Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1612 insertions, 0 deletions

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
new file mode 100644
index 0000000000..74703362ae
--- /dev/null
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -0,0 +1,1612 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Freescale i.MX6 SoCs
+ *
+ * Copyright (C) 2013 Kosagi
+ *		https://www.kosagi.com
+ *
+ * Author: Sean Cross <xobs@kosagi.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#include "pcie-designware.h"
+
+#define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
+#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN	BIT(10)
+#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE	BIT(11)
+#define IMX8MQ_GPR_PCIE_VREG_BYPASS		BIT(12)
+#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE	GENMASK(11, 8)
+#define IMX8MQ_PCIE2_BASE_ADDR			0x33c00000
+
+#define to_imx6_pcie(x)	dev_get_drvdata((x)->dev)
+
+enum imx6_pcie_variants {
+	IMX6Q,
+	IMX6SX,
+	IMX6QP,
+	IMX7D,
+	IMX8MQ,
+	IMX8MM,
+	IMX8MP,
+	IMX8MQ_EP,
+	IMX8MM_EP,
+	IMX8MP_EP,
+};
+
+#define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
+#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE	BIT(1)
+#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND		BIT(2)
+
+struct imx6_pcie_drvdata {
+	enum imx6_pcie_variants variant;
+	enum dw_pcie_device_mode mode;
+	u32 flags;
+	int dbi_length;
+	const char *gpr;
+};
+
+struct imx6_pcie {
+	struct dw_pcie		*pci;
+	int			reset_gpio;
+	bool			gpio_active_high;
+	bool			link_is_up;
+	struct clk		*pcie_bus;
+	struct clk		*pcie_phy;
+	struct clk		*pcie_inbound_axi;
+	struct clk		*pcie;
+	struct clk		*pcie_aux;
+	struct regmap		*iomuxc_gpr;
+	u16			msi_ctrl;
+	u32			controller_id;
+	struct reset_control	*pciephy_reset;
+	struct reset_control	*apps_reset;
+	struct reset_control	*turnoff_reset;
+	u32			tx_deemph_gen1;
+	u32			tx_deemph_gen2_3p5db;
+	u32			tx_deemph_gen2_6db;
+	u32			tx_swing_full;
+	u32			tx_swing_low;
+	struct regulator	*vpcie;
+	struct regulator	*vph;
+	void __iomem		*phy_base;
+
+	/* power domain for pcie */
+	struct device		*pd_pcie;
+	/* power domain for pcie phy */
+	struct device		*pd_pcie_phy;
+	struct phy		*phy;
+	const struct imx6_pcie_drvdata *drvdata;
+};
+
+/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
+#define PHY_PLL_LOCK_WAIT_USLEEP_MAX	200
+#define PHY_PLL_LOCK_WAIT_TIMEOUT	(2000 * PHY_PLL_LOCK_WAIT_USLEEP_MAX)
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PL_OFFSET 0x700
+
+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
+#define PCIE_PHY_CTRL_DATA(x)		FIELD_PREP(GENMASK(15, 0), (x))
+#define PCIE_PHY_CTRL_CAP_ADR		BIT(16)
+#define PCIE_PHY_CTRL_CAP_DAT		BIT(17)
+#define PCIE_PHY_CTRL_WR		BIT(18)
+#define PCIE_PHY_CTRL_RD		BIT(19)
+
+#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
+#define PCIE_PHY_STAT_ACK		BIT(16)
+
+/* PHY registers (not memory-mapped) */
+#define PCIE_PHY_ATEOVRD			0x10
+#define  PCIE_PHY_ATEOVRD_EN			BIT(2)
+#define  PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT	0
+#define  PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK	0x1
+
+#define PCIE_PHY_MPLL_OVRD_IN_LO		0x11
+#define  PCIE_PHY_MPLL_MULTIPLIER_SHIFT		2
+#define  PCIE_PHY_MPLL_MULTIPLIER_MASK		0x7f
+#define  PCIE_PHY_MPLL_MULTIPLIER_OVRD		BIT(9)
+
+#define PCIE_PHY_RX_ASIC_OUT 0x100D
+#define PCIE_PHY_RX_ASIC_OUT_VALID	(1 << 0)
+
+/* iMX7 PCIe PHY registers */
+#define PCIE_PHY_CMN_REG4		0x14
+/* These are probably the bits that *aren't* DCC_FB_EN */
+#define PCIE_PHY_CMN_REG4_DCC_FB_EN	0x29
+
+#define PCIE_PHY_CMN_REG15	        0x54
+#define PCIE_PHY_CMN_REG15_DLY_4	BIT(2)
+#define PCIE_PHY_CMN_REG15_PLL_PD	BIT(5)
+#define PCIE_PHY_CMN_REG15_OVRD_PLL_PD	BIT(7)
+
+#define PCIE_PHY_CMN_REG24		0x90
+#define PCIE_PHY_CMN_REG24_RX_EQ	BIT(6)
+#define PCIE_PHY_CMN_REG24_RX_EQ_SEL	BIT(3)
+
+#define PCIE_PHY_CMN_REG26		0x98
+#define PCIE_PHY_CMN_REG26_ATT_MODE	0xBC
+
+#define PHY_RX_OVRD_IN_LO 0x1005
+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN		BIT(5)
+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN		BIT(3)
+
+static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
+{
+	WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
+		imx6_pcie->drvdata->variant != IMX8MQ_EP &&
+		imx6_pcie->drvdata->variant != IMX8MM &&
