summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/pinctrl/qcom/pinctrl-spmi-mpp.c')
-rw-r--r--drivers/pinctrl/qcom/pinctrl-spmi-mpp.c1012
1 files changed, 1012 insertions, 0 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
new file mode 100644
index 0000000000..fe0393829c
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -0,0 +1,1012 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define PMIC_MPP_ADDRESS_RANGE 0x100
+
+/*
+ * Pull Up Values - it indicates whether a pull-up should be
+ * applied for bidirectional mode only. The hardware ignores the
+ * configuration when operating in other modes.
+ */
+#define PMIC_MPP_PULL_UP_0P6KOHM 0
+#define PMIC_MPP_PULL_UP_10KOHM 1
+#define PMIC_MPP_PULL_UP_30KOHM 2
+#define PMIC_MPP_PULL_UP_OPEN 3
+
+/* type registers base address bases */
+#define PMIC_MPP_REG_TYPE 0x4
+#define PMIC_MPP_REG_SUBTYPE 0x5
+
+/* mpp peripheral type and subtype values */
+#define PMIC_MPP_TYPE 0x11
+#define PMIC_MPP_SUBTYPE_4CH_NO_ANA_OUT 0x3
+#define PMIC_MPP_SUBTYPE_ULT_4CH_NO_ANA_OUT 0x4
+#define PMIC_MPP_SUBTYPE_4CH_NO_SINK 0x5
+#define PMIC_MPP_SUBTYPE_ULT_4CH_NO_SINK 0x6
+#define PMIC_MPP_SUBTYPE_4CH_FULL_FUNC 0x7
+#define PMIC_MPP_SUBTYPE_8CH_FULL_FUNC 0xf
+
+#define PMIC_MPP_REG_RT_STS 0x10
+#define PMIC_MPP_REG_RT_STS_VAL_MASK 0x1
+
+/* control register base address bases */
+#define PMIC_MPP_REG_MODE_CTL 0x40
+#define PMIC_MPP_REG_DIG_VIN_CTL 0x41
+#define PMIC_MPP_REG_DIG_PULL_CTL 0x42
+#define PMIC_MPP_REG_DIG_IN_CTL 0x43
+#define PMIC_MPP_REG_EN_CTL 0x46
+#define PMIC_MPP_REG_AOUT_CTL 0x48
+#define PMIC_MPP_REG_AIN_CTL 0x4a
+#define PMIC_MPP_REG_SINK_CTL 0x4c
+
+/* PMIC_MPP_REG_MODE_CTL */
+#define PMIC_MPP_REG_MODE_VALUE_MASK 0x1
+#define PMIC_MPP_REG_MODE_FUNCTION_SHIFT 1
+#define PMIC_MPP_REG_MODE_FUNCTION_MASK 0x7
+#define PMIC_MPP_REG_MODE_DIR_SHIFT 4
+#define PMIC_MPP_REG_MODE_DIR_MASK 0x7
+
+/* PMIC_MPP_REG_DIG_VIN_CTL */
+#define PMIC_MPP_REG_VIN_SHIFT 0
+#define PMIC_MPP_REG_VIN_MASK 0x7
+
+/* PMIC_MPP_REG_DIG_PULL_CTL */
+#define PMIC_MPP_REG_PULL_SHIFT 0
+#define PMIC_MPP_REG_PULL_MASK 0x7
+
+/* PMIC_MPP_REG_EN_CTL */
+#define PMIC_MPP_REG_MASTER_EN_SHIFT 7
+
+/* PMIC_MPP_REG_AIN_CTL */
+#define PMIC_MPP_REG_AIN_ROUTE_SHIFT 0
+#define PMIC_MPP_REG_AIN_ROUTE_MASK 0x7
+
+#define PMIC_MPP_MODE_DIGITAL_INPUT 0
+#define PMIC_MPP_MODE_DIGITAL_OUTPUT 1
+#define PMIC_MPP_MODE_DIGITAL_BIDIR 2
+#define PMIC_MPP_MODE_ANALOG_BIDIR 3
+#define PMIC_MPP_MODE_ANALOG_INPUT 4
+#define PMIC_MPP_MODE_ANALOG_OUTPUT 5
+#define PMIC_MPP_MODE_CURRENT_SINK 6
+
+#define PMIC_MPP_SELECTOR_NORMAL 0
+#define PMIC_MPP_SELECTOR_PAIRED 1
+#define PMIC_MPP_SELECTOR_DTEST_FIRST 4
+
+#define PMIC_MPP_PHYSICAL_OFFSET 1
+
+/* Qualcomm specific pin configurations */
+#define PMIC_MPP_CONF_AMUX_ROUTE (PIN_CONFIG_END + 1)
+#define PMIC_MPP_CONF_ANALOG_LEVEL (PIN_CONFIG_END + 2)
+#define PMIC_MPP_CONF_DTEST_SELECTOR (PIN_CONFIG_END + 3)
+#define PMIC_MPP_CONF_PAIRED (PIN_CONFIG_END + 4)
+
+/**
+ * struct pmic_mpp_pad - keep current MPP settings
+ * @base: Address base in SPMI device.
