_bounds[3] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG2_MINUS1); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3); + tssi_bounds[4] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG3_REF); + tssi_bounds[5] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG3_PLUS1); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4); + tssi_bounds[6] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG4_PLUS2); + tssi_bounds[7] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG4_PLUS3); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5); + tssi_bounds[8] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG5_PLUS4); + + step = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG5_AGC_STEP); + } else { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1); + tssi_bounds[0] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A1_MINUS4); + tssi_bounds[1] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A1_MINUS3); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2); + tssi_bounds[2] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A2_MINUS2); + tssi_bounds[3] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A2_MINUS1); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3); + tssi_bounds[4] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A3_REF); + tssi_bounds[5] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A3_PLUS1); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4); + tssi_bounds[6] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A4_PLUS2); + tssi_bounds[7] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A4_PLUS3); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5); + tssi_bounds[8] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A5_PLUS4); + + step = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A5_AGC_STEP); + } + + /* + * Check if temperature compensation is supported. + */ + if (tssi_bounds[4] == 0xff || step == 0xff) + return 0; + + /* + * Read current TSSI (BBP 49). + */ + current_tssi = rt2800_bbp_read(rt2x00dev, 49); + + /* + * Compare TSSI value (BBP49) with the compensation boundaries + * from the EEPROM and increase or decrease tx power. + */ + for (i = 0; i <= 3; i++) { + if (current_tssi > tssi_bounds[i]) + break; + } + + if (i == 4) { + for (i = 8; i >= 5; i--) { + if (current_tssi < tssi_bounds[i]) + break; + } + } + + return (i - 4) * step; +} + +static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev, + enum nl80211_band band) +{ + u16 eeprom; + u8 comp_en; + u8 comp_type; + int comp_value = 0; + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA); + + /* + * HT40 compensation not required. + */ + if (eeprom == 0xffff || + !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + return 0; + + if (band == NL80211_BAND_2GHZ) { + comp_en = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_DELTA_ENABLE_2G); + if (comp_en) { + comp_type = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_DELTA_TYPE_2G); + comp_value = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_DELTA_VALUE_2G); + if (!comp_type) + comp_value = -comp_value; + } + } else { + comp_en = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_DELTA_ENABLE_5G); + if (comp_en) { + comp_type = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_DELTA_TYPE_5G); + comp_value = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_DELTA_VALUE_5G); + if (!comp_type) + comp_value = -comp_value; + } + } + + return comp_value; +} + +static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev, + int power_level, int max_power) +{ + int delta; + + if (rt2x00_has_cap_power_limit(rt2x00dev)) + return 0; + + /* + * XXX: We don't know the maximum transmit power of our hardware since + * the EEPROM doesn't expose it. We only know that we are calibrated + * to 100% tx power. + * + * Hence, we assume the regulatory limit that cfg80211 calulated for + * the current channel is our maximum and if we are requested to lower + * the value we just reduce our tx power accordingly. + */ + delta = power_level - max_power; + return min(delta, 0); +} + +static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b, + enum nl80211_band band, int power_level, + u8 txpower, int delta) +{ + u16 eeprom; + u8 criterion; + u8 eirp_txpower; + u8 eirp_txpower_criterion; + u8 reg_limit; + + if (rt2x00_rt(rt2x00dev, RT3593)) + return min_t(u8, txpower, 0xc); + + if (rt2x00_rt(rt2x00dev, RT3883)) + return min_t(u8, txpower, 0xf); + + if (rt2x00_has_cap_power_limit(rt2x00dev)) { + /* + * Check if eirp txpower exceed txpower_limit. + * We use OFDM 6M as criterion and its eirp txpower + * is stored at EEPROM_EIRP_MAX_TX_POWER. + * .11b data rate need add additional 4dbm + * when calculating eirp txpower. + */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, + EEPROM_TXPOWER_BYRATE, + 1); + criterion = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE0); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER); + + if (band == NL80211_BAND_2GHZ) + eirp_txpower_criterion = rt2x00_get_field16(eeprom, + EEPROM_EIRP_MAX_TX_POWER_2GHZ); + else + eirp_txpower_criterion = rt2x00_get_field16(eeprom, + EEPROM_EIRP_MAX_TX_POWER_5GHZ); + + eirp_txpower = eirp_txpower_criterion + (txpower - criterion) + + (is_rate_b ? 4 : 0) + delta; + + reg_limit = (eirp_txpower > power_level) ? + (eirp_txpower - power_level) : 0; + } else + reg_limit = 0; + + txpower = max(0, txpower + delta - reg_limit); + return min_t(u8, txpower, 0xc); +} + + +enum { + TX_PWR_CFG_0_IDX, + TX_PWR_CFG_1_IDX, + TX_PWR_CFG_2_IDX, + TX_PWR_CFG_3_IDX, + TX_PWR_CFG_4_IDX, + TX_PWR_CFG_5_IDX, + TX_PWR_CFG_6_IDX, + TX_PWR_CFG_7_IDX, + TX_PWR_CFG_8_IDX, + TX_PWR_CFG_9_IDX, + TX_PWR_CFG_0_EXT_IDX, + TX_PWR_CFG_1_EXT_IDX, + TX_PWR_CFG_2_EXT_IDX, + TX_PWR_CFG_3_EXT_IDX, + TX_PWR_CFG_4_EXT_IDX, + TX_PWR_CFG_IDX_COUNT, +}; + +static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev, + struct ieee80211_channel *chan, + int power_level) +{ + u8 txpower; + u16 eeprom; + u32 regs[TX_PWR_CFG_IDX_COUNT]; + unsigned int offset; + enum nl80211_band band = chan->band; + int delta; + int i; + + memset(regs, '\0', sizeof(regs)); + + /* TODO: adapt TX power reduction from the rt28xx code */ + + /* calculate temperature compensation delta */ + delta = rt2800_get_gain_calibration_delta(rt2x00dev); + + if (band == NL80211_BAND_5GHZ) + offset = 16; + else + offset = 0; + + if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + offset += 8; + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset); + + /* CCK 1MBS,2MBS */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_CCK1_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_CCK1_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], + TX_PWR_CFG_0_EXT_CCK1_CH2, txpower); + + /* CCK 5.5MBS,11MBS */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_CCK5_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_CCK5_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], + TX_PWR_CFG_0_EXT_CCK5_CH2, txpower); + + /* OFDM 6MBS,9MBS */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_OFDM6_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_OFDM6_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], + TX_PWR_CFG_0_EXT_OFDM6_CH2, txpower); + + /* OFDM 12MBS,18MBS */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_OFDM12_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], + TX_PWR_CFG_0_OFDM12_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], + TX_PWR_CFG_0_EXT_OFDM12_CH2, txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset + 1); + + /* OFDM 24MBS,36MBS */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_OFDM24_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_OFDM24_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], + TX_PWR_CFG_1_EXT_OFDM24_CH2, txpower); + + /* OFDM 48MBS */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_OFDM48_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_OFDM48_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], + TX_PWR_CFG_1_EXT_OFDM48_CH2, txpower); + + /* OFDM 54MBS */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], + TX_PWR_CFG_7_OFDM54_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], + TX_PWR_CFG_7_OFDM54_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], + TX_PWR_CFG_7_OFDM54_CH2, txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset + 2); + + /* MCS 0,1 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_MCS0_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_MCS0_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], + TX_PWR_CFG_1_EXT_MCS0_CH2, txpower); + + /* MCS 2,3 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_MCS2_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], + TX_PWR_CFG_1_MCS2_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], + TX_PWR_CFG_1_EXT_MCS2_CH2, txpower); + + /* MCS 4,5 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS4_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS4_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], + TX_PWR_CFG_2_EXT_MCS4_CH2, txpower); + + /* MCS 6 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS6_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS6_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], + TX_PWR_CFG_2_EXT_MCS6_CH2, txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset + 3); + + /* MCS 7 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], + TX_PWR_CFG_7_MCS7_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], + TX_PWR_CFG_7_MCS7_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], + TX_PWR_CFG_7_MCS7_CH2, txpower); + + /* MCS 8,9 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS8_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS8_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], + TX_PWR_CFG_2_EXT_MCS8_CH2, txpower); + + /* MCS 10,11 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS10_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], + TX_PWR_CFG_2_MCS10_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], + TX_PWR_CFG_2_EXT_MCS10_CH2, txpower); + + /* MCS 12,13 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_MCS12_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_MCS12_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], + TX_PWR_CFG_3_EXT_MCS12_CH2, txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset + 4); + + /* MCS 14 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_MCS14_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_MCS14_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], + TX_PWR_CFG_3_EXT_MCS14_CH2, txpower); + + /* MCS 15 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], + TX_PWR_CFG_8_MCS15_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], + TX_PWR_CFG_8_MCS15_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], + TX_PWR_CFG_8_MCS15_CH2, txpower); + + /* MCS 16,17 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], + TX_PWR_CFG_5_MCS16_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], + TX_PWR_CFG_5_MCS16_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], + TX_PWR_CFG_5_MCS16_CH2, txpower); + + /* MCS 18,19 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], + TX_PWR_CFG_5_MCS18_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], + TX_PWR_CFG_5_MCS18_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], + TX_PWR_CFG_5_MCS18_CH2, txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset + 5); + + /* MCS 20,21 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], + TX_PWR_CFG_6_MCS20_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], + TX_PWR_CFG_6_MCS20_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], + TX_PWR_CFG_6_MCS20_CH2, txpower); + + /* MCS 22 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], + TX_PWR_CFG_6_MCS22_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], + TX_PWR_CFG_6_MCS22_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], + TX_PWR_CFG_6_MCS22_CH2, txpower); + + /* MCS 23 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], + TX_PWR_CFG_8_MCS23_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], + TX_PWR_CFG_8_MCS23_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], + TX_PWR_CFG_8_MCS23_CH2, txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset + 6); + + /* STBC, MCS 0,1 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_STBC0_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_STBC0_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], + TX_PWR_CFG_3_EXT_STBC0_CH2, txpower); + + /* STBC, MCS 2,3 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_STBC2_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], + TX_PWR_CFG_3_STBC2_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], + TX_PWR_CFG_3_EXT_STBC2_CH2, txpower); + + /* STBC, MCS 4,5 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE0, + txpower); + + /* STBC, MCS 6 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE2, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE3, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE2, + txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, + offset + 7); + + /* STBC, MCS 7 */ + txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, + txpower, delta); + rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX], + TX_PWR_CFG_9_STBC7_CH0, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX], + TX_PWR_CFG_9_STBC7_CH1, txpower); + rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX], + TX_PWR_CFG_9_STBC7_CH2, txpower); + + rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, regs[TX_PWR_CFG_0_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, regs[TX_PWR_CFG_1_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, regs[TX_PWR_CFG_2_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, regs[TX_PWR_CFG_3_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, regs[TX_PWR_CFG_4_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_5, regs[TX_PWR_CFG_5_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_6, regs[TX_PWR_CFG_6_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, regs[TX_PWR_CFG_7_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, regs[TX_PWR_CFG_8_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, regs[TX_PWR_CFG_9_IDX]); + + rt2800_register_write(rt2x00dev, TX_PWR_CFG_0_EXT, + regs[TX_PWR_CFG_0_EXT_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_1_EXT, + regs[TX_PWR_CFG_1_EXT_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_2_EXT, + regs[TX_PWR_CFG_2_EXT_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_3_EXT, + regs[TX_PWR_CFG_3_EXT_IDX]); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_4_EXT, + regs[TX_PWR_CFG_4_EXT_IDX]); + + for (i = 0; i < TX_PWR_CFG_IDX_COUNT; i++) + rt2x00_dbg(rt2x00dev, + "band:%cGHz, BW:%c0MHz, TX_PWR_CFG_%d%s = %08lx\n", + (band == NL80211_BAND_5GHZ) ? '5' : '2', + (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ? + '4' : '2', + (i > TX_PWR_CFG_9_IDX) ? + (i - TX_PWR_CFG_9_IDX - 1) : i, + (i > TX_PWR_CFG_9_IDX) ? "_EXT" : "", + (unsigned long) regs[i]); +} + +static void rt2800_config_txpower_rt6352(struct rt2x00_dev *rt2x00dev, + struct ieee80211_channel *chan, + int power_level) +{ + u32 reg, pwreg; + u16 eeprom; + u32 data, gdata; + u8 t, i; + enum nl80211_band band = chan->band; + int delta; + + /* Warn user if bw_comp is set in EEPROM */ + delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); + + if (delta) + rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n", + delta); + + /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT20, limit + * value to 0x3f and replace 0x20 by 0x21 as this is what the vendor + * driver does as well, though it looks kinda wrong. + * Maybe some misunderstanding of what a signed 8-bit value is? Maybe + * the hardware has a problem handling 0x20, and as the code initially + * used a fixed offset between HT20 and HT40 rates they had to work- + * around that issue and most likely just forgot about it later on. + * Maybe we should use rt2800_get_txpower_bw_comp() here as well, + * however, the corresponding EEPROM value is not respected by the + * vendor driver, so maybe this is rather being taken care of the + * TXALC and the driver doesn't need to handle it...? + * Though this is all very awkward, just do as they did, as that's what + * board vendors expected when they populated the EEPROM... + */ + for (i = 0; i < 5; i++) { + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, + EEPROM_TXPOWER_BYRATE, + i * 2); + + data = eeprom; + + t = eeprom & 0x3f; + if (t == 32) + t++; + + gdata = t; + + t = (eeprom & 0x3f00) >> 8; + if (t == 32) + t++; + + gdata |= (t << 8); + + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, + EEPROM_TXPOWER_BYRATE, + (i * 2) + 1); + + t = eeprom & 0x3f; + if (t == 32) + t++; + + gdata |= (t << 16); + + t = (eeprom & 0x3f00) >> 8; + if (t == 32) + t++; + + gdata |= (t << 24); + data |= (eeprom << 16); + + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) { + /* HT20 */ + if (data != 0xffffffff) + rt2800_register_write(rt2x00dev, + TX_PWR_CFG_0 + (i * 4), + data); + } else { + /* HT40 */ + if (gdata != 0xffffffff) + rt2800_register_write(rt2x00dev, + TX_PWR_CFG_0 + (i * 4), + gdata); + } + } + + /* Aparently Ralink ran out of space in the BYRATE calibration section + * of the EERPOM which is copied to the corresponding TX_PWR_CFG_x + * registers. As recent 2T chips use 8-bit instead of 4-bit values for + * power-offsets more space would be needed. Ralink decided to keep the + * EEPROM layout untouched and rather have some shared values covering + * multiple bitrates. + * Populate the registers not covered by the EEPROM in the same way the + * vendor driver does. + */ + + /* For OFDM 54MBS use value from OFDM 48MBS */ + pwreg = 0; + reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_1); + t = rt2x00_get_field32(reg, TX_PWR_CFG_1B_48MBS); + rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_54MBS, t); + + /* For MCS 7 use value from MCS 6 */ + reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_2); + t = rt2x00_get_field32(reg, TX_PWR_CFG_2B_MCS6_MCS7); + rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_MCS7, t); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, pwreg); + + /* For MCS 15 use value from MCS 14 */ + pwreg = 0; + reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_3); + t = rt2x00_get_field32(reg, TX_PWR_CFG_3B_MCS14); + rt2x00_set_field32(&pwreg, TX_PWR_CFG_8B_MCS15, t); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, pwreg); + + /* For STBC MCS 7 use value from STBC MCS 6 */ + pwreg = 0; + reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_4); + t = rt2x00_get_field32(reg, TX_PWR_CFG_4B_STBC_MCS6); + rt2x00_set_field32(&pwreg, TX_PWR_CFG_9B_STBC_MCS7, t); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, pwreg); + + rt2800_config_alc_rt6352(rt2x00dev, chan, power_level); + + /* TODO: temperature compensation code! */ +} + +/* + * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and + * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values, + * 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power + * for all rates, but allow to set only 4 discrete values: -12, -6, 0 and 6 dBm. + * Reference per rate transmit power values are located in the EEPROM at + * EEPROM_TXPOWER_BYRATE offset. We adjust them and BBP R1 settings according to + * current conditions (i.e. band, bandwidth, temperature, user settings). + */ +static void rt2800_config_txpower_rt28xx(struct rt2x00_dev *rt2x00dev, + struct ieee80211_channel *chan, + int power_level) +{ + u8 txpower, r1; + u16 eeprom; + u32 reg, offset; + int i, is_rate_b, delta, power_ctrl; + enum nl80211_band band = chan->band; + + /* + * Calculate HT40 compensation. For 40MHz we need to add or subtract + * value read from EEPROM (different for 2GHz and for 5GHz). + */ + delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); + + /* + * Calculate temperature compensation. Depends on measurement of current + * TSSI (Transmitter Signal Strength Indication) we know TX power (due + * to temperature or maybe other factors) is smaller or bigger than + * expected. We adjust it, based on TSSI reference and boundaries values + * provided in EEPROM. + */ + switch (rt2x00dev->chip.rt) { + case RT2860: + case RT2872: + case RT2883: + case RT3070: + case RT3071: + case RT3090: + case RT3572: + delta += rt2800_get_gain_calibration_delta(rt2x00dev); + break; + default: + /* TODO: temperature compensation code for other chips. */ + break; + } + + /* + * Decrease power according to user settings, on devices with unknown + * maximum tx power. For other devices we take user power_level into + * consideration on rt2800_compensate_txpower(). + */ + delta += rt2800_get_txpower_reg_delta(rt2x00dev, power_level, + chan->max_power); + + /* + * BBP_R1 controls TX power for all rates, it allow to set the following + * gains -12, -6, 0, +6 dBm by setting values 2, 1, 0, 3 respectively. + * + * TODO: we do not use +6 dBm option to do not increase power beyond + * regulatory limit, however this could be utilized for devices with + * CAPABILITY_POWER_LIMIT. + */ + if (delta <= -12) { + power_ctrl = 2; + delta += 12; + } else if (delta <= -6) { + power_ctrl = 1; + delta += 6; + } else { + power_ctrl = 0; + } + r1 = rt2800_bbp_read(rt2x00dev, 1); + rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl); + rt2800_bbp_write(rt2x00dev, 1, r1); + + offset = TX_PWR_CFG_0; + + for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) { + /* just to be safe */ + if (offset > TX_PWR_CFG_4) + break; + + reg = rt2800_register_read(rt2x00dev, offset); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, + EEPROM_TXPOWER_BYRATE, + i); + + is_rate_b = i ? 0 : 1; + /* + * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS, + * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE0, txpower); + + /* + * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS, + * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE1, txpower); + + /* + * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS, + * TX_PWR_CFG_2: MCS6, TX_PWR_CFG_3: MCS14, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE2, txpower); + + /* + * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS, + * TX_PWR_CFG_2: MCS7, TX_PWR_CFG_3: MCS15, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE3); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE3, txpower); + + /* read the next four txpower values */ + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, + EEPROM_TXPOWER_BYRATE, + i + 1); + + is_rate_b = 0; + /* + * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0, + * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE0); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE4, txpower); + + /* + * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1, + * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE1); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE5, txpower); + + /* + * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2, + * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE2); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE6, txpower); + + /* + * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3, + * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown, + * TX_PWR_CFG_4: unknown + */ + txpower = rt2x00_get_field16(eeprom, + EEPROM_TXPOWER_BYRATE_RATE3); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); + rt2x00_set_field32(®, TX_PWR_CFG_RATE7, txpower); + + rt2800_register_write(rt2x00dev, offset, reg); + + /* next TX_PWR_CFG register */ + offset += 4; + } +} + +static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, + struct ieee80211_channel *chan, + int power_level) +{ + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level); + else if (rt2x00_rt(rt2x00dev, RT6352)) + rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level); + else + rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level); +} + +void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev) +{ + rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan, + rt2x00dev->tx_power); +} +EXPORT_SYMBOL_GPL(rt2800_gain_calibration); + +void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev) +{ + u32 tx_pin; + u8 rfcsr; + unsigned long min_sleep = 0; + + /* + * A voltage-controlled oscillator(VCO) is an electronic oscillator + * designed to be controlled in oscillation frequency by a voltage + * input. Maybe the temperature will affect the frequency of + * oscillation to be shifted. The VCO calibration will be called + * periodically to adjust the frequency to be precision. + */ + + tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG); + tx_pin &= TX_PIN_CFG_PA_PE_DISABLE; + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + + switch (rt2x00dev->chip.rf) { + case RF2020: + case RF3020: + case RF3021: + case RF3022: + case RF3320: + case RF3052: + rfcsr = rt2800_rfcsr_read(rt2x00dev, 7); + rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); + rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); + break; + case RF3053: + case RF3070: + case RF3290: + case RF3853: + case RF5350: + case RF5360: + case RF5362: + case RF5370: + case RF5372: + case RF5390: + case RF5392: + case RF5592: + rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); + rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); + min_sleep = 1000; + break; + case RF7620: + rt2800_rfcsr_write(rt2x00dev, 5, 0x40); + rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); + rfcsr = rt2800_rfcsr_read(rt2x00dev, 4); + rt2x00_set_field8(&rfcsr, RFCSR4_VCOCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 4, rfcsr); + min_sleep = 2000; + break; + default: + WARN_ONCE(1, "Not supported RF chipset %x for VCO recalibration", + rt2x00dev->chip.rf); + return; + } + + if (min_sleep > 0) + usleep_range(min_sleep, min_sleep * 2); + + tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG); + if (rt2x00dev->rf_channel <= 14) { + switch (rt2x00dev->default_ant.tx_chain_num) { + case 3: + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1); + fallthrough; + case 2: + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); + fallthrough; + case 1: + default: + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); + break; + } + } else { + switch (rt2x00dev->default_ant.tx_chain_num) { + case 3: + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1); + fallthrough; + case 2: + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); + fallthrough; + case 1: + default: + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); + break; + } + } + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + + if (rt2x00_rt(rt2x00dev, RT6352)) { + if (rt2x00dev->default_ant.rx_chain_num == 1) { + rt2800_bbp_write(rt2x00dev, 91, 0x07); + rt2800_bbp_write(rt2x00dev, 95, 0x1A); + rt2800_bbp_write(rt2x00dev, 195, 128); + rt2800_bbp_write(rt2x00dev, 196, 0xA0); + rt2800_bbp_write(rt2x00dev, 195, 170); + rt2800_bbp_write(rt2x00dev, 