+		imx6_pcie->drvdata->variant != IMX8MM_EP &&
+		imx6_pcie->drvdata->variant != IMX8MP &&
+		imx6_pcie->drvdata->variant != IMX8MP_EP);
+	return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
+}
+
+static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
+{
+	unsigned int mask, val, mode;
+
+	if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
+		mode = PCI_EXP_TYPE_ENDPOINT;
+	else
+		mode = PCI_EXP_TYPE_ROOT_PORT;
+
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX8MQ:
+	case IMX8MQ_EP:
+		if (imx6_pcie->controller_id == 1) {
+			mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
+			val  = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+					  mode);
+		} else {
+			mask = IMX6Q_GPR12_DEVICE_TYPE;
+			val  = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
+		}
+		break;
+	default:
+		mask = IMX6Q_GPR12_DEVICE_TYPE;
+		val  = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
+		break;
+	}
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
+}
+
+static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	bool val;
+	u32 max_iterations = 10;
+	u32 wait_counter = 0;
+
+	do {
+		val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT) &
+			PCIE_PHY_STAT_ACK;
+		wait_counter++;
+
+		if (val == exp_val)
+			return 0;
+
+		udelay(1);
+	} while (wait_counter < max_iterations);
+
+	return -ETIMEDOUT;
+}
+
+static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	u32 val;
+	int ret;
+
+	val = PCIE_PHY_CTRL_DATA(addr);
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
+
+	val |= PCIE_PHY_CTRL_CAP_ADR;
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
+
+	ret = pcie_phy_poll_ack(imx6_pcie, true);
+	if (ret)
+		return ret;
+
+	val = PCIE_PHY_CTRL_DATA(addr);
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
+
+	return pcie_phy_poll_ack(imx6_pcie, false);
+}
+
+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
+static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	u32 phy_ctl;
+	int ret;
+
+	ret = pcie_phy_wait_ack(imx6_pcie, addr);
+	if (ret)
+		return ret;
+
+	/* assert Read signal */
+	phy_ctl = PCIE_PHY_CTRL_RD;
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, phy_ctl);
+
+	ret = pcie_phy_poll_ack(imx6_pcie, true);
+	if (ret)
+		return ret;
+
+	*data = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT);
+
+	/* deassert Read signal */
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00);
+
+	return pcie_phy_poll_ack(imx6_pcie, false);
+}
+
+static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	u32 var;
+	int ret;
+
+	/* write addr */
+	/* cap addr */
+	ret = pcie_phy_wait_ack(imx6_pcie, addr);
+	if (ret)
+		return ret;
+
+	var = PCIE_PHY_CTRL_DATA(data);
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
+
+	/* capture data */
+	var |= PCIE_PHY_CTRL_CAP_DAT;
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
+
+	ret = pcie_phy_poll_ack(imx6_pcie, true);
+	if (ret)
+		return ret;
+
+	/* deassert cap data */
+	var = PCIE_PHY_CTRL_DATA(data);
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
+
+	/* wait for ack de-assertion */
+	ret = pcie_phy_poll_ack(imx6_pcie, false);
+	if (ret)
+		return ret;
+
+	/* assert wr signal */
+	var = PCIE_PHY_CTRL_WR;
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
+
+	/* wait for ack */
+	ret = pcie_phy_poll_ack(imx6_pcie, true);
+	if (ret)
+		return ret;
+
+	/* deassert wr signal */
+	var = PCIE_PHY_CTRL_DATA(data);
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
+
+	/* wait for ack de-assertion */
+	ret = pcie_phy_poll_ack(imx6_pcie, false);
+	if (ret)
+		return ret;
+
+	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x0);
+
+	return 0;
+}
+
+static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+{
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		/*
+		 * The PHY initialization had been done in the PHY
+		 * driver, break here directly.
+		 */
+		break;
+	case IMX8MQ:
+	case IMX8MQ_EP:
+		/*
+		 * TODO: Currently this code assumes external
+		 * oscillator is being used
+		 */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr,
+				   imx6_pcie_grp_offset(imx6_pcie),
+				   IMX8MQ_GPR_PCIE_REF_USE_PAD,
+				   IMX8MQ_GPR_PCIE_REF_USE_PAD);
+		/*
+		 * Regarding the datasheet, the PCIE_VPH is suggested
+		 * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
+		 * VREG_BYPASS should be cleared to zero.
