Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1673 insertions, 0 deletions

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
new file mode 100644
index 0000000000..05eab90141
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -0,0 +1,1673 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "phy-mtk-io.h"
+
+/* version V1 sub-banks offset base address */
+/* banks shared by multiple phys */
+#define SSUSB_SIFSLV_V1_SPLLC		0x000	/* shared by u3 phys */
+#define SSUSB_SIFSLV_V1_U2FREQ		0x100	/* shared by u2 phys */
+#define SSUSB_SIFSLV_V1_CHIP		0x300	/* shared by u3 phys */
+/* u2 phy bank */
+#define SSUSB_SIFSLV_V1_U2PHY_COM	0x000
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V1_U3PHYD		0x000
+#define SSUSB_SIFSLV_V1_U3PHYA		0x200
+
+/* version V2/V3 sub-banks offset base address */
+/* V3: U2FREQ is not used anymore, but reserved */
+/* u2 phy banks */
+#define SSUSB_SIFSLV_V2_MISC		0x000
+#define SSUSB_SIFSLV_V2_U2FREQ		0x100
+#define SSUSB_SIFSLV_V2_U2PHY_COM	0x300
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V2_SPLLC		0x000
+#define SSUSB_SIFSLV_V2_CHIP		0x100
+#define SSUSB_SIFSLV_V2_U3PHYD		0x200
+#define SSUSB_SIFSLV_V2_U3PHYA		0x400
+
+#define U3P_MISC_REG1		0x04
+#define MR1_EFUSE_AUTO_LOAD_DIS		BIT(6)
+
+#define U3P_USBPHYACR0		0x000
+#define PA0_RG_U2PLL_FORCE_ON		BIT(15)
+#define PA0_USB20_PLL_PREDIV		GENMASK(7, 6)
+#define PA0_RG_USB20_INTR_EN		BIT(5)
+
+#define U3P_USBPHYACR1		0x004
+#define PA1_RG_INTR_CAL		GENMASK(23, 19)
+#define PA1_RG_VRT_SEL			GENMASK(14, 12)
+#define PA1_RG_TERM_SEL		GENMASK(10, 8)
+
+#define U3P_USBPHYACR2		0x008
+#define PA2_RG_U2PLL_BW			GENMASK(21, 19)
+#define PA2_RG_SIF_U2PLL_FORCE_EN	BIT(18)
+
+#define U3P_USBPHYACR5		0x014
+#define PA5_RG_U2_HSTX_SRCAL_EN	BIT(15)
+#define PA5_RG_U2_HSTX_SRCTRL		GENMASK(14, 12)
+#define PA5_RG_U2_HS_100U_U3_EN	BIT(11)
+
+#define U3P_USBPHYACR6		0x018
+#define PA6_RG_U2_PRE_EMP		GENMASK(31, 30)
+#define PA6_RG_U2_BC11_SW_EN		BIT(23)
+#define PA6_RG_U2_OTG_VBUSCMP_EN	BIT(20)
+#define PA6_RG_U2_DISCTH		GENMASK(7, 4)
+#define PA6_RG_U2_SQTH		GENMASK(3, 0)
+
+#define U3P_U2PHYACR4		0x020
+#define P2C_RG_USB20_GPIO_CTL		BIT(9)
+#define P2C_USB20_GPIO_MODE		BIT(8)
+#define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
+
+#define U3P_U2PHYA_RESV		0x030
+#define P2R_RG_U2PLL_FBDIV_26M		0x1bb13b
+#define P2R_RG_U2PLL_FBDIV_48M		0x3c0000
+
+#define U3P_U2PHYA_RESV1	0x044
+#define P2R_RG_U2PLL_REFCLK_SEL	BIT(5)
+#define P2R_RG_U2PLL_FRA_EN		BIT(3)
+
+#define U3D_U2PHYDCR0		0x060
+#define P2C_RG_SIF_U2PLL_FORCE_ON	BIT(24)
+
+#define U3P_U2PHYDTM0		0x068
+#define P2C_FORCE_UART_EN		BIT(26)
+#define P2C_FORCE_DATAIN		BIT(23)
+#define P2C_FORCE_DM_PULLDOWN		BIT(21)
+#define P2C_FORCE_DP_PULLDOWN		BIT(20)
+#define P2C_FORCE_XCVRSEL		BIT(19)
+#define P2C_FORCE_SUSPENDM		BIT(18)
+#define P2C_FORCE_TERMSEL		BIT(17)
+#define P2C_RG_DATAIN			GENMASK(13, 10)
+#define P2C_RG_DMPULLDOWN		BIT(7)
+#define P2C_RG_DPPULLDOWN		BIT(6)
+#define P2C_RG_XCVRSEL			GENMASK(5, 4)
+#define P2C_RG_SUSPENDM			BIT(3)
+#define P2C_RG_TERMSEL			BIT(2)
+#define P2C_DTM0_PART_MASK \
+		(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
+		P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
+		P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
+		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
+
+#define U3P_U2PHYDTM1		0x06C
+#define P2C_RG_UART_EN			BIT(16)
+#define P2C_FORCE_IDDIG		BIT(9)
+#define P2C_RG_VBUSVALID		BIT(5)
+#define P2C_RG_SESSEND			BIT(4)
+#define P2C_RG_AVALID			BIT(2)
+#define P2C_RG_IDDIG			BIT(1)
+
+#define U3P_U2PHYBC12C		0x080
+#define P2C_RG_CHGDT_EN		BIT(0)
+
+#define U3P_U3_CHIP_GPIO_CTLD		0x0c
+#define P3C_REG_IP_SW_RST		BIT(31)
+#define P3C_MCU_BUS_CK_GATE_EN		BIT(30)
+#define P3C_FORCE_IP_SW_RST		BIT(29)
+
+#define U3P_U3_CHIP_GPIO_CTLE		0x10
+#define P3C_RG_SWRST_U3_PHYD		BIT(25)
+#define P3C_RG_SWRST_U3_PHYD_FORCE_EN	BIT(24)
+
+#define U3P_U3_PHYA_REG0	0x000
+#define P3A_RG_IEXT_INTR		GENMASK(15, 10)
+#define P3A_RG_CLKDRV_OFF		GENMASK(3, 2)
+
+#define U3P_U3_PHYA_REG1	0x004
+#define P3A_RG_CLKDRV_AMP		GENMASK(31, 29)
+
+#define U3P_U3_PHYA_REG6	0x018
+#define P3A_RG_TX_EIDLE_CM		GENMASK(31, 28)
+
+#define U3P_U3_PHYA_REG9	0x024
+#define P3A_RG_RX_DAC_MUX		GENMASK(5, 1)
+
+#define U3P_U3_PHYA_DA_REG0	0x100
+#define P3A_RG_XTAL_EXT_PE2H		GENMASK(17, 16)
+#define P3A_RG_XTAL_EXT_PE1H		GENMASK(13, 12)
+#define P3A_RG_XTAL_EXT_EN_U3		GENMASK(11, 10)
+
+#define U3P_U3_PHYA_DA_REG4	0x108
+#define P3A_RG_PLL_DIVEN_PE2H		GENMASK(21, 19)
+#define P3A_RG_PLL_BC_PE2H		GENMASK(7, 6)
+
+#define U3P_U3_PHYA_DA_REG5	0x10c
+#define P3A_RG_PLL_BR_PE2H		GENMASK(29, 28)
+#define P3A_RG_PLL_IC_PE2H		GENMASK(15, 12)
+
+#define U3P_U3_PHYA_DA_REG6	0x110
+#define P3A_RG_PLL_IR_PE2H		GENMASK(19, 16)
+
+#define U3P_U3_PHYA_DA_REG7	0x114
+#define P3A_RG_PLL_BP_PE2H		GENMASK(19, 16)
+
+#define U3P_U3_PHYA_DA_REG20	0x13c
+#define P3A_RG_PLL_DELTA1_PE2H		GENMASK(31, 16)
+
+#define U3P_U3_PHYA_DA_REG25	0x148
+#define P3A_RG_PLL_DELTA_PE2H		GENMASK(15, 0)
+
+#define U3P_U3_PHYD_LFPS1		0x00c
+#define P3D_RG_FWAKE_TH		GENMASK(21, 16)
+