196, 0x12); + rt2800_bbp_write(rt2x00dev, 195, 171); + rt2800_bbp_write(rt2x00dev, 196, 0x10); + } else { + rt2800_bbp_write(rt2x00dev, 91, 0x06); + rt2800_bbp_write(rt2x00dev, 95, 0x9A); + rt2800_bbp_write(rt2x00dev, 195, 128); + rt2800_bbp_write(rt2x00dev, 196, 0xE0); + rt2800_bbp_write(rt2x00dev, 195, 170); + rt2800_bbp_write(rt2x00dev, 196, 0x30); + rt2800_bbp_write(rt2x00dev, 195, 171); + rt2800_bbp_write(rt2x00dev, 196, 0x30); + } + + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { + rt2800_bbp_write(rt2x00dev, 75, 0x68); + rt2800_bbp_write(rt2x00dev, 76, 0x4C); + rt2800_bbp_write(rt2x00dev, 79, 0x1C); + rt2800_bbp_write(rt2x00dev, 80, 0x0C); + rt2800_bbp_write(rt2x00dev, 82, 0xB6); + } + + /* On 11A, We should delay and wait RF/BBP to be stable + * and the appropriate time should be 1000 micro seconds + * 2005/06/05 - On 11G, we also need this delay time. + * Otherwise it's difficult to pass the WHQL. + */ + usleep_range(1000, 1500); + } +} +EXPORT_SYMBOL_GPL(rt2800_vco_calibration); + +static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; + + reg = rt2800_register_read(rt2x00dev, TX_RTY_CFG); + rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, + libconf->conf->short_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, + libconf->conf->long_frame_max_tx_count); + rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); +} + +static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); + + reg = rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, + libconf->conf->listen_interval - 1); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + } else { + reg = rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + } +} + +void rt2800_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) +{ + /* Always recalculate LNA gain before changing configuration */ + rt2800_config_lna_gain(rt2x00dev, libconf); + + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) { + /* + * To provide correct survey data for survey-based ACS algorithm + * we have to save survey data for current channel before switching. + */ + rt2800_update_survey(rt2x00dev); + + rt2800_config_channel(rt2x00dev, libconf->conf, + &libconf->rf, &libconf->channel); + rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan, + libconf->conf->power_level); + } + if (flags & IEEE80211_CONF_CHANGE_POWER) + rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan, + libconf->conf->power_level); + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2800_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2800_config_ps(rt2x00dev, libconf); +} +EXPORT_SYMBOL_GPL(rt2800_config); + +/* + * Link tuning + */ +void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + reg = rt2800_register_read(rt2x00dev, RX_STA_CNT0); + qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); +} +EXPORT_SYMBOL_GPL(rt2800_link_stats); + +static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) +{ + u8 vgc; + + if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) { + if (rt2x00_rt(rt2x00dev, RT3070) || + rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3090) || + rt2x00_rt(rt2x00dev, RT3290) || + rt2x00_rt(rt2x00dev, RT3390) || + rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT5390) || + rt2x00_rt(rt2x00dev, RT5392) || + rt2x00_rt(rt2x00dev, RT5592) || + rt2x00_rt(rt2x00dev, RT6352)) + vgc = 0x1c + (2 * rt2x00dev->lna_gain); + else + vgc = 0x2e + rt2x00dev->lna_gain; + } else { /* 5GHZ band */ + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; + else if (rt2x00_rt(rt2x00dev, RT5592)) + vgc = 0x24 + (2 * rt2x00dev->lna_gain); + else { + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + vgc = 0x32 + (rt2x00dev->lna_gain * 5) / 3; + else + vgc = 0x3a + (rt2x00dev->lna_gain * 5) / 3; + } + } + + return vgc; +} + +static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) +{ + if (qual->vgc_level != vgc_level) { + if (rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883) || + rt2x00_rt(rt2x00dev, RT6352)) { + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, + vgc_level); + } else if (rt2x00_rt(rt2x00dev, RT5592)) { + rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a); + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level); + } else { + rt2800_bbp_write(rt2x00dev, 66, vgc_level); + } + + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } +} + +void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev)); +} +EXPORT_SYMBOL_GPL(rt2800_reset_tuner); + +void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, + const u32 count) +{ + u8 vgc; + + if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) + return; + + /* When RSSI is better than a certain threshold, increase VGC + * with a chip specific value in order to improve the balance + * between sensibility and noise isolation. + */ + + vgc = rt2800_get_default_vgc(rt2x00dev); + + switch (rt2x00dev->chip.rt) { + case RT3572: + case RT3593: + if (qual->rssi > -65) { + if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) + vgc += 0x20; + else + vgc += 0x10; + } + break; + + case RT3883: + if (qual->rssi > -65) + vgc += 0x10; + break; + + case RT5592: + if (qual->rssi > -65) + vgc += 0x20; + break; + + default: + if (qual->rssi > -80) + vgc += 0x10; + break; + } + + rt2800_set_vgc(rt2x00dev, qual, vgc); +} +EXPORT_SYMBOL_GPL(rt2800_link_tuner); + +/* + * Initialization functions. + */ +static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u32 reg; + u16 eeprom; + unsigned int i; + int ret; + + rt2800_disable_wpdma(rt2x00dev); + + ret = rt2800_drv_init_registers(rt2x00dev); + if (ret) + return ret; + + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 1600); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + rt2800_config_filter(rt2x00dev, FIF_ALLMULTI); + + reg = rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, 9); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); + rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + + if (rt2x00_rt(rt2x00dev, RT3290)) { + reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL); + if (rt2x00_get_field32(reg, WLAN_EN) == 1) { + rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + } + + reg = rt2800_register_read(rt2x00dev, CMB_CTRL); + if (!(rt2x00_get_field32(reg, LDO0_EN) == 1)) { + rt2x00_set_field32(®, LDO0_EN, 1); + rt2x00_set_field32(®, LDO_BGSEL, 3); + rt2800_register_write(rt2x00dev, CMB_CTRL, reg); + } + + reg = rt2800_register_read(rt2x00dev, OSC_CTRL); + rt2x00_set_field32(®, OSC_ROSC_EN, 1); + rt2x00_set_field32(®, OSC_CAL_REQ, 1); + rt2x00_set_field32(®, OSC_REF_CYCLE, 0x27); + rt2800_register_write(rt2x00dev, OSC_CTRL, reg); + + reg = rt2800_register_read(rt2x00dev, COEX_CFG0); + rt2x00_set_field32(®, COEX_CFG_ANT, 0x5e); + rt2800_register_write(rt2x00dev, COEX_CFG0, reg); + + reg = rt2800_register_read(rt2x00dev, COEX_CFG2); + rt2x00_set_field32(®, BT_COEX_CFG1, 0x00); + rt2x00_set_field32(®, BT_COEX_CFG0, 0x17); + rt2x00_set_field32(®, WL_COEX_CFG1, 0x93); + rt2x00_set_field32(®, WL_COEX_CFG0, 0x7f); + rt2800_register_write(rt2x00dev, COEX_CFG2, reg); + + reg = rt2800_register_read(rt2x00dev, PLL_CTRL); + rt2x00_set_field32(®, PLL_CONTROL, 1); + rt2800_register_write(rt2x00dev, PLL_CTRL, reg); + } + + if (rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3090) || + rt2x00_rt(rt2x00dev, RT3290) || + rt2x00_rt(rt2x00dev, RT3390)) { + + if (rt2x00_rt(rt2x00dev, RT3290)) + rt2800_register_write(rt2x00dev, TX_SW_CFG0, + 0x00000404); + else + rt2800_register_write(rt2x00dev, TX_SW_CFG0, + 0x00000400); + + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || + rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || + rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST)) + rt2800_register_write(rt2x00dev, TX_SW_CFG2, + 0x0000002c); + else + rt2800_register_write(rt2x00dev, TX_SW_CFG2, + 0x0000000f); + } else { + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } + } else if (rt2x00_rt(rt2x00dev, RT3070)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); + + if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c); + } else { + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } + } else if (rt2800_is_305x_soc(rt2x00dev)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030); + } else if (rt2x00_rt(rt2x00dev, RT3352)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } else if (rt2x00_rt(rt2x00dev, RT3572)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + } else if (rt2x00_rt(rt2x00dev, RT3593)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + if (rt2x00_rt_rev_lt(rt2x00dev, RT3593, REV_RT3593E)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + if (rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF1_DAC_TEST)) + rt2800_register_write(rt2x00dev, TX_SW_CFG2, + 0x0000001f); + else + rt2800_register_write(rt2x00dev, TX_SW_CFG2, + 0x0000000f); + } else { + rt2800_register_write(rt2x00dev, TX_SW_CFG2, + 0x00000000); + } + } else if (rt2x00_rt(rt2x00dev, RT3883)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000); + rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21); + rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40); + } else if (rt2x00_rt(rt2x00dev, RT5390) || + rt2x00_rt(rt2x00dev, RT5392)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } else if (rt2x00_rt(rt2x00dev, RT5592)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } else if (rt2x00_rt(rt2x00dev, RT5350)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); + } else if (rt2x00_rt(rt2x00dev, RT6352)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000); + rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0); + rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0); + rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, 0x6C6C666C); + rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, 0x6C6C666C); + rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT, + 0x3630363A); + rt2800_register_write(rt2x00dev, TX1_RF_GAIN_CORRECT, + 0x3630363A); + reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1); + rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0); + rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); + } else { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + } + + reg = rt2800_register_read(rt2x00dev, TX_LINK_CFG); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); + rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); + rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); + rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, MAX_LEN_CFG); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); + if (rt2x00_is_usb(rt2x00dev)) { + drv_data->max_psdu = 3; + } else if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) || + rt2x00_rt(rt2x00dev, RT2883) || + rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E)) { + drv_data->max_psdu = 2; + } else { + drv_data->max_psdu = 1; + } + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, drv_data->max_psdu); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 10); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 10); + rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, LED_CFG); + rt2x00_set_field32(®, LED_CFG_ON_PERIOD, 70); + rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, 30); + rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); + rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); + rt2800_register_write(rt2x00dev, LED_CFG, reg); + + rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); + + reg = rt2800_register_read(rt2x00dev, TX_RTY_CFG); + rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, 2); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, 2); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); + rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); + rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, AUTO_RSP_CFG); + rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); + rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, 1); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 1); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, CCK_PROT_CFG); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 3); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV_SHORT, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1); + rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 3); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV_SHORT, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV_SHORT, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 0); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV_SHORT, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 0); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 0); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV_SHORT, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 0); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV_SHORT, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 0); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 0); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + if (rt2x00_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006); + + reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + } + + /* + * The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1 + * although it is reserved. + */ + reg = rt2800_register_read(rt2x00dev, TXOP_CTRL_CFG); + rt2x00_set_field32(®, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN, 1); + rt2x00_set_field32(®, TXOP_CTRL_CFG_AC_TRUN_EN, 1); + rt2x00_set_field32(®, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN, 1); + rt2x00_set_field32(®, TXOP_CTRL_CFG_USER_MODE_TRUN_EN, 1); + rt2x00_set_field32(®, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN, 1); + rt2x00_set_field32(®, TXOP_CTRL_CFG_RESERVED_TRUN_EN, 1); + rt2x00_set_field32(®, TXOP_CTRL_CFG_LSIG_TXOP_EN, 0); + rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CCA_EN, 0); + rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CCA_DLY, 88); + rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CWMIN, 0); + rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg); + + reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002; + rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg); + + if (rt2x00_rt(rt2x00dev, RT3883)) { + rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008); + rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413); + } + + reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG); + rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, + IEEE80211_MAX_RTS_THRESHOLD); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 1); + rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); + + /* + * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS + * time should be set to 16. However, the original Ralink driver uses + * 16 for both and indeed using a value of 10 for CCK SIFS results in + * connection problems with 11g + CTS protection. Hence, use the same + * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS. + */ + reg = rt2800_register_read(rt2x00dev, XIFS_TIME_CFG); + rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); + rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, 314); + rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); + rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); + + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + + /* + * ASIC will keep garbage value after boot, clear encryption keys. + */ + for (i = 0; i < 4; i++) + rt2800_register_write(rt2x00dev, SHARED_KEY_MODE_ENTRY(i), 0); + + for (i = 0; i < 256; i++) { + rt2800_config_wcid(rt2x00dev, NULL, i); + rt2800_delete_wcid_attr(rt2x00dev, i); + } + + /* + * Clear encryption initialization vectors on start, but keep them + * for watchdog reset. Otherwise we will have wrong IVs and not be + * able to keep connections after reset. + */ + if (!test_bit(DEVICE_STATE_RESET, &rt2x00dev->flags)) + for (i = 0; i < 256; i++) + rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); + + /* + * Clear all beacons + */ + for (i = 0; i < 8; i++) + rt2800_clear_beacon_register(rt2x00dev, i); + + if (rt2x00_is_usb(rt2x00dev)) { + reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); + rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 30); + rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); + } else if (rt2x00_is_pcie(rt2x00dev)) { + reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); + rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125); + rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); + } else if (rt2x00_is_soc(rt2x00dev)) { + struct clk *clk = clk_get_sys("bus", NULL); + int rate; + + if (IS_ERR(clk)) { + clk = clk_get_sys("cpu", NULL); + + if (IS_ERR(clk)) { + rate = 125; + } else { + rate = clk_get_rate(clk) / 3000000; + clk_put(clk); + } + } else { + rate = clk_get_rate(clk) / 1000000; + clk_put(clk); + } + + reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); + rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate); + rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); + } + + reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); + rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg); + + reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG1); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); + rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg); + + reg = rt2800_register_read(rt2x00dev, LG_FBK_CFG0); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); + rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg); + + reg = rt2800_register_read(rt2x00dev, LG_FBK_CFG1); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); + rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg); + + /* + * Do not force the BA window size, we use the TXWI to set it + */ + reg = rt2800_register_read(rt2x00dev, AMPDU_BA_WINSIZE); + rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE, 0); + rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE, 0); + rt2800_register_write(rt2x00dev, AMPDU_BA_WINSIZE, reg); + + /* + * We must clear the error counters. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + reg = rt2800_register_read(rt2x00dev, RX_STA_CNT0); + reg = rt2800_register_read(rt2x00dev, RX_STA_CNT1); + reg = rt2800_register_read(rt2x00dev, RX_STA_CNT2); + reg = rt2800_register_read(rt2x00dev, TX_STA_CNT0); + reg = rt2800_register_read(rt2x00dev, TX_STA_CNT1); + reg = rt2800_register_read(rt2x00dev, TX_STA_CNT2); + + /* + * Setup leadtime for pre tbtt interrupt to 6ms + */ + reg = rt2800_register_read(rt2x00dev, INT_TIMER_CFG); + rt2x00_set_field32(®, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4); + rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg); + + /* + * Set up channel statistics timer + */ + reg = rt2800_register_read(rt2x00dev, CH_TIME_CFG); + rt2x00_set_field32(®, CH_TIME_CFG_EIFS_BUSY, 1); + rt2x00_set_field32(®, CH_TIME_CFG_NAV_BUSY, 1); + rt2x00_set_field32(®, CH_TIME_CFG_RX_BUSY, 1); + rt2x00_set_field32(®, CH_TIME_CFG_TX_BUSY, 1); + rt2x00_set_field32(®, CH_TIME_CFG_TMR_EN, 1); + rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg); + + return 0; +} + + +static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev) +{ + u8 value; + + value = rt2800_bbp_read(rt2x00dev, 4); + rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1); + rt2800_bbp_write(rt2x00dev, 4, value); +} + +static void rt2800_init_freq_calibration(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 142, 1); + rt2800_bbp_write(rt2x00dev, 143, 57); +} + +static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev) +{ + static const u8 glrt_table[] = { + 0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */ + 0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */ + 0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */ + 0X3C, 0x34, 0x2C, 0x2F, 0x3C, 0x35, 0x2E, 0x2A, 0x49, 0x41, /* 158 ~ 167 */ + 0x36, 0x31, 0x30, 0x30, 0x0E, 0x0D, 0x28, 0x21, 0x1C, 0x16, /* 168 ~ 177 */ + 0x50, 0x4A, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, /* 178 ~ 187 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 188 ~ 197 */ + 0x00, 0x00, 0x7D, 0x14, 0x32, 0x2C, 0x36, 0x4C, 0x43, 0x2C, /* 198 ~ 207 */ + 0x2E, 0x36, 0x30, 0x6E, /* 208 ~ 211 */ + }; + int i; + + for (i = 0; i < ARRAY_SIZE(glrt_table); i++) { + rt2800_bbp_write(rt2x00dev, 195, 128 + i); + rt2800_bbp_write(rt2x00dev, 196, glrt_table[i]); + } +}; + +static void rt2800_init_bbp_early(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 65, 0x2C); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + rt2800_bbp_write(rt2x00dev, 68, 0x0B); + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + rt2800_bbp_write(rt2x00dev, 81, 0x37); + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 83, 0x6A); + rt2800_bbp_write(rt2x00dev, 84, 0x99); + rt2800_bbp_write(rt2x00dev, 86, 0x00); + rt2800_bbp_write(rt2x00dev, 91, 0x04); + rt2800_bbp_write(rt2x00dev, 92, 0x00); + rt2800_bbp_write(rt2x00dev, 103, 0x00); + rt2800_bbp_write(rt2x00dev, 105, 0x05); + rt2800_bbp_write(rt2x00dev, 106, 0x35); +} + +static void rt2800_disable_unused_dac_adc(struct rt2x00_dev *rt2x00dev) +{ + u16 eeprom; + u8 value; + + value = rt2800_bbp_read(rt2x00dev, 138); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) + value |= 0x20; + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) + value &= ~0x02; + rt2800_bbp_write(rt2x00dev, 138, value); +} + +static void rt2800_init_bbp_305x_soc(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 31, 0x08); + + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 78, 0x0e); + rt2800_bbp_write(rt2x00dev, 80, 0x08); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + + rt2800_bbp_write(rt2x00dev, 84, 0x99); + + rt2800_bbp_write(rt2x00dev, 86, 0x00); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x00); + + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_bbp_write(rt2x00dev, 105, 0x01); + + rt2800_bbp_write(rt2x00dev, 106, 0x35); +} + +static void rt2800_init_bbp_28xx(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { + rt2800_bbp_write(rt2x00dev, 69, 0x16); + rt2800_bbp_write(rt2x00dev, 73, 0x12); + } else { + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + } + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 81, 0x37); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + + if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D)) + rt2800_bbp_write(rt2x00dev, 84, 0x19); + else + rt2800_bbp_write(rt2x00dev, 84, 0x99); + + rt2800_bbp_write(rt2x00dev, 86, 0x00); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x00); + + rt2800_bbp_write(rt2x00dev, 103, 0x00); + + rt2800_bbp_write(rt2x00dev, 105, 0x05); + + rt2800_bbp_write(rt2x00dev, 106, 0x35); +} + +static void rt2800_init_bbp_30xx(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 79, 0x13); + rt2800_bbp_write(rt2x00dev, 80, 0x05); + rt2800_bbp_write(rt2x00dev, 81, 0x33); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + + rt2800_bbp_write(rt2x00dev, 84, 0x99); + + rt2800_bbp_write(rt2x00dev, 86, 0x00); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x00); + + if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) || + rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) || + rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E)) + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + else + rt2800_bbp_write(rt2x00dev, 103, 0x00); + + rt2800_bbp_write(rt2x00dev, 105, 0x05); + + rt2800_bbp_write(rt2x00dev, 106, 0x35); + + if (rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3090)) + rt2800_disable_unused_dac_adc(rt2x00dev); +} + +static void rt2800_init_bbp_3290(struct rt2x00_dev *rt2x00dev) +{ + u8 value; + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + rt2800_bbp_write(rt2x00dev, 31, 0x08); + + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + rt2800_bbp_write(rt2x00dev, 68, 0x0b); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x13); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + rt2800_bbp_write(rt2x00dev, 76, 0x28); + + rt2800_bbp_write(rt2x00dev, 77, 0x58); + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 74, 0x0b); + rt2800_bbp_write(rt2x00dev, 79, 0x18); + rt2800_bbp_write(rt2x00dev, 80, 0x09); + rt2800_bbp_write(rt2x00dev, 81, 0x33); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + rt2800_bbp_write(rt2x00dev, 83, 0x7a); + + rt2800_bbp_write(rt2x00dev, 84, 0x9a); + + rt2800_bbp_write(rt2x00dev, 86, 0x38); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x02); + + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_bbp_write(rt2x00dev, 104, 0x92); + + rt2800_bbp_write(rt2x00dev, 105, 0x1c); + + rt2800_bbp_write(rt2x00dev, 106, 0x03); + + rt2800_bbp_write(rt2x00dev, 128, 0x12); + + rt2800_bbp_write(rt2x00dev, 67, 0x24); + rt2800_bbp_write(rt2x00dev, 143, 0x04); + rt2800_bbp_write(rt2x00dev, 142, 0x99); + rt2800_bbp_write(rt2x00dev, 150, 0x30); + rt2800_bbp_write(rt2x00dev, 151, 0x2e); + rt2800_bbp_write(rt2x00dev, 152, 0x20); + rt2800_bbp_write(rt2x00dev, 153, 0x34); + rt2800_bbp_write(rt2x00dev, 154, 0x40); + rt2800_bbp_write(rt2x00dev, 155, 0x3b); + rt2800_bbp_write(rt2x00dev, 253, 0x04); + + value = rt2800_bbp_read(rt2x00dev, 47); + rt2x00_set_field8(&value, BBP47_TSSI_ADC6, 1); + rt2800_bbp_write(rt2x00dev, 47, value); + + /* Use 5-bit ADC for Acquisition and 8-bit ADC for data */ + value = rt2800_bbp_read(rt2x00dev, 3); + rt2x00_set_field8(&value, BBP3_ADC_MODE_SWITCH, 1); + rt2x00_set_field8(&value, BBP3_ADC_INIT_MODE, 1); + rt2800_bbp_write(rt2x00dev, 3, value); +} + +static void rt2800_init_bbp_3352(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 3, 0x00); + rt2800_bbp_write(rt2x00dev, 4, 0x50); + + rt2800_bbp_write(rt2x00dev, 31, 0x08); + + rt2800_bbp_write(rt2x00dev, 47, 0x48); + + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + rt2800_bbp_write(rt2x00dev, 68, 0x0b); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x13); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + rt2800_bbp_write(rt2x00dev, 76, 0x28); + + rt2800_bbp_write(rt2x00dev, 77, 0x59); + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 78, 0x0e); + rt2800_bbp_write(rt2x00dev, 80, 0x08); + rt2800_bbp_write(rt2x00dev, 81, 0x37); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + if (rt2x00_rt(rt2x00dev, RT5350)) { + rt2800_bbp_write(rt2x00dev, 83, 0x7a); + rt2800_bbp_write(rt2x00dev, 84, 0x9a); + } else { + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + rt2800_bbp_write(rt2x00dev, 84, 0x99); + } + + rt2800_bbp_write(rt2x00dev, 86, 0x38); + + rt2800_bbp_write(rt2x00dev, 88, 0x90); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x02); + + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_bbp_write(rt2x00dev, 104, 0x92); + + if (rt2x00_rt(rt2x00dev, RT5350)) { + rt2800_bbp_write(rt2x00dev, 105, 0x3c); + rt2800_bbp_write(rt2x00dev, 106, 0x03); + } else { + rt2800_bbp_write(rt2x00dev, 105, 0x34); + rt2800_bbp_write(rt2x00dev, 106, 0x05); + } + + rt2800_bbp_write(rt2x00dev, 120, 0x50); + + rt2800_bbp_write(rt2x00dev, 137, 0x0f); + + rt2800_bbp_write(rt2x00dev, 163, 0xbd); + /* Set ITxBF timeout