+		 */
+		if (imx6_pcie->vph &&
+		    regulator_get_voltage(imx6_pcie->vph) > 3000000)
+			regmap_update_bits(imx6_pcie->iomuxc_gpr,
+					   imx6_pcie_grp_offset(imx6_pcie),
+					   IMX8MQ_GPR_PCIE_VREG_BYPASS,
+					   0);
+		break;
+	case IMX7D:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
+		break;
+	case IMX6SX:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6SX_GPR12_PCIE_RX_EQ_MASK,
+				   IMX6SX_GPR12_PCIE_RX_EQ_2);
+		fallthrough;
+	default:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
+
+		/* configure constant input signal to the pcie ctrl and phy */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
+
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_DEEMPH_GEN1,
+				   imx6_pcie->tx_deemph_gen1 << 0);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+				   imx6_pcie->tx_deemph_gen2_3p5db << 6);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+				   imx6_pcie->tx_deemph_gen2_6db << 12);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_SWING_FULL,
+				   imx6_pcie->tx_swing_full << 18);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_SWING_LOW,
+				   imx6_pcie->tx_swing_low << 25);
+		break;
+	}
+
+	imx6_pcie_configure_type(imx6_pcie);
+}
+
+static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
+{
+	u32 val;
+	struct device *dev = imx6_pcie->pci->dev;
+
+	if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
+				     IOMUXC_GPR22, val,
+				     val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
+				     PHY_PLL_LOCK_WAIT_USLEEP_MAX,
+				     PHY_PLL_LOCK_WAIT_TIMEOUT))
+		dev_err(dev, "PCIe PLL lock timeout\n");
+}
+
+static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
+{
+	unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
+	int mult, div;
+	u16 val;
+
+	if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
+		return 0;
+
+	switch (phy_rate) {
+	case 125000000:
+		/*
+		 * The default settings of the MPLL are for a 125MHz input
+		 * clock, so no need to reconfigure anything in that case.
+		 */
+		return 0;
+	case 100000000:
+		mult = 25;
+		div = 0;
+		break;
+	case 200000000:
+		mult = 25;
+		div = 1;
+		break;
+	default:
+		dev_err(imx6_pcie->pci->dev,
+			"Unsupported PHY reference clock rate %lu\n", phy_rate);
+		return -EINVAL;
+	}
+
+	pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
+	val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
+		 PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
+	val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
+	val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
+	pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
+
+	pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
+	val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
+		 PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
+	val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
+	val |= PCIE_PHY_ATEOVRD_EN;
+	pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
+
+	return 0;
+}
+
+static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
+{
+	u16 tmp;
+
+	if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
+		return;
+
+	pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
+	tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+		PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+	pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
+
+	usleep_range(2000, 3000);
+
+	pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
+	tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+		  PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+	pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
+}
+
+#ifdef CONFIG_ARM
+/*  Added for PCI abort handling */
+static int imx6q_pcie_abort_handler(unsigned long addr,
+		unsigned int fsr, struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+	unsigned long instr = *(unsigned long *)pc;
+	int reg = (instr >> 12) & 15;
+
+	/*
+	 * If the instruction being executed was a read,
+	 * make it look like it read all-ones.
+	 */
+	if ((instr & 0x0c100000) == 0x04100000) {
+		unsigned long val;
+
+		if (instr & 0x00400000)
+			val = 255;
+		else
+			val = -1;
+
+		regs->uregs[reg] = val;
+		regs->ARM_pc += 4;
+		return 0;
+	}
+
+	if ((instr & 0x0e100090) == 0x00100090) {
+		regs->uregs[reg] = -1;
+		regs->ARM_pc += 4;
+		return 0;
+	}
+
+	return 1;
+}
+#endif
+
+static int imx6_pcie_attach_pd(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct device_link *link;
+
+	/* Do nothing when in a single power domain */
+	if (dev->pm_domain)
+		return 0;
+
+	imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie");
+	if (IS_ERR(imx6_pcie->pd_pcie))
+		return PTR_ERR(imx6_pcie->pd_pcie);
+	/* Do nothing when power domain missing */
+	if (!imx6_pcie->pd_pcie)
+		return 0;
+	link = device_link_add(dev, imx6_pcie->pd_pcie,
+			DL_FLAG_STATELESS |
+			DL_FLAG_PM_RUNTIME |
+			DL_FLAG_RPM_ACTIVE);
+	if (!link) {
+		dev_err(dev, "Failed to add device_link to pcie pd.\n");
+		return -EINVAL;
+	}
+
+	imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy");
+	if (IS_ERR(imx6_pcie->pd_pcie_phy))
+		return PTR_ERR(imx6_pcie->pd_pcie_phy);
+
+	link = device_link_add(dev, imx6_pcie->pd_pcie_phy,
+			DL_FLAG_STATELESS |
+			DL_FLAG_PM_RUNTIME |
+			DL_FLAG_RPM_ACTIVE);
+	if (!link) {
+		dev_err(dev, "Failed to add device_link to pcie_phy pd.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	struct device *dev = pci->dev;
+	unsigned int offset;
+	int ret = 0;
+
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX6SX:
+		ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
+		if (ret) {
+			dev_err(dev, "unable to enable pcie_axi clock\n");
+			break;
+		}
+
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
+		break;
+	case IMX6QP:
+	case IMX6Q:
+		/* power up core phy and enable ref clock */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+		/*
+		 * the async reset input need ref clock to sync internally,
+		 * when the ref clock comes after reset, internal synced
+		 * reset time is too short, cannot meet the requirement.
+		 * add one ~10us delay here.
+		 */
+		usleep_range(10, 100);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
+		break;
+	case IMX7D:
+		break;
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MQ:
+	case IMX8MQ_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		ret = clk_prepare_enable(imx6_pcie->pcie_aux);
+		if (ret) {
+			dev_err(dev, "unable to enable pcie_aux clock\n");
+			break;
+		}
+
+		offset = imx6_pcie_grp_offset(imx6_pcie);
+		/*
+		 * Set the over ride low and enabled
+		 * make sure that REF_CLK is turned on.