+ * @is_enabled: Set to false when MPP should be put in high Z state.
+ * @out_value: Cached pin output value.
+ * @output_enabled: Set to true if MPP output logic is enabled.
+ * @input_enabled: Set to true if MPP input buffer logic is enabled.
+ * @paired: Pin operates in paired mode
+ * @has_pullup: Pin has support to configure pullup
+ * @num_sources: Number of power-sources supported by this MPP.
+ * @power_source: Current power-source used.
+ * @amux_input: Set the source for analog input.
+ * @aout_level: Analog output level
+ * @pullup: Pullup resistor value. Valid in Bidirectional mode only.
+ * @function: See pmic_mpp_functions[].
+ * @drive_strength: Amount of current in sink mode
+ * @dtest: DTEST route selector
+ */
+struct pmic_mpp_pad {
+ u16 base;
+ bool is_enabled;
+ bool out_value;
+ bool output_enabled;
+ bool input_enabled;
+ bool paired;
+ bool has_pullup;
+ unsigned int num_sources;
+ unsigned int power_source;
+ unsigned int amux_input;
+ unsigned int aout_level;
+ unsigned int pullup;
+ unsigned int function;
+ unsigned int drive_strength;
+ unsigned int dtest;
+};
+
+struct pmic_mpp_state {
+ struct device *dev;
+ struct regmap *map;
+ struct pinctrl_dev *ctrl;
+ struct gpio_chip chip;
+};
+
+static const struct pinconf_generic_params pmic_mpp_bindings[] = {
+ {"qcom,amux-route", PMIC_MPP_CONF_AMUX_ROUTE, 0},
+ {"qcom,analog-level", PMIC_MPP_CONF_ANALOG_LEVEL, 0},
+ {"qcom,dtest", PMIC_MPP_CONF_DTEST_SELECTOR, 0},
+ {"qcom,paired", PMIC_MPP_CONF_PAIRED, 0},
+};
+
+#ifdef CONFIG_DEBUG_FS
+static const struct pin_config_item pmic_conf_items[] = {
+ PCONFDUMP(PMIC_MPP_CONF_AMUX_ROUTE, "analog mux", NULL, true),
+ PCONFDUMP(PMIC_MPP_CONF_ANALOG_LEVEL, "analog level", NULL, true),
+ PCONFDUMP(PMIC_MPP_CONF_DTEST_SELECTOR, "dtest", NULL, true),
+ PCONFDUMP(PMIC_MPP_CONF_PAIRED, "paired", NULL, false),
+};
+#endif
+
+static const char *const pmic_mpp_groups[] = {
+ "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8",
+};
+
+#define PMIC_MPP_DIGITAL 0
+#define PMIC_MPP_ANALOG 1
+#define PMIC_MPP_SINK 2
+
+static const char *const pmic_mpp_functions[] = {
+ "digital", "analog", "sink"
+};
+
+static int pmic_mpp_read(struct pmic_mpp_state *state,
+ struct pmic_mpp_pad *pad, unsigned int addr)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(state->map, pad->base + addr, &val);
+ if (ret < 0)
+ dev_err(state->dev, "read 0x%x failed\n", addr);
+ else
+ ret = val;
+
+ return ret;
+}
+
+static int pmic_mpp_write(struct pmic_mpp_state *state,
+ struct pmic_mpp_pad *pad, unsigned int addr,
+ unsigned int val)
+{
+ int ret;
+
+ ret = regmap_write(state->map, pad->base + addr, val);
+ if (ret < 0)
+ dev_err(state->dev, "write 0x%x failed\n", addr);
+
+ return ret;
+}
+
+static int pmic_mpp_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ /* Every PIN is a group */
+ return pctldev->desc->npins;
+}
+
+static const char *pmic_mpp_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned pin)
+{
+ return pctldev->desc->pins[pin].name;
+}
+
+static int pmic_mpp_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ const unsigned **pins, unsigned *num_pins)
+{
+ *pins = &pctldev->desc->pins[pin].number;
+ *num_pins = 1;
+ return 0;
+}
+
+static const struct pinctrl_ops pmic_mpp_pinctrl_ops = {