to 0x9c40=1000msec */ + rt2800_bbp_write(rt2x00dev, 179, 0x02); + rt2800_bbp_write(rt2x00dev, 180, 0x00); + rt2800_bbp_write(rt2x00dev, 182, 0x40); + rt2800_bbp_write(rt2x00dev, 180, 0x01); + rt2800_bbp_write(rt2x00dev, 182, 0x9c); + rt2800_bbp_write(rt2x00dev, 179, 0x00); + /* Reprogram the inband interface to put right values in RXWI */ + rt2800_bbp_write(rt2x00dev, 142, 0x04); + rt2800_bbp_write(rt2x00dev, 143, 0x3b); + rt2800_bbp_write(rt2x00dev, 142, 0x06); + rt2800_bbp_write(rt2x00dev, 143, 0xa0); + rt2800_bbp_write(rt2x00dev, 142, 0x07); + rt2800_bbp_write(rt2x00dev, 143, 0xa1); + rt2800_bbp_write(rt2x00dev, 142, 0x08); + rt2800_bbp_write(rt2x00dev, 143, 0xa2); + + rt2800_bbp_write(rt2x00dev, 148, 0xc8); + + if (rt2x00_rt(rt2x00dev, RT5350)) { + /* Antenna Software OFDM */ + rt2800_bbp_write(rt2x00dev, 150, 0x40); + /* Antenna Software CCK */ + rt2800_bbp_write(rt2x00dev, 151, 0x30); + rt2800_bbp_write(rt2x00dev, 152, 0xa3); + /* Clear previously selected antenna */ + rt2800_bbp_write(rt2x00dev, 154, 0); + } +} + +static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 79, 0x13); + rt2800_bbp_write(rt2x00dev, 80, 0x05); + rt2800_bbp_write(rt2x00dev, 81, 0x33); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + + rt2800_bbp_write(rt2x00dev, 84, 0x99); + + rt2800_bbp_write(rt2x00dev, 86, 0x00); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x00); + + if (rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E)) + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + else + rt2800_bbp_write(rt2x00dev, 103, 0x00); + + rt2800_bbp_write(rt2x00dev, 105, 0x05); + + rt2800_bbp_write(rt2x00dev, 106, 0x35); + + rt2800_disable_unused_dac_adc(rt2x00dev); +} + +static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 31, 0x08); + + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 79, 0x13); + rt2800_bbp_write(rt2x00dev, 80, 0x05); + rt2800_bbp_write(rt2x00dev, 81, 0x33); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + + rt2800_bbp_write(rt2x00dev, 84, 0x99); + + rt2800_bbp_write(rt2x00dev, 86, 0x00); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x00); + + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_bbp_write(rt2x00dev, 105, 0x05); + + rt2800_bbp_write(rt2x00dev, 106, 0x35); + + rt2800_disable_unused_dac_adc(rt2x00dev); +} + +static void rt2800_init_bbp_3593(struct rt2x00_dev *rt2x00dev) +{ + rt2800_init_bbp_early(rt2x00dev); + + rt2800_bbp_write(rt2x00dev, 79, 0x13); + rt2800_bbp_write(rt2x00dev, 80, 0x05); + rt2800_bbp_write(rt2x00dev, 81, 0x33); + rt2800_bbp_write(rt2x00dev, 137, 0x0f); + + rt2800_bbp_write(rt2x00dev, 84, 0x19); + + /* Enable DC filter */ + if (rt2x00_rt_rev_gte(rt2x00dev, RT3593, REV_RT3593E)) + rt2800_bbp_write(rt2x00dev, 103, 0xc0); +} + +static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev) +{ + rt2800_init_bbp_early(rt2x00dev); + + rt2800_bbp_write(rt2x00dev, 4, 0x50); + rt2800_bbp_write(rt2x00dev, 47, 0x48); + + rt2800_bbp_write(rt2x00dev, 86, 0x46); + rt2800_bbp_write(rt2x00dev, 88, 0x90); + + rt2800_bbp_write(rt2x00dev, 92, 0x02); + + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + rt2800_bbp_write(rt2x00dev, 104, 0x92); + rt2800_bbp_write(rt2x00dev, 105, 0x34); + rt2800_bbp_write(rt2x00dev, 106, 0x12); + rt2800_bbp_write(rt2x00dev, 120, 0x50); + rt2800_bbp_write(rt2x00dev, 137, 0x0f); + rt2800_bbp_write(rt2x00dev, 163, 0x9d); + + /* Set ITxBF timeout to 0x9C40=1000msec */ + rt2800_bbp_write(rt2x00dev, 179, 0x02); + rt2800_bbp_write(rt2x00dev, 180, 0x00); + rt2800_bbp_write(rt2x00dev, 182, 0x40); + rt2800_bbp_write(rt2x00dev, 180, 0x01); + rt2800_bbp_write(rt2x00dev, 182, 0x9c); + + rt2800_bbp_write(rt2x00dev, 179, 0x00); + + /* Reprogram the inband interface to put right values in RXWI */ + rt2800_bbp_write(rt2x00dev, 142, 0x04); + rt2800_bbp_write(rt2x00dev, 143, 0x3b); + rt2800_bbp_write(rt2x00dev, 142, 0x06); + rt2800_bbp_write(rt2x00dev, 143, 0xa0); + rt2800_bbp_write(rt2x00dev, 142, 0x07); + rt2800_bbp_write(rt2x00dev, 143, 0xa1); + rt2800_bbp_write(rt2x00dev, 142, 0x08); + rt2800_bbp_write(rt2x00dev, 143, 0xa2); + rt2800_bbp_write(rt2x00dev, 148, 0xc8); +} + +static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) +{ + int ant, div_mode; + u16 eeprom; + u8 value; + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + rt2800_bbp_write(rt2x00dev, 31, 0x08); + + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + + rt2800_bbp_write(rt2x00dev, 68, 0x0b); + + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 73, 0x13); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + rt2800_bbp_write(rt2x00dev, 76, 0x28); + + rt2800_bbp_write(rt2x00dev, 77, 0x59); + + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + + rt2800_bbp_write(rt2x00dev, 79, 0x13); + rt2800_bbp_write(rt2x00dev, 80, 0x05); + rt2800_bbp_write(rt2x00dev, 81, 0x33); + + rt2800_bbp_write(rt2x00dev, 82, 0x62); + + rt2800_bbp_write(rt2x00dev, 83, 0x7a); + + rt2800_bbp_write(rt2x00dev, 84, 0x9a); + + rt2800_bbp_write(rt2x00dev, 86, 0x38); + + if (rt2x00_rt(rt2x00dev, RT5392)) + rt2800_bbp_write(rt2x00dev, 88, 0x90); + + rt2800_bbp_write(rt2x00dev, 91, 0x04); + + rt2800_bbp_write(rt2x00dev, 92, 0x02); + + if (rt2x00_rt(rt2x00dev, RT5392)) { + rt2800_bbp_write(rt2x00dev, 95, 0x9a); + rt2800_bbp_write(rt2x00dev, 98, 0x12); + } + + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_bbp_write(rt2x00dev, 104, 0x92); + + rt2800_bbp_write(rt2x00dev, 105, 0x3c); + + if (rt2x00_rt(rt2x00dev, RT5390)) + rt2800_bbp_write(rt2x00dev, 106, 0x03); + else if (rt2x00_rt(rt2x00dev, RT5392)) + rt2800_bbp_write(rt2x00dev, 106, 0x12); + else + WARN_ON(1); + + rt2800_bbp_write(rt2x00dev, 128, 0x12); + + if (rt2x00_rt(rt2x00dev, RT5392)) { + rt2800_bbp_write(rt2x00dev, 134, 0xd0); + rt2800_bbp_write(rt2x00dev, 135, 0xf6); + } + + rt2800_disable_unused_dac_adc(rt2x00dev); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + div_mode = rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF1_ANT_DIVERSITY); + ant = (div_mode == 3) ? 1 : 0; + + /* check if this is a Bluetooth combo card */ + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { + u32 reg; + + reg = rt2800_register_read(rt2x00dev, GPIO_CTRL); + rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0); + rt2x00_set_field32(®, GPIO_CTRL_DIR6, 0); + rt2x00_set_field32(®, GPIO_CTRL_VAL3, 0); + rt2x00_set_field32(®, GPIO_CTRL_VAL6, 0); + if (ant == 0) + rt2x00_set_field32(®, GPIO_CTRL_VAL3, 1); + else if (ant == 1) + rt2x00_set_field32(®, GPIO_CTRL_VAL6, 1); + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + } + + /* These chips have hardware RX antenna diversity */ + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R) || + rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5370G)) { + rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */ + rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */ + rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */ + } + + value = rt2800_bbp_read(rt2x00dev, 152); + if (ant == 0) + rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1); + else + rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0); + rt2800_bbp_write(rt2x00dev, 152, value); + + rt2800_init_freq_calibration(rt2x00dev); +} + +static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev) +{ + int ant, div_mode; + u16 eeprom; + u8 value; + + rt2800_init_bbp_early(rt2x00dev); + + value = rt2800_bbp_read(rt2x00dev, 105); + rt2x00_set_field8(&value, BBP105_MLD, + rt2x00dev->default_ant.rx_chain_num == 2); + rt2800_bbp_write(rt2x00dev, 105, value); + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + rt2800_bbp_write(rt2x00dev, 20, 0x06); + rt2800_bbp_write(rt2x00dev, 31, 0x08); + rt2800_bbp_write(rt2x00dev, 65, 0x2C); + rt2800_bbp_write(rt2x00dev, 68, 0xDD); + rt2800_bbp_write(rt2x00dev, 69, 0x1A); + rt2800_bbp_write(rt2x00dev, 70, 0x05); + rt2800_bbp_write(rt2x00dev, 73, 0x13); + rt2800_bbp_write(rt2x00dev, 74, 0x0F); + rt2800_bbp_write(rt2x00dev, 75, 0x4F); + rt2800_bbp_write(rt2x00dev, 76, 0x28); + rt2800_bbp_write(rt2x00dev, 77, 0x59); + rt2800_bbp_write(rt2x00dev, 84, 0x9A); + rt2800_bbp_write(rt2x00dev, 86, 0x38); + rt2800_bbp_write(rt2x00dev, 88, 0x90); + rt2800_bbp_write(rt2x00dev, 91, 0x04); + rt2800_bbp_write(rt2x00dev, 92, 0x02); + rt2800_bbp_write(rt2x00dev, 95, 0x9a); + rt2800_bbp_write(rt2x00dev, 98, 0x12); + rt2800_bbp_write(rt2x00dev, 103, 0xC0); + rt2800_bbp_write(rt2x00dev, 104, 0x92); + /* FIXME BBP105 owerwrite */ + rt2800_bbp_write(rt2x00dev, 105, 0x3C); + rt2800_bbp_write(rt2x00dev, 106, 0x35); + rt2800_bbp_write(rt2x00dev, 128, 0x12); + rt2800_bbp_write(rt2x00dev, 134, 0xD0); + rt2800_bbp_write(rt2x00dev, 135, 0xF6); + rt2800_bbp_write(rt2x00dev, 137, 0x0F); + + /* Initialize GLRT (Generalized Likehood Radio Test) */ + rt2800_init_bbp_5592_glrt(rt2x00dev); + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + div_mode = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_ANT_DIVERSITY); + ant = (div_mode == 3) ? 1 : 0; + value = rt2800_bbp_read(rt2x00dev, 152); + if (ant == 0) { + /* Main antenna */ + rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1); + } else { + /* Auxiliary antenna */ + rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0); + } + rt2800_bbp_write(rt2x00dev, 152, value); + + if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) { + value = rt2800_bbp_read(rt2x00dev, 254); + rt2x00_set_field8(&value, BBP254_BIT7, 1); + rt2800_bbp_write(rt2x00dev, 254, value); + } + + rt2800_init_freq_calibration(rt2x00dev); + + rt2800_bbp_write(rt2x00dev, 84, 0x19); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) + rt2800_bbp_write(rt2x00dev, 103, 0xc0); +} + +static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev) +{ + u8 bbp; + + /* Apply Maximum Likelihood Detection (MLD) for 2 stream case */ + bbp = rt2800_bbp_read(rt2x00dev, 105); + rt2x00_set_field8(&bbp, BBP105_MLD, + rt2x00dev->default_ant.rx_chain_num == 2); + rt2800_bbp_write(rt2x00dev, 105, bbp); + + /* Avoid data loss and CRC errors */ + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + /* Fix I/Q swap issue */ + bbp = rt2800_bbp_read(rt2x00dev, 1); + bbp |= 0x04; + rt2800_bbp_write(rt2x00dev, 1, bbp); + + /* BBP for G band */ + rt2800_bbp_write(rt2x00dev, 3, 0x08); + rt2800_bbp_write(rt2x00dev, 4, 0x00); /* rt2800_bbp4_mac_if_ctrl? */ + rt2800_bbp_write(rt2x00dev, 6, 0x08); + rt2800_bbp_write(rt2x00dev, 14, 0x09); + rt2800_bbp_write(rt2x00dev, 15, 0xFF); + rt2800_bbp_write(rt2x00dev, 16, 0x01); + rt2800_bbp_write(rt2x00dev, 20, 0x06); + rt2800_bbp_write(rt2x00dev, 21, 0x00); + rt2800_bbp_write(rt2x00dev, 22, 0x00); + rt2800_bbp_write(rt2x00dev, 27, 0x00); + rt2800_bbp_write(rt2x00dev, 28, 0x00); + rt2800_bbp_write(rt2x00dev, 30, 0x00); + rt2800_bbp_write(rt2x00dev, 31, 0x48); + rt2800_bbp_write(rt2x00dev, 47, 0x40); + rt2800_bbp_write(rt2x00dev, 62, 0x00); + rt2800_bbp_write(rt2x00dev, 63, 0x00); + rt2800_bbp_write(rt2x00dev, 64, 0x00); + rt2800_bbp_write(rt2x00dev, 65, 0x2C); + rt2800_bbp_write(rt2x00dev, 66, 0x1C); + rt2800_bbp_write(rt2x00dev, 67, 0x20); + rt2800_bbp_write(rt2x00dev, 68, 0xDD); + rt2800_bbp_write(rt2x00dev, 69, 0x10); + rt2800_bbp_write(rt2x00dev, 70, 0x05); + rt2800_bbp_write(rt2x00dev, 73, 0x18); + rt2800_bbp_write(rt2x00dev, 74, 0x0F); + rt2800_bbp_write(rt2x00dev, 75, 0x60); + rt2800_bbp_write(rt2x00dev, 76, 0x44); + rt2800_bbp_write(rt2x00dev, 77, 0x59); + rt2800_bbp_write(rt2x00dev, 78, 0x1E); + rt2800_bbp_write(rt2x00dev, 79, 0x1C); + rt2800_bbp_write(rt2x00dev, 80, 0x0C); + rt2800_bbp_write(rt2x00dev, 81, 0x3A); + rt2800_bbp_write(rt2x00dev, 82, 0xB6); + rt2800_bbp_write(rt2x00dev, 83, 0x9A); + rt2800_bbp_write(rt2x00dev, 84, 0x9A); + rt2800_bbp_write(rt2x00dev, 86, 0x38); + rt2800_bbp_write(rt2x00dev, 88, 0x90); + rt2800_bbp_write(rt2x00dev, 91, 0x04); + rt2800_bbp_write(rt2x00dev, 92, 0x02); + rt2800_bbp_write(rt2x00dev, 95, 0x9A); + rt2800_bbp_write(rt2x00dev, 96, 0x00); + rt2800_bbp_write(rt2x00dev, 103, 0xC0); + rt2800_bbp_write(rt2x00dev, 104, 0x92); + /* FIXME BBP105 owerwrite */ + rt2800_bbp_write(rt2x00dev, 105, 0x3C); + rt2800_bbp_write(rt2x00dev, 106, 0x12); + rt2800_bbp_write(rt2x00dev, 109, 0x00); + rt2800_bbp_write(rt2x00dev, 134, 0x10); + rt2800_bbp_write(rt2x00dev, 135, 0xA6); + rt2800_bbp_write(rt2x00dev, 137, 0x04); + rt2800_bbp_write(rt2x00dev, 142, 0x30); + rt2800_bbp_write(rt2x00dev, 143, 0xF7); + rt2800_bbp_write(rt2x00dev, 160, 0xEC); + rt2800_bbp_write(rt2x00dev, 161, 0xC4); + rt2800_bbp_write(rt2x00dev, 162, 0x77); + rt2800_bbp_write(rt2x00dev, 163, 0xF9); + rt2800_bbp_write(rt2x00dev, 164, 0x00); + rt2800_bbp_write(rt2x00dev, 165, 0x00); + rt2800_bbp_write(rt2x00dev, 186, 0x00); + rt2800_bbp_write(rt2x00dev, 187, 0x00); + rt2800_bbp_write(rt2x00dev, 188, 0x00); + rt2800_bbp_write(rt2x00dev, 186, 0x00); + rt2800_bbp_write(rt2x00dev, 187, 0x01); + rt2800_bbp_write(rt2x00dev, 188, 0x00); + rt2800_bbp_write(rt2x00dev, 189, 0x00); + + rt2800_bbp_write(rt2x00dev, 91, 0x06); + rt2800_bbp_write(rt2x00dev, 92, 0x04); + rt2800_bbp_write(rt2x00dev, 93, 0x54); + rt2800_bbp_write(rt2x00dev, 99, 0x50); + rt2800_bbp_write(rt2x00dev, 148, 0x84); + rt2800_bbp_write(rt2x00dev, 167, 0x80); + rt2800_bbp_write(rt2x00dev, 178, 0xFF); + rt2800_bbp_write(rt2x00dev, 106, 0x13); + + /* BBP for G band GLRT function (BBP_128 ~ BBP_221) */ + rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00); + rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14); + rt2800_bbp_glrt_write(rt2x00dev, 2, 0x20); + rt2800_bbp_glrt_write(rt2x00dev, 3, 0x0A); + rt2800_bbp_glrt_write(rt2x00dev, 10, 0x16); + rt2800_bbp_glrt_write(rt2x00dev, 11, 0x06); + rt2800_bbp_glrt_write(rt2x00dev, 12, 0x02); + rt2800_bbp_glrt_write(rt2x00dev, 13, 0x07); + rt2800_bbp_glrt_write(rt2x00dev, 14, 0x05); + rt2800_bbp_glrt_write(rt2x00dev, 15, 0x09); + rt2800_bbp_glrt_write(rt2x00dev, 16, 0x20); + rt2800_bbp_glrt_write(rt2x00dev, 17, 0x08); + rt2800_bbp_glrt_write(rt2x00dev, 18, 0x4A); + rt2800_bbp_glrt_write(rt2x00dev, 19, 0x00); + rt2800_bbp_glrt_write(rt2x00dev, 20, 0x00); + rt2800_bbp_glrt_write(rt2x00dev, 128, 0xE0); + rt2800_bbp_glrt_write(rt2x00dev, 129, 0x1F); + rt2800_bbp_glrt_write(rt2x00dev, 130, 0x4F); + rt2800_bbp_glrt_write(rt2x00dev, 131, 0x32); + rt2800_bbp_glrt_write(rt2x00dev, 132, 0x08); + rt2800_bbp_glrt_write(rt2x00dev, 133, 0x28); + rt2800_bbp_glrt_write(rt2x00dev, 134, 0x19); + rt2800_bbp_glrt_write(rt2x00dev, 135, 0x0A); + rt2800_bbp_glrt_write(rt2x00dev, 138, 0x16); + rt2800_bbp_glrt_write(rt2x00dev, 139, 0x10); + rt2800_bbp_glrt_write(rt2x00dev, 140, 0x10); + rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1A); + rt2800_bbp_glrt_write(rt2x00dev, 142, 0x36); + rt2800_bbp_glrt_write(rt2x00dev, 143, 0x2C); + rt2800_bbp_glrt_write(rt2x00dev, 144, 0x26); + rt2800_bbp_glrt_write(rt2x00dev, 145, 0x24); + rt2800_bbp_glrt_write(rt2x00dev, 146, 0x42); + rt2800_bbp_glrt_write(rt2x00dev, 147, 0x40); + rt2800_bbp_glrt_write(rt2x00dev, 148, 0x30); + rt2800_bbp_glrt_write(rt2x00dev, 149, 0x29); + rt2800_bbp_glrt_write(rt2x00dev, 150, 0x4C); + rt2800_bbp_glrt_write(rt2x00dev, 151, 0x46); + rt2800_bbp_glrt_write(rt2x00dev, 152, 0x3D); + rt2800_bbp_glrt_write(rt2x00dev, 153, 0x40); + rt2800_bbp_glrt_write(rt2x00dev, 154, 0x3E); + rt2800_bbp_glrt_write(rt2x00dev, 155, 0x38); + rt2800_bbp_glrt_write(rt2x00dev, 156, 0x3D); + rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2F); + rt2800_bbp_glrt_write(rt2x00dev, 158, 0x3C); + rt2800_bbp_glrt_write(rt2x00dev, 159, 0x34); + rt2800_bbp_glrt_write(rt2x00dev, 160, 0x2C); + rt2800_bbp_glrt_write(rt2x00dev, 161, 0x2F); + rt2800_bbp_glrt_write(rt2x00dev, 162, 0x3C); + rt2800_bbp_glrt_write(rt2x00dev, 163, 0x35); + rt2800_bbp_glrt_write(rt2x00dev, 164, 0x2E); + rt2800_bbp_glrt_write(rt2x00dev, 165, 0x2F); + rt2800_bbp_glrt_write(rt2x00dev, 166, 0x49); + rt2800_bbp_glrt_write(rt2x00dev, 167, 0x41); + rt2800_bbp_glrt_write(rt2x00dev, 168, 0x36); + rt2800_bbp_glrt_write(rt2x00dev, 169, 0x39); + rt2800_bbp_glrt_write(rt2x00dev, 170, 0x30); + rt2800_bbp_glrt_write(rt2x00dev, 171, 0x30); + rt2800_bbp_glrt_write(rt2x00dev, 172, 0x0E); + rt2800_bbp_glrt_write(rt2x00dev, 173, 0x0D); + rt2800_bbp_glrt_write(rt2x00dev, 174, 0x28); + rt2800_bbp_glrt_write(rt2x00dev, 175, 0x21); + rt2800_bbp_glrt_write(rt2x00dev, 176, 0x1C); + rt2800_bbp_glrt_write(rt2x00dev, 177, 0x16); + rt2800_bbp_glrt_write(rt2x00dev, 178, 0x50); + rt2800_bbp_glrt_write(rt2x00dev, 179, 0x4A); + rt2800_bbp_glrt_write(rt2x00dev, 180, 0x43); + rt2800_bbp_glrt_write(rt2x00dev, 181, 0x50); + rt2800_bbp_glrt_write(rt2x00dev, 182, 0x10); + rt2800_bbp_glrt_write(rt2x00dev, 183, 0x10); + rt2800_bbp_glrt_write(rt2x00dev, 184, 0x10); + rt2800_bbp_glrt_write(rt2x00dev, 185, 0x10); + rt2800_bbp_glrt_write(rt2x00dev, 200, 0x7D); + rt2800_bbp_glrt_write(rt2x00dev, 201, 0x14); + rt2800_bbp_glrt_write(rt2x00dev, 202, 0x32); + rt2800_bbp_glrt_write(rt2x00dev, 203, 0x2C); + rt2800_bbp_glrt_write(rt2x00dev, 204, 0x36); + rt2800_bbp_glrt_write(rt2x00dev, 205, 0x4C); + rt2800_bbp_glrt_write(rt2x00dev, 206, 0x43); + rt2800_bbp_glrt_write(rt2x00dev, 207, 0x2C); + rt2800_bbp_glrt_write(rt2x00dev, 208, 0x2E); + rt2800_bbp_glrt_write(rt2x00dev, 209, 0x36); + rt2800_bbp_glrt_write(rt2x00dev, 210, 0x30); + rt2800_bbp_glrt_write(rt2x00dev, 211, 0x6E); + + /* BBP for G band DCOC function */ + rt2800_bbp_dcoc_write(rt2x00dev, 140, 0x0C); + rt2800_bbp_dcoc_write(rt2x00dev, 141, 0x00); + rt2800_bbp_dcoc_write(rt2x00dev, 142, 0x10); + rt2800_bbp_dcoc_write(rt2x00dev, 143, 0x10); + rt2800_bbp_dcoc_write(rt2x00dev, 144, 0x10); + rt2800_bbp_dcoc_write(rt2x00dev, 145, 0x10); + rt2800_bbp_dcoc_write(rt2x00dev, 146, 0x08); + rt2800_bbp_dcoc_write(rt2x00dev, 147, 0x40); + rt2800_bbp_dcoc_write(rt2x00dev, 148, 0x04); + rt2800_bbp_dcoc_write(rt2x00dev, 149, 0x04); + rt2800_bbp_dcoc_write(rt2x00dev, 150, 0x08); + rt2800_bbp_dcoc_write(rt2x00dev, 151, 0x08); + rt2800_bbp_dcoc_write(rt2x00dev, 152, 0x03); + rt2800_bbp_dcoc_write(rt2x00dev, 153, 0x03); + rt2800_bbp_dcoc_write(rt2x00dev, 154, 0x03); + rt2800_bbp_dcoc_write(rt2x00dev, 155, 0x02); + rt2800_bbp_dcoc_write(rt2x00dev, 156, 0x40); + rt2800_bbp_dcoc_write(rt2x00dev, 157, 0x40); + rt2800_bbp_dcoc_write(rt2x00dev, 158, 0x64); + rt2800_bbp_dcoc_write(rt2x00dev, 159, 0x64); + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); +} + +static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (rt2800_is_305x_soc(rt2x00dev)) + rt2800_init_bbp_305x_soc(rt2x00dev); + + switch (rt2x00dev->chip.rt) { + case RT2860: + case RT2872: + case RT2883: + rt2800_init_bbp_28xx(rt2x00dev); + break; + case RT3070: + case RT3071: + case RT3090: + rt2800_init_bbp_30xx(rt2x00dev); + break; + case RT3290: + rt2800_init_bbp_3290(rt2x00dev); + break; + case RT3352: + case RT5350: + rt2800_init_bbp_3352(rt2x00dev); + break; + case RT3390: + rt2800_init_bbp_3390(rt2x00dev); + break; + case RT3572: + rt2800_init_bbp_3572(rt2x00dev); + break; + case RT3593: + rt2800_init_bbp_3593(rt2x00dev); + return; + case RT3883: + rt2800_init_bbp_3883(rt2x00dev); + return; + case RT5390: + case RT5392: + rt2800_init_bbp_53xx(rt2x00dev); + break; + case RT5592: + rt2800_init_bbp_5592(rt2x00dev); + return; + case RT6352: + rt2800_init_bbp_6352(rt2x00dev); + break; + } + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + eeprom = rt2800_eeprom_read_from_array(rt2x00dev, + EEPROM_BBP_START, i); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + rt2800_bbp_write(rt2x00dev, reg_id, value); + } + } +} + +static void rt2800_led_open_drain_enable(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + reg = rt2800_register_read(rt2x00dev, OPT_14_CSR); + rt2x00_set_field32(®, OPT_14_CSR_BIT0, 1); + rt2800_register_write(rt2x00dev, OPT_14_CSR, reg); +} + +static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40, + u8 filter_target) +{ + unsigned int i; + u8 bbp; + u8 rfcsr; + u8 passband; + u8 stopband; + u8 overtuned = 0; + u8 rfcsr24 = (bw40) ? 0x27 : 0x07; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + + bbp = rt2800_bbp_read(rt2x00dev, 4); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 31); + rt2x00_set_field8(&rfcsr, RFCSR31_RX_H20M, bw40); + rt2800_rfcsr_write(rt2x00dev, 31, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 22); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * Set power & frequency of passband test tone + */ + rt2800_bbp_write(rt2x00dev, 24, 0); + + for (i = 0; i < 100; i++) { + rt2800_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + passband = rt2800_bbp_read(rt2x00dev, 55); + if (passband) + break; + } + + /* + * Set power & frequency of stopband test tone + */ + rt2800_bbp_write(rt2x00dev, 24, 0x06); + + for (i = 0; i < 100; i++) { + rt2800_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + stopband = rt2800_bbp_read(rt2x00dev, 55); + + if ((passband - stopband) <= filter_target) { + rfcsr24++; + overtuned += ((passband - stopband) == filter_target); + } else + break; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + } + + rfcsr24 -= !!overtuned; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + return rfcsr24; +} + +static void rt2800_rf_init_calibration(struct rt2x00_dev *rt2x00dev, + const unsigned int rf_reg) +{ + u8 rfcsr; + + rfcsr = rt2800_rfcsr_read(rt2x00dev, rf_reg); + rt2x00_set_field8(&rfcsr, FIELD8(0x80), 1); + rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr); + msleep(1); + rt2x00_set_field8(&rfcsr, FIELD8(0x80), 0); + rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr); +} + +static void rt2800_rx_filter_calibration(struct rt2x00_dev *rt2x00dev) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 filter_tgt_bw20; + u8 filter_tgt_bw40; + u8 rfcsr, bbp; + + /* + * TODO: sync filter_tgt values with vendor driver + */ + if (rt2x00_rt(rt2x00dev, RT3070)) { + filter_tgt_bw20 = 0x16; + filter_tgt_bw40 = 0x19; + } else { + filter_tgt_bw20 = 0x13; + filter_tgt_bw40 = 0x15; + } + + drv_data->calibration_bw20 = + rt2800_init_rx_filter(rt2x00dev, false, filter_tgt_bw20); + drv_data->calibration_bw40 = + rt2800_init_rx_filter(rt2x00dev, true, filter_tgt_bw40); + + /* + * Save BBP 25 & 26 values for later use in channel switching (for 3052) + */ + drv_data->bbp25 = rt2800_bbp_read(rt2x00dev, 25); + drv_data->bbp26 = rt2800_bbp_read(rt2x00dev, 26); + + /* + * Set back to initial state + */ + rt2800_bbp_write(rt2x00dev, 24, 0); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 22); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * Set BBP back to BW20 + */ + bbp = rt2800_bbp_read(rt2x00dev, 4); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); + rt2800_bbp_write(rt2x00dev, 4, bbp); +} + +static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 min_gain, rfcsr, bbp; + u16 eeprom; + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 17); + + rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0); + if (rt2x00_rt(rt2x00dev, RT3070) || + rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || + rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || + rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { + if (!rt2x00_has_cap_external_lna_bg(rt2x00dev)) + rt2x00_set_field8(&rfcsr, RFCSR17_R, 1); + } + + min_gain = rt2x00_rt(rt2x00dev, RT3070) ? 