Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 312 insertions, 0 deletions

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
new file mode 100644
index 0000000000..11afa12a96
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
@@ -0,0 +1,312 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ */
+
+#ifndef __PINCTRL_MTK_COMMON_H
+#define __PINCTRL_MTK_COMMON_H
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/regmap.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "mtk-eint.h"
+
+#define NO_EINT_SUPPORT    255
+#define MT_EDGE_SENSITIVE           0
+#define MT_LEVEL_SENSITIVE          1
+#define EINT_DBNC_SET_DBNC_BITS     4
+#define EINT_DBNC_RST_BIT           (0x1 << 1)
+#define EINT_DBNC_SET_EN            (0x1 << 0)
+
+#define MTK_PINCTRL_NOT_SUPPORT	(0xffff)
+
+struct mtk_desc_function {
+	const char *name;
+	unsigned char muxval;
+};
+
+struct mtk_desc_eint {
+	unsigned char eintmux;
+	unsigned char eintnum;
+};
+
+struct mtk_desc_pin {
+	struct pinctrl_pin_desc	pin;
+	const struct mtk_desc_eint eint;
+	const struct mtk_desc_function	*functions;
+};
+
+#define MTK_PIN(_pin, _pad, _chip, _eint, ...)		\
+	{							\
+		.pin = _pin,					\
+		.eint = _eint,					\
+		.functions = (struct mtk_desc_function[]){	\
+			__VA_ARGS__, { } },			\
+	}
+
+#define MTK_EINT_FUNCTION(_eintmux, _eintnum)				\
+	{							\
+		.eintmux = _eintmux,					\
+		.eintnum = _eintnum,					\
+	}
+
+#define MTK_FUNCTION(_val, _name)				\
+	{							\
+		.muxval = _val,					\
+		.name = _name,					\
+	}
+
+#define SET_ADDR(x, y)  (x + (y->devdata->port_align))
+#define CLR_ADDR(x, y)  (x + (y->devdata->port_align << 1))
+
+struct mtk_pinctrl_group {
+	const char	*name;
+	unsigned long	config;
+	unsigned	pin;
+};
+
+/**
+ * struct mtk_drv_group_desc - Provide driving group data.
+ * @max_drv: The maximum current of this group.
+ * @min_drv: The minimum current of this group.
+ * @low_bit: The lowest bit of this group.
+ * @high_bit: The highest bit of this group.
+ * @step: The step current of this group.
+ */
+struct mtk_drv_group_desc {
+	unsigned char min_drv;
+	unsigned char max_drv;
+	unsigned char low_bit;
+	unsigned char high_bit;
+	unsigned char step;
+};
+
+#define MTK_DRV_GRP(_min, _max, _low, _high, _step)	\
+	{	\
+		.min_drv = _min,	\
+		.max_drv = _max,	\
+		.low_bit = _low,	\
+		.high_bit = _high,	\
+		.step = _step,		\
+	}
+
+/**
+ * struct mtk_pin_drv_grp - Provide each pin driving info.
+ * @pin: The pin number.
+ * @offset: The offset of driving register for this pin.
+ * @bit: The bit of driving register for this pin.
+ * @grp: The group for this pin belongs to.
+ */
+struct mtk_pin_drv_grp {
+	unsigned short pin;
+	unsigned short offset;
+	unsigned char bit;
+	unsigned char grp;
+};
+
+#define MTK_PIN_DRV_GRP(_pin, _offset, _bit, _grp)	\
+	{	\
+		.pin = _pin,	\
+		.offset = _offset,	\
+		.bit = _bit,	\
+		.grp = _grp,	\
+	}
+
+/**
+ * struct mtk_pin_spec_pupd_set_samereg
+ * - For special pins' pull up/down setting which resides in same register
+ * @pin: The pin number.
+ * @offset: The offset of special pull up/down setting register.
+ * @pupd_bit: The pull up/down bit in this register.
+ * @r0_bit: The r0 bit of pull resistor.
