Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 428 insertions, 0 deletions

diff --git a/drivers/pci/vc.c b/drivers/pci/vc.c
new file mode 100644
index 0000000000..5fc59ac311
--- /dev/null
+++ b/drivers/pci/vc.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Virtual Channel support
+ *
+ * Copyright (C) 2013 Red Hat, Inc.  All rights reserved.
+ *     Author: Alex Williamson <alex.williamson@redhat.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/types.h>
+
+#include "pci.h"
+
+/**
+ * pci_vc_save_restore_dwords - Save or restore a series of dwords
+ * @dev: device
+ * @pos: starting config space position
+ * @buf: buffer to save to or restore from
+ * @dwords: number of dwords to save/restore
+ * @save: whether to save or restore
+ */
+static void pci_vc_save_restore_dwords(struct pci_dev *dev, int pos,
+				       u32 *buf, int dwords, bool save)
+{
+	int i;
+
+	for (i = 0; i < dwords; i++, buf++) {
+		if (save)
+			pci_read_config_dword(dev, pos + (i * 4), buf);
+		else
+			pci_write_config_dword(dev, pos + (i * 4), *buf);
+	}
+}
+
+/**
+ * pci_vc_load_arb_table - load and wait for VC arbitration table
+ * @dev: device
+ * @pos: starting position of VC capability (VC/VC9/MFVC)
+ *
+ * Set Load VC Arbitration Table bit requesting hardware to apply the VC
+ * Arbitration Table (previously loaded).  When the VC Arbitration Table
+ * Status clears, hardware has latched the table into VC arbitration logic.
+ */
+static void pci_vc_load_arb_table(struct pci_dev *dev, int pos)
+{
+	u16 ctrl;
+
+	pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL, &ctrl);
+	pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
+			      ctrl | PCI_VC_PORT_CTRL_LOAD_TABLE);
+	if (pci_wait_for_pending(dev, pos + PCI_VC_PORT_STATUS,
+				 PCI_VC_PORT_STATUS_TABLE))
+		return;
+
+	pci_err(dev, "VC arbitration table failed to load\n");
+}
+
+/**
+ * pci_vc_load_port_arb_table - Load and wait for VC port arbitration table
+ * @dev: device
+ * @pos: starting position of VC capability (VC/VC9/MFVC)
+ * @res: VC resource number, ie. VCn (0-7)
+ *
+ * Set Load Port Arbitration Table bit requesting hardware to apply the Port
+ * Arbitration Table (previously loaded).  When the Port Arbitration Table
+ * Status clears, hardware has latched the table into port arbitration logic.
+ */
+static void pci_vc_load_port_arb_table(struct pci_dev *dev, int pos, int res)
+{
+	int ctrl_pos, status_pos;
+	u32 ctrl;
+
+	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
+	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
+
+	pci_read_config_dword(dev, ctrl_pos, &ctrl);
+	pci_write_config_dword(dev, ctrl_pos,
+			       ctrl | PCI_VC_RES_CTRL_LOAD_TABLE);
+
+	if (pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_TABLE))
+		return;
+
+	pci_err(dev, "VC%d port arbitration table failed to load\n", res);
+}
+
+/**
+ * pci_vc_enable - Enable virtual channel
+ * @dev: device
+ * @pos: starting position of VC capability (VC/VC9/MFVC)
+ * @res: VC res number, ie. VCn (0-7)
+ *
+ * A VC is enabled by setting the enable bit in matching resource control
+ * registers on both sides of a link.  We therefore need to find the opposite
+ * end of the link.  To keep this simple we enable from the downstream device.
+ * RC devices do not have an upstream device, nor does it seem that VC9 do
+ * (spec is unclear).  Once we find the upstream device, match the VC ID to
+ * get the correct resource, disable and enable on both ends.
