Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 9133 insertions, 0 deletions

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
new file mode 100644
index 0000000000..94360fc96a
--- /dev/null
+++ b/drivers/phy/rockchip/Kconfig
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Rockchip platforms
+#
+config PHY_ROCKCHIP_DP
+	tristate "Rockchip Display Port PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip Display Port PHY.
+
+config PHY_ROCKCHIP_DPHY_RX0
+	tristate "Rockchip MIPI Synopsys DPHY RX0 driver"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	select GENERIC_PHY_MIPI_DPHY
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip MIPI Synopsys DPHY RX0
+	  associated to the Rockchip ISP module present in RK3399 SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called phy-rockchip-dphy-rx0.
+
+config PHY_ROCKCHIP_EMMC
+	tristate "Rockchip EMMC PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip EMMC PHY.
+
+config PHY_ROCKCHIP_INNO_HDMI
+	tristate "Rockchip INNO HDMI PHY Driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	depends on COMMON_CLK
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip Innosilicon HDMI PHY.
+
+config PHY_ROCKCHIP_INNO_USB2
+	tristate "Rockchip INNO USB2PHY Driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	depends on COMMON_CLK
+	depends on EXTCON
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_COMMON
+	help
+	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
+config PHY_ROCKCHIP_INNO_CSIDPHY
+	tristate "Rockchip Innosilicon MIPI CSI PHY driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Enable this to support the Rockchip MIPI CSI PHY with
+	  Innosilicon IP block.
+
+config PHY_ROCKCHIP_INNO_DSIDPHY
+	tristate "Rockchip Innosilicon MIPI/LVDS/TTL PHY driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Enable this to support the Rockchip MIPI/LVDS/TTL PHY with
+	  Innosilicon IP block.
+
+config PHY_ROCKCHIP_NANENG_COMBO_PHY
+	tristate "Rockchip NANENG COMBO PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII
+	  combo PHY with NaNeng IP block.
+
+config PHY_ROCKCHIP_PCIE
+	tristate "Rockchip PCIe PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip PCIe PHY.
+
+config PHY_ROCKCHIP_SNPS_PCIE3
+	tristate "Rockchip Snps PCIe3 PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip snps PCIe3 PHY.
+
+config PHY_ROCKCHIP_TYPEC
+	tristate "Rockchip TYPEC PHY Driver"
+	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	select EXTCON
+	select GENERIC_PHY
+	select RESET_CONTROLLER
+	help
+	  Enable this to support the Rockchip USB TYPEC PHY.
+
+config PHY_ROCKCHIP_USB
+	tristate "Rockchip USB2 PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip USB 2.0 PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
new file mode 100644
index 0000000000..7eab129230
--- /dev/null
+++ b/drivers/phy/rockchip/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0)     += phy-rockchip-dphy-rx0.o
+obj-$(CONFIG_PHY_ROCKCHIP_EMMC)		+= phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY)	+= phy-rockchip-inno-csidphy.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY)	+= phy-rockchip-inno-dsidphy.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
+obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
new file mode 100644
index 0000000000..592aa956ee
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2016 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define GRF_SOC_CON12                           0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER               BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK           BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON                    0
+#define GRF_EDP_PHY_SIDDQ_OFF                   BIT(5)
+
+struct rockchip_dp_phy {
+	struct device  *dev;
+	struct regmap  *grf;
+	struct clk     *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+	int ret;
+
+	if (enable) {
+		ret = regmap_write(dp->grf, GRF_SOC_CON12,
+				   GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+				   GRF_EDP_PHY_SIDDQ_ON);
+		if (ret < 0) {
+			dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(dp->phy_24m);
+	} else {
+		clk_disable_unprepare(dp->phy_24m);
+
+		ret = regmap_write(dp->grf, GRF_SOC_CON12,
+				   GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+				   GRF_EDP_PHY_SIDDQ_OFF);
+	}
+
+	return ret;
+}
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+	return rockchip_set_phy_state(phy, true);
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+	return rockchip_set_phy_state(phy, false);
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+	.power_on	= rockchip_dp_phy_power_on,
+	.power_off	= rockchip_dp_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_dp_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct rockchip_dp_phy *dp;
+	struct phy *phy;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	if (!dev->parent || !dev->parent->of_node)
+		return -ENODEV;
+
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	dp->dev = dev;
+
+	dp->phy_24m = devm_clk_get(dev, "24m");
+	if (IS_ERR(dp->phy_24m)) {
+		dev_err(dev, "cannot get clock 24m\n");
+		return PTR_ERR(dp->phy_24m);
+	}
+
+	ret = clk_set_rate(dp->phy_24m, 24000000);
+	if (ret < 0) {
+		dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
+		return ret;
+	}
+
+	dp->grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(dp->grf)) {
+		dev_err(dev, "rk3288-dp needs the General Register Files syscon\n");
+		return PTR_ERR(dp->grf);
+	}
+
+	ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER |
+			   GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK);
+	if (ret != 0) {
+		dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
+		return ret;
+	}
+
+	phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, dp);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3288-dp-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
+
+static struct platform_driver rockchip_dp_phy_driver = {
+	.probe		= rockchip_dp_phy_probe,
+	.driver		= {
+		.name	= "rockchip-dp-phy",
+		.of_match_table = rockchip_dp_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_dp_phy_driver);
+
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip DP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
new file mode 100644
index 0000000000..e6a768bbb9
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Rockchip MIPI Synopsys DPHY RX0 driver
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ *
+ * Based on:
+ *
+ * drivers/media/platform/rockchip/isp1/mipi_dphy_sy.c
+ * in https://chromium.googlesource.com/chromiumos/third_party/kernel,
+ * chromeos-4.4 branch.
+ *
+ * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *   Jacob Chen <jacob2.chen@rock-chips.com>
+ *   Shunqian Zheng <zhengsq@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define RK3399_GRF_SOC_CON9		0x6224
+#define RK3399_GRF_SOC_CON21		0x6254
+#define RK3399_GRF_SOC_CON22		0x6258
+#define RK3399_GRF_SOC_CON23		0x625c
+#define RK3399_GRF_SOC_CON24		0x6260
+#define RK3399_GRF_SOC_CON25		0x6264
+#define RK3399_GRF_SOC_STATUS1		0xe2a4
+
+#define CLOCK_LANE_HS_RX_CONTROL	0x34
+#define LANE0_HS_RX_CONTROL		0x44
+#define LANE1_HS_RX_CONTROL		0x54
+#define LANE2_HS_RX_CONTROL		0x84
+#define LANE3_HS_RX_CONTROL		0x94
+#define LANES_THS_SETTLE_CONTROL	0x75
+#define THS_SETTLE_COUNTER_THRESHOLD	0x04
+
+struct hsfreq_range {
+	u16 range_h;
+	u8 cfg_bit;
+};
+
+static const struct hsfreq_range rk3399_mipidphy_hsfreq_ranges[] = {
+	{   89, 0x00 }, {   99, 0x10 }, {  109, 0x20 }, {  129, 0x01 },
+	{  139, 0x11 }, {  149, 0x21 }, {  169, 0x02 }, {  179, 0x12 },
+	{  199, 0x22 }, {  219, 0x03 }, {  239, 0x13 }, {  249, 0x23 },
+	{  269, 0x04 }, {  299, 0x14 }, {  329, 0x05 }, {  359, 0x15 },
+	{  399, 0x25 }, {  449, 0x06 }, {  499, 0x16 }, {  549, 0x07 },
+	{  599, 0x17 }, {  649, 0x08 }, {  699, 0x18 }, {  749, 0x09 },
+	{  799, 0x19 }, {  849, 0x29 }, {  899, 0x39 }, {  949, 0x0a },
+	{  999, 0x1a }, { 1049, 0x2a }, { 1099, 0x3a }, { 1149, 0x0b },
+	{ 1199, 0x1b }, { 1249, 0x2b }, { 1299, 0x3b }, { 1349, 0x0c },
+	{ 1399, 0x1c }, { 1449, 0x2c }, { 1500, 0x3c }
+};
+
+static const char * const rk3399_mipidphy_clks[] = {
+	"dphy-ref",
+	"dphy-cfg",
+	"grf",
+};
+
+enum dphy_reg_id {
+	GRF_DPHY_RX0_TURNDISABLE = 0,
+	GRF_DPHY_RX0_FORCERXMODE,
+	GRF_DPHY_RX0_FORCETXSTOPMODE,
+	GRF_DPHY_RX0_ENABLE,
+	GRF_DPHY_RX0_TESTCLR,
+	GRF_DPHY_RX0_TESTCLK,
+	GRF_DPHY_RX0_TESTEN,
+	GRF_DPHY_RX0_TESTDIN,
+	GRF_DPHY_RX0_TURNREQUEST,
+	GRF_DPHY_RX0_TESTDOUT,
+	GRF_DPHY_TX0_TURNDISABLE,
+	GRF_DPHY_TX0_FORCERXMODE,
+	GRF_DPHY_TX0_FORCETXSTOPMODE,
+	GRF_DPHY_TX0_TURNREQUEST,
+	GRF_DPHY_TX1RX1_TURNDISABLE,
+	GRF_DPHY_TX1RX1_FORCERXMODE,
+	GRF_DPHY_TX1RX1_FORCETXSTOPMODE,
+	GRF_DPHY_TX1RX1_ENABLE,
+	GRF_DPHY_TX1RX1_MASTERSLAVEZ,
+	GRF_DPHY_TX1RX1_BASEDIR,
+	GRF_DPHY_TX1RX1_ENABLECLK,
+	GRF_DPHY_TX1RX1_TURNREQUEST,
+	GRF_DPHY_RX1_SRC_SEL,
+	/* rk3288 only */
+	GRF_CON_DISABLE_ISP,
+	GRF_CON_ISP_DPHY_SEL,
+	GRF_DSI_CSI_TESTBUS_SEL,
+	GRF_DVP_V18SEL,
+	/* below is for rk3399 only */
+	GRF_DPHY_RX0_CLK_INV_SEL,
+	GRF_DPHY_RX1_CLK_INV_SEL,
+};
+
+struct dphy_reg {
+	u16 offset;
+	u8 mask;
+	u8 shift;
+};
+
+#define PHY_REG(_offset, _width, _shift) \
+	{ .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
+
+static const struct dphy_reg rk3399_grf_dphy_regs[] = {
+	[GRF_DPHY_RX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON9, 4, 0),
+	[GRF_DPHY_RX0_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 10),
+	[GRF_DPHY_RX1_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 11),
+	[GRF_DPHY_RX0_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 0),
+	[GRF_DPHY_RX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 4),
+	[GRF_DPHY_RX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 8),
+	[GRF_DPHY_RX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 12),
+	[GRF_DPHY_TX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 0),
+	[GRF_DPHY_TX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 4),
+	[GRF_DPHY_TX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 8),
+	[GRF_DPHY_TX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 12),
+	[GRF_DPHY_TX1RX1_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 0),
+	[GRF_DPHY_TX1RX1_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 4),
+	[GRF_DPHY_TX1RX1_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 8),
+	[GRF_DPHY_TX1RX1_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 12),
+	[GRF_DPHY_TX1RX1_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON24, 4, 0),
+	[GRF_DPHY_RX1_SRC_SEL] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 4),
+	[GRF_DPHY_TX1RX1_BASEDIR] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 5),
+	[GRF_DPHY_TX1RX1_ENABLECLK] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 6),
+	[GRF_DPHY_TX1RX1_MASTERSLAVEZ] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 7),
+	[GRF_DPHY_RX0_TESTDIN] = PHY_REG(RK3399_GRF_SOC_CON25, 8, 0),
+	[GRF_DPHY_RX0_TESTEN] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 8),
+	[GRF_DPHY_RX0_TESTCLK] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 9),
+	[GRF_DPHY_RX0_TESTCLR] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 10),
+	[GRF_DPHY_RX0_TESTDOUT] = PHY_REG(RK3399_GRF_SOC_STATUS1, 8, 0),
+};
+
+struct rk_dphy_drv_data {
+	const char * const *clks;
+	unsigned int num_clks;
+	const struct hsfreq_range *hsfreq_ranges;
+	unsigned int num_hsfreq_ranges;
+	const struct dphy_reg *regs;
+};
+
+struct rk_dphy {
+	struct device *dev;
+	struct regmap *grf;
+	struct clk_bulk_data *clks;
+
+	const struct rk_dphy_drv_data *drv_data;
+	struct phy_configure_opts_mipi_dphy config;
+
+	u8 hsfreq;
+};
+
+static inline void rk_dphy_write_grf(struct rk_dphy *priv,
+				     unsigned int index, u8 value)
+{
+	const struct dphy_reg *reg = &priv->drv_data->regs[index];
+	/* Update high word */
+	unsigned int val = (value << reg->shift) |
+			   (reg->mask << (reg->shift + 16));
+
+	if (WARN_ON(!reg->offset))
+		return;
+	regmap_write(priv->grf, reg->offset, val);
+}
+
+static void rk_dphy_write(struct rk_dphy *priv, u8 test_code, u8 test_data)
+{
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTDIN, test_code);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTEN, 1);
+	/*
+	 * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
+	 * is latched internally as the current test code. Test data is
+	 * programmed internally by rising edge on TESTCLK.
+	 * This code assumes that TESTCLK is already 1.
+	 */
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLK, 0);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTEN, 0);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTDIN, test_data);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLK, 1);
+}
+
+static void rk_dphy_enable(struct rk_dphy *priv)
+{
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_FORCERXMODE, 0);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_FORCETXSTOPMODE, 0);
+
+	/* Disable lane turn around, which is ignored in receive mode */
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TURNREQUEST, 0);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TURNDISABLE, 0xf);
+
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_ENABLE,
+			  GENMASK(priv->config.lanes - 1, 0));
+
+	/* dphy start */
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLK, 1);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLR, 1);
+	usleep_range(100, 150);
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLR, 0);
+	usleep_range(100, 150);
+
+	/* set clock lane */
+	/* HS hsfreq_range & lane 0  settle bypass */
+	rk_dphy_write(priv, CLOCK_LANE_HS_RX_CONTROL, 0);
+	/* HS RX Control of lane0 */
+	rk_dphy_write(priv, LANE0_HS_RX_CONTROL, priv->hsfreq << 1);
+	/* HS RX Control of lane1 */
+	rk_dphy_write(priv, LANE1_HS_RX_CONTROL, priv->hsfreq << 1);
+	/* HS RX Control of lane2 */
+	rk_dphy_write(priv, LANE2_HS_RX_CONTROL, priv->hsfreq << 1);
+	/* HS RX Control of lane3 */
+	rk_dphy_write(priv, LANE3_HS_RX_CONTROL, priv->hsfreq << 1);
+	/* HS RX Data Lanes Settle State Time Control */
+	rk_dphy_write(priv, LANES_THS_SETTLE_CONTROL,
+		      THS_SETTLE_COUNTER_THRESHOLD);
+
+	/* Normal operation */
+	rk_dphy_write(priv, 0x0, 0);
+}
+
+static int rk_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+	struct rk_dphy *priv = phy_get_drvdata(phy);
+	const struct rk_dphy_drv_data *drv_data = priv->drv_data;
+	struct phy_configure_opts_mipi_dphy *config = &opts->mipi_dphy;
+	unsigned int hsfreq = 0;
+	unsigned int i;
+	u64 data_rate_mbps;
+	int ret;
+
+	/* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
+	ret = phy_mipi_dphy_config_validate(config);
+	if (ret)
+		return ret;
+
+	data_rate_mbps = div_u64(config->hs_clk_rate, 1000 * 1000);
+
+	dev_dbg(priv->dev, "lanes %d - data_rate_mbps %llu\n",
+		config->lanes, data_rate_mbps);
+	for (i = 0; i < drv_data->num_hsfreq_ranges; i++) {
+		if (drv_data->hsfreq_ranges[i].range_h >= data_rate_mbps) {
+			hsfreq = drv_data->hsfreq_ranges[i].cfg_bit;
+			break;
+		}
+	}
+	if (!hsfreq)
+		return -EINVAL;
+
+	priv->hsfreq = hsfreq;
+	priv->config = *config;
+	return 0;
+}
+
+static int rk_dphy_power_on(struct phy *phy)
+{
+	struct rk_dphy *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_bulk_enable(priv->drv_data->num_clks, priv->clks);
+	if (ret)
+		return ret;
+
+	rk_dphy_enable(priv);
+
+	return 0;
+}
+
+static int rk_dphy_power_off(struct phy *phy)
+{
+	struct rk_dphy *priv = phy_get_drvdata(phy);
+
+	rk_dphy_write_grf(priv, GRF_DPHY_RX0_ENABLE, 0);
+	clk_bulk_disable(priv->drv_data->num_clks, priv->clks);
+	return 0;
+}
+
+static int rk_dphy_init(struct phy *phy)
+{
+	struct rk_dphy *priv = phy_get_drvdata(phy);
+
+	return clk_bulk_prepare(priv->drv_data->num_clks, priv->clks);
+}
+
+static int rk_dphy_exit(struct phy *phy)
+{
+	struct rk_dphy *priv = phy_get_drvdata(phy);
+
+	clk_bulk_unprepare(priv->drv_data->num_clks, priv->clks);
+	return 0;
+}
+
+static const struct phy_ops rk_dphy_ops = {
+	.power_on	= rk_dphy_power_on,
+	.power_off	= rk_dphy_power_off,
+	.init		= rk_dphy_init,
+	.exit		= rk_dphy_exit,
+	.configure	= rk_dphy_configure,
+	.owner		= THIS_MODULE,
+};
+
+static const struct rk_dphy_drv_data rk3399_mipidphy_drv_data = {
+	.clks = rk3399_mipidphy_clks,
+	.num_clks = ARRAY_SIZE(rk3399_mipidphy_clks),
+	.hsfreq_ranges = rk3399_mipidphy_hsfreq_ranges,
+	.num_hsfreq_ranges = ARRAY_SIZE(rk3399_mipidphy_hsfreq_ranges),
+	.regs = rk3399_grf_dphy_regs,
+};
+
+static const struct of_device_id rk_dphy_dt_ids[] = {
+	{
+		.compatible = "rockchip,rk3399-mipi-dphy-rx0",
+		.data = &rk3399_mipidphy_drv_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, rk_dphy_dt_ids);
+
+static int rk_dphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct rk_dphy_drv_data *drv_data;
+	struct phy_provider *phy_provider;
+	struct rk_dphy *priv;
+	struct phy *phy;
+	unsigned int i;
+	int ret;
+
+	if (!dev->parent || !dev->parent->of_node)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	priv->grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(priv->grf)) {
+		dev_err(dev, "Can't find GRF syscon\n");
+		return -ENODEV;
+	}
+
+	drv_data = of_device_get_match_data(dev);
+	priv->drv_data = drv_data;
+	priv->clks = devm_kcalloc(&pdev->dev, drv_data->num_clks,
+				  sizeof(*priv->clks), GFP_KERNEL);
+	if (!priv->clks)
+		return -ENOMEM;
+	for (i = 0; i < drv_data->num_clks; i++)
+		priv->clks[i].id = drv_data->clks[i];
+	ret = devm_clk_bulk_get(&pdev->dev, drv_data->num_clks, priv->clks);
+	if (ret)
+		return ret;
+
+	phy = devm_phy_create(dev, np, &rk_dphy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver rk_dphy_driver = {
+	.probe = rk_dphy_probe,
+	.driver = {
+		.name	= "rockchip-mipi-dphy-rx0",
+		.of_match_table = rk_dphy_dt_ids,
+	},
+};
+module_platform_driver(rk_dphy_driver);
+
+MODULE_AUTHOR("Ezequiel Garcia <ezequiel@collabora.com>");
+MODULE_DESCRIPTION("Rockchip MIPI Synopsys DPHY RX0 driver");
+MODULE_LICENSE("Dual MIT/GPL");
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
new file mode 100644
index 0000000000..20023f6eb9
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip emmc PHY driver
+ *
+ * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
+ * Copyright (C) 2016 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+		((val) << (shift) | (mask) << ((shift) + 16))
+
+/* Register definition */
+#define GRF_EMMCPHY_CON0		0x0
+#define GRF_EMMCPHY_CON1		0x4
+#define GRF_EMMCPHY_CON2		0x8
+#define GRF_EMMCPHY_CON3		0xc
+#define GRF_EMMCPHY_CON4		0x10
+#define GRF_EMMCPHY_CON5		0x14
+#define GRF_EMMCPHY_CON6		0x18
+#define GRF_EMMCPHY_STATUS		0x20
+
+#define PHYCTRL_PDB_MASK		0x1
+#define PHYCTRL_PDB_SHIFT		0x0
+#define PHYCTRL_PDB_PWR_ON		0x1
+#define PHYCTRL_PDB_PWR_OFF		0x0
+#define PHYCTRL_ENDLL_MASK		0x1
+#define PHYCTRL_ENDLL_SHIFT		0x1
+#define PHYCTRL_ENDLL_ENABLE		0x1
+#define PHYCTRL_ENDLL_DISABLE		0x0
+#define PHYCTRL_CALDONE_MASK		0x1
+#define PHYCTRL_CALDONE_SHIFT		0x6
+#define PHYCTRL_CALDONE_DONE		0x1
+#define PHYCTRL_CALDONE_GOING		0x0
+#define PHYCTRL_DLLRDY_MASK		0x1
+#define PHYCTRL_DLLRDY_SHIFT		0x5
+#define PHYCTRL_DLLRDY_DONE		0x1
+#define PHYCTRL_DLLRDY_GOING		0x0
+#define PHYCTRL_FREQSEL_200M		0x0
+#define PHYCTRL_FREQSEL_50M		0x1
+#define PHYCTRL_FREQSEL_100M		0x2
+#define PHYCTRL_FREQSEL_150M		0x3
+#define PHYCTRL_FREQSEL_MASK		0x3
+#define PHYCTRL_FREQSEL_SHIFT		0xc
+#define PHYCTRL_DR_MASK			0x7
+#define PHYCTRL_DR_SHIFT		0x4
+#define PHYCTRL_DR_50OHM		0x0
+#define PHYCTRL_DR_33OHM		0x1
+#define PHYCTRL_DR_66OHM		0x2
+#define PHYCTRL_DR_100OHM		0x3
+#define PHYCTRL_DR_40OHM		0x4
+#define PHYCTRL_OTAPDLYENA		0x1
+#define PHYCTRL_OTAPDLYENA_MASK		0x1
+#define PHYCTRL_OTAPDLYENA_SHIFT	0xb
+#define PHYCTRL_OTAPDLYSEL_DEFAULT	0x4
+#define PHYCTRL_OTAPDLYSEL_MAXVALUE	0xf
+#define PHYCTRL_OTAPDLYSEL_MASK		0xf
+#define PHYCTRL_OTAPDLYSEL_SHIFT	0x7
+#define PHYCTRL_REN_STRB_DISABLE	0x0
+#define PHYCTRL_REN_STRB_ENABLE		0x1
+#define PHYCTRL_REN_STRB_MASK		0x1
+#define PHYCTRL_REN_STRB_SHIFT		0x9
+
+#define PHYCTRL_IS_CALDONE(x) \
+	((((x) >> PHYCTRL_CALDONE_SHIFT) & \
+	  PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE)
+#define PHYCTRL_IS_DLLRDY(x) \
+	((((x) >> PHYCTRL_DLLRDY_SHIFT) & \
+	  PHYCTRL_DLLRDY_MASK) == PHYCTRL_DLLRDY_DONE)
+
+struct rockchip_emmc_phy {
+	unsigned int	reg_offset;
+	struct regmap	*reg_base;
+	struct clk	*emmcclk;
+	unsigned int drive_impedance;
+	unsigned int enable_strobe_pulldown;
+	unsigned int output_tapdelay_select;
+};
+
+static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
+{
+	struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+	unsigned int caldone;
+	unsigned int dllrdy;
+	unsigned int freqsel = PHYCTRL_FREQSEL_200M;
+	unsigned long rate;
+	int ret;
+
+	/*
+	 * Keep phyctrl_pdb and phyctrl_endll low to allow
+	 * initialization of CALIO state M/C DFFs
+	 */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+		     HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF,
+				   PHYCTRL_PDB_MASK,
+				   PHYCTRL_PDB_SHIFT));
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+		     HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE,
+				   PHYCTRL_ENDLL_MASK,
+				   PHYCTRL_ENDLL_SHIFT));
+
+	/* Already finish power_off above */
+	if (on_off == PHYCTRL_PDB_PWR_OFF)
+		return 0;
+
+	rate = clk_get_rate(rk_phy->emmcclk);
+
+	if (rate != 0) {
+		unsigned long ideal_rate;
+		unsigned long diff;
+
+		switch (rate) {
+		case 1 ... 74999999:
+			ideal_rate = 50000000;
+			freqsel = PHYCTRL_FREQSEL_50M;
+			break;
+		case 75000000 ... 124999999:
+			ideal_rate = 100000000;
+			freqsel = PHYCTRL_FREQSEL_100M;
+			break;
+		case 125000000 ... 174999999:
+			ideal_rate = 150000000;
+			freqsel = PHYCTRL_FREQSEL_150M;
+			break;
+		default:
+			ideal_rate = 200000000;
+			break;
+		}
+
+		diff = (rate > ideal_rate) ?
+			rate - ideal_rate : ideal_rate - rate;
+
+		/*
+		 * In order for tuning delays to be accurate we need to be
+		 * pretty spot on for the DLL range, so warn if we're too
+		 * far off.  Also warn if we're above the 200 MHz max.  Don't
+		 * warn for really slow rates since we won't be tuning then.
+		 */
+		if ((rate > 50000000 && diff > 15000000) || (rate > 200000000))
+			dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+	}
+
+	/*
+	 * According to the user manual, calpad calibration
+	 * cycle takes more than 2us without the minimal recommended
+	 * value, so we may need a little margin here
+	 */
+	udelay(3);
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+		     HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON,
+				   PHYCTRL_PDB_MASK,
+				   PHYCTRL_PDB_SHIFT));
+
+	/*
+	 * According to the user manual, it asks driver to wait 5us for
+	 * calpad busy trimming. However it is documented that this value is
+	 * PVT(A.K.A process,voltage and temperature) relevant, so some
+	 * failure cases are found which indicates we should be more tolerant
+	 * to calpad busy trimming.
+	 */
+	ret = regmap_read_poll_timeout(rk_phy->reg_base,
+				       rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
+				       caldone, PHYCTRL_IS_CALDONE(caldone),
+				       0, 50);
+	if (ret) {
+		pr_err("%s: caldone failed, ret=%d\n", __func__, ret);
+		return ret;
+	}
+
+	/* Set the frequency of the DLL operation */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+		     HIWORD_UPDATE(freqsel, PHYCTRL_FREQSEL_MASK,
+				   PHYCTRL_FREQSEL_SHIFT));
+
+	/* Turn on the DLL */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+		     HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE,
+				   PHYCTRL_ENDLL_MASK,
+				   PHYCTRL_ENDLL_SHIFT));
+
+	/*
+	 * We turned on the DLL even though the rate was 0 because we the
+	 * clock might be turned on later.  ...but we can't wait for the DLL
+	 * to lock when the rate is 0 because it will never lock with no
+	 * input clock.
+	 *
+	 * Technically we should be checking the lock later when the clock
+	 * is turned on, but for now we won't.
+	 */
+	if (rate == 0)
+		return 0;
+
+	/*
+	 * After enabling analog DLL circuits docs say that we need 10.2 us if
+	 * our source clock is at 50 MHz and that lock time scales linearly
+	 * with clock speed.  If we are powering on the PHY and the card clock
+	 * is super slow (like 100 kHZ) this could take as long as 5.1 ms as
+	 * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+	 * Hopefully we won't be running at 100 kHz, but we should still make
+	 * sure we wait long enough.
+	 *
+	 * NOTE: There appear to be corner cases where the DLL seems to take
+	 * extra long to lock for reasons that aren't understood.  In some
+	 * extreme cases we've seen it take up to over 10ms (!).  We'll be
+	 * generous and give it 50ms.
+	 */
+	ret = regmap_read_poll_timeout(rk_phy->reg_base,
+				       rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
+				       dllrdy, PHYCTRL_IS_DLLRDY(dllrdy),
+				       0, 50 * USEC_PER_MSEC);
+	if (ret) {
+		pr_err("%s: dllrdy failed. ret=%d\n", __func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_emmc_phy_init(struct phy *phy)
+{
+	struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+	int ret = 0;
+
+	/*
+	 * We purposely get the clock here and not in probe to avoid the
+	 * circular dependency problem.  We expect:
+	 * - PHY driver to probe
+	 * - SDHCI driver to start probe
+	 * - SDHCI driver to register it's clock
+	 * - SDHCI driver to get the PHY
+	 * - SDHCI driver to init the PHY
+	 *
+	 * The clock is optional, using clk_get_optional() to get the clock
+	 * and do error processing if the return value != NULL
+	 *
+	 * NOTE: we don't do anything special for EPROBE_DEFER here.  Given the
+	 * above expected use case, EPROBE_DEFER isn't sensible to expect, so
+	 * it's just like any other error.