+ * @r1_bit: The r1 bit of pull resistor.
+ */
+struct mtk_pin_spec_pupd_set_samereg {
+	unsigned short pin;
+	unsigned short offset;
+	unsigned char pupd_bit;
+	unsigned char r1_bit;
+	unsigned char r0_bit;
+};
+
+#define MTK_PIN_PUPD_SPEC_SR(_pin, _offset, _pupd, _r1, _r0)	\
+	{	\
+		.pin = _pin,	\
+		.offset = _offset,	\
+		.pupd_bit = _pupd,	\
+		.r1_bit = _r1,		\
+		.r0_bit = _r0,		\
+	}
+
+/**
+ * struct mtk_pin_ies_set - For special pins' ies and smt setting.
+ * @start: The start pin number of those special pins.
+ * @end: The end pin number of those special pins.
+ * @offset: The offset of special setting register.
+ * @bit: The bit of special setting register.
+ */
+struct mtk_pin_ies_smt_set {
+	unsigned short start;
+	unsigned short end;
+	unsigned short offset;
+	unsigned char bit;
+};
+
+#define MTK_PIN_IES_SMT_SPEC(_start, _end, _offset, _bit)	\
+	{	\
+		.start = _start,	\
+		.end = _end,	\
+		.bit = _bit,	\
+		.offset = _offset,	\
+	}
+
+struct mtk_eint_offsets {
+	const char *name;
+	unsigned int  stat;
+	unsigned int  ack;
+	unsigned int  mask;
+	unsigned int  mask_set;
+	unsigned int  mask_clr;
+	unsigned int  sens;
+	unsigned int  sens_set;
+	unsigned int  sens_clr;
+	unsigned int  soft;
+	unsigned int  soft_set;
+	unsigned int  soft_clr;
+	unsigned int  pol;
+	unsigned int  pol_set;
+	unsigned int  pol_clr;
+	unsigned int  dom_en;
+	unsigned int  dbnc_ctrl;
+	unsigned int  dbnc_set;
+	unsigned int  dbnc_clr;
+	u8  port_mask;
+	u8  ports;
+};
+
+/**
+ * struct mtk_pinctrl_devdata - Provide HW GPIO related data.
+ * @pins: An array describing all pins the pin controller affects.
+ * @npins: The number of entries in @pins.
+ *
+ * @grp_desc: The driving group info.
+ * @pin_drv_grp: The driving group for all pins.
+ * @spec_ies: Special pin setting for input enable
+ * @n_spec_ies: Number of entries in spec_ies
+ * @spec_pupd: Special pull up/down setting
+ * @n_spec_pupd: Number of entries in spec_pupd
+ * @spec_smt: Special pin setting for schmitt
+ * @n_spec_smt: Number of entries in spec_smt
+ * @spec_pull_set: Each SoC may have special pins for pull up/down setting,
+ *  these pins' pull setting are very different, they have separate pull
+ *  up/down bit, R0 and R1 resistor bit, so they need special pull setting.
+ *  If special setting is success, this should return 0, otherwise it should
+ *  return non-zero value.
+ * @spec_ies_smt_set: Some pins are irregular, their input enable and smt
+ * control register are discontinuous, but they are mapping together. That
+ * means when user set smt, input enable is set at the same time. So they
+ * also need special control. If special control is success, this should
+ * return 0, otherwise return non-zero value.
+ * @spec_pinmux_set: In some cases, there are two pinmux functions share
+ * the same value in the same segment of pinmux control register. If user
+ * want to use one of the two functions, they need an extra bit setting to
+ * select the right one.
+ * @spec_dir_set: In very few SoCs, direction control registers are not
+ * arranged continuously, they may be cut to parts. So they need special
+ * dir setting.
+ * @mt8365_set_clr_mode: In mt8365, some pins won't set correcty because they
+ * need to use the main R/W register to read/update/write the modes instead of
+ * the SET/CLR register.
+ *
+ * @dir_offset: The direction register offset.
+ * @pullen_offset: The pull-up/pull-down enable register offset.