+#define U3P_U3_PHYD_IMPCAL0		0x010
+#define P3D_RG_FORCE_TX_IMPEL		BIT(31)
+#define P3D_RG_TX_IMPEL			GENMASK(28, 24)
+
+#define U3P_U3_PHYD_IMPCAL1		0x014
+#define P3D_RG_FORCE_RX_IMPEL		BIT(31)
+#define P3D_RG_RX_IMPEL			GENMASK(28, 24)
+
+#define U3P_U3_PHYD_RSV			0x054
+#define P3D_RG_EFUSE_AUTO_LOAD_DIS	BIT(12)
+
+#define U3P_U3_PHYD_CDR1		0x05c
+#define P3D_RG_CDR_BIR_LTD1		GENMASK(28, 24)
+#define P3D_RG_CDR_BIR_LTD0		GENMASK(12, 8)
+
+#define U3P_U3_PHYD_RXDET1		0x128
+#define P3D_RG_RXDET_STB2_SET		GENMASK(17, 9)
+
+#define U3P_U3_PHYD_RXDET2		0x12c
+#define P3D_RG_RXDET_STB2_SET_P3	GENMASK(8, 0)
+
+#define U3P_SPLLC_XTALCTL3		0x018
+#define XC3_RG_U3_XTAL_RX_PWD		BIT(9)
+#define XC3_RG_U3_FRC_XTAL_RX_PWD	BIT(8)
+
+#define U3P_U2FREQ_FMCR0	0x00
+#define P2F_RG_MONCLK_SEL	GENMASK(27, 26)
+#define P2F_RG_FREQDET_EN	BIT(24)
+#define P2F_RG_CYCLECNT		GENMASK(23, 0)
+
+#define U3P_U2FREQ_VALUE	0x0c
+
+#define U3P_U2FREQ_FMMONR1	0x10
+#define P2F_USB_FM_VALID	BIT(0)
+#define P2F_RG_FRCK_EN		BIT(8)
+
+#define U3P_REF_CLK		26	/* MHZ */
+#define U3P_SLEW_RATE_COEF	28
+#define U3P_SR_COEF_DIVISOR	1000
+#define U3P_FM_DET_CYCLE_CNT	1024
+
+/* SATA register setting */
+#define PHYD_CTRL_SIGNAL_MODE4		0x1c
+/* CDR Charge Pump P-path current adjustment */
+#define RG_CDR_BICLTD1_GEN1_MSK		GENMASK(23, 20)
+#define RG_CDR_BICLTD0_GEN1_MSK		GENMASK(11, 8)
+
+#define PHYD_DESIGN_OPTION2		0x24
+/* Symbol lock count selection */
+#define RG_LOCK_CNT_SEL_MSK		GENMASK(5, 4)
+
+#define PHYD_DESIGN_OPTION9	0x40
+/* COMWAK GAP width window */
+#define RG_TG_MAX_MSK		GENMASK(20, 16)
+/* COMINIT GAP width window */
+#define RG_T2_MAX_MSK		GENMASK(13, 8)
+/* COMWAK GAP width window */
+#define RG_TG_MIN_MSK		GENMASK(7, 5)
+/* COMINIT GAP width window */
+#define RG_T2_MIN_MSK		GENMASK(4, 0)
+
+#define ANA_RG_CTRL_SIGNAL1		0x4c
+/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
+#define RG_IDRV_0DB_GEN1_MSK		GENMASK(13, 8)
+
+#define ANA_RG_CTRL_SIGNAL4		0x58
+#define RG_CDR_BICLTR_GEN1_MSK		GENMASK(23, 20)
+/* Loop filter R1 resistance adjustment for Gen1 speed */
+#define RG_CDR_BR_GEN2_MSK		GENMASK(10, 8)
+
+#define ANA_RG_CTRL_SIGNAL6		0x60
+/* I-path capacitance adjustment for Gen1 */
+#define RG_CDR_BC_GEN1_MSK		GENMASK(28, 24)
+#define RG_CDR_BIRLTR_GEN1_MSK		GENMASK(4, 0)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL1		0x6c
+/* RX Gen1 LEQ tuning step */
+#define RG_EQ_DLEQ_LFI_GEN1_MSK		GENMASK(11, 8)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL4		0xd8
+#define RG_CDR_BIRLTD0_GEN1_MSK		GENMASK(20, 16)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL5		0xdc
+#define RG_CDR_BIRLTD0_GEN3_MSK		GENMASK(4, 0)
+
+/* PHY switch between pcie/usb3/sgmii/sata */
+#define USB_PHY_SWITCH_CTRL	0x0
+#define RG_PHY_SW_TYPE		GENMASK(3, 0)
+#define RG_PHY_SW_PCIE		0x0
+#define RG_PHY_SW_USB3		0x1
+#define RG_PHY_SW_SGMII		0x2
+#define RG_PHY_SW_SATA		0x3
+
+#define TPHY_CLKS_CNT	2
+
+#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
+
+enum mtk_phy_version {
+	MTK_PHY_V1 = 1,
+	MTK_PHY_V2,
+	MTK_PHY_V3,
+};
+
+struct mtk_phy_pdata {
+	/* avoid RX sensitivity level degradation only for mt8173 */
+	bool avoid_rx_sen_degradation;
+	/*
+	 * workaround only for mt8195, HW fix it for others of V3,
+	 * u2phy should use integer mode instead of fractional mode of
+	 * 48M PLL, fix it by switching PLL to 26M from default 48M
+	 */
+	bool sw_pll_48m_to_26m;
+	/*
+	 * Some SoCs (e.g. mt8195) drop a bit when use auto load efuse,
+	 * support sw way, also support it for v2/v3 optionally.
+	 */
+	bool sw_efuse_supported;
+	enum mtk_phy_version version;
+};
+
+struct u2phy_banks {
+	void __iomem *misc;
+	void __iomem *fmreg;
+	void __iomem *com;
+};
+
+struct u3phy_banks {
+	void __iomem *spllc;
+	void __iomem *chip;
+	void __iomem *phyd; /* include u3phyd_bank2 */
+	void __iomem *phya; /* include u3phya_da */
+};
+
+struct mtk_phy_instance {
+	struct phy *phy;
+	void __iomem *port_base;
+	union {
+		struct u2phy_banks u2_banks;
+		struct u3phy_banks u3_banks;
+	};
+	struct clk_bulk_data clks[TPHY_CLKS_CNT];
+	u32 index;
+	u32 type;
+	struct regmap *type_sw;
+	u32 type_sw_reg;
+	u32 type_sw_index;
+	u32 efuse_sw_en;
+	u32 efuse_intr;
+	u32 efuse_tx_imp;
+	u32 efuse_rx_imp;
+	int eye_src;
+	int eye_vrt;
+	int eye_term;
+	int intr;
+	int discth;
+	int pre_emphasis;
+	bool bc12_en;
+};
+
+struct mtk_tphy {
+	struct device *dev;
+	void __iomem *sif_base;	/* only shared sif */
+	const struct mtk_phy_pdata *pdata;
+	struct mtk_phy_instance **phys;
+	int nphys;
+	int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
+	int src_coef; /* coefficient for slew rate calibrate */
+};
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+
+enum u2_phy_params {
+	U2P_EYE_VRT = 0,
+	U2P_EYE_TERM,
+	U2P_EFUSE_EN,
+	U2P_EFUSE_INTR,
+	U2P_DISCTH,
+	U2P_PRE_EMPHASIS,
+};
+
+enum u3_phy_params {
+	U3P_EFUSE_EN = 0,
+	U3P_EFUSE_INTR,
+	U3P_EFUSE_TX_IMP,
+	U3P_EFUSE_RX_IMP,
+};
+
+static const char *const u2_phy_files[] = {
+	[U2P_EYE_VRT] = "vrt",
+	[U2P_EYE_TERM] = "term",
+	[U2P_EFUSE_EN] = "efuse",
+	[U2P_EFUSE_INTR] = "intr",
+	[U2P_DISCTH] = "discth",