+ .get_groups_count = pmic_mpp_get_groups_count,
+ .get_group_name = pmic_mpp_get_group_name,
+ .get_group_pins = pmic_mpp_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+ .dt_free_map = pinctrl_utils_free_map,
+};
+
+static int pmic_mpp_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(pmic_mpp_functions);
+}
+
+static const char *pmic_mpp_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ return pmic_mpp_functions[function];
+}
+
+static int pmic_mpp_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned function,
+ const char *const **groups,
+ unsigned *const num_qgroups)
+{
+ *groups = pmic_mpp_groups;
+ *num_qgroups = pctldev->desc->npins;
+ return 0;
+}
+
+static int pmic_mpp_write_mode_ctl(struct pmic_mpp_state *state,
+ struct pmic_mpp_pad *pad)
+{
+ unsigned int mode;
+ unsigned int sel;
+ unsigned int val;
+ unsigned int en;
+
+ switch (pad->function) {
+ case PMIC_MPP_ANALOG:
+ if (pad->input_enabled && pad->output_enabled)
+ mode = PMIC_MPP_MODE_ANALOG_BIDIR;
+ else if (pad->input_enabled)
+ mode = PMIC_MPP_MODE_ANALOG_INPUT;
+ else
+ mode = PMIC_MPP_MODE_ANALOG_OUTPUT;
+ break;
+ case PMIC_MPP_DIGITAL:
+ if (pad->input_enabled && pad->output_enabled)
+ mode = PMIC_MPP_MODE_DIGITAL_BIDIR;
+ else if (pad->input_enabled)
+ mode = PMIC_MPP_MODE_DIGITAL_INPUT;
+ else
+ mode = PMIC_MPP_MODE_DIGITAL_OUTPUT;
+ break;
+ case PMIC_MPP_SINK:
+ default:
+ mode = PMIC_MPP_MODE_CURRENT_SINK;
+ break;
+ }
+
+ if (pad->dtest)
+ sel = PMIC_MPP_SELECTOR_DTEST_FIRST + pad->dtest - 1;
+ else if (pad->paired)
+ sel = PMIC_MPP_SELECTOR_PAIRED;
+ else
+ sel = PMIC_MPP_SELECTOR_NORMAL;
+
+ en = !!pad->out_value;
+
+ val = mode << PMIC_MPP_REG_MODE_DIR_SHIFT |
+ sel << PMIC_MPP_REG_MODE_FUNCTION_SHIFT |
+ en;
+
+ return pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
+}
+
+static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
+ unsigned pin)
+{
+ struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev);
+ struct pmic_mpp_pad *pad;
+ unsigned int val;
+ int ret;
+
+ pad = pctldev->desc->pins[pin].drv_data;
+
+ pad->function = function;
+
+ ret = pmic_mpp_write_mode_ctl(state, pad);
+ if (ret < 0)
+ return ret;
+
+ val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
+
+ return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);
+}
+
+static const struct pinmux_ops pmic_mpp_pinmux_ops = {
+ .get_functions_count = pmic_mpp_get_functions_count,
+ .get_function_name = pmic_mpp_get_function_name,
+ .get_function_groups = pmic_mpp_get_function_groups,
+ .set_mux = pmic_mpp_set_mux,
+};
+
+static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
+ unsigned int pin, unsigned long *config)
+{
+ unsigned param = pinconf_to_config_param(*config);
+ struct pmic_mpp_pad *pad;
+ unsigned arg = 0;
+
+ pad = pctldev->desc->pins[pin].drv_data;
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ if (pad->pullup != PMIC_MPP_PULL_UP_OPEN)
+ return -EINVAL;
+ arg = 1;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ switch (pad->pullup) {
+ case PMIC_MPP_PULL_UP_0P6KOHM:
+ arg = 600;
+ break;
+ case PMIC_MPP_PULL_UP_10KOHM:
+ arg = 10000;
+ break;
+ case PMIC_MPP_PULL_UP_30KOHM:
+ arg = 30000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+ if (pad->is_enabled)
+ return -EINVAL;
+ arg = 1;
+ break;