+	 */
+	rk_phy->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
+	if (IS_ERR(rk_phy->emmcclk)) {
+		ret = PTR_ERR(rk_phy->emmcclk);
+		dev_err(&phy->dev, "Error getting emmcclk: %d\n", ret);
+		rk_phy->emmcclk = NULL;
+	}
+
+	return ret;
+}
+
+static int rockchip_emmc_phy_exit(struct phy *phy)
+{
+	struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+
+	clk_put(rk_phy->emmcclk);
+
+	return 0;
+}
+
+static int rockchip_emmc_phy_power_off(struct phy *phy)
+{
+	/* Power down emmc phy analog blocks */
+	return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_OFF);
+}
+
+static int rockchip_emmc_phy_power_on(struct phy *phy)
+{
+	struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+
+	/* Drive impedance: from DTS */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+		     HIWORD_UPDATE(rk_phy->drive_impedance,
+				   PHYCTRL_DR_MASK,
+				   PHYCTRL_DR_SHIFT));
+
+	/* Output tap delay: enable */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+		     HIWORD_UPDATE(PHYCTRL_OTAPDLYENA,
+				   PHYCTRL_OTAPDLYENA_MASK,
+				   PHYCTRL_OTAPDLYENA_SHIFT));
+
+	/* Output tap delay */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+		     HIWORD_UPDATE(rk_phy->output_tapdelay_select,
+				   PHYCTRL_OTAPDLYSEL_MASK,
+				   PHYCTRL_OTAPDLYSEL_SHIFT));
+
+	/* Internal pull-down for strobe line */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON2,
+		     HIWORD_UPDATE(rk_phy->enable_strobe_pulldown,
+				   PHYCTRL_REN_STRB_MASK,
+				   PHYCTRL_REN_STRB_SHIFT));
+
+	/* Power up emmc phy analog blocks */
+	return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
+}
+
+static const struct phy_ops ops = {
+	.init		= rockchip_emmc_phy_init,
+	.exit		= rockchip_emmc_phy_exit,
+	.power_on	= rockchip_emmc_phy_power_on,
+	.power_off	= rockchip_emmc_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static u32 convert_drive_impedance_ohm(struct platform_device *pdev, u32 dr_ohm)
+{
+	switch (dr_ohm) {
+	case 100:
+		return PHYCTRL_DR_100OHM;
+	case 66:
+		return PHYCTRL_DR_66OHM;
+	case 50:
+		return PHYCTRL_DR_50OHM;
+	case 40:
+		return PHYCTRL_DR_40OHM;
+	case 33:
+		return PHYCTRL_DR_33OHM;
+	}
+
+	dev_warn(&pdev->dev, "Invalid value %u for drive-impedance-ohm.\n",
+		 dr_ohm);
+	return PHYCTRL_DR_50OHM;
+}
+
+static int rockchip_emmc_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_emmc_phy *rk_phy;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct regmap *grf;
+	unsigned int reg_offset;
+	u32 val;
+
+	if (!dev->parent || !dev->parent->of_node)
+		return -ENODEV;
+
+	grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(grf)) {
+		dev_err(dev, "Missing rockchip,grf property\n");
+		return PTR_ERR(grf);
+	}
+
+	rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+	if (!rk_phy)
+		return -ENOMEM;
+
+	if (of_property_read_u32(dev->of_node, "reg", &reg_offset)) {
+		dev_err(dev, "missing reg property in node %pOFn\n",
+			dev->of_node);
+		return -EINVAL;
+	}
+
+	rk_phy->reg_offset = reg_offset;
+	rk_phy->reg_base = grf;
+	rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
+	rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_DISABLE;
+	rk_phy->output_tapdelay_select = PHYCTRL_OTAPDLYSEL_DEFAULT;
+
+	if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
+		rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
+
+	if (of_property_read_bool(dev->of_node, "rockchip,enable-strobe-pulldown"))
+		rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
+
+	if (!of_property_read_u32(dev->of_node, "rockchip,output-tapdelay-select", &val)) {
+		if (val <= PHYCTRL_OTAPDLYSEL_MAXVALUE)
+			rk_phy->output_tapdelay_select = val;
+		else
+			dev_err(dev, "output-tapdelay-select exceeds limit, apply default\n");
+	}
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, rk_phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_emmc_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3399-emmc-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids);
+
+static struct platform_driver rockchip_emmc_driver = {
+	.probe		= rockchip_emmc_phy_probe,
+	.driver		= {
+		.name	= "rockchip-emmc-phy",
+		.of_match_table = rockchip_emmc_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_emmc_driver);
+
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip EMMC PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
new file mode 100644
index 0000000000..98c92d6c48
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip MIPI RX Innosilicon DPHY driver
+ *
+ * Copyright (C) 2021 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* GRF */
+#define RK1808_GRF_PD_VI_CON_OFFSET	0x0430
+
+#define RK3326_GRF_PD_VI_CON_OFFSET	0x0430
+
+#define RK3368_GRF_SOC_CON6_OFFSET	0x0418
+
+#define RK3568_GRF_VI_CON0		0x0340
+#define RK3568_GRF_VI_CON1		0x0344
+
+/* PHY */
+#define CSIDPHY_CTRL_LANE_ENABLE		0x00
+#define CSIDPHY_CTRL_LANE_ENABLE_CK		BIT(6)
+#define CSIDPHY_CTRL_LANE_ENABLE_MASK		GENMASK(5, 2)
+#define CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED	BIT(0)
+
+/* not present on all variants */
+#define CSIDPHY_CTRL_PWRCTL			0x04
+#define CSIDPHY_CTRL_PWRCTL_UNDEFINED		GENMASK(7, 5)
+#define CSIDPHY_CTRL_PWRCTL_SYNCRST		BIT(2)
+#define CSIDPHY_CTRL_PWRCTL_LDO_PD		BIT(1)
+#define CSIDPHY_CTRL_PWRCTL_PLL_PD		BIT(0)
+
+#define CSIDPHY_CTRL_DIG_RST			0x80
+#define CSIDPHY_CTRL_DIG_RST_UNDEFINED		0x1e
+#define CSIDPHY_CTRL_DIG_RST_RESET		BIT(0)
+
+/* offset after ths_settle_offset */
+#define CSIDPHY_CLK_THS_SETTLE			0
+#define CSIDPHY_LANE_THS_SETTLE(n)		(((n) + 1) * 0x80)
+#define CSIDPHY_THS_SETTLE_MASK			GENMASK(6, 0)
+
+/* offset after calib_offset */
+#define CSIDPHY_CLK_CALIB_EN			0
+#define CSIDPHY_LANE_CALIB_EN(n)		(((n) + 1) * 0x80)
+#define CSIDPHY_CALIB_EN			BIT(7)
+
+/* Configure the count time of the THS-SETTLE by protocol. */
+#define RK1808_CSIDPHY_CLK_WR_THS_SETTLE	0x160
+#define RK3326_CSIDPHY_CLK_WR_THS_SETTLE	0x100
+#define RK3368_CSIDPHY_CLK_WR_THS_SETTLE	0x100
+#define RK3568_CSIDPHY_CLK_WR_THS_SETTLE	0x160
+
+/* Calibration reception enable */
+#define RK1808_CSIDPHY_CLK_CALIB_EN		0x168
+#define RK3568_CSIDPHY_CLK_CALIB_EN		0x168
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+		((val) << (shift) | (mask) << ((shift) + 16))
+
+#define HZ_TO_MHZ(freq)				div_u64(freq, 1000 * 1000)
+
+enum dphy_reg_id {
+	/* rk1808 & rk3326 */
+	GRF_DPHY_CSIPHY_FORCERXMODE,
+	GRF_DPHY_CSIPHY_CLKLANE_EN,
+	GRF_DPHY_CSIPHY_DATALANE_EN,
+};
+
+struct dphy_reg {
+	u32 offset;
+	u32 mask;
+	u32 shift;
+};
+
+#define PHY_REG(_offset, _width, _shift) \
+	{ .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
+
+static const struct dphy_reg rk1808_grf_dphy_regs[] = {
+	[GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 0),
+	[GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 1, 8),
+	[GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 4),
+};
+
+static const struct dphy_reg rk3326_grf_dphy_regs[] = {
+	[GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 0),
+	[GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 1, 8),
+	[GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 4),
+};
+
+static const struct dphy_reg rk3368_grf_dphy_regs[] = {
+	[GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3368_GRF_SOC_CON6_OFFSET, 4, 8),
+};
+
+static const struct dphy_reg rk3568_grf_dphy_regs[] = {
+	[GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3568_GRF_VI_CON0, 4, 0),
+	[GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK3568_GRF_VI_CON0, 4, 4),
+	[GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK3568_GRF_VI_CON0, 1, 8),
+};
+
+struct hsfreq_range {
+	u32 range_h;
+	u8 cfg_bit;
+};
+
+struct dphy_drv_data {
+	int pwrctl_offset;
+	int ths_settle_offset;
+	int calib_offset;
+	const struct hsfreq_range *hsfreq_ranges;
+	int num_hsfreq_ranges;
+	const struct dphy_reg *grf_regs;
+};
+
+struct rockchip_inno_csidphy {
+	struct device *dev;
+	void __iomem *phy_base;
+	struct clk *pclk;
+	struct regmap *grf;
+	struct reset_control *rst;
+	const struct dphy_drv_data *drv_data;
+	struct phy_configure_opts_mipi_dphy config;
+	u8 hsfreq;
+};
+
+static inline void write_grf_reg(struct rockchip_inno_csidphy *priv,
+				 int index, u8 value)
+{
+	const struct dphy_drv_data *drv_data = priv->drv_data;
+	const struct dphy_reg *reg = &drv_data->grf_regs[index];
+
+	if (reg->offset)
+		regmap_write(priv->grf, reg->offset,
+			     HIWORD_UPDATE(value, reg->mask, reg->shift));
+}
+
+/* These tables must be sorted by .range_h ascending. */
+static const struct hsfreq_range rk1808_mipidphy_hsfreq_ranges[] = {
+	{ 109, 0x02}, { 149, 0x03}, { 199, 0x06}, { 249, 0x06},
+	{ 299, 0x06}, { 399, 0x08}, { 499, 0x0b}, { 599, 0x0e},
+	{ 699, 0x10}, { 799, 0x12}, { 999, 0x16}, {1199, 0x1e},
+	{1399, 0x23}, {1599, 0x2d}, {1799, 0x32}, {1999, 0x37},
+	{2199, 0x3c}, {2399, 0x41}, {2499, 0x46}
+};
+
+static const struct hsfreq_range rk3326_mipidphy_hsfreq_ranges[] = {
+	{ 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
+	{ 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
+	{ 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
+	{1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
+};
+
+static const struct hsfreq_range rk3368_mipidphy_hsfreq_ranges[] = {
+	{ 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
+	{ 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
+	{ 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
+	{1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
+};
+
+static void rockchip_inno_csidphy_ths_settle(struct rockchip_inno_csidphy *priv,
+					     int hsfreq, int offset)
+{
+	const struct dphy_drv_data *drv_data = priv->drv_data;
+	u32 val;
+
+	val = readl(priv->phy_base + drv_data->ths_settle_offset + offset);
+	val &= ~CSIDPHY_THS_SETTLE_MASK;
+	val |= hsfreq;
+	writel(val, priv->phy_base + drv_data->ths_settle_offset + offset);
+}
+
+static int rockchip_inno_csidphy_configure(struct phy *phy,
+					   union phy_configure_opts *opts)
+{
+	struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+	const struct dphy_drv_data *drv_data = priv->drv_data;
+	struct phy_configure_opts_mipi_dphy *config = &opts->mipi_dphy;
+	unsigned int hsfreq = 0;
+	unsigned int i;
+	u64 data_rate_mbps;
+	int ret;
+
+	/* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
+	ret = phy_mipi_dphy_config_validate(config);
+	if (ret)
+		return ret;
+
+	data_rate_mbps = HZ_TO_MHZ(config->hs_clk_rate);
+
+	dev_dbg(priv->dev, "lanes %d - data_rate_mbps %llu\n",
+		config->lanes, data_rate_mbps);
+	for (i = 0; i < drv_data->num_hsfreq_ranges; i++) {
+		if (drv_data->hsfreq_ranges[i].range_h >= data_rate_mbps) {
+			hsfreq = drv_data->hsfreq_ranges[i].cfg_bit;
+			break;
+		}
+	}
+	if (!hsfreq)
+		return -EINVAL;
+
+	priv->hsfreq = hsfreq;
+	priv->config = *config;
+	return 0;
+}
+
+static int rockchip_inno_csidphy_power_on(struct phy *phy)
+{
+	struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+	const struct dphy_drv_data *drv_data = priv->drv_data;
+	u64 data_rate_mbps = HZ_TO_MHZ(priv->config.hs_clk_rate);
+	u32 val;
+	int ret, i;
+
+	ret = clk_enable(priv->pclk);
+	if (ret < 0)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret < 0) {
+		clk_disable(priv->pclk);
+		return ret;
+	}
+
+	/* phy start */
+	if (drv_data->pwrctl_offset >= 0)
+		writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
+		       CSIDPHY_CTRL_PWRCTL_SYNCRST,
+		       priv->phy_base + drv_data->pwrctl_offset);
+
+	/* set data lane num and enable clock lane */
+	val = FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_MASK, GENMASK(priv->config.lanes - 1, 0)) |
+	      FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_CK, 1) |
+	      FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED, 1);
+	writel(val, priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
+
+	/* Reset dphy analog part */
+	if (drv_data->pwrctl_offset >= 0)
+		writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED,
+		       priv->phy_base + drv_data->pwrctl_offset);
+	usleep_range(500, 1000);
+
+	/* Reset dphy digital part */
+	writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED,
+	       priv->phy_base + CSIDPHY_CTRL_DIG_RST);
+	writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED + CSIDPHY_CTRL_DIG_RST_RESET,
+	       priv->phy_base + CSIDPHY_CTRL_DIG_RST);
+
+	/* not into receive mode/wait stopstate */
+	write_grf_reg(priv, GRF_DPHY_CSIPHY_FORCERXMODE, 0x0);
+
+	/* enable calibration */
+	if (data_rate_mbps > 1500 && drv_data->calib_offset >= 0) {
+		writel(CSIDPHY_CALIB_EN,
+		       priv->phy_base + drv_data->calib_offset +
+					CSIDPHY_CLK_CALIB_EN);
+		for (i = 0; i < priv->config.lanes; i++)
+			writel(CSIDPHY_CALIB_EN,
+			       priv->phy_base + drv_data->calib_offset +
+						CSIDPHY_LANE_CALIB_EN(i));
+	}
+
+	rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
+					 CSIDPHY_CLK_THS_SETTLE);
+	for (i = 0; i < priv->config.lanes; i++)
+		rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
+						 CSIDPHY_LANE_THS_SETTLE(i));
+
+	write_grf_reg(priv, GRF_DPHY_CSIPHY_CLKLANE_EN, 0x1);
+	write_grf_reg(priv, GRF_DPHY_CSIPHY_DATALANE_EN,
+		      GENMASK(priv->config.lanes - 1, 0));
+
+	return 0;
+}
+
+static int rockchip_inno_csidphy_power_off(struct phy *phy)
+{
+	struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+	const struct dphy_drv_data *drv_data = priv->drv_data;
+
+	/* disable all lanes */
+	writel(CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED,
+	       priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
+
+	/* disable pll and ldo */
+	if (drv_data->pwrctl_offset >= 0)
+		writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
+		       CSIDPHY_CTRL_PWRCTL_LDO_PD |
+		       CSIDPHY_CTRL_PWRCTL_PLL_PD,
+		       priv->phy_base + drv_data->pwrctl_offset);
+	usleep_range(500, 1000);
+
+	pm_runtime_put(priv->dev);
+	clk_disable(priv->pclk);
+
+	return 0;
+}
+
+static int rockchip_inno_csidphy_init(struct phy *phy)
+{
+	struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+
+	return clk_prepare(priv->pclk);
+}
+
+static int rockchip_inno_csidphy_exit(struct phy *phy)
+{
+	struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+
+	clk_unprepare(priv->pclk);
+
+	return 0;
+}
+
+static const struct phy_ops rockchip_inno_csidphy_ops = {
+	.power_on	= rockchip_inno_csidphy_power_on,
+	.power_off	= rockchip_inno_csidphy_power_off,
+	.init		= rockchip_inno_csidphy_init,
+	.exit		= rockchip_inno_csidphy_exit,
+	.configure	= rockchip_inno_csidphy_configure,
+	.owner		= THIS_MODULE,
+};
+
+static const struct dphy_drv_data rk1808_mipidphy_drv_data = {
+	.pwrctl_offset = -1,
+	.ths_settle_offset = RK1808_CSIDPHY_CLK_WR_THS_SETTLE,
+	.calib_offset = RK1808_CSIDPHY_CLK_CALIB_EN,
+	.hsfreq_ranges = rk1808_mipidphy_hsfreq_ranges,
+	.num_hsfreq_ranges = ARRAY_SIZE(rk1808_mipidphy_hsfreq_ranges),
+	.grf_regs = rk1808_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3326_mipidphy_drv_data = {
+	.pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
+	.ths_settle_offset = RK3326_CSIDPHY_CLK_WR_THS_SETTLE,
+	.calib_offset = -1,
+	.hsfreq_ranges = rk3326_mipidphy_hsfreq_ranges,
+	.num_hsfreq_ranges = ARRAY_SIZE(rk3326_mipidphy_hsfreq_ranges),
+	.grf_regs = rk3326_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3368_mipidphy_drv_data = {
+	.pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
+	.ths_settle_offset = RK3368_CSIDPHY_CLK_WR_THS_SETTLE,
+	.calib_offset = -1,
+	.hsfreq_ranges = rk3368_mipidphy_hsfreq_ranges,
+	.num_hsfreq_ranges = ARRAY_SIZE(rk3368_mipidphy_hsfreq_ranges),
+	.grf_regs = rk3368_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3568_mipidphy_drv_data = {
+	.pwrctl_offset = -1,
+	.ths_settle_offset = RK3568_CSIDPHY_CLK_WR_THS_SETTLE,
+	.calib_offset = RK3568_CSIDPHY_CLK_CALIB_EN,
+	.hsfreq_ranges = rk1808_mipidphy_hsfreq_ranges,
+	.num_hsfreq_ranges = ARRAY_SIZE(rk1808_mipidphy_hsfreq_ranges),
+	.grf_regs = rk3568_grf_dphy_regs,
+};
+
+static const struct of_device_id rockchip_inno_csidphy_match_id[] = {
+	{
+		.compatible = "rockchip,px30-csi-dphy",
+		.data = &rk3326_mipidphy_drv_data,
+	},
+	{
+		.compatible = "rockchip,rk1808-csi-dphy",
+		.data = &rk1808_mipidphy_drv_data,
+	},
+	{
+		.compatible = "rockchip,rk3326-csi-dphy",
+		.data = &rk3326_mipidphy_drv_data,
+	},
+	{
+		.compatible = "rockchip,rk3368-csi-dphy",
+		.data = &rk3368_mipidphy_drv_data,
+	},
+	{
+		.compatible = "rockchip,rk3568-csi-dphy",
+		.data = &rk3568_mipidphy_drv_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, rockchip_inno_csidphy_match_id);
+
+static int rockchip_inno_csidphy_probe(struct platform_device *pdev)
+{
+	struct rockchip_inno_csidphy *priv;
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct phy *phy;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	priv->drv_data = of_device_get_match_data(dev);
+	if (!priv->drv_data) {
+		dev_err(dev, "Can't find device data\n");
+		return -ENODEV;
+	}
+
+	priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+						    "rockchip,grf");
+	if (IS_ERR(priv->grf)) {
+		dev_err(dev, "Can't find GRF syscon\n");
+		return PTR_ERR(priv->grf);
+	}
+
+	priv->phy_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->phy_base))
+		return PTR_ERR(priv->phy_base);
+
+	priv->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(priv->pclk)) {
+		dev_err(dev, "failed to get pclk\n");
+		return PTR_ERR(priv->pclk);
+	}
+
+	priv->rst = devm_reset_control_get(dev, "apb");
+	if (IS_ERR(priv->rst)) {
+		dev_err(dev, "failed to get system reset control\n");
+		return PTR_ERR(priv->rst);
+	}
+
+	phy = devm_phy_create(dev, NULL, &rockchip_inno_csidphy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "failed to register phy provider\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static void rockchip_inno_csidphy_remove(struct platform_device *pdev)
+{
+	struct rockchip_inno_csidphy *priv = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(priv->dev);
+}
+
+static struct platform_driver rockchip_inno_csidphy_driver = {
+	.driver = {
+		.name = "rockchip-inno-csidphy",
+		.of_match_table = rockchip_inno_csidphy_match_id,
+	},
+	.probe = rockchip_inno_csidphy_probe,
+	.remove_new = rockchip_inno_csidphy_remove,
+};
+
+module_platform_driver(rockchip_inno_csidphy_driver);
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
+MODULE_DESCRIPTION("Rockchip MIPI Innosilicon CSI-DPHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
new file mode 100644
index 0000000000..6405943a26
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Rockchip Electronics Co. Ltd.
+ *
+ * Author: Wyon Bi <bivvy.bi@rock-chips.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/time64.h>
+
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+#define UPDATE(x, h, l)	(((x) << (l)) & GENMASK((h), (l)))
+
+/*
+ * The offset address[7:0] is distributed two parts, one from the bit7 to bit5
+ * is the first address, the other from the bit4 to bit0 is the second address.
+ * when you configure the registers, you must set both of them. The Clock Lane
+ * and Data Lane use the same registers with the same second address, but the
+ * first address is different.
+ */
+#define FIRST_ADDRESS(x)		(((x) & 0x7) << 5)
+#define SECOND_ADDRESS(x)		(((x) & 0x1f) << 0)
+#define PHY_REG(first, second)		(FIRST_ADDRESS(first) | \
+					 SECOND_ADDRESS(second))
+
+/* Analog Register Part: reg00 */
+#define BANDGAP_POWER_MASK			BIT(7)
+#define BANDGAP_POWER_DOWN			BIT(7)
+#define BANDGAP_POWER_ON			0
+#define LANE_EN_MASK				GENMASK(6, 2)
+#define LANE_EN_CK				BIT(6)
+#define LANE_EN_3				BIT(5)
+#define LANE_EN_2				BIT(4)
+#define LANE_EN_1				BIT(3)
+#define LANE_EN_0				BIT(2)
+#define POWER_WORK_MASK				GENMASK(1, 0)
+#define POWER_WORK_ENABLE			UPDATE(1, 1, 0)
+#define POWER_WORK_DISABLE			UPDATE(2, 1, 0)
+/* Analog Register Part: reg01 */
+#define REG_SYNCRST_MASK			BIT(2)
+#define REG_SYNCRST_RESET			BIT(2)
+#define REG_SYNCRST_NORMAL			0
+#define REG_LDOPD_MASK				BIT(1)
+#define REG_LDOPD_POWER_DOWN			BIT(1)
+#define REG_LDOPD_POWER_ON			0
+#define REG_PLLPD_MASK				BIT(0)
+#define REG_PLLPD_POWER_DOWN			BIT(0)
+#define REG_PLLPD_POWER_ON			0
+/* Analog Register Part: reg03 */
+#define REG_FBDIV_HI_MASK			BIT(5)
+#define REG_FBDIV_HI(x)				UPDATE((x >> 8), 5, 5)
+#define REG_PREDIV_MASK				GENMASK(4, 0)
+#define REG_PREDIV(x)				UPDATE(x, 4, 0)
+/* Analog Register Part: reg04 */
+#define REG_FBDIV_LO_MASK			GENMASK(7, 0)
+#define REG_FBDIV_LO(x)				UPDATE(x, 7, 0)
+/* Analog Register Part: reg05 */
+#define SAMPLE_CLOCK_PHASE_MASK			GENMASK(6, 4)
+#define SAMPLE_CLOCK_PHASE(x)			UPDATE(x, 6, 4)
+#define CLOCK_LANE_SKEW_PHASE_MASK		GENMASK(2, 0)
+#define CLOCK_LANE_SKEW_PHASE(x)		UPDATE(x, 2, 0)
+/* Analog Register Part: reg06 */
+#define DATA_LANE_3_SKEW_PHASE_MASK		GENMASK(6, 4)
+#define DATA_LANE_3_SKEW_PHASE(x)		UPDATE(x, 6, 4)
+#define DATA_LANE_2_SKEW_PHASE_MASK		GENMASK(2, 0)
+#define DATA_LANE_2_SKEW_PHASE(x)		UPDATE(x, 2, 0)
+/* Analog Register Part: reg07 */
+#define DATA_LANE_1_SKEW_PHASE_MASK		GENMASK(6, 4)
+#define DATA_LANE_1_SKEW_PHASE(x)		UPDATE(x, 6, 4)
+#define DATA_LANE_0_SKEW_PHASE_MASK		GENMASK(2, 0)
+#define DATA_LANE_0_SKEW_PHASE(x)		UPDATE(x, 2, 0)
+/* Analog Register Part: reg08 */
+#define PLL_POST_DIV_ENABLE_MASK		BIT(5)
+#define PLL_POST_DIV_ENABLE			BIT(5)
+#define SAMPLE_CLOCK_DIRECTION_MASK		BIT(4)
+#define SAMPLE_CLOCK_DIRECTION_REVERSE		BIT(4)
+#define SAMPLE_CLOCK_DIRECTION_FORWARD		0
+#define LOWFRE_EN_MASK				BIT(5)
+#define PLL_OUTPUT_FREQUENCY_DIV_BY_1		0
+#define PLL_OUTPUT_FREQUENCY_DIV_BY_2		1
+/* Analog Register Part: reg0b */
+#define CLOCK_LANE_VOD_RANGE_SET_MASK		GENMASK(3, 0)
+#define CLOCK_LANE_VOD_RANGE_SET(x)		UPDATE(x, 3, 0)
+#define VOD_MIN_RANGE				0x1
+#define VOD_MID_RANGE				0x3
+#define VOD_BIG_RANGE				0x7
+#define VOD_MAX_RANGE				0xf
+/* Analog Register Part: reg1E */
+#define PLL_MODE_SEL_MASK			GENMASK(6, 5)
+#define PLL_MODE_SEL_LVDS_MODE			0
+#define PLL_MODE_SEL_MIPI_MODE			BIT(5)
+/* Digital Register Part: reg00 */
+#define REG_DIG_RSTN_MASK			BIT(0)
+#define REG_DIG_RSTN_NORMAL			BIT(0)
+#define REG_DIG_RSTN_RESET			0
+/* Digital Register Part: reg01 */
+#define INVERT_TXCLKESC_MASK			BIT(1)
+#define INVERT_TXCLKESC_ENABLE			BIT(1)
+#define INVERT_TXCLKESC_DISABLE			0
+#define INVERT_TXBYTECLKHS_MASK			BIT(0)
+#define INVERT_TXBYTECLKHS_ENABLE		BIT(0)
+#define INVERT_TXBYTECLKHS_DISABLE		0
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg05 */
+#define T_LPX_CNT_MASK				GENMASK(5, 0)
+#define T_LPX_CNT(x)				UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg06 */
+#define T_HS_ZERO_CNT_HI_MASK			BIT(7)
+#define T_HS_ZERO_CNT_HI(x)			UPDATE(x, 7, 7)
+#define T_HS_PREPARE_CNT_MASK			GENMASK(6, 0)
+#define T_HS_PREPARE_CNT(x)			UPDATE(x, 6, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg07 */
+#define T_HS_ZERO_CNT_LO_MASK			GENMASK(5, 0)
+#define T_HS_ZERO_CNT_LO(x)			UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg08 */
+#define T_HS_TRAIL_CNT_MASK			GENMASK(6, 0)
+#define T_HS_TRAIL_CNT(x)			UPDATE(x, 6, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg09 */
+#define T_HS_EXIT_CNT_LO_MASK			GENMASK(4, 0)
+#define T_HS_EXIT_CNT_LO(x)			UPDATE(x, 4, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0a */
+#define T_CLK_POST_CNT_LO_MASK			GENMASK(3, 0)
+#define T_CLK_POST_CNT_LO(x)			UPDATE(x, 3, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0c */
+#define LPDT_TX_PPI_SYNC_MASK			BIT(2)
+#define LPDT_TX_PPI_SYNC_ENABLE			BIT(2)
+#define LPDT_TX_PPI_SYNC_DISABLE		0
+#define T_WAKEUP_CNT_HI_MASK			GENMASK(1, 0)
+#define T_WAKEUP_CNT_HI(x)			UPDATE(x, 1, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0d */
+#define T_WAKEUP_CNT_LO_MASK			GENMASK(7, 0)
+#define T_WAKEUP_CNT_LO(x)			UPDATE(x, 7, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0e */
+#define T_CLK_PRE_CNT_MASK			GENMASK(3, 0)
+#define T_CLK_PRE_CNT(x)			UPDATE(x, 3, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg10 */
+#define T_CLK_POST_CNT_HI_MASK			GENMASK(7, 6)
+#define T_CLK_POST_CNT_HI(x)			UPDATE(x, 7, 6)
+#define T_TA_GO_CNT_MASK			GENMASK(5, 0)
+#define T_TA_GO_CNT(x)				UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg11 */
+#define T_HS_EXIT_CNT_HI_MASK			BIT(6)
+#define T_HS_EXIT_CNT_HI(x)			UPDATE(x, 6, 6)
+#define T_TA_SURE_CNT_MASK			GENMASK(5, 0)
+#define T_TA_SURE_CNT(x)			UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg12 */
+#define T_TA_WAIT_CNT_MASK			GENMASK(5, 0)
+#define T_TA_WAIT_CNT(x)			UPDATE(x, 5, 0)
+/* LVDS Register Part: reg00 */
+#define LVDS_DIGITAL_INTERNAL_RESET_MASK	BIT(2)
+#define LVDS_DIGITAL_INTERNAL_RESET_DISABLE	BIT(2)
+#define LVDS_DIGITAL_INTERNAL_RESET_ENABLE	0
+/* LVDS Register Part: reg01 */
+#define LVDS_DIGITAL_INTERNAL_ENABLE_MASK	BIT(7)
+#define LVDS_DIGITAL_INTERNAL_ENABLE		BIT(7)
+#define LVDS_DIGITAL_INTERNAL_DISABLE		0
+/* LVDS Register Part: reg03 */
+#define MODE_ENABLE_MASK			GENMASK(2, 0)
+#define TTL_MODE_ENABLE				BIT(2)
+#define LVDS_MODE_ENABLE			BIT(1)
+#define MIPI_MODE_ENABLE			BIT(0)
+/* LVDS Register Part: reg0b */
+#define LVDS_LANE_EN_MASK			GENMASK(7, 3)
+#define LVDS_DATA_LANE0_EN			BIT(7)
+#define LVDS_DATA_LANE1_EN			BIT(6)
+#define LVDS_DATA_LANE2_EN			BIT(5)
+#define LVDS_DATA_LANE3_EN			BIT(4)
+#define LVDS_CLK_LANE_EN			BIT(3)
+#define LVDS_PLL_POWER_MASK			BIT(2)
+#define LVDS_PLL_POWER_OFF			BIT(2)
+#define LVDS_PLL_POWER_ON			0
+#define LVDS_BANDGAP_POWER_MASK			BIT(0)
+#define LVDS_BANDGAP_POWER_DOWN			BIT(0)
+#define LVDS_BANDGAP_POWER_ON			0
+
+#define DSI_PHY_RSTZ		0xa0
+#define PHY_ENABLECLK		BIT(2)
+#define DSI_PHY_STATUS		0xb0
+#define PHY_LOCK		BIT(0)
+
+enum phy_max_rate {
+	MAX_1GHZ,
+	MAX_2_5GHZ,
+};
+
+struct inno_video_phy_plat_data {
+	const struct inno_mipi_dphy_timing *inno_mipi_dphy_timing_table;
+	const unsigned int num_timings;
+	enum phy_max_rate max_rate;
+};
+
+struct inno_dsidphy {
+	struct device *dev;
+	struct clk *ref_clk;
+	struct clk *pclk_phy;
+	struct clk *pclk_host;
+	const struct inno_video_phy_plat_data *pdata;
+	void __iomem *phy_base;
+	void __iomem *host_base;
+	struct reset_control *rst;
+	enum phy_mode mode;
+	struct phy_configure_opts_mipi_dphy dphy_cfg;
+
+	struct clk *pll_clk;
+	struct {
+		struct clk_hw hw;
+		u8 prediv;
+		u16 fbdiv;
+		unsigned long rate;
+	} pll;
+};
+
+enum {
+	REGISTER_PART_ANALOG,
+	REGISTER_PART_DIGITAL,
+	REGISTER_PART_CLOCK_LANE,
+	REGISTER_PART_DATA0_LANE,
+	REGISTER_PART_DATA1_LANE,
+	REGISTER_PART_DATA2_LANE,
+	REGISTER_PART_DATA3_LANE,
+	REGISTER_PART_LVDS,
+};
+
+struct inno_mipi_dphy_timing {
+	unsigned long rate;
+	u8 lpx;
+	u8 hs_prepare;
+	u8 clk_lane_hs_zero;
+	u8 data_lane_hs_zero;
+	u8 hs_trail;
+};
+
+static const
+struct inno_mipi_dphy_timing inno_mipi_dphy_timing_table_max_1ghz[] = {
+	{ 110000000, 0x0, 0x20, 0x16, 0x02, 0x22},
+	{ 150000000, 0x0, 0x06, 0x16, 0x03, 0x45},
+	{ 200000000, 0x0, 0x18, 0x17, 0x04, 0x0b},
+	{ 250000000, 0x0, 0x05, 0x17, 0x05, 0x16},
+	{ 300000000, 0x0, 0x51, 0x18, 0x06, 0x2c},
+	{ 400000000, 0x0, 0x64, 0x19, 0x07, 0x33},
+	{ 500000000, 0x0, 0x20, 0x1b, 0x07, 0x4e},
+	{ 600000000, 0x0, 0x6a, 0x1d, 0x08, 0x3a},
+	{ 700000000, 0x0, 0x3e, 0x1e, 0x08, 0x6a},
+	{ 800000000, 0x0, 0x21, 0x1f, 0x09, 0x29},
+	{1000000000, 0x0, 0x09, 0x20, 0x09, 0x27},
+};
+
+static const
+struct inno_mipi_dphy_timing inno_mipi_dphy_timing_table_max_2_5ghz[] = {
+	{ 110000000, 0x02, 0x7f, 0x16, 0x02, 0x02},
+	{ 150000000, 0x02, 0x7f, 0x16, 0x03, 0x02},
+	{ 200000000, 0x02, 0x7f, 0x17, 0x04, 0x02},
+	{ 250000000, 0x02, 0x7f, 0x17, 0x05, 0x04},
+	{ 300000000, 0x02, 0x7f, 0x18, 0x06, 0x04},
+	{ 400000000, 0x03, 0x7e, 0x19, 0x07, 0x04},
+	{ 500000000, 0x03, 0x7c, 0x1b, 0x07, 0x08},
+	{ 600000000, 0x03, 0x70, 0x1d, 0x08, 0x10},
+	{ 700000000, 0x05, 0x40, 0x1e, 0x08, 0x30},
+	{ 800000000, 0x05, 0x02, 0x1f, 0x09, 0x30},
+	{1000000000, 0x05, 0x08, 0x20, 0x09, 0x30},
+	{1200000000, 0x06, 0x03, 0x32, 0x14, 0x0f},
+	{1400000000, 0x09, 0x03, 0x32, 0x14, 0x0f},
+	{1600000000, 0x0d, 0x42, 0x36, 0x0e, 0x0f},
+	{1800000000, 0x0e, 0x47, 0x7a, 0x0e, 0x0f},
+	{2000000000, 0x11, 0x64, 0x7a, 0x0e, 0x0b},
+	{2200000000, 0x13, 0x64, 0x7e, 0x15, 0x0b},
+	{2400000000, 0x13, 0x33, 0x7f, 0x15, 0x6a},
+	{2500000000, 0x15, 0x54, 0x7f, 0x15, 0x6a},
+};
+
+static void phy_update_bits(struct inno_dsidphy *inno,
+			    u8 first, u8 second, u8 mask, u8 val)
+{
+	u32 reg = PHY_REG(first, second) << 2;
+	unsigned int tmp, orig;
+
+	orig = readl(inno->phy_base + reg);
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+	writel(tmp, inno->phy_base + reg);
+}
+
+static unsigned long inno_dsidphy_pll_calc_rate(struct inno_dsidphy *inno,
+						unsigned long rate)
+{
+	unsigned long prate = clk_get_rate(inno->ref_clk);
+	unsigned long best_freq = 0;
+	unsigned long fref, fout;
+	u8 min_prediv, max_prediv;
+	u8 _prediv, best_prediv = 1;
+	u16 _fbdiv, best_fbdiv = 1;
+	u32 min_delta = UINT_MAX;
+
+	/*
+	 * The PLL output frequency can be calculated using a simple formula:
+	 * PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2
+	 * PLL_Output_Frequency: it is equal to DDR-Clock-Frequency * 2
+	 */
+	fref = prate / 2;
+	if (rate > 1000000000UL)
+		fout = 1000000000UL;
+	else
+		fout = rate;
+
+	/* 5Mhz < Fref / prediv < 40MHz */
+	min_prediv = DIV_ROUND_UP(fref, 40000000);
+	max_prediv = fref / 5000000;
+
+	for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) {
+		u64 tmp;
+		u32 delta;
+
+		tmp = (u64)fout * _prediv;
+		do_div(tmp, fref);
+		_fbdiv = tmp;
+
+		/*
+		 * The possible settings of feedback divider are
+		 * 12, 13, 14, 16, ~ 511
+		 */
+		if (_fbdiv == 15)
+			continue;
+
+		if (_fbdiv < 12 || _fbdiv > 511)
+			continue;
+
+		tmp = (u64)_fbdiv * fref;
+		do_div(tmp, _prediv);
+
+		delta = abs(fout - tmp);
+		if (!delta) {
+			best_prediv = _prediv;
+			best_fbdiv = _fbdiv;
+			best_freq = tmp;
+			break;
+		} else if (delta < min_delta) {
+			best_prediv = _prediv;
+			best_fbdiv = _fbdiv;
+			best_freq = tmp;
+			min_delta = delta;
+		}
+	}
+
+	if (best_freq) {
+		inno->pll.prediv = best_prediv;
+		inno->pll.fbdiv = best_fbdiv;
+		inno->pll.rate = best_freq;
+	}
+
+	return best_freq;
+}
+
+static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno)
+{
+	struct phy_configure_opts_mipi_dphy *cfg = &inno->dphy_cfg;
+	const struct inno_mipi_dphy_timing *timings;
+	u32 t_txbyteclkhs, t_txclkesc;
+	u32 txbyteclkhs, txclkesc, esc_clk_div;
+	u32 hs_exit, clk_post, clk_pre, wakeup, lpx, ta_go, ta_sure, ta_wait;
+	u32 hs_prepare, hs_trail, hs_zero, clk_lane_hs_zero, data_lane_hs_zero;
+	unsigned int i;
+
+	timings = inno->pdata->inno_mipi_dphy_timing_table;
+
+	inno_dsidphy_pll_calc_rate(inno, cfg->hs_clk_rate);
+
+	/* Select MIPI mode */
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x03,
+			MODE_ENABLE_MASK, MIPI_MODE_ENABLE);
+	/* Configure PLL */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+			REG_PREDIV_MASK, REG_PREDIV(inno->pll.prediv));
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+			REG_FBDIV_HI_MASK, REG_FBDIV_HI(inno->pll.fbdiv));
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x04,
+			REG_FBDIV_LO_MASK, REG_FBDIV_LO(inno->pll.fbdiv));
+	if (inno->pdata->max_rate == MAX_2_5GHZ) {
+		phy_update_bits(inno, REGISTER_PART_ANALOG, 0x08,
+				PLL_POST_DIV_ENABLE_MASK, PLL_POST_DIV_ENABLE);
+		phy_update_bits(inno, REGISTER_PART_ANALOG, 0x0b,
+				CLOCK_LANE_VOD_RANGE_SET_MASK,
+				CLOCK_LANE_VOD_RANGE_SET(VOD_MAX_RANGE));
+	}
+	/* Enable PLL and LDO */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+			REG_LDOPD_MASK | REG_PLLPD_MASK,
+			REG_LDOPD_POWER_ON | REG_PLLPD_POWER_ON);
+	/* Reset analog */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+			REG_SYNCRST_MASK, REG_SYNCRST_RESET);
+	udelay(1);
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+			REG_SYNCRST_MASK, REG_SYNCRST_NORMAL);
+	/* Reset digital */
+	phy_update_bits(inno, REGISTER_PART_DIGITAL, 0x00,
+			REG_DIG_RSTN_MASK, REG_DIG_RSTN_RESET);
+	udelay(1);
+	phy_update_bits(inno, REGISTER_PART_DIGITAL, 0x00,
+			REG_DIG_RSTN_MASK, REG_DIG_RSTN_NORMAL);
+
+	txbyteclkhs = inno->pll.rate / 8;
+	t_txbyteclkhs = div_u64(PSEC_PER_SEC, txbyteclkhs);
+
+	esc_clk_div = DIV_ROUND_UP(txbyteclkhs, 20000000);
+	txclkesc = txbyteclkhs / esc_clk_div;
+	t_txclkesc = div_u64(PSEC_PER_SEC, txclkesc);
+
+	/*
+	 * The value of counter for HS Ths-exit
+	 * Ths-exit = Tpin_txbyteclkhs * value
+	 */
+	hs_exit = DIV_ROUND_UP(cfg->hs_exit, t_txbyteclkhs);
+	/*
+	 * The value of counter for HS Tclk-post
+	 * Tclk-post = Tpin_txbyteclkhs * value
+	 */
+	clk_post = DIV_ROUND_UP(cfg->clk_post, t_txbyteclkhs);
+	/*
+	 * The value of counter for HS Tclk-pre
+	 * Tclk-pre = Tpin_txbyteclkhs * value
+	 */
+	clk_pre = DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE);
+
+	/*
+	 * The value of counter for HS Tta-go
+	 * Tta-go for turnaround
+	 * Tta-go = Ttxclkesc * value
+	 */
+	ta_go = DIV_ROUND_UP(cfg->ta_go, t_txclkesc);
+	/*
+	 * The value of counter for HS Tta-sure
+	 * Tta-sure for turnaround
+	 * Tta-sure = Ttxclkesc * value
+	 */
+	ta_sure = DIV_ROUND_UP(cfg->ta_sure, t_txclkesc);
+	/*
+	 * The value of counter for HS Tta-wait
+	 * Tta-wait for turnaround
+	 * Tta-wait = Ttxclkesc * value
+	 */
+	ta_wait = DIV_ROUND_UP(cfg->ta_get, t_txclkesc);
+
+	for (i = 0; i < inno->pdata->num_timings; i++)
+		if (inno->pll.rate <= timings[i].rate)
+			break;
+
+	if (i == inno->pdata->num_timings)
+		--i;
+
+	/*
+	 * The value of counter for HS Tlpx Time
+	 * Tlpx = Tpin_txbyteclkhs * (2 + value)
+	 */
+	if (inno->pdata->max_rate == MAX_1GHZ) {
+		lpx = DIV_ROUND_UP(cfg->lpx, t_txbyteclkhs);
+		if (lpx >= 2)
+			lpx -= 2;
+	} else
+		lpx = timings[i].lpx;
+
+	hs_prepare = timings[i].hs_prepare;
+	hs_trail = timings[i].hs_trail;
+	clk_lane_hs_zero = timings[i].clk_lane_hs_zero;
+	data_lane_hs_zero = timings[i].data_lane_hs_zero;
+	wakeup = 0x3ff;
+
+	for (i = REGISTER_PART_CLOCK_LANE; i <= REGISTER_PART_DATA3_LANE; i++) {
+		if (i == REGISTER_PART_CLOCK_LANE)
+			hs_zero = clk_lane_hs_zero;
+		else
+			hs_zero = data_lane_hs_zero;
+
+		phy_update_bits(inno, i, 0x05, T_LPX_CNT_MASK,
+				T_LPX_CNT(lpx));
+		phy_update_bits(inno, i, 0x06, T_HS_PREPARE_CNT_MASK,
+				T_HS_PREPARE_CNT(hs_prepare));
+		if (inno->pdata->max_rate == MAX_2_5GHZ)
+			phy_update_bits(inno, i, 0x06, T_HS_ZERO_CNT_HI_MASK,
+					T_HS_ZERO_CNT_HI(hs_zero >> 6));
+		phy_update_bits(inno, i, 0x07, T_HS_ZERO_CNT_LO_MASK,
+				T_HS_ZERO_CNT_LO(hs_zero));
+		phy_update_bits(inno, i, 0x08, T_HS_TRAIL_CNT_MASK,
+				T_HS_TRAIL_CNT(hs_trail));
+		if (inno->pdata->max_rate == MAX_2_5GHZ)
+			phy_update_bits(inno, i, 0x11, T_HS_EXIT_CNT_HI_MASK,
+					T_HS_EXIT_CNT_HI(hs_exit >> 5));
+		phy_update_bits(inno, i, 0x09, T_HS_EXIT_CNT_LO_MASK,