+	[U2P_PRE_EMPHASIS] = "preemph",
+};
+
+static const char *const u3_phy_files[] = {
+	[U3P_EFUSE_EN] = "efuse",
+	[U3P_EFUSE_INTR] = "intr",
+	[U3P_EFUSE_TX_IMP] = "tx-imp",
+	[U3P_EFUSE_RX_IMP] = "rx-imp",
+};
+
+static int u2_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 max = 0;
+	u32 tmp = 0;
+	u32 val = 0;
+	int ret;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_VRT_SEL);
+		break;
+
+	case U2P_EYE_TERM:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_TERM_SEL);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc) {
+			tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+			max = 1;
+		}
+
+		val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
+		break;
+
+	case U2P_EFUSE_INTR:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
+		max = FIELD_MAX(PA1_RG_INTR_CAL);
+		break;
+
+	case U2P_DISCTH:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
+		max = FIELD_MAX(PA6_RG_U2_DISCTH);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
+		max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u2_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u2_phy_params_show, inode->i_private);
+}
+
+static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
+		break;
+
+	case U2P_EYE_TERM:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc)
+			mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
+					     MR1_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U2P_EFUSE_INTR:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
+		break;
+
+	case U2P_DISCTH:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u2_phy_fops = {
+	.open = u2_phy_params_open,
+	.write = u2_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u2_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u2_phy_files[i], 0644, inst->phy->debugfs,
+				    inst, &u2_phy_fops);
+}
+
+static int u3_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	u32 val = 0;
+	u32 max = 0;
+	u32 tmp;
+	int ret;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+		val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
+		max = 1;
+		break;
+
+	case U3P_EFUSE_INTR:
+		tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+		val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
+		max = FIELD_MAX(P3A_RG_IEXT_INTR);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+		val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+		val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_RX_IMPEL);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u3_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u3_phy_params_show, inode->i_private);
+}
+
+static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	void __iomem *phyd = u3_banks->phyd;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
+				     P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U3P_EFUSE_INTR:
+		mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0,
+				     P3A_RG_IEXT_INTR, val);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u3_phy_fops = {
+	.open = u3_phy_params_open,
+	.write = u3_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u3_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u3_phy_files[i], 0644, inst->phy->debugfs,
+				    inst, &u3_phy_fops);
+}
+
+static int phy_type_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *type;
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		type = "USB2";
+		break;
+	case PHY_TYPE_USB3:
+		type = "USB3";
+		break;
+	case PHY_TYPE_PCIE:
+		type = "PCIe";
+		break;
+	case PHY_TYPE_SGMII:
+		type = "SGMII";
+		break;
+	case PHY_TYPE_SATA:
+		type = "SATA";
+		break;
+	default:
+		type = "";
+	}
+
+	seq_printf(sf, "%s\n", type);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(phy_type);
+
+/* these files will be removed when phy is released by phy core */
+static void phy_debugfs_init(struct mtk_phy_instance *inst)
+{
+	debugfs_create_file("type", 0444, inst->phy->debugfs, inst, &phy_type_fops);
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		u2_phy_dbgfs_files_create(inst);
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_phy_dbgfs_files_create(inst);
+		break;
+	default:
+		break;
+	}
+}
+
+#else
+
+static void phy_debugfs_init(struct mtk_phy_instance *inst)
+{}
+
+#endif
+
+static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *fmreg = u2_banks->fmreg;
+	void __iomem *com = u2_banks->com;
+	int calibration_val;
+	int fm_out;
+	u32 tmp;
+
+	/* HW V3 doesn't support slew rate cal anymore */
+	if (tphy->pdata->version == MTK_PHY_V3)
+		return;
+
+	/* use force value */
+	if (instance->eye_src)
+		return;
+
+	/* enable USB ring oscillator */
+	mtk_phy_set_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN);
+	udelay(1);
+
+	/*enable free run clock */
+	mtk_phy_set_bits(fmreg + U3P_U2FREQ_FMMONR1, P2F_RG_FRCK_EN);
+
+	/* set cycle count as 1024, and select u2 channel */
+	tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
+	tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
+	tmp |= FIELD_PREP(P2F_RG_CYCLECNT, U3P_FM_DET_CYCLE_CNT);
+	if (tphy->pdata->version == MTK_PHY_V1)
+		tmp |= FIELD_PREP(P2F_RG_MONCLK_SEL, instance->index >> 1);
+