1 : 2; + if (drv_data->txmixer_gain_24g >= min_gain) { + rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN, + drv_data->txmixer_gain_24g); + } + + rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); + + if (rt2x00_rt(rt2x00dev, RT3090)) { + /* Turn off unused DAC1 and ADC1 to reduce power consumption */ + bbp = rt2800_bbp_read(rt2x00dev, 138); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) + rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) + rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1); + rt2800_bbp_write(rt2x00dev, 138, bbp); + } + + if (rt2x00_rt(rt2x00dev, RT3070)) { + rfcsr = rt2800_rfcsr_read(rt2x00dev, 27); + if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) + rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3); + else + rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0); + rt2x00_set_field8(&rfcsr, RFCSR27_R2, 0); + rt2x00_set_field8(&rfcsr, RFCSR27_R3, 0); + rt2x00_set_field8(&rfcsr, RFCSR27_R4, 0); + rt2800_rfcsr_write(rt2x00dev, 27, rfcsr); + } else if (rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3090) || + rt2x00_rt(rt2x00dev, RT3390)) { + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 15); + rt2x00_set_field8(&rfcsr, RFCSR15_TX_LO2_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 15, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 20); + rt2x00_set_field8(&rfcsr, RFCSR20_RX_LO1_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 21); + rt2x00_set_field8(&rfcsr, RFCSR21_RX_LO2_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 21, rfcsr); + } +} + +static void rt2800_normal_mode_setup_3593(struct rt2x00_dev *rt2x00dev) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 rfcsr; + u8 tx_gain; + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 50); + rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO2_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 51); + tx_gain = rt2x00_get_field8(drv_data->txmixer_gain_24g, + RFCSR17_TXMIXER_GAIN); + rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, tx_gain); + rt2800_rfcsr_write(rt2x00dev, 51, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 38); + rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 38, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 39); + rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); + rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + /* TODO: enable stream mode */ +} + +static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev) +{ + u8 reg; + u16 eeprom; + + /* Turn off unused DAC1 and ADC1 to reduce power consumption */ + reg = rt2800_bbp_read(rt2x00dev, 138); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) + rt2x00_set_field8(®, BBP138_RX_ADC1, 0); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) + rt2x00_set_field8(®, BBP138_TX_DAC1, 1); + rt2800_bbp_write(rt2x00dev, 138, reg); + + reg = rt2800_rfcsr_read(rt2x00dev, 38); + rt2x00_set_field8(®, RFCSR38_RX_LO1_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 38, reg); + + reg = rt2800_rfcsr_read(rt2x00dev, 39); + rt2x00_set_field8(®, RFCSR39_RX_LO2_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 39, reg); + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + reg = rt2800_rfcsr_read(rt2x00dev, 30); + rt2x00_set_field8(®, RFCSR30_RX_VCM, 2); + rt2800_rfcsr_write(rt2x00dev, 30, reg); +} + +static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rf_init_calibration(rt2x00dev, 30); + + rt2800_rfcsr_write(rt2x00dev, 0, 0x50); + rt2800_rfcsr_write(rt2x00dev, 1, 0x01); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); + rt2800_rfcsr_write(rt2x00dev, 3, 0x75); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x50); + rt2800_rfcsr_write(rt2x00dev, 8, 0x39); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x60); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x75); + rt2800_rfcsr_write(rt2x00dev, 13, 0x75); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x31); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 26, 0x25); + rt2800_rfcsr_write(rt2x00dev, 27, 0x23); + rt2800_rfcsr_write(rt2x00dev, 28, 0x13); + rt2800_rfcsr_write(rt2x00dev, 29, 0x83); + rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 31, 0x00); +} + +static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev) +{ + u8 rfcsr; + u16 eeprom; + u32 reg; + + /* XXX vendor driver do this only for 3070 */ + rt2800_rf_init_calibration(rt2x00dev, 30); + + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x60); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x41); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x03); + rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); + + if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { + reg = rt2800_register_read(rt2x00dev, LDO_CFG0); + rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); + rt2800_register_write(rt2x00dev, LDO_CFG0, reg); + } else if (rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3090)) { + rt2800_rfcsr_write(rt2x00dev, 31, 0x14); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); + rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + reg = rt2800_register_read(rt2x00dev, LDO_CFG0); + rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); + if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || + rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST)) + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); + else + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); + } + rt2800_register_write(rt2x00dev, LDO_CFG0, reg); + + reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH); + rt2x00_set_field32(®, GPIO_SWITCH_5, 0); + rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); + } + + rt2800_rx_filter_calibration(rt2x00dev); + + if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) || + rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || + rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + + rt2800_led_open_drain_enable(rt2x00dev); + rt2800_normal_mode_setup_3xxx(rt2x00dev); +} + +static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev) +{ + u8 rfcsr; + + rt2800_rf_init_calibration(rt2x00dev, 2); + + rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x08); + rt2800_rfcsr_write(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf3); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 18, 0x02); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 25, 0x83); + rt2800_rfcsr_write(rt2x00dev, 26, 0x82); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x05); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x98); + rt2800_rfcsr_write(rt2x00dev, 52, 0x38); + rt2800_rfcsr_write(rt2x00dev, 53, 0x00); + rt2800_rfcsr_write(rt2x00dev, 54, 0x78); + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + rt2800_rfcsr_write(rt2x00dev, 56, 0x02); + rt2800_rfcsr_write(rt2x00dev, 57, 0x80); + rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 59, 0x09); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0xc1); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 29); + rt2x00_set_field8(&rfcsr, RFCSR29_RSSI_GAIN, 3); + rt2800_rfcsr_write(rt2x00dev, 29, rfcsr); + + rt2800_led_open_drain_enable(rt2x00dev); + rt2800_normal_mode_setup_3xxx(rt2x00dev); +} + +static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev) +{ + int tx0_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX0, + &rt2x00dev->cap_flags); + int tx1_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX1, + &rt2x00dev->cap_flags); + u8 rfcsr; + + rt2800_rf_init_calibration(rt2x00dev, 30); + + rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); + rt2800_rfcsr_write(rt2x00dev, 1, 0x23); + rt2800_rfcsr_write(rt2x00dev, 2, 0x50); + rt2800_rfcsr_write(rt2x00dev, 3, 0x18); + rt2800_rfcsr_write(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0x33); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0xd2); + rt2800_rfcsr_write(rt2x00dev, 11, 0x42); + rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x5a); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x01); + rt2800_rfcsr_write(rt2x00dev, 18, 0x45); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x00); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + rt2800_rfcsr_write(rt2x00dev, 28, 0x03); + rt2800_rfcsr_write(rt2x00dev, 29, 0x00); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rfcsr = 0x01; + if (tx0_ext_pa) + rt2x00_set_field8(&rfcsr, RFCSR34_TX0_EXT_PA, 1); + if (tx1_ext_pa) + rt2x00_set_field8(&rfcsr, RFCSR34_TX1_EXT_PA, 1); + rt2800_rfcsr_write(rt2x00dev, 34, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 35, 0x03); + rt2800_rfcsr_write(rt2x00dev, 36, 0xbd); + rt2800_rfcsr_write(rt2x00dev, 37, 0x3c); + rt2800_rfcsr_write(rt2x00dev, 38, 0x5f); + rt2800_rfcsr_write(rt2x00dev, 39, 0xc5); + rt2800_rfcsr_write(rt2x00dev, 40, 0x33); + rfcsr = 0x52; + if (!tx0_ext_pa) { + rt2x00_set_field8(&rfcsr, RFCSR41_BIT1, 1); + rt2x00_set_field8(&rfcsr, RFCSR41_BIT4, 1); + } + rt2800_rfcsr_write(rt2x00dev, 41, rfcsr); + rfcsr = 0x52; + if (!tx1_ext_pa) { + rt2x00_set_field8(&rfcsr, RFCSR42_BIT1, 1); + rt2x00_set_field8(&rfcsr, RFCSR42_BIT4, 1); + } + rt2800_rfcsr_write(rt2x00dev, 42, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 43, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 44, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 45, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 46, 0xdd); + rt2800_rfcsr_write(rt2x00dev, 47, 0x0d); + rt2800_rfcsr_write(rt2x00dev, 48, 0x14); + rt2800_rfcsr_write(rt2x00dev, 49, 0x00); + rfcsr = 0x2d; + if (tx0_ext_pa) + rt2x00_set_field8(&rfcsr, RFCSR50_TX0_EXT_PA, 1); + if (tx1_ext_pa) + rt2x00_set_field8(&rfcsr, RFCSR50_TX1_EXT_PA, 1); + rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); + rt2800_rfcsr_write(rt2x00dev, 51, (tx0_ext_pa ? 0x52 : 0x7f)); + rt2800_rfcsr_write(rt2x00dev, 52, (tx0_ext_pa ? 0xc0 : 0x00)); + rt2800_rfcsr_write(rt2x00dev, 53, (tx0_ext_pa ? 0xd2 : 0x52)); + rt2800_rfcsr_write(rt2x00dev, 54, (tx0_ext_pa ? 0xc0 : 0x1b)); + rt2800_rfcsr_write(rt2x00dev, 55, (tx1_ext_pa ? 0x52 : 0x7f)); + rt2800_rfcsr_write(rt2x00dev, 56, (tx1_ext_pa ? 0xc0 : 0x00)); + rt2800_rfcsr_write(rt2x00dev, 57, (tx0_ext_pa ? 0x49 : 0x52)); + rt2800_rfcsr_write(rt2x00dev, 58, (tx1_ext_pa ? 0xc0 : 0x1b)); + rt2800_rfcsr_write(rt2x00dev, 59, 0x00); + rt2800_rfcsr_write(rt2x00dev, 60, 0x00); + rt2800_rfcsr_write(rt2x00dev, 61, 0x00); + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); + + rt2800_rx_filter_calibration(rt2x00dev); + rt2800_led_open_drain_enable(rt2x00dev); + rt2800_normal_mode_setup_3xxx(rt2x00dev); +} + +static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_rf_init_calibration(rt2x00dev, 30); + + rt2800_rfcsr_write(rt2x00dev, 0, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 1, 0xe1); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 3, 0x62); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x8b); + rt2800_rfcsr_write(rt2x00dev, 6, 0x42); + rt2800_rfcsr_write(rt2x00dev, 7, 0x34); + rt2800_rfcsr_write(rt2x00dev, 8, 0x00); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 10, 0x61); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x3b); + rt2800_rfcsr_write(rt2x00dev, 13, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x53); + rt2800_rfcsr_write(rt2x00dev, 16, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 17, 0x94); + rt2800_rfcsr_write(rt2x00dev, 18, 0x5c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 20, 0xb2); + rt2800_rfcsr_write(rt2x00dev, 21, 0xf6); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x14); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); + rt2800_rfcsr_write(rt2x00dev, 26, 0x85); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x41); + rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); + rt2800_rfcsr_write(rt2x00dev, 30, 0x20); + rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); + + reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH); + rt2x00_set_field32(®, GPIO_SWITCH_5, 0); + rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); + + rt2800_rx_filter_calibration(rt2x00dev); + + if (rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + + rt2800_led_open_drain_enable(rt2x00dev); + rt2800_normal_mode_setup_3xxx(rt2x00dev); +} + +static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev) +{ + u8 rfcsr; + u32 reg; + + rt2800_rf_init_calibration(rt2x00dev, 30); + + rt2800_rfcsr_write(rt2x00dev, 0, 0x70); + rt2800_rfcsr_write(rt2x00dev, 1, 0x81); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 3, 0x02); + rt2800_rfcsr_write(rt2x00dev, 4, 0x4c); + rt2800_rfcsr_write(rt2x00dev, 5, 0x05); + rt2800_rfcsr_write(rt2x00dev, 6, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); + rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); + rt2800_rfcsr_write(rt2x00dev, 12, 0x70); + rt2800_rfcsr_write(rt2x00dev, 13, 0x65); + rt2800_rfcsr_write(rt2x00dev, 14, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 15, 0x53); + rt2800_rfcsr_write(rt2x00dev, 16, 0x4c); + rt2800_rfcsr_write(rt2x00dev, 17, 0x23); + rt2800_rfcsr_write(rt2x00dev, 18, 0xac); + rt2800_rfcsr_write(rt2x00dev, 19, 0x93); + rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 21, 0xd0); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x3c); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x15); + rt2800_rfcsr_write(rt2x00dev, 26, 0x85); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 30, 0x09); + rt2800_rfcsr_write(rt2x00dev, 31, 0x10); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); + rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + reg = rt2800_register_read(rt2x00dev, LDO_CFG0); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); + rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); + rt2800_register_write(rt2x00dev, LDO_CFG0, reg); + msleep(1); + reg = rt2800_register_read(rt2x00dev, LDO_CFG0); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); + rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); + rt2800_register_write(rt2x00dev, LDO_CFG0, reg); + + rt2800_rx_filter_calibration(rt2x00dev); + rt2800_led_open_drain_enable(rt2x00dev); + rt2800_normal_mode_setup_3xxx(rt2x00dev); +} + +static void rt3593_post_bbp_init(struct rt2x00_dev *rt2x00dev) +{ + u8 bbp; + bool txbf_enabled = false; /* FIXME */ + + bbp = rt2800_bbp_read(rt2x00dev, 105); + if (rt2x00dev->default_ant.rx_chain_num == 1) + rt2x00_set_field8(&bbp, BBP105_MLD, 0); + else + rt2x00_set_field8(&bbp, BBP105_MLD, 1); + rt2800_bbp_write(rt2x00dev, 105, bbp); + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + rt2800_bbp_write(rt2x00dev, 92, 0x02); + rt2800_bbp_write(rt2x00dev, 82, 0x82); + rt2800_bbp_write(rt2x00dev, 106, 0x05); + rt2800_bbp_write(rt2x00dev, 104, 0x92); + rt2800_bbp_write(rt2x00dev, 88, 0x90); + rt2800_bbp_write(rt2x00dev, 148, 0xc8); + rt2800_bbp_write(rt2x00dev, 47, 0x48); + rt2800_bbp_write(rt2x00dev, 120, 0x50); + + if (txbf_enabled) + rt2800_bbp_write(rt2x00dev, 163, 0xbd); + else + rt2800_bbp_write(rt2x00dev, 163, 0x9d); + + /* SNR mapping */ + rt2800_bbp_write(rt2x00dev, 142, 6); + rt2800_bbp_write(rt2x00dev, 143, 160); + rt2800_bbp_write(rt2x00dev, 142, 7); + rt2800_bbp_write(rt2x00dev, 143, 161); + rt2800_bbp_write(rt2x00dev, 142, 8); + rt2800_bbp_write(rt2x00dev, 143, 162); + + /* ADC/DAC control */ + rt2800_bbp_write(rt2x00dev, 31, 0x08); + + /* RX AGC energy lower bound in log2 */ + rt2800_bbp_write(rt2x00dev, 68, 0x0b); + + /* FIXME: BBP 105 owerwrite? */ + rt2800_bbp_write(rt2x00dev, 105, 0x04); + +} + +static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u32 reg; + u8 rfcsr; + + /* Disable GPIO #4 and #7 function for LAN PE control */ + reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH); + rt2x00_set_field32(®, GPIO_SWITCH_4, 0); + rt2x00_set_field32(®, GPIO_SWITCH_7, 0); + rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); + + /* Initialize default register values */ + rt2800_rfcsr_write(rt2x00dev, 1, 0x03); + rt2800_rfcsr_write(rt2x00dev, 3, 0x80); + rt2800_rfcsr_write(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0x40); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0xd3); + rt2800_rfcsr_write(rt2x00dev, 11, 0x40); + rt2800_rfcsr_write(rt2x00dev, 12, 0x4e); + rt2800_rfcsr_write(rt2x00dev, 13, 0x12); + rt2800_rfcsr_write(rt2x00dev, 18, 0x40); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x78); + rt2800_rfcsr_write(rt2x00dev, 33, 0x3b); + rt2800_rfcsr_write(rt2x00dev, 34, 0x3c); + rt2800_rfcsr_write(rt2x00dev, 35, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 38, 0x86); + rt2800_rfcsr_write(rt2x00dev, 39, 0x23); + rt2800_rfcsr_write(rt2x00dev, 44, 0xd3); + rt2800_rfcsr_write(rt2x00dev, 45, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 46, 0x60); + rt2800_rfcsr_write(rt2x00dev, 49, 0x8e); + rt2800_rfcsr_write(rt2x00dev, 50, 0x86); + rt2800_rfcsr_write(rt2x00dev, 51, 0x75); + rt2800_rfcsr_write(rt2x00dev, 52, 0x45); + rt2800_rfcsr_write(rt2x00dev, 53, 0x18); + rt2800_rfcsr_write(rt2x00dev, 54, 0x18); + rt2800_rfcsr_write(rt2x00dev, 55, 0x18); + rt2800_rfcsr_write(rt2x00dev, 56, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 57, 0x6e); + + /* Initiate calibration */ + /* TODO: use rt2800_rf_init_calibration ? */ + rfcsr = rt2800_rfcsr_read(rt2x00dev, 2); + rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); + + rt2800_freq_cal_mode1(rt2x00dev); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 18); + rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1); + rt2800_rfcsr_write(rt2x00dev, 18, rfcsr); + + reg = rt2800_register_read(rt2x00dev, LDO_CFG0); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); + rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); + rt2800_register_write(rt2x00dev, LDO_CFG0, reg); + usleep_range(1000, 1500); + reg = rt2800_register_read(rt2x00dev, LDO_CFG0); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); + rt2800_register_write(rt2x00dev, LDO_CFG0, reg); + + /* Set initial values for RX filter calibration */ + drv_data->calibration_bw20 = 0x1f; + drv_data->calibration_bw40 = 0x2f; + + /* Save BBP 25 & 26 values for later use in channel switching */ + drv_data->bbp25 = rt2800_bbp_read(rt2x00dev, 25); + drv_data->bbp26 = rt2800_bbp_read(rt2x00dev, 26); + + rt2800_led_open_drain_enable(rt2x00dev); + rt2800_normal_mode_setup_3593(rt2x00dev); + + rt3593_post_bbp_init(rt2x00dev); + + /* TODO: enable stream mode support */ +} + +static void rt2800_init_rfcsr_5350(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); + rt2800_rfcsr_write(rt2x00dev, 1, 0x23); + rt2800_rfcsr_write(rt2x00dev, 2, 0x50); + rt2800_rfcsr_write(rt2x00dev, 3, 0x08); + rt2800_rfcsr_write(rt2x00dev, 4, 0x49); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + if (rt2800_clk_is_20mhz(rt2x00dev)) + rt2800_rfcsr_write(rt2x00dev, 13, 0x1f); + else + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x00); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0x00); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0xd0); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0c); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa6); + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x80); + rt2800_rfcsr_write(rt2x00dev, 50, 0x00); + rt2800_rfcsr_write(rt2x00dev, 51, 0x00); + rt2800_rfcsr_write(rt2x00dev, 52, 0x38); + rt2800_rfcsr_write(rt2x00dev, 53, 0x00); + rt2800_rfcsr_write(rt2x00dev, 54, 0x38); + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + rt2800_rfcsr_write(rt2x00dev, 56, 0x82); + rt2800_rfcsr_write(rt2x00dev, 57, 0x00); + rt2800_rfcsr_write(rt2x00dev, 58, 0x39); + rt2800_rfcsr_write(rt2x00dev, 59, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0xd1); + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); +} + +static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev) +{ + u8 rfcsr; + + /* TODO: get the actual ECO value from the SoC */ + const unsigned int eco = 5; + + rt2800_rf_init_calibration(rt2x00dev, 2); + + rt2800_rfcsr_write(rt2x00dev, 0, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 1, 0x03); + rt2800_rfcsr_write(rt2x00dev, 2, 0x50); + rt2800_rfcsr_write(rt2x00dev, 3, 0x20); + rt2800_rfcsr_write(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0x40); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0x5b); + rt2800_rfcsr_write(rt2x00dev, 9, 0x08); + rt2800_rfcsr_write(rt2x00dev, 10, 0xd3); + rt2800_rfcsr_write(rt2x00dev, 11, 0x48); + rt2800_rfcsr_write(rt2x00dev, 12, 0x1a); + rt2800_rfcsr_write(rt2x00dev, 13, 0x12); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + + /* RFCSR 17 will be initialized later based on the + * frequency offset stored in the EEPROM + */ + + rt2800_rfcsr_write(rt2x00dev, 18, 0x40); + rt2800_rfcsr_write(rt2x00dev, 19, 0x00); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + rt2800_rfcsr_write(rt2x00dev, 25, 0x00); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x00); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x20); + rt2800_rfcsr_write(rt2x00dev, 35, 0x00); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x00); + rt2800_rfcsr_write(rt2x00dev, 38, 0x86); + rt2800_rfcsr_write(rt2x00dev, 39, 0x23); + rt2800_rfcsr_write(rt2x00dev, 40, 0x00); + rt2800_rfcsr_write(rt2x00dev, 41, 0x00); + rt2800_rfcsr_write(rt2x00dev, 42, 0x00); + rt2800_rfcsr_write(rt2x00dev, 43, 0x00); + rt2800_rfcsr_write(rt2x00dev, 44, 0x93); + rt2800_rfcsr_write(rt2x00dev, 45, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 46, 0x60); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x00); + rt2800_rfcsr_write(rt2x00dev, 49, 0x8e); + rt2800_rfcsr_write(rt2x00dev, 50, 0x86); + rt2800_rfcsr_write(rt2x00dev, 51, 0x51); + rt2800_rfcsr_write(rt2x00dev, 52, 0x05); + rt2800_rfcsr_write(rt2x00dev, 53, 0x76); + rt2800_rfcsr_write(rt2x00dev, 54, 0x76); + rt2800_rfcsr_write(rt2x00dev, 55, 0x76); + rt2800_rfcsr_write(rt2x00dev, 56, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 57, 0x3e); + rt2800_rfcsr_write(rt2x00dev, 58, 0x00); + rt2800_rfcsr_write(rt2x00dev, 59, 0x00); + rt2800_rfcsr_write(rt2x00dev, 60, 0x00); + rt2800_rfcsr_write(rt2x00dev, 61, 0x00); + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); + + /* TODO: rx filter calibration? */ + + rt2800_bbp_write(rt2x00dev, 137, 0x0f); + + rt2800_bbp_write(rt2x00dev, 163, 0x9d); + + rt2800_bbp_write(rt2x00dev, 105, 0x05); + + rt2800_bbp_write(rt2x00dev, 179, 0x02); + rt2800_bbp_write(rt2x00dev, 180, 0x00); + rt2800_bbp_write(rt2x00dev, 182, 0x40); + rt2800_bbp_write(rt2x00dev, 180, 0x01); + rt2800_bbp_write(rt2x00dev, 182, 0x9c); + + rt2800_bbp_write(rt2x00dev, 179, 0x00); + + rt2800_bbp_write(rt2x00dev, 142, 0x04); + rt2800_bbp_write(rt2x00dev, 143, 0x3b); + rt2800_bbp_write(rt2x00dev, 142, 0x06); + rt2800_bbp_write(rt2x00dev, 143, 0xa0); + rt2800_bbp_write(rt2x00dev, 142, 0x07); + rt2800_bbp_write(rt2x00dev, 143, 0xa1); + rt2800_bbp_write(rt2x00dev, 142, 0x08); + rt2800_bbp_write(rt2x00dev, 143, 0xa2); + rt2800_bbp_write(rt2x00dev, 148, 0xc8); + + if (eco == 5) { + rt2800_rfcsr_write(rt2x00dev, 32, 0xd8); + rt2800_rfcsr_write(rt2x00dev, 33, 0x32); + } + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 2); + rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0); + rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); + msleep(1); + rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); + rfcsr |= 0xc0; + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 22); + rfcsr |= 0x20; + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 46); + rfcsr |= 0x20; + rt2800_rfcsr_write(rt2x00dev, 46, rfcsr); + + rfcsr = rt2800_rfcsr_read(rt2x00dev, 20); + rfcsr &= ~0xee; + rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); +} + +static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rf_init_calibration(rt2x00dev, 2); + + rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x88); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); + else + rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x00); + + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0x00); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + if (rt2x00_is_usb(rt2x00dev) && + rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + else + rt2800_rfcsr_write(rt2x00dev, 25, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + + rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd2); + rt2800_rfcsr_write(rt2x00dev, 43, 0x9a); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + else + rt2800_rfcsr_write(rt2x00dev, 46, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x94); + + rt2800_rfcsr_write(rt2x00dev, 52, 0x38); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 53, 0x00); + else + rt2800_rfcsr_write(rt2x00dev, 53, 0x84); + rt2800_rfcsr_write(rt2x00dev, 54, 0x78); + rt2800_rfcsr_write(rt2x00dev, 55, 0x44); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 56, 0x42); + else + rt2800_rfcsr_write(rt2x00dev, 56, 0x22); + rt2800_rfcsr_write(rt2x00dev, 57, 0x80); + rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 59, 0x8f); + + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { + if (rt2x00_is_usb(rt2x00dev)) + rt2800_rfcsr_write(rt2x00dev, 61, 0xd1); + else + rt2800_rfcsr_write(rt2x00dev, 61, 0xd5); + } else { + if (rt2x00_is_usb(rt2x00dev)) + rt2800_rfcsr_write(rt2x00dev, 61, 0xdd); + else + rt2800_rfcsr_write(rt2x00dev, 61, 0xb5); + } + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); + + rt2800_normal_mode_setup_5xxx(rt2x00dev); + + rt2800_led_open_drain_enable(rt2x00dev); +} + +static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rf_init_calibration(rt2x00dev, 2); + + rt2800_rfcsr_write(rt2x00dev, 1, 0x17); + rt2800_rfcsr_write(rt2x00dev, 3, 0x88); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x4d); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x8d); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 24, 0x44); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 26, 0x82); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x20); + rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x89); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + rt2800_rfcsr_write(rt2x00dev, 47, 0x0c); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x94); + rt2800_rfcsr_write(rt2x00dev, 50, 0x94); + rt2800_rfcsr_write(rt2x00dev, 51, 0x3a); + rt2800_rfcsr_write(rt2x00dev, 52, 0x48); + rt2800_rfcsr_write(rt2x00dev, 53, 0x44); + rt2800_rfcsr_write(rt2x00dev, 54, 0x38); + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + rt2800_rfcsr_write(rt2x00dev, 56, 0xa1); + rt2800_rfcsr_write(rt2x00dev, 57, 0x00); + rt2800_rfcsr_write(rt2x00dev, 58, 0x39); + rt2800_rfcsr_write(rt2x00dev, 59, 0x07); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0x91); + rt2800_rfcsr_write(rt2x00dev, 62, 0x39); + rt2800_rfcsr_write(rt2x00dev, 63, 0x07); + + rt2800_normal_mode_setup_5xxx(rt2x00dev); + + rt2800_led_open_drain_enable(rt2x00dev); +} + +static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rf_init_calibration(rt2x00dev, 30); + + rt2800_rfcsr_write(rt2x00dev, 1, 0x3F); + rt2800_rfcsr_write(rt2x00dev, 3, 0x08); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + rt2800_rfcsr_write(rt2x00dev, 6, 0xE4); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x4D); + rt2800_rfcsr_write(rt2x00dev, 20, 0x10); + rt2800_rfcsr_write(rt2x00dev, 21, 0x8D); + rt2800_rfcsr_write(rt2x00dev, 26, 0x82); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 47, 0x0C); + rt2800_rfcsr_write(rt2x00dev, 53, 0x22); + rt2800_rfcsr_write(rt2x00dev, 63, 0x07); + + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + msleep(1); + + rt2800_freq_cal_mode1(rt2x00dev); + + /* Enable DC filter */ + if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_normal_mode_setup_5xxx(rt2x00dev); + + if (rt2x00_rt_rev_lt(rt2x00dev, RT5592, REV_RT5592C)) + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + + rt2800_led_open_drain_enable(rt2x00dev); +} + +static void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev) +{ + u8 rfb5r1_org, rfb7r1_org, rfvalue; + u32 mac0518, mac051c, mac0528, mac052c; + u8 i; + + mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0); + mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0); + mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2); + mac052c = rt2800_register_read(rt2x00dev, RF_BYPASS2); + + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0); + rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0); + + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0xC); + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x3306); + rt2800_register_write(rt2x00dev, RF_CONTROL2, 0x3330); + rt2800_register_write(rt2x00dev, RF_BYPASS2, 0xfffff); + rfb5r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); + rfb7r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1); + + rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4); + for (i = 0; i < 100; ++i) { + usleep_range(50, 100); + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); + if ((rfvalue & 0x04) != 0x4) + break; + } + rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org); + + rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4); + for (i = 0; i < 100; ++i) { + usleep_range(50, 100); + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1); + if ((rfvalue & 0x04) != 0x4) + break; + } + rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org); + + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0); + rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0); + rt2800_register_write(rt2x00dev, RF_CONTROL0, mac0518); + rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c); + rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528); + rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c); +} + +static int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2) +{ + int calcode = ((d2 - d1) * 1000) / 43; + + if ((calcode % 10) >= 5) + calcode += 10; + calcode = (calcode / 10); + + return calcode; +} + +static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev) +{ + u32 savemacsysctrl; + u8 saverfb0r1, saverfb0r34, saverfb0r35; + u8 saverfb5r4, saverfb5r17, saverfb5r18; + u8 saverfb5r19, saverfb5r20; + u8 savebbpr22, savebbpr47, savebbpr49; + u8 bytevalue = 0; + int rcalcode; + u8 r_cal_code = 0; + s8 d1 = 0, d2 = 0; + u8 rfvalue; + u32 MAC_RF_BYPASS0, MAC_RF_CONTROL0, MAC_PWR_PIN_CFG; + u32 maccfg; + + saverfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); + saverfb0r34 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 34); + saverfb0r35 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); + saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); + saverfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); + saverfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); + saverfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); + saverfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); + + savebbpr22 = rt2800_bbp_read(rt2x00dev, 22); + savebbpr47 = rt2800_bbp_read(rt2x00dev, 47); + savebbpr49 = rt2800_bbp_read(rt2x00dev, 49); + + savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + MAC_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0); + MAC_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0); + MAC_PWR_PIN_CFG = rt2800_register_read(rt2x00dev, PWR_PIN_CFG); + + maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + maccfg &= (~0x04); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) + rt2x00_warn(rt2x00dev, "Wait MAC Tx Status to MAX !!!