Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 71 insertions, 50 deletions

diff --git a/drivers/net/wireless/st/cw1200/cw1200_sdio.c b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
index 4c30b5772c..00c4731d8f 100644
--- a/drivers/net/wireless/st/cw1200/cw1200_sdio.c
+++ b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
@@ -8,7 +8,7 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
@@ -178,12 +178,15 @@ static int cw1200_sdio_irq_unsubscribe(struct hwbus_priv *self)
 	return ret;
 }
 
+/* Like the rest of the driver, this only supports one device per system */
+static struct gpio_desc *cw1200_reset;
+static struct gpio_desc *cw1200_powerup;
+
 static int cw1200_sdio_off(const struct cw1200_platform_data_sdio *pdata)
 {
-	if (pdata->reset) {
-		gpio_set_value(pdata->reset, 0);
+	if (cw1200_reset) {
+		gpiod_set_value(cw1200_reset, 0);
 		msleep(30); /* Min is 2 * CLK32K cycles */
-		gpio_free(pdata->reset);
 	}
 
 	if (pdata->power_ctrl)
@@ -196,16 +199,21 @@ static int cw1200_sdio_off(const struct cw1200_platform_data_sdio *pdata)
 
 static int cw1200_sdio_on(const struct cw1200_platform_data_sdio *pdata)
 {
-	/* Ensure I/Os are pulled low */
-	if (pdata->reset) {
-		gpio_request(pdata->reset, "cw1200_wlan_reset");
-		gpio_direction_output(pdata->reset, 0);
+	/* Ensure I/Os are pulled low (reset is active low) */
+	cw1200_reset = devm_gpiod_get_optional(NULL, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(cw1200_reset)) {
+		pr_err("could not get CW1200 SDIO reset GPIO\n");
+		return PTR_ERR(cw1200_reset);
 	}
-	if (pdata->powerup) {
-		gpio_request(pdata->powerup, "cw1200_wlan_powerup");
-		gpio_direction_output(pdata->powerup, 0);
+	gpiod_set_consumer_name(cw1200_reset, "cw1200_wlan_reset");
+	cw1200_powerup = devm_gpiod_get_optional(NULL, "powerup", GPIOD_OUT_LOW);
+	if (IS_ERR(cw1200_powerup)) {
+		pr_err("could not get CW1200 SDIO powerup GPIO\n");
+		return PTR_ERR(cw1200_powerup);
 	}
-	if (pdata->reset || pdata->powerup)
+	gpiod_set_consumer_name(cw1200_powerup, "cw1200_wlan_powerup");
+
+	if (cw1200_reset || cw1200_powerup)
 		msleep(10); /* Settle time? */
 
 	/* Enable 3v3 and 1v8 to hardware */
@@ -226,13 +234,13 @@ static int cw1200_sdio_on(const struct cw1200_platform_data_sdio *pdata)
 	}
 
 	/* Enable POWERUP signal */
-	if (pdata->powerup) {
-		gpio_set_value(pdata->powerup, 1);
+	if (cw1200_powerup) {
+		gpiod_set_value(cw1200_powerup, 1);
 		msleep(250); /* or more..? */
 	}
-	/* Enable RSTn signal */
-	if (pdata->reset) {
-		gpio_set_value(pdata->reset, 1);
+	/* Deassert RSTn signal, note active low */
+	if (cw1200_reset) {
+		gpiod_set_value(cw1200_reset, 0);
 		msleep(50); /* Or more..? */
 	}
 	return 0;
diff --git a/drivers/net/wireless/st/cw1200/cw1200_spi.c b/drivers/net/wireless/st/cw1200/cw1200_spi.c
index c82c0688b5..4f346fb977 100644
--- a/drivers/net/wireless/st/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/st/cw1200/cw1200_spi.c
@@ -11,7 +11,7 @@
  */
 
 #include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
@@ -38,6 +38,8 @@ struct hwbus_priv {
 	const struct cw1200_platform_data_spi *pdata;
 	spinlock_t		lock; /* Serialize all bus operations */
 	wait_queue_head_t       wq;
+	struct gpio_desc	*reset;
+	struct gpio_desc	*powerup;
 	int claimed;
 };
 
@@ -80,7 +82,7 @@ static int cw1200_spi_memcpy_fromio(struct hwbus_priv *self,
 #endif
 
 	/* Header is LE16 */
-	regaddr = cpu_to_le16(regaddr);
+	regaddr = (__force u16)cpu_to_le16(regaddr);
 
 	/* We have to byteswap if the SPI bus is limited to 8b operation
 	   or we are running on a Big Endian system
@@ -145,7 +147,7 @@ static int cw1200_spi_memcpy_toio(struct hwbus_priv *self,
 #endif
 
 	/* Header is LE16 */
-	regaddr = cpu_to_le16(regaddr);
+	regaddr = (__force u16)cpu_to_le16(regaddr);
 
 	/* We have to byteswap if the SPI bus is limited to 8b operation
 	   or we are running on a Big Endian system
@@ -275,12 +277,12 @@ static void cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
 	free_irq(self->func->irq, self);
 }
 