+ case PIN_CONFIG_POWER_SOURCE:
+ arg = pad->power_source;
+ break;
+ case PIN_CONFIG_INPUT_ENABLE:
+ if (!pad->input_enabled)
+ return -EINVAL;
+ arg = 1;
+ break;
+ case PIN_CONFIG_OUTPUT:
+ arg = pad->out_value;
+ break;
+ case PMIC_MPP_CONF_DTEST_SELECTOR:
+ arg = pad->dtest;
+ break;
+ case PMIC_MPP_CONF_AMUX_ROUTE:
+ arg = pad->amux_input;
+ break;
+ case PMIC_MPP_CONF_PAIRED:
+ if (!pad->paired)
+ return -EINVAL;
+ arg = 1;
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = pad->drive_strength;
+ break;
+ case PMIC_MPP_CONF_ANALOG_LEVEL:
+ arg = pad->aout_level;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Convert register value to pinconf value */
+ *config = pinconf_to_config_packed(param, arg);
+ return 0;
+}
+
+static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *configs, unsigned nconfs)
+{
+ struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev);
+ struct pmic_mpp_pad *pad;
+ unsigned param, arg;
+ unsigned int val;
+ int i, ret;
+
+ pad = pctldev->desc->pins[pin].drv_data;
+
+ /* Make it possible to enable the pin, by not setting high impedance */
+ pad->is_enabled = true;
+
+ for (i = 0; i < nconfs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ pad->pullup = PMIC_MPP_PULL_UP_OPEN;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ switch (arg) {
+ case 600:
+ pad->pullup = PMIC_MPP_PULL_UP_0P6KOHM;
+ break;
+ case 10000:
+ pad->pullup = PMIC_MPP_PULL_UP_10KOHM;
+ break;
+ case 30000:
+ pad->pullup = PMIC_MPP_PULL_UP_30KOHM;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+ pad->is_enabled = false;
+ break;
+ case PIN_CONFIG_POWER_SOURCE:
+ if (arg >= pad->num_sources)
+ return -EINVAL;
+ pad->power_source = arg;
+ break;
+ case PIN_CONFIG_INPUT_ENABLE:
+ pad->input_enabled = arg ? true : false;
+ break;
+ case PIN_CONFIG_OUTPUT:
+ pad->output_enabled = true;
+ pad->out_value = arg;
+ break;
+ case PMIC_MPP_CONF_DTEST_SELECTOR:
+ pad->dtest = arg;
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ pad->drive_strength = arg;
+ break;
+ case PMIC_MPP_CONF_AMUX_ROUTE:
+ if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4)
+ return -EINVAL;
+ pad->amux_input = arg;
+ break;
+ case PMIC_MPP_CONF_ANALOG_LEVEL:
+ pad->aout_level = arg;
+ break;
+ case PMIC_MPP_CONF_PAIRED:
+ pad->paired = !!arg;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ val = pad->power_source << PMIC_MPP_REG_VIN_SHIFT;
+
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_DIG_VIN_CTL, val);
+ if (ret < 0)
+ return ret;
+
+ if (pad->has_pullup) {
+ val = pad->pullup << PMIC_MPP_REG_PULL_SHIFT;
+
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_DIG_PULL_CTL,
+ val);
+ if (ret < 0)
+ return ret;
+ }
+
+ val = pad->amux_input & PMIC_MPP_REG_AIN_ROUTE_MASK;
+
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_AIN_CTL, val);
+ if (ret < 0)
+ return ret;
+
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_AOUT_CTL, pad->aout_level);
+ if (ret < 0)
+ return ret;
+
+ ret = pmic_mpp_write_mode_ctl(state, pad);
+ if (ret < 0)
+ return ret;
+
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength);
+ if (ret < 0)
+ return ret;
+
+ val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
+
+ return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);
+}
+