\n"); + + maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + maccfg &= (~0x08); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX))) + rt2x00_warn(rt2x00dev, "Wait MAC Rx Status to MAX !!!\n"); + + rfvalue = (MAC_RF_BYPASS0 | 0x3004); + rt2800_register_write(rt2x00dev, RF_BYPASS0, rfvalue); + rfvalue = (MAC_RF_CONTROL0 | (~0x3002)); + rt2800_register_write(rt2x00dev, RF_CONTROL0, rfvalue); + + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x27); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0x83); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x00); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20); + + rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x00); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, 0x13); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); + + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x1); + + rt2800_bbp_write(rt2x00dev, 47, 0x04); + rt2800_bbp_write(rt2x00dev, 22, 0x80); + usleep_range(100, 200); + bytevalue = rt2800_bbp_read(rt2x00dev, 49); + if (bytevalue > 128) + d1 = bytevalue - 256; + else + d1 = (s8)bytevalue; + rt2800_bbp_write(rt2x00dev, 22, 0x0); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x01); + + rt2800_bbp_write(rt2x00dev, 22, 0x80); + usleep_range(100, 200); + bytevalue = rt2800_bbp_read(rt2x00dev, 49); + if (bytevalue > 128) + d2 = bytevalue - 256; + else + d2 = (s8)bytevalue; + rt2800_bbp_write(rt2x00dev, 22, 0x0); + + rcalcode = rt2800_calcrcalibrationcode(rt2x00dev, d1, d2); + if (rcalcode < 0) + r_cal_code = 256 + rcalcode; + else + r_cal_code = (u8)rcalcode; + + rt2800_rfcsr_write_bank(rt2x00dev, 0, 7, r_cal_code); + + rt2800_bbp_write(rt2x00dev, 22, 0x0); + + bytevalue = rt2800_bbp_read(rt2x00dev, 21); + bytevalue |= 0x1; + rt2800_bbp_write(rt2x00dev, 21, bytevalue); + bytevalue = rt2800_bbp_read(rt2x00dev, 21); + bytevalue &= (~0x1); + rt2800_bbp_write(rt2x00dev, 21, bytevalue); + + rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, saverfb0r1); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, saverfb0r34); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, saverfb0r35); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20); + + rt2800_bbp_write(rt2x00dev, 22, savebbpr22); + rt2800_bbp_write(rt2x00dev, 47, savebbpr47); + rt2800_bbp_write(rt2x00dev, 49, savebbpr49); + + rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0); + rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG); +} + +static void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev) +{ + u8 bbpreg = 0; + u32 macvalue = 0; + u8 saverfb0r2, saverfb5r4, saverfb7r4, rfvalue; + int i; + + saverfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); + rfvalue = saverfb0r2; + rfvalue |= 0x03; + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfvalue); + + rt2800_bbp_write(rt2x00dev, 158, 141); + bbpreg = rt2800_bbp_read(rt2x00dev, 159); + bbpreg |= 0x10; + rt2800_bbp_write(rt2x00dev, 159, bbpreg); + + macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x8); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) + rt2x00_warn(rt2x00dev, "RF TX busy in RX RXDCOC calibration\n"); + + saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); + saverfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); + saverfb5r4 = saverfb5r4 & (~0x40); + saverfb7r4 = saverfb7r4 & (~0x40); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x64); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, saverfb7r4); + + rt2800_bbp_write(rt2x00dev, 158, 141); + bbpreg = rt2800_bbp_read(rt2x00dev, 159); + bbpreg = bbpreg & (~0x40); + rt2800_bbp_write(rt2x00dev, 159, bbpreg); + bbpreg |= 0x48; + rt2800_bbp_write(rt2x00dev, 159, bbpreg); + + for (i = 0; i < 10000; i++) { + bbpreg = rt2800_bbp_read(rt2x00dev, 159); + if ((bbpreg & 0x40) == 0) + break; + usleep_range(50, 100); + } + + bbpreg = rt2800_bbp_read(rt2x00dev, 159); + bbpreg = bbpreg & (~0x40); + rt2800_bbp_write(rt2x00dev, 159, bbpreg); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); + + rt2800_bbp_write(rt2x00dev, 158, 141); + bbpreg = rt2800_bbp_read(rt2x00dev, 159); + bbpreg &= (~0x10); + rt2800_bbp_write(rt2x00dev, 159, bbpreg); + + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2); +} + +static u32 rt2800_do_sqrt_accumulation(u32 si) +{ + u32 root, root_pre, bit; + s8 i; + + bit = 1 << 15; + root = 0; + for (i = 15; i >= 0; i = i - 1) { + root_pre = root + bit; + if ((root_pre * root_pre) <= si) + root = root_pre; + bit = bit >> 1; + } + + return root; +} + +static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev) +{ + u8 rfb0r1, rfb0r2, rfb0r42; + u8 rfb4r0, rfb4r19; + u8 rfb5r3, rfb5r4, rfb5r17, rfb5r18, rfb5r19, rfb5r20; + u8 rfb6r0, rfb6r19; + u8 rfb7r3, rfb7r4, rfb7r17, rfb7r18, rfb7r19, rfb7r20; + + u8 bbp1, bbp4; + u8 bbpr241, bbpr242; + u32 i; + u8 ch_idx; + u8 bbpval; + u8 rfval, vga_idx = 0; + int mi = 0, mq = 0, si = 0, sq = 0, riq = 0; + int sigma_i, sigma_q, r_iq, g_rx; + int g_imb; + int ph_rx; + u32 savemacsysctrl = 0; + u32 orig_RF_CONTROL0 = 0; + u32 orig_RF_BYPASS0 = 0; + u32 orig_RF_CONTROL1 = 0; + u32 orig_RF_BYPASS1 = 0; + u32 orig_RF_CONTROL3 = 0; + u32 orig_RF_BYPASS3 = 0; + u32 bbpval1 = 0; + static const u8 rf_vga_table[] = {0x20, 0x21, 0x22, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f}; + + savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + orig_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0); + orig_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0); + orig_RF_CONTROL1 = rt2800_register_read(rt2x00dev, RF_CONTROL1); + orig_RF_BYPASS1 = rt2800_register_read(rt2x00dev, RF_BYPASS1); + orig_RF_CONTROL3 = rt2800_register_read(rt2x00dev, RF_CONTROL3); + orig_RF_BYPASS3 = rt2800_register_read(rt2x00dev, RF_BYPASS3); + + bbp1 = rt2800_bbp_read(rt2x00dev, 1); + bbp4 = rt2800_bbp_read(rt2x00dev, 4); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x0); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) + rt2x00_warn(rt2x00dev, "Timeout waiting for MAC status in RXIQ calibration\n"); + + bbpval = bbp4 & (~0x18); + bbpval = bbp4 | 0x00; + rt2800_bbp_write(rt2x00dev, 4, bbpval); + + bbpval = rt2800_bbp_read(rt2x00dev, 21); + bbpval = bbpval | 1; + rt2800_bbp_write(rt2x00dev, 21, bbpval); + bbpval = bbpval & 0xfe; + rt2800_bbp_write(rt2x00dev, 21, bbpval); + + rt2800_register_write(rt2x00dev, RF_CONTROL1, 0x00000202); + rt2800_register_write(rt2x00dev, RF_BYPASS1, 0x00000303); + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) + rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0101); + else + rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0000); + + rt2800_register_write(rt2x00dev, RF_BYPASS3, 0xf1f1); + + rfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); + rfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); + rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); + rfb4r0 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0); + rfb4r19 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 19); + rfb5r3 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); + rfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); + rfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); + rfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); + rfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); + rfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); + + rfb6r0 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0); + rfb6r19 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 19); + rfb7r3 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3); + rfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); + rfb7r17 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17); + rfb7r18 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18); + rfb7r19 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19); + rfb7r20 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20); + + rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x87); + rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0x27); + rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x38); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x38); + rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x80); + rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0xC1); + rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x60); + rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00); + + rt2800_bbp_write(rt2x00dev, 23, 0x0); + rt2800_bbp_write(rt2x00dev, 24, 0x0); + + rt2800_bbp_dcoc_write(rt2x00dev, 5, 0x0); + + bbpr241 = rt2800_bbp_read(rt2x00dev, 241); + bbpr242 = rt2800_bbp_read(rt2x00dev, 242); + + rt2800_bbp_write(rt2x00dev, 241, 0x10); + rt2800_bbp_write(rt2x00dev, 242, 0x84); + rt2800_bbp_write(rt2x00dev, 244, 0x31); + + bbpval = rt2800_bbp_dcoc_read(rt2x00dev, 3); + bbpval = bbpval & (~0x7); + rt2800_bbp_dcoc_write(rt2x00dev, 3, bbpval); + + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); + udelay(1); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006); + usleep_range(1, 200); + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003376); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006); + udelay(1); + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + rt2800_bbp_write(rt2x00dev, 23, 0x06); + rt2800_bbp_write(rt2x00dev, 24, 0x06); + } else { + rt2800_bbp_write(rt2x00dev, 23, 0x02); + rt2800_bbp_write(rt2x00dev, 24, 0x02); + } + + for (ch_idx = 0; ch_idx < 2; ch_idx = ch_idx + 1) { + if (ch_idx == 0) { + rfval = rfb0r1 & (~0x3); + rfval = rfb0r1 | 0x1; + rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval); + rfval = rfb0r2 & (~0x33); + rfval = rfb0r2 | 0x11; + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval); + rfval = rfb0r42 & (~0x50); + rfval = rfb0r42 | 0x10; + rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval); + + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006); + udelay(1); + + bbpval = bbp1 & (~0x18); + bbpval = bbpval | 0x00; + rt2800_bbp_write(rt2x00dev, 1, bbpval); + + rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x00); + } else { + rfval = rfb0r1 & (~0x3); + rfval = rfb0r1 | 0x2; + rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval); + rfval = rfb0r2 & (~0x33); + rfval = rfb0r2 | 0x22; + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval); + rfval = rfb0r42 & (~0x50); + rfval = rfb0r42 | 0x40; + rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval); + + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002006); + udelay(1); + + bbpval = bbp1 & (~0x18); + bbpval = bbpval | 0x08; + rt2800_bbp_write(rt2x00dev, 1, bbpval); + + rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x01); + } + usleep_range(500, 1500); + + vga_idx = 0; + while (vga_idx < 11) { + rt2800_rfcsr_write_dccal(rt2x00dev, 3, rf_vga_table[vga_idx]); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, rf_vga_table[vga_idx]); + + rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x93); + + for (i = 0; i < 10000; i++) { + bbpval = rt2800_bbp_read(rt2x00dev, 159); + if ((bbpval & 0xff) == 0x93) + usleep_range(50, 100); + else + break; + } + + if ((bbpval & 0xff) == 0x93) { + rt2x00_warn(rt2x00dev, "Fatal Error: Calibration doesn't finish"); + goto restore_value; + } + for (i = 0; i < 5; i++) { + u32 bbptemp = 0; + u8 value = 0; + int result = 0; + + rt2800_bbp_write(rt2x00dev, 158, 0x1e); + rt2800_bbp_write(rt2x00dev, 159, i); + rt2800_bbp_write(rt2x00dev, 158, 0x22); + value = rt2800_bbp_read(rt2x00dev, 159); + bbptemp = bbptemp + (value << 24); + rt2800_bbp_write(rt2x00dev, 158, 0x21); + value = rt2800_bbp_read(rt2x00dev, 159); + bbptemp = bbptemp + (value << 16); + rt2800_bbp_write(rt2x00dev, 158, 0x20); + value = rt2800_bbp_read(rt2x00dev, 159); + bbptemp = bbptemp + (value << 8); + rt2800_bbp_write(rt2x00dev, 158, 0x1f); + value = rt2800_bbp_read(rt2x00dev, 159); + bbptemp = bbptemp + value; + + if (i < 2 && (bbptemp & 0x800000)) + result = (bbptemp & 0xffffff) - 0x1000000; + else + result = bbptemp; + + if (i == 0) + mi = result / 4096; + else if (i == 1) + mq = result / 4096; + else if (i == 2) + si = bbptemp / 4096; + else if (i == 3) + sq = bbptemp / 4096; + else + riq = result / 4096; + } + + bbpval1 = si - mi * mi; + rt2x00_dbg(rt2x00dev, + "RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d", + si, sq, riq, bbpval1, vga_idx); + + if (bbpval1 >= (100 * 100)) + break; + + if (bbpval1 <= 100) + vga_idx = vga_idx + 9; + else if (bbpval1 <= 158) + vga_idx = vga_idx + 8; + else if (bbpval1 <= 251) + vga_idx = vga_idx + 7; + else if (bbpval1 <= 398) + vga_idx = vga_idx + 6; + else if (bbpval1 <= 630) + vga_idx = vga_idx + 5; + else if (bbpval1 <= 1000) + vga_idx = vga_idx + 4; + else if (bbpval1 <= 1584) + vga_idx = vga_idx + 3; + else if (bbpval1 <= 2511) + vga_idx = vga_idx + 2; + else + vga_idx = vga_idx + 1; + } + + sigma_i = rt2800_do_sqrt_accumulation(100 * (si - mi * mi)); + sigma_q = rt2800_do_sqrt_accumulation(100 * (sq - mq * mq)); + r_iq = 10 * (riq - (mi * mq)); + + rt2x00_dbg(rt2x00dev, "Sigma_i=%d, Sigma_q=%d, R_iq=%d", sigma_i, sigma_q, r_iq); + + if (sigma_i <= 1400 && sigma_i >= 1000 && + (sigma_i - sigma_q) <= 112 && + (sigma_i - sigma_q) >= -112 && + mi <= 32 && mi >= -32 && + mq <= 32 && mq >= -32) { + r_iq = 10 * (riq - (mi * mq)); + rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", + sigma_i, sigma_q, r_iq); + + g_rx = (1000 * sigma_q) / sigma_i; + g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx); + ph_rx = (r_iq * 2292) / (sigma_i * sigma_q); + + if (ph_rx > 20 || ph_rx < -20) { + ph_rx = 0; + rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); + } + + if (g_imb > 12 || g_imb < -12) { + g_imb = 0; + rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); + } + } else { + g_imb = 0; + ph_rx = 0; + rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", + sigma_i, sigma_q, r_iq); + rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); + } + + if (ch_idx == 0) { + rt2800_bbp_write(rt2x00dev, 158, 0x37); + rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f); + rt2800_bbp_write(rt2x00dev, 158, 0x35); + rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f); + } else { + rt2800_bbp_write(rt2x00dev, 158, 0x55); + rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f); + rt2800_bbp_write(rt2x00dev, 158, 0x53); + rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f); + } + } + +restore_value: + rt2800_bbp_write(rt2x00dev, 158, 0x3); + bbpval = rt2800_bbp_read(rt2x00dev, 159); + rt2800_bbp_write(rt2x00dev, 159, (bbpval | 0x07)); + + rt2800_bbp_write(rt2x00dev, 158, 0x00); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + rt2800_bbp_write(rt2x00dev, 1, bbp1); + rt2800_bbp_write(rt2x00dev, 4, bbp4); + rt2800_bbp_write(rt2x00dev, 241, bbpr241); + rt2800_bbp_write(rt2x00dev, 242, bbpr242); + + rt2800_bbp_write(rt2x00dev, 244, 0x00); + bbpval = rt2800_bbp_read(rt2x00dev, 21); + bbpval |= 0x1; + rt2800_bbp_write(rt2x00dev, 21, bbpval); + usleep_range(10, 200); + bbpval &= 0xfe; + rt2800_bbp_write(rt2x00dev, 21, bbpval); + + rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfb0r1); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfb0r2); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42); + + rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, rfb4r0); + rt2800_rfcsr_write_bank(rt2x00dev, 4, 19, rfb4r19); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rfb5r3); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rfb5r4); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rfb5r17); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, rfb5r18); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, rfb5r19); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, rfb5r20); + + rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, rfb6r0); + rt2800_rfcsr_write_bank(rt2x00dev, 6, 19, rfb6r19); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, rfb7r3); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, rfb7r4); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, rfb7r17); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, rfb7r18); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, rfb7r19); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, rfb7r20); + + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006); + udelay(1); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); + udelay(1); + rt2800_register_write(rt2x00dev, RF_CONTROL0, orig_RF_CONTROL0); + udelay(1); + rt2800_register_write(rt2x00dev, RF_BYPASS0, orig_RF_BYPASS0); + rt2800_register_write(rt2x00dev, RF_CONTROL1, orig_RF_CONTROL1); + rt2800_register_write(rt2x00dev, RF_BYPASS1, orig_RF_BYPASS1); + rt2800_register_write(rt2x00dev, RF_CONTROL3, orig_RF_CONTROL3); + rt2800_register_write(rt2x00dev, RF_BYPASS3, orig_RF_BYPASS3); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); +} + +static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev, + struct rf_reg_pair rf_reg_record[][13], u8 chain) +{ + u8 rfvalue = 0; + + if (chain == CHAIN_0) { + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); + rf_reg_record[CHAIN_0][0].bank = 0; + rf_reg_record[CHAIN_0][0].reg = 1; + rf_reg_record[CHAIN_0][0].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); + rf_reg_record[CHAIN_0][1].bank = 0; + rf_reg_record[CHAIN_0][1].reg = 2; + rf_reg_record[CHAIN_0][1].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); + rf_reg_record[CHAIN_0][2].bank = 0; + rf_reg_record[CHAIN_0][2].reg = 35; + rf_reg_record[CHAIN_0][2].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); + rf_reg_record[CHAIN_0][3].bank = 0; + rf_reg_record[CHAIN_0][3].reg = 42; + rf_reg_record[CHAIN_0][3].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0); + rf_reg_record[CHAIN_0][4].bank = 4; + rf_reg_record[CHAIN_0][4].reg = 0; + rf_reg_record[CHAIN_0][4].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 2); + rf_reg_record[CHAIN_0][5].bank = 4; + rf_reg_record[CHAIN_0][5].reg = 2; + rf_reg_record[CHAIN_0][5].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 34); + rf_reg_record[CHAIN_0][6].bank = 4; + rf_reg_record[CHAIN_0][6].reg = 34; + rf_reg_record[CHAIN_0][6].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); + rf_reg_record[CHAIN_0][7].bank = 5; + rf_reg_record[CHAIN_0][7].reg = 3; + rf_reg_record[CHAIN_0][7].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); + rf_reg_record[CHAIN_0][8].bank = 5; + rf_reg_record[CHAIN_0][8].reg = 4; + rf_reg_record[CHAIN_0][8].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); + rf_reg_record[CHAIN_0][9].bank = 5; + rf_reg_record[CHAIN_0][9].reg = 17; + rf_reg_record[CHAIN_0][9].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); + rf_reg_record[CHAIN_0][10].bank = 5; + rf_reg_record[CHAIN_0][10].reg = 18; + rf_reg_record[CHAIN_0][10].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); + rf_reg_record[CHAIN_0][11].bank = 5; + rf_reg_record[CHAIN_0][11].reg = 19; + rf_reg_record[CHAIN_0][11].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); + rf_reg_record[CHAIN_0][12].bank = 5; + rf_reg_record[CHAIN_0][12].reg = 20; + rf_reg_record[CHAIN_0][12].value = rfvalue; + } else if (chain == CHAIN_1) { + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); + rf_reg_record[CHAIN_1][0].bank = 0; + rf_reg_record[CHAIN_1][0].reg = 1; + rf_reg_record[CHAIN_1][0].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); + rf_reg_record[CHAIN_1][1].bank = 0; + rf_reg_record[CHAIN_1][1].reg = 2; + rf_reg_record[CHAIN_1][1].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); + rf_reg_record[CHAIN_1][2].bank = 0; + rf_reg_record[CHAIN_1][2].reg = 35; + rf_reg_record[CHAIN_1][2].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); + rf_reg_record[CHAIN_1][3].bank = 0; + rf_reg_record[CHAIN_1][3].reg = 42; + rf_reg_record[CHAIN_1][3].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0); + rf_reg_record[CHAIN_1][4].bank = 6; + rf_reg_record[CHAIN_1][4].reg = 0; + rf_reg_record[CHAIN_1][4].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 2); + rf_reg_record[CHAIN_1][5].bank = 6; + rf_reg_record[CHAIN_1][5].reg = 2; + rf_reg_record[CHAIN_1][5].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 34); + rf_reg_record[CHAIN_1][6].bank = 6; + rf_reg_record[CHAIN_1][6].reg = 34; + rf_reg_record[CHAIN_1][6].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3); + rf_reg_record[CHAIN_1][7].bank = 7; + rf_reg_record[CHAIN_1][7].reg = 3; + rf_reg_record[CHAIN_1][7].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); + rf_reg_record[CHAIN_1][8].bank = 7; + rf_reg_record[CHAIN_1][8].reg = 4; + rf_reg_record[CHAIN_1][8].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17); + rf_reg_record[CHAIN_1][9].bank = 7; + rf_reg_record[CHAIN_1][9].reg = 17; + rf_reg_record[CHAIN_1][9].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18); + rf_reg_record[CHAIN_1][10].bank = 7; + rf_reg_record[CHAIN_1][10].reg = 18; + rf_reg_record[CHAIN_1][10].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19); + rf_reg_record[CHAIN_1][11].bank = 7; + rf_reg_record[CHAIN_1][11].reg = 19; + rf_reg_record[CHAIN_1][11].value = rfvalue; + rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20); + rf_reg_record[CHAIN_1][12].bank = 7; + rf_reg_record[CHAIN_1][12].reg = 20; + rf_reg_record[CHAIN_1][12].value = rfvalue; + } else { + rt2x00_warn(rt2x00dev, "Unknown chain = %u\n", chain); + } +} + +static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev, + struct rf_reg_pair rf_record[][13]) +{ + u8 chain_index = 0, record_index = 0; + u8 bank = 0, rf_register = 0, value = 0; + + for (chain_index = 0; chain_index < 2; chain_index++) { + for (record_index = 0; record_index < 13; record_index++) { + bank = rf_record[chain_index][record_index].bank; + rf_register = rf_record[chain_index][record_index].reg; + value = rf_record[chain_index][record_index].value; + rt2800_rfcsr_write_bank(rt2x00dev, bank, rf_register, value); + rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n", + bank, rf_register, value); + } + } +} + +static void rt2800_setbbptonegenerator(struct rt2x00_dev *rt2x00dev) +{ + rt2800_bbp_write(rt2x00dev, 158, 0xAA); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + + rt2800_bbp_write(rt2x00dev, 158, 0xAB); + rt2800_bbp_write(rt2x00dev, 159, 0x0A); + + rt2800_bbp_write(rt2x00dev, 158, 0xAC); + rt2800_bbp_write(rt2x00dev, 159, 0x3F); + + rt2800_bbp_write(rt2x00dev, 158, 0xAD); + rt2800_bbp_write(rt2x00dev, 159, 0x3F); + + rt2800_bbp_write(rt2x00dev, 244, 0x40); +} + +static u32 rt2800_do_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx, u8 read_neg) +{ + u32 macvalue = 0; + int fftout_i = 0, fftout_q = 0; + u32 ptmp = 0, pint = 0; + u8 bbp = 0; + u8 tidxi; + + rt2800_bbp_write(rt2x00dev, 158, 0x00); + rt2800_bbp_write(rt2x00dev, 159, 0x9b); + + bbp = 0x9b; + + while (bbp == 0x9b) { + usleep_range(10, 50); + bbp = rt2800_bbp_read(rt2x00dev, 159); + bbp = bbp & 0xff; + } + + rt2800_bbp_write(rt2x00dev, 158, 0xba); + rt2800_bbp_write(rt2x00dev, 159, tidx); + rt2800_bbp_write(rt2x00dev, 159, tidx); + rt2800_bbp_write(rt2x00dev, 159, tidx); + + macvalue = rt2800_register_read(rt2x00dev, 0x057C); + + fftout_i = (macvalue >> 16); + fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; + fftout_q = (macvalue & 0xffff); + fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; + ptmp = (fftout_i * fftout_i); + ptmp = ptmp + (fftout_q * fftout_q); + pint = ptmp; + rt2x00_dbg(rt2x00dev, "I = %d, Q = %d, power = %x\n", fftout_i, fftout_q, pint); + if (read_neg) { + pint = pint >> 1; + tidxi = 0x40 - tidx; + tidxi = tidxi & 0x3f; + + rt2800_bbp_write(rt2x00dev, 158, 0xba); + rt2800_bbp_write(rt2x00dev, 159, tidxi); + rt2800_bbp_write(rt2x00dev, 159, tidxi); + rt2800_bbp_write(rt2x00dev, 159, tidxi); + + macvalue = rt2800_register_read(rt2x00dev, 0x057C); + + fftout_i = (macvalue >> 16); + fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; + fftout_q = (macvalue & 0xffff); + fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; + ptmp = (fftout_i * fftout_i); + ptmp = ptmp + (fftout_q * fftout_q); + ptmp = ptmp >> 1; + pint = pint + ptmp; + } + + return pint; +} + +static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx) +{ + u32 macvalue = 0; + int fftout_i = 0, fftout_q = 0; + u32 ptmp = 0, pint = 0; + + rt2800_bbp_write(rt2x00dev, 158, 0xBA); + rt2800_bbp_write(rt2x00dev, 159, tidx); + rt2800_bbp_write(rt2x00dev, 159, tidx); + rt2800_bbp_write(rt2x00dev, 159, tidx); + + macvalue = rt2800_register_read(rt2x00dev, 0x057C); + + fftout_i = (macvalue >> 16); + fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; + fftout_q = (macvalue & 0xffff); + fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; + ptmp = (fftout_i * fftout_i); + ptmp = ptmp + (fftout_q * fftout_q); + pint = ptmp; + + return pint; +} + +static void rt2800_write_dc(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 alc, u8 iorq, u8 dc) +{ + u8 bbp = 0; + + rt2800_bbp_write(rt2x00dev, 158, 0xb0); + bbp = alc | 0x80; + rt2800_bbp_write(rt2x00dev, 159, bbp); + + if (ch_idx == 0) + bbp = (iorq == 0) ? 0xb1 : 0xb2; + else + bbp = (iorq == 0) ? 0xb8 : 0xb9; + + rt2800_bbp_write(rt2x00dev, 158, bbp); + bbp = dc; + rt2800_bbp_write(rt2x00dev, 159, bbp); +} + +static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, + u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2]) +{ + u32 p0 = 0, p1 = 0, pf = 0; + s8 idx0 = 0, idx1 = 0; + u8 idxf[] = {0x00, 0x00}; + u8 ibit = 0x20; + u8 iorq; + s8 bidx; + + rt2800_bbp_write(rt2x00dev, 158, 0xb0); + rt2800_bbp_write(rt2x00dev, 159, 0x80); + + for (bidx = 5; bidx >= 0; bidx--) { + for (iorq = 0; iorq <= 1; iorq++) { + if (idxf[iorq] == 0x20) { + idx0 = 0x20; + p0 = pf; + } else { + idx0 = idxf[iorq] - ibit; + idx0 = idx0 & 0x3F; + rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx0); + p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); + } + + idx1 = idxf[iorq] + (bidx == 5 ? 