+				T_HS_EXIT_CNT_LO(hs_exit));
+		if (inno->pdata->max_rate == MAX_2_5GHZ)
+			phy_update_bits(inno, i, 0x10, T_CLK_POST_CNT_HI_MASK,
+					T_CLK_POST_CNT_HI(clk_post >> 4));
+		phy_update_bits(inno, i, 0x0a, T_CLK_POST_CNT_LO_MASK,
+				T_CLK_POST_CNT_LO(clk_post));
+		phy_update_bits(inno, i, 0x0e, T_CLK_PRE_CNT_MASK,
+				T_CLK_PRE_CNT(clk_pre));
+		phy_update_bits(inno, i, 0x0c, T_WAKEUP_CNT_HI_MASK,
+				T_WAKEUP_CNT_HI(wakeup >> 8));
+		phy_update_bits(inno, i, 0x0d, T_WAKEUP_CNT_LO_MASK,
+				T_WAKEUP_CNT_LO(wakeup));
+		phy_update_bits(inno, i, 0x10, T_TA_GO_CNT_MASK,
+				T_TA_GO_CNT(ta_go));
+		phy_update_bits(inno, i, 0x11, T_TA_SURE_CNT_MASK,
+				T_TA_SURE_CNT(ta_sure));
+		phy_update_bits(inno, i, 0x12, T_TA_WAIT_CNT_MASK,
+				T_TA_WAIT_CNT(ta_wait));
+	}
+
+	/* Enable all lanes on analog part */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+			LANE_EN_MASK, LANE_EN_CK | LANE_EN_3 | LANE_EN_2 |
+			LANE_EN_1 | LANE_EN_0);
+}
+
+static void inno_dsidphy_lvds_mode_enable(struct inno_dsidphy *inno)
+{
+	u8 prediv = 2;
+	u16 fbdiv = 28;
+
+	/* Sample clock reverse direction */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x08,
+			SAMPLE_CLOCK_DIRECTION_MASK | LOWFRE_EN_MASK,
+			SAMPLE_CLOCK_DIRECTION_REVERSE |
+			PLL_OUTPUT_FREQUENCY_DIV_BY_1);
+
+	/* Select LVDS mode */
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x03,
+			MODE_ENABLE_MASK, LVDS_MODE_ENABLE);
+	/* Configure PLL */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+			REG_PREDIV_MASK, REG_PREDIV(prediv));
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+			REG_FBDIV_HI_MASK, REG_FBDIV_HI(fbdiv));
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x04,
+			REG_FBDIV_LO_MASK, REG_FBDIV_LO(fbdiv));
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x08, 0xff, 0xfc);
+	/* Enable PLL and Bandgap */
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b,
+			LVDS_PLL_POWER_MASK | LVDS_BANDGAP_POWER_MASK,
+			LVDS_PLL_POWER_ON | LVDS_BANDGAP_POWER_ON);
+
+	msleep(20);
+
+	/* Select PLL mode */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x1e,
+			PLL_MODE_SEL_MASK, PLL_MODE_SEL_LVDS_MODE);
+
+	/* Reset LVDS digital logic */
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x00,
+			LVDS_DIGITAL_INTERNAL_RESET_MASK,
+			LVDS_DIGITAL_INTERNAL_RESET_ENABLE);
+	udelay(1);
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x00,
+			LVDS_DIGITAL_INTERNAL_RESET_MASK,
+			LVDS_DIGITAL_INTERNAL_RESET_DISABLE);
+	/* Enable LVDS digital logic */
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x01,
+			LVDS_DIGITAL_INTERNAL_ENABLE_MASK,
+			LVDS_DIGITAL_INTERNAL_ENABLE);
+	/* Enable LVDS analog driver */
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b,
+			LVDS_LANE_EN_MASK, LVDS_CLK_LANE_EN |
+			LVDS_DATA_LANE0_EN | LVDS_DATA_LANE1_EN |
+			LVDS_DATA_LANE2_EN | LVDS_DATA_LANE3_EN);
+}
+
+static int inno_dsidphy_power_on(struct phy *phy)
+{
+	struct inno_dsidphy *inno = phy_get_drvdata(phy);
+
+	clk_prepare_enable(inno->pclk_phy);
+	clk_prepare_enable(inno->ref_clk);
+	pm_runtime_get_sync(inno->dev);
+
+	/* Bandgap power on */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+			BANDGAP_POWER_MASK, BANDGAP_POWER_ON);
+	/* Enable power work */
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+			POWER_WORK_MASK, POWER_WORK_ENABLE);
+
+	switch (inno->mode) {
+	case PHY_MODE_MIPI_DPHY:
+		inno_dsidphy_mipi_mode_enable(inno);
+		break;
+	case PHY_MODE_LVDS:
+		inno_dsidphy_lvds_mode_enable(inno);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int inno_dsidphy_power_off(struct phy *phy)
+{
+	struct inno_dsidphy *inno = phy_get_drvdata(phy);
+
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00, LANE_EN_MASK, 0);
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+			REG_LDOPD_MASK | REG_PLLPD_MASK,
+			REG_LDOPD_POWER_DOWN | REG_PLLPD_POWER_DOWN);
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+			POWER_WORK_MASK, POWER_WORK_DISABLE);
+	phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+			BANDGAP_POWER_MASK, BANDGAP_POWER_DOWN);
+
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b, LVDS_LANE_EN_MASK, 0);
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x01,
+			LVDS_DIGITAL_INTERNAL_ENABLE_MASK,
+			LVDS_DIGITAL_INTERNAL_DISABLE);
+	phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b,
+			LVDS_PLL_POWER_MASK | LVDS_BANDGAP_POWER_MASK,
+			LVDS_PLL_POWER_OFF | LVDS_BANDGAP_POWER_DOWN);
+
+	pm_runtime_put(inno->dev);
+	clk_disable_unprepare(inno->ref_clk);
+	clk_disable_unprepare(inno->pclk_phy);
+
+	return 0;
+}
+
+static int inno_dsidphy_set_mode(struct phy *phy, enum phy_mode mode,
+				   int submode)
+{
+	struct inno_dsidphy *inno = phy_get_drvdata(phy);
+
+	switch (mode) {
+	case PHY_MODE_MIPI_DPHY:
+	case PHY_MODE_LVDS:
+		inno->mode = mode;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int inno_dsidphy_configure(struct phy *phy,
+				  union phy_configure_opts *opts)
+{
+	struct inno_dsidphy *inno = phy_get_drvdata(phy);
+	int ret;
+
+	if (inno->mode != PHY_MODE_MIPI_DPHY)
+		return -EINVAL;
+
+	ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+	if (ret)
+		return ret;
+
+	memcpy(&inno->dphy_cfg, &opts->mipi_dphy, sizeof(inno->dphy_cfg));
+
+	return 0;
+}
+
+static const struct phy_ops inno_dsidphy_ops = {
+	.configure = inno_dsidphy_configure,
+	.set_mode = inno_dsidphy_set_mode,
+	.power_on = inno_dsidphy_power_on,
+	.power_off = inno_dsidphy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static const struct inno_video_phy_plat_data max_1ghz_video_phy_plat_data = {
+	.inno_mipi_dphy_timing_table = inno_mipi_dphy_timing_table_max_1ghz,
+	.num_timings = ARRAY_SIZE(inno_mipi_dphy_timing_table_max_1ghz),
+	.max_rate = MAX_1GHZ,
+};
+
+static const struct inno_video_phy_plat_data max_2_5ghz_video_phy_plat_data = {
+	.inno_mipi_dphy_timing_table = inno_mipi_dphy_timing_table_max_2_5ghz,
+	.num_timings = ARRAY_SIZE(inno_mipi_dphy_timing_table_max_2_5ghz),
+	.max_rate = MAX_2_5GHZ,
+};
+
+static int inno_dsidphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct inno_dsidphy *inno;
+	struct phy_provider *phy_provider;
+	struct phy *phy;
+	int ret;
+
+	inno = devm_kzalloc(dev, sizeof(*inno), GFP_KERNEL);
+	if (!inno)
+		return -ENOMEM;
+
+	inno->dev = dev;
+	inno->pdata = of_device_get_match_data(inno->dev);
+	platform_set_drvdata(pdev, inno);
+
+	inno->phy_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(inno->phy_base))
+		return PTR_ERR(inno->phy_base);
+
+	inno->ref_clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(inno->ref_clk)) {
+		ret = PTR_ERR(inno->ref_clk);
+		dev_err(dev, "failed to get ref clock: %d\n", ret);
+		return ret;
+	}
+
+	inno->pclk_phy = devm_clk_get(dev, "pclk");
+	if (IS_ERR(inno->pclk_phy)) {
+		ret = PTR_ERR(inno->pclk_phy);
+		dev_err(dev, "failed to get phy pclk: %d\n", ret);
+		return ret;
+	}
+
+	inno->rst = devm_reset_control_get(dev, "apb");
+	if (IS_ERR(inno->rst)) {
+		ret = PTR_ERR(inno->rst);
+		dev_err(dev, "failed to get system reset control: %d\n", ret);
+		return ret;
+	}
+
+	phy = devm_phy_create(dev, NULL, &inno_dsidphy_ops);
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		dev_err(dev, "failed to create phy: %d\n", ret);
+		return ret;
+	}
+
+	phy_set_drvdata(phy, inno);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		ret = PTR_ERR(phy_provider);
+		dev_err(dev, "failed to register phy provider: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static void inno_dsidphy_remove(struct platform_device *pdev)
+{
+	struct inno_dsidphy *inno = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(inno->dev);
+}
+
+static const struct of_device_id inno_dsidphy_of_match[] = {
+	{
+		.compatible = "rockchip,px30-dsi-dphy",
+		.data = &max_1ghz_video_phy_plat_data,
+	}, {
+		.compatible = "rockchip,rk3128-dsi-dphy",
+		.data = &max_1ghz_video_phy_plat_data,
+	}, {
+		.compatible = "rockchip,rk3368-dsi-dphy",
+		.data = &max_1ghz_video_phy_plat_data,
+	}, {
+		.compatible = "rockchip,rk3568-dsi-dphy",
+		.data = &max_2_5ghz_video_phy_plat_data,
+	}, {
+		.compatible = "rockchip,rv1126-dsi-dphy",
+		.data = &max_2_5ghz_video_phy_plat_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, inno_dsidphy_of_match);
+
+static struct platform_driver inno_dsidphy_driver = {
+	.driver = {
+		.name = "inno-dsidphy",
+		.of_match_table	= of_match_ptr(inno_dsidphy_of_match),
+	},
+	.probe = inno_dsidphy_probe,
+	.remove_new = inno_dsidphy_remove,
+};
+module_platform_driver(inno_dsidphy_driver);
+
+MODULE_AUTHOR("Wyon Bi <bivvy.bi@rock-chips.com>");
+MODULE_DESCRIPTION("Innosilicon MIPI/LVDS/TTL Video Combo PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
new file mode 100644
index 0000000000..053bd62e31
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -0,0 +1,1438 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co. Ltd.
+ *
+ * Author: Zheng Yang <zhengyang@rock-chips.com>
+ *         Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define UPDATE(x, h, l)		(((x) << (l)) & GENMASK((h), (l)))
+
+/* REG: 0x00 */
+#define RK3228_PRE_PLL_REFCLK_SEL_PCLK			BIT(0)
+/* REG: 0x01 */
+#define RK3228_BYPASS_RXSENSE_EN			BIT(2)
+#define RK3228_BYPASS_PWRON_EN				BIT(1)
+#define RK3228_BYPASS_PLLPD_EN				BIT(0)
+/* REG: 0x02 */
+#define RK3228_BYPASS_PDATA_EN				BIT(4)
+#define RK3228_PDATAEN_DISABLE				BIT(0)
+/* REG: 0x03 */
+#define RK3228_BYPASS_AUTO_TERM_RES_CAL			BIT(7)
+#define RK3228_AUTO_TERM_RES_CAL_SPEED_14_8(x)		UPDATE(x, 6, 0)
+/* REG: 0x04 */
+#define RK3228_AUTO_TERM_RES_CAL_SPEED_7_0(x)		UPDATE(x, 7, 0)
+/* REG: 0xaa */
+#define RK3228_POST_PLL_CTRL_MANUAL			BIT(0)
+/* REG: 0xe0 */
+#define RK3228_POST_PLL_POWER_DOWN			BIT(5)
+#define RK3228_PRE_PLL_POWER_DOWN			BIT(4)
+#define RK3228_RXSENSE_CLK_CH_ENABLE			BIT(3)
+#define RK3228_RXSENSE_DATA_CH2_ENABLE			BIT(2)
+#define RK3228_RXSENSE_DATA_CH1_ENABLE			BIT(1)
+#define RK3228_RXSENSE_DATA_CH0_ENABLE			BIT(0)
+/* REG: 0xe1 */
+#define RK3228_BANDGAP_ENABLE				BIT(4)
+#define RK3228_TMDS_DRIVER_ENABLE			GENMASK(3, 0)
+/* REG: 0xe2 */
+#define RK3228_PRE_PLL_FB_DIV_8_MASK			BIT(7)
+#define RK3228_PRE_PLL_FB_DIV_8(x)			UPDATE((x) >> 8, 7, 7)
+#define RK3228_PCLK_VCO_DIV_5_MASK			BIT(5)
+#define RK3228_PCLK_VCO_DIV_5(x)			UPDATE(x, 5, 5)
+#define RK3228_PRE_PLL_PRE_DIV_MASK			GENMASK(4, 0)
+#define RK3228_PRE_PLL_PRE_DIV(x)			UPDATE(x, 4, 0)
+/* REG: 0xe3 */
+#define RK3228_PRE_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
+/* REG: 0xe4 */
+#define RK3228_PRE_PLL_PCLK_DIV_B_MASK			GENMASK(6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_B_SHIFT			5
+#define RK3228_PRE_PLL_PCLK_DIV_B(x)			UPDATE(x, 6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_A_MASK			GENMASK(4, 0)
+#define RK3228_PRE_PLL_PCLK_DIV_A(x)			UPDATE(x, 4, 0)
+/* REG: 0xe5 */
+#define RK3228_PRE_PLL_PCLK_DIV_C_MASK			GENMASK(6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_C(x)			UPDATE(x, 6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_D_MASK			GENMASK(4, 0)
+#define RK3228_PRE_PLL_PCLK_DIV_D(x)			UPDATE(x, 4, 0)
+/* REG: 0xe6 */
+#define RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK		GENMASK(5, 4)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_C(x)			UPDATE(x, 5, 4)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK		GENMASK(3, 2)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_A(x)			UPDATE(x, 3, 2)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK		GENMASK(1, 0)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_B(x)			UPDATE(x, 1, 0)
+/* REG: 0xe8 */
+#define RK3228_PRE_PLL_LOCK_STATUS			BIT(0)
+/* REG: 0xe9 */
+#define RK3228_POST_PLL_POST_DIV_ENABLE			UPDATE(3, 7, 6)
+#define RK3228_POST_PLL_PRE_DIV_MASK			GENMASK(4, 0)
+#define RK3228_POST_PLL_PRE_DIV(x)			UPDATE(x, 4, 0)
+/* REG: 0xea */
+#define RK3228_POST_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
+/* REG: 0xeb */
+#define RK3228_POST_PLL_FB_DIV_8_MASK			BIT(7)
+#define RK3228_POST_PLL_FB_DIV_8(x)			UPDATE((x) >> 8, 7, 7)
+#define RK3228_POST_PLL_POST_DIV_MASK			GENMASK(5, 4)
+#define RK3228_POST_PLL_POST_DIV(x)			UPDATE(x, 5, 4)
+#define RK3228_POST_PLL_LOCK_STATUS			BIT(0)
+/* REG: 0xee */
+#define RK3228_TMDS_CH_TA_ENABLE			GENMASK(7, 4)
+/* REG: 0xef */
+#define RK3228_TMDS_CLK_CH_TA(x)			UPDATE(x, 7, 6)
+#define RK3228_TMDS_DATA_CH2_TA(x)			UPDATE(x, 5, 4)
+#define RK3228_TMDS_DATA_CH1_TA(x)			UPDATE(x, 3, 2)
+#define RK3228_TMDS_DATA_CH0_TA(x)			UPDATE(x, 1, 0)
+/* REG: 0xf0 */
+#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS_MASK		GENMASK(5, 4)
+#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS(x)		UPDATE(x, 5, 4)
+#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS_MASK		GENMASK(3, 2)
+#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS(x)		UPDATE(x, 3, 2)
+#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS_MASK		GENMASK(1, 0)
+#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS(x)		UPDATE(x, 1, 0)
+/* REG: 0xf1 */
+#define RK3228_TMDS_CLK_CH_OUTPUT_SWING(x)		UPDATE(x, 7, 4)
+#define RK3228_TMDS_DATA_CH2_OUTPUT_SWING(x)		UPDATE(x, 3, 0)
+/* REG: 0xf2 */
+#define RK3228_TMDS_DATA_CH1_OUTPUT_SWING(x)		UPDATE(x, 7, 4)
+#define RK3228_TMDS_DATA_CH0_OUTPUT_SWING(x)		UPDATE(x, 3, 0)
+
+/* REG: 0x01 */
+#define RK3328_BYPASS_RXSENSE_EN			BIT(2)
+#define RK3328_BYPASS_POWERON_EN			BIT(1)
+#define RK3328_BYPASS_PLLPD_EN				BIT(0)
+/* REG: 0x02 */
+#define RK3328_INT_POL_HIGH				BIT(7)
+#define RK3328_BYPASS_PDATA_EN				BIT(4)
+#define RK3328_PDATA_EN					BIT(0)
+/* REG:0x05 */
+#define RK3328_INT_TMDS_CLK(x)				UPDATE(x, 7, 4)
+#define RK3328_INT_TMDS_D2(x)				UPDATE(x, 3, 0)
+/* REG:0x07 */
+#define RK3328_INT_TMDS_D1(x)				UPDATE(x, 7, 4)
+#define RK3328_INT_TMDS_D0(x)				UPDATE(x, 3, 0)
+/* for all RK3328_INT_TMDS_*, ESD_DET as defined in 0xc8-0xcb */
+#define RK3328_INT_AGND_LOW_PULSE_LOCKED		BIT(3)
+#define RK3328_INT_RXSENSE_LOW_PULSE_LOCKED		BIT(2)
+#define RK3328_INT_VSS_AGND_ESD_DET			BIT(1)
+#define RK3328_INT_AGND_VSS_ESD_DET			BIT(0)
+/* REG: 0xa0 */
+#define RK3328_PCLK_VCO_DIV_5_MASK			BIT(1)
+#define RK3328_PCLK_VCO_DIV_5(x)			UPDATE(x, 1, 1)
+#define RK3328_PRE_PLL_POWER_DOWN			BIT(0)
+/* REG: 0xa1 */
+#define RK3328_PRE_PLL_PRE_DIV_MASK			GENMASK(5, 0)
+#define RK3328_PRE_PLL_PRE_DIV(x)			UPDATE(x, 5, 0)
+/* REG: 0xa2 */
+/* unset means center spread */
+#define RK3328_SPREAD_SPECTRUM_MOD_DOWN			BIT(7)
+#define RK3328_SPREAD_SPECTRUM_MOD_DISABLE		BIT(6)
+#define RK3328_PRE_PLL_FRAC_DIV_DISABLE			UPDATE(3, 5, 4)
+#define RK3328_PRE_PLL_FB_DIV_11_8_MASK			GENMASK(3, 0)
+#define RK3328_PRE_PLL_FB_DIV_11_8(x)			UPDATE((x) >> 8, 3, 0)
+/* REG: 0xa3 */
+#define RK3328_PRE_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
+/* REG: 0xa4*/
+#define RK3328_PRE_PLL_TMDSCLK_DIV_C_MASK		GENMASK(1, 0)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_C(x)			UPDATE(x, 1, 0)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_B_MASK		GENMASK(3, 2)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_B(x)			UPDATE(x, 3, 2)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_A_MASK		GENMASK(5, 4)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_A(x)			UPDATE(x, 5, 4)
+/* REG: 0xa5 */
+#define RK3328_PRE_PLL_PCLK_DIV_B_SHIFT			5
+#define RK3328_PRE_PLL_PCLK_DIV_B_MASK			GENMASK(6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_B(x)			UPDATE(x, 6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_A_MASK			GENMASK(4, 0)
+#define RK3328_PRE_PLL_PCLK_DIV_A(x)			UPDATE(x, 4, 0)
+/* REG: 0xa6 */
+#define RK3328_PRE_PLL_PCLK_DIV_C_SHIFT			5
+#define RK3328_PRE_PLL_PCLK_DIV_C_MASK			GENMASK(6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_C(x)			UPDATE(x, 6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_D_MASK			GENMASK(4, 0)
+#define RK3328_PRE_PLL_PCLK_DIV_D(x)			UPDATE(x, 4, 0)
+/* REG: 0xa9 */
+#define RK3328_PRE_PLL_LOCK_STATUS			BIT(0)
+/* REG: 0xaa */
+#define RK3328_POST_PLL_POST_DIV_ENABLE			GENMASK(3, 2)
+#define RK3328_POST_PLL_REFCLK_SEL_TMDS			BIT(1)
+#define RK3328_POST_PLL_POWER_DOWN			BIT(0)
+/* REG:0xab */
+#define RK3328_POST_PLL_FB_DIV_8(x)			UPDATE((x) >> 8, 7, 7)
+#define RK3328_POST_PLL_PRE_DIV(x)			UPDATE(x, 4, 0)
+/* REG: 0xac */
+#define RK3328_POST_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
+/* REG: 0xad */
+#define RK3328_POST_PLL_POST_DIV_MASK			GENMASK(1, 0)
+#define RK3328_POST_PLL_POST_DIV_2			0x0
+#define RK3328_POST_PLL_POST_DIV_4			0x1
+#define RK3328_POST_PLL_POST_DIV_8			0x3
+/* REG: 0xaf */
+#define RK3328_POST_PLL_LOCK_STATUS			BIT(0)
+/* REG: 0xb0 */
+#define RK3328_BANDGAP_ENABLE				BIT(2)
+/* REG: 0xb2 */
+#define RK3328_TMDS_CLK_DRIVER_EN			BIT(3)
+#define RK3328_TMDS_D2_DRIVER_EN			BIT(2)
+#define RK3328_TMDS_D1_DRIVER_EN			BIT(1)
+#define RK3328_TMDS_D0_DRIVER_EN			BIT(0)
+#define RK3328_TMDS_DRIVER_ENABLE		(RK3328_TMDS_CLK_DRIVER_EN | \
+						RK3328_TMDS_D2_DRIVER_EN | \
+						RK3328_TMDS_D1_DRIVER_EN | \
+						RK3328_TMDS_D0_DRIVER_EN)
+/* REG:0xc5 */
+#define RK3328_BYPASS_TERM_RESISTOR_CALIB		BIT(7)
+#define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x)	UPDATE((x) >> 8, 6, 0)
+/* REG:0xc6 */
+#define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x)		UPDATE(x, 7, 0)
+/* REG:0xc7 */
+#define RK3328_TERM_RESISTOR_50				UPDATE(0, 2, 1)
+#define RK3328_TERM_RESISTOR_62_5			UPDATE(1, 2, 1)
+#define RK3328_TERM_RESISTOR_75				UPDATE(2, 2, 1)
+#define RK3328_TERM_RESISTOR_100			UPDATE(3, 2, 1)
+/* REG 0xc8 - 0xcb */
+#define RK3328_ESD_DETECT_MASK				GENMASK(7, 6)
+#define RK3328_ESD_DETECT_340MV				(0x0 << 6)
+#define RK3328_ESD_DETECT_280MV				(0x1 << 6)
+#define RK3328_ESD_DETECT_260MV				(0x2 << 6)
+#define RK3328_ESD_DETECT_240MV				(0x3 << 6)
+/* resistors can be used in parallel */
+#define RK3328_TMDS_TERM_RESIST_MASK			GENMASK(5, 0)
+#define RK3328_TMDS_TERM_RESIST_75			BIT(5)
+#define RK3328_TMDS_TERM_RESIST_150			BIT(4)
+#define RK3328_TMDS_TERM_RESIST_300			BIT(3)
+#define RK3328_TMDS_TERM_RESIST_600			BIT(2)
+#define RK3328_TMDS_TERM_RESIST_1000			BIT(1)
+#define RK3328_TMDS_TERM_RESIST_2000			BIT(0)
+/* REG: 0xd1 */
+#define RK3328_PRE_PLL_FRAC_DIV_23_16(x)		UPDATE((x) >> 16, 7, 0)
+/* REG: 0xd2 */
+#define RK3328_PRE_PLL_FRAC_DIV_15_8(x)			UPDATE((x) >> 8, 7, 0)
+/* REG: 0xd3 */
+#define RK3328_PRE_PLL_FRAC_DIV_7_0(x)			UPDATE(x, 7, 0)
+
+struct inno_hdmi_phy_drv_data;
+
+struct inno_hdmi_phy {
+	struct device *dev;
+	struct regmap *regmap;
+	int irq;
+
+	struct phy *phy;
+	struct clk *sysclk;
+	struct clk *refoclk;
+	struct clk *refpclk;
+
+	/* platform data */
+	const struct inno_hdmi_phy_drv_data *plat_data;
+	int chip_version;
+
+	/* clk provider */
+	struct clk_hw hw;
+	struct clk *phyclk;
+	unsigned long pixclock;
+	unsigned long tmdsclock;
+};
+
+struct pre_pll_config {
+	unsigned long pixclock;
+	unsigned long tmdsclock;
+	u8 prediv;
+	u16 fbdiv;
+	u8 tmds_div_a;
+	u8 tmds_div_b;
+	u8 tmds_div_c;
+	u8 pclk_div_a;
+	u8 pclk_div_b;
+	u8 pclk_div_c;
+	u8 pclk_div_d;
+	u8 vco_div_5_en;
+	u32 fracdiv;
+};
+
+struct post_pll_config {
+	unsigned long tmdsclock;
+	u8 prediv;
+	u16 fbdiv;
+	u8 postdiv;
+	u8 version;
+};
+
+struct phy_config {
+	unsigned long	tmdsclock;
+	u8		regs[14];
+};
+
+struct inno_hdmi_phy_ops {
+	int (*init)(struct inno_hdmi_phy *inno);
+	int (*power_on)(struct inno_hdmi_phy *inno,
+			const struct post_pll_config *cfg,
+			const struct phy_config *phy_cfg);
+	void (*power_off)(struct inno_hdmi_phy *inno);
+};
+
+struct inno_hdmi_phy_drv_data {
+	const struct inno_hdmi_phy_ops	*ops;
+	const struct clk_ops		*clk_ops;
+	const struct phy_config		*phy_cfg_table;
+};
+
+static const struct pre_pll_config pre_pll_cfg_table[] = {
+	{ 25175000,  25175000,  3,  125, 3, 1, 1,  1, 3, 3,  4, 0, 0xe00000},
+	{ 25175000,  31468750,  1,   41, 0, 3, 3,  1, 3, 3,  4, 0, 0xf5554f},
+	{ 27000000,  27000000,  1,   36, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 27000000,  33750000,  1,   45, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{ 31500000,  31500000,  1,   42, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 31500000,  39375000,  1,  105, 1, 3, 3, 10, 0, 3,  4, 0,      0x0},
+	{ 33750000,  33750000,  1,   45, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 33750000,  42187500,  1,  169, 2, 3, 3, 15, 0, 3,  4, 0,      0x0},
+	{ 35500000,  35500000,  1,   71, 2, 2, 2,  6, 0, 3,  4, 0,      0x0},
+	{ 35500000,  44375000,  1,   74, 3, 1, 1, 25, 0, 1,  1, 0,      0x0},
+	{ 36000000,  36000000,  1,   36, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{ 36000000,  45000000,  1,   45, 2, 1, 1, 15, 0, 1,  1, 0,      0x0},
+	{ 40000000,  40000000,  1,   40, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{ 40000000,  50000000,  1,   50, 2, 1, 1, 15, 0, 1,  1, 0,      0x0},
+	{ 49500000,  49500000,  1,   66, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 49500000,  61875000,  1,  165, 1, 3, 3, 10, 0, 3,  4, 0,      0x0},
+	{ 50000000,  50000000,  1,   50, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{ 50000000,  62500000,  1,  125, 2, 2, 2, 15, 0, 2,  2, 0,      0x0},
+	{ 54000000,  54000000,  1,   36, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{ 54000000,  67500000,  1,   45, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{ 56250000,  56250000,  1,   75, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 56250000,  70312500,  1,  117, 3, 1, 1, 25, 0, 1,  1, 0,      0x0},
+	{ 59341000,  59341000,  1,  118, 2, 2, 2,  6, 0, 3,  4, 0, 0xae978d},
+	{ 59341000,  74176250,  2,  148, 2, 1, 1, 15, 0, 1,  1, 0, 0x5a3d70},
+	{ 59400000,  59400000,  1,   99, 3, 1, 1,  1, 3, 3,  4, 0,      0x0},
+	{ 59400000,  74250000,  1,   99, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{ 65000000,  65000000,  1,   65, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{ 65000000,  81250000,  3,  325, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{ 68250000,  68250000,  1,   91, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 68250000,  85312500,  1,  142, 3, 1, 1, 25, 0, 1,  1, 0,      0x0},
+	{ 71000000,  71000000,  1,   71, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{ 71000000,  88750000,  3,  355, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{ 72000000,  72000000,  1,   36, 2, 0, 0,  1, 1, 2,  2, 0,      0x0},
+	{ 72000000,  90000000,  1,   60, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{ 73250000,  73250000,  3,  293, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 73250000,  91562500,  1,   61, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{ 74176000,  74176000,  1,   37, 2, 0, 0,  1, 1, 2,  2, 0, 0x16872b},
+	{ 74176000,  92720000,  2,  185, 2, 1, 1, 15, 0, 1,  1, 0, 0x70a3d7},
+	{ 74250000,  74250000,  1,   99, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 74250000,  92812500,  4,  495, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{ 75000000,  75000000,  1,   50, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{ 75000000,  93750000,  1,  125, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{ 78750000,  78750000,  1,  105, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 78750000,  98437500,  1,  164, 3, 1, 1, 25, 0, 1,  1, 0,      0x0},
+	{ 79500000,  79500000,  1,   53, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{ 79500000,  99375000,  1,  199, 2, 2, 2, 15, 0, 2,  2, 0,      0x0},
+	{ 83500000,  83500000,  2,  167, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{ 83500000, 104375000,  1,  104, 2, 1, 1, 15, 0, 1,  1, 0, 0x600000},
+	{ 85500000,  85500000,  1,   57, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{ 85500000, 106875000,  1,  178, 3, 1, 1, 25, 0, 1,  1, 0,      0x0},
+	{ 85750000,  85750000,  3,  343, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 85750000, 107187500,  1,  143, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{ 88750000,  88750000,  3,  355, 0, 3, 3,  1, 2, 3,  4, 0,      0x0},
+	{ 88750000, 110937500,  1,  110, 2, 1, 1, 15, 0, 1,  1, 0, 0xf00000},
+	{ 94500000,  94500000,  1,   63, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{ 94500000, 118125000,  1,  197, 3, 1, 1, 25, 0, 1,  1, 0,      0x0},
+	{101000000, 101000000,  1,  101, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{101000000, 126250000,  1,   42, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{102250000, 102250000,  4,  409, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{102250000, 127812500,  1,  128, 2, 1, 1, 15, 0, 1,  1, 0,      0x0},
+	{106500000, 106500000,  1,   71, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{106500000, 133125000,  1,  133, 2, 1, 1, 15, 0, 1,  1, 0,      0x0},
+	{108000000, 108000000,  1,   36, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{108000000, 135000000,  1,   45, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{115500000, 115500000,  1,   77, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{115500000, 144375000,  1,   48, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{117500000, 117500000,  2,  235, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{117500000, 146875000,  1,   49, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{119000000, 119000000,  1,  119, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{119000000, 148750000,  3,  148, 0, 1, 1,  1, 3, 1,  1, 0, 0xc00000},
+	{121750000, 121750000,  4,  487, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{121750000, 152187500,  1,  203, 0, 3, 3,  1, 3, 3,  4, 0,      0x0},
+	{122500000, 122500000,  2,  245, 2, 1, 1,  1, 1, 3,  4, 0,      0x0},
+	{122500000, 153125000,  1,   51, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{135000000, 135000000,  1,   45, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{135000000, 168750000,  1,  169, 2, 1, 1, 15, 0, 1,  1, 0,      0x0},
+	{136750000, 136750000,  1,   68, 2, 0, 0,  1, 1, 2,  2, 0, 0x600000},
+	{136750000, 170937500,  1,  113, 0, 2, 2,  1, 3, 2,  2, 0, 0xf5554f},
+	{140250000, 140250000,  2,  187, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{140250000, 175312500,  1,  117, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{146250000, 146250000,  2,  195, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{146250000, 182812500,  1,   61, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{148250000, 148250000,  3,  222, 2, 0, 0,  1, 1, 2,  2, 0, 0x600000},
+	{148250000, 185312500,  1,  123, 0, 2, 2,  1, 3, 2,  2, 0, 0x8aaab0},
+	{148352000, 148352000,  2,  148, 2, 0, 0,  1, 1, 2,  2, 0, 0x5a1cac},
+	{148352000, 185440000,  3,  185, 0, 1, 1,  1, 3, 1,  1, 0, 0x70a3d7},
+	{148500000, 148500000,  1,   99, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{148500000, 185625000,  4,  495, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{154000000, 154000000,  1,   77, 2, 0, 0,  1, 1, 2,  2, 0,      0x0},
+	{154000000, 192500000,  1,   64, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{156000000, 156000000,  1,   52, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{156000000, 195000000,  1,   65, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{156750000, 156750000,  2,  209, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{156750000, 195937500,  1,  196, 2, 1, 1, 15, 0, 1,  1, 0,      0x0},
+	{157000000, 157000000,  2,  157, 2, 0, 0,  1, 1, 2,  2, 0,      0x0},
+	{157000000, 196250000,  1,  131, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{157500000, 157500000,  1,  105, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{157500000, 196875000,  1,  197, 2, 1, 1, 15, 0, 1,  1, 0,      0x0},
+	{162000000, 162000000,  1,   54, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{162000000, 202500000,  2,  135, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{175500000, 175500000,  1,  117, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{175500000, 219375000,  1,   73, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{179500000, 179500000,  3,  359, 0, 2, 2,  1, 0, 3,  4, 0,      0x0},
+	{179500000, 224375000,  1,   75, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{182750000, 182750000,  1,   91, 2, 0, 0,  1, 1, 2,  2, 0, 0x600000},
+	{182750000, 228437500,  1,  152, 0, 2, 2,  1, 3, 2,  2, 0, 0x4aaab0},
+	{182750000, 228437500,  1,  152, 0, 2, 2,  1, 3, 2,  2, 0, 0x4aaab0},
+	{187000000, 187000000,  2,  187, 2, 0, 0,  1, 1, 2,  2, 0,      0x0},
+	{187000000, 233750000,  1,   39, 0, 0, 0,  1, 3, 0,  0, 1,      0x0},
+	{187250000, 187250000,  3,  280, 2, 0, 0,  1, 1, 2,  2, 0, 0xe00000},
+	{187250000, 234062500,  1,  156, 0, 2, 2,  1, 3, 2,  2, 0,  0xaaab0},
+	{189000000, 189000000,  1,   63, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{189000000, 236250000,  1,   79, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{193250000, 193250000,  3,  289, 2, 0, 0,  1, 1, 2,  2, 0, 0xe00000},
+	{193250000, 241562500,  1,  161, 0, 2, 2,  1, 3, 2,  2, 0,  0xaaab0},
+	{202500000, 202500000,  2,  135, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{202500000, 253125000,  1,  169, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{204750000, 204750000,  4,  273, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{204750000, 255937500,  1,  171, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{208000000, 208000000,  1,  104, 2, 0, 0,  1, 1, 2,  2, 0,      0x0},
+	{208000000, 260000000,  1,  173, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{214750000, 214750000,  1,  107, 2, 0, 0,  1, 1, 2,  2, 0, 0x600000},
+	{214750000, 268437500,  1,  178, 0, 2, 2,  1, 3, 2,  2, 0, 0xf5554f},
+	{218250000, 218250000,  4,  291, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{218250000, 272812500,  1,   91, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{229500000, 229500000,  2,  153, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{229500000, 286875000,  1,  191, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{234000000, 234000000,  1,   39, 0, 0, 0,  1, 0, 1,  1, 0,      0x0},
+	{234000000, 292500000,  1,  195, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{241500000, 241500000,  2,  161, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{241500000, 301875000,  1,  201, 0, 2, 2,  1, 3, 2,  2, 0,      0x0},
+	{245250000, 245250000,  4,  327, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{245250000, 306562500,  1,   51, 0, 0, 0,  1, 3, 0,  0, 1,      0x0},
+	{245500000, 245500000,  4,  491, 2, 0, 0,  1, 1, 2,  2, 0,      0x0},
+	{245500000, 306875000,  1,   51, 0, 0, 0,  1, 3, 0,  0, 1,      0x0},
+	{261000000, 261000000,  1,   87, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{261000000, 326250000,  1,  109, 0, 1, 1,  1, 3, 1,  1, 0,      0x0},
+	{268250000, 268250000,  9,  402, 0, 0, 0,  1, 0, 1,  1, 0, 0x600000},
+	{268250000, 335312500,  1,  111, 0, 1, 1,  1, 3, 1,  1, 0, 0xc5554f},
+	{268500000, 268500000,  2,  179, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{268500000, 335625000,  1,   56, 0, 0, 0,  1, 3, 0,  0, 1,      0x0},
+	{281250000, 281250000,  4,  375, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{281250000, 351562500,  1,  117, 0, 3, 1,  1, 3, 1,  1, 0,      0x0},
+	{288000000, 288000000,  1,   48, 0, 0, 0,  1, 0, 1,  1, 0,      0x0},
+	{288000000, 360000000,  1,   60, 0, 2, 0,  1, 3, 0,  0, 1,      0x0},
+	{296703000, 296703000,  1,   49, 0, 0, 0,  1, 0, 1,  1, 0, 0x7353f7},
+	{296703000, 370878750,  1,  123, 0, 3, 1,  1, 3, 1,  1, 0, 0xa051eb},
+	{297000000, 297000000,  1,   99, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{297000000, 371250000,  4,  495, 0, 3, 1,  1, 3, 1,  1, 0,      0x0},
+	{312250000, 312250000,  9,  468, 0, 0, 0,  1, 0, 1,  1, 0, 0x600000},
+	{312250000, 390312500,  1,  130, 0, 3, 1,  1, 3, 1,  1, 0, 0x1aaab0},
+	{317000000, 317000000,  3,  317, 0, 1, 1,  1, 0, 2,  2, 0,      0x0},
+	{317000000, 396250000,  1,   66, 0, 2, 0,  1, 3, 0,  0, 1,      0x0},
+	{319750000, 319750000,  3,  159, 0, 0, 0,  1, 0, 1,  1, 0, 0xe00000},
+	{319750000, 399687500,  3,  199, 0, 2, 0,  1, 3, 0,  0, 1, 0xd80000},
+	{333250000, 333250000,  9,  499, 0, 0, 0,  1, 0, 1,  1, 0, 0xe00000},
+	{333250000, 416562500,  1,  138, 0, 3, 1,  1, 3, 1,  1, 0, 0xdaaab0},
+	{348500000, 348500000,  9,  522, 0, 2, 0,  1, 0, 1,  1, 0, 0xc00000},
+	{348500000, 435625000,  1,  145, 0, 3, 1,  1, 3, 1,  1, 0, 0x35554f},
+	{356500000, 356500000,  9,  534, 0, 2, 0,  1, 0, 1,  1, 0, 0xc00000},
+	{356500000, 445625000,  1,  148, 0, 3, 1,  1, 3, 1,  1, 0, 0x8aaab0},
+	{380500000, 380500000,  9,  570, 0, 2, 0,  1, 0, 1,  1, 0, 0xc00000},
+	{380500000, 475625000,  1,  158, 0, 3, 1,  1, 3, 1,  1, 0, 0x8aaab0},
+	{443250000, 443250000,  1,   73, 0, 2, 0,  1, 0, 1,  1, 0, 0xe00000},
+	{443250000, 554062500,  1,   92, 0, 2, 0,  1, 3, 0,  0, 1, 0x580000},
+	{505250000, 505250000,  9,  757, 0, 2, 0,  1, 0, 1,  1, 0, 0xe00000},
+	{552750000, 552750000,  3,  276, 0, 2, 0,  1, 0, 1,  1, 0, 0x600000},
+	{593407000, 296703500,  3,  296, 0, 1, 1,  1, 0, 1,  1, 0, 0xb41893},
+	{593407000, 370879375,  4,  494, 0, 3, 1,  1, 3, 0,  0, 1, 0x817e4a},
+	{593407000, 593407000,  3,  296, 0, 2, 0,  1, 0, 1,  1, 0, 0xb41893},
+	{594000000, 297000000,  1,   99, 0, 1, 1,  1, 0, 1,  1, 0,      0x0},
+	{594000000, 371250000,  4,  495, 0, 3, 1,  1, 3, 0,  0, 1,      0x0},
+	{594000000, 594000000,  1,   99, 0, 2, 0,  1, 0, 1,  1, 0,      0x0},
+	{ /* sentinel */ }
+};
+
+static const struct post_pll_config post_pll_cfg_table[] = {
+	{33750000,  1, 40, 8, 1},
+	{33750000,  1, 80, 8, 2},
+	{74250000,  1, 40, 8, 1},
+	{74250000, 18, 80, 8, 2},
+	{148500000, 2, 40, 4, 3},
+	{297000000, 4, 40, 2, 3},
+	{594000000, 8, 40, 1, 3},
+	{ /* sentinel */ }
+};
+
+/* phy tuning values for an undocumented set of registers */
+static const struct phy_config rk3228_phy_cfg[] = {
+	{	165000000, {
+			0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00,
+		},
+	}, {
+		340000000, {
+			0xaa, 0x15, 0x6a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00,
+		},
+	}, {
+		594000000, {
+			0xaa, 0x15, 0x7a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00,
+		},
+	}, { /* sentinel */ },
+};
+
+/* phy tuning values for an undocumented set of registers */
+static const struct phy_config rk3328_phy_cfg[] = {
+	{	165000000, {
+			0x07, 0x0a, 0x0a, 0x0a, 0x00, 0x00, 0x08, 0x08, 0x08,
+			0x00, 0xac, 0xcc, 0xcc, 0xcc,
+		},
+	}, {
+		340000000, {
+			0x0b, 0x0d, 0x0d, 0x0d, 0x07, 0x15, 0x08, 0x08, 0x08,
+			0x3f, 0xac, 0xcc, 0xcd, 0xdd,
+		},
+	}, {
+		594000000, {
+			0x10, 0x1a, 0x1a, 0x1a, 0x07, 0x15, 0x08, 0x08, 0x08,
+			0x00, 0xac, 0xcc, 0xcc, 0xcc,
+		},
+	}, { /* sentinel */ },
+};
+
+static inline struct inno_hdmi_phy *to_inno_hdmi_phy(struct clk_hw *hw)
+{
+	return container_of(hw, struct inno_hdmi_phy, hw);
+}
+
+/*
+ * The register description of the IP block does not use any distinct names
+ * but instead the databook simply numbers the registers in one-increments.
