diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c')
-rw-r--r-- | drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1759 |
1 files changed, 1759 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c new file mode 100644 index 0000000000..954369ed62 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -0,0 +1,1759 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * RTL8XXXU mac80211 USB driver - 8723b specific subdriver + * + * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com> + * + * Portions, notably calibration code: + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This driver was written as a replacement for the vendor provided + * rtl8723au driver. As the Realtek 8xxx chips are very similar in + * their programming interface, I have started adding support for + * additional 8xxx chips like the 8192cu, 8188cus, etc. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/wireless.h> +#include <linux/firmware.h> +#include <linux/moduleparam.h> +#include <net/mac80211.h> +#include "rtl8xxxu.h" +#include "rtl8xxxu_regs.h" + +static const struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { + {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, + {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, + {0x430, 0x00}, {0x431, 0x00}, + {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, + {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, + {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, + {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, + {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, + {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, + {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, + {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, + {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, + {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, + {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, + {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, + {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, + {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, + {0x516, 0x0a}, {0x525, 0x4f}, + {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, + {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, + {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, + {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, + {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, + {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, + {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, + {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, + {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04}, + {0xffff, 0xff}, +}; + +static const struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = { + {0x800, 0x80040000}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10001331}, {0x814, 0x020c3d10}, + {0x818, 0x02200385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00190204}, + {0x828, 0x00000000}, {0x82c, 0x00000000}, + {0x830, 0x00000000}, {0x834, 0x00000000}, + {0x838, 0x00000000}, {0x83c, 0x00000000}, + {0x840, 0x00010000}, {0x844, 0x00000000}, + {0x848, 0x00000000}, {0x84c, 0x00000000}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x569a11a9}, {0x85c, 0x01000014}, + {0x860, 0x66f60110}, {0x864, 0x061f0649}, + {0x868, 0x00000000}, {0x86c, 0x27272700}, + {0x870, 0x07000760}, {0x874, 0x25004000}, + {0x878, 0x00000808}, {0x87c, 0x00000000}, + {0x880, 0xb0000c1c}, {0x884, 0x00000001}, + {0x888, 0x00000000}, {0x88c, 0xccc000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x89c, 0x00706050}, + {0x900, 0x00000000}, {0x904, 0x00000023}, + {0x908, 0x00000000}, {0x90c, 0x81121111}, + {0x910, 0x00000002}, {0x914, 0x00000201}, + {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c}, + {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f}, + {0xa10, 0x9500bb78}, {0xa14, 0x1114d028}, + {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, + {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, + {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, + {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, + {0xa78, 0x00000900}, {0xa7c, 0x225b0606}, + {0xa80, 0x21806490}, {0xb2c, 0x00000000}, + {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, + {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, + {0xc10, 0x08800000}, {0xc14, 0x40000100}, + {0xc18, 0x08800000}, {0xc1c, 0x40000100}, + {0xc20, 0x00000000}, {0xc24, 0x00000000}, + {0xc28, 0x00000000}, {0xc2c, 