summaryrefslogtreecommitdiffstats
path: root/drivers/pci/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/pci/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/pci/Kconfig')
-rw-r--r--drivers/pci/Kconfig295
1 files changed, 295 insertions, 0 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
new file mode 100644
index 0000000000..e9ae66cc41
--- /dev/null
+++ b/drivers/pci/Kconfig
@@ -0,0 +1,295 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# PCI configuration
+#
+
+# select this to offer the PCI prompt
+config HAVE_PCI
+ bool
+
+# select this to unconditionally force on PCI support
+config FORCE_PCI
+ bool
+ select HAVE_PCI
+ select PCI
+
+menuconfig PCI
+ bool "PCI support"
+ depends on HAVE_PCI
+ help
+ This option enables support for the PCI local bus, including
+ support for PCI-X and the foundations for PCI Express support.
+ Say 'Y' here unless you know what you are doing.
+
+if PCI
+
+config PCI_DOMAINS
+ bool
+ depends on PCI
+
+config PCI_DOMAINS_GENERIC
+ bool
+ select PCI_DOMAINS
+
+config PCI_SYSCALL
+ bool
+
+source "drivers/pci/pcie/Kconfig"
+
+config PCI_MSI
+ bool "Message Signaled Interrupts (MSI and MSI-X)"
+ select GENERIC_MSI_IRQ
+ help
+ This allows device drivers to enable MSI (Message Signaled
+ Interrupts). Message Signaled Interrupts enable a device to
+ generate an interrupt using an inbound Memory Write on its
+ PCI bus instead of asserting a device IRQ pin.
+
+ Use of PCI MSI interrupts can be disabled at kernel boot time
+ by using the 'pci=nomsi' option. This disables MSI for the
+ entire system.
+
+ If you don't know what to do here, say Y.
+
+config PCI_MSI_ARCH_FALLBACKS
+ bool
+
+config PCI_QUIRKS
+ default y
+ bool "Enable PCI quirk workarounds" if EXPERT
+ help
+ This enables workarounds for various PCI chipset bugs/quirks.
+ Disable this only if your target machine is unaffected by PCI
+ quirks.
+
+config PCI_DEBUG
+ bool "PCI Debugging"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here if you want the PCI core to produce a bunch of debug
+ messages to the system log. Select this if you are having a
+ problem with PCI support and want to see more of what is going on.
+
+ When in doubt, say N.
+
+config PCI_REALLOC_ENABLE_AUTO
+ bool "Enable PCI resource re-allocation detection"
+ depends on PCI_IOV
+ help
+ Say Y here if you want the PCI core to detect if PCI resource
+ re-allocation needs to be enabled. You can always use pci=realloc=on
+ or pci=realloc=off to override it. It will automatically
+ re-allocate PCI resources if SR-IOV BARs have not been allocated by
+ the BIOS.
+
+ When in doubt, say N.
+
+config PCI_STUB
+ tristate "PCI Stub driver"
+ help
+ Say Y or M here if you want be able to reserve a PCI device
+ when it is going to be assigned to a guest operating system.
+
+ When in doubt, say N.
+
+config PCI_PF_STUB
+ tristate "PCI PF Stub driver"
+ depends on PCI_IOV
+ help
+ Say Y or M here if you want to enable support for devices that
+ require SR-IOV support, while at the same time the PF (Physical
+ Function) itself is not providing any actual services on the
+ host itself such as storage or networking.
+
+ When in doubt, say N.
+
+config XEN_PCIDEV_FRONTEND
+ tristate "Xen PCI Frontend"
+ depends on XEN_PV
+ select PCI_XEN
+ select XEN_XENBUS_FRONTEND
+ default y
+ help
+ The PCI device frontend driver allows the kernel to import arbitrary
+ PCI devices from a PCI backend to support PCI driver domains.
+
+config PCI_ATS
+ bool
+
+config PCI_DOE
+ bool
+
+config PCI_ECAM
+ bool
+
+config PCI_LOCKLESS_CONFIG
+ bool
+
+config PCI_BRIDGE_EMUL
+ bool
+
+config PCI_IOV
+ bool "PCI IOV support"
+ select PCI_ATS
+ help
+ I/O Virtualization is a PCI feature supported by some devices
+ which allows them to create virtual devices which share their
+ physical resources.
+
+ If unsure, say N.
+
+config PCI_PRI
+ bool "PCI PRI support"
+ select PCI_ATS
+ help
+ PRI is the PCI Page Request Interface. It allows PCI devices that are
+ behind an IOMMU to recover from page faults.
+
+ If unsure, say N.
+
+config PCI_PASID
+ bool "PCI PASID support"
+ select PCI_ATS
+ help
+ Process Address Space Identifiers (PASIDs) can be used by PCI devices
+ to access more than one IO address space at the same time. To make
+ use of this feature an IOMMU is required which also supports PASIDs.
+ Select this option if you have such an IOMMU and want to compile the
+ driver for it into your kernel.
+
+ If unsure, say N.
