Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 550 insertions, 0 deletions

diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
new file mode 100644
index 0000000000..ffdeed25e9
--- /dev/null
+++ b/drivers/pci/controller/pci-ftpci100.c
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for Faraday Technology FTPC100 PCI Controller
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the out-of-tree OpenWRT patch for Cortina Gemini:
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Based on SL2312 PCI controller code
+ * Storlink (C) 2003
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+
+#include "../pci.h"
+
+/*
+ * Special configuration registers directly in the first few words
+ * in I/O space.
+ */
+#define FTPCI_IOSIZE	0x00
+#define FTPCI_PROT	0x04 /* AHB protection */
+#define FTPCI_CTRL	0x08 /* PCI control signal */
+#define FTPCI_SOFTRST	0x10 /* Soft reset counter and response error enable */
+#define FTPCI_CONFIG	0x28 /* PCI configuration command register */
+#define FTPCI_DATA	0x2C
+
+#define FARADAY_PCI_STATUS_CMD		0x04 /* Status and command */
+#define FARADAY_PCI_PMC			0x40 /* Power management control */
+#define FARADAY_PCI_PMCSR		0x44 /* Power management status */
+#define FARADAY_PCI_CTRL1		0x48 /* Control register 1 */
+#define FARADAY_PCI_CTRL2		0x4C /* Control register 2 */
+#define FARADAY_PCI_MEM1_BASE_SIZE	0x50 /* Memory base and size #1 */
+#define FARADAY_PCI_MEM2_BASE_SIZE	0x54 /* Memory base and size #2 */
+#define FARADAY_PCI_MEM3_BASE_SIZE	0x58 /* Memory base and size #3 */
+
+#define PCI_STATUS_66MHZ_CAPABLE	BIT(21)
+
+/* Bits 31..28 gives INTD..INTA status */
+#define PCI_CTRL2_INTSTS_SHIFT		28
+#define PCI_CTRL2_INTMASK_CMDERR	BIT(27)
+#define PCI_CTRL2_INTMASK_PARERR	BIT(26)
+/* Bits 25..22 masks INTD..INTA */
+#define PCI_CTRL2_INTMASK_SHIFT		22
+#define PCI_CTRL2_INTMASK_MABRT_RX	BIT(21)
+#define PCI_CTRL2_INTMASK_TABRT_RX	BIT(20)
+#define PCI_CTRL2_INTMASK_TABRT_TX	BIT(19)
+#define PCI_CTRL2_INTMASK_RETRY4	BIT(18)
+#define PCI_CTRL2_INTMASK_SERR_RX	BIT(17)
+#define PCI_CTRL2_INTMASK_PERR_RX	BIT(16)
+/* Bit 15 reserved */
+#define PCI_CTRL2_MSTPRI_REQ6		BIT(14)
+#define PCI_CTRL2_MSTPRI_REQ5		BIT(13)
+#define PCI_CTRL2_MSTPRI_REQ4		BIT(12)
+#define PCI_CTRL2_MSTPRI_REQ3		BIT(11)
+#define PCI_CTRL2_MSTPRI_REQ2		BIT(10)
+#define PCI_CTRL2_MSTPRI_REQ1		BIT(9)
+#define PCI_CTRL2_MSTPRI_REQ0		BIT(8)
+/* Bits 7..4 reserved */
+/* Bits 3..0 TRDYW */
+
+/*
+ * Memory configs:
+ * Bit 31..20 defines the PCI side memory base
+ * Bit 19..16 (4 bits) defines the size per below
+ */
+#define FARADAY_PCI_MEMBASE_MASK	0xfff00000
+#define FARADAY_PCI_MEMSIZE_1MB		0x0
+#define FARADAY_PCI_MEMSIZE_2MB		0x1
+#define FARADAY_PCI_MEMSIZE_4MB		0x2
+#define FARADAY_PCI_MEMSIZE_8MB		0x3
+#define FARADAY_PCI_MEMSIZE_16MB	0x4
+#define FARADAY_PCI_MEMSIZE_32MB	0x5
+#define FARADAY_PCI_MEMSIZE_64MB	0x6
+#define FARADAY_PCI_MEMSIZE_128MB	0x7
+#define FARADAY_PCI_MEMSIZE_256MB	0x8
+#define FARADAY_PCI_MEMSIZE_512MB	0x9
+#define FARADAY_PCI_MEMSIZE_1GB		0xa
+#define FARADAY_PCI_MEMSIZE_2GB		0xb
+#define FARADAY_PCI_MEMSIZE_SHIFT	16
+
+/*
+ * The DMA base is set to 0x0 for all memory segments, it reflects the
+ * fact that the memory of the host system starts at 0x0.