+ */
+static void pci_vc_enable(struct pci_dev *dev, int pos, int res)
+{
+	int ctrl_pos, status_pos, id, pos2, evcc, i, ctrl_pos2, status_pos2;
+	u32 ctrl, header, cap1, ctrl2;
+	struct pci_dev *link = NULL;
+
+	/* Enable VCs from the downstream device */
+	if (!pci_is_pcie(dev) || !pcie_downstream_port(dev))
+		return;
+
+	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
+	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
+
+	pci_read_config_dword(dev, ctrl_pos, &ctrl);
+	id = ctrl & PCI_VC_RES_CTRL_ID;
+
+	pci_read_config_dword(dev, pos, &header);
+
+	/* If there is no opposite end of the link, skip to enable */
+	if (PCI_EXT_CAP_ID(header) == PCI_EXT_CAP_ID_VC9 ||
+	    pci_is_root_bus(dev->bus))
+		goto enable;
+
+	pos2 = pci_find_ext_capability(dev->bus->self, PCI_EXT_CAP_ID_VC);
+	if (!pos2)
+		goto enable;
+
+	pci_read_config_dword(dev->bus->self, pos2 + PCI_VC_PORT_CAP1, &cap1);
+	evcc = cap1 & PCI_VC_CAP1_EVCC;
+
+	/* VC0 is hardwired enabled, so we can start with 1 */
+	for (i = 1; i < evcc + 1; i++) {
+		ctrl_pos2 = pos2 + PCI_VC_RES_CTRL +
+				(i * PCI_CAP_VC_PER_VC_SIZEOF);
+		status_pos2 = pos2 + PCI_VC_RES_STATUS +
+				(i * PCI_CAP_VC_PER_VC_SIZEOF);
+		pci_read_config_dword(dev->bus->self, ctrl_pos2, &ctrl2);
+		if ((ctrl2 & PCI_VC_RES_CTRL_ID) == id) {
+			link = dev->bus->self;
+			break;
+		}
+	}
+
+	if (!link)
+		goto enable;
+
+	/* Disable if enabled */
+	if (ctrl2 & PCI_VC_RES_CTRL_ENABLE) {
+		ctrl2 &= ~PCI_VC_RES_CTRL_ENABLE;
+		pci_write_config_dword(link, ctrl_pos2, ctrl2);
+	}
+
+	/* Enable on both ends */
+	ctrl2 |= PCI_VC_RES_CTRL_ENABLE;
+	pci_write_config_dword(link, ctrl_pos2, ctrl2);
+enable:
+	ctrl |= PCI_VC_RES_CTRL_ENABLE;
+	pci_write_config_dword(dev, ctrl_pos, ctrl);
+
+	if (!pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_NEGO))
+		pci_err(dev, "VC%d negotiation stuck pending\n", id);
+
+	if (link && !pci_wait_for_pending(link, status_pos2,
+					  PCI_VC_RES_STATUS_NEGO))
+		pci_err(link, "VC%d negotiation stuck pending\n", id);
+}
+
+/**
+ * pci_vc_do_save_buffer - Size, save, or restore VC state
+ * @dev: device
+ * @pos: starting position of VC capability (VC/VC9/MFVC)
+ * @save_state: buffer for save/restore
+ * @save: if provided a buffer, this indicates what to do with it
+ *
+ * Walking Virtual Channel config space to size, save, or restore it
+ * is complicated, so we do it all from one function to reduce code and
+ * guarantee ordering matches in the buffer.  When called with NULL
+ * @save_state, return the size of the necessary save buffer.  When called
+ * with a non-NULL @save_state, @save determines whether we save to the
+ * buffer or restore from it.