+
+config PCI_P2PDMA
+ bool "PCI peer-to-peer transfer support"
+ depends on ZONE_DEVICE
+ #
+ # The need for the scatterlist DMA bus address flag means PCI P2PDMA
+ # requires 64bit
+ #
+ depends on 64BIT
+ select GENERIC_ALLOCATOR
+ select NEED_SG_DMA_FLAGS
+ help
+ Enableѕ drivers to do PCI peer-to-peer transactions to and from
+ BARs that are exposed in other devices that are the part of
+ the hierarchy where peer-to-peer DMA is guaranteed by the PCI
+ specification to work (ie. anything below a single PCI bridge).
+
+ Many PCIe root complexes do not support P2P transactions and
+ it's hard to tell which support it at all, so at this time,
+ P2P DMA transactions must be between devices behind the same root
+ port.
+
+ If unsure, say N.
+
+config PCI_LABEL
+ def_bool y if (DMI || ACPI)
+ select NLS
+
+config PCI_HYPERV
+ tristate "Hyper-V PCI Frontend"
+ depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && SYSFS
+ select PCI_HYPERV_INTERFACE
+ help
+ The PCI device frontend driver allows the kernel to import arbitrary
+ PCI devices from a PCI backend to support PCI driver domains.
+
+config PCI_DYNAMIC_OF_NODES
+ bool "Create Device tree nodes for PCI devices"
+ depends on OF_IRQ
+ select OF_DYNAMIC
+ help
+ This option enables support for generating device tree nodes for some
+ PCI devices. Thus, the driver of this kind can load and overlay
+ flattened device tree for its downstream devices.
+
+ Once this option is selected, the device tree nodes will be generated
+ for all PCI bridges.
+
+choice
+ prompt "PCI Express hierarchy optimization setting"
+ default PCIE_BUS_DEFAULT
+ depends on PCI && EXPERT
+ help
+ MPS (Max Payload Size) and MRRS (Max Read Request Size) are PCIe
+ device parameters that affect performance and the ability to
+ support hotplug and peer-to-peer DMA.
+
+ The following choices set the MPS and MRRS optimization strategy
+ at compile-time. The choices are the same as those offered for
+ the kernel command-line parameter 'pci', i.e.,
+ 'pci=pcie_bus_tune_off', 'pci=pcie_bus_safe',
+ 'pci=pcie_bus_perf', and 'pci=pcie_bus_peer2peer'.
+
+ This is a compile-time setting and can be overridden by the above
+ command-line parameters. If unsure, choose PCIE_BUS_DEFAULT.
+
+config PCIE_BUS_TUNE_OFF
+ bool "Tune Off"
+ depends on PCI
+ help
+ Use the BIOS defaults; don't touch MPS at all. This is the same
+ as booting with 'pci=pcie_bus_tune_off'.
+
+config PCIE_BUS_DEFAULT
+ bool "Default"
+ depends on PCI
+ help
+ Default choice; ensure that the MPS matches upstream bridge.
+
+config PCIE_BUS_SAFE
+ bool "Safe"
+ depends on PCI
+ help
+ Use largest MPS that boot-time devices support. If you have a
+ closed system with no possibility of adding new devices, this
+ will use the largest MPS that's supported by all devices. This
+ is the same as booting with 'pci=pcie_bus_safe'.
+
+config PCIE_BUS_PERFORMANCE
+ bool "Performance"
+ depends on PCI
+ help
+ Use MPS and MRRS for best performance. Ensure that a given
+ device's MPS is no larger than its parent MPS, which allows us to
+ keep all switches/bridges to the max MPS supported by their
+ parent. This is the same as booting with 'pci=pcie_bus_perf'.
+
+config PCIE_BUS_PEER2PEER
+ bool "Peer2peer"
+ depends on PCI
+ help
+ Set MPS = 128 for all devices. MPS configuration effected by the
+ other options could cause the MPS on one root port to be
+ different than that of the MPS on another, which may cause
+ hot-added devices or peer-to-peer DMA to fail. Set MPS to the
+ smallest possible value (128B) system-wide to avoid these issues.
+ This is the same as booting with 'pci=pcie_bus_peer2peer'.
+
+endchoice
+
+config VGA_ARB
+ bool "VGA Arbitration" if EXPERT
+ default y
+ depends on (PCI && !S390)
+ help
+ Some "legacy" VGA devices implemented on PCI typically have the same
+ hard-decoded addresses as they did on ISA. When multiple PCI devices
+ are accessed at same time they need some kind of coordination. Please
+ see Documentation/gpu/vgaarbiter.rst for more details. Select this to
+ enable VGA arbiter.
+
+config VGA_ARB_MAX_GPUS
+ int "Maximum number of GPUs"
+ default 16
+ depends on VGA_ARB
+ help
+ Reserves space in the kernel to maintain resource locking for
+ multiple GPUS. The overhead for each GPU is very small.
+
+source "drivers/pci/hotplug/Kconfig"
+source "drivers/pci/controller/Kconfig"
+source "drivers/pci/endpoint/Kconfig"
+source "drivers/pci/switch/Kconfig"
+
+endif