+		 */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
+				   0);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
+				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
+		break;
+	}
+
+	return ret;
+}
+
+static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
+{
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX6SX:
+		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
+		break;
+	case IMX6QP:
+	case IMX6Q:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				IMX6Q_GPR1_PCIE_TEST_PD,
+				IMX6Q_GPR1_PCIE_TEST_PD);
+		break;
+	case IMX7D:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+		break;
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MQ:
+	case IMX8MQ_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		clk_disable_unprepare(imx6_pcie->pcie_aux);
+		break;
+	default:
+		break;
+	}
+}
+
+static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	struct device *dev = pci->dev;
+	int ret;
+
+	ret = clk_prepare_enable(imx6_pcie->pcie_phy);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie_phy clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(imx6_pcie->pcie_bus);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie_bus clock\n");
+		goto err_pcie_bus;
+	}
+
+	ret = clk_prepare_enable(imx6_pcie->pcie);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie clock\n");
+		goto err_pcie;
+	}
+
+	ret = imx6_pcie_enable_ref_clk(imx6_pcie);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie ref clock\n");
+		goto err_ref_clk;
+	}
+
+	/* allow the clocks to stabilize */
+	usleep_range(200, 500);
+	return 0;
+
+err_ref_clk:
+	clk_disable_unprepare(imx6_pcie->pcie);
+err_pcie:
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+err_pcie_bus:
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+
+	return ret;
+}
+
+static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+{
+	imx6_pcie_disable_ref_clk(imx6_pcie);
+	clk_disable_unprepare(imx6_pcie->pcie);
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+}
+
+static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
+{
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX7D:
+	case IMX8MQ:
+	case IMX8MQ_EP:
+		reset_control_assert(imx6_pcie->pciephy_reset);
+		fallthrough;
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
+	case IMX6SX:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
+				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
+		/* Force PCIe PHY reset */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
+				   IMX6SX_GPR5_PCIE_BTNRST_RESET,
+				   IMX6SX_GPR5_PCIE_BTNRST_RESET);
+		break;
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_SW_RST,
+				   IMX6Q_GPR1_PCIE_SW_RST);
+		break;
+	case IMX6Q:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
+		break;
+	}
+
+	/* Some boards don't have PCIe reset GPIO. */
+	if (gpio_is_valid(imx6_pcie->reset_gpio))
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+					imx6_pcie->gpio_active_high);
+}
+
+static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	struct device *dev = pci->dev;
+
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX8MQ:
+	case IMX8MQ_EP:
+		reset_control_deassert(imx6_pcie->pciephy_reset);
+		break;
+	case IMX7D:
+		reset_control_deassert(imx6_pcie->pciephy_reset);
+
+		/* Workaround for ERR010728, failure of PCI-e PLL VCO to
+		 * oscillate, especially when cold.  This turns off "Duty-cycle
+		 * Corrector" and other mysterious undocumented things.
+		 */
+		if (likely(imx6_pcie->phy_base)) {
+			/* De-assert DCC_FB_EN */
+			writel(PCIE_PHY_CMN_REG4_DCC_FB_EN,
+			       imx6_pcie->phy_base + PCIE_PHY_CMN_REG4);
+			/* Assert RX_EQS and RX_EQS_SEL */
+			writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL
+				| PCIE_PHY_CMN_REG24_RX_EQ,
+			       imx6_pcie->phy_base + PCIE_PHY_CMN_REG24);
+			/* Assert ATT_MODE */
+			writel(PCIE_PHY_CMN_REG26_ATT_MODE,
+			       imx6_pcie->phy_base + PCIE_PHY_CMN_REG26);
+		} else {
+			dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
+		}
+
+		imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
+		break;
+	case IMX6SX:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
+				   IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
+		break;
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_SW_RST, 0);
+
+		usleep_range(200, 500);
+		break;
+	case IMX6Q:		/* Nothing to do */
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		break;
+	}
+
+	/* Some boards don't have PCIe reset GPIO. */
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		msleep(100);
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+					!imx6_pcie->gpio_active_high);
+		/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
+		msleep(100);
+	}
+
+	return 0;
+}
+
+static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	struct device *dev = pci->dev;
+	u32 tmp;
+	unsigned int retries;
+
+	for (retries = 0; retries < 200; retries++) {
+		tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+		/* Test if the speed change finished. */
+		if (!(tmp & PORT_LOGIC_SPEED_CHANGE))
+			return 0;
+		usleep_range(100, 1000);
+	}
+
+	dev_err(dev, "Speed change timeout\n");
+	return -ETIMEDOUT;
+}
+
+static void imx6_pcie_ltssm_enable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2,
+				   IMX6Q_GPR12_PCIE_CTL_2);
+		break;
+	case IMX7D:
+	case IMX8MQ:
+	case IMX8MQ_EP:
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		reset_control_deassert(imx6_pcie->apps_reset);
+		break;
+	}
+}
+
+static void imx6_pcie_ltssm_disable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0);
+		break;
+	case IMX7D:
+	case IMX8MQ:
+	case IMX8MQ_EP:
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
+	}
+}
+
+static int imx6_pcie_start_link(struct dw_pcie *pci)
+{
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+	struct device *dev = pci->dev;
+	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	u32 tmp;
+	int ret;
+
+	/*
+	 * Force Gen1 operation when starting the link.  In case the link is
+	 * started in Gen2 mode, there is a possibility the devices on the
+	 * bus will not be detected at all.  This happens with PCIe switches.