+ */
+#define FARADAY_PCI_DMA_MEM1_BASE	0x00000000
+#define FARADAY_PCI_DMA_MEM2_BASE	0x00000000
+#define FARADAY_PCI_DMA_MEM3_BASE	0x00000000
+
+/**
+ * struct faraday_pci_variant - encodes IP block differences
+ * @cascaded_irq: this host has cascaded IRQs from an interrupt controller
+ *	embedded in the host bridge.
+ */
+struct faraday_pci_variant {
+	bool cascaded_irq;
+};
+
+struct faraday_pci {
+	struct device *dev;
+	void __iomem *base;
+	struct irq_domain *irqdomain;
+	struct pci_bus *bus;
+	struct clk *bus_clk;
+};
+
+static int faraday_res_to_memcfg(resource_size_t mem_base,
+				 resource_size_t mem_size, u32 *val)
+{
+	u32 outval;
+
+	switch (mem_size) {
+	case SZ_1M:
+		outval = FARADAY_PCI_MEMSIZE_1MB;
+		break;
+	case SZ_2M:
+		outval = FARADAY_PCI_MEMSIZE_2MB;
+		break;
+	case SZ_4M:
+		outval = FARADAY_PCI_MEMSIZE_4MB;
+		break;
+	case SZ_8M:
+		outval = FARADAY_PCI_MEMSIZE_8MB;
+		break;
+	case SZ_16M:
+		outval = FARADAY_PCI_MEMSIZE_16MB;
+		break;
+	case SZ_32M:
+		outval = FARADAY_PCI_MEMSIZE_32MB;
+		break;
+	case SZ_64M:
+		outval = FARADAY_PCI_MEMSIZE_64MB;
+		break;
+	case SZ_128M:
+		outval = FARADAY_PCI_MEMSIZE_128MB;
+		break;
+	case SZ_256M:
+		outval = FARADAY_PCI_MEMSIZE_256MB;
+		break;
+	case SZ_512M:
+		outval = FARADAY_PCI_MEMSIZE_512MB;
+		break;
+	case SZ_1G:
+		outval = FARADAY_PCI_MEMSIZE_1GB;
+		break;
+	case SZ_2G:
+		outval = FARADAY_PCI_MEMSIZE_2GB;
+		break;
+	default:
+		return -EINVAL;
+	}
+	outval <<= FARADAY_PCI_MEMSIZE_SHIFT;
+
+	/* This is probably not good */
+	if (mem_base & ~(FARADAY_PCI_MEMBASE_MASK))
+		pr_warn("truncated PCI memory base\n");
+	/* Translate to bridge side address space */
+	outval |= (mem_base & FARADAY_PCI_MEMBASE_MASK);
+	pr_debug("Translated pci base @%pap, size %pap to config %08x\n",
+		 &mem_base, &mem_size, outval);
+
+	*val = outval;
+	return 0;
+}
+
+static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
+				       unsigned int fn, int config, int size,
+				       u32 *value)
+{
+	writel(PCI_CONF1_ADDRESS(bus_number, PCI_SLOT(fn),
+				 PCI_FUNC(fn), config),
+			p->base + FTPCI_CONFIG);
+
+	*value = readl(p->base + FTPCI_DATA);
+
+	if (size == 1)
+		*value = (*value >> (8 * (config & 3))) & 0xFF;
+	else if (size == 2)
+		*value = (*value >> (8 * (config & 3))) & 0xFFFF;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
+				   int config, int size, u32 *value)
+{
+	struct faraday_pci *p = bus->sysdata;
+
+	dev_dbg(&bus->dev,
+		"[read]  slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+		PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
+
+	return faraday_raw_pci_read_config(p, bus->number, fn, config, size, value);
+}
+
+static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
+					 unsigned int fn, int config, int size,
+					 u32 value)
+{
+	int ret = PCIBIOS_SUCCESSFUL;
+
+	writel(PCI_CONF1_ADDRESS(bus_number, PCI_SLOT(fn),
+				 PCI_FUNC(fn), config),
+			p->base + FTPCI_CONFIG);
+
+	switch (size) {
+	case 4:
+		writel(value, p->base + FTPCI_DATA);
+		break;
+	case 2:
+		writew(value, p->base + FTPCI_DATA + (config & 3));
+		break;
+	case 1:
+		writeb(value, p->base + FTPCI_DATA + (config & 3));
+		break;
+	default:
+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	return ret;
+}
+
+static int faraday_pci_write_config(struct pci_bus *bus, unsigned int fn,
+				    int config, int size, u32 value)
+{
+	struct faraday_pci *p = bus->sysdata;
+
+	dev_dbg(&bus->dev,
+		"[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+		PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
+