+static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned pin)
+{
+ struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev);
+ struct pmic_mpp_pad *pad;
+ int ret;
+
+ static const char *const biases[] = {
+ "0.6kOhm", "10kOhm", "30kOhm", "Disabled"
+ };
+
+ pad = pctldev->desc->pins[pin].drv_data;
+
+ seq_printf(s, " mpp%-2d:", pin + PMIC_MPP_PHYSICAL_OFFSET);
+
+ if (!pad->is_enabled) {
+ seq_puts(s, " ---");
+ } else {
+
+ if (pad->input_enabled) {
+ ret = pmic_mpp_read(state, pad, PMIC_MPP_REG_RT_STS);
+ if (ret < 0)
+ return;
+
+ ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
+ pad->out_value = ret;
+ }
+
+ seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
+ seq_printf(s, " %-7s", pmic_mpp_functions[pad->function]);
+ seq_printf(s, " vin-%d", pad->power_source);
+ seq_printf(s, " %d", pad->aout_level);
+ if (pad->has_pullup)
+ seq_printf(s, " %-8s", biases[pad->pullup]);
+ seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
+ if (pad->dtest)
+ seq_printf(s, " dtest%d", pad->dtest);
+ if (pad->paired)
+ seq_puts(s, " paired");
+ }
+}
+
+static const struct pinconf_ops pmic_mpp_pinconf_ops = {
+ .is_generic = true,
+ .pin_config_group_get = pmic_mpp_config_get,
+ .pin_config_group_set = pmic_mpp_config_set,
+ .pin_config_group_dbg_show = pmic_mpp_config_dbg_show,
+};
+
+static int pmic_mpp_direction_input(struct gpio_chip *chip, unsigned pin)
+{
+ struct pmic_mpp_state *state = gpiochip_get_data(chip);
+ unsigned long config;
+
+ config = pinconf_to_config_packed(PIN_CONFIG_INPUT_ENABLE, 1);
+
+ return pmic_mpp_config_set(state->ctrl, pin, &config, 1);
+}
+
+static int pmic_mpp_direction_output(struct gpio_chip *chip,
+ unsigned pin, int val)
+{
+ struct pmic_mpp_state *state = gpiochip_get_data(chip);
+ unsigned long config;
+
+ config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, val);
+
+ return pmic_mpp_config_set(state->ctrl, pin, &config, 1);
+}
+
+static int pmic_mpp_get(struct gpio_chip *chip, unsigned pin)
+{
+ struct pmic_mpp_state *state = gpiochip_get_data(chip);
+ struct pmic_mpp_pad *pad;
+ int ret;
+
+ pad = state->ctrl->desc->pins[pin].drv_data;
+
+ if (pad->input_enabled) {
+ ret = pmic_mpp_read(state, pad, PMIC_MPP_REG_RT_STS);
+ if (ret < 0)
+ return ret;
+
+ pad->out_value = ret & PMIC_MPP_REG_RT_STS_VAL_MASK;
+ }
+
+ return !!pad->out_value;
+}
+
+static void pmic_mpp_set(struct gpio_chip *chip, unsigned pin, int value)
+{
+ struct pmic_mpp_state *state = gpiochip_get_data(chip);
+ unsigned long config;
+
+ config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, value);
+
+ pmic_mpp_config_set(state->ctrl, pin, &config, 1);
+}
+
+static int pmic_mpp_of_xlate(struct gpio_chip *chip,
+ const struct of_phandle_args *gpio_desc,
+ u32 *flags)
+{
+ if (chip->of_gpio_n_cells < 2)
+ return -EINVAL;
+
+ if (flags)
+ *flags = gpio_desc->args[1];
+
+ return gpio_desc->args[0] - PMIC_MPP_PHYSICAL_OFFSET;
+}
+
+static void pmic_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct pmic_mpp_state *state = gpiochip_get_data(chip);
+ unsigned i;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ pmic_mpp_config_dbg_show(state->ctrl, s, i);
+ seq_puts(s, "\n");
+ }
+}
+
+static const struct gpio_chip pmic_mpp_gpio_template = {
+ .direction_input = pmic_mpp_direction_input,