+	 */
+	dw_pcie_dbi_ro_wr_en(pci);
+	tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+	tmp &= ~PCI_EXP_LNKCAP_SLS;
+	tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
+	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
+	dw_pcie_dbi_ro_wr_dis(pci);
+
+	/* Start LTSSM. */
+	imx6_pcie_ltssm_enable(dev);
+
+	ret = dw_pcie_wait_for_link(pci);
+	if (ret)
+		goto err_reset_phy;
+
+	if (pci->link_gen > 1) {
+		/* Allow faster modes after the link is up */
+		dw_pcie_dbi_ro_wr_en(pci);
+		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+		tmp &= ~PCI_EXP_LNKCAP_SLS;
+		tmp |= pci->link_gen;
+		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
+
+		/*
+		 * Start Directed Speed Change so the best possible
+		 * speed both link partners support can be negotiated.
+		 */
+		tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+		tmp |= PORT_LOGIC_SPEED_CHANGE;
+		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
+		dw_pcie_dbi_ro_wr_dis(pci);
+
+		if (imx6_pcie->drvdata->flags &
+		    IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
+			/*
+			 * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
+			 * from i.MX6 family when no link speed transition
+			 * occurs and we go Gen1 -> yep, Gen1. The difference
+			 * is that, in such case, it will not be cleared by HW
+			 * which will cause the following code to report false
+			 * failure.
+			 */
+
+			ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
+			if (ret) {
+				dev_err(dev, "Failed to bring link up!\n");
+				goto err_reset_phy;
+			}
+		}
+
+		/* Make sure link training is finished as well! */
+		ret = dw_pcie_wait_for_link(pci);
+		if (ret)
+			goto err_reset_phy;
+	} else {
+		dev_info(dev, "Link: Only Gen1 is enabled\n");
+	}
+
+	imx6_pcie->link_is_up = true;
+	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
+	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
+	return 0;
+
+err_reset_phy:
+	imx6_pcie->link_is_up = false;
+	dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
+		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
+		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
+	imx6_pcie_reset_phy(imx6_pcie);
+	return 0;
+}
+
+static void imx6_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct device *dev = pci->dev;
+
+	/* Turn off PCIe LTSSM */
+	imx6_pcie_ltssm_disable(dev);
+}
+
+static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct device *dev = pci->dev;
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+	int ret;
+
+	if (imx6_pcie->vpcie) {
+		ret = regulator_enable(imx6_pcie->vpcie);
+		if (ret) {
+			dev_err(dev, "failed to enable vpcie regulator: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	imx6_pcie_assert_core_reset(imx6_pcie);
+	imx6_pcie_init_phy(imx6_pcie);
+
+	ret = imx6_pcie_clk_enable(imx6_pcie);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
+		goto err_reg_disable;
+	}
+
+	if (imx6_pcie->phy) {
+		ret = phy_init(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "pcie PHY power up failed\n");
+			goto err_clk_disable;
+		}
+	}
+
+	if (imx6_pcie->phy) {
+		ret = phy_power_on(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "waiting for PHY ready timeout!\n");
+			goto err_phy_off;
+		}
+	}
+
+	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+	if (ret < 0) {
+		dev_err(dev, "pcie deassert core reset failed: %d\n", ret);
+		goto err_phy_off;
+	}
+
+	imx6_setup_phy_mpll(imx6_pcie);
+
+	return 0;
+
+err_phy_off:
+	if (imx6_pcie->phy)
+		phy_exit(imx6_pcie->phy);
+err_clk_disable:
+	imx6_pcie_clk_disable(imx6_pcie);
+err_reg_disable:
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+	return ret;
+}
+
+static void imx6_pcie_host_exit(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+
+	if (imx6_pcie->phy) {
+		if (phy_power_off(imx6_pcie->phy))
+			dev_err(pci->dev, "unable to power off PHY\n");
+		phy_exit(imx6_pcie->phy);
+	}
+	imx6_pcie_clk_disable(imx6_pcie);
+
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+}
+
+static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
+	.host_init = imx6_pcie_host_init,
+	.host_deinit = imx6_pcie_host_exit,
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = imx6_pcie_start_link,
+	.stop_link = imx6_pcie_stop_link,
+};
+
+static void imx6_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	enum pci_barno bar;
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	for (bar = BAR_0; bar <= BAR_5; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+}
+
+static int imx6_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				  enum pci_epc_irq_type type,
+				  u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
+	case PCI_EPC_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	case PCI_EPC_IRQ_MSIX:
+		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct pci_epc_features imx8m_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+	.reserved_bar = 1 << BAR_1 | 1 << BAR_3,
+	.align = SZ_64K,
+};
+