0 : ibit); + idx1 = idx1 & 0x3F; + rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx1); + p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); + + rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n", + alc_idx, iorq, idxf[iorq]); + rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x\n", + p0, p1, pf, idx0, idx1, ibit); + + if (bidx != 5 && pf <= p0 && pf < p1) { + idxf[iorq] = idxf[iorq]; + } else if (p0 < p1) { + pf = p0; + idxf[iorq] = idx0 & 0x3F; + } else { + pf = p1; + idxf[iorq] = idx1 & 0x3F; + } + rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n", + iorq, iorq, idxf[iorq], pf); + + rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idxf[iorq]); + } + ibit = ibit >> 1; + } + dc_result[ch_idx][alc_idx][0] = idxf[0]; + dc_result[ch_idx][alc_idx][1] = idxf[1]; +} + +static void rt2800_iq_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 *ges, u8 *pes) +{ + u32 p0 = 0, p1 = 0, pf = 0; + s8 perr = 0, gerr = 0, iq_err = 0; + s8 pef = 0, gef = 0; + s8 psta, pend; + s8 gsta, gend; + + u8 ibit = 0x20; + u8 first_search = 0x00, touch_neg_max = 0x00; + s8 idx0 = 0, idx1 = 0; + u8 gop; + u8 bbp = 0; + s8 bidx; + + for (bidx = 5; bidx >= 1; bidx--) { + for (gop = 0; gop < 2; gop++) { + if (gop == 1 || bidx < 4) { + if (gop == 0) + iq_err = gerr; + else + iq_err = perr; + + first_search = (gop == 0) ? (bidx == 3) : (bidx == 5); + touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) : + ((iq_err & 0x3F) == 0x20); + + if (touch_neg_max) { + p0 = pf; + idx0 = iq_err; + } else { + idx0 = iq_err - ibit; + bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29) : + ((gop == 0) ? 0x46 : 0x47); + + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, idx0); + + p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); + } + + idx1 = iq_err + (first_search ? 0 : ibit); + idx1 = (gop == 0) ? (idx1 & 0x0F) : (idx1 & 0x3F); + + bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : + (gop == 0) ? 0x46 : 0x47; + + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, idx1); + + p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); + + rt2x00_dbg(rt2x00dev, + "p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x\n", + p0, p1, pf, idx0, idx1, iq_err, gop, ibit); + + if (!(!first_search && pf <= p0 && pf < p1)) { + if (p0 < p1) { + pf = p0; + iq_err = idx0; + } else { + pf = p1; + iq_err = idx1; + } + } + + bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : + (gop == 0) ? 0x46 : 0x47; + + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, iq_err); + + if (gop == 0) + gerr = iq_err; + else + perr = iq_err; + + rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n", + pf, gerr & 0x0F, perr & 0x3F); + } + } + + if (bidx > 0) + ibit = (ibit >> 1); + } + gerr = (gerr & 0x08) ? (gerr & 0x0F) - 0x10 : (gerr & 0x0F); + perr = (perr & 0x20) ? (perr & 0x3F) - 0x40 : (perr & 0x3F); + + gerr = (gerr < -0x07) ? -0x07 : (gerr > 0x05) ? 0x05 : gerr; + gsta = gerr - 1; + gend = gerr + 2; + + perr = (perr < -0x1f) ? -0x1f : (perr > 0x1d) ? 0x1d : perr; + psta = perr - 1; + pend = perr + 2; + + for (gef = gsta; gef <= gend; gef = gef + 1) + for (pef = psta; pef <= pend; pef = pef + 1) { + bbp = (ch_idx == 0) ? 0x28 : 0x46; + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, gef & 0x0F); + + bbp = (ch_idx == 0) ? 0x29 : 0x47; + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, pef & 0x3F); + + p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); + if (gef == gsta && pef == psta) { + pf = p1; + gerr = gef; + perr = pef; + } else if (pf > p1) { + pf = p1; + gerr = gef; + perr = pef; + } + rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n", + p1, pf, gef & 0x0F, pef & 0x3F); + } + + ges[ch_idx] = gerr & 0x0F; + pes[ch_idx] = perr & 0x3F; +} + +static void rt2800_rf_aux_tx0_loopback(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x21); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x10); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x1b); + rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, 0x81); + rt2800_rfcsr_write_bank(rt2x00dev, 4, 2, 0x81); + rt2800_rfcsr_write_bank(rt2x00dev, 4, 34, 0xee); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, 0x2d); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x2d); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xd7); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0xa2); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20); +} + +static void rt2800_rf_aux_tx1_loopback(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x22); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x20); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x4b); + rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, 0x81); + rt2800_rfcsr_write_bank(rt2x00dev, 6, 2, 0x81); + rt2800_rfcsr_write_bank(rt2x00dev, 6, 34, 0xee); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, 0x2d); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, 0x2d); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, 0x80); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, 0xd7); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, 0xa2); + rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, 0x20); +} + +static void rt2800_loft_iq_calibration(struct rt2x00_dev *rt2x00dev) +{ + struct rf_reg_pair rf_store[CHAIN_NUM][13]; + u32 macorg1 = 0; + u32 macorg2 = 0; + u32 macorg3 = 0; + u32 macorg4 = 0; + u32 macorg5 = 0; + u32 orig528 = 0; + u32 orig52c = 0; + + u32 savemacsysctrl = 0; + u32 macvalue = 0; + u32 mac13b8 = 0; + u32 p0 = 0, p1 = 0; + u32 p0_idx10 = 0, p1_idx10 = 0; + + u8 rfvalue; + u8 loft_dc_search_result[CHAIN_NUM][RF_ALC_NUM][2]; + u8 ger[CHAIN_NUM], per[CHAIN_NUM]; + + u8 vga_gain[] = {14, 14}; + u8 bbp = 0, ch_idx = 0, rf_alc_idx = 0, idx = 0; + u8 bbpr30, rfb0r39, rfb0r42; + u8 bbpr1; + u8 bbpr4; + u8 bbpr241, bbpr242; + u8 count_step; + + static const u8 rf_gain[] = {0x00, 0x01, 0x02, 0x04, 0x08, 0x0c}; + static const u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, + 0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F}; + static const u8 bbp_2324gain[] = {0x16, 0x14, 0x12, 0x10, 0x0c, 0x08}; + + savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG); + macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0); + macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0); + macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3); + macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3); + mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8); + orig528 = rt2800_register_read(rt2x00dev, RF_CONTROL2); + orig52c = rt2800_register_read(rt2x00dev, RF_BYPASS2); + + macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + macvalue &= (~0x04); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) + rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n"); + + macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + macvalue &= (~0x08); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX))) + rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n"); + + for (ch_idx = 0; ch_idx < 2; ch_idx++) + rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx); + + bbpr30 = rt2800_bbp_read(rt2x00dev, 30); + rfb0r39 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 39); + rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); + + rt2800_bbp_write(rt2x00dev, 30, 0x1F); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, 0x80); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x5B); + + rt2800_bbp_write(rt2x00dev, 23, 0x00); + rt2800_bbp_write(rt2x00dev, 24, 0x00); + + rt2800_setbbptonegenerator(rt2x00dev); + + for (ch_idx = 0; ch_idx < 2; ch_idx++) { + rt2800_bbp_write(rt2x00dev, 23, 0x00); + rt2800_bbp_write(rt2x00dev, 24, 0x00); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306); + rt2800_register_write(rt2x00dev, 0x13b8, 0x10); + udelay(1); + + if (ch_idx == 0) + rt2800_rf_aux_tx0_loopback(rt2x00dev); + else + rt2800_rf_aux_tx1_loopback(rt2x00dev); + + udelay(1); + + if (ch_idx == 0) + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004); + else + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004); + + rt2800_bbp_write(rt2x00dev, 158, 0x05); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + + rt2800_bbp_write(rt2x00dev, 158, 0x01); + if (ch_idx == 0) + rt2800_bbp_write(rt2x00dev, 159, 0x00); + else + rt2800_bbp_write(rt2x00dev, 159, 0x01); + + vga_gain[ch_idx] = 18; + for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) { + rt2800_bbp_write(rt2x00dev, 23, bbp_2324gain[rf_alc_idx]); + rt2800_bbp_write(rt2x00dev, 24, bbp_2324gain[rf_alc_idx]); + + macvalue = rt2800_register_read(rt2x00dev, RF_CONTROL3); + macvalue &= (~0x0000F1F1); + macvalue |= (rf_gain[rf_alc_idx] << 4); + macvalue |= (rf_gain[rf_alc_idx] << 12); + rt2800_register_write(rt2x00dev, RF_CONTROL3, macvalue); + macvalue = (0x0000F1F1); + rt2800_register_write(rt2x00dev, RF_BYPASS3, macvalue); + + if (rf_alc_idx == 0) { + rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x21); + for (; vga_gain[ch_idx] > 0; + vga_gain[ch_idx] = vga_gain[ch_idx] - 2) { + rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; + rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); + rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00); + rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00); + p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); + rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x21); + p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); + rt2x00_dbg(rt2x00dev, "LOFT AGC %d %d\n", p0, p1); + if ((p0 < 7000 * 7000) && (p1 < (7000 * 7000))) + break; + } + + rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00); + rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00); + + rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx], + rfvga_gain_table[vga_gain[ch_idx]]); + + if (vga_gain[ch_idx] < 0) + vga_gain[ch_idx] = 0; + } + + rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; + + rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); + + rt2800_loft_search(rt2x00dev, ch_idx, rf_alc_idx, loft_dc_search_result); + } + } + + for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) { + for (idx = 0; idx < 4; idx++) { + rt2800_bbp_write(rt2x00dev, 158, 0xB0); + bbp = (idx << 2) + rf_alc_idx; + rt2800_bbp_write(rt2x00dev, 159, bbp); + rt2x00_dbg(rt2x00dev, " ALC %2x,", bbp); + + rt2800_bbp_write(rt2x00dev, 158, 0xb1); + bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x00]; + bbp = bbp & 0x3F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + rt2x00_dbg(rt2x00dev, " I0 %2x,", bbp); + + rt2800_bbp_write(rt2x00dev, 158, 0xb2); + bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x01]; + bbp = bbp & 0x3F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + rt2x00_dbg(rt2x00dev, " Q0 %2x,", bbp); + + rt2800_bbp_write(rt2x00dev, 158, 0xb8); + bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x00]; + bbp = bbp & 0x3F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + rt2x00_dbg(rt2x00dev, " I1 %2x,", bbp); + + rt2800_bbp_write(rt2x00dev, 158, 0xb9); + bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x01]; + bbp = bbp & 0x3F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + rt2x00_dbg(rt2x00dev, " Q1 %2x\n", bbp); + } + } + + rt2800_bbp_write(rt2x00dev, 23, 0x00); + rt2800_bbp_write(rt2x00dev, 24, 0x00); + + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); + + rt2800_bbp_write(rt2x00dev, 158, 0x00); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + + bbp = 0x00; + rt2800_bbp_write(rt2x00dev, 244, 0x00); + + rt2800_bbp_write(rt2x00dev, 21, 0x01); + udelay(1); + rt2800_bbp_write(rt2x00dev, 21, 0x00); + + rt2800_rf_configrecover(rt2x00dev, rf_store); + + rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00); + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00); + rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2); + udelay(1); + rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3); + rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4); + rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); + rt2800_register_write(rt2x00dev, RF_CONTROL2, orig528); + rt2800_register_write(rt2x00dev, RF_BYPASS2, orig52c); + rt2800_register_write(rt2x00dev, 0x13b8, mac13b8); + + savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG); + macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0); + macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0); + macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3); + macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3); + + bbpr1 = rt2800_bbp_read(rt2x00dev, 1); + bbpr4 = rt2800_bbp_read(rt2x00dev, 4); + bbpr241 = rt2800_bbp_read(rt2x00dev, 241); + bbpr242 = rt2800_bbp_read(rt2x00dev, 242); + mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8); + + macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + macvalue &= (~0x04); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) + rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n"); + + macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + macvalue &= (~0x08); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX))) + rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n"); + + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000101); + rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1); + } + + rt2800_bbp_write(rt2x00dev, 23, 0x00); + rt2800_bbp_write(rt2x00dev, 24, 0x00); + + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + rt2800_bbp_write(rt2x00dev, 4, bbpr4 & (~0x18)); + rt2800_bbp_write(rt2x00dev, 21, 0x01); + udelay(1); + rt2800_bbp_write(rt2x00dev, 21, 0x00); + + rt2800_bbp_write(rt2x00dev, 241, 0x14); + rt2800_bbp_write(rt2x00dev, 242, 0x80); + rt2800_bbp_write(rt2x00dev, 244, 0x31); + } else { + rt2800_setbbptonegenerator(rt2x00dev); + } + + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306); + udelay(1); + + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F); + + if (!test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000000); + rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1); + } + + rt2800_register_write(rt2x00dev, 0x13b8, 0x00000010); + + for (ch_idx = 0; ch_idx < 2; ch_idx++) + rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx); + + rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x3B); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x3B); + + rt2800_bbp_write(rt2x00dev, 158, 0x03); + rt2800_bbp_write(rt2x00dev, 159, 0x60); + rt2800_bbp_write(rt2x00dev, 158, 0xB0); + rt2800_bbp_write(rt2x00dev, 159, 0x80); + + for (ch_idx = 0; ch_idx < 2; ch_idx++) { + rt2800_bbp_write(rt2x00dev, 23, 0x00); + rt2800_bbp_write(rt2x00dev, 24, 0x00); + + if (ch_idx == 0) { + rt2800_bbp_write(rt2x00dev, 158, 0x01); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + bbp = bbpr1 & (~0x18); + bbp = bbp | 0x00; + rt2800_bbp_write(rt2x00dev, 1, bbp); + } + rt2800_rf_aux_tx0_loopback(rt2x00dev); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004); + } else { + rt2800_bbp_write(rt2x00dev, 158, 0x01); + rt2800_bbp_write(rt2x00dev, 159, 0x01); + if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) { + bbp = bbpr1 & (~0x18); + bbp = bbp | 0x08; + rt2800_bbp_write(rt2x00dev, 1, bbp); + } + rt2800_rf_aux_tx1_loopback(rt2x00dev); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004); + } + + rt2800_bbp_write(rt2x00dev, 158, 0x05); + rt2800_bbp_write(rt2x00dev, 159, 0x04); + + bbp = (ch_idx == 0) ? 0x28 : 0x46; + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + rt2800_bbp_write(rt2x00dev, 23, 0x06); + rt2800_bbp_write(rt2x00dev, 24, 0x06); + count_step = 1; + } else { + rt2800_bbp_write(rt2x00dev, 23, 0x1F); + rt2800_bbp_write(rt2x00dev, 24, 0x1F); + count_step = 2; + } + + for (; vga_gain[ch_idx] < 19; vga_gain[ch_idx] = (vga_gain[ch_idx] + count_step)) { + rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; + rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); + + bbp = (ch_idx == 0) ? 0x29 : 0x47; + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0); + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) + p0_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A); + + bbp = (ch_idx == 0) ? 0x29 : 0x47; + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, 0x21); + p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0); + if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) + p1_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A); + + rt2x00_dbg(rt2x00dev, "IQ AGC %d %d\n", p0, p1); + + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + rt2x00_dbg(rt2x00dev, "IQ AGC IDX 10 %d %d\n", p0_idx10, p1_idx10); + if ((p0_idx10 > 7000 * 7000) || (p1_idx10 > 7000 * 7000)) { + if (vga_gain[ch_idx] != 0) + vga_gain[ch_idx] = vga_gain[ch_idx] - 1; + break; + } + } + + if ((p0 > 2500 * 2500) || (p1 > 2500 * 2500)) + break; + } + + if (vga_gain[ch_idx] > 18) + vga_gain[ch_idx] = 18; + rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx], + rfvga_gain_table[vga_gain[ch_idx]]); + + bbp = (ch_idx == 0) ? 0x29 : 0x47; + rt2800_bbp_write(rt2x00dev, 158, bbp); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + + rt2800_iq_search(rt2x00dev, ch_idx, ger, per); + } + + rt2800_bbp_write(rt2x00dev, 23, 0x00); + rt2800_bbp_write(rt2x00dev, 24, 0x00); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); + + rt2800_bbp_write(rt2x00dev, 158, 0x28); + bbp = ger[CHAIN_0] & 0x0F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + + rt2800_bbp_write(rt2x00dev, 158, 0x29); + bbp = per[CHAIN_0] & 0x3F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + + rt2800_bbp_write(rt2x00dev, 158, 0x46); + bbp = ger[CHAIN_1] & 0x0F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + + rt2800_bbp_write(rt2x00dev, 158, 0x47); + bbp = per[CHAIN_1] & 0x3F; + rt2800_bbp_write(rt2x00dev, 159, bbp); + + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { + rt2800_bbp_write(rt2x00dev, 1, bbpr1); + rt2800_bbp_write(rt2x00dev, 241, bbpr241); + rt2800_bbp_write(rt2x00dev, 242, bbpr242); + } + rt2800_bbp_write(rt2x00dev, 244, 0x00); + + rt2800_bbp_write(rt2x00dev, 158, 0x00); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + rt2800_bbp_write(rt2x00dev, 158, 0xB0); + rt2800_bbp_write(rt2x00dev, 159, 0x00); + + rt2800_bbp_write(rt2x00dev, 30, bbpr30); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, rfb0r39); + rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42); + + if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) + rt2800_bbp_write(rt2x00dev, 4, bbpr4); + + rt2800_bbp_write(rt2x00dev, 21, 0x01); + udelay(1); + rt2800_bbp_write(rt2x00dev, 21, 0x00); + + rt2800_rf_configrecover(rt2x00dev, rf_store); + + rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1); + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00); + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00); + rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2); + udelay(1); + rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3); + rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4); + rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); + rt2800_register_write(rt2x00dev, 0x13b8, mac13b8); +} + +static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, + bool set_bw, bool is_ht40) +{ + u8 bbp_val; + + bbp_val = rt2800_bbp_read(rt2x00dev, 21); + bbp_val |= 0x1; + rt2800_bbp_write(rt2x00dev, 21, bbp_val); + usleep_range(100, 200); + + if (set_bw) { + bbp_val = rt2800_bbp_read(rt2x00dev, 4); + rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, 2 * is_ht40); + rt2800_bbp_write(rt2x00dev, 4, bbp_val); + usleep_range(100, 200); + } + + bbp_val = rt2800_bbp_read(rt2x00dev, 21); + bbp_val &= (~0x1); + rt2800_bbp_write(rt2x00dev, 21, bbp_val); + usleep_range(100, 200); +} + +static int rt2800_rf_lp_config(struct rt2x00_dev *rt2x00dev, bool btxcal) +{ + u8 rf_val; + + if (btxcal) + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); + else + rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x02); + + rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x06); + + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); + rf_val |= 0x80; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rf_val); + + if (btxcal) { + rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xC1); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x20); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); + rf_val &= (~0x3F); + rf_val |= 0x3F; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); + rf_val &= (~0x3F); + rf_val |= 0x3F; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, 0x31); + } else { + rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xF1); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x18); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); + rf_val &= (~0x3F); + rf_val |= 0x34; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); + rf_val &= (~0x3F); + rf_val |= 0x34; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val); + } + + return 0; +} + +static s8 rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev) +{ + unsigned int cnt; + u8 bbp_val; + s8 cal_val; + + rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82); + + cnt = 0; + do { + usleep_range(500, 2000); + bbp_val = rt2800_bbp_read(rt2x00dev, 159); + if (bbp_val == 0x02 || cnt == 20) + break; + + cnt++; + } while (cnt < 20); + + bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 0x39); + cal_val = bbp_val & 0x7F; + if (cal_val >= 0x40) + cal_val -= 128; + + return cal_val; +} + +static void rt2800_bw_filter_calibration(struct rt2x00_dev *rt2x00dev, + bool btxcal) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u8 tx_agc_fc = 0, rx_agc_fc = 0, cmm_agc_fc; + u8 filter_target; + u8 tx_filter_target_20m = 0x09, tx_filter_target_40m = 0x02; + u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31; + int loop = 0, is_ht40, cnt; + u8 bbp_val, rf_val; + s8 cal_r32_init, cal_r32_val, cal_diff; + u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05; + u8 saverfb5r06, saverfb5r07; + u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20; + u8 saverfb5r37, saverfb5r38, saverfb5r39, saverfb5r40, saverfb5r41; + u8 saverfb5r42, saverfb5r43, saverfb5r44, saverfb5r45, saverfb5r46; + u8 saverfb5r58, saverfb5r59; + u8 savebbp159r0, savebbp159r2, savebbpr23; + u32 MAC_RF_CONTROL0, MAC_RF_BYPASS0; + + /* Save MAC registers */ + MAC_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0); + MAC_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0); + + /* save BBP registers */ + savebbpr23 = rt2800_bbp_read(rt2x00dev, 23); + + savebbp159r0 = rt2800_bbp_dcoc_read(rt2x00dev, 0); + savebbp159r2 = rt2800_bbp_dcoc_read(rt2x00dev, 2); + + /* Save RF registers */ + saverfb5r00 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0); + saverfb5r01 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); + saverfb5r03 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); + saverfb5r04 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); + saverfb5r05 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 5); + saverfb5r06 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6); + saverfb5r07 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7); + saverfb5r08 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 8); + saverfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); + saverfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); + saverfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); + saverfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); + + saverfb5r37 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 37); + saverfb5r38 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 38); + saverfb5r39 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 39); + saverfb5r40 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 40); + saverfb5r41 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 41); + saverfb5r42 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 42); + saverfb5r43 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 43); + saverfb5r44 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 44); + saverfb5r45 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 45); + saverfb5r46 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 46); + + saverfb5r58 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58); + saverfb5r59 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59); + + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0); + rf_val |= 0x3; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val); + + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); + rf_val |= 0x1; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rf_val); + + cnt = 0; + do { + usleep_range(500, 2000); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); + if (((rf_val & 0x1) == 0x00) || (cnt == 40)) + break; + cnt++; + } while (cnt < 40); + + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0); + rf_val &= (~0x3); + rf_val |= 0x1; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val); + + /* I-3 */ + bbp_val = rt2800_bbp_read(rt2x00dev, 23); + bbp_val &= (~0x1F); + bbp_val |= 0x10; + rt2800_bbp_write(rt2x00dev, 23, bbp_val); + + do { + /* I-4,5,6,7,8,9 */ + if (loop == 0) { + is_ht40 = false; + + if (btxcal) + filter_target = tx_filter_target_20m; + else + filter_target = rx_filter_target_20m; + } else { + is_ht40 = true; + + if (btxcal) + filter_target = tx_filter_target_40m; + else + filter_target = rx_filter_target_40m; + } + + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 8); + rf_val &= (~0x04); + if (loop == 1) + rf_val |= 0x4; + + rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, rf_val); + + rt2800_bbp_core_soft_reset(rt2x00dev, true, is_ht40); + + rt2800_rf_lp_config(rt2x00dev, btxcal); + if (btxcal) { + tx_agc_fc = 0; + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58); + rf_val &= (~0x7F); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59); + rf_val &= (~0x7F); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val); + } else { + rx_agc_fc = 0; + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6); + rf_val &= (~0x7F); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7); + rf_val &= (~0x7F); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val); + } + + usleep_range(1000, 2000); + + bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 2); + bbp_val &= (~0x6); + rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val); + + rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40); + + cal_r32_init = rt2800_lp_tx_filter_bw_cal(rt2x00dev); + + bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 2); + bbp_val |= 0x6; + rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val); +do_cal: + if (btxcal) { + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58); + rf_val &= (~0x7F); + rf_val |= tx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59); + rf_val &= (~0x7F); + rf_val |= tx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val); + } else { + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6); + rf_val &= (~0x7F); + rf_val |= rx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val); + rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7); + rf_val &= (~0x7F); + rf_val |= rx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val); + } + + usleep_range(500, 1000); + + rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40); + + cal_r32_val = rt2800_lp_tx_filter_bw_cal(rt2x00dev); + + cal_diff = cal_r32_init - cal_r32_val; + + if (btxcal) + cmm_agc_fc = tx_agc_fc; + else + cmm_agc_fc = rx_agc_fc; + + if (((cal_diff > filter_target) && (cmm_agc_fc == 0)) || + ((cal_diff < filter_target) && (cmm_agc_fc == 0x3f))) { + if (btxcal) + tx_agc_fc = 0; + else + rx_agc_fc = 0; + } else if ((cal_diff <= filter_target) && (cmm_agc_fc < 0x3f)) { + if (btxcal) + tx_agc_fc++; + else + rx_agc_fc++; + goto do_cal; + } + + if (btxcal) { + if (loop == 0) + drv_data->tx_calibration_bw20 = tx_agc_fc; + else + drv_data->tx_calibration_bw40 = tx_agc_fc; + } else { + if (loop == 0) + drv_data->rx_calibration_bw20 = rx_agc_fc; + else + drv_data->rx_calibration_bw40 = rx_agc_fc; + } + + loop++; + } while (loop <= 1); + + rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, saverfb5r00); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, saverfb5r01); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, saverfb5r03); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r04); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, saverfb5r05); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, saverfb5r06); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, saverfb5r07); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, saverfb5r08); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20); + + rt2800_rfcsr_write_bank(rt2x00dev, 5, 37, saverfb5r37); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 38, saverfb5r38); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 39, saverfb5r39); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 40, saverfb5r40); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 41, saverfb5r41); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 42, saverfb5r42); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 43, saverfb5r43); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 44, saverfb5r44); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 45, saverfb5r45); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 46, saverfb5r46); + + rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, saverfb5r58); + rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, saverfb5r59); + + rt2800_bbp_write(rt2x00dev, 23, savebbpr23); + + rt2800_bbp_dcoc_write(rt2x00dev, 0, savebbp159r0); + rt2800_bbp_dcoc_write(rt2x00dev, 2, savebbp159r2); + + bbp_val = rt2800_bbp_read(rt2x00dev, 4); + rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, + 2 * test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)); + rt2800_bbp_write(rt2x00dev, 4, bbp_val); + + rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0); + rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0); +} + +static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev) +{ + /* Initialize RF central register to default value */ + rt2800_rfcsr_write(rt2x00dev, 0, 0x02); + rt2800_rfcsr_write(rt2x00dev, 1, 0x03); + rt2800_rfcsr_write(rt2x00dev, 2, 0x33); + rt2800_rfcsr_write(rt2x00dev, 3, 0xFF); + rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); + rt2800_rfcsr_write(rt2x00dev, 5, 0x40); + rt2800_rfcsr_write(rt2x00dev, 6, 0x00); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0x00); + rt2800_rfcsr_write(rt2x00dev, 9, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x00); + rt2800_rfcsr_write(rt2x00dev, 11, 0x00); + rt2800_rfcsr_write(rt2x00dev, 12, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x40); + rt2800_rfcsr_write(rt2x00dev, 15, 0x22); + rt2800_rfcsr_write(rt2x00dev, 16, 0x4C); + rt2800_rfcsr_write(rt2x00dev, 17, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x00); + rt2800_rfcsr_write(rt2x00dev, 19, 0x00); + rt2800_rfcsr_write(rt2x00dev, 20, 0xA0); + rt2800_rfcsr_write(rt2x00dev, 21, 0x12); + rt2800_rfcsr_write(rt2x00dev, 22, 0x07); + rt2800_rfcsr_write(rt2x00dev, 23, 0x13); + rt2800_rfcsr_write(rt2x00dev, 24, 0xFE); + rt2800_rfcsr_write(rt2x00dev, 25, 0x24); + rt2800_rfcsr_write(rt2x00dev, 26, 0x7A); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x05); + rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 31, 0x00); + rt2800_rfcsr_write(rt2x00dev, 32, 0x00); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x00); + rt2800_rfcsr_write(rt2x00dev, 35, 0x00); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x00); + rt2800_rfcsr_write(rt2x00dev, 38, 0x00); + rt2800_rfcsr_write(rt2x00dev, 39, 0x00); + rt2800_rfcsr_write(rt2x00dev, 40, 0x00); + rt2800_rfcsr_write(rt2x00dev, 41, 0xD0); + rt2800_rfcsr_write(rt2x00dev, 42, 0x5B); + rt2800_rfcsr_write(rt2x00dev, 43, 0x00); + + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + if (rt2800_clk_is_20mhz(rt2x00dev)) + rt2800_rfcsr_write(rt2x00dev, 13, 0x03); + else + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x7C); + rt2800_rfcsr_write(rt2x00dev, 16, 0x80); + rt2800_rfcsr_write(rt2x00dev, 17, 0x99); + rt2800_rfcsr_write(rt2x00dev, 18, 0x99); + rt2800_rfcsr_write(rt2x00dev, 19, 0x09); + rt2800_rfcsr_write(rt2x00dev, 20, 0x50); + rt2800_rfcsr_write(rt2x00dev, 21, 0xB0); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x06); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + rt2800_rfcsr_write(rt2x00dev, 25, 0x00); + rt2800_rfcsr_write(rt2x00dev, 26, 0x5D); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x61); + rt2800_rfcsr_write(rt2x00dev, 29, 0xB5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x02); + + rt2800_rfcsr_write(rt2x00dev, 28, 0x62); + rt2800_rfcsr_write(rt2x00dev, 29, 0xAD); + rt2800_rfcsr_write(rt2x00dev, 39, 0x80); + + /* Initialize RF channel register to default value */ + rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03); + rt2800_rfcsr_write_chanreg(rt2x00dev, 1, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 2, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 3, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 5, 0x08); + rt2800_rfcsr_write_chanreg(rt2x00dev, 6, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 7, 0x51); + rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x53); + rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x16); + rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x61); + rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53); + rt2800_rfcsr_write_chanreg(rt2x00dev, 12, 0x22); + rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D); + rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06); + rt2800_rfcsr_write_chanreg(rt2x00dev, 15, 0x13); + rt2800_rfcsr_write_chanreg(rt2x00dev, 16, 0x22); + rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x27); + rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x02); + rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7); + rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x01); + rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x52); + rt2800_rfcsr_write_chanreg(rt2x00dev, 22, 0x80); + rt2800_rfcsr_write_chanreg(rt2x00dev, 23, 0xB3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 24, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 25, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x5C); + rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0x6B); + rt2800_rfcsr_write_chanreg(rt2x00dev, 30, 0x6B); + rt2800_rfcsr_write_chanreg(rt2x00dev, 31, 0x31); + rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x5D); + rt2800_rfcsr_write_chanreg(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xE6); + rt2800_rfcsr_write_chanreg(rt2x00dev, 35, 0x55); + rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 37, 0xBB); + rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 39, 0xB3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 40, 0x03); + rt2800_rfcsr_write_chanreg(rt2x00dev, 41, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 42, 0x00); + rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xB3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xD3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5); + rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x07); + rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x68); + rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xEF); + rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1C); + rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x07); + rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xA8); + rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0x85); + rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x10); + rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x07); + rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6A); + rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0x85); + rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x10); + rt2800_rfcsr_write_chanreg(rt2x00dev, 62, 0x1C); + rt2800_rfcsr_write_chanreg(rt2x00dev, 63, 0x00); + + rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5); + + rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x47); + rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x71); + rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x33); + rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x0E); + rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x23); + rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA4); + rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x02); + rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x12); + rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x1C); + rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0xEB); + rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x7D); + rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xD6); + rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x08); + rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB4); + rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xB3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5); + rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27); + rt2800_rfcsr_write_bank(rt2x00dev, 4, 47, 0x67); + rt2800_rfcsr_write_bank(rt2x00dev, 6, 47, 0x69); + rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFF); + rt2800_rfcsr_write_bank(rt2x00dev, 4, 54, 0x27); + rt2800_rfcsr_write_bank(rt2x00dev, 6, 54, 0x20); + rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66); + rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xFF); + rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x1C); + rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x20); + rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B); + rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xF7); + rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x09); + + rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x51); + rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06); + rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7); + rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x2C); + rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x64); + rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x51); + rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x36); + rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53); + rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x16); + + rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x6C); + rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFC); + rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1F); + rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27); + rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66); + rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B); + + /* Initialize RF channel register for DRQFN */ + rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xE3); + rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xE5); + rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x28); + rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x68); + rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xF7); + rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x02); + rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xC7); + + /* Initialize RF DC calibration register to default value */ + rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47); + rt2800_rfcsr_write_dccal(rt2x00dev, 1, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 2, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10); + rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10); + rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04); + rt2800_rfcsr_write_dccal(rt2x00dev, 9, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 10, 0x07); + rt2800_rfcsr_write_dccal(rt2x00dev, 11, 0x01); + rt2800_rfcsr_write_dccal(rt2x00dev, 12, 0x07); + rt2800_rfcsr_write_dccal(rt2x00dev, 13, 0x07); + rt2800_rfcsr_write_dccal(rt2x00dev, 14, 0x07); + rt2800_rfcsr_write_dccal(rt2x00dev, 15, 0x20); + rt2800_rfcsr_write_dccal(rt2x00dev, 16, 0x22); + rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 21, 0xF1); + rt2800_rfcsr_write_dccal(rt2x00dev, 22, 0x11); + rt2800_rfcsr_write_dccal(rt2x00dev, 23, 0x02); + rt2800_rfcsr_write_dccal(rt2x00dev, 24, 0x41); + rt2800_rfcsr_write_dccal(rt2x00dev, 25, 0x20); + rt2800_rfcsr_write_dccal(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 27, 0xD7); + rt2800_rfcsr_write_dccal(rt2x00dev, 28, 0xA2); + rt2800_rfcsr_write_dccal(rt2x00dev, 29, 0x20); + rt2800_rfcsr_write_dccal(rt2x00dev, 30, 0x49); + rt2800_rfcsr_write_dccal(rt2x00dev, 31, 0x20); + rt2800_rfcsr_write_dccal(rt2x00dev, 32, 0x04); + rt2800_rfcsr_write_dccal(rt2x00dev, 33, 0xF1); + rt2800_rfcsr_write_dccal(rt2x00dev, 34, 0xA1); + rt2800_rfcsr_write_dccal(rt2x00dev, 35, 0x01); + rt2800_rfcsr_write_dccal(rt2x00dev, 41, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 42, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 43, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 44, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 45, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 46, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 47, 0x3E); + rt2800_rfcsr_write_dccal(rt2x00dev, 48, 0x3D); + rt2800_rfcsr_write_dccal(rt2x00dev, 49, 0x3E); + rt2800_rfcsr_write_dccal(rt2x00dev, 50, 0x3D); + rt2800_rfcsr_write_dccal(rt2x00dev, 51, 0x3E); + rt2800_rfcsr_write_dccal(rt2x00dev, 52, 0x3D); + rt2800_rfcsr_write_dccal(rt2x00dev, 53, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 54, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 55, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 56, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 57, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10); + rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10); + rt2800_rfcsr_write_dccal(rt2x00dev, 60, 0x0A); + rt2800_rfcsr_write_dccal(rt2x00dev, 61, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00); + + rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x08); + rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x04); + rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x20); + + rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C); + + rt2800_r_calibration(rt2x00dev); + rt2800_rf_self_txdc_cal(rt2x00dev); + rt2800_rxdcoc_calibration(rt2x00dev); + rt2800_bw_filter_calibration(rt2x00dev, true); + rt2800_bw_filter_calibration(rt2x00dev, false); + rt2800_loft_iq_calibration(rt2x00dev); + rt2800_rxiq_calibration(rt2x00dev); +} + +static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) +{ + if (rt2800_is_305x_soc(rt2x00dev)) { + rt2800_init_rfcsr_305x_soc(rt2x00dev); + return; + } + + switch (rt2x00dev->chip.rt) { + case RT3070: + case RT3071: + case RT3090: + rt2800_init_rfcsr_30xx(rt2x00dev); + break; + case RT3290: + rt2800_init_rfcsr_3290(rt2x00dev); + break; + case RT3352: + rt2800_init_rfcsr_3352(rt2x00dev); + break; + case RT3390: + rt2800_init_rfcsr_3390(rt2x00dev); + break; + case RT3883: + rt2800_init_rfcsr_3883(rt2x00dev); + break; + case RT3572: + rt2800_init_rfcsr_3572(rt2x00dev); + break; + case RT3593: + rt2800_init_rfcsr_3593(rt2x00dev); + break; + case RT5350: + rt2800_init_rfcsr_5350(rt2x00dev); + break; + case RT5390: + rt2800_init_rfcsr_5390(rt2x00dev); + break; + case RT5392: + rt2800_init_rfcsr_5392(rt2x00dev); + break; + case RT5592: + rt2800_init_rfcsr_5592(rt2x00dev); + break; + case RT6352: + rt2800_init_rfcsr_6352(rt2x00dev); + break; + } +} + +int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 word; + + /* + * Initialize MAC registers. + */ + if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || + rt2800_init_registers(rt2x00dev))) + return -EIO; + + /* + * Wait BBP/RF to wake up. + */ + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) + return -EIO; + + /* + * Send signal during boot time to initialize firmware. + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + if (rt2x00_is_usb(rt2x00dev)) + rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + msleep(1); + + /* + * Make sure BBP is up and running. + */ + if (unlikely(rt2800_wait_bbp_ready(rt2x00dev))) + return -EIO; + + /* + * Initialize BBP/RF registers. + */ + rt2800_init_bbp(rt2x00dev); + rt2800_init_rfcsr(rt2x00dev); + + if (rt2x00_is_usb(rt2x00dev) && + (rt2x00_rt(rt2x00dev, RT3070) || + rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3572))) { + udelay(200); + rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); + udelay(10); + } + + /* + * Enable RX. + */ + reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + udelay(50); + + reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + /* + * Initialize LED control + */ + word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_AG_CONF); + rt2800_mcu_request(rt2x00dev, MCU_LED_AG_CONF, 0xff, + word & 0xff, (word >> 8) & 0xff); + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_ACT_CONF); + rt2800_mcu_request(rt2x00dev, MCU_LED_ACT_CONF, 0xff, + word & 0xff, (word >> 8) & 0xff); + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_POLARITY); + rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff, + word & 0xff, (word >> 8) & 0xff); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_enable_radio); + +void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_disable_wpdma(rt2x00dev); + + /* Wait for DMA, ignore error */ + rt2800_wait_wpdma_ready(rt2x00dev); + + reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 0); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); +} +EXPORT_SYMBOL_GPL(rt2800_disable_radio); + +int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 efuse_ctrl_reg; + + if (rt2x00_rt(rt2x00dev, RT3290)) + efuse_ctrl_reg = EFUSE_CTRL_3290; + else + efuse_ctrl_reg = EFUSE_CTRL; + + reg = rt2800_register_read(rt2x00dev, efuse_ctrl_reg); + return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT); +} +EXPORT_SYMBOL_GPL(rt2800_efuse_detect); + +static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) +{ + u32 reg; + u16 efuse_ctrl_reg; + u16 efuse_data0_reg; + u16 efuse_data1_reg; + u16 efuse_data2_reg; + u16 efuse_data3_reg; + + if (rt2x00_rt(rt2x00dev, RT3290)) { + efuse_ctrl_reg = EFUSE_CTRL_3290; + efuse_data0_reg = EFUSE_DATA0_3290; + efuse_data1_reg = EFUSE_DATA1_3290; + efuse_data2_reg = EFUSE_DATA2_3290; + efuse_data3_reg = EFUSE_DATA3_3290; + } else { + efuse_ctrl_reg = EFUSE_CTRL; + efuse_data0_reg = EFUSE_DATA0; + efuse_data1_reg = EFUSE_DATA1; + efuse_data2_reg = EFUSE_DATA2; + efuse_data3_reg = EFUSE_DATA3; + } + mutex_lock(&rt2x00dev->csr_mutex); + + reg = rt2800_register_read_lock(rt2x00dev, efuse_ctrl_reg); + rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); + rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); + rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); + rt2800_register_write_lock(rt2x00dev, efuse_ctrl_reg, reg); + + /* Wait until the EEPROM has been loaded */ + rt2800_regbusy_read(rt2x00dev, efuse_ctrl_reg, EFUSE_CTRL_KICK, ®); + /* Apparently the data is read from end to start */ + reg = rt2800_register_read_lock(rt2x00dev, efuse_data3_reg); + /* The returned value is in CPU order, but eeprom is le */ + *(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg); + reg = rt2800_register_read_lock(rt2x00dev, efuse_data2_reg); + *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg); + reg = rt2800_register_read_lock(rt2x00dev, efuse_data1_reg); + *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg); + reg = rt2800_register_read_lock(rt2x00dev, efuse_data0_reg); + *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + + for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) + rt2800_efuse_read(rt2x00dev, i); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); + +static u8 rt2800_get_txmixer_gain_24g(struct rt2x00_dev *rt2x00dev) +{ + u16 word; + + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + return 0; + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG); + if ((word & 0x00ff) != 0x00ff) + return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL); + + return 0; +} + +static u8 rt2800_get_txmixer_gain_5g(struct rt2x00_dev *rt2x00dev) +{ + u16 word; + + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + return 0; + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A); + if ((word & 0x00ff) != 0x00ff) + return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL); + + return 0; +} + +static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + u16 word; + u8 *mac; + u8 default_lna_gain; + int retval; + + /* + * Read the EEPROM. + */ + retval = rt2800_read_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Start validation of the data that has been read. + */ + mac = rt2800_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + rt2x00lib_set_mac_address(rt2x00dev, mac); + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2); + rt2x00_set_field16(&word, EEPROM_NIC_CONF0_TXPATH, 1); + rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820); + rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word); + rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); + } else if (rt2x00_rt(rt2x00dev, RT2860) || + rt2x00_rt(rt2x00dev, RT2872)) { + /* + * There is a max of 2 RX streams for RT28x0 series + */ + if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2) + rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2); + rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word); + } + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_CARDBUS_ACCEL, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_2G, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_5G, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_WPS_PBC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_2G, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_5G, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_ANT_DIVERSITY, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0); + rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF1, word); + rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word); + } + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ); + if ((word & 0x00ff) == 0x00ff) { + rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); + rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word); + rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word); + } + if ((word & 0xff00) == 0xff00) { + rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, + LED_MODE_TXRX_ACTIVITY); + rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); + rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word); + rt2800_eeprom_write(rt2x00dev, EEPROM_LED_AG_CONF, 0x5555); + rt2800_eeprom_write(rt2x00dev, EEPROM_LED_ACT_CONF, 0x2221); + rt2800_eeprom_write(rt2x00dev, EEPROM_LED_POLARITY, 0xa9f8); + rt2x00_eeprom_dbg(rt2x00dev, "Led Mode: 0x%04x\n", word); + } + + /* + * During the LNA validation we are going to use + * lna0 as correct value. Note that EEPROM_LNA + * is never validated. + */ + word = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA); + default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); + rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); + + drv_data->txmixer_gain_24g = rt2800_get_txmixer_gain_24g(rt2x00dev); + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); + if (!rt2x00_rt(rt2x00dev, RT3593) && + !rt2x00_rt(rt2x00dev, RT3883)) { + if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, + default_lna_gain); + } + rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); + + drv_data->txmixer_gain_5g = rt2800_get_txmixer_gain_5g(rt2x00dev); + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); + rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); + if (!rt2x00_rt(rt2x00dev, RT3593) && + !rt2x00_rt(rt2x00dev, RT3883)) { + if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, + default_lna_gain); + } + rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) { + word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); + if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 || + rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff) + rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1, + default_lna_gain); + if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0x00 || + rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0xff) + rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1, + default_lna_gain); + rt2800_eeprom_write(rt2x00dev, EEPROM_EXT_LNA2, word); + } + + return 0; +} + +static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u16 value; + u16 eeprom; + u16 rf; + + /* + * Read EEPROM word for configuration. + */ + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0); + + /* + * Identify RF chipset by EEPROM value + * RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field + * RT53xx: defined in "EEPROM_CHIP_ID" field + */ + if (rt2x00_rt(rt2x00dev, RT3290) || + rt2x00_rt(rt2x00dev, RT5390) || + rt2x00_rt(rt2x00dev, RT5392) || + rt2x00_rt(rt2x00dev, RT6352)) + rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID); + else if (rt2x00_rt(rt2x00dev, RT3352)) + rf = RF3322; + else if (rt2x00_rt(rt2x00dev, RT3883)) + rf = RF3853; + else if (rt2x00_rt(rt2x00dev, RT5350)) + rf = RF5350; + else if (rt2x00_rt(rt2x00dev, RT5592)) + rf = RF5592; + else + rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE); + + switch (rf) { + case RF2820: + case RF2850: + case RF2720: + case RF2750: + case RF3020: + case RF2020: + case RF3021: + case RF3022: + case RF3052: + case RF3053: + case RF3070: + case RF3290: + case RF3320: + case RF3322: + case RF3853: + case RF5350: + case RF5360: + case RF5362: + case RF5370: + case RF5372: + case RF5390: + case RF5392: + case RF5592: + case RF7620: + break; + default: + rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n", + rf); + return -ENODEV; + } + + rt2x00_set_rf(rt2x00dev, rf); + + /* + * Identify default antenna configuration. + */ + rt2x00dev->default_ant.tx_chain_num = + rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH); + rt2x00dev->default_ant.rx_chain_num = + rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH); + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + + if (rt2x00_rt(rt2x00dev, RT3070) || + rt2x00_rt(rt2x00dev, RT3090) || + rt2x00_rt(rt2x00dev, RT3352) || + rt2x00_rt(rt2x00dev, RT3390)) { + value = rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF1_ANT_DIVERSITY); + switch (value) { + case 0: + case 1: + case 2: + rt2x00dev->default_ant.tx = ANTENNA_A; + rt2x00dev->default_ant.rx = ANTENNA_A; + break; + case 3: + rt2x00dev->default_ant.tx = ANTENNA_A; + rt2x00dev->default_ant.rx = ANTENNA_B; + break; + } + } else { + rt2x00dev->default_ant.tx = ANTENNA_A; + rt2x00dev->default_ant.rx = ANTENNA_A; + } + + /* These chips have hardware RX antenna diversity */ + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R) || + rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5370G)) { + rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; /* Unused */ + rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; /* Unused */ + } + + /* + * Determine external LNA informations. + */ + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G)) + __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G)) + __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); + + /* + * Detect if this device has an hardware controlled radio. + */ + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO)) + __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); + + /* + * Detect if this device has Bluetooth co-existence. + */ + if (!rt2x00_rt(rt2x00dev, RT3352) && + rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) + __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags); + + /* + * Read frequency offset and RF programming sequence. + */ + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ); + rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); + + /* + * Store led settings, for correct led behaviour. + */ +#ifdef CONFIG_RT2X00_LIB_LEDS + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + + rt2x00dev->led_mcu_reg = eeprom; +#endif /* CONFIG_RT2X00_LIB_LEDS */ + + /* + * Check if support EIRP tx power limit feature. + */ + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER); + + if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) < + EIRP_MAX_TX_POWER_LIMIT) + __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags); + + /* + * Detect if device uses internal or external PA + */ + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + + if (rt2x00_rt(rt2x00dev, RT3352) || + rt2x00_rt(rt2x00dev, RT6352)) { + if (rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352)) + __set_bit(CAPABILITY_EXTERNAL_PA_TX0, + &rt2x00dev->cap_flags); + if (rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352)) + __set_bit(CAPABILITY_EXTERNAL_PA_TX1, + &rt2x00dev->cap_flags); + } + + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2); + + if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) { + if (!rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF2_EXTERNAL_PA)) { + __clear_bit(CAPABILITY_EXTERNAL_PA_TX0, + &rt2x00dev->cap_flags); + __clear_bit(CAPABILITY_EXTERNAL_PA_TX1, + &rt2x00dev->cap_flags); + } + } + + return 0; +} + +/* + * RF value list for rt28xx + * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) + */ +static const struct rf_channel rf_vals[] = { + { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, + { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, + { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, + { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, + { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, + { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, + { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, + { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, + { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, + { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, + { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, + { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, + { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, + { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, + { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, + { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, + { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, + { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, + { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, + { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, + { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, + { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, + { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, + { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, + { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, + + /* 802.11 HyperLan 2 */ + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, + { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, + { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, + { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, + { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, + { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, + { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, + { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, + { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, + { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, + { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, + { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, + + /* 802.11 UNII */ + { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, + { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, + { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, + { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, + { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, + { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, + { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, + { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, + { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, + { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, + { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, + + /* 802.11 Japan */ + { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, + { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, + { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, + { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, + { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, + { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, + { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, +}; + +/* + * RF value list for rt3xxx + * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053) + */ +static const struct rf_channel rf_vals_3x[] = { + {1, 241, 2, 2 }, + {2, 241, 2, 7 }, + {3, 242, 2, 2 }, + {4, 242, 2, 7 }, + {5, 243, 2, 2 }, + {6, 243, 2, 7 }, + {7, 244, 2, 2 }, + {8, 244, 2, 7 }, + {9, 245, 2, 2 }, + {10, 245, 2, 7 }, + {11, 246, 2, 2 }, + {12, 246, 2, 7 }, + {13, 247, 2, 2 }, + {14, 248, 2, 4 }, + + /* 802.11 UNI / HyperLan 2 */ + {36, 0x56, 0, 4}, + {38, 0x56, 0, 6}, + {40, 0x56, 0, 8}, + {44, 0x57, 0, 0}, + {46, 0x57, 0, 2}, + {48, 0x57, 0, 4}, + {52, 0x57, 0, 8}, + {54, 0x57, 0, 10}, + {56, 0x58, 0, 0}, + {60, 0x58, 0, 4}, + {62, 0x58, 0, 6}, + {64, 0x58, 0, 8}, + + /* 802.11 HyperLan 2 */ + {100, 0x5b, 0, 8}, + {102, 0x5b, 0, 10}, + {104, 0x5c, 0, 0}, + {108, 0x5c, 0, 4}, + {110, 0x5c, 0, 6}, + {112, 0x5c, 0, 8}, + {116, 0x5d, 0, 0}, + {118, 0x5d, 0, 2}, + {120, 0x5d, 0, 4}, + {124, 0x5d, 0, 8}, + {126, 0x5d, 0, 10}, + {128, 0x5e, 0, 0}, + {132, 0x5e, 0, 4}, + {134, 0x5e, 0, 6}, + {136, 0x5e, 0, 8}, + {140, 0x5f, 0, 0}, + + /* 802.11 UNII */ + {149, 0x5f, 0, 9}, + {151, 0x5f, 0, 11}, + {153, 0x60, 0, 1}, + {157, 0x60, 0, 5}, + {159, 0x60, 0, 7}, + {161, 0x60, 0, 9}, + {165, 0x61, 0, 1}, + {167, 0x61, 0, 3}, + {169, 0x61, 0, 5}, + {171, 0x61, 0, 7}, + {173, 0x61, 0, 9}, +}; + +/* + * RF value list for rt3xxx with Xtal20MHz + * Supports: 2.4 GHz (all) (RF3322) + */ +static const struct rf_channel rf_vals_3x_xtal20[] = { + {1, 0xE2, 2, 0x14}, + {2, 0xE3, 2, 0x14}, + {3, 0xE4, 2, 0x14}, + {4, 0xE5, 2, 0x14}, + {5, 0xE6, 2, 0x14}, + {6, 0xE7, 2, 0x14}, + {7, 0xE8, 2, 0x14}, + {8, 0xE9, 2, 0x14}, + {9, 0xEA, 2, 0x14}, + {10, 0xEB, 2, 0x14}, + {11, 0xEC, 2, 0x14}, + {12, 0xED, 2, 0x14}, + {13, 0xEE, 2, 0x14}, + {14, 0xF0, 2, 0x18}, +}; + +static const struct rf_channel rf_vals_3853[] = { + {1, 241, 6, 2}, + {2, 241, 6, 7}, + {3, 242, 6, 2}, + {4, 242, 6, 7}, + {5, 243, 6, 2}, + {6, 243, 6, 7}, + {7, 244, 6, 2}, + {8, 244, 6, 7}, + {9, 245, 6, 2}, + {10, 245, 6, 7}, + {11, 246, 6, 2}, + {12, 246, 6, 7}, + {13, 247, 6, 2}, + {14, 248, 6, 4}, + + {36, 0x56, 8, 4}, + {38, 0x56, 8, 6}, + {40, 0x56, 8, 8}, + {44, 0x57, 8, 0}, + {46, 0x57, 8, 2}, + {48, 0x57, 8, 4}, + {52, 0x57, 8, 8}, + {54, 0x57, 8, 10}, + {56, 0x58, 8, 0}, + {60, 0x58, 8, 4}, + {62, 0x58, 8, 6}, + {64, 0x58, 8, 8}, + + {100, 0x5b, 8, 8}, + {102, 0x5b, 8, 10}, + {104, 0x5c, 8, 0}, + {108, 0x5c, 8, 4}, + {110, 0x5c, 8, 6}, + {112, 0x5c, 8, 8}, + {114, 0x5c, 8, 10}, + {116, 0x5d, 8, 0}, + {118, 0x5d, 8, 2}, + {120, 0x5d, 8, 4}, + {124, 0x5d, 8, 8}, + {126, 0x5d, 8, 10}, + {128, 0x5e, 8, 0}, + {132, 0x5e, 8, 4}, + {134, 0x5e, 8, 6}, + {136, 0x5e, 8, 8}, + {140, 0x5f, 8, 0}, + + {149, 0x5f, 8, 9}, + {151, 0x5f, 8, 11}, + {153, 0x60, 8, 1}, + {157, 0x60, 8, 5}, + {159, 0x60, 8, 7}, + {161, 0x60, 8, 9}, + {165, 0x61, 8, 1}, + {167, 0x61, 8, 3}, + {169, 0x61, 8, 5}, + {171, 0x61, 8, 7}, + {173, 0x61, 8, 9}, +}; + +static const struct rf_channel rf_vals_5592_xtal20[] = { + /* Channel, N, K, mod, R */ + {1, 482, 4, 10, 3}, + {2, 483, 4, 10, 3}, + {3, 484, 4, 10, 3}, + {4, 485, 4, 10, 3}, + {5, 486, 4, 10, 3}, + {6, 487, 4, 10, 3}, + {7, 488, 4, 10, 3}, + {8, 489, 4, 10, 3}, + {9, 490, 4, 10, 3}, + {10, 491, 4, 10, 3}, + {11, 492, 4, 10, 3}, + {12, 493, 4, 10, 3}, + {13, 494, 4, 10, 3}, + {14, 496, 8, 10, 3}, + {36, 172, 8, 12, 1}, + {38, 173, 0, 12, 1}, + {40, 173, 4, 12, 1}, + {42, 173, 8, 12, 1}, + {44, 174, 0, 12, 1}, + {46, 174, 4, 12, 1}, + {48, 174, 8, 12, 1}, + {50, 175, 0, 12, 1}, + {52, 175, 4, 12, 1}, + {54, 175, 8, 12, 1}, + {56, 176, 0, 12, 1}, + {58, 176, 4, 12, 1}, + {60, 176, 8, 12, 1}, + {62, 177, 0, 12, 1}, + {64, 177, 4, 12, 1}, + {100, 183, 4, 12, 1}, + {102, 183, 8, 12, 1}, + {104, 184, 0, 12, 1}, + {106, 184, 4, 12, 1}, + {108, 184, 8, 12, 1}, + {110, 185, 0, 12, 1}, + {112, 185, 4, 12, 1}, + {114, 185, 8, 12, 1}, + {116, 186, 0, 12, 1}, + {118, 186, 4, 12, 1}, + {120, 186, 8, 12, 1}, + {122, 187, 0, 12, 1}, + {124, 187, 4, 12, 1}, + {126, 187, 8, 12, 1}, + {128, 188, 0, 12, 1}, + {130, 188, 4, 12, 1}, + {132, 188, 8, 12, 1}, + {134, 189, 0, 12, 1}, + {136, 189, 4, 12, 1}, + {138, 189, 8, 12, 1}, + {140, 190, 0, 12, 1}, + {149, 191, 6, 12, 1}, + {151, 191, 10, 12, 1}, + {153, 192, 2, 12, 1}, + {155, 192, 6, 12, 1}, + {157, 192, 10, 12, 1}, + {159, 193, 2, 12, 1}, + {161, 193, 6, 12, 1}, + {165, 194, 2, 12, 1}, + {184, 164, 0, 12, 1}, + {188, 164, 4, 12, 1}, + {192, 165, 8, 12, 1}, + {196, 166, 0, 12, 1}, +}; + +static const struct rf_channel rf_vals_5592_xtal40[] = { + /* Channel, N, K, mod, R */ + {1, 241, 2, 10, 3}, + {2, 241, 7, 10, 3}, + {3, 242, 2, 10, 3}, + {4, 242, 7, 10, 3}, + {5, 243, 2, 10, 3}, + {6, 243, 7, 10, 3}, + {7, 244, 2, 10, 3}, + {8, 244, 7, 10, 3}, + {9, 245, 2, 10, 3}, + {10, 245, 7, 10, 3}, + {11, 246, 2, 10, 3}, + {12, 246, 7, 10, 3}, + {13, 247, 2, 10, 3}, + {14, 248, 4, 10, 3}, + {36, 86, 4, 12, 1}, + {38, 86, 6, 12, 1}, + {40, 86, 8, 12, 1}, + {42, 86, 10, 12, 1}, + {44, 87, 0, 12, 1}, + {46, 87, 2, 12, 1}, + {48, 87, 4, 12, 1}, + {50, 87, 6, 12, 1}, + {52, 87, 8, 12, 1}, + {54, 87, 10, 12, 1}, + {56, 88, 0, 12, 1}, + {58, 88, 2, 12, 1}, + {60, 88, 4, 12, 1}, + {62, 88, 6, 12, 1}, + {64, 88, 8, 12, 1}, + {100, 91, 8, 12, 1}, + {102, 91, 10, 12, 1}, + {104, 92, 0, 12, 1}, + {106, 92, 2, 12, 1}, + {108, 92, 4, 12, 1}, + {110, 92, 6, 12, 1}, + {112, 92, 8, 12, 1}, + {114, 92, 10, 12, 1}, + {116, 93, 0, 12, 1}, + {118, 93, 2, 12, 1}, + {120, 93, 4, 12, 1}, + {122, 93, 6, 12, 1}, + {124, 93, 8, 12, 1}, + {126, 93, 10, 12, 1}, + {128, 94, 0, 12, 1}, + {130, 94, 2, 12, 1}, + {132, 94, 4, 12, 1}, + {134, 94, 6, 12, 1}, + {136, 94, 8, 12, 1}, + {138, 94, 10, 12, 1}, + {140, 95, 0, 12, 1}, + {149, 95, 9, 12, 1}, + {151, 95, 11, 12, 1}, + {153, 96, 1, 12, 1}, + {155, 96, 3, 12, 1}, + {157, 96, 5, 12, 1}, + {159, 96, 7, 12, 1}, + {161, 96, 9, 12, 1}, + {165, 97, 1, 12, 1}, + {184, 82, 0, 12, 1}, + {188, 82, 4, 12, 1}, + {192, 82, 8, 12, 1}, + {196, 83, 0, 12, 1}, +}; + +static const struct rf_channel rf_vals_7620[] = { + {1, 0x50, 0x99, 0x99, 1}, + {2, 0x50, 0x44, 0x44, 2}, + {3, 0x50, 0xEE, 0xEE, 2}, + {4, 0x50, 0x99, 0x99, 3}, + {5, 0x51, 0x44, 0x44, 0}, + {6, 0x51, 0xEE, 0xEE, 0}, + {7, 0x51, 0x99, 0x99, 1}, + {8, 0x51, 0x44, 0x44, 2}, + {9, 0x51, 0xEE, 0xEE, 2}, + {10, 0x51, 0x99, 0x99, 3}, + {11, 0x52, 0x44, 0x44, 0}, + {12, 0x52, 0xEE, 0xEE, 0}, + {13, 0x52, 0x99, 0x99, 1}, + {14, 0x52, 0x33, 0x33, 3}, +}; + +static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + struct channel_info *info; + s8 *default_power1; + s8 *default_power2; + s8 *default_power3; + unsigned int i, tx_chains, rx_chains; + u32 reg; + + /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* + * Change default retry settings to values corresponding more closely + * to rate[0].count setting of minstrel rate control algorithm. + */ + rt2x00dev->hw->wiphy->retry_short = 2; + rt2x00dev->hw->wiphy->retry_long = 2; + + /* + * Initialize all hw fields. + */ + ieee80211_hw_set(rt2x00dev->hw, REPORTS_TX_ACK_STATUS); + ieee80211_hw_set(rt2x00dev->hw, AMPDU_AGGREGATION); + ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); + ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); + ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); + + /* + * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices + * unless we are capable of sending the buffered frames out after the + * DTIM transmission using rt2x00lib_beacondone. This will send out + * multicast and broadcast traffic immediately instead of buffering it + * infinitly and thus dropping it after some time. + */ + if (!rt2x00_is_usb(rt2x00dev)) + ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING); + + ieee80211_hw_set(rt2x00dev->hw, MFP_CAPABLE); + + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2800_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + /* + * As rt2800 has a global fallback table we cannot specify + * more then one tx rate per frame but since the hw will + * try several rates (based on the fallback table) we should + * initialize max_report_rates to the maximum number of rates + * we are going to try. Otherwise mac80211 will truncate our + * reported tx rates and the rc algortihm will end up with + * incorrect data. + */ + rt2x00dev->hw->max_rates = 1; + rt2x00dev->hw->max_report_rates = 7; + rt2x00dev->hw->max_rate_tries = 1; + + /* + * Initialize hw_mode information. + */ + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; + + switch (rt2x00dev->chip.rf) { + case RF2720: + case RF2820: + spec->num_channels = 14; + spec->channels = rf_vals; + break; + + case RF2750: + case RF2850: + spec->num_channels = ARRAY_SIZE(rf_vals); + spec->channels = rf_vals; + break; + + case RF2020: + case RF3020: + case RF3021: + case RF3022: + case RF3070: + case RF3290: + case RF3320: + case RF3322: + case RF5350: + case RF5360: + case RF5362: + case RF5370: + case RF5372: + case RF5390: + case RF5392: + spec->num_channels = 14; + if (rt2800_clk_is_20mhz(rt2x00dev)) + spec->channels = rf_vals_3x_xtal20; + else + spec->channels = rf_vals_3x; + break; + + case RF7620: + spec->num_channels = ARRAY_SIZE(rf_vals_7620); + spec->channels = rf_vals_7620; + break; + + case RF3052: + case RF3053: + spec->num_channels = ARRAY_SIZE(rf_vals_3x); + spec->channels = rf_vals_3x; + break; + + case RF3853: + spec->num_channels = ARRAY_SIZE(rf_vals_3853); + spec->channels = rf_vals_3853; + break; + + case RF5592: + reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX); + if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) { + spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal40); + spec->channels = rf_vals_5592_xtal40; + } else { + spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal20); + spec->channels = rf_vals_5592_xtal20; + } + break; + } + + if (WARN_ON_ONCE(!spec->channels)) + return -ENODEV; + + spec->supported_bands = SUPPORT_BAND_2GHZ; + if (spec->num_channels > 14) + spec->supported_bands |= SUPPORT_BAND_5GHZ; + + /* + * Initialize HT information. + */ + if (!rt2x00_rf(rt2x00dev, RF2020)) + spec->ht.ht_supported = true; + else + spec->ht.ht_supported = false; + + spec->ht.cap = + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40; + + tx_chains = rt2x00dev->default_ant.tx_chain_num; + rx_chains = rt2x00dev->default_ant.rx_chain_num; + + if (tx_chains >= 2) + spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC; + + spec->ht.cap |= rx_chains << IEEE80211_HT_CAP_RX_STBC_SHIFT; + + spec->ht.ampdu_factor = (rx_chains > 1) ? 3 : 2; + spec->ht.ampdu_density = 4; + spec->ht.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + if (tx_chains != rx_chains) { + spec->ht.mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; + spec->ht.mcs.tx_params |= + (tx_chains - 1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; + } + + switch (rx_chains) { + case 3: + spec->ht.mcs.rx_mask[2] = 0xff; + fallthrough; + case 2: + spec->ht.mcs.rx_mask[1] = 0xff; + fallthrough; + case 1: + spec->ht.mcs.rx_mask[0] = 0xff; + spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ + break; + } + + /* + * Create channel information and survey arrays + */ + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + rt2x00dev->chan_survey = + kcalloc(spec->num_channels, sizeof(struct rt2x00_chan_survey), + GFP_KERNEL); + if (!rt2x00dev->chan_survey) { + kfree(info); + return -ENOMEM; + } + + spec->channels_info = info; + + default_power1 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); + default_power2 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); + + if (rt2x00dev->default_ant.tx_chain_num > 2) + default_power3 = rt2800_eeprom_addr(rt2x00dev, + EEPROM_EXT_TXPOWER_BG3); + else + default_power3 = NULL; + + for (i = 0; i < 14; i++) { + info[i].default_power1 = default_power1[i]; + info[i].default_power2 = default_power2[i]; + if (default_power3) + info[i].default_power3 = default_power3[i]; + } + + if (spec->num_channels > 14) { + default_power1 = rt2800_eeprom_addr(rt2x00dev, + EEPROM_TXPOWER_A1); + default_power2 = rt2800_eeprom_addr(rt2x00dev, + EEPROM_TXPOWER_A2); + + if (rt2x00dev->default_ant.tx_chain_num > 2) + default_power3 = + rt2800_eeprom_addr(rt2x00dev, + EEPROM_EXT_TXPOWER_A3); + else + default_power3 = NULL; + + for (i = 14; i < spec->num_channels; i++) { + info[i].default_power1 = default_power1[i - 14]; + info[i].default_power2 = default_power2[i - 14]; + if (default_power3) + info[i].default_power3 = default_power3[i - 14]; + } + } + + switch (rt2x00dev->chip.rf) { + case RF2020: + case RF3020: + case RF3021: + case RF3022: + case RF3320: + case RF3052: + case RF3053: + case RF3070: + case RF3290: + case RF3853: + case RF5350: + case RF5360: + case RF5362: + case RF5370: + case RF5372: + case RF5390: + case RF5392: + case RF5592: + case RF7620: + __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags); + break; + } + + return 0; +} + +static int rt2800_probe_rt(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u32 rt; + u32 rev; + + if (rt2x00_rt(rt2x00dev, RT3290)) + reg = rt2800_register_read(rt2x00dev, MAC_CSR0_3290); + else + reg = rt2800_register_read(rt2x00dev, MAC_CSR0); + + rt = rt2x00_get_field32(reg, MAC_CSR0_CHIPSET); + rev = rt2x00_get_field32(reg, MAC_CSR0_REVISION); + + switch (rt) { + case RT2860: + case RT2872: + case RT2883: + case RT3070: + case RT3071: + case RT3090: + case RT3290: + case RT3352: + case RT3390: + case RT3572: + case RT3593: + case RT3883: + case RT5350: + case RT5390: + case RT5392: + case RT5592: + break; + default: + rt2x00_err(rt2x00dev, "Invalid RT chipset 0x%04x, rev %04x detected\n", + rt, rev); + return -ENODEV; + } + + if (rt == RT5390 && rt2x00_is_soc(rt2x00dev)) + rt = RT6352; + + rt2x00_set_rt(rt2x00dev, rt, rev); + + return 0; +} + +int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + u32 reg; + + retval = rt2800_probe_rt(rt2x00dev); + if (retval) + return retval; + + /* + * Allocate eeprom data. + */ + retval = rt2800_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2800_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + reg = rt2800_register_read(rt2x00dev, GPIO_CTRL); + rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1); + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + + /* + * Initialize hw specifications. + */ + retval = rt2800_probe_hw_mode(rt2x00dev); + if (retval) + return retval; + + /* + * Set device capabilities. + */ + __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); + __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags); + if (!rt2x00_is_usb(rt2x00dev)) + __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags); + + /* + * Set device requirements. + */ + if (!rt2x00_is_soc(rt2x00dev)) + __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags); + if (!rt2800_hwcrypt_disabled(rt2x00dev)) + __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); + __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags); + if (rt2x00_is_usb(rt2x00dev)) + __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags); + else { + __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags); + } + + if (modparam_watchdog) { + __set_bit(CAPABILITY_RESTART_HW, &rt2x00dev->cap_flags); + rt2x00dev->link.watchdog_interval = msecs_to_jiffies(100); + } else { + rt2x00dev->link.watchdog_disabled = true; + } + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_probe_hw); + +/* + * IEEE80211 stack callback functions. + */ +void rt2800_get_key_seq(struct ieee80211_hw *hw, + struct ieee80211_key_conf *key, + struct ieee80211_key_seq *seq) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + + if (key->cipher != WLAN_CIPHER_SUITE_TKIP) + return; + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); + rt2800_register_multiread(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2); + memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4); +} +EXPORT_SYMBOL_GPL(rt2800_get_key_seq); + +int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); + + reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); + rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, CCK_PROT_CFG); + rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG); + rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG); + rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG); + rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG); + rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG); + rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold); + +int rt2800_conf_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + unsigned int link_id, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + u32 offset; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, vif, link_id, queue_idx, params); + if (retval) + return retval; + + /* + * We only need to perform additional register initialization + * for WMM queues/ + */ + if (queue_idx >= 4) + return 0; + + queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); + field.bit_offset = (queue_idx & 1) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + reg = rt2800_register_read(rt2x00dev, offset); + rt2x00_set_field32(®, field, queue->txop); + rt2800_register_write(rt2x00dev, offset, reg); + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + reg = rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG); + rt2x00_set_field32(®, field, queue->aifs); + rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG); + rt2x00_set_field32(®, field, queue->cw_min); + rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); + + reg = rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG); + rt2x00_set_field32(®, field, queue->cw_max); + rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); + + /* Update EDCA registers */ + offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); + + reg = rt2800_register_read(rt2x00dev, offset); + rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); + rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); + rt2800_register_write(rt2x00dev, offset, reg); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_conf_tx); + +u64 rt2800_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + reg = rt2800_register_read(rt2x00dev, TSF_TIMER_DW1); + tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; + reg = rt2800_register_read(rt2x00dev, TSF_TIMER_DW0); + tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); + + return tsf; +} +EXPORT_SYMBOL_GPL(rt2800_get_tsf); + +int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_ampdu_params *params) +{ + struct ieee80211_sta *sta = params->sta; + enum ieee80211_ampdu_mlme_action action = params->action; + u16 tid = params->tid; + struct rt2x00_sta *sta_priv = (struct rt2x00_sta *)sta->drv_priv; + int ret = 0; + + /* + * Don't allow aggregation for stations the hardware isn't aware + * of because tx status reports for frames to an unknown station + * always contain wcid=WCID_END+1 and thus we can't distinguish + * between multiple stations which leads to unwanted situations + * when the hw reorders frames due to aggregation. + */ + if (sta_priv->wcid > WCID_END) + return -ENOSPC; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + case IEEE80211_AMPDU_RX_STOP: + /* + * The hw itself takes care of setting up BlockAck mechanisms. + * So, we only have to allow mac80211 to nagotiate a BlockAck + * agreement. Once that is done, the hw will BlockAck incoming + * AMPDUs without further setup. + */ + break; + case IEEE80211_AMPDU_TX_START: + ret = IEEE80211_AMPDU_TX_START_IMMEDIATE; + break; + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + break; + default: + rt2x00_warn((struct rt2x00_dev *)hw->priv, + "Unknown AMPDU action\n"); + } + + return ret; +} +EXPORT_SYMBOL_GPL(rt2800_ampdu_action); + +int rt2800_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct rt2x00_chan_survey *chan_survey = + &rt2x00dev->chan_survey[idx]; + enum nl80211_band band = NL80211_BAND_2GHZ; + + if (idx >= rt2x00dev->bands[band].n_channels) { + idx -= rt2x00dev->bands[band].n_channels; + band = NL80211_BAND_5GHZ; + } + + if (idx >= rt2x00dev->bands[band].n_channels) + return -ENOENT; + + if (idx == 0) + rt2800_update_survey(rt2x00dev); + + survey->channel = &rt2x00dev->bands[band].channels[idx]; + + survey->filled = SURVEY_INFO_TIME | + SURVEY_INFO_TIME_BUSY | + SURVEY_INFO_TIME_EXT_BUSY; + + survey->time = div_u64(chan_survey->time_idle + chan_survey->time_busy, 1000); + survey->time_busy = div_u64(chan_survey->time_busy, 1000); + survey->time_ext_busy = div_u64(chan_survey->time_ext_busy, 1000); + + if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) + survey->filled |= SURVEY_INFO_IN_USE; + + return 0; + +} +EXPORT_SYMBOL_GPL(rt2800_get_survey); + +MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz"); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2800 library"); +MODULE_LICENSE("GPL"); |