+ * As the registers are obviously 32bit sized, the inno_* functions
+ * translate the databook register names to the actual registers addresses.
+ */
+static inline void inno_write(struct inno_hdmi_phy *inno, u32 reg, u8 val)
+{
+	regmap_write(inno->regmap, reg * 4, val);
+}
+
+static inline u8 inno_read(struct inno_hdmi_phy *inno, u32 reg)
+{
+	u32 val;
+
+	regmap_read(inno->regmap, reg * 4, &val);
+
+	return val;
+}
+
+static inline void inno_update_bits(struct inno_hdmi_phy *inno, u8 reg,
+				    u8 mask, u8 val)
+{
+	regmap_update_bits(inno->regmap, reg * 4, mask, val);
+}
+
+#define inno_poll(inno, reg, val, cond, sleep_us, timeout_us) \
+	regmap_read_poll_timeout((inno)->regmap, (reg) * 4, val, cond, \
+				 sleep_us, timeout_us)
+
+static unsigned long inno_hdmi_phy_get_tmdsclk(struct inno_hdmi_phy *inno,
+					       unsigned long rate)
+{
+	int bus_width = phy_get_bus_width(inno->phy);
+
+	switch (bus_width) {
+	case 4:
+	case 5:
+	case 6:
+	case 10:
+	case 12:
+	case 16:
+		return (u64)rate * bus_width / 8;
+	default:
+		return rate;
+	}
+}
+
+static irqreturn_t inno_hdmi_phy_rk3328_hardirq(int irq, void *dev_id)
+{
+	struct inno_hdmi_phy *inno = dev_id;
+	int intr_stat1, intr_stat2, intr_stat3;
+
+	intr_stat1 = inno_read(inno, 0x04);
+	intr_stat2 = inno_read(inno, 0x06);
+	intr_stat3 = inno_read(inno, 0x08);
+
+	if (intr_stat1)
+		inno_write(inno, 0x04, intr_stat1);
+	if (intr_stat2)
+		inno_write(inno, 0x06, intr_stat2);
+	if (intr_stat3)
+		inno_write(inno, 0x08, intr_stat3);
+
+	if (intr_stat1 || intr_stat2 || intr_stat3)
+		return IRQ_WAKE_THREAD;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t inno_hdmi_phy_rk3328_irq(int irq, void *dev_id)
+{
+	struct inno_hdmi_phy *inno = dev_id;
+
+	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
+	usleep_range(10, 20);
+	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
+
+	return IRQ_HANDLED;
+}
+
+static int inno_hdmi_phy_power_on(struct phy *phy)
+{
+	struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
+	const struct post_pll_config *cfg = post_pll_cfg_table;
+	const struct phy_config *phy_cfg = inno->plat_data->phy_cfg_table;
+	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno,
+							    inno->pixclock);
+	int ret;
+
+	if (!tmdsclock) {
+		dev_err(inno->dev, "TMDS clock is zero!\n");
+		return -EINVAL;
+	}
+
+	if (!inno->plat_data->ops->power_on)
+		return -EINVAL;
+
+	for (; cfg->tmdsclock != 0; cfg++)
+		if (tmdsclock <= cfg->tmdsclock &&
+		    cfg->version & inno->chip_version)
+			break;
+
+	for (; phy_cfg->tmdsclock != 0; phy_cfg++)
+		if (tmdsclock <= phy_cfg->tmdsclock)
+			break;
+
+	if (cfg->tmdsclock == 0 || phy_cfg->tmdsclock == 0)
+		return -EINVAL;
+
+	dev_dbg(inno->dev, "Inno HDMI PHY Power On\n");
+
+	inno->plat_data->clk_ops->set_rate(&inno->hw, inno->pixclock, 24000000);
+
+	ret = clk_prepare_enable(inno->phyclk);
+	if (ret)
+		return ret;
+
+	ret = inno->plat_data->ops->power_on(inno, cfg, phy_cfg);
+	if (ret) {
+		clk_disable_unprepare(inno->phyclk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int inno_hdmi_phy_power_off(struct phy *phy)
+{
+	struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
+
+	if (!inno->plat_data->ops->power_off)
+		return -EINVAL;
+
+	inno->plat_data->ops->power_off(inno);
+
+	clk_disable_unprepare(inno->phyclk);
+
+	inno->tmdsclock = 0;
+
+	dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n");
+
+	return 0;
+}
+
+static const struct phy_ops inno_hdmi_phy_ops = {
+	.owner = THIS_MODULE,
+	.power_on = inno_hdmi_phy_power_on,
+	.power_off = inno_hdmi_phy_power_off,
+};
+
+static const
+struct pre_pll_config *inno_hdmi_phy_get_pre_pll_cfg(struct inno_hdmi_phy *inno,
+						     unsigned long rate)
+{
+	const struct pre_pll_config *cfg = pre_pll_cfg_table;
+	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+
+	for (; cfg->pixclock != 0; cfg++)
+		if (cfg->pixclock == rate && cfg->tmdsclock == tmdsclock)
+			break;
+
+	if (cfg->pixclock == 0)
+		return ERR_PTR(-EINVAL);
+
+	return cfg;
+}
+
+static int inno_hdmi_phy_rk3228_clk_is_prepared(struct clk_hw *hw)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+	u8 status;
+
+	status = inno_read(inno, 0xe0) & RK3228_PRE_PLL_POWER_DOWN;
+	return status ? 0 : 1;
+}
+
+static int inno_hdmi_phy_rk3228_clk_prepare(struct clk_hw *hw)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
+	return 0;
+}
+
+static void inno_hdmi_phy_rk3228_clk_unprepare(struct clk_hw *hw)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
+			 RK3228_PRE_PLL_POWER_DOWN);
+}
+
+static
+unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw,
+						   unsigned long parent_rate)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+	u8 nd, no_a, no_b, no_d;
+	u64 vco;
+	u16 nf;
+
+	nd = inno_read(inno, 0xe2) & RK3228_PRE_PLL_PRE_DIV_MASK;
+	nf = (inno_read(inno, 0xe2) & RK3228_PRE_PLL_FB_DIV_8_MASK) << 1;
+	nf |= inno_read(inno, 0xe3);
+	vco = parent_rate * nf;
+
+	if (inno_read(inno, 0xe2) & RK3228_PCLK_VCO_DIV_5_MASK) {
+		do_div(vco, nd * 5);
+	} else {
+		no_a = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_A_MASK;
+		if (!no_a)
+			no_a = 1;
+		no_b = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_B_MASK;
+		no_b >>= RK3228_PRE_PLL_PCLK_DIV_B_SHIFT;
+		no_b += 2;
+		no_d = inno_read(inno, 0xe5) & RK3228_PRE_PLL_PCLK_DIV_D_MASK;
+
+		do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
+	}
+
+	inno->pixclock = vco;
+
+	dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
+
+	return vco;
+}
+
+static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
+						unsigned long rate,
+						unsigned long *parent_rate)
+{
+	const struct pre_pll_config *cfg = pre_pll_cfg_table;
+
+	rate = (rate / 1000) * 1000;
+
+	for (; cfg->pixclock != 0; cfg++)
+		if (cfg->pixclock == rate && !cfg->fracdiv)
+			break;
+
+	if (cfg->pixclock == 0)
+		return -EINVAL;
+
+	return cfg->pixclock;
+}
+
+static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
+					     unsigned long rate,
+					     unsigned long parent_rate)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+	const struct pre_pll_config *cfg;
+	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+	u32 v;
+	int ret;
+
+	dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
+		__func__, rate, tmdsclock);
+
+	if (inno->pixclock == rate && inno->tmdsclock == tmdsclock)
+		return 0;
+
+	cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
+	if (IS_ERR(cfg))
+		return PTR_ERR(cfg);
+
+	/* Power down PRE-PLL */
+	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
+			 RK3228_PRE_PLL_POWER_DOWN);
+
+	inno_update_bits(inno, 0xe2, RK3228_PRE_PLL_FB_DIV_8_MASK |
+			 RK3228_PCLK_VCO_DIV_5_MASK |
+			 RK3228_PRE_PLL_PRE_DIV_MASK,
+			 RK3228_PRE_PLL_FB_DIV_8(cfg->fbdiv) |
+			 RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en) |
+			 RK3228_PRE_PLL_PRE_DIV(cfg->prediv));
+	inno_write(inno, 0xe3, RK3228_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
+	inno_update_bits(inno, 0xe4, RK3228_PRE_PLL_PCLK_DIV_B_MASK |
+			 RK3228_PRE_PLL_PCLK_DIV_A_MASK,
+			 RK3228_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b) |
+			 RK3228_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a));
+	inno_update_bits(inno, 0xe5, RK3228_PRE_PLL_PCLK_DIV_C_MASK |
+			 RK3228_PRE_PLL_PCLK_DIV_D_MASK,
+			 RK3228_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
+			 RK3228_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
+	inno_update_bits(inno, 0xe6, RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK |
+			 RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK |
+			 RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK,
+			 RK3228_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
+			 RK3228_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
+			 RK3228_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
+
+	/* Power up PRE-PLL */
+	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
+
+	/* Wait for Pre-PLL lock */
+	ret = inno_poll(inno, 0xe8, v, v & RK3228_PRE_PLL_LOCK_STATUS,
+			100, 100000);
+	if (ret) {
+		dev_err(inno->dev, "Pre-PLL locking failed\n");
+		return ret;
+	}
+
+	inno->pixclock = rate;
+	inno->tmdsclock = tmdsclock;
+
+	return 0;
+}
+
+static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = {
+	.prepare = inno_hdmi_phy_rk3228_clk_prepare,
+	.unprepare = inno_hdmi_phy_rk3228_clk_unprepare,
+	.is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared,
+	.recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate,
+	.round_rate = inno_hdmi_phy_rk3228_clk_round_rate,
+	.set_rate = inno_hdmi_phy_rk3228_clk_set_rate,
+};
+
+static int inno_hdmi_phy_rk3328_clk_is_prepared(struct clk_hw *hw)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+	u8 status;
+
+	status = inno_read(inno, 0xa0) & RK3328_PRE_PLL_POWER_DOWN;
+	return status ? 0 : 1;
+}
+
+static int inno_hdmi_phy_rk3328_clk_prepare(struct clk_hw *hw)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
+	return 0;
+}
+
+static void inno_hdmi_phy_rk3328_clk_unprepare(struct clk_hw *hw)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
+			 RK3328_PRE_PLL_POWER_DOWN);
+}
+
+static
+unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
+						   unsigned long parent_rate)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+	unsigned long frac;
+	u8 nd, no_a, no_b, no_d;
+	u64 vco;
+	u16 nf;
+
+	nd = inno_read(inno, 0xa1) & RK3328_PRE_PLL_PRE_DIV_MASK;
+	nf = ((inno_read(inno, 0xa2) & RK3328_PRE_PLL_FB_DIV_11_8_MASK) << 8);
+	nf |= inno_read(inno, 0xa3);
+	vco = parent_rate * nf;
+
+	if (!(inno_read(inno, 0xa2) & RK3328_PRE_PLL_FRAC_DIV_DISABLE)) {
+		frac = inno_read(inno, 0xd3) |
+		       (inno_read(inno, 0xd2) << 8) |
+		       (inno_read(inno, 0xd1) << 16);
+		vco += DIV_ROUND_CLOSEST(parent_rate * frac, (1 << 24));
+	}
+
+	if (inno_read(inno, 0xa0) & RK3328_PCLK_VCO_DIV_5_MASK) {
+		do_div(vco, nd * 5);
+	} else {
+		no_a = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_A_MASK;
+		no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK;
+		no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT;
+		no_b += 2;
+		no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK;
+
+		do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
+	}
+
+	inno->pixclock = DIV_ROUND_CLOSEST((unsigned long)vco, 1000) * 1000;
+
+	dev_dbg(inno->dev, "%s rate %lu vco %llu\n",
+		__func__, inno->pixclock, vco);
+
+	return inno->pixclock;
+}
+
+static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
+						unsigned long rate,
+						unsigned long *parent_rate)
+{
+	const struct pre_pll_config *cfg = pre_pll_cfg_table;
+
+	rate = (rate / 1000) * 1000;
+
+	for (; cfg->pixclock != 0; cfg++)
+		if (cfg->pixclock == rate)
+			break;
+
+	if (cfg->pixclock == 0)
+		return -EINVAL;
+
+	return cfg->pixclock;
+}
+
+static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
+					     unsigned long rate,
+					     unsigned long parent_rate)
+{
+	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+	const struct pre_pll_config *cfg;
+	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+	u32 val;
+	int ret;
+
+	dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
+		__func__, rate, tmdsclock);
+
+	if (inno->pixclock == rate && inno->tmdsclock == tmdsclock)
+		return 0;
+
+	cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
+	if (IS_ERR(cfg))
+		return PTR_ERR(cfg);
+
+	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
+			 RK3328_PRE_PLL_POWER_DOWN);
+
+	/* Configure pre-pll */
+	inno_update_bits(inno, 0xa0, RK3328_PCLK_VCO_DIV_5_MASK,
+			 RK3328_PCLK_VCO_DIV_5(cfg->vco_div_5_en));
+	inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv));
+
+	val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE;
+	if (!cfg->fracdiv)
+		val |= RK3328_PRE_PLL_FRAC_DIV_DISABLE;
+	inno_write(inno, 0xa2, RK3328_PRE_PLL_FB_DIV_11_8(cfg->fbdiv) | val);
+	inno_write(inno, 0xa3, RK3328_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
+	inno_write(inno, 0xa5, RK3328_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a) |
+		   RK3328_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b));
+	inno_write(inno, 0xa6, RK3328_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
+		   RK3328_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
+	inno_write(inno, 0xa4, RK3328_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
+		   RK3328_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
+		   RK3328_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
+	inno_write(inno, 0xd3, RK3328_PRE_PLL_FRAC_DIV_7_0(cfg->fracdiv));
+	inno_write(inno, 0xd2, RK3328_PRE_PLL_FRAC_DIV_15_8(cfg->fracdiv));
+	inno_write(inno, 0xd1, RK3328_PRE_PLL_FRAC_DIV_23_16(cfg->fracdiv));
+
+	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
+
+	/* Wait for Pre-PLL lock */
+	ret = inno_poll(inno, 0xa9, val, val & RK3328_PRE_PLL_LOCK_STATUS,
+			1000, 10000);
+	if (ret) {
+		dev_err(inno->dev, "Pre-PLL locking failed\n");
+		return ret;
+	}
+
+	inno->pixclock = rate;
+	inno->tmdsclock = tmdsclock;
+
+	return 0;
+}
+
+static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = {
+	.prepare = inno_hdmi_phy_rk3328_clk_prepare,
+	.unprepare = inno_hdmi_phy_rk3328_clk_unprepare,
+	.is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared,
+	.recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate,
+	.round_rate = inno_hdmi_phy_rk3328_clk_round_rate,
+	.set_rate = inno_hdmi_phy_rk3328_clk_set_rate,
+};
+
+static int inno_hdmi_phy_clk_register(struct inno_hdmi_phy *inno)
+{
+	struct device *dev = inno->dev;
+	struct device_node *np = dev->of_node;
+	struct clk_init_data init;
+	const char *parent_name;
+	int ret;
+
+	parent_name = __clk_get_name(inno->refoclk);
+
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = 0;
+	init.name = "pin_hd20_pclk";
+	init.ops = inno->plat_data->clk_ops;
+
+	/* optional override of the clock name */
+	of_property_read_string(np, "clock-output-names", &init.name);
+
+	inno->hw.init = &init;
+
+	inno->phyclk = devm_clk_register(dev, &inno->hw);
+	if (IS_ERR(inno->phyclk)) {
+		ret = PTR_ERR(inno->phyclk);
+		dev_err(dev, "failed to register clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_clk_add_provider(np, of_clk_src_simple_get, inno->phyclk);
+	if (ret) {
+		dev_err(dev, "failed to register clock provider: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int inno_hdmi_phy_rk3228_init(struct inno_hdmi_phy *inno)
+{
+	/*
+	 * Use phy internal register control
+	 * rxsense/poweron/pllpd/pdataen signal.
+	 */
+	inno_write(inno, 0x01, RK3228_BYPASS_RXSENSE_EN |
+		   RK3228_BYPASS_PWRON_EN |
+		   RK3228_BYPASS_PLLPD_EN);
+	inno_update_bits(inno, 0x02, RK3228_BYPASS_PDATA_EN,
+			 RK3228_BYPASS_PDATA_EN);
+
+	/* manual power down post-PLL */
+	inno_update_bits(inno, 0xaa, RK3228_POST_PLL_CTRL_MANUAL,
+			 RK3228_POST_PLL_CTRL_MANUAL);
+
+	inno->chip_version = 1;
+
+	return 0;
+}
+
+static int
+inno_hdmi_phy_rk3228_power_on(struct inno_hdmi_phy *inno,
+			      const struct post_pll_config *cfg,
+			      const struct phy_config *phy_cfg)
+{
+	int ret;
+	u32 v;
+
+	inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE,
+			 RK3228_PDATAEN_DISABLE);
+	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
+			 RK3228_POST_PLL_POWER_DOWN,
+			 RK3228_PRE_PLL_POWER_DOWN |
+			 RK3228_POST_PLL_POWER_DOWN);
+
+	/* Post-PLL update */
+	inno_update_bits(inno, 0xe9, RK3228_POST_PLL_PRE_DIV_MASK,
+			 RK3228_POST_PLL_PRE_DIV(cfg->prediv));
+	inno_update_bits(inno, 0xeb, RK3228_POST_PLL_FB_DIV_8_MASK,
+			 RK3228_POST_PLL_FB_DIV_8(cfg->fbdiv));
+	inno_write(inno, 0xea, RK3228_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
+
+	if (cfg->postdiv == 1) {
+		inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
+				 0);
+	} else {
+		int div = cfg->postdiv / 2 - 1;
+
+		inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
+				 RK3228_POST_PLL_POST_DIV_ENABLE);
+		inno_update_bits(inno, 0xeb, RK3228_POST_PLL_POST_DIV_MASK,
+				 RK3228_POST_PLL_POST_DIV(div));
+	}
+
+	for (v = 0; v < 4; v++)
+		inno_write(inno, 0xef + v, phy_cfg->regs[v]);
+
+	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
+			 RK3228_POST_PLL_POWER_DOWN, 0);
+	inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE,
+			 RK3228_BANDGAP_ENABLE);
+	inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE,
+			 RK3228_TMDS_DRIVER_ENABLE);
+
+	/* Wait for post PLL lock */
+	ret = inno_poll(inno, 0xeb, v, v & RK3228_POST_PLL_LOCK_STATUS,
+			100, 100000);
+	if (ret) {
+		dev_err(inno->dev, "Post-PLL locking failed\n");
+		return ret;
+	}
+
+	if (cfg->tmdsclock > 340000000)
+		msleep(100);
+
+	inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, 0);
+	return 0;
+}
+
+static void inno_hdmi_phy_rk3228_power_off(struct inno_hdmi_phy *inno)
+{
+	inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, 0);
+	inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, 0);
+	inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN,
+			 RK3228_POST_PLL_POWER_DOWN);
+}
+
+static const struct inno_hdmi_phy_ops rk3228_hdmi_phy_ops = {
+	.init = inno_hdmi_phy_rk3228_init,
+	.power_on = inno_hdmi_phy_rk3228_power_on,
+	.power_off = inno_hdmi_phy_rk3228_power_off,
+};
+
+static int inno_hdmi_phy_rk3328_init(struct inno_hdmi_phy *inno)
+{
+	struct nvmem_cell *cell;
+	unsigned char *efuse_buf;
+	size_t len;
+
+	/*
+	 * Use phy internal register control
+	 * rxsense/poweron/pllpd/pdataen signal.
+	 */
+	inno_write(inno, 0x01, RK3328_BYPASS_RXSENSE_EN |
+		   RK3328_BYPASS_POWERON_EN |
+		   RK3328_BYPASS_PLLPD_EN);
+	inno_write(inno, 0x02, RK3328_INT_POL_HIGH | RK3328_BYPASS_PDATA_EN |
+		   RK3328_PDATA_EN);
+
+	/* Disable phy irq */
+	inno_write(inno, 0x05, 0);
+	inno_write(inno, 0x07, 0);
+
+	/* try to read the chip-version */
+	inno->chip_version = 1;
+	cell = nvmem_cell_get(inno->dev, "cpu-version");
+	if (IS_ERR(cell)) {
+		if (PTR_ERR(cell) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		return 0;
+	}
+
+	efuse_buf = nvmem_cell_read(cell, &len);
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(efuse_buf))
+		return 0;
+	if (len == 1)
+		inno->chip_version = efuse_buf[0] + 1;
+	kfree(efuse_buf);
+
+	return 0;
+}
+
+static int
+inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno,
+			      const struct post_pll_config *cfg,
+			      const struct phy_config *phy_cfg)
+{
+	int ret;
+	u32 v;
+
+	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
+	inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
+			 RK3328_POST_PLL_POWER_DOWN);
+
+	inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
+	if (cfg->postdiv == 1) {
+		inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
+			   RK3328_POST_PLL_PRE_DIV(cfg->prediv));
+		inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS |
+			   RK3328_POST_PLL_POWER_DOWN);
+	} else {
+		v = (cfg->postdiv / 2) - 1;
+		v &= RK3328_POST_PLL_POST_DIV_MASK;
+		inno_write(inno, 0xad, v);
+		inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
+			   RK3328_POST_PLL_PRE_DIV(cfg->prediv));
+		inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE |
+			   RK3328_POST_PLL_REFCLK_SEL_TMDS |
+			   RK3328_POST_PLL_POWER_DOWN);
+	}
+
+	for (v = 0; v < 14; v++)
+		inno_write(inno, 0xb5 + v, phy_cfg->regs[v]);
+
+	/* set ESD detection threshold for TMDS CLK, D2, D1 and D0 */
+	for (v = 0; v < 4; v++)
+		inno_update_bits(inno, 0xc8 + v, RK3328_ESD_DETECT_MASK,
+				 RK3328_ESD_DETECT_340MV);
+
+	if (phy_cfg->tmdsclock > 340000000) {
+		/* Set termination resistor to 100ohm */
+		v = clk_get_rate(inno->sysclk) / 100000;
+		inno_write(inno, 0xc5, RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(v)
+			   | RK3328_BYPASS_TERM_RESISTOR_CALIB);
+		inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));
+		inno_write(inno, 0xc7, RK3328_TERM_RESISTOR_100);
+		inno_update_bits(inno, 0xc5,
+				 RK3328_BYPASS_TERM_RESISTOR_CALIB, 0);
+	} else {
+		inno_write(inno, 0xc5, RK3328_BYPASS_TERM_RESISTOR_CALIB);
+
+		/* clk termination resistor is 50ohm (parallel resistors) */
+		if (phy_cfg->tmdsclock > 165000000)
+			inno_update_bits(inno, 0xc8,
+					 RK3328_TMDS_TERM_RESIST_MASK,
+					 RK3328_TMDS_TERM_RESIST_75 |
+					 RK3328_TMDS_TERM_RESIST_150);
+
+		/* data termination resistor for D2, D1 and D0 is 150ohm */
+		for (v = 0; v < 3; v++)
+			inno_update_bits(inno, 0xc9 + v,
+					 RK3328_TMDS_TERM_RESIST_MASK,
+					 RK3328_TMDS_TERM_RESIST_150);
+	}
+
+	inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, 0);
+	inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE,
+			 RK3328_BANDGAP_ENABLE);
+	inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE,
+			 RK3328_TMDS_DRIVER_ENABLE);
+
+	/* Wait for post PLL lock */
+	ret = inno_poll(inno, 0xaf, v, v & RK3328_POST_PLL_LOCK_STATUS,
+			1000, 10000);
+	if (ret) {
+		dev_err(inno->dev, "Post-PLL locking failed\n");
+		return ret;
+	}
+
+	if (phy_cfg->tmdsclock > 340000000)
+		msleep(100);
+
+	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
+
+	/* Enable PHY IRQ */
+	inno_write(inno, 0x05, RK3328_INT_TMDS_CLK(RK3328_INT_VSS_AGND_ESD_DET)
+		   | RK3328_INT_TMDS_D2(RK3328_INT_VSS_AGND_ESD_DET));
+	inno_write(inno, 0x07, RK3328_INT_TMDS_D1(RK3328_INT_VSS_AGND_ESD_DET)
+		   | RK3328_INT_TMDS_D0(RK3328_INT_VSS_AGND_ESD_DET));
+	return 0;
+}
+
+static void inno_hdmi_phy_rk3328_power_off(struct inno_hdmi_phy *inno)
+{
+	inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, 0);
+	inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, 0);
+	inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
+			 RK3328_POST_PLL_POWER_DOWN);
+
+	/* Disable PHY IRQ */
+	inno_write(inno, 0x05, 0);
+	inno_write(inno, 0x07, 0);
+}
+
+static const struct inno_hdmi_phy_ops rk3328_hdmi_phy_ops = {
+	.init = inno_hdmi_phy_rk3328_init,
+	.power_on = inno_hdmi_phy_rk3328_power_on,
+	.power_off = inno_hdmi_phy_rk3328_power_off,
+};
+
+static const struct inno_hdmi_phy_drv_data rk3228_hdmi_phy_drv_data = {
+	.ops = &rk3228_hdmi_phy_ops,
+	.clk_ops = &inno_hdmi_phy_rk3228_clk_ops,
+	.phy_cfg_table = rk3228_phy_cfg,
+};
+
+static const struct inno_hdmi_phy_drv_data rk3328_hdmi_phy_drv_data = {
+	.ops = &rk3328_hdmi_phy_ops,
+	.clk_ops = &inno_hdmi_phy_rk3328_clk_ops,
+	.phy_cfg_table = rk3328_phy_cfg,
+};
+
+static const struct regmap_config inno_hdmi_phy_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x400,
+};
+
+static void inno_hdmi_phy_action(void *data)
+{
+	struct inno_hdmi_phy *inno = data;
+
+	clk_disable_unprepare(inno->refpclk);
+	clk_disable_unprepare(inno->sysclk);
+}
+
+static int inno_hdmi_phy_probe(struct platform_device *pdev)
+{
+	struct inno_hdmi_phy *inno;
+	struct phy_provider *phy_provider;
+	void __iomem *regs;
+	int ret;
+
+	inno = devm_kzalloc(&pdev->dev, sizeof(*inno), GFP_KERNEL);
+	if (!inno)
+		return -ENOMEM;
+
+	inno->dev = &pdev->dev;
+
+	inno->plat_data = of_device_get_match_data(inno->dev);
+	if (!inno->plat_data || !inno->plat_data->ops)
+		return -EINVAL;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	inno->sysclk = devm_clk_get(inno->dev, "sysclk");
+	if (IS_ERR(inno->sysclk)) {
+		ret = PTR_ERR(inno->sysclk);
+		dev_err(inno->dev, "failed to get sysclk: %d\n", ret);
+		return ret;
+	}
+
+	inno->refpclk = devm_clk_get(inno->dev, "refpclk");
+	if (IS_ERR(inno->refpclk)) {
+		ret = PTR_ERR(inno->refpclk);
+		dev_err(inno->dev, "failed to get ref clock: %d\n", ret);
+		return ret;
+	}
+
+	inno->refoclk = devm_clk_get(inno->dev, "refoclk");
+	if (IS_ERR(inno->refoclk)) {
+		ret = PTR_ERR(inno->refoclk);
+		dev_err(inno->dev, "failed to get oscillator-ref clock: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(inno->sysclk);
+	if (ret) {
+		dev_err(inno->dev, "Cannot enable inno phy sysclk: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Refpclk needs to be on, on at least the rk3328 for still
+	 * unknown reasons.