+static const struct pci_epc_features*
+imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
+{
+	return &imx8m_pcie_epc_features;
+}
+
+static const struct dw_pcie_ep_ops pcie_ep_ops = {
+	.ep_init = imx6_pcie_ep_init,
+	.raise_irq = imx6_pcie_ep_raise_irq,
+	.get_features = imx6_pcie_ep_get_features,
+};
+
+static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
+			   struct platform_device *pdev)
+{
+	int ret;
+	unsigned int pcie_dbi2_offset;
+	struct dw_pcie_ep *ep;
+	struct resource *res;
+	struct dw_pcie *pci = imx6_pcie->pci;
+	struct dw_pcie_rp *pp = &pci->pp;
+	struct device *dev = pci->dev;
+
+	imx6_pcie_host_init(pp);
+	ep = &pci->ep;
+	ep->ops = &pcie_ep_ops;
+
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX8MQ_EP:
+	case IMX8MM_EP:
+	case IMX8MP_EP:
+		pcie_dbi2_offset = SZ_1M;
+		break;
+	default:
+		pcie_dbi2_offset = SZ_4K;
+		break;
+	}
+	pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
+	if (!res)
+		return -EINVAL;
+
+	ep->phys_base = res->start;
+	ep->addr_size = resource_size(res);
+	ep->page_size = SZ_64K;
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "failed to initialize endpoint\n");
+		return ret;
+	}
+	/* Start LTSSM. */
+	imx6_pcie_ltssm_enable(dev);
+
+	return 0;
+}
+
+static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
+{
+	struct device *dev = imx6_pcie->pci->dev;
+
+	/* Some variants have a turnoff reset in DT */
+	if (imx6_pcie->turnoff_reset) {
+		reset_control_assert(imx6_pcie->turnoff_reset);
+		reset_control_deassert(imx6_pcie->turnoff_reset);
+		goto pm_turnoff_sleep;
+	}
+
+	/* Others poke directly at IOMUXC registers */
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
+		break;
+	default:
+		dev_err(dev, "PME_Turn_Off not implemented\n");
+		return;
+	}
+
+	/*
+	 * Components with an upstream port must respond to
+	 * PME_Turn_Off with PME_TO_Ack but we can't check.
+	 *
+	 * The standard recommends a 1-10ms timeout after which to
+	 * proceed anyway as if acks were received.
+	 */
+pm_turnoff_sleep:
+	usleep_range(1000, 10000);
+}
+
+static void imx6_pcie_msi_save_restore(struct imx6_pcie *imx6_pcie, bool save)
+{
+	u8 offset;
+	u16 val;
+	struct dw_pcie *pci = imx6_pcie->pci;
+
+	if (pci_msi_enabled()) {
+		offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
+		if (save) {
+			val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS);
+			imx6_pcie->msi_ctrl = val;
+		} else {
+			dw_pcie_dbi_ro_wr_en(pci);
+			val = imx6_pcie->msi_ctrl;
+			dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val);
+			dw_pcie_dbi_ro_wr_dis(pci);
+		}
+	}
+}
+
+static int imx6_pcie_suspend_noirq(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct dw_pcie_rp *pp = &imx6_pcie->pci->pp;
+
+	if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
+		return 0;
+
+	imx6_pcie_msi_save_restore(imx6_pcie, true);
+	imx6_pcie_pm_turnoff(imx6_pcie);
+	imx6_pcie_stop_link(imx6_pcie->pci);
+	imx6_pcie_host_exit(pp);
+
+	return 0;
+}
+
+static int imx6_pcie_resume_noirq(struct device *dev)
+{
+	int ret;
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct dw_pcie_rp *pp = &imx6_pcie->pci->pp;
+
+	if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
+		return 0;
+
+	ret = imx6_pcie_host_init(pp);
+	if (ret)
+		return ret;
+	imx6_pcie_msi_save_restore(imx6_pcie, false);
+	dw_pcie_setup_rc(pp);
+
+	if (imx6_pcie->link_is_up)
+		imx6_pcie_start_link(imx6_pcie->pci);
+
+	return 0;
+}
+
+static const struct dev_pm_ops imx6_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
+				  imx6_pcie_resume_noirq)
+};
+
+static int imx6_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci;
+	struct imx6_pcie *imx6_pcie;
+	struct device_node *np;
+	struct resource *dbi_base;
+	struct device_node *node = dev->of_node;
+	int ret;
+	u16 val;
+
+	imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
+	if (!imx6_pcie)
+		return -ENOMEM;
+
+	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
+	if (!pci)
+		return -ENOMEM;
+
+	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
+	pci->pp.ops = &imx6_pcie_host_ops;
+
+	imx6_pcie->pci = pci;
+	imx6_pcie->drvdata = of_device_get_match_data(dev);
+
+	/* Find the PHY if one is defined, only imx7d uses it */
+	np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0);
+	if (np) {
+		struct resource res;
+
+		ret = of_address_to_resource(np, 0, &res);
+		if (ret) {
+			dev_err(dev, "Unable to map PCIe PHY\n");
+			return ret;
+		}
+		imx6_pcie->phy_base = devm_ioremap_resource(dev, &res);
+		if (IS_ERR(imx6_pcie->phy_base))
+			return PTR_ERR(imx6_pcie->phy_base);
+	}
+
+	pci->dbi_base = devm_platform_get_and_ioremap_resource(pdev, 0, &dbi_base);
+	if (IS_ERR(pci->dbi_base))
+		return PTR_ERR(pci->dbi_base);
+
+	/* Fetch GPIOs */
+	imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
+	imx6_pcie->gpio_active_high = of_property_read_bool(node,
+						"reset-gpio-active-high");
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
+				imx6_pcie->gpio_active_high ?