+ .direction_output = pmic_mpp_direction_output,
+ .get = pmic_mpp_get,
+ .set = pmic_mpp_set,
+ .request = gpiochip_generic_request,
+ .free = gpiochip_generic_free,
+ .of_xlate = pmic_mpp_of_xlate,
+ .dbg_show = pmic_mpp_dbg_show,
+};
+
+static int pmic_mpp_populate(struct pmic_mpp_state *state,
+ struct pmic_mpp_pad *pad)
+{
+ int type, subtype, val, dir;
+ unsigned int sel;
+
+ type = pmic_mpp_read(state, pad, PMIC_MPP_REG_TYPE);
+ if (type < 0)
+ return type;
+
+ if (type != PMIC_MPP_TYPE) {
+ dev_err(state->dev, "incorrect block type 0x%x at 0x%x\n",
+ type, pad->base);
+ return -ENODEV;
+ }
+
+ subtype = pmic_mpp_read(state, pad, PMIC_MPP_REG_SUBTYPE);
+ if (subtype < 0)
+ return subtype;
+
+ switch (subtype) {
+ case PMIC_MPP_SUBTYPE_4CH_NO_ANA_OUT:
+ case PMIC_MPP_SUBTYPE_ULT_4CH_NO_ANA_OUT:
+ case PMIC_MPP_SUBTYPE_4CH_NO_SINK:
+ case PMIC_MPP_SUBTYPE_ULT_4CH_NO_SINK:
+ case PMIC_MPP_SUBTYPE_4CH_FULL_FUNC:
+ pad->num_sources = 4;
+ break;
+ case PMIC_MPP_SUBTYPE_8CH_FULL_FUNC:
+ pad->num_sources = 8;
+ break;
+ default:
+ dev_err(state->dev, "unknown MPP type 0x%x at 0x%x\n",
+ subtype, pad->base);
+ return -ENODEV;
+ }
+
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_MODE_CTL);
+ if (val < 0)
+ return val;
+
+ pad->out_value = val & PMIC_MPP_REG_MODE_VALUE_MASK;
+
+ dir = val >> PMIC_MPP_REG_MODE_DIR_SHIFT;
+ dir &= PMIC_MPP_REG_MODE_DIR_MASK;
+
+ switch (dir) {
+ case PMIC_MPP_MODE_DIGITAL_INPUT:
+ pad->input_enabled = true;
+ pad->output_enabled = false;
+ pad->function = PMIC_MPP_DIGITAL;
+ break;
+ case PMIC_MPP_MODE_DIGITAL_OUTPUT:
+ pad->input_enabled = false;
+ pad->output_enabled = true;
+ pad->function = PMIC_MPP_DIGITAL;
+ break;
+ case PMIC_MPP_MODE_DIGITAL_BIDIR:
+ pad->input_enabled = true;
+ pad->output_enabled = true;
+ pad->function = PMIC_MPP_DIGITAL;
+ break;
+ case PMIC_MPP_MODE_ANALOG_BIDIR:
+ pad->input_enabled = true;
+ pad->output_enabled = true;
+ pad->function = PMIC_MPP_ANALOG;
+ break;
+ case PMIC_MPP_MODE_ANALOG_INPUT:
+ pad->input_enabled = true;
+ pad->output_enabled = false;
+ pad->function = PMIC_MPP_ANALOG;
+ break;
+ case PMIC_MPP_MODE_ANALOG_OUTPUT:
+ pad->input_enabled = false;
+ pad->output_enabled = true;
+ pad->function = PMIC_MPP_ANALOG;
+ break;
+ case PMIC_MPP_MODE_CURRENT_SINK:
+ pad->input_enabled = false;
+ pad->output_enabled = true;
+ pad->function = PMIC_MPP_SINK;
+ break;
+ default:
+ dev_err(state->dev, "unknown MPP direction\n");
+ return -ENODEV;
+ }
+
+ sel = val >> PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
+ sel &= PMIC_MPP_REG_MODE_FUNCTION_MASK;
+
+ if (sel >= PMIC_MPP_SELECTOR_DTEST_FIRST)
+ pad->dtest = sel + 1;
+ else if (sel == PMIC_MPP_SELECTOR_PAIRED)
+ pad->paired = true;
+
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_DIG_VIN_CTL);
+ if (val < 0)
+ return val;
+
+ pad->power_source = val >> PMIC_MPP_REG_VIN_SHIFT;
+ pad->power_source &= PMIC_MPP_REG_VIN_MASK;
+
+ if (subtype != PMIC_MPP_SUBTYPE_ULT_4CH_NO_ANA_OUT &&
+ subtype != PMIC_MPP_SUBTYPE_ULT_4CH_NO_SINK) {
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_DIG_PULL_CTL);
+ if (val < 0)
+ return val;
+
+ pad->pullup = val >> PMIC_MPP_REG_PULL_SHIFT;
+ pad->pullup &= PMIC_MPP_REG_PULL_MASK;
+ pad->has_pullup = true;
+ }
+
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_AIN_CTL);