+ * @pinmux_offset: The pinmux register offset.
+ *
+ * @type1_start: Some chips have two base addresses for pull select register,
+ *  that means some pins use the first address and others use the second. This
+ *  member record the start of pin number to use the second address.
+ * @type1_end: The end of pin number to use the second address.
+ *
+ * @port_shf: The shift between two registers.
+ * @port_mask: The mask of register.
+ * @port_align: Provide clear register and set register step.
+ */
+struct mtk_pinctrl_devdata {
+	const struct mtk_desc_pin	*pins;
+	unsigned int				npins;
+	const struct mtk_drv_group_desc	*grp_desc;
+	unsigned int	n_grp_cls;
+	const struct mtk_pin_drv_grp	*pin_drv_grp;
+	unsigned int	n_pin_drv_grps;
+	const struct mtk_pin_ies_smt_set *spec_ies;
+	unsigned int n_spec_ies;
+	const struct mtk_pin_spec_pupd_set_samereg *spec_pupd;
+	unsigned int n_spec_pupd;
+	const struct mtk_pin_ies_smt_set *spec_smt;
+	unsigned int n_spec_smt;
+	int (*spec_pull_set)(struct regmap *regmap,
+			const struct mtk_pinctrl_devdata *devdata,
+			unsigned int pin, bool isup, unsigned int r1r0);
+	int (*spec_ies_smt_set)(struct regmap *reg,
+			const struct mtk_pinctrl_devdata *devdata,
+			unsigned int pin, int value, enum pin_config_param arg);
+	void (*spec_pinmux_set)(struct regmap *reg, unsigned int pin,
+			unsigned int mode);
+	void (*spec_dir_set)(unsigned int *reg_addr, unsigned int pin);
+	int (*mt8365_set_clr_mode)(struct regmap *regmap,
+			unsigned int bit, unsigned int reg_pullen, unsigned int reg_pullsel,
+			bool enable, bool isup);
+	unsigned int dir_offset;
+	unsigned int ies_offset;
+	unsigned int smt_offset;
+	unsigned int pullen_offset;
+	unsigned int pullsel_offset;
+	unsigned int drv_offset;
+	unsigned int dout_offset;
+	unsigned int din_offset;
+	unsigned int pinmux_offset;
+	unsigned short type1_start;
+	unsigned short type1_end;
+	unsigned char  port_shf;
+	unsigned char  port_mask;
+	unsigned char  port_align;
+	struct mtk_eint_hw eint_hw;
+	struct mtk_eint_regs *eint_regs;
+	unsigned int mode_mask;
+	unsigned int mode_per_reg;
+	unsigned int mode_shf;
+};
+
+struct mtk_pinctrl {
+	struct regmap	*regmap1;
+	struct regmap	*regmap2;
+	struct pinctrl_desc pctl_desc;
+	struct device           *dev;
+	struct gpio_chip	*chip;
+	struct mtk_pinctrl_group	*groups;
+	unsigned			ngroups;
+	const char          **grp_names;
+	struct pinctrl_dev      *pctl_dev;
+	const struct mtk_pinctrl_devdata  *devdata;
+	struct mtk_eint *eint;
+};
+
+int mtk_pctrl_init(struct platform_device *pdev,
+		const struct mtk_pinctrl_devdata *data,
+		struct regmap *regmap);
+
+int mtk_pctrl_common_probe(struct platform_device *pdev);
+
+int mtk_pctrl_spec_pull_set_samereg(struct regmap *regmap,
+		const struct mtk_pinctrl_devdata *devdata,
+		unsigned int pin, bool isup, unsigned int r1r0);
+
+int mtk_pconf_spec_set_ies_smt_range(struct regmap *regmap,
+		const struct mtk_pinctrl_devdata *devdata,
+		unsigned int pin, int value, enum pin_config_param arg);
+
+extern const struct dev_pm_ops mtk_eint_pm_ops;
+
+#endif /* __PINCTRL_MTK_COMMON_H */