+	return faraday_raw_pci_write_config(p, bus->number, fn, config, size,
+					    value);
+}
+
+static struct pci_ops faraday_pci_ops = {
+	.read	= faraday_pci_read_config,
+	.write	= faraday_pci_write_config,
+};
+
+static void faraday_pci_ack_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
+	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_mask_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
+		 | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
+	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_unmask_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
+	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_irq_handler(struct irq_desc *desc)
+{
+	struct faraday_pci *p = irq_desc_get_handler_data(desc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	unsigned int irq_stat, reg, i;
+
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
+
+	chained_irq_enter(irqchip, desc);
+
+	for (i = 0; i < 4; i++) {
+		if ((irq_stat & BIT(i)) == 0)
+			continue;
+		generic_handle_domain_irq(p->irqdomain, i);
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip faraday_pci_irq_chip = {
+	.name = "PCI",
+	.irq_ack = faraday_pci_ack_irq,
+	.irq_mask = faraday_pci_mask_irq,
+	.irq_unmask = faraday_pci_unmask_irq,
+};
+
+static int faraday_pci_irq_map(struct irq_domain *domain, unsigned int irq,
+			       irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &faraday_pci_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops faraday_pci_irqdomain_ops = {
+	.map = faraday_pci_irq_map,
+};
+
+static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p)
+{
+	struct device_node *intc = of_get_next_child(p->dev->of_node, NULL);
+	int irq;
+	int i;
+
+	if (!intc) {
+		dev_err(p->dev, "missing child interrupt-controller node\n");
+		return -EINVAL;
+	}
+
+	/* All PCI IRQs cascade off this one */
+	irq = of_irq_get(intc, 0);
+	if (irq <= 0) {
+		dev_err(p->dev, "failed to get parent IRQ\n");
+		of_node_put(intc);
+		return irq ?: -EINVAL;
+	}
+
+	p->irqdomain = irq_domain_add_linear(intc, PCI_NUM_INTX,
+					     &faraday_pci_irqdomain_ops, p);
+	of_node_put(intc);
+	if (!p->irqdomain) {
+		dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
+		return -EINVAL;
+	}
+
+	irq_set_chained_handler_and_data(irq, faraday_pci_irq_handler, p);
+
+	for (i = 0; i < 4; i++)
+		irq_create_mapping(p->irqdomain, i);
+
+	return 0;
+}
+
+static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p)
+{
+	struct device *dev = p->dev;
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(p);
+	struct resource_entry *entry;
+	u32 confreg[3] = {
+		FARADAY_PCI_MEM1_BASE_SIZE,
+		FARADAY_PCI_MEM2_BASE_SIZE,
+		FARADAY_PCI_MEM3_BASE_SIZE,
+	};
+	int i = 0;
+	u32 val;
+
+	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
+		u64 pci_addr = entry->res->start - entry->offset;
+		u64 end = entry->res->end - entry->offset;
+		int ret;
+
+		ret = faraday_res_to_memcfg(pci_addr,
+					    resource_size(entry->res), &val);
+		if (ret) {
+			dev_err(dev,
+				"DMA range %d: illegal MEM resource size\n", i);
+			return -EINVAL;
+		}
+
+		dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
+			 i + 1, pci_addr, end, val);
+		if (i <= 2) {
+			faraday_raw_pci_write_config(p, 0, 0, confreg[i],
+						     4, val);
+		} else {
+			dev_err(dev, "ignore extraneous dma-range %d\n", i);
+			break;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int faraday_pci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct faraday_pci_variant *variant =
+		of_device_get_match_data(dev);
+	struct resource_entry *win;
+	struct faraday_pci *p;
+	struct resource *io;
+	struct pci_host_bridge *host;
+	struct clk *clk;
+	unsigned char max_bus_speed = PCI_SPEED_33MHz;
+	unsigned char cur_bus_speed = PCI_SPEED_33MHz;
+	int ret;
+	u32 val;
+
+	host = devm_pci_alloc_host_bridge(dev, sizeof(*p));
+	if (!host)
+		return -ENOMEM;
+
+	host->ops = &faraday_pci_ops;
+	p = pci_host_bridge_priv(host);
+	host->sysdata = p;
+	p->dev = dev;
+
+	/* Retrieve and enable optional clocks */
+	clk = devm_clk_get_enabled(dev, "PCLK");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	p->bus_clk = devm_clk_get_enabled(dev, "PCICLK");
+	if (IS_ERR(p->bus_clk))
+		return PTR_ERR(p->bus_clk);
+
+	p->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(p->base))
+		return PTR_ERR(p->base);
+
+	win = resource_list_first_type(&host->windows, IORESOURCE_IO);
+	if (win) {
+		io = win->res;
+		if (!faraday_res_to_memcfg(io->start - win->offset,
+					   resource_size(io), &val)) {
+			/* setup I/O space size */
+			writel(val, p->base + FTPCI_IOSIZE);
+		} else {
+			dev_err(dev, "illegal IO mem size\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Setup hostbridge */
+	val = readl(p->base + FTPCI_CTRL);
+	val |= PCI_COMMAND_IO;
+	val |= PCI_COMMAND_MEMORY;
+	val |= PCI_COMMAND_MASTER;
+	writel(val, p->base + FTPCI_CTRL);
+	/* Mask and clear all interrupts */
+	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
+	if (variant->cascaded_irq) {
+		ret = faraday_pci_setup_cascaded_irq(p);
+		if (ret) {
+			dev_err(dev, "failed to setup cascaded IRQ\n");
+			return ret;
+		}
+	}
+
+	/* Check bus clock if we can gear up to 66 MHz */
+	if (!IS_ERR(p->bus_clk)) {
+		unsigned long rate;
+		u32 val;
+
+		faraday_raw_pci_read_config(p, 0, 0,
+					    FARADAY_PCI_STATUS_CMD, 4, &val);
+		rate = clk_get_rate(p->bus_clk);
+
+		if ((rate == 33000000) && (val & PCI_STATUS_66MHZ_CAPABLE)) {
+			dev_info(dev, "33MHz bus is 66MHz capable\n");
+			max_bus_speed = PCI_SPEED_66MHz;
+			ret = clk_set_rate(p->bus_clk, 66000000);
+			if (ret)
+				dev_err(dev, "failed to set bus clock\n");
+		} else {
+			dev_info(dev, "33MHz only bus\n");
+			max_bus_speed = PCI_SPEED_33MHz;
+		}
+
+		/* Bumping the clock may fail so read back the rate */
+		rate = clk_get_rate(p->bus_clk);
+		if (rate == 33000000)
+			cur_bus_speed = PCI_SPEED_33MHz;
+		if (rate == 66000000)
+			cur_bus_speed = PCI_SPEED_66MHz;
+	}
+
+	ret = faraday_pci_parse_map_dma_ranges(p);
+	if (ret)
+		return ret;
+
+	ret = pci_scan_root_bus_bridge(host);
+	if (ret) {
+		dev_err(dev, "failed to scan host: %d\n", ret);
+		return ret;
+	}
+	p->bus = host->bus;
+	p->bus->max_bus_speed = max_bus_speed;
+	p->bus->cur_bus_speed = cur_bus_speed;
+
+	pci_bus_assign_resources(p->bus);
+	pci_bus_add_devices(p->bus);
+
+	return 0;
+}
+
+/*
+ * We encode bridge variants here, we have at least two so it doesn't
+ * hurt to have infrastructure to encompass future variants as well.
+ */
+static const struct faraday_pci_variant faraday_regular = {
+	.cascaded_irq = true,
+};
+
+static const struct faraday_pci_variant faraday_dual = {
+	.cascaded_irq = false,
+};
+
+static const struct of_device_id faraday_pci_of_match[] = {
+	{
+		.compatible = "faraday,ftpci100",
+		.data = &faraday_regular,
+	},
+	{
+		.compatible = "faraday,ftpci100-dual",
+		.data = &faraday_dual,
+	},
+	{},
+};
+
+static struct platform_driver faraday_pci_driver = {
+	.driver = {
+		.name = "ftpci100",
+		.of_match_table = faraday_pci_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe  = faraday_pci_probe,
+};
+builtin_platform_driver(faraday_pci_driver);