diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/wireless/virtual/mac80211_hwsim.h | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/wireless/virtual/mac80211_hwsim.h')
-rw-r--r-- | drivers/net/wireless/virtual/mac80211_hwsim.h | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/drivers/net/wireless/virtual/mac80211_hwsim.h b/drivers/net/wireless/virtual/mac80211_hwsim.h new file mode 100644 index 0000000000..92126f02c5 --- /dev/null +++ b/drivers/net/wireless/virtual/mac80211_hwsim.h @@ -0,0 +1,338 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211 + * Copyright (c) 2008, Jouni Malinen <j@w1.fi> + * Copyright (c) 2011, Javier Lopez <jlopex@gmail.com> + * Copyright (C) 2020, 2022 Intel Corporation + */ + +#ifndef __MAC80211_HWSIM_H +#define __MAC80211_HWSIM_H + +/** + * enum hwsim_tx_control_flags - flags to describe transmission info/status + * + * These flags are used to give the wmediumd extra information in order to + * modify its behavior for each frame + * + * @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame. + * @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack + * @HWSIM_TX_STAT_ACK: Frame was acknowledged + * + */ +enum hwsim_tx_control_flags { + HWSIM_TX_CTL_REQ_TX_STATUS = BIT(0), + HWSIM_TX_CTL_NO_ACK = BIT(1), + HWSIM_TX_STAT_ACK = BIT(2), +}; + +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * entities such as wmediumd to receive and process all broadcasted + * frames from a mac80211_hwsim radio device. + * + * This allow user space applications to decide if the frame should be + * dropped or not and implement a wireless medium simulator at user space. + * + * Registration is done by sending a register message to the driver and + * will be automatically unregistered if the user application doesn't + * responds to sent frames. + * Once registered the user application has to take responsibility of + * broadcasting the frames to all listening mac80211_hwsim radio + * interfaces. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + +/** + * enum hwsim_commands - supported hwsim commands + * + * @HWSIM_CMD_UNSPEC: unspecified command to catch errors + * + * @HWSIM_CMD_REGISTER: request to register and received all broadcasted + * frames by any mac80211_hwsim radio device. + * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user + * space, uses: + * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER, + * %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE, + * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE, %HWSIM_ATTR_FREQ (optional) + * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to + * kernel, uses: + * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS, + * %HWSIM_ATTR_TX_INFO, %WSIM_ATTR_TX_INFO_FLAGS, + * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE + * @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters, + * returns the radio ID (>= 0) or negative on errors, if successful + * then multicast the result, uses optional parameter: + * %HWSIM_ATTR_REG_STRICT_REG, %HWSIM_ATTR_SUPPORT_P2P_DEVICE, + * %HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, %HWSIM_ATTR_CHANNELS, + * %HWSIM_ATTR_NO_VIF, %HWSIM_ATTR_RADIO_NAME, %HWSIM_ATTR_USE_CHANCTX, + * %HWSIM_ATTR_REG_HINT_ALPHA2, %HWSIM_ATTR_REG_CUSTOM_REG, + * %HWSIM_ATTR_PERM_ADDR + * @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted + * @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses: + * %HWSIM_ATTR_RADIO_ID + * @HWSIM_CMD_ADD_MAC_ADDR: add a receive MAC address (given in the + * %HWSIM_ATTR_ADDR_RECEIVER attribute) to a device identified by + * %HWSIM_ATTR_ADDR_TRANSMITTER. This lets wmediumd forward frames + * to this receiver address for a given station. + * @HWSIM_CMD_DEL_MAC_ADDR: remove the MAC address again, the attributes + * are the same as to @HWSIM_CMD_ADD_MAC_ADDR. + * @HWSIM_CMD_START_PMSR: request to start peer measurement with the + * %HWSIM_ATTR_PMSR_REQUEST. Result will be sent back asynchronously + * with %HWSIM_CMD_REPORT_PMSR. + * @__HWSIM_CMD_MAX: enum limit + */ +enum { + HWSIM_CMD_UNSPEC, + HWSIM_CMD_REGISTER, + HWSIM_CMD_FRAME, + HWSIM_CMD_TX_INFO_FRAME, + HWSIM_CMD_NEW_RADIO, + HWSIM_CMD_DEL_RADIO, + HWSIM_CMD_GET_RADIO, + HWSIM_CMD_ADD_MAC_ADDR, + HWSIM_CMD_DEL_MAC_ADDR, + HWSIM_CMD_START_PMSR, + HWSIM_CMD_ABORT_PMSR, + HWSIM_CMD_REPORT_PMSR, + __HWSIM_CMD_MAX, +}; +#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1) + +#define