+	writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
+
+	/* enable frequency meter */
+	mtk_phy_set_bits(fmreg + U3P_U2FREQ_FMCR0, P2F_RG_FREQDET_EN);
+
+	/* ignore return value */
+	readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp,
+			   (tmp & P2F_USB_FM_VALID), 10, 200);
+
+	fm_out = readl(fmreg + U3P_U2FREQ_VALUE);
+
+	/* disable frequency meter */
+	mtk_phy_clear_bits(fmreg + U3P_U2FREQ_FMCR0, P2F_RG_FREQDET_EN);
+
+	/*disable free run clock */
+	mtk_phy_clear_bits(fmreg + U3P_U2FREQ_FMMONR1, P2F_RG_FRCK_EN);
+
+	if (fm_out) {
+		/* ( 1024 / FM_OUT ) x reference clock frequency x coef */
+		tmp = tphy->src_ref_clk * tphy->src_coef;
+		tmp = (tmp * U3P_FM_DET_CYCLE_CNT) / fm_out;
+		calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
+	} else {
+		/* if FM detection fail, set default value */
+		calibration_val = 4;
+	}
+	dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n",
+		instance->index, fm_out, calibration_val,
+		tphy->src_ref_clk, tphy->src_coef);
+
+	/* set HS slew rate */
+	mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
+			     calibration_val);
+
+	/* disable USB ring oscillator */
+	mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN);
+}
+
+static void u3_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+	void __iomem *phya = u3_banks->phya;
+	void __iomem *phyd = u3_banks->phyd;
+
+	/* gating PCIe Analog XTAL clock */
+	mtk_phy_set_bits(u3_banks->spllc + U3P_SPLLC_XTALCTL3,
+			 XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD);
+
+	/* gating XSQ */
+	mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG0, P3A_RG_XTAL_EXT_EN_U3, 2);
+
+	mtk_phy_update_field(phya + U3P_U3_PHYA_REG9, P3A_RG_RX_DAC_MUX, 4);
+
+	mtk_phy_update_field(phya + U3P_U3_PHYA_REG6, P3A_RG_TX_EIDLE_CM, 0xe);
+
+	mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_CDR1,
+			    P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1,
+			    FIELD_PREP(P3D_RG_CDR_BIR_LTD0, 0xc) |
+			    FIELD_PREP(P3D_RG_CDR_BIR_LTD1, 0x3));
+
+	mtk_phy_update_field(phyd + U3P_U3_PHYD_LFPS1, P3D_RG_FWAKE_TH, 0x34);
+
+	mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET1, P3D_RG_RXDET_STB2_SET, 0x10);
+
+	mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET2, P3D_RG_RXDET_STB2_SET_P3, 0x10);
+
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void u2_phy_pll_26m_set(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
+
+	if (!tphy->pdata->sw_pll_48m_to_26m)
+		return;
+
+	mtk_phy_update_field(com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV, 0);
+
+	mtk_phy_update_field(com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW, 3);
+
+	writel(P2R_RG_U2PLL_FBDIV_26M, com + U3P_U2PHYA_RESV);
+
+	mtk_phy_set_bits(com + U3P_U2PHYA_RESV1,
+			 P2R_RG_U2PLL_FRA_EN | P2R_RG_U2PLL_REFCLK_SEL);
+}
+
+static void u2_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 index = instance->index;
+
+	/* switch to USB function, and enable usb pll */
+	mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM);
+
+	mtk_phy_clear_bits(com + U3P_U2PHYDTM0,
+			   P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
+
+	mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_UART_EN);
+
+	mtk_phy_set_bits(com + U3P_USBPHYACR0, PA0_RG_USB20_INTR_EN);
+
+	/* disable switch 100uA current to SSUSB */
+	mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);
+
+	mtk_phy_clear_bits(com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
+
+	if (tphy->pdata->avoid_rx_sen_degradation) {
+		if (!index) {
+			mtk_phy_set_bits(com + U3P_USBPHYACR2, PA2_RG_SIF_U2PLL_FORCE_EN);
+
+			mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
+		} else {
+			mtk_phy_set_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
+
+			mtk_phy_set_bits(com + U3P_U2PHYDTM0,
+					 P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
+		}
+	}
+
+	/* DP/DM BC1.1 path Disable */
+	mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_BC11_SW_EN);
+
+	mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_SQTH, 2);
+
+	/* Workaround only for mt8195, HW fix it for others (V3) */
+	u2_phy_pll_26m_set(tphy, instance);
+
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_power_on(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 index = instance->index;
+
+	/* OTG Enable */
+	mtk_phy_set_bits(com + U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN);
+
+	mtk_phy_set_bits(com + U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID);
+
+	mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_SESSEND);
+
+	if (tphy->pdata->avoid_rx_sen_degradation && index) {
+		mtk_phy_set_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
+
+		mtk_phy_set_bits(com + U3P_U2PHYDTM0, P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
+	}
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_power_off(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 index = instance->index;
+
+	/* OTG Disable */
+	mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN);
+
+	mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID);
+
+	mtk_phy_set_bits(com + U3P_U2PHYDTM1, P2C_RG_SESSEND);
+
+	if (tphy->pdata->avoid_rx_sen_degradation && index) {