+	 */
+	ret = clk_prepare_enable(inno->refpclk);
+	if (ret) {
+		dev_err(inno->dev, "failed to enable refpclk\n");
+		clk_disable_unprepare(inno->sysclk);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(inno->dev, inno_hdmi_phy_action,
+				       inno);
+	if (ret)
+		return ret;
+
+	inno->regmap = devm_regmap_init_mmio(inno->dev, regs,
+					     &inno_hdmi_phy_regmap_config);
+	if (IS_ERR(inno->regmap))
+		return PTR_ERR(inno->regmap);
+
+	/* only the newer rk3328 hdmiphy has an interrupt */
+	inno->irq = platform_get_irq(pdev, 0);
+	if (inno->irq > 0) {
+		ret = devm_request_threaded_irq(inno->dev, inno->irq,
+						inno_hdmi_phy_rk3328_hardirq,
+						inno_hdmi_phy_rk3328_irq,
+						IRQF_SHARED,
+						dev_name(inno->dev), inno);
+		if (ret)
+			return ret;
+	}
+
+	inno->phy = devm_phy_create(inno->dev, NULL, &inno_hdmi_phy_ops);
+	if (IS_ERR(inno->phy)) {
+		dev_err(inno->dev, "failed to create HDMI PHY\n");
+		return PTR_ERR(inno->phy);
+	}
+
+	phy_set_drvdata(inno->phy, inno);
+	phy_set_bus_width(inno->phy, 8);
+
+	if (inno->plat_data->ops->init) {
+		ret = inno->plat_data->ops->init(inno);
+		if (ret)
+			return ret;
+	}
+
+	ret = inno_hdmi_phy_clk_register(inno);
+	if (ret)
+		return ret;
+
+	phy_provider = devm_of_phy_provider_register(inno->dev,
+						     of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static void inno_hdmi_phy_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+}
+
+static const struct of_device_id inno_hdmi_phy_of_match[] = {
+	{
+		.compatible = "rockchip,rk3228-hdmi-phy",
+		.data = &rk3228_hdmi_phy_drv_data
+	}, {
+		.compatible = "rockchip,rk3328-hdmi-phy",
+		.data = &rk3328_hdmi_phy_drv_data
+	}, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match);
+
+static struct platform_driver inno_hdmi_phy_driver = {
+	.probe  = inno_hdmi_phy_probe,
+	.remove_new = inno_hdmi_phy_remove,
+	.driver = {
+		.name = "inno-hdmi-phy",
+		.of_match_table = inno_hdmi_phy_of_match,
+	},
+};
+module_platform_driver(inno_hdmi_phy_driver);
+
+MODULE_AUTHOR("Zheng Yang <zhengyang@rock-chips.com>");
+MODULE_DESCRIPTION("Innosilion HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
new file mode 100644
index 0000000000..b982c3f0d4
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -0,0 +1,2018 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/mfd/syscon.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+#define BIT_WRITEABLE_SHIFT	16
+#define SCHEDULE_DELAY		(60 * HZ)
+#define OTG_SCHEDULE_DELAY	(2 * HZ)
+
+struct rockchip_usb2phy;
+
+enum rockchip_usb2phy_port_id {
+	USB2PHY_PORT_OTG,
+	USB2PHY_PORT_HOST,
+	USB2PHY_NUM_PORTS,
+};
+
+enum rockchip_usb2phy_host_state {
+	PHY_STATE_HS_ONLINE	= 0,
+	PHY_STATE_DISCONNECT	= 1,
+	PHY_STATE_CONNECT	= 2,
+	PHY_STATE_FS_LS_ONLINE	= 4,
+};
+
+/**
+ * enum usb_chg_state - Different states involved in USB charger detection.
+ * @USB_CHG_STATE_UNDEFINED:	USB charger is not connected or detection
+ *				process is not yet started.
+ * @USB_CHG_STATE_WAIT_FOR_DCD:	Waiting for Data pins contact.
+ * @USB_CHG_STATE_DCD_DONE:	Data pin contact is detected.
+ * @USB_CHG_STATE_PRIMARY_DONE:	Primary detection is completed (Detects
+ *				between SDP and DCP/CDP).
+ * @USB_CHG_STATE_SECONDARY_DONE: Secondary detection is completed (Detects
+ *				  between DCP and CDP).
+ * @USB_CHG_STATE_DETECTED:	USB charger type is determined.
+ */
+enum usb_chg_state {
+	USB_CHG_STATE_UNDEFINED = 0,
+	USB_CHG_STATE_WAIT_FOR_DCD,
+	USB_CHG_STATE_DCD_DONE,
+	USB_CHG_STATE_PRIMARY_DONE,
+	USB_CHG_STATE_SECONDARY_DONE,
+	USB_CHG_STATE_DETECTED,
+};
+
+static const unsigned int rockchip_usb2phy_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_NONE,
+};
+
+struct usb2phy_reg {
+	unsigned int	offset;
+	unsigned int	bitend;
+	unsigned int	bitstart;
+	unsigned int	disable;
+	unsigned int	enable;
+};
+
+/**
+ * struct rockchip_chg_det_reg - usb charger detect registers
+ * @cp_det: charging port detected successfully.
+ * @dcp_det: dedicated charging port detected successfully.
+ * @dp_det: assert data pin connect successfully.
+ * @idm_sink_en: open dm sink curren.
+ * @idp_sink_en: open dp sink current.
+ * @idp_src_en: open dm source current.
+ * @rdm_pdwn_en: open dm pull down resistor.
+ * @vdm_src_en: open dm voltage source.
+ * @vdp_src_en: open dp voltage source.
+ * @opmode: utmi operational mode.
+ */
+struct rockchip_chg_det_reg {
+	struct usb2phy_reg	cp_det;
+	struct usb2phy_reg	dcp_det;
+	struct usb2phy_reg	dp_det;
+	struct usb2phy_reg	idm_sink_en;
+	struct usb2phy_reg	idp_sink_en;
+	struct usb2phy_reg	idp_src_en;
+	struct usb2phy_reg	rdm_pdwn_en;
+	struct usb2phy_reg	vdm_src_en;
+	struct usb2phy_reg	vdp_src_en;
+	struct usb2phy_reg	opmode;
+};
+
+/**
+ * struct rockchip_usb2phy_port_cfg - usb-phy port configuration.
+ * @phy_sus: phy suspend register.
+ * @bvalid_det_en: vbus valid rise detection enable register.
+ * @bvalid_det_st: vbus valid rise detection status register.
+ * @bvalid_det_clr: vbus valid rise detection clear register.
+ * @disfall_en: host disconnect fall edge detection enable.
+ * @disfall_st: host disconnect fall edge detection state.
+ * @disfall_clr: host disconnect fall edge detection clear.
+ * @disrise_en: host disconnect rise edge detection enable.
+ * @disrise_st: host disconnect rise edge detection state.
+ * @disrise_clr: host disconnect rise edge detection clear.
+ * @id_det_en: id detection enable register.
+ * @id_det_st: id detection state register.
+ * @id_det_clr: id detection clear register.
+ * @ls_det_en: linestate detection enable register.
+ * @ls_det_st: linestate detection state register.
+ * @ls_det_clr: linestate detection clear register.
+ * @utmi_avalid: utmi vbus avalid status register.
+ * @utmi_bvalid: utmi vbus bvalid status register.
+ * @utmi_id: utmi id state register.
+ * @utmi_ls: utmi linestate state register.
+ * @utmi_hstdet: utmi host disconnect register.
+ */
+struct rockchip_usb2phy_port_cfg {
+	struct usb2phy_reg	phy_sus;
+	struct usb2phy_reg	bvalid_det_en;
+	struct usb2phy_reg	bvalid_det_st;
+	struct usb2phy_reg	bvalid_det_clr;
+	struct usb2phy_reg      disfall_en;
+	struct usb2phy_reg      disfall_st;
+	struct usb2phy_reg      disfall_clr;
+	struct usb2phy_reg      disrise_en;
+	struct usb2phy_reg      disrise_st;
+	struct usb2phy_reg      disrise_clr;
+	struct usb2phy_reg	id_det_en;
+	struct usb2phy_reg	id_det_st;
+	struct usb2phy_reg	id_det_clr;
+	struct usb2phy_reg	ls_det_en;
+	struct usb2phy_reg	ls_det_st;
+	struct usb2phy_reg	ls_det_clr;
+	struct usb2phy_reg	utmi_avalid;
+	struct usb2phy_reg	utmi_bvalid;
+	struct usb2phy_reg	utmi_id;
+	struct usb2phy_reg	utmi_ls;
+	struct usb2phy_reg	utmi_hstdet;
+};
+
+/**
+ * struct rockchip_usb2phy_cfg - usb-phy configuration.
+ * @reg: the address offset of grf for usb-phy config.
+ * @num_ports: specify how many ports that the phy has.
+ * @phy_tuning: phy default parameters tuning.
+ * @clkout_ctl: keep on/turn off output clk of phy.
+ * @port_cfgs: usb-phy port configurations.
+ * @chg_det: charger detection registers.
+ */
+struct rockchip_usb2phy_cfg {
+	unsigned int	reg;
+	unsigned int	num_ports;
+	int (*phy_tuning)(struct rockchip_usb2phy *rphy);
+	struct usb2phy_reg	clkout_ctl;
+	const struct rockchip_usb2phy_port_cfg	port_cfgs[USB2PHY_NUM_PORTS];
+	const struct rockchip_chg_det_reg	chg_det;
+};
+
+/**
+ * struct rockchip_usb2phy_port - usb-phy port data.
+ * @phy: generic phy.
+ * @port_id: flag for otg port or host port.
+ * @suspended: phy suspended flag.
+ * @vbus_attached: otg device vbus status.
+ * @host_disconnect: usb host disconnect status.
+ * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
+ * @id_irq: IRQ number assigned for ID pin detection.
+ * @ls_irq: IRQ number assigned for linestate detection.
+ * @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate
+ *		 irqs to one irq in otg-port.
+ * @mutex: for register updating in sm_work.
+ * @chg_work: charge detect work.
+ * @otg_sm_work: OTG state machine work.
+ * @sm_work: HOST state machine work.
+ * @port_cfg: port register configuration, assigned by driver data.
+ * @event_nb: hold event notification callback.
+ * @state: define OTG enumeration states before device reset.
+ * @mode: the dr_mode of the controller.
+ */
+struct rockchip_usb2phy_port {
+	struct phy	*phy;
+	unsigned int	port_id;
+	bool		suspended;
+	bool		vbus_attached;
+	bool            host_disconnect;
+	int		bvalid_irq;
+	int		id_irq;
+	int		ls_irq;
+	int		otg_mux_irq;
+	struct mutex	mutex;
+	struct		delayed_work chg_work;
+	struct		delayed_work otg_sm_work;
+	struct		delayed_work sm_work;
+	const struct	rockchip_usb2phy_port_cfg *port_cfg;
+	struct notifier_block	event_nb;
+	enum usb_otg_state	state;
+	enum usb_dr_mode	mode;
+};
+
+/**
+ * struct rockchip_usb2phy - usb2.0 phy driver data.
+ * @dev: pointer to device.
+ * @grf: General Register Files regmap.
+ * @usbgrf: USB General Register Files regmap.
+ * @clk: clock struct of phy input clk.
+ * @clk480m: clock struct of phy output clk.
+ * @clk480m_hw: clock struct of phy output clk management.
+ * @phy_reset: phy reset control.
+ * @chg_state: states involved in USB charger detection.
+ * @chg_type: USB charger types.
+ * @dcd_retries: The retry count used to track Data contact
+ *		 detection process.
+ * @edev: extcon device for notification registration
+ * @irq: muxed interrupt for single irq configuration
+ * @phy_cfg: phy register configuration, assigned by driver data.
+ * @ports: phy port instance.
+ */
+struct rockchip_usb2phy {
+	struct device	*dev;
+	struct regmap	*grf;
+	struct regmap	*usbgrf;
+	struct clk	*clk;
+	struct clk	*clk480m;
+	struct clk_hw	clk480m_hw;
+	struct reset_control	*phy_reset;
+	enum usb_chg_state	chg_state;
+	enum power_supply_type	chg_type;
+	u8			dcd_retries;
+	struct extcon_dev	*edev;
+	int			irq;
+	const struct rockchip_usb2phy_cfg	*phy_cfg;
+	struct rockchip_usb2phy_port	ports[USB2PHY_NUM_PORTS];
+};
+
+static inline struct regmap *get_reg_base(struct rockchip_usb2phy *rphy)
+{
+	return rphy->usbgrf == NULL ? rphy->grf : rphy->usbgrf;
+}
+
+static inline int property_enable(struct regmap *base,
+				  const struct usb2phy_reg *reg, bool en)
+{
+	unsigned int val, mask, tmp;
+
+	tmp = en ? reg->enable : reg->disable;
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+	return regmap_write(base, reg->offset, val);
+}
+
+static inline bool property_enabled(struct regmap *base,
+				    const struct usb2phy_reg *reg)
+{
+	int ret;
+	unsigned int tmp, orig;
+	unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
+
+	ret = regmap_read(base, reg->offset, &orig);
+	if (ret)
+		return false;
+
+	tmp = (orig & mask) >> reg->bitstart;
+	return tmp != reg->disable;
+}
+
+static int rockchip_usb2phy_reset(struct rockchip_usb2phy *rphy)
+{
+	int ret;
+
+	ret = reset_control_assert(rphy->phy_reset);
+	if (ret)
+		return ret;
+
+	udelay(10);
+
+	ret = reset_control_deassert(rphy->phy_reset);
+	if (ret)
+		return ret;
+
+	usleep_range(100, 200);
+
+	return 0;
+}
+
+static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	struct regmap *base = get_reg_base(rphy);
+	int ret;
+
+	/* turn on 480m clk output if it is off */
+	if (!property_enabled(base, &rphy->phy_cfg->clkout_ctl)) {
+		ret = property_enable(base, &rphy->phy_cfg->clkout_ctl, true);
+		if (ret)
+			return ret;
+
+		/* waiting for the clk become stable */
+		usleep_range(1200, 1300);
+	}
+
+	return 0;
+}
+
+static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	struct regmap *base = get_reg_base(rphy);
+
+	/* turn off 480m clk output */
+	property_enable(base, &rphy->phy_cfg->clkout_ctl, false);
+}
+
+static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	struct regmap *base = get_reg_base(rphy);
+
+	return property_enabled(base, &rphy->phy_cfg->clkout_ctl);
+}
+
+static unsigned long
+rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
+				     unsigned long parent_rate)
+{
+	return 480000000;
+}
+
+static const struct clk_ops rockchip_usb2phy_clkout_ops = {
+	.prepare = rockchip_usb2phy_clk480m_prepare,
+	.unprepare = rockchip_usb2phy_clk480m_unprepare,
+	.is_prepared = rockchip_usb2phy_clk480m_prepared,
+	.recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
+};
+
+static void rockchip_usb2phy_clk480m_unregister(void *data)
+{
+	struct rockchip_usb2phy *rphy = data;
+
+	of_clk_del_provider(rphy->dev->of_node);
+	clk_unregister(rphy->clk480m);
+}
+
+static int
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+	struct device_node *node = rphy->dev->of_node;
+	struct clk_init_data init;
+	const char *clk_name;
+	int ret = 0;
+
+	init.flags = 0;
+	init.name = "clk_usbphy_480m";
+	init.ops = &rockchip_usb2phy_clkout_ops;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	if (rphy->clk) {
+		clk_name = __clk_get_name(rphy->clk);
+		init.parent_names = &clk_name;
+		init.num_parents = 1;
+	} else {
+		init.parent_names = NULL;
+		init.num_parents = 0;
+	}
+
+	rphy->clk480m_hw.init = &init;
+
+	/* register the clock */
+	rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
+	if (IS_ERR(rphy->clk480m)) {
+		ret = PTR_ERR(rphy->clk480m);
+		goto err_ret;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
+	if (ret < 0)
+		goto err_clk_provider;
+
+	return devm_add_action_or_reset(rphy->dev, rockchip_usb2phy_clk480m_unregister, rphy);
+
+err_clk_provider:
+	clk_unregister(rphy->clk480m);
+err_ret:
+	return ret;
+}
+
+static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
+{
+	int ret;
+	struct device_node *node = rphy->dev->of_node;
+	struct extcon_dev *edev;
+
+	if (of_property_read_bool(node, "extcon")) {
+		edev = extcon_get_edev_by_phandle(rphy->dev, 0);
+		if (IS_ERR(edev)) {
+			if (PTR_ERR(edev) != -EPROBE_DEFER)
+				dev_err(rphy->dev, "Invalid or missing extcon\n");
+			return PTR_ERR(edev);
+		}
+	} else {
+		/* Initialize extcon device */
+		edev = devm_extcon_dev_allocate(rphy->dev,
+						rockchip_usb2phy_extcon_cable);
+
+		if (IS_ERR(edev))
+			return -ENOMEM;
+
+		ret = devm_extcon_dev_register(rphy->dev, edev);
+		if (ret) {
+			dev_err(rphy->dev, "failed to register extcon device\n");
+			return ret;
+		}
+	}
+
+	rphy->edev = edev;
+
+	return 0;
+}
+
+static int rockchip_usb2phy_enable_host_disc_irq(struct rockchip_usb2phy *rphy,
+						 struct rockchip_usb2phy_port *rport,
+						 bool en)
+{
+	int ret;
+
+	ret = property_enable(rphy->grf, &rport->port_cfg->disfall_clr, true);
+	if (ret)
+		return ret;
+
+	ret = property_enable(rphy->grf, &rport->port_cfg->disfall_en, en);
+	if (ret)
+		return ret;
+
+	ret = property_enable(rphy->grf, &rport->port_cfg->disrise_clr, true);
+	if (ret)
+		return ret;
+
+	return property_enable(rphy->grf, &rport->port_cfg->disrise_en, en);
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret = 0;
+
+	mutex_lock(&rport->mutex);
+
+	if (rport->port_id == USB2PHY_PORT_OTG) {
+		if (rport->mode != USB_DR_MODE_HOST &&
+		    rport->mode != USB_DR_MODE_UNKNOWN) {
+			/* clear bvalid status and enable bvalid detect irq */
+			ret = property_enable(rphy->grf,
+					      &rport->port_cfg->bvalid_det_clr,
+					      true);
+			if (ret)
+				goto out;
+
+			ret = property_enable(rphy->grf,
+					      &rport->port_cfg->bvalid_det_en,
+					      true);
+			if (ret)
+				goto out;
+
+			/* clear id status and enable id detect irq */
+			ret = property_enable(rphy->grf,
+					      &rport->port_cfg->id_det_clr,
+					      true);
+			if (ret)
+				goto out;
+
+			ret = property_enable(rphy->grf,
+					      &rport->port_cfg->id_det_en,
+					      true);
+			if (ret)
+				goto out;
+
+			schedule_delayed_work(&rport->otg_sm_work,
+					      OTG_SCHEDULE_DELAY * 3);
+		} else {
+			/* If OTG works in host only mode, do nothing. */
+			dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
+		}
+	} else if (rport->port_id == USB2PHY_PORT_HOST) {
+		if (rport->port_cfg->disfall_en.offset) {
+			rport->host_disconnect = true;
+			ret = rockchip_usb2phy_enable_host_disc_irq(rphy, rport, true);
+			if (ret) {
+				dev_err(rphy->dev, "failed to enable disconnect irq\n");
+				goto out;
+			}
+		}
+
+		/* clear linestate and enable linestate detect irq */
+		ret = property_enable(rphy->grf,
+				      &rport->port_cfg->ls_det_clr, true);
+		if (ret)
+			goto out;
+
+		ret = property_enable(rphy->grf,
+				      &rport->port_cfg->ls_det_en, true);
+		if (ret)
+			goto out;
+
+		schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+	}
+
+out:
+	mutex_unlock(&rport->mutex);
+	return ret;
+}
+
+static int rockchip_usb2phy_power_on(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	struct regmap *base = get_reg_base(rphy);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port power on\n");
+
+	if (!rport->suspended)
+		return 0;
+
+	ret = clk_prepare_enable(rphy->clk480m);
+	if (ret)
+		return ret;
+
+	ret = property_enable(base, &rport->port_cfg->phy_sus, false);
+	if (ret) {
+		clk_disable_unprepare(rphy->clk480m);
+		return ret;
+	}
+
+	/*
+	 * For rk3588, it needs to reset phy when exit from
+	 * suspend mode with common_on_n 1'b1(aka REFCLK_LOGIC,
+	 * Bias, and PLL blocks are powered down) for lower
+	 * power consumption. If you don't want to reset phy,
+	 * please keep the common_on_n 1'b0 to set these blocks
+	 * remain powered.
+	 */
+	ret = rockchip_usb2phy_reset(rphy);
+	if (ret)
+		return ret;
+
+	/* waiting for the utmi_clk to become stable */
+	usleep_range(1500, 2000);
+
+	rport->suspended = false;
+	return 0;
+}
+
+static int rockchip_usb2phy_power_off(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	struct regmap *base = get_reg_base(rphy);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port power off\n");
+
+	if (rport->suspended)
+		return 0;
+
+	ret = property_enable(base, &rport->port_cfg->phy_sus, true);
+	if (ret)
+		return ret;
+
+	rport->suspended = true;
+	clk_disable_unprepare(rphy->clk480m);
+
+	return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+
+	if (rport->port_id == USB2PHY_PORT_OTG &&
+	    rport->mode != USB_DR_MODE_HOST &&
+	    rport->mode != USB_DR_MODE_UNKNOWN) {
+		cancel_delayed_work_sync(&rport->otg_sm_work);
+		cancel_delayed_work_sync(&rport->chg_work);
+	} else if (rport->port_id == USB2PHY_PORT_HOST)
+		cancel_delayed_work_sync(&rport->sm_work);
+
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb2phy_ops = {
+	.init		= rockchip_usb2phy_init,
+	.exit		= rockchip_usb2phy_exit,
+	.power_on	= rockchip_usb2phy_power_on,
+	.power_off	= rockchip_usb2phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port,
+			     otg_sm_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	static unsigned int cable;
+	unsigned long delay;
+	bool vbus_attach, sch_work, notify_charger;
+
+	vbus_attach = property_enabled(rphy->grf,
+				       &rport->port_cfg->utmi_bvalid);
+
+	sch_work = false;
+	notify_charger = false;
+	delay = OTG_SCHEDULE_DELAY;
+	dev_dbg(&rport->phy->dev, "%s otg sm work\n",
+		usb_otg_state_string(rport->state));
+
+	switch (rport->state) {
+	case OTG_STATE_UNDEFINED:
+		rport->state = OTG_STATE_B_IDLE;
+		if (!vbus_attach)
+			rockchip_usb2phy_power_off(rport->phy);
+		fallthrough;
+	case OTG_STATE_B_IDLE:
+		if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) {
+			dev_dbg(&rport->phy->dev, "usb otg host connect\n");
+			rport->state = OTG_STATE_A_HOST;
+			rockchip_usb2phy_power_on(rport->phy);
+			return;
+		} else if (vbus_attach) {
+			dev_dbg(&rport->phy->dev, "vbus_attach\n");
+			switch (rphy->chg_state) {
+			case USB_CHG_STATE_UNDEFINED:
+				schedule_delayed_work(&rport->chg_work, 0);
+				return;
+			case USB_CHG_STATE_DETECTED:
+				switch (rphy->chg_type) {
+				case POWER_SUPPLY_TYPE_USB:
+					dev_dbg(&rport->phy->dev, "sdp cable is connected\n");
+					rockchip_usb2phy_power_on(rport->phy);
+					rport->state = OTG_STATE_B_PERIPHERAL;
+					notify_charger = true;
+					sch_work = true;
+					cable = EXTCON_CHG_USB_SDP;
+					break;
+				case POWER_SUPPLY_TYPE_USB_DCP:
+					dev_dbg(&rport->phy->dev, "dcp cable is connected\n");
+					rockchip_usb2phy_power_off(rport->phy);
+					notify_charger = true;
+					sch_work = true;
+					cable = EXTCON_CHG_USB_DCP;
+					break;
+				case POWER_SUPPLY_TYPE_USB_CDP:
+					dev_dbg(&rport->phy->dev, "cdp cable is connected\n");
+					rockchip_usb2phy_power_on(rport->phy);
+					rport->state = OTG_STATE_B_PERIPHERAL;
+					notify_charger = true;
+					sch_work = true;
+					cable = EXTCON_CHG_USB_CDP;
+					break;
+				default:
+					break;
+				}
+				break;
+			default:
+				break;
+			}
+		} else {
+			notify_charger = true;
+			rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+			rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+		}
+
+		if (rport->vbus_attached != vbus_attach) {
+			rport->vbus_attached = vbus_attach;
+
+			if (notify_charger && rphy->edev) {
+				extcon_set_state_sync(rphy->edev,
+							cable, vbus_attach);
+				if (cable == EXTCON_CHG_USB_SDP)
+					extcon_set_state_sync(rphy->edev,
+							      EXTCON_USB,
+							      vbus_attach);
+			}
+		}
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!vbus_attach) {
+			dev_dbg(&rport->phy->dev, "usb disconnect\n");
+			rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+			rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+			rport->state = OTG_STATE_B_IDLE;
+			delay = 0;
+			rockchip_usb2phy_power_off(rport->phy);
+		}
+		sch_work = true;
+		break;
+	case OTG_STATE_A_HOST:
+		if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) == 0) {
+			dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
+			rport->state = OTG_STATE_B_IDLE;
+			rockchip_usb2phy_power_off(rport->phy);
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (sch_work)
+		schedule_delayed_work(&rport->otg_sm_work, delay);
+}
+
+static const char *chg_to_string(enum power_supply_type chg_type)
+{
+	switch (chg_type) {
+	case POWER_SUPPLY_TYPE_USB:
+		return "USB_SDP_CHARGER";
+	case POWER_SUPPLY_TYPE_USB_DCP:
+		return "USB_DCP_CHARGER";
+	case POWER_SUPPLY_TYPE_USB_CDP:
+		return "USB_CDP_CHARGER";
+	default:
+		return "INVALID_CHARGER";
+	}
+}
+
+static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy,
+				    bool en)
+{
+	struct regmap *base = get_reg_base(rphy);
+
+	property_enable(base, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
+	property_enable(base, &rphy->phy_cfg->chg_det.idp_src_en, en);
+}
+
+static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy,
+					    bool en)
+{
+	struct regmap *base = get_reg_base(rphy);
+
+	property_enable(base, &rphy->phy_cfg->chg_det.vdp_src_en, en);
+	property_enable(base, &rphy->phy_cfg->chg_det.idm_sink_en, en);
+}
+
+static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy,
+					      bool en)
+{
+	struct regmap *base = get_reg_base(rphy);
+
+	property_enable(base, &rphy->phy_cfg->chg_det.vdm_src_en, en);
+	property_enable(base, &rphy->phy_cfg->chg_det.idp_sink_en, en);
+}
+
+#define CHG_DCD_POLL_TIME	(100 * HZ / 1000)
+#define CHG_DCD_MAX_RETRIES	6
+#define CHG_PRIMARY_DET_TIME	(40 * HZ / 1000)
+#define CHG_SECONDARY_DET_TIME	(40 * HZ / 1000)
+static void rockchip_chg_detect_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port, chg_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	struct regmap *base = get_reg_base(rphy);
+	bool is_dcd, tmout, vout;
+	unsigned long delay;
+
+	dev_dbg(&rport->phy->dev, "chg detection work state = %d\n",
+		rphy->chg_state);
+	switch (rphy->chg_state) {
+	case USB_CHG_STATE_UNDEFINED:
+		if (!rport->suspended)
+			rockchip_usb2phy_power_off(rport->phy);
+		/* put the controller in non-driving mode */
+		property_enable(base, &rphy->phy_cfg->chg_det.opmode, false);
+		/* Start DCD processing stage 1 */
+		rockchip_chg_enable_dcd(rphy, true);
+		rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
+		rphy->dcd_retries = 0;
+		delay = CHG_DCD_POLL_TIME;
+		break;
+	case USB_CHG_STATE_WAIT_FOR_DCD:
+		/* get data contact detection status */
+		is_dcd = property_enabled(rphy->grf,
+					  &rphy->phy_cfg->chg_det.dp_det);
+		tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES;
+		/* stage 2 */
+		if (is_dcd || tmout) {
+			/* stage 4 */
+			/* Turn off DCD circuitry */
+			rockchip_chg_enable_dcd(rphy, false);
+			/* Voltage Source on DP, Probe on DM */
+			rockchip_chg_enable_primary_det(rphy, true);
+			delay = CHG_PRIMARY_DET_TIME;
+			rphy->chg_state = USB_CHG_STATE_DCD_DONE;
+		} else {
+			/* stage 3 */
+			delay = CHG_DCD_POLL_TIME;
+		}
+		break;
+	case USB_CHG_STATE_DCD_DONE:
+		vout = property_enabled(rphy->grf,
+					&rphy->phy_cfg->chg_det.cp_det);
+		rockchip_chg_enable_primary_det(rphy, false);
+		if (vout) {
+			/* Voltage Source on DM, Probe on DP  */
+			rockchip_chg_enable_secondary_det(rphy, true);
+			delay = CHG_SECONDARY_DET_TIME;
+			rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
+		} else {
+			if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) {
+				/* floating charger found */
+				rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+				rphy->chg_state = USB_CHG_STATE_DETECTED;
+				delay = 0;
+			} else {
+				rphy->chg_type = POWER_SUPPLY_TYPE_USB;
+				rphy->chg_state = USB_CHG_STATE_DETECTED;
+				delay = 0;
+			}
+		}
+		break;
+	case USB_CHG_STATE_PRIMARY_DONE:
+		vout = property_enabled(rphy->grf,
+					&rphy->phy_cfg->chg_det.dcp_det);
+		/* Turn off voltage source */
+		rockchip_chg_enable_secondary_det(rphy, false);
+		if (vout)
+			rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+		else
+			rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP;
+		fallthrough;
+	case USB_CHG_STATE_SECONDARY_DONE:
+		rphy->chg_state = USB_CHG_STATE_DETECTED;
+		fallthrough;
+	case USB_CHG_STATE_DETECTED:
+		/* put the controller in normal mode */
+		property_enable(base, &rphy->phy_cfg->chg_det.opmode, true);
+		rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+		dev_dbg(&rport->phy->dev, "charger = %s\n",
+			 chg_to_string(rphy->chg_type));
+		return;
+	default:
+		return;
+	}
+
+	schedule_delayed_work(&rport->chg_work, delay);
+}
+
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * devices is disconnect or not. Besides, we do not need care it is FS/LS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
+ * some clk related APIs, so do not invoke it from interrupt context directly.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port, sm_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	unsigned int sh, ul, uhd, state;
+	unsigned int ul_mask, uhd_mask;
+	int ret;
+
+	mutex_lock(&rport->mutex);
+
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
+	if (ret < 0)
+		goto next_schedule;
+
+	ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
+			  rport->port_cfg->utmi_ls.bitstart);
+
+	if (rport->port_cfg->utmi_hstdet.offset) {
+		ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd);
+		if (ret < 0)
+			goto next_schedule;
+
+		uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+				   rport->port_cfg->utmi_hstdet.bitstart);
+
+		sh = rport->port_cfg->utmi_hstdet.bitend -
+		     rport->port_cfg->utmi_hstdet.bitstart + 1;
+		/* stitch on utmi_ls and utmi_hstdet as phy state */
+		state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+			(((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+	} else {
+		state = ((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << 1 |
+			rport->host_disconnect;
+	}
+
+	switch (state) {
+	case PHY_STATE_HS_ONLINE:
+		dev_dbg(&rport->phy->dev, "HS online\n");
+		break;
+	case PHY_STATE_FS_LS_ONLINE:
+		/*
+		 * For FS/LS device, the online state share with connect state
+		 * from utmi_ls and utmi_hstdet register, so we distinguish
+		 * them via suspended flag.
+		 *
+		 * Plus, there are two cases, one is D- Line pull-up, and D+
+		 * line pull-down, the state is 4; another is D+ line pull-up,
+		 * and D- line pull-down, the state is 2.
+		 */
+		if (!rport->suspended) {
+			/* D- line pull-up, D+ line pull-down */
+			dev_dbg(&rport->phy->dev, "FS/LS online\n");
+			break;
+		}
+		fallthrough;
+	case PHY_STATE_CONNECT:
+		if (rport->suspended) {
+			dev_dbg(&rport->phy->dev, "Connected\n");
+			rockchip_usb2phy_power_on(rport->phy);
+			rport->suspended = false;
+		} else {
+			/* D+ line pull-up, D- line pull-down */
+			dev_dbg(&rport->phy->dev, "FS/LS online\n");
+		}
+		break;
+	case PHY_STATE_DISCONNECT:
+		if (!rport->suspended) {
+			dev_dbg(&rport->phy->dev, "Disconnected\n");
+			rockchip_usb2phy_power_off(rport->phy);
+			rport->suspended = true;
+		}
+
+		/*
+		 * activate the linestate detection to get the next device
+		 * plug-in irq.
+		 */
+		property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
+		property_enable(rphy->grf, &rport->port_cfg->ls_det_en, true);
+
+		/*
+		 * we don't need to rearm the delayed work when the phy port
+		 * is suspended.
+		 */
+		mutex_unlock(&rport->mutex);
+		return;
+	default:
+		dev_dbg(&rport->phy->dev, "unknown phy state\n");
+		break;
+	}
+
+next_schedule:
+	mutex_unlock(&rport->mutex);
+	schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
+
+static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy->grf, &rport->port_cfg->ls_det_st))
+		return IRQ_NONE;
+
+	mutex_lock(&rport->mutex);
+
+	/* disable linestate detect irq and clear its status */
+	property_enable(rphy->grf, &rport->port_cfg->ls_det_en, false);
+	property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
+
+	mutex_unlock(&rport->mutex);
+
+	/*
+	 * In this case for host phy port, a new device is plugged in,
+	 * meanwhile, if the phy port is suspended, we need rearm the work to
+	 * resume it and mange its states; otherwise, we do nothing about that.
+	 */
+	if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
+		rockchip_usb2phy_sm_work(&rport->sm_work.work);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
+		return IRQ_NONE;
+
+	/* clear bvalid detect irq pending status */
+	property_enable(rphy->grf, &rport->port_cfg->bvalid_det_clr, true);
+
+	rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_id_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	bool id;
+
+	if (!property_enabled(rphy->grf, &rport->port_cfg->id_det_st))
+		return IRQ_NONE;
+
+	/* clear id detect irq pending status */
+	property_enable(rphy->grf, &rport->port_cfg->id_det_clr, true);
+
+	id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+	extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
+{
+	irqreturn_t ret = IRQ_NONE;
+
+	ret |= rockchip_usb2phy_bvalid_irq(irq, data);
+	ret |= rockchip_usb2phy_id_irq(irq, data);
+
+	return ret;
+}
+
+static irqreturn_t rockchip_usb2phy_host_disc_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy->grf, &rport->port_cfg->disfall_st) &&
+	    !property_enabled(rphy->grf, &rport->port_cfg->disrise_st))
+		return IRQ_NONE;
+
+	mutex_lock(&rport->mutex);
+
+	/* clear disconnect fall or rise detect irq pending status */
+	if (property_enabled(rphy->grf, &rport->port_cfg->disfall_st)) {
+		property_enable(rphy->grf, &rport->port_cfg->disfall_clr, true);
+		rport->host_disconnect = false;
+	} else if (property_enabled(rphy->grf, &rport->port_cfg->disrise_st)) {
+		property_enable(rphy->grf, &rport->port_cfg->disrise_clr, true);
+		rport->host_disconnect = true;
+	}
+
+	mutex_unlock(&rport->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy *rphy = data;
+	struct rockchip_usb2phy_port *rport;
+	irqreturn_t ret = IRQ_NONE;
+	unsigned int index;
+
+	for (index = 0; index < rphy->phy_cfg->num_ports; index++) {
+		rport = &rphy->ports[index];
+		if (!rport->phy)
+			continue;
+
+		if (rport->port_id == USB2PHY_PORT_HOST &&
+		    rport->port_cfg->disfall_en.offset)
+			ret |= rockchip_usb2phy_host_disc_irq(irq, rport);
+
+		switch (rport->port_id) {
+		case USB2PHY_PORT_OTG:
+			if (rport->mode != USB_DR_MODE_HOST &&
+			    rport->mode != USB_DR_MODE_UNKNOWN)
+				ret |= rockchip_usb2phy_otg_mux_irq(irq, rport);
+			break;
+		case USB2PHY_PORT_HOST:
+			ret |= rockchip_usb2phy_linestate_irq(irq, rport);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int rockchip_usb2phy_port_irq_init(struct rockchip_usb2phy *rphy,
+					  struct rockchip_usb2phy_port *rport,
+					  struct device_node *child_np)
+{
+	int ret;
+
+	/*
+	 * If the usb2 phy used combined irq for otg and host port,
+	 * don't need to init otg and host port irq separately.
+	 */
+	if (rphy->irq > 0)
+		return 0;
+
+	switch (rport->port_id) {
+	case USB2PHY_PORT_HOST:
+		rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+		if (rport->ls_irq < 0) {
+			dev_err(rphy->dev, "no linestate irq provided\n");
+			return rport->ls_irq;
+		}
+
+		ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+						rockchip_usb2phy_linestate_irq,
+						IRQF_ONESHOT,
+						"rockchip_usb2phy", rport);
+		if (ret) {
+			dev_err(rphy->dev, "failed to request linestate irq handle\n");
+			return ret;
+		}
+		break;
+	case USB2PHY_PORT_OTG:
+		/*
+		 * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
+		 * interrupts muxed together, so probe the otg-mux interrupt first,
+		 * if not found, then look for the regular interrupts one by one.