+					GPIOF_OUT_INIT_HIGH :
+					GPIOF_OUT_INIT_LOW,
+				"PCIe reset");
+		if (ret) {
+			dev_err(dev, "unable to get reset gpio\n");
+			return ret;
+		}
+	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
+		return imx6_pcie->reset_gpio;
+	}
+
+	/* Fetch clocks */
+	imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus");
+	if (IS_ERR(imx6_pcie->pcie_bus))
+		return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_bus),
+				     "pcie_bus clock source missing or invalid\n");
+
+	imx6_pcie->pcie = devm_clk_get(dev, "pcie");
+	if (IS_ERR(imx6_pcie->pcie))
+		return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie),
+				     "pcie clock source missing or invalid\n");
+
+	switch (imx6_pcie->drvdata->variant) {
+	case IMX6SX:
+		imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
+							   "pcie_inbound_axi");
+		if (IS_ERR(imx6_pcie->pcie_inbound_axi))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_inbound_axi),
+					     "pcie_inbound_axi clock missing or invalid\n");
+		break;
+	case IMX8MQ:
+	case IMX8MQ_EP:
+		imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
+		if (IS_ERR(imx6_pcie->pcie_aux))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
+					     "pcie_aux clock source missing or invalid\n");
+		fallthrough;
+	case IMX7D:
+		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
+			imx6_pcie->controller_id = 1;
+
+		imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
+									    "pciephy");
+		if (IS_ERR(imx6_pcie->pciephy_reset)) {
+			dev_err(dev, "Failed to get PCIEPHY reset control\n");
+			return PTR_ERR(imx6_pcie->pciephy_reset);
+		}
+
+		imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
+									 "apps");
+		if (IS_ERR(imx6_pcie->apps_reset)) {
+			dev_err(dev, "Failed to get PCIE APPS reset control\n");
+			return PTR_ERR(imx6_pcie->apps_reset);
+		}
+		break;
+	case IMX8MM:
+	case IMX8MM_EP:
+	case IMX8MP:
+	case IMX8MP_EP:
+		imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
+		if (IS_ERR(imx6_pcie->pcie_aux))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
+					     "pcie_aux clock source missing or invalid\n");
+		imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
+									 "apps");
+		if (IS_ERR(imx6_pcie->apps_reset))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
+					     "failed to get pcie apps reset control\n");
+
+		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+		if (IS_ERR(imx6_pcie->phy))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+					     "failed to get pcie phy\n");
+
+		break;
+	default:
+		break;
+	}
+	/* Don't fetch the pcie_phy clock, if it has abstract PHY driver */
+	if (imx6_pcie->phy == NULL) {
+		imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
+		if (IS_ERR(imx6_pcie->pcie_phy))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_phy),
+					     "pcie_phy clock source missing or invalid\n");
+	}
+
+
+	/* Grab turnoff reset */
+	imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
+	if (IS_ERR(imx6_pcie->turnoff_reset)) {
+		dev_err(dev, "Failed to get TURNOFF reset control\n");
+		return PTR_ERR(imx6_pcie->turnoff_reset);
+	}
+
+	/* Grab GPR config register range */
+	imx6_pcie->iomuxc_gpr =
+		 syscon_regmap_lookup_by_compatible(imx6_pcie->drvdata->gpr);
+	if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
+		dev_err(dev, "unable to find iomuxc registers\n");
+		return PTR_ERR(imx6_pcie->iomuxc_gpr);
+	}
+
+	/* Grab PCIe PHY Tx Settings */
+	if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
+				 &imx6_pcie->tx_deemph_gen1))
+		imx6_pcie->tx_deemph_gen1 = 0;
+
+	if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
+				 &imx6_pcie->tx_deemph_gen2_3p5db))
+		imx6_pcie->tx_deemph_gen2_3p5db = 0;
+
+	if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
+				 &imx6_pcie->tx_deemph_gen2_6db))
+		imx6_pcie->tx_deemph_gen2_6db = 20;
+
+	if (of_property_read_u32(node, "fsl,tx-swing-full",
+				 &imx6_pcie->tx_swing_full))
+		imx6_pcie->tx_swing_full = 127;
+
+	if (of_property_read_u32(node, "fsl,tx-swing-low",
+				 &imx6_pcie->tx_swing_low))
+		imx6_pcie->tx_swing_low = 127;
+
+	/* Limit link speed */
+	pci->link_gen = 1;
+	of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen);
+
+	imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
+	if (IS_ERR(imx6_pcie->vpcie)) {
+		if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV)
+			return PTR_ERR(imx6_pcie->vpcie);
+		imx6_pcie->vpcie = NULL;
+	}
+
+	imx6_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
+	if (IS_ERR(imx6_pcie->vph)) {
+		if (PTR_ERR(imx6_pcie->vph) != -ENODEV)
+			return PTR_ERR(imx6_pcie->vph);
+		imx6_pcie->vph = NULL;
+	}
+
+	platform_set_drvdata(pdev, imx6_pcie);
+
+	ret = imx6_pcie_attach_pd(dev);
+	if (ret)
+		return ret;
+
+	if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