+		mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
+
+		mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
+	}
+
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_exit(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 index = instance->index;
+
+	if (tphy->pdata->avoid_rx_sen_degradation && index) {
+		mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
+
+		mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_FORCE_SUSPENDM);
+	}
+}
+
+static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
+				     struct mtk_phy_instance *instance,
+				     enum phy_mode mode)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	u32 tmp;
+
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
+	switch (mode) {
+	case PHY_MODE_USB_DEVICE:
+		tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
+		break;
+	case PHY_MODE_USB_HOST:
+		tmp |= P2C_FORCE_IDDIG;
+		tmp &= ~P2C_RG_IDDIG;
+		break;
+	case PHY_MODE_USB_OTG:
+		tmp &= ~(P2C_FORCE_IDDIG | P2C_RG_IDDIG);
+		break;
+	default:
+		return;
+	}
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM1);
+}
+
+static void pcie_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+	void __iomem *phya = u3_banks->phya;
+
+	if (tphy->pdata->version != MTK_PHY_V1)
+		return;
+
+	mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG0,
+			    P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H,
+			    FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) |
+			    FIELD_PREP(P3A_RG_XTAL_EXT_PE2H, 0x2));
+
+	/* ref clk drive */
+	mtk_phy_update_field(phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, 0x4);
+
+	mtk_phy_update_field(phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, 0x1);
+
+	/* SSC delta -5000ppm */
+	mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG20, P3A_RG_PLL_DELTA1_PE2H, 0x3c);
+
+	mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG25, P3A_RG_PLL_DELTA_PE2H, 0x36);
+
+	/* change pll BW 0.6M */
+	mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG5,
+			    P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H,
+			    FIELD_PREP(P3A_RG_PLL_BR_PE2H, 0x1) |
+			    FIELD_PREP(P3A_RG_PLL_IC_PE2H, 0x1));
+
+	mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG4,
+			    P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H,
+			    FIELD_PREP(P3A_RG_PLL_BC_PE2H, 0x3));
+
+	mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG6, P3A_RG_PLL_IR_PE2H, 0x2);
+
+	mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG7, P3A_RG_PLL_BP_PE2H, 0xa);
+
+	/* Tx Detect Rx Timing: 10us -> 5us */
+	mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
+			     P3D_RG_RXDET_STB2_SET, 0x10);
+
+	mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
+			     P3D_RG_RXDET_STB2_SET_P3, 0x10);
+
+	/* wait for PCIe subsys register to active */
+	usleep_range(2500, 3000);
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u3phy_banks *bank = &instance->u3_banks;
+
+	mtk_phy_clear_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLD,
+			   P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
+
+	mtk_phy_clear_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLE,
+			   P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
+}
+
+static void pcie_phy_instance_power_off(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+
+{
+	struct u3phy_banks *bank = &instance->u3_banks;
+
+	mtk_phy_set_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLD,
+			 P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
+
+	mtk_phy_set_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLE,
+			 P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
+}
+
+static void sata_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+	void __iomem *phyd = u3_banks->phyd;
+
+	/* charge current adjustment */
+	mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL6,
+			    RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK,
+			    FIELD_PREP(RG_CDR_BIRLTR_GEN1_MSK, 0x6) |
+			    FIELD_PREP(RG_CDR_BC_GEN1_MSK, 0x1a));
+
+	mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL4, RG_CDR_BIRLTD0_GEN1_MSK, 0x18);
+
+	mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL5, RG_CDR_BIRLTD0_GEN3_MSK, 0x06);
+
+	mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL4,
+			    RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK,
+			    FIELD_PREP(RG_CDR_BICLTR_GEN1_MSK, 0x0c) |
+			    FIELD_PREP(RG_CDR_BR_GEN2_MSK, 0x07));
+
+	mtk_phy_update_bits(phyd + PHYD_CTRL_SIGNAL_MODE4,
+			    RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK,
+			    FIELD_PREP(RG_CDR_BICLTD0_GEN1_MSK, 0x08) |
+			    FIELD_PREP(RG_CDR_BICLTD1_GEN1_MSK, 0x02));
+
+	mtk_phy_update_field(phyd + PHYD_DESIGN_OPTION2, RG_LOCK_CNT_SEL_MSK, 0x02);
+
+	mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9,
+			    RG_T2_MIN_MSK | RG_TG_MIN_MSK,
+			    FIELD_PREP(RG_T2_MIN_MSK, 0x12) |
+			    FIELD_PREP(RG_TG_MIN_MSK, 0x04));
+
+	mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9,
+			    RG_T2_MAX_MSK | RG_TG_MAX_MSK,
+			    FIELD_PREP(RG_T2_MAX_MSK, 0x31) |
+			    FIELD_PREP(RG_TG_MAX_MSK, 0x0e));
+
+	mtk_phy_update_field(phyd + ANA_RG_CTRL_SIGNAL1, RG_IDRV_0DB_GEN1_MSK, 0x20);