+		 */
+		rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
+		if (rport->otg_mux_irq > 0) {
+			ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
+							NULL,
+							rockchip_usb2phy_otg_mux_irq,
+							IRQF_ONESHOT,
+							"rockchip_usb2phy_otg",
+							rport);
+			if (ret) {
+				dev_err(rphy->dev,
+					"failed to request otg-mux irq handle\n");
+				return ret;
+			}
+		} else {
+			rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+			if (rport->bvalid_irq < 0) {
+				dev_err(rphy->dev, "no vbus valid irq provided\n");
+				ret = rport->bvalid_irq;
+				return ret;
+			}
+
+			ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
+							NULL,
+							rockchip_usb2phy_bvalid_irq,
+							IRQF_ONESHOT,
+							"rockchip_usb2phy_bvalid",
+							rport);
+			if (ret) {
+				dev_err(rphy->dev,
+					"failed to request otg-bvalid irq handle\n");
+				return ret;
+			}
+
+			rport->id_irq = of_irq_get_byname(child_np, "otg-id");
+			if (rport->id_irq < 0) {
+				dev_err(rphy->dev, "no otg-id irq provided\n");
+				ret = rport->id_irq;
+				return ret;
+			}
+
+			ret = devm_request_threaded_irq(rphy->dev, rport->id_irq,
+							NULL,
+							rockchip_usb2phy_id_irq,
+							IRQF_ONESHOT,
+							"rockchip_usb2phy_id",
+							rport);
+			if (ret) {
+				dev_err(rphy->dev,
+					"failed to request otg-id irq handle\n");
+				return ret;
+			}
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
+					   struct rockchip_usb2phy_port *rport,
+					   struct device_node *child_np)
+{
+	int ret;
+
+	rport->port_id = USB2PHY_PORT_HOST;
+	rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
+	rport->suspended = true;
+
+	mutex_init(&rport->mutex);
+	INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
+
+	ret = rockchip_usb2phy_port_irq_init(rphy, rport, child_np);
+	if (ret) {
+		dev_err(rphy->dev, "failed to setup host irq\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_otg_event(struct notifier_block *nb,
+			      unsigned long event, void *ptr)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(nb, struct rockchip_usb2phy_port, event_nb);
+
+	schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY);
+
+	return NOTIFY_DONE;
+}
+
+static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+					  struct rockchip_usb2phy_port *rport,
+					  struct device_node *child_np)
+{
+	int ret, id;
+
+	rport->port_id = USB2PHY_PORT_OTG;
+	rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
+	rport->state = OTG_STATE_UNDEFINED;
+
+	/*
+	 * set suspended flag to true, but actually don't
+	 * put phy in suspend mode, it aims to enable usb
+	 * phy and clock in power_on() called by usb controller
+	 * driver during probe.
+	 */
+	rport->suspended = true;
+	rport->vbus_attached = false;
+
+	mutex_init(&rport->mutex);
+
+	rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
+	if (rport->mode == USB_DR_MODE_HOST ||
+	    rport->mode == USB_DR_MODE_UNKNOWN) {
+		ret = 0;
+		goto out;
+	}
+
+	INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
+	INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
+
+	ret = rockchip_usb2phy_port_irq_init(rphy, rport, child_np);
+	if (ret) {
+		dev_err(rphy->dev, "failed to init irq for host port\n");
+		goto out;
+	}
+
+	if (!IS_ERR(rphy->edev)) {
+		rport->event_nb.notifier_call = rockchip_otg_event;
+
+		ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
+					EXTCON_USB_HOST, &rport->event_nb);
+		if (ret) {
+			dev_err(rphy->dev, "register USB HOST notifier failed\n");
+			goto out;
+		}
+
+		if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
+			/* do initial sync of usb state */
+			id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+			extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
+		}
+	}
+
+out:
+	return ret;
+}
+
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct phy_provider *provider;
+	struct rockchip_usb2phy *rphy;
+	const struct rockchip_usb2phy_cfg *phy_cfgs;
+	unsigned int reg;
+	int index, ret;
+
+	rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
+	if (!rphy)
+		return -ENOMEM;
+
+	if (!dev->parent || !dev->parent->of_node) {
+		rphy->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbgrf");
+		if (IS_ERR(rphy->grf)) {
+			dev_err(dev, "failed to locate usbgrf\n");
+			return PTR_ERR(rphy->grf);
+		}
+	}
+
+	else {
+		rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+		if (IS_ERR(rphy->grf))
+			return PTR_ERR(rphy->grf);
+	}
+
+	if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) {
+		rphy->usbgrf =
+			syscon_regmap_lookup_by_phandle(dev->of_node,
+							"rockchip,usbgrf");
+		if (IS_ERR(rphy->usbgrf))
+			return PTR_ERR(rphy->usbgrf);
+	} else {
+		rphy->usbgrf = NULL;
+	}
+
+	if (of_property_read_u32_index(np, "reg", 0, &reg)) {
+		dev_err(dev, "the reg property is not assigned in %pOFn node\n",
+			np);
+		return -EINVAL;
+	}
+
+	/* support address_cells=2 */
+	if (of_property_count_u32_elems(np, "reg") > 2 && reg == 0) {
+		if (of_property_read_u32_index(np, "reg", 1, &reg)) {
+			dev_err(dev, "the reg property is not assigned in %pOFn node\n",
+				np);
+			return -EINVAL;
+		}
+	}
+
+	rphy->dev = dev;
+	phy_cfgs = device_get_match_data(dev);
+	rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+	rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+	rphy->irq = platform_get_irq_optional(pdev, 0);
+	platform_set_drvdata(pdev, rphy);
+
+	if (!phy_cfgs)
+		return dev_err_probe(dev, -EINVAL, "phy configs are not assigned!\n");
+
+	ret = rockchip_usb2phy_extcon_register(rphy);
+	if (ret)
+		return ret;
+
+	/* find out a proper config which can be matched with dt. */
+	index = 0;
+	do {
+		if (phy_cfgs[index].reg == reg) {
+			rphy->phy_cfg = &phy_cfgs[index];
+			break;
+		}
+
+		++index;
+	} while (phy_cfgs[index].reg);
+
+	if (!rphy->phy_cfg) {
+		dev_err(dev, "could not find phy config for reg=0x%08x\n", reg);
+		return -EINVAL;
+	}
+
+	rphy->phy_reset = devm_reset_control_get_optional(dev, "phy");
+	if (IS_ERR(rphy->phy_reset))
+		return PTR_ERR(rphy->phy_reset);
+
+	rphy->clk = devm_clk_get_optional_enabled(dev, "phyclk");
+	if (IS_ERR(rphy->clk)) {
+		return dev_err_probe(&pdev->dev, PTR_ERR(rphy->clk),
+				     "failed to get phyclk\n");
+	}
+
+	ret = rockchip_usb2phy_clk480m_register(rphy);
+	if (ret) {
+		dev_err(dev, "failed to register 480m output clock\n");
+		return ret;
+	}
+
+	if (rphy->phy_cfg->phy_tuning) {
+		ret = rphy->phy_cfg->phy_tuning(rphy);
+		if (ret)
+			return ret;
+	}
+
+	index = 0;
+	for_each_available_child_of_node(np, child_np) {
+		struct rockchip_usb2phy_port *rport = &rphy->ports[index];
+		struct phy *phy;
+
+		/* This driver aims to support both otg-port and host-port */
+		if (!of_node_name_eq(child_np, "host-port") &&
+		    !of_node_name_eq(child_np, "otg-port"))
+			goto next_child;
+
+		phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
+		if (IS_ERR(phy)) {
+			dev_err_probe(dev, PTR_ERR(phy), "failed to create phy\n");
+			ret = PTR_ERR(phy);
+			goto put_child;
+		}
+
+		rport->phy = phy;
+		phy_set_drvdata(rport->phy, rport);
+
+		/* initialize otg/host port separately */
+		if (of_node_name_eq(child_np, "host-port")) {
+			ret = rockchip_usb2phy_host_port_init(rphy, rport,
+							      child_np);
+			if (ret)
+				goto put_child;
+		} else {
+			ret = rockchip_usb2phy_otg_port_init(rphy, rport,
+							     child_np);
+			if (ret)
+				goto put_child;
+		}
+
+next_child:
+		/* to prevent out of boundary */
+		if (++index >= rphy->phy_cfg->num_ports) {
+			of_node_put(child_np);
+			break;
+		}
+	}
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	if (rphy->irq > 0) {
+		ret = devm_request_threaded_irq(rphy->dev, rphy->irq, NULL,
+						rockchip_usb2phy_irq,
+						IRQF_ONESHOT,
+						"rockchip_usb2phy",
+						rphy);
+		if (ret) {
+			dev_err(rphy->dev,
+				"failed to request usb2phy irq handle\n");
+			goto put_child;
+		}
+	}
+
+	return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+	of_node_put(child_np);
+	return ret;
+}
+
+static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
+{
+	int ret;
+	bool usb3otg = false;
+	/*
+	 * utmi_termselect = 1'b1 (en FS terminations)
+	 * utmi_xcvrselect = 2'b01 (FS transceiver)
+	 */
+	int suspend_cfg = 0x14;
+
+	if (rphy->phy_cfg->reg == 0x0000 || rphy->phy_cfg->reg == 0x4000) {
+		/* USB2 config for USB3_0 and USB3_1 */
+		suspend_cfg |= 0x01; /* utmi_opmode = 2'b01 (no-driving) */
+		usb3otg = true;
+	} else if (rphy->phy_cfg->reg == 0x8000 || rphy->phy_cfg->reg == 0xc000) {
+		/* USB2 config for USB2_0 and USB2_1 */
+		suspend_cfg |= 0x00; /* utmi_opmode = 2'b00 (normal) */
+	} else {
+		return -EINVAL;
+	}
+
+	/* Deassert SIDDQ to power on analog block */
+	ret = regmap_write(rphy->grf, 0x0008, GENMASK(29, 29) | 0x0000);
+	if (ret)
+		return ret;
+
+	/* Do reset after exit IDDQ mode */
+	ret = rockchip_usb2phy_reset(rphy);
+	if (ret)
+		return ret;
+
+	/* suspend configuration */
+	ret |= regmap_write(rphy->grf, 0x000c, GENMASK(20, 16) | suspend_cfg);
+
+	/* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
+	ret |= regmap_write(rphy->grf, 0x0004, GENMASK(27, 24) | 0x0900);
+
+	/* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
+	ret |= regmap_write(rphy->grf, 0x0008, GENMASK(20, 19) | 0x0010);
+
+	if (!usb3otg)
+		return ret;
+
+	/* Pullup iddig pin for USB3_0 OTG mode */
+	ret |= regmap_write(rphy->grf, 0x0010, GENMASK(17, 16) | 0x0003);
+
+	return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
+	{
+		.reg = 0x760,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0768, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0760, 15, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0680, 3, 3, 0, 1 },
+				.bvalid_det_st	= { 0x0690, 3, 3, 0, 1 },
+				.bvalid_det_clr	= { 0x06a0, 3, 3, 0, 1 },
+				.id_det_en	= { 0x0680, 6, 5, 0, 3 },
+				.id_det_st	= { 0x0690, 6, 5, 0, 3 },
+				.id_det_clr	= { 0x06a0, 6, 5, 0, 3 },
+				.ls_det_en	= { 0x0680, 2, 2, 0, 1 },
+				.ls_det_st	= { 0x0690, 2, 2, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 2, 2, 0, 1 },
+				.utmi_bvalid	= { 0x0480, 4, 4, 0, 1 },
+				.utmi_id	= { 0x0480, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x0480, 3, 2, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0764, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0680, 4, 4, 0, 1 },
+				.ls_det_st	= { 0x0690, 4, 4, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 4, 4, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0760, 3, 0, 5, 1 },
+			.cp_det		= { 0x0884, 4, 4, 0, 1 },
+			.dcp_det	= { 0x0884, 3, 3, 0, 1 },
+			.dp_det		= { 0x0884, 5, 5, 0, 1 },
+			.idm_sink_en	= { 0x0768, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0768, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0768, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0768, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0768, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0768, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg = 0x800,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0808, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x800, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0684, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0694, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x06a4, 0, 0, 0, 1 }
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x804, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0684, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0694, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x06a4, 1, 1, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x3020, 3, 2, 0, 3 },
+				.bvalid_det_st	= { 0x3024, 3, 2, 0, 3 },
+				.bvalid_det_clr = { 0x3028, 3, 2, 0, 3 },
+				.id_det_en	= { 0x3020, 5, 4, 0, 3 },
+				.id_det_st	= { 0x3024, 5, 4, 0, 3 },
+				.id_det_clr	= { 0x3028, 5, 4, 0, 3 },
+				.ls_det_en	= { 0x3020, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x3024, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x3028, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_id	= { 0x0120, 6, 6, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 8, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x3020, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x3024, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x3028, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x0120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x0120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 15, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0110, 3, 2, 0, 3 },
+				.bvalid_det_st	= { 0x0114, 3, 2, 0, 3 },
+				.bvalid_det_clr = { 0x0118, 3, 2, 0, 3 },
+				.id_det_en	= { 0x0110, 5, 4, 0, 3 },
+				.id_det_st	= { 0x0114, 5, 4, 0, 3 },
+				.id_det_clr	= { 0x0118, 5, 4, 0, 3 },
+				.ls_det_en	= { 0x0110, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0114, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0118, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_id	= { 0x0120, 6, 6, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x104, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x110, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x114, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x118, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
+	{
+		.reg = 0x700,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0724, 15, 15, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0728, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0680, 4, 4, 0, 1 },
+				.ls_det_st	= { 0x0690, 4, 4, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 4, 4, 0, 1 },
+				.utmi_ls	= { 0x049c, 14, 13, 0, 1 },
+				.utmi_hstdet	= { 0x049c, 12, 12, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
+	{
+		.reg		= 0xe450,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0xe450, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0xe454, 1, 0, 2, 1 },
+				.bvalid_det_en	= { 0xe3c0, 3, 3, 0, 1 },
+				.bvalid_det_st	= { 0xe3e0, 3, 3, 0, 1 },
+				.bvalid_det_clr	= { 0xe3d0, 3, 3, 0, 1 },
+				.id_det_en	= { 0xe3c0, 5, 4, 0, 3 },
+				.id_det_st	= { 0xe3e0, 5, 4, 0, 3 },
+				.id_det_clr	= { 0xe3d0, 5, 4, 0, 3 },
+				.utmi_avalid	= { 0xe2ac, 7, 7, 0, 1 },
+				.utmi_bvalid	= { 0xe2ac, 12, 12, 0, 1 },
+				.utmi_id	= { 0xe2ac, 8, 8, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0xe458, 1, 0, 0x2, 0x1 },
+				.ls_det_en	= { 0xe3c0, 6, 6, 0, 1 },
+				.ls_det_st	= { 0xe3e0, 6, 6, 0, 1 },
+				.ls_det_clr	= { 0xe3d0, 6, 6, 0, 1 },
+				.utmi_ls	= { 0xe2ac, 22, 21, 0, 1 },
+				.utmi_hstdet	= { 0xe2ac, 23, 23, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0xe454, 3, 0, 5, 1 },
+			.cp_det		= { 0xe2ac, 2, 2, 0, 1 },
+			.dcp_det	= { 0xe2ac, 1, 1, 0, 1 },
+			.dp_det		= { 0xe2ac, 0, 0, 0, 1 },
+			.idm_sink_en	= { 0xe450, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0xe450, 7, 7, 0, 1 },
+			.idp_src_en	= { 0xe450, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0xe450, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0xe450, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0xe450, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg		= 0xe460,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0xe460, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus        = { 0xe464, 1, 0, 2, 1 },
+				.bvalid_det_en  = { 0xe3c0, 8, 8, 0, 1 },
+				.bvalid_det_st  = { 0xe3e0, 8, 8, 0, 1 },
+				.bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
+				.id_det_en	= { 0xe3c0, 10, 9, 0, 3 },
+				.id_det_st	= { 0xe3e0, 10, 9, 0, 3 },
+				.id_det_clr	= { 0xe3d0, 10, 9, 0, 3 },
+				.utmi_avalid	= { 0xe2ac, 10, 10, 0, 1 },
+				.utmi_bvalid    = { 0xe2ac, 16, 16, 0, 1 },
+				.utmi_id	= { 0xe2ac, 11, 11, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0xe468, 1, 0, 0x2, 0x1 },
+				.ls_det_en	= { 0xe3c0, 11, 11, 0, 1 },
+				.ls_det_st	= { 0xe3e0, 11, 11, 0, 1 },
+				.ls_det_clr	= { 0xe3d0, 11, 11, 0, 1 },
+				.utmi_ls	= { 0xe2ac, 26, 25, 0, 1 },
+				.utmi_hstdet	= { 0xe2ac, 27, 27, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+	{
+		.reg = 0xfe8a0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0080, 3, 2, 0, 3 },
+				.bvalid_det_st	= { 0x0084, 3, 2, 0, 3 },
+				.bvalid_det_clr = { 0x0088, 3, 2, 0, 3 },
+				.id_det_en	= { 0x0080, 5, 4, 0, 3 },
+				.id_det_st	= { 0x0084, 5, 4, 0, 3 },
+				.id_det_clr	= { 0x0088, 5, 4, 0, 3 },
+				.utmi_avalid	= { 0x00c0, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 9, 9, 0, 1 },
+				.utmi_id	= { 0x00c0, 6, 6, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				/* Select suspend control from controller */
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0000, 3, 0, 5, 1 },
+			.cp_det		= { 0x00c0, 24, 24, 0, 1 },
+			.dcp_det	= { 0x00c0, 23, 23, 0, 1 },
+			.dp_det		= { 0x00c0, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0008, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0008, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0008, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0008, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0008, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg = 0xfe8b0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 5, 4, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 7, 7, 0, 1 }
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
+	{
+		.reg = 0x0000,
+		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 1 },
+				.bvalid_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 1, 1, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 7, 7, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 6, 6, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+		.chg_det = {
+			.cp_det		= { 0x00c0, 0, 0, 0, 1 },
+			.dcp_det	= { 0x00c0, 0, 0, 0, 1 },
+			.dp_det		= { 0x00c0, 1, 1, 1, 0 },
+			.idm_sink_en	= { 0x0008, 5, 5, 1, 0 },
+			.idp_sink_en	= { 0x0008, 5, 5, 0, 1 },
+			.idp_src_en	= { 0x0008, 14, 14, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 14, 14, 0, 1 },
+			.vdm_src_en	= { 0x0008, 7, 6, 0, 3 },
+			.vdp_src_en	= { 0x0008, 7, 6, 0, 3 },
+		},
+	},
+	{
+		.reg = 0x4000,
+		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 1 },
+				.bvalid_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 1, 1, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 7, 7, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 6, 6, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+		.chg_det = {
+			.cp_det		= { 0x00c0, 0, 0, 0, 1 },
+			.dcp_det	= { 0x00c0, 0, 0, 0, 1 },
+			.dp_det		= { 0x00c0, 1, 1, 1, 0 },
+			.idm_sink_en	= { 0x0008, 5, 5, 1, 0 },
+			.idp_sink_en	= { 0x0008, 5, 5, 0, 1 },
+			.idp_src_en	= { 0x0008, 14, 14, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 14, 14, 0, 1 },
+			.vdm_src_en	= { 0x0008, 7, 6, 0, 3 },
+			.vdp_src_en	= { 0x0008, 7, 6, 0, 3 },
+		},
+	},
+	{
+		.reg = 0x8000,
+		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg = 0xc000,
+		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 15, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0680, 3, 3, 0, 1 },
+				.bvalid_det_st	= { 0x0690, 3, 3, 0, 1 },
+				.bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+				.ls_det_en	= { 0x0680, 2, 2, 0, 1 },
+				.ls_det_st	= { 0x0690, 2, 2, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 2, 2, 0, 1 },
+				.utmi_bvalid	= { 0x0804, 10, 10, 0, 1 },
+				.utmi_ls	= { 0x0804, 13, 12, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0680, 4, 4, 0, 1 },
+				.ls_det_st	= { 0x0690, 4, 4, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 4, 4, 0, 1 },
+				.utmi_ls	= { 0x0804, 9, 8, 0, 1 },
+				.utmi_hstdet	= { 0x0804, 7, 7, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0804, 1, 1, 0, 1 },
+			.dcp_det	= { 0x0804, 0, 0, 0, 1 },
+			.dp_det		= { 0x0804, 2, 2, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+	{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
+	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+	{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
+	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
+	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
+	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
+	{ .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs },
+	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
+
+static struct platform_driver rockchip_usb2phy_driver = {
+	.probe		= rockchip_usb2phy_probe,
+	.driver		= {
+		.name	= "rockchip-usb2phy",
+		.of_match_table = rockchip_usb2phy_dt_match,
+	},
+};
+module_platform_driver(rockchip_usb2phy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
new file mode 100644
index 0000000000..5de5e2e97f
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PIPE USB3.0 PCIE SATA Combo Phy driver
+ *
+ * Copyright (C) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/units.h>
+
+#define BIT_WRITEABLE_SHIFT		16
+#define REF_CLOCK_24MHz			(24 * HZ_PER_MHZ)
+#define REF_CLOCK_25MHz			(25 * HZ_PER_MHZ)
+#define REF_CLOCK_100MHz		(100 * HZ_PER_MHZ)
+
+/* COMBO PHY REG */
+#define PHYREG6				0x14
+#define PHYREG6_PLL_DIV_MASK		GENMASK(7, 6)
+#define PHYREG6_PLL_DIV_SHIFT		6
+#define PHYREG6_PLL_DIV_2		1
+
+#define PHYREG7				0x18
+#define PHYREG7_TX_RTERM_MASK		GENMASK(7, 4)
+#define PHYREG7_TX_RTERM_SHIFT		4
+#define PHYREG7_TX_RTERM_50OHM		8
+#define PHYREG7_RX_RTERM_MASK		GENMASK(3, 0)
+#define PHYREG7_RX_RTERM_SHIFT		0
+#define PHYREG7_RX_RTERM_44OHM		15
+
+#define PHYREG8				0x1C
+#define PHYREG8_SSC_EN			BIT(4)
+
+#define PHYREG11			0x28
+#define PHYREG11_SU_TRIM_0_7		0xF0
+
+#define PHYREG12			0x2C
+#define PHYREG12_PLL_LPF_ADJ_VALUE	4
+
+#define PHYREG13			0x30
+#define PHYREG13_RESISTER_MASK		GENMASK(5, 4)
+#define PHYREG13_RESISTER_SHIFT		0x4
+#define PHYREG13_RESISTER_HIGH_Z	3
+#define PHYREG13_CKRCV_AMP0		BIT(7)
+
+#define PHYREG14			0x34
+#define PHYREG14_CKRCV_AMP1		BIT(0)
+
+#define PHYREG15			0x38
+#define PHYREG15_CTLE_EN		BIT(0)
+#define PHYREG15_SSC_CNT_MASK		GENMASK(7, 6)
+#define PHYREG15_SSC_CNT_SHIFT		6
+#define PHYREG15_SSC_CNT_VALUE		1
+
+#define PHYREG16			0x3C
+#define PHYREG16_SSC_CNT_VALUE		0x5f
+
+#define PHYREG18			0x44
+#define PHYREG18_PLL_LOOP		0x32
+
+#define PHYREG27			0x6C
+#define PHYREG27_RX_TRIM_RK3588		0x4C
+
+#define PHYREG32			0x7C
+#define PHYREG32_SSC_MASK		GENMASK(7, 4)
+#define PHYREG32_SSC_DIR_SHIFT		4
+#define PHYREG32_SSC_UPWARD		0
+#define PHYREG32_SSC_DOWNWARD		1
+#define PHYREG32_SSC_OFFSET_SHIFT	6
+#define PHYREG32_SSC_OFFSET_500PPM	1
+
+#define PHYREG33			0x80
+#define PHYREG33_PLL_KVCO_MASK		GENMASK(4, 2)
+#define PHYREG33_PLL_KVCO_SHIFT		2
+#define PHYREG33_PLL_KVCO_VALUE		2
+
+struct rockchip_combphy_priv;
+
+struct combphy_reg {
+	u16 offset;
+	u16 bitend;
+	u16 bitstart;
+	u16 disable;
+	u16 enable;
+};
+
+struct rockchip_combphy_grfcfg {
+	struct combphy_reg pcie_mode_set;
+	struct combphy_reg usb_mode_set;
+	struct combphy_reg sgmii_mode_set;
+	struct combphy_reg qsgmii_mode_set;
+	struct combphy_reg pipe_rxterm_set;
+	struct combphy_reg pipe_txelec_set;
+	struct combphy_reg pipe_txcomp_set;
+	struct combphy_reg pipe_clk_25m;
+	struct combphy_reg pipe_clk_100m;
+	struct combphy_reg pipe_phymode_sel;
+	struct combphy_reg pipe_rate_sel;
+	struct combphy_reg pipe_rxterm_sel;
+	struct combphy_reg pipe_txelec_sel;
+	struct combphy_reg pipe_txcomp_sel;
+	struct combphy_reg pipe_clk_ext;
+	struct combphy_reg pipe_sel_usb;
+	struct combphy_reg pipe_sel_qsgmii;
+	struct combphy_reg pipe_phy_status;
+	struct combphy_reg con0_for_pcie;
+	struct combphy_reg con1_for_pcie;
+	struct combphy_reg con2_for_pcie;
+	struct combphy_reg con3_for_pcie;
+	struct combphy_reg con0_for_sata;
+	struct combphy_reg con1_for_sata;
+	struct combphy_reg con2_for_sata;
+	struct combphy_reg con3_for_sata;
+	struct combphy_reg pipe_con0_for_sata;
+	struct combphy_reg pipe_con1_for_sata;
+	struct combphy_reg pipe_xpcs_phy_ready;
+	struct combphy_reg pipe_pcie1l0_sel;
+	struct combphy_reg pipe_pcie1l1_sel;
+};
+
+struct rockchip_combphy_cfg {
+	const struct rockchip_combphy_grfcfg *grfcfg;
+	int (*combphy_cfg)(struct rockchip_combphy_priv *priv);
+};
+
+struct rockchip_combphy_priv {
+	u8 type;
+	void __iomem *mmio;
+	int num_clks;
+	struct clk_bulk_data *clks;
+	struct device *dev;
+	struct regmap *pipe_grf;
+	struct regmap *phy_grf;
+	struct phy *phy;
+	struct reset_control *phy_rst;
+	const struct rockchip_combphy_cfg *cfg;
+	bool enable_ssc;
+	bool ext_refclk;
+	struct clk *refclk;
+};
+
+static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
+				     int mask, int val, int reg)
+{
+	unsigned int temp;
+
+	temp = readl(priv->mmio + reg);
+	temp = (temp & ~(mask)) | val;
+	writel(temp, priv->mmio + reg);
+}
+
+static int rockchip_combphy_param_write(struct regmap *base,
+					const struct combphy_reg *reg, bool en)
+{
+	u32 val, mask, tmp;
+
+	tmp = en ? reg->enable : reg->disable;
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+	return regmap_write(base, reg->offset, val);
+}
+
+static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	u32 mask, val;
+
+	mask = GENMASK(cfg->pipe_phy_status.bitend,
+		       cfg->pipe_phy_status.bitstart);
+
+	regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val);
+	val = (val & mask) >> cfg->pipe_phy_status.bitstart;
+
+	return val;
+}
+
+static int rockchip_combphy_init(struct phy *phy)
+{
+	struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	u32 val;
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(priv->dev, "failed to enable clks\n");
+		return ret;
+	}
+
+	switch (priv->type) {
+	case PHY_TYPE_PCIE:
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_SATA:
+	case PHY_TYPE_SGMII:
+	case PHY_TYPE_QSGMII:
+		if (priv->cfg->combphy_cfg)
+			ret = priv->cfg->combphy_cfg(priv);
+		break;
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret) {
+		dev_err(priv->dev, "failed to init phy for phy type %x\n", priv->type);
+		goto err_clk;
+	}
+
+	ret = reset_control_deassert(priv->phy_rst);
+	if (ret)
+		goto err_clk;
+
+	if (priv->type == PHY_TYPE_USB3) {
+		ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready,
+						priv, val,
+						val == cfg->pipe_phy_status.enable,
+						10, 1000);
+		if (ret)
+			dev_warn(priv->dev, "wait phy status ready timeout\n");
+	}
+
+	return 0;
+
+err_clk:
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
+	return ret;
+}
+
+static int rockchip_combphy_exit(struct phy *phy)
+{
+	struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->phy_rst);
+
+	return 0;
+}
+
+static const struct phy_ops rochchip_combphy_ops = {
+	.init = rockchip_combphy_init,
+	.exit = rockchip_combphy_exit,
+	.owner = THIS_MODULE,
+};
+
+static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args)
+{
+	struct rockchip_combphy_priv *priv = dev_get_drvdata(dev);
+
+	if (args->args_count != 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (priv->type != PHY_NONE && priv->type != args->args[0])
+		dev_warn(dev, "phy type select %d overwriting type %d\n",
+			 args->args[0], priv->type);
+
+	priv->type = args->args[0];
+
+	return priv->phy;
+}
+
+static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv)
+{
+	int i;
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -EINVAL;
+
+	priv->refclk = NULL;
+	for (i = 0; i < priv->num_clks; i++) {
+		if (!strncmp(priv->clks[i].id, "ref", 3)) {
+			priv->refclk = priv->clks[i].clk;
+			break;
+		}
+	}
+
+	if (!priv->refclk) {
+		dev_err(dev, "no refclk found\n");
+		return -EINVAL;
+	}
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf)) {
+		dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n");
+		return PTR_ERR(priv->pipe_grf);
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc");
+
+	priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
+
+	priv->phy_rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(priv->phy_rst))
+		return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n");
+
+	return 0;
+}
+
+static int rockchip_combphy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_combphy_priv *priv;
+	const struct rockchip_combphy_cfg *phy_cfg;
+	struct resource *res;
+	int ret;
+
+	phy_cfg = of_device_get_match_data(dev);
+	if (!phy_cfg) {
+		dev_err(dev, "no OF match data provided\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->dev = dev;
+	priv->type = PHY_NONE;
+	priv->cfg = phy_cfg;
+
+	ret = rockchip_combphy_parse_dt(dev, priv);
+	if (ret)
+		return ret;
+
+	ret = reset_control_assert(priv->phy_rst);
+	if (ret) {
+		dev_err(dev, "failed to reset phy\n");
+		return ret;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	unsigned long rate;
+	u32 val;
+
+	switch (priv->type) {
+	case PHY_TYPE_PCIE:
+		/* Set SSC downward spread spectrum. */
+		rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+					 PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+					 PHYREG32);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+		break;
+
+	case PHY_TYPE_USB3:
+		/* Set SSC downward spread spectrum. */
+		rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+					 PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+					 PHYREG32);
+
+		/* Enable adaptive CTLE for USB3.0 Rx. */
+		val = readl(priv->mmio + PHYREG15);
+		val |= PHYREG15_CTLE_EN;
+		writel(val, priv->mmio + PHYREG15);
+
+		/* Set PLL KVCO fine tuning signals. */
+		rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+					 PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT,
+					 PHYREG33);
+
+		/* Enable controlling random jitter. */
+		writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+		/* Set PLL input clock divider 1/2. */
+		rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+					 PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT,
+					 PHYREG6);
+
+		writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+		writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+		break;
+
+	case PHY_TYPE_SATA:
+		/* Enable adaptive CTLE for SATA Rx. */
+		val = readl(priv->mmio + PHYREG15);
+		val |= PHYREG15_CTLE_EN;
+		writel(val, priv->mmio + PHYREG15);
+		/*
+		 * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA.
+		 * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm)
+		 */
+		val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
+		val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
+		writel(val, priv->mmio + PHYREG7);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+		break;
+
+	case PHY_TYPE_SGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true);
+		break;
+
+	case PHY_TYPE_QSGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true);
+		break;
+
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
+
+	rate = clk_get_rate(priv->refclk);
+
+	switch (rate) {
+	case REF_CLOCK_24MHz:
+		if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
+			/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */
+			val = PHYREG15_SSC_CNT_VALUE << PHYREG15_SSC_CNT_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
+						 val, PHYREG15);
+
+			writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
+		}
+		break;
+
+	case REF_CLOCK_25MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
+		break;
+
+	case REF_CLOCK_100MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+		if (priv->type == PHY_TYPE_PCIE) {
+			/* PLL KVCO  fine tuning. */
+			val = PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+						 val, PHYREG33);
+
+			/* Enable controlling random jitter. */
+			writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+			val = PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+						 val, PHYREG6);
+
+			writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+			writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+		} else if (priv->type == PHY_TYPE_SATA) {
+			/* downward spread spectrum +500ppm */
+			val = PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT;
+			val |= PHYREG32_SSC_OFFSET_500PPM << PHYREG32_SSC_OFFSET_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
+		}
+		break;
+
+	default:
+		dev_err(priv->dev, "unsupported rate: %lu\n", rate);
+		return -EINVAL;
+	}
+
+	if (priv->ext_refclk) {
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
+		if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
+			val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT;
+			val |= PHYREG13_CKRCV_AMP0;
+			rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, PHYREG13);
+
+			val = readl(priv->mmio + PHYREG14);
+			val |= PHYREG14_CKRCV_AMP1;
+			writel(val, priv->mmio + PHYREG14);
+		}
+	}
+
+	if (priv->enable_ssc) {
+		val = readl(priv->mmio + PHYREG8);
+		val |= PHYREG8_SSC_EN;
+		writel(val, priv->mmio + PHYREG8);
+	}
+
+	return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
+	/* pipe-phy-grf */
+	.pcie_mode_set		= { 0x0000, 5, 0, 0x00, 0x11 },
+	.usb_mode_set		= { 0x0000, 5, 0, 0x00, 0x04 },
+	.sgmii_mode_set		= { 0x0000, 5, 0, 0x00, 0x01 },
+	.qsgmii_mode_set	= { 0x0000, 5, 0, 0x00, 0x21 },
+	.pipe_rxterm_set	= { 0x0000, 12, 12, 0x00, 0x01 },
+	.pipe_txelec_set	= { 0x0004, 1, 1, 0x00, 0x01 },
+	.pipe_txcomp_set	= { 0x0004, 4, 4, 0x00, 0x01 },
+	.pipe_clk_25m		= { 0x0004, 14, 13, 0x00, 0x01 },
+	.pipe_clk_100m		= { 0x0004, 14, 13, 0x00, 0x02 },
+	.pipe_phymode_sel	= { 0x0008, 1, 1, 0x00, 0x01 },
+	.pipe_rate_sel		= { 0x0008, 2, 2, 0x00, 0x01 },
+	.pipe_rxterm_sel	= { 0x0008, 8, 8, 0x00, 0x01 },
+	.pipe_txelec_sel	= { 0x0008, 12, 12, 0x00, 0x01 },
+	.pipe_txcomp_sel	= { 0x0008, 15, 15, 0x00, 0x01 },
+	.pipe_clk_ext		= { 0x000c, 9, 8, 0x02, 0x01 },
+	.pipe_sel_usb		= { 0x000c, 14, 13, 0x00, 0x01 },
+	.pipe_sel_qsgmii	= { 0x000c, 15, 13, 0x00, 0x07 },
+	.pipe_phy_status	= { 0x0034, 6, 6, 0x01, 0x00 },
+	.con0_for_pcie		= { 0x0000, 15, 0, 0x00, 0x1000 },
+	.con1_for_pcie		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_pcie		= { 0x0008, 15, 0, 0x00, 0x0101 },
+	.con3_for_pcie		= { 0x000c, 15, 0, 0x00, 0x0200 },
+	.con0_for_sata		= { 0x0000, 15, 0, 0x00, 0x0119 },
+	.con1_for_sata		= { 0x0004, 15, 0, 0x00, 0x0040 },
+	.con2_for_sata		= { 0x0008, 15, 0, 0x00, 0x80c3 },
+	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
+	/* pipe-grf */
+	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
+	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
+};
+
+static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
+	.grfcfg		= &rk3568_combphy_grfcfgs,
+	.combphy_cfg	= rk3568_combphy_cfg,
+};
+
+static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	unsigned long rate;
+	u32 val;
+
+	switch (priv->type) {
+	case PHY_TYPE_PCIE:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l0_sel, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l1_sel, true);
+		break;
+	case PHY_TYPE_USB3:
+		/* Set SSC downward spread spectrum */
+		rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+					 PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+					 PHYREG32);
+
+		/* Enable adaptive CTLE for USB3.0 Rx. */
+		val = readl(priv->mmio + PHYREG15);
+		val |= PHYREG15_CTLE_EN;
+		writel(val, priv->mmio + PHYREG15);
+
+		/* Set PLL KVCO fine tuning signals. */
+		rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+					 PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT,
+					 PHYREG33);
+
+		/* Enable controlling random jitter. */
+		writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+		/* Set PLL input clock divider 1/2. */
+		rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+					 PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT,
+					 PHYREG6);
+
+		writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+		writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+		break;
+	case PHY_TYPE_SATA:
+		/* Enable adaptive CTLE for SATA Rx. */
+		val = readl(priv->mmio + PHYREG15);
+		val |= PHYREG15_CTLE_EN;
+		writel(val, priv->mmio + PHYREG15);
+		/*
+		 * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA.