0x00000000}, + {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, + {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, + {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, + {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, + {0xc50, 0x69553420}, {0xc54, 0x43bc0094}, + {0xc58, 0x00013149}, {0xc5c, 0x00250492}, + {0xc60, 0x00000000}, {0xc64, 0x7112848b}, + {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, + {0xc70, 0x2c7f000d}, {0xc74, 0x020610db}, + {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, + {0xc80, 0x390000e4}, {0xc84, 0x20f60000}, + {0xc88, 0x40000100}, {0xc8c, 0x20200000}, + {0xc90, 0x00020e1a}, {0xc94, 0x00000000}, + {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f}, + {0xca0, 0x00000000}, {0xca4, 0x000300a0}, + {0xca8, 0x00000000}, {0xcac, 0x00000000}, + {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, + {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, + {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, + {0xcc8, 0x00000000}, {0xccc, 0x00000000}, + {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, + {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, + {0xce0, 0x00222222}, {0xce4, 0x00000000}, + {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, + {0xd00, 0x00000740}, {0xd04, 0x40020401}, + {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, + {0xd10, 0xa0633333}, {0xd14, 0x3333bc53}, + {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00127353}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000282}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d}, + {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d}, + {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d}, + {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d}, + {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, + {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, + {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, + {0xe44, 0x01004800}, {0xe48, 0xfb000000}, + {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, + {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, + {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, + {0xe68, 0x001b2556}, {0xe6c, 0x00c00096}, + {0xe70, 0x00c00096}, {0xe74, 0x01000056}, + {0xe78, 0x01000014}, {0xe7c, 0x01000056}, + {0xe80, 0x01000014}, {0xe84, 0x00c00096}, + {0xe88, 0x01000056}, {0xe8c, 0x00c00096}, + {0xed0, 0x00c00096}, {0xed4, 0x00c00096}, + {0xed8, 0x00c00096}, {0xedc, 0x000000d6}, + {0xee0, 0x000000d6}, {0xeec, 0x01c00016}, + {0xf14, 0x00000003}, {0xf4c, 0x00000000}, + {0xf00, 0x00000300}, + {0x820, 0x01000100}, {0x800, 0x83040000}, + {0xffff, 0xffffffff}, +}; + +static const struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { + {0xc78, 0xfd000001}, {0xc78, 0xfc010001}, + {0xc78, 0xfb020001}, {0xc78, 0xfa030001}, + {0xc78, 0xf9040001}, {0xc78, 0xf8050001}, + {0xc78, 0xf7060001}, {0xc78, 0xf6070001}, + {0xc78, 0xf5080001}, {0xc78, 0xf4090001}, + {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001}, + {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001}, + {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001}, + {0xc78, 0xed100001}, {0xc78, 0xec110001}, + {0xc78, 0xeb120001}, {0xc78, 0xea130001}, + {0xc78, 0xe9140001}, {0xc78, 0xe8150001}, + {0xc78, 0xe7160001}, {0xc78, 0xe6170001}, + {0xc78, 0xe5180001}, {0xc78, 0xe4190001}, + {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001}, + {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001}, + {0xc78, 0x671e0001}, {0xc78, 0x661f0001}, + {0xc78, 0x65200001}, {0xc78, 0x64210001}, + {0xc78, 0x63220001}, {0xc78, 0x4a230001}, + {0xc78, 0x49240001}, {0xc78, 0x48250001}, + {0xc78, 0x47260001}, {0xc78, 0x46270001}, + {0xc78, 0x45280001}, {0xc78, 0x44290001}, + {0xc78, 0x432a0001}, {0xc78, 0x422b0001}, + {0xc78, 0x292c0001}, {0xc78, 0x282d0001}, + {0xc78, 0x272e0001}, {0xc78, 0x262f0001}, + {0xc78, 0x0a300001}, {0xc78, 0x09310001}, + {0xc78, 0x08320001}, {0xc78, 0x07330001}, + {0xc78, 0x06340001}, {0xc78, 0x05350001}, + {0xc78, 0x04360001}, {0xc78, 0x03370001}, + {0xc78, 0x02380001}, {0xc78, 0x01390001}, + {0xc78, 0x013a0001}, {0xc78, 0x013b0001}, + {0xc78, 0x013c0001}, {0xc78, 0x013d0001}, + {0xc78, 0x013e0001}, {0xc78, 0x013f0001}, + {0xc78, 0xfc400001}, {0xc78, 0xfb410001}, + {0xc78, 0xfa420001}, {0xc78, 0xf9430001}, + {0xc78, 0xf8440001}, {0xc78, 0xf7450001}, + {0xc78, 0xf6460001}, {0xc78, 0xf5470001}, + {0xc78, 0xf4480001}, {0xc78, 0xf3490001}, + {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001}, + {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001}, + {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001}, + {0xc78, 