+
+	mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL1, RG_EQ_DLEQ_LFI_GEN1_MSK, 0x03);
+
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void phy_v1_banks_init(struct mtk_tphy *tphy,
+			      struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		u2_banks->misc = NULL;
+		u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
+		u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
+		u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
+		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
+		break;
+	case PHY_TYPE_SATA:
+		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+		break;
+	default:
+		dev_err(tphy->dev, "incompatible PHY type\n");
+		return;
+	}
+}
+
+static void phy_v2_banks_init(struct mtk_tphy *tphy,
+			      struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
+		u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
+		u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
+		u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
+		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
+		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+		break;
+	default:
+		dev_err(tphy->dev, "incompatible PHY type\n");
+		return;
+	}
+}
+
+static void phy_parse_property(struct mtk_tphy *tphy,
+				struct mtk_phy_instance *instance)
+{
+	struct device *dev = &instance->phy->dev;
+
+	if (instance->type != PHY_TYPE_USB2)
+		return;
+
+	instance->bc12_en = device_property_read_bool(dev, "mediatek,bc12");
+	device_property_read_u32(dev, "mediatek,eye-src",
+				 &instance->eye_src);
+	device_property_read_u32(dev, "mediatek,eye-vrt",
+				 &instance->eye_vrt);
+	device_property_read_u32(dev, "mediatek,eye-term",
+				 &instance->eye_term);
+	device_property_read_u32(dev, "mediatek,intr",
+				 &instance->intr);
+	device_property_read_u32(dev, "mediatek,discth",
+				 &instance->discth);
+	device_property_read_u32(dev, "mediatek,pre-emphasis",
+				 &instance->pre_emphasis);
+	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, intr:%d, disc:%d\n",
+		instance->bc12_en, instance->eye_src,
+		instance->eye_vrt, instance->eye_term,
+		instance->intr, instance->discth);
+	dev_dbg(dev, "pre-emp:%d\n", instance->pre_emphasis);
+}
+
+static void u2_phy_props_set(struct mtk_tphy *tphy,
+			     struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
+
+	if (instance->bc12_en) /* BC1.2 path Enable */
+		mtk_phy_set_bits(com + U3P_U2PHYBC12C, P2C_RG_CHGDT_EN);
+
+	if (tphy->pdata->version < MTK_PHY_V3 && instance->eye_src)
+		mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
+				     instance->eye_src);
+
+	if (instance->eye_vrt)
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL,
+				     instance->eye_vrt);
+
+	if (instance->eye_term)
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL,
+				     instance->eye_term);
+
+	if (instance->intr) {
+		if (u2_banks->misc)
+			mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1,
+					 MR1_EFUSE_AUTO_LOAD_DIS);
+
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
+				     instance->intr);
+	}
+
+	if (instance->discth)
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH,
+				     instance->discth);
+
+	if (instance->pre_emphasis)
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP,
+				     instance->pre_emphasis);
+}
+
+/* type switch for usb3/pcie/sgmii/sata */
+static int phy_type_syscon_get(struct mtk_phy_instance *instance,
+			       struct device_node *dn)
+{
+	struct of_phandle_args args;
+	int ret;
+
+	/* type switch function is optional */
+	if (!of_property_read_bool(dn, "mediatek,syscon-type"))
+		return 0;
+
+	ret = of_parse_phandle_with_fixed_args(dn, "mediatek,syscon-type",
+					       2, 0, &args);
+	if (ret)
+		return ret;
+
+	instance->type_sw_reg = args.args[0];
+	instance->type_sw_index = args.args[1] & 0x3; /* <=3 */
+	instance->type_sw = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	dev_info(&instance->phy->dev, "type_sw - reg %#x, index %d\n",
+		 instance->type_sw_reg, instance->type_sw_index);
+
+	return PTR_ERR_OR_ZERO(instance->type_sw);
+}
+
+static int phy_type_set(struct mtk_phy_instance *instance)
+{
+	int type;
+	u32 offset;
+
+	if (!instance->type_sw)
+		return 0;
+
+	switch (instance->type) {
+	case PHY_TYPE_USB3:
+		type = RG_PHY_SW_USB3;
+		break;
+	case PHY_TYPE_PCIE:
+		type = RG_PHY_SW_PCIE;
+		break;
+	case PHY_TYPE_SGMII:
+		type = RG_PHY_SW_SGMII;
+		break;
+	case PHY_TYPE_SATA:
+		type = RG_PHY_SW_SATA;
+		break;
+	case PHY_TYPE_USB2:
+	default:
+		return 0;
+	}
+
+	offset = instance->type_sw_index * BITS_PER_BYTE;
+	regmap_update_bits(instance->type_sw, instance->type_sw_reg,
+			   RG_PHY_SW_TYPE << offset, type << offset);
+
+	return 0;
+}
+
+static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
+{
+	struct device *dev = &instance->phy->dev;
+	int ret = 0;
+
+	/* tphy v1 doesn't support sw efuse, skip it */
+	if (!tphy->pdata->sw_efuse_supported) {
+		instance->efuse_sw_en = 0;
+		return 0;
+	}
+
+	/* software efuse is optional */
+	instance->efuse_sw_en = device_property_read_bool(dev, "nvmem-cells");
+	if (!instance->efuse_sw_en)
+		return 0;
+