+ */
+static int pci_vc_do_save_buffer(struct pci_dev *dev, int pos,
+				 struct pci_cap_saved_state *save_state,
+				 bool save)
+{
+	u32 cap1;
+	char evcc, lpevcc, parb_size;
+	int i, len = 0;
+	u8 *buf = save_state ? (u8 *)save_state->cap.data : NULL;
+
+	/* Sanity check buffer size for save/restore */
+	if (buf && save_state->cap.size !=
+	    pci_vc_do_save_buffer(dev, pos, NULL, save)) {
+		pci_err(dev, "VC save buffer size does not match @0x%x\n", pos);
+		return -ENOMEM;
+	}
+
+	pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP1, &cap1);
+	/* Extended VC Count (not counting VC0) */
+	evcc = cap1 & PCI_VC_CAP1_EVCC;
+	/* Low Priority Extended VC Count (not counting VC0) */
+	lpevcc = (cap1 & PCI_VC_CAP1_LPEVCC) >> 4;
+	/* Port Arbitration Table Entry Size (bits) */
+	parb_size = 1 << ((cap1 & PCI_VC_CAP1_ARB_SIZE) >> 10);
+
+	/*
+	 * Port VC Control Register contains VC Arbitration Select, which
+	 * cannot be modified when more than one LPVC is in operation.  We
+	 * therefore save/restore it first, as only VC0 should be enabled
+	 * after device reset.
+	 */
+	if (buf) {
+		if (save)
+			pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL,
+					     (u16 *)buf);
+		else
+			pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
+					      *(u16 *)buf);
+		buf += 4;
+	}
+	len += 4;
+
+	/*
+	 * If we have any Low Priority VCs and a VC Arbitration Table Offset
+	 * in Port VC Capability Register 2 then save/restore it next.
+	 */
+	if (lpevcc) {
+		u32 cap2;
+		int vcarb_offset;
+
+		pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP2, &cap2);
+		vcarb_offset = ((cap2 & PCI_VC_CAP2_ARB_OFF) >> 24) * 16;
+
+		if (vcarb_offset) {
+			int size, vcarb_phases = 0;
+
+			if (cap2 & PCI_VC_CAP2_128_PHASE)
+				vcarb_phases = 128;
+			else if (cap2 & PCI_VC_CAP2_64_PHASE)
+				vcarb_phases = 64;
+			else if (cap2 & PCI_VC_CAP2_32_PHASE)
+				vcarb_phases = 32;
+
+			/* Fixed 4 bits per phase per lpevcc (plus VC0) */
+			size = ((lpevcc + 1) * vcarb_phases * 4) / 8;
+
+			if (size && buf) {
+				pci_vc_save_restore_dwords(dev,
+							   pos + vcarb_offset,
+							   (u32 *)buf,
+							   size / 4, save);
+				/*
+				 * On restore, we need to signal hardware to
+				 * re-load the VC Arbitration Table.
+				 */
+				if (!save)
+					pci_vc_load_arb_table(dev, pos);
+
+				buf += size;
+			}
+			len += size;
+		}
+	}
+
+	/*
+	 * In addition to each VC Resource Control Register, we may have a
+	 * Port Arbitration Table attached to each VC.  The Port Arbitration
+	 * Table Offset in each VC Resource Capability Register tells us if
+	 * it exists.  The entry size is global from the Port VC Capability
+	 * Register1 above.  The number of phases is determined per VC.
+	 */
+	for (i = 0; i < evcc + 1; i++) {
+		u32 cap;
+		int parb_offset;
+
+		pci_read_config_dword(dev, pos + PCI_VC_RES_CAP +
+				      (i * PCI_CAP_VC_PER_VC_SIZEOF), &cap);
+		parb_offset = ((cap & PCI_VC_RES_CAP_ARB_OFF) >> 24) * 16;
+		if (parb_offset) {
+			int size, parb_phases = 0;
+
+			if (cap & PCI_VC_RES_CAP_256_PHASE)
+				parb_phases = 256;
+			else if (cap & (PCI_VC_RES_CAP_128_PHASE |
+					PCI_VC_RES_CAP_128_PHASE_TB))
+				parb_phases = 128;
+			else if (cap & PCI_VC_RES_CAP_64_PHASE)
+				parb_phases = 64;
+			else if (cap & PCI_VC_RES_CAP_32_PHASE)
+				parb_phases = 32;
+
+			size = (parb_size * parb_phases) / 8;
+
+			if (size && buf) {
+				pci_vc_save_restore_dwords(dev,
+							   pos + parb_offset,
+							   (u32 *)buf,
+							   size / 4, save);
+				buf += size;
+			}
+			len += size;
+		}
+
+		/* VC Resource Control Register */
+		if (buf) {
+			int ctrl_pos = pos + PCI_VC_RES_CTRL +
+						(i * PCI_CAP_VC_PER_VC_SIZEOF);
+			if (save)
+				pci_read_config_dword(dev, ctrl_pos,
+						      (u32 *)buf);
+			else {
+				u32 tmp, ctrl = *(u32 *)buf;
+				/*
+				 * For an FLR case, the VC config may remain.