+		 * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm)
+		 */
+		val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
+		val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
+		writel(val, priv->mmio + PHYREG7);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true);
+		break;
+	case PHY_TYPE_SGMII:
+	case PHY_TYPE_QSGMII:
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
+
+	rate = clk_get_rate(priv->refclk);
+
+	switch (rate) {
+	case REF_CLOCK_24MHz:
+		if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
+			/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */
+			val = PHYREG15_SSC_CNT_VALUE << PHYREG15_SSC_CNT_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
+						 val, PHYREG15);
+
+			writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
+		}
+		break;
+
+	case REF_CLOCK_25MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
+		break;
+	case REF_CLOCK_100MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+		if (priv->type == PHY_TYPE_PCIE) {
+			/* PLL KVCO fine tuning. */
+			val = 4 << PHYREG33_PLL_KVCO_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+						 val, PHYREG33);
+
+			/* Enable controlling random jitter. */
+			writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+			/* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */
+			writel(PHYREG27_RX_TRIM_RK3588, priv->mmio + PHYREG27);
+
+			/* Set up su_trim:  */
+			writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+		} else if (priv->type == PHY_TYPE_SATA) {
+			/* downward spread spectrum +500ppm */
+			val = PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT;
+			val |= PHYREG32_SSC_OFFSET_500PPM << PHYREG32_SSC_OFFSET_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
+		}
+		break;
+	default:
+		dev_err(priv->dev, "Unsupported rate: %lu\n", rate);
+		return -EINVAL;
+	}
+
+	if (priv->ext_refclk) {
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
+		if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
+			val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT;
+			val |= PHYREG13_CKRCV_AMP0;
+			rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, PHYREG13);
+
+			val = readl(priv->mmio + PHYREG14);
+			val |= PHYREG14_CKRCV_AMP1;
+			writel(val, priv->mmio + PHYREG14);
+		}
+	}
+
+	if (priv->enable_ssc) {
+		val = readl(priv->mmio + PHYREG8);
+		val |= PHYREG8_SSC_EN;
+		writel(val, priv->mmio + PHYREG8);
+	}
+
+	return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3588_combphy_grfcfgs = {
+	/* pipe-phy-grf */
+	.pcie_mode_set		= { 0x0000, 5, 0, 0x00, 0x11 },
+	.usb_mode_set		= { 0x0000, 5, 0, 0x00, 0x04 },
+	.pipe_rxterm_set	= { 0x0000, 12, 12, 0x00, 0x01 },
+	.pipe_txelec_set	= { 0x0004, 1, 1, 0x00, 0x01 },
+	.pipe_txcomp_set	= { 0x0004, 4, 4, 0x00, 0x01 },
+	.pipe_clk_25m		= { 0x0004, 14, 13, 0x00, 0x01 },
+	.pipe_clk_100m		= { 0x0004, 14, 13, 0x00, 0x02 },
+	.pipe_rxterm_sel	= { 0x0008, 8, 8, 0x00, 0x01 },
+	.pipe_txelec_sel	= { 0x0008, 12, 12, 0x00, 0x01 },
+	.pipe_txcomp_sel	= { 0x0008, 15, 15, 0x00, 0x01 },
+	.pipe_clk_ext		= { 0x000c, 9, 8, 0x02, 0x01 },
+	.pipe_phy_status	= { 0x0034, 6, 6, 0x01, 0x00 },
+	.con0_for_pcie		= { 0x0000, 15, 0, 0x00, 0x1000 },
+	.con1_for_pcie		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_pcie		= { 0x0008, 15, 0, 0x00, 0x0101 },
+	.con3_for_pcie		= { 0x000c, 15, 0, 0x00, 0x0200 },
+	.con0_for_sata		= { 0x0000, 15, 0, 0x00, 0x0129 },
+	.con1_for_sata		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_sata		= { 0x0008, 15, 0, 0x00, 0x80c1 },
+	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x0407 },
+	/* pipe-grf */
+	.pipe_con0_for_sata	= { 0x0000, 11, 5, 0x00, 0x22 },
+	.pipe_con1_for_sata	= { 0x0000, 2, 0, 0x00, 0x2 },
+	.pipe_pcie1l0_sel	= { 0x0100, 0, 0, 0x01, 0x0 },
+	.pipe_pcie1l1_sel	= { 0x0100, 1, 1, 0x01, 0x0 },
+};
+
+static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = {
+	.grfcfg		= &rk3588_combphy_grfcfgs,
+	.combphy_cfg	= rk3588_combphy_cfg,
+};
+
+static const struct of_device_id rockchip_combphy_of_match[] = {
+	{
+		.compatible = "rockchip,rk3568-naneng-combphy",
+		.data = &rk3568_combphy_cfgs,
+	},
+	{
+		.compatible = "rockchip,rk3588-naneng-combphy",
+		.data = &rk3588_combphy_cfgs,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match);
+
+static struct platform_driver rockchip_combphy_driver = {
+	.probe	= rockchip_combphy_probe,
+	.driver = {
+		.name = "rockchip-naneng-combphy",
+		.of_match_table = rockchip_combphy_of_match,
+	},
+};
+module_platform_driver(rockchip_combphy_driver);
+
+MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
new file mode 100644
index 0000000000..8234b83fdd
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip PCIe PHY driver
+ *
+ * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
+ * Copyright (C) 2016 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+		((val) << (shift) | (mask) << ((shift) + 16))
+
+#define PHY_MAX_LANE_NUM      4
+#define PHY_CFG_DATA_SHIFT    7
+#define PHY_CFG_ADDR_SHIFT    1
+#define PHY_CFG_DATA_MASK     0xf
+#define PHY_CFG_ADDR_MASK     0x3f
+#define PHY_CFG_RD_MASK       0x3ff
+#define PHY_CFG_WR_ENABLE     1
+#define PHY_CFG_WR_DISABLE    1
+#define PHY_CFG_WR_SHIFT      0
+#define PHY_CFG_WR_MASK       1
+#define PHY_CFG_PLL_LOCK      0x10
+#define PHY_CFG_CLK_TEST      0x10
+#define PHY_CFG_CLK_SCC       0x12
+#define PHY_CFG_SEPE_RATE     BIT(3)
+#define PHY_CFG_PLL_100M      BIT(3)
+#define PHY_PLL_LOCKED        BIT(9)
+#define PHY_PLL_OUTPUT        BIT(10)
+#define PHY_LANE_A_STATUS     0x30
+#define PHY_LANE_B_STATUS     0x31
+#define PHY_LANE_C_STATUS     0x32
+#define PHY_LANE_D_STATUS     0x33
+#define PHY_LANE_RX_DET_SHIFT 11
+#define PHY_LANE_RX_DET_TH    0x1
+#define PHY_LANE_IDLE_OFF     0x1
+#define PHY_LANE_IDLE_MASK    0x1
+#define PHY_LANE_IDLE_A_SHIFT 3
+#define PHY_LANE_IDLE_B_SHIFT 4
+#define PHY_LANE_IDLE_C_SHIFT 5
+#define PHY_LANE_IDLE_D_SHIFT 6
+
+struct rockchip_pcie_data {
+	unsigned int pcie_conf;
+	unsigned int pcie_status;
+	unsigned int pcie_laneoff;
+};
+
+struct rockchip_pcie_phy {
+	struct rockchip_pcie_data *phy_data;
+	struct regmap *reg_base;
+	struct phy_pcie_instance {
+		struct phy *phy;
+		u32 index;
+	} phys[PHY_MAX_LANE_NUM];
+	struct mutex pcie_mutex;
+	struct reset_control *phy_rst;
+	struct clk *clk_pciephy_ref;
+	int pwr_cnt;
+	int init_cnt;
+};
+
+static struct rockchip_pcie_phy *to_pcie_phy(struct phy_pcie_instance *inst)
+{
+	return container_of(inst, struct rockchip_pcie_phy,
+					phys[inst->index]);
+}
+
+static struct phy *rockchip_pcie_phy_of_xlate(struct device *dev,
+					      struct of_phandle_args *args)
+{
+	struct rockchip_pcie_phy *rk_phy = dev_get_drvdata(dev);
+
+	if (args->args_count == 0)
+		return rk_phy->phys[0].phy;
+
+	if (WARN_ON(args->args[0] >= PHY_MAX_LANE_NUM))
+		return ERR_PTR(-ENODEV);
+
+	return rk_phy->phys[args->args[0]].phy;
+}
+
+
+static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy,
+			      u32 addr, u32 data)
+{
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(data,
+				   PHY_CFG_DATA_MASK,
+				   PHY_CFG_DATA_SHIFT) |
+		     HIWORD_UPDATE(addr,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	udelay(1);
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_WR_ENABLE,
+				   PHY_CFG_WR_MASK,
+				   PHY_CFG_WR_SHIFT));
+	udelay(1);
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_WR_DISABLE,
+				   PHY_CFG_WR_MASK,
+				   PHY_CFG_WR_SHIFT));
+}
+
+static int rockchip_pcie_phy_power_off(struct phy *phy)
+{
+	struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+	struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+	int err = 0;
+
+	mutex_lock(&rk_phy->pcie_mutex);
+
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->phy_data->pcie_laneoff,
+		     HIWORD_UPDATE(PHY_LANE_IDLE_OFF,
+				   PHY_LANE_IDLE_MASK,
+				   PHY_LANE_IDLE_A_SHIFT + inst->index));
+
+	if (--rk_phy->pwr_cnt)
+		goto err_out;
+
+	err = reset_control_assert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+		goto err_restore;
+	}
+
+err_out:
+	mutex_unlock(&rk_phy->pcie_mutex);
+	return 0;
+
+err_restore:
+	rk_phy->pwr_cnt++;
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->phy_data->pcie_laneoff,
+		     HIWORD_UPDATE(!PHY_LANE_IDLE_OFF,
+				   PHY_LANE_IDLE_MASK,
+				   PHY_LANE_IDLE_A_SHIFT + inst->index));
+	mutex_unlock(&rk_phy->pcie_mutex);
+	return err;
+}
+
+static int rockchip_pcie_phy_power_on(struct phy *phy)
+{
+	struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+	struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+	int err = 0;
+	u32 status;
+	unsigned long timeout;
+
+	mutex_lock(&rk_phy->pcie_mutex);
+
+	if (rk_phy->pwr_cnt++)
+		goto err_out;
+
+	err = reset_control_deassert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+		goto err_pwr_cnt;
+	}
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->phy_data->pcie_laneoff,
+		     HIWORD_UPDATE(!PHY_LANE_IDLE_OFF,
+				   PHY_LANE_IDLE_MASK,
+				   PHY_LANE_IDLE_A_SHIFT + inst->index));
+
+	/*
+	 * No documented timeout value for phy operation below,
+	 * so we make it large enough here. And we use loop-break
+	 * method which should not be harmful.
+	 */
+	timeout = jiffies + msecs_to_jiffies(1000);
+
+	err = -EINVAL;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (status & PHY_PLL_LOCKED) {
+			dev_dbg(&phy->dev, "pll locked!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll lock timeout!\n");
+		goto err_pll_lock;
+	}
+
+	phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
+	phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
+
+	err = -ETIMEDOUT;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (!(status & PHY_PLL_OUTPUT)) {
+			dev_dbg(&phy->dev, "pll output enable done!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll output enable timeout!\n");
+		goto err_pll_lock;
+	}
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	err = -EINVAL;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (status & PHY_PLL_LOCKED) {
+			dev_dbg(&phy->dev, "pll relocked!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll relock timeout!\n");
+		goto err_pll_lock;
+	}
+
+err_out:
+	mutex_unlock(&rk_phy->pcie_mutex);
+	return 0;
+
+err_pll_lock:
+	reset_control_assert(rk_phy->phy_rst);
+err_pwr_cnt:
+	rk_phy->pwr_cnt--;
+	mutex_unlock(&rk_phy->pcie_mutex);
+	return err;
+}
+
+static int rockchip_pcie_phy_init(struct phy *phy)
+{
+	struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+	struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+	int err = 0;
+
+	mutex_lock(&rk_phy->pcie_mutex);
+
+	if (rk_phy->init_cnt++)
+		goto err_out;
+
+	err = clk_prepare_enable(rk_phy->clk_pciephy_ref);
+	if (err) {
+		dev_err(&phy->dev, "Fail to enable pcie ref clock.\n");
+		goto err_refclk;
+	}
+
+	err = reset_control_assert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+		goto err_reset;
+	}
+
+err_out:
+	mutex_unlock(&rk_phy->pcie_mutex);
+	return 0;
+
+err_reset:
+
+	clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+err_refclk:
+	rk_phy->init_cnt--;
+	mutex_unlock(&rk_phy->pcie_mutex);
+	return err;
+}
+
+static int rockchip_pcie_phy_exit(struct phy *phy)
+{
+	struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+	struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+
+	mutex_lock(&rk_phy->pcie_mutex);
+
+	if (--rk_phy->init_cnt)
+		goto err_init_cnt;
+
+	clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+
+err_init_cnt:
+	mutex_unlock(&rk_phy->pcie_mutex);
+	return 0;
+}
+
+static const struct phy_ops ops = {
+	.init		= rockchip_pcie_phy_init,
+	.exit		= rockchip_pcie_phy_exit,
+	.power_on	= rockchip_pcie_phy_power_on,
+	.power_off	= rockchip_pcie_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct rockchip_pcie_data rk3399_pcie_data = {
+	.pcie_conf = 0xe220,
+	.pcie_status = 0xe2a4,
+	.pcie_laneoff = 0xe214,
+};
+
+static const struct of_device_id rockchip_pcie_phy_dt_ids[] = {
+	{
+		.compatible = "rockchip,rk3399-pcie-phy",
+		.data = &rk3399_pcie_data,
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids);
+
+static int rockchip_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_pcie_phy *rk_phy;
+	struct phy_provider *phy_provider;
+	struct regmap *grf;
+	const struct of_device_id *of_id;
+	int i;
+	u32 phy_num;
+
+	grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(grf)) {
+		dev_err(dev, "Cannot find GRF syscon\n");
+		return PTR_ERR(grf);
+	}
+
+	rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+	if (!rk_phy)
+		return -ENOMEM;
+
+	of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data;
+	rk_phy->reg_base = grf;
+
+	mutex_init(&rk_phy->pcie_mutex);
+
+	rk_phy->phy_rst = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(rk_phy->phy_rst)) {
+		if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER)
+			dev_err(dev,
+				"missing phy property for reset controller\n");
+		return PTR_ERR(rk_phy->phy_rst);
+	}
+
+	rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk");
+	if (IS_ERR(rk_phy->clk_pciephy_ref)) {
+		dev_err(dev, "refclk not found.\n");
+		return PTR_ERR(rk_phy->clk_pciephy_ref);
+	}
+
+	/* parse #phy-cells to see if it's legacy PHY model */
+	if (of_property_read_u32(dev->of_node, "#phy-cells", &phy_num))
+		return -ENOENT;
+
+	phy_num = (phy_num == 0) ? 1 : PHY_MAX_LANE_NUM;
+	dev_dbg(dev, "phy number is %d\n", phy_num);
+
+	for (i = 0; i < phy_num; i++) {
+		rk_phy->phys[i].phy = devm_phy_create(dev, dev->of_node, &ops);
+		if (IS_ERR(rk_phy->phys[i].phy)) {
+			dev_err(dev, "failed to create PHY%d\n", i);
+			return PTR_ERR(rk_phy->phys[i].phy);
+		}
+		rk_phy->phys[i].index = i;
+		phy_set_drvdata(rk_phy->phys[i].phy, &rk_phy->phys[i]);
+	}
+
+	platform_set_drvdata(pdev, rk_phy);
+	phy_provider = devm_of_phy_provider_register(dev,
+					rockchip_pcie_phy_of_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver rockchip_pcie_driver = {
+	.probe		= rockchip_pcie_phy_probe,
+	.driver		= {
+		.name	= "rockchip-pcie-phy",
+		.of_match_table = rockchip_pcie_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_pcie_driver);
+
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 0000000000..121e5961ce
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/pcie.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1			0x4
+#define GRF_PCIE30PHY_CON6			0x18
+#define GRF_PCIE30PHY_CON9			0x24
+#define GRF_PCIE30PHY_DA_OCM			(BIT(15) | BIT(31))
+#define GRF_PCIE30PHY_STATUS0			0x80
+#define GRF_PCIE30PHY_WR_EN			(0xf << 16)
+#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON			0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
+#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
+
+#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
+#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
+#define RK3588_LANE_AGGREGATION		BIT(2)
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+	const struct rockchip_p3phy_ops *ops;
+	void __iomem *mmio;
+	/* mode: RC, EP */
+	int mode;
+	/* pcie30_phymode: Aggregation, Bifurcation */
+	int pcie30_phymode;
+	struct regmap *phy_grf;
+	struct regmap *pipe_grf;
+	struct reset_control *p30phy;
+	struct phy *phy;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	int num_lanes;
+	u32 lanes[4];
+};
+
+struct rockchip_p3phy_ops {
+	int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	/* Actually We don't care EP/RC mode, but just record it */
+	switch (submode) {
+	case PHY_MODE_PCIE_RC:
+		priv->mode = PHY_MODE_PCIE_RC;
+		break;
+	case PHY_MODE_PCIE_EP:
+		priv->mode = PHY_MODE_PCIE_EP;
+		break;
+	default:
+		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+	struct phy *phy = priv->phy;
+	bool bifurcation = false;
+	int ret;
+	u32 reg;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, GRF_PCIE30PHY_DA_OCM);
+
+	for (int i = 0; i < priv->num_lanes; i++) {
+		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
+		if (priv->lanes[i] > 1)
+			bifurcation = true;
+	}
+
+	/* Set bifurcation if needed, and it doesn't care RC/EP */
+	if (bifurcation) {
+		dev_info(&phy->dev, "bifurcation enabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     GRF_PCIE30PHY_WR_EN | RK3568_BIFURCATION_LANE_0_1);
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+			     GRF_PCIE30PHY_DA_OCM);
+	} else {
+		dev_dbg(&phy->dev, "bifurcation disabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     GRF_PCIE30PHY_WR_EN & ~RK3568_BIFURCATION_LANE_0_1);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       GRF_PCIE30PHY_STATUS0,
+				       reg, SRAM_INIT_DONE(reg),
+				       0, 500);
+	if (ret)
+		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+	.phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+	u32 reg = 0;
+	u8 mode = 0;
+	int ret;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
+
+	/* Set bifurcation if needed */
+	for (int i = 0; i < priv->num_lanes; i++) {
+		if (!priv->lanes[i])
+			mode |= (BIT(i) << 3);
+
+		if (priv->lanes[i] > 1)
+			mode |= (BIT(i) >> 1);
+	}
+
+	if (!mode)
+		reg = RK3588_LANE_AGGREGATION;
+	else {
+		if (mode & (BIT(0) | BIT(1)))
+			reg |= RK3588_BIFURCATION_LANE_0_1;
+
+		if (mode & (BIT(2) | BIT(3)))
+			reg |= RK3588_BIFURCATION_LANE_2_3;
+	}
+
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
+
+	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+	if (!IS_ERR(priv->pipe_grf)) {
+		reg = (mode & (BIT(6) | BIT(7))) >> 6;
+		if (reg)
+			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+				     (reg << 16) | reg);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+				       reg, RK3588_SRAM_INIT_DONE(reg),
+				       0, 500);
+	ret |= regmap_read_poll_timeout(priv->phy_grf,
+					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+					reg, RK3588_SRAM_INIT_DONE(reg),
+					0, 500);
+	if (ret)
+		dev_err(&priv->phy->dev, "lock failed 0x%x, check input refclk and power supply\n",
+			reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+	.phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(&priv->phy->dev, "failed to enable PCIe bulk clks %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(priv->p30phy);
+	udelay(1);
+
+	if (priv->ops->phy_init) {
+		ret = priv->ops->phy_init(priv);
+		if (ret)
+			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	}
+
+	return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->p30phy);
+	return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+	.init = rochchip_p3phy_init,
+	.exit = rochchip_p3phy_exit,
+	.set_mode = rockchip_p3phy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static int rockchip_p3phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_p3phy_priv *priv;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->ops = of_device_get_match_data(&pdev->dev);
+	if (!priv->ops) {
+		dev_err(dev, "no of match data provided\n");
+		return -EINVAL;
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	if (of_device_is_compatible(np, "rockchip,rk3588-pcie3-phy")) {
+		priv->pipe_grf =
+			syscon_regmap_lookup_by_phandle(dev->of_node,
+							"rockchip,pipe-grf");
+		if (IS_ERR(priv->pipe_grf))
+			dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+	} else {
+		priv->pipe_grf = NULL;
+	}
+
+	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
+							     priv->lanes, 2,
+							     ARRAY_SIZE(priv->lanes));
+
+	/* if no data-lanes assume aggregation */
+	if (priv->num_lanes == -EINVAL) {
+		dev_dbg(dev, "no data-lanes property found\n");
+		priv->num_lanes = 1;
+		priv->lanes[0] = 1;
+	} else if (priv->num_lanes < 0) {
+		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
+		return priv->num_lanes;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
+	if (IS_ERR(priv->p30phy)) {
+		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
+				     "failed to get phy reset control\n");
+	}
+	if (!priv->p30phy)
+		dev_info(dev, "no phy reset control specified\n");
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -ENODEV;
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct platform_driver rockchip_p3phy_driver = {
+	.probe	= rockchip_p3phy_probe,
+	.driver = {
+		.name = "rockchip-snps-pcie3-phy",
+		.of_match_table = rockchip_p3phy_of_match,
+	},
+};
+module_platform_driver(rockchip_p3phy_driver);
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
new file mode 100644
index 0000000000..4efcb78b0a
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -0,0 +1,1225 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ *         Kever Yang <kever.yang@rock-chips.com>
+ *
+ * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock
+ * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has
+ * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode.
+ * At USB3 only mode, both PLL clocks need to be initialized, this allows the
+ * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB
+ * device.
+ * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes
+ * are all used for DP.
+ *
+ * This driver gets extcon cable state and property, then decides which mode to
+ * select:
+ *
+ * 1. USB3 only mode:
+ *    EXTCON_USB or EXTCON_USB_HOST state is true, and
+ *    EXTCON_PROP_USB_SS property is true.
+ *    EXTCON_DISP_DP state is false.
+ *
+ * 2. DP only mode:
+ *    EXTCON_DISP_DP state is true, and
+ *    EXTCON_PROP_USB_SS property is false.
+ *    If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy
+ *    is a separate phy, so this case is still DP only mode.
+ *
+ * 3. USB3+DP mode:
+ *    EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and
+ *    EXTCON_PROP_USB_SS property is true.
+ *
+ * This Type-C PHY driver supports normal and flip orientation. The orientation
+ * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip
+ * orientation, false is normal orientation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+#define CMN_SSM_BANDGAP			(0x21 << 2)
+#define CMN_SSM_BIAS			(0x22 << 2)
+#define CMN_PLLSM0_PLLEN		(0x29 << 2)
+#define CMN_PLLSM0_PLLPRE		(0x2a << 2)
+#define CMN_PLLSM0_PLLVREF		(0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK		(0x2c << 2)
+#define CMN_PLLSM1_PLLEN		(0x31 << 2)
+#define CMN_PLLSM1_PLLPRE		(0x32 << 2)
+#define CMN_PLLSM1_PLLVREF		(0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK		(0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL	(0x37 << 2)
+#define CMN_ICAL_OVRD			(0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD		(0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT		(0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER		(0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START	(0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START	(0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR	(0x93 << 2)
+#define CMN_PLL0_INTDIV			(0x94 << 2)
+#define CMN_PLL0_FRACDIV		(0x95 << 2)
+#define CMN_PLL0_HIGH_THR		(0x96 << 2)
+#define CMN_PLL0_DSM_DIAG		(0x97 << 2)
+#define CMN_PLL0_SS_CTRL1		(0x98 << 2)
+#define CMN_PLL0_SS_CTRL2		(0x99 << 2)
+#define CMN_PLL1_VCOCAL_START		(0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD		(0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT		(0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER		(0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START	(0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START	(0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR	(0xb3 << 2)
+#define CMN_PLL1_INTDIV			(0xb4 << 2)
+#define CMN_PLL1_FRACDIV		(0xb5 << 2)
+#define CMN_PLL1_HIGH_THR		(0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG		(0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
+#define CMN_RXCAL_OVRD			(0xd1 << 2)
+
+#define CMN_TXPUCAL_CTRL		(0xe0 << 2)
+#define CMN_TXPUCAL_OVRD		(0xe1 << 2)
+#define CMN_TXPDCAL_CTRL		(0xf0 << 2)
+#define CMN_TXPDCAL_OVRD		(0xf1 << 2)
+
+/* For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL */
+#define CMN_TXPXCAL_START		BIT(15)
+#define CMN_TXPXCAL_DONE		BIT(14)
+#define CMN_TXPXCAL_NO_RESPONSE		BIT(13)
+#define CMN_TXPXCAL_CURRENT_RESPONSE	BIT(12)
+
+#define CMN_TXPU_ADJ_CTRL		(0x108 << 2)
+#define CMN_TXPD_ADJ_CTRL		(0x10c << 2)
+
+/*
+ * For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL,
+ *     CMN_TXPU_ADJ_CTRL, CMN_TXPDCAL_CTRL
+ *
+ * NOTE: some of these registers are documented to be 2's complement
+ * signed numbers, but then documented to be always positive.  Weird.
+ * In such a case, using CMN_CALIB_CODE_POS() avoids the unnecessary
+ * sign extension.
+ */
+#define CMN_CALIB_CODE_WIDTH	7
+#define CMN_CALIB_CODE_OFFSET	0
+#define CMN_CALIB_CODE_MASK	GENMASK(CMN_CALIB_CODE_WIDTH, 0)
+#define CMN_CALIB_CODE(x)	\
+	sign_extend32((x) >> CMN_CALIB_CODE_OFFSET, CMN_CALIB_CODE_WIDTH)
+
+#define CMN_CALIB_CODE_POS_MASK	GENMASK(CMN_CALIB_CODE_WIDTH - 1, 0)
+#define CMN_CALIB_CODE_POS(x)	\
+	(((x) >> CMN_CALIB_CODE_OFFSET) & CMN_CALIB_CODE_POS_MASK)
+
+#define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE		(0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE		(0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG		(0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD		(0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD		(0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD		(0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE		(0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE		(0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG		(0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1	(0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2	(0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL	(0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL		(0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n)		((0x4001 | ((n) << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n)		((0x4002 | ((n) << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n)		((0x4003 | ((n) << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n)	((0x4047 | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n)	((0x404c | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n)	((0x404d | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n)	((0x404e | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n)	((0x404f | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n)	((0x4050 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n)	((0x4051 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n)	((0x4052 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n)	((0x4053 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n)	((0x4054 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_000(n)	((0x4058 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_001(n)	((0x4059 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_010(n)	((0x405a | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_011(n)	((0x405b | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_100(n)	((0x405c | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_101(n)	((0x405d | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_110(n)	((0x405e | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_111(n)	((0x405f | ((n) << 9)) << 2)
+
+#define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n)			((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n)			((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n)			((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n)			((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n)		((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n)		((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n)		((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n)		((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+
+/* Use this for "n" in macros like "_MULT_XXX" to target the aux channel */
+#define AUX_CH_LANE			8
+
+#define TX_ANA_CTRL_REG_1		(0x5020 << 2)
+
+#define TXDA_DP_AUX_EN			BIT(15)
+#define AUXDA_SE_EN			BIT(14)
+#define TXDA_CAL_LATCH_EN		BIT(13)
+#define AUXDA_POLARITY			BIT(12)
+#define TXDA_DRV_POWER_ISOLATION_EN	BIT(11)
+#define TXDA_DRV_POWER_EN_PH_2_N	BIT(10)
+#define TXDA_DRV_POWER_EN_PH_1_N	BIT(9)
+#define TXDA_BGREF_EN			BIT(8)
+#define TXDA_DRV_LDO_EN			BIT(7)
+#define TXDA_DECAP_EN_DEL		BIT(6)
+#define TXDA_DECAP_EN			BIT(5)
+#define TXDA_UPHY_SUPPLY_EN_DEL		BIT(4)
+#define TXDA_UPHY_SUPPLY_EN		BIT(3)
+#define TXDA_LOW_LEAKAGE_EN		BIT(2)
+#define TXDA_DRV_IDLE_LOWI_EN		BIT(1)
+#define TXDA_DRV_CMN_MODE_EN		BIT(0)
+
+#define TX_ANA_CTRL_REG_2		(0x5021 << 2)
+
+#define AUXDA_DEBOUNCING_CLK		BIT(15)
+#define TXDA_LPBK_RECOVERED_CLK_EN	BIT(14)
+#define TXDA_LPBK_ISI_GEN_EN		BIT(13)
+#define TXDA_LPBK_SERIAL_EN		BIT(12)
+#define TXDA_LPBK_LINE_EN		BIT(11)
+#define TXDA_DRV_LDO_REDC_SINKIQ	BIT(10)
+#define XCVR_DECAP_EN_DEL		BIT(9)
+#define XCVR_DECAP_EN			BIT(8)
+#define TXDA_MPHY_ENABLE_HS_NT		BIT(7)
+#define TXDA_MPHY_SA_MODE		BIT(6)
+#define TXDA_DRV_LDO_RBYR_FB_EN		BIT(5)
+#define TXDA_DRV_RST_PULL_DOWN		BIT(4)
+#define TXDA_DRV_LDO_BG_FB_EN		BIT(3)
+#define TXDA_DRV_LDO_BG_REF_EN		BIT(2)
+#define TXDA_DRV_PREDRV_EN_DEL		BIT(1)
+#define TXDA_DRV_PREDRV_EN		BIT(0)
+
+#define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
+
+#define TX_HIGH_Z			BIT(6)
+#define TX_VMARGIN_OFFSET		3
+#define TX_VMARGIN_MASK			0x7
+#define LOW_POWER_SWING_EN		BIT(2)
+#define TX_FCM_DRV_MAIN_EN		BIT(1)
+#define TX_FCM_FULL_MARGIN		BIT(0)
+
+#define TX_DIG_CTRL_REG_2		(0x5024 << 2)
+
+#define TX_HIGH_Z_TM_EN			BIT(15)
+#define TX_RESCAL_CODE_OFFSET		0
+#define TX_RESCAL_CODE_MASK		0x3f
+
+#define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
+#define TX_ANA_CTRL_REG_3		(0x5026 << 2)
+#define TX_ANA_CTRL_REG_4		(0x5027 << 2)
+#define TX_ANA_CTRL_REG_5		(0x5029 << 2)
+
+#define RX_PSC_A0(n)			((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n)			((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n)			((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n)			((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n)			((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n)			((0x8007 | ((n) << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD		(0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD		(0x8033 << 2)
+#define RX_SDCAL0_OVRD			(0x8041 << 2)
+#define RX_SDCAL1_OVRD			(0x8049 << 2)
+#define RX_SLC_INIT			(0x806d << 2)
+#define RX_SLC_RUN			(0x806e << 2)
+#define RX_CDRLF_CNFG2			(0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n)	((0x8090 | ((n) << 9)) << 2)
+#define RX_SLC_IOP0_OVRD		(0x8101 << 2)
+#define RX_SLC_IOP1_OVRD		(0x8105 << 2)
+#define RX_SLC_QOP0_OVRD		(0x8109 << 2)
+#define RX_SLC_QOP1_OVRD		(0x810d << 2)
+#define RX_SLC_EOP0_OVRD		(0x8111 << 2)
+#define RX_SLC_EOP1_OVRD		(0x8115 << 2)
+#define RX_SLC_ION0_OVRD		(0x8119 << 2)
+#define RX_SLC_ION1_OVRD		(0x811d << 2)
+#define RX_SLC_QON0_OVRD		(0x8121 << 2)
+#define RX_SLC_QON1_OVRD		(0x8125 << 2)
+#define RX_SLC_EON0_OVRD		(0x8129 << 2)
+#define RX_SLC_EON1_OVRD		(0x812d << 2)
+#define RX_SLC_IEP0_OVRD		(0x8131 << 2)
+#define RX_SLC_IEP1_OVRD		(0x8135 << 2)
+#define RX_SLC_QEP0_OVRD		(0x8139 << 2)
+#define RX_SLC_QEP1_OVRD		(0x813d << 2)
+#define RX_SLC_EEP0_OVRD		(0x8141 << 2)
+#define RX_SLC_EEP1_OVRD		(0x8145 << 2)
+#define RX_SLC_IEN0_OVRD		(0x8149 << 2)
+#define RX_SLC_IEN1_OVRD		(0x814d << 2)
+#define RX_SLC_QEN0_OVRD		(0x8151 << 2)
+#define RX_SLC_QEN1_OVRD		(0x8155 << 2)
+#define RX_SLC_EEN0_OVRD		(0x8159 << 2)
+#define RX_SLC_EEN1_OVRD		(0x815d << 2)
+#define RX_REE_CTRL_DATA_MASK(n)	((0x81bb | ((n) << 9)) << 2)
+#define RX_DIAG_SIGDET_TUNE(n)		((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY		(0x81e1 << 2)
+
+#define PMA_LANE_CFG			(0xc000 << 2)
+#define PIPE_CMN_CTRL1			(0xc001 << 2)
+#define PIPE_CMN_CTRL2			(0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1		(0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2		(0xc004 << 2)
+#define PIPE_RCV_DET_INH		(0xc005 << 2)
+#define DP_MODE_CTL			(0xc008 << 2)
+#define DP_CLK_CTL			(0xc009 << 2)
+#define STS				(0xc00F << 2)
+#define PHY_ISO_CMN_CTRL		(0xc010 << 2)
+#define PHY_DP_TX_CTL			(0xc408 << 2)
+#define PMA_CMN_CTRL1			(0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL		(0xc810 << 2)
+#define PHY_ISOLATION_CTRL		(0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n)	((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n)	((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n)	((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n)	((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n)	((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n)	((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n)	((0xcc17 | ((n) << 6)) << 2)
+#define TX_BIST_CTRL(n)			((0x4140 | ((n) << 9)) << 2)
+#define TX_BIST_UDDWR(n)		((0x4141 | ((n) << 9)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL_CONFIG			0X30
+#define CLK_PLL_MASK			0x33
+
+#define CMN_READY			BIT(0)
+
+#define DP_PLL_CLOCK_ENABLE		BIT(2)
+#define DP_PLL_ENABLE			BIT(0)
+#define DP_PLL_DATA_RATE_RBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2		((1 << 12) | (2 << 8))
+
+#define DP_MODE_A0			BIT(4)
+#define DP_MODE_A2			BIT(6)
+#define DP_MODE_ENTER_A0		0xc101
+#define DP_MODE_ENTER_A2		0xc104
+
+#define PHY_MODE_SET_TIMEOUT		100000
+
+#define PIN_ASSIGN_C_E			0x51d9
+#define PIN_ASSIGN_D_F			0x5100
+
+#define MODE_DISCONNECT			0
+#define MODE_UFP_USB			BIT(0)
+#define MODE_DFP_USB			BIT(1)
+#define MODE_DFP_DP			BIT(2)
+
+struct usb3phy_reg {
+	u32 offset;
+	u32 enable_bit;
+	u32 write_enable;
+};
+
+/**
+ * struct rockchip_usb3phy_port_cfg - usb3-phy port configuration.
+ * @reg: the base address for usb3-phy config.
+ * @typec_conn_dir: the register of type-c connector direction.
+ * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
+ * @external_psm: the register of type-c phy external psm clock.
+ * @pipe_status: the register of type-c phy pipe status.
+ * @usb3_host_disable: the register of type-c usb3 host disable.
+ * @usb3_host_port: the register of type-c usb3 host port.
+ * @uphy_dp_sel: the register of type-c phy DP select control.