+		ret = imx6_add_pcie_ep(imx6_pcie, pdev);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = dw_pcie_host_init(&pci->pp);
+		if (ret < 0)
+			return ret;
+
+		if (pci_msi_enabled()) {
+			u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
+
+			val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS);
+			val |= PCI_MSI_FLAGS_ENABLE;
+			dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val);
+		}
+	}
+
+	return 0;
+}
+
+static void imx6_pcie_shutdown(struct platform_device *pdev)
+{
+	struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
+
+	/* bring down link, so bootloader gets clean state in case of reboot */
+	imx6_pcie_assert_core_reset(imx6_pcie);
+}
+
+static const struct imx6_pcie_drvdata drvdata[] = {
+	[IMX6Q] = {
+		.variant = IMX6Q,
+		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
+			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
+		.dbi_length = 0x200,
+		.gpr = "fsl,imx6q-iomuxc-gpr",
+	},
+	[IMX6SX] = {
+		.variant = IMX6SX,
+		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
+			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
+			 IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.gpr = "fsl,imx6q-iomuxc-gpr",
+	},
+	[IMX6QP] = {
+		.variant = IMX6QP,
+		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
+			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
+			 IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.dbi_length = 0x200,
+		.gpr = "fsl,imx6q-iomuxc-gpr",
+	},
+	[IMX7D] = {
+		.variant = IMX7D,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.gpr = "fsl,imx7d-iomuxc-gpr",
+	},
+	[IMX8MQ] = {
+		.variant = IMX8MQ,
+		.gpr = "fsl,imx8mq-iomuxc-gpr",
+	},
+	[IMX8MM] = {
+		.variant = IMX8MM,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.gpr = "fsl,imx8mm-iomuxc-gpr",
+	},
+	[IMX8MP] = {
+		.variant = IMX8MP,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.gpr = "fsl,imx8mp-iomuxc-gpr",
+	},
+	[IMX8MQ_EP] = {
+		.variant = IMX8MQ_EP,
+		.mode = DW_PCIE_EP_TYPE,
+		.gpr = "fsl,imx8mq-iomuxc-gpr",
+	},
+	[IMX8MM_EP] = {
+		.variant = IMX8MM_EP,
+		.mode = DW_PCIE_EP_TYPE,
+		.gpr = "fsl,imx8mm-iomuxc-gpr",
+	},
+	[IMX8MP_EP] = {
+		.variant = IMX8MP_EP,
+		.mode = DW_PCIE_EP_TYPE,
+		.gpr = "fsl,imx8mp-iomuxc-gpr",
+	},
+};
+
+static const struct of_device_id imx6_pcie_of_match[] = {
+	{ .compatible = "fsl,imx6q-pcie",  .data = &drvdata[IMX6Q],  },
+	{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
+	{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
+	{ .compatible = "fsl,imx7d-pcie",  .data = &drvdata[IMX7D],  },
+	{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
+	{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
+	{ .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
+	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
+	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
+	{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+	{},
+};
+
+static struct platform_driver imx6_pcie_driver = {
+	.driver = {
+		.name	= "imx6q-pcie",
+		.of_match_table = imx6_pcie_of_match,
+		.suppress_bind_attrs = true,
+		.pm = &imx6_pcie_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe    = imx6_pcie_probe,
+	.shutdown = imx6_pcie_shutdown,
+};
+
+static void imx6_pcie_quirk(struct pci_dev *dev)
+{
+	struct pci_bus *bus = dev->bus;
+	struct dw_pcie_rp *pp = bus->sysdata;
+
+	/* Bus parent is the PCI bridge, its parent is this platform driver */
+	if (!bus->dev.parent || !bus->dev.parent->parent)
+		return;
+
+	/* Make sure we only quirk devices associated with this driver */
+	if (bus->dev.parent->parent->driver != &imx6_pcie_driver.driver)
+		return;
+
+	if (pci_is_root_bus(bus)) {
+		struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+		struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+
+		/*
+		 * Limit config length to avoid the kernel reading beyond
+		 * the register set and causing an abort on i.MX 6Quad
+		 */
+		if (imx6_pcie->drvdata->dbi_length) {
+			dev->cfg_size = imx6_pcie->drvdata->dbi_length;
+			dev_info(&dev->dev, "Limiting cfg_size to %d\n",
+					dev->cfg_size);
+		}
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd,
+			PCI_CLASS_BRIDGE_PCI, 8, imx6_pcie_quirk);
+
+static int __init imx6_pcie_init(void)
+{
+#ifdef CONFIG_ARM
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, imx6_pcie_of_match);
+	if (!np)
+		return -ENODEV;
+	of_node_put(np);
+
+	/*
+	 * Since probe() can be deferred we need to make sure that
+	 * hook_fault_code is not called after __init memory is freed
+	 * by kernel and since imx6q_pcie_abort_handler() is a no-op,
+	 * we can install the handler here without risking it
+	 * accessing some uninitialized driver state.
+	 */
+	hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
+			"external abort on non-linefetch");
+#endif
+
+	return platform_driver_register(&imx6_pcie_driver);
+}
+device_initcall(imx6_pcie_init);