summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/bcm/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/pinctrl/bcm/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/pinctrl/bcm/Kconfig')
-rw-r--r--drivers/pinctrl/bcm/Kconfig216
1 files changed, 216 insertions, 0 deletions
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
new file mode 100644
index 0000000000..35b51ce429
--- /dev/null
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Broadcom pinctrl drivers
+#
+
+config PINCTRL_BCM281XX
+ bool "Broadcom BCM281xx pinctrl driver"
+ depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select REGMAP_MMIO
+ default ARCH_BCM_MOBILE
+ help
+ Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+ for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+ BCM28145, and BCM28155 SoCs. This driver requires the pinctrl
+ framework. GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_BCM2835
+ tristate "Broadcom BCM2835 GPIO (with PINCONF) driver"
+ depends on OF && (ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST)
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ default ARCH_BCM2835 || ARCH_BRCMSTB
+ help
+ Say Y here to enable the Broadcom BCM2835 GPIO driver.
+
+config PINCTRL_BCM4908
+ tristate "Broadcom BCM4908 pinmux driver"
+ depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ default ARCH_BCMBCA
+ help
+ Driver for BCM4908 family SoCs with integrated pin controller.
+
+ If compiled as module it will be called pinctrl-bcm4908.
+
+config PINCTRL_BCM63XX
+ bool
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GPIOLIB
+ select REGMAP
+ select GPIO_REGMAP
+
+config PINCTRL_BCM6318
+ bool "Broadcom BCM6318 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ depends on OF
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6318 GPIO driver.
+
+config PINCTRL_BCM6328
+ bool "Broadcom BCM6328 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ depends on OF
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6328 GPIO driver.
+
+config PINCTRL_BCM6358
+ bool "Broadcom BCM6358 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ depends on OF
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6358 GPIO driver.
+
+config PINCTRL_BCM6362
+ bool "Broadcom BCM6362 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ depends on OF
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6362 GPIO driver.
+
+config PINCTRL_BCM6368
+ bool "Broadcom BCM6368 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ depends on OF
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6368 GPIO driver.
+
+config PINCTRL_BCM63268
+ bool "Broadcom BCM63268 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ depends on OF
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM63268 GPIO driver.
+
+config PINCTRL_IPROC_GPIO
+ bool "Broadcom iProc GPIO (with PINCONF) driver"
+ depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select GPIOLIB_IRQCHIP
+ select PINCONF
+ select GENERIC_PINCONF
+ default ARCH_BCM_IPROC
+ help
+ Say yes here to enable the Broadcom iProc GPIO driver.
+
+ The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use
+ same GPIO Controller IP hence this driver could be used for all.
+
+ The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
+ GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and
+ the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
+ supported by this driver.
+
+ The Broadcom NSP has two GPIO controllers including the ChipcommonA
+ GPIO, the ChipcommonB GPIO. Later controller is supported by this
+ driver.
+
+ The Broadcom NS2 has two GPIO controller including the CRMU GPIO,
+ the ChipcommonG GPIO. Both controllers are supported by this driver.
+
+ The Broadcom Stingray GPIO controllers are supported by this driver.
+
+ All above SoCs GPIO controllers support basic PINCONF functions such
+ as bias pull up, pull down, and drive strength configurations, when
+ these pins are muxed to GPIO.
+
+ It provides the framework where pins from the individual GPIO can be
+ individually muxed to GPIO function, through interaction with the
+ SoCs IOMUX controller. This features could be used only on SoCs which
+ support individual pin muxing.
+
+config PINCTRL_CYGNUS_MUX
+ bool "Broadcom Cygnus IOMUX driver"
+ depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ depends on OF
+ select PINMUX
+ select GENERIC_PINCONF
+ default ARCH_BCM_CYGNUS
+ help
+ Say yes here to enable the Broadcom Cygnus IOMUX driver.
+
+ The Broadcom Cygnus IOMUX driver supports group based IOMUX
+ configuration, with the exception that certain individual pins
+ can be overridden to GPIO function
+
+config PINCTRL_NS
+ bool "Broadcom Northstar pins driver"
+ depends on OF && (ARCH_BCM_5301X || COMPILE_TEST)
+ select PINMUX
+ select GENERIC_PINCONF
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ default ARCH_BCM_5301X
+ help
+ Say yes here to enable the Broadcom NS SoC pins driver.
+
+ The Broadcom Northstar pins driver supports muxing multi-purpose pins
+ that can be used for various functions (e.g. SPI, I2C, UART) as well
+ as GPIOs.
+
+config PINCTRL_NSP_GPIO
+ bool "Broadcom NSP GPIO (with PINCONF) driver"
+ depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST)
+ select GPIOLIB_IRQCHIP
+ select PINCONF
+ select GENERIC_PINCONF
+ default ARCH_BCM_NSP
+ help
+ Say yes here to enable the Broadcom NSP GPIO driver.
+
+ The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is
+ supported by this driver.
+
+ The ChipcommonA GPIO controller support basic PINCONF functions such
+ as bias pull up, pull down, and drive strength configurations, when
+ these pins are muxed to GPIO.
+
+config PINCTRL_NS2_MUX
+ bool "Broadcom Northstar2 pinmux driver"
+ depends on OF
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select PINMUX
+ select GENERIC_PINCONF
+ default ARM64 && ARCH_BCM_IPROC
+ help
+ Say yes here to enable the Broadcom NS2 MUX driver.
+
+ The Broadcom Northstar2 IOMUX driver supports group based IOMUX
+ configuration.
+
+config PINCTRL_NSP_MUX
+ bool "Broadcom NSP IOMUX driver"
+ depends on (ARCH_BCM_NSP || COMPILE_TEST)
+ depends on OF
+ select PINMUX
+ select GENERIC_PINCONF
+ default ARCH_BCM_NSP
+ help
+ Say yes here to enable the Broadcom NSP SOC IOMUX driver.
+
+ The Broadcom Northstar Plus IOMUX driver supports pin based IOMUX
+ configuration, with certain individual pins can be overridden
+ to GPIO function.