Adding upstream version 6.9.2.upstream/6.9.2

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 12 insertions, 9 deletions

diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index cd9a41f59..0da2d29dd 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -1351,6 +1351,10 @@ static struct ieee80211_supported_band wl1251_band_2ghz = {
 };
 
 static const struct ieee80211_ops wl1251_ops = {
+	.add_chanctx = ieee80211_emulate_add_chanctx,
+	.remove_chanctx = ieee80211_emulate_remove_chanctx,
+	.change_chanctx = ieee80211_emulate_change_chanctx,
+	.switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx,
 	.start = wl1251_op_start,
 	.stop = wl1251_op_stop,
 	.add_interface = wl1251_op_add_interface,
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index 1e082d039..2499dc908 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -233,7 +233,7 @@ void wlcore_event_channel_switch(struct wl1271 *wl,
 			cancel_delayed_work(&wlvif->channel_switch_work);
 		} else {
 			set_bit(WLVIF_FLAG_BEACON_DISABLED, &wlvif->flags);
-			ieee80211_csa_finish(vif);
+			ieee80211_csa_finish(vif, 0);
 		}
 	}
 }
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 5736acb4d..ef12169f8 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2910,7 +2910,7 @@ static int wlcore_set_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	int ret;
 
 	wlvif->aid = vif->cfg.aid;
-	wlvif->channel_type = cfg80211_get_chandef_type(&bss_conf->chandef);
+	wlvif->channel_type = cfg80211_get_chandef_type(&bss_conf->chanreq.oper);
 	wlvif->beacon_int = bss_conf->beacon_int;
 	wlvif->wmm_enabled = bss_conf->qos;
 
@@ -4242,7 +4242,7 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 
 	/* Handle HT information change */
 	if ((changed & BSS_CHANGED_HT) &&
-	    (bss_conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT)) {
+	    (bss_conf->chanreq.oper.width != NL80211_CHAN_WIDTH_20_NOHT)) {
 		ret = wl1271_acx_set_ht_information(wl, wlvif,
 					bss_conf->ht_operation_mode);
 		if (ret < 0) {
@@ -4515,7 +4515,7 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 	/* Handle new association with HT. Do this after join. */
 	if (sta_exists) {
 		bool enabled =
-			bss_conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT;
+			bss_conf->chanreq.oper.width != NL80211_CHAN_WIDTH_20_NOHT;
 
 		ret = wlcore_hw_set_peer_cap(wl,
 					     &sta_ht_cap,
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index eb5482ed7..92fb5b8dc 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -16,7 +16,6 @@
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
-#include <linux/gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/printk.h>
 #include <linux/of.h>
@@ -75,8 +74,8 @@ static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr,
 
 	sdio_release_host(func);
 
-	if (WARN_ON(ret))
-		dev_err(child->parent, "sdio read failed (%d)\n", ret);
+	if (ret)
+		dev_err_ratelimited(child->parent, "sdio read failed (%d)\n", ret);
 
 	if (unlikely(dump)) {
 		printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr);
@@ -120,8 +119,8 @@ static int __must_check wl12xx_sdio_raw_write(struct device *child, int addr,
 
 	sdio_release_host(func);
 
-	if (WARN_ON(ret))
-		dev_err(child->parent, "sdio write failed (%d)\n", ret);
+	if (ret)
+		dev_err_ratelimited(child->parent, "sdio write failed (%d)\n", ret);
 
 	return ret;
 }