0xec500001}, {0xc78, 0xeb510001}, + {0xc78, 0xea520001}, {0xc78, 0xe9530001}, + {0xc78, 0xe8540001}, {0xc78, 0xe7550001}, + {0xc78, 0xe6560001}, {0xc78, 0xe5570001}, + {0xc78, 0xe4580001}, {0xc78, 0xe3590001}, + {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001}, + {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001}, + {0xc78, 0x675e0001}, {0xc78, 0x665f0001}, + {0xc78, 0x65600001}, {0xc78, 0x64610001}, + {0xc78, 0x63620001}, {0xc78, 0x62630001}, + {0xc78, 0x61640001}, {0xc78, 0x48650001}, + {0xc78, 0x47660001}, {0xc78, 0x46670001}, + {0xc78, 0x45680001}, {0xc78, 0x44690001}, + {0xc78, 0x436a0001}, {0xc78, 0x426b0001}, + {0xc78, 0x286c0001}, {0xc78, 0x276d0001}, + {0xc78, 0x266e0001}, {0xc78, 0x256f0001}, + {0xc78, 0x24700001}, {0xc78, 0x09710001}, + {0xc78, 0x08720001}, {0xc78, 0x07730001}, + {0xc78, 0x06740001}, {0xc78, 0x05750001}, + {0xc78, 0x04760001}, {0xc78, 0x03770001}, + {0xc78, 0x02780001}, {0xc78, 0x01790001}, + {0xc78, 0x017a0001}, {0xc78, 0x017b0001}, + {0xc78, 0x017c0001}, {0xc78, 0x017d0001}, + {0xc78, 0x017e0001}, {0xc78, 0x017f0001}, + {0xc50, 0x69553422}, + {0xc50, 0x69553420}, + {0x824, 0x00390204}, + {0xffff, 0xffffffff} +}; + +static const struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { + {0x00, 0x00010000}, {0xb0, 0x000dffe0}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb1, 0x00000018}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb2, 0x00084c00}, + {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa}, + {0xb7, 0x00000010}, {0xb8, 0x0000907f}, + {0x5c, 0x00000002}, {0x7c, 0x00000002}, + {0x7e, 0x00000005}, {0x8b, 0x0006fc00}, + {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2}, + {0x1e, 0x00000000}, {0xdf, 0x00000780}, + {0x50, 0x00067435}, + /* + * The 8723bu vendor driver indicates that bit 8 should be set in + * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However + * they never actually check the package type - and just default + * to not setting it. + */ + {0x51, 0x0006b04e}, + {0x52, 0x000007d2}, {0x53, 0x00000000}, + {0x54, 0x00050400}, {0x55, 0x0004026e}, + {0xdd, 0x0000004c}, {0x70, 0x00067435}, + /* + * 0x71 has same package type condition as for register 0x51 + */ + {0x71, 0x0006b04e}, + {0x72, 0x000007d2}, {0x73, 0x00000000}, + {0x74, 0x00050400}, {0x75, 0x0004026e}, + {0xef, 0x00000100}, {0x34, 0x0000add7}, + {0x35, 0x00005c00}, {0x34, 0x00009dd4}, + {0x35, 0x00005000}, {0x34, 0x00008dd1}, + {0x35, 0x00004400}, {0x34, 0x00007dce}, + {0x35, 0x00003800}, {0x34, 0x00006cd1}, + {0x35, 0x00004400}, {0x34, 0x00005cce}, + {0x35, 0x00003800}, {0x34, 0x000048ce}, + {0x35, 0x00004400}, {0x34, 0x000034ce}, + {0x35, 0x00003800}, {0x34, 0x00002451}, + {0x35, 0x00004400}, {0x34, 0x0000144e}, + {0x35, 0x00003800}, {0x34, 0x00000051}, + {0x35, 0x00004400}, {0xef, 0x00000000}, + {0xef, 0x00000100}, {0xed, 0x00000010}, + {0x44, 0x0000add7}, {0x44, 0x00009dd4}, + {0x44, 0x00008dd1}, {0x44, 0x00007dce}, + {0x44, 0x00006cc1}, {0x44, 0x00005cce}, + {0x44, 0x000044d1}, {0x44, 0x000034ce}, + {0x44, 0x00002451}, {0x44, 0x0000144e}, + {0x44, 0x00000051}, {0xef, 0x00000000}, + {0xed, 0x00000000}, {0x7f, 0x00020080}, + {0xef, 0x00002000}, {0x3b, 0x000380ef}, + {0x3b, 0x000302fe}, {0x3b, 0x00028ce6}, + {0x3b, 0x000200bc}, {0x3b, 0x000188a5}, + {0x3b, 0x00010fbc}, {0x3b, 0x00008f71}, + {0x3b, 0x00000900}, {0xef, 0x00000000}, + {0xed, 0x00000001}, {0x40, 0x000380ef}, + {0x40, 0x000302fe}, {0x40, 0x00028ce6}, + {0x40, 0x000200bc}, {0x40, 0x000188a5}, + {0x40, 0x00010fbc}, {0x40, 0x00008f71}, + {0x40, 0x00000900}, {0xed, 0x00000000}, + {0x82, 0x00080000}, {0x83, 0x00008000}, + {0x84, 0x00048d80}, {0x85, 0x00068000}, + {0xa2, 0x00080000}, {0xa3, 0x00008000}, + {0xa4, 0x00048d80}, {0xa5, 0x00068000}, + {0xed, 0x00000002}, {0xef, 0x00000002}, + {0x56, 0x00000032}, {0x76, 0x00000032}, + {0x01, 0x00000780}, + {0xff, 0xffffffff} +}; + +static int rtl8723bu_identify_chip(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + u32 val32, sys_cfg, vendor; + int ret = 0; + + sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG); + priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK); + if (sys_cfg & SYS_CFG_TRP_VAUX_EN) { + dev_info(dev, "Unsupported test chip\n"); + ret = -ENOTSUPP; + goto out; + } + + strscpy(priv->chip_name, "8723BU", sizeof(priv->chip_name)); + priv->rtl_chip = RTL8723B; + priv->rf_paths = 1; + priv->rx_paths = 1; + priv->tx_paths = 1; + + val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL); + if (val32 & MULTI_WIFI_FUNC_EN) + priv->has_wifi = 1; + if (val32 & MULTI_BT_FUNC_EN) + priv->has_bluetooth = 1; + if (val32 & MULTI_GPS_FUNC_EN) + priv->has_gps = 1; + priv->is_multi_func = 1; + + vendor = sys_cfg & SYS_CFG_VENDOR_EXT_MASK; + rtl8xxxu_identify_vendor_2bits(priv, vendor); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS); + priv->rom_rev = u32_get_bits(val32, GPIO_RF_RL_ID); + + rtl8xxxu_config_endpoints_sie(priv); + + /* + * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX + */ + if (!priv->ep_tx_count) + ret = rtl8xxxu_config_endpoints_no_sie(priv); + +out: + return ret; +} + +static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) +{ + struct h2c_cmd h2c; + int reqnum = 0; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.data = data; + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); + + reqnum++; + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.addr = reg; + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); +} + +static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 sys_func; + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); + sys_func &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); +} + +static void +rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + u32 val32, ofdm, mcs; + u8 cck, ofdmbase, mcsbase; + int group, tx_idx; + + tx_idx = 0; + group = rtl8xxxu_gen2_channel_to_group(channel); + + cck = priv->cck_tx_power_index_B[group]; + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_B[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; + ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_B[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); +} + +static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, + sizeof(efuse->tx_power_index_B.cck_base)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->tx_power_index_B.ht40_base, + sizeof(efuse->tx_power_index_B.ht40_base)); + + priv->ofdm_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; + priv->ofdm_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.a; + + priv->ht20_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; + priv->ht20_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; + + priv->ht40_tx_power_diff[0].a = 0; + priv->ht40_tx_power_diff[0].b = 0; + + for (i = 1; i < RTL8723B_TX_COUNT; i++) { + priv->ofdm_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; + priv->ofdm_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; + + priv->ht20_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht20; + priv->ht20_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht20; + + priv->ht40_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht40; + priv->ht40_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht40; + } + + priv->default_crystal_cap = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f; + + return 0; +} + +static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv) +{ + const char *fw_name; + int ret; + + if (priv->enable_bluetooth) + fw_name = "rtlwifi/rtl8723bu_bt.bin"; + else + fw_name = "rtlwifi/rtl8723bu_nic.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + return ret; +} + +static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + + /* 6. 0x1f[7:0] = 0x07 */ + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + + /* Why? */ + rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); + rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); + rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); + + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); +} + +static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A); + /* + * PHY LCK + */ + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01); + msleep(200); + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0); + + return ret; +} + +void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1); + val32 &= ~(BIT(20) | BIT(24)); + rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 &= ~BIT(4); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 |= BIT(3); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= BIT(24); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); + val32 &= 0xffffff00; + val32 |= 0x77; + rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); +} + +static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + +out: + return result; +} + +static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + + val32 = 0x80007c00 | (reg_e94 &0x3ff0000) | + ((reg_e9c & 0x3ff0000) >> 16); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* + * Modify RX IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77); + + /* + * PA, PAD setting + */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0xf80); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f); + + /* + * RX IQK setting + */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Disable BT + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x780); + + val32 = (reg_eac >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000) && + ((reg_ea4 & 0x03ff0000) < 0x01100000) && + ((reg_ea4 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x02; + else /* If TX not OK, ignore RX */ + goto out; +out: + return result; +} + +static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok /*, path_b_ok */; + int retry = 2; + static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE + }; + u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; + u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 |= 0x0f000000; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); + + /* + * RX IQ calibration setting for 8723B D cut large current issue + * when leaving IPS + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_iqk_path_a(priv); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_rx_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); + + if (priv->tx_paths > 1) { +#if 1 + dev_warn(dev, "%s: Path B not supported\n", __func__); +#else + + /* + * Path A into standby + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8xxxu_iqk_path_b(priv); + if (path_b_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8723bu_rx_iqk_path_b(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); +#endif + } + + /* Back to BB mode, load original value */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (t) { + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); + + if (priv->tx_paths > 1) { + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | xb_agc); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + u32 val32, bt_control; + s32 reg_tmp = 0; + bool simu; + + rtl8xxxu_gen2_prepare_calibrate(priv, 1); + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); + + for (i = 0; i < 3; i++) { + rtl8723bu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 1, 2); + if (simu) { + candidate = 1; + } else { + for (i = 0; i < 8; i++) + reg_tmp += result[3][i]; + + if (reg_tmp) + candidate = 3; + else + candidate = -1; + } + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n", + __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->tx_paths > 1 && reg_eb4) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); + + if (priv->rf_paths > 1) + dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); + + rtl8xxxu_gen2_prepare_calibrate(priv, 0); +} + +static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int count, ret = 0; + + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0); + + /* Enable rising edge triggering interrupt */ + val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM); + val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ; + rtl8xxxu_write16(priv, REG_GPIO_INTM, val16); + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* 0x0005[1] = 1 turn off MAC by HW state machine*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + if ((val8 & BIT(1)) == 0) + break; + udelay(10); + } + + if (!count) { + dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", + __func__); + ret = -EBUSY; + goto exit; + } + + /* Enable BT control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 &= ~AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 |= SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 &= ~LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + +exit: + return ret; +} + +static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 |= LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + + /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 &= ~BIT(4); + rtl8xxxu_write8(priv, 0x0067, val8); + + mdelay(1); + + /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* Disable SW LPS 0x04[10]= 0 */ + val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_SW_LPS; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Wait until 0x04[17] = 1 power ready */ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable HWPDN 0x04[15]= 0*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_HW_POWERDOWN; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable WL suspend*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE); + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* Enable WL control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 |= AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* Enable falling edge triggering interrupt */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8); + + /* Enable GPIO9 interrupt mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8); + + /* Enable GPIO9 input mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8); + + /* Enable HSISR GPIO[C:0] interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_HSIMR, val8); + + /* Enable HSISR GPIO9 interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_HSIMR + 2, val8); + + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL); + val8 |= MULTI_WIFI_HW_ROF_EN; + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8); + + /* For GPIO9 internal pull high setting BIT(14) */ + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1); + val8 |= BIT(6); + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8); + +exit: + return ret; +} + +static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int ret; + + rtl8xxxu_disabled_to_emu(priv); + + ret = rtl8723b_emu_to_active(priv); + if (ret) + goto exit; + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + /* + * BT coexist power on settings. This is identical for 1 and 2 + * antenna parts. + */ + rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18); + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + /* Antenna inverse */ + rtl8xxxu_write8(priv, 0xfe08, 0x01); + + val16 = rtl8xxxu_read16(priv, REG_PWR_DATA); + val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write16(priv, REG_PWR_DATA, val16); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= LEDCFG0_DPDT_SELECT; + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA; + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); +exit: + return ret; +} + +static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + rtl8xxxu_flush_fifo(priv); + + /* + * Disable TX report timer + */ + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + + rtl8xxxu_write8(priv, REG_CR, 0x0000); + + rtl8xxxu_active_to_lps(priv); + + /* Reset Firmware if running in RAM */ + if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) + rtl8xxxu_firmware_self_reset(priv); + + /* Reset MCU */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* Reset MCU ready status */ + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + + rtl8723bu_active_to_emu(priv); + + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */ + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); +} + +static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) +{ + struct h2c_cmd h2c; + u32 val32; + u8 val8; + + val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA); + val32 |= (BIT(22) | BIT(23)); + rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32); + + /* + * No indication anywhere as to what 0x0790 does. The 2 antenna + * vendor code preserves bits 6-7 here. + */ + rtl8xxxu_write8(priv, 0x0790, 0x05); + /* + * 0x0778 seems to be related to enabling the number of antennas + * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it + * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01 + */ + rtl8xxxu_write8(priv, 0x0778, 0x01); + + val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); + val8 |= BIT(5); + rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); + + rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */ + + /* + * Set BT grant to low + */ + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; + h2c.bt_grant.data = 0; + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); + + /* + * WLAN action by PTA + */ + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x0c); + + /* + * BT select S0/S1 controlled by WiFi + */ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 |= BIT(5); + rtl8xxxu_write8(priv, 0x0067, val8); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); + + /* + * Bits 6/7 are marked in/out ... but for what? + */ + rtl8xxxu_write8(priv, 0x0974, 0xff); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(24); + val32 |= BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + /* + * Fix external switch Main->S1, Aux->S0 + */ + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; + h2c.ant_sel_rsv.ant_inverse = 1; + h2c.ant_sel_rsv.int_switch_type = 0; + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); + + /* + * Different settings per different antenna position. + * Antenna Position: | Normal Inverse + * -------------------------------------------------- + * Antenna switch to BT: | 0x280, 0x00 + * Antenna switch to WiFi: | 0x0, 0x280 + * Antenna switch to PTA: | 0x200, 0x80 + */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x80); + + /* + * Software control, antenna at WiFi side + */ + rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); + + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); + rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_info.cmd = H2C_8723B_BT_INFO; + h2c.bt_info.data = BIT(0); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; + h2c.ignore_wlan.data = 0; + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); +} + +static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) +{ + u32 agg_rx; + u8 agg_ctrl; + + /* + * For now simply disable RX aggregation + */ + agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); + agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; + + agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); + agg_rx &= ~RXDMA_USB_AGG_ENABLE; + agg_rx &= ~0xff0f; + + rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); + rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); +} + +static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + /* Time duration for NHM unit: 4us, 0x2710=40ms */ + rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710); + rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); + rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52); + rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); + /* TH8 */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 |= 0xff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + /* Enable CCK */ + val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); + val32 |= BIT(8) | BIT(9) | BIT(10); + rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); + /* Max power amongst all RX antennas */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); + val32 |= BIT(7); + rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); +} + +static s8 rtl8723b_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats) +{ + u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a; + s8 rx_pwr_all = 0x00; + u8 vga_idx, lna_idx; + + lna_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_LNA_IDX_MASK); + vga_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_VGA_IDX_MASK); + + switch (lna_idx) { + case 6: + rx_pwr_all = -34 - (2 * vga_idx); + break; + case 4: + rx_pwr_all = -14 - (2 * vga_idx); + break; + case 1: + rx_pwr_all = 6 - (2 * vga_idx); + break; + case 0: + rx_pwr_all = 16 - (2 * vga_idx); + break; + default: + break; + } + + return rx_pwr_all; +} + +struct rtl8xxxu_fileops rtl8723bu_fops = { + .identify_chip = rtl8723bu_identify_chip, + .parse_efuse = rtl8723bu_parse_efuse, + .load_firmware = rtl8723bu_load_firmware, + .power_on = rtl8723bu_power_on, + .power_off = rtl8723bu_power_off, + .read_efuse = rtl8xxxu_read_efuse, + .reset_8051 = rtl8723bu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .init_phy_bb = rtl8723bu_init_phy_bb, + .init_phy_rf = rtl8723bu_init_phy_rf, + .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, + .phy_lc_calibrate = rtl8723a_phy_lc_calibrate, + .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen2_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc24, + .parse_phystats = rtl8723au_rx_parse_phystats, + .init_aggregation = rtl8723bu_init_aggregation, + .init_statistics = rtl8723bu_init_statistics, + .init_burst = rtl8xxxu_init_burst, + .enable_rf = rtl8723b_enable_rf, + .disable_rf = rtl8xxxu_gen2_disable_rf, + .usb_quirks = rtl8xxxu_gen2_usb_quirks, + .set_tx_power = rtl8723b_set_tx_power, + .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, + .report_connect = rtl8xxxu_gen2_report_connect, + .report_rssi = rtl8xxxu_gen2_report_rssi, + .fill_txdesc = rtl8xxxu_fill_txdesc_v2, + .set_crystal_cap = rtl8723a_set_crystal_cap, + .cck_rssi = rtl8723b_cck_rssi, + .writeN_block_size = 1024, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), + .has_s0s1 = 1, + .has_tx_report = 1, + .gen2_thermal_meter = 1, + .needs_full_init = 1, + .init_reg_hmtfr = 1, + .ampdu_max_time = 0x5e, + .ustime_tsf_edca = 0x50, + .max_aggr_num = 0x0c14, + .supports_ap = 1, + .max_macid_num = 128, + .adda_1t_init = 0x01c00014, + .adda_1t_path_on = 0x01c00014, + .adda_2t_path_on_a = 0x01c00014, + .adda_2t_path_on_b = 0x01c00014, + .trxff_boundary = 0x3f7f, + .pbp_rx = PBP_PAGE_SIZE_256, + .pbp_tx = PBP_PAGE_SIZE_256, + .mactable = rtl8723b_mac_init_table, + .total_page_num = TX_TOTAL_PAGE_NUM_8723B, + .page_num_hi = TX_PAGE_NUM_HI_PQ_8723B, + .page_num_lo = TX_PAGE_NUM_LO_PQ_8723B, + .page_num_norm = TX_PAGE_NUM_NORM_PQ_8723B, +}; |