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
+		if (ret) {
+			dev_err(dev, "fail to get u2 intr efuse, %d\n", ret);
+			break;
+		}
+
+		/* no efuse, ignore it */
+		if (!instance->efuse_intr) {
+			dev_warn(dev, "no u2 intr efuse, but dts enable it\n");
+			instance->efuse_sw_en = 0;
+			break;
+		}
+
+		dev_dbg(dev, "u2 efuse - intr %x\n", instance->efuse_intr);
+		break;
+
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
+		if (ret) {
+			dev_err(dev, "fail to get u3 intr efuse, %d\n", ret);
+			break;
+		}
+
+		ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp", &instance->efuse_rx_imp);
+		if (ret) {
+			dev_err(dev, "fail to get u3 rx_imp efuse, %d\n", ret);
+			break;
+		}
+
+		ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp", &instance->efuse_tx_imp);
+		if (ret) {
+			dev_err(dev, "fail to get u3 tx_imp efuse, %d\n", ret);
+			break;
+		}
+
+		/* no efuse, ignore it */
+		if (!instance->efuse_intr &&
+		    !instance->efuse_rx_imp &&
+		    !instance->efuse_tx_imp) {
+			dev_warn(dev, "no u3 intr efuse, but dts enable it\n");
+			instance->efuse_sw_en = 0;
+			break;
+		}
+
+		dev_dbg(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n",
+			instance->efuse_intr, instance->efuse_rx_imp,instance->efuse_tx_imp);
+		break;
+	default:
+		dev_err(dev, "no sw efuse for type %d\n", instance->type);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void phy_efuse_set(struct mtk_phy_instance *instance)
+{
+	struct device *dev = &instance->phy->dev;
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+	if (!instance->efuse_sw_en)
+		return;
+
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, MR1_EFUSE_AUTO_LOAD_DIS);
+
+		mtk_phy_update_field(u2_banks->com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
+				     instance->efuse_intr);
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_RSV, P3D_RG_EFUSE_AUTO_LOAD_DIS);
+
+		mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL,
+				    instance->efuse_tx_imp);
+		mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+
+		mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL,
+				    instance->efuse_rx_imp);
+		mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+
+		mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR,
+				    instance->efuse_intr);
+		break;
+	default:
+		dev_warn(dev, "no sw efuse for type %d\n", instance->type);
+		break;
+	}
+}
+
+static int mtk_phy_init(struct phy *phy)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(TPHY_CLKS_CNT, instance->clks);
+	if (ret)
+		return ret;
+
+	phy_efuse_set(instance);
+
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		u2_phy_instance_init(tphy, instance);
+		u2_phy_props_set(tphy, instance);
+		break;
+	case PHY_TYPE_USB3:
+		u3_phy_instance_init(tphy, instance);
+		break;
+	case PHY_TYPE_PCIE:
+		pcie_phy_instance_init(tphy, instance);
+		break;
+	case PHY_TYPE_SATA:
+		sata_phy_instance_init(tphy, instance);
+		break;
+	case PHY_TYPE_SGMII:
+		/* nothing to do, only used to set type */
+		break;
+	default:
+		dev_err(tphy->dev, "incompatible PHY type\n");
+		clk_bulk_disable_unprepare(TPHY_CLKS_CNT, instance->clks);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mtk_phy_power_on(struct phy *phy)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+	if (instance->type == PHY_TYPE_USB2) {
+		u2_phy_instance_power_on(tphy, instance);
+		hs_slew_rate_calibrate(tphy, instance);
+	} else if (instance->type == PHY_TYPE_PCIE) {
+		pcie_phy_instance_power_on(tphy, instance);
+	}
+
+	return 0;
+}
+
+static int mtk_phy_power_off(struct phy *phy)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+	if (instance->type == PHY_TYPE_USB2)
+		u2_phy_instance_power_off(tphy, instance);
+	else if (instance->type == PHY_TYPE_PCIE)
+		pcie_phy_instance_power_off(tphy, instance);
+
+	return 0;
+}
+
+static int mtk_phy_exit(struct phy *phy)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+	if (instance->type == PHY_TYPE_USB2)
+		u2_phy_instance_exit(tphy, instance);
+
+	clk_bulk_disable_unprepare(TPHY_CLKS_CNT, instance->clks);
+	return 0;
+}
+
+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+	if (instance->type == PHY_TYPE_USB2)
+		u2_phy_instance_set_mode(tphy, instance, mode);
+
+	return 0;
+}
+
+static struct phy *mtk_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct mtk_tphy *tphy = dev_get_drvdata(dev);
+	struct mtk_phy_instance *instance = NULL;
+	struct device_node *phy_np = args->np;
+	int index;
+	int ret;
+
+	if (args->args_count != 1) {
+		dev_err(dev, "invalid number of cells in 'phy' property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	for (index = 0; index < tphy->nphys; index++)
+		if (phy_np == tphy->phys[index]->phy->dev.of_node) {
+			instance = tphy->phys[index];
+			break;
+		}
+
+	if (!instance) {
+		dev_err(dev, "failed to find appropriate phy\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	instance->type = args->args[0];
+	if (!(instance->type == PHY_TYPE_USB2 ||
+	      instance->type == PHY_TYPE_USB3 ||
+	      instance->type == PHY_TYPE_PCIE ||
+	      instance->type == PHY_TYPE_SATA ||
+	      instance->type == PHY_TYPE_SGMII)) {