+				 * Preserve enable bit, restore the rest.
+				 */
+				pci_read_config_dword(dev, ctrl_pos, &tmp);
+				tmp &= PCI_VC_RES_CTRL_ENABLE;
+				tmp |= ctrl & ~PCI_VC_RES_CTRL_ENABLE;
+				pci_write_config_dword(dev, ctrl_pos, tmp);
+				/* Load port arbitration table if used */
+				if (ctrl & PCI_VC_RES_CTRL_ARB_SELECT)
+					pci_vc_load_port_arb_table(dev, pos, i);
+				/* Re-enable if needed */
+				if ((ctrl ^ tmp) & PCI_VC_RES_CTRL_ENABLE)
+					pci_vc_enable(dev, pos, i);
+			}
+			buf += 4;
+		}
+		len += 4;
+	}
+
+	return buf ? 0 : len;
+}
+
+static struct {
+	u16 id;
+	const char *name;
+} vc_caps[] = { { PCI_EXT_CAP_ID_MFVC, "MFVC" },
+		{ PCI_EXT_CAP_ID_VC, "VC" },
+		{ PCI_EXT_CAP_ID_VC9, "VC9" } };
+
+/**
+ * pci_save_vc_state - Save VC state to pre-allocate save buffer
+ * @dev: device
+ *
+ * For each type of VC capability, VC/VC9/MFVC, find the capability and
+ * save it to the pre-allocated save buffer.
+ */
+int pci_save_vc_state(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
+		int pos, ret;
+		struct pci_cap_saved_state *save_state;
+
+		pos = pci_find_ext_capability(dev, vc_caps[i].id);
+		if (!pos)
+			continue;
+
+		save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
+		if (!save_state) {
+			pci_err(dev, "%s buffer not found in %s\n",
+				vc_caps[i].name, __func__);
+			return -ENOMEM;
+		}
+
+		ret = pci_vc_do_save_buffer(dev, pos, save_state, true);
+		if (ret) {
+			pci_err(dev, "%s save unsuccessful %s\n",
+				vc_caps[i].name, __func__);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * pci_restore_vc_state - Restore VC state from save buffer
+ * @dev: device
+ *
+ * For each type of VC capability, VC/VC9/MFVC, find the capability and
+ * restore it from the previously saved buffer.
+ */
+void pci_restore_vc_state(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
+		int pos;
+		struct pci_cap_saved_state *save_state;
+
+		pos = pci_find_ext_capability(dev, vc_caps[i].id);
+		save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
+		if (!save_state || !pos)
+			continue;
+
+		pci_vc_do_save_buffer(dev, pos, save_state, false);
+	}
+}
+
+/**
+ * pci_allocate_vc_save_buffers - Allocate save buffers for VC caps
+ * @dev: device
+ *
+ * For each type of VC capability, VC/VC9/MFVC, find the capability, size
+ * it, and allocate a buffer for save/restore.
+ */
+void pci_allocate_vc_save_buffers(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
+		int len, pos = pci_find_ext_capability(dev, vc_caps[i].id);
+
+		if (!pos)
+			continue;
+
+		len = pci_vc_do_save_buffer(dev, pos, NULL, false);
+		if (pci_add_ext_cap_save_buffer(dev, vc_caps[i].id, len))
+			pci_err(dev, "unable to preallocate %s save buffer\n",
+				vc_caps[i].name);
+	}
+}