Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 8 insertions, 148 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 4c32304dae..85253936fa 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -19,6 +19,8 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "phy-qcom-qmp-common.h"
+
 #include "phy-qcom-qmp.h"
 #include "phy-qcom-qmp-pcs-misc-v3.h"
 #include "phy-qcom-qmp-pcs-misc-v4.h"
@@ -27,67 +29,8 @@
 #include "phy-qcom-qmp-pcs-usb-v6.h"
 #include "phy-qcom-qmp-pcs-usb-v7.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-/* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
-/* QPHY_PCS_STATUS bit */
-#define PHYSTATUS				BIT(6)
-
-/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
-/* DP PHY soft reset */
-#define SW_DPPHY_RESET				BIT(0)
-/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
-#define SW_DPPHY_RESET_MUX			BIT(1)
-/* USB3 PHY soft reset */
-#define SW_USB3PHY_RESET			BIT(2)
-/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
-#define SW_USB3PHY_RESET_MUX			BIT(3)
-
-/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
-#define USB3_MODE				BIT(0) /* enables USB3 mode */
-#define DP_MODE					BIT(1) /* enables DP mode */
-
-/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
-#define ARCVR_DTCT_EN				BIT(0)
-#define ALFPS_DTCT_EN				BIT(1)
-#define ARCVR_DTCT_EVENT_SEL			BIT(4)
-
-/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
-#define IRQ_CLEAR				BIT(0)
-
-/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
-#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
-
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 
-struct qmp_phy_init_tbl {
-	unsigned int offset;
-	unsigned int val;
-	/*
-	 * mask of lanes for which this register is written
-	 * for cases when second lane needs different values
-	 */
-	u8 lane_mask;
-};
-
-#define QMP_PHY_INIT_CFG(o, v)		\
-	{				\
-		.offset = o,		\
-		.val = v,		\
-		.lane_mask = 0xff,	\
-	}
-
-#define QMP_PHY_INIT_CFG_LANE(o, v, l)	\
-	{				\
-		.offset = o,		\
-		.val = v,		\
-		.lane_mask = l,		\
-	}
-
 /* set of registers with offsets different per-PHY */
 enum qphy_reg_layout {
 	/* PCS registers */
@@ -1237,15 +1180,10 @@ struct qmp_usb_offsets {
 	u16 pcs_usb;
 	u16 tx;
 	u16 rx;
-	/* for PHYs with >= 2 lanes */
-	u16 tx2;
-	u16 rx2;
 };
 
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
-	int lanes;
-
 	const struct qmp_usb_offsets *offsets;
 
 	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
@@ -1285,8 +1223,6 @@ struct qmp_usb {
 	void __iomem *pcs_usb;
 	void __iomem *tx;
 	void __iomem *rx;
-	void __iomem *tx2;
-	void __iomem *rx2;
 
 	struct clk *pipe_clk;
 	struct clk_bulk_data *clks;
@@ -1401,8 +1337,6 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v7 = {
 };
 
 static const struct qmp_phy_cfg ipq6018_usb3phy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v3,
 
 	.serdes_tbl		= ipq9574_usb3_serdes_tbl,
@@ -1419,8 +1353,6 @@ static const struct qmp_phy_cfg ipq6018_usb3phy_cfg = {
 };
 
 static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v3,
 
 	.serdes_tbl		= ipq8074_usb3_serdes_tbl,
@@ -1437,8 +1369,6 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 };
 
 static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_ipq9574,
 
 	.serdes_tbl		= ipq9574_usb3_serdes_tbl,
@@ -1455,8 +1385,6 @@ static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
 };
 
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v3_msm8996,
 
 	.serdes_tbl		= msm8996_usb3_serdes_tbl,
@@ -1473,8 +1401,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 };
 
 static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v5,
 
 	.serdes_tbl		= sc8280xp_usb3_uniphy_serdes_tbl,
@@ -1493,8 +1419,6 @@ static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v5,
 
 	.serdes_tbl		= sc8280xp_usb3_uniphy_serdes_tbl,
@@ -1513,8 +1437,6 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v3,
 
 	.serdes_tbl		= qmp_v3_usb3_uniphy_serdes_tbl,
@@ -1533,8 +1455,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v4,
 
 	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
@@ -1556,8 +1476,6 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v4,
 