+ if (val < 0)
+ return val;
+
+ pad->amux_input = val >> PMIC_MPP_REG_AIN_ROUTE_SHIFT;
+ pad->amux_input &= PMIC_MPP_REG_AIN_ROUTE_MASK;
+
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_SINK_CTL);
+ if (val < 0)
+ return val;
+
+ pad->drive_strength = val;
+
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_AOUT_CTL);
+ if (val < 0)
+ return val;
+
+ pad->aout_level = val;
+
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL);
+ if (val < 0)
+ return val;
+
+ pad->is_enabled = !!val;
+
+ return 0;
+}
+
+static int pmic_mpp_domain_translate(struct irq_domain *domain,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
+{
+ struct pmic_mpp_state *state = container_of(domain->host_data,
+ struct pmic_mpp_state,
+ chip);
+
+ if (fwspec->param_count != 2 ||
+ fwspec->param[0] < 1 || fwspec->param[0] > state->chip.ngpio)
+ return -EINVAL;
+
+ *hwirq = fwspec->param[0] - PMIC_MPP_PHYSICAL_OFFSET;
+ *type = fwspec->param[1];
+
+ return 0;
+}
+
+static unsigned int pmic_mpp_child_offset_to_irq(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ return offset + PMIC_MPP_PHYSICAL_OFFSET;
+}
+
+static int pmic_mpp_child_to_parent_hwirq(struct gpio_chip *chip,
+ unsigned int child_hwirq,
+ unsigned int child_type,
+ unsigned int *parent_hwirq,
+ unsigned int *parent_type)
+{
+ *parent_hwirq = child_hwirq + 0xc0;
+ *parent_type = child_type;
+
+ return 0;
+}
+
+static void pmic_mpp_irq_mask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+ irq_chip_mask_parent(d);
+ gpiochip_disable_irq(gc, irqd_to_hwirq(d));
+}
+
+static void pmic_mpp_irq_unmask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+ gpiochip_enable_irq(gc, irqd_to_hwirq(d));
+ irq_chip_unmask_parent(d);
+}
+
+static const struct irq_chip pmic_mpp_irq_chip = {
+ .name = "spmi-mpp",
+ .irq_ack = irq_chip_ack_parent,
+ .irq_mask = pmic_mpp_irq_mask,
+ .irq_unmask = pmic_mpp_irq_unmask,
+ .irq_set_type = irq_chip_set_type_parent,
+ .irq_set_wake = irq_chip_set_wake_parent,
+ .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static int pmic_mpp_probe(struct platform_device *pdev)
+{
+ struct irq_domain *parent_domain;
+ struct device_node *parent_node;
+ struct device *dev = &pdev->dev;
+ struct pinctrl_pin_desc *pindesc;
+ struct pinctrl_desc *pctrldesc;
+ struct pmic_mpp_pad *pad, *pads;
+ struct pmic_mpp_state *state;
+ struct gpio_irq_chip *girq;
+ int ret, npins, i;
+ u32 reg;
+
+ ret = of_property_read_u32(dev->of_node, "reg", &reg);
+ if (ret < 0) {
+ dev_err(dev, "missing base address");
+ return ret;
+ }
+
+ npins = (uintptr_t) device_get_match_data(&pdev->dev);
+
+ BUG_ON(npins > ARRAY_SIZE(pmic_mpp_groups));
+
+ state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, state);
+
+ state->dev = &pdev->dev;
+ state->map = dev_get_regmap(dev->parent, NULL);
+
+ pindesc = devm_kcalloc(dev, npins, sizeof(*pindesc), GFP_KERNEL);
+ if (!pindesc)
+ return -ENOMEM;
+
+ pads = devm_kcalloc(dev, npins, sizeof(*pads), GFP_KERNEL);
+ if (!pads)
+ return -ENOMEM;
+
+ pctrldesc = devm_kzalloc(dev, sizeof(*pctrldesc), GFP_KERNEL);
+ if (!pctrldesc)
+ return -ENOMEM;
+
+ pctrldesc->pctlops = &pmic_mpp_pinctrl_ops;
+ pctrldesc->pmxops = &pmic_mpp_pinmux_ops;
+ pctrldesc->confops = &pmic_mpp_pinconf_ops;
+ pctrldesc->owner = THIS_MODULE;