+		dev_err(dev, "unsupported device type: %d\n", instance->type);
+		return ERR_PTR(-EINVAL);
+	}
+
+	switch (tphy->pdata->version) {
+	case MTK_PHY_V1:
+		phy_v1_banks_init(tphy, instance);
+		break;
+	case MTK_PHY_V2:
+	case MTK_PHY_V3:
+		phy_v2_banks_init(tphy, instance);
+		break;
+	default:
+		dev_err(dev, "phy version is not supported\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = phy_efuse_get(tphy, instance);
+	if (ret)
+		return ERR_PTR(ret);
+
+	phy_parse_property(tphy, instance);
+	phy_type_set(instance);
+	phy_debugfs_init(instance);
+
+	return instance->phy;
+}
+
+static const struct phy_ops mtk_tphy_ops = {
+	.init		= mtk_phy_init,
+	.exit		= mtk_phy_exit,
+	.power_on	= mtk_phy_power_on,
+	.power_off	= mtk_phy_power_off,
+	.set_mode	= mtk_phy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static const struct mtk_phy_pdata tphy_v1_pdata = {
+	.avoid_rx_sen_degradation = false,
+	.version = MTK_PHY_V1,
+};
+
+static const struct mtk_phy_pdata tphy_v2_pdata = {
+	.avoid_rx_sen_degradation = false,
+	.sw_efuse_supported = true,
+	.version = MTK_PHY_V2,
+};
+
+static const struct mtk_phy_pdata tphy_v3_pdata = {
+	.sw_efuse_supported = true,
+	.version = MTK_PHY_V3,
+};
+
+static const struct mtk_phy_pdata mt8173_pdata = {
+	.avoid_rx_sen_degradation = true,
+	.version = MTK_PHY_V1,
+};
+
+static const struct mtk_phy_pdata mt8195_pdata = {
+	.sw_pll_48m_to_26m = true,
+	.sw_efuse_supported = true,
+	.version = MTK_PHY_V3,
+};
+
+static const struct of_device_id mtk_tphy_id_table[] = {
+	{ .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
+	{ .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
+	{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+	{ .compatible = "mediatek,mt8195-tphy", .data = &mt8195_pdata },
+	{ .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
+	{ .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
+	{ .compatible = "mediatek,generic-tphy-v3", .data = &tphy_v3_pdata },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mtk_tphy_id_table);
+
+static int mtk_tphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct phy_provider *provider;
+	struct resource *sif_res;
+	struct mtk_tphy *tphy;
+	struct resource res;
+	int port, retval;
+
+	tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL);
+	if (!tphy)
+		return -ENOMEM;
+
+	tphy->pdata = of_device_get_match_data(dev);
+	if (!tphy->pdata)
+		return -EINVAL;
+
+	tphy->nphys = of_get_child_count(np);
+	tphy->phys = devm_kcalloc(dev, tphy->nphys,
+				       sizeof(*tphy->phys), GFP_KERNEL);
+	if (!tphy->phys)
+		return -ENOMEM;
+
+	tphy->dev = dev;
+	platform_set_drvdata(pdev, tphy);
+
+	sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	/* SATA phy of V1 needn't it if not shared with PCIe or USB */
+	if (sif_res && tphy->pdata->version == MTK_PHY_V1) {
+		/* get banks shared by multiple phys */
+		tphy->sif_base = devm_ioremap_resource(dev, sif_res);
+		if (IS_ERR(tphy->sif_base)) {
+			dev_err(dev, "failed to remap sif regs\n");
+			return PTR_ERR(tphy->sif_base);
+		}
+	}
+
+	if (tphy->pdata->version < MTK_PHY_V3) {
+		tphy->src_ref_clk = U3P_REF_CLK;
+		tphy->src_coef = U3P_SLEW_RATE_COEF;
+		/* update parameters of slew rate calibrate if exist */
+		device_property_read_u32(dev, "mediatek,src-ref-clk-mhz",
+					 &tphy->src_ref_clk);
+		device_property_read_u32(dev, "mediatek,src-coef",
+					 &tphy->src_coef);
+	}
+
+	port = 0;
+	for_each_child_of_node(np, child_np) {
+		struct mtk_phy_instance *instance;
+		struct clk_bulk_data *clks;
+		struct device *subdev;
+		struct phy *phy;
+
+		instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
+		if (!instance) {
+			retval = -ENOMEM;
+			goto put_child;
+		}
+
+		tphy->phys[port] = instance;
+
+		phy = devm_phy_create(dev, child_np, &mtk_tphy_ops);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy\n");
+			retval = PTR_ERR(phy);
+			goto put_child;
+		}
+
+		subdev = &phy->dev;
+		retval = of_address_to_resource(child_np, 0, &res);
+		if (retval) {
+			dev_err(subdev, "failed to get address resource(id-%d)\n",
+				port);
+			goto put_child;
+		}
+
+		instance->port_base = devm_ioremap_resource(subdev, &res);
+		if (IS_ERR(instance->port_base)) {
+			retval = PTR_ERR(instance->port_base);
+			goto put_child;
+		}
+
+		instance->phy = phy;
+		instance->index = port;
+		phy_set_drvdata(phy, instance);
+		port++;
+
+		clks = instance->clks;
+		clks[0].id = "ref";     /* digital (& analog) clock */
+		clks[1].id = "da_ref";  /* analog clock */
+		retval = devm_clk_bulk_get_optional(subdev, TPHY_CLKS_CNT, clks);
+		if (retval)
+			goto put_child;
+
+		retval = phy_type_syscon_get(instance, child_np);
+		if (retval)
+			goto put_child;
+	}
+
+	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+put_child:
+	of_node_put(child_np);
+	return retval;
+}
+
+static struct platform_driver mtk_tphy_driver = {
+	.probe		= mtk_tphy_probe,
+	.driver		= {
+		.name	= "mtk-tphy",
+		.of_match_table = mtk_tphy_id_table,
+	},
+};
+
+module_platform_driver(mtk_tphy_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek T-PHY driver");
+MODULE_LICENSE("GPL v2");