Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 45 insertions, 25 deletions

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 9651aed048..0d98008e33 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -186,6 +186,41 @@ static int lpi_config_get(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static int lpi_config_set_slew_rate(struct lpi_pinctrl *pctrl,
+				    const struct lpi_pingroup *g,
+				    unsigned int group, unsigned int slew)
+{
+	unsigned long sval;
+	void __iomem *reg;
+	int slew_offset;
+
+	if (slew > LPI_SLEW_RATE_MAX) {
+		dev_err(pctrl->dev, "invalid slew rate %u for pin: %d\n",
+			slew, group);
+		return -EINVAL;
+	}
+
+	slew_offset = g->slew_offset;
+	if (slew_offset == LPI_NO_SLEW)
+		return 0;
+
+	if (pctrl->data->flags & LPI_FLAG_SLEW_RATE_SAME_REG)
+		reg = pctrl->tlmm_base + LPI_TLMM_REG_OFFSET * group + LPI_GPIO_CFG_REG;
+	else
+		reg = pctrl->slew_base + LPI_SLEW_RATE_CTL_REG;
+
+	mutex_lock(&pctrl->lock);
+
+	sval = ioread32(reg);
+	sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
+	sval |= slew << slew_offset;
+	iowrite32(sval, reg);
+
+	mutex_unlock(&pctrl->lock);
+
+	return 0;
+}
+
 static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 			  unsigned long *configs, unsigned int nconfs)
 {
@@ -193,8 +228,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 	unsigned int param, arg, pullup = LPI_GPIO_BIAS_DISABLE, strength = 2;
 	bool value, output_enabled = false;
 	const struct lpi_pingroup *g;
-	unsigned long sval;
-	int i, slew_offset;
+	int i, ret;
 	u32 val;
 
 	g = &pctrl->data->groups[group];
@@ -226,24 +260,9 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 			strength = arg;
 			break;
 		case PIN_CONFIG_SLEW_RATE:
-			if (arg > LPI_SLEW_RATE_MAX) {
-				dev_err(pctldev->dev, "invalid slew rate %u for pin: %d\n",
-					arg, group);
-				return -EINVAL;
-			}
-
-			slew_offset = g->slew_offset;
-			if (slew_offset == LPI_NO_SLEW)
-				break;
-
-			mutex_lock(&pctrl->lock);
-
-			sval = ioread32(pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
-			sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
-			sval |= arg << slew_offset;
-			iowrite32(sval, pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
-
-			mutex_unlock(&pctrl->lock);
+			ret = lpi_config_set_slew_rate(pctrl, g, group, arg);
+			if (ret)
+				return ret;
 			break;
 		default:
 			return -EINVAL;
@@ -319,7 +338,6 @@ static void lpi_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
 }
 
 #ifdef CONFIG_DEBUG_FS
-#include <linux/seq_file.h>
 
 static unsigned int lpi_regval_to_drive(u32 val)
 {
@@ -439,10 +457,12 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(pctrl->tlmm_base),
 				     "TLMM resource not provided\n");
 
-	pctrl->slew_base = devm_platform_ioremap_resource(pdev, 1);
-	if (IS_ERR(pctrl->slew_base))
-		return dev_err_probe(dev, PTR_ERR(pctrl->slew_base),
-				     "Slew resource not provided\n");
+	if (!(data->flags & LPI_FLAG_SLEW_RATE_SAME_REG)) {
+		pctrl->slew_base = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(pctrl->slew_base))
+			return dev_err_probe(dev, PTR_ERR(pctrl->slew_base),
+					     "Slew resource not provided\n");
+	}
 
 	ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
 	if (ret)