+ pctrldesc->name = dev_name(dev);
+ pctrldesc->pins = pindesc;
+ pctrldesc->npins = npins;
+
+ pctrldesc->num_custom_params = ARRAY_SIZE(pmic_mpp_bindings);
+ pctrldesc->custom_params = pmic_mpp_bindings;
+#ifdef CONFIG_DEBUG_FS
+ pctrldesc->custom_conf_items = pmic_conf_items;
+#endif
+
+ for (i = 0; i < npins; i++, pindesc++) {
+ pad = &pads[i];
+ pindesc->drv_data = pad;
+ pindesc->number = i;
+ pindesc->name = pmic_mpp_groups[i];
+
+ pad->base = reg + i * PMIC_MPP_ADDRESS_RANGE;
+
+ ret = pmic_mpp_populate(state, pad);
+ if (ret < 0)
+ return ret;
+ }
+
+ state->chip = pmic_mpp_gpio_template;
+ state->chip.parent = dev;
+ state->chip.base = -1;
+ state->chip.ngpio = npins;
+ state->chip.label = dev_name(dev);
+ state->chip.of_gpio_n_cells = 2;
+ state->chip.can_sleep = false;
+
+ state->ctrl = devm_pinctrl_register(dev, pctrldesc, state);
+ if (IS_ERR(state->ctrl))
+ return PTR_ERR(state->ctrl);
+
+ parent_node = of_irq_find_parent(state->dev->of_node);
+ if (!parent_node)
+ return -ENXIO;
+
+ parent_domain = irq_find_host(parent_node);
+ of_node_put(parent_node);
+ if (!parent_domain)
+ return -ENXIO;
+
+ girq = &state->chip.irq;
+ gpio_irq_chip_set_chip(girq, &pmic_mpp_irq_chip);
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_level_irq;
+ girq->fwnode = dev_fwnode(state->dev);
+ girq->parent_domain = parent_domain;
+ girq->child_to_parent_hwirq = pmic_mpp_child_to_parent_hwirq;
+ girq->populate_parent_alloc_arg = gpiochip_populate_parent_fwspec_fourcell;
+ girq->child_offset_to_irq = pmic_mpp_child_offset_to_irq;
+ girq->child_irq_domain_ops.translate = pmic_mpp_domain_translate;
+
+ ret = gpiochip_add_data(&state->chip, state);
+ if (ret) {
+ dev_err(state->dev, "can't add gpio chip\n");
+ return ret;
+ }
+
+ ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0, npins);
+ if (ret) {
+ dev_err(dev, "failed to add pin range\n");
+ goto err_range;
+ }
+
+ return 0;
+
+err_range:
+ gpiochip_remove(&state->chip);
+ return ret;
+}
+
+static int pmic_mpp_remove(struct platform_device *pdev)
+{
+ struct pmic_mpp_state *state = platform_get_drvdata(pdev);
+
+ gpiochip_remove(&state->chip);
+ return 0;
+}
+
+static const struct of_device_id pmic_mpp_of_match[] = {
+ { .compatible = "qcom,pm8019-mpp", .data = (void *) 6 },
+ { .compatible = "qcom,pm8226-mpp", .data = (void *) 8 },
+ { .compatible = "qcom,pm8841-mpp", .data = (void *) 4 },
+ { .compatible = "qcom,pm8916-mpp", .data = (void *) 4 },
+ { .compatible = "qcom,pm8941-mpp", .data = (void *) 8 },
+ { .compatible = "qcom,pm8950-mpp", .data = (void *) 4 },
+ { .compatible = "qcom,pmi8950-mpp", .data = (void *) 4 },
+ { .compatible = "qcom,pm8994-mpp", .data = (void *) 8 },
+ { .compatible = "qcom,pma8084-mpp", .data = (void *) 8 },
+ { .compatible = "qcom,pmi8994-mpp", .data = (void *) 4 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, pmic_mpp_of_match);
+
+static struct platform_driver pmic_mpp_driver = {
+ .driver = {
+ .name = "qcom-spmi-mpp",
+ .of_match_table = pmic_mpp_of_match,
+ },
+ .probe = pmic_mpp_probe,
+ .remove = pmic_mpp_remove,
+};
+
+module_platform_driver(pmic_mpp_driver);
+
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC MPP pin control driver");
+MODULE_ALIAS("platform:qcom-spmi-mpp");
+MODULE_LICENSE("GPL v2");