HWSIM_CMD_CREATE_RADIO HWSIM_CMD_NEW_RADIO +#define HWSIM_CMD_DESTROY_RADIO HWSIM_CMD_DEL_RADIO + +/** + * enum hwsim_attrs - hwsim netlink attributes + * + * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that + * the frame is broadcasted to + * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that + * the frame was broadcasted from + * @HWSIM_ATTR_FRAME: Data array + * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process + properly the frame at user space + * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user + space + * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user + space + * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array + * @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame + * @HWSIM_ATTR_CHANNELS: u32 attribute used with the %HWSIM_CMD_CREATE_RADIO + * command giving the number of channels supported by the new radio + * @HWSIM_ATTR_RADIO_ID: u32 attribute used with %HWSIM_CMD_DESTROY_RADIO + * only to destroy a radio + * @HWSIM_ATTR_REG_HINT_ALPHA2: alpha2 for regulatoro driver hint + * (nla string, length 2) + * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute) + * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute) + * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag) + * @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO + * command to force use of channel contexts even when only a + * single channel is supported + * @HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE: used with the %HWSIM_CMD_CREATE_RADIO + * command to force radio removal when process that created the radio dies + * @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666 + * @HWSIM_ATTR_NO_VIF: Do not create vif (wlanX) when creating radio. + * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received. + * @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding + * rates of %HWSIM_ATTR_TX_INFO + * @HWSIM_ATTR_PERM_ADDR: permanent mac address of new radio + * @HWSIM_ATTR_IFTYPE_SUPPORT: u32 attribute of supported interface types bits + * @HWSIM_ATTR_CIPHER_SUPPORT: u32 array of supported cipher types + * @HWSIM_ATTR_MLO_SUPPORT: claim MLO support (exact parameters TBD) for + * the new radio + * @HWSIM_ATTR_PMSR_SUPPORT: nested attribute used with %HWSIM_CMD_CREATE_RADIO + * to provide peer measurement capabilities. (nl80211_peer_measurement_attrs) + * @HWSIM_ATTR_PMSR_REQUEST: nested attribute used with %HWSIM_CMD_START_PMSR + * to provide details about peer measurement request (nl80211_peer_measurement_attrs) + * @HWSIM_ATTR_PMSR_RESULT: nested attributed used with %HWSIM_CMD_REPORT_PMSR + * to provide peer measurement result (nl80211_peer_measurement_attrs) + * @__HWSIM_ATTR_MAX: enum limit + */ + + +enum { + HWSIM_ATTR_UNSPEC, + HWSIM_ATTR_ADDR_RECEIVER, + HWSIM_ATTR_ADDR_TRANSMITTER, + HWSIM_ATTR_FRAME, + HWSIM_ATTR_FLAGS, + HWSIM_ATTR_RX_RATE, + HWSIM_ATTR_SIGNAL, + HWSIM_ATTR_TX_INFO, + HWSIM_ATTR_COOKIE, + HWSIM_ATTR_CHANNELS, + HWSIM_ATTR_RADIO_ID, + HWSIM_ATTR_REG_HINT_ALPHA2, + HWSIM_ATTR_REG_CUSTOM_REG, + HWSIM_ATTR_REG_STRICT_REG, + HWSIM_ATTR_SUPPORT_P2P_DEVICE, + HWSIM_ATTR_USE_CHANCTX, + HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, + HWSIM_ATTR_RADIO_NAME, + HWSIM_ATTR_NO_VIF, + HWSIM_ATTR_FREQ, + HWSIM_ATTR_PAD, + HWSIM_ATTR_TX_INFO_FLAGS, + HWSIM_ATTR_PERM_ADDR, + HWSIM_ATTR_IFTYPE_SUPPORT, + HWSIM_ATTR_CIPHER_SUPPORT, + HWSIM_ATTR_MLO_SUPPORT, + HWSIM_ATTR_PMSR_SUPPORT, + HWSIM_ATTR_PMSR_REQUEST, + HWSIM_ATTR_PMSR_RESULT, + __HWSIM_ATTR_MAX, +}; +#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1) + +/** + * struct hwsim_tx_rate - rate selection/status + * + * @idx: rate index to attempt to send with + * @count: number of tries in this rate before going to the next rate + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate and number of retries used. + * + */ +struct hwsim_tx_rate { + s8 idx; + u8 count; +} __packed; + +/** + * enum hwsim_tx_rate_flags - per-rate flags set by the rate control algorithm. + * Inspired by structure mac80211_rate_control_flags. New flags may be + * appended, but old flags not deleted, to keep compatibility for + * userspace. + * + * These flags are set by the Rate control algorithm for each rate during tx, + * in the @flags member of struct