 	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
@@ -1579,8 +1497,6 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v4,
 
 	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
@@ -1602,8 +1518,6 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v5,
 
 	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
@@ -1625,7 +1539,6 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
-	.lanes			= 1,
 	.offsets		= &qmp_usb_offsets_v6,
 
 	.serdes_tbl		= sdx75_usb3_uniphy_serdes_tbl,
@@ -1647,8 +1560,6 @@ static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v5,
 
 	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
@@ -1670,8 +1581,6 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 };
 
 static const struct qmp_phy_cfg x1e80100_usb3_uniphy_cfg = {
-	.lanes			= 1,
-
 	.offsets		= &qmp_usb_offsets_v7,
 
 	.serdes_tbl		= x1e80100_usb3_uniphy_serdes_tbl,
@@ -1689,32 +1598,6 @@ static const struct qmp_phy_cfg x1e80100_usb3_uniphy_cfg = {
 	.regs			= qmp_v7_usb3phy_regs_layout,
 };
 
-static void qmp_usb_configure_lane(void __iomem *base,
-					const struct qmp_phy_init_tbl tbl[],
-					int num,
-					u8 lane_mask)
-{
-	int i;
-	const struct qmp_phy_init_tbl *t = tbl;
-
-	if (!t)
-		return;
-
-	for (i = 0; i < num; i++, t++) {
-		if (!(t->lane_mask & lane_mask))
-			continue;
-
-		writel(t->val, base + t->offset);
-	}
-}
-
-static void qmp_usb_configure(void __iomem *base,
-				   const struct qmp_phy_init_tbl tbl[],
-				   int num)
-{
-	qmp_usb_configure_lane(base, tbl, num, 0xff);
-}
-
 static int qmp_usb_serdes_init(struct qmp_usb *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -1722,7 +1605,7 @@ static int qmp_usb_serdes_init(struct qmp_usb *qmp)
 	const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
 	int serdes_tbl_num = cfg->serdes_tbl_num;
 
-	qmp_usb_configure(serdes, serdes_tbl, serdes_tbl_num);
+	qmp_configure(serdes, serdes_tbl, serdes_tbl_num);
 
 	return 0;
 }
@@ -1803,18 +1686,13 @@ static int qmp_usb_power_on(struct phy *phy)
 	}
 
 	/* Tx, Rx, and PCS configurations */
-	qmp_usb_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-	qmp_usb_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
+	qmp_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+	qmp_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
 
-	if (cfg->lanes >= 2) {
-		qmp_usb_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
-		qmp_usb_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
-	}
-
-	qmp_usb_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+	qmp_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	if (pcs_usb)
-		qmp_usb_configure(pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num);
+		qmp_configure(pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num);
 
 	if (cfg->has_pwrdn_delay)
 		usleep_range(10, 20);
@@ -2157,7 +2035,6 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np)
 	/*
 	 * Get memory resources for the PHY:
 	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
-	 * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
 	 * For single lane PHYs: pcs_misc (optional) -> 3.
 	 */
 	qmp->tx = devm_of_iomap(dev, np, 0, NULL);
@@ -2175,19 +2052,7 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np)
 	if (cfg->pcs_usb_offset)
 		qmp->pcs_usb = qmp->pcs + cfg->pcs_usb_offset;
 
-	if (cfg->lanes >= 2) {
-		qmp->tx2 = devm_of_iomap(dev, np, 3, NULL);
-		if (IS_ERR(qmp->tx2))
-			return PTR_ERR(qmp->tx2);
-
-		qmp->rx2 = devm_of_iomap(dev, np, 4, NULL);
-		if (IS_ERR(qmp->rx2))
-			return PTR_ERR(qmp->rx2);
-
-		qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
-	} else {
-		qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
-	}
+	qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
 
 	if (IS_ERR(qmp->pcs_misc)) {
 		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
@@ -2239,11 +2104,6 @@ static int qmp_usb_parse_dt(struct qmp_usb *qmp)
 	qmp->tx = base + offs->tx;
 	qmp->rx = base + offs->rx;
 
-	if (cfg->lanes >= 2) {
-		qmp->tx2 = base + offs->tx2;
-		qmp->rx2 = base + offs->rx2;
-	}
-
 	ret = qmp_usb_clk_init(qmp);
 	if (ret)
 		return ret;