+ */
+struct rockchip_usb3phy_port_cfg {
+	unsigned int reg;
+	struct usb3phy_reg typec_conn_dir;
+	struct usb3phy_reg usb3tousb2_en;
+	struct usb3phy_reg external_psm;
+	struct usb3phy_reg pipe_status;
+	struct usb3phy_reg usb3_host_disable;
+	struct usb3phy_reg usb3_host_port;
+	struct usb3phy_reg uphy_dp_sel;
+};
+
+struct rockchip_typec_phy {
+	struct device *dev;
+	void __iomem *base;
+	struct extcon_dev *extcon;
+	struct regmap *grf_regs;
+	struct clk *clk_core;
+	struct clk *clk_ref;
+	struct reset_control *uphy_rst;
+	struct reset_control *pipe_rst;
+	struct reset_control *tcphy_rst;
+	const struct rockchip_usb3phy_port_cfg *port_cfgs;
+	/* mutex to protect access to individual PHYs */
+	struct mutex lock;
+
+	bool flip;
+	u8 mode;
+};
+
+struct phy_reg {
+	u16 value;
+	u32 addr;
+};
+
+static struct phy_reg usb3_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL0_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL0_VCOCAL_ITER },
+	{ 0xd0,		CMN_PLL0_INTDIV },
+	{ 0x4a4a,	CMN_PLL0_FRACDIV },
+	{ 0x34,		CMN_PLL0_HIGH_THR },
+	{ 0x1ee,	CMN_PLL0_SS_CTRL1 },
+	{ 0x7f03,	CMN_PLL0_SS_CTRL2 },
+	{ 0x20,		CMN_PLL0_DSM_DIAG },
+	{ 0,		CMN_DIAG_PLL0_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBL_OVRD },
+	{ 0x7,		CMN_DIAG_PLL0_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL0_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL0_LF_PROG },
+};
+
+static struct phy_reg dp_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL1_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL1_VCOCAL_ITER },
+	{ 0x30b9,	CMN_PLL1_VCOCAL_START },
+	{ 0x21c,	CMN_PLL1_INTDIV },
+	{ 0,		CMN_PLL1_FRACDIV },
+	{ 0x5,		CMN_PLL1_HIGH_THR },
+	{ 0x35,		CMN_PLL1_SS_CTRL1 },
+	{ 0x7f1e,	CMN_PLL1_SS_CTRL2 },
+	{ 0x20,		CMN_PLL1_DSM_DIAG },
+	{ 0,		CMN_PLLSM1_USER_DEF_CTRL },
+	{ 0,		CMN_DIAG_PLL1_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBL_OVRD },
+	{ 0x6,		CMN_DIAG_PLL1_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL1_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL1_LF_PROG },
+	{ 0x100,	CMN_DIAG_PLL1_PTATIS_TUNE1 },
+	{ 0x7,		CMN_DIAG_PLL1_PTATIS_TUNE2 },
+	{ 0x4,		CMN_DIAG_PLL1_INCLK_CTRL },
+};
+
+static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = {
+	{
+		.reg = 0xff7c0000,
+		.typec_conn_dir	= { 0xe580, 0, 16 },
+		.usb3tousb2_en	= { 0xe580, 3, 19 },
+		.external_psm	= { 0xe588, 14, 30 },
+		.pipe_status	= { 0xe5c0, 0, 0 },
+		.usb3_host_disable = { 0x2434, 0, 16 },
+		.usb3_host_port = { 0x2434, 12, 28 },
+		.uphy_dp_sel	= { 0x6268, 19, 19 },
+	},
+	{
+		.reg = 0xff800000,
+		.typec_conn_dir	= { 0xe58c, 0, 16 },
+		.usb3tousb2_en	= { 0xe58c, 3, 19 },
+		.external_psm	= { 0xe594, 14, 30 },
+		.pipe_status	= { 0xe5c0, 16, 16 },
+		.usb3_host_disable = { 0x2444, 0, 16 },
+		.usb3_host_port = { 0x2444, 12, 28 },
+		.uphy_dp_sel	= { 0x6268, 3, 19 },
+	},
+	{ /* sentinel */ }
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+	u32 i, rdata;
+
+	/*
+	 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+	 * cmn_psm_clk_dig_div = 2, set the clk division to 2
+	 */
+	writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+	for (i = 0; i < 4; i++) {
+		/*
+		 * The following PHY configuration assumes a 24 MHz reference
+		 * clock.
+		 */
+		writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+		writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+		writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+	}
+
+	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+	rdata &= ~CLK_PLL_MASK;
+	rdata |= CLK_PLL_CONFIG;
+	writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* load the configuration of PLL0 */
+	for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
+		writel(usb3_pll_cfg[i].value,
+		       tcphy->base + usb3_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* set the default mode to RBR */
+	writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+	       tcphy->base + DP_CLK_CTL);
+
+	/* load the configuration of PLL1 */
+	for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+		writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+	writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+	writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+	writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+	writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+	writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+	writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
+	writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+	writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+	writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	u16 rdata;
+
+	writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+	writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x98, tcphy->base + TX_PSC_A2(lane));
+	writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+	writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+	writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+	rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+	rdata = (rdata & 0x8fff) | 0x6000;
+	writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+				  const struct usb3phy_reg *reg, bool en)
+{
+	u32 mask = 1 << reg->write_enable;
+	u32 val = en << reg->enable_bit;
+
+	return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy)
+{
+	u16 tx_ana_ctrl_reg_1;
+
+	/*
+	 * Select the polarity of the xcvr:
+	 * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+	 * down aux_m)
+	 * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down
+	 * aux_p)
+	 */
+	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	if (!tcphy->flip)
+		tx_ana_ctrl_reg_1 |= AUXDA_POLARITY;
+	else
+		tx_ana_ctrl_reg_1 &= ~AUXDA_POLARITY;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+	u16 val;
+	u16 tx_ana_ctrl_reg_1;
+	u16 tx_ana_ctrl_reg_2;
+	s32 pu_calib_code, pd_calib_code;
+	s32 pu_adj, pd_adj;
+	u16 calib;
+
+	/*
+	 * Calculate calibration code as per docs: use an average of the
+	 * pull down and pull up.  Then add in adjustments.
+	 */
+	val = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+	pu_calib_code = CMN_CALIB_CODE_POS(val);
+	val = readl(tcphy->base + CMN_TXPDCAL_CTRL);
+	pd_calib_code = CMN_CALIB_CODE_POS(val);
+	val = readl(tcphy->base + CMN_TXPU_ADJ_CTRL);
+	pu_adj = CMN_CALIB_CODE(val);
+	val = readl(tcphy->base + CMN_TXPD_ADJ_CTRL);
+	pd_adj = CMN_CALIB_CODE(val);
+	calib = (pu_calib_code + pd_calib_code) / 2 + pu_adj + pd_adj;
+
+	/* disable txda_cal_latch_en for rewrite the calibration values */
+	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 &= ~TXDA_CAL_LATCH_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/* write the calibration, then delay 10 ms as sample in docs */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val &= ~(TX_RESCAL_CODE_MASK << TX_RESCAL_CODE_OFFSET);
+	val |= calib << TX_RESCAL_CODE_OFFSET;
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+	usleep_range(10000, 10050);
+
+	/*
+	 * Enable signal for latch that sample and holds calibration values.
+	 * Activate this signal for 1 clock cycle to sample new calibration
+	 * values.
+	 */
+	tx_ana_ctrl_reg_1 |= TXDA_CAL_LATCH_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	usleep_range(150, 200);
+
+	/* set TX Voltage Level and TX Deemphasis to 0 */
+	writel(0, tcphy->base + PHY_DP_TX_CTL);
+
+	/* re-enable decap */
+	tx_ana_ctrl_reg_2 = XCVR_DECAP_EN;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+	udelay(1);
+	tx_ana_ctrl_reg_2 |= XCVR_DECAP_EN_DEL;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+
+	tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	udelay(1);
+	tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN_DEL;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+	 * voltage 16'h1001 for DP-AUX-TX and RX
+	 */
+	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* re-enables Bandgap reference for LDO */
+	tx_ana_ctrl_reg_1 |= TXDA_DRV_LDO_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	udelay(5);
+	tx_ana_ctrl_reg_1 |= TXDA_BGREF_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * re-enables the transmitter pre-driver, driver data selection MUX,
+	 * and receiver detect circuits.
+	 */
+	tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+	udelay(1);
+	tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN_DEL;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	/*
+	 * Do all the undocumented magic:
+	 * - Turn on TXDA_DP_AUX_EN, whatever that is, even though sample
+	 *   never shows this going on.
+	 * - Turn on TXDA_DECAP_EN (and TXDA_DECAP_EN_DEL) even though
+	 *   docs say for aux it's always 0.
+	 * - Turn off the LDO and BGREF, which we just spent time turning
+	 *   on above (???).
+	 *
+	 * Without this magic, things seem worse.
+	 */
+	tx_ana_ctrl_reg_1 |= TXDA_DP_AUX_EN;
+	tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN;
+	tx_ana_ctrl_reg_1 &= ~TXDA_DRV_LDO_EN;
+	tx_ana_ctrl_reg_1 &= ~TXDA_BGREF_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	udelay(1);
+	tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN_DEL;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * Undo the work we did to set the LDO voltage.
+	 * This doesn't seem to help nor hurt, but it kinda goes with the
+	 * undocumented magic above.
+	 */
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* Don't set voltage swing to 400 mV peak to peak (differential) */
+	writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL);
+
+	/* Init TXDA_CYA_AUXDA_CYA for unknown magic reasons */
+	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+	/*
+	 * More undocumented magic, presumably the goal of which is to
+	 * make the "auxda_source_aux_oen" be ignored and instead to decide
+	 * about "high impedance state" based on what software puts in the
+	 * register TXDA_COEFF_CALC_CTRL (see TX_HIGH_Z).  Since we only
+	 * program that register once and we don't set the bit TX_HIGH_Z,
+	 * presumably the goal here is that we should never put the analog
+	 * driver in high impedance state.
+	 */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val |= TX_HIGH_Z_TM_EN;
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
+{
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+	int ret, i;
+	u32 val;
+
+	ret = clk_prepare_enable(tcphy->clk_core);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(tcphy->clk_ref);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+		goto err_clk_core;
+	}
+
+	reset_control_deassert(tcphy->tcphy_rst);
+
+	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+	tcphy_dp_aux_set_flip(tcphy);
+
+	tcphy_cfg_24m(tcphy);
+
+	if (mode == MODE_DFP_DP) {
+		tcphy_cfg_dp_pll(tcphy);
+		for (i = 0; i < 4; i++)
+			tcphy_dp_cfg_lane(tcphy, i);
+
+		writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
+	} else {
+		tcphy_cfg_usb3_pll(tcphy);
+		tcphy_cfg_dp_pll(tcphy);
+		if (tcphy->flip) {
+			tcphy_tx_usb3_cfg_lane(tcphy, 3);
+			tcphy_rx_usb3_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 0);
+			tcphy_dp_cfg_lane(tcphy, 1);
+		} else {
+			tcphy_tx_usb3_cfg_lane(tcphy, 0);
+			tcphy_rx_usb3_cfg_lane(tcphy, 1);
+			tcphy_dp_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 3);
+		}
+
+		writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
+	}
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	reset_control_deassert(tcphy->uphy_rst);
+
+	ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+				 val, val & CMN_READY, 10,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "wait pma ready timeout\n");
+		ret = -ETIMEDOUT;
+		goto err_wait_pma;
+	}
+
+	reset_control_deassert(tcphy->pipe_rst);
+
+	return 0;
+
+err_wait_pma:
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->tcphy_rst);
+	clk_disable_unprepare(tcphy->clk_ref);
+err_clk_core:
+	clk_disable_unprepare(tcphy->clk_core);
+	return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+	clk_disable_unprepare(tcphy->clk_core);
+	clk_disable_unprepare(tcphy->clk_ref);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+	struct extcon_dev *edev = tcphy->extcon;
+	union extcon_property_value property;
+	unsigned int id;
+	u8 mode;
+	int ret, ufp, dp;
+
+	if (!edev)
+		return MODE_DFP_USB;
+
+	ufp = extcon_get_state(edev, EXTCON_USB);
+	dp = extcon_get_state(edev, EXTCON_DISP_DP);
+
+	mode = MODE_DFP_USB;
+	id = EXTCON_USB_HOST;
+
+	if (ufp > 0) {
+		mode = MODE_UFP_USB;
+		id = EXTCON_USB;
+	} else if (dp > 0) {
+		mode = MODE_DFP_DP;
+		id = EXTCON_DISP_DP;
+
+		ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS,
+					  &property);
+		if (ret) {
+			dev_err(tcphy->dev, "get superspeed property failed\n");
+			return ret;
+		}
+
+		if (property.intval)
+			mode |= MODE_DFP_USB;
+	}
+
+	ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
+				  &property);
+	if (ret) {
+		dev_err(tcphy->dev, "get polarity property failed\n");
+		return ret;
+	}
+
+	tcphy->flip = property.intval ? 1 : 0;
+
+	return mode;
+}
+
+static int tcphy_cfg_usb3_to_usb2_only(struct rockchip_typec_phy *tcphy,
+				       bool value)
+{
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+
+	property_enable(tcphy, &cfg->usb3tousb2_en, value);
+	property_enable(tcphy, &cfg->usb3_host_disable, value);
+	property_enable(tcphy, &cfg->usb3_host_port, !value);
+
+	return 0;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+	const struct usb3phy_reg *reg = &cfg->pipe_status;
+	int timeout, new_mode, ret = 0;
+	u32 val;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	/* DP-only mode; fall back to USB2 */
+	if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) {
+		tcphy_cfg_usb3_to_usb2_only(tcphy, true);
+		goto unlock_ret;
+	}
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	if (tcphy->mode == MODE_DISCONNECT) {
+		ret = tcphy_phy_init(tcphy, new_mode);
+		if (ret)
+			goto unlock_ret;
+	}
+
+	/* wait TCPHY for pipe ready */
+	for (timeout = 0; timeout < 100; timeout++) {
+		regmap_read(tcphy->grf_regs, reg->offset, &val);
+		if (!(val & BIT(reg->enable_bit))) {
+			tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+
+			/* enable usb3 host */
+			tcphy_cfg_usb3_to_usb2_only(tcphy, false);
+			goto unlock_ret;
+		}
+		usleep_range(10, 20);
+	}
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+	ret = -ETIMEDOUT;
+
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	mutex_lock(&tcphy->lock);
+	tcphy_cfg_usb3_to_usb2_only(tcphy, false);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+	.power_on	= rockchip_usb3_phy_power_on,
+	.power_off	= rockchip_usb3_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+	int new_mode, ret = 0;
+	u32 val;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	if (!(new_mode & MODE_DFP_DP)) {
+		ret = -ENODEV;
+		goto unlock_ret;
+	}
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	/*
+	 * If the PHY has been power on, but the mode is not DP only mode,
+	 * re-init the PHY for setting all of 4 lanes to DP.
+	 */
+	if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
+		tcphy_phy_deinit(tcphy);
+		ret = tcphy_phy_init(tcphy, new_mode);
+	} else if (tcphy->mode == MODE_DISCONNECT) {
+		ret = tcphy_phy_init(tcphy, new_mode);
+	}
+	if (ret)
+		goto unlock_ret;
+
+	property_enable(tcphy, &cfg->uphy_dp_sel, 1);
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A2, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
+		goto power_on_finish;
+	}
+
+	tcphy_dp_aux_calibration(tcphy);
+
+	writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A0, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+		goto power_on_finish;
+	}
+
+	tcphy->mode |= MODE_DFP_DP;
+
+power_on_finish:
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	mutex_lock(&tcphy->lock);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	tcphy->mode &= ~MODE_DFP_DP;
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+	.power_on	= rockchip_dp_phy_power_on,
+	.power_off	= rockchip_dp_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+			  struct device *dev)
+{
+	tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+							  "rockchip,grf");
+	if (IS_ERR(tcphy->grf_regs)) {
+		dev_err(dev, "could not find grf dt node\n");
+		return PTR_ERR(tcphy->grf_regs);
+	}
+
+	tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+	if (IS_ERR(tcphy->clk_core)) {
+		dev_err(dev, "could not get uphy core clock\n");
+		return PTR_ERR(tcphy->clk_core);
+	}
+
+	tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
+	if (IS_ERR(tcphy->clk_ref)) {
+		dev_err(dev, "could not get uphy ref clock\n");
+		return PTR_ERR(tcphy->clk_ref);
+	}
+
+	tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
+	if (IS_ERR(tcphy->uphy_rst)) {
+		dev_err(dev, "no uphy_rst reset control found\n");
+		return PTR_ERR(tcphy->uphy_rst);
+	}
+
+	tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
+	if (IS_ERR(tcphy->pipe_rst)) {
+		dev_err(dev, "no pipe_rst reset control found\n");
+		return PTR_ERR(tcphy->pipe_rst);
+	}
+
+	tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
+	if (IS_ERR(tcphy->tcphy_rst)) {
+		dev_err(dev, "no tcphy_rst reset control found\n");
+		return PTR_ERR(tcphy->tcphy_rst);
+	}
+
+	return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+
+	/* select external psm clock */
+	property_enable(tcphy, &cfg->external_psm, 1);
+	property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+	tcphy->mode = MODE_DISCONNECT;
+}
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct rockchip_typec_phy *tcphy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	const struct rockchip_usb3phy_port_cfg *phy_cfgs;
+	int index, ret;
+
+	tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+	if (!tcphy)
+		return -ENOMEM;
+
+	phy_cfgs = of_device_get_match_data(dev);
+	if (!phy_cfgs) {
+		dev_err(dev, "phy configs are not assigned!\n");
+		return -EINVAL;
+	}
+
+	tcphy->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(tcphy->base))
+		return PTR_ERR(tcphy->base);
+
+	/* find out a proper config which can be matched with dt. */
+	index = 0;
+	while (phy_cfgs[index].reg) {
+		if (phy_cfgs[index].reg == res->start) {
+			tcphy->port_cfgs = &phy_cfgs[index];
+			break;
+		}
+
+		++index;
+	}
+
+	if (!tcphy->port_cfgs) {
+		dev_err(dev, "no phy-config can be matched with %pOFn node\n",
+			np);
+		return -EINVAL;
+	}
+
+	ret = tcphy_parse_dt(tcphy, dev);
+	if (ret)
+		return ret;
+
+	tcphy->dev = dev;
+	platform_set_drvdata(pdev, tcphy);
+	mutex_init(&tcphy->lock);
+
+	typec_phy_pre_init(tcphy);
+
+	tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (IS_ERR(tcphy->extcon)) {
+		if (PTR_ERR(tcphy->extcon) == -ENODEV) {
+			tcphy->extcon = NULL;
+		} else {
+			if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
+				dev_err(dev, "Invalid or missing extcon\n");
+			return PTR_ERR(tcphy->extcon);
+		}
+	}
+
+	pm_runtime_enable(dev);
+
+	for_each_available_child_of_node(np, child_np) {
+		struct phy *phy;
+
+		if (of_node_name_eq(child_np, "dp-port"))
+			phy = devm_phy_create(dev, child_np,
+					      &rockchip_dp_phy_ops);
+		else if (of_node_name_eq(child_np, "usb3-port"))
+			phy = devm_phy_create(dev, child_np,
+					      &rockchip_usb3_phy_ops);
+		else
+			continue;
+
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy: %pOFn\n",
+				child_np);
+			pm_runtime_disable(dev);
+			of_node_put(child_np);
+			return PTR_ERR(phy);
+		}
+
+		phy_set_drvdata(phy, tcphy);
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register phy provider\n");
+		pm_runtime_disable(dev);
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static void rockchip_typec_phy_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+	{
+		.compatible = "rockchip,rk3399-typec-phy",
+		.data = &rk3399_usb3phy_port_cfgs
+	},
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+	.probe		= rockchip_typec_phy_probe,
+	.remove_new	= rockchip_typec_phy_remove,
+	.driver		= {
+		.name	= "rockchip-typec-phy",
+		.of_match_table = rockchip_typec_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
new file mode 100644
index 0000000000..8454285977
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip usb PHY driver
+ *
+ * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/delay.h>
+
+static int enable_usb_uart;
+
+#define HIWORD_UPDATE(val, mask) \
+		((val) | (mask) << 16)
+
+#define UOC_CON0					0x00
+#define UOC_CON0_SIDDQ					BIT(13)
+#define UOC_CON0_DISABLE				BIT(4)
+#define UOC_CON0_COMMON_ON_N				BIT(0)
+
+#define UOC_CON2					0x08
+#define UOC_CON2_SOFT_CON_SEL				BIT(2)
+
+#define UOC_CON3					0x0c
+/* bits present on rk3188 and rk3288 phys */
+#define UOC_CON3_UTMI_TERMSEL_FULLSPEED			BIT(5)
+#define UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC		(1 << 3)
+#define UOC_CON3_UTMI_XCVRSEELCT_MASK			(3 << 3)
+#define UOC_CON3_UTMI_OPMODE_NODRIVING			(1 << 1)
+#define UOC_CON3_UTMI_OPMODE_MASK			(3 << 1)
+#define UOC_CON3_UTMI_SUSPENDN				BIT(0)
+
+struct rockchip_usb_phys {
+	int reg;
+	const char *pll_name;
+};
+
+struct rockchip_usb_phy_base;
+struct rockchip_usb_phy_pdata {
+	struct rockchip_usb_phys *phys;
+	int (*init_usb_uart)(struct regmap *grf,
+			     const struct rockchip_usb_phy_pdata *pdata);
+	int usb_uart_phy;
+};
+
+struct rockchip_usb_phy_base {
+	struct device *dev;
+	struct regmap *reg_base;
+	const struct rockchip_usb_phy_pdata *pdata;
+};
+
+struct rockchip_usb_phy {
+	struct rockchip_usb_phy_base *base;
+	struct device_node *np;
+	unsigned int	reg_offset;
+	struct clk	*clk;
+	struct clk      *clk480m;
+	struct clk_hw	clk480m_hw;
+	struct phy	*phy;
+	bool		uart_enabled;
+	struct reset_control *reset;
+	struct regulator *vbus;
+};
+
+static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
+					   bool siddq)
+{
+	u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ);
+
+	return regmap_write(phy->base->reg_base, phy->reg_offset, val);
+}
+
+static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	return 480000000;
+}
+
+static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
+{
+	struct rockchip_usb_phy *phy = container_of(hw,
+						    struct rockchip_usb_phy,
+						    clk480m_hw);
+
+	if (phy->vbus)
+		regulator_disable(phy->vbus);
+
+	/* Power down usb phy analog blocks by set siddq 1 */
+	rockchip_usb_phy_power(phy, 1);
+}
+
+static int rockchip_usb_phy480m_enable(struct clk_hw *hw)
+{
+	struct rockchip_usb_phy *phy = container_of(hw,
+						    struct rockchip_usb_phy,
+						    clk480m_hw);
+
+	/* Power up usb phy analog blocks by set siddq 0 */
+	return rockchip_usb_phy_power(phy, 0);
+}
+
+static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw)
+{
+	struct rockchip_usb_phy *phy = container_of(hw,
+						    struct rockchip_usb_phy,
+						    clk480m_hw);
+	int ret;
+	u32 val;
+
+	ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val);
+	if (ret < 0)
+		return ret;
+
+	return (val & UOC_CON0_SIDDQ) ? 0 : 1;
+}
+
+static const struct clk_ops rockchip_usb_phy480m_ops = {
+	.enable = rockchip_usb_phy480m_enable,
+	.disable = rockchip_usb_phy480m_disable,
+	.is_enabled = rockchip_usb_phy480m_is_enabled,
+	.recalc_rate = rockchip_usb_phy480m_recalc_rate,
+};
+
+static int rockchip_usb_phy_power_off(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+	if (phy->uart_enabled)
+		return -EBUSY;
+
+	clk_disable_unprepare(phy->clk480m);
+
+	return 0;
+}
+
+static int rockchip_usb_phy_power_on(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+	if (phy->uart_enabled)
+		return -EBUSY;
+
+	if (phy->vbus) {
+		int ret;
+
+		ret = regulator_enable(phy->vbus);
+		if (ret)
+			return ret;
+	}
+
+	return clk_prepare_enable(phy->clk480m);
+}
+
+static int rockchip_usb_phy_reset(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+	if (phy->reset) {
+		reset_control_assert(phy->reset);
+		udelay(10);
+		reset_control_deassert(phy->reset);
+	}
+
+	return 0;
+}
+
+static const struct phy_ops ops = {
+	.power_on	= rockchip_usb_phy_power_on,
+	.power_off	= rockchip_usb_phy_power_off,
+	.reset		= rockchip_usb_phy_reset,
+	.owner		= THIS_MODULE,
+};
+
+static void rockchip_usb_phy_action(void *data)
+{
+	struct rockchip_usb_phy *rk_phy = data;
+
+	if (!rk_phy->uart_enabled) {
+		of_clk_del_provider(rk_phy->np);
+		clk_unregister(rk_phy->clk480m);
+	}
+
+	if (rk_phy->clk)
+		clk_put(rk_phy->clk);
+}
+
+static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
+				 struct device_node *child)
+{
+	struct rockchip_usb_phy *rk_phy;
+	unsigned int reg_offset;
+	const char *clk_name;
+	struct clk_init_data init;
+	int err, i;
+
+	rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL);
+	if (!rk_phy)
+		return -ENOMEM;
+
+	rk_phy->base = base;
+	rk_phy->np = child;
+
+	if (of_property_read_u32(child, "reg", &reg_offset)) {
+		dev_err(base->dev, "missing reg property in node %pOFn\n",
+			child);
+		return -EINVAL;
+	}
+
+	rk_phy->reset = of_reset_control_get(child, "phy-reset");
+	if (IS_ERR(rk_phy->reset))
+		rk_phy->reset = NULL;
+
+	rk_phy->reg_offset = reg_offset;
+
+	rk_phy->clk = of_clk_get_by_name(child, "phyclk");
+	if (IS_ERR(rk_phy->clk))
+		rk_phy->clk = NULL;
+
+	i = 0;
+	init.name = NULL;
+	while (base->pdata->phys[i].reg) {
+		if (base->pdata->phys[i].reg == reg_offset) {
+			init.name = base->pdata->phys[i].pll_name;
+			break;
+		}
+		i++;
+	}
+
+	if (!init.name) {
+		dev_err(base->dev, "phy data not found\n");
+		return -EINVAL;
+	}
+
+	if (enable_usb_uart && base->pdata->usb_uart_phy == i) {
+		dev_dbg(base->dev, "phy%d used as uart output\n", i);
+		rk_phy->uart_enabled = true;
+	} else {
+		if (rk_phy->clk) {
+			clk_name = __clk_get_name(rk_phy->clk);
+			init.flags = 0;
+			init.parent_names = &clk_name;
+			init.num_parents = 1;
+		} else {
+			init.flags = 0;
+			init.parent_names = NULL;
+			init.num_parents = 0;
+		}
+
+		init.ops = &rockchip_usb_phy480m_ops;
+		rk_phy->clk480m_hw.init = &init;
+
+		rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
+		if (IS_ERR(rk_phy->clk480m)) {
+			err = PTR_ERR(rk_phy->clk480m);
+			goto err_clk;
+		}
+
+		err = of_clk_add_provider(child, of_clk_src_simple_get,
+					rk_phy->clk480m);
+		if (err < 0)
+			goto err_clk_prov;
+	}
+
+	err = devm_add_action_or_reset(base->dev, rockchip_usb_phy_action,
+				       rk_phy);
+	if (err)
+		return err;
+
+	rk_phy->phy = devm_phy_create(base->dev, child, &ops);
+	if (IS_ERR(rk_phy->phy)) {
+		dev_err(base->dev, "failed to create PHY\n");
+		return PTR_ERR(rk_phy->phy);
+	}
+	phy_set_drvdata(rk_phy->phy, rk_phy);
+
+	rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus");
+	if (IS_ERR(rk_phy->vbus)) {
+		if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER)
+			return PTR_ERR(rk_phy->vbus);
+		rk_phy->vbus = NULL;
+	}
+
+	/*
+	 * When acting as uart-pipe, just keep clock on otherwise
+	 * only power up usb phy when it use, so disable it when init
+	 */
+	if (rk_phy->uart_enabled)
+		return clk_prepare_enable(rk_phy->clk);
+	else
+		return rockchip_usb_phy_power(rk_phy, 1);
+
+err_clk_prov:
+	if (!rk_phy->uart_enabled)
+		clk_unregister(rk_phy->clk480m);
+err_clk:
+	if (rk_phy->clk)
+		clk_put(rk_phy->clk);
+	return err;
+}
+
+static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
+	.phys = (struct rockchip_usb_phys[]){
+		{ .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" },
+		{ .reg = 0x188, .pll_name = "sclk_otgphy1_480m" },
+		{ /* sentinel */ }
+	},
+};
+
+static int __init rockchip_init_usb_uart_common(struct regmap *grf,
+				const struct rockchip_usb_phy_pdata *pdata)
+{
+	int regoffs = pdata->phys[pdata->usb_uart_phy].reg;
+	int ret;
+	u32 val;
+
+	/*
+	 * COMMON_ON and DISABLE settings are described in the TRM,
+	 * but were not present in the original code.
+	 * Also disable the analog phy components to save power.
+	 */
+	val = HIWORD_UPDATE(UOC_CON0_COMMON_ON_N
+				| UOC_CON0_DISABLE
+				| UOC_CON0_SIDDQ,
+			    UOC_CON0_COMMON_ON_N
+				| UOC_CON0_DISABLE
+				| UOC_CON0_SIDDQ);
+	ret = regmap_write(grf, regoffs + UOC_CON0, val);
+	if (ret)
+		return ret;
+
+	val = HIWORD_UPDATE(UOC_CON2_SOFT_CON_SEL,
+			    UOC_CON2_SOFT_CON_SEL);
+	ret = regmap_write(grf, regoffs + UOC_CON2, val);
+	if (ret)
+		return ret;
+
+	val = HIWORD_UPDATE(UOC_CON3_UTMI_OPMODE_NODRIVING
+				| UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC
+				| UOC_CON3_UTMI_TERMSEL_FULLSPEED,
+			    UOC_CON3_UTMI_SUSPENDN
+				| UOC_CON3_UTMI_OPMODE_MASK
+				| UOC_CON3_UTMI_XCVRSEELCT_MASK
+				| UOC_CON3_UTMI_TERMSEL_FULLSPEED);
+	ret = regmap_write(grf, UOC_CON3, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+#define RK3188_UOC0_CON0				0x10c
+#define RK3188_UOC0_CON0_BYPASSSEL			BIT(9)
+#define RK3188_UOC0_CON0_BYPASSDMEN			BIT(8)
+
+/*
+ * Enable the bypass of uart2 data through the otg usb phy.
+ * See description of rk3288-variant for details.
+ */
+static int __init rk3188_init_usb_uart(struct regmap *grf,
+				const struct rockchip_usb_phy_pdata *pdata)
+{
+	u32 val;
+	int ret;
+
+	ret = rockchip_init_usb_uart_common(grf, pdata);
+	if (ret)
+		return ret;
+
+	val = HIWORD_UPDATE(RK3188_UOC0_CON0_BYPASSSEL
+				| RK3188_UOC0_CON0_BYPASSDMEN,
+			    RK3188_UOC0_CON0_BYPASSSEL
+				| RK3188_UOC0_CON0_BYPASSDMEN);
+	ret = regmap_write(grf, RK3188_UOC0_CON0, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct rockchip_usb_phy_pdata rk3188_pdata = {
+	.phys = (struct rockchip_usb_phys[]){
+		{ .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
+		{ .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
+		{ /* sentinel */ }
+	},
+	.init_usb_uart = rk3188_init_usb_uart,
+	.usb_uart_phy = 0,
+};
+
+#define RK3288_UOC0_CON3				0x32c
+#define RK3288_UOC0_CON3_BYPASSDMEN			BIT(6)
+#define RK3288_UOC0_CON3_BYPASSSEL			BIT(7)
+
+/*
+ * Enable the bypass of uart2 data through the otg usb phy.
+ * Original description in the TRM.
+ * 1. Disable the OTG block by setting OTGDISABLE0 to 1’b1.
+ * 2. Disable the pull-up resistance on the D+ line by setting
+ *    OPMODE0[1:0] to 2’b01.
+ * 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend
+ *    mode, set COMMONONN to 1’b1.
+ * 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1’b0.
+ * 5. Set BYPASSSEL0 to 1’b1.
+ * 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0.
+ * To receive data, monitor FSVPLUS0.
+ *
+ * The actual code in the vendor kernel does some things differently.
+ */
+static int __init rk3288_init_usb_uart(struct regmap *grf,
+				const struct rockchip_usb_phy_pdata *pdata)
+{
+	u32 val;
+	int ret;
+
+	ret = rockchip_init_usb_uart_common(grf, pdata);
+	if (ret)
+		return ret;
+
+	val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL
+				| RK3288_UOC0_CON3_BYPASSDMEN,
+			    RK3288_UOC0_CON3_BYPASSSEL
+				| RK3288_UOC0_CON3_BYPASSDMEN);
+	ret = regmap_write(grf, RK3288_UOC0_CON3, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct rockchip_usb_phy_pdata rk3288_pdata = {
+	.phys = (struct rockchip_usb_phys[]){
+		{ .reg = 0x320, .pll_name = "sclk_otgphy0_480m" },
+		{ .reg = 0x334, .pll_name = "sclk_otgphy1_480m" },
+		{ .reg = 0x348, .pll_name = "sclk_otgphy2_480m" },
+		{ /* sentinel */ }
+	},
+	.init_usb_uart = rk3288_init_usb_uart,
+	.usb_uart_phy = 0,
+};
+
+static int rockchip_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_usb_phy_base *phy_base;
+	struct phy_provider *phy_provider;
+	const struct of_device_id *match;
+	struct device_node *child;
+	int err;
+
+	phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL);
+	if (!phy_base)
+		return -ENOMEM;
+
+	match = of_match_device(dev->driver->of_match_table, dev);
+	if (!match || !match->data) {
+		dev_err(dev, "missing phy data\n");
+		return -EINVAL;
+	}
+
+	phy_base->pdata = match->data;
+
+	phy_base->dev = dev;
+	phy_base->reg_base = ERR_PTR(-ENODEV);
+	if (dev->parent && dev->parent->of_node)
+		phy_base->reg_base = syscon_node_to_regmap(
+						dev->parent->of_node);
+	if (IS_ERR(phy_base->reg_base))
+		phy_base->reg_base = syscon_regmap_lookup_by_phandle(
+						dev->of_node, "rockchip,grf");
+	if (IS_ERR(phy_base->reg_base)) {
+		dev_err(&pdev->dev, "Missing rockchip,grf property\n");
+		return PTR_ERR(phy_base->reg_base);
+	}
+
+	for_each_available_child_of_node(dev->of_node, child) {
+		err = rockchip_usb_phy_init(phy_base, child);
+		if (err) {
+			of_node_put(child);
+			return err;
+		}
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata },
+	{ .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata },
+	{ .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids);
+
+static struct platform_driver rockchip_usb_driver = {
+	.probe		= rockchip_usb_phy_probe,
+	.driver		= {
+		.name	= "rockchip-usb-phy",
+		.of_match_table = rockchip_usb_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_usb_driver);
+
+#ifndef MODULE
+static int __init rockchip_init_usb_uart(void)
+{
+	const struct of_device_id *match;
+	const struct rockchip_usb_phy_pdata *data;
+	struct device_node *np;
+	struct regmap *grf;
+	int ret;
+
+	if (!enable_usb_uart)
+		return 0;
+
+	np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids,
+					     &match);
+	if (!np) {
+		pr_err("%s: failed to find usbphy node\n", __func__);
+		return -ENOTSUPP;
+	}
+
+	pr_debug("%s: using settings for %s\n", __func__, match->compatible);
+	data = match->data;
+
+	if (!data->init_usb_uart) {
+		pr_err("%s: usb-uart not available on %s\n",
+		       __func__, match->compatible);
+		return -ENOTSUPP;
+	}
+
+	grf = ERR_PTR(-ENODEV);
+	if (np->parent)
+		grf = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(grf))
+		grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(grf)) {
+		pr_err("%s: Missing rockchip,grf property, %lu\n",
+		       __func__, PTR_ERR(grf));
+		return PTR_ERR(grf);
+	}
+
+	ret = data->init_usb_uart(grf, data);
+	if (ret) {
+		pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
+		enable_usb_uart = 0;
+		return ret;
+	}
+
+	return 0;
+}
+early_initcall(rockchip_init_usb_uart);
+
+static int __init rockchip_usb_uart(char *buf)
+{
+	enable_usb_uart = true;
+	return 0;
+}
+early_param("rockchip.usb_uart", rockchip_usb_uart);
+#endif
+
+MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");