-static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
+static int cw1200_spi_off(struct hwbus_priv *self, const struct cw1200_platform_data_spi *pdata)
 {
-	if (pdata->reset) {
-		gpio_set_value(pdata->reset, 0);
+	if (self->reset) {
+		/* Assert RESET, note active low */
+		gpiod_set_value(self->reset, 1);
 		msleep(30); /* Min is 2 * CLK32K cycles */
-		gpio_free(pdata->reset);
 	}
 
 	if (pdata->power_ctrl)
@@ -291,18 +293,12 @@ static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
 	return 0;
 }
 
-static int cw1200_spi_on(const struct cw1200_platform_data_spi *pdata)
+static int cw1200_spi_on(struct hwbus_priv *self, const struct cw1200_platform_data_spi *pdata)
 {
 	/* Ensure I/Os are pulled low */
-	if (pdata->reset) {
-		gpio_request(pdata->reset, "cw1200_wlan_reset");
-		gpio_direction_output(pdata->reset, 0);
-	}
-	if (pdata->powerup) {
-		gpio_request(pdata->powerup, "cw1200_wlan_powerup");
-		gpio_direction_output(pdata->powerup, 0);
-	}
-	if (pdata->reset || pdata->powerup)
+	gpiod_direction_output(self->reset, 1); /* Active low */
+	gpiod_direction_output(self->powerup, 0);
+	if (self->reset || self->powerup)
 		msleep(10); /* Settle time? */
 
 	/* Enable 3v3 and 1v8 to hardware */
@@ -323,13 +319,13 @@ static int cw1200_spi_on(const struct cw1200_platform_data_spi *pdata)
 	}
 
 	/* Enable POWERUP signal */
-	if (pdata->powerup) {
-		gpio_set_value(pdata->powerup, 1);
+	if (self->powerup) {
+		gpiod_set_value(self->powerup, 1);
 		msleep(250); /* or more..? */
 	}
-	/* Enable RSTn signal */
-	if (pdata->reset) {
-		gpio_set_value(pdata->reset, 1);
+	/* Assert RSTn signal, note active low */
+	if (self->reset) {
+		gpiod_set_value(self->reset, 0);
 		msleep(50); /* Or more..? */
 	}
 	return 0;
@@ -381,20 +377,33 @@ static int cw1200_spi_probe(struct spi_device *func)
 		spi_get_chipselect(func, 0), func->mode, func->bits_per_word,
 		func->max_speed_hz);
 
-	if (cw1200_spi_on(plat_data)) {
+	self = devm_kzalloc(&func->dev, sizeof(*self), GFP_KERNEL);
+	if (!self) {
+		pr_err("Can't allocate SPI hwbus_priv.");
+		return -ENOMEM;
+	}
+
+	/* Request reset asserted */
+	self->reset = devm_gpiod_get_optional(&func->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(self->reset))
+		return dev_err_probe(&func->dev, PTR_ERR(self->reset),
+				     "could not get reset GPIO\n");
+	gpiod_set_consumer_name(self->reset, "cw1200_wlan_reset");
+
+	self->powerup = devm_gpiod_get_optional(&func->dev, "powerup", GPIOD_OUT_LOW);
+	if (IS_ERR(self->powerup))
+		return dev_err_probe(&func->dev, PTR_ERR(self->powerup),
+				     "could not get powerup GPIO\n");
+	gpiod_set_consumer_name(self->reset, "cw1200_wlan_powerup");
+
+	if (cw1200_spi_on(self, plat_data)) {
 		pr_err("spi_on() failed!\n");
-		return -1;
+		return -ENODEV;
 	}
 
 	if (spi_setup(func)) {
 		pr_err("spi_setup() failed!\n");
-		return -1;
-	}
-
-	self = devm_kzalloc(&func->dev, sizeof(*self), GFP_KERNEL);
-	if (!self) {
-		pr_err("Can't allocate SPI hwbus_priv.");
-		return -ENOMEM;
+		return -ENODEV;
 	}
 
 	self->pdata = plat_data;
@@ -416,7 +425,7 @@ static int cw1200_spi_probe(struct spi_device *func)
 
 	if (status) {
 		cw1200_spi_irq_unsubscribe(self);
-		cw1200_spi_off(plat_data);
+		cw1200_spi_off(self, plat_data);
 	}
 
 	return status;
@@ -434,7 +443,7 @@ static void cw1200_spi_disconnect(struct spi_device *func)
 			self->core = NULL;
 		}
 	}
-	cw1200_spi_off(dev_get_platdata(&func->dev));
+	cw1200_spi_off(self, dev_get_platdata(&func->dev));
 }
 
 static int __maybe_unused cw1200_spi_suspend(struct device *dev)
diff --git a/drivers/net/wireless/st/cw1200/main.c b/drivers/net/wireless/st/cw1200/main.c
index 381013e0db..a54a7b8686 100644
--- a/drivers/net/wireless/st/cw1200/main.c
+++ b/drivers/net/wireless/st/cw1200/main.c
@@ -203,6 +203,10 @@ static const unsigned long cw1200_ttl[] = {
 };
 
 static const struct ieee80211_ops cw1200_ops = {
+	.add_chanctx = ieee80211_emulate_add_chanctx,
+	.remove_chanctx = ieee80211_emulate_remove_chanctx,
+	.change_chanctx = ieee80211_emulate_change_chanctx,
+	.switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx,
 	.start			= cw1200_start,
 	.stop			= cw1200_stop,
 	.add_interface		= cw1200_add_interface,