ieee80211_tx_rate. + * + * @MAC80211_HWSIM_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate. + * @MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required. + * This is set if the current BSS requires ERP protection. + * @MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE: Use short preamble. + * @MAC80211_HWSIM_TX_RC_MCS: HT rate. + * @MAC80211_HWSIM_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is + * split into a higher 4 bits (Nss) and lower 4 bits (MCS number) + * @MAC80211_HWSIM_TX_RC_GREEN_FIELD: Indicates whether this rate should be used + * in Greenfield mode. + * @MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be + * 40 MHz. + * @MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission + * @MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission + * (80+80 isn't supported yet) + * @MAC80211_HWSIM_TX_RC_DUP_DATA: The frame should be transmitted on both of + * the adjacent 20 MHz channels, if the current channel type is + * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS. + * @MAC80211_HWSIM_TX_RC_SHORT_GI: Short Guard interval should be used for this + * rate. + */ +enum hwsim_tx_rate_flags { + MAC80211_HWSIM_TX_RC_USE_RTS_CTS = BIT(0), + MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT = BIT(1), + MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE = BIT(2), + + /* rate index is an HT/VHT MCS instead of an index */ + MAC80211_HWSIM_TX_RC_MCS = BIT(3), + MAC80211_HWSIM_TX_RC_GREEN_FIELD = BIT(4), + MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH = BIT(5), + MAC80211_HWSIM_TX_RC_DUP_DATA = BIT(6), + MAC80211_HWSIM_TX_RC_SHORT_GI = BIT(7), + MAC80211_HWSIM_TX_RC_VHT_MCS = BIT(8), + MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH = BIT(9), + MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH = BIT(10), +}; + +/** + * struct hwsim_tx_rate - rate selection/status + * + * @idx: rate index to attempt to send with + * @count: number of tries in this rate before going to the next rate + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate and number of retries used. + * + */ +struct hwsim_tx_rate_flag { + s8 idx; + u16 flags; +} __packed; + +/** + * DOC: Frame transmission support over virtio + * + * Frame transmission is also supported over virtio to allow communication + * with external entities. + */ + +/** + * enum hwsim_vqs - queues for virtio frame transmission + * + * @HWSIM_VQ_TX: send frames to external entity + * @HWSIM_VQ_RX: receive frames and transmission info reports + * @HWSIM_NUM_VQS: enum limit + */ +enum { + HWSIM_VQ_TX, + HWSIM_VQ_RX, + HWSIM_NUM_VQS, +}; + +/** + * enum hwsim_rate_info -- bitrate information. + * + * Information about a receiving or transmitting bitrate + * that can be mapped to struct rate_info + * + * @HWSIM_RATE_INFO_ATTR_FLAGS: bitflag of flags from &enum rate_info_flags + * @HWSIM_RATE_INFO_ATTR_MCS: mcs index if struct describes an HT/VHT/HE rate + * @HWSIM_RATE_INFO_ATTR_LEGACY: bitrate in 100kbit/s for 802.11abg + * @HWSIM_RATE_INFO_ATTR_NSS: number of streams (VHT & HE only) + * @HWSIM_RATE_INFO_ATTR_BW: bandwidth (from &enum rate_info_bw) + * @HWSIM_RATE_INFO_ATTR_HE_GI: HE guard interval (from &enum nl80211_he_gi) + * @HWSIM_RATE_INFO_ATTR_HE_DCM: HE DCM value + * @HWSIM_RATE_INFO_ATTR_HE_RU_ALLOC: HE RU allocation (from &enum nl80211_he_ru_alloc, + * only valid if bw is %RATE_INFO_BW_HE_RU) + * @HWSIM_RATE_INFO_ATTR_N_BOUNDED_CH: In case of EDMG the number of bonded channels (1-4) + * @HWSIM_RATE_INFO_ATTR_EHT_GI: EHT guard interval (from &enum nl80211_eht_gi) + * @HWSIM_RATE_INFO_ATTR_EHT_RU_ALLOC: EHT RU allocation (from &enum nl80211_eht_ru_alloc, + * only valid if bw is %RATE_INFO_BW_EHT_RU) + * @NUM_HWSIM_RATE_INFO_ATTRS: internal + * @HWSIM_RATE_INFO_ATTR_MAX: highest attribute number + */ +enum hwsim_rate_info_attributes { + __HWSIM_RATE_INFO_ATTR_INVALID, + + HWSIM_RATE_INFO_ATTR_FLAGS, + HWSIM_RATE_INFO_ATTR_MCS, + HWSIM_RATE_INFO_ATTR_LEGACY, + HWSIM_RATE_INFO_ATTR_NSS, + HWSIM_RATE_INFO_ATTR_BW, + HWSIM_RATE_INFO_ATTR_HE_GI, + HWSIM_RATE_INFO_ATTR_HE_DCM, + HWSIM_RATE_INFO_ATTR_HE_RU_ALLOC, + HWSIM_RATE_INFO_ATTR_N_BOUNDED_CH, + HWSIM_RATE_INFO_ATTR_EHT_GI, + HWSIM_RATE_INFO_ATTR_EHT_RU_ALLOC, + + /* keep last */ + NUM_HWSIM_RATE_INFO_ATTRS, + HWSIM_RATE_INFO_ATTR_MAX = NUM_HWSIM_RATE_INFO_ATTRS - 1 +}; + +#endif /* __